Initial commitHEADmain

1 files changed, 194 insertions, 0 deletions

diff --git a/MIBS/ciena/CIENA-CES-SW-XGRADE-MIB b/MIBS/ciena/CIENA-CES-SW-XGRADE-MIB
new file mode 100644
index 0000000..a05e10e
--- /dev/null
+++ b/MIBS/ciena/CIENA-CES-SW-XGRADE-MIB
@@ -0,0 +1,194 @@
+-- This file was included in Ciena MIB release MIBS-CIENA-CES-08-07-00-024
+ --

+ -- CIENA-CES-SW-XGRADE-MIB.my

+ --

+ 

+ CIENA-CES-SW-XGRADE-MIB DEFINITIONS ::= BEGIN

+

+ IMPORTS       

+   NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY

+	FROM SNMPv2-SMI

+   TruthValue

+	FROM SNMPv2-TC

+   cienaGlobalSeverity, cienaGlobalMacAddress

+	FROM CIENA-GLOBAL-MIB    

+   cienaCesNotifications, cienaCesConfig

+	FROM CIENA-SMI;

+   

+   

+ cienaCesSwXgradeMIB MODULE-IDENTITY

+ 	      LAST-UPDATED "201706070000Z"
+ 	      ORGANIZATION "Ciena Corp."
+ 	      CONTACT-INFO
+ 	      "   Mib Meister
+ 	          7035 Ridge Road
+ 	          Hanover, Maryland 21076
+ 	          USA
+ 	          Phone:  +1 800 921 1144
+ 	          Email:  support@ciena.com"
+ 	      DESCRIPTION

+		       "This module defines the software xgrade related notifications."

+	      REVISION "201706070000Z"
+	      DESCRIPTION
+                      "Updated contact info."
+	      REVISION "201207240000Z"

+	      DESCRIPTION

+                      "Added a new enumeration value to OID cienaCesSwXgradeOp."

+	      REVISION "201005100000Z"

+	      DESCRIPTION

+		       "Initial creation. This module defines the software xgrade related notifications."

+              ::= { cienaCesConfig 13 }

+                  

+ --

+ -- Node definitions

+ --

+   

+ cienaCesSwXgradeMIBObjects OBJECT IDENTIFIER ::= { cienaCesSwXgradeMIB 1 }

+ 

+ --

+ -- Software Xgrade

+ --

+ cienaCesSwXgrade           OBJECT IDENTIFIER ::= { cienaCesSwXgradeMIBObjects 1 }

+ 

+ 

+ -- Notifications 

+  

+ cienaCesSwXgradeMIBNotificationPrefix  OBJECT IDENTIFIER ::= { cienaCesNotifications 13 } 

+ cienaCesSwXgradeMIBNotifications       OBJECT IDENTIFIER ::=  { cienaCesSwXgradeMIBNotificationPrefix 0 }

+

+ -- Conformance information 

+ 

+ cienaCesSwXgradeMIBConformance OBJECT IDENTIFIER ::= { cienaCesSwXgradeMIB 3 } 

+ cienaCesSwXgradeMIBCompliances OBJECT IDENTIFIER ::= { cienaCesSwXgradeMIBConformance 1 }     

+ cienaCesSwXgradeMIBGroups      OBJECT IDENTIFIER ::= { cienaCesSwXgradeMIBConformance 2 }

+

+ 

+ cienaCesSwXgradeGracefulUpgrade OBJECT-TYPE

+  	SYNTAX 			TruthValue

+  	MAX-ACCESS 		accessible-for-notify

+  	STATUS 			current

+  	DESCRIPTION 

+  		"This object specifies whether a graceful upgrade

+  		was issued. Returns True(1) if a graceful upgrade was issued. False(2) otherwise." 

+  	::= { cienaCesSwXgrade 1}

+

+ cienaCesSwXgradeOp   OBJECT-TYPE

+     SYNTAX          INTEGER {

+                        none(0),

+                        download(1),

+                        install(2),

+                        activate(3),

+                        protect(4),

+                        validate(5),

+                        revert(6),  

+                       	configure(7),

+                        run(8),

+			remove(9)

+                     }                  

+     MAX-ACCESS      accessible-for-notify               

+     STATUS          current

+     DESCRIPTION

+         "The possible operations for upgrading the software, including:

+               

+         none:  No upgrade operation is selected.

+

+         download: This operation is to initiate the file transfer of the software package 
+         from the TFTP server specified by cienaCesSwXgradePackagePath to 
+         cienaCesSwXgradeDestPath. The default TFTP server is used for file transfer 
+         if the cienaCesSwXgradeTftpServer is set to an empty string.

+                     

+         install: This operation is to install the software to the standby CTM (if present)
+         and all line modules. The image files are either stored in the TFTP server 
+         specified by cienaCesSwXgradePackagePath and cienaCesSwXgradeTftpServer or in 
+         the compact flash of the active CTM.

+                            

+         activate: This operation is to activate any new software installed on all the modules. 
+         The system automatically reverts to the previous software package if a protect operation 
+         is not set within a time period specified by cienaCesSwXgradeRevertTimeout. If no time 
+         period is specified (cienaCesSwXgradeRevertTimeout value 0), then the system does not 
+         revert automatically and remains in the unprotected state indefinitely. 
+         WARNING: Activating software requires a system restart.

+                                           

+         protect: This operation protects a new software package. If the protect operation 
+         is not entered before the protect timeout is reached (specified by 
+         
cienaCesSwXgradeReverTimeout), the system automatically reverts to the previous
+         software package.  

+

+         revert: This operation reverts to the previous software package.

+

+         validate: This operation validates the software package at the location specified by 
+         the cienaCesSwXgradePackagePath. Setting the cienaCesSwXgradePackagePath to an empty 
+         string validates the installed software.

+

+         run: This operation refers to the downloading, parsing, and executing of a specified 
+         command file as initiated through CLI, DHCP, or the file transfer MIB module. This is 
+         used in appropriate notifications to report the completion of such event. An error is 
+         returned when this object is attempted to be set to this value using an SNMP set-request.

+

+	 remove: This operation is to remove an installed software package from the CTMs and 

+	 all line modules." 

+       ::= { cienaCesSwXgrade 2 }   

+ 

+ cienaCesSwXgradeStatus  OBJECT-TYPE

+     SYNTAX          INTEGER  {

+         success(1),                   -- sucessfully completed

+         failed(2),                    -- Generic Error

+         unknown(3),                   -- no status available

+         processing(4),                -- in progress

+         invalidCfgRule(5),            -- Invalid config applyRule in cmd file

+         invalidFileName(6),           -- Invalid File Name

+         fileSystemError(7),           -- 

+         cannotResolveHostName(8),     -- Cannot resolve hostname

+         tftpClientTimeout(9),         -- TFTP client timeout waiting for server

+         tftpServerError(10),          -- TFTP server reported error

+         tftpBadTag(11),               -- TFTP bad tag from server

+         tftpBadValue(12),             -- TFTP bad value from server

+         networkError(13),             -- 

+         platformTypeNotSupported(14), -- Software package does not support this platform type

+         swMgrBusy(15),                -- SW manager subsystem is busy. Wait and try again

+         needBackupSw(16),             -- Requires backup sw installed

+         internalError(17),            -- system internal error

+         fileNotExist(18),             -- Package path does not exist in local file system

+         missingAttribute(19),         -- Missing attribute(2) for the operation

+         invalidXgradeOp(20),          -- Ivalid XgradeOp code

+         noDefaultTftpConfigured(21),  -- Requires default TFTP server name/address

+         completedWithFailures (22)    -- Upgrade completed but failures were detected
+         }

+     MAX-ACCESS      accessible-for-notify

+     STATUS          current

+     DESCRIPTION

+           "Display the result of the last cienaCesSwXgradeOp. "

+       ::= { cienaCesSwXgrade 3 } 

+   

+  

+ --

+ -- Notifications

+ --

+ cienaCesSwXgradeCompletion NOTIFICATION-TYPE

+     OBJECTS      { 

+				     cienaGlobalSeverity,

+    	    		 cienaGlobalMacAddress,

+                     cienaCesSwXgradeOp,

+                     cienaCesSwXgradeStatus,

+                     cienaCesSwXgradeGracefulUpgrade

+                     

+                  }

+     STATUS    current

+     DESCRIPTION

+        "A cienaCesSwXgradeCompletion notification is sent at the 

+         completion of a cienaCesSwXgradeOp (download/install/activate/
+         ... etc). To enable the device to send this trap, 
+         cienaCesSwXgradeCompletionTrapState must be set to enabled. The

+         cienaCesSwXgradeCompletionTrapState is enabled by default. Variable 
+         bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, 
+         cienaCesSwXgradeOp, cienaCesSwXgradeStatus, and 
+         cienaCesSwXgradeGracefulUpgrade."

+   ::= { cienaCesSwXgradeMIBNotifications 1 }

+

+ END

+ 

+ -- 

+ -- CIENA-CES-SW-XGRADE-MIB

+ --

+ 

+