Initial commitHEADmain

1 files changed, 178 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB b/MIBS/cisco/CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
new file mode 100644
index 0000000..703a9d0
--- /dev/null
+++ b/MIBS/cisco/CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
@@ -0,0 +1,178 @@
+-- *****************************************************************
+-- CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB - show the VLAN-ID and
+-- ifIndex for routed VLANs (ISL subinterfaces, and SVIs)
+--   
+-- January 1999, Cliff Sojourner
+--   
+-- Copyright (c) 1999, 2013 by cisco Systems Inc.
+-- All rights reserved.
+-- *****************************************************************
+
+CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY,
+    OBJECT-TYPE
+        FROM SNMPv2-SMI
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP
+        FROM SNMPv2-CONF
+    InterfaceIndex
+        FROM IF-MIB
+    InterfaceIndexOrZero
+        FROM CISCO-TC
+    VlanIndex
+        FROM CISCO-VTP-MIB
+    ciscoMgmt
+        FROM CISCO-SMI;
+
+
+ciscoVlanIfTableRelationshipMIB MODULE-IDENTITY
+    LAST-UPDATED    "9904010530Z"
+    ORGANIZATION    "Cisco Systems, Inc."
+    CONTACT-INFO
+            "Cisco Systems
+            Customer Service
+
+            Postal: 170 W Tasman Drive
+                    San Jose, CA  95134
+                    USA
+
+            Tel: +1 800 553-NETS
+
+            E-mail: cs-snmp@cisco.com"
+    DESCRIPTION
+        "Cisco VLAN ifTable Relationship MIB lists VLAN-id and ifIndex
+        information for routed VLAN interfaces.  
+
+        A routed VLAN interface is the router interface or sub-interface 
+        to which the router's IP address on the VLAN is attached.  
+        For example, an ISL, SDE, or 802.1Q encapsulated
+        subinterface, or Switched Virtual Interface (SVI)."
+    REVISION        "201307150000Z"
+    DESCRIPTION
+        "Initial version of this MIB module."
+    ::= { ciscoMgmt 128 }
+
+
+cviMIBObjects  OBJECT IDENTIFIER
+    ::= { ciscoVlanIfTableRelationshipMIB 1 }
+
+cviGlobals  OBJECT IDENTIFIER
+    ::= { cviMIBObjects 1 }
+
+
+cviVlanInterfaceIndexTable OBJECT-TYPE
+    SYNTAX          SEQUENCE OF CviVlanInterfaceIndexEntry 
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The cviVlanInterfaceIndexTable provides a way to
+        translate a VLAN-id in to an ifIndex, so that 
+        the routed VLAN interface's routing configuration 
+        can be obtained from interface entry in ipRouteTable.
+
+        Note that some routers can have interfaces to multiple
+        VLAN management domains, and therefore can have multiple 
+        routed VLAN interfaces which connect to different VLANs 
+        having the same VLAN-id.  Thus, it is possible to have 
+        multiple rows in this table for the same VLAN-id.
+
+        The cviVlanInterfaceIndexTable also provides a way
+        to find the VLAN-id from an ifTable VLAN's ifIndex."
+    ::= { cviGlobals 1 }
+
+cviVlanInterfaceIndexEntry OBJECT-TYPE
+    SYNTAX          CviVlanInterfaceIndexEntry
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "Each entry represents a routed VLAN interface, its
+        corresponding physical port if any, and the ifTable entry
+        for the routed VLAN interface.
+
+        Entries are created by the agent when the routed VLAN interface
+        is created.  Operational status of routing does not affect
+        the entries listed here.  For routing configuration please refer
+        to ipRouteTable.
+
+        Entries are deleted by the agent when the routed VLAN interface
+        is removed from the system configuration."
+    INDEX           {
+                        cviVlanId,
+                        cviPhysicalIfIndex
+                    } 
+    ::= { cviVlanInterfaceIndexTable 1 }
+
+CviVlanInterfaceIndexEntry ::= SEQUENCE {
+        cviVlanId            VlanIndex,
+        cviPhysicalIfIndex   InterfaceIndexOrZero,
+        cviRoutedVlanIfIndex InterfaceIndex
+}
+
+cviVlanId OBJECT-TYPE
+    SYNTAX          VlanIndex
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "The VLAN-id number of the routed VLAN interface." 
+    ::= { cviVlanInterfaceIndexEntry 1 }
+
+cviPhysicalIfIndex OBJECT-TYPE
+    SYNTAX          InterfaceIndexOrZero
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION
+        "For subinterfaces, this object is the ifIndex of the
+        physical interface for the subinterface.
+
+        For Switch Virtual Interfaces (SVIs), this object is zero." 
+    ::= { cviVlanInterfaceIndexEntry 2 }
+
+cviRoutedVlanIfIndex OBJECT-TYPE
+    SYNTAX          InterfaceIndex
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+        "The index for the ifTable entry associated with
+        this routed VLAN interface." 
+    ::= { cviVlanInterfaceIndexEntry 3 }
+ 
+
+cviMIBConformance  OBJECT IDENTIFIER
+    ::= { cviMIBObjects 3 }
+
+cviMIBCompliances  OBJECT IDENTIFIER
+    ::= { cviMIBConformance 1 }
+
+cviMIBGroups  OBJECT IDENTIFIER
+    ::= { cviMIBConformance 2 }
+
+
+-- Conformance
+
+cviMIBCompliance MODULE-COMPLIANCE
+    STATUS          current
+    DESCRIPTION
+        "The compliance statement for entities which implement
+        the CISCO-VLAN-INTERFACE-MIB"
+    MODULE          -- this module
+    MANDATORY-GROUPS { cviMIBGroup }
+    ::= { cviMIBCompliances 1 }
+
+-- Units of Conformance
+
+cviMIBGroup OBJECT-GROUP
+    OBJECTS         { cviRoutedVlanIfIndex }
+    STATUS          current
+    DESCRIPTION
+        "A set of objects to obtain VLAN-ID and ifIndex
+        information for routed VLAN interfaces."
+    ::= { cviMIBGroups 1 }
+
+END
+
+
+
+
+