Initial commitHEADmain

1 files changed, 1106 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-LAG-MIB b/MIBS/cisco/CISCO-LAG-MIB
new file mode 100644
index 0000000..a299738
--- /dev/null
+++ b/MIBS/cisco/CISCO-LAG-MIB
@@ -0,0 +1,1106 @@
+-- *****************************************************************
+-- CISCO-LAG-MIB.my: Cisco LAG MIB
+--   
+-- October 2001,  Liwei Lue
+--   
+-- Copyright (c) 2001-2003, 2004, 2006, 2008-2010, 2014 by cisco 
+-- Systems Inc.
+-- All rights reserved.
+--   
+-- *****************************************************************
+
+CISCO-LAG-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Unsigned32
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF
+    TEXTUAL-CONVENTION,
+    TruthValue
+        FROM SNMPv2-TC
+    dot3adAggPortEntry,
+    dot3adAggPortListEntry
+        FROM IEEE8023-LAG-MIB
+    CiscoInterfaceIndexList
+      FROM CISCO-TC
+    ifIndex
+        FROM IF-MIB
+    ciscoMgmt
+        FROM CISCO-SMI;
+
+
+ciscoLagMIB MODULE-IDENTITY
+    LAST-UPDATED    "201401140000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail:  cs-etherchan@cisco.com
+             cs-lan-switch-snmp@cisco.com"
+    DESCRIPTION
+        "Cisco Link Aggregation module for managing IEEE Std
+        802.3ad.
+
+        This MIB provides Link Aggregation information that are
+        either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB)
+        or specific to Cisco products."
+    REVISION     "201401140000Z"
+    DESCRIPTION
+        "Added clagAggPortListInterfaceIndexGroup."
+    REVISION     "201010200000Z"
+    DESCRIPTION
+        "Added new enum values vlanIp(5) and ipPort(6) to
+         ClagDistributionProtocol textual convention."
+    REVISION        "200911190000Z"
+    DESCRIPTION
+        "Added clagAggRateGroup, clagAggChannelIfLacpGroup,
+        clagAggChannelIfHashDistMethodGroup, clagAggChannelIfMinLinkGroup
+        and clagAggHashDistGlobalGroup."
+    REVISION        "200801080000Z"
+    DESCRIPTION
+        "Modified the description of clagAggPortListPorts."
+    REVISION        "200606210000Z"
+    DESCRIPTION
+        "Added clagAggMaxAggregatorsGroup and modified the
+        description of clagAggPortListPorts."
+    REVISION        "200406110000Z"
+    DESCRIPTION
+        "Added clagAggPortListTable."
+    REVISION        "200212130000Z"
+    DESCRIPTION
+        "Added a new value vlanIpPort(4) in TEXTUAL-CONVENTION
+        ClagDistributionProtocol.
+        Added a new object clagAggDistributionMplsProtocol."
+    REVISION        "200201020000Z"
+    DESCRIPTION
+        "Modified Description of clagAggDistributionProtocol."
+    REVISION        "200110230000Z"
+    DESCRIPTION
+        "Initial version of this MIB module.
+        Support Distribution configuration for LACP, Aggregation 
+        protocol control, and  Administrative status for LACP."
+    ::= { ciscoMgmt 225 }
+
+
+clagMIBObjects  OBJECT IDENTIFIER
+    ::= { ciscoLagMIB 1 }
+
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+
+ClagDistributionProtocol ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An enumerated type for all the supported load balancing
+        algorithms used on the port channel interface to distribute 
+        outgoing data frames among its component interaces, such 
+        as IP address.  
+
+        ip(1)               IP address
+        mac(2)              MAC address 
+        port(3)             port number
+        vlanIpPort(4)       vlan number, IP address and
+                            port number
+        vlanIp(5)           VLAN number and IP address
+        ipPort(6)           IP address and port number"
+    SYNTAX          INTEGER  {
+                        ip(1),
+                        mac(2),
+                        port(3),
+                        vlanIpPort(4),
+                        vlanIp(5),
+                        ipPort(6)
+                    }
+
+ClagDistributionAddressMode ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An enumerated type for all the supported load
+        balancing address modes to distribute traffic
+        across multiple links.  The address mode can be 
+        source, destination, or both used on this port 
+        channel interface to distribute outgoing data frames 
+        among its component interfaces. 
+
+        source(1)         Source address.
+        destination(2)    Destination address.
+        both(3)           both, Source and Destination."
+    SYNTAX          INTEGER  {
+                        source(1),
+                        destination(2),
+                        both(3)
+                    }
+
+ClagDistributionMplsProtocol ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An enumerated type for all the supported load balancing
+        algorithms used on the port channel interface to distribute 
+        outgoing MPLS (Multi-Protocol Label Switching) data 
+        frames among its component interfaces, such as 
+        MPLS label.
+
+        label(1)            MPLS label
+        labelIp(2)          MPLS label or IP address"
+    SYNTAX          INTEGER  {
+                        label(1),
+                        labelIp(2)
+                    }
+
+ClagAggregationProtocol ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An enumerated type for all the supported aggregation
+        protocols.
+
+        lacp(1)     Link Aggregation Control Protocol(LACP),
+                    IEEE 802.3ad
+        pagp(2)     Port Aggregation Protocol"
+    SYNTAX          INTEGER  {
+                        lacp(1),
+                        pagp(2)
+                    }
+
+ClagPortAdminStatus ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "An enumerated type for all the LACP administrative states on
+        a particular aggregation port.
+
+        off(1)          No LACP involved on the aggregation port.
+
+        on(2)           The aggregation port always join link
+                        aggregation whithout any LACP protocol
+                        involved.
+
+        active(3)       Active LACP indicates the port's preference
+                        to participate in the protocol regardless of
+                        Partner's control value.
+
+        passive(4)      Passive indicates the port's preference for
+                        not transmitting LACP PDU unless its Partner's
+                        control value is Active LACP."
+    SYNTAX          INTEGER  {
+                        off(1),
+                        on(2),
+                        active(3),
+                        passive(4)
+                    }
+-- -------------------------------------------------------------
+--   
+-- -------------------------------------------------------------
+-- groups in the LAG MIB
+-- -------------------------------------------------------------
+
+clagGlobalConfigObjects  OBJECT IDENTIFIER
+    ::= { clagMIBObjects 1 }
+
+clagAgg  OBJECT IDENTIFIER
+    ::= { clagMIBObjects 2 }
+
+clagAggPort  OBJECT IDENTIFIER
+    ::= { clagMIBObjects 3 }
+
+clagAggPortList  OBJECT IDENTIFIER
+    ::= { clagMIBObjects 4 }
+
+clagAggChannelIntf  OBJECT IDENTIFIER
+    ::= { clagMIBObjects 5 }
+
+
+-- -------------------------------------------------------------
+--   
+-- -------------------------------------------------------------
+-- The Aggregation Global Configuration
+-- -------------------------------------------------------------
+
+clagAggDistributionProtocol OBJECT-TYPE
+    SYNTAX          ClagDistributionProtocol
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object controls the load balancing algorithms
+        used on this port channel interface to distribute outgoing 
+        data frames among its component interfaces." 
+    ::= { clagGlobalConfigObjects 1 }
+
+clagAggDistributionAddressMode OBJECT-TYPE
+    SYNTAX          ClagDistributionAddressMode
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The load balancing address mode for the device." 
+    ::= { clagGlobalConfigObjects 2 }
+
+clagAggDistributionMplsProtocol OBJECT-TYPE
+    SYNTAX          ClagDistributionMplsProtocol
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object controls the load balancing algorithms
+        used on this port channel interface to distribute 
+        outgoing MPLS data frames among its component interfaces.
+
+        This object is only instantiated on platforms which 
+        support aggregation load balancing for MPLS packets." 
+    ::= { clagGlobalConfigObjects 3 }
+
+clagAggMaxAggregators OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indicates the maximum number of aggregators
+        supported by the device." 
+    ::= { clagGlobalConfigObjects 4 }
+
+clagAggHashDistMethodGlobalConfig OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        adaptive(1),
+                        fixed(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Specifies the global configuration for hash
+        distribution method applied on a port channel 
+        interface among its channel members.
+
+        adaptive(1)  :  Adaptive hash distribution for the bundle
+                        among port channel members.
+        fixed(2)     :  Fixed hash distribution for the bundle
+                        among port channel members." 
+    ::= { clagGlobalConfigObjects 5 }
+-- -------------------------------------------------------------
+-- The Aggregation Protocol Table
+-- -------------------------------------------------------------
+
+clagAggProtocolTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF ClagAggProtocolEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table that contains protocol information about every
+        interface which supports link aggregation."
+    ::= { clagAgg 1 }
+
+clagAggProtocolEntry OBJECT-TYPE
+    SYNTAX          ClagAggProtocolEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Entry containing aggregation protocol type for a
+        particular interface.  An entry is created in this
+        table when its associated ifEntry is created and that 
+        interface supports link aggregation.  The entry of this
+        table is deleted when the associated ifEntry is removed."
+    INDEX           { ifIndex } 
+    ::= { clagAggProtocolTable 1 }
+
+ClagAggProtocolEntry ::= SEQUENCE {
+        clagAggProtocolType ClagAggregationProtocol
+}
+
+clagAggProtocolType OBJECT-TYPE
+    SYNTAX          ClagAggregationProtocol
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The aggregation protocol type for the interface.
+
+        On some platforms, aggregation protocol may be assigned per
+        group.  The group can be a collection of the ports which belong
+        to a module or system.  If the aggregation protocol is assigned
+        to any of the ports in such group then the aggregation protocol
+        will apply to all ports in the same group.
+
+        On some platforms, aggregation protocol type  can be assigned
+        per aggregator.  If multiple ports belong to a aggregator,
+        the aggregation protocol assigned to any of the ports in such
+        aggregator will apply to all ports in the same." 
+    ::= { clagAggProtocolEntry 1 }
+ 
+
+-- -------------------------------------------------------------
+-- The Aggregation Port Configuration Table
+-- -------------------------------------------------------------
+
+clagAggPortTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF ClagAggPortEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table that contains information about every
+        aggregation port that is associated with this system.
+        This table contains additional objects for the
+        dot3adAggPortTable."
+    REFERENCE       "IEEE 802.3 Subclause 30.7.2"
+    ::= { clagAggPort 1 }
+
+clagAggPortEntry OBJECT-TYPE
+    SYNTAX          ClagAggPortEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry containing additional management information
+        applicable to a particular aggregation port."
+    AUGMENTS           { dot3adAggPortEntry  } 
+    ::= { clagAggPortTable 1 }
+
+ClagAggPortEntry ::= SEQUENCE {
+        clagAggPortAdminStatus ClagPortAdminStatus,
+        clagAggPortRate        INTEGER
+}
+
+clagAggPortAdminStatus OBJECT-TYPE
+    SYNTAX          ClagPortAdminStatus
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The administrative status of the LACP protocol on this
+        aggregation port." 
+    ::= { clagAggPortEntry 1 }
+
+clagAggPortRate OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        fast(1),
+                        normal(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Specifies the requested exchange rate of LACP packets
+        on this interface.
+        fast(1)  :    The device requests its peers to send LACP packets 
+                      at fast rate to this interface.
+        normal(2):    The decice requests its peers to send LACP packets
+                      at normal rate to this interface." 
+    ::= { clagAggPortEntry 2 }
+ 
+
+-- -------------------------------------------------------------
+-- The Port List Table
+-- -------------------------------------------------------------
+
+clagAggPortListTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF ClagAggPortListEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table augments the dot3adAggPortListTable and
+        provides the complete list of ports associated with
+        each Aggregator."
+    REFERENCE       "IEEE 802.3 Subclause 30.7.1.1.30"
+    ::= { clagAggPortList 1 }
+
+clagAggPortListEntry OBJECT-TYPE
+    SYNTAX          ClagAggPortListEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A list of the ports associated with a given Aggregator."
+    AUGMENTS           { dot3adAggPortListEntry  } 
+    ::= { clagAggPortListTable 1 }
+
+ClagAggPortListEntry ::= SEQUENCE {
+        clagAggPortListPorts              OCTET STRING,
+        clagAggPortListInterfaceIndexList CiscoInterfaceIndexList
+}
+
+clagAggPortListPorts OBJECT-TYPE
+    SYNTAX          OCTET STRING (SIZE  (2..256))
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object contains a list of ports currently associated
+        with this Aggregator in the format of
+        '[number_of_ports][cieIfDot1dBaseMappingPort1][...]
+         [cieIfDot1dBaseMappingPortn]'
+
+        where
+        [number_of_ports] is of size 2 octet and indicates
+        the number of ports contains in this object. It
+        also indicates the number of cieIfDot1dBaseMappingPort field
+        following this field. 
+
+        [cieIfDot1dBaseMappingPort'n'] is the value of 
+        cieIfDot1dBaseMappingPort of the 'n' port associated with this
+        Aggregation and has size of 2 octets where n is up to
+        [number_of_ports]."
+    REFERENCE       "IEEE 802.3 Subclause 30.7.1.1.30" 
+    ::= { clagAggPortListEntry 1 }
+ 
+clagAggPortListInterfaceIndexList OBJECT-TYPE
+    SYNTAX          CiscoInterfaceIndexList
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     
+        "This object contains a list of ports currently associated
+        with this Aggregator in the format of CiscoInterfaceIndexList."
+    REFERENCE       "IEEE 802.3 Subclause 30.7.1.1.30" 
+    ::= { clagAggPortListEntry 2}
+
+
+-- -------------------------------------------------------------
+-- The Aggregation Channel Interface Table
+-- -------------------------------------------------------------
+
+clagAggChannelIfTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF ClagAggChannelIfEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A table providing port channel
+        configuration information for port channel
+        interfaces identified by ifIndex."
+    ::= { clagAggChannelIntf 1 }
+
+clagAggChannelIfEntry OBJECT-TYPE
+    SYNTAX          ClagAggChannelIfEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry containing port channel
+        configuration information for port 
+        channel interfaces."
+    INDEX           { ifIndex } 
+    ::= { clagAggChannelIfTable 1 }
+
+ClagAggChannelIfEntry ::= SEQUENCE {
+        clagAggChannelIfFastSwitchOver      TruthValue,
+        clagAggChannelIfMaxBundle           Unsigned32,
+        clagAggChannelIfMinLink             Unsigned32,
+        clagAggChannelIfHashDistAdminMethod INTEGER,
+        clagAggChannelIfHashDistOperMethod  INTEGER
+}
+
+clagAggChannelIfFastSwitchOver OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Specifies whether LACP protocol fast switchover
+        mode is enabled on this port channel interface
+        or not." 
+    ::= { clagAggChannelIfEntry 1 }
+
+clagAggChannelIfMaxBundle OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4294967295)
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Specifies the maximum number of member
+        ports that can be bundled on this port
+        channel interface for LACP protocol." 
+    ::= { clagAggChannelIfEntry 2 }
+
+clagAggChannelIfMinLink OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Specifies the minimum number of bundled member ports that are
+        needed in order for this port channel interface to be
+        operational.
+        A value of zero for this object indicates that no minimum
+        number of bundled member ports are required for this port
+        channel interface to be operational." 
+    ::= { clagAggChannelIfEntry 3 }
+
+clagAggChannelIfHashDistAdminMethod OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        none(1),
+                        adaptive(2),
+                        fixed(3)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Specifies the hash distribution method that is administratively
+        configured on this port channel interface upon its channel 
+        membership transition event. 
+
+        none(1)      :  Hash distribution algorithm on this 
+                        port channel interface is not specifically 
+                        configured and global configuration of 
+                        clagAggHashDistMethodGlobalConfig will
+                        be applied on this port channel interface.
+        adaptive(2)  :  Adaptive hash distribution for this port 
+                        channel interface among its channel members.
+        fixed(3)     :  Fixed hash distribution for this port channel
+                        interface among its channel members." 
+    ::= { clagAggChannelIfEntry 4 }
+
+clagAggChannelIfHashDistOperMethod OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        other(1),
+                        adaptive(2),
+                        fixed(3)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Specifies the operational hash distribution method
+        for this port channel interface among the port channel members.
+
+        other(1)        : None of the following. 
+        adaptive(2)     : Adaptive hash distribution for the 
+                          port channel interface among its 
+                          channel members.
+        fixed(3)        : Fixed hash distribution for the port
+                          channel among channel members." 
+    ::= { clagAggChannelIfEntry 5 }
+ 
+
+-- -------------------------------------------------------------
+-- Notifications
+-- -------------------------------------------------------------
+
+clagMIBNotifications  OBJECT IDENTIFIER
+    ::= { ciscoLagMIB 2 }
+
+-- no notifications defined
+--   
+-- -------------------------------------------------------------
+-- Conformance
+-- -------------------------------------------------------------
+
+clagMIBConformance  OBJECT IDENTIFIER
+    ::= { ciscoLagMIB 3 }
+
+clagMIBCompliances  OBJECT IDENTIFIER
+    ::= { clagMIBConformance 1 }
+
+clagMIBGroups  OBJECT IDENTIFIER
+    ::= { clagMIBConformance 2 }
+
+
+-- -------------------------------------------------------------
+--   
+-- -------------------------------------------------------------
+-- Compliance
+-- -------------------------------------------------------------
+
+clagMIBCompliance MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Link Aggregation MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        clagAggProtocolGroup,
+                        clagAggPortGroup
+                    }
+
+    GROUP           clagAggDistributionGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing."
+
+    OBJECT          clagAggProtocolType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggPortAdminStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { clagMIBCompliances 1 }
+
+clagMIBCompliance2 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Link Aggregation MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        clagAggProtocolGroup,
+                        clagAggPortGroup
+                    }
+
+    GROUP           clagAggDistributionGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing."
+
+    GROUP           clagAggDistributionMplsGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing for MPLS
+        packets."
+
+    OBJECT          clagAggProtocolType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggPortAdminStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { clagMIBCompliances 2 }
+
+clagMIBCompliance3 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Link Aggregation MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        clagAggProtocolGroup,
+                        clagAggPortGroup
+                    }
+
+    GROUP           clagAggDistributionGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing."
+
+    GROUP           clagAggDistributionMplsGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing for MPLS
+        packets."
+
+    GROUP           clagAggPortListGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supports dot1dBasePort value greater than 2048."
+
+    OBJECT          clagAggProtocolType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggPortAdminStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { clagMIBCompliances 3 }
+
+clagMIBCompliance4 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Link Aggregation MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        clagAggProtocolGroup,
+                        clagAggPortGroup
+                    }
+
+    GROUP           clagAggDistributionGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing."
+
+    GROUP           clagAggDistributionMplsGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing for MPLS
+        packets."
+
+    GROUP           clagAggPortListGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supports dot1dBasePort value greater than 2048."
+
+    GROUP           clagAggMaxAggregatorsGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        provides the information about the maximum number
+        of aggregators supported by the device."
+
+    OBJECT          clagAggProtocolType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggPortAdminStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { clagMIBCompliances 4 }
+
+clagMIBCompliance5 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Link Aggregation MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        clagAggProtocolGroup,
+                        clagAggPortGroup
+                    }
+
+    GROUP           clagAggDistributionGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing."
+
+    GROUP           clagAggDistributionMplsGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing for MPLS
+        packets."
+
+    GROUP           clagAggPortListGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supports dot1dBasePort value greater than 2048."
+
+    GROUP           clagAggMaxAggregatorsGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        provides the information about the maximum number
+        of aggregators supported by the device."
+
+    GROUP           clagAggRateGroup
+    DESCRIPTION
+        "This group is mandatory for devices that support
+        LACP packet ingression rate on interfaces."
+
+    GROUP           clagAggChannelIfLacpGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        support the LACP port channel configurations on  
+        port channel interfaces."
+
+    GROUP           clagAggChannelIfHashDistMethodGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        support the hash distribution method configurations on
+        port channel interfaces."
+
+    GROUP           clagAggHashDistGlobalGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which support
+        global configuration of hash distribution method on
+        port channel interface."
+
+    GROUP           clagAggChannelIfMinLinkGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        support minimum link configurations on port channel 
+        interfaces."
+
+    OBJECT          clagAggDistributionProtocol
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggDistributionAddressMode
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggDistributionMplsProtocol
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggHashDistMethodGlobalConfig
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggProtocolType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggPortAdminStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggPortRate
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggChannelIfFastSwitchOver
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggChannelIfMaxBundle
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggChannelIfMinLink
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggChannelIfHashDistAdminMethod
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { clagMIBCompliances 5 }
+
+clagMIBCompliance6 MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco Link Aggregation MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        clagAggProtocolGroup,
+                        clagAggPortGroup
+                    }
+
+    GROUP           clagAggDistributionGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing."
+
+    GROUP           clagAggDistributionMplsGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supported aggregation load balancing for MPLS
+        packets."
+
+    GROUP           clagAggPortListGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        supports dot1dBasePort value greater than 2048."
+
+    GROUP           clagAggMaxAggregatorsGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        provides the information about the maximum number
+        of aggregators supported by the device."
+
+    GROUP           clagAggRateGroup
+    DESCRIPTION
+        "This group is mandatory for devices that support
+        LACP packet ingression rate on interfaces."
+
+    GROUP           clagAggChannelIfLacpGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        support the LACP port channel configurations on  
+        port channel interfaces."
+
+    GROUP           clagAggChannelIfHashDistMethodGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        support the hash distribution method configurations on
+        port channel interfaces."
+
+    GROUP           clagAggHashDistGlobalGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which support
+        global configuration of hash distribution method on
+        port channel interface."
+
+    GROUP           clagAggChannelIfMinLinkGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        support minimum link configurations on port channel 
+        interfaces."
+
+    GROUP           clagAggPortListInterfaceIndexGroup
+    DESCRIPTION
+        "This group is mandatory for the devices which
+        support Layer3 LACP interfaces."
+
+    OBJECT          clagAggDistributionProtocol
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggDistributionAddressMode
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggDistributionMplsProtocol
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggHashDistMethodGlobalConfig
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggProtocolType
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggPortAdminStatus
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggPortRate
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggChannelIfFastSwitchOver
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggChannelIfMaxBundle
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggChannelIfMinLink
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+
+    OBJECT          clagAggChannelIfHashDistAdminMethod
+    MIN-ACCESS      read-only
+    DESCRIPTION
+        "Write access is not required."
+    ::= { clagMIBCompliances 6 }
+
+
+-- -------------------------------------------------------------
+-- Units of Conformance
+-- -------------------------------------------------------------
+
+clagAggProtocolGroup OBJECT-GROUP
+    OBJECTS         { clagAggProtocolType }
+    STATUS          current
+    DESCRIPTION
+        "The object that provide aggregation protocol type of an
+        interface. These are additional to the IEEE Std 802.3ad
+        MIB."
+    ::= { clagMIBGroups 1 }
+
+clagAggPortGroup OBJECT-GROUP
+    OBJECTS         { clagAggPortAdminStatus }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects that provide admin status
+        about an aggregation port.  These are additional to the
+        IEEE Std 802.3ad MIB."
+    ::= { clagMIBGroups 2 }
+
+clagAggDistributionGroup OBJECT-GROUP
+    OBJECTS         {
+                        clagAggDistributionProtocol,
+                        clagAggDistributionAddressMode
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects that provide the load balancing
+        information for an aggregator.  These are additional to
+        the IEEE Std 802.3ad MIB."
+    ::= { clagMIBGroups 3 }
+
+clagAggDistributionMplsGroup OBJECT-GROUP
+    OBJECTS         { clagAggDistributionMplsProtocol }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects that provide the load balancing
+        information for an aggregator for MPLS packets.  
+        These are additional to the IEEE Std 802.3ad MIB."
+    ::= { clagMIBGroups 4 }
+
+clagAggPortListGroup OBJECT-GROUP
+    OBJECTS         { clagAggPortListPorts }
+    STATUS          current
+    DESCRIPTION
+        "A collection of object that provides information about
+        ports in an aggregation."
+    ::= { clagMIBGroups 5 }
+
+clagAggMaxAggregatorsGroup OBJECT-GROUP
+    OBJECTS         { clagAggMaxAggregators }
+    STATUS          current
+    DESCRIPTION
+        "A collection of object that provides information about
+        the maximum number of aggregators supported by the 
+        device."
+    ::= { clagMIBGroups 6 }
+
+clagAggRateGroup OBJECT-GROUP
+    OBJECTS         { clagAggPortRate }
+    STATUS          current
+    DESCRIPTION
+        "A collection of object that provides information about
+        the rate at which LACP packets are ingressed on 
+        interfaces."
+    ::= { clagMIBGroups 7 }
+
+clagAggChannelIfLacpGroup OBJECT-GROUP
+    OBJECTS         {
+                        clagAggChannelIfFastSwitchOver,
+                        clagAggChannelIfMaxBundle
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects that provides information about
+        the LACP protocol configurations for port channel
+        interfaces."
+    ::= { clagMIBGroups 8 }
+
+clagAggChannelIfHashDistMethodGroup OBJECT-GROUP
+    OBJECTS         {
+                        clagAggChannelIfHashDistAdminMethod,
+                        clagAggChannelIfHashDistOperMethod
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects that provides information about
+        the port channel configurations of hash distribution
+        method on port channel interfaces."
+    ::= { clagMIBGroups 9 }
+
+clagAggHashDistGlobalGroup OBJECT-GROUP
+    OBJECTS         { clagAggHashDistMethodGlobalConfig }
+    STATUS          current
+    DESCRIPTION
+        "A collection of object that provides information about global
+        configuration of hash distribution method on port channel 
+        interface."
+    ::= { clagMIBGroups 10 }
+
+clagAggChannelIfMinLinkGroup OBJECT-GROUP
+    OBJECTS         {
+                        clagAggChannelIfMinLink
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects that provides information about
+        the minimum link configurations for port channel
+        interfaces."
+    ::= { clagMIBGroups 11 }
+
+clagAggPortListInterfaceIndexGroup OBJECT-GROUP
+    OBJECTS         {
+                        clagAggPortListInterfaceIndexList
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects that provides information about
+         ports in an aggregation in the format of 
+         CiscoInterfaceIndexList."
+    ::= { clagMIBGroups 12 }
+
+END
+