summaryrefslogtreecommitdiff
path: root/MIBS/cisco/CISCO-STP-EXTENSIONS-MIB
diff options
context:
space:
mode:
authorDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
committerDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
commit98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch)
tree9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/cisco/CISCO-STP-EXTENSIONS-MIB
downloadmibs-main.tar.gz
mibs-main.zip
Initial commitHEADmain
Diffstat (limited to 'MIBS/cisco/CISCO-STP-EXTENSIONS-MIB')
-rw-r--r--MIBS/cisco/CISCO-STP-EXTENSIONS-MIB5588
1 files changed, 5588 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-STP-EXTENSIONS-MIB b/MIBS/cisco/CISCO-STP-EXTENSIONS-MIB
new file mode 100644
index 0000000..6f55c81
--- /dev/null
+++ b/MIBS/cisco/CISCO-STP-EXTENSIONS-MIB
@@ -0,0 +1,5588 @@
+-- *****************************************************************
+-- CISCO-STP-EXTENSIONS-MIB
+--
+-- August 1997, Fei Xu
+--
+-- Copyright (c) 1997-2014, 2017 by Cisco Systems Inc.
+-- All rights reserved.
+-- *****************************************************************
+
+CISCO-STP-EXTENSIONS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ Counter32,
+ Integer32,
+ Unsigned32,
+ NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE,
+ OBJECT-GROUP,
+ NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ TruthValue,
+ TimeStamp,
+ DisplayString,
+ RowStatus,
+ TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ dot1dStpPortEntry
+ FROM BRIDGE-MIB
+ vlanTrunkPortEntry,
+ VlanIndex,
+ vtpVlanEntry,
+ vtpVlanEditEntry
+ FROM CISCO-VTP-MIB
+ ciscoMgmt
+ FROM CISCO-SMI;
+
+
+ciscoStpExtensionsMIB MODULE-IDENTITY
+ LAST-UPDATED "201708240000Z"
+ ORGANIZATION "Cisco Systems, Inc."
+ CONTACT-INFO
+ "Cisco Systems
+ Customer Service
+
+ Postal: 170 W Tasman Drive
+ San Jose, CA 95134
+ USA
+
+ Tel: +1 800 553-NETS
+
+ E-mail: cs-wbu@cisco.com"
+ DESCRIPTION
+ "The MIB module for managing Cisco extensions to
+ the 802.1D Spanning Tree Protocol (STP)."
+ REVISION "201708240000Z"
+ DESCRIPTION
+ "Added stpxMstInconsistencyTable & stpxMstInconsistencyUpdate."
+ REVISION "201407100000Z"
+ DESCRIPTION
+ "Added stpxL2GatewayDomainIdGroup.
+ Added a new value network(3) to stpxFastStartGlobalDefaultMode.
+ Added a new value network(3) to stpxFastStartOperMode."
+ REVISION "201303070000Z"
+ DESCRIPTION
+ "Added one new value network(5) to stpxFastStartPortMode."
+ REVISION "200512200000Z"
+ DESCRIPTION
+ "Added bit value rstp(5) to stpxSMSTPortStatus and
+ dispute(4) to stpxRPVSTPortStatus."
+ REVISION "200504120000Z"
+ DESCRIPTION
+ "Changed the description clauses of stpxMSTMaxHopCount
+ and stpxMSTInstanceRemainingHopCount.
+ Added StpxMSTConfigurationDigest textual convention.
+ Deprecated stpxMSTGroup3 and added the following groups:
+ stpxRSTPTransmitHoldCountGroup,
+ stpxSMSTPortMSTModeGroup, stpxSMSTMaxHopCountGroup,
+ stpxSMSTConfigDigestGroup and stpxMSTGroup4.
+ Added bit dispute(4) into the BITS syntax of
+ stpxSMSTPortStatus.
+ Deprecated stpxMIBCompliance11 and added
+ stpxMIBCompliance12."
+ REVISION "200407210000Z"
+ DESCRIPTION
+ "Added stpxPathCostOperModeGroup
+ and changed the decription of
+ stpxSpanningTreePathCostMode."
+ REVISION "200404080000Z"
+ DESCRIPTION
+ "Added stpxSMSTInstanceCISTGroup.
+ Added 3 new bit values into the BITS syntax
+ of stpxNotificationEnable:
+ inconsistency(2), rootInconsistency(3),
+ and loopInconsistency(4)."
+ REVISION "200401140000Z"
+ DESCRIPTION
+ "Deprecated stpxMSTGroup2 and
+ stpxPreferredMSTInstancesGroup.
+ Added stpxMSTGroup3, stpxSMSTGroup,
+ stpxSMSTInstanceGroup, stpxSMSTInstanceEditGroup,
+ stpxSMSTPortStatusGroup, stpxSMSTPortHelloTimeGroup.
+ Added one new value master(7) to stpxMSTPortRoleValue
+ and stpxRSTPPortRoleValue. Added 2 new unused bit
+ value into the BITS syntax of stpxRPVSTPortStatus."
+ REVISION "200310230000Z"
+ DESCRIPTION
+ "Added stpxExtendedSysIDGroup,
+ stpxNotificationEnableGroup, and
+ stpxFastStartOperModeGroup."
+ REVISION "200207110000Z"
+ DESCRIPTION
+ "Added Rapid Spanning Tree Protocol support.
+ Added stpxUplinkFastOperEnabled and
+ stpxBackboneFastOperEnabled objects.
+ Replaced stpxMSTPortAdminLinkType,
+ stpxMSTPortOperLinkType,
+ stpxMSTPortProtocolMigration
+ with stpxRSTPPortAdminLinkType,
+ stpxRSTPPortOperLinkType and
+ stpxRSTPPortProtocolMigration
+ defined in stpxRSTPPortTable.
+ Replaced stpxMSTPortRoleTable with
+ stpxRSTPPortRoleTable. Added stpxRPVSTPortTable."
+ REVISION "200112060000Z"
+ DESCRIPTION
+ "Added per port Bpdu Guard and Bpdu Filter
+ mode configuration support. Modified the
+ description of stpxUplinkFastEnabled and
+ stpxUplinkStationLearningGenRate for MST
+ support."
+ REVISION "200109140000Z"
+ DESCRIPTION
+ "Added MST support, Loop Guard Global Default mode
+ support and Fast Start Global Default mode support.
+ Deprecated stpxFastStartPortEnable and
+ stpxLoopGuardConfigEnabled objects. Changed description
+ of stpxUplinkFastEnabled, stpxUplinkFastTransitions,
+ stpxUplinkStationLearningGenRate,
+ stpxUplinkStationLearningFrames objects for MST support."
+ REVISION "200106200000Z"
+ DESCRIPTION
+ "Added BPDU Skewing feature support and modified
+ the SYNTAX clause of stpxUplinkStationLearningGenRate."
+ REVISION "200104120000Z"
+ DESCRIPTION
+ "Added PVST+ VLAN Configuration, MISTP to VLAN mapping,
+ Loopguard, and Port Fast Start support."
+ REVISION "200005230000Z"
+ DESCRIPTION
+ "Added Long Spanning Tree Path Cost Mode support."
+ REVISION "200003210000Z"
+ DESCRIPTION
+ "Added Rootguard, 4k VLAN and MISTP support."
+ REVISION "9711101200Z"
+ DESCRIPTION
+ "Additional objects to support SSTP."
+ REVISION "9708191200Z"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ ::= { ciscoMgmt 82 }
+
+
+stpxObjects OBJECT IDENTIFIER
+ ::= { ciscoStpExtensionsMIB 1 }
+
+stpxUplinkFastObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 1 }
+
+stpxVlanObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 2 }
+
+stpxInconsistencyObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 3 }
+
+stpxBackboneFastObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 4 }
+
+stpxRootGuardObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 5 }
+
+stpxSpanningTreeObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 6 }
+
+stpxMISTPObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 7 }
+
+stpxLoopGuardObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 8 }
+
+stpxFastStartObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 9 }
+
+stpxBpduSkewingObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 10 }
+
+stpxMSTObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 11 }
+
+stpxRSTPObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 12 }
+
+stpxRPVSTObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 13 }
+
+stpxSMSTObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 14 }
+
+stpxL2GatewayObjects OBJECT IDENTIFIER
+ ::= { stpxObjects 16 }
+
+stpxNotifications OBJECT IDENTIFIER
+ ::= { ciscoStpExtensionsMIB 2 }
+
+
+-- Textual Conventions
+
+StpxMSTConfigurationDigest ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "1x"
+ STATUS current
+ DESCRIPTION
+ "Represents an MST configuration digest."
+ SYNTAX OCTET STRING (SIZE (16))
+
+-- UplinkFast capability
+
+stpxUplinkFastEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An indication of whether the UplinkFast capability is
+ administratively enabled on the device.
+
+ If the platform does not support configuration of this
+ object when the object value of stpxSpanningTreeType is
+ mst(4), then this object is not instantiated."
+ ::= { stpxUplinkFastObjects 1 }
+
+stpxUplinkFastTransitions OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "transitions"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cumulative number of UplinkFast transitions (from
+ the STP 'Blocking' state directly to the STP 'Forwarding'
+ state). All transitions are included in this counter,
+ irrespective of the instance of the Spanning Tree
+ Protocol on which they occur.
+
+ If the platform supports the stpxUplinkFastOperEnabled
+ object, then this object is not instantiated when the
+ object value of stpxUplinkFastOperEnabled is false(2).
+ If the platform does not support the
+ stpxUplinkFastOperEnabled object, then this object is
+ not instantiated when the object value of
+ stpxSpanningTreeType is mst(4)."
+ ::= { stpxUplinkFastObjects 2 }
+
+stpxUplinkStationLearningGenRate OBJECT-TYPE
+ SYNTAX Integer32 (0..32000)
+ UNITS "frames"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of station-learning frames that this
+ device will generate in each 100 milli-second period after
+ a UplinkFast transition. By configuring this object, the
+ network administrator can limit the rate at which
+ station-learning frames are generated.
+
+ If the platform does not support configuration of this
+ object when the object value of stpxSpanningTreeType is
+ mst(4), then this object is not instantiated."
+ ::= { stpxUplinkFastObjects 3 }
+
+stpxUplinkStationLearningFrames OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "frames"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The cumulative number of station-learning frames generated
+ due to UplinkFast transitions. All generated
+ station-learning frames are included in this counter,
+ irrespective of the instance of the Spanning Tree Protocol
+ on which the UplinkFast transition occurred.
+
+ If the platform supports the stpxUplinkFastOperEnabled
+ object, then this object is not instantiated when the
+ object value of stpxUplinkFastOperEnabled is false(2).
+ If the platform does not support the
+ stpxUplinkFastOperEnabled object, then this object is
+ not instantiated when the object value of
+ stpxSpanningTreeType is mst(4)."
+ ::= { stpxUplinkFastObjects 4 }
+
+stpxUplinkFastOperEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication of whether the UplinkFast capability is
+ operationally enabled on the device."
+ ::= { stpxUplinkFastObjects 5 }
+-- Preferred VLANs for Load-Sharing across VLAN Trunk Ports
+
+stpxPreferredVlansTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxPreferredVlansEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table containing indications of which VLANs are
+ preferred on which VLAN trunk ports. The preferred
+ VLANs on a trunk port have a lower Path Cost value
+ compared with the VLANs on the trunk not in the
+ preferred list. If the value of stpxSpanningTreeType
+ is neither pvstPlus(1) nor rapidPvstPlus(5), the
+ configuration in this table has no effect."
+ ::= { stpxVlanObjects 1 }
+
+stpxPreferredVlansEntry OBJECT-TYPE
+ SYNTAX StpxPreferredVlansEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry indicating which VLANs are preferred on a
+ specific VLAN trunk port."
+ AUGMENTS { vlanTrunkPortEntry }
+ ::= { stpxPreferredVlansTable 1 }
+
+StpxPreferredVlansEntry ::= SEQUENCE {
+ stpxPreferredVlansMap OCTET STRING,
+ stpxPreferredVlansMap2k OCTET STRING,
+ stpxPreferredVlansMap3k OCTET STRING,
+ stpxPreferredVlansMap4k OCTET STRING
+}
+
+stpxPreferredVlansMap OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN in the
+ management domain on this trunk port. The first octet
+ corresponds to VLANs with VlanIndex values of 0 through 7;
+ the second octet to VLANs 8 through 15; etc. The most
+ significant bit of each octet corresponds to the lowest
+ value VlanIndex in that octet.
+
+ For each VLAN, if it is preferred on this trunk port, then
+ the bit corresponding to that VLAN is set to '1'.
+ The default value is 128 bytes of zeros.
+
+ To avoid conflicts between overlapping partial updates by
+ multiple managers, i.e., updates which modify only a portion
+ of an instance of this object (e.g., enable/disable a single
+ VLAN on the trunk port), any SNMP Set operation accessing an
+ instance of this object should also write the value of
+ vlanTrunkPortSetSerialNo."
+ ::= { stpxPreferredVlansEntry 1 }
+
+stpxPreferredVlansMap2k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for VLANS
+ with VlanIndex values of 1024 through 2047 in the management
+ domain on this trunk port. The first octet corresponds to
+ VLANs with VlanIndex values of 1024 through 1031;
+ the second octet to VLANs 1032 through 1039; etc.
+ The most significant bit of each octet corresponds to the
+ lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is preferred on this trunk port, then
+ the bit corresponding to that VLAN is set to '1'.
+ The default value is 128 bytes of zeros.
+
+ To avoid conflicts between overlapping partial updates by
+ multiple managers, i.e., updates which modify only a portion
+ of an instance of this object (e.g., enable/disable a single
+ VLAN on the trunk port), any SNMP Set operation accessing an
+ instance of this object should also write the value of
+ vlanTrunkPortSetSerialNo."
+ ::= { stpxPreferredVlansEntry 2 }
+
+stpxPreferredVlansMap3k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for VLANS
+ with VlanIndex values of 2048 through 3071 in the management
+ domain on this trunk port. The first octet corresponds to
+ VLANs with VlanIndex values of 2048 through 2055;
+ the second octet to VLANs 2056 through 2063; etc.
+ The most significant bit of each octet corresponds to the
+ lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is preferred on this trunk port, then
+ the bit corresponding to that VLAN is set to '1'.
+ The default value is 128 bytes of zeros.
+
+ To avoid conflicts between overlapping partial updates by
+ multiple managers, i.e., updates which modify only a portion
+ of an instance of this object (e.g., enable/disable a single
+ VLAN on the trunk port), any SNMP Set operation accessing an
+ instance of this object should also write the value of
+ vlanTrunkPortSetSerialNo."
+ ::= { stpxPreferredVlansEntry 3 }
+
+stpxPreferredVlansMap4k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for VLANS
+ with VlanIndex values of 3072 through 4095 in the management
+ domain on this trunk port. The first octet corresponds to
+ VLANs with VlanIndex values of 3072 through 3079;
+ the second octet to VLANs 3080 through 3087; etc.
+ The most significant bit of each octet corresponds to the
+ lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is preferred on this trunk port, then
+ the bit corresponding to that VLAN is set to '1'.
+ The default value is 128 bytes of zeros.
+
+ To avoid conflicts between overlapping partial updates by
+ multiple managers, i.e., updates which modify only a portion
+ of an instance of this object (e.g., enable/disable a single
+ VLAN on the trunk port), any SNMP Set operation accessing an
+ instance of this object should also write the value of
+ vlanTrunkPortSetSerialNo."
+ ::= { stpxPreferredVlansEntry 4 }
+
+
+-- Spanning Tree Protocol PVST+ VLAN Configuration
+
+stpxPVSTVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxPVSTVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of Virtual LAN entries containing
+ information for Spanning Tree PVST+ protocol.
+ An entry will exist for each VLAN existing on
+ the device."
+ ::= { stpxVlanObjects 2 }
+
+stpxPVSTVlanEntry OBJECT-TYPE
+ SYNTAX StpxPVSTVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing Spanning Tree PVST+ Protocol
+ information for a particular Virtual LAN."
+ INDEX { stpxPVSTVlanIndex }
+ ::= { stpxPVSTVlanTable 1 }
+
+StpxPVSTVlanEntry ::= SEQUENCE {
+ stpxPVSTVlanIndex VlanIndex,
+ stpxPVSTVlanEnable INTEGER
+}
+
+stpxPVSTVlanIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index value that uniquely identifies the
+ Virtual LAN associated with this information."
+ ::= { stpxPVSTVlanEntry 1 }
+
+stpxPVSTVlanEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2),
+ notApplicable(3) -- read-only
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Spanning Tree PVST+
+ Protocol is enabled for this Virtual LAN. If
+ Spanning Tree PVST+ Protocol is not supported
+ on this VLAN, then notApplicable(3) will be
+ returned while retrieving the object value for
+ this VLAN.
+
+ If the device only supports a single global
+ Spanning Tree PVST+ Protocol enable/disable
+ for all the existing VLANs, then the object
+ value assigned to this VLAN will be applied
+ to the object values of all the instances
+ in this table which do not have the value
+ of notApplicable(3).
+
+ If the value of stpxSpanningTreeType is neither
+ pvstPlus(1) nor rapidPvstPlus(5), then the value
+ of stpxPVSTVlanEnable for this VLAN can not be
+ changed."
+ DEFVAL { enabled }
+ ::= { stpxPVSTVlanEntry 2 }
+
+
+-- Objects to support Cisco's Shared Spanning Tree Protocol (SSTP).
+
+stpxInconsistencyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxInconsistencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the ports for which
+ a particular VLAN's Spanning Tree has been found to
+ have an inconsistency. Two types of inconsistency
+ are discovered: 1) an inconsistency where two different
+ port types have been plugged together; and 2) an
+ inconsistency where different switches have different
+ PVIDs for the same link."
+ ::= { stpxInconsistencyObjects 1 }
+
+stpxInconsistencyEntry OBJECT-TYPE
+ SYNTAX StpxInconsistencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A VLAN on a particular port for which a Spanning Tree
+ inconsistency is currently in effect."
+ INDEX {
+ stpxVlanIndex,
+ stpxPortIndex
+ }
+ ::= { stpxInconsistencyTable 1 }
+
+StpxInconsistencyEntry ::= SEQUENCE {
+ stpxVlanIndex VlanIndex,
+ stpxPortIndex Integer32,
+ stpxInconsistentState BITS
+}
+
+stpxVlanIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN id of the VLAN."
+ ::= { stpxInconsistencyEntry 1 }
+
+stpxPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxInconsistencyEntry 2 }
+
+stpxInconsistentState OBJECT-TYPE
+ SYNTAX BITS {
+ typeInconsistent(0),
+ pvidInconsistent(1) -- a PVID inconsistency
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The types of inconsistency which have been discovered on
+ this port for this VLAN's Spanning Tree.
+
+ When this object exists, the value of the corresponding
+ instance of the Bridge MIB's dot1dStpPortState object will
+ be 'broken(6)'."
+ REFERENCE "dot1dStpPortState is defined in RFC-1493."
+ ::= { stpxInconsistencyEntry 3 }
+
+
+
+stpxMstInconsistencyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxMstInconsistencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table that contains a list of the bridge ports for which a
+ particular spanning tree instance has been found to have an
+ inconsistency. The agent creates a new entry in this table
+ whenever it detects a new inconsistency, and deletes entries
+ when the inconsistency is no longer present.
+
+ Two types of inconsistencies are discovered:
+ (1) the inconsistency when two different port types have been
+ plugged together.
+ (2) the inconsistency when different switches have different
+ PVIDs for the same link."
+ ::= { stpxInconsistencyObjects 2 }
+
+stpxMstInconsistencyEntry OBJECT-TYPE
+ SYNTAX StpxMstInconsistencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The instance of a particular port for which the spanning tree
+ inconsistency is currently in effect."
+ INDEX {
+ stpxMstInconsistencyIndex,
+ stpxMstInconsistencyPortIndex
+ }
+ ::= { stpxMstInconsistencyTable 1 }
+
+StpxMstInconsistencyEntry ::= SEQUENCE {
+ stpxMstInconsistencyIndex Integer32,
+ stpxMstInconsistencyPortIndex Integer32,
+ stpxMstInconsistencyState BITS
+}
+
+stpxMstInconsistencyIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Spanning Tree Instance ID, such as the MST instance."
+ ::= { stpxMstInconsistencyEntry 1 }
+
+stpxMstInconsistencyPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dotdBasePort (i.e. dot1dBridge.1.4) for the bridge
+ port."
+ ::= { stpxMstInconsistencyEntry 2 }
+
+stpxMstInconsistencyState OBJECT-TYPE
+ SYNTAX BITS {
+ typeInconsistent(0),
+ pvidInconsistent(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of inconsistency which has been discovered on
+ this port for this Spanning Tree.
+
+ When this object exists, the value of the corresponding
+ instance of the Bridge MIB's dot1dStpPortState object will
+ be 'broken(6)'."
+ REFERENCE "dot1dStpPortState is defined in RFC-1493."
+ ::= { stpxMstInconsistencyEntry 3 }
+
+
+
+-- BackboneFast capability
+
+stpxBackboneFastEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An indication of whether the BackboneFast capability is
+ administratively enabled on the device."
+ ::= { stpxBackboneFastObjects 1 }
+
+stpxBackboneFastInInferiorBPDUs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of inferior BPDUs received by the switch
+ since the stpxBackboneFastOperEnabled has
+ become true(1). If the value of
+ stpxBackboneFastOperEnabled is false(2), then this
+ mib object will have a value of 0."
+ ::= { stpxBackboneFastObjects 2 }
+
+stpxBackboneFastInRLQRequestPDUs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Root Link Query request PDUs received by the
+ switch since the stpxBackboneFastOperEnabled has become
+ true(1). If the value of stpxBackboneFastOperEnabled is
+ false(2), then this mib object will have a value of 0."
+ ::= { stpxBackboneFastObjects 3 }
+
+stpxBackboneFastInRLQResponsePDUs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Root Link Query response PDUs received by the
+ switch since the stpxBackboneFastOperEnabled has become
+ true(1). If the value of stpxBackboneFastOperEnabled is
+ false(2), then this mib object will have a value of 0."
+ ::= { stpxBackboneFastObjects 4 }
+
+stpxBackboneFastOutRLQRequestPDUs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Root Link Query request PDUs transmitted by
+ the switch since the stpxBackboneFastOperEnabled has become
+ true(1). If the value of stpxBackboneFastOperEnabled is
+ false(2), then this mib object will have a value of 0."
+ ::= { stpxBackboneFastObjects 5 }
+
+stpxBackboneFastOutRLQResponsePDUs OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of Root Link Query response PDUs transmitted by
+ the switch since the stpxBackboneFastOperEnabled has become
+ true(1). If the value of stpxBackboneFastOperEnabled is
+ false(2), then this mib object will have a value of 0."
+ ::= { stpxBackboneFastObjects 6 }
+
+stpxBackboneFastOperEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication of whether the BackboneFast capability is
+ operationally enabled on the device."
+ ::= { stpxBackboneFastObjects 7 }
+-- STP Root Guard Capability
+
+stpxRootGuardConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxRootGuardConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports for which
+ Spanning Tree RootGuard capability can be configured."
+ ::= { stpxRootGuardObjects 1 }
+
+stpxRootGuardConfigEntry OBJECT-TYPE
+ SYNTAX StpxRootGuardConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A bridge port for which Spanning Tree RootGuard
+ capability can be configured."
+ INDEX { stpxRootGuardConfigPortIndex }
+ ::= { stpxRootGuardConfigTable 1 }
+
+StpxRootGuardConfigEntry ::= SEQUENCE {
+ stpxRootGuardConfigPortIndex Integer32,
+ stpxRootGuardConfigEnabled TruthValue
+}
+
+stpxRootGuardConfigPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxRootGuardConfigEntry 1 }
+
+stpxRootGuardConfigEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An indication of whether the RootGuard capability is
+ enabled on this port or not. This configuration will be
+ applied to all Spanning Tree instances in which this port
+ exists."
+ DEFVAL { false }
+ ::= { stpxRootGuardConfigEntry 2 }
+
+
+
+stpxRootInconsistencyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxRootInconsistencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports for which
+ a particular Spanning Tree instance has been found
+ to have an root-inconsistency. The agent creates a new
+ entry in this table whenever it detects a new
+ root-inconsistency, and deletes entries
+ when/soon after the inconsistency is no longer present."
+ ::= { stpxRootGuardObjects 2 }
+
+stpxRootInconsistencyEntry OBJECT-TYPE
+ SYNTAX StpxRootInconsistencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Spanning Tree instance on a particular port for
+ which a Spanning Tree root-inconsistency is currently
+ in effect."
+ INDEX {
+ stpxRootInconsistencyIndex,
+ stpxRootInconsistencyPortIndex
+ }
+ ::= { stpxRootInconsistencyTable 1 }
+
+StpxRootInconsistencyEntry ::= SEQUENCE {
+ stpxRootInconsistencyIndex Integer32,
+ stpxRootInconsistencyPortIndex Integer32,
+ stpxRootInconsistencyState TruthValue
+}
+
+stpxRootInconsistencyIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Spanning Tree instance id, such as the VLAN id
+ of the VLAN if the object value of stpxSpanningTreeType
+ is pvstPlus(1) or rapidPvstPlus(5)."
+ ::= { stpxRootInconsistencyEntry 1 }
+
+stpxRootInconsistencyPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxRootInconsistencyEntry 2 }
+
+stpxRootInconsistencyState OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the port on a particular Spanning
+ Tree instance is currently in root-inconsistent
+ state or not."
+ ::= { stpxRootInconsistencyEntry 3 }
+
+
+
+-- stpxSpanningTreeObjects
+
+stpxSpanningTreeType OBJECT-TYPE
+ SYNTAX INTEGER {
+ pvstPlus(1),
+ mistp(2),
+ mistpPvstPlus(3),
+ mst(4),
+ rapidPvstPlus(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The actual mode of spanning tree protocol runs
+ on the device. It can be one of the following:
+
+ pvstPlus -- PVST+ (Per VLAN Spanning Tree+ Protocol).
+
+ mistp -- MISTP (Multi Instance Spanning Tree Protocol).
+
+ mistpPvstPlus -- MISTP with the tunneling scheme
+ enabled for PVST+.
+
+ mst -- IEEE 802.1s Multiple Spanning Tree (MST)
+ with IEEE 802.1w Rapid Spanning Tree Protocol
+ (RSTP).
+
+ rapidPvstPlus -- IEEE 802.1w Rapid Spanning Tree
+ Protocol (RSTP) for all vlans in PVST+.
+
+ When the value of this MIB object gets changed, the
+ network connectivity would be affected and the
+ connectivity to this device would also be lost
+ temporarily."
+ DEFVAL { pvstPlus }
+ ::= { stpxSpanningTreeObjects 1 }
+
+stpxSpanningTreePathCostMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ short(1), -- 16 bits spanning tree path
+ -- cost mode
+ long(2) -- 32 bits spanning tree path
+ -- cost mode
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the administrative spanning tree path cost mode
+ configured on device."
+ DEFVAL { short }
+ ::= { stpxSpanningTreeObjects 2 }
+
+stpxLongStpPortPathCostTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxLongStpPortPathCostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing the spanning tree port path cost
+ configuration when stpxSpanningTreePathCostOperMode is
+ long(2).
+
+ If the value of stpxSpanningTreePathCostOperMode is
+ short(1), this table is not instantiated."
+ ::= { stpxSpanningTreeObjects 3 }
+
+stpxLongStpPortPathCostEntry OBJECT-TYPE
+ SYNTAX StpxLongStpPortPathCostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing the spanning tree port path cost
+ configuration."
+ AUGMENTS { dot1dStpPortEntry }
+ ::= { stpxLongStpPortPathCostTable 1 }
+
+StpxLongStpPortPathCostEntry ::= SEQUENCE {
+ stpxLongStpPortPathCost Unsigned32
+}
+
+stpxLongStpPortPathCost OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The contribution of this port to the path cost (in 32
+ bits value) of paths towards the spanning tree root which
+ include this port.
+
+ This object is used to configure the spanning tree port
+ path cost in 32 bits value range when the
+ stpxSpanningTreePathCostOperMode is long(2).
+
+ If the stpxSpanningTreePathCostOperMode is short(1), this
+ MIB object is not instantiated."
+ ::= { stpxLongStpPortPathCostEntry 1 }
+
+
+
+stpxExtendedSysIDAdminEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Extended System ID feature
+ is administratively enabled on the device or not."
+ REFERENCE "IEEE 802.1t."
+ ::= { stpxSpanningTreeObjects 4 }
+
+stpxExtendedSysIDOperEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether Extended System ID feature
+ is operationaly enabled on the device or not.
+
+ If the value of this object is true(1), then
+ the accepted values for dot1dStpPriority
+ in BRIDGE-MIB should be multiples of 4096 plus
+ bridge instance ID, such as VlanIndex. Changing
+ this object value might cause the values of
+ dot1dBaseBridgeAddress and dot1dStpPriority
+ in BRIDGE-MIB to be changed also."
+ REFERENCE "IEEE 802.1t."
+ ::= { stpxSpanningTreeObjects 5 }
+
+stpxNotificationEnable OBJECT-TYPE
+ SYNTAX BITS {
+ newRoot(0),
+ topologyChange(1),
+ inconsistency(2),
+ rootInconsistency(3),
+ loopInconsistency(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether a specified notification is enabled or not.
+ If a bit corresponding to a notification is set to 1, then
+ the specified notification can be generated.
+
+ newRoot -- the newRoot notification as defined in BRIDGE-MIB.
+
+ topologyChange -- the topologyChange notification as
+ defined in BRIDGE-MIB.
+
+ inconsistency -- the stpxInconsistencyUpdate notification.
+
+ rootInconsistency -- the stpxRootInconsistencyUpdate
+ notification.
+
+ loopInconsistency -- the stpxLoopInconsistencyUpdate
+ notification."
+ ::= { stpxSpanningTreeObjects 6 }
+
+stpxSpanningTreePathCostOperMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ short(1), -- 16 bits spanning tree path
+ -- cost mode
+ long(2) -- 32 bits spanning tree path
+ -- cost mode
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate the operational spanning tree path cost mode
+ on device. This mode applies to all instances of the Spanning
+ Tree protocol running on the device.
+
+ When the value of this MIB object gets changed, the path cost
+ of all ports will be reassigned to the default path cost
+ values based on the new spanning tree path cost mode and the
+ ports' speed.
+
+ When the value of this MIB object is long(2),
+ the stpxLongStpPortPathCost MIB object must be used in order
+ to retrieve/configure the spanning tree port path cost as a
+ 32 bits value. The set operation on dot1dStpPortPathCost in
+ BRIDGE-MIB will be rejected. While retrieving the value of
+ dot1dStpPortPathCost, the maximum value of 65535 will be
+ returned if the value of stpxLongStpPortPathCost for the same
+ instance exceeds 65535.
+
+ When the value of this MIB object is short(1),
+ the dot1dStpPortPathCost in BRIDGE-MIB must be used."
+ ::= { stpxSpanningTreeObjects 7 }
+
+-- MISTP Objects
+
+stpxMISTPInstanceNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of MISTP instances, that are supported by the device
+ when the value of stpxSpanningTreeType is either mistp(2)
+ or mistpPvstPlus(3)."
+ ::= { stpxMISTPObjects 1 }
+-- When stpxSpanningTreeType is modified from a value of 'pvstPlus' to
+-- either 'mistp' or 'mistpPvstPlus', the agent will create a fixed
+-- number (specified in stpxMISTPInstanceNumber) of MISTP instances in
+-- this table. When stpxSpanningTreeType is changed to 'pvstPlus', the
+-- agent will delete all the MISTP instances from this table and also
+-- all the MIB objects associated with them.
+
+stpxMISTPInstanceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxMISTPInstanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains one entry for each instance of MISTP and
+ it contains stpxMISTPInstanceNumber entries, numbered from 1
+ to stpxMISTPInstanceNumber.
+
+ This table is only instantiated when the value of
+ stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3)."
+ ::= { stpxMISTPObjects 2 }
+
+stpxMISTPInstanceEntry OBJECT-TYPE
+ SYNTAX StpxMISTPInstanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing the status of the MISTP
+ instance."
+ INDEX { stpxMISTPInstanceIndex }
+ ::= { stpxMISTPInstanceTable 1 }
+
+StpxMISTPInstanceEntry ::= SEQUENCE {
+ stpxMISTPInstanceIndex Integer32,
+ stpxMISTPInstanceEnable TruthValue,
+ stpxMISTPInstanceVlansMapped OCTET STRING,
+ stpxMISTPInstanceVlansMapped2k OCTET STRING,
+ stpxMISTPInstanceVlansMapped3k OCTET STRING,
+ stpxMISTPInstanceVlansMapped4k OCTET STRING
+}
+
+stpxMISTPInstanceIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..256)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An arbitrary integer within the range from 1 to the value of
+ stpxMISTPInstanceNumber that uniquely identifies an instance."
+ ::= { stpxMISTPInstanceEntry 1 }
+
+stpxMISTPInstanceEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether the MISTP protocol is currently
+ enabled on the MISTP instance.
+
+ If this object is set to
+ 'true' - the MISTP protocol will run on this instance.
+
+ 'false' - the MISTP protocol will stop running on this
+ instance."
+ DEFVAL { true }
+ ::= { stpxMISTPInstanceEntry 2 }
+
+stpxMISTPInstanceVlansMapped OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 0 through 7; the second octet to VLANs 8 through
+ 15; etc. The most significant bit of each octet
+ corresponds to the lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is mapped to this MISTP instance,
+ then the bit corresponding to that VLAN is set to '1'."
+ ::= { stpxMISTPInstanceEntry 3 }
+
+stpxMISTPInstanceVlansMapped2k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 1024 through 2047. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 1024 through 1031; the second octet to VLANs 1032
+ through 1039; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MISTP instance,
+ then the bit corresponding to that VLAN is set to '1'.
+
+ This object is only instantiated on devices with
+ support for VlanIndex up to 4095."
+ ::= { stpxMISTPInstanceEntry 4 }
+
+stpxMISTPInstanceVlansMapped3k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 2048 through 3071. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 2048 through 2055; the second octet to VLANs 2056
+ through 2063; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MISTP instance,
+ then the bit corresponding to that VLAN is set to '1'.
+
+ This object is only instantiated on devices with
+ support for VlanIndex up to 4095."
+ ::= { stpxMISTPInstanceEntry 5 }
+
+stpxMISTPInstanceVlansMapped4k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 3072 through 4095. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 3072 through 3079; the second octet to VLANs 3080
+ through 3087; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MISTP instance,
+ then the bit corresponding to that VLAN is set to '1'.
+
+ This object is only instantiated on devices with
+ support for VlanIndex up to 4095."
+ ::= { stpxMISTPInstanceEntry 6 }
+
+
+
+stpxVlanMISTPInstMapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxVlanMISTPInstMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing the MISTP Instance Index of the VLANs for a
+ particular management domain.
+
+ This table is only instantiated when the value of
+ stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3)."
+ ::= { stpxMISTPObjects 3 }
+
+stpxVlanMISTPInstMapEntry OBJECT-TYPE
+ SYNTAX StpxVlanMISTPInstMapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing the MISTP Instance Index of the
+ VLAN for a particular management domain."
+ AUGMENTS { vtpVlanEntry }
+ ::= { stpxVlanMISTPInstMapTable 1 }
+
+StpxVlanMISTPInstMapEntry ::= SEQUENCE {
+ stpxVlanMISTPInstMapInstIndex Integer32
+}
+
+stpxVlanMISTPInstMapInstIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..256)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The MISTP instance, to which the corresponding vlan is mapped.
+ If this value of this mib object is 0, the corresponding vlan
+ is not configured to be mapped to any MISTP instance and all
+ the ports under this VLAN remain in blocking state."
+ ::= { stpxVlanMISTPInstMapEntry 1 }
+
+
+
+stpxVlanMISTPInstMapEditTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxVlanMISTPInstMapEditEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing the MISTP related information for the VLANs
+ in the Edit Buffers for a particular management domain.
+
+ This table is only instantiated when when the value of
+ stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3)."
+ ::= { stpxMISTPObjects 4 }
+
+stpxVlanMISTPInstMapEditEntry OBJECT-TYPE
+ SYNTAX StpxVlanMISTPInstMapEditEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about one VLAN mapping to one instance
+ in the Edit Buffer for a particular management domain."
+ AUGMENTS { vtpVlanEditEntry }
+ ::= { stpxVlanMISTPInstMapEditTable 1 }
+
+StpxVlanMISTPInstMapEditEntry ::= SEQUENCE {
+ stpxVlanMISTPInstMapEditInstIndex Integer32
+}
+
+stpxVlanMISTPInstMapEditInstIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..256)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The MISTP instance, to which the corresponding vlan would be
+ mapped. The value of this mib object is from 0 to the value of
+ stpxMISTPInstanceNumber. If setting the value of this object
+ to 0, the corresponding vlan will not be mapped to a MISTP
+ instance and all the ports under this VLAN will be moved into
+ the blocking state."
+ ::= { stpxVlanMISTPInstMapEditEntry 1 }
+
+
+
+stpxPreferredMISTPInstancesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxPreferredMISTPInstancesEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table containing indications of which MISTP instances
+ are preferred on which trunk ports. The preferred
+ MISTP instances on a trunk port have a lower Path Cost value
+ compared with the MISTP instances on the trunk not in the
+ preferred list.
+
+ This table is only instantiated when the value of
+ stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3)."
+ ::= { stpxMISTPObjects 5 }
+
+stpxPreferredMISTPInstancesEntry OBJECT-TYPE
+ SYNTAX StpxPreferredMISTPInstancesEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry indicating which MISTP instances are preferred on
+ a specific trunk port."
+ AUGMENTS { vlanTrunkPortEntry }
+ ::= { stpxPreferredMISTPInstancesTable 1 }
+
+StpxPreferredMISTPInstancesEntry ::= SEQUENCE {
+ stpxPreferredMISTPInstancesMap OCTET STRING
+}
+
+stpxPreferredMISTPInstancesMap OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per MISTP instances
+ in the management domain on this trunk port. The first octet
+ corresponds to MISTP instances with InstIndex values of 1
+ through 8; the second octet to MISTP instances 9 through 16;
+ etc. The most significant bit of each octet corresponds to
+ the lowest value instanceIndex in that octet. The number of
+ bits for this mib object will be determined by the value of
+ stpxMISTPInstanceNumber.
+
+ For each instance, if it is preferred on this trunk port,
+ then the bit corresponding to that instance is set to '1'.
+
+
+ To avoid conflicts between overlapping partial updates by
+ multiple managers, i.e., updates which modify only a portion
+ of an instance of this object (e.g., enable/disable a single
+ instance on the trunk port), any SNMP Set operation
+ accessing an instance of this object should also write the
+ value of vlanTrunkPortSetSerialNo."
+ ::= { stpxPreferredMISTPInstancesEntry 1 }
+
+
+-- STP Loop Guard Capability
+
+stpxLoopGuardConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxLoopGuardConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports for which
+ Spanning Tree LoopGuard capability can be configured."
+ ::= { stpxLoopGuardObjects 1 }
+
+stpxLoopGuardConfigEntry OBJECT-TYPE
+ SYNTAX StpxLoopGuardConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A bridge port for which Spanning Tree LoopGuard
+ capability can be configured."
+ INDEX { stpxLoopGuardConfigPortIndex }
+ ::= { stpxLoopGuardConfigTable 1 }
+
+StpxLoopGuardConfigEntry ::= SEQUENCE {
+ stpxLoopGuardConfigPortIndex Integer32,
+ stpxLoopGuardConfigEnabled TruthValue,
+ stpxLoopGuardConfigMode INTEGER
+}
+
+stpxLoopGuardConfigPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxLoopGuardConfigEntry 1 }
+
+stpxLoopGuardConfigEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "An indication of whether the LoopGuard capability is
+ enabled on this port or not. This configuration will be
+ applied to all the Spanning Tree instances in which this
+ port exists.
+
+ In order to support additional Loop Guard config mode
+ (default) as defined in stpxLoopGuardConfigMode other
+ than enable (true(1)) or disable (false(2)) as defined
+ in this object, stpxLoopGuardConfigMode object needs to
+ be used.
+
+ When the stpxLoopGuardConfigMode object has the value of
+ enable(1), the value of stpxLoopGuardConfigEnabled for
+ the same instance will be true(1). When the
+ stpxLoopGuardConfigMode object has the value of disable(2),
+ the value of stpxLoopGuardConfigEnabled for the same
+ instance will be false(2). When the stpxLoopGuardConfigMode
+ object has the value of default(3), the value of
+ stpxLoopGuardConfigEnabled for the same instance will
+ depend on the object value of
+ stpxLoopGuardGlobalDefaultMode."
+ DEFVAL { false }
+ ::= { stpxLoopGuardConfigEntry 2 }
+
+stpxLoopGuardConfigMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ default(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of Loop Guard Feature on this
+ port. This configuration will be applied to all
+ the Spanning Tree instances in which this port
+ exists.
+
+ enable -- the Loop Guard feature is enabled on this
+ port.
+
+ disable -- the Loop Guard feature is disabled on this
+ port.
+
+ default -- whether the Loop Guard feature is enabled
+ or not on this port depends on the object
+ value of stpxLoopGuardGlobalDefaultMode."
+ ::= { stpxLoopGuardConfigEntry 3 }
+
+
+
+stpxLoopInconsistencyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxLoopInconsistencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports for which
+ a particular Spanning Tree instance has been found
+ to have a loop-inconsistency. The agent creates a new
+ entry in this table whenever it detects a new
+ loop-inconsistency, and deletes entries
+ when/soon after the inconsistency is no longer present."
+ ::= { stpxLoopGuardObjects 2 }
+
+stpxLoopInconsistencyEntry OBJECT-TYPE
+ SYNTAX StpxLoopInconsistencyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Spanning Tree instance on a particular port for
+ which a Spanning Tree loop-inconsistency is currently
+ in effect."
+ INDEX {
+ stpxLoopInconsistencyIndex,
+ stpxLoopInconsistencyPortIndex
+ }
+ ::= { stpxLoopInconsistencyTable 1 }
+
+StpxLoopInconsistencyEntry ::= SEQUENCE {
+ stpxLoopInconsistencyIndex Integer32,
+ stpxLoopInconsistencyPortIndex Integer32,
+ stpxLoopInconsistencyState TruthValue
+}
+
+stpxLoopInconsistencyIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Spanning Tree instance id, such as the VLAN id
+ of the VLAN if the object value of stpxSpanningTreeType
+ is pvstPlus(1) or rapidPvstPlus(5)."
+ ::= { stpxLoopInconsistencyEntry 1 }
+
+stpxLoopInconsistencyPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxLoopInconsistencyEntry 2 }
+
+stpxLoopInconsistencyState OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the port on a particular Spanning
+ Tree instance is currently in loop-inconsistent
+ state or not."
+ ::= { stpxLoopInconsistencyEntry 3 }
+
+
+
+stpxLoopGuardGlobalDefaultMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the global default config mode of LoopGuard
+ feature on the device."
+ ::= { stpxLoopGuardObjects 3 }
+
+-- Spanning Tree Port Fast Start Objects
+
+stpxFastStartBpduGuardEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the global default mode of the Bpdu
+ Guard feature on the device.
+
+ On platforms that does not support per port
+ Bpdu Guard configuration as indicated by
+ the object stpxFastStartPortBpduGuardMode,
+ if the value of this object is set to true(1),
+ and the Fast Start Feature is operationally
+ enabled on a port, then that port will be
+ immediately disabled when the system receives
+ a BPDU from that port."
+ DEFVAL { false }
+ ::= { stpxFastStartObjects 1 }
+
+stpxFastStartBpduFilterEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the global default mode of the Bpdu
+ Filter feature on the device.
+
+ On platforms that does not support per port
+ Bpdu Filter configuration as indicated by
+ the object stpxFastStartPortBpduFilterMode,
+ if the value of this object is set to true(1),
+ and the Fast Start Feature is operationally
+ enabled on a port, then no BPDUs will be
+ transmitted on this port."
+ DEFVAL { false }
+ ::= { stpxFastStartObjects 2 }
+
+stpxFastStartPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxFastStartPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports for
+ which Spanning Tree Port Fast Start can be
+ configured."
+ ::= { stpxFastStartObjects 3 }
+
+stpxFastStartPortEntry OBJECT-TYPE
+ SYNTAX StpxFastStartPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A bridge port for which Spanning Tree Port Fast
+ Start can be configured."
+ INDEX { stpxFastStartPortIndex }
+ ::= { stpxFastStartPortTable 1 }
+
+StpxFastStartPortEntry ::= SEQUENCE {
+ stpxFastStartPortIndex Integer32,
+ stpxFastStartPortEnable TruthValue,
+ stpxFastStartPortMode INTEGER,
+ stpxFastStartPortBpduGuardMode INTEGER,
+ stpxFastStartPortBpduFilterMode INTEGER
+}
+
+stpxFastStartPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxFastStartPortEntry 1 }
+
+stpxFastStartPortEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates whether the port is operating in spantree
+ fast start mode. A port with fast start enabled is
+ immediately put in spanning tree forwarding state when
+ that port is detected by the Spanning Tree, rather
+ than starting in blocking state which is the normal
+ operation.
+
+ In order to support additional Fast Start enable mode
+ (enableForTrunk and default) as defined in
+ stpxFastStartPortMode other than enable (true(1))
+ or disable (false(2)) as defined in this object,
+ stpxFastStartPortMode object needs to be used.
+
+ When the stpxFastStartPortMode has the value of
+ enable(1) or enableForTrunk(3), the value of
+ stpxFastStartPortEnable for the same instance
+ will be true(1). When the stpxFastStartPortMode
+ has the value of disable(2), the value of
+ stpxFastStartPortEnable for the same instance will be
+ false(2). When the stpxFastStartPortMode has the value
+ of default(4), the value of stpxFastStartPortEnable for
+ the same instance depends on the object value of
+ stpxFastStartGlobalDefaultMode."
+ DEFVAL { false }
+ ::= { stpxFastStartPortEntry 2 }
+
+stpxFastStartPortMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ enableForTrunk(3),
+ default(4),
+ network(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of Fast Start Feature on the
+ port. A port with fast start enabled is immediately
+ put in spanning tree forwarding state when the port
+ is detected by the Spanning Tree, rather than
+ starting in blocking state which is the normal
+ operation.
+
+ enable -- the fast start feature is enabled on this
+ port but will only take effect when the
+ object value of its
+ vlanTrunkPortDynamicStatus as specified
+ in CISCO-VTP-MIB is notTrunking(2).
+
+ disable -- the fast start feature is disabled on this
+ port.
+
+ enableForTrunk -- the fast start feature is enabled
+ on this port and will take effect
+ regardless of the object value of
+ its vlanTrunkPortDynamicStatus.
+
+ default -- whether the fast start feature is enabled
+ or not on this port depends on the object
+ value of stpxFastStartGlobalDefaultMode.
+
+ network -- the network mode is enabled on this
+ port."
+ ::= { stpxFastStartPortEntry 3 }
+
+stpxFastStartPortBpduGuardMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ default(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of Bpdu Guard Feature on the
+ port. A port with Bpdu Guard enabled is
+ immediately disabled when the system
+ receives a BPDU from that port.
+
+ enable -- the Bpdu Guard feature is enabled on this
+ port.
+
+ disable -- the Bpdu Guard feature is disabled on this
+ port.
+
+ default -- whether the Bpdu Guard feature is enabled
+ or not on this port depends on the object
+ value of stpxFastStartBpduGuardEnable. If
+ the value of stpxFastStartBpduGuardEnable
+ is true(1) and Fast Start feature is also
+ enabled operationally on this port, then
+ this port is immediately disabled when
+ the system receives a BPDU from this port."
+ DEFVAL { default }
+ ::= { stpxFastStartPortEntry 4 }
+
+stpxFastStartPortBpduFilterMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ default(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of Bpdu Filter Feature on the
+ port. The system will not transmit BPDUs on a port
+ with Bpdu Filter feature enabled.
+
+ enable -- the Bpdu Filter feature is enabled on this
+ port.
+
+ disable -- the Bpdu Filter feature is disabled on this
+ port.
+
+ default -- whether the Bpdu Filter feature is enabled
+ or not on this port depends on the object
+ value of stpxFastStartBpduFilterEnable. If
+ the value of stpxFastStartBpduFilterEnable
+ is true(1) and Fast Start feature is also
+ enabled operationally on this port, then
+ no BPDUs will be transmitted on this port."
+ DEFVAL { default }
+ ::= { stpxFastStartPortEntry 5 }
+
+
+
+stpxFastStartGlobalDefaultMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2),
+ network(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the global default mode of the Fast
+ Start feature on the device.
+
+ enable -- the fast start feature is enabled and
+ the default port mode is edge mode.
+ disable -- the fast start feature is disabled.
+ network -- the default port mode is network mode."
+ DEFVAL { disable }
+ ::= { stpxFastStartObjects 4 }
+
+stpxFastStartOperModeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxFastStartOperModeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports
+ for a particular Spanning Tree Instance."
+ ::= { stpxFastStartObjects 5 }
+
+stpxFastStartOperModeEntry OBJECT-TYPE
+ SYNTAX StpxFastStartOperModeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry with port fast start oper mode
+ information on a bridge port for a particular
+ Spanning Tree Instance."
+ INDEX {
+ stpxFastStartOperModeInstIndex,
+ stpxFastStartOperModePortIndex
+ }
+ ::= { stpxFastStartOperModeTable 1 }
+
+StpxFastStartOperModeEntry ::= SEQUENCE {
+ stpxFastStartOperModeInstIndex Integer32,
+ stpxFastStartOperModePortIndex Integer32,
+ stpxFastStartOperMode INTEGER
+}
+
+stpxFastStartOperModeInstIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Spanning Tree instance id, such as the VLAN id
+ of the VLAN if the object value of stpxSpanningTreeType
+ is pvstPlus(1)."
+ ::= { stpxFastStartOperModeEntry 1 }
+
+stpxFastStartOperModePortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxFastStartOperModeEntry 2 }
+
+stpxFastStartOperMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2),
+ network(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the fast start operational status of the
+ port on a particular Spanning Tree Instance.
+ enable -- the fast start feature is operationally
+ enabled on this port and the port is in
+ edge mode.
+ disable -- the fast start feature is operationally
+ disabled on this port.
+ network -- the port is in network mode."
+ ::= { stpxFastStartOperModeEntry 3 }
+
+
+
+-- BPDU Skewing Feature
+
+stpxBpduSkewingDetectionEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether BPDU skewing detection feature
+ is enabled or not on the system. If this object has
+ the value of true(1), then the system will detect
+ whether BPDUs received by any port on any Spanning
+ Tree instance are processed at an interval longer
+ than the object value of dot1dStpHelloTime in the
+ BIRDGE-MIB of the Spanning Tree instance."
+ DEFVAL { false }
+ ::= { stpxBpduSkewingObjects 1 }
+
+stpxBpduSkewingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxBpduSkewingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports for
+ which a particular Spanning Tree instance has been
+ detected to have BPDU skewing occurred since the
+ object value of stpxBpduSkewingDetectionEnable was
+ last changed to true(1).
+
+ The agent creates a new entry in this table whenever
+ a port in a particular Spanning Tree instance is
+ detected to be BPDU skewed since the object value of
+ stpxBpduSkewingDetectionEnable object is changed to
+ true(1). The agent deletes all the entries in this
+ table when the object value of
+ stpxBpduSkewingDetectionEnable is changed to false(2)
+ or the object value of stpxSpanningTreeType is
+ changed."
+ ::= { stpxBpduSkewingObjects 2 }
+
+stpxBpduSkewingEntry OBJECT-TYPE
+ SYNTAX StpxBpduSkewingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Spanning Tree instance on a particular port for
+ which BPDU skewing has been detected."
+ INDEX {
+ stpxBpduSkewingInstanceIndex,
+ stpxBpduSkewingPortIndex
+ }
+ ::= { stpxBpduSkewingTable 1 }
+
+StpxBpduSkewingEntry ::= SEQUENCE {
+ stpxBpduSkewingInstanceIndex Integer32,
+ stpxBpduSkewingPortIndex Integer32,
+ stpxBpduSkewingLastSkewDuration Unsigned32,
+ stpxBpduSkewingWorstSkewDuration Unsigned32,
+ stpxBpduSkewingWorstSkewTime TimeStamp
+}
+
+stpxBpduSkewingInstanceIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Spanning Tree instance id, such as the VLAN id
+ of the VLAN if the object value of stpxSpanningTreeType
+ is pvstPlus(1)."
+ ::= { stpxBpduSkewingEntry 1 }
+
+stpxBpduSkewingPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxBpduSkewingEntry 2 }
+
+stpxBpduSkewingLastSkewDuration OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the skew duration in milliseconds of the
+ last BPDU skewing detected."
+ ::= { stpxBpduSkewingEntry 3 }
+
+stpxBpduSkewingWorstSkewDuration OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the skew duration in milliseconds of the
+ worst BPDU skewing detected."
+ ::= { stpxBpduSkewingEntry 4 }
+
+stpxBpduSkewingWorstSkewTime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the value of sysUpTime when the worst
+ BPDU skewing was detected."
+ ::= { stpxBpduSkewingEntry 5 }
+
+
+
+-- Multiple Spanning Tree Objects
+
+stpxMSTMaxInstanceNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..256)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The maximum MST (Multiple Spanning Tree) instance id,
+ that can be supported by the device for Cisco proprietary
+ implementation of the MST Protocol.
+
+ This object is deprecated and replaced by
+ stpxSMSTMaxInstanceID."
+ ::= { stpxMSTObjects 1 }
+
+stpxMSTRegionName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational MST region name."
+ ::= { stpxMSTObjects 2 }
+
+stpxMSTRegionRevision OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The operational MST region version.
+
+ This object is deprecated and replaced by
+ stpxSMSTRegionRevision."
+ ::= { stpxMSTObjects 3 }
+
+stpxMSTInstanceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxMSTInstanceEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "This table contains MST instance information with
+ one entry for an MST instance within the range of
+ 0 to the object value of stpxMSTMaxInstanceNumber.
+
+ This table is deprecated and replaced by
+ stpxSMSTInstanceTable."
+ ::= { stpxMSTObjects 4 }
+
+stpxMSTInstanceEntry OBJECT-TYPE
+ SYNTAX StpxMSTInstanceEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A conceptual row containing the MST instance
+ information."
+ INDEX { stpxMSTInstanceIndex }
+ ::= { stpxMSTInstanceTable 1 }
+
+StpxMSTInstanceEntry ::= SEQUENCE {
+ stpxMSTInstanceIndex Integer32,
+ stpxMSTInstanceVlansMapped OCTET STRING,
+ stpxMSTInstanceVlansMapped2k OCTET STRING,
+ stpxMSTInstanceVlansMapped3k OCTET STRING,
+ stpxMSTInstanceVlansMapped4k OCTET STRING,
+ stpxMSTInstanceRemainingHopCount Integer32
+}
+
+stpxMSTInstanceIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..256)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An integer that uniquely identifies an MST instance
+ within the range of 0 to the object value of
+ stpxMSTMaxInstanceNumber.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceIndex."
+ ::= { stpxMSTInstanceEntry 1 }
+
+stpxMSTInstanceVlansMapped OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 0 through 7; the second octet to VLANs 8 through
+ 15; etc. The most significant bit of each octet
+ corresponds to the lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to '1'.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceVlansMapped1k2k."
+ ::= { stpxMSTInstanceEntry 2 }
+
+stpxMSTInstanceVlansMapped2k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 1024 through 2047. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 1024 through 1031; the second octet to VLANs 1032
+ through 1039; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to '1'.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceVlansMapped1k2k."
+ ::= { stpxMSTInstanceEntry 3 }
+
+stpxMSTInstanceVlansMapped3k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 2048 through 3071. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 2048 through 2055; the second octet to VLANs 2056
+ through 2063; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to '1'.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceVlansMapped3k4k."
+ ::= { stpxMSTInstanceEntry 4 }
+
+stpxMSTInstanceVlansMapped4k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 3072 through 4095. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 3072 through 3079; the second octet to VLANs 3080
+ through 3087; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to '1'.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceVlansMapped3k4k."
+ ::= { stpxMSTInstanceEntry 5 }
+
+stpxMSTInstanceRemainingHopCount OBJECT-TYPE
+ SYNTAX Integer32 (0..40)
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The remaining hop count for this MST instance.
+
+ This object will take on value of 40 if the object value
+ of stpxSMSTInstanceRemainingHopCount is greater than 40.
+
+ This object is only instantiated when the object value of
+ stpxSpanningTreeType is mst(4).
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceRemainingHopCount."
+ ::= { stpxMSTInstanceEntry 6 }
+
+
+
+stpxMSTRegionEditBufferStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ released(1),
+ acquiredBySnmp(2),
+ acquiredByNonSnmp(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current ownership status of the unique
+ Region Config Edit Buffer.
+
+ released -- the Edit Buffer can be acquired by any of
+ the SNMP management stations.
+
+ acquiredBySnmp -- the Edit Buffer is acquired by
+ any of the SNMP management stations.
+
+ acquiredByNonSnmp -- the Edit Buffer is acquired by the
+ non-SNMP users managing the device."
+ ::= { stpxMSTObjects 5 }
+
+stpxMSTRegionEditBufferOperation OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1), -- read-only
+ acquire(2),
+ releaseWithForce(3),
+ commit(4),
+ rollBack(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the operation that is performed on the Region
+ Config Edit Buffer.
+
+ other -- none of the following operations.
+
+ acquire -- acquire the Edit Buffer. This operation can
+ only be performed when the object
+ stpxMSTRegionEditBufferStatus has the value of
+ released(1). After the successful operation of
+ this action, the stpxMSTRegionEditBufferStatus
+ will be changed to acquiredBySnmp(2).
+
+ releaseWithForce -- release the Edit Buffer acquired by
+ non-SNMP users with force and discard the changes
+ in the Edit Buffer. This operation can only be
+ performed when the object
+ stpxMSTRegionEditBufferStatus has the value of
+ acquiredByNonSnmp(2).
+
+ commit -- commit the changes in the Edit Buffer
+ and release the Edit Buffer. The successful
+ operation of this action will make the changes
+ in the Edit Buffer effective on the device.
+ This operation can only be performed when the
+ object stpxMSTRegionEditBufferStatus has the
+ value of acquiredBySnmp(3).
+
+ rollBack -- discard the changes in the Edit Buffer
+ and release the Edit Buffer. This operation can
+ only be performed when the object
+ stpxMSTRegionEditBufferStatus has the value
+ of acquiredBySnmp(3).
+
+ This object always returns other(1) when it is read."
+ ::= { stpxMSTObjects 6 }
+
+stpxMSTRegionEditName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The MST region name in the Edit Buffer.
+
+ This object is only instantiated when the
+ stpxMSTRegionEditBufferStatus has the value of
+ acquiredBySnmp(2)."
+ ::= { stpxMSTObjects 7 }
+
+stpxMSTRegionEditRevision OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The MST region version in the Edit Buffer. This object is
+ only instantiated when the stpxMSTRegionEditBufferStatus
+ has the value of acquiredBySnmp(2).
+
+ This object is deprecated and replaced by
+ stpxSMSTRegionEditRevision."
+ ::= { stpxMSTObjects 8 }
+
+stpxMSTInstanceEditTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxMSTInstanceEditEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "This table contains MST instance information in the
+ Edit Buffer with one entry for each MST
+ instance numbered from 0 to stpxMSTMaxInstanceNumber.
+
+ This table is only instantiated when the
+ stpxMSTRegionEditBufferStatus has the value of
+ acquiredBySnmp(2).
+
+ This table is deprecated and replaced by
+ stpxSMSTInstanceEditTable."
+ ::= { stpxMSTObjects 9 }
+
+stpxMSTInstanceEditEntry OBJECT-TYPE
+ SYNTAX StpxMSTInstanceEditEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A conceptual row containing MST instance information
+ in the Edit Buffer."
+ INDEX { stpxMSTInstanceEditIndex }
+ ::= { stpxMSTInstanceEditTable 1 }
+
+StpxMSTInstanceEditEntry ::= SEQUENCE {
+ stpxMSTInstanceEditIndex Integer32,
+ stpxMSTInstanceEditVlansMap OCTET STRING,
+ stpxMSTInstanceEditVlansMap2k OCTET STRING,
+ stpxMSTInstanceEditVlansMap3k OCTET STRING,
+ stpxMSTInstanceEditVlansMap4k OCTET STRING
+}
+
+stpxMSTInstanceEditIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..256)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An integer that uniquely identifies an MST instance
+ from 0 to the object value of stpxMSTMaxInstanceNumber.
+
+ The instances of this table entry with
+ stpxMSTInstanceEditIndex of zero can not be
+ modified.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceEditIndex."
+ ::= { stpxMSTInstanceEditEntry 1 }
+
+stpxMSTInstanceEditVlansMap OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 0 through 7; the second octet to VLANs 8 through
+ 15; etc. The most significant bit of each octet
+ corresponds to the lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to
+ '1'. Each VLAN can only be mapped to one unique MST
+ instance in the range from 1 to stpxMSTMaxInstanceNumber.
+ If the bit corresponding to a VLAN is changed from '1'
+ to '0', then that VLAN will be automatically mapped to
+ MST instance 0 by the device.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceEditVlansMap1k2k."
+ ::= { stpxMSTInstanceEditEntry 2 }
+
+stpxMSTInstanceEditVlansMap2k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 1024 through 2047. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 1024 through 1031; the second octet to VLANs 1032
+ through 1039; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to
+ '1'. Each VLAN can only be mapped to one unique MST
+ instance in the range from 1 to stpxMSTMaxInstanceNumber.
+ If the bit corresponding to a VLAN is changed from '1'
+ to '0', then that VLAN will be automatically mapped to
+ MST instance 0 by the device.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceEditVlansMap1k2k."
+ ::= { stpxMSTInstanceEditEntry 3 }
+
+stpxMSTInstanceEditVlansMap3k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 2048 through 3071. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 2048 through 2055; the second octet to VLANs 2056
+ through 2063; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to
+ '1'. Each VLAN can only be mapped to one unique MST
+ instance in the range from 1 to stpxMSTMaxInstanceNumber.
+ If the bit corresponding to a VLAN is changed from '1'
+ to '0', then that VLAN will be automatically mapped to
+ MST instance 0 by the device.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceEditVlansMap3k4k."
+ ::= { stpxMSTInstanceEditEntry 4 }
+
+stpxMSTInstanceEditVlansMap4k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 3072 through 4095. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 3072 through 3079; the second octet to VLANs 3080
+ through 3087; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to
+ '1'. Each VLAN can only be mapped to one unique MST
+ instance in the range from 1 to stpxMSTMaxInstanceNumber.
+ If the bit corresponding to a VLAN is changed from '1'
+ to '0', then that VLAN will be automatically mapped to
+ MST instance 0 by the device.
+
+ This object is deprecated and replaced by
+ stpxSMSTInstanceEditVlansMap3k4k."
+ ::= { stpxMSTInstanceEditEntry 5 }
+
+
+
+stpxPreferredMSTInstancesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxPreferredMSTInstancesEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "The table containing indications of which MST instances
+ are preferred on which trunk ports. The preferred
+ MST instances on a trunk port have a lower Path Cost value
+ compared with the MST instances on the trunk not in the
+ preferred list."
+ ::= { stpxMSTObjects 10 }
+
+stpxPreferredMSTInstancesEntry OBJECT-TYPE
+ SYNTAX StpxPreferredMSTInstancesEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An entry indicating which MST instances are preferred on
+ a specific trunk port."
+ AUGMENTS { vlanTrunkPortEntry }
+ ::= { stpxPreferredMSTInstancesTable 1 }
+
+StpxPreferredMSTInstancesEntry ::= SEQUENCE {
+ stpxPreferredMSTInstancesMap OCTET STRING
+}
+
+stpxPreferredMSTInstancesMap OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (1..32))
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "A string of octets containing one bit per MST instances
+ on this trunk port. The first octet corresponds to MST
+ instances of 0 through 7; the second octet to MST instances
+ 8 through 15; etc. The most significant bit of each octet
+ corresponds to the lowest MST instance value in that octet.
+ The number of bits for this mib object will be determined
+ by the value of stpxMSTMaxInstanceNumber.
+
+ For each instance, if it is preferred on this trunk port,
+ then the bit corresponding to that instance is set to '1'."
+ ::= { stpxPreferredMSTInstancesEntry 1 }
+
+
+
+stpxMSTPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxMSTPortEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A table containing port information for the MST
+ Protocol on all the bridge ports existing on the
+ system."
+ ::= { stpxMSTObjects 11 }
+
+stpxMSTPortEntry OBJECT-TYPE
+ SYNTAX StpxMSTPortEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An entry with port information for the MST Protocol
+ on a bridge port."
+ INDEX { stpxMSTPortIndex }
+ ::= { stpxMSTPortTable 1 }
+
+StpxMSTPortEntry ::= SEQUENCE {
+ stpxMSTPortIndex Integer32,
+ stpxMSTPortAdminLinkType INTEGER,
+ stpxMSTPortOperLinkType INTEGER,
+ stpxMSTPortProtocolMigration TruthValue,
+ stpxMSTPortStatus BITS
+}
+
+stpxMSTPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxMSTPortEntry 1 }
+
+stpxMSTPortAdminLinkType OBJECT-TYPE
+ SYNTAX INTEGER {
+ pointToPoint(1),
+ shared(2),
+ auto(3)
+ }
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates the administrative link type configuration of
+ a bridge port for the MST protocol.
+
+ pointToPoint -- the port is administratively configured to
+ be connected to a point-to-point link.
+
+ shared -- the port is administratively configured to be
+ connected to a shared medium.
+
+ auto -- the administrative configuration of the port's
+ link type depends on link duplex of the port.
+ If the port link is full-duplex, the administrative
+ link type configuration on this port will be taken
+ as pointTopoint(1). If the port link is half-duplex,
+ the administrative link type configuration on this
+ port will be taken as shared(2).
+
+ This configuration of this object only takes effect when the
+ stpxSpanningTreeType is mst(4) or rapidPvstPlus(5).
+ stpxMSTPortAdminLinkType is deprecated and replaced
+ with stpxRSTPPortAdminLinkType."
+ DEFVAL { auto }
+ ::= { stpxMSTPortEntry 2 }
+
+stpxMSTPortOperLinkType OBJECT-TYPE
+ SYNTAX INTEGER {
+ pointToPoint(1),
+ shared(2),
+ other(3)
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates the operational link type of a bridge port
+ for the MST protocol.
+
+ pointToPoint -- the port is operationally connected to
+ a point-to-point link.
+
+ shared -- the port is operationally connected to
+ a shared medium.
+
+ other -- none of the above.
+
+ This object is only instantiated when the object value of
+ stpxSpanningTreeType is mst(4). stpxMSTPortOperLinkType
+ is deprecated and replaced with stpxRSTPPortOperLinkType."
+ ::= { stpxMSTPortEntry 3 }
+
+stpxMSTPortProtocolMigration OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The protocol migration control on this port. When the
+ object value of stpxSpanningTreeType is mst(4) or
+ rapidPvstPlus(5), setting true(1) to this object forces
+ the device to try using version 2 BPDUs on this port.
+ When the object value of stpxSpanningTreeType is neither
+ mst(4) nor rapidPvstPlus(5), setting true(1) to this
+ object has no effect. Setting false(2) to this object has
+ no effect. This object always returns false(2) when read.
+ stpxMSTPortProtocolMigration is deprecated and
+ replaced with stpxRSTPPortProtocolMigration."
+ REFERENCE "IEEE 802.1w clause 14.8.2.4, 17.26."
+ ::= { stpxMSTPortEntry 4 }
+
+stpxMSTPortStatus OBJECT-TYPE
+ SYNTAX BITS {
+ edge(0),
+ boundary(1),
+ pvst(2),
+ stp(3)
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates the operational status of the port for the
+ MST protocol.
+
+ edge -- this port is an edge port for the MST region.
+
+ boundary -- this port is a boundary port for the
+ MST region.
+
+ pvst -- this port is connected to a PVST/PVST+ bridge.
+
+ stp -- this port is connected to a Single Spanning
+ Tree bridge.
+
+ This object is only instantiated when the object value
+ of stpxSpanningTreeType is mst(4).
+
+ This object is deprecated and replaced by
+ stpxSMSTPortStatus."
+ ::= { stpxMSTPortEntry 5 }
+
+
+
+stpxMSTPortRoleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxMSTPortRoleEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "A table containing a list of the bridge ports for a
+ particular MST instance. This table is only instantiated
+ when the stpxSpanningTreeType is mst(4).
+
+ This table is deprecated and replaced with
+ stpxRSTPPortRoleTable."
+ ::= { stpxMSTObjects 12 }
+
+stpxMSTPortRoleEntry OBJECT-TYPE
+ SYNTAX StpxMSTPortRoleEntry
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "An entry containing the port role information for the MST
+ protocol on a port for a particular MST instance existing
+ on the system."
+ INDEX {
+ stpxMSTPortRoleInstanceIndex,
+ stpxMSTPortRolePortIndex
+ }
+ ::= { stpxMSTPortRoleTable 1 }
+
+StpxMSTPortRoleEntry ::= SEQUENCE {
+ stpxMSTPortRoleInstanceIndex Integer32,
+ stpxMSTPortRolePortIndex Integer32,
+ stpxMSTPortRoleValue INTEGER
+}
+
+stpxMSTPortRoleInstanceIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..256)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "The MST instance id within the range of 0 to
+ stpxMSTMaxInstanceNumber."
+ ::= { stpxMSTPortRoleEntry 1 }
+
+stpxMSTPortRolePortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxMSTPortRoleEntry 2 }
+
+stpxMSTPortRoleValue OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ root(2),
+ designated(3),
+ alternate(4),
+ backUp(5),
+ boundary(6),
+ master(7)
+ }
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates the port role on a particular MST instance
+ for the MST protocol.
+
+ disabled -- this port has no role on this MST instance.
+
+ root -- this port has the role of root port on this MST
+ instance.
+
+ designated -- this port has the role of designated
+ port on this MST instance.
+
+ alternate -- this port has the role of alternate port
+ on this MST instance.
+
+ backUp -- this port has the role of backup port on this
+ MST instance.
+
+ boundary -- this port has the role of boundary port on
+ this MST instance.
+
+ master -- this port has the role of master port on
+ this MST instance."
+ ::= { stpxMSTPortRoleEntry 3 }
+
+
+
+stpxMSTMaxHopCount OBJECT-TYPE
+ SYNTAX Integer32 (1..40)
+ MAX-ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The maximum number of hops for the MST region.
+
+ This object will take on value of 40 if the object value
+ of stpxSMSTMaxHopCount is greater than 40.
+
+ This object is deprecated and replaced by
+ stpxSMSTMaxHopCount."
+ DEFVAL { 20 }
+ ::= { stpxMSTObjects 13 }
+-- Rapid Spanning Tree Protocol Objects
+
+stpxRSTPPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxRSTPPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing port information for the RSTP
+ Protocol on all the bridge ports existing in the
+ system."
+ ::= { stpxRSTPObjects 1 }
+
+stpxRSTPPortEntry OBJECT-TYPE
+ SYNTAX StpxRSTPPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry with port information for the RSTP Protocol
+ on a bridge port."
+ INDEX { stpxRSTPPortIndex }
+ ::= { stpxRSTPPortTable 1 }
+
+StpxRSTPPortEntry ::= SEQUENCE {
+ stpxRSTPPortIndex Integer32,
+ stpxRSTPPortAdminLinkType INTEGER,
+ stpxRSTPPortOperLinkType INTEGER,
+ stpxRSTPPortProtocolMigration TruthValue
+}
+
+stpxRSTPPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxRSTPPortEntry 1 }
+
+stpxRSTPPortAdminLinkType OBJECT-TYPE
+ SYNTAX INTEGER {
+ pointToPoint(1),
+ shared(2),
+ auto(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the administrative link type configuration of
+ a bridge port for the RSTP protocol.
+
+ pointToPoint -- the port is administratively configured to
+ be connected to a point-to-point link.
+
+ shared -- the port is administratively configured to be
+ connected to a shared medium.
+
+ auto -- the administrative configuration of the port's
+ link type depends on link duplex of the port.
+ If the port link is full-duplex, the administrative
+ link type configuration on this port will be taken
+ as pointTopoint(1). If the port link is half-duplex,
+ the administrative link type configuration on this
+ port will be taken as shared(2).
+
+ This configuration of this object only takes effect when the
+ stpxSpanningTreeType is mst(4) or rapidPvstPlus(5)."
+ DEFVAL { auto }
+ ::= { stpxRSTPPortEntry 2 }
+
+stpxRSTPPortOperLinkType OBJECT-TYPE
+ SYNTAX INTEGER {
+ pointToPoint(1),
+ shared(2),
+ other(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the operational link type of a bridge port
+ for the RSTP protocol.
+
+ pointToPoint -- the port is operationally connected to
+ a point-to-point link.
+
+ shared -- the port is operationally connected to
+ a shared medium.
+
+ other -- none of the above.
+
+ This object is only instantiated when the object value of
+ stpxSpanningTreeType is mst(4) or rapidPvstPlus(5)."
+ ::= { stpxRSTPPortEntry 3 }
+
+stpxRSTPPortProtocolMigration OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The protocol migration control on this port. When the
+ object value of stpxSpanningTreeType is mst(4) or
+ rapidPvstPlus(5), setting true(1) to this object forces
+ the device to try using version 2 BPDUs on this port.
+ When the object value of stpxSpanningTreeType is neither
+ mst(4) nor rapidPvstPlus(5), setting true(1) to
+ this object has no effect. Setting false(2) to this
+ object has no effect. This object always returns
+ false(2) when read."
+ REFERENCE "IEEE 802.1w clause 14.8.2.4, 17.26."
+ ::= { stpxRSTPPortEntry 4 }
+
+
+
+stpxRSTPPortRoleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxRSTPPortRoleEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports for a
+ particular Spanning Tree instance. This table is
+ only instantiated when the stpxSpanningTreeType is mst(4)
+ or rapidPvstPlus(5)."
+ ::= { stpxRSTPObjects 2 }
+
+stpxRSTPPortRoleEntry OBJECT-TYPE
+ SYNTAX StpxRSTPPortRoleEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing the port role information for the RSTP
+ protocol on a port for a particular Spanning Tree instance."
+ INDEX {
+ stpxRSTPPortRoleInstanceIndex,
+ stpxRSTPPortRolePortIndex
+ }
+ ::= { stpxRSTPPortRoleTable 1 }
+
+StpxRSTPPortRoleEntry ::= SEQUENCE {
+ stpxRSTPPortRoleInstanceIndex Integer32,
+ stpxRSTPPortRolePortIndex Integer32,
+ stpxRSTPPortRoleValue INTEGER
+}
+
+stpxRSTPPortRoleInstanceIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..4095)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Spanning Tree instance id, it can either be a
+ VLAN number if the stpxSpanningTreeType is rapidPvstPlus(5)
+ or an MST instance id if the stpxSpanningTreeType is mst(4)."
+ ::= { stpxRSTPPortRoleEntry 1 }
+
+stpxRSTPPortRolePortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxRSTPPortRoleEntry 2 }
+
+stpxRSTPPortRoleValue OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ root(2),
+ designated(3),
+ alternate(4),
+ backUp(5),
+ boundary(6),
+ master(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the port role on a particular Spanning Tree
+ instance for the RSTP protocol.
+
+ disabled -- this port has no role in this Spanning
+ Tree instance.
+
+ root -- this port has the role of root port in this
+ Spanning Tree instance.
+
+ designated -- this port has the role of designated
+ port in this Spanning Tree instance.
+
+ alternate -- this port has the role of alternate port
+ in this Spanning Tree instance.
+
+ backUp -- this port has the role of backup port in this
+ Spanning Tree instance.
+
+ boundary -- this port has the role of boundary port in
+ this Spanning Tree instance.
+
+ master -- this port has the role of master port in
+ this Spanning Tree instance.
+
+ This object could have a value of 'boundary' or 'master'
+ only when the object value of stpxSpanningTreeType is mst(4)."
+ ::= { stpxRSTPPortRoleEntry 3 }
+
+
+
+stpxRSTPTransmitHoldCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Transmit Hold Count."
+ ::= { stpxRSTPObjects 3 }
+-- Rapid PVST+ Objects
+
+stpxRPVSTPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxRPVSTPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing a list of the bridge ports
+ for a particular Spanning Tree Instance.
+ This table is only instantiated when the object value
+ of stpxSpanningTreeType is rapidPvstPlus(5)."
+ ::= { stpxRPVSTObjects 1 }
+
+stpxRPVSTPortEntry OBJECT-TYPE
+ SYNTAX StpxRPVSTPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry with port status information on a
+ bridge port for a particular Spanning Tree
+ Instance."
+ INDEX {
+ stpxRPVSTPortVlanIndex,
+ stpxRPVSTPortIndex
+ }
+ ::= { stpxRPVSTPortTable 1 }
+
+StpxRPVSTPortEntry ::= SEQUENCE {
+ stpxRPVSTPortVlanIndex VlanIndex,
+ stpxRPVSTPortIndex Integer32,
+ stpxRPVSTPortStatus BITS
+}
+
+stpxRPVSTPortVlanIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN id of the VLAN."
+ ::= { stpxRPVSTPortEntry 1 }
+
+stpxRPVSTPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxRPVSTPortEntry 2 }
+
+stpxRPVSTPortStatus OBJECT-TYPE
+ SYNTAX BITS {
+ edge(0),
+ unused1(1),
+ unused2(2),
+ stp(3),
+ dispute(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the operational status of the port for the
+ Rapid PVST+ protocol.
+
+ edge -- this port is an edge port for the RST region.
+
+ unused1 -- unused bit 1.
+
+ unused2 -- unused bit 2.
+
+ stp -- this port is connected to a Single Spanning
+ Tree/PVST+ bridge.
+
+ dispute -- this port, as a designated port, received an
+ inferior BPDU with a designated role and the
+ learning bit being set."
+ ::= { stpxRPVSTPortEntry 3 }
+
+
+
+-- Standard Multiple Spanning Tree Objects.
+-- This group of objects is for the management
+-- of IEEE Multiple Spanning Tree, i.e., Standard MST
+-- (SMST). Objects in this group replace some of the
+-- objects in stpxMSTObjects which are for the the
+-- managment of the Cisco proprietary implementation
+-- of the Multiple Spanning Tree (MST).
+
+stpxSMSTMaxInstances OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of MST instances that can be
+ supported by the device for IEEE MST."
+ ::= { stpxSMSTObjects 1 }
+
+stpxSMSTMaxInstanceID OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum MST instance ID that can be supported
+ by the device for IEEE MST."
+ ::= { stpxSMSTObjects 2 }
+
+stpxSMSTRegionRevision OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational region version for IEEE MST."
+ ::= { stpxSMSTObjects 3 }
+
+stpxSMSTRegionEditRevision OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The MST region version in the Edit Buffer for IEEE
+ MST.
+
+ This object is only instantiated when the
+ stpxMSTRegionEditBufferStatus has the value of
+ acquiredBySnmp(2)."
+ ::= { stpxSMSTObjects 4 }
+
+stpxSMSTInstanceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxSMSTInstanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains MST instance information
+ for IEEE MST."
+ ::= { stpxSMSTObjects 5 }
+
+stpxSMSTInstanceEntry OBJECT-TYPE
+ SYNTAX StpxSMSTInstanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing the MST instance
+ information for IEEE MST."
+ INDEX { stpxSMSTInstanceIndex }
+ ::= { stpxSMSTInstanceTable 1 }
+
+StpxSMSTInstanceEntry ::= SEQUENCE {
+ stpxSMSTInstanceIndex Unsigned32,
+ stpxSMSTInstanceVlansMapped1k2k OCTET STRING,
+ stpxSMSTInstanceVlansMapped3k4k OCTET STRING,
+ stpxSMSTInstanceRemainingHopCount Integer32,
+ stpxSMSTInstanceCISTRegionalRoot OCTET STRING,
+ stpxSMSTInstanceCISTIntRootCost Unsigned32
+}
+
+stpxSMSTInstanceIndex OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The MST instance ID, the value of which is in the range
+ from 0 to stpxSMSTMaxInstanceID."
+ ::= { stpxSMSTInstanceEntry 1 }
+
+stpxSMSTInstanceVlansMapped1k2k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 0 through 2047. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 0 through 7; the second octet to VLANs 8 through
+ 15; etc. The most significant bit of each octet
+ corresponds to the lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to '1'.
+ If the length of this string is less than 256 octets,
+ any 'missing' octets are assumed to contain the value
+ of zero."
+ ::= { stpxSMSTInstanceEntry 2 }
+
+stpxSMSTInstanceVlansMapped3k4k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 2048 through 4095. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 2048 through 2055; the second octet to VLANs 2056
+ through 2063; etc. The most significant bit of each
+ octet corresponds to the lowest value VlanIndex in that
+ octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to '1'.
+ If the length of this string is less than 256 octets,
+ any 'missing' octets are assumed to contain the value
+ of zero."
+ ::= { stpxSMSTInstanceEntry 3 }
+
+stpxSMSTInstanceRemainingHopCount OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remaining hop count for this MST instance. If this object
+ value is not applicable on an MST instance, then the value
+ retrieved for this object for that MST instance will be -1.
+
+ This object is only instantiated when the object value of
+ stpxSpanningTreeType is mst(4)."
+ ::= { stpxSMSTInstanceEntry 4 }
+
+stpxSMSTInstanceCISTRegionalRoot OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the Bridge Identifier (refer to BridgeId
+ defined in BRIDGE-MIB) of CIST (Common and Internal
+ Spanning Tree) Regional Root for the MST region.
+
+ This object is only instantiated when the object value of
+ stpxSpanningTreeType is mst(4) and stpxSMSTInstanceIndex
+ is 0."
+ REFERENCE "IEEE 802.1S-2002: Section 13.9."
+ ::= { stpxSMSTInstanceEntry 5 }
+
+stpxSMSTInstanceCISTIntRootCost OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the CIST Internal Root Path Cost, i.e., the
+ path cost to the CIST Regional Root as specified by the
+ corresponding stpxSMSTInstanceCISTRegionalRoot for the
+ MST region.
+
+ This object is only instantiated when the object value of
+ stpxSpanningTreeType is mst(4) and stpxSMSTInstanceIndex
+ is 0."
+ REFERENCE "IEEE 802.1S-2002: Section 13.9."
+ ::= { stpxSMSTInstanceEntry 6 }
+
+
+
+stpxSMSTInstanceEditTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxSMSTInstanceEditEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains MST instance information in the
+ Edit Buffer.
+
+ This table is only instantiated when the object value
+ of stpxMSTRegionEditBufferStatus has the value of
+ acquiredBySnmp(2)."
+ ::= { stpxSMSTObjects 6 }
+
+stpxSMSTInstanceEditEntry OBJECT-TYPE
+ SYNTAX StpxSMSTInstanceEditEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row containing MST instance information
+ in the Edit Buffer.
+
+ The total number of entries in this table has to be
+ less than or equal to the object value of stpxSMSTMaxInstances."
+ INDEX { stpxSMSTInstanceEditIndex }
+ ::= { stpxSMSTInstanceEditTable 1 }
+
+StpxSMSTInstanceEditEntry ::= SEQUENCE {
+ stpxSMSTInstanceEditIndex Unsigned32,
+ stpxSMSTInstanceEditVlansMap1k2k OCTET STRING,
+ stpxSMSTInstanceEditVlansMap3k4k OCTET STRING,
+ stpxSMSTInstanceEditRowStatus RowStatus
+}
+
+stpxSMSTInstanceEditIndex OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The MST instance ID, the value of which is in the range from
+ 0 to stpxSMSTMaxInstanceID.
+
+ The instances of this table entry with
+ stpxSMSTInstanceEditIndex of zero is automatically
+ created by the device and can not modified."
+ ::= { stpxSMSTInstanceEditEntry 1 }
+
+stpxSMSTInstanceEditVlansMap1k2k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 0 through 2047. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 0 through 7; the second octet to VLANs 8 through
+ 15; etc. The most significant bit of each octet
+ corresponds to the lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to
+ '1'. Each VLAN can only be mapped to one unique MST
+ instance with the range from 0 to stpxSMSTMaxInstanceNumber.
+ If the bit corresponding to a VLAN is changed from '1'
+ to '0', then that VLAN will be automatically mapped to
+ SMST instance 0 by the device. If the bit corresponding
+ to a VLAN is changed from '0' to '1', then that VLAN will
+ be automatically removed from the MST instance this VLAN was
+ previously mapped to. If the length of this string is
+ less than 256 octets, any 'missing' octets are assumed to
+ contain the value of zero."
+ ::= { stpxSMSTInstanceEditEntry 2 }
+
+stpxSMSTInstanceEditVlansMap3k4k OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A string of octets containing one bit per VLAN for
+ VLANS with VlanIndex values of 2048 through 4095. The
+ first octet corresponds to VLANs with VlanIndex values
+ of 2048 through 2055; the second octet to VLANs 2056 through
+ 2063; etc. The most significant bit of each octet
+ corresponds to the lowest value VlanIndex in that octet.
+
+ For each VLAN, if it is mapped to this MST instance,
+ then the bit corresponding to that VLAN is set to
+ '1'. Each VLAN can only be mapped to one unique MST
+ instance with the range from 0 to stpxSMSTMaxInstanceNumber.
+ If the bit corresponding to a VLAN is changed from '1'
+ to '0', then that VLAN will be automatically mapped to
+ SMST instance 0 by the device. If the bit corresponding
+ to a VLAN is changed from '0' to '1', then that VLAN will
+ be automatically removed from the MST instance this VLAN was
+ previously mapped to. If the length of this string is
+ less than 256 octets, any 'missing' octets are assumed to
+ contain the value of zero."
+ ::= { stpxSMSTInstanceEditEntry 3 }
+
+stpxSMSTInstanceEditRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object controls the creation and deletion of a row
+ in stpxSMSTInstanceEditTable.
+
+ When creating an entry in this table, 'createAndGo' method
+ is used and the value of this object is set to 'active'.
+ Deactivation of an 'active' entry is not allowed. When
+ deleting an entry in this table, 'destroy' method is used.
+ Once a row becomes active, value in any other column
+ within such a row may be modified. When a row is active,
+ setting the instance of stpxSMSTInstanceEditVlansMap1k2k
+ stpxSMSTInstanceEditVlansMap3k4k for the same MST instance
+ both to the value of zero length can not be allowed."
+ ::= { stpxSMSTInstanceEditEntry 4 }
+
+
+
+stpxSMSTPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StpxSMSTPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing port information for the MST
+ Protocol on all the bridge ports existing on the
+ system.
+
+ This table is only instantiated when the object
+ value of stpxSpanningTreeType is mst(4)"
+ ::= { stpxSMSTObjects 7 }
+
+stpxSMSTPortEntry OBJECT-TYPE
+ SYNTAX StpxSMSTPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry with port information for the MST protocol
+ on a bridge port."
+ INDEX { stpxSMSTPortIndex }
+ ::= { stpxSMSTPortTable 1 }
+
+StpxSMSTPortEntry ::= SEQUENCE {
+ stpxSMSTPortIndex Integer32,
+ stpxSMSTPortStatus BITS,
+ stpxSMSTPortAdminHelloTime Unsigned32,
+ stpxSMSTPortConfigedHelloTime Unsigned32,
+ stpxSMSTPortOperHelloTime Integer32,
+ stpxSMSTPortAdminMSTMode INTEGER,
+ stpxSMSTPortOperMSTMode INTEGER
+}
+
+stpxSMSTPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The value of dot1dBasePort (i.e. dot1dBridge.1.4)
+ for the bridge port."
+ REFERENCE "dot1dBasePort is defined in RFC1493."
+ ::= { stpxSMSTPortEntry 1 }
+
+stpxSMSTPortStatus OBJECT-TYPE
+ SYNTAX BITS {
+ edge(0),
+ boundary(1),
+ pvst(2),
+ stp(3),
+ dispute(4),
+ rstp(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the operational status of the port for the
+ MST protocol.
+
+ edge -- this port is an edge port for the MST region.
+
+ boundary -- this port is a boundary port for the
+ MST region.
+
+ pvst -- this port is connected to a PVST/PVST+ bridge.
+
+ stp -- this port is connected to a Single Spanning
+ Tree bridge.
+
+ dispute -- this port, as a designated port, received an
+ inferior BPDU with a designated role and the
+ learning bit being set.
+
+ rstp -- this port is connected to a RSTP bridge or an
+ MST bridge in a different MST region."
+ ::= { stpxSMSTPortEntry 2 }
+
+stpxSMSTPortAdminHelloTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "hundredth of seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The adminitratively configured hello time in hundredth
+ of seconds on a port for IEEE MST. The granularity
+ of this timer is 1 second. An agent may return a badValue
+ error if a set is attempted to a value which is not a
+ whole number of seconds. This object value of zero
+ means the hello time is not specifically configured on
+ this port and object value of stpxSMSTPortConfigedHelloTime
+ retrieved for this port will take on the value of
+ dot1dStpBridgeHelloTime defined in BRIDGE-MIB."
+ ::= { stpxSMSTPortEntry 3 }
+
+stpxSMSTPortConfigedHelloTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "hundredth of seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the effective configuration of the hello time on
+ a port."
+ ::= { stpxSMSTPortEntry 4 }
+
+stpxSMSTPortOperHelloTime OBJECT-TYPE
+ SYNTAX Integer32 (-1..2147483647)
+ UNITS "hundredth of seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational hello time in hundredth of seconds on a
+ port for IEEE MST. If this object value is not
+ applicable on a port, then the value retrieved on that
+ port will be -1."
+ ::= { stpxSMSTPortEntry 5 }
+
+stpxSMSTPortAdminMSTMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ preStandard(1),
+ auto(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The desired MST mode of this port.
+
+ preStandard -- this port is administratively configured to
+ transmit pre-standard, i.e. pre IEEE MST, BPDUs.
+
+ auto -- the BPDU transmission mode of this port is based
+ on automatic detection of neighbor ports."
+ ::= { stpxSMSTPortEntry 6 }
+
+stpxSMSTPortOperMSTMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ preStandard(2),
+ standard(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the current operational MST mode of this port.
+
+ unknown -- the operational mode is currently unknown.
+
+ preStandard -- this port is currently operating in
+ pre-standard MSTP BPDU transmission mode.
+
+ standard -- this port is currently operating in IEEE MST
+ BPDU transmission mode."
+ ::= { stpxSMSTPortEntry 7 }
+
+
+
+stpxSMSTMaxHopCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of hops for the IEEE MST region."
+ ::= { stpxSMSTObjects 8 }
+
+stpxSMSTConfigDigest OBJECT-TYPE
+ SYNTAX StpxMSTConfigurationDigest
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IEEE MST region configuration digest."
+ REFERENCE "IEEE 802.1Q-2003 Section 13.7."
+ ::= { stpxSMSTObjects 9 }
+
+stpxSMSTConfigPreStandardDigest OBJECT-TYPE
+ SYNTAX StpxMSTConfigurationDigest
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The pre-standard MST region configuration digest."
+ ::= { stpxSMSTObjects 10 }
+
+stpxL2GatewayDomainId OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies layer2 gateway spanning tree
+ domain identifier."
+ ::= { stpxL2GatewayObjects 1 }
+-- Notifications
+
+stpxNotificationsPrefix OBJECT IDENTIFIER
+ ::= { stpxNotifications 0 }
+
+
+stpxInconsistencyUpdate NOTIFICATION-TYPE
+ OBJECTS { stpxInconsistentState }
+ STATUS current
+ DESCRIPTION
+ "A stpxInconsistencyUpdate notification is sent by a
+ bridge when an instance of stpxInconsistentState is
+ created or destroyed. That is, when an inconsistency is
+ discovered in the VLAN's Spanning Tree for a particular
+ port, or when such an inconsistency disappears. Note
+ that the trap is not sent if the port transitions between
+ different types of inconsistency.
+
+ The stpxInconsistentState value indicates the type of
+ inconsistency which now exists/no longer exists for the
+ relevant VLAN on the relevant port."
+ ::= { stpxNotificationsPrefix 1 }
+
+stpxRootInconsistencyUpdate NOTIFICATION-TYPE
+ OBJECTS {
+ stpxRootInconsistencyState,
+ stpxSpanningTreeType
+ }
+ STATUS current
+ DESCRIPTION
+ "A stpxRootInconsistencyUpdate notification is sent by a
+ bridge when an instance of stpxRootInconsistencyState
+ is created or destroyed. That is, when an
+ root-inconsistency is discovered in the VLAN's or
+ instance's Spanning Tree for a particular port, or when
+ such an root-inconsistency disappears. For creation, the
+ value of stpxRootInconsistencyState in the notification is
+ true(1); for deletion, the value is false(2).
+
+ The object value of stpxSpanningTreeType indicates
+ which Spanning Tree protocol is running when an instance
+ of stpxRootInconsistencyState is created or destroyed."
+ ::= { stpxNotificationsPrefix 2 }
+
+stpxLoopInconsistencyUpdate NOTIFICATION-TYPE
+ OBJECTS {
+ stpxLoopInconsistencyState,
+ stpxSpanningTreeType
+ }
+ STATUS current
+ DESCRIPTION
+ "A stpxLoopInconsistencyUpdate notification is sent by a
+ bridge when an instance of stpxLoopInconsistencyState
+ is created or destroyed. That is, when an
+ loop-inconsistency is discovered in the VLAN's or
+ instance's Spanning Tree for a particular port, or when
+ such an loop-inconsistency disappears. For creation,
+ the value of stpxLoopInconsistencyState in the
+ notification is true(1); for deletion, the value is
+ false(2).
+
+ The object value of stpxSpanningTreeType indicates
+ which Spanning Tree protocol is running when an instance
+ of stpxLoopInconsistencyState is created or
+ destroyed."
+ ::= { stpxNotificationsPrefix 3 }
+
+stpxMstInconsistencyUpdate NOTIFICATION-TYPE
+ OBJECTS { stpxMstInconsistencyState }
+ STATUS current
+ DESCRIPTION
+ "A stpxMstInconsistencyUpdate notification is sent by a
+ bridge when an instance of stpxMstInconsistencyState
+ is created or destroyed. That is, when an
+ type-inconsistency is discovered in instance's Spanning
+ Tree for a particular port, or when such a type-inconsistency
+ disappears.
+
+ Note that the trap is not sent if the port transitions between
+ different types of inconsistency.
+
+ The stpxMstInconsistentState value indicates the type of
+ inconsistency which now exists/no longer exists for the
+ relevant instance on the relevant port."
+ ::= { stpxNotificationsPrefix 4 }
+-- conformance information
+
+stpxMIBConformance OBJECT IDENTIFIER
+ ::= { ciscoStpExtensionsMIB 3 }
+
+stpxMIBCompliances OBJECT IDENTIFIER
+ ::= { stpxMIBConformance 1 }
+
+stpxMIBGroups OBJECT IDENTIFIER
+ ::= { stpxMIBConformance 2 }
+
+
+-- compliance statements
+
+stpxMIBCompliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+ ::= { stpxMIBCompliances 1 }
+
+stpxMIBCompliance2 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+ ::= { stpxMIBCompliances 2 }
+
+stpxMIBCompliance3 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+ ::= { stpxMIBCompliances 3 }
+
+stpxMIBCompliance4 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+ ::= { stpxMIBCompliances 4 }
+
+stpxMIBCompliance5 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxFastStartGroup
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+ ::= { stpxMIBCompliances 5 }
+
+stpxMIBCompliance6 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxSstpGroup
+ DESCRIPTION
+ "This group is optional for implementations of
+ Cisco's Shared Spanning Tree Protocol (SSTP)."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxBpduSkewingGroup
+ DESCRIPTION
+ "This is an optional group for implementations of
+ Spanning Tree BPDU Skewing feature."
+
+ GROUP stpxFastStartGroup2
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+
+ GROUP stpxLoopGuardGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxMSTGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Multiple Spanning Tree Protocol feature."
+
+ GROUP stpxPreferredMSTInstancesGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of Preferred MST Instance Map feature."
+ ::= { stpxMIBCompliances 6 }
+
+stpxMIBCompliance7 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxSstpGroup
+ DESCRIPTION
+ "This group is optional for implementations of
+ Cisco's Shared Spanning Tree Protocol (SSTP)."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxBpduSkewingGroup
+ DESCRIPTION
+ "This is an optional group for implementations of
+ Spanning Tree BPDU Skewing feature."
+
+ GROUP stpxFastStartGroup2
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+
+ GROUP stpxLoopGuardGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxPreferredMSTInstancesGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of Preferred MST Instance Map feature."
+
+ GROUP stpxFastStartGroup3
+ DESCRIPTION
+ "This group is optional for implementations
+ of Bpdu Guard and Bpdu Filter feature."
+
+ GROUP stpxUplinkGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of UplinkFast feature."
+
+ GROUP stpxBackboneGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of BackboneFast feature."
+
+ GROUP stpxMSTGroup2
+ DESCRIPTION
+ "This group is optional for implementation of
+ Multiple Spanning Tree Protocol feature."
+
+ GROUP stpxRSTPGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRPVSTGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid PVST+ feature."
+ ::= { stpxMIBCompliances 7 }
+
+stpxMIBCompliance8 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxSstpGroup
+ DESCRIPTION
+ "This group is optional for implementations of
+ Cisco's Shared Spanning Tree Protocol (SSTP)."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxBpduSkewingGroup
+ DESCRIPTION
+ "This is an optional group for implementations of
+ Spanning Tree BPDU Skewing feature."
+
+ GROUP stpxFastStartGroup2
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+
+ GROUP stpxLoopGuardGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxPreferredMSTInstancesGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of Preferred MST Instance Map feature."
+
+ GROUP stpxFastStartGroup3
+ DESCRIPTION
+ "This group is optional for implementations
+ of Bpdu Guard and Bpdu Filter feature."
+
+ GROUP stpxUplinkGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of UplinkFast feature."
+
+ GROUP stpxBackboneGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of BackboneFast feature."
+
+ GROUP stpxMSTGroup2
+ DESCRIPTION
+ "This group is optional for implementation of
+ Multiple Spanning Tree Protocol feature."
+
+ GROUP stpxRSTPGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRPVSTGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid PVST+ feature."
+
+ GROUP stpxExtendedSysIDGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Extended System ID feature."
+
+ GROUP stpxNotificationEnableGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ control on the generation of Spanning Tree
+ notifications."
+
+ GROUP stpxFastStartOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Spanning Tree Port Fast Start Oper Mode feature."
+ ::= { stpxMIBCompliances 8 }
+
+stpxMIBCompliance9 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxSstpGroup
+ DESCRIPTION
+ "This group is optional for implementations of
+ Cisco's Shared Spanning Tree Protocol (SSTP)."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxBpduSkewingGroup
+ DESCRIPTION
+ "This is an optional group for implementations of
+ Spanning Tree BPDU Skewing feature."
+
+ GROUP stpxFastStartGroup2
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+
+ GROUP stpxLoopGuardGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxFastStartGroup3
+ DESCRIPTION
+ "This group is optional for implementations
+ of Bpdu Guard and Bpdu Filter feature."
+
+ GROUP stpxUplinkGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of UplinkFast feature."
+
+ GROUP stpxBackboneGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of BackboneFast feature."
+
+ GROUP stpxRSTPGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRPVSTGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid PVST+ feature."
+
+ GROUP stpxExtendedSysIDGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Extended System ID feature."
+
+ GROUP stpxNotificationEnableGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ control on the generation of Spanning Tree
+ notifications."
+
+ GROUP stpxFastStartOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Spanning Tree Port Fast Start Oper Mode feature."
+
+ GROUP stpxMSTGroup3
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Multiple Spanning Tree Protocol on the device."
+
+ GROUP stpxSMSTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting IEEE MST on the device."
+
+ GROUP stpxSMSTInstanceGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTInstanceEditGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance edit information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTPortStatusGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port status information for Multiple Spanning
+ Tree Protocol on the device."
+
+ GROUP stpxSMSTPortHelloTimeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port hello time information for IEEE MST
+ on the device."
+ ::= { stpxMIBCompliances 9 }
+
+stpxMIBCompliance10 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxSstpGroup
+ DESCRIPTION
+ "This group is optional for implementations of
+ Cisco's Shared Spanning Tree Protocol (SSTP)."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxBpduSkewingGroup
+ DESCRIPTION
+ "This is an optional group for implementations of
+ Spanning Tree BPDU Skewing feature."
+
+ GROUP stpxFastStartGroup2
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+
+ GROUP stpxLoopGuardGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxFastStartGroup3
+ DESCRIPTION
+ "This group is optional for implementations
+ of Bpdu Guard and Bpdu Filter feature."
+
+ GROUP stpxUplinkGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of UplinkFast feature."
+
+ GROUP stpxBackboneGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of BackboneFast feature."
+
+ GROUP stpxRSTPGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRPVSTGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid PVST+ feature."
+
+ GROUP stpxExtendedSysIDGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Extended System ID feature."
+
+ GROUP stpxNotificationEnableGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ control on the generation of Spanning Tree
+ notifications."
+
+ GROUP stpxFastStartOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Spanning Tree Port Fast Start Oper Mode feature."
+
+ GROUP stpxMSTGroup3
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Multiple Spanning Tree Protocol on the device."
+
+ GROUP stpxSMSTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting IEEE MST on the device."
+
+ GROUP stpxSMSTInstanceGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTInstanceEditGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance edit information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTPortStatusGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port status information for Multiple Spanning
+ Tree Protocol on the device."
+
+ GROUP stpxSMSTPortHelloTimeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port hello time information for IEEE MST
+ on the device."
+
+ GROUP stpxSMSTInstanceCISTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting Common and Internal Spanning Tree (CIST)
+ information for IEEE MST on the device."
+ ::= { stpxMIBCompliances 10 }
+
+stpxMIBCompliance11 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxSstpGroup
+ DESCRIPTION
+ "This group is optional for implementations of
+ Cisco's Shared Spanning Tree Protocol (SSTP)."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxBpduSkewingGroup
+ DESCRIPTION
+ "This is an optional group for implementations of
+ Spanning Tree BPDU Skewing feature."
+
+ GROUP stpxFastStartGroup2
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+
+ GROUP stpxLoopGuardGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxFastStartGroup3
+ DESCRIPTION
+ "This group is optional for implementations
+ of Bpdu Guard and Bpdu Filter feature."
+
+ GROUP stpxUplinkGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of UplinkFast feature."
+
+ GROUP stpxBackboneGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of BackboneFast feature."
+
+ GROUP stpxRSTPGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRPVSTGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid PVST+ feature."
+
+ GROUP stpxExtendedSysIDGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Extended System ID feature."
+
+ GROUP stpxNotificationEnableGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ control on the generation of Spanning Tree
+ notifications."
+
+ GROUP stpxFastStartOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Spanning Tree Port Fast Start Oper Mode feature."
+
+ GROUP stpxMSTGroup3
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Multiple Spanning Tree Protocol on the device."
+
+ GROUP stpxSMSTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting IEEE MST on the device."
+
+ GROUP stpxSMSTInstanceGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTInstanceEditGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance edit information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTPortStatusGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port status information for Multiple Spanning
+ Tree Protocol on the device."
+
+ GROUP stpxSMSTPortHelloTimeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port hello time information for IEEE MST
+ on the device."
+
+ GROUP stpxSMSTInstanceCISTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting Common and Internal Spanning Tree (CIST)
+ information for IEEE MST on the device."
+
+ GROUP stpxPathCostOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting operational spanning tree path cost
+ mode."
+ ::= { stpxMIBCompliances 11 }
+
+stpxMIBCompliance12 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxSstpGroup
+ DESCRIPTION
+ "This group is optional for implementations of
+ Cisco's Shared Spanning Tree Protocol (SSTP)."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxBpduSkewingGroup
+ DESCRIPTION
+ "This is an optional group for implementations of
+ Spanning Tree BPDU Skewing feature."
+
+ GROUP stpxFastStartGroup2
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+
+ GROUP stpxLoopGuardGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxFastStartGroup3
+ DESCRIPTION
+ "This group is optional for implementations
+ of Bpdu Guard and Bpdu Filter feature."
+
+ GROUP stpxUplinkGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of UplinkFast feature."
+
+ GROUP stpxBackboneGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of BackboneFast feature."
+
+ GROUP stpxRSTPGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRSTPTransmitHoldCountGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRPVSTGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid PVST+ feature."
+
+ GROUP stpxExtendedSysIDGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Extended System ID feature."
+
+ GROUP stpxNotificationEnableGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ control on the generation of Spanning Tree
+ notifications."
+
+ GROUP stpxFastStartOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Spanning Tree Port Fast Start Oper Mode feature."
+
+ GROUP stpxMSTGroup4
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Multiple Spanning Tree Protocol on the device."
+
+ GROUP stpxSMSTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting IEEE MST on the device."
+
+ GROUP stpxSMSTMaxHopCountGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ maximum hop count configuration on the device."
+
+ GROUP stpxSMSTInstanceGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTInstanceEditGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance edit information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTPortStatusGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port status information for Multiple Spanning
+ Tree Protocol on the device."
+
+ GROUP stpxSMSTPortHelloTimeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port hello time information for IEEE MST
+ on the device."
+
+ GROUP stpxSMSTInstanceCISTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting Common and Internal Spanning Tree (CIST)
+ information for IEEE MST on the device."
+
+ GROUP stpxPathCostOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting operational spanning tree path cost
+ mode."
+
+ GROUP stpxSMSTPortMSTModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting port MST mode configuration."
+
+ GROUP stpxSMSTConfigDigestGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ supporting IEEE MST on the device."
+ ::= { stpxMIBCompliances 12 }
+
+stpxMIBCompliance13 MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which implement
+ Cisco STP Extensions MIB."
+ MODULE -- this module
+ GROUP stpxUplinkGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the UplinkFast capability."
+
+ GROUP stpxSstpGroup
+ DESCRIPTION
+ "This group is optional for implementations of
+ Cisco's Shared Spanning Tree Protocol (SSTP)."
+
+ GROUP stpxPreferredVlansGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the Preferred VLANs capability."
+
+ GROUP stpxNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpxBackboneGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the BackboneFast capability."
+
+ GROUP stpxRootGuardGroup
+ DESCRIPTION
+ "This group is mandatory for implementations
+ of the RootGuard capability."
+
+ GROUP stpxRootInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation required to implement."
+
+ GROUP stpx4kVlanGroup
+ DESCRIPTION
+ "This group must be implemented by the
+ entities which support the range of VlanIndex
+ between 1024 and 4095."
+
+ GROUP stpxSpanningTreeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP and PVSTP+"
+
+ GROUP stpxMISTPGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support MISTP."
+
+ GROUP stpxLongPathCostModeGroup
+ DESCRIPTION
+ "This group must be implemented by the entities
+ that support 32 bits spannning tree path cost
+ value."
+
+ GROUP stpxPVSTVlanGroup
+ DESCRIPTION
+ "This group is optional for implementations
+ of the Spanning Tree PVST+ Protocol VLAN
+ configuration."
+
+ GROUP stpxMISTPGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ that support MISTP with the range of VlanIndex
+ up to 4095."
+
+ GROUP stpxLoopInconsistencyNotificationsGroup
+ DESCRIPTION
+ "The notifications which a STP extension
+ implementation is required to implement."
+
+ GROUP stpxBpduSkewingGroup
+ DESCRIPTION
+ "This is an optional group for implementations of
+ Spanning Tree BPDU Skewing feature."
+
+ GROUP stpxFastStartGroup2
+ DESCRIPTION
+ "This stpxFastStartGroup is an optional group
+ containing objects providing information about
+ Spanning Tree Port Fast Start feature."
+
+ GROUP stpxLoopGuardGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of the LoopGuard capability."
+
+ GROUP stpxFastStartGroup3
+ DESCRIPTION
+ "This group is optional for implementations
+ of Bpdu Guard and Bpdu Filter feature."
+
+ GROUP stpxUplinkGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of UplinkFast feature."
+
+ GROUP stpxBackboneGroup2
+ DESCRIPTION
+ "This group is optional for implementations
+ of BackboneFast feature."
+
+ GROUP stpxRSTPGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRSTPTransmitHoldCountGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid Spanning Tree Protocol feature."
+
+ GROUP stpxRPVSTGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ Rapid PVST+ feature."
+
+ GROUP stpxExtendedSysIDGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Extended System ID feature."
+
+ GROUP stpxNotificationEnableGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ control on the generation of Spanning Tree
+ notifications."
+
+ GROUP stpxFastStartOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Spanning Tree Port Fast Start Oper Mode feature."
+
+ GROUP stpxMSTGroup4
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ Multiple Spanning Tree Protocol on the device."
+
+ GROUP stpxSMSTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting IEEE MST on the device."
+
+ GROUP stpxSMSTMaxHopCountGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ maximum hop count configuration on the device."
+
+ GROUP stpxSMSTInstanceGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTInstanceEditGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting MST instance edit information for
+ IEEE MST on the device."
+
+ GROUP stpxSMSTPortStatusGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port status information for Multiple Spanning
+ Tree Protocol on the device."
+
+ GROUP stpxSMSTPortHelloTimeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ port hello time information for IEEE MST
+ on the device."
+
+ GROUP stpxSMSTInstanceCISTGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting Common and Internal Spanning Tree (CIST)
+ information for IEEE MST on the device."
+
+ GROUP stpxPathCostOperModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting operational spanning tree path cost
+ mode."
+
+ GROUP stpxSMSTPortMSTModeGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ supporting port MST mode configuration."
+
+ GROUP stpxSMSTConfigDigestGroup
+ DESCRIPTION
+ "This group is optional for implementation of
+ supporting IEEE MST on the device."
+
+ GROUP stpxL2GatewayDomainIdGroup
+ DESCRIPTION
+ "This group is mandatory for implementation of
+ layer2 gateway domain identifier."
+ ::= { stpxMIBCompliances 13 }
+
+-- units of conformance
+
+stpxUplinkGroup OBJECT-GROUP
+ OBJECTS {
+ stpxUplinkFastEnabled,
+ stpxUplinkFastTransitions,
+ stpxUplinkStationLearningGenRate,
+ stpxUplinkStationLearningFrames
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for managing the UplinkFast
+ capability."
+ ::= { stpxMIBGroups 1 }
+
+stpxPreferredVlansGroup OBJECT-GROUP
+ OBJECTS { stpxPreferredVlansMap }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for indicating preferred VLANs."
+ ::= { stpxMIBGroups 2 }
+
+stpxSstpGroup OBJECT-GROUP
+ OBJECTS { stpxInconsistentState }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects to support Cisco's Shared Spanning
+ Tree Protocol (SSTP)."
+ ::= { stpxMIBGroups 3 }
+
+stpxNotificationsGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { stpxInconsistencyUpdate }
+ STATUS current
+ DESCRIPTION
+ "The notifications which a STP extension implementation is
+ required to implement."
+ ::= { stpxMIBGroups 4 }
+
+stpxBackboneGroup OBJECT-GROUP
+ OBJECTS {
+ stpxBackboneFastEnabled,
+ stpxBackboneFastInInferiorBPDUs,
+ stpxBackboneFastInRLQRequestPDUs,
+ stpxBackboneFastInRLQResponsePDUs,
+ stpxBackboneFastOutRLQRequestPDUs,
+ stpxBackboneFastOutRLQResponsePDUs
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects for managing the BackboneFast
+ capability."
+ ::= { stpxMIBGroups 5 }
+
+stpxRootGuardGroup OBJECT-GROUP
+ OBJECTS {
+ stpxRootGuardConfigEnabled,
+ stpxRootInconsistencyState
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects to support root guard
+ capabilities."
+ ::= { stpxMIBGroups 6 }
+
+stpxRootInconsistencyNotificationsGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { stpxRootInconsistencyUpdate }
+ STATUS current
+ DESCRIPTION
+ "The notifications which a STP root guard
+ implementation is required to implement."
+ ::= { stpxMIBGroups 7 }
+
+stpx4kVlanGroup OBJECT-GROUP
+ OBJECTS {
+ stpxPreferredVlansMap2k,
+ stpxPreferredVlansMap3k,
+ stpxPreferredVlansMap4k
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for VLANS with VlanIndex from 1024 to 4095."
+ ::= { stpxMIBGroups 8 }
+
+stpxSpanningTreeGroup OBJECT-GROUP
+ OBJECTS { stpxSpanningTreeType }
+ STATUS current
+ DESCRIPTION
+ "An object selecting what kind of spanning tree protocol."
+ ::= { stpxMIBGroups 9 }
+
+stpxMISTPGroup OBJECT-GROUP
+ OBJECTS {
+ stpxMISTPInstanceNumber,
+ stpxMISTPInstanceEnable,
+ stpxVlanMISTPInstMapInstIndex,
+ stpxVlanMISTPInstMapEditInstIndex,
+ stpxPreferredMISTPInstancesMap
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection objects managing the information of
+ MISTP feature."
+ ::= { stpxMIBGroups 10 }
+
+stpxLongPathCostModeGroup OBJECT-GROUP
+ OBJECTS {
+ stpxSpanningTreePathCostMode,
+ stpxLongStpPortPathCost
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection objects managing the information of
+ spanning tree path cost in 32 bits value."
+ ::= { stpxMIBGroups 11 }
+
+stpxPVSTVlanGroup OBJECT-GROUP
+ OBJECTS { stpxPVSTVlanEnable }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects managing the information
+ of Spanning Tree PVST+ protocol VLAN configuration."
+ ::= { stpxMIBGroups 12 }
+
+stpxMISTPGroup2 OBJECT-GROUP
+ OBJECTS {
+ stpxMISTPInstanceVlansMapped,
+ stpxMISTPInstanceVlansMapped2k,
+ stpxMISTPInstanceVlansMapped3k,
+ stpxMISTPInstanceVlansMapped4k
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection objects managing the information of
+ MISTP instances to VLAN mapping with the range of
+ VlanIndex up to 4095."
+ ::= { stpxMIBGroups 13 }
+
+stpxLoopGuardGroup OBJECT-GROUP
+ OBJECTS {
+ stpxLoopGuardConfigEnabled,
+ stpxLoopInconsistencyState
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects to support LoopGuard
+ capabilities."
+ ::= { stpxMIBGroups 14 }
+
+stpxLoopInconsistencyNotificationsGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { stpxLoopInconsistencyUpdate }
+ STATUS current
+ DESCRIPTION
+ "The notifications which a STP LoopGuard
+ implementation is required to implement."
+ ::= { stpxMIBGroups 15 }
+
+stpxFastStartGroup OBJECT-GROUP
+ OBJECTS {
+ stpxFastStartBpduGuardEnable,
+ stpxFastStartBpduFilterEnable,
+ stpxFastStartPortEnable
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects to support Spanning Tree Port
+ Fast Start feature."
+ ::= { stpxMIBGroups 16 }
+
+stpxBpduSkewingGroup OBJECT-GROUP
+ OBJECTS {
+ stpxBpduSkewingDetectionEnable,
+ stpxBpduSkewingLastSkewDuration,
+ stpxBpduSkewingWorstSkewDuration,
+ stpxBpduSkewingWorstSkewTime
+ }
+ STATUS current
+ DESCRIPTION
+ "This is an optional group with a collection of
+ objects to support Spanning Tree BPDU Skewing feature."
+ ::= { stpxMIBGroups 17 }
+
+stpxFastStartGroup2 OBJECT-GROUP
+ OBJECTS {
+ stpxFastStartBpduGuardEnable,
+ stpxFastStartBpduFilterEnable,
+ stpxFastStartPortMode,
+ stpxFastStartGlobalDefaultMode
+ }
+ STATUS current
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ support Fast Start global default mode on the device."
+ ::= { stpxMIBGroups 18 }
+
+stpxLoopGuardGroup2 OBJECT-GROUP
+ OBJECTS {
+ stpxLoopInconsistencyState,
+ stpxLoopGuardConfigMode,
+ stpxLoopGuardGlobalDefaultMode
+ }
+ STATUS current
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ support Loop Guard global default mode on the device."
+ ::= { stpxMIBGroups 19 }
+
+stpxMSTGroup OBJECT-GROUP
+ OBJECTS {
+ stpxMSTMaxInstanceNumber,
+ stpxMSTRegionName,
+ stpxMSTRegionRevision,
+ stpxMSTInstanceVlansMapped,
+ stpxMSTInstanceVlansMapped2k,
+ stpxMSTInstanceVlansMapped3k,
+ stpxMSTInstanceVlansMapped4k,
+ stpxMSTInstanceRemainingHopCount,
+ stpxMSTRegionEditBufferStatus,
+ stpxMSTRegionEditBufferOperation,
+ stpxMSTRegionEditName,
+ stpxMSTRegionEditRevision,
+ stpxMSTInstanceEditVlansMap,
+ stpxMSTInstanceEditVlansMap2k,
+ stpxMSTInstanceEditVlansMap3k,
+ stpxMSTInstanceEditVlansMap4k,
+ stpxMSTPortAdminLinkType,
+ stpxMSTPortOperLinkType,
+ stpxMSTPortProtocolMigration,
+ stpxMSTPortStatus,
+ stpxMSTPortRoleValue,
+ stpxMSTMaxHopCount
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ support Multiple Spanning Tree Protocol on the device."
+ ::= { stpxMIBGroups 20 }
+
+stpxPreferredMSTInstancesGroup OBJECT-GROUP
+ OBJECTS { stpxPreferredMSTInstancesMap }
+ STATUS deprecated
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ support Preferred MST Instance Map feature for Multiple
+ Spanning Tree Protocol on the device."
+ ::= { stpxMIBGroups 21 }
+
+stpxFastStartGroup3 OBJECT-GROUP
+ OBJECTS {
+ stpxFastStartPortBpduGuardMode,
+ stpxFastStartPortBpduFilterMode
+ }
+ STATUS current
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ support per port Bpdu Guard and Bpdu Filter mode
+ configuration on the device."
+ ::= { stpxMIBGroups 22 }
+
+stpxUplinkGroup2 OBJECT-GROUP
+ OBJECTS { stpxUplinkFastOperEnabled }
+ STATUS current
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ manage the UplinkFast capability."
+ ::= { stpxMIBGroups 23 }
+
+stpxBackboneGroup2 OBJECT-GROUP
+ OBJECTS { stpxBackboneFastOperEnabled }
+ STATUS current
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ manage the BackboneFast capability."
+ ::= { stpxMIBGroups 24 }
+
+stpxMSTGroup2 OBJECT-GROUP
+ OBJECTS {
+ stpxMSTMaxInstanceNumber,
+ stpxMSTRegionName,
+ stpxMSTRegionRevision,
+ stpxMSTInstanceVlansMapped,
+ stpxMSTInstanceVlansMapped2k,
+ stpxMSTInstanceVlansMapped3k,
+ stpxMSTInstanceVlansMapped4k,
+ stpxMSTInstanceRemainingHopCount,
+ stpxMSTRegionEditBufferStatus,
+ stpxMSTRegionEditBufferOperation,
+ stpxMSTRegionEditName,
+ stpxMSTRegionEditRevision,
+ stpxMSTInstanceEditVlansMap,
+ stpxMSTInstanceEditVlansMap2k,
+ stpxMSTInstanceEditVlansMap3k,
+ stpxMSTInstanceEditVlansMap4k,
+ stpxMSTPortStatus,
+ stpxMSTMaxHopCount
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ support Multiple Spanning Tree Protocol on the device."
+ ::= { stpxMIBGroups 25 }
+
+stpxRSTPGroup OBJECT-GROUP
+ OBJECTS {
+ stpxRSTPPortAdminLinkType,
+ stpxRSTPPortOperLinkType,
+ stpxRSTPPortProtocolMigration,
+ stpxRSTPPortRoleValue
+ }
+ STATUS current
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ support Rapid Spanning Tree Protocol on the device."
+ ::= { stpxMIBGroups 26 }
+
+stpxRPVSTGroup OBJECT-GROUP
+ OBJECTS { stpxRPVSTPortStatus }
+ STATUS current
+ DESCRIPTION
+ "An optional group with a collection of objects to
+ support Rapid PVST+ on the device."
+ ::= { stpxMIBGroups 27 }
+
+stpxExtendedSysIDGroup OBJECT-GROUP
+ OBJECTS {
+ stpxExtendedSysIDAdminEnabled,
+ stpxExtendedSysIDOperEnabled
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects to manage the
+ Extended System ID capability."
+ ::= { stpxMIBGroups 28 }
+
+stpxNotificationEnableGroup OBJECT-GROUP
+ OBJECTS { stpxNotificationEnable }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing control on the
+ generation of Spanning Tree notifications."
+ ::= { stpxMIBGroups 29 }
+
+stpxFastStartOperModeGroup OBJECT-GROUP
+ OBJECTS { stpxFastStartOperMode }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing Spanning Tree
+ Port Fast Start Operatioanl information on a port."
+ ::= { stpxMIBGroups 30 }
+
+stpxMSTGroup3 OBJECT-GROUP
+ OBJECTS {
+ stpxMSTRegionName,
+ stpxMSTRegionEditBufferStatus,
+ stpxMSTRegionEditBufferOperation,
+ stpxMSTRegionEditName,
+ stpxMSTMaxHopCount
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing support
+ for Multiple Spanning Tree Protocol on the device."
+ ::= { stpxMIBGroups 31 }
+
+stpxSMSTGroup OBJECT-GROUP
+ OBJECTS {
+ stpxSMSTMaxInstances,
+ stpxSMSTMaxInstanceID,
+ stpxSMSTRegionRevision,
+ stpxSMSTRegionEditRevision
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing support for
+ IEEE MST on the device."
+ ::= { stpxMIBGroups 32 }
+
+stpxSMSTInstanceGroup OBJECT-GROUP
+ OBJECTS {
+ stpxSMSTInstanceVlansMapped1k2k,
+ stpxSMSTInstanceVlansMapped3k4k,
+ stpxSMSTInstanceRemainingHopCount
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing support for
+ MST instance information for IEEE MST on the device."
+ ::= { stpxMIBGroups 33 }
+
+stpxSMSTInstanceEditGroup OBJECT-GROUP
+ OBJECTS {
+ stpxSMSTInstanceEditVlansMap1k2k,
+ stpxSMSTInstanceEditVlansMap3k4k,
+ stpxSMSTInstanceEditRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing support for MST
+ instance edit information for IEEE MST on the device."
+ ::= { stpxMIBGroups 34 }
+
+stpxSMSTPortStatusGroup OBJECT-GROUP
+ OBJECTS { stpxSMSTPortStatus }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing support for
+ port status information for MST Protocol on the
+ device."
+ ::= { stpxMIBGroups 35 }
+
+stpxSMSTPortHelloTimeGroup OBJECT-GROUP
+ OBJECTS {
+ stpxSMSTPortAdminHelloTime,
+ stpxSMSTPortConfigedHelloTime,
+ stpxSMSTPortOperHelloTime
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing support for per
+ port hello time information for IEEE MST on the device."
+ ::= { stpxMIBGroups 36 }
+
+stpxSMSTInstanceCISTGroup OBJECT-GROUP
+ OBJECTS {
+ stpxSMSTInstanceCISTRegionalRoot,
+ stpxSMSTInstanceCISTIntRootCost
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information about
+ Common and Internal Spanning Tree (CIST) for IEEE
+ MST on the device."
+ ::= { stpxMIBGroups 37 }
+
+stpxPathCostOperModeGroup OBJECT-GROUP
+ OBJECTS { stpxSpanningTreePathCostOperMode }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information about
+ operational spanning tree path cost mode."
+ ::= { stpxMIBGroups 38 }
+
+stpxRSTPTransmitHoldCountGroup OBJECT-GROUP
+ OBJECTS { stpxRSTPTransmitHoldCount }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information for
+ configuration of transmit hold count for Rapid Spanning
+ Tree Protocol."
+ ::= { stpxMIBGroups 39 }
+
+stpxSMSTPortMSTModeGroup OBJECT-GROUP
+ OBJECTS {
+ stpxSMSTPortAdminMSTMode,
+ stpxSMSTPortOperMSTMode
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information for port
+ MST mode configuration on the device."
+ ::= { stpxMIBGroups 40 }
+
+stpxSMSTMaxHopCountGroup OBJECT-GROUP
+ OBJECTS { stpxSMSTMaxHopCount }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information for
+ configuration of IEEE MST maximum hop count."
+ ::= { stpxMIBGroups 41 }
+
+stpxSMSTConfigDigestGroup OBJECT-GROUP
+ OBJECTS {
+ stpxSMSTConfigDigest,
+ stpxSMSTConfigPreStandardDigest
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information for
+ MST configuration digests on the device."
+ ::= { stpxMIBGroups 42 }
+
+stpxMSTGroup4 OBJECT-GROUP
+ OBJECTS {
+ stpxMSTRegionName,
+ stpxMSTRegionEditBufferStatus,
+ stpxMSTRegionEditBufferOperation,
+ stpxMSTRegionEditName
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing support
+ for Multiple Spanning Tree Protocol on the device."
+ ::= { stpxMIBGroups 43 }
+
+stpxL2GatewayDomainIdGroup OBJECT-GROUP
+ OBJECTS { stpxL2GatewayDomainId }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ for layer2 gateway spanning tree domain identifier on
+ the device."
+ ::= { stpxMIBGroups 44 }
+
+stpxMSTInconsistencyGroup OBJECT-GROUP
+ OBJECTS { stpxMstInconsistencyState }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing inconsistency information
+ for Multiple Spanning Tree Protocol on the device."
+ ::= { stpxMIBGroups 45 }
+
+stpxMSTNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { stpxMstInconsistencyUpdate }
+ STATUS current
+ DESCRIPTION
+ "A collection of notifications for Multiple Spanning Tree
+ Protocol on the device."
+ ::= { stpxMIBGroups 46 }
+
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 13:18:53 +0000