Initial commitHEADmain

1 files changed, 704 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-UDLDP-MIB b/MIBS/cisco/CISCO-UDLDP-MIB
new file mode 100644
index 0000000..08f00fb
--- /dev/null
+++ b/MIBS/cisco/CISCO-UDLDP-MIB
@@ -0,0 +1,704 @@
+-- *****************************************************************
+-- CISCO-UDLDP-MIB.my
+--   
+-- Nov. 1998, Padma Pullela
+--   
+-- Copyright (c) 1998, 2000, 2002, 2003, 2007, 2009 by cisco Systems Inc.
+-- All rights reserved.
+-- ****************************************************************
+
+CISCO-UDLDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE,
+    Unsigned32,
+    NOTIFICATION-TYPE
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP,
+    NOTIFICATION-GROUP
+        FROM SNMPv2-CONF
+    TruthValue
+        FROM SNMPv2-TC
+    ifIndex, ifName
+        FROM IF-MIB
+    ciscoMgmt
+        FROM CISCO-SMI;
+
+
+ciscoUdldpMIB MODULE-IDENTITY
+    LAST-UPDATED    "200911090900Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W Tasman Drive
+            San Jose, CA  95134
+            USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-lan-switch-snmp@cisco.com"
+    DESCRIPTION
+        "Cisco Uni Direction Link Detection Protocol
+        MIB"
+    REVISION        "200911090900Z"
+    DESCRIPTION
+                    "Add ciscoUdldpFastHelloGroup, and
+                     ciscoUdldpFastHelloNotificationGroup."
+    REVISION        "200711270000Z"
+    DESCRIPTION
+        "Added new object cudldpHelloIntervalExt."
+    REVISION        "200302210000Z"
+    DESCRIPTION
+        "Changed enumerated integer labels in the
+        cudldpInterfaceOperStatus object from 
+        'bidirectional' to 'biDirectional' and 
+        'notapplicable' to 'notApplicable'."
+    REVISION        "200210100000Z"
+    DESCRIPTION
+        "Added cudldpGlobalMode, cudldpInterfaceAdminMode
+        and cudldpInterfaceOperMode objects. 
+        Removed default values for 
+        cudldpGlobalEnable, cudldpHelloInterval
+        and udldpInterfaceEnable. Deprecated 
+        cudldpGlobalEnable and cudldpInterfaceEnable
+        cudldpInterfaceAggressiveMode objects."
+    REVISION        "200004100000Z"
+    DESCRIPTION
+        "Added two UDLDP AggressiveMode objects"
+    REVISION        "9811100000Z"
+    DESCRIPTION
+        "Initial version of this MIB module."
+    ::= { ciscoMgmt 118 }
+
+
+ciscoUdldpMIBNotifs  OBJECT IDENTIFIER ::=  { ciscoUdldpMIB 0 }
+ciscoUdldpMIBObjects  OBJECT IDENTIFIER ::= { ciscoUdldpMIB 1 }
+
+cudldpGlobal     OBJECT IDENTIFIER ::= { ciscoUdldpMIBObjects 1 }
+cudldpInterface  OBJECT IDENTIFIER ::= { ciscoUdldpMIBObjects 2 }
+cudldpFastHello  OBJECT IDENTIFIER ::= { ciscoUdldpMIBObjects 3 }
+
+
+
+-- cudldpGlobal
+
+cudldpGlobalEnable OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          deprecated
+    DESCRIPTION
+        "This variable is used to
+        enable(true)/disable(false) Uni Direction 
+        Link Detection Protocol on the device. 
+        cudldpGlobalEnable is deprecated  and
+        replaced with cudldpGlobalMode." 
+    ::= { cudldpGlobal 1 }
+
+cudldpHelloInterval OBJECT-TYPE
+    SYNTAX          INTEGER (7..90)
+    UNITS           "seconds"
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Indicates interval in seconds at which each port
+        sends a hello packet to all of its neighbors at
+        steady state when the link has been identified as
+        bidirectional.
+
+        For platforms which support cudldpHelloIntervalExt, when 
+        cudldpHelloIntervalExt reports a value less than the 
+        minimum value reportable by cudldpHelloInterval, then 
+        cudldpHelloInterval should report its minimum value of 7." 
+    ::= { cudldpGlobal 2 }
+
+cudldpGlobalMode OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        enable(1),
+                        disable(2),
+                        aggressive(3)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Indicates the mode of UDLDP feature on the device.
+        enable -- Uni Direction Link Detection Protocol is 
+                  enabled on the device.
+
+        disable -- Uni Directional Link Detection Protocol is
+                   disabled on the device.
+
+        aggresive -- Uni Directional Link Detection protocol
+                     is enabled in aggressive mode on the
+                     device." 
+    ::= { cudldpGlobal 3 }
+
+cudldpHelloIntervalExt OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..90)
+    UNITS           "seconds"
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Indicates interval in seconds at which each port
+        sends a hello packet to all of its neighbors at
+        steady state when the link has been identified as
+        bidirectional." 
+    ::= { cudldpGlobal 4 }
+
+cudldpFastHelloLinkFailRptNotifEnable OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object specifies whether 
+        cudldpFastHelloLinkFailRptNotification is generated by 
+        the system.
+
+        Setting this object value to 'true' will enable
+        generation of cudldpFastHelloLinkFailRptNotification. 
+
+        Seting this object value to 'false' will disable
+        generation of cudldpFastHelloLinkFailRptNotification."
+    ::= { cudldpGlobal 5 }
+
+cudldpFastHelloStatusChangeNotifEnable OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "This object specifies whether 
+        cudldpFastHelloStatusChangeNotification is generated by 
+        the system.
+
+        Setting this object value to 'true' will enable
+        generation of cudldpFastHelloStatusChangeNotification. 
+
+        Seting this object value to 'false' will disable
+        generation of cudldpFastHelloStatusChangeNotification."
+    ::= { cudldpGlobal 6 }
+
+-- cudldpInterface
+
+cudldpInterfaceTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CudldpInterfaceEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The (conceptual) table containing the status
+        of UDLDP on the device's interfaces."
+    ::= { cudldpInterface 1 }
+
+cudldpInterfaceEntry OBJECT-TYPE
+    SYNTAX          CudldpInterfaceEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "A conceptual row of cudldpInterfaceTable. An
+        entry exists for each interface that supports 
+        UDLDP."
+    INDEX           { ifIndex } 
+    ::= { cudldpInterfaceTable 1 }
+
+CudldpInterfaceEntry ::= SEQUENCE {
+        cudldpInterfaceEnable         TruthValue,
+        cudldpInterfaceOperStatus     INTEGER,
+        cudldpInterfaceAggressiveMode TruthValue,
+        cudldpInterfaceAdminMode      INTEGER,
+        cudldpInterfaceOperMode       INTEGER,
+        cudldpIfFastHelloInterval     Unsigned32,
+        cudldpIfOperHelloInterval     Unsigned32,
+        cudldpIfFastHelloOperStatus   INTEGER
+}
+
+cudldpInterfaceEnable OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          deprecated
+    DESCRIPTION
+        "This variable is used to enable UDLDP on this
+        interface.  If cudldpGlobalEnable is set to 
+        'false' then this variable has no effect.
+         cudldpInterfaceEnable is deprecated  and
+         replaced with cudldpInterfaceAdminMode." 
+    ::= { cudldpInterfaceEntry 1 }
+
+cudldpInterfaceOperStatus OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        shutdown(1),
+                        indeterminant(2),
+                        biDirectional(3),
+                        notApplicable(4)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "This mib object contains the following values,
+        which has the meaning as:
+        'shutdown'       - An Uni-Direction link  has been 
+                           detected and the port has been 
+                              disabled.
+        'indeterminant' - Uni-Direction Link Detection  
+                          protocol has not collected enough
+                          information to determine if the 
+                          link is bi directional or not.
+        'biDirectional' - A bi directional link has been 
+                           detected.
+        'notApplicable' - Uni-Direction Link Detection 
+                          Protocol is disabled." 
+    ::= { cudldpInterfaceEntry 2 }
+
+cudldpInterfaceAggressiveMode OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-write
+    STATUS          deprecated
+    DESCRIPTION
+        "An indication of whether the UDLDP aggressive mode
+        is enabled on this interface. If the 
+        aggressive mode is set to 'true', an active port may 
+        be shutdown in case of the abrupt loss of its 
+        neighbor(s) because the loss of communication
+        (heartbeat) with the neighbor(s) is assumed to be
+        caused by a fault; thus, the cudldpInterfaceOperStatus
+        of the active port will be 'shutdown'. Instead, when
+        the aggressive mode is set to 'false', and if there
+        is a loss of communication with the neighbor(s), then
+        the cudldpInterfaceOperStatus of the active port
+        will be 'indeterminant'. 
+        Therefore, this mode is recommended 
+        only for links that don't use hubs, media converters 
+        or similar devices, and where the unexpected loss of 
+        the port's neighbor is not an admissible condition.
+        cudldpInterfaceAggressiveMode is deprecated  and
+        replaced with cudldpInterfaceAdminMode." 
+    ::= { cudldpInterfaceEntry 3 }
+
+cudldpInterfaceAdminMode OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        enable(1),
+                        disable(2),
+                        aggressive(3),
+                        default(4)
+                    }
+    MAX-ACCESS      read-write
+    STATUS          current
+    DESCRIPTION
+        "Indicates the Administrative mode of Uni Direction
+        Link Detection Protocol Feature configured on this 
+        interface.
+
+        enable -- Uni Direction Link Detection Protocol is 
+                  enabled on this interface.
+
+        disable -- Uni Direction Link Detection Protocol is
+                   disabled on this interface.
+
+        aggressive -- Uni Direction Link Detection protocol
+                     is enabled in aggressive mode on this
+                     interface.
+
+        default -- Whether the Uni Directiona Link Detection 
+                   protocol is enabled or not on this interface
+                   depends on the object value of 
+                   cudldpGlobalMode." 
+    ::= { cudldpInterfaceEntry 4 }
+
+cudldpInterfaceOperMode OBJECT-TYPE
+    SYNTAX          INTEGER  {
+                        enable(1),
+                        disable(2),
+                        aggressive(3)
+                    }
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "Indicates the operational mode of Uni Direction Link
+        Detection Protocol Feature on this interface." 
+    ::= { cudldpInterfaceEntry 5 }
+
+cudldpIfFastHelloInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "This object specifies the fast hello interval at 
+         which each port sends a hello packet to all of its 
+         neighbors at steady state. By setting this object to 
+         a positive value, this interface is enabled to send
+         UDLD hello packet at a fast interval as specified by
+         this object value. 
+
+         Setting this object to zero value, this interface is 
+         disabled to send UDLD hello packet at fast interval.
+         Instead, the interface will send the UDLD hello packet
+         at the interval as specified by cudldpHelloInterval object
+         (or cudldpHelloIntervalExt if a platform supports
+         cudldpHelloIntervalExt)."
+    ::= { cudldpInterfaceEntry 6 }
+
+cudldpIfOperHelloInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the operational interval value
+         at which each port sends a hello packet to all of its 
+         neighbors at steady state." 
+    ::= { cudldpInterfaceEntry 7 }
+
+cudldpIfFastHelloOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { operational(1), notOperational(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object indicates the operational status of
+         fast hello UDLD at this interface." 
+    ::= { cudldpInterfaceEntry 8 }
+
+-- cudldpFastHello
+
+cudldpFastHelloErrorReportEnable OBJECT-TYPE
+    SYNTAX      TruthValue 
+    MAX-ACCESS  read-write
+    STATUS      current 
+    DESCRIPTION
+        "This object specifies whether error reporting is enabled or 
+         disabled when a fast hello UDLD link error is detected.
+
+         'true' specifies that when a fast hello UDLD link error 
+         is detected, the link remains in its current state and 
+         a cudldpFastHelloLinkFailRptNotification event
+         will be triggered. 
+
+         'false' specifies that when a fast hello UDLD link error is 
+         detected, the link will be automatically put in error-disable
+         state and no error report will be generated."
+    ::= { cudldpFastHello 1 }
+
+cudldpFastHelloMaxPorts OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-only
+    STATUS      current 
+    DESCRIPTION
+        "This object indicates the maximum number of interfaces
+         that fast hello UDLD can be enabled to run.
+
+         When the value of cudldpFastHelloConfigPorts reaches this
+         object value, enabling of fast hello UDLDP on additional 
+         interface will fail." 
+   ::= { cudldpFastHello 2 }
+
+cudldpFastHelloConfigPorts OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-only
+    STATUS      current 
+    DESCRIPTION
+        "This object indicates the total number of interfaces
+         that fast hello UDLD is currently enabled." 
+    ::= { cudldpFastHello 3 }
+
+cudldpFastHelloOperationalPorts OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-only
+    STATUS      current 
+    DESCRIPTION
+        "This object indicates the number of interfaces
+         that fast hello UDLD is currently enabled and in operational
+         state." 
+    ::= { cudldpFastHello 4 }
+
+-- Notifications
+
+cudldpFastHelloLinkFailRptNotification NOTIFICATION-TYPE
+    OBJECTS  { ifName }
+    STATUS   current
+    DESCRIPTION
+        "This notification is generated when UDLDP detects
+         a link failure on a fast hello UDLD link and the value of
+         cudldpFastHelloErrorReportEnable is 'true'. ifName 
+         identifies the interface where the link failure is 
+         detected."
+    ::= { ciscoUdldpMIBNotifs 1 }
+
+cudldpFastHelloStatusChangeNotification NOTIFICATION-TYPE
+    OBJECTS { 
+               cudldpHelloInterval,
+               cudldpIfFastHelloInterval, 
+               cudldpIfOperHelloInterval,
+               cudldpIfFastHelloOperStatus,
+               ifName
+            }
+    STATUS   current
+    DESCRIPTION
+        "This notification is generated when there is a change
+         in the value of cudldpIfFastHelloOperStatus object.
+         cudldpHelloInterval provides the hello interval configured
+         at the device level. cudldpIfFastHelloInterval provides
+         the fast hello interval configured at the interface level.
+         cudldpIfOperHelloInterval indicates the hello interval
+         that is currently operational at this interface.
+         cudldpIfFastHelloOperStatus indicates the operational
+         status of UDLD fast hello at this interface. ifName 
+         identifies the interface that trigger the generation of
+         this notification."
+    ::= { ciscoUdldpMIBNotifs 2 }
+
+-- Conformance
+
+ciscoUdldpMIBConformance  OBJECT IDENTIFIER
+    ::= { ciscoUdldpMIB 3 }
+
+ciscoUdldpMIBCompliances  OBJECT IDENTIFIER
+    ::= { ciscoUdldpMIBConformance 1 }
+
+ciscoUdldpMIBGroups  OBJECT IDENTIFIER
+    ::= { ciscoUdldpMIBConformance 2 }
+
+
+-- compliance statements
+
+ciscoUdldpMIBCompliance MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for the CISCO-UDLDP-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS { ciscoUdldpMIBGroup }
+    ::= { ciscoUdldpMIBCompliances 1 }
+
+ciscoUdldpMIBComplianceRev1 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for the CISCO-UDLDP-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS { ciscoUdldpMIBGroup }
+
+    GROUP           ciscoUdldpAggreModeOptionalGroup
+    DESCRIPTION
+        "This group is mandatory if the managed system
+        supports UDLDP aggressive mode feature."
+    ::= { ciscoUdldpMIBCompliances 2 }
+
+ciscoUdldpMIBComplianceRev2 MODULE-COMPLIANCE
+    STATUS          deprecated
+    DESCRIPTION
+        "The compliance statement for the CISCO-UDLDP-MIB."
+    MODULE          -- this module
+    MANDATORY-GROUPS { ciscoUdldpMIBGroup2 }
+
+    OBJECT          cudldpGlobalMode
+    SYNTAX          INTEGER  {
+                        enable(1),
+                        disable(2)
+                    }
+    DESCRIPTION
+        "The support of the value 'aggressive' is not
+        required if the global aggressive mode feature is 
+        not supported on the device."
+
+    OBJECT          cudldpInterfaceAdminMode
+    SYNTAX          INTEGER  {
+                        enable(1),
+                        disable(2)
+                    }
+    DESCRIPTION
+        "The support of the values 'aggressive' and/or
+        'default' is not required if the per interface 
+        'aggressive' and/or 'default' mode feature
+        is not supported on the device."
+    ::= { ciscoUdldpMIBCompliances 3 }
+
+ciscoUdldpMIBComplianceRev3 MODULE-COMPLIANCE
+    STATUS         deprecated 
+    DESCRIPTION
+        "The compliance statement for the CISCO-UDLDP-MIB. This
+         compliance statement is deprecated and superceded by
+         ciscoUdldpMIBComplianceRev4."
+    MODULE          -- this module
+    MANDATORY-GROUPS { ciscoUdldpMIBGroup2 }
+
+    GROUP           ciscoUdldpMIBGroup3
+    DESCRIPTION
+        "This group is mandatory only for platforms which support
+        the extended range of the hello interval (1..90)."
+
+    OBJECT          cudldpGlobalMode
+    SYNTAX          INTEGER  {
+                        enable(1),
+                        disable(2)
+                    }
+    DESCRIPTION
+        "The support of the value 'aggressive' is not
+        required if the global aggressive mode feature is 
+        not supported on the device."
+
+    OBJECT          cudldpInterfaceAdminMode
+    SYNTAX          INTEGER  {
+                        enable(1),
+                        disable(2)
+                    }
+    DESCRIPTION
+        "The support of the values 'aggressive' and/or
+        'default' is not required if the per interface 
+        'aggressive' and/or 'default' mode feature
+        is not supported on the device."
+    ::= { ciscoUdldpMIBCompliances 4 }
+
+ciscoUdldpMIBComplianceRev4 MODULE-COMPLIANCE
+        STATUS  current 
+        DESCRIPTION
+                "The compliance statement for the CISCO-UDLDP-MIB."
+        MODULE  -- this module
+        MANDATORY-GROUPS { ciscoUdldpMIBGroup2  }
+  
+        GROUP           ciscoUdldpMIBGroup3
+        DESCRIPTION
+              "This group is mandatory only for platforms which support
+               the extended range of the hello interval (1..90)."
+
+        GROUP   ciscoUdldpFastHelloGroup
+        DESCRIPTION
+              "This group is mandatory where fast hello UDLD 
+               is supported in the device." 
+ 
+        GROUP   ciscoUdldpFastHelloNotificationGroup
+        DESCRIPTION
+              "This group is mandatory where fast hello UDLD 
+               notification is supported in the device." 
+
+        OBJECT  cudldpGlobalMode
+        SYNTAX INTEGER { enable(1), disable(2) }
+        MIN-ACCESS      read-only
+        DESCRIPTION
+              "The support of the value 'aggressive' is not 
+               required if the global aggressive mode feature is 
+               not supported on the device.
+
+               Support for read-write access is not required."
+
+        OBJECT  cudldpInterfaceAdminMode
+        SYNTAX INTEGER { enable(1), disable(2) }
+        MIN-ACCESS    read-only
+        DESCRIPTION
+              "The support of the values 'aggressive' and/or 
+               'default' is not required if the per interface 
+               'aggressive' and/or 'default' mode feature
+               is not supported on the device.
+
+               Support for read-write access is not required."
+
+        OBJECT        cudldpHelloInterval 
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Support for read-write access is not required."
+
+        OBJECT        cudldpHelloIntervalExt 
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Support for read-write access is not required."
+
+        OBJECT        cudldpFastHelloLinkFailRptNotifEnable 
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Support for read-write access is not required."
+
+        OBJECT        cudldpFastHelloStatusChangeNotifEnable 
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Support for read-write access is not required."
+
+        OBJECT        cudldpIfFastHelloInterval 
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Support for read-write access is not required."
+
+        OBJECT        cudldpFastHelloErrorReportEnable 
+        MIN-ACCESS    read-only
+        DESCRIPTION
+            "Support for read-write access is not required."
+        ::= { ciscoUdldpMIBCompliances 5 }
+
+
+-- Units of Conformance
+
+ciscoUdldpMIBGroup OBJECT-GROUP
+    OBJECTS         {
+                        cudldpGlobalEnable,
+                        cudldpInterfaceEnable,
+                        cudldpInterfaceOperStatus
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of objects for use with the  Uni Direction
+        Link Detection Protocol."
+    ::= { ciscoUdldpMIBGroups 1 }
+
+ciscoUdldpAggreModeOptionalGroup OBJECT-GROUP
+    OBJECTS         {
+                        cudldpInterfaceAggressiveMode,
+                        cudldpHelloInterval
+                    }
+    STATUS          deprecated
+    DESCRIPTION
+        "A collection of optional objects providing UDLDP
+        aggressive mode configuration information."
+    ::= { ciscoUdldpMIBGroups 2 }
+
+ciscoUdldpMIBGroup2 OBJECT-GROUP
+    OBJECTS         {
+                        cudldpGlobalMode,
+                        cudldpInterfaceAdminMode,
+                        cudldpInterfaceOperMode,
+                        cudldpHelloInterval,
+                        cudldpInterfaceOperStatus
+                    }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing Uni Direction
+        Link Detection Protocol information."
+    ::= { ciscoUdldpMIBGroups 3 }
+
+ciscoUdldpMIBGroup3 OBJECT-GROUP
+    OBJECTS         { cudldpHelloIntervalExt }
+    STATUS          current
+    DESCRIPTION
+        "A collection of objects providing Uni Direction
+        Link Detection Protocol information."
+    ::= { ciscoUdldpMIBGroups 4 }
+
+ciscoUdldpFastHelloGroup OBJECT-GROUP
+     OBJECTS { 
+             cudldpIfFastHelloInterval,
+             cudldpIfOperHelloInterval,
+             cudldpIfFastHelloOperStatus,
+             cudldpFastHelloErrorReportEnable,
+             cudldpFastHelloLinkFailRptNotifEnable,
+             cudldpFastHelloStatusChangeNotifEnable,
+             cudldpFastHelloMaxPorts,
+             cudldpFastHelloConfigPorts,
+             cudldpFastHelloOperationalPorts
+             }
+      STATUS  current
+      DESCRIPTION
+          "A collection of objects which provides fast hello UDLD 
+           information in the device." 
+        ::= { ciscoUdldpMIBGroups 5 }
+
+ciscoUdldpFastHelloNotificationGroup NOTIFICATION-GROUP
+     NOTIFICATIONS { 
+             cudldpFastHelloLinkFailRptNotification,
+             cudldpFastHelloStatusChangeNotification
+             }
+      STATUS  current
+      DESCRIPTION
+          "A collection of notifications which provides fast hello
+           UDLD notifications support in the device."
+        ::= { ciscoUdldpMIBGroups 6 }
+
+END
+
+
+