Initial commitHEADmain

1 files changed, 1165 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCOSB-SSH-MIB b/MIBS/cisco/CISCOSB-SSH-MIB
new file mode 100644
index 0000000..bee96e5
--- /dev/null
+++ b/MIBS/cisco/CISCOSB-SSH-MIB
@@ -0,0 +1,1165 @@
+CISCOSB-SSH-MIB DEFINITIONS ::= BEGIN
+
+-- Title:      CISCOSB PHY MIB
+-- Version:    7.45
+-- Date:       19 Dec 2006
+--
+IMPORTS
+    OBJECT-TYPE, MODULE-IDENTITY,
+    Unsigned32, IpAddress                       FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, DisplayString, RowStatus
+                                                FROM SNMPv2-TC
+    switch001                                   FROM CISCOSB-MIB
+    InetAddressType, InetAddress                FROM INET-ADDRESS-MIB;
+
+
+   rlSsh MODULE-IDENTITY
+      LAST-UPDATED "202105170000Z"  -- September 30, 2002
+      ORGANIZATION "Cisco Systems, Inc."
+
+      CONTACT-INFO
+      "Postal: 170 West Tasman Drive
+      San Jose , CA 95134-1706
+      USA
+
+      
+      Website:  Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
+
+      DESCRIPTION
+              "The MIB module describes the private MIB for SSH supported
+               by CISCOSB's software and products."
+      REVISION     "200301030024Z"  -- January 04, 2003
+      DESCRIPTION
+              "The second revision"
+      REVISION     "200309210024Z"  -- September 21, 2003
+      DESCRIPTION
+              "Editorial changes."
+      ::= { switch001 78  }
+
+--
+-- Textual Conventions
+--
+RlSshPublicKeyAlgorithm ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "This textual convention describes the various possible public key
+         algorithms.  The key algorithm is used to select the PK to be generated
+         and is also used when viewing the public keys."
+
+    SYNTAX  INTEGER {
+        rsa1(0),
+        rsa(1),
+        dsa(2),
+        ec(3),
+        none(999)
+    }
+
+RlSshPublicKeyDigestFormat ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "This textual convention describes the format used to display the public
+         key fingerprint.  The hex format is the format used by PGP and OpenSSH.
+         The bubble-babble format is used by SSH.com software."
+
+    SYNTAX  INTEGER {
+        hex(0),
+        bubbleBabble(1)
+    }
+
+rlSshMibVersion OBJECT-TYPE
+    SYNTAX      INTEGER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The MIB version. The current version is 2"
+    ::= { rlSsh 1 }
+
+--
+-- Server tables
+--
+rlSshServer OBJECT IDENTIFIER ::= { rlSsh 2 }
+
+--
+-- Host Public Key Table
+--
+rlSshServerHostPublicKeyTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshServerHostPublicKeyTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+    "This table contains the router's public key.  Each row in this table
+     contains a fragment of the key, in printable binhex format.  There may
+     be up to 160 characters in every fragment, and they are all combined
+     to form one key.  The key is generated by writing to
+     rlSshServerRegenerateHostKey.  To cause clients to connect to this router
+     without printing warning messages (and also prevent active
+     man-in-the-middle), the router's public key must printed out and inserted
+     into the client's authorized_keys file"
+    ::= { rlSshServer 1 }
+
+rlSshServerHostPublicKeyTableEntry  OBJECT-TYPE
+   SYNTAX RlSshServerHostPublicKeyTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshServerHostPublicKeyAlgorithm, rlSshServerHostPublicKeyFragmentId }
+   ::= { rlSshServerHostPublicKeyTable 1 }
+
+RlSshServerHostPublicKeyTableEntry ::= SEQUENCE {
+  rlSshServerHostPublicKeyAlgorithm           RlSshPublicKeyAlgorithm,
+  rlSshServerHostPublicKeyFragmentId          Unsigned32,
+  rlSshServerHostPublicKeyFragmentText        DisplayString
+}
+
+rlSshServerHostPublicKeyAlgorithm   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyAlgorithm
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Identifies the type of public key to be displayed."
+     ::=  { rlSshServerHostPublicKeyTableEntry  1 }
+
+rlSshServerHostPublicKeyFragmentId   OBJECT-TYPE
+   SYNTAX Unsigned32
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Identifies the index of this fragment in the final key.  All segments must
+     be combined to form one big key."
+     ::=  { rlSshServerHostPublicKeyTableEntry  2 }
+
+rlSshServerHostPublicKeyFragmentText       OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "A part of the readable text entry for the server's public authorzation key."
+     ::=  { rlSshServerHostPublicKeyTableEntry  3 }
+
+--
+-- Host Public Key Fingerprint Table
+--
+rlSshServerHostPublicKeyFingerprintTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshServerHostPublicKeyFingerprintTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+    "This table contains the fingerprint for the router's public key."
+    ::= { rlSshServer 2 }
+
+rlSshServerHostPublicKeyFingerprintTableEntry  OBJECT-TYPE
+   SYNTAX RlSshServerHostPublicKeyFingerprintTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshServerHostPublicKeyFingerprintAlgorithm, rlSshServerHostPublicKeyFingerprintDigestFormat }
+   ::= { rlSshServerHostPublicKeyFingerprintTable 1 }
+
+RlSshServerHostPublicKeyFingerprintTableEntry ::= SEQUENCE {
+  rlSshServerHostPublicKeyFingerprintAlgorithm           RlSshPublicKeyAlgorithm,
+  rlSshServerHostPublicKeyFingerprintDigestFormat        RlSshPublicKeyDigestFormat,
+  rlSshServerHostPublicKeyFingerprint                    DisplayString
+}
+
+rlSshServerHostPublicKeyFingerprintAlgorithm   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyAlgorithm
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Identifies the type of public key to be displayed."
+     ::=  { rlSshServerHostPublicKeyFingerprintTableEntry  1 }
+
+rlSshServerHostPublicKeyFingerprintDigestFormat   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyDigestFormat
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Format of the digest to be displayed (OpenSSH or SSH.com)."
+     ::=  { rlSshServerHostPublicKeyFingerprintTableEntry 2 }
+
+rlSshServerHostPublicKeyFingerprint   OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "SECSH format fingerprint of the server's public key.  To prevent man in
+     the middle attacks, users should make sure the ssh Server's fingerprint,
+     as printed in the connection process, is similar to the one printed here."
+     ::=  { rlSshServerHostPublicKeyFingerprintTableEntry 3 }
+
+
+--
+-- Authorized Key Table
+--
+rlSshServerAuthorizedUsersPublicKeyTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshServerAuthorizedUsersPublicKeyTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+    "This table contains public keys for all users who are authorized to access
+    the router.  For a user to be able to log in using SSH, the user name must
+    appear in this table, and the user's public key must match the one found
+    here."
+     ::= { rlSshServer 3 }
+
+rlSshServerAuthorizedUsersPublicKeyTableEntry  OBJECT-TYPE
+   SYNTAX RlSshServerAuthorizedUsersPublicKeyTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshServerAuthorizedUserName,
+           rlSshServerAuthorizedUserPublicKeyFragmentId }
+   ::= { rlSshServerAuthorizedUsersPublicKeyTable 1 }
+
+RlSshServerAuthorizedUsersPublicKeyTableEntry ::= SEQUENCE {
+  rlSshServerAuthorizedUserName        DisplayString,
+  rlSshServerAuthorizedUserPublicKeyFragmentId      Unsigned32,
+  rlSshServerAuthorizedUserPublicKeyFragmentText    DisplayString,
+  rlSshServerAuthorizedUserPublicKeyFragmentStatus  RowStatus
+}
+
+rlSshServerAuthorizedUserName   OBJECT-TYPE
+   SYNTAX DisplayString (SIZE(1..48))
+   MAX-ACCESS   read-write
+   STATUS current
+   DESCRIPTION
+    "Name of the user who owns this public key.  Both the user name and the
+    key bytes must match before a user is authenticated using this key."
+     ::=  { rlSshServerAuthorizedUsersPublicKeyTableEntry  1 }
+
+rlSshServerAuthorizedUserPublicKeyFragmentId   OBJECT-TYPE
+   SYNTAX Unsigned32
+   MAX-ACCESS   read-write
+   STATUS current
+   DESCRIPTION
+    "Identifies the index of this fragment in the final key.  All segments must
+     be combined to form one big key."
+     ::=  { rlSshServerAuthorizedUsersPublicKeyTableEntry  2 }
+
+rlSshServerAuthorizedUserPublicKeyFragmentText       OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-write
+   STATUS current
+   DESCRIPTION
+    "A part of the readable text entry for the user's public authorzation key."
+     ::=  { rlSshServerAuthorizedUsersPublicKeyTableEntry  3 }
+
+rlSshServerAuthorizedUserPublicKeyFragmentStatus       OBJECT-TYPE
+   SYNTAX RowStatus
+   MAX-ACCESS   read-write
+   STATUS current
+   DESCRIPTION
+    "Create or delete a fragment of the user's public key.
+    A user is deleted if it has no remaining fragments."
+     ::=  { rlSshServerAuthorizedUsersPublicKeyTableEntry  4 }
+
+--
+-- New 01-01-03: Authorized user fingerprint table.
+--
+rlSshServerAuthorizedUsersPublicKeyFingerprintTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+    "This table contains the fingerprints of the public keys for all users who
+     are authorized to access the router.
+     To prevent man in the middle attacks, users should make sure the
+     user's fingerprint, as printed in the connection process, is similar
+     to the one printed here."
+     ::= { rlSshServer 5 }
+
+rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry  OBJECT-TYPE
+   SYNTAX RlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshServerAuthorizedUserFingerprintName,
+           rlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat }
+   ::= { rlSshServerAuthorizedUsersPublicKeyFingerprintTable 1 }
+
+RlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry ::= SEQUENCE {
+      rlSshServerAuthorizedUserFingerprintName        DisplayString,
+      rlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat        RlSshPublicKeyDigestFormat,
+      rlSshServerAuthorizedUserPublicKeyFingerprintAlgorithm           RlSshPublicKeyAlgorithm,
+      rlSshServerAuthorizedUserPublicKeyFingerprint                    DisplayString
+}
+
+rlSshServerAuthorizedUserFingerprintName   OBJECT-TYPE
+   SYNTAX DisplayString (SIZE(1..48))
+   MAX-ACCESS   read-write
+   STATUS current
+   DESCRIPTION
+    "Name of the user who owns this public key.  Both the user name and the
+     key bytes must match before a user is authenticated using this key."
+     ::=  { rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry  1 }
+
+rlSshServerAuthorizedUserPublicKeyFingerprintAlgorithm   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyAlgorithm
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Identifies the type of public key to be displayed."
+     ::=  { rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry  2 }
+
+rlSshServerAuthorizedUserPublicKeyFingerprintDigestFormat   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyDigestFormat
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Format of the digest to be displayed (OpenSSH or SSH.com)."
+     ::=  { rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry 3 }
+
+rlSshServerAuthorizedUserPublicKeyFingerprint   OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "SECSH format fingerprint of the user's public key.  To prevent man in
+     the middle attacks, users should make sure their ssh fingerprint,
+     as printed in the connection process, is similar to the one printed here."
+     ::=  { rlSshServerAuthorizedUsersPublicKeyFingerprintTableEntry 4 }
+
+
+--
+-- Session Table
+--
+rlSshServerSessionTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshServerSessionTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+    "Each row in this table corresponds to an active SSH session with
+     the server"
+     ::= { rlSshServer 6 }
+
+rlSshServerSessionTableEntry  OBJECT-TYPE
+   SYNTAX RlSshServerSessionTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshServerSessionIdentifier }
+   ::= { rlSshServerSessionTable 1 }
+
+RlSshServerSessionTableEntry ::= SEQUENCE {
+  rlSshServerSessionIdentifier      Unsigned32,
+  rlSshServerSessionPeerAddress     IpAddress,
+  rlSshServerSessionPeerPort        Unsigned32,
+  rlSshServerSessionUsername        DisplayString,
+  rlSshServerSessionPeerVersion     DisplayString,
+  rlSshServerSessionCipher          DisplayString,
+  rlSshServerSessionHMAC            DisplayString
+}
+
+rlSshServerSessionIdentifier   OBJECT-TYPE
+   SYNTAX Unsigned32
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Identifies the connection to which this row corresponds."
+     ::=  { rlSshServerSessionTableEntry 1 }
+
+rlSshServerSessionPeerAddress   OBJECT-TYPE
+   SYNTAX IpAddress
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "The network address of the remote host connected to the server."
+     ::=  { rlSshServerSessionTableEntry 2 }
+
+rlSshServerSessionPeerPort      OBJECT-TYPE
+   SYNTAX Unsigned32
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "The source network port of the remote host connected to the server."
+     ::=  { rlSshServerSessionTableEntry 3 }
+
+rlSshServerSessionPeerVersion   OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "The client version of the remote host connected to the server."
+     ::=  { rlSshServerSessionTableEntry 4 }
+
+rlSshServerSessionUsername      OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "SSH authenticated name of user connected to the server."
+     ::=  { rlSshServerSessionTableEntry 5 }
+
+rlSshServerSessionCipher      OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Data encryption cipher used in this connection."
+     ::=  { rlSshServerSessionTableEntry 6 }
+
+rlSshServerSessionHMAC      OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-only
+   STATUS current
+   DESCRIPTION
+    "Message authentication code used in this connection."
+     ::=  { rlSshServerSessionTableEntry 7 }
+
+--
+-- Session Inet Table
+--
+rlSshServerSessionInetTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshServerSessionInetTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION  "Each row in this table corresponds to an active SSH session with the server"
+     ::= { rlSshServer 7 }
+
+rlSshServerSessionInetTableEntry  OBJECT-TYPE
+   SYNTAX       RlSshServerSessionInetTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION  "The row definition for this table."
+   INDEX { rlSshServerSessionInetIdentifier }
+   ::= { rlSshServerSessionInetTable 1 }
+
+RlSshServerSessionInetTableEntry ::= SEQUENCE {
+  rlSshServerSessionInetIdentifier      Unsigned32,
+  rlSshServerSessionInetPeerAddressType InetAddressType,
+  rlSshServerSessionInetPeerAddress     InetAddress,
+  rlSshServerSessionInetPeerPort        Unsigned32,
+  rlSshServerSessionInetUsername        DisplayString,
+  rlSshServerSessionInetPeerVersion     DisplayString,
+  rlSshServerSessionInetCipher          DisplayString,
+  rlSshServerSessionInetHMAC            DisplayString
+}
+
+rlSshServerSessionInetIdentifier   OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION  "Identifies the connection to which this row corresponds."
+     ::=  { rlSshServerSessionInetTableEntry 1 }
+
+rlSshServerSessionInetPeerAddressType   OBJECT-TYPE
+   SYNTAX       InetAddressType
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION  "The network address of the remote host connected to the server."
+     ::=  { rlSshServerSessionInetTableEntry 2 }
+
+rlSshServerSessionInetPeerAddress   OBJECT-TYPE
+   SYNTAX       InetAddress
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION  "The network address of the remote host connected to the server."
+     ::=  { rlSshServerSessionInetTableEntry 3 }
+
+rlSshServerSessionInetPeerPort      OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION  "The source network port of the remote host connected to the server."
+     ::=  { rlSshServerSessionInetTableEntry 4 }
+
+rlSshServerSessionInetPeerVersion   OBJECT-TYPE
+   SYNTAX       DisplayString
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION  "The client version of the remote host connected to the server."
+     ::=  { rlSshServerSessionInetTableEntry 5 }
+
+rlSshServerSessionInetUsername      OBJECT-TYPE
+   SYNTAX       DisplayString
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION  "SSH authenticated name of user connected to the server."
+     ::=  { rlSshServerSessionInetTableEntry 6 }
+
+rlSshServerSessionInetCipher      OBJECT-TYPE
+   SYNTAX       DisplayString
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION  "Data encryption cipher used in this connection."
+     ::=  { rlSshServerSessionInetTableEntry 7 }
+
+rlSshServerSessionInetHMAC      OBJECT-TYPE
+   SYNTAX       DisplayString
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION  "Message authentication code used in this connection."
+     ::=  { rlSshServerSessionInetTableEntry 8 }
+
+rlSshServerImportExportSelfKeyTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshServerImportExportSelfKeyEntry
+   MAX-ACCESS     not-accessible
+   STATUS     current
+   DESCRIPTION
+    "This table can be used for 2 purposes:
+     1) Importing public/private key pair to serve as the device key when acting
+     as SSH server. This is done by setting entries to this table, according to
+     the specified format. When the last entry (footer) is set, the whole key
+     pair is checked and if valid, stored in CDB.
+     2) Exporting the device SSH server public/private key. This can be done by
+     performing GetNext operations on this table."
+    ::= { rlSshServer 8 }
+
+rlSshServerImportExportSelfKeyEntry  OBJECT-TYPE
+   SYNTAX RlSshServerImportExportSelfKeyEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshServerImportExportSelfKeyAlgorithm,
+           rlSshServerImportExportSelfKeyFormat,
+           rlSshServerImportExportSelfKeyFragmentId}
+   ::= { rlSshServerImportExportSelfKeyTable 1 }
+
+RlSshServerImportExportSelfKeyEntry ::= SEQUENCE {
+  rlSshServerImportExportSelfKeyAlgorithm       RlSshPublicKeyAlgorithm,
+  rlSshServerImportExportSelfKeyFormat          INTEGER,
+  rlSshServerImportExportSelfKeyFragmentId      INTEGER,
+  rlSshServerImportExportSelfKeyFragmentText    OCTET STRING
+}
+
+rlSshServerImportExportSelfKeyAlgorithm   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyAlgorithm
+   MAX-ACCESS   not-accessible
+   STATUS current
+   DESCRIPTION
+    "Identifies the type of key pair."
+     ::=  { rlSshServerImportExportSelfKeyEntry  1 }
+
+rlSshServerImportExportSelfKeyFormat   OBJECT-TYPE
+   SYNTAX INTEGER {
+            uuencoded-format(1)
+           }
+
+   MAX-ACCESS   not-accessible
+   STATUS current
+   DESCRIPTION
+    "Specifies the format of public/key pair. The following formats are
+    supported for import/export:
+    1) uuencoded_format - in this format both private and public key are in
+    uu-encoded format, and are seperated from one another by header and footer.
+    An example of the concateneation of all fragments in this format is:
+    -----BEGIN RSA PRIVATE KEY-----
+    tDaNkZZoCxXfkLLsLDlZ6T9H8U4Gz637eRV7BYBpapkidAxY1UG0/qgfKLPkbId4wzht6ArV9bE4fMtX
+    wSMOxL3q31pOmUdVhjbWYcgZQBDy1DjFSbuIEdP85c96B9bBE2nPv90mSvb/6j8R2NItT/KJeiYMtLtI
+    N3m6/zESKJGIrX0jP1RFDjVZSS5chSAFgB0egsLZEyOQn7jAqpX/x/easD2J6F/OjPXlJ9Hff2tMb3NU
+    QYyBoWH2J9IxhWB6Vo66R9Y04JGR18uL/rV2sMCtpg5ppkVTEpNTp9qE1yXocR2NmzUfNFap+GJ4IHj8
+    CzkVfmJM/kEWaJsYgHbAgLyRg4QVyelfobv1B71aQ+u1z9KGu/QajkWdR04OQfsGOL1CvU2LGYDcRjfH
+    jv+jl/UkDRRjoD9kt2WvouT+OL6esvKl0OJBqWbGNXg9TWv/VLtJIwgUno+MLaJuOM4Fh44+wpnqUXwQ
+    TFtBFc8pzt5BoOwbv9gXpicTkq4/+GhwXWXxSVFebKhnHAvKSLT+Ba7K7ZeR8EIIxbXdDNFOiS45R2KI
+    jxxXLXK44u6KGl5MygCKXUOFlJ+Zhgrq6ZH17z/RVJQ2CWqb5Ekn9GY3kH9QZ3mb4MDPfriWi2lHGXHY
+    JmJd4SLQhpBdnOS5tu84QmyU3dNbAdzghDsR+dEY/6g7Cn0kcVkeHNZ0H+mCZik5f6XBD8eplkk43bdR
+    FrkwTeAjwurGcKwdiKkR4DlfSq3DKssVBucTqUpqsKqPXLwTIL44rWKhEPXgGPB2XDG0VLvIRKkAgEGI
+    LNTwOm091Ro=
+    -----END RSA PRIVATE KEY-----
+
+    -----BEGIN RSA PUBLIC KEY-----
+    MIGHAoGBAOeIC9gRg3YaEGGMp3C00qNwLINAEDZV/J4BWM5WnWwCWZyHXDs2XiEmFu0ZONAD4gcT2f2f
+    NNfCBPye39VVuOkKQuSV0MLLX5800LZ4y1BNcPzPZHpnGaCzl7iAjhfj9MolzAh5VRjeiYt0t1um4dm+
+    q9A4BtfpJqDYxCW9uxd/AgEj
+    -----END RSA PUBLIC KEY-----
+    "
+     ::=  { rlSshServerImportExportSelfKeyEntry  2 }
+
+rlSshServerImportExportSelfKeyFragmentId   OBJECT-TYPE
+   SYNTAX INTEGER
+   MAX-ACCESS   not-accessible
+   STATUS current
+   DESCRIPTION
+    "Identifies the index of this fragment in the key pair input/output."
+     ::=  { rlSshServerImportExportSelfKeyEntry  3 }
+
+rlSshServerImportExportSelfKeyFragmentText    OBJECT-TYPE
+   SYNTAX OCTET STRING
+   MAX-ACCESS   read-write
+   STATUS current
+   DESCRIPTION
+    "A part of the readable text entry for the key pair input/output."
+     ::=  { rlSshServerImportExportSelfKeyEntry  4 }
+
+--
+-- SSH Server Scalars
+--
+rlSshServerPort OBJECT-TYPE
+    SYNTAX      Unsigned32(1..65535)
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "Specifies the TCP port used by the SSH 2 Server to listen for incoming
+         connections."
+    DEFVAL      { 22 }
+    ::= { rlSshServer 101 }
+
+rlSshServerEnable OBJECT-TYPE
+    SYNTAX   INTEGER {
+        enable(1),
+        disable(2)
+    }
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "Enables listening for incoming SSH2 connections on the port defined in
+        rlSshServerPort."
+    ::= { rlSshServer 102 }
+
+rlSshServerEnablePublicKeyAuthentication OBJECT-TYPE
+    SYNTAX   INTEGER {
+        enable(1),
+        disable(2)
+    }
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "If PK authentication is enabled, incoming SSH connections are
+        authenticated using public key authentication (using
+        rlSshServerAuthorizedUsersPublicKeyTable), before authenticating using
+        the router's standard AAA."
+    ::= { rlSshServer 103 }
+
+rlSshServerRegenerateHostKey OBJECT-TYPE
+    SYNTAX  RlSshPublicKeyAlgorithm
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "Setting to a value other than none results in the Server (Host) Key
+        being regenerated.  The key size is host-specific."
+    ::= { rlSshServer 104 }
+
+rlSshServerDefaultKeyFlag OBJECT-TYPE
+    SYNTAX  INTEGER {
+           rsa(1),
+           dsa(2),
+           rsa-dsa(3),
+           ec(4),
+           all(99),
+           none(100)
+    }
+    MAX-ACCESS      read-only
+    STATUS current
+    DESCRIPTION
+        "This scalar indicates which of the SSH server keys are default keys
+         (automatically generated)."
+    ::= { rlSshServer 105 }
+
+rlSshServerDeleteSelfKey OBJECT-TYPE
+    SYNTAX  RlSshPublicKeyAlgorithm
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+           "Setting to a value other than 'none' results in deleting the server self
+           key of the chosen type. As a result a default key may be created
+           (according to the MTSC..)"
+      ::= { rlSshServer 106 }
+
+rlSshServerEnablePublicKeyAuthAutoLogin OBJECT-TYPE
+    SYNTAX   INTEGER {
+        enable(1),
+        disable(2)
+    }
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "If PK authentication is succesfull and AAA local DB method
+        is enabled for SSH line, the username is checked with AAA
+        local DB. If present, the user is authenticated automatically
+        without prompting for username or password."
+    ::= { rlSshServer 107 }
+
+rlSshServerEnablePasswordAuthentication OBJECT-TYPE
+    SYNTAX   INTEGER {
+        enable(1),
+        disable(2)
+    }
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "If password authentication is enabled, incoming SSH connections are
+        authenticated with username/password authentication using
+        the router's standard AAA."
+    ::= { rlSshServer 108 }
+--
+-- SSH Client Scalars
+--
+rlSshClient OBJECT IDENTIFIER ::= { rlSsh 3 }
+
+rlSshClientUserName OBJECT-TYPE
+    SYNTAX      DisplayString(SIZE(1..70))
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "Specifies the default user name the ssh client will use when
+        authenticating to a remote server. In SCP sessions this global
+        user name will be used unless a specific user name has been specified
+        for the operation.
+        The value of this MIB must not contain charachters ':' or '@' (those
+        are used to indicate parameters seperation in SCP copy)."
+    DEFVAL { "anonymous" }
+    ::= { rlSshClient 1 }
+
+rlSshClientRegenerateSelfKey OBJECT-TYPE
+    SYNTAX  RlSshPublicKeyAlgorithm
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "Setting to a value other than none results in the client self key
+        being regenerated.  The key size is host-specific."
+    ::= { rlSshClient 2 }
+
+--
+-- Client Self Public Key Table
+--
+rlSshClientSelfPublicKeyTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshClientSelfPublicKeyTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+    "This table contains the router's client self public key.  Each row in
+    this table contains a fragment of the key, in printable binhex format.
+    There may be up to 160 characters in every fragment, and they are all
+    combined to form one key.  The key is generated by writing to
+    rlSshClientRegenerateSelfKey.  To cause clients to connect to this router
+    without printing warning messages (and also prevent active
+    man-in-the-middle), the router's public key must printed out and
+    inserted into the client's authorized_keys file"
+    ::= { rlSshClient 3 }
+
+rlSshClientSelfPublicKeyTableEntry  OBJECT-TYPE
+   SYNTAX RlSshClientSelfPublicKeyTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshClientSelfPublicKeyAlgorithm, rlSshClientSelfPublicKeyFragmentId }
+   ::= { rlSshClientSelfPublicKeyTable 1 }
+
+RlSshClientSelfPublicKeyTableEntry ::= SEQUENCE {
+  rlSshClientSelfPublicKeyFragmentId      Unsigned32,
+  rlSshClientSelfPublicKeyAlgorithm       RlSshPublicKeyAlgorithm,
+  rlSshClientSelfPublicKeyFragmentText        DisplayString
+}
+
+rlSshClientSelfPublicKeyFragmentId   OBJECT-TYPE
+   SYNTAX Unsigned32
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+    "Identifies the index of this fragment in the final key.  All segments must
+     be combined to form one big key."
+     ::=  { rlSshClientSelfPublicKeyTableEntry  1 }
+
+rlSshClientSelfPublicKeyAlgorithm   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyAlgorithm
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+    "Identifies the type of public key to be displayed."
+     ::=  { rlSshClientSelfPublicKeyTableEntry  2 }
+
+rlSshClientSelfPublicKeyFragmentText       OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS   read-write
+   STATUS current
+   DESCRIPTION
+    "A part of the readable text entry for the router's client public
+     authorization key."
+     ::=  { rlSshClientSelfPublicKeyTableEntry  3 }
+
+--
+-- Client Self Key Fingerprint Table
+--
+rlSshClientSelfPublicKeyFingerprintTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshClientSelfPublicKeyFingerprintTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+    "This table contains the fingerprint for the client's self key.  "
+    ::= { rlSshClient 4 }
+
+rlSshClientSelfPublicKeyFingerprintTableEntry  OBJECT-TYPE
+   SYNTAX RlSshClientSelfPublicKeyFingerprintTableEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshClientSelfPublicKeyFingerprintAlgorithm, rlSshClientSelfPublicKeyFingerprintDigestFormat }
+   ::= { rlSshClientSelfPublicKeyFingerprintTable 1 }
+
+RlSshClientSelfPublicKeyFingerprintTableEntry ::= SEQUENCE {
+  rlSshClientSelfPublicKeyFingerprintAlgorithm           RlSshPublicKeyAlgorithm,
+  rlSshClientSelfPublicKeyFingerprintDigestFormat        RlSshPublicKeyDigestFormat,
+  rlSshClientSelfPublicKeyFingerprint                    DisplayString
+}
+
+rlSshClientSelfPublicKeyFingerprintAlgorithm   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyAlgorithm
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+    "Identifies the type of public key to be displayed."
+     ::=  { rlSshClientSelfPublicKeyFingerprintTableEntry  1 }
+
+rlSshClientSelfPublicKeyFingerprintDigestFormat   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyDigestFormat
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+    "Format of the digest to be displayed (OpenSSH or SSH.com)."
+     ::=  { rlSshClientSelfPublicKeyFingerprintTableEntry 2 }
+
+rlSshClientSelfPublicKeyFingerprint   OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+    "SECSH format fingerprint of the client's self key.  To prevent man in
+     the middle attacks, users should make sure the ssh Server's fingerprint,
+     as printed in the connection process, is similar to the one printed here."
+     ::=  { rlSshClientSelfPublicKeyFingerprintTableEntry 3 }
+
+rlSshClientAuthenticationMethod OBJECT-TYPE
+    SYNTAX   INTEGER {
+        public-key-rsa(1),
+        public-key-dsa(2),
+        password(3),
+        public-key-ec(4)
+    }
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "Specifies the global authentication method for SSH client. SSH client
+         will apply this authentication method upon connecting to a remote server,
+         if no specific authentication method has been defined for this operation."
+    ::= { rlSshClient 5 }
+
+
+rlSshClientPassword OBJECT-TYPE
+    SYNTAX DisplayString(SIZE(0..70))
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+        "Specifies the global password for SSH client, to be used for 'password'
+         authentication. SSH client will use this password during authentication
+         phase (when connecting remote server), in case no specific password has
+         been specified for this operation.
+         The value of this MIB must not contain charachters ':' or '@' (those
+         are used to indicate parameters seperation in SCP copy).
+         Upon setting the password, its length must be in range 1-70."
+    ::= { rlSshClient 6 }
+
+
+rlSshClientPasswordChangeTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshClientPasswordChangeEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+    "This table allows the user to change the password in a remote SSH server.
+     It should be used when working with 'password' authentication with remote
+     server in SCP sessions.
+     Set operation on this table will initiate SCP session with the SSH server
+     whose inet address is specified in the key rlSshClientPasswordChangeInetAddress.
+     During this session the password for username rlSshClientPasswordChangeUsername
+     will be changed in the server from rlSshClientPasswordChangeOldPassword to
+     rlSshClientPasswordChangeNewPassword.
+     The Set operation might fail, in case an SCP session is already being
+     held. In case 'noError' is returned, the user can poll the fields
+     rlSshClientPasswordChangeStatus and rlSshClientPasswordChangeFailureReason
+     in order to get information on operation status and possible failure
+     reason. Note: up to 3 status records can be saved."
+    ::= { rlSshClient 7 }
+
+rlSshClientPasswordChangeEntry  OBJECT-TYPE
+   SYNTAX RlSshClientPasswordChangeEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshClientPasswordChangeInetAddrType,
+           rlSshClientPasswordChangeInetAddr}
+   ::= { rlSshClientPasswordChangeTable 1 }
+
+RlSshClientPasswordChangeEntry ::= SEQUENCE {
+  rlSshClientPasswordChangeInetAddrType   InetAddressType,
+  rlSshClientPasswordChangeInetAddr       InetAddress,
+  rlSshClientPasswordChangeUsername       DisplayString,
+  rlSshClientPasswordChangeOldPassword    DisplayString,
+  rlSshClientPasswordChangeNewPassword    DisplayString,
+  rlSshClientPasswordChangeStatus         INTEGER,
+  rlSshClientPasswordChangeFailureReason  DisplayString
+}
+
+rlSshClientPasswordChangeInetAddrType   OBJECT-TYPE
+   SYNTAX InetAddressType
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+    "Specifies the inet address type of remote SCP server"
+     ::=  { rlSshClientPasswordChangeEntry  1 }
+
+rlSshClientPasswordChangeInetAddr     OBJECT-TYPE
+   SYNTAX InetAddress
+   MAX-ACCESS not-accessible
+   STATUS current
+   DESCRIPTION
+    "Specifies the inet address of remote SCP server"
+     ::=  { rlSshClientPasswordChangeEntry  2 }
+
+rlSshClientPasswordChangeUsername   OBJECT-TYPE
+   SYNTAX DisplayString(SIZE(1..70))
+   MAX-ACCESS read-write
+   STATUS current
+   DESCRIPTION
+    "Specifies the username for which the password change is required."
+     ::=  { rlSshClientPasswordChangeEntry  3 }
+
+rlSshClientPasswordChangeOldPassword   OBJECT-TYPE
+   SYNTAX DisplayString(SIZE(0..70))
+   MAX-ACCESS read-write
+   STATUS current
+   DESCRIPTION
+    "Specifies the old password that was in use for rlSshClientPasswordChangeUsername
+     until now. Upon setting a value in this entry, length of this field value
+     must be 6-70. Password of length 0 will always be returned on GET operations."
+     ::=  { rlSshClientPasswordChangeEntry  4 }
+
+rlSshClientPasswordChangeNewPassword   OBJECT-TYPE
+   SYNTAX DisplayString(SIZE(0..70))
+   MAX-ACCESS read-write
+   STATUS current
+   DESCRIPTION
+    "Specifies the new password that should be in use for
+     rlSshClientPasswordChangeUsername from now on. Upon setting a value in this
+     entry, length of this field value must be 6-70.
+     Password of length 0 will always be returned on GET operations."
+     ::=  { rlSshClientPasswordChangeEntry  5 }
+
+rlSshClientPasswordChangeStatus   OBJECT-TYPE
+   SYNTAX INTEGER  {
+        inProgress(1),
+        succeeded(2),
+        failed(3),
+        noData(4)
+   }
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+    "Specifies the status of last password change operation on remote server
+    identified by rlSshClientPasswordChangeInetAddress. In case this data was
+    erased (3 or more password change operations have been performed since
+    the operation on this server), the status will be 'noData'."
+     ::=  { rlSshClientPasswordChangeEntry  6 }
+
+rlSshClientPasswordChangeFailureReason   OBJECT-TYPE
+   SYNTAX DisplayString
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+    "In case the value of rlSshClientPasswordChangeStatus is 'failed', this
+     field will contain the failure reason."
+     ::=  { rlSshClientPasswordChangeEntry  7 }
+
+rlSshClientDeleteSelfKey OBJECT-TYPE
+    SYNTAX  RlSshPublicKeyAlgorithm
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+           "Setting to a value other than 'none' results in deleting the client self
+           key of the chosen type."
+      ::= { rlSshClient 8 }
+
+rlSshClientImportExportSelfKeyTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshClientImportExportSelfKeyEntry
+   MAX-ACCESS     not-accessible
+   STATUS     current
+   DESCRIPTION
+    "This table can be used for 2 purposes:
+     1) Importing public/private key pair to serve as the device key when acting
+     as SSH client. This is done by setting entries to this table, according to
+     the specified format. When the last entry (footer) is set, the whole key
+     pair is checked and if valid, stored in CDB.
+     2) Exporting the device SSH client public/private key. This can be done by
+     performing GetNext operations on this table."
+    ::= { rlSshClient 9 }
+
+rlSshClientImportExportSelfKeyEntry  OBJECT-TYPE
+   SYNTAX RlSshClientImportExportSelfKeyEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshClientImportExportSelfKeyAlgorithm,
+           rlSshClientImportExportSelfKeyFormat,
+           rlSshClientImportExportSelfKeyFragmentId}
+   ::= { rlSshClientImportExportSelfKeyTable 1 }
+
+RlSshClientImportExportSelfKeyEntry ::= SEQUENCE {
+  rlSshClientImportExportSelfKeyAlgorithm       RlSshPublicKeyAlgorithm,
+  rlSshClientImportExportSelfKeyFormat          INTEGER,
+  rlSshClientImportExportSelfKeyFragmentId      INTEGER,
+  rlSshClientImportExportSelfKeyFragmentText    OCTET STRING
+}
+
+rlSshClientImportExportSelfKeyAlgorithm   OBJECT-TYPE
+   SYNTAX RlSshPublicKeyAlgorithm
+   MAX-ACCESS   not-accessible
+   STATUS current
+   DESCRIPTION
+    "Identifies the type of key pair."
+     ::=  { rlSshClientImportExportSelfKeyEntry  1 }
+
+rlSshClientImportExportSelfKeyFormat   OBJECT-TYPE
+   SYNTAX INTEGER {
+            uuencoded-format(1)
+           }
+
+   MAX-ACCESS   not-accessible
+   STATUS current
+   DESCRIPTION
+    "Specifies the format of public/key pair. The following formats are
+    supported for import/export:
+    1) uuencoded_format - in this format both private and public key are in
+    uu-encoded format, and are seperated from one another by header and footer.
+    An example of the concateneation of all fragments in this format is:
+    -----BEGIN ENCRYPTED RSA PRIVATE KEY-----
+    tDaNkZZoCxXfkLLsLDlZ6T9H8U4Gz637eRV7BYBpapkidAxY1UG0/qgfKLPkbId4wzht6ArV9bE4fMtX
+    wSMOxL3q31pOmUdVhjbWYcgZQBDy1DjFSbuIEdP85c96B9bBE2nPv90mSvb/6j8R2NItT/KJeiYMtLtI
+    N3m6/zESKJGIrX0jP1RFDjVZSS5chSAFgB0egsLZEyOQn7jAqpX/x/easD2J6F/OjPXlJ9Hff2tMb3NU
+    QYyBoWH2J9IxhWB6Vo66R9Y04JGR18uL/rV2sMCtpg5ppkVTEpNTp9qE1yXocR2NmzUfNFap+GJ4IHj8
+    CzkVfmJM/kEWaJsYgHbAgLyRg4QVyelfobv1B71aQ+u1z9KGu/QajkWdR04OQfsGOL1CvU2LGYDcRjfH
+    jv+jl/UkDRRjoD9kt2WvouT+OL6esvKl0OJBqWbGNXg9TWv/VLtJIwgUno+MLaJuOM4Fh44+wpnqUXwQ
+    TFtBFc8pzt5BoOwbv9gXpicTkq4/+GhwXWXxSVFebKhnHAvKSLT+Ba7K7ZeR8EIIxbXdDNFOiS45R2KI
+    jxxXLXK44u6KGl5MygCKXUOFlJ+Zhgrq6ZH17z/RVJQ2CWqb5Ekn9GY3kH9QZ3mb4MDPfriWi2lHGXHY
+    JmJd4SLQhpBdnOS5tu84QmyU3dNbAdzghDsR+dEY/6g7Cn0kcVkeHNZ0H+mCZik5f6XBD8eplkk43bdR
+    FrkwTeAjwurGcKwdiKkR4DlfSq3DKssVBucTqUpqsKqPXLwTIL44rWKhEPXgGPB2XDG0VLvIRKkAgEGI
+    LNTwOm091Ro=
+    -----END RSA PRIVATE KEY-----
+
+    -----BEGIN RSA PUBLIC KEY-----
+    MIGHAoGBAOeIC9gRg3YaEGGMp3C00qNwLINAEDZV/J4BWM5WnWwCWZyHXDs2XiEmFu0ZONAD4gcT2f2f
+    NNfCBPye39VVuOkKQuSV0MLLX5800LZ4y1BNcPzPZHpnGaCzl7iAjhfj9MolzAh5VRjeiYt0t1um4dm+
+    q9A4BtfpJqDYxCW9uxd/AgEj
+    -----END RSA PUBLIC KEY-----
+    "
+     ::=  { rlSshClientImportExportSelfKeyEntry  2 }
+
+rlSshClientImportExportSelfKeyFragmentId   OBJECT-TYPE
+   SYNTAX INTEGER
+   MAX-ACCESS   not-accessible
+   STATUS current
+   DESCRIPTION
+    "Identifies the index of this fragment in the key pair input/output."
+     ::=  { rlSshClientImportExportSelfKeyEntry  3 }
+
+rlSshClientImportExportSelfKeyFragmentText    OBJECT-TYPE
+   SYNTAX OCTET STRING
+   MAX-ACCESS   read-write
+   STATUS current
+   DESCRIPTION
+    "A part of the readable text entry for the key pair input/output."
+     ::=  { rlSshClientImportExportSelfKeyEntry  4 }
+
+
+rlSshClientRemoteServerPublicKeyFingerprintTable OBJECT-TYPE
+   SYNTAX SEQUENCE OF RlSshClientRemoteServerPublicKeyFingerprintEntry
+   MAX-ACCESS     not-accessible
+   STATUS     current
+   DESCRIPTION
+    "Table for storing fingerprints of remote servers public keys. It is used for
+     the purpose of server authentication. An entry can be inserted to this table
+     either explicitly by user configuration, or during copy operation, after
+     user's approval."
+    ::= { rlSshClient 10 }
+
+rlSshClientRemoteServerPublicKeyFingerprintEntry  OBJECT-TYPE
+   SYNTAX RlSshClientRemoteServerPublicKeyFingerprintEntry
+   MAX-ACCESS   not-accessible
+   STATUS       current
+   DESCRIPTION
+       " The row definition for this table."
+   INDEX { rlSshClientRemoteServerFingerprintInetAddrType,
+           rlSshClientRemoteServerFingerprintInetAddr,
+           rlSshClientRemoteServerFingerprint }
+   ::= { rlSshClientRemoteServerPublicKeyFingerprintTable 1 }
+
+RlSshClientRemoteServerPublicKeyFingerprintEntry ::= SEQUENCE {
+  rlSshClientRemoteServerFingerprintInetAddrType  InetAddressType,
+  rlSshClientRemoteServerFingerprintInetAddr      InetAddress,
+  rlSshClientRemoteServerFingerprint              OCTET STRING,
+  rlSshClientRemoteServerFingerprintStatus        RowStatus
+}
+
+rlSshClientRemoteServerFingerprintInetAddrType   OBJECT-TYPE
+   SYNTAX InetAddressType
+   MAX-ACCESS   not-accessible
+   STATUS current
+   DESCRIPTION
+    "Remote server inet address type."
+     ::=  { rlSshClientRemoteServerPublicKeyFingerprintEntry  1 }
+
+rlSshClientRemoteServerFingerprintInetAddr     OBJECT-TYPE
+   SYNTAX InetAddress
+   MAX-ACCESS   not-accessible
+   STATUS current
+   DESCRIPTION
+    "Remote server inet address."
+     ::=  { rlSshClientRemoteServerPublicKeyFingerprintEntry  2 }
+
+rlSshClientRemoteServerFingerprint     OBJECT-TYPE
+   SYNTAX OCTET STRING(SIZE(16))
+   MAX-ACCESS   read-create
+   STATUS current
+   DESCRIPTION
+    "Remote server fingerprint."
+     ::=  { rlSshClientRemoteServerPublicKeyFingerprintEntry  3 }
+
+rlSshClientRemoteServerFingerprintStatus     OBJECT-TYPE
+   SYNTAX RowStatus
+   MAX-ACCESS   read-create
+   STATUS current
+   DESCRIPTION
+    "Row status for this row."
+     ::=  { rlSshClientRemoteServerPublicKeyFingerprintEntry  4 }
+
+rlSshClientRemoteServersAuthenticationEnable OBJECT-TYPE
+    SYNTAX   INTEGER {
+        enable(1),
+        disable(2)
+    }
+    MAX-ACCESS      read-write
+    STATUS current
+    DESCRIPTION
+     "Setting this field to 'enable' enables remote servers authentication.
+     As a result, while opening a session with a remote server, the fingerprint
+     of the remote server will be computed and looked for in the table
+     rlSshClientRemoteServerPublicKeyFingerprintTable. If an entry with the key
+     (server-inet-address, server-fingerprint) is found, the server is considered
+     authenticated. Otherwise, the server is not authenticated (unless the user
+     specifically approved this server can be trusted)."
+      ::= { rlSshClient 11 }
+
+rlSshClientDefaultKeyFlag OBJECT-TYPE
+    SYNTAX  INTEGER {
+           rsa(1),
+           dsa(2),
+           rsa-dsa(3),
+           ec(4),
+           all(99),
+           none(100)
+    }
+    MAX-ACCESS      read-only
+    STATUS current
+    DESCRIPTION
+        "This scalar indicates which of the SSH client keys are default keys
+         (automatically generated)."
+    ::= { rlSshClient 12 }
+END
+