summaryrefslogtreecommitdiff
path: root/MIBS/cisco/AIRESPACE-SWITCHING-MIB
diff options
context:
space:
mode:
authorDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
committerDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
commit98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch)
tree9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/cisco/AIRESPACE-SWITCHING-MIB
downloadmibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz
mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip
Initial commitHEADmain
Diffstat (limited to 'MIBS/cisco/AIRESPACE-SWITCHING-MIB')
-rw-r--r--MIBS/cisco/AIRESPACE-SWITCHING-MIB4068
1 files changed, 4068 insertions, 0 deletions
diff --git a/MIBS/cisco/AIRESPACE-SWITCHING-MIB b/MIBS/cisco/AIRESPACE-SWITCHING-MIB
new file mode 100644
index 0000000..645161b
--- /dev/null
+++ b/MIBS/cisco/AIRESPACE-SWITCHING-MIB
@@ -0,0 +1,4068 @@
+-- *******************************************************************
+-- Airespace Switching MIB
+-- Copyright 2001 Airespace, Inc. All rights reserved.
+
+-- This SNMP Management Information Specification
+-- embodies Airespace's confidential and proprietary
+-- intellectual property. LVL7 Systems retains all title
+-- and ownership in the Specification including any revisions.
+
+-- This Specification is supplied "AS IS", Airespace
+-- makes no warranty, either expressed or implied,
+-- as to the use, operation, condition, or performance of the
+-- Specification.
+
+
+-- Status: Release
+-- Version: 3.2
+-- Internal Source Code Version:1.75
+-- Date: 19 Dec 2005
+-- *******************************************************************
+
+
+AIRESPACE-SWITCHING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
+ Counter32, Integer32, Unsigned32, TimeTicks
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP,
+ NOTIFICATION-GROUP FROM SNMPv2-CONF
+ DisplayString, PhysAddress,
+ RowStatus, MacAddress, TruthValue FROM SNMPv2-TC
+ airespace FROM AIRESPACE-REF-MIB
+ dot1qVlanIndex, dot1qFdbId FROM Q-BRIDGE-MIB
+ IANAifType FROM IANAifType-MIB;
+
+--********************************************************************
+--* MODULE IDENTITY
+--********************************************************************
+
+ bsnSwitching MODULE-IDENTITY
+ LAST-UPDATED "200604100000Z"
+ ORGANIZATION "Airespace, Inc."
+ CONTACT-INFO
+ " Cisco Systems,
+ Customer Service
+ Postal: 170 West Tasman Drive
+ San Jose, CA 95134
+ USA
+ Tel: +1 800 553-NETS
+
+ Email: cs-wnbu-snmp@cisco.com"
+ DESCRIPTION
+ "This MIB is intended to be implemented on all those
+ devices operating as Central Controllers (CC) that
+ terminate the Light Weight Access Point Protocol
+ tunnel from Light-weight LWAPP Access Points.
+
+ This MIB provides configuration, statistics and
+ status information about the controller.
+ This includes controller statistics and provides
+ information such as Inventory, Trap logs, memory and
+ CPU. This MIB also provides configuration of CLI,
+ SNMP, LAG, DHCP, Spanning Tree, etc.
+
+ The relationship between controller and the LWAPP APs
+ can be depicted as follows:
+
+ +......+ +......+ +......+ +......+
+ + + + + + + + +
+ + CC + + CC + + CC + + CC +
+ + + + + + + + +
+ +......+ +......+ +......+ +......+
+ .. . . .
+ .. . . .
+ . . . . .
+ . . . . .
+ . . . . .
+ . . . . .
+ +......+ +......+ +......+ +......+ +......+
+ + + + + + + + + + +
+ + AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + + +
+ +......+ +......+ +......+ +......+ +......+
+ . . . .
+ . . . . .
+ . . . . .
+ . . . . .
+ . . . . .
+ +......+ +......+ +......+ +......+ +......+
+ + + + + + + + + + +
+ + MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + + +
+ +......+ +......+ +......+ +......+ +......+
+
+
+ The LWAPP tunnel exists between the controller and
+ the APs. The MNs communicate with the APs through
+ the protocol defined by the 802.11 standard.
+
+ LWAPP APs, upon bootup, discover and join one of the
+ controllers and the controller pushes the configuration,
+ that includes the WLAN parameters, to the LWAPP APs.
+ The APs then encapsulate all the 802.11 frames from
+ wireless clients inside LWAPP frames and forward
+ the LWAPP frames to the controller.
+
+ GLOSSARY
+
+ Access Point ( AP )
+
+ An entity that contains an 802.11 medium access
+ control ( MAC ) and physical layer ( PHY ) interface
+ and provides access to the distribution services via
+ the wireless medium for associated clients.
+
+ LWAPP APs encapsulate all the 802.11 frames in
+ LWAPP frames and sends it to the controller to which
+ it is logically connected.
+
+ Basic Service Set Identifier (BSSID)
+
+ The identifier for the service set comprising of
+ all the 802.11 stations under the control of
+ one coordinating Access Point. This identifier
+ happens to be the MAC address of the dot11 radio
+ interface of the Access Point. The wireless
+ clients that associate with the Access Point
+ get the wired uplink through this particular
+ dot11 interface.
+
+ Central Controller ( CC )
+
+ The central entity that terminates the LWAPP protocol
+ tunnel from the LWAPP APs. Throughout this MIB,
+ this entity also referred to as 'controller'.
+
+ Light Weight Access Point Protocol ( LWAPP )
+
+ This is a generic protocol that defines the
+ communication between the Access Points and the
+ Central Controller.
+
+ Mobile Node ( MN )
+
+ A roaming 802.11 wireless device in a wireless
+ network associated with an access point.
+
+ Station Management (SMT)
+
+ This term refers to the internal management of the
+ 802.11 protocol operations by the AP to work
+ cooperatively with the other APs and 802.11
+ devices in the network.
+
+ REFERENCE
+
+ [1] Part 11 Wireless LAN Medium Access Control ( MAC )
+ and Physical Layer ( PHY ) Specifications.
+
+ [2] Draft-obara-capwap-lwapp-00.txt, IETF Light
+ Weight Access Point Protocol. "
+
+ REVISION "200604100000Z"
+
+ DESCRIPTION
+ "Updated MIB with description and format"
+
+ ::= { airespace 1 }
+
+--********************************************************************
+-- Major sections
+--********************************************************************
+
+ agentInfoGroup OBJECT IDENTIFIER ::= { bsnSwitching 1 }
+ agentConfigGroup OBJECT IDENTIFIER ::= { bsnSwitching 2 }
+ agentSystemGroup OBJECT IDENTIFIER ::= { bsnSwitching 3 }
+ stats OBJECT IDENTIFIER ::= { bsnSwitching 4 }
+ switchingTraps OBJECT IDENTIFIER ::= { bsnSwitching 50 }
+ bsnSwitchingGroups OBJECT IDENTIFIER ::= { bsnSwitching 51 }
+ bsnSwitchingCompliances OBJECT IDENTIFIER ::= { bsnSwitching 52 }
+
+
+--********************************************************************
+-- agentInventoryGroup
+--********************************************************************
+
+
+ agentInventoryGroup OBJECT IDENTIFIER ::= { agentInfoGroup 1 }
+
+
+ agentInventorySysDescription OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The switch's Inventory system description."
+ ::= { agentInventoryGroup 1 }
+
+ agentInventoryMachineType OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of the Machine used in the Switch."
+ ::= { agentInventoryGroup 2 }
+
+ agentInventoryMachineModel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The switch's Machine Model. "
+ ::= { agentInventoryGroup 3 }
+
+ agentInventorySerialNumber OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Serial number of the switch."
+ ::= { agentInventoryGroup 4 }
+
+
+ agentInventoryMaintenanceLevel OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The switch's Inventory Maintenance Level"
+ ::= { agentInventoryGroup 6 }
+
+
+ agentInventoryBurnedInMacAddress OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Burned-In MAC Address"
+
+ ::= { agentInventoryGroup 9 }
+
+ agentInventoryOperatingSystem OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Operating System running on this unit"
+ ::= { agentInventoryGroup 10 }
+
+ agentInventoryManufacturerName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the switch manufacturer."
+ ::= { agentInventoryGroup 12 }
+
+ agentInventoryProductName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the product."
+ ::= { agentInventoryGroup 13 }
+
+ agentInventoryProductVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Version of the product."
+ ::= { agentInventoryGroup 14 }
+
+ agentInventoryIsGigECardPresent OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "True if the Switch contains a Gigabit ethernet
+ card
+ ."
+ ::= { agentInventoryGroup 15 }
+
+ agentInventoryIsCryptoCardPresent OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "True if the switch is carrying a Crypto card."
+ ::= { agentInventoryGroup 16 }
+
+ agentInventoryIsForeignAPSupported OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "States whether the switch supports third party
+ Access Points."
+ ::= { agentInventoryGroup 17 }
+
+
+ agentInventoryMaxNumberOfAPsSupported OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum number of APs supported with this
+ Controller."
+
+ ::= { agentInventoryGroup 18 }
+
+ agentInventoryIsCryptoCard2Present OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "True if the switch is carrying second Crypto
+ card for 4400 controller."
+ ::= { agentInventoryGroup 19 }
+
+ agentInventoryFipsModeEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "True if FIPS (Federal Information Processing
+ Standards) mode has been enabled on the
+ controller.False if FIPS mode has not been
+ enabled. FIPS mode can only be enabled through
+ console."
+ DEFVAL {false}
+ ::= { agentInventoryGroup 20 }
+
+
+--********************************************************************
+-- agentTrapLogGroup
+--********************************************************************
+
+ agentTrapLogGroup OBJECT IDENTIFIER ::= { agentInfoGroup 2}
+
+ agentTrapLogTotal OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of traps sent since last
+ reset."
+ ::= { agentTrapLogGroup 1 }
+
+ agentTrapLogTotalSinceLastViewed OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of traps sent since last viewed."
+ ::= { agentTrapLogGroup 3 }
+
+ agentRadioUpDownTrapCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of AP Up/Down traps sent since
+ last reset."
+ ::= { agentTrapLogGroup 5 }
+
+ agentApAssociateDisassociateTrapCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of AP Associate/Disassociate
+ traps sent since last reset."
+ ::= { agentTrapLogGroup 6 }
+
+ agentApLoadProfileFailTrapCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of AP Load Profile Failure
+ traps sent since last reset."
+ ::= { agentTrapLogGroup 7 }
+
+ agentApNoiseProfileFailTrapCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of AP Noise Profile Failure
+ traps sent since last reset."
+ ::= { agentTrapLogGroup 8 }
+
+
+ agentApInterferenceProfileFailTrapCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of AP Interference Profile
+ Failure traps sent since last reset."
+ ::= { agentTrapLogGroup 9 }
+
+ agentApCoverageProfileFailTrapCount OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of AP Coverge Profile Failure
+ traps sent since last reset."
+ ::= { agentTrapLogGroup 10 }
+
+
+--********************************************************************
+-- agentTrapLogTable
+--********************************************************************
+
+ agentTrapLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentTrapLogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Agent Trap Log"
+ ::= { agentTrapLogGroup 4 }
+
+ agentTrapLogEntry OBJECT-TYPE
+ SYNTAX AgentTrapLogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Agent trap log entry"
+ INDEX { agentTrapLogIndex }
+ ::= { agentTrapLogTable 1 }
+
+ AgentTrapLogEntry ::= SEQUENCE {
+ agentTrapLogIndex Integer32,
+ agentTrapLogSystemTime DisplayString,
+ agentTrapLogTrap OCTET STRING
+ }
+
+ agentTrapLogIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Unique index of trap entry"
+ ::= { agentTrapLogEntry 1 }
+
+ agentTrapLogSystemTime OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "System uptime when trap was sent. This entry
+ shows how long the system has been up when the
+ trap occurred."
+ ::= { agentTrapLogEntry 2 }
+
+ agentTrapLogTrap OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..512))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description of the trap sent."
+ ::= { agentTrapLogEntry 22 }
+
+
+--********************************************************************
+-- agentSwitchInfoGroup
+--********************************************************************
+
+ agentSwitchInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 3 }
+
+
+ agentSwitchInfoLwappTransportMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ layer2(1),
+ layer3(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The LWAPP transport mode specifies if the switch
+ is operating in Layer2 or Layer3 mode. This
+ attribute gives the current mode the switch is
+ operating on."
+ ::= { agentSwitchInfoGroup 1 }
+
+ agentSwitchInfoPowerSupply1Present OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is to indicate if the switch has Power
+ Supply 1 present on it. This is applicable to
+ the 4200 series and will always return true for
+ the earlier device versions."
+ ::= { agentSwitchInfoGroup 2 }
+
+ agentSwitchInfoPowerSupply1Operational OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is to indicate if the switch's Power Supply
+ 1 is operational. This is applicable to the
+ 4200 series and will always return true for the
+ earlier device versions."
+ ::= { agentSwitchInfoGroup 3 }
+
+ agentSwitchInfoPowerSupply2Present OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is to indicate if the switch has Power
+ Supply 2 present on it. This is applicable to
+ the 4200 series and will always return false for
+ the earlier device versions."
+ ::= { agentSwitchInfoGroup 4 }
+
+ agentSwitchInfoPowerSupply2Operational OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is to indicate if the switch's Power Supply
+ 2 is operational.This is applicable to the 4200
+ series and will always return false for the
+ earlier device versions."
+ ::= { agentSwitchInfoGroup 5 }
+
+
+--********************************************************************
+-- agentResourceInfoGroup
+--********************************************************************
+
+ agentResourceInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 5 }
+
+ agentCurrentCPUUtilization OBJECT-TYPE
+ SYNTAX INTEGER(0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current CPU Load of the switch in percentage."
+ ::= { agentResourceInfoGroup 1 }
+
+ agentTotalMemory OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Total RAM of the switch in Kbytes."
+ ::= { agentResourceInfoGroup 2 }
+
+ agentFreeMemory OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Free RAM of the switch in Kbytes."
+ ::= { agentResourceInfoGroup 3 }
+
+--********************************************************************
+-- agentWcpInfoGroup
+--********************************************************************
+
+
+ agentWcpInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 6 }
+
+ agentWcpDeviceName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the name of the device this controller
+ is residing on."
+ ::= { agentWcpInfoGroup 1 }
+
+ agentWcpSlotNumber OBJECT-TYPE
+ SYNTAX Unsigned32(1..16)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number on the Wcp Device that this
+ controller is residing on."
+ ::= { agentWcpInfoGroup 2 }
+
+ agentWcpPortNumber OBJECT-TYPE
+ SYNTAX Unsigned32(1..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number on the Wcp Device that this
+ controller is residing on."
+ ::= { agentWcpInfoGroup 3 }
+
+ agentWcpPeerPortNumber OBJECT-TYPE
+ SYNTAX Unsigned32(1..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of this controller's peer on the
+ same slot on Wcp Device that this controller is
+ residing on."
+ ::= { agentWcpInfoGroup 4 }
+
+ agentWcpPeerIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of this controller's peer on the
+ same slot on Wcp Device that this controller is
+ residing on."
+ ::= { agentWcpInfoGroup 5 }
+
+ agentWcpControllerTableChecksum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the checksum that tracks the changes in
+ the agentWcpControllerInfoTable. If there is any
+ change in the information on this table, the
+ checksum changes."
+ ::= { agentWcpInfoGroup 6 }
+
+ agentWcpControllerInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentWcpControllerInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the wireless controllers on a WCP
+ device."
+ ::= { agentWcpInfoGroup 7 }
+
+ agentWcpControllerInfoEntry OBJECT-TYPE
+ SYNTAX AgentWcpControllerInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry for a wireless controller on a WCP
+ device."
+ INDEX { agentWcpControllerInfoSlotNumber,
+ agentWcpControllerInfoPortNumber }
+ ::= { agentWcpControllerInfoTable 1 }
+
+ AgentWcpControllerInfoEntry ::= SEQUENCE {
+ agentWcpControllerInfoSlotNumber Unsigned32,
+ agentWcpControllerInfoPortNumber Unsigned32,
+ agentWcpControllerInfoIpAddress IpAddress
+ }
+
+ agentWcpControllerInfoSlotNumber OBJECT-TYPE
+ SYNTAX Unsigned32(1..16)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The slot number on the Wcp device that a
+ controller is residing on."
+ ::= { agentWcpControllerInfoEntry 1 }
+
+ agentWcpControllerInfoPortNumber OBJECT-TYPE
+ SYNTAX Unsigned32(1..2)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number on the Wcp Device that a
+ controller is residing on."
+ ::= { agentWcpControllerInfoEntry 2 }
+
+ agentWcpControllerInfoIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The management IP Address of a controller."
+ ::= { agentWcpControllerInfoEntry 10 }
+
+
+--********************************************************************
+-- agentProductGroup
+--********************************************************************
+
+ agentProductGroup OBJECT IDENTIFIER ::= { agentInfoGroup 4 }
+
+--********************************************************************
+-- productGroup1. This includes the 4000 switch series: 4012, 4024 and
+-- the 4100 appliance series: 4101 and 4102
+--********************************************************************
+
+ productGroup1 OBJECT IDENTIFIER ::= { agentProductGroup 1 }
+
+--********************************************************************
+-- productGroup2. This includes the Branch Office Switch series
+--********************************************************************
+
+ productGroup2 OBJECT IDENTIFIER ::= { agentProductGroup 2 }
+
+--********************************************************************
+-- productGroup3. This includes the 4200 switch series: 4202 and 4204
+--
+--********************************************************************
+
+ productGroup3 OBJECT IDENTIFIER ::= { agentProductGroup 3 }
+
+--********************************************************************
+-- productGroup4. This includes the Catalyst 6k series with 2
+-- 4204s on a single blade
+--********************************************************************
+
+ productGroup4 OBJECT IDENTIFIER ::= { agentProductGroup 4 }
+
+--********************************************************************
+ agentCLIConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 1 }
+
+--********************************************************************
+-- agentLoginSessionTable
+--********************************************************************
+
+ agentLoginSessionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentLoginSessionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the switch's login session"
+ ::= { agentCLIConfigGroup 1 }
+
+ agentLoginSessionEntry OBJECT-TYPE
+ SYNTAX AgentLoginSessionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Login Session Entry"
+ INDEX { agentLoginSessionIndex }
+ ::= { agentLoginSessionTable 1 }
+
+ AgentLoginSessionEntry ::= SEQUENCE {
+ agentLoginSessionIndex Integer32,
+ agentLoginSessionUserName DisplayString,
+ agentLoginSessionIPAddress IpAddress,
+ agentLoginSessionConnectionType INTEGER,
+ agentLoginSessionIdleTime TimeTicks,
+ agentLoginSessionSessionTime TimeTicks,
+ agentLoginSessionStatus RowStatus
+ }
+
+ agentLoginSessionIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Agent Login Session Index of the switch"
+ ::= { agentLoginSessionEntry 1 }
+
+ agentLoginSessionUserName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Agent Login Session UserName of the switch"
+ ::= { agentLoginSessionEntry 2 }
+
+ agentLoginSessionIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Agent Login Session IP Address of the switch"
+ ::= { agentLoginSessionEntry 3 }
+
+ agentLoginSessionConnectionType OBJECT-TYPE
+ SYNTAX INTEGER {
+ serial(1),
+ telnet(2),
+ web(3),
+ ssl(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Agent Login Session Connection Type of the
+ switch"
+ ::= { agentLoginSessionEntry 4 }
+
+ agentLoginSessionIdleTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Agent Login Session Idle Time of the switch"
+ ::= { agentLoginSessionEntry 5 }
+
+ agentLoginSessionSessionTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Agent Login Session Time of the switch"
+ ::= { agentLoginSessionEntry 6 }
+
+ agentLoginSessionStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Status of the user.
+ active(1) - This connection is active.
+ destroy(6) - Set to this value to disconnect
+ this user."
+ ::= { agentLoginSessionEntry 26 }
+
+
+--********************************************************************
+-- agentTelnetConfigGroup
+--********************************************************************
+
+ agentTelnetConfigGroup OBJECT IDENTIFIER ::= {agentCLIConfigGroup 2}
+
+ agentTelnetLoginTimeout OBJECT-TYPE
+ SYNTAX Integer32 (0..160)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Telnet login timeout (minutes)
+ Config telnet timeout will set the telnet
+ session timeout value. A session is active as
+ long as the session has not remained idle for
+ the value set. Specify a value from 0 to 160.
+ A value of 0 indicates that a Telnet session
+ remains active indefinitely.
+ Note: Changing the timeout value for active
+ sessions does not become effective until the
+ session is reaccessed. Any keystroke will
+ also activate the new timeout duration."
+ ::= { agentTelnetConfigGroup 1 }
+
+ agentTelnetMaxSessions OBJECT-TYPE
+ SYNTAX Integer32 (0..5)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Maximum number of Telnet Sessions
+ Config telnet maxsessions is an integer value
+ from 0 to 5 that specifies the maximum number of
+ telnet sessions that can be established. If the
+ value is 0, no Telnet session can be established."
+ ::= { agentTelnetConfigGroup 2 }
+
+ agentTelnetAllowNewMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allow new telnet sessions (enable or disable)
+ Config telnet disable means that no new Telnet
+ sessions are to be established. Any already
+ established session remains active until
+ the session is ended or an abnormal network error
+ ends it. "
+ ::= { agentTelnetConfigGroup 3 }
+
+ agentSSHAllowNewMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Allow new SSH sessions (enable or disable)
+ Config SSH disable means that no new SSH sessions
+ are to be established. Any already established
+ session remains active until the session is ended
+ or an abnormal network error ends it."
+ ::= { agentTelnetConfigGroup 4 }
+
+--********************************************************************
+-- agentSerialGroup
+--********************************************************************
+
+ agentSerialGroup OBJECT IDENTIFIER ::= { agentCLIConfigGroup 5 }
+
+ agentSerialTimeout OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Agent Serial Timeout "
+ ::= { agentSerialGroup 1 }
+
+ agentSerialBaudrate OBJECT-TYPE
+ SYNTAX INTEGER {
+ baud1200(1),
+ baud2400(2),
+ baud4800(3),
+ baud9600(4),
+ baud19200(5),
+ baud38400(6),
+ baud57600(7),
+ baud115200(8)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Agent Serial Baudrate"
+ ::= { agentSerialGroup 2 }
+
+ agentSerialCharacterSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Agent Serial Character Size"
+ ::= { agentSerialGroup 3 }
+
+ agentSerialHWFlowControlMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Agent Serial Hardware Flow Control."
+ ::= { agentSerialGroup 4 }
+
+ agentSerialStopBits OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Agent Serial Stop Bits"
+ ::= { agentSerialGroup 5 }
+
+ agentSerialParityType OBJECT-TYPE
+ SYNTAX INTEGER {
+ even(1),
+ odd(2),
+ none(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ " Agent Serial Parity Type"
+ ::= { agentSerialGroup 6 }
+
+--*******************************************************************
+-- agentLagConfigGroup
+--********************************************************************
+ agentLagConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 2 }
+
+ agentLagConfigCreate OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..15))
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Create.
+ When this object is set with a non-empty string,
+ a new lag will be created.if possible with the
+ entered string as it's name."
+ ::= { agentLagConfigGroup 1 }
+
+ agentLagSummaryConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentLagSummaryConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "A summary table of the switch's lag config
+ entries"
+ ::= { agentLagConfigGroup 2 }
+
+ agentLagSummaryConfigEntry OBJECT-TYPE
+ SYNTAX AgentLagSummaryConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "Switch's lag config entry"
+ INDEX { agentLagSummaryName }
+ ::= { agentLagSummaryConfigTable 1 }
+
+ AgentLagSummaryConfigEntry ::= SEQUENCE {
+ agentLagSummaryName DisplayString,
+ agentLagSummaryLagIndex Integer32,
+ agentLagSummaryFlushTimer Integer32,
+ agentLagSummaryLinkTrap INTEGER,
+ agentLagSummaryAdminMode INTEGER,
+ agentLagSummaryStpMode INTEGER,
+ agentLagSummaryAddPort Integer32,
+ agentLagSummaryDeletePort Integer32,
+ agentLagSummaryPortsBitMask Unsigned32,
+ agentLagSummaryStatus RowStatus
+ }
+ agentLagSummaryName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..15))
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Name"
+ ::= { agentLagSummaryConfigEntry 1 }
+
+ agentLagSummaryLagIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag If Index"
+ ::= { agentLagSummaryConfigEntry 2 }
+
+
+ agentLagSummaryFlushTimer OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Flush Timer"
+ ::= { agentLagSummaryConfigEntry 3 }
+
+ agentLagSummaryLinkTrap OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Link Trap"
+ ::= { agentLagSummaryConfigEntry 4 }
+
+ agentLagSummaryAdminMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Admin Mode"
+ ::= { agentLagSummaryConfigEntry 5 }
+
+ agentLagSummaryStpMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ dot1d(1),
+ fast(2),
+ off(3)
+ }
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag STP Mode"
+ ::= { agentLagSummaryConfigEntry 6 }
+
+ agentLagSummaryAddPort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Add Port.
+ Note: agentPortType for the port to be added
+ must be full duplex and the same speed as
+ previously added port(s), if any."
+ ::= { agentLagSummaryConfigEntry 7 }
+
+ agentLagSummaryDeletePort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Delete Port"
+ ::= { agentLagSummaryConfigEntry 8 }
+
+ agentLagSummaryPortsBitMask OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Member Ports in bit mask
+ representation"
+ ::= { agentLagSummaryConfigEntry 9 }
+
+ agentLagSummaryStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Agent Lag Status.
+ active(1) - This Lag is enabled.
+ destroy(6) - Set to this value to remove the
+ Lag."
+ ::= { agentLagSummaryConfigEntry 30 }
+
+
+--*******************************************************************
+-- agentLagDetailedConfigTable
+--*******************************************************************
+
+ agentLagDetailedConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentLagDetailedConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "A detailed table of the switch's lag config
+ entries"
+ ::= { agentLagConfigGroup 3 }
+
+ agentLagDetailedConfigEntry OBJECT-TYPE
+ SYNTAX AgentLagDetailedConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "Switch's lag config entry"
+ INDEX { agentLagDetailedLagIndex,
+ agentLagDetailedIfIndex }
+ ::= { agentLagDetailedConfigTable 1 }
+
+ AgentLagDetailedConfigEntry ::= SEQUENCE {
+ agentLagDetailedLagIndex Integer32,
+ agentLagDetailedIfIndex Integer32,
+ agentLagDetailedPortSpeed OBJECT IDENTIFIER
+ }
+
+ agentLagDetailedLagIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "Lag index"
+ ::= { agentLagDetailedConfigEntry 1 }
+
+ agentLagDetailedIfIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "Lag port index"
+ ::= { agentLagDetailedConfigEntry 2 }
+
+ agentLagDetailedPortSpeed OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "Lag port speed. See agentPortType for
+ description and list of valid values."
+ ::= { agentLagDetailedConfigEntry 22 }
+
+
+ agentLagConfigMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(1),
+ on(2)
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The Lag Mode on the 4400 series controller. When
+ it is on, all the gigabit ports are bound to one
+ aggregated link."
+ ::= { agentLagConfigGroup 4 }
+
+
+--********************************************************************
+-- agentNetworkConfigGroup
+--********************************************************************
+
+ agentNetworkConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 3 }
+
+ agentNetworkIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's network ip address"
+ ::= { agentNetworkConfigGroup 1 }
+
+ agentNetworkSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's network subnet mask"
+ ::= { agentNetworkConfigGroup 2 }
+
+ agentNetworkDefaultGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's network default gateway"
+ ::= { agentNetworkConfigGroup 3 }
+
+ agentNetworkBurnedInMacAddress OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The switch's Burned-In MAC address"
+ ::= { agentNetworkConfigGroup 4 }
+
+ agentNetworkConfigProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ bootp(2),
+ dhcp(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's network config protocol"
+ ::= { agentNetworkConfigGroup 7 }
+
+ agentNetworkWebMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's web access mode."
+ ::= { agentNetworkConfigGroup 8 }
+
+ agentNetworkSecureWebMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If https is enable or not provided web mode is
+ enabled"
+ ::= { agentNetworkConfigGroup 9 }
+
+ agentNetworkMulticastMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ unicast(1),
+ multicast(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Switch's ethernet multicast support.
+ disable- multicast is disabled
+ multicast - Multicast is enabled.
+ unicast- Controller will convert multicast to
+ unicast packet."
+ ::= { agentNetworkConfigGroup 10 }
+
+ agentNetworkDsPortNumber OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's distribution port number."
+ ::= { agentNetworkConfigGroup 11 }
+
+ agentNetworkUserIdleTimeout OBJECT-TYPE
+ SYNTAX Unsigned32(10..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the idle user timeout."
+ ::= { agentNetworkConfigGroup 12 }
+
+
+ agentNetworkArpTimeout OBJECT-TYPE
+ SYNTAX Unsigned32(10..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the ARP entry timeout."
+ ::= { agentNetworkConfigGroup 13 }
+
+ agentNetworkManagementVlan OBJECT-TYPE
+ SYNTAX Unsigned32(0..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VLAN ID of the network management interface."
+ ::= { agentNetworkConfigGroup 14 }
+
+ agentNetworkGvrpStatus OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(0) }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The state of GVRP operation on the Switch. The value
+ enabled(1) indicates that GVRP is enabled on this port,
+ as long as dot1qGvrpStatus is also enabled for this
+ device. When disabled(2) but dot1qGvrpStatus is still
+ enabled for the device, GVRP is disabled on this port:
+ any GVRP packets received will be silently discarded and
+ no GVRP registrations will be propagated from other
+ ports. This object affects all GVRP Applicant and
+ Registrar state machines on this port. A transition
+ from disabled(2) to enabled(1) will cause a reset of all
+ GVRP state machines on this port.(Attribute No longer
+ supported)"
+ DEFVAL { enabled }
+ ::= { agentNetworkConfigGroup 15 }
+
+ agentNetworkAllowMgmtViaWireless OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This states whether Management via wireless is
+ allowed or not."
+ ::= { agentNetworkConfigGroup 16 }
+
+ agentNetworkBroadcastSsidMode OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This mode when enabled allows WLAN SSIDs to be
+ broadcasted."
+ ::= { agentNetworkConfigGroup 17 }
+
+ agentNetworkSecureWebPassword OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "SSL Certificate Password. This can be optionally
+ set while downloading SSL certificates of type
+ Web Admin and Web Authentication"
+ ::= { agentNetworkConfigGroup 18 }
+
+ agentNetworkWebAdminCertType OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..80))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of currently existing Web Admin Certificate
+ installed on the Switch. It could be 'Empty' if the
+ certificate is not present, 'Locally Generated' if
+ the certificate is locally generated or it could
+ have a name if it is downloaded externally."
+ ::= { agentNetworkConfigGroup 19 }
+
+ agentNetworkWebAdminCertRegenerateCmdInvoke OBJECT-TYPE
+ SYNTAX INTEGER { default (0), activate (1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This command when set to 'activate' will regenerate
+ a Web Administration Certificate Locally that will
+ replace the existing certificate."
+ ::= { agentNetworkConfigGroup 20 }
+
+ agentNetworkWebAuthCertType OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(1..80))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of currently exisitng Web Authentication
+ Certificate installed on the Switch. It could be
+ 'Empty' if the certificate is not present, 'Locally
+ Generated' if the certificate is locally generated or
+ it could have a name if it is downloaded externally."
+ ::= { agentNetworkConfigGroup 21 }
+
+ agentNetworkWebAuthCertRegenerateCmdInvoke OBJECT-TYPE
+ SYNTAX INTEGER { default (0), activate (1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This command when set to 'activate' will regenerate a
+ Web Authentication Certificate Locally that will
+ replace the existing certificate."
+ ::= { agentNetworkConfigGroup 22 }
+
+ agentNetworkPeerToPeerBlockingMode OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(0)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Mobile Peer to Peer Blocking mode on the switch."
+ ::= { agentNetworkConfigGroup 24 }
+
+ agentNetworkMulticastGroupAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Multicast group address for access points."
+ ::= { agentNetworkConfigGroup 25 }
+
+
+--********************************************************************
+-- agentNeworkRouteTable
+--********************************************************************
+
+ agentNetworkRouteConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentNetworkRouteConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the switch's Network Route entries"
+ ::= { agentNetworkConfigGroup 23 }
+
+ agentNetworkRouteConfigEntry OBJECT-TYPE
+ SYNTAX AgentNetworkRouteConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Switch's Network Route entry"
+ INDEX {agentNetworkRouteIPAddress }
+ ::= { agentNetworkRouteConfigTable 1 }
+
+ AgentNetworkRouteConfigEntry ::= SEQUENCE {
+ agentNetworkRouteIPAddress IpAddress,
+ agentNetworkRouteIPNetmask IpAddress,
+ agentNetworkRouteGateway IpAddress,
+ agentNetworkRouteStatus RowStatus
+ }
+
+ agentNetworkRouteIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Network Route IP Address."
+ ::= { agentNetworkRouteConfigEntry 1 }
+
+ agentNetworkRouteIPNetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ " Network Route IP Netmask."
+ ::= { agentNetworkRouteConfigEntry 2 }
+
+ agentNetworkRouteGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ " Network Route IP Gateway."
+ ::= { agentNetworkRouteConfigEntry 3 }
+
+ agentNetworkRouteStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Network Route Row Status."
+ ::= { agentNetworkRouteConfigEntry 23 }
+
+
+
+--********************************************************************
+-- agentInterfaceConfigTable
+--********************************************************************
+
+ agentInterfaceConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentInterfaceConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the switch's Interface Config entries
+ Typically, it will contain entries for Service
+ Port Interface, DS Port Interface and Virtual
+ Gateway Interface apart from other entries."
+ ::= { agentConfigGroup 13 }
+
+ agentInterfaceConfigEntry OBJECT-TYPE
+ SYNTAX AgentInterfaceConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Switch's Interface Config entry"
+ INDEX { agentInterfaceName }
+ ::= { agentInterfaceConfigTable 1 }
+
+ AgentInterfaceConfigEntry ::= SEQUENCE {
+ agentInterfaceName OCTET STRING,
+ agentInterfaceVlanId Integer32,
+ agentInterfaceType INTEGER,
+ agentInterfaceMacAddress MacAddress,
+ agentInterfaceIPAddress IpAddress,
+ agentInterfaceIPNetmask IpAddress,
+ agentInterfaceIPGateway IpAddress,
+ agentInterfacePortNo Integer32,
+ agentInterfaceActivePortNo Integer32,
+ agentInterfaceBackupPortNo Integer32,
+ agentInterfacePrimaryDhcpAddress IpAddress,
+ agentInterfaceSecondaryDhcpAddress IpAddress,
+ agentInterfaceDhcpProtocol INTEGER,
+ agentInterfaceDnsHostName DisplayString,
+ agentInterfaceAclName DisplayString,
+ agentInterfaceAPManagementFeature INTEGER,
+ agentInterfaceRowStatus RowStatus,
+ agentInterfaceVlanQuarantine TruthValue
+ }
+
+ agentInterfaceName OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Interace Name. This values is 'management' for DS
+ port, 'service-port' for service port and 'virtual'
+ for virtual gateway. For other interfaces, the name
+ can be anything. These interfaces are already created
+ by default."
+ ::= { agentInterfaceConfigEntry 1 }
+
+ agentInterfaceVlanId OBJECT-TYPE
+ SYNTAX Integer32(0..4094)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Vlan ID configured for the Interface."
+ DEFVAL{ 0 }
+ ::= { agentInterfaceConfigEntry 2 }
+
+ agentInterfaceType OBJECT-TYPE
+ SYNTAX INTEGER {
+ static(0),
+ dynamic(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface's type. The static type is set for
+ the interfaces that are created by default on the
+ switch and these cannot be deleted. Any other
+ interface that is created is of type dynamic
+ which can be deleted."
+ ::= { agentInterfaceConfigEntry 3 }
+
+ agentInterfaceMacAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Interface MAC Address. This is only applicable in
+ case of management and service-port interfaces."
+ ::= { agentInterfaceConfigEntry 4 }
+
+ agentInterfaceIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the interface."
+ ::= { agentInterfaceConfigEntry 5 }
+
+ agentInterfaceIPNetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Netmask of the interface. This is 0 for the
+ virtual interface."
+ ::= { agentInterfaceConfigEntry 6 }
+
+ agentInterfaceIPGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Gateway of the interface. This is 0 for virtual
+ and service-port interface."
+ ::= { agentInterfaceConfigEntry 7 }
+
+ agentInterfacePortNo OBJECT-TYPE
+ SYNTAX Integer32(0..25)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A value 0 means the port is not set. The valid value
+ can be any one of the physical ports on the switch.
+ This is the primary port configured on the
+ interface."
+ DEFVAL{ 0 }
+ ::= { agentInterfaceConfigEntry 8 }
+
+ agentInterfacePrimaryDhcpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Primary DHCP Server IP Address for the interface
+ This applies to the management interface and other
+ dynamic interfaces."
+ ::= { agentInterfaceConfigEntry 9 }
+
+ agentInterfaceSecondaryDhcpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Secondary DHCP Server IP Address for the interface.
+ This applies to the management interface and other
+ dynamic interfaces."
+ ::= { agentInterfaceConfigEntry 10 }
+
+ agentInterfaceDhcpProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interface's DHCP protocol. This applies only
+ to the service port interface."
+ ::= { agentInterfaceConfigEntry 11 }
+
+ agentInterfaceDnsHostName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..80))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The DNS host name for the Virtual Interface.
+ This attribute is not valid for other
+ interfaces."
+ ::= { agentInterfaceConfigEntry 12 }
+
+ agentInterfaceAclName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Name of the Access Control List applied to the
+ interface. This attribute is applicable only to
+ the management interface and other dynamic
+ interfaces. If it is required to remove the ACL
+ name for an interface, it should be set to an
+ empty string."
+ ::= { agentInterfaceConfigEntry 13 }
+
+ agentInterfaceAPManagementFeature OBJECT-TYPE
+ SYNTAX INTEGER { disable(0), enable(1) }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "When enabled, the dynamic interface can be used for AP
+ management. SNMP support for AP management through
+ dynamic interfaces has been introduced since '3.0.21.0'
+ release. Only applicable to dynamic interfaces in 4200
+ series. In static interfaces, 'disable' value 0
+ is returned. In 4000/3500 series of switches, 'disable'
+ value 0 is returned."
+ ::= { agentInterfaceConfigEntry 14 }
+
+ agentInterfaceActivePortNo OBJECT-TYPE
+ SYNTAX Integer32(0..25)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the currently active port for this
+ interface."
+ DEFVAL{ 0 }
+ ::= { agentInterfaceConfigEntry 15 }
+
+ agentInterfaceBackupPortNo OBJECT-TYPE
+ SYNTAX Integer32(0..4)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This values is valid only for the 4200 series of
+ switches. The backup port is the port this interface
+ is moved to once the primary port fails. A value 0
+ means the port is not set. The valid value can be
+ any one of the physical ports on the 4200 switch."
+ DEFVAL{ 0 }
+ ::= { agentInterfaceConfigEntry 16 }
+
+agentInterfaceVlanQuarantine OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to configure the health of the
+ interface identified by agentInterfaceName.
+
+ A value of 'true' is used to indicate that this
+ particular interface is unhealthy. In this case,
+ the data packets of the clients, that are assigned
+ the VLAN Id corresponding to this interface, must
+ be tunneled to the Controller by the REAP AP.
+
+ A value of 'false' indicates that the VLAN configured
+ against the interface is healthy and that the REAP
+ AP can switch the clients of this VLAN locally rather
+ than tunneling them to the Controller. "
+ DEFVAL { false }
+ ::= { agentInterfaceConfigEntry 17 }
+
+ agentInterfaceRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interface entry Row status."
+ ::= { agentInterfaceConfigEntry 31 }
+
+
+--********************************************************************
+-- agentNtpConfigGroup - Configuration of Switch Network Time Protocol
+--********************************************************************
+ agentNtpConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 14 }
+
+ agentNtpPollingInterval OBJECT-TYPE
+ SYNTAX Integer32(3600..604800)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Network Time Protocol polling interval. Min value
+ is one hour and maximum is a week."
+ ::= { agentNtpConfigGroup 1 }
+
+--********************************************************************
+-- agentNtpServerTable - Configuration of Network Time Protocol Server
+--********************************************************************
+
+ agentNtpServerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentNtpServerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A summary table for switch's lag config entries"
+ ::= { agentNtpConfigGroup 2 }
+
+ agentNtpServerEntry OBJECT-TYPE
+ SYNTAX AgentNtpServerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Switch's NTP Server entry. Upto 4 entries may be
+ added."
+ INDEX { agentNtpServerIndex }
+ ::= { agentNtpServerTable 1 }
+
+ AgentNtpServerEntry ::= SEQUENCE {
+ agentNtpServerIndex Integer32,
+ agentNtpServerAddress IpAddress,
+ agentNtpServerRowStatus RowStatus
+ }
+
+ agentNtpServerIndex OBJECT-TYPE
+ SYNTAX Integer32(1..3)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "NTP Server priority index."
+ ::= { agentNtpServerEntry 1 }
+
+
+ agentNtpServerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the NTP Server"
+ ::= { agentNtpServerEntry 2 }
+
+ agentNtpServerRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "NTP server entry row status."
+ ::= { agentNtpServerEntry 20 }
+
+
+--********************************************************************
+-- agentDhcpConfigGroup - Configuration of Switch DHCP Server and
+-- its Scopes
+--********************************************************************
+ agentDhcpConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 15 }
+
+ agentDhcpScopeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentDhcpScopeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table listing the Scopes defined on the
+ switch's DHCP Server."
+ ::= { agentDhcpConfigGroup 1 }
+
+ agentDhcpScopeEntry OBJECT-TYPE
+ SYNTAX AgentDhcpScopeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Switch's DHCP Server Scope entry."
+ INDEX { agentDhcpScopeIndex }
+ ::= { agentDhcpScopeTable 1 }
+
+ AgentDhcpScopeEntry ::= SEQUENCE {
+ agentDhcpScopeIndex Unsigned32,
+ agentDhcpScopeName DisplayString,
+ agentDhcpScopeLeaseTime Integer32,
+ agentDhcpScopeNetwork IpAddress,
+ agentDhcpScopeNetmask IpAddress,
+ agentDhcpScopePoolStartAddress IpAddress,
+ agentDhcpScopePoolEndAddress IpAddress,
+ agentDhcpScopeDefaultRouterAddress1 IpAddress,
+ agentDhcpScopeDefaultRouterAddress2 IpAddress,
+ agentDhcpScopeDefaultRouterAddress3 IpAddress,
+ agentDhcpScopeDnsDomainName DisplayString,
+ agentDhcpScopeDnsServerAddress1 IpAddress,
+ agentDhcpScopeDnsServerAddress2 IpAddress,
+ agentDhcpScopeDnsServerAddress3 IpAddress,
+ agentDhcpScopeNetbiosNameServerAddress1 IpAddress,
+ agentDhcpScopeNetbiosNameServerAddress2 IpAddress,
+ agentDhcpScopeNetbiosNameServerAddress3 IpAddress,
+ agentDhcpScopeState INTEGER,
+ agentDhcpScopeRowStatus RowStatus
+ }
+
+ agentDhcpScopeIndex OBJECT-TYPE
+ SYNTAX Unsigned32(0..15)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DHCP Scope Identifier Index."
+ ::= { agentDhcpScopeEntry 1 }
+
+ agentDhcpScopeName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(1..79))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DHCP Scope Name."
+ ::= { agentDhcpScopeEntry 2 }
+
+ agentDhcpScopeLeaseTime OBJECT-TYPE
+ SYNTAX Integer32(120..8640000)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DHCP Scope Lease time in seconds."
+ ::= { agentDhcpScopeEntry 3 }
+
+ agentDhcpScopeNetwork OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the DHCP Scope Network. This is
+ the address which is used to determine the DHCP
+ scope a remote Switch is attaching to."
+ ::= { agentDhcpScopeEntry 4 }
+
+ agentDhcpScopeNetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The DHCP Scope Netmask. This the subnet mask for
+ the address pool."
+ ::= { agentDhcpScopeEntry 5 }
+
+ agentDhcpScopePoolStartAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The DHCP Scope address pool start IP address."
+ ::= { agentDhcpScopeEntry 6 }
+
+ agentDhcpScopePoolEndAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The DHCP Scope address pool end IP address."
+ ::= { agentDhcpScopeEntry 7 }
+
+ agentDhcpScopeDefaultRouterAddress1 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the DHCP Scope's default Router
+ 1."
+ ::= { agentDhcpScopeEntry 8 }
+
+ agentDhcpScopeDefaultRouterAddress2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the DHCP Scope's default Router
+ 2."
+ ::= { agentDhcpScopeEntry 9 }
+
+ agentDhcpScopeDefaultRouterAddress3 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the DHCP Scope's default Router
+ 3."
+ ::= { agentDhcpScopeEntry 10 }
+
+ agentDhcpScopeDnsDomainName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..79))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DNS Domain name for the DHCP Scope."
+ ::= { agentDhcpScopeEntry 11 }
+
+ agentDhcpScopeDnsServerAddress1 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the DHCP Scope's DNS Server 1."
+ ::= { agentDhcpScopeEntry 12 }
+
+ agentDhcpScopeDnsServerAddress2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the DHCP Scope's DNS Server 2."
+ ::= { agentDhcpScopeEntry 13 }
+
+ agentDhcpScopeDnsServerAddress3 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of the DHCP Scope's DNS Server 3."
+ ::= { agentDhcpScopeEntry 14 }
+
+ agentDhcpScopeNetbiosNameServerAddress1 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of DHCP Scope's Netbios Name Server
+ 1."
+ ::= { agentDhcpScopeEntry 15 }
+
+ agentDhcpScopeNetbiosNameServerAddress2 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of DHCP Scope's Netbios Name Server
+ 2."
+ ::= { agentDhcpScopeEntry 16 }
+
+ agentDhcpScopeNetbiosNameServerAddress3 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "IP Address of DHCP Scope's Netbios Name Server
+ 3."
+ ::= { agentDhcpScopeEntry 17 }
+
+ agentDhcpScopeState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DHCP Scope's State."
+ ::= { agentDhcpScopeEntry 18 }
+
+ agentDhcpScopeRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Dhcp Scope entry row status."
+ ::= { agentDhcpScopeEntry 30 }
+
+
+--********************************************************************
+-- agentServicePortConfigGroup
+-- (Interface of type service-port in agentInterfaceConfigTable
+-- use is recommended instead of this group.)
+--********************************************************************
+
+ agentServicePortConfigGroup OBJECT IDENTIFIER ::=
+ { agentConfigGroup 4 }
+
+ agentServicePortIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The switch's Service Port IP address.
+ (Service-port interface use is recommended
+ instead
+ of this group)"
+ ::= { agentServicePortConfigGroup 1 }
+
+ agentServicePortSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The switch's Service Port subnet mask.
+ (Service-port interface in
+ agentInterfaceConfigTable is recommended
+ instead
+ of this group)"
+ ::= { agentServicePortConfigGroup 2 }
+
+ agentServicePortDefaultGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Not Supported for release 1.0. The switch's
+ Service Port default gateway. (Service-port
+ interface in agentInterfaceConfigTable is
+ recommended instead of this group)"
+ ::= { agentServicePortConfigGroup 3 }
+
+ agentServicePortBurnedInMacAddress OBJECT-TYPE
+ SYNTAX PhysAddress
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "The switch's Service Port Burned-In MAC address
+ (Service-port interface in
+ agentInterfaceConfigTable is recommended
+ instead
+ of this group)"
+ ::= { agentServicePortConfigGroup 4 }
+
+ agentServicePortConfigProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ dhcp(3)
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The switch's Service Port config protocol
+ (Service-port interface in
+ agentInterfaceConfigTable is recommended
+ instead
+ of this group)"
+ ::= { agentServicePortConfigGroup 5 }
+
+
+--********************************************************************
+-- agentSnmpConfigGroup
+--********************************************************************
+
+ agentSnmpConfigGroup OBJECT IDENTIFIER ::= {agentConfigGroup 5}
+
+
+ agentSnmpTrapPortNumber OBJECT-TYPE
+ SYNTAX Unsigned32(1..65534)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Snmp Trap Port Number"
+ ::= { agentSnmpConfigGroup 1 }
+
+ agentSnmpVersion1Status OBJECT-TYPE
+ SYNTAX INTEGER{disable(0),enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Snmp Version 1 Status"
+ ::= { agentSnmpConfigGroup 2 }
+
+ agentSnmpVersion2cStatus OBJECT-TYPE
+ SYNTAX INTEGER{disable(0),enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Snmp Version 2c Status"
+ ::= { agentSnmpConfigGroup 3 }
+
+
+--********************************************************************
+-- agentSnmpCommunityConfigTable
+--********************************************************************
+ agentSnmpCommunityConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentSnmpCommunityConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the switch's SNMP community Config
+ entries"
+ ::= { agentSnmpConfigGroup 5 }
+
+ agentSnmpCommunityConfigEntry OBJECT-TYPE
+ SYNTAX AgentSnmpCommunityConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Switch's SNMP community Config entry"
+ INDEX {agentSnmpCommunityName }
+ ::= { agentSnmpCommunityConfigTable 1 }
+
+ AgentSnmpCommunityConfigEntry ::= SEQUENCE {
+ agentSnmpCommunityName DisplayString,
+ agentSnmpCommunityIPAddress IpAddress,
+ agentSnmpCommunityIPMask IpAddress,
+ agentSnmpCommunityAccessMode INTEGER,
+ agentSnmpCommunityEnabled INTEGER,
+ agentSnmpCommunityStatus RowStatus
+ }
+
+ agentSnmpCommunityName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..16))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The switch's Snmp Community Name
+ This name identifies each SNMP community;
+ the name can be up to 16 characters, and it is
+ case-sensitive. Community names in the SNMP
+ community must be unique. If you make multiple
+ entries using the same community name, the first
+ entry is kept and processed and all duplicate
+ entries are ignored. "
+ ::= { agentSnmpCommunityConfigEntry 1 }
+
+ agentSnmpCommunityIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The switch's Snmp Community IP Address
+ Client IP Address - This attribute is an IP
+ address (or portion thereof) from which this
+ device will accept SNMP packets with the
+ associated community. The requesting entity's IP
+ address is logical-ANDed with the Client IP Mask
+ and the result must match the Client IP Address.
+ Note: If the Client IP Mask is set to 0.0.0.0, a
+ Client IP Address of 0.0.0.0 matches all IP
+ addresses."
+ ::= { agentSnmpCommunityConfigEntry 2 }
+
+ agentSnmpCommunityIPMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The switch's Snmp Community
+ IP Mask Client IP Mask - This attribute is a mask
+ to be logical-ANDed with the requesting entity's
+ IP address before comparison with the Client IP
+ Address. If the result matches with Client IP
+ Address then the address is an authenticated IP
+ address. For example, if the Client IP Address
+ is 9.47.128.0 and the corresponding Client IP
+ Mask is 255.255.255.0, a range of incoming IP
+ addresses would match, that is, the incoming IP
+ addresses could be a value in the following
+ range: 9.47.128.0 to 9.47.128.255. To have a
+ specific IP address be the only authenticated IP
+ address, set the Client IP Address to the
+ required IP address and set the Client IP Mask to
+ 255.255.255.255."
+ ::= { agentSnmpCommunityConfigEntry 3 }
+
+ agentSnmpCommunityAccessMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ readOnly(1),
+ readWrite(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The switch's Snmp Community Access Mode
+ Access Mode - This value can be readOnly or
+ readWrite. A community with a read-only access
+ allows for switch information to be displayed.
+ A community with a readWrite access allows for
+ configuration changes to be made and for
+ information to be displayed. "
+ DEFVAL {readOnly}
+ ::= { agentSnmpCommunityConfigEntry 4 }
+
+ agentSnmpCommunityEnabled OBJECT-TYPE
+ SYNTAX INTEGER { no(0), yes(1) }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If community is Enabled "
+ DEFVAL { no }
+ ::= { agentSnmpCommunityConfigEntry 5 }
+
+ agentSnmpCommunityStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The switch's Snmp Community Status.
+ active(1) - This community is active,
+ allowing SNMP manager
+ associated
+ with this community to manage
+ the switch according to its
+ access right.
+
+ notInService(2) - This community is not active;
+ no
+ SNMP requests using this
+ community will be accepted. In
+ this case the SNMP manager
+ associated with this community
+ cannot manage the switch until
+ the Status is changed back to
+ active(1).
+
+ config(3) - The community Status must be
+ set to this value in order to
+ configure it. When creating a
+ new community entry, initial
+ Status will be set to this
+ value.
+
+ destroy(4) - Set to this value to remove
+ the
+ community from the agent."
+ ::= { agentSnmpCommunityConfigEntry 25 }
+
+
+--********************************************************************
+-- agentSnmpTrapReceiverConfigTable
+--********************************************************************
+
+ agentSnmpTrapReceiverConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentSnmpTrapReceiverConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Trap messages are sent across a network to an SNMP
+ Network Manager. These messages alert the manager to
+ events occurring within the switch or on the network.
+ Up to six simultaneous trap receivers are supported."
+ ::= { agentSnmpConfigGroup 6 }
+
+ agentSnmpTrapReceiverConfigEntry OBJECT-TYPE
+ SYNTAX AgentSnmpTrapReceiverConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Switch's Snmp Trap Receiver Config entry"
+ INDEX { agentSnmpTrapReceiverName }
+ ::= { agentSnmpTrapReceiverConfigTable 1 }
+
+ AgentSnmpTrapReceiverConfigEntry ::= SEQUENCE {
+ agentSnmpTrapReceiverName OCTET STRING,
+ agentSnmpTrapReceiverIPAddress IpAddress,
+ agentSnmpTrapReceiverEnabled INTEGER,
+ agentSnmpTrapReceiverStatus RowStatus
+ }
+
+ agentSnmpTrapReceiverName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1..16))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The switch's Snmp Trap Receiver Name.
+ This is the name of the remote network manager.
+ the name can be up to 16 characters,
+ and is case-sensitive."
+ ::= { agentSnmpTrapReceiverConfigEntry 1 }
+
+ agentSnmpTrapReceiverIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "SNMP network Manager IP Address. The IP Address
+ traps will be sent to. Each IP address parameter
+ is four integer numbers. The numbers range from
+ 0 to 255. After creation of entry IP Address
+ cannot be changed."
+ ::= { agentSnmpTrapReceiverConfigEntry 2 }
+
+ agentSnmpTrapReceiverEnabled OBJECT-TYPE
+ SYNTAX INTEGER{no(0),yes(1)}
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The flag to enable the trap receiver. If
+ disabled, no traps are sent to this receiver's
+ IP Address. "
+ DEFVAL{ no }
+ ::= { agentSnmpTrapReceiverConfigEntry 3 }
+
+ agentSnmpTrapReceiverStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to create and delete instances
+ of this table.
+ The row, when created with the row status value
+ of 'createAndGo' or 'createAndWait' is moved to the
+ 'active' state automatically by the agent and remains
+ in that state till the time the row is removed through
+ the 'destroy' option."
+ ::= { agentSnmpTrapReceiverConfigEntry 23 }
+
+--********************************************************************
+-- agentSnmpTrapFlagsConfigGroup
+--********************************************************************
+
+ agentSnmpTrapFlagsConfigGroup OBJECT IDENTIFIER ::=
+ { agentSnmpConfigGroup 7 }
+
+ agentSnmpAuthenticationTrapFlag OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Authentication Flag - Enable/Disable
+ authentication Flag."
+ ::= { agentSnmpTrapFlagsConfigGroup 1 }
+
+ agentSnmpLinkUpDownTrapFlag OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Link Up/Down Flag - Enable/Disable Link Up/Link
+ Down traps for the entire switch. When set to
+ Enable, the Link Up/Down traps will be sent only
+ if the Link Trap flag setting associated with
+ the port (Port Configuration Menu) is set to
+ Enable."
+ ::= { agentSnmpTrapFlagsConfigGroup 2 }
+
+ agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Multiple Users Flag - Enable/Disable Multiple
+ User traps. When the value is set to Enable, a
+ Multiple User Trap is sent whenever someone logs
+ in to the terminal interface (EIA 232 or Telnet)
+ and there is already an existing terminal
+ interface session"
+ ::= { agentSnmpTrapFlagsConfigGroup 3 }
+
+ agentSnmpSpanningTreeTrapFlag OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Spanning Tree Flag - This flag enables the
+ sending of new root traps and topology change
+ notification traps."
+ ::= { agentSnmpTrapFlagsConfigGroup 4 }
+
+ agentSnmpBroadcastStormTrapFlag OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Broadcast Storm Flag - This flag enables or
+ disables the broadcast storm trap. You must also
+ enable Broadcast Storm Recovery Mode
+ (see the Switch Configuration Menu). When this
+ value is set to Enable and Broadcast Storm
+ Recovery mode is set to Enable, the Broadcast
+ Storm Start/End traps are sent when the switch
+ enters and leaves Broadcast Storm Recovery."
+ ::= { agentSnmpTrapFlagsConfigGroup 5 }
+
+--********************************************************************
+-- agentSnmpV3ConfigGroup
+--********************************************************************
+
+ agentSnmpV3ConfigGroup OBJECT IDENTIFIER ::= {agentConfigGroup 6}
+
+
+ agentSnmpVersion3Status OBJECT-TYPE
+ SYNTAX INTEGER{disable(0),enable(1)}
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Snmp Version 3 Status"
+ ::= { agentSnmpV3ConfigGroup 1 }
+
+--********************************************************************
+-- agentSnmpV3UserConfigTable
+--********************************************************************
+
+ agentSnmpV3UserConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentSnmpV3UserConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "User Config Table. Only creation and deletion of
+ users is supported. All individual updates are
+ not supported."
+ ::= { agentSnmpV3ConfigGroup 2 }
+
+ agentSnmpV3UserConfigEntry OBJECT-TYPE
+ SYNTAX AgentSnmpV3UserConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "User Config Entry"
+ INDEX { agentSnmpV3UserName }
+ ::= { agentSnmpV3UserConfigTable 1 }
+
+ AgentSnmpV3UserConfigEntry ::= SEQUENCE {
+ agentSnmpV3UserName OCTET STRING,
+ agentSnmpV3UserAccessMode INTEGER,
+ agentSnmpV3UserAuthenticationType INTEGER,
+ agentSnmpV3UserEncryptionType INTEGER,
+ agentSnmpV3UserAuthenticationPassword OCTET STRING,
+ agentSnmpV3UserEncryptionPassword OCTET STRING,
+ agentSnmpV3UserStatus RowStatus
+ }
+
+ agentSnmpV3UserName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Agent User Name."
+ ::= { agentSnmpV3UserConfigEntry 1 }
+
+ agentSnmpV3UserAccessMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ readonly(1),
+ readwrite(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Agent User Access Mode"
+ ::= { agentSnmpV3UserConfigEntry 2 }
+
+
+ agentSnmpV3UserAuthenticationType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ hmacmd5(2),
+ hmacsha(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 User Authentication
+ none(1) - no authentication used
+ hmacmd5(1) - Use HMAC-MD5 authentication
+ hmacsha(1) - Use HMAC-SHA authentication"
+ ::= { agentSnmpV3UserConfigEntry 3 }
+
+ agentSnmpV3UserEncryptionType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ des(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 User Encryption Must be set to none(1) if
+ agentSnmpV3UserAuthenticationType is set to
+ none(1). Setting this object will set the
+ encryption password to an empty string.
+ none(1) - no encryption used
+ des(1) - DES encryption used"
+ ::= { agentSnmpV3UserConfigEntry 4 }
+
+ agentSnmpV3UserAuthenticationPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 User Encryption Password"
+ ::= { agentSnmpV3UserConfigEntry 5 }
+
+ agentSnmpV3UserEncryptionPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "SNMPv3 User Encryption Password"
+ ::= { agentSnmpV3UserConfigEntry 6 }
+
+ agentSnmpV3UserStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Agent User Status.
+ active(1) - This user account is active.
+ destroy(6) - Set to this value to remove this
+ user account."
+ ::= { agentSnmpV3UserConfigEntry 26 }
+
+
+--********************************************************************
+-- agentSpanningTreePortTable
+--********************************************************************
+ agentSpanningTreeConfigGroup OBJECT IDENTIFIER ::=
+ { agentConfigGroup 7 }
+
+
+ agentSpanningTreeMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's Spanning Tree Switch Status"
+ ::= { agentSpanningTreeConfigGroup 1 }
+
+
+--********************************************************************
+-- agentSwitchConfigGroup
+--********************************************************************
+
+ agentSwitchConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 8
+ }
+
+ agentSwitchAddressAgingTimeoutTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentSwitchAddressAgingTimeoutEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The switch's address aging timeout table"
+ ::= { agentSwitchConfigGroup 4 }
+
+ agentSwitchAddressAgingTimeoutEntry OBJECT-TYPE
+ SYNTAX AgentSwitchAddressAgingTimeoutEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Aging information about a specific Filtering
+ Database."
+ INDEX { dot1qFdbId }
+ ::= { agentSwitchAddressAgingTimeoutTable 1 }
+
+ AgentSwitchAddressAgingTimeoutEntry ::=
+ SEQUENCE {
+ agentSwitchAddressAgingTimeout
+ Integer32
+ }
+
+ agentSwitchAddressAgingTimeout OBJECT-TYPE
+ SYNTAX Integer32 (10..1000000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The FDB entry's address aging timeout(in
+ seconds)"
+ DEFVAL { 300 }
+ ::= { agentSwitchAddressAgingTimeoutEntry 10 }
+
+ agentSwitchBroadcastControlMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch config broadcast allows you to enable
+ or disable broadcast storm recovery mode. When
+ you specify Enable for Broadcast Storm Recovery
+ and the broadcast traffic on any Ethernet port
+ exceeds 20 percent of the link speed, the switch
+ blocks (discards) the broadcast traffic until
+ the broadcast traffic returns to 10 percent or
+ less.Upper limit for 10M link is 20% and lower
+ limit is 10%. For 100M link Upper limit is 5%
+ and lower limit is 2%"
+ ::= { agentSwitchConfigGroup 2 }
+
+ agentSwitchDot3FlowControlMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Config switchconfig flowcontrol allows you to
+ enable or disable 802.3x flow control for the
+ switch. This value applies to only full-duplex
+ mode ports. "
+ ::= { agentSwitchConfigGroup 3 }
+
+ agentSwitchLwappTransportMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ layer2(1),
+ layer3(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The LWAPP transport mode decides if the switch
+ is operating in the Layer2 or Layer3 mode.
+ The switch needs to be rebooted for the mode
+ change to take effect."
+ ::= { agentSwitchConfigGroup 5 }
+
+
+--********************************************************************
+-- agentTransferConfigGroup
+--********************************************************************
+
+ agentTransferConfigGroup OBJECT IDENTIFIER ::=
+ { agentConfigGroup 9 }
+
+
+--*******************************************************************
+-- agentTransferUploadGroup
+--*******************************************************************
+
+ agentTransferUploadGroup OBJECT IDENTIFIER ::=
+ { agentTransferConfigGroup 1 }
+
+ agentTransferUploadMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ tftp(1),
+ xmodem(2),
+ ymodem(3),
+ zmodem(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer upload mode configures the mode to use
+ when uploading from the switch. The mode is
+ either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
+ only when the file transfer is initiated by the
+ serial EIA 232 port."
+ ::= { agentTransferUploadGroup 1 }
+
+ agentTransferUploadServerIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer upload tftpserverip configures the IP
+ address of the server where the file will be
+ uploaded. It is valid only when the Transfer
+ Mode is TFTP. The address is 4 integer bytes
+ ranging from 0 to 255."
+ ::= { agentTransferUploadGroup 2 }
+
+ agentTransferUploadPath OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer upload tftppath configures the
+ directory
+ path where the file is to be uploaded to. The
+ switch remembers the last file path used."
+ ::= { agentTransferUploadGroup 3 }
+
+ agentTransferUploadFilename OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer upload tftpfilename configures the
+ file name for the file being uploaded from the
+ switch. It can be up to 32 alphanumeric
+ characters. The switch remembers the last file
+ name used. File path can be appended to the file
+ name if the string is less than 17 characters.
+ Otherwise, the File Path field will need to be
+ used and the File Name will be appended to the
+ File Path as is. An example would be File Path
+ set to c:\tftp\code\ and File Name set to
+ e1r1v1.opr.
+ Note: File Name, File Path, and TFTP Server IP
+ Address are applicable only if the Transfer Mode
+ is TFTP."
+ ::= { agentTransferUploadGroup 4 }
+
+ agentTransferUploadDataType OBJECT-TYPE
+ SYNTAX INTEGER {
+ config(2),
+ errorlog(3),
+ systemtrace(4),
+ traplog(5),
+ crashfile(6),
+ signatures(7),
+ unknown(99)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer upload datatype configures the type of
+ file to upload from the switch.
+ The types for upload are:
+ - Configuration File
+ - Error log
+ - System trace
+ - Trap log
+ - Crash File
+ "
+ ::= { agentTransferUploadGroup 5 }
+
+
+ agentTransferUploadStart OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer upload start will start an upload
+ transfer. The agentTransferUploadMode object
+ must not be set to xmodem(2), ymodem(3), or
+ zmodem(4) to initiate a transfer via SNMP."
+ ::= { agentTransferUploadGroup 6 }
+
+ agentTransferUploadStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ notInitiated(1),
+ transferStarting(2),
+ errorStarting(3),
+ wrongFileType(4),
+ updatingConfig(5),
+ invalidConfigFile(6),
+ writingToFlash(7),
+ failureWritingToFlash(8),
+ checkingCRC(9),
+ failedCRC(10),
+ unknownDirection(11),
+ transferSuccessful(12),
+ transferFailed(13),
+ unknown(99)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current status of an upload
+ transfer."
+ ::= { agentTransferUploadGroup 7 }
+
+ agentTransferConfigurationFileEncryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The configuration file can be encrypted before
+ tftp upload from the switch and then decrypted
+ before downloading to the switch when this
+ option is enabled."
+ ::= { agentTransferConfigGroup 3 }
+
+ agentTransferConfigurationFileEncryptionKey OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(0..16))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This is the key to be used when encrypting the
+ configuration file while upload from the switch
+ or while decrypting the file after download to
+ the switch."
+ ::= { agentTransferConfigGroup 4 }
+
+
+
+--********************************************************************
+-- agentTransferDownloadGroup
+--********************************************************************
+
+ agentTransferDownloadGroup OBJECT IDENTIFIER ::=
+ { agentTransferConfigGroup 2 }
+
+ agentTransferDownloadMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ tftp(1),
+ xmodem(2),
+ ymodem(3),
+ zmodem(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer download mode configures the mode to
+ use when downloading to the switch. The mode is
+ either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
+ only when the file transfer is initiated by the
+ serial EIA 232 port."
+ ::= { agentTransferDownloadGroup 1 }
+
+ agentTransferDownloadServerIP OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer download tftpserverip configures the IP
+ address of the server where the file is located.
+ It is valid only when the Transfer Mode is TFTP.
+ The address is 4 integer bytes ranging from 0 to
+ 255."
+ ::= { agentTransferDownloadGroup 2 }
+
+ agentTransferDownloadPath OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer download tftppath configures the
+ directory path where the file is located. The
+ switch remembers the last file path used."
+ ::= { agentTransferDownloadGroup 3 }
+
+ agentTransferDownloadFilename OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer download tftpfilename configures the
+ file name for the file being downloaded to the
+ switch. It can be up to 32 alphanumeric
+ characters. The switch remembers the last file
+ name used. File path can be appended to the
+ file name if the string is less than 33
+ characters. Otherwise, the File Path field will
+ need to be used and the File Name will be
+ appended to the File Path as is. An example
+ would be File Path set to c:\tftp\code\
+ and File Name set to e1r1v1.opr. Note: File
+ Name, File Path, and TFTP Server IP Address are
+ applicable only if the Transfer Mode is TFTP."
+
+ ::= { agentTransferDownloadGroup 4 }
+
+ agentTransferDownloadDataType OBJECT-TYPE
+ SYNTAX INTEGER {
+ code(2),
+ config(3),
+ webauthcert(4),
+ webadmincert(5),
+ signatures(6),
+ customWebAuth(7),
+ unknown(99)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer download datatype configures the type
+ of file to downloaded to the switch.
+ The types for download are:
+ - Code
+ - Configuration
+ - Certificates
+ - Signatures
+ - customWebauth- custom webauth tar ball"
+ ::= { agentTransferDownloadGroup 5 }
+
+
+ agentTransferDownloadStart OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Transfer download start will start an download
+ transfer. The agentTransferDownloadMode object
+ must not be set to xmodem(2), ymodem(3), or
+ zmodem(4) to initiate a transfer via SNMP."
+ ::= { agentTransferDownloadGroup 6 }
+
+ agentTransferDownloadStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ notInitiated(1),
+ transferStarting(2),
+ errorStarting(3),
+ wrongFileType(4),
+ updatingConfig(5),
+ invalidConfigFile(6),
+ writingToFlash(7),
+ failureWritingToFlash(8),
+ checkingCRC(9),
+ failedCRC(10),
+ unknownDirection(11),
+ transferSuccessful(12),
+ transferFailed(13),
+ bootBreakOff(14),
+ invalidTarFile(15),
+ unknown(99)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current status of an download
+ transfer."
+ ::= { agentTransferDownloadGroup 7 }
+
+ agentTransferDownloadTftpMaxRetries OBJECT-TYPE
+ SYNTAX Unsigned32(1..254)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Maximum number of retries to be allowed for a
+ TFTP message packet."
+ DEFVAL{ 10 }
+ ::= { agentTransferDownloadGroup 8 }
+
+ agentTransferDownloadTftpTimeout OBJECT-TYPE
+ SYNTAX Unsigned32(1..254)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Timeout in seconds for a TFTP message packet."
+ DEFVAL{ 6 }
+ ::= { agentTransferDownloadGroup 9 }
+
+--********************************************************************
+ -- agentDot3adAggPortTable
+--********************************************************************
+
+ agentDot3adAggPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentDot3adAggPortEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "This table provides 802.3ad link aggregation
+ information for each physical port that is not
+ available through the standard MIB."
+ ::= { agentConfigGroup 11 }
+
+ agentDot3adAggPortEntry OBJECT-TYPE
+ SYNTAX AgentDot3adAggPortEntry
+ MAX-ACCESS not-accessible
+ STATUS obsolete
+ DESCRIPTION
+ "Information about a table entry. The
+ agentDot3adAggPort identifies the external
+ interface number of the port."
+ INDEX { agentDot3adAggPort }
+ ::= { agentDot3adAggPortTable 1 }
+
+ AgentDot3adAggPortEntry ::= SEQUENCE {
+ agentDot3adAggPort Integer32,
+ agentDot3adAggPortLACPMode INTEGER
+ }
+
+ agentDot3adAggPort OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS obsolete
+ DESCRIPTION
+ "ifIndex of this physical port"
+ ::= { agentDot3adAggPortEntry 1 }
+
+ agentDot3adAggPortLACPMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "Enable/disable 802.3ad LACP on this port"
+ ::= { agentDot3adAggPortEntry 21 }
+
+
+--********************************************************************
+ -- agentPortConfigTable
+ --
+--********************************************************************
+
+ agentPortConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AgentPortConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of the switch's physical port config
+ entries"
+ ::= { agentConfigGroup 12 }
+
+ agentPortConfigEntry OBJECT-TYPE
+ SYNTAX AgentPortConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Switch's physical port config entry"
+ INDEX { agentPortDot1dBasePort }
+ ::= { agentPortConfigTable 1 }
+
+ AgentPortConfigEntry ::= SEQUENCE {
+ agentPortDot1dBasePort Integer32,
+ agentPortIfIndex Integer32,
+ agentPortIanaType IANAifType,
+ agentPortSTPMode INTEGER,
+ agentPortSTPState INTEGER,
+ agentPortAdminMode INTEGER,
+ agentPortPhysicalMode INTEGER,
+ agentPortPhysicalStatus INTEGER,
+ agentPortLinkTrapMode INTEGER,
+ agentPortClearStats INTEGER,
+ agentPortDefaultType OBJECT IDENTIFIER,
+ agentPortType OBJECT IDENTIFIER,
+ agentPortAutoNegAdminStatus INTEGER,
+ agentPortDot3FlowControlMode INTEGER,
+ agentPortPowerMode INTEGER,
+ agentPortGvrpStatus INTEGER,
+ agentPortGarpJoinTime Unsigned32,
+ agentPortGarpLeaveTime Unsigned32,
+ agentPortGarpLeaveAllTime Unsigned32,
+ agentPortMirrorMode INTEGER,
+ agentPortMulticastApplianceMode INTEGER,
+ agentPortOperationalStatus INTEGER
+ }
+
+ agentPortDot1dBasePort OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of this port."
+ ::= { agentPortConfigEntry 1 }
+
+ agentPortIfIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The switch's Port IfIndex"
+ ::= { agentPortConfigEntry 2 }
+
+ agentPortIanaType OBJECT-TYPE
+ SYNTAX IANAifType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The switch's Port Type"
+ ::= { agentPortConfigEntry 3 }
+
+ agentPortSTPMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ dot1d(1),
+ fast(2),
+ off(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's Port Spanning Tree Protocol Mode
+ STP mode values are:
+ dot1d (the default)
+ fast, indicates you want to use the fast
+ spanning tree mode
+ off, indicates the STP mode is turned off for a
+ particular port"
+ ::= { agentPortConfigEntry 4 }
+
+ agentPortSTPState OBJECT-TYPE
+ SYNTAX INTEGER {
+ blocking(1),
+ listening(2),
+ learning(3),
+ forwarding(4),
+ disabled(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The switch's Port Spanning Tree Protocol State"
+ ::= { agentPortConfigEntry 5 }
+
+ agentPortAdminMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's Port Admin Mode"
+ ::= { agentPortConfigEntry 6 }
+
+ agentPortPhysicalMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ autoNegotiate(1),
+ half10(2),
+ full10(3),
+ half100(4),
+ full100(5),
+ full1000sx(8)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's Port Speed Mode. This is the
+ configured physical mode.This object is
+ read-only for gigabit ports"
+ ::= { agentPortConfigEntry 7 }
+
+ agentPortPhysicalStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ autonegotiate(1),
+ half10(2),
+ full10(3),
+ half100(4),
+ full100(5),
+ full1000sx(8),
+ unknown(9)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The switch's Port Physical Speed Status.This
+ is the current actual speed."
+ ::= { agentPortConfigEntry 8 }
+
+ agentPortLinkTrapMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If enabled, link up and link down traps will be
+ sent for this port."
+ ::= { agentPortConfigEntry 9 }
+
+ agentPortClearStats OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Clear stats for this port only"
+ ::= { agentPortConfigEntry 10 }
+
+ agentPortDefaultType OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object identifies the default administrative
+ port type, to be used in conjunction with the
+ operational port type denoted by agentPortType.
+
+ The set of possible values for this object is
+ the same as the set defined for the agentPortType
+ object.
+
+ This object represents the administratively-
+ configured
+ type of the MAU. If auto-negotiation is not enabled
+ or is not implemented for this MAU, the value of
+ this object determines the operational type of the
+ MAU. In this case, a set to this object will force
+ the MAU into the specified operating mode.
+
+ If auto-negotiation is implemented and enabled for
+ this MAU, the operational type of the MAU is
+ determined by auto-negotiation, and the value of
+ this object denotes the type to which the MAU will
+ automatically revert if/when auto-negotiation is
+ later disabled.
+
+ The valid values for this object are:
+ dot3MauType10BaseTHD
+ dot3MauType10BaseTFD
+ dot3MauType100BaseTXHD
+ dot3MauType100BaseTXFD
+ dot3MauType100BaseFXFD
+ dot3MauType1000BaseSXFD"
+
+ REFERENCE "RFC 2668"
+ ::= { agentPortConfigEntry 11 }
+
+ agentPortType OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object identifies the port type.
+ An initial set of MAU types are defined in RFC 2668.
+ The assignment of OBJECT IDENTIFIERs to new types of
+ MAUs is managed by the IANA.
+
+ If the MAU type is unknown, the object identifier
+ unknownMauType OBJECT IDENTIFIER ::= { 0 0 }
+ is returned. Note that unknownMauType is a
+ syntactically valid object identifier, and any
+ conformant implementation of ASN.1 and the BER must
+ be able to generate and recognize this value.
+ This object represents the operational type of the
+ MAU, as determined by either (1) the result of the
+ auto-negotiation function or (2) if auto-negotiation
+ is not enabled or is not implemented for this MAU,
+ by the value of the object qbEnetDefaultType, or (3)
+ for the GigE card a value determined by the GBIC
+ connected to the card. In case (2), a set to the
+ object qbEnetPortDefaultType will force the MAU into
+ the new operating mode.
+
+ The valid values for this object are:
+
+ dot3MauType10BaseTHD
+ dot3MauType10BaseTFD
+ dot3MauType100BaseTXHD
+ dot3MauType100BaseTXFD
+ dot3MauType100BaseFXFD
+ dot3MauType1000BaseSXFD"
+
+ REFERENCE "RFC 2668"
+ ::= { agentPortConfigEntry 12 }
+
+ agentPortAutoNegAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object identifies the administration status of
+ auto negotiation for this port."
+ ::= { agentPortConfigEntry 13 }
+
+
+ agentPortDot3FlowControlMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Config flowcontrol allows you to enable or
+ disable 802.3x flow control for this port. This
+ value applies to only full-duplex mode ports."
+ ::= { agentPortConfigEntry 14 }
+
+ agentPortPowerMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(0)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Enable/Disable the port's Power over ethernet. This doesn't
+ apply to appliances that have no POE controller."
+ ::= { agentPortConfigEntry 15 }
+
+ agentPortGvrpStatus OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The state of GVRP operation on this port. The value
+ enabled(1) indicates that GVRP is enabled on this port,
+ as long as dot1qGvrpStatus is also enabled for this
+ device. When disabled(2) but dot1qGvrpStatus is still
+ enabled for the device, GVRP is disabled on this port:
+ any GVRP packets received will be silently discarded and
+ no GVRP registrations will be propagated from other
+ ports. This object affects all GVRP Applicant and
+ Registrar state machines on this port. A transition
+ from disabled(2) to enabled(1) will cause a reset of all
+ GVRP state machines on this port.(Attribute no longer
+ supported)"
+ DEFVAL { enabled }
+ ::= { agentPortConfigEntry 16 }
+
+ agentPortGarpJoinTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The GARP Join time, in centiseconds.(Attribute no longer
+ supported)"
+ DEFVAL { 20 }
+ ::= { agentPortConfigEntry 17 }
+
+ agentPortGarpLeaveTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The GARP Leave time, in centiseconds.(Attribute no
+ longer supported)"
+ DEFVAL { 60 }
+ ::= { agentPortConfigEntry 18 }
+
+ agentPortGarpLeaveAllTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS obsolete
+ DESCRIPTION
+ "The GARP LeaveAll time, in centiseconds.(Attribute no
+ longer supported)"
+ DEFVAL { 1000 }
+ ::= { agentPortConfigEntry 19 }
+
+ agentPortMirrorMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The switch's Port Mirror Mode. If enabled, then
+ this is the port that the packets are mirrored
+ to."
+ ::= { agentPortConfigEntry 20 }
+
+ agentPortMulticastApplianceMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Port Multicast Appliance Mode. If enabled,
+ then this port allows multicast streams through
+ it. At a time, a maximum of four ports including
+ the gigabit ethernet port can have this mode
+ enabled on them. This is to limit the number of
+ multicast streams allowed through the switch
+ at a given time."
+ ::= { agentPortConfigEntry 21 }
+
+ agentPortOperationalStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(1), -- ready to pass packets
+ down(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current operational state of the port."
+ ::= { agentPortConfigEntry 40 }
+
+
+--********************************************************************
+-- agentSystemGroup
+--********************************************************************
+
+ agentSaveConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "save config to NVRAM"
+ ::= { agentSystemGroup 1 }
+
+ agentClearConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "clear config to factory defaults"
+ ::= { agentSystemGroup 2 }
+
+ agentClearLags OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "clear lag configuration"
+ ::= { agentSystemGroup 3 }
+
+ agentClearLoginSessions OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "close all telnet sessions"
+ ::= { agentSystemGroup 4 }
+
+ agentClearPortStats OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "clear all port statistics"
+ ::= { agentSystemGroup 6 }
+
+ agentClearSwitchStats OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "clear all switch statistics"
+ ::= { agentSystemGroup 7 }
+
+ agentClearTrapLog OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "clear trap log"
+ ::= { agentSystemGroup 8 }
+
+
+ agentResetSystem OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "reset the switch"
+ ::= { agentSystemGroup 10 }
+
+
+--********************************************************************
+ -- portStatsTable
+ -- Enterprise portion of Ethernet Statistics Group
+ -- This augments the etherStatsTable of RMON group.
+--********************************************************************
+
+portStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PortStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of additional thernet statistics entries."
+ ::= { stats 1 }
+
+portStatsEntry OBJECT-TYPE
+ SYNTAX PortStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics kept for a particular Ethernet
+ interface."
+ INDEX { portStatsIndex }
+ ::= { portStatsTable 1 }
+
+PortStatsEntry ::= SEQUENCE {
+ portStatsIndex Integer32,
+ portStatsPktsTx64Octets Counter32,
+ portStatsPktsTx65to127Octets Counter32,
+ portStatsPktsTx128to255Octets Counter32,
+ portStatsPktsTx256to511Octets Counter32,
+ portStatsPktsTx512to1023Octets Counter32,
+ portStatsPktsTx1024to1518Octets Counter32,
+ portStatsPktsRx1519to1530Octets Counter32,
+ portStatsPktsTx1519to1530Octets Counter32,
+ portStatsPktsTxOversizeOctets Counter32
+ }
+
+ portStatsIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of this object uniquely identifies
+ this portStatsEntry."
+ ::= { portStatsEntry 1 }
+
+ portStatsPktsTx64Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) transmitted that were 64 octets in length
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 2 }
+
+ portStatsPktsTx65to127Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) transmitted that were between
+ 65 and 127 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 3 }
+
+ portStatsPktsTx128to255Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) transmitted that were between
+ 128 and 255 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 4 }
+
+ portStatsPktsTx256to511Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) transmitted that were between
+ 256 and 511 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 5 }
+
+ portStatsPktsTx512to1023Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) transmitted that were between
+ 512 and 1023 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 6 }
+
+ portStatsPktsTx1024to1518Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) transmitted that were between
+ 1024 and 1518 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 7 }
+
+ portStatsPktsRx1519to1530Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 1519 and 1530 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 8 }
+
+ portStatsPktsTx1519to1530Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) transmitted that were between
+ 1519 and 1530 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 9 }
+
+
+ portStatsPktsTxOversizeOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) transmitted that were more than
+ 1530 octets in length.
+ (excluding framing bits but including FCS octets)."
+ ::= { portStatsEntry 30 }
+
+
+--********************************************************************
+-- switchingTraps
+--********************************************************************
+
+ multipleUsersTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Multiple Users Log Trap."
+ ::= { switchingTraps 1 }
+
+ broadcastStormStartTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Broadcast Storm Start Log Trap."
+ ::= { switchingTraps 2 }
+
+ broadcastStormEndTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Broadcast Storm End Log Trap."
+ ::= { switchingTraps 3 }
+
+ linkFailureTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "trapMgrLinkFailureLogTrap."
+ ::= { switchingTraps 4 }
+
+ vlanRequestFailureTrap NOTIFICATION-TYPE
+ OBJECTS {
+ dot1qVlanIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "Vlan Request Failure Log Trap"
+ ::= { switchingTraps 5 }
+
+ vlanDeleteLastTrap NOTIFICATION-TYPE
+ OBJECTS {
+ dot1qVlanIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "Last Vlan Delete Log Trap"
+ ::= { switchingTraps 6 }
+
+ vlanDefaultCfgFailureTrap NOTIFICATION-TYPE
+ OBJECTS {
+ dot1qVlanIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "Default Vlan Config Failure Log Trap"
+ ::= { switchingTraps 7 }
+
+ vlanRestoreFailureTrap NOTIFICATION-TYPE
+ OBJECTS {
+ dot1qVlanIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "Vlan Restore Failure Log Trap"
+ ::= { switchingTraps 8 }
+
+ fanFailureTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Fan Failure Log Trap."
+ ::= { switchingTraps 9 }
+
+ stpInstanceNewRootTrap NOTIFICATION-TYPE
+ OBJECTS {
+ dot1qVlanIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "STP Instance New Root Trap"
+ ::= { switchingTraps 10 }
+
+ stpInstanceTopologyChangeTrap NOTIFICATION-TYPE
+ OBJECTS {
+ dot1qVlanIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "STP Instance Topology Change Trap"
+ ::= { switchingTraps 11 }
+
+ powerSupplyStatusChangeTrap NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "Power Supply Status Change Trap"
+ ::= { switchingTraps 12 }
+
+
+--********************************************************************
+--* Compliance statements
+--********************************************************************
+bsnSwitchingCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the SNMP entities that
+ implement the bsnSwitching module"
+
+ MODULE
+ MANDATORY-GROUPS { bsnSwitchingAgentInfoGroup,
+ bsnSwitchingAgentConfigGroup,
+ bsnSwitchingAgentSystemGroup,
+ bsnSwitchingAgentStatsGroup }
+ ::= { bsnSwitchingCompliances 1 }
+
+--********************************************************************
+--* Units of conformance
+--********************************************************************
+bsnSwitchingAgentInfoGroup OBJECT-GROUP
+ OBJECTS {
+ agentInventorySysDescription,
+ agentInventoryMachineType,
+ agentInventoryMachineModel,
+ agentInventorySerialNumber,
+ agentInventoryMaintenanceLevel,
+ agentInventoryBurnedInMacAddress,
+ agentInventoryOperatingSystem,
+ agentInventoryManufacturerName,
+ agentInventoryProductName,
+ agentInventoryProductVersion,
+ agentInventoryIsGigECardPresent,
+ agentInventoryIsCryptoCardPresent,
+ agentInventoryIsForeignAPSupported,
+ agentInventoryMaxNumberOfAPsSupported,
+ agentInventoryIsCryptoCard2Present,
+ agentInventoryFipsModeEnabled,
+ agentTrapLogTotal,
+ agentTrapLogTotalSinceLastViewed,
+ agentTrapLogIndex,
+ agentTrapLogSystemTime,
+ agentTrapLogTrap,
+ agentRadioUpDownTrapCount,
+ agentApAssociateDisassociateTrapCount,
+ agentApLoadProfileFailTrapCount,
+ agentApNoiseProfileFailTrapCount,
+ agentApInterferenceProfileFailTrapCount,
+ agentApCoverageProfileFailTrapCount,
+ agentSwitchInfoLwappTransportMode,
+ agentSwitchInfoPowerSupply1Present,
+ agentSwitchInfoPowerSupply1Operational,
+ agentSwitchInfoPowerSupply2Present,
+ agentSwitchInfoPowerSupply2Operational,
+ agentCurrentCPUUtilization,
+ agentTotalMemory,
+ agentFreeMemory,
+ agentWcpDeviceName,
+ agentWcpSlotNumber,
+ agentWcpPortNumber,
+ agentWcpPeerPortNumber,
+ agentWcpPeerIpAddress,
+ agentWcpControllerTableChecksum,
+ agentWcpControllerInfoSlotNumber,
+ agentWcpControllerInfoPortNumber,
+ agentWcpControllerInfoIpAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "This collection of objects provide switching information."
+ ::= { bsnSwitchingGroups 1}
+
+
+bsnSwitchingAgentConfigGroup OBJECT-GROUP
+ OBJECTS {
+ agentLoginSessionIndex,
+ agentLoginSessionUserName,
+ agentLoginSessionIPAddress,
+ agentLoginSessionConnectionType,
+ agentLoginSessionIdleTime,
+ agentLoginSessionSessionTime,
+ agentLoginSessionStatus,
+ agentTelnetLoginTimeout,
+ agentTelnetMaxSessions,
+ agentTelnetAllowNewMode,
+ agentSSHAllowNewMode,
+ agentSerialTimeout,
+ agentSerialBaudrate,
+ agentSerialCharacterSize,
+ agentSerialHWFlowControlMode,
+ agentSerialStopBits,
+ agentSerialParityType,
+ agentNetworkIPAddress,
+ agentNetworkSubnetMask,
+ agentNetworkDefaultGateway,
+ agentNetworkBurnedInMacAddress,
+ agentNetworkConfigProtocol,
+ agentNetworkWebMode,
+ agentNetworkSecureWebMode,
+ agentNetworkMulticastMode,
+ agentNetworkDsPortNumber,
+ agentNetworkUserIdleTimeout,
+ agentNetworkArpTimeout,
+ agentNetworkManagementVlan,
+ agentNetworkAllowMgmtViaWireless,
+ agentNetworkBroadcastSsidMode,
+ agentNetworkSecureWebPassword,
+ agentNetworkWebAdminCertType,
+ agentNetworkWebAuthCertRegenerateCmdInvoke,
+ agentNetworkWebAdminCertRegenerateCmdInvoke,
+ agentNetworkWebAuthCertType,
+ agentNetworkRouteIPAddress,
+ agentNetworkRouteIPNetmask,
+ agentNetworkRouteGateway,
+ agentNetworkRouteStatus,
+ agentNetworkPeerToPeerBlockingMode,
+ agentNetworkMulticastGroupAddress,
+ agentInterfaceName,
+ agentInterfaceVlanId,
+ agentInterfaceType,
+ agentInterfaceMacAddress,
+ agentInterfaceIPAddress,
+ agentInterfaceIPNetmask,
+ agentInterfaceIPGateway,
+ agentInterfacePortNo,
+ agentInterfacePrimaryDhcpAddress,
+ agentInterfaceSecondaryDhcpAddress,
+ agentInterfaceDhcpProtocol,
+ agentInterfaceDnsHostName,
+ agentInterfaceAclName,
+ agentInterfaceAPManagementFeature,
+ agentInterfaceActivePortNo,
+ agentInterfaceBackupPortNo,
+ agentInterfaceVlanQuarantine,
+ agentInterfaceRowStatus,
+ agentNtpPollingInterval,
+ agentNtpServerIndex,
+ agentNtpServerAddress,
+ agentNtpServerRowStatus,
+ agentDhcpScopeIndex,
+ agentDhcpScopeName,
+ agentDhcpScopeLeaseTime,
+ agentDhcpScopeNetwork,
+ agentDhcpScopeNetmask,
+ agentDhcpScopePoolStartAddress,
+ agentDhcpScopePoolEndAddress,
+ agentDhcpScopeDefaultRouterAddress1,
+ agentDhcpScopeDefaultRouterAddress2,
+ agentDhcpScopeDefaultRouterAddress3,
+ agentDhcpScopeDnsDomainName,
+ agentDhcpScopeDnsServerAddress1,
+ agentDhcpScopeDnsServerAddress2,
+ agentDhcpScopeDnsServerAddress3,
+ agentDhcpScopeNetbiosNameServerAddress1,
+ agentDhcpScopeNetbiosNameServerAddress2,
+ agentDhcpScopeNetbiosNameServerAddress3,
+ agentDhcpScopeState,
+ agentDhcpScopeRowStatus,
+ agentSnmpTrapPortNumber,
+ agentSnmpVersion1Status,
+ agentSnmpVersion2cStatus,
+ agentSnmpCommunityName,
+ agentSnmpCommunityIPAddress,
+ agentSnmpCommunityIPMask,
+ agentSnmpCommunityAccessMode,
+ agentSnmpCommunityEnabled,
+ agentSnmpCommunityStatus,
+ agentSnmpTrapReceiverName,
+ agentSnmpTrapReceiverIPAddress,
+ agentSnmpTrapReceiverEnabled,
+ agentSnmpTrapReceiverStatus,
+ agentSnmpAuthenticationTrapFlag,
+ agentSnmpLinkUpDownTrapFlag,
+ agentSnmpMultipleUsersTrapFlag,
+ agentSnmpSpanningTreeTrapFlag,
+ agentSnmpVersion3Status,
+ agentSnmpV3UserName,
+ agentSnmpV3UserAccessMode,
+ agentSnmpV3UserAuthenticationType,
+ agentSnmpV3UserEncryptionType,
+ agentSnmpV3UserAuthenticationPassword,
+ agentSnmpV3UserEncryptionPassword,
+ agentSnmpV3UserStatus,
+ agentSpanningTreeMode,
+ agentSwitchAddressAgingTimeout,
+ agentSwitchBroadcastControlMode,
+ agentSwitchDot3FlowControlMode,
+ agentSwitchLwappTransportMode,
+ agentTransferUploadMode,
+ agentTransferUploadServerIP,
+ agentTransferUploadPath,
+ agentTransferUploadFilename,
+ agentTransferUploadDataType,
+ agentTransferUploadStart,
+ agentTransferUploadStatus,
+ agentTransferConfigurationFileEncryption,
+ agentTransferConfigurationFileEncryptionKey,
+ agentTransferDownloadMode,
+ agentTransferDownloadServerIP,
+ agentTransferDownloadPath,
+ agentTransferDownloadFilename,
+ agentTransferDownloadDataType,
+ agentTransferDownloadStart,
+ agentTransferDownloadStatus,
+ agentTransferDownloadTftpMaxRetries,
+ agentTransferDownloadTftpTimeout,
+ agentPortDot1dBasePort,
+ agentPortIfIndex,
+ agentPortIanaType,
+ agentPortSTPMode,
+ agentPortSTPState,
+ agentPortAdminMode,
+ agentPortPhysicalMode,
+ agentPortPhysicalStatus,
+ agentPortLinkTrapMode,
+ agentPortClearStats,
+ agentPortDefaultType,
+ agentPortType,
+ agentPortAutoNegAdminStatus,
+ agentPortDot3FlowControlMode,
+ agentPortPowerMode,
+ agentPortMirrorMode,
+ agentPortMulticastApplianceMode,
+ agentPortOperationalStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "This collection of objects provide switching configuration
+ information."
+ ::= { bsnSwitchingGroups 2}
+
+bsnSwitchingAgentSystemGroup OBJECT-GROUP
+ OBJECTS {
+ agentSaveConfig,
+ agentClearConfig,
+ agentClearLags,
+ agentClearLoginSessions,
+ agentClearPortStats,
+ agentClearSwitchStats,
+ agentClearTrapLog,
+ agentResetSystem
+ }
+ STATUS current
+ DESCRIPTION
+ "This collection of objects provide switching system
+ information and config."
+ ::= { bsnSwitchingGroups 3 }
+
+
+bsnSwitchingAgentStatsGroup OBJECT-GROUP
+ OBJECTS {
+ portStatsIndex,
+ portStatsPktsTx64Octets,
+ portStatsPktsTx65to127Octets,
+ portStatsPktsTx128to255Octets,
+ portStatsPktsTx256to511Octets,
+ portStatsPktsTx512to1023Octets,
+ portStatsPktsTx1024to1518Octets,
+ portStatsPktsRx1519to1530Octets,
+ portStatsPktsTx1519to1530Octets,
+ portStatsPktsTxOversizeOctets
+ }
+ STATUS current
+ DESCRIPTION
+ "This collection of objects provide switching statistics."
+ ::= { bsnSwitchingGroups 4 }
+
+bsnSwitchingObsGroup OBJECT-GROUP
+ OBJECTS {
+ agentLagConfigCreate,
+ agentLagSummaryName,
+ agentLagSummaryLagIndex,
+ agentLagSummaryLinkTrap,
+ agentLagSummaryAdminMode,
+ agentLagSummaryStpMode,
+ agentLagSummaryAddPort,
+ agentLagSummaryDeletePort,
+ agentLagSummaryPortsBitMask,
+ agentLagSummaryStatus,
+ agentLagDetailedLagIndex,
+ agentLagDetailedIfIndex,
+ agentLagDetailedPortSpeed,
+ agentLagConfigMode,
+ agentServicePortIPAddress,
+ agentServicePortSubnetMask,
+ agentServicePortBurnedInMacAddress,
+ agentServicePortConfigProtocol,
+ agentSnmpBroadcastStormTrapFlag,
+ agentDot3adAggPort,
+ agentDot3adAggPortLACPMode,
+ agentNetworkGvrpStatus,
+ agentPortGvrpStatus,
+ agentPortGarpJoinTime,
+ agentPortGarpLeaveTime,
+ agentPortGarpLeaveAllTime,
+ agentLagSummaryFlushTimer,
+ agentServicePortDefaultGateway
+ }
+ STATUS obsolete
+ DESCRIPTION
+ "This collection of objects are obsoleted in bsnSwitching
+ module."
+ ::= { bsnSwitchingGroups 5 }
+
+bsnSwitchingTrap NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ multipleUsersTrap,
+ broadcastStormStartTrap,
+ broadcastStormEndTrap,
+ linkFailureTrap,
+ vlanRequestFailureTrap,
+ vlanDeleteLastTrap,
+ vlanDefaultCfgFailureTrap,
+ vlanRestoreFailureTrap,
+ fanFailureTrap,
+ stpInstanceNewRootTrap,
+ stpInstanceTopologyChangeTrap,
+ powerSupplyStatusChangeTrap
+ }
+ STATUS current
+ DESCRIPTION
+ "This collection of objects provides switching related
+ notification."
+ ::= { bsnSwitchingGroups 6 }
+
+--********************************************************************
+--* End of units of conformance
+--********************************************************************
+
+
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 12:56:37 +0000