Initial commitHEADmain

1 files changed, 2763 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-SLB-HEALTH-MON-MIB b/MIBS/cisco/CISCO-SLB-HEALTH-MON-MIB
new file mode 100644
index 0000000..4043a9a
--- /dev/null
+++ b/MIBS/cisco/CISCO-SLB-HEALTH-MON-MIB
@@ -0,0 +1,2763 @@
+-- *****************************************************************
+-- CISCO-SLB-HEALTH-MON-MIB.my: Server Load-Balancing(SLB) Health
+-- Monitoring MIB
+-- January 2006, Saifullah M.A.
+--   
+-- Copyright (c) 2002, 2005, 2006, 2008 by cisco Systems Inc.
+-- All rights reserved.
+-- *****************************************************************
+
+CISCO-SLB-HEALTH-MON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    NOTIFICATION-TYPE,
+    Unsigned32,
+    Counter32,
+    Gauge32
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    NOTIFICATION-GROUP,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB
+    InetAddressType,
+    InetAddress,
+    InetPortNumber
+        FROM INET-ADDRESS-MIB
+    TimeInterval,
+    TEXTUAL-CONVENTION,
+    TruthValue,
+    DateAndTime,
+    RowStatus
+        FROM SNMPv2-TC
+    CiscoPort
+        FROM CISCO-TC
+    slbEntity,
+    SlbServerString,
+    slbServerFarmName
+        FROM CISCO-SLB-MIB
+    SlbUrlString,
+    SlbFunctionNameString,
+    cslbxServerProbes
+        FROM CISCO-SLB-EXT-MIB
+    ciscoMgmt
+        FROM CISCO-SMI;
+
+
+ciscoSlbHealthMonMIB MODULE-IDENTITY
+    LAST-UPDATED    "200806260000Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W. Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-slb@cisco.com"
+    DESCRIPTION
+        "An extension to the CISCO-SLB-EXT-MIB for SLB
+        health monitoring probes. 
+
+        SLB: Server Load Balancing. Server load balancing
+        provides for the balancing of packets and connections
+        arriving at the SLB device across a number of other
+        devices, such as real servers, firewalls, or caches.
+        A system containing an SLB device typically exhibits
+        higher performance, scalability, and reliability than
+        any of the devices being load balanced.  An SLB device
+        determines how to handle incoming frames and
+        connections according to the contents of incoming data
+        and various configuration options. In determining how
+        to handle incoming data, an SLB device may examine the
+        data at any OSI layer, including Layer 7.
+
+        This MIB includes information on the health monitoring
+        probes that can be used for monitoring the health of
+        real servers. Health checking provides the ability of 
+        the content switch to detect if a server is available 
+        for load balancing. Health probes used for health 
+        checking allow testing various application level 
+        functionality. The active probes are sent at regular 
+        intervals and the lack of a response can lead to a 
+        specific server or and entire group of servers being 
+        declared as not available.
+
+         Following probes are based on TCP:
+            http, https, smtp, telnet, ftp, tcp, 
+            script, ldap, tacacs, sip, echo, finger.
+         Following probes are based on UDP:
+            tftp, udp, sip, echo,.
+
+        Acronyms and terms:
+
+          SLB    Server Load Balancing
+          VIP    Virtual Server IP address
+          NAT    Network Address Translation
+          SF     Serverfarm
+          FT     Fault Tolerance
+          SSL    Secure Sockets Layer
+          TLS    Transport Layer Security                          
+          Server Farm    : Contains cluster of Real Server         
+          Real Server    : Real Servers are physical devices
+                           assigned to a server farm.
+                           Real  servers provide services that
+                           are load balanced.
+          Health Probe   : The mechanisms to monitor the health 
+                           of real servers or rservers.
+                  Virtual IP          : The IP through which the real server is 
+                                                     reached during load balancing.
+          Probe Instance : An instance of the probe identified by 
+                                             cslbxProbeName. A probe instance is created
+                                             for every probe association.
+                                             For example: When a probe is associated with
+                                             a real server a probe instance is created 
+                                             for that probe.                                                    
+          Probe Port     : This mechanism introduces the capability
+                  Inheritance      for the probe instance to inherit the 
+                                             virtual ip address port or the 
+                                             the real server port (identified by 
+                                             cshMonServerfarmRealServerPort) when the
+                                             probe port (identified by cslbxProbePort)
+                                             is not configured.
+                                             The precedence of inheritance is as follows
+                                             1. Probe's configured port
+                                             2. Real server port
+                                             3. Virtual ip address port
+                                             4. Probes default port identified by 
+                                             cslbxProbePort.
+                                             Examples:
+                                             Scenario 1:
+                                             Probe's configured port = 100
+                                             Real server port = 200
+                                             Virtual ip address port = 300
+                                             Probe's default port = 80
+                                             Inherited port of the probe instance = 100
+                                             Scenario 2:
+                                             Probe's configured port = not configured
+                                             Real server port = 200
+                                             Virtual ip address port = 300
+                                             Probe's default port = 80
+                                             Inherited port of the probe instance = 200
+                                             Scenario 3:
+                                             Probe's configured port = not configured
+                                             Real server port = not configured
+                                             Virtual ip address port = 300
+                                             Probe's default port = 80
+                                             Inherited port of the probe instance = 300
+                                             Scenario 4:
+                                             Probe's configured port = not configured
+                                             Real server port = not configured
+                                             Virtual ip address port = not configured
+                                             Probe's default port = 80
+                                             Inherited port of the probe instance = 80
+                                             Scenario 5:
+                                             There can be scenarios wherein there may
+                                             be multiple inherited ports for a probe 
+                                             instance.
+                                             There are configurations where multiple virtual 
+                                             ip addresses with different ports share the 
+                                             same probe instance and the probe has no 
+                                             configured port or real server port attached.
+                                             In that case the shared probe instance has 
+                                             multiple inherited ports. A typical scenario
+                                             might be
+                                             Probe's configured port = not configured
+                                             Real server port = not configured
+                                             Ports of the virtual ip addresses which
+                                             shares the probe instance = 300,400 
+                                             Probe's default port = 80
+                                             Inherited port of the probe instance = 
+                                             300,400"
+    REVISION        "200806260000Z"
+    DESCRIPTION
+        "-Added CiscoProbeInheritedPortType TEXTUAL-CONVENTION.
+
+        -Deprecated cshMonSfarmRealProbeStatsTable. 
+
+        -Added cshMonServerfarmRealProbeStatsTable.
+
+            -Added cshMonProbeTypeStatsTable.
+
+            -Added the following notifications
+            ciscoSlbHealthMonSocketOveruse
+            ciscoSlbHealthMonSocketNormaluse
+
+            -Added cshMonSocketOverusageCount notification object.
+
+            -Deprecated cshMonSfarmrealserverProbeStatsGroup OBJECT-GROUP.
+
+            -Deprecated ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE.
+
+            -Added the following OBJECT-GROUP's
+            cshMonSfarmrealserverProbeStatsGroupRev1
+            cshMonProbeTypeStatsGroup
+            cshMonNotifObjectsGroup
+
+            -Added cshMonNotifGroup NOTIFICATION-GROUP.
+
+            -Added ciscoSlbHealthMonMIBComplianceRev3 MODULE-COMPLIANCE."
+    REVISION        "200803110000Z"
+    DESCRIPTION
+        "- Added CiscoProbeHealthMonState TEXTUAL-CONVENTION.
+
+        - Added cslbxProbeState to the cslbxProbeCfgTable.
+
+        - Added cshMonSfarmRealProbeStatsTable. 
+
+        - Deprecated cslbHealthMonServerProbesGroup object group. 
+        - Deprecated ciscoSlbHealthMonMIBComplianceRev1 compliance 
+        statement. 
+
+        - Added cslbHealthMonServerProbesGroupRev1 OBJECT-GROUP.         
+
+        - Added ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE."
+    REVISION        "200611140000Z"
+    DESCRIPTION
+        "- Added following object in cslbxProbeHTTPCfgTable
+        cslbxProbeHTTPSslTlsVersionSupported.
+
+        - Added 'all' enum in cslbxProbeHTTPCfgSslTlsVersion 
+        object.
+
+        - Added 'rtspProbe' and 'snmpProbe' in SlbProbeType 
+          TEXTUAL CONVENTION
+
+        - Added following group
+        cslbHealthMonHTTPSProbesGroupRev1.
+
+        - Added following in Compliance/Conformance
+        ciscoSlbHealthMonMIBComplianceRev1."
+    REVISION        "200601180000Z"
+    DESCRIPTION
+        "Initial version of this MIB module.
+
+        SlbProbeType  : New enums(value 10-20) added.
+
+        - Following tables were originally defined in CISCO-SLB-EXT-MIB
+           cslbxProbeCfgTable
+           cslbxDnsProbeIpTable
+           cslbxProbeHeaderCfgTable
+           cslbxProbeExpectStatusCfgTable
+
+        - Added following objects in cslbxProbeCfgTable
+           cslbxProbeDescription 
+           cslbxProbeProtocolType
+           cslbxProbeRouteMethod
+           cslbxProbeUserName
+           cslbxProbePassword
+           cslbxProbePassCount
+           cslbxProbePriority
+           cslbxProbeConnTermination
+           cslbxProbeSocketReuse
+           cslbxProbeSendDataType
+           cslbxProbeSendData
+
+        - defined following tables 
+           cslbxProbeHTTPCfgTable
+           cslbxProbeSIPCfgTable
+           cslbxProbeFTPCfgTable
+           cslbxProbeTFTPCfgTable
+           cslbxProbeIMAPCfgTable
+
+        - Added UNITS clause for the following objects
+           cslbxProbeReceiveTimeout                  
+           cslbxProbeTcpOpenTimeout."
+    ::= { ciscoMgmt 508 }
+-- *************************************************************
+-- *                                                           *
+-- * SLB-EXT - Probe Configuration Table                       *
+-- *                                                           *
+-- *************************************************************
+
+cslbxProbeCfgTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxProbeCfgEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The probing function monitors the health of
+        real servers.  The SLB device actively probes
+        real servers to determine if they are healthy.  
+        This table is for configuring the parameters
+        of probes."
+    ::= { cslbxServerProbes 1 }
+
+cslbxProbeCfgEntry OBJECT-TYPE
+    SYNTAX          CslbxProbeCfgEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This entry provides the basic configuration of a
+        probe of a particular name, served by a particular
+        SLB entity. This entry may be of any probe type."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeName
+                    } 
+    ::= { cslbxProbeCfgTable 1 }
+
+CslbxProbeCfgEntry ::= SEQUENCE {
+        cslbxProbeName                  SlbServerString,
+        cslbxProbeType                  SlbProbeType,
+        cslbxProbeInterval              TimeInterval,
+        cslbxProbeRetries               Unsigned32,
+        cslbxProbeFailedInterval        TimeInterval,
+        cslbxProbeReceiveTimeout        TimeInterval,
+        cslbxProbeTcpOpenTimeout        TimeInterval,
+        cslbxProbeAlternateDestAddrType InetAddressType,
+        cslbxProbeAlternateDestAddr     InetAddress,
+        cslbxProbeDnsDomainName         SnmpAdminString,
+        cslbxProbeHttpRequestMethod     SnmpAdminString,
+        cslbxProbeHttpRequestUrl        SlbUrlString,
+        cslbxProbeRowStatus             RowStatus,
+        cslbxProbeScriptName            SlbFunctionNameString,
+        cslbxProbeScriptArguments       SnmpAdminString,
+        cslbxProbePort                  CiscoPort,
+        cslbxProbeDescription           SnmpAdminString,
+        cslbxProbeRouteMethod           INTEGER,
+        cslbxProbeProtocolType          INTEGER,
+        cslbxProbePassCount             Unsigned32,
+        cslbxProbePriority              Unsigned32,
+        cslbxProbeUserName              SnmpAdminString,
+        cslbxProbePassword              SnmpAdminString,
+        cslbxProbeConnTermination       INTEGER,
+        cslbxProbeSocketReuse           TruthValue,
+        cslbxProbeSendDataType          INTEGER,
+        cslbxProbeSendData              SnmpAdminString,
+        cslbxProbeState                 TruthValue
+}
+
+cslbxProbeName OBJECT-TYPE
+    SYNTAX          SlbServerString
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The name of the probe." 
+    ::= { cslbxProbeCfgEntry 1 }
+
+cslbxProbeType OBJECT-TYPE
+    SYNTAX          SlbProbeType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The type of probe." 
+    ::= { cslbxProbeCfgEntry 2 }
+
+cslbxProbeInterval OBJECT-TYPE
+    SYNTAX          TimeInterval
+    UNITS           "seconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "Time between health checks.  It is from the end of
+        previous check to the beginning of the next check."
+    DEFVAL          { 12000 } 
+    ::= { cslbxProbeCfgEntry 3 }
+
+cslbxProbeRetries OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The number of consecutive retries without a successful
+        probe before marking the real server as 'failed'."
+    DEFVAL          { 3 } 
+    ::= { cslbxProbeCfgEntry 4 }
+
+cslbxProbeFailedInterval OBJECT-TYPE
+    SYNTAX          TimeInterval
+    UNITS           "seconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "Time before retrying a 'failed' real
+        server to see if it has recovered yet."
+    DEFVAL          { 30000 } 
+    ::= { cslbxProbeCfgEntry 5 }
+
+cslbxProbeReceiveTimeout OBJECT-TYPE
+    SYNTAX          TimeInterval
+    UNITS           "seconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "Maximum time to wait for a reply from a real
+        server before considering this probe attempt
+        to have failed."
+    DEFVAL          { 1000 } 
+    ::= { cslbxProbeCfgEntry 6 }
+
+cslbxProbeTcpOpenTimeout OBJECT-TYPE
+    SYNTAX          TimeInterval
+    UNITS           "seconds"
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "Maximum time to wait for a TCP SYN/ACK frame
+        from the real server.  This entry is only valid
+        for probes employing TCP, such as SMTP and HTTP
+        probes."
+    DEFVAL          { 1000 } 
+    ::= { cslbxProbeCfgEntry 7 }
+
+cslbxProbeAlternateDestAddrType OBJECT-TYPE
+    SYNTAX          InetAddressType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The type of address stored in
+        cslbxProbeAlternateDestAddr."
+    DEFVAL          { ipv4 } 
+    ::= { cslbxProbeCfgEntry 8 }
+
+cslbxProbeAlternateDestAddr OBJECT-TYPE
+    SYNTAX          InetAddress (SIZE  (0..20))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The alternative destination IP address to be used with
+        the probing packet.  Probe frames are normally sent to
+        a real server IP address. If the setting is not
+        '0.0.0.0', probe frames are sent to the IP address
+        given by this object.  This entry is only valid with
+        the following probes(cslbxProbeType value):
+            icmpProbe, tcpProbe, dnsProbe,
+            httpProbe, ftpProbe, telnetProbe,
+            smtpProbe udpProbe, httpsProbe,
+            ldapProbe, popProbe, imapProbe,
+            radiusProbe, tacacsProbe, sipProbe,
+            tftpProbe, fingerProbe, echoProbe."
+    DEFVAL          { ''H } 
+    ::= { cslbxProbeCfgEntry 9 }
+
+cslbxProbeDnsDomainName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The domain name string use with the DNS probe. (Only
+        applicable to DNS probes.)" 
+    ::= { cslbxProbeCfgEntry 10 }
+
+cslbxProbeHttpRequestMethod OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..64))
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The request method type string to be used in the
+        HTTP probe packets. (Only applicable to HTTP
+        probes.)"
+    REFERENCE
+        "RFC 2616 Hypertext Transfer Protocol -- HTTP/1.1
+             Section 5.1.1."
+    DEFVAL          { "get" } 
+    ::= { cslbxProbeCfgEntry 11 }
+
+cslbxProbeHttpRequestUrl OBJECT-TYPE
+    SYNTAX          SlbUrlString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The URI string in the HTTP request of HTTP probe
+        packets. (Only applicable to HTTP probes.)"
+    DEFVAL          { "" } 
+    ::= { cslbxProbeCfgEntry 12 }
+
+cslbxProbeRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The row status is used by a management station to
+        create or delete the row entry in cslbxProbeCfgTable
+        following the RowStatus textual convention." 
+    ::= { cslbxProbeCfgEntry 13 }
+
+cslbxProbeScriptName OBJECT-TYPE
+    SYNTAX          SlbFunctionNameString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The name of the function to be executed. (Only
+        applicable to scriptedProbe type.)"
+    DEFVAL          { ''H } 
+    ::= { cslbxProbeCfgEntry 14 }
+
+cslbxProbeScriptArguments OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The argument parameters passed into the executable
+        script. (Only applicable to scriptedProbe type.)"
+    DEFVAL          { ''H } 
+    ::= { cslbxProbeCfgEntry 15 }
+
+cslbxProbePort OBJECT-TYPE
+    SYNTAX          CiscoPort
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The port number to be used by the probe.  The value
+        of zero indicates the probe will use the default
+        port number. The default port number can be 0 or
+        the default port of that particular probe. This 
+        object is not applicable when cslbxProbeType is 
+        'icmpProbe'."
+    DEFVAL          { 0 } 
+    ::= { cslbxProbeCfgEntry 16 }
+
+cslbxProbeDescription OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object is used for configuring the
+        description of the probe."
+    DEFVAL          { "" } 
+    ::= { cslbxProbeCfgEntry 17 }
+
+cslbxProbeRouteMethod OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        other(1),
+                        transparent(2),
+                        routingTable(3)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object specifies whether the probe destined
+        to IP address specified in cslbxProbeAlternateDestAddr
+        be routed using internal routing table or forced to use
+        the known mac-address of the real-server/gateway that 
+        probe is associated with.
+
+        The value 'routingTable' specifies that address be 
+        routed using internal routing table.   
+
+        The value 'transparent' specifies that the 
+        probe destined to cslbxProbeAlternateDestAddr 
+        is routed using the ip address of the real server
+        or gateway this probe is associated with.
+
+        This object is applicable only if
+        cslbxProbeAlternateDestAddr is configured."
+    DEFVAL          { transparent } 
+    ::= { cslbxProbeCfgEntry 18 }
+
+cslbxProbeProtocolType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        other(1),
+                        tcp(2),
+                        udp(3)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object is used for configuring the
+        transport layer protocol to send 
+        probe messages. 
+
+        The possible value(s) are :
+         other: values other than mentioned below.
+                This value can not be written.
+         tcp  : TCP is used as transport
+                layer protocol.  
+         udp  : UDP is used as transport
+                layer protocol.  
+
+        This object can be set for the entries with
+        following values of cslbxProbeType:
+           sipProbe,
+           echoProbe
+
+        For other probes, this object can not be written
+        and the value of this object is based on the 
+        cslbxProbeType."
+    DEFVAL          { tcp } 
+    ::= { cslbxProbeCfgEntry 19 }
+
+cslbxProbePassCount OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object specifies the number of successful probe
+        responses that should be received before declaring
+        a failed real server as pass. This object is used in
+        conjunction with 'cslbxProbeFailedInterval'." 
+    ::= { cslbxProbeCfgEntry 20 }
+
+cslbxProbePriority OBJECT-TYPE
+    SYNTAX          Unsigned32 (0..255 )
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object represents the probe priority.
+        The priority value is in the decreasing order
+        of the actual priority, i.e., lower the value
+        higher the priority.
+        Probes associated with critical services can be
+        configured with highest priority such that the
+        results of these probes can be used to trigger
+        a state change in configuration."
+    DEFVAL          { 2 } 
+    ::= { cslbxProbeCfgEntry 21 }
+
+cslbxProbeUserName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object represents the user name required for
+        authentication.  This object is applicable for 
+        following value of 'cslbxProbeType' :
+            httpprobe, httpsProbe
+            telnetProbe, ftpProbe, ldapProbe,
+            imapProbe, popProbe, 
+            radiusProbe, tacacsProbe." 
+    ::= { cslbxProbeCfgEntry 22 }
+
+cslbxProbePassword OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object represents the password required for
+        authentication. This object is applicable for following
+        value of 'cslbxProbeType' :
+            httpprobe, httpsProbe
+            telnetProbe, ftpProbe, ldapProbe,
+            imapProbe, popProbe, 
+            radiusProbe, tacacsProbe.
+        This object returns zero length octet string when read." 
+    ::= { cslbxProbeCfgEntry 23 }
+
+cslbxProbeConnTermination OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        graceful(1),
+                        forced(2)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object specifies how the connections need to
+        be terminated.  The possible value(s) are :
+        graceful  : follow graceful handshake for 
+                    terminating connections.
+        forced    : send RST to terminate connections.
+
+        This object is applicable only for TCP based probes."
+    DEFVAL          { forced } 
+    ::= { cslbxProbeCfgEntry 24 }
+
+cslbxProbeSocketReuse OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object specifies whether to reuse the socket or not
+        for the connection oriented probes. If set to 'true'
+        same socket is re-used for multiple probes.
+        If set to 'false' new socket will be created.
+
+        This object is applicable only for TCP based probes." 
+    ::= { cslbxProbeCfgEntry 25 }
+
+cslbxProbeSendDataType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        ascii(1),
+                        binary(2)
+                    }
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object represents the data to be sent
+        for the appropriate probes.
+
+        The possible value(s) are:
+         ascii  : ASCII data
+         binary : binary data.
+
+        This object is used in conjunction with object
+        'cslbxProbeSendData'."
+    DEFVAL          { ascii } 
+    ::= { cslbxProbeCfgEntry 26 }
+
+cslbxProbeSendData OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "This object represents the data to be sent
+        for the appropriate probes. This object
+        is applicable for following value(s) of 
+        cslbxProbeType :
+         echoProbe
+         fingerProbe
+         sipProbe 
+         tcpProbe 
+         udpProbe." 
+    ::= { cslbxProbeCfgEntry 27 }
+
+cslbxProbeState OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object represents the state of the probe.
+        When the probe is associated with a real server or server 
+        farm it will be active which is represented by 
+        value 'true'. When the probe is active and if the 
+        real server is administratively put into in-service, then 
+        the real server health monitoring will be started.         
+        When the probe is not associated with a real 
+        server or server farm it will be inactive which is represented 
+        by value 'false', so no health monitoring will be 
+        performed."
+    DEFVAL          { false } 
+    ::= { cslbxProbeCfgEntry 28 }
+ 
+
+-- *************************************************************
+-- *                                                           *
+-- * SLB-EXT - DNS Probe Expected IP Configuration Table       *
+-- *                                                           *
+-- *************************************************************
+
+cslbxDnsProbeIpTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxDnsProbeIpEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The probing function monitors the health of
+        real servers.  The SLB device actively probes
+        real servers to determine if they are healthy.  
+        This table is for configuring the parameters
+        of DNS probes. In a DNS probe, resolution of a
+        specific domain name is requested, and the
+        resulting IP address must match one of a list of
+        'expected IP addresses' configured for that
+        probe. This table stores the list of expected IP
+        addresses for each DNS probe."
+    ::= { cslbxServerProbes 2 }
+
+cslbxDnsProbeIpEntry OBJECT-TYPE
+    SYNTAX          CslbxDnsProbeIpEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The IP address in this entry is a valid response
+        to a request for resolution of the domain name
+        associated with the DNS probe in this entry."
+    INDEX           {
+                        slbEntity,
+                        cslbxDnsProbeIpProbeName,
+                        cslbxDnsProbeIpAddressType,
+                        cslbxDnsProbeIpAddress
+                    } 
+    ::= { cslbxDnsProbeIpTable 1 }
+
+CslbxDnsProbeIpEntry ::= SEQUENCE {
+        cslbxDnsProbeIpProbeName   SlbServerString,
+        cslbxDnsProbeIpAddressType InetAddressType,
+        cslbxDnsProbeIpAddress     InetAddress,
+        cslbxDnsProbeIpRowStatus   RowStatus
+}
+
+cslbxDnsProbeIpProbeName OBJECT-TYPE
+    SYNTAX          SlbServerString
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The name of the DNS probe." 
+    ::= { cslbxDnsProbeIpEntry 1 }
+
+cslbxDnsProbeIpAddressType OBJECT-TYPE
+    SYNTAX          InetAddressType
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The type of address stored in
+        cslbxDnsProbeIpAddress." 
+    ::= { cslbxDnsProbeIpEntry 2 }
+
+cslbxDnsProbeIpAddress OBJECT-TYPE
+    SYNTAX          InetAddress (SIZE  (1..20))
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The IP address that may be expected in response
+        to a DNS probe from a 'healthy' real DNS server." 
+    ::= { cslbxDnsProbeIpEntry 3 }
+
+cslbxDnsProbeIpRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The object used by a management station to create
+        or delete the row entry in cslbxDnsProbeIpTable
+        following the RowStatus textual convention." 
+    ::= { cslbxDnsProbeIpEntry 4 }
+ 
+
+-- *************************************************************
+-- *                                                           *
+-- * SLB-EXT - HTTP Probe Header Table                         *
+-- *                                                           *
+-- *************************************************************
+
+cslbxProbeHeaderCfgTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxProbeHeaderCfgEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The probing function monitors the health of
+        real servers.  The SLB device actively probes
+        real servers to determine if they are healthy.  
+        This table is for configuring the parameters
+        of HTTP probes. In particular, each HTTP probe
+        request may be sent with a number of fixed HTTP
+        headers. This table defines such fixed HTTP
+        headers sent with HTTP probes."
+    ::= { cslbxServerProbes 3 }
+
+cslbxProbeHeaderCfgEntry OBJECT-TYPE
+    SYNTAX          CslbxProbeHeaderCfgEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This entry defines the HTTP header value
+        of a particular HTTP header name sent with a
+        particular HTTP probe, served by a particular SLB
+        entity."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeHeaderProbeName,
+                        cslbxProbeHeaderFieldName
+                    } 
+    ::= { cslbxProbeHeaderCfgTable 1 }
+
+CslbxProbeHeaderCfgEntry ::= SEQUENCE {
+        cslbxProbeHeaderProbeName  SlbServerString,
+        cslbxProbeHeaderFieldName  SnmpAdminString,
+        cslbxProbeHeaderFieldValue SnmpAdminString,
+        cslbxProbeHeaderRowStatus  RowStatus
+}
+
+cslbxProbeHeaderProbeName OBJECT-TYPE
+    SYNTAX          SlbServerString
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The name of the HTTP probe." 
+    ::= { cslbxProbeHeaderCfgEntry 1 }
+
+cslbxProbeHeaderFieldName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (1..64))
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An HTTP header of this name is transmitted in the
+        HTTP request sent by this probe." 
+    ::= { cslbxProbeHeaderCfgEntry 2 }
+
+cslbxProbeHeaderFieldValue OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The HTTP header value associated with the HTTP header
+        name given by cslbxProbeHeaderFieldName." 
+    ::= { cslbxProbeHeaderCfgEntry 3 }
+
+cslbxProbeHeaderRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The object used by a management station to create
+        or delete the row entry in cslbxProbeHeaderTable
+        following the RowStatus textual convention." 
+    ::= { cslbxProbeHeaderCfgEntry 4 }
+ 
+
+-- *************************************************************
+-- *                                                           *
+-- * SLB-EXT - Probe Expect Status Codes Configuration Table   *
+-- *                                                           *
+-- *************************************************************
+
+cslbxProbeExpectStatusCfgTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxProbeExpectStatusCfgEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The probing function monitors the health of
+        real servers.  The SLB device actively probes
+        real servers to determine if they are healthy.  
+        This table is for configuring the expect status
+        codes returned by a server."
+    ::= { cslbxServerProbes 4 }
+
+cslbxProbeExpectStatusCfgEntry OBJECT-TYPE
+    SYNTAX          CslbxProbeExpectStatusCfgEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This entry provides the configuration of a range of
+        expect status codes for a particular probe, served by
+        a particular SLB entity."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeExpectStatusProbeName,
+                        cslbxProbeExpectStatusMinValue
+                    } 
+    ::= { cslbxProbeExpectStatusCfgTable 1 }
+
+CslbxProbeExpectStatusCfgEntry ::= SEQUENCE {
+        cslbxProbeExpectStatusProbeName SlbServerString,
+        cslbxProbeExpectStatusMinValue  Unsigned32,
+        cslbxProbeExpectStatusMaxValue  Unsigned32,
+        cslbxProbeExpectStatusRowStatus RowStatus
+}
+
+cslbxProbeExpectStatusProbeName OBJECT-TYPE
+    SYNTAX          SlbServerString
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The name of the probe." 
+    ::= { cslbxProbeExpectStatusCfgEntry 1 }
+
+cslbxProbeExpectStatusMinValue OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The starting value of the expect status code range." 
+    ::= { cslbxProbeExpectStatusCfgEntry 2 }
+
+cslbxProbeExpectStatusMaxValue OBJECT-TYPE
+    SYNTAX          Unsigned32
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The ending value of the expect status code range." 
+    ::= { cslbxProbeExpectStatusCfgEntry 3 }
+
+cslbxProbeExpectStatusRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+        "The object used by a management station to create
+        or delete the row entry in 
+        cslbxProbeExpectStatusCfgTable following the 
+        RowStatus textual convention." 
+    ::= { cslbxProbeExpectStatusCfgEntry 4 }
+ 
+
+-- *************************************************************
+-- *                                                           *
+-- * HTTP/HTTPS Probe Table                                    *
+-- *                                                           *
+-- *************************************************************
+
+cslbxProbeHTTPCfgTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxProbeHTTPCfgEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table is for configuring attributes
+        applicable to HTTP and HTTPS probes.  
+
+        This table supports configuration of the probe 
+        attributes in addition to the HTTP attributes 
+        configured in cslbxProbeCfgTable.
+
+        Following objects from cslbxProbeCfgTable are applicable 
+        to HTTP/HTTPS probe:
+            cslbxProbeAlternateDestAddrType
+            cslbxProbeAlternateDestAddr
+            cslbxProbeRouteMethod   
+            cslbxProbeHttpRequestMethod
+            cslbxProbeHttpRequestUrl
+            cslbxProbePort
+            cslbxProbeUserName
+            cslbxProbePassword
+            cslbxProbeInterval
+            cslbxProbeRetries
+            cslbxProbeFailedInterval
+            cslbxProbeReceiveTimeout
+            cslbxProbeTcpOpenTimeout
+            cslbxProbeConnTermination
+            cslbxProbePriority
+            cslbxProbePassCount
+
+        An HTTP probe establishes an HTTP connection to
+        a real server and then sends an HTTP request
+        and verifies the response.
+
+        This table is applicable only for the instance
+        value of cslbxProbeType 'httpProbe' or 'httpsProbe'."
+    ::= { cslbxServerProbes 5 }
+
+cslbxProbeHTTPCfgEntry OBJECT-TYPE
+    SYNTAX          CslbxProbeHTTPCfgEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry in HTTP Probe configuration table.
+
+        An entry is created in the table when 
+        an entry is created in cslbxProbeCfgTable 
+        with cslbxProbeType 'httpProbe' or
+        'httpsProbe'.
+
+        An entry is deleted from this table when
+        corresponding entry (identified  by the indices)
+        is deleted from cslbxProbeCfgTable.
+
+        Following objects are applicable to both
+        HTTP and HTTPS Probes:
+            cslbxProbeHTTPCfgVersion 
+            cslbxProbeHTTPCfgPersistence
+            cslbxProbeHTTPCfgHashValid
+            cslbxProbeHTTPCfgHashName
+
+        Following objects are applicable only for
+        HTTPS Probes:
+            cslbxProbeHTTPCfgCipherSuite
+            cslbxProbeHTTPCfgSslTlsVersion
+            cslbxProbeHTTPCfgSslSessionReuse.
+        The 'cslbxProbeName' refers to the probe which 
+        is created by adding an entry in 
+        'cslbxProbeCfgTable' with cslbxProbeType
+        'httpProbe' or 'httpsProbe'."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeName
+                    } 
+    ::= { cslbxProbeHTTPCfgTable 1 }
+
+CslbxProbeHTTPCfgEntry ::= SEQUENCE {
+        cslbxProbeHTTPCfgVersion             INTEGER,
+        cslbxProbeHTTPCfgPersistence         TruthValue,
+        cslbxProbeHTTPCfgHashValid           TruthValue,
+        cslbxProbeHTTPCfgHashName            SnmpAdminString,
+        cslbxProbeHTTPCfgCipherSuite         INTEGER,
+        cslbxProbeHTTPCfgSslTlsVersion       INTEGER,
+        cslbxProbeHTTPCfgSslSessionReuse     TruthValue,
+        cslbxProbeHTTPSslTlsVersionSupported BITS
+}
+
+cslbxProbeHTTPCfgVersion OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        httpOneDotZero(1),
+                        httpOneDotOne(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object represents HTTP version for the probe.
+        The 'htpOneDotZero' specifies HTTP 1.0 protocol.
+        The 'htpOneDotOne' specifies HTTP 1.1 protocol."
+    REFERENCE
+        "RFC 1945 - Hypertext Transfer Protocol -  HTTP/1.0
+         RFC 2616 - Hypertext Transfer Protocol -  HTTP/1.1."
+    DEFVAL          { httpOneDotOne } 
+    ::= { cslbxProbeHTTPCfgEntry 1 }
+
+cslbxProbeHTTPCfgPersistence OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object enables/disables persistence for
+        HTTP(for both  1.0 and 1.1) probes. 
+
+        The pure HTTP/1.0 requires that a seperate
+        TCP connection to be opened for each downloaded
+        object.  The persistence allows TCP connections
+        to be re-used while requesting multiple objects
+        without incurring a overhead of opening a new 
+        TCP connection."
+    DEFVAL          { false } 
+    ::= { cslbxProbeHTTPCfgEntry 2 }
+
+cslbxProbeHTTPCfgHashValid OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object enables the hash functionality.
+        If set to 'true', the cslbxProbeHTTPCfgHashName 
+        is used.  If set 'false' the value
+        specified in cslbxProbeHTTPCfgHashName
+        is not used."
+    DEFVAL          { false } 
+    ::= { cslbxProbeHTTPCfgEntry 3 }
+
+cslbxProbeHTTPCfgHashName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object specifies the hash value
+        for the probe." 
+    ::= { cslbxProbeHTTPCfgEntry 4 }
+
+cslbxProbeHTTPCfgCipherSuite OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        rsaOther(1),
+                        rsaAny(2),
+                        rsaWithRc4128Md5(3),
+                        rsaWithRc4128Sha(4),
+                        rsaWithdesCbcSha(5),
+                        rsaWith3desEdeCbcSha(6),
+                        rsaExportWithRc440Md5(7),
+                        rsaExportWithDes40CbcSha(8),
+                        rsaExport1024WithRc456Md5(9),
+                        rsaExport1024WithDesCbcSha(10),
+                        rsaExport1024WithRc456Sha(11),
+                        rsaWithAes128CbcSha(12),
+                        rsaWithAes256cbcSha(13)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object represents SSL Cipher suites to be
+        used for HTTPS probes.
+
+        The value 'rsa_any' is used for selecting a
+        random cipher.
+
+        The value 'rsaOther' specifies value other than
+        those defined in the object.  This value can not
+        be written."
+    REFERENCE       "RFC 2246 - TLS Protocol version 1.0."
+    DEFVAL          { rsaOther } 
+    ::= { cslbxProbeHTTPCfgEntry 5 }
+
+cslbxProbeHTTPCfgSslTlsVersion OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        other(1),
+                        sslv2(2),
+                        sslv3(3),
+                        tlsv1(4),
+                        all(5)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object represents the version of
+        the SSL/TLS protocol.
+
+        The possible value(s) are :
+            other         : Version not applicable.
+                            This value can not be set by the user.
+            sslv2         : SSL Version 2.0.
+            sslv3         : SSL Version 3.0.
+            tlsv1         : TLS Version 1.0.
+            all           : All supported versions as reported in 
+                            cslbxProbeHTTPSslTlsVersionSupported 
+                            object."
+    REFERENCE       "RFC 2246 -  The TLS Protocol Version 1.0."
+    DEFVAL          { sslv3 } 
+    ::= { cslbxProbeHTTPCfgEntry 6 }
+
+cslbxProbeHTTPCfgSslSessionReuse OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object enables/disables reusing of the SSL
+        Session ID. If set to 'true', SSL session ID will
+        be reused. If set to 'false', SSL session ID will
+        not be reused.  In SSL, a new session ID is created 
+        every time the client and the SSL module go through a
+        full key exchange and establish a new master secret key. 
+        Enabling this object allows the SSL module to reuse the 
+        master key on subsequent connections with the client, 
+        which can speed up the SSL negotiation process." 
+    ::= { cslbxProbeHTTPCfgEntry 7 }
+
+cslbxProbeHTTPSslTlsVersionSupported OBJECT-TYPE
+    SYNTAX          BITS {
+                        sslv3(0),
+                        tlsv1(1)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the supported SSL/TLS versions.
+        sslv3 - SSL version 3.0.
+        tlsv1 - TLS version 1.0." 
+    ::= { cslbxProbeHTTPCfgEntry 8 }
+ 
+
+-- *************************************************************
+-- *                                                           *
+-- * SIP Probe Table                                           *
+-- *                                                           *
+-- *************************************************************
+
+cslbxProbeSIPCfgTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxProbeSIPCfgEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table is for configuring attributes
+        applicable to SIP probes.  
+
+        The Session Initiation Protocol (SIP) is an ASCII-based,
+        application-layer control protocol that can be used to 
+        establish, maintain, and terminate calls between two 
+        or more endpoints. SIP is an alternative protocol 
+        developed by the Internet Engineering Task Force (IETF)
+        for multimedia conferencing over IP.
+
+        This table supports configuration of the probe 
+        attributes in addition to the attributes configured
+        in cslbxProbeCfgTable.
+
+        Following objects from cslbxProbeCfgTable are applicable 
+        to SIP probe:
+            cslbxProbeAlternateDestAddrType
+            cslbxProbeAlternateDestAddr
+            cslbxProbeRouteMethod   
+            cslbxProbePort
+            cslbxProbeUserName
+            cslbxProbePassword
+            cslbxProbeInterval
+            cslbxProbeRetries
+            cslbxProbeFailedInterval
+            cslbxProbeReceiveTimeout
+            cslbxProbeTcpOpenTimeout
+            cslbxProbeConnTermination
+            cslbxProbeSocketReuse
+            cslbxProbePassCount
+
+        This table is applicable only if the value of
+        cslbxProbeType is 'sipProbe'."
+    ::= { cslbxServerProbes 6 }
+
+cslbxProbeSIPCfgEntry OBJECT-TYPE
+    SYNTAX          CslbxProbeSIPCfgEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry in SIP Probe configuration table.
+
+        An entry is created in the table when 
+        an entry is created in cslbxProbeCfgTable 
+        with cslbxProbeType 'sipProbe'.
+
+        An entry is deleted from this table when
+        corresponding entry (identified  by the indices)
+        is deleted from cslbxProbeCfgTable.
+
+        The 'cslbxProbeName' refers to the probe which 
+        is created by adding an entry in 
+        'cslbxProbeCfgTable' with cslbxProbeType
+        'sipProbe'."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeName
+                    } 
+    ::= { cslbxProbeSIPCfgTable 1 }
+
+CslbxProbeSIPCfgEntry ::= SEQUENCE {
+        cslbxProbeSIPRegAddress SnmpAdminString
+}
+
+cslbxProbeSIPRegAddress OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (0..255))
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object represents the Registration address used
+        in SIP protocol.  Users in a SIP network are identified 
+        by unique SIP addresses.  A SIP address is similar to an 
+        e-mail address and is in the format of
+        'sip:userID@gateway.com'.  The userID can be either a
+        user name or an E.164 address.  An E.164 address is a
+        telephone number with a string of decimal digits that 
+        uniquely indicates the public network termination point.
+        The number contains the information necessary to route 
+        the call to this termination point."
+    DEFVAL          { "" } 
+    ::= { cslbxProbeSIPCfgEntry 1 }
+ 
+
+-- *************************************************************
+-- *                                                           *
+-- * FTP Probe Table                                           *
+-- *                                                           *
+-- *************************************************************
+
+cslbxProbeFTPCfgTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxProbeFTPCfgEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table is for configuring attributes
+        applicable to FTP probes.  This table supports
+        configuration of the probe attributes in addition
+        to the FTP attributes configured in cslbxProbeCfgTable.
+
+        Following objects from cslbxProbeCfgTable are applicable 
+        to FTP probe:
+            cslbxProbeAlternateDestAddrType
+            cslbxProbeAlternateDestAddr
+            cslbxProbeRouteMethod   
+            cslbxProbePort
+            cslbxProbeUserName
+            cslbxProbePassword
+            cslbxProbeInterval
+            cslbxProbeRetries
+            cslbxProbeFailedInterval
+            cslbxProbeReceiveTimeout
+            cslbxProbeTcpOpenTimeout
+            cslbxProbeConnTermination
+            cslbxProbeSocketReuse
+            cslbxProbePassCount
+
+        This table is applicable only if the value of
+        cslbxProbeType is 'ftpProbe'."
+    ::= { cslbxServerProbes 7 }
+
+cslbxProbeFTPCfgEntry OBJECT-TYPE
+    SYNTAX          CslbxProbeFTPCfgEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry in FTP Probe configuration table.
+        Each entry represents the FTP request,
+        File name and File type. 
+
+        An entry is created in the table when 
+        an entry is created in cslbxProbeCfgTable 
+        with cslbxProbeType 'ftpProbe'.
+
+        An entry is deleted from this table when
+        corresponding entry (identified  by the indices)
+        is deleted from cslbxProbeCfgTable.
+
+        The 'cslbxProbeName' refers to the probe which 
+        is created by adding an entry in 
+        'cslbxProbeCfgTable' with cslbxProbeType
+        'ftpProbe'."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeName
+                    } 
+    ::= { cslbxProbeFTPCfgTable 1 }
+
+CslbxProbeFTPCfgEntry ::= SEQUENCE {
+        cslbxProbeFtpRequestMethod   INTEGER,
+        cslbxProbeFtpRequestFileName SlbUrlString,
+        cslbxProbeFtpRequestFileType INTEGER
+}
+
+cslbxProbeFtpRequestMethod OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        other(1),
+                        ls(2),
+                        get(3),
+                        put(4)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the FTP request to be used
+        in FTP probe packets.
+        The possible value(s) are:
+            other : other than the values mentioned below.
+                    This value can not be written.
+            ls   : list files.
+            get  : Get request.
+            put  : Put request."
+    DEFVAL          { get } 
+    ::= { cslbxProbeFTPCfgEntry 1 }
+
+cslbxProbeFtpRequestFileName OBJECT-TYPE
+    SYNTAX          SlbUrlString
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The string representing the File Name
+        used in FTP Probe."
+    DEFVAL          { "" } 
+    ::= { cslbxProbeFTPCfgEntry 2 }
+
+cslbxProbeFtpRequestFileType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        ascii(1),
+                        binary(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object specifies the type
+        of the data transferred from/to
+        in case of FTP requests."
+    DEFVAL          { ascii } 
+    ::= { cslbxProbeFTPCfgEntry 3 }
+ 
+
+-- *************************************************************
+-- *                                                           *
+-- * TFTP Probe Table                                          *
+-- *                                                           *
+-- *************************************************************
+
+cslbxProbeTFTPCfgTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxProbeTFTPCfgEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table is for configuring attributes
+        applicable to TFTP probes.  This table supports
+        configuration of the probe attributes in addition
+        to the TFTP attributes configured in cslbxProbeCfgTable.
+
+        Following objects from cslbxProbeCfgTable are applicable 
+        to TFTP probe:
+            cslbxProbeAlternateDestAddrType
+            cslbxProbeAlternateDestAddr
+            cslbxProbePort
+            cslbxProbeInterval
+            cslbxProbeRetries
+            cslbxProbeFailedInterval
+            cslbxProbePassCount
+
+        This table is applicable only if the value of
+        cslbxProbeType is 'tftpProbe'."
+    ::= { cslbxServerProbes 8 }
+
+cslbxProbeTFTPCfgEntry OBJECT-TYPE
+    SYNTAX          CslbxProbeTFTPCfgEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry in TFTP Probe configuration table.
+        Each entry represents the TFTP probe related
+        parameters.
+
+        An entry is created in the table when 
+        an entry is created in cslbxProbeCfgTable 
+        with cslbxProbeType 'tftpProbe'.
+
+        An entry is deleted from this table when
+        correspnding entry (identified  by the indices)
+        is deleted from cslbxProbeCfgTable.
+
+        The 'cslbxProbeName' refers to the probe which 
+        is created by adding an entry in 
+        'cslbxProbeCfgTable' with cslbxProbeType
+        'tftpProbe'."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeName
+                    } 
+    ::= { cslbxProbeTFTPCfgTable 1 }
+
+CslbxProbeTFTPCfgEntry ::= SEQUENCE {
+        cslbxProbeTftpRequestMethod   INTEGER,
+        cslbxProbeTftpRequestFileName SlbUrlString,
+        cslbxProbeTftpRequestFileType INTEGER
+}
+
+cslbxProbeTftpRequestMethod OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        get(1),
+                        put(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the TFTP request to be used
+        in TFTP probe packets.
+        The possible value(s) are:
+            get  : Get request.
+            put  : Put request."
+    DEFVAL          { get } 
+    ::= { cslbxProbeTFTPCfgEntry 1 }
+
+cslbxProbeTftpRequestFileName OBJECT-TYPE
+    SYNTAX          SlbUrlString
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "The string representing the File Name
+        used in TFTP Probe."
+    DEFVAL          { "" } 
+    ::= { cslbxProbeTFTPCfgEntry 2 }
+
+cslbxProbeTftpRequestFileType OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        ascii(1),
+                        binary(2)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object specifies the type
+        of the data transferred from/to
+        in case of FTP requests."
+    DEFVAL          { ascii } 
+    ::= { cslbxProbeTFTPCfgEntry 3 }
+ 
+
+-- *************************************************************
+-- *                                                           *
+-- * IMAP Probe Table                                          *
+-- *                                                           *
+-- *************************************************************
+
+cslbxProbeIMAPCfgTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CslbxProbeIMAPCfgEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table is for configuring attributes
+        applicable to IMAP probe.
+
+        This table supports configuration of the probe 
+        attributes in addition to the IMAP attributes 
+        configured in cslbxProbeCfgTable.
+
+        Following objects from cslbxProbeCfgTable are applicable 
+        to IMAP probe:
+            cslbxProbeAlternateDestAddrType
+            cslbxProbeAlternateDestAddr
+            cslbxProbeRouteMethod   
+            cslbxProbePort
+            cslbxProbeUserName
+            cslbxProbePassword
+            cslbxProbeInterval
+            cslbxProbeRetries
+            cslbxProbeFailedInterval
+            cslbxProbeReceiveTimeout
+            cslbxProbeConnTermination
+            cslbxProbePriority
+            cslbxProbePassCount
+
+        An IMAP probe initiates a IMAP session and then 
+        attempts to retrieve e-mail from the server and 
+        verifies the response.
+
+        This table is applicable only if the value of
+        cslbxProbeType is 'imapProbe'."
+    ::= { cslbxServerProbes 9 }
+
+cslbxProbeIMAPCfgEntry OBJECT-TYPE
+    SYNTAX          CslbxProbeIMAPCfgEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry in IMAP Probe configuration table.
+        Each entry represents the IMAP probe related
+        parameters.
+
+        An entry is created in the table when 
+        an entry is created in cslbxProbeCfgTable 
+        with cslbxProbeType 'imapProbe'.
+
+        An entry is deleted from this table when
+        corresponding entry (identified  by the indices)
+        is deleted from cslbxProbeCfgTable.
+
+        The 'cslbxProbeName' refers to the probe which 
+        is created by adding an entry in 
+        'cslbxProbeCfgTable' with cslbxProbeType
+        'imapProbe'."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeName
+                    } 
+    ::= { cslbxProbeIMAPCfgTable 1 }
+
+CslbxProbeIMAPCfgEntry ::= SEQUENCE {
+        cslbxProbeIMAPMailBox    SnmpAdminString,
+        cslbxProbeIMAPMethodName SnmpAdminString
+}
+
+cslbxProbeIMAPMailBox OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object is used for configuring
+        the IMAP Mailbox value."
+    REFERENCE       "RFC 1730 Section 5.1 Mailbox Naming."
+    DEFVAL          { "" } 
+    ::= { cslbxProbeIMAPCfgEntry 1 }
+
+cslbxProbeIMAPMethodName OBJECT-TYPE
+    SYNTAX          SnmpAdminString
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object is used for configuring
+        the IMAP method.  The value can be
+        any IMAP method.  Some of the example(s) are:
+            FETCH, NOOP, STAT, RETR"
+    REFERENCE
+        "RFC 1730 Section 6.1 Client commands  - Any State.
+         RFC 1730 Section 6.4 Client commands  - Selected State."
+    DEFVAL          { "" } 
+    ::= { cslbxProbeIMAPCfgEntry 2 }
+ 
+
+
+
+ciscoSlbHealthMonMIBNotifs  OBJECT IDENTIFIER
+    ::= { ciscoSlbHealthMonMIB 0 }
+
+ciscoSlbHealthMonMIBObjects  OBJECT IDENTIFIER
+    ::= { ciscoSlbHealthMonMIB 1 }
+
+cshMonSfarmProbes  OBJECT IDENTIFIER
+    ::= { ciscoSlbHealthMonMIBObjects 1 }
+
+ciscoSlbHealthMonMIBConformance  OBJECT IDENTIFIER
+    ::= { ciscoSlbHealthMonMIB 2 }
+
+ciscoSlbHealthMonNotifObjects  OBJECT IDENTIFIER
+    ::= { ciscoSlbHealthMonMIBObjects 2 }
+
+-- Conformance Information
+
+ciscoSlbHealthMonMIBCompliances  OBJECT IDENTIFIER
+    ::= { ciscoSlbHealthMonMIBConformance 1 }
+
+ciscoSlbHealthMonMIBGroups  OBJECT IDENTIFIER
+    ::= { ciscoSlbHealthMonMIBConformance 2 }
+
+
+SlbProbeType ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The probe type for probing the health of a server.
+        'icmpProbe'     : Probe server by sending ICMP
+                          echo requests.
+        'tcpProbe'      : Probe server by opening TCP
+                          connections. TCP probe
+                          establishes and removes connections.
+        'dnsProbe'      : Probe server by sending DNS
+                          queries. A DNS probe sends a
+                          domain name resolve request to the 
+                          real server and verifies the returned 
+                          IP address.
+        'httpProbe'     : Probe server by sending HTTP
+                          requests. An HTTP probe establishes 
+                          and HTTP connection to a real server 
+                          and then sends an HTTP request and
+                          verifies the response.
+        'ftpProbe'      : Probe server by opening FTP
+                          connections. An FTP probe 
+                          establishes a connection to 
+                          the real server and verifies 
+                          that a greeting from the 
+                          application was received.
+        'telnetProbe'   : Probe server by opening Telnet
+                          connections. A Telnet probe 
+                          establishes a connection to the 
+                          real server and verifies that a 
+                          greeting from the application was 
+                          received.
+        'smtpProbe'     : Probe server by opening SMTP
+                          connections. An SMTP probe 
+                          establishes a connection to the 
+                          real server and verifies that a 
+                          greeting from the application was 
+                          received.
+        'scriptedProbe' : Probe server by executable
+                          script.
+        'undefined'     : New probe type not yet defined.
+        'udpProbe'      : Probe server by opening UDP ports.
+        'httpsProbe'    : Probe server by sending HTTPS
+                          requests.
+        'ldapProbe'     : Probe server by connecting to LDAP
+                          server.
+        'popProbe'      : Probe server by initiating 
+                          POP/POP3 session.
+        'imapProbe'     : Probe server by initiating 
+                          IMAP session.
+        'radiusProbe'   : Probe server by connecting to 
+                          RADIUS server.
+        'tacacsProbe'   : Probe server by connecting to 
+                          TACACS server.
+        'sipProbe'      : Probe server by sending SIP 
+                          Commands.
+        'tftpProbe'     : Probe server by sending tftp 
+                          requests.
+        'fingerProbe'   : Probe server by sending the 
+                          command and waiting for the 
+                          response.
+        'echoProbe'     : Probe server by sending the 
+                          data and response back.
+        'rtspProbe'     : Probe server by sending the 
+                           RTSP requests.
+        'snmpProbe'     : Probe server by sending the
+                           SNMP requests."
+    SYNTAX          INTEGER  {
+                        icmpProbe(1),
+                        tcpProbe(2),
+                        dnsProbe(3),
+                        httpProbe(4),
+                        ftpProbe(5),
+                        telnetProbe(6),
+                        smtpProbe(7),
+                        scriptedProbe(8),
+                        undefined(9),
+                        udpProbe(10),
+                        httpsProbe(11),
+                        ldapProbe(12),
+                        popProbe(13),
+                        imapProbe(14),
+                        radiusProbe(15),
+                        tacacsProbe(16),
+                        sipProbe(17),
+                        tftpProbe(18),
+                        fingerProbe(19),
+                        echoProbe(20),
+                        rtspProbe(21),
+                        snmpProbe(22)
+                    }
+
+CiscoProbeHealthMonState ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The health monitor state of the probe for a server.
+        The possible values are :
+        'other'                         :  The health monitor state of the probe
+                                        when none of the other values apply.
+        'invalid'        :  Server is not being monitored.
+                    Although user has tried to associate the 
+                    probe to the server, but due to some 
+                    internal problem it is actually not 
+                    associated.       
+        'init'           :  server is configured but not tested.
+        'active'         :  server is active. All expected 
+                    responses received.
+        'failed'         :  probe has failed as expected responses 
+                    have failed beyond acceptable limits.
+        'disabled'       :  probe disabled due to server 
+                    being outofservice or no valid 
+                    ip address configured to server."
+    SYNTAX          INTEGER  {
+                        other(1),
+                        invalid(2),
+                        init(3),
+                        active(4),
+                        failed(5),
+                        disabled(6)
+                    }
+
+CiscoProbeInheritedPortType ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "The type of the inheritance for the probe port.
+        The possible values are :
+        'other'                         : The inherited port when none of the other 
+                                           values apply.
+        'probe'                         : The inherited port is the probe's configured
+                                   port.
+        'real'                 : The inherited port is the port of the
+                                   real server to which the probe is associated.       
+        'vip'            : The inherited port is the port of the virtual
+                                   ip address.
+        'default'        : The inherited port is the probe's default
+                                   port."
+    SYNTAX          INTEGER  {
+                        other(1),
+                        probe(2),
+                        real(3),
+                        vip(4),
+                        default(5)
+                    }
+
+cshMonSfarmRealProbeStatsTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CshMonSfarmRealProbeStatsEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          deprecated
+    DESCRIPTION
+        "This table provides the statistics of a probe applied
+        to a real server. This will address probes configured 
+        under a serverfarm and also under a real server.
+        Deprecated because of the change in index requirement."
+    ::= { cshMonSfarmProbes 1 }
+
+cshMonSfarmRealProbeStatsEntry OBJECT-TYPE
+    SYNTAX          CshMonSfarmRealProbeStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          deprecated
+    DESCRIPTION
+        "Each entry provides the probe related
+        stats for a real server.  
+        In the following cases one or more entries get created:                    
+            1. An entry gets created when an entry is created in the 
+               cesRealServerProbeTable.
+            2. When an entry is created in
+               cslbxServerFarmProbeTable (identified by 
+               INDEX cslbxServerFarmProbeFarmName), then entries are 
+               created in this table with as many entries in 
+               cesServerFarmRserverTable (identified by 
+               INDEX slbServerFarmName) for the same server farm.
+            3. When an entry is created in 
+               cesServerFarmRserverTable (identified by INDEX 
+               slbServerFarmName), then entries are created in this 
+               table with as many entries in 
+               cslbxServerFarmProbeTable (identified by INDEX 
+               cslbxServerFarmProbeFarmName) for the same server farm.                           
+        In the following cases one or more entries get deleted:        
+            1. An entry gets deleted when an entry is deleted from the 
+               cesRealServerProbeTable.
+            2. When an entry is deleted from
+               cslbxServerFarmProbeTable (identified by 
+               INDEX cslbxServerFarmProbeFarmName), then entries are 
+               deleted from this table with as many entries in 
+               cesServerFarmRserverTable (identified by 
+               INDEX slbServerFarmName) for the same server farm.
+            3. When an entry is deleted from 
+               cesServerFarmRserverTable (identified by INDEX 
+               slbServerFarmName), then entries are deleted from this 
+               table with as many entries in 
+               cslbxServerFarmProbeTable (identified by INDEX 
+               cslbxServerFarmProbeFarmName) for the same server farm."
+    REFERENCE
+        "cesRealServerProbeTable and cesServerFarmRserverTable are 
+        defined in CISCO-ENHANCED-SLB-MIB. 
+        cslbxServerFarmProbeTable is defined in CISCO-SLB-EXT-MIB."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeName,
+                        slbServerFarmName,
+                        cshMonSfarmRealServerName,
+                        cshMonSfarmRealServerPort
+                    } 
+    ::= { cshMonSfarmRealProbeStatsTable 1 }
+
+CshMonSfarmRealProbeStatsEntry ::= SEQUENCE {
+        cshMonSfarmRealServerName          SnmpAdminString,
+        cshMonSfarmRealServerPort          InetPortNumber,
+        cshMonSfarmRealProbesPassed        Counter32,
+        cshMonSfarmRealProbesFailed        Counter32,
+        cshMonSfarmRealProbeHealthMonState CiscoProbeHealthMonState
+}
+
+cshMonSfarmRealServerName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (1..255))
+    MAX-ACCESS      not-accessible
+    STATUS          deprecated
+    DESCRIPTION
+        "This object identifies the name (unique identifier)
+        of the real server. This value must correspond to an entry 
+        in cesServerFarmRserverTable (identified by INDEX
+        cesRserverName) or cesRealServerProbeTable 
+        (identified by INDEX cesRserverName)."
+    REFERENCE
+        "cesServerFarmRserverTable and cesRealServerProbeTable 
+        are defined in CISCO-ENHANCED-SLB-MIB." 
+    ::= { cshMonSfarmRealProbeStatsEntry 1 }
+
+cshMonSfarmRealServerPort OBJECT-TYPE
+    SYNTAX          InetPortNumber
+    MAX-ACCESS      not-accessible
+    STATUS          deprecated
+    DESCRIPTION
+        "The port number of the real server.
+        The value zero specifies that 
+        port number is not used in conjunction
+        with real server IP Address. This value must correspond 
+        to an entry in cesServerFarmRserverTable (identified by INDEX
+        cesServerFarmRserverPort) or cesRealServerProbeTable 
+        (identified by INDEX cesServerFarmRserverPort)."
+    REFERENCE
+        "cesServerFarmRserverTable and cesRealServerProbeTable 
+        are defined in CISCO-ENHANCED-SLB-MIB." 
+    ::= { cshMonSfarmRealProbeStatsEntry 2 }
+
+cshMonSfarmRealProbesPassed OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          deprecated
+    DESCRIPTION
+        "The number of probes passed for this real
+        server. The probe is identified as pass if 
+        the real server returns a valid response." 
+    ::= { cshMonSfarmRealProbeStatsEntry 3 }
+
+cshMonSfarmRealProbesFailed OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          deprecated
+    DESCRIPTION
+        "The number of probes failed for this real
+        server. The probe is identified as failed 
+        if the real server fails to provide a valid 
+        response for a specified number of retries." 
+    ::= { cshMonSfarmRealProbeStatsEntry 4 }
+
+cshMonSfarmRealProbeHealthMonState OBJECT-TYPE
+    SYNTAX          CiscoProbeHealthMonState
+    MAX-ACCESS      read-only
+    STATUS          deprecated
+    DESCRIPTION
+        "The health monitor state of the probe for this
+        real server."
+    DEFVAL          { init } 
+    ::= { cshMonSfarmRealProbeStatsEntry 5 }
+ 
+
+
+cshMonProbeTypeStatsTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CshMonProbeTypeStatsEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table provides the accumulated statistics for each
+        probe type."
+    ::= { cshMonSfarmProbes 2 }
+
+cshMonProbeTypeStatsEntry OBJECT-TYPE
+    SYNTAX          CshMonProbeTypeStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "An entry in the cshMonProbeTypeStatsTable.
+        1. The entries in the table are created when the system 
+        boots up.
+        2. There is no use case where the entries gets deleted.
+        The 'slbEntity'is used in identifying the module in which 
+        configuration is applied. The 'cslbxProbeType' identifies the 
+        type of the probe."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeType
+                    } 
+    ::= { cshMonProbeTypeStatsTable 1 }
+
+CshMonProbeTypeStatsEntry ::= SEQUENCE {
+        cshMonProbeTotalSentProbes       Counter32,
+        cshMonProbeTotalPassedProbes     Counter32,
+        cshMonProbeTotalConnectionErrors Counter32,
+        cshMonProbeTotalReceivedRSTs     Counter32,
+        cshMonProbeTotalReceiveTimeouts  Counter32,
+        cshMonProbeTotalSendFailures     Counter32,
+        cshMonProbeTotalFailedProbes     Counter32,
+        cshMonProbeTotalRefusedConns     Counter32,
+        cshMonProbeTotalOpenTimeouts     Counter32,
+        cshMonProbeTotalActiveSockets    Counter32
+}
+
+cshMonProbeTotalSentProbes OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes sent to the
+        real servers." 
+    ::= { cshMonProbeTypeStatsEntry 1 }
+
+cshMonProbeTotalPassedProbes OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of passed probes. The probe
+        is identified as pass if the real server returns a valid 
+        response." 
+    ::= { cshMonProbeTypeStatsEntry 2 }
+
+cshMonProbeTotalConnectionErrors OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes that received
+        connection errors while trying to connect to the real server." 
+    ::= { cshMonProbeTypeStatsEntry 3 }
+
+cshMonProbeTotalReceivedRSTs OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes that received
+        TCP RST." 
+    ::= { cshMonProbeTypeStatsEntry 4 }
+
+cshMonProbeTotalReceiveTimeouts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes that suffered
+        receive timeouts." 
+    ::= { cshMonProbeTypeStatsEntry 5 }
+
+cshMonProbeTotalSendFailures OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes failed due to
+        internal errors. Internal errors are unexpected errors during
+        configuration, scheduling or processing a probe." 
+    ::= { cshMonProbeTypeStatsEntry 6 }
+
+cshMonProbeTotalFailedProbes OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of failed probes. The probe
+        is identified as failed if the real server fails to provide a
+        valid response for a specified number of retries." 
+    ::= { cshMonProbeTypeStatsEntry 7 }
+
+cshMonProbeTotalRefusedConns OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes whose connections
+        were refused by the real servers." 
+    ::= { cshMonProbeTypeStatsEntry 8 }
+
+cshMonProbeTotalOpenTimeouts OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes that received
+        timeout while trying to open a connection to the real server." 
+    ::= { cshMonProbeTypeStatsEntry 9 }
+
+cshMonProbeTotalActiveSockets OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes that are
+        currently using a socket in the system." 
+    ::= { cshMonProbeTypeStatsEntry 10 }
+ 
+
+
+cshMonServerfarmRealProbeStatsTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CshMonServerfarmRealProbeStatsEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This table provides the statistics of a probe applied
+        to a real server. This will address probes configured 
+        under a serverfarm and also under a real server."
+    ::= { cshMonSfarmProbes 3 }
+
+cshMonServerfarmRealProbeStatsEntry OBJECT-TYPE
+    SYNTAX          CshMonServerfarmRealProbeStatsEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Each entry provides the probe related stats for a real server.
+        Please refer to 'probe port inheritance' explained in this 
+        MODULE-IDENTITY description. 
+        In the following cases one or more entries get created:                    
+            1. When an entry is created in cesRealServerProbeTable,
+               then an equal number of entries are created in this 
+               table for each inherited port associated with each
+               probe instance.
+            2. When an entry is created in cslbxServerFarmProbeTable 
+               (identified by INDEX cslbxServerFarmProbeFarmName), then 
+               entries are created in this table with as many entries 
+               in cesServerFarmRserverTable (identified by INDEX 
+               slbServerFarmName) for the same server farm multiplied 
+               by the number of inherited ports associated with each
+               probe instance.
+            3. When an entry is created in cesServerFarmRserverTable
+               (identified by INDEX slbServerFarmName), then entries
+               are created in this table with as many entries in  
+               cslbxServerFarmProbeTable (identified by INDEX 
+               cslbxServerFarmProbeFarmName) for the same server farm
+               multiplied by the number of inherited ports associated
+               with each probe instance.                           
+        In the following cases one or more entries get deleted:        
+            1. When an entry gets deleted from the 
+               cesRealServerProbeTable, then an equal number of 
+               entries are deleted in this table for each inherited 
+               port associated with each probe instance.
+            2. When an entry is deleted from 
+               cslbxServerFarmProbeTable (identified by 
+               INDEX cslbxServerFarmProbeFarmName), then entries are 
+               deleted from this table with as many entries in 
+               cesServerFarmRserverTable (identified by 
+               INDEX slbServerFarmName) for the same server farm
+               multiplied by the number of inherited ports associated
+               with each probe instance.
+            3. When an entry is deleted from 
+               cesServerFarmRserverTable (identified by INDEX 
+               slbServerFarmName), then entries are deleted from this 
+               table with as many entries in 
+               cslbxServerFarmProbeTable (identified by INDEX 
+               cslbxServerFarmProbeFarmName) for the same server farm
+               multiplied by the number of inherited ports associated
+               with each probe instance."
+    REFERENCE
+        "cesRealServerProbeTable and cesServerFarmRserverTable are 
+        defined in CISCO-ENHANCED-SLB-MIB. 
+        cslbxServerFarmProbeTable is defined in CISCO-SLB-EXT-MIB."
+    INDEX           {
+                        slbEntity,
+                        cslbxProbeName,
+                        slbServerFarmName,
+                        cshMonServerfarmRealServerName,
+                        cshMonServerfarmRealServerPort,
+                        cshMonProbeInheritedPort
+                    } 
+    ::= { cshMonServerfarmRealProbeStatsTable 1 }
+
+CshMonServerfarmRealProbeStatsEntry ::= SEQUENCE {
+        cshMonServerfarmRealServerName          SnmpAdminString,
+        cshMonServerfarmRealServerPort          InetPortNumber,
+        cshMonProbeInheritedPort                InetPortNumber,
+        cshMonServerfarmRealPassedProbes        Counter32,
+        cshMonServerfarmRealFailedProbes        Counter32,
+        cshMonServerfarmRealProbeHealthMonState CiscoProbeHealthMonState,
+        cshMonServerfarmRealProbeLastProbeTime  DateAndTime,
+        cshMonServerfarmRealProbeLastActiveTime DateAndTime,
+        cshMonServerfarmRealProbeLastFailedTime DateAndTime,
+        cshMonProbeInheritedPortType            CiscoProbeInheritedPortType
+}
+
+cshMonServerfarmRealServerName OBJECT-TYPE
+    SYNTAX          SnmpAdminString (SIZE  (1..255))
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the name (unique identifier)
+        of the real server. This value must correspond to an entry 
+        in cesServerFarmRserverTable (identified by INDEX
+        cesRserverName) or cesRealServerProbeTable 
+        (identified by INDEX cesRserverName)."
+    REFERENCE
+        "cesServerFarmRserverTable and cesRealServerProbeTable 
+        are defined in CISCO-ENHANCED-SLB-MIB." 
+    ::= { cshMonServerfarmRealProbeStatsEntry 1 }
+
+cshMonServerfarmRealServerPort OBJECT-TYPE
+    SYNTAX          InetPortNumber
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the port number of the real server.
+        The value zero specifies that port number is not used in 
+        conjunction with real server ip address. This value must 
+        correspond to an entry in cesServerFarmRserverTable (identified 
+        by INDEX cesServerFarmRserverPort) or cesRealServerProbeTable 
+        (identified by INDEX cesServerFarmRserverPort)."
+    REFERENCE
+        "cesServerFarmRserverTable and cesRealServerProbeTable 
+        are defined in CISCO-ENHANCED-SLB-MIB." 
+    ::= { cshMonServerfarmRealProbeStatsEntry 2 }
+
+cshMonProbeInheritedPort OBJECT-TYPE
+    SYNTAX          InetPortNumber
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the port number which is inherited by
+        the probe instance. Please refer to probe port inheritance 
+        concept explained in this MODULE-IDENTITY description." 
+    ::= { cshMonServerfarmRealProbeStatsEntry 3 }
+
+cshMonServerfarmRealPassedProbes OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes passed for this
+        real server. The probe is identified as pass if the real 
+        server returns a valid response." 
+    ::= { cshMonServerfarmRealProbeStatsEntry 4 }
+
+cshMonServerfarmRealFailedProbes OBJECT-TYPE
+    SYNTAX          Counter32
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of probes failed for this
+        real server. The probe is identified as failed if the real 
+        server fails to provide a valid response for a specified 
+        number of retries." 
+    ::= { cshMonServerfarmRealProbeStatsEntry 5 }
+
+cshMonServerfarmRealProbeHealthMonState OBJECT-TYPE
+    SYNTAX          CiscoProbeHealthMonState
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the health monitor state of the probe
+        for this real server."
+    DEFVAL          { init } 
+    ::= { cshMonServerfarmRealProbeStatsEntry 6 }
+
+cshMonServerfarmRealProbeLastProbeTime OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indicates the date and time of the last probe." 
+    ::= { cshMonServerfarmRealProbeStatsEntry 7 }
+
+cshMonServerfarmRealProbeLastActiveTime OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indicates the last date and time that the probe's
+        state transitioned to 'active'." 
+    ::= { cshMonServerfarmRealProbeStatsEntry 8 }
+
+cshMonServerfarmRealProbeLastFailedTime OBJECT-TYPE
+    SYNTAX          DateAndTime
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indicates the last date and time that the probes's
+        state transitioned to 'failed'." 
+    ::= { cshMonServerfarmRealProbeStatsEntry 9 }
+
+cshMonProbeInheritedPortType OBJECT-TYPE
+    SYNTAX          CiscoProbeInheritedPortType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This object indentifies the type of the inherited port
+        for this probe instance."
+    DEFVAL          { default } 
+    ::= { cshMonServerfarmRealProbeStatsEntry 10 }
+ 
+
+
+-- Notification related objects
+
+cshMonSocketOverusageCount OBJECT-TYPE
+    SYNTAX          Gauge32
+    MAX-ACCESS      accessible-for-notify
+    STATUS          current
+    DESCRIPTION
+        "This object identifies the number of times the probes socket
+        usage exceeded 90% in that minute." 
+    ::= { ciscoSlbHealthMonNotifObjects 1 }
+
+-- Notifications
+
+cshMonSocketOveruse NOTIFICATION-TYPE
+    OBJECTS         { cshMonSocketOverusageCount }
+    STATUS          current
+    DESCRIPTION
+        "The notification is generated when probes socket usage
+        exceeds or equals 90% atleast 100 times in one minute.
+        The object cshMonSocketOverusageCount represents the number 
+        of times the probes socket usage exceeded 90 percentage 
+        in that minute."
+   ::= { ciscoSlbHealthMonMIBNotifs 1 }
+
+cshMonSocketNormalUse NOTIFICATION-TYPE
+    OBJECTS         { cshMonSocketOverusageCount }
+    STATUS          current
+    DESCRIPTION
+        "The notification is generated when the probes socket usage
+        becomes normal i.e the socket usage does not exceed 90% 100 or
+        more times in that minute and after cshMonSocketOveruse 
+        notification is generated.
+        The object cshMonSocketOverusageCount represents the number of
+        times the probes socket usage exceeded 90 percentage in that 
+        minute."
+   ::= { ciscoSlbHealthMonMIBNotifs 2 }
+
+ciscoSlbHealthMonMIBCompliance MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco SLB Health monitoring MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        cslbHealthMonServerProbesGroup,
+                        cslbHealthMonProbeCfgExtGroup
+                    }
+
+    GROUP           cslbHealthMonHTTPProbesCommmonGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support HTTP probes."
+
+    GROUP           cslbHealthMonHTTPSProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support HTTPS probes."
+
+    GROUP           cslbHealthMonSIPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support SIP probes."
+
+    GROUP           cslbHealthMonFTPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support FTP probes."
+
+    GROUP           cslbHealthMonTFTPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support TFTP probes."
+
+    GROUP           cslbHealthMonIMAPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support IMAP probes."
+
+    GROUP           cslbHealthMonProbeScriptGroup
+    DESCRIPTION
+        "This group is madatory for the systems
+        which support scripted probes."
+
+    OBJECT          cslbxProbeAlternateDestAddrType
+    DESCRIPTION
+        "An implementation is only required to support
+        IPv4 addresses."
+
+    OBJECT          cslbxProbeAlternateDestAddr
+    DESCRIPTION
+        "An implementation is only required to support
+        IPv4 addresses."
+    ::= { ciscoSlbHealthMonMIBCompliances 1 }
+
+ciscoSlbHealthMonMIBComplianceRev1 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco SLB Health monitoring MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        cslbHealthMonServerProbesGroup,
+                        cslbHealthMonProbeCfgExtGroup
+                    }
+
+    GROUP           cslbHealthMonHTTPProbesCommmonGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support HTTP probes."
+
+    GROUP           cslbHealthMonHTTPSProbesGroupRev1
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support HTTPS probes."
+
+    GROUP           cslbHealthMonSIPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support SIP probes."
+
+    GROUP           cslbHealthMonFTPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support FTP probes."
+
+    GROUP           cslbHealthMonTFTPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support TFTP probes."
+
+    GROUP           cslbHealthMonIMAPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support IMAP probes."
+
+    GROUP           cslbHealthMonProbeScriptGroup
+    DESCRIPTION
+        "This group is madatory for the systems
+        which support scripted probes."
+
+    OBJECT          cslbxProbeAlternateDestAddrType
+    DESCRIPTION
+        "An implementation is only required to support
+        IPv4 addresses."
+
+    OBJECT          cslbxProbeAlternateDestAddr
+    DESCRIPTION
+        "An implementation is only required to support
+        IPv4 addresses."
+    ::= { ciscoSlbHealthMonMIBCompliances 2 }
+
+ciscoSlbHealthMonMIBComplianceRev2 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco SLB Health monitoring MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        cslbHealthMonServerProbesGroupRev1,
+                        cslbHealthMonProbeCfgExtGroup,
+                        cshMonSfarmrealserverProbeStatsGroup
+                    }
+
+    GROUP           cslbHealthMonHTTPProbesCommmonGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support HTTP probes."
+
+    GROUP           cslbHealthMonHTTPSProbesGroupRev1
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support HTTPS probes."
+
+    GROUP           cslbHealthMonSIPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support SIP probes."
+
+    GROUP           cslbHealthMonFTPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support FTP probes."
+
+    GROUP           cslbHealthMonTFTPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support TFTP probes."
+
+    GROUP           cslbHealthMonIMAPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support IMAP probes."
+
+    GROUP           cslbHealthMonProbeScriptGroup
+    DESCRIPTION
+        "This group is madatory for the systems
+        which support scripted probes."
+
+    OBJECT          cslbxProbeAlternateDestAddrType
+    DESCRIPTION
+        "An implementation is only required to support
+        IPv4 addresses."
+
+    OBJECT          cslbxProbeAlternateDestAddr
+    DESCRIPTION
+        "An implementation is only required to support
+        IPv4 addresses."
+    ::= { ciscoSlbHealthMonMIBCompliances 3 }
+
+ciscoSlbHealthMonMIBComplianceRev3 MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the Cisco SLB Health monitoring MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS {
+                        cslbHealthMonServerProbesGroupRev1,
+                        cslbHealthMonProbeCfgExtGroup,
+                        cshMonSfarmrealserverProbeStatsGroupRev1,
+                        cshMonProbeTypeStatsGroup
+                    }
+
+    GROUP           cslbHealthMonHTTPProbesCommmonGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support HTTP probes."
+
+    GROUP           cslbHealthMonHTTPSProbesGroupRev1
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support HTTPS probes."
+
+    GROUP           cslbHealthMonSIPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support SIP probes."
+
+    GROUP           cslbHealthMonFTPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support FTP probes."
+
+    GROUP           cslbHealthMonTFTPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support TFTP probes."
+
+    GROUP           cslbHealthMonIMAPProbesGroup
+    DESCRIPTION
+        "This group is mandatory for the systems
+        which support IMAP probes."
+
+    GROUP           cslbHealthMonProbeScriptGroup
+    DESCRIPTION
+        "This group is madatory for the systems
+        which support scripted probes."
+
+    GROUP           cshMonNotifObjectsGroup
+    DESCRIPTION
+        "This group is madatory for the systems
+        which supports socket usage notification."
+
+    GROUP           cshMonNotifGroup
+    DESCRIPTION
+        "This group is madatory for the systems
+        which supports socket usage notification."
+
+    OBJECT          cslbxProbeAlternateDestAddrType
+    DESCRIPTION
+        "An implementation is only required to support
+        IPv4 addresses."
+
+    OBJECT          cslbxProbeAlternateDestAddr
+    DESCRIPTION
+        "An implementation is only required to support
+        IPv4 addresses."
+    ::= { ciscoSlbHealthMonMIBCompliances 4 }
+
+cslbHealthMonServerProbesGroup OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeType,
+                        cslbxProbeInterval,
+                        cslbxProbeRetries,
+                        cslbxProbeFailedInterval,
+                        cslbxProbeReceiveTimeout,
+                        cslbxProbeTcpOpenTimeout,
+                        cslbxProbeAlternateDestAddrType,
+                        cslbxProbeAlternateDestAddr,
+                        cslbxProbeDnsDomainName,
+                        cslbxProbeRowStatus,
+                        cslbxDnsProbeIpRowStatus,
+                        cslbxProbeExpectStatusMaxValue,
+                        cslbxProbeExpectStatusRowStatus,
+                        cslbxProbePort,
+                        cslbxProbeDescription,
+                        cslbxProbeProtocolType,
+                        cslbxProbeRouteMethod,
+                        cslbxProbePriority
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "The second revision of the collection of SLB server
+        health probe objects."
+    ::= { ciscoSlbHealthMonMIBGroups 1 }
+
+cslbHealthMonProbeCfgExtGroup OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeUserName,
+                        cslbxProbePassword,
+                        cslbxProbePassCount,
+                        cslbxProbeConnTermination,
+                        cslbxProbeSocketReuse,
+                        cslbxProbeSendDataType,
+                        cslbxProbeSendData
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The collection of objects to configure
+        probes in an SLB device."
+    ::= { ciscoSlbHealthMonMIBGroups 2 }
+
+cslbHealthMonSIPProbesGroup OBJECT-GROUP
+    OBJECTS         { cslbxProbeSIPRegAddress }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information
+        specific to SIP Probes."
+    ::= { ciscoSlbHealthMonMIBGroups 3 }
+
+cslbHealthMonFTPProbesGroup OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeFtpRequestMethod,
+                        cslbxProbeFtpRequestFileName,
+                        cslbxProbeFtpRequestFileType
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information
+        specific to FTP Probes."
+    ::= { ciscoSlbHealthMonMIBGroups 4 }
+
+cslbHealthMonHTTPProbesCommmonGroup OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeHttpRequestMethod,
+                        cslbxProbeHttpRequestUrl,
+                        cslbxProbeHeaderFieldValue,
+                        cslbxProbeHeaderRowStatus,
+                        cslbxProbeHTTPCfgVersion,
+                        cslbxProbeHTTPCfgPersistence,
+                        cslbxProbeHTTPCfgHashValid,
+                        cslbxProbeHTTPCfgHashName
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information
+        specific to both HTTP and HTTPS Probes."
+    ::= { ciscoSlbHealthMonMIBGroups 5 }
+
+cslbHealthMonHTTPSProbesGroup OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeHTTPCfgCipherSuite,
+                        cslbxProbeHTTPCfgSslTlsVersion,
+                        cslbxProbeHTTPCfgSslSessionReuse
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects providing information
+        specific to HTTPS Probes."
+    ::= { ciscoSlbHealthMonMIBGroups 6 }
+
+cslbHealthMonTFTPProbesGroup OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeTftpRequestMethod,
+                        cslbxProbeTftpRequestFileName,
+                        cslbxProbeTftpRequestFileType
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information
+        specific to TFTP Probes."
+    ::= { ciscoSlbHealthMonMIBGroups 7 }
+
+cslbHealthMonIMAPProbesGroup OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeIMAPMailBox,
+                        cslbxProbeIMAPMethodName
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information
+        specific to IMAP Probes."
+    ::= { ciscoSlbHealthMonMIBGroups 8 }
+
+cslbHealthMonProbeScriptGroup OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeScriptName,
+                        cslbxProbeScriptArguments
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The collection of objects to configure scripted
+        probes in an SLB device."
+    ::= { ciscoSlbHealthMonMIBGroups 9 }
+
+cslbHealthMonHTTPSProbesGroupRev1 OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeHTTPCfgCipherSuite,
+                        cslbxProbeHTTPCfgSslTlsVersion,
+                        cslbxProbeHTTPCfgSslSessionReuse,
+                        cslbxProbeHTTPSslTlsVersionSupported
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing information
+        specific to HTTPS Probes."
+    ::= { ciscoSlbHealthMonMIBGroups 10 }
+
+cslbHealthMonServerProbesGroupRev1 OBJECT-GROUP
+    OBJECTS         {
+                        cslbxProbeType,
+                        cslbxProbeInterval,
+                        cslbxProbeRetries,
+                        cslbxProbeFailedInterval,
+                        cslbxProbeReceiveTimeout,
+                        cslbxProbeTcpOpenTimeout,
+                        cslbxProbeAlternateDestAddrType,
+                        cslbxProbeAlternateDestAddr,
+                        cslbxProbeDnsDomainName,
+                        cslbxProbeRowStatus,
+                        cslbxDnsProbeIpRowStatus,
+                        cslbxProbeExpectStatusMaxValue,
+                        cslbxProbeExpectStatusRowStatus,
+                        cslbxProbePort,
+                        cslbxProbeDescription,
+                        cslbxProbeProtocolType,
+                        cslbxProbeRouteMethod,
+                        cslbxProbePriority,
+                        cslbxProbeState
+                    }
+    STATUS          current
+    DESCRIPTION
+        "The third revision of the collection of SLB server
+        health probe objects."
+    ::= { ciscoSlbHealthMonMIBGroups 11 }
+
+cshMonSfarmrealserverProbeStatsGroup OBJECT-GROUP
+    OBJECTS         {
+                        cshMonSfarmRealProbesPassed,
+                        cshMonSfarmRealProbesFailed,
+                        cshMonSfarmRealProbeHealthMonState
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "Group of objects providing statistics of a probe applied
+        to a real server."
+    ::= { ciscoSlbHealthMonMIBGroups 12 }
+
+cshMonSfarmrealserverProbeStatsGroupRev1 OBJECT-GROUP
+    OBJECTS         {
+                        cshMonServerfarmRealPassedProbes,
+                        cshMonServerfarmRealFailedProbes,
+                        cshMonServerfarmRealProbeHealthMonState,
+                        cshMonServerfarmRealProbeLastProbeTime,
+                        cshMonServerfarmRealProbeLastActiveTime,
+                        cshMonServerfarmRealProbeLastFailedTime,
+                        cshMonProbeInheritedPortType
+                    }
+    STATUS          current
+    DESCRIPTION
+        "Group of objects providing statistics of a probe applied
+        to a real server."
+    ::= { ciscoSlbHealthMonMIBGroups 13 }
+
+cshMonProbeTypeStatsGroup OBJECT-GROUP
+    OBJECTS         {
+                        cshMonProbeTotalSentProbes,
+                        cshMonProbeTotalPassedProbes,
+                        cshMonProbeTotalConnectionErrors,
+                        cshMonProbeTotalReceivedRSTs,
+                        cshMonProbeTotalReceiveTimeouts,
+                        cshMonProbeTotalSendFailures,
+                        cshMonProbeTotalFailedProbes,
+                        cshMonProbeTotalRefusedConns,
+                        cshMonProbeTotalOpenTimeouts,
+                        cshMonProbeTotalActiveSockets
+                    }
+    STATUS          current
+    DESCRIPTION
+        "Group of objects providing statistics per probe type."
+    ::= { ciscoSlbHealthMonMIBGroups 14 }
+
+cshMonNotifObjectsGroup OBJECT-GROUP
+    OBJECTS         { cshMonSocketOverusageCount }
+    STATUS          current
+    DESCRIPTION
+        "Group of notification objects."
+    ::= { ciscoSlbHealthMonMIBGroups 15 }
+
+cshMonNotifGroup NOTIFICATION-GROUP
+   NOTIFICATIONS    {
+                        cshMonSocketOveruse,
+                        cshMonSocketNormalUse
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing healthmon notifications."
+    ::= { ciscoSlbHealthMonMIBGroups 16 }
+
+END