Initial commitHEADmain

1 files changed, 2207 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-FRAME-RELAY-MIB b/MIBS/cisco/CISCO-FRAME-RELAY-MIB
new file mode 100644
index 0000000..f0427dc
--- /dev/null
+++ b/MIBS/cisco/CISCO-FRAME-RELAY-MIB
@@ -0,0 +1,2207 @@
+--------------------------------------------------------------------
+-- CISCO-FRAME-RELAY-MIB.my
+--        Cisco Frame Relay MIB file, providing Frame Relay specific
+--        information that are either excluded by RFC 1315 (FR DTE MIB)
+--        or specific to Cisco products.
+--
+-- January 1996, Chifei Cheng
+--
+-- Copyright (c) 1996, 1999, 2000, 2001 by cisco Systems, Inc.
+-- All rights reserved.
+--
+--------------------------------------------------------------------
+
+-- Note:
+-- Until future change, it is no intention for this MIB to cover 
+-- every Frame Relay related feature, configuration statement, or
+-- exec command display. The focus is to provide key information
+-- that are unavailable in any of the existing MIB's, but are
+-- currently available through the Frame Relay show commands and/or
+-- configuration displays.
+
+
+CISCO-FRAME-RELAY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY,
+        OBJECT-TYPE,
+        Counter32,
+        Integer32,
+        IpAddress
+                FROM SNMPv2-SMI
+        MODULE-COMPLIANCE,
+        OBJECT-GROUP
+                FROM SNMPv2-CONF
+        TEXTUAL-CONVENTION,
+        DisplayString,
+        TruthValue
+                FROM SNMPv2-TC
+        ciscoMgmt
+                FROM CISCO-SMI
+        InterfaceIndex
+                FROM IF-MIB
+        ifIndex
+               FROM RFC1213-MIB
+        frDlcmiEntry,
+        frCircuitEntry,
+        frCircuitIfIndex,
+        frCircuitDlci
+                FROM RFC1315-MIB;
+
+-- All table indicies in this MIB that involve interface index and
+-- DLCI are derived from frCircuitIfIndex and frCircuitDlci 
+-- respectively from RFC 1315.
+
+ciscoFrameRelayMIB     MODULE-IDENTITY
+        LAST-UPDATED   "200010130000Z"
+        ORGANIZATION   "Cisco Systems, Inc."
+        CONTACT-INFO
+                "       Cisco Systems
+                        Customer Service
+
+                Postal: 170 W Tasman Drive
+                        San Jose, CA  95134
+                        USA
+
+                   Tel: +1 800 553-NETS
+
+                E-mail: cs-framerelay@cisco.com"
+        DESCRIPTION
+                "Cisco Frame Relay MIB"
+
+        REVISION        "200010130000Z"
+        DESCRIPTION
+                "(1) Added objects of FR Switching, FR Fragmentation 
+                and FR/ATM Interworking.
+                (2) Objects for per PVC I/O rate is added to 
+                cfrExtCircuitTable"
+
+        REVISION        "200005220000Z"
+        DESCRIPTION
+                "(1) Added  ELMI subgroup for ELMI objects."
+
+        REVISION        "200005160000Z"
+        DESCRIPTION
+                "(1) Added Traffic Shaping parameter objects to
+                cfrExtCircuitTable.
+                (2) Deprecated cfrSvcMinThruputOut and 
+                cfrSvcMinThruputIn. Added cfrExtCircuitMinThruputOut 
+                and cfrExtCircuitMinThruputIn in cfrExtCircuitTable 
+                inorder to make them applicable to both PVC/SVC. 
+                (3) Added cfrExtCircuitBandwidth object to 
+                cfrExtCircuitTable."
+
+        REVISION        "200004260000Z"
+        DESCRIPTION
+                "(1) add an integer value for cfrMapPayloadCompressType;
+                (2) reword the Description statements for 
+                      { cfrMapPayloadCompressType,
+                      cfrExtCircuitUncompressIns,
+                      cfrExtCircuitUncompressOuts }
+                so that they are not limited to software compression."
+
+        REVISION        "9908210000Z"
+        DESCRIPTION
+                "(1) Added cfrExtCircuitUncompressOuts and
+                cfrExtCircuitUncompressIns to the circuit subgroup;
+                (2) Added cfrMapRtpHdrCompress and cfrMapPayloadCompressType
+                to the mapping subgroup;
+                (3) cfrMapPayloadCompress becomes deprecated, obsoleted
+                by cfrMapPayloadCompressType;
+                (4) frCircuitSentOctets and frCircuitReceivedOctets
+                per RFC1315 will reflect the number of bytes in Frame Relay
+                frames sent to and received from the physical layer. Same
+                effect is applied to ifOutOctets and ifInOctets as well
+                when ifIndex refers to a Frame Relay subinterface."
+
+        REVISION        "9608150000Z"
+        DESCRIPTION
+                "Initial version of this MIB module."
+
+        ::= { ciscoMgmt 49 }
+
+
+ciscoFrMIBObjects OBJECT IDENTIFIER ::= { ciscoFrameRelayMIB 1 }
+
+-- Subgroups:
+-- The objects include four subgroups on the topics of
+--        o LMI (Local Management Interface, see ANSI T1.617 Annex D and
+--          the Frame Relay Specification with Extensions by DEC,
+--          NT, StrataCom, and Cisco.),
+--        o Virtual circuits,
+--        o Circuit mapping information, 
+--        o SVC (switched virtual circuits, see CCITT/ITU Q.933 and 
+--           Q.922.),
+--        o ELMI (Enhanced Link Management Interface) objects,
+--        o Fragmentation objects,
+--        o Frame Relay/ATM Network Interworking objects,
+--        o Frame Relay/ATM PVC Service Interworking objects, and
+--        o Frame Relay Switching objects.
+
+cfrLmiObjs        OBJECT IDENTIFIER ::= { ciscoFrMIBObjects 1 }
+
+cfrCircuitObjs    OBJECT IDENTIFIER ::= { ciscoFrMIBObjects 2 }
+
+cfrMapObjs        OBJECT IDENTIFIER ::= { ciscoFrMIBObjects 3 }
+
+cfrSvcObjs        OBJECT IDENTIFIER ::= { ciscoFrMIBObjects 4 }
+
+cfrElmiObjs       OBJECT IDENTIFIER ::= { ciscoFrMIBObjects 5 }
+
+cfrFragObjs       OBJECT IDENTIFIER ::= { ciscoFrMIBObjects 6 }
+
+cfrConnectionObjs  OBJECT IDENTIFIER ::= { ciscoFrMIBObjects 7 }
+
+DlciNumber ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+                "Numerical format of Data Link Connection Identifier
+                (DLCI) in decimal, identical to the 'DLCI' as INTEGER
+                of 0..DLCINumber in RFC1315. The maximum value depends
+                on Frame Relay implementation, which is currently set
+                to be 1023 for 2-octet address format per UNI
+                Implementation Agreement FRF.1."
+        SYNTAX        INTEGER (0..1023)
+
+CfrMapProtocols ::= TEXTUAL-CONVENTION
+        STATUS  current
+        DESCRIPTION
+                "Cisco link types (network protocols) that run
+                over Frame Relay. Associated values, except for
+                wildcard, match assigned values of internal software
+                respectively."
+        SYNTAX  INTEGER
+        {
+                arp(1),
+                serialArp(6),
+                ip(7),
+                xns(10),
+                novell(11),
+                apollo(12),
+                vines(13),
+                appletalk(16),
+                ieeeSpanning(18),
+                decnet(22),
+                clns(25),
+                rsrb(37),
+                bridge(38),
+                stun(39),
+                frArp(40),
+                uncompressedTcp(47),
+                compressedTcp(48),
+                llc2(49),
+                frSwitch(53),
+                dlsw(63),
+                nhrp(74),
+                compressedRtp(83),
+                wildcard(999)        -- either means no applicable type for
+                                -- the circuit or means point-to-point
+        }
+
+
+-- LMI sub-group {
+
+cfrLmiTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CfrLmiEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Table of Frame Relay LMI information that are
+                either supplemental to the frDlcmiTable of RFC 1315
+                or specific to Cisco's implementation."
+        REFERENCE
+                "American National Standard T1.617-1991, Annex D"
+        ::= { cfrLmiObjs 1 }
+
+cfrLmiEntry OBJECT-TYPE
+        SYNTAX      CfrLmiEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Each entry of the table contains information
+                of Frame Relay LMI over one physical interface.
+                They are mostly FR generic and some Cisco specific."
+        AUGMENTS { frDlcmiEntry }
+        ::= { cfrLmiTable 1 }
+
+CfrLmiEntry ::=
+        SEQUENCE {
+            cfrLmiLinkstatus             INTEGER,
+            cfrLmiLinkType               INTEGER,
+            cfrLmiEnquiryIns             Counter32,
+            cfrLmiEnquiryOuts            Counter32,
+            cfrLmiStatusIns              Counter32,
+            cfrLmiStatusOuts             Counter32,
+            cfrLmiUpdateStatusIns        Counter32,
+            cfrLmiUpdateStatusOuts       Counter32,
+            cfrLmiStatusTimeouts         Counter32,
+            cfrLmiStatusEnqTimeouts      Counter32,
+            cfrLmiN392Dce                INTEGER,
+            cfrLmiN393Dce                INTEGER,
+            cfrLmiT392Dce                INTEGER
+        }
+
+-- Note: for LMI type, i.e. ANSI or Cisco, see frDlcmiState
+-- of RFC 1315. Also, for LMI parameters for DTE not listed here,
+-- e.g. T391, N391, N392, and N393, see RFC 1315.
+--
+-- Although based on the current logic the value for
+-- cfrLmiDLstatus is equivalent to ifOperStatus, the object
+-- remains herein for future possible development change.
+
+cfrLmiLinkstatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    up(1),
+                    down(2)
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Data link status via LMI."
+        ::= { cfrLmiEntry 1 }
+
+cfrLmiLinkType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                    dte(1),
+                    dce(2),
+                    nni(3)
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Frame Relay link type."
+        ::= { cfrLmiEntry 2 }
+
+
+cfrLmiEnquiryIns OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "messages"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of Status Enquiry messages received."
+        ::= { cfrLmiEntry 3 }
+
+cfrLmiEnquiryOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "messages"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of Status Enquiry messages sent."
+        ::= { cfrLmiEntry 4 }
+
+cfrLmiStatusIns OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "messages"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of Status messages received."
+        ::= { cfrLmiEntry 5 }
+
+cfrLmiStatusOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "messages"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of Status messages sent."
+        ::= { cfrLmiEntry 6 }
+
+cfrLmiUpdateStatusIns OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "messages"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of Update Status messages received."
+        ::= { cfrLmiEntry 7 }
+
+cfrLmiUpdateStatusOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "messages"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of Update Status messages sent"
+        ::= { cfrLmiEntry 8 }
+
+cfrLmiStatusTimeouts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "times"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of times when timeout occurred on waiting
+                for Status message"
+        ::= { cfrLmiEntry 9 }
+
+cfrLmiStatusEnqTimeouts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "times"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of times when timeout occurred on waiting
+                for Status Enquiry message"
+        ::= { cfrLmiEntry 10 }
+
+cfrLmiN392Dce OBJECT-TYPE
+        SYNTAX      INTEGER (0..10)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "LMI error threshold for DCE interface.
+                For DTE, value becomes 0."
+        ::= { cfrLmiEntry 11 }
+
+cfrLmiN393Dce OBJECT-TYPE
+        SYNTAX      INTEGER (0..10)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "LMI monitored event count for DCE interface.
+                For DTE, value becomes zero (0)."
+        ::= { cfrLmiEntry 12 }
+
+cfrLmiT392Dce OBJECT-TYPE
+        SYNTAX      INTEGER (0..30)
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "DCE polling verification timer for DCE interface
+                For DTE, the value becomes zero (0)."
+        ::= { cfrLmiEntry 13 }
+
+-- end LMI subgroup }
+
+-- Circut sub-group {
+
+cfrCircuitTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CfrCircuitEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Table of descriptive and statistics information
+                that are generic to Frame Relay virtual circuits."
+        ::= { cfrCircuitObjs 1 }
+
+cfrCircuitEntry OBJECT-TYPE
+        SYNTAX      CfrCircuitEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Each entry of the table contains information of a
+                circuit that are not included in frCircuitTable of
+                RFC1315 but are generic to Frame Relay."
+        AUGMENTS { frCircuitEntry }
+                -- indexed by { frCircuitIfIndex, frCircuitDlci }
+        ::= { cfrCircuitTable 1 }
+
+CfrCircuitEntry ::=
+        SEQUENCE {
+            cfrCircuitDEins              Counter32,
+            cfrCircuitDEouts             Counter32,
+            cfrCircuitDropPktsOuts       Counter32,
+            cfrCircuitType               INTEGER
+        }
+
+cfrCircuitDEins OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of packets received with the Discarded
+                Eligibility indictor (the DE bit) set."
+        ::= { cfrCircuitEntry 1 }
+
+cfrCircuitDEouts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of packets transmitted with DE bit set."
+        ::= { cfrCircuitEntry 2 }
+
+cfrCircuitDropPktsOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of discarded packets that were to be sent."
+        ::= { cfrCircuitEntry 3 }
+
+cfrCircuitType OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    pvc(1),        -- permanent virtual circuit
+                    svc(2)        -- switched virtual circuit
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Basic circuit type"
+        ::= { cfrCircuitEntry 4 }
+
+-- Cisco specific circuit information:
+
+cfrExtCircuitTable  OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CfrExtCircuitEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Table of Cisco implementation specific FR
+                circuit information. This is a Cisco extension
+                for the frCircuitTable of RFC 1315."
+        ::= { cfrCircuitObjs 2 }
+
+cfrExtCircuitEntry  OBJECT-TYPE
+        SYNTAX      CfrExtCircuitEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Each entry of the table contains information
+                of a Frame Relay virtual circuit that are specific
+                to Cisco implementation."
+        AUGMENTS { frCircuitEntry }
+                -- indexed by { frCircuitIfIndex, frCircuitDlci }
+        ::= { cfrExtCircuitTable 1 }
+
+CfrExtCircuitEntry ::=
+        SEQUENCE {
+            cfrExtCircuitIfName             DisplayString,
+            cfrExtCircuitIfType             INTEGER,
+            cfrExtCircuitSubifIndex         InterfaceIndex,
+            cfrExtCircuitMapStatus          INTEGER,
+            cfrExtCircuitCreateType         INTEGER,
+            cfrExtCircuitMulticast          TruthValue,
+            cfrExtCircuitRoutedDlci         DlciNumber,
+            cfrExtCircuitRoutedIf           InterfaceIndex,
+            cfrExtCircuitUncompressIns      Counter32,
+            cfrExtCircuitUncompressOuts     Counter32,
+            cfrExtCircuitFECNOuts           Counter32,
+            cfrExtCircuitBECNOuts           Counter32,
+            cfrExtCircuitMinThruputOut      Integer32,
+            cfrExtCircuitMinThruputIn       Integer32,
+            cfrExtCircuitBcastPktOuts       Counter32,
+            cfrExtCircuitBcastByteOuts      Counter32,
+            cfrExtCircuitBandwidth          Integer32,
+            cfrExtCircuitShapeByteLimit     Integer32,
+            cfrExtCircuitShapeInterval      Integer32,
+            cfrExtCircuitShapeByteIncrement Integer32,
+            cfrExtCircuitShapePkts          Counter32,
+            cfrExtCircuitShapeBytes         Counter32,
+            cfrExtCircuitShapePktsDelay     Counter32,
+            cfrExtCircuitShapeBytesDelay    Counter32,
+            cfrExtCircuitShapeActive        TruthValue,
+            cfrExtCircuitShapeAdapting      INTEGER,
+            cfrExtCircuitTxDataRate         INTEGER,
+            cfrExtCircuitTxPktRate          INTEGER,
+            cfrExtCircuitRcvDataRate        INTEGER,
+            cfrExtCircuitRcvPktRate         INTEGER
+        }
+
+cfrExtCircuitIfName  OBJECT-TYPE
+        SYNTAX       DisplayString
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+                "The textual name of the main interface or the 
+                subinterface that this DLCI is associated with.
+                This is the same name string of an interface used
+                in the configuration and all console displays,
+                such as 'serial 0', 'serial 3/0.3', etc."
+        ::= { cfrExtCircuitEntry 1 }
+
+cfrExtCircuitIfType  OBJECT-TYPE
+        SYNTAX  INTEGER {
+                  mainInterface(1),
+                  pointToPoint(2),        -- subinterface
+                  multipoint(3)           -- subinterface
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Type of the subinterface this DLCI is associated
+                with, if configured."
+        ::= { cfrExtCircuitEntry 2 }
+
+cfrExtCircuitSubifIndex OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "For value greater than zero (0), it indicates
+                the network management interface index
+                for the subinterface associated with
+                this DLCI. Value 0 means the DLCI is not
+                associated with any subinterface." 
+        ::= { cfrExtCircuitEntry 3 }
+
+cfrExtCircuitMapStatus OBJECT-TYPE
+        SYNTAX      INTEGER (0..2047)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The mapping protocols (internally considered as
+                the 'link type') applied on this circuit.
+                The value ranges from 0 to 2047.
+                For point-to-point DLCI, the value stays zero.
+                Otherwise, the value is a sum. It initially takes
+                the value zero, then, for each type of Protocol,
+                2 raised to a power is added to the sum.
+                The following table presents respective power and
+                equivalent value for each applicable type:
+
+                        Protocol        Power    Value
+                        --------        -----    -----
+                        IP              0        1
+                        IPX             1        2
+                        Appletalk       2        4
+                        XNS             3        8
+                        VINES           4        16
+                        DECnet          5        32
+                        CLNS            6        64
+                        Bridging        7        128
+                        RSRB            8        256
+                        STUN            9        512
+                        LLC2            10       1024
+
+                For example, value 3 means the circuit's mapping
+                protocols include IP and IPX. (3 = 2**1 + 2**0,
+                where 0 corresponds to IP and 1 to IPX.) Value 0
+                means there is currently no mapping protocol for
+                the circuit.
+                See cfrMapTable for more mapping information."
+        ::= { cfrExtCircuitEntry 4 }
+
+cfrExtCircuitCreateType OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    dynamic(1),      -- PVC established through LMI
+                                     -- or an SVC established through
+                                     -- SVC signalling
+                    static(2)        -- circuit was configured
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Identify the last source of the circuit's creation."
+        ::= { cfrExtCircuitEntry 5 }
+
+cfrExtCircuitMulticast  OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Indicate if this DLCI is a multicast DLCI."
+        ::= { cfrExtCircuitEntry 6 }
+
+cfrExtCircuitRoutedDlci OBJECT-TYPE
+        SYNTAX      DlciNumber
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The routed DLCI to pair up with this DLCI
+                for switching function. NOTE: Value zero (0)
+                indicates that there is no such routed DLCI
+                corresponding to this DLCI."
+        ::= { cfrExtCircuitEntry 7 }
+
+cfrExtCircuitRoutedIf OBJECT-TYPE
+        SYNTAX      InterfaceIndex
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The interface for the routed DLCI that pairs up
+                with this DLCI for switching. Value greater than 0
+                is the InterfaceIndex for that interface. Value
+                zero (0) indicates that there is no such routed DLCI
+                corresponding to this DLCI."
+        ::= { cfrExtCircuitEntry 8 }
+
+cfrExtCircuitUncompressIns OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of inbound octets of the data packets,
+                accounted at Frame Relay level after FRF.9
+                payload decompression is applied. In the case of
+                non-FRF.9, this value could be identical to
+                frCircuitReceivedOctets, unless otherwise noted."
+        ::= { cfrExtCircuitEntry 9 }
+
+cfrExtCircuitUncompressOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of outbound octets of the data packets,
+                accounted at Frame Relay level before FRF.9
+                payload compression is applied. In the case of
+                non-FRF.9, this value could be identical to
+                frCircuitSentOctets, unless otherwise noted."
+        ::= { cfrExtCircuitEntry 10 }
+
+cfrExtCircuitFECNOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of frames sent out to the network 
+                indicating forward congestion."
+        ::= { cfrExtCircuitEntry 11 }
+
+cfrExtCircuitBECNOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of frames sent out to the network 
+                indicating backward congestion."
+        ::= { cfrExtCircuitEntry 12 }
+
+cfrExtCircuitMinThruputOut OBJECT-TYPE
+        SYNTAX      Integer32 (9600..1544000)
+        UNITS       "bits per second"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Circuit's outgoing minimal Throughput based on 
+                configuration."
+        ::= { cfrExtCircuitEntry 13 }
+
+cfrExtCircuitMinThruputIn  OBJECT-TYPE
+        SYNTAX      Integer32 (9600..1544000)
+        UNITS       "bits per second"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Circuit's incoming minimal Throughput based on
+                configuration."
+        ::= { cfrExtCircuitEntry 14 }
+
+cfrExtCircuitBcastPktOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of broadcast packets sent out to the 
+                 network."
+        ::= { cfrExtCircuitEntry 15 }
+
+cfrExtCircuitBcastByteOuts OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes sent out to the network in 
+                broadcast packets."
+        ::= { cfrExtCircuitEntry 16 }
+
+cfrExtCircuitBandwidth OBJECT-TYPE
+        SYNTAX      Integer32 (0..16777215)
+        UNITS       "bits per second"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Bandwidth of the virtual circuit, acquired from 
+                Cisco typed LMI Full Status message."
+        ::= { cfrExtCircuitEntry 17 }
+
+cfrExtCircuitShapeByteLimit OBJECT-TYPE
+        SYNTAX      Integer32 (125..2147483647)
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Maximum number of tokens a token bucket can hold in any
+                time interval in case of traffic shaping."
+        ::= { cfrExtCircuitEntry 18 }
+
+cfrExtCircuitShapeInterval OBJECT-TYPE
+        SYNTAX      Integer32 (10..125)
+        UNITS       "milliseconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Committed rate measurement interval."
+        ::= { cfrExtCircuitEntry 19 }
+
+cfrExtCircuitShapeByteIncrement OBJECT-TYPE
+        SYNTAX      Integer32 (125..2147483647)
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of tokens added into the token bucket per time
+                interval in case of traffic shaping."
+        ::= { cfrExtCircuitEntry 20 }
+
+cfrExtCircuitShapePkts OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of packets that went through traffic 
+                shaping."
+        ::= { cfrExtCircuitEntry 21 }
+
+cfrExtCircuitShapeBytes OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes that went through traffic 
+                shaping."
+        ::= { cfrExtCircuitEntry 22 }
+
+cfrExtCircuitShapePktsDelay OBJECT-TYPE
+        SYNTAX      Counter32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of packets that were delayed by the 
+                traffic shaper."
+        ::= { cfrExtCircuitEntry 23 }
+
+cfrExtCircuitShapeBytesDelay OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes that were delayed by the 
+                traffic shaper."
+        ::= { cfrExtCircuitEntry 24 }
+
+cfrExtCircuitShapeActive OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Shows whether shaping is active or not."
+        ::= { cfrExtCircuitEntry 25 }
+
+cfrExtCircuitShapeAdapting  OBJECT-TYPE
+        SYNTAX  INTEGER {
+                  none(1),
+                  becn(2),
+                  foreSight(3)
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Type of Adaptive Shaping configured.
+                none(1)      - No adaptive shaping configured
+                becn(2)      - Backward Explicit Congestion Notification
+                foreSight(3) - ForeSight is the network traffic control 
+                               software used in Cisco WAN switches"
+        ::= { cfrExtCircuitEntry 26 }
+
+cfrExtCircuitTxDataRate OBJECT-TYPE
+        SYNTAX       INTEGER (1..45000000)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The average rate (bytes/second) at which data is 
+               transmitted in this circuit. "
+        ::= { cfrExtCircuitEntry 27 }
+
+cfrExtCircuitTxPktRate OBJECT-TYPE
+        SYNTAX       INTEGER (1..45000000)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+              "The average number of packets sent in a second in this 
+              circuit."
+        ::= { cfrExtCircuitEntry 28 }
+
+cfrExtCircuitRcvDataRate OBJECT-TYPE
+        SYNTAX       INTEGER (1..45000000)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The average rate (bytes/second) at which data is 
+               received in this circuit. "
+        ::= { cfrExtCircuitEntry 29 }
+
+cfrExtCircuitRcvPktRate OBJECT-TYPE
+        SYNTAX       INTEGER (1..45000000)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The average number of packets received in a second in 
+               this circuit. "
+       ::= { cfrExtCircuitEntry 30 }
+
+-- end circuit subgroup }
+
+-- Mapping sub-group {
+
+cfrMapTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CfrMapEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Table of protocols and addresses mapping
+                information of FR virtual circuit."
+        ::= { cfrMapObjs 1 }
+
+cfrMapEntry OBJECT-TYPE
+        SYNTAX      CfrMapEntry
+        MAX-ACCESS  not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Each entry of the table contains one mapping 
+                information of a Frame Relay virtual circuit."
+        INDEX { frCircuitIfIndex, frCircuitDlci, cfrMapIndex } 
+        ::= { cfrMapTable 1 }
+
+CfrMapEntry ::=
+        SEQUENCE {
+            cfrMapIndex                 INTEGER,
+            cfrMapProtocol              CfrMapProtocols,
+            cfrMapAddress               OCTET STRING (SIZE(0..64)),
+            cfrMapType                  INTEGER,
+            cfrMapEncaps                INTEGER,
+            cfrMapBroadcast             TruthValue,
+            cfrMapPayloadCompress       TruthValue,
+            cfrMapTcpHdrCompress        INTEGER,
+            cfrMapRtpHdrCompress        INTEGER,
+            cfrMapPayloadCompressType   INTEGER
+        }
+
+cfrMapIndex OBJECT-TYPE
+        SYNTAX      INTEGER (1..999)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "An arbitrary Index to the mapping information
+                associated with a certain circuit. The maximum
+                value is arbitrarily picked which is considered
+                sufficient for usual configuration."
+        ::= { cfrMapEntry 1 }
+
+cfrMapProtocol OBJECT-TYPE
+        SYNTAX      CfrMapProtocols
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Mapping protocol for this circuit."
+        ::= { cfrMapEntry 2 }
+
+cfrMapAddress OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(0..64))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Mapping protocol address at remote end for
+                this DLCI.
+                NOTE: For point-to-point DLCI, the string is fixed
+                to be point-to-point."
+        ::= { cfrMapEntry 3 }
+
+cfrMapType OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    static(1),
+                    dynamic(2),
+                    svc(3)
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Type for the map creation."
+        ::= { cfrMapEntry 4 }
+
+cfrMapEncaps OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    ietf(1),    -- following IETF specifications
+                                -- (RFC 1490 as up to date)
+                    cisco(2)
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Indication of the encapsulation type for this
+                mapping protocol."
+        ::= { cfrMapEntry 5 }
+
+cfrMapBroadcast OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Broadcast enabled or disabled."
+        ::= { cfrMapEntry 6 }
+
+cfrMapPayloadCompress OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-only
+        STATUS      deprecated
+                    -- obsoleted by cfrMapPayloadCompressType
+        DESCRIPTION
+                "Indicate if payload compression is enabled."
+        ::= { cfrMapEntry 7 }
+
+cfrMapTcpHdrCompress OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    inapplicable(1),
+                    passive(2),
+                    active(3)
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "TCP header compression type, if applicable."
+        ::= { cfrMapEntry 8 }
+
+cfrMapRtpHdrCompress OBJECT-TYPE
+        SYNTAX  INTEGER
+                {
+                    inapplicable(1),
+                    passive(2),
+                    active(3)
+                }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "RTP header compression type, if applicable.
+                The value 'passive' means that the header of an
+                outgoing RTP/IP packet is compressed only if an
+                incoming RTP/IP packet had a compressed header.
+                The value 'active' means the header of every outgoing
+                RTP/IP packet is compressed."
+        ::= { cfrMapEntry 9 }
+
+cfrMapPayloadCompressType OBJECT-TYPE
+        SYNTAX  INTEGER
+             {
+                inapplicable(1),
+                cisco(2),         -- Cisco proprietary FR packet-
+                                  -- by-packet payload compression
+                frf9Software(3),  -- FRF.9 software payload compression
+                frf9Hardware(4)   -- FRF.9 hardware payload compression
+             }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "FR payload compression type, if applicable.
+                FRF.9 is the Frame Relay Forum Implementation Agreement
+                on FR payload compression. The compression can be done
+                by either software or hardware (when equipped with the
+                supporting hardware), depending on configuration."
+        REFERENCE
+                "Frame Relay Forum document number FRF.9"
+        ::= { cfrMapEntry 10 }
+
+-- end mapping subgroup }
+
+-- SVC sub-group {
+--        containing SVC spcific information
+
+cfrSvcTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CfrSvcEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Table of FR SVC specific, descriptive
+                and statistics information."
+        ::= { cfrSvcObjs 1 }
+
+cfrSvcEntry OBJECT-TYPE
+        SYNTAX      CfrSvcEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Each entry of the table contains circuit information
+                specific to a Frame Relay Switched Virtual Circuit."
+        INDEX { frCircuitIfIndex, frCircuitDlci } 
+        ::= { cfrSvcTable 1 }
+
+CfrSvcEntry ::=
+        SEQUENCE {
+            cfrSvcAddrLocal           OCTET STRING (SIZE(0..64)),
+            cfrSvcAddrRemote          OCTET STRING (SIZE(0..64)),
+            cfrSvcThroughputIn        Integer32,
+            cfrSvcMinThruputOut       Integer32,
+            cfrSvcMinThruputIn        Integer32,
+            cfrSvcCommitBurstIn       Integer32,
+            cfrSvcExcessBurstIn       Integer32,
+            cfrSvcIdleTime            Integer32
+        }
+
+-- For circuit (DLCI) outbound throughput and outbound Committed 
+-- and Excess Burst size, please refer to the following from
+-- RFC1315 respectively:
+--        frCircuitThroughput, 
+--        frCircuitCommittedBurst, and
+--        frCircuitExcessBurst
+
+
+cfrSvcAddrLocal OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(0..64))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Local E.164/X.125 address for the circuit."
+        ::= { cfrSvcEntry 1 }
+
+cfrSvcAddrRemote OBJECT-TYPE
+        SYNTAX      OCTET STRING (SIZE(0..64))
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Remote E.164/X.125 address for the circuit."
+        ::= { cfrSvcEntry 2 }
+
+cfrSvcThroughputIn OBJECT-TYPE
+        SYNTAX      Integer32 (9600..1544000)
+        UNITS       "bits per second"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Circuit's incoming throughput. For outgoing 
+                throughput (commonly referred to as CIR) see
+                frCircuitThroughput per RFC1315."
+        ::= { cfrSvcEntry 3 }
+
+cfrSvcMinThruputOut OBJECT-TYPE
+        SYNTAX      Integer32 (9600..1544000)
+        UNITS       "bits per second"
+        MAX-ACCESS  read-only
+        STATUS      deprecated -- deprecated by 
+                               -- cfrExtCircuitMinThruputOut
+        DESCRIPTION
+                "Circuit's outgoing minimal Throughput."
+        ::= { cfrSvcEntry 4 }
+
+cfrSvcMinThruputIn  OBJECT-TYPE
+        SYNTAX      Integer32 (9600..1544000)
+        UNITS       "bits per second"
+        MAX-ACCESS  read-only
+        STATUS      deprecated -- deprecated by 
+                               -- cfrExtCircuitMinThruputIn
+        DESCRIPTION
+                "Circuit's incoming minimal Throughput."
+        ::= { cfrSvcEntry 5 }
+
+cfrSvcCommitBurstIn OBJECT-TYPE
+        SYNTAX      Integer32 (9600..1544000)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Circuit's incoming Committed Burst Rate.
+                See ANSI and/or ITU specifications for
+                definition and calculations. For outgoing
+                CBR, see frCircuitCommittedBurst per RFC 1315."
+        ::= { cfrSvcEntry 6 }
+
+cfrSvcExcessBurstIn OBJECT-TYPE
+        SYNTAX      Integer32 (9600..2440000)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Circuit's incoming Excess Burst Rate.
+                See ANSI and/or ITU specifications for
+                definition and calculations. For outgoing
+                EBR, see frCircuitExcessBurst per RFC 1315."
+        ::= { cfrSvcEntry 7 }
+
+cfrSvcIdleTime      OBJECT-TYPE
+        SYNTAX      Integer32
+        UNITS       "seconds"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Circuit's idle time period. If expires, the
+                circuit is cleared."
+        ::= { cfrSvcEntry 8 }
+
+-- end SVC subgroup }
+
+-- Enhanced Link Management Interface(ELMI) sub-group {
+-- ELMI is the protocol that learns QOS parameters(CIR,Bc,Be etc)
+-- of a VC from the switch.
+-- This sub group contains ELMI specific information.
+
+cfrElmiIpAddr      OBJECT-TYPE
+        SYNTAX     IpAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object represents the Management address of the
+                 device used for address registration. 
+                 Network management station can send management
+                 messages to this IP address. This can be 
+                 user configured address or the address of one of the
+                 interfaces on the device. If address registration is
+                 disabled then this will have a value of 0.0.0.0. 
+                 This object is accessible only if the ELMI protocol 
+                 is supported on the device"
+        ::= { cfrElmiObjs 1 }
+
+cfrElmiTable       OBJECT-TYPE
+        SYNTAX     SEQUENCE OF CfrElmiEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Table of CISCO Frame Relay ELMI information that is
+                 specific to CISCO implementation"
+        ::= { cfrElmiObjs 2 }
+
+cfrElmiEntry       OBJECT-TYPE
+        SYNTAX     CfrElmiEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Each entry of the table contains information about a
+                 physical interface. The table can be accessible only
+                 if the device supports ELMI protocol and if LMI is
+                 enabled on the interface."
+        INDEX { ifIndex }
+        ::= { cfrElmiTable 1 }
+  
+CfrElmiEntry ::=
+        SEQUENCE {
+            cfrElmiLinkStatus
+                INTEGER,
+            cfrElmiArStatus
+                INTEGER,
+            cfrElmiRemoteStatus
+                INTEGER
+        }
+
+cfrElmiLinkStatus  OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       enabled(1),
+                       disabled(2)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This variable states whether Enhanced Link Management
+                 Interface(ELMI) protocol is enabled or not on a 
+                 frame relay interface."
+        ::= { cfrElmiEntry 1 }
+
+cfrElmiArStatus    OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       enabled(1),
+                       disabled(2)
+                   }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This variable states whether the Enhanced Link
+                 Management Interface(ELMI) address registration(AR)
+                 mechanism is enabled or not on a frame relay 
+                 interface. A value of 1 indicates ELMI AR is 
+                 supported on the interface. A value of 2 indicates
+                 ELMI AR is supported but the user disabled the
+                 exchange of IP address and ifIndex with the
+                 neighboring device. This object doesn't have any
+                 significance if cfrElmiLinkStatus is disabled
+                 on the interface."
+        ::= { cfrElmiEntry 2 }
+
+cfrElmiRemoteStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                        enabled(1),
+                        disabled(2)
+                    }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "This variable states the Enhanced Link 
+                 Management(ELMI) status on the other end of the
+                 interface. If cfrElmiLinkStatus is enabled on the
+                 other end a value of 1 will be returned,
+                 else 2 will be returned. This object doesn't have any
+                 significance if cfrElmiLinkStatus is disabled on the
+                 interface"
+        ::= { cfrElmiEntry 3 }
+
+cfrElmiNeighborTable    OBJECT-TYPE
+        SYNTAX          SEQUENCE OF CfrElmiNeighborEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "Table of CISCO Frame Relay Neighbor ELMI information
+                 that is specific to CISCO implementation."
+        ::= { cfrElmiObjs 3 }
+
+cfrElmiNeighborEntry OBJECT-TYPE
+        SYNTAX       CfrElmiNeighborEntry
+        MAX-ACCESS   not-accessible
+        STATUS       current
+        DESCRIPTION
+                "Each entry of the table contains information of the
+                 neighboring device connected to a physical interface.
+                 The entry will be present only if ELMI is enabled on
+                 the neighboring device interface. If the value of the
+                 cfrElmiRemoteStatus in the cfrElmiEntry is 1 then a 
+                 valid entry exists for the interface. If ELMI is not 
+                 supported on the remote end then, the neighbor 
+                 information for the interface will not be present"
+        INDEX { ifIndex }
+        ::= { cfrElmiNeighborTable 1 }
+
+CfrElmiNeighborEntry ::=
+        SEQUENCE {
+            cfrElmiNeighborArStatus
+                INTEGER,
+            cfrElmiNeighborIpAddress
+                IpAddress,
+            cfrElmiNeighborIfIndex
+                InterfaceIndex,
+            cfrElmiNeighborVendorName
+                DisplayString,
+            cfrElmiNeighborPlatformName
+                DisplayString,
+            cfrElmiNeighborDeviceName
+                DisplayString
+        }
+
+
+cfrElmiNeighborArStatus OBJECT-TYPE
+        SYNTAX          INTEGER {
+                            notsupported(1),
+                            enabled(2),
+                            disabled(3)
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This variable indicates the status of ELMI Address 
+                 registration(AR) on the neighboring device. A value 
+                 of 1 indicates ELMI AR is not supported on the 
+                 neighboring device. A value of 2 indicates ELMI AR is
+                 enabled on the interface. A value of 3 indicates AR is
+                 supported, but user disabled the exchange of IP 
+                 address and ifIndex with the neighbor."
+        ::= { cfrElmiNeighborEntry 1 }
+
+cfrElmiNeighborIpAddress OBJECT-TYPE
+        SYNTAX           IpAddress
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+                "The Management IP address of the neighboring device 
+                 to which the other end of this interface is 
+                 connected. Network management system can use this
+                 address to send management messages to the device.
+                 If address registration is not supported on the
+                 remote end then the value will be 0.0.0.0.
+                 NMS uses this object in the topology discovery of the
+                 network."
+        ::= { cfrElmiNeighborEntry 2 }
+
+cfrElmiNeighborIfIndex   OBJECT-TYPE
+        SYNTAX           InterfaceIndex
+        MAX-ACCESS       read-only
+        STATUS           current
+        DESCRIPTION
+                "The Interface index of the neighboring device to 
+                 which this interface is connected. If the value of
+                 cfrElmiNeighborArStatus is 2 then this will have a
+                 valid value. If the value of cfrElmiNeighborArStatus
+                 is 3 or 1 then value of this object will be 0. NMS
+                 uses this object in the topology discovery of the
+                 network."
+        ::= { cfrElmiNeighborEntry 3 }
+
+cfrElmiNeighborVendorName OBJECT-TYPE
+        SYNTAX            DisplayString
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+                "Vendor name of the neighboring device to which the
+                 other end of this interface is connected."
+        ::= { cfrElmiNeighborEntry 4 }
+
+cfrElmiNeighborPlatformName OBJECT-TYPE
+        SYNTAX              DisplayString
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+                "Platform name of the neighboring device to which the
+                 other end of this interface is connected."
+        ::= { cfrElmiNeighborEntry 5 }
+
+cfrElmiNeighborDeviceName   OBJECT-TYPE
+        SYNTAX              DisplayString
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+                "Device name of the neighboring device to which the
+                 other end of this interface is connected."
+        ::= { cfrElmiNeighborEntry 6 }
+
+-- end ELMI sub-group }
+
+-- Fragmentation sub-group {
+
+cfrFragTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CfrFragEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Table of Frame Relay Fragmentation information. 
+                These are specific to Cisco's implementation."
+        ::= { cfrFragObjs 1 }
+
+cfrFragEntry OBJECT-TYPE
+        SYNTAX      CfrFragEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Each entry of the table contains details of 
+                fragmentation configured on  this circuit. "
+        INDEX { frCircuitIfIndex, frCircuitDlci}
+        ::= { cfrFragTable 1 }
+
+CfrFragEntry ::=
+        SEQUENCE {
+            cfrFragSize                       INTEGER,
+            cfrFragType                       DisplayString,
+            cfrFragInPkts                     Counter32,
+            cfrFragOutPkts                    Counter32,
+            cfrFragInOctets                   Counter32,
+            cfrFragOutOctets                  Counter32,
+            cfrFragNotInPkts                  Counter32,
+            cfrFragNotOutPkts                 Counter32,
+            cfrFragNotInOctets                Counter32,
+            cfrFragNotOutOctets               Counter32,
+            cfrFragAssembledInPkts            Counter32,
+            cfrFragAssembledInOctets          Counter32,
+            cfrFragPreOutPkts                 Counter32,
+            cfrFragPreOutOctets               Counter32,
+            cfrFragDroppedReAssembledInPkts   Counter32,
+            cfrFragDroppedFragmentedOutPkts   Counter32,
+            cfrFragTimeoutsIn                 INTEGER,
+            cfrFragOutOfSeqFragPkts           Counter32,
+            cfrFragUnexpectedBBitSetPkts      Counter32,
+            cfrFragSeqMissedPkts              Counter32,
+            cfrFragInterleavedOutPkts         Counter32
+        }
+
+cfrFragSize OBJECT-TYPE
+        SYNTAX      INTEGER (16..1600)
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "cfrFragSize defines the payload size of a fragment 
+                and it excludes the FR headers and any FR fragmentation
+                header."
+
+        ::= { cfrFragEntry 1 }
+cfrFragType OBJECT-TYPE
+        SYNTAX  DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Fragmentation type configured by the user. The types
+                supported are end-to-end, VoFR-cisco and VoFR."
+        ::= { cfrFragEntry 2 }
+
+cfrFragInPkts  OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of frames received that have a 
+                fragmentation header."
+        ::= { cfrFragEntry 3 }
+
+cfrFragOutPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of fragments that are transmitted with a
+                fragmenation header."
+        ::= { cfrFragEntry 4 }
+
+cfrFragInOctets OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes received in frames that have a 
+                fragmentation header. The number of bytes include the
+                FR header." 
+        ::= { cfrFragEntry 5}
+
+cfrFragOutOctets OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes that are transmitted in frames
+                with a fragmenation header. The number of bytes also
+                includes the FR header." 
+        ::= { cfrFragEntry 6}
+
+cfrFragNotInPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of frames received that do not require 
+                reassembly and therefore will not contain the 
+                fragmentation header. This counter is valid only when
+                end-to-end fragmentation type is set." 
+        ::= { cfrFragEntry 7}
+
+cfrFragNotOutPkts  OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of frames transmitted without fragmenting
+                and therefore will not contain the fragmentation header.
+                This counter is valid only when end-to-end fragmentation
+                type is set." 
+        ::= { cfrFragEntry 8}
+
+cfrFragNotInOctets  OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes received in frames that do not 
+                require reassembly and therefore will not contain the 
+                fragmentation header. This counter is valid only when
+                end-to-end fragmentation type is set." 
+        ::= { cfrFragEntry 9}
+
+cfrFragNotOutOctets OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes transmitted in frames that are
+                not fragmented and therefore will not contain the 
+                fragmentation header. This counter is valid only when 
+                end-to-end fragmentation type is set." 
+        ::= { cfrFragEntry 10}
+
+cfrFragAssembledInPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of fully reassembled frames. It also 
+                counts the number of packets received without FR 
+                fragmentation header (i.e. in un-fragmentated pkts)."
+        ::= { cfrFragEntry 11}
+
+cfrFragAssembledInOctets OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes received in fully reassembled 
+                frames. It also counts the number of packets received
+                without FR fragmentation header (i.e.in un-fragmentated
+                pkts)."
+        ::= { cfrFragEntry 12}
+
+cfrFragPreOutPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of frames fragmented and trasmitted. It 
+                also counts the number of packets trasmitted without FR
+                fragmentation header (i.e. in un-fragmentated pkts)."
+        ::= { cfrFragEntry 13}
+
+cfrFragPreOutOctets OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "octets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Total number of bytes transmitted in fragmented frames.
+                It also counts the number of bytes trasmitted in frames
+                without FR fragmentation header (i.e. in un-fragmentated
+                pkts)."
+        ::= { cfrFragEntry 14}
+
+cfrFragDroppedReAssembledInPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of received fragments dropped for reasons such
+                as : running out of memory, receiving segments out of 
+                sequence, receiving an unexpected frame with a B bit 
+                set, timing out on a reassembling frame." 
+        ::= { cfrFragEntry 15}
+
+cfrFragDroppedFragmentedOutPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of fragments dropped because of running 
+                out of memory." 
+        ::= { cfrFragEntry 16}
+
+cfrFragTimeoutsIn OBJECT-TYPE
+        SYNTAX      INTEGER (0..1000)
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of reassemble timer timeouts for this circuit.
+                A frame requiring more than two minutes to fully 
+                reassemble is dropped and timeout will be incremented
+                by one." 
+        ::= { cfrFragEntry 17}
+
+cfrFragOutOfSeqFragPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Indicates the total number of packets received with an
+                unexpected sequence number. All fragments being 
+                reassembled are dropped. Start a new packet with the
+                received segment only if the B bit is set on the 
+                segment. Otherwise the new segment is also dropped." 
+        ::= { cfrFragEntry 18}
+
+cfrFragUnexpectedBBitSetPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of fragments received in this circuit with 
+                a B bit set. All fragments being reassembled are dropped
+                and a new packet is started with this segment." 
+        ::= { cfrFragEntry 19}
+
+cfrFragSeqMissedPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of fragments received in this circuit with 
+                skipped sequence number."
+        ::= { cfrFragEntry 20}
+
+cfrFragInterleavedOutPkts OBJECT-TYPE
+        SYNTAX      Counter32
+        UNITS       "packets"
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Number of packets that have been interleaved between 
+                segments." 
+        ::= { cfrFragEntry 21}
+
+-- end Fragmentation sub-group }
+
+
+-- Connect sub-group {
+
+cfrConnectionTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF CfrConnectionEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Table of Frame Relay/Frame Relay and Frame Relay/ATM
+                Network/Service Interworking connection information. 
+                These are specific to Cisco's implementation."
+        ::= { cfrConnectionObjs 1 }
+
+cfrConnectionEntry OBJECT-TYPE
+        SYNTAX      CfrConnectionEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+                "Each entry of the table contains information of a
+                connection that is established for Frame Relay/Frame 
+                Relay and Frame Relay/ATM Network/Service Interworking."
+        INDEX { frCircuitIfIndex, frCircuitDlci}
+        ::= { cfrConnectionTable 1 }
+
+CfrConnectionEntry ::=
+        SEQUENCE {
+            cfrConnName               DisplayString,
+            cfrConnID                 INTEGER,
+            cfrConnState              DisplayString,
+            cfrConnSegment1Name       DisplayString,
+            cfrConnSegment1VCGroup    DisplayString,
+            cfrConnSegment1Dlci       DlciNumber,
+            cfrConnSegment2Name       DisplayString, 
+            cfrConnSegment2Vpi        INTEGER,
+            cfrConnSegment2Vci        INTEGER,
+            cfrConnServiceTranslation INTEGER,
+            cfrConnFrSscsDlci         DlciNumber,
+            cfrConnEfciBit            INTEGER,
+            cfrConnDeBit              INTEGER,
+            cfrConnClpBit             INTEGER
+        }
+
+cfrConnName OBJECT-TYPE
+        SYNTAX       DisplayString
+        MAX-ACCESS   read-only
+        STATUS       current        
+        DESCRIPTION
+               "The textual name of a for FR/FR or FR/ATM  
+               Network/Service Interworking connection."
+        ::= { cfrConnectionEntry 1 }
+
+cfrConnID OBJECT-TYPE
+        SYNTAX       INTEGER (1..2000)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The numerical identifier of a FR/FR or FR/ATM  
+               Network/Service Interworking connection."
+        ::= { cfrConnectionEntry 2 }
+
+cfrConnState OBJECT-TYPE
+        SYNTAX      DisplayString
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "Status of a FR/FR or FR/ATM  Network/Service 
+                Interworking connection."
+        ::= { cfrConnectionEntry 3}
+
+cfrConnSegment1Name OBJECT-TYPE
+        SYNTAX       DisplayString
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The textual name used to identify the first segment of 
+               a FR/FR or FR/ATM  Network/Service Interworking 
+               connection."
+        ::= { cfrConnectionEntry 4}
+
+cfrConnSegment1VCGroup OBJECT-TYPE
+        SYNTAX       DisplayString
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The textual name used to identify the VC-Group in the
+               first segment of a Frame Relay/ATM  Network Interworking
+               (FRF.5)connection. 
+               This field is not applicabe in case of,
+                        FRF.8 (Frame Relay/ATM  Service Interworking)
+                        and
+                        FR-FR connectione. "
+       ::= { cfrConnectionEntry 5}
+
+cfrConnSegment1Dlci OBJECT-TYPE
+        SYNTAX       DlciNumber
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The DLCI used as the first segment of a FR-FR or FR-ATM
+               Network/Service Interworking connection."
+        ::= { cfrConnectionEntry 6}
+
+cfrConnSegment2Name OBJECT-TYPE
+        SYNTAX       DisplayString
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The interface on which second segment of a FR-FR or 
+               FR-ATM  Network/Service Interworking connection is 
+               configured."
+        ::= { cfrConnectionEntry 7}
+
+cfrConnSegment2Vpi OBJECT-TYPE
+        SYNTAX       INTEGER (0..4095)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The value of  VPI, in the ATM connection, used as the
+               second segment of a FR-ATM  Network/Service Interworking
+               connection. In case of FR-FR connection, the same will 
+               be used to display the DLCI used as the second segment."
+        ::= { cfrConnectionEntry 8}
+
+cfrConnSegment2Vci OBJECT-TYPE
+        SYNTAX       INTEGER (0..4095)
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The value of  VCI, in the ATM connection, used as the
+               second segment of a FR-ATM  Network/Service Interworking
+               connection. In case of FR-FR connection, this is not 
+               supported."
+       ::= { cfrConnectionEntry 9}
+
+cfrConnServiceTranslation OBJECT-TYPE
+        SYNTAX       INTEGER {
+                        serviceTranslationEnabled(1),
+                        serviceTranslationNotEnabled(2)
+                     }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "Shows whether Service Translation Mode is supported or
+               not. Translation Mode is the interworking of 
+               internetworking (routed and/or bridged) protocols used 
+               in FR-ATM  Service PVC Interworking(FRF.8).
+               This is not supported in case of FRF.5 (FR-ATM network
+               Interworking) and FR-FR connections."
+       ::= { cfrConnectionEntry 10}
+
+cfrConnFrSscsDlci OBJECT-TYPE
+        SYNTAX       DlciNumber
+        MAX-ACCESS   read-only
+        STATUS       current        
+        DESCRIPTION
+               "The DLCI value used at the FR-SSCS layer. This is one of
+               connection multiplexing methods used in Frame Relay/ATM  
+               Network Interworking.
+               Not supported in case of FRF.8 (FR-ATM Service PVC 
+               Interworking) and FR-FR connections"
+        ::= { cfrConnectionEntry 11}
+
+cfrConnEfciBit OBJECT-TYPE
+        SYNTAX       INTEGER  {
+                         mapFecn(1),
+                         notMapFecn(2)
+                     }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "Shows whether the FECN field in the FR frame is mapped 
+               to the ATM EFCI field of every cell generated out of the 
+               FR frame. This is used to indicate congestion in FR to
+               ATM direction in case of Frame Relay/ATM  Service PVC 
+               Interworking.
+               Not supported in FRF.5 (Frame Relay/ATM Network 
+               Interworking and FR-FR connections."
+::= { cfrConnectionEntry 12}
+
+cfrConnDeBit OBJECT-TYPE
+        SYNTAX       INTEGER {
+                         noMapClp(1),
+                         mapClp(2),
+                         setDe0(3),
+                         setDe1(4)
+                     }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The method of operation for loss priority mapping in the
+               B-ISDN to FR direction..
+               Not supported in case of FR-FR connection."
+        ::= { cfrConnectionEntry 13}
+
+cfrConnClpBit OBJECT-TYPE
+        SYNTAX  INTEGER {
+                  setClpTo0AndCopyDeToFrsscsDe(1),
+                  setClpTo1AndCopyDeToFrsscsDe(2),
+                  copyDeToFrsscsDeAndClp(3),
+                  copyDeToClp(4),
+                  setClp1(5),
+                  setClp0(6)
+                }
+        MAX-ACCESS   read-only
+        STATUS       current
+        DESCRIPTION
+               "The method of operation used to map loss priority
+               mapping in the FR to ATM direction.
+               Not supported in case of FR-FR connection."
+        ::= { cfrConnectionEntry 14}
+
+-- end Conn subgroup }
+
+ciscoFrMIBConformance OBJECT IDENTIFIER ::= { ciscoFrameRelayMIB 3 }
+ciscoFrMIBCompliances OBJECT IDENTIFIER ::= { ciscoFrMIBConformance 1 }
+ciscoFrMIBGroups      OBJECT IDENTIFIER ::= { ciscoFrMIBConformance 2 }
+
+ciscoFrMIBCompliance MODULE-COMPLIANCE
+        STATUS  obsolete  -- obsoleted by ciscoFrMIBCompliancesRev2
+        DESCRIPTION
+                "The compliance statement for entities which implement
+                this Cisco Frame Relay MIB."
+        MODULE  -- this module
+                MANDATORY-GROUPS { ciscoFrMIBGroup }
+        ::= { ciscoFrMIBCompliances 1 }
+
+ciscoFrMIBCompliancesRev1 MODULE-COMPLIANCE
+        STATUS  obsolete  -- obsoleted by ciscoFrMIBCompliancesRev2
+        DESCRIPTION
+                "The compliance statement for entities which implement
+                this Cisco Frame Relay MIB."
+        MODULE  -- this module
+                MANDATORY-GROUPS { ciscoFrMIBGroupRev1 }
+        ::= { ciscoFrMIBCompliances 2 }
+
+ciscoFrMIBCompliancesRev2 MODULE-COMPLIANCE
+        STATUS  obsolete  -- obsoleted by ciscoFrMIBCompliancesRev3 
+        DESCRIPTION
+                "The compliance statement for entities which implement
+                this Cisco Frame Relay MIB."
+        MODULE  -- this module
+                MANDATORY-GROUPS { ciscoFrLmiMIBGroup, 
+                                   ciscoFrCircuitMIBGroup,
+                                   ciscoExtCircuitMIBGroup,
+                                   ciscoFrTsMIBGroup,
+                                   ciscoFrMapMIBGroup,
+                                   ciscoFrSvcMIBGroup }
+        ::= { ciscoFrMIBCompliances 3 }
+
+ciscoFrMIBCompliancesRev3 MODULE-COMPLIANCE
+        STATUS  deprecated  -- deprecated by ciscoFrMIBCompliancesRev4
+        DESCRIPTION
+                "The compliance statement for entities which implement
+                this Cisco Frame Relay MIB."
+        MODULE  -- this module
+                MANDATORY-GROUPS { ciscoFrLmiMIBGroup,
+                                   ciscoFrCircuitMIBGroup,
+                                   ciscoExtCircuitMIBGroup,
+                                   ciscoFrTsMIBGroup,
+                                   ciscoFrMapMIBGroup,
+                                   ciscoFrSvcMIBGroup,
+                                   ciscoFrElmiMIBGroup}
+        ::= { ciscoFrMIBCompliances 4 }
+
+ciscoFrMIBCompliancesRev4 MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+                "The compliance statement for entities which implement
+                this Cisco Frame Relay MIB."
+        MODULE  -- this module
+                MANDATORY-GROUPS { ciscoFrLmiMIBGroup,
+                                   ciscoFrCircuitMIBGroup,
+                                   ciscoExtCircuitMIBGroup1,
+                                   ciscoFrTsMIBGroup,
+                                   ciscoFrMapMIBGroup,
+                                   ciscoFrSvcMIBGroup,
+                                   ciscoFrElmiMIBGroup1,
+                                   ciscoFrFragMIBGroup,
+                                   ciscoFrConnMIBGroup}
+        ::= { ciscoFrMIBCompliances 5 }
+
+-- units of conformance:
+
+ciscoFrMIBGroup OBJECT-GROUP
+        OBJECTS {
+            cfrLmiLinkstatus,
+            cfrLmiLinkType,
+            cfrLmiEnquiryIns,
+            cfrLmiEnquiryOuts,
+            cfrLmiStatusIns,
+            cfrLmiStatusOuts,
+            cfrLmiUpdateStatusIns,
+            cfrLmiUpdateStatusOuts,
+            cfrLmiStatusTimeouts,
+            cfrLmiStatusEnqTimeouts,
+            cfrLmiN392Dce,
+            cfrLmiN393Dce,
+            cfrLmiT392Dce,
+            cfrCircuitDEins,
+            cfrCircuitDEouts,
+            cfrCircuitDropPktsOuts,
+            cfrCircuitType,
+            cfrExtCircuitIfName,
+            cfrExtCircuitIfType,
+            cfrExtCircuitSubifIndex,
+            cfrExtCircuitMapStatus,
+            cfrExtCircuitCreateType,
+            cfrExtCircuitMulticast,
+            cfrExtCircuitRoutedDlci,
+            cfrExtCircuitRoutedIf,
+            cfrMapIndex,
+            cfrMapProtocol,
+            cfrMapAddress,
+            cfrMapType,
+            cfrMapEncaps,
+            cfrMapBroadcast,
+            cfrMapPayloadCompress,
+            cfrMapTcpHdrCompress,
+            cfrSvcAddrLocal,
+            cfrSvcAddrRemote,
+            cfrSvcThroughputIn,
+            cfrSvcMinThruputOut,
+            cfrSvcMinThruputIn,
+            cfrSvcCommitBurstIn,
+            cfrSvcExcessBurstIn,
+            cfrSvcIdleTime
+        }
+        STATUS  deprecated       -- obsoleted by ciscoFrMIBGroupRev1
+        DESCRIPTION
+                "The compliance statement for entities which implement
+                this Cisco Frame Relay MIB."
+        ::= { ciscoFrMIBGroups 1 }
+
+ciscoFrMIBGroupRev1 OBJECT-GROUP
+        OBJECTS {
+            cfrLmiLinkstatus,
+            cfrLmiLinkType,
+            cfrLmiEnquiryIns,
+            cfrLmiEnquiryOuts,
+            cfrLmiStatusIns,
+            cfrLmiStatusOuts,
+            cfrLmiUpdateStatusIns,
+            cfrLmiUpdateStatusOuts,
+            cfrLmiStatusTimeouts,
+            cfrLmiStatusEnqTimeouts,
+            cfrLmiN392Dce,
+            cfrLmiN393Dce,
+            cfrLmiT392Dce,
+            cfrCircuitDEins,
+            cfrCircuitDEouts,
+            cfrCircuitDropPktsOuts,
+            cfrCircuitType,
+            cfrExtCircuitIfName,
+            cfrExtCircuitIfType,
+            cfrExtCircuitSubifIndex,
+            cfrExtCircuitMapStatus,
+            cfrExtCircuitCreateType,
+            cfrExtCircuitMulticast,
+            cfrExtCircuitRoutedDlci,
+            cfrExtCircuitRoutedIf,
+            cfrExtCircuitUncompressIns,  
+            cfrExtCircuitUncompressOuts,
+            cfrMapIndex,
+            cfrMapProtocol,
+            cfrMapAddress,
+            cfrMapType,
+            cfrMapEncaps,
+            cfrMapBroadcast,
+-- removed  cfrMapPayloadCompress, obsoleted by cfrMapPayloadCompressType
+            cfrMapTcpHdrCompress,
+            cfrMapRtpHdrCompress,          
+            cfrMapPayloadCompressType,    
+            cfrSvcAddrLocal,
+            cfrSvcAddrRemote,
+            cfrSvcThroughputIn,
+            cfrSvcMinThruputOut,
+            cfrSvcMinThruputIn,
+            cfrSvcCommitBurstIn,
+            cfrSvcExcessBurstIn,
+            cfrSvcIdleTime
+        }
+        STATUS  deprecated       
+        DESCRIPTION
+                "A collection of objects providing router's
+                Frame Relay configuration and statistics
+                information that are additional to the IETF
+                standard Frame Relay DTE MIB."
+        ::= { ciscoFrMIBGroups 2 }
+
+ciscoFrLmiMIBGroup    OBJECT-GROUP
+        OBJECTS { 
+            cfrLmiLinkstatus, cfrLmiLinkType, cfrLmiEnquiryIns,
+            cfrLmiEnquiryOuts, cfrLmiStatusIns, cfrLmiStatusOuts,
+            cfrLmiUpdateStatusIns, cfrLmiUpdateStatusOuts,
+            cfrLmiStatusTimeouts, cfrLmiStatusEnqTimeouts,
+            cfrLmiN392Dce, cfrLmiN393Dce, cfrLmiT392Dce
+        }   
+        STATUS current
+        DESCRIPTION
+                "A collection of objects providing router's
+                 Frame Relay LMI configuration and statistics
+                 information either supplemental to the 
+                 frDlcmiTable of RFC 1315 or specific to Cisco's 
+                 implementation."
+        ::= { ciscoFrMIBGroups 3 }
+ 
+ciscoFrCircuitMIBGroup    OBJECT-GROUP
+        OBJECTS { 
+            cfrCircuitDEins, cfrCircuitDEouts,
+            cfrCircuitDropPktsOuts, cfrCircuitType
+        }   
+        STATUS current
+        DESCRIPTION
+                "A collection of objects providing information of a
+                circuit that are not included in frCircuitTable of
+                RFC1315 but are generic to Frame Relay."
+        ::= { ciscoFrMIBGroups 4 }
+
+ciscoExtCircuitMIBGroup    OBJECT-GROUP
+        OBJECTS { 
+            cfrExtCircuitIfName, cfrExtCircuitIfType,
+            cfrExtCircuitSubifIndex, cfrExtCircuitMapStatus,
+            cfrExtCircuitCreateType, cfrExtCircuitMulticast,
+            cfrExtCircuitRoutedDlci, cfrExtCircuitRoutedIf,
+            cfrExtCircuitUncompressIns, cfrExtCircuitUncompressOuts,
+            cfrExtCircuitFECNOuts, cfrExtCircuitBECNOuts,
+            cfrExtCircuitMinThruputOut, cfrExtCircuitMinThruputIn,
+            cfrExtCircuitBcastPktOuts, cfrExtCircuitBcastByteOuts,
+            cfrExtCircuitBandwidth
+        }   
+        STATUS  deprecated       
+        DESCRIPTION
+                "A collection of objects that provide Cisco 
+                implementation specific FR circuit information. 
+                This is a Cisco extension for the frCircuitTable 
+                of RFC 1315."
+        ::= { ciscoFrMIBGroups 5 }
+
+ciscoExtCircuitMIBGroup1    OBJECT-GROUP
+        OBJECTS {
+            cfrExtCircuitIfName, cfrExtCircuitIfType,
+            cfrExtCircuitSubifIndex, cfrExtCircuitMapStatus,
+            cfrExtCircuitCreateType, cfrExtCircuitMulticast,
+            cfrExtCircuitRoutedDlci, cfrExtCircuitRoutedIf,
+            cfrExtCircuitUncompressIns, cfrExtCircuitUncompressOuts,
+            cfrExtCircuitFECNOuts, cfrExtCircuitBECNOuts,
+            cfrExtCircuitMinThruputOut, cfrExtCircuitMinThruputIn,
+            cfrExtCircuitBcastPktOuts, cfrExtCircuitBcastByteOuts,
+            cfrExtCircuitBandwidth, cfrExtCircuitTxDataRate,
+            cfrExtCircuitTxPktRate, cfrExtCircuitRcvDataRate,
+            cfrExtCircuitRcvPktRate
+        }
+        STATUS current
+        DESCRIPTION
+                "A collection of objects that provide Cisco
+                implementation specific FR circuit information.
+                This is a Cisco extension for the frCircuitTable
+                of RFC 1315."
+        ::= { ciscoFrMIBGroups 13 }
+
+
+ciscoFrTsMIBGroup    OBJECT-GROUP
+        OBJECTS { 
+            cfrExtCircuitShapeByteLimit, cfrExtCircuitShapeInterval,
+            cfrExtCircuitShapeByteIncrement, cfrExtCircuitShapePkts,
+            cfrExtCircuitShapeBytes, cfrExtCircuitShapePktsDelay,
+            cfrExtCircuitShapeBytesDelay, cfrExtCircuitShapeActive,
+            cfrExtCircuitShapeAdapting
+        }   
+        STATUS current
+        DESCRIPTION
+                "A collection of objects that provide information
+                about Frame Relay Traffic Shaping. These are 
+                additional to the IETF standard Frame Relay DTE MIB." 
+        ::= { ciscoFrMIBGroups 6 }
+
+ciscoFrMapMIBGroup    OBJECT-GROUP
+        OBJECTS { 
+            cfrMapIndex, cfrMapProtocol, cfrMapAddress,
+            cfrMapType, cfrMapEncaps, cfrMapBroadcast,
+            cfrMapTcpHdrCompress, cfrMapRtpHdrCompress,         
+            cfrMapPayloadCompressType  
+        }   
+        STATUS current
+        DESCRIPTION
+                "A collection of objects to provide mapping 
+                information of a Frame Relay virtual circuit.
+                These are additional to the IETF standard 
+                Frame Relay DTE MIB."
+        ::= { ciscoFrMIBGroups 7 }
+
+ciscoFrSvcMIBGroup    OBJECT-GROUP
+        OBJECTS { 
+            cfrSvcAddrLocal,
+            cfrSvcAddrRemote,
+            cfrSvcThroughputIn,
+            cfrSvcCommitBurstIn,
+            cfrSvcExcessBurstIn,
+            cfrSvcIdleTime
+        }   
+        STATUS current
+        DESCRIPTION
+                "A collection of objects to provide circuit
+                information specific to a Frame Relay Switched
+                Virtual Circuit.This is in addition to the IETF 
+                standard Frame Relay DTE MIB."        
+        ::= { ciscoFrMIBGroups 8 }
+
+ciscoFrElmiMIBGroup    OBJECT-GROUP
+        OBJECTS {
+            cfrElmiIpAddr, cfrElmiArStatus, cfrElmiRemoteStatus,
+            cfrElmiNeighborArStatus, cfrElmiNeighborIpAddress,
+            cfrElmiNeighborIfIndex, cfrElmiNeighborVendorName,
+            cfrElmiNeighborPlatformName, cfrElmiNeighborDeviceName
+        }
+        STATUS deprecated
+        DESCRIPTION
+                "A collection of objects providing router's
+                ELMI information."
+        ::= { ciscoFrMIBGroups 9 }
+
+ciscoFrElmiMIBGroup1    OBJECT-GROUP
+        OBJECTS {
+            cfrElmiIpAddr, cfrElmiArStatus, cfrElmiRemoteStatus,
+            cfrElmiNeighborArStatus, cfrElmiNeighborIpAddress,
+            cfrElmiNeighborIfIndex, cfrElmiNeighborVendorName,
+            cfrElmiNeighborPlatformName, cfrElmiNeighborDeviceName,
+            cfrElmiLinkStatus
+        }
+        STATUS current
+        DESCRIPTION
+                "A collection of objects providing router's
+                ELMI information."
+        ::= { ciscoFrMIBGroups 10 }
+
+ciscoFrFragMIBGroup    OBJECT-GROUP
+        OBJECTS {
+            cfrFragSize, cfrFragType, cfrFragInPkts, cfrFragOutPkts,
+            cfrFragInOctets, cfrFragOutOctets, cfrFragNotInPkts,
+            cfrFragNotOutPkts, cfrFragNotInOctets, cfrFragNotOutOctets,
+            cfrFragAssembledInPkts, cfrFragAssembledInOctets, 
+            cfrFragPreOutPkts, cfrFragPreOutOctets,
+            cfrFragDroppedReAssembledInPkts, 
+            cfrFragDroppedFragmentedOutPkts,
+            cfrFragTimeoutsIn, cfrFragOutOfSeqFragPkts,
+            cfrFragUnexpectedBBitSetPkts, cfrFragSeqMissedPkts, 
+            cfrFragInterleavedOutPkts  
+        }
+        STATUS current
+        DESCRIPTION
+                "A collection of objects providing router's
+                fragmentation information."
+        ::= { ciscoFrMIBGroups 11 }
+            
+ciscoFrConnMIBGroup    OBJECT-GROUP
+        OBJECTS {
+            cfrConnName, cfrConnID, cfrConnState, cfrConnSegment1Name,
+            cfrConnSegment1VCGroup, cfrConnSegment1Dlci,  
+            cfrConnSegment2Name, cfrConnSegment2Vpi,
+            cfrConnSegment2Vci, cfrConnServiceTranslation, 
+            cfrConnFrSscsDlci, cfrConnEfciBit,
+            cfrConnDeBit, cfrConnClpBit        
+        }
+        STATUS current
+        DESCRIPTION
+                "A collection of objects providing router's
+                fragmentation information."
+        ::= { ciscoFrMIBGroups 12 }
+            
+
+END
+