diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/dasan/SLE-NETWORK-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/dasan/SLE-NETWORK-MIB')
| -rw-r--r-- | MIBS/dasan/SLE-NETWORK-MIB | 5082 |
1 files changed, 5082 insertions, 0 deletions
diff --git a/MIBS/dasan/SLE-NETWORK-MIB b/MIBS/dasan/SLE-NETWORK-MIB new file mode 100644 index 0000000..86770c0 --- /dev/null +++ b/MIBS/dasan/SLE-NETWORK-MIB @@ -0,0 +1,5082 @@ +--
+-- sle-network-mib.mib
+-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
+-- Monday, April 18, 2016 at 15:57:25
+--
+
+ SLE-NETWORK-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ sleMgmt
+ FROM DASAN-SMI
+ IANAtunnelType
+ FROM IANAifType-MIB
+ InterfaceIndex
+ FROM IF-MIB
+ InetAddress, InetAddressType
+ FROM INET-ADDRESS-MIB
+ SleControlStatusType, SleControlRequestResultType
+ FROM SLE-TC-MIB
+ OBJECT-GROUP, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ TimeTicks, IpAddress, Integer32, Unsigned32, Gauge32,
+ Counter64, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+ MacAddress
+ FROM SNMPv2-TC;
+
+
+ sleNetwork MODULE-IDENTITY
+ LAST-UPDATED "200412291441Z" -- December 29, 2004 at 14:41 GMT
+ ORGANIZATION
+ "HANASOFT"
+ CONTACT-INFO
+ " "
+ DESCRIPTION
+ "This MIB contains all needed informations about DHCP and
+ all supported sle DHCP features."
+ REVISION "200412101632Z" -- December 10, 2004 at 16:32 GMT
+ DESCRIPTION
+ "Description"
+ ::= { sleMgmt 11 }
+
+
+
+
+--
+-- Node definitions
+--
+
+ sleNetInterface OBJECT IDENTIFIER ::= { sleNetwork 1 }
+
+
+ sleNetIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleNetIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetInterface 1 }
+
+
+ sleNetIfEntry OBJECT-TYPE
+ SYNTAX SleNetIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex }
+ ::= { sleNetIfTable 1 }
+
+
+ SleNetIfEntry ::=
+ SEQUENCE {
+ sleNetIfIndex
+ Integer32,
+ sleNetIfName
+ OCTET STRING,
+ sleNetIfDescription
+ OCTET STRING,
+ sleNetIfTableIndex
+ InterfaceIndex,
+ sleNetIfRegState
+ INTEGER,
+ sleNetIfAdminState
+ INTEGER,
+ sleNetIfOperState
+ INTEGER,
+ sleNetIfMulticast
+ INTEGER,
+ sleNetIfMtu
+ INTEGER,
+ sleNetIfIpSetMode
+ INTEGER,
+ sleNetIfIpMartianFilter
+ INTEGER,
+ sleNetIfUpCnt
+ Integer32,
+ sleNetIfDownCnt
+ Integer32,
+ sleNetIfLinkUpTime
+ Counter64,
+ sleNetIfElapsedTimeAfterClearStats
+ Counter64,
+ sleNetIfBindingVRFName
+ OCTET STRING,
+ sleNetIfOnFailUseVRF
+ INTEGER,
+ sleNetIfIpUnreachability
+ INTEGER,
+ sleNetIfipRedirects
+ INTEGER,
+ sleNetIfIpForwarding
+ INTEGER,
+ sleNetIfAlias
+ OCTET STRING,
+ sleNetIfIpArpAlias
+ INTEGER,
+ sleNetIfIpArpAliasMac
+ MacAddress,
+ sleNetIfArpMCProbeCount
+ Integer32,
+ sleNetIfArpUCProbeCount
+ Integer32,
+ sleNetIfArpRetransTime
+ Integer32,
+ sleNetIfIpProxyArp
+ INTEGER,
+ sleNetIfIpRPFilter
+ INTEGER,
+ sleNetIfRPFilter
+ INTEGER,
+ sleNetIfRouteMap
+ OCTET STRING
+ }
+
+ sleNetIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..11023)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Network interface index
+ 0 : any(all)
+ 1..4094 : VLAN
+ 4095 : management
+ 4096 : loopback
+ 4097 : NULL device
+ 10000..11023: Tunnel interface index
+ "
+ ::= { sleNetIfEntry 1 }
+
+
+ sleNetIfName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..8))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Device Name of this Interface."
+ ::= { sleNetIfEntry 2 }
+
+
+ sleNetIfDescription OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description of this interface."
+ ::= { sleNetIfEntry 3 }
+
+
+ sleNetIfTableIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Same as ifIndex (for appropriated ifTable entries)."
+ ::= { sleNetIfEntry 4 }
+
+
+ sleNetIfRegState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ unregistered(0),
+ registered(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Registered state of Network device."
+ ::= { sleNetIfEntry 5 }
+
+
+ sleNetIfAdminState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ down(0),
+ up(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Administrative state.
+ down - shutdown
+ up - noshutdown"
+ ::= { sleNetIfEntry 6 }
+
+
+ sleNetIfOperState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ down(0),
+ up(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Operational state.
+ down - shutdown or not running
+ up - running"
+ ::= { sleNetIfEntry 7 }
+
+
+ sleNetIfMulticast OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Multicast enable/disable state."
+ ::= { sleNetIfEntry 8 }
+
+
+ sleNetIfMtu OBJECT-TYPE
+ SYNTAX INTEGER (64..17940)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum Transmission Unit."
+ ::= { sleNetIfEntry 9 }
+
+
+ sleNetIfIpSetMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(0),
+ dynamic(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP address setting mode.
+ 0 : static
+ 1 : dynamic (by DHCP client)
+ "
+ ::= { sleNetIfEntry 10 }
+
+
+ sleNetIfIpMartianFilter OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfEntry 11 }
+
+
+ sleNetIfUpCnt OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The times of link-up event."
+ ::= { sleNetIfEntry 12 }
+
+
+ sleNetIfDownCnt OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The times of link-down event."
+ ::= { sleNetIfEntry 13 }
+
+
+ sleNetIfLinkUpTime OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "1 sec"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The elapsed time after link is up."
+ ::= { sleNetIfEntry 14 }
+
+
+ sleNetIfElapsedTimeAfterClearStats OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "1 sec"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The elapsed time after clearing status."
+ ::= { sleNetIfEntry 15 }
+
+
+ sleNetIfBindingVRFName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VRF name that this tunnel interface is binding."
+ ::= { sleNetIfEntry 16 }
+
+
+ sleNetIfOnFailUseVRF OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Lookup into a global routing table when the VRF routing table lookup was failed."
+ ::= { sleNetIfEntry 17 }
+
+
+ sleNetIfIpUnreachability OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP unreachability ON/OFF
+ "
+ DEFVAL { 1 }
+ ::= { sleNetIfEntry 18 }
+
+
+ sleNetIfipRedirects OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfEntry 19 }
+
+
+ sleNetIfIpForwarding OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP forwarding status"
+ ::= { sleNetIfEntry 20 }
+
+
+ sleNetIfAlias OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "lias Name for the Interface"
+ ::= { sleNetIfEntry 21 }
+
+
+ sleNetIfIpArpAlias OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Arp Alias state"
+ ::= { sleNetIfEntry 22 }
+
+
+ sleNetIfIpArpAliasMac OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Arp Alias MAC"
+ ::= { sleNetIfEntry 23 }
+
+
+ sleNetIfArpMCProbeCount OBJECT-TYPE
+ SYNTAX Integer32 (2..10)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ARP request Multicast probe count"
+ ::= { sleNetIfEntry 24 }
+
+
+ sleNetIfArpUCProbeCount OBJECT-TYPE
+ SYNTAX Integer32 (2..10)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "ARP request Unicast probe count"
+ ::= { sleNetIfEntry 25 }
+
+
+ sleNetIfArpRetransTime OBJECT-TYPE
+ SYNTAX Integer32 (1..300)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Retrans time of ARP request (unit: 1s)"
+ ::= { sleNetIfEntry 26 }
+
+
+ sleNetIfIpProxyArp OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Proxy Arp state"
+ ::= { sleNetIfEntry 27 }
+
+
+ sleNetIfIpRPFilter OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ loose(1),
+ strict(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Reverse Path Filtering of CPU"
+ ::= { sleNetIfEntry 28 }
+
+
+ sleNetIfRPFilter OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ loose(1),
+ strict(2),
+ looseAllow(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Reverse Path Filtering of CHIP (default : looseAllow)"
+ ::= { sleNetIfEntry 29 }
+
+
+ sleNetIfRouteMap OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "IP Policy route-map name"
+ ::= { sleNetIfEntry 30 }
+
+
+ sleNetIfControl OBJECT IDENTIFIER ::= { sleNetInterface 2 }
+
+
+ sleNetIfControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ setNetIfRegState(1),
+ setNetIfProfile(2),
+ setNetIfIpMartianFilter(3),
+ setNetIfBindingVRF(4),
+ unsetNetIfBindingVRF(5),
+ setNetIfOnFailUseVRF(6),
+ setNetIfIpUnreachability(7),
+ setNetIfIpRedirects(8),
+ setNetIfIpForwarding(9),
+ setAlias(10),
+ setIpArpAlias(11),
+ setArpMCProbeCount(12),
+ setArpUCProbeCount(13),
+ setArpRetransTime(14),
+ setIpProxyArp(15),
+ setIpRPFilter(16),
+ setRPFilter(17),
+ setRouteMap(18)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ DEFVAL { setNetIfProfile }
+ ::= { sleNetIfControl 1 }
+
+
+ sleNetIfControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleNetIfControl 2 }
+
+
+ sleNetIfControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ DEFVAL { 0 }
+ ::= { sleNetIfControl 3 }
+
+
+ sleNetIfControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleNetIfControl 4 }
+
+
+ sleNetIfControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleNetIfControl 5 }
+
+
+ sleNetIfControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..11023)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Network interface index
+ 0 : any(all)
+ 1..4094 : VLAN
+ 4095 : management
+ 4096 : loopback
+ 4097 : NULL device
+ 10000..11023: Tunnel interface index"
+ ::= { sleNetIfControl 6 }
+
+
+ sleNetIfControlDescription OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..64))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description of this interface."
+ DEFVAL { "" }
+ ::= { sleNetIfControl 7 }
+
+
+ sleNetIfControlRegState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ unregister(0),
+ register(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfControl 8 }
+
+
+ sleNetIfControlAdminState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ down(0),
+ up(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Administrative state."
+ DEFVAL { up }
+ ::= { sleNetIfControl 9 }
+
+
+ sleNetIfControlMulticast OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Multicast enable/disable state."
+ DEFVAL { enable }
+ ::= { sleNetIfControl 10 }
+
+
+ sleNetIfControlMtu OBJECT-TYPE
+ SYNTAX INTEGER (64..17940)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Maximum Transmission Unit."
+ DEFVAL { 1500 }
+ ::= { sleNetIfControl 11 }
+
+
+ sleNetIfControlIpMartianFilter OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfControl 12 }
+
+
+ sleNetIfControlBindingVRFName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VRF name that this tunnel interface is binding."
+ ::= { sleNetIfControl 13 }
+
+
+ sleNetIfControlOnFailUseVRF OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Lookup into a global routing table when the VRF routing table lookup was failed."
+ ::= { sleNetIfControl 14 }
+
+
+ sleNetIfControlIpUnreachability OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP unreachability ON/OFF"
+ DEFVAL { 1 }
+ ::= { sleNetIfControl 15 }
+
+
+ sleNetIfControlIpRedirects OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfControl 16 }
+
+
+ sleNetIfControlIpForwarding OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP forwarding status"
+ ::= { sleNetIfControl 17 }
+
+
+ sleNetIfControlAlias OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Alias Name for the Interface"
+ ::= { sleNetIfControl 18 }
+
+
+ sleNetIfControlIpArpAlias OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Arp Alias state"
+ ::= { sleNetIfControl 19 }
+
+
+ sleNetIfControlIpArpAliasMac OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Arp Alias MAC"
+ ::= { sleNetIfControl 20 }
+
+
+ sleNetIfControlArpMCProbeCount OBJECT-TYPE
+ SYNTAX Integer32 (2..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "ARP request Multicast probe count"
+ ::= { sleNetIfControl 21 }
+
+
+ sleNetIfControlArpUCProbeCount OBJECT-TYPE
+ SYNTAX Integer32 (2..10)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "ARP request Unicast probe count"
+ ::= { sleNetIfControl 22 }
+
+
+ sleNetIfControlArpRetransTime OBJECT-TYPE
+ SYNTAX Integer32 (1..300)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Retrans time of ARP request (unit: 1s)"
+ ::= { sleNetIfControl 23 }
+
+
+ sleNetIfControlIpProxyArp OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Proxy Arp state"
+ ::= { sleNetIfControl 24 }
+
+
+ sleNetIfControlIpRPFilter OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ loose(1),
+ strict(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Reverse Path Filtering of CPU"
+ ::= { sleNetIfControl 25 }
+
+
+ sleNetIfControlRPFilter OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ loose(1),
+ strict(2),
+ looseAllow(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Reverse Path Filtering of CHIP (default : looseAllow)"
+ ::= { sleNetIfControl 26 }
+
+
+ sleNetIfControlRouteMap OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IP Policy route-map name"
+ ::= { sleNetIfControl 27 }
+
+
+ sleNetIfNotification OBJECT IDENTIFIER ::= { sleNetInterface 3 }
+
+
+ sleNetIfRegStateChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfRegState }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfNotification 1 }
+
+
+ sleNetIfProfileChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfDescription, sleNetIfAdminState,
+ sleNetIfMulticast, sleNetIfMtu }
+ STATUS current
+ DESCRIPTION
+ "setNetIfProfile."
+ ::= { sleNetIfNotification 2 }
+
+
+ sleNetIfIpMartianFilterChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlIndex, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIpMartianFilter
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfNotification 3 }
+
+
+ sleNetIfBindingVRFSet NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlBindingVRFName
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfNotification 4 }
+
+
+ sleNetIfBindingVRFUnset NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlBindingVRFName
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfNotification 5 }
+
+
+ sleNetIfIpOnFailUseVRFChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlOnFailUseVRF
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfNotification 6 }
+
+
+ sleNetIfIpUnreachabilityChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpUnreachability
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfNotification 7 }
+
+
+ sleNetIfIpRedirectsChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIpRedirects }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetIfNotification 8 }
+
+
+ sleNetIfIpForwardingChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpForwarding
+ }
+ STATUS current
+ DESCRIPTION
+ "setNetIfIpForwarding"
+ ::= { sleNetIfNotification 9 }
+
+
+ sleNetIfAliasChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlAlias
+ }
+ STATUS current
+ DESCRIPTION
+ "setAlias"
+ ::= { sleNetIfNotification 10 }
+
+
+ sleNetIfIpArpAliasChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpArpAlias,
+ sleNetIfControlIpArpAliasMac }
+ STATUS current
+ DESCRIPTION
+ "setIpArpAlias"
+ ::= { sleNetIfNotification 11 }
+
+
+ sleNetIfArpMCProbeCountChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlArpMCProbeCount
+ }
+ STATUS current
+ DESCRIPTION
+ "setArpMCProbeCount"
+ ::= { sleNetIfNotification 12 }
+
+
+ sleNetIfArpUCProbeCountChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlArpUCProbeCount
+ }
+ STATUS current
+ DESCRIPTION
+ "setArpUCProbeCount"
+ ::= { sleNetIfNotification 13 }
+
+
+ sleNetIfArpRetransTimeChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlArpRetransTime
+ }
+ STATUS current
+ DESCRIPTION
+ "setArpRetransTime"
+ ::= { sleNetIfNotification 14 }
+
+
+ sleNetIfIpProxyArpChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpProxyArp
+ }
+ STATUS current
+ DESCRIPTION
+ "setIpProxyArp"
+ ::= { sleNetIfNotification 15 }
+
+
+ sleNetIfIpRPFilterChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlIpRPFilter
+ }
+ STATUS current
+ DESCRIPTION
+ "setIpRPFilter"
+ ::= { sleNetIfNotification 16 }
+
+
+ sleNetIfRPFilterChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlRPFilter
+ }
+ STATUS current
+ DESCRIPTION
+ "setRPFilter"
+ ::= { sleNetIfNotification 17 }
+
+
+ sleNetIfRouteMapChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetIfControlRequest, sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlRouteMap
+ }
+ STATUS current
+ DESCRIPTION
+ "setRouteMap"
+ ::= { sleNetIfNotification 18 }
+
+
+ sleIpAddress OBJECT IDENTIFIER ::= { sleNetwork 2 }
+
+
+ sleIpAddrTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleIpAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpAddress 1 }
+
+
+ sleIpAddrEntry OBJECT-TYPE
+ SYNTAX SleIpAddrEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex, sleIpAddrValue }
+ ::= { sleIpAddrTable 1 }
+
+
+ SleIpAddrEntry ::=
+ SEQUENCE {
+ sleIpAddrValue
+ IpAddress,
+ sleIpAddrMask
+ Integer32,
+ sleIpAddrBcast
+ IpAddress,
+ sleIpAddrFlag
+ BITS,
+ sleIpAddrScope
+ INTEGER,
+ sleIpAddrIpIndex
+ INTEGER,
+ sleIpAddrUnnumUsedIp
+ INTEGER
+ }
+
+ sleIpAddrValue OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address to which this entry's addressing information pertains."
+ ::= { sleIpAddrEntry 1 }
+
+
+ sleIpAddrMask OBJECT-TYPE
+ SYNTAX Integer32 (1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The subnet mask associated with the IP address of this entry.
+ The value of the mask is an IP address with all the network
+ bits set to 1 and all the hosts bits set to 0."
+ ::= { sleIpAddrEntry 2 }
+
+
+ sleIpAddrBcast OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the least-significant bit in the IP broadcast
+ address used for sending datagrams on the (logical)
+ interface associated with the IP address of this entry.
+ For example, when the Internet standard all-ones broadcast
+ address is used, the value will be 1. This value applies
+ to both the subnet and network broadcasts addresses used
+ by the entity on this (logical) interface."
+ ::= { sleIpAddrEntry 3 }
+
+
+ sleIpAddrFlag OBJECT-TYPE
+ SYNTAX BITS
+ {
+ permanent(0),
+ tentative(1),
+ deprecated(2),
+ reserved3(3),
+ reserved4(4),
+ reserved5(5),
+ reserved6(6),
+ secondary(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpAddrEntry 4 }
+
+
+ sleIpAddrScope OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ global(0),
+ site(200),
+ link(253),
+ host(254),
+ nowhere(255)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpAddrEntry 5 }
+
+
+ sleIpAddrIpIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..1024)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Ip index for Interface Unnumbered feature enhanced.
+ If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface.
+ Interface unnumbered default setting - it get primary ip address.
+ Interface unnumbered enhanced setting - it get secondary ip address with ip-index.
+ (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)"
+ ::= { sleIpAddrEntry 6 }
+
+
+ sleIpAddrUnnumUsedIp OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ none(0),
+ used(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Check a specific IP address for using interface unnumbered feature."
+ ::= { sleIpAddrEntry 7 }
+
+
+ sleIpAddrControl OBJECT IDENTIFIER ::= { sleIpAddress 2 }
+
+
+ sleIpAddrControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ createIpAddress(1),
+ destroyIpAddress(2),
+ addIpIndex(3),
+ delIpIndex(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ ::= { sleIpAddrControl 1 }
+
+
+ sleIpAddrControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleIpAddrControl 2 }
+
+
+ sleIpAddrControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ DEFVAL { 0 }
+ ::= { sleIpAddrControl 3 }
+
+
+ sleIpAddrControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleIpAddrControl 4 }
+
+
+ sleIpAddrControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleIpAddrControl 5 }
+
+
+ sleIpAddrControlNetIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..4094 | 10000..11023)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Network interface index
+ 1..4094 : VLAN
+ 10000..11023: Tunnel interface index
+ "
+ DEFVAL { 1 }
+ ::= { sleIpAddrControl 6 }
+
+
+ sleIpAddrControlValue OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address to which this entry's addressing information pertains."
+ DEFVAL { 'ac106464'h }
+ ::= { sleIpAddrControl 7 }
+
+
+ sleIpAddrControlMask OBJECT-TYPE
+ SYNTAX Integer32 (1..32)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The subnet mask associated with the IP address of this entry. "
+ DEFVAL { 24 }
+ ::= { sleIpAddrControl 8 }
+
+
+ sleIpAddrControlFlag OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ primary(0),
+ secondary(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ DEFVAL { primary }
+ ::= { sleIpAddrControl 9 }
+
+
+ sleIpAddrControlScope OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ global(0),
+ link(253),
+ host(254)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ DEFVAL { global }
+ ::= { sleIpAddrControl 10 }
+
+
+ sleIpAddrControlIpIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..1024)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Ip index for Interface Unnumbered feature enhanced.
+ If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface.
+ Interface unnumbered default setting - it get primary ip address.
+ Interface unnumbered enhanced setting - it get secondary ip address with ip-index.
+ (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)"
+ ::= { sleIpAddrControl 11 }
+
+
+ sleIpAddrNotification OBJECT IDENTIFIER ::= { sleIpAddress 3 }
+
+
+ sleIpAddressCreated NOTIFICATION-TYPE
+ OBJECTS { sleIpAddrControlRequest, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrMask, sleIpAddrFlag,
+ sleIpAddrScope }
+ STATUS current
+ DESCRIPTION
+ "createIpAddress."
+ ::= { sleIpAddrNotification 1 }
+
+
+ sleIpAddressDestroyed NOTIFICATION-TYPE
+ OBJECTS { sleIpAddrControlRequest, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrMask }
+ STATUS current
+ DESCRIPTION
+ "destroyIpAddress."
+ ::= { sleIpAddrNotification 2 }
+
+
+ sleIpAddressIpIndexAdded NOTIFICATION-TYPE
+ OBJECTS { sleIpAddrControlRequest, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrControlNetIfIndex, sleIpAddrControlValue,
+ sleIpAddrControlMask, sleIpAddrControlIpIndex }
+ STATUS current
+ DESCRIPTION
+ "addIpIndex"
+ ::= { sleIpAddrNotification 3 }
+
+
+ sleIpAddressIpIndexDeleted NOTIFICATION-TYPE
+ OBJECTS { sleIpAddrControlRequest, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrControlNetIfIndex, sleIpAddrControlIpIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "delIpIndex"
+ ::= { sleIpAddrNotification 4 }
+
+
+ sleArp OBJECT IDENTIFIER ::= { sleNetwork 3 }
+
+
+ sleArpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleArpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleArp 1 }
+
+
+ sleArpEntry OBJECT-TYPE
+ SYNTAX SleArpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex, sleArpIpAddress }
+ ::= { sleArpTable 1 }
+
+
+ SleArpEntry ::=
+ SEQUENCE {
+ sleArpIpAddress
+ IpAddress,
+ sleArpPhyAddress
+ MacAddress,
+ sleArpPortIndex
+ Integer32,
+ sleArpState
+ INTEGER,
+ sleArpHwType
+ INTEGER,
+ sleArpHwUsed
+ INTEGER,
+ sleArpUsedTime
+ INTEGER
+ }
+
+ sleArpIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The NetworkAddress (e.g., the IP address) corresponding
+ to the media-dependent `physical' address."
+ ::= { sleArpEntry 1 }
+
+
+ sleArpPhyAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The media-dependent `physical' address."
+ ::= { sleArpEntry 2 }
+
+
+ sleArpPortIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The interface on which this entry's equivalence is effective.
+ 0: for any ports."
+ ::= { sleArpEntry 3 }
+
+
+ sleArpState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(0),
+ dynamic(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Arp entry's currently status."
+ ::= { sleArpEntry 4 }
+
+
+ sleArpHwType OBJECT-TYPE
+ SYNTAX INTEGER { ethernet(1) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hardware Type of media."
+ ::= { sleArpEntry 5 }
+
+
+ sleArpHwUsed OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ nonused(0),
+ used(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Arp entry's currently chip usage state."
+ ::= { sleArpEntry 6 }
+
+
+ sleArpUsedTime OBJECT-TYPE
+ SYNTAX INTEGER (1..10000000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Arp entry's chip used time.(if sleArpState is 0, always 0 and if sleArpHwUsed is 0, always 0.)"
+ ::= { sleArpEntry 7 }
+
+
+ sleArpControl OBJECT IDENTIFIER ::= { sleArp 2 }
+
+
+ sleArpControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ createArpEntry(1),
+ destroyArpEntry(2),
+ clearArpTable(3),
+ clearArpTableByAddr(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ ::= { sleArpControl 1 }
+
+
+ sleArpControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleArpControl 2 }
+
+
+ sleArpControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ ::= { sleArpControl 3 }
+
+
+ sleArpControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleArpControl 4 }
+
+
+ sleArpControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleArpControl 5 }
+
+
+ sleArpControlNetIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..4096)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Network interface index."
+ ::= { sleArpControl 6 }
+
+
+ sleArpControlIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The NetworkAddress (e.g., the IP address) corresponding
+ to the media-dependent `physical' address."
+ ::= { sleArpControl 7 }
+
+
+ sleArpControlPhyAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The media-dependent `physical' address."
+ ::= { sleArpControl 8 }
+
+
+ sleArpControlState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ static(0),
+ dynamic(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Arp entry's currently status."
+ ::= { sleArpControl 9 }
+
+
+ sleArpControlMask OBJECT-TYPE
+ SYNTAX INTEGER (0..32)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleArpControl 10 }
+
+
+ sleArpNotification OBJECT IDENTIFIER ::= { sleArp 3 }
+
+
+ sleArpEntryCreated NOTIFICATION-TYPE
+ OBJECTS { sleArpControlRequest, sleArpControlTimeStamp, sleArpControlReqResult, sleArpPhyAddress }
+ STATUS current
+ DESCRIPTION
+ "createArpEntry."
+ ::= { sleArpNotification 1 }
+
+
+ sleArpEntryDestroyed NOTIFICATION-TYPE
+ OBJECTS { sleArpControlRequest, sleArpControlTimeStamp, sleArpControlReqResult, sleArpPhyAddress }
+ STATUS current
+ DESCRIPTION
+ "destroyArpEntry."
+ ::= { sleArpNotification 2 }
+
+
+ sleArpTableCleared NOTIFICATION-TYPE
+ OBJECTS { sleArpControlRequest, sleArpControlTimeStamp, sleArpControlReqResult, sleArpState }
+ STATUS current
+ DESCRIPTION
+ "clearArpTable.
+ In this notification PDU, key of sleArpState
+ is ifindex.0.0.0.0."
+ ::= { sleArpNotification 3 }
+
+
+ sleArpTableClearedByAddr NOTIFICATION-TYPE
+ OBJECTS { sleArpControlRequest, sleArpControlTimeStamp, sleArpControlReqResult, sleArpControlIpAddress, sleArpControlMask,
+ sleArpControlState }
+ STATUS current
+ DESCRIPTION
+ "clearArpTableByAddr"
+ ::= { sleArpNotification 4 }
+
+
+ sleRoute OBJECT IDENTIFIER ::= { sleNetwork 4 }
+
+
+ sleRouteTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleRoute 1 }
+
+
+ sleRouteEntry OBJECT-TYPE
+ SYNTAX SleRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleRouteDstAddress, sleRouteDstMask, sleRouteGateway, sleRouteInterface, sleRouteVRFIndex
+ }
+ ::= { sleRouteTable 1 }
+
+
+ SleRouteEntry ::=
+ SEQUENCE {
+ sleRouteDstAddress
+ IpAddress,
+ sleRouteDstMask
+ INTEGER,
+ sleRouteGateway
+ IpAddress,
+ sleRouteInterface
+ INTEGER,
+ sleRouteType
+ INTEGER,
+ sleRouteProto
+ INTEGER,
+ sleRouteMetric
+ INTEGER,
+ sleRouteActive
+ INTEGER,
+ sleRouteBindingSrcAddr
+ IpAddress,
+ sleRouteDistance
+ INTEGER,
+ sleRouteSubtype
+ INTEGER,
+ sleRouteNexthopStatus
+ BITS,
+ sleRouteRibStatus
+ BITS,
+ sleRouteVRFIndex
+ Integer32
+ }
+
+ sleRouteDstAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The destination IP address of this route.
+ An entry with a value of 0.0.0.0 is considered a default route.
+ Multiple routes to a single destination can appear in the table,
+ but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use."
+ ::= { sleRouteEntry 1 }
+
+
+ sleRouteDstMask OBJECT-TYPE
+ SYNTAX INTEGER (0..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicate the mask to be logical-ANDed with the destination address
+ before being compared to the value in the sleRouteDstAddress field.
+ For those systems that do not support arbitrary subnet masks,
+ an agent constructs the value of the sleRouteDstMask
+ by determining whether the value of the correspondent sleRouteDstAddress field
+ belong to a class-A, B, or C network.
+ If the value of the sleRouteDstAddress is 0.0.0.0 (a default route),
+ then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism."
+ ::= { sleRouteEntry 2 }
+
+
+ sleRouteGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Gateway IP Address.
+ 0.0.0.0/0 : indicate default gateway or invalid"
+ ::= { sleRouteEntry 3 }
+
+
+ sleRouteInterface OBJECT-TYPE
+ SYNTAX INTEGER (0..11023)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index value which uniquely identifies
+ the local interface through
+ which the next hop of this route
+ should be reached.
+ The interface identified by a particular
+ value of this index is the same interface
+ as identified by the same value of
+ sleNetIfIndex.
+
+ Network interface index
+ 0: invalid
+ 1..4094: VLAN
+ 4095: management
+ 4096: loopback
+ 4097: NULL device
+ 10000..11023: Tunnel interface index"
+ ::= { sleRouteEntry 4 }
+
+
+ sleRouteType OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ invalid(2),
+ direct(3),
+ indirect(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The type of route.
+ Note that the values direct and indirect refer to the notion of direct
+ and indirect routing in the IP architecture.
+ Setting this object to the value invalid has the effect of invalidating the corresponding entry
+ in the sleRouteTable object.
+ That is, it effectively dissasociates the destination identified
+ with said entry from the route identified with said entry.
+ It is an implementation-specific matter as to whether the agent removes an invalidated entry
+ from the table. Accordingly,
+ management stations must be prepared to receive tabular information
+ from agents that corresponds to entries not currently in use.
+ Proper interpretation of such entries requires examination of the relevant sleRouteType object."
+ ::= { sleRouteEntry 5 }
+
+
+ sleRouteProto OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ other(1),
+ localDirect(2),
+ netmgmtStatic(3),
+ icmp(4),
+ egp(5),
+ ggp(6),
+ hello(7),
+ rip(8),
+ isIs(9),
+ esIs(10),
+ ciscoIgrp(11),
+ bbnSpfIgp(12),
+ ospf(13),
+ bgp(14),
+ idpr(15),
+ ciscoEigrp(16),
+ dhcp(17)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The routing mechanism via which this route was learned.
+ Inclusion of values for gateway routing protocols is not intended to imply
+ that hosts should support those protocols."
+ ::= { sleRouteEntry 6 }
+
+
+ sleRouteMetric OBJECT-TYPE
+ SYNTAX INTEGER (-1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The primary routing metric for this route.
+ The semantics of this metric are determined
+ by the routing-protocol specified
+ in the route's sleRouteProto value.
+ If this metric is not used,
+ its value should be set to -1."
+ ::= { sleRouteEntry 7 }
+
+
+ sleRouteActive OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ inactive(0),
+ active(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The active status for this routing entry."
+ ::= { sleRouteEntry 8 }
+
+
+ sleRouteBindingSrcAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The binding source IP Address for this route."
+ ::= { sleRouteEntry 9 }
+
+
+ sleRouteDistance OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Distance value for this route."
+ ::= { sleRouteEntry 10 }
+
+
+ sleRouteSubtype OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ unknown(0),
+ ospfIa(1),
+ ospfNssa1(2),
+ ospfNssa2(3),
+ ospfExternal1(4),
+ ospfExternal2(5),
+ isisL1(8),
+ isisL2(9),
+ isisIa(10),
+ bgpMpls(11)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The subtype of this route."
+ ::= { sleRouteEntry 11 }
+
+
+ sleRouteNexthopStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ active(0),
+ fib(1),
+ recursive(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The nexthop status of this route."
+ ::= { sleRouteEntry 12 }
+
+
+ sleRouteRibStatus OBJECT-TYPE
+ SYNTAX BITS
+ {
+ internal(0),
+ selfroute(1),
+ blackhole(2),
+ nonfib(3),
+ selected(4),
+ changed(5),
+ static(6),
+ stale(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The rib status for this route."
+ ::= { sleRouteEntry 13 }
+
+
+ sleRouteVRFIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VRF index in sleIpVRFTable."
+ ::= { sleRouteEntry 14 }
+
+
+ sleRouteControl OBJECT IDENTIFIER ::= { sleRoute 2 }
+
+
+ sleRouteControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ createStaticRoute(1),
+ destroyStaticRoute(2),
+ setStaticRouteProfile(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ ::= { sleRouteControl 1 }
+
+
+ sleRouteControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleRouteControl 2 }
+
+
+ sleRouteControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ ::= { sleRouteControl 3 }
+
+
+ sleRouteControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleRouteControl 4 }
+
+
+ sleRouteControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleRouteControl 5 }
+
+
+ sleRouteControlDstAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The destination IP address of this route.
+ An entry with a value of 0.0.0.0 is considered a default route.
+ Multiple routes to a single destination can appear in the table,
+ but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use."
+ ::= { sleRouteControl 6 }
+
+
+ sleRouteControlDstMask OBJECT-TYPE
+ SYNTAX INTEGER (0..32)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicate the mask to be logical-ANDed with the destination address
+ before being compared to the value in the sleRouteDstAddress field.
+ For those systems that do not support arbitrary subnet masks,
+ an agent constructs the value of the sleRouteDstMask
+ by determining whether the value of the correspondent sleRouteDstAddress field
+ belong to a class-A, B, or C network.
+ If the value of the sleRouteDstAddress is 0.0.0.0 (a default route),
+ then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism."
+ ::= { sleRouteControl 7 }
+
+
+ sleRouteControlGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Gateway IP Address.
+ 0.0.0.0/0 : indicate default gateway or invalid"
+ ::= { sleRouteControl 8 }
+
+
+ sleRouteControlInterface OBJECT-TYPE
+ SYNTAX INTEGER (0..11023)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Network interface index
+ 0: invalid
+ 1..4094: VLAN
+ 4095: management
+ 4096: loopback
+ 4097: NULL device
+ 10000..11023: Tunnel interface index
+ To config interface, sleRouteControlGateway have to be removed."
+ ::= { sleRouteControl 9 }
+
+
+ sleRouteControlBindingSrcAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The binding source IP Address for this route."
+ ::= { sleRouteControl 10 }
+
+
+ sleRouteControlDistance OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Distance value for this route."
+ DEFVAL { 1 }
+ ::= { sleRouteControl 11 }
+
+
+ sleRouteControlVRFIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VRF index in sleIpVRFTable."
+ ::= { sleRouteControl 12 }
+
+
+ sleRouteNotification OBJECT IDENTIFIER ::= { sleRoute 3 }
+
+
+ sleRouteStaticCreated NOTIFICATION-TYPE
+ OBJECTS { sleRouteControlRequest, sleRouteControlTimeStamp, sleRouteControlReqResult, sleRouteControlDstAddress, sleRouteControlDstMask,
+ sleRouteControlGateway, sleRouteControlInterface, sleRouteControlBindingSrcAddr, sleRouteControlDistance, sleRouteControlVRFIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "createStaticRoute"
+ ::= { sleRouteNotification 1 }
+
+
+ sleRouteStaticDestroyed NOTIFICATION-TYPE
+ OBJECTS { sleRouteControlRequest, sleRouteControlTimeStamp, sleRouteControlReqResult, sleRouteControlDstAddress, sleRouteControlDstMask,
+ sleRouteControlGateway, sleRouteControlInterface, sleRouteControlVRFIndex }
+ STATUS current
+ DESCRIPTION
+ "destroyStaticRoute"
+ ::= { sleRouteNotification 2 }
+
+
+ sleRouteStaticProfileChanged NOTIFICATION-TYPE
+ OBJECTS { sleRouteControlRequest, sleRouteControlTimeStamp, sleRouteControlReqResult, sleRouteControlDstAddress, sleRouteControlDstMask,
+ sleRouteControlGateway, sleRouteControlInterface, sleRouteControlBindingSrcAddr, sleRouteControlDistance, sleRouteControlVRFIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "setStaticRouteProfile"
+ ::= { sleRouteNotification 3 }
+
+
+ sleDhcpClient OBJECT IDENTIFIER ::= { sleNetwork 5 }
+
+
+ sleDhcpClTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleDhcpClEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleDhcpClient 1 }
+
+
+ sleDhcpClEntry OBJECT-TYPE
+ SYNTAX SleDhcpClEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex }
+ ::= { sleDhcpClTable 1 }
+
+
+ SleDhcpClEntry ::=
+ SEQUENCE {
+ sleDhcpClMode
+ INTEGER,
+ sleDhcpClIpAddr
+ IpAddress,
+ sleDhcpClNetmask
+ IpAddress,
+ sleDhcpClGateway
+ IpAddress,
+ sleDhcpClDnsServer
+ IpAddress,
+ sleDhcpClServer
+ IpAddress,
+ sleDhcpClClientId
+ OCTET STRING,
+ sleDhcpClClientIdStyle
+ INTEGER,
+ sleDhcpClClassId
+ OCTET STRING,
+ sleDhcpClClassIdStyle
+ INTEGER,
+ sleDhcpClLeasetime
+ Integer32,
+ sleDhcpClState
+ INTEGER
+ }
+
+ sleDhcpClMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DHCP Client activity state in this interface."
+ DEFVAL { disable }
+ ::= { sleDhcpClEntry 1 }
+
+
+ sleDhcpClIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address acquired by DHCP Client active in this interface."
+ ::= { sleDhcpClEntry 2 }
+
+
+ sleDhcpClNetmask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The subnet mask associated with the IP address acquired by DHCP Client.
+ The value of the mask is an IP address with all the network
+ bits set to 1 and all the hosts bits set to 0."
+ ::= { sleDhcpClEntry 3 }
+
+
+ sleDhcpClGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Gateway's IP address acquired by DHCP Client active in this interface."
+ ::= { sleDhcpClEntry 4 }
+
+
+ sleDhcpClDnsServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The DNS server's IP address acquired by DHCP Client active in this interface."
+ ::= { sleDhcpClEntry 5 }
+
+
+ sleDhcpClServer OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DHCP Server's IP address."
+ ::= { sleDhcpClEntry 6 }
+
+
+ sleDhcpClClientId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DHCP Client-identifier value.
+ This is used by DHCP clients to specify their unique identifier.
+ DHCP servers use this value to index their database of address bindings.
+ This value is expected to be unique for all clients in an administrative domain."
+ ::= { sleDhcpClEntry 7 }
+
+
+ sleDhcpClClientIdStyle OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ascii(0),
+ hex(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DHCP Client-identifier input style.
+ 0 : ascii string format
+ 1 : hexadecimal format"
+ DEFVAL { ascii }
+ ::= { sleDhcpClEntry 8 }
+
+
+ sleDhcpClClassId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DHCP Class identifier value.
+ This is used by DHCP clients to optionally identify the vendor
+ type and configuration of a DHCP client.
+ The information is a string of n octets, interpreted by servers.
+ Vendors may choose to define specific vendor class identifiers
+ to convey particular configuration or other identification
+ information about a client.
+ For example, the identifier may encode the client's hardware configuration."
+ ::= { sleDhcpClEntry 9 }
+
+
+ sleDhcpClClassIdStyle OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ascii(0),
+ hex(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DHCP Class identifier input style.
+ 0 : ascii string format
+ 1 : hexadecimal format"
+ DEFVAL { ascii }
+ ::= { sleDhcpClEntry 10 }
+
+
+ sleDhcpClLeasetime OBJECT-TYPE
+ SYNTAX Integer32 (120..2147483637)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The leased time for IP address acquired by DHCP Client.
+ Default lease-time: 3600s"
+ DEFVAL { 3600 }
+ ::= { sleDhcpClEntry 11 }
+
+
+ sleDhcpClState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ halt(0),
+ init(1),
+ request(3),
+ bound(4),
+ renew(5),
+ rebind(6),
+ nonactive(255)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operating status of DHCP Client."
+ DEFVAL { non-active }
+ ::= { sleDhcpClEntry 12 }
+
+
+ sleDhcpClControl OBJECT IDENTIFIER ::= { sleDhcpClient 2 }
+
+
+ sleDhcpClControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ setDhcpClMode(1),
+ setDhcpClProfile(2),
+ changeDhcpClState(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ ::= { sleDhcpClControl 1 }
+
+
+ sleDhcpClControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleDhcpClControl 2 }
+
+
+ sleDhcpClControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ ::= { sleDhcpClControl 3 }
+
+
+ sleDhcpClControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleDhcpClControl 4 }
+
+
+ sleDhcpClControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleDhcpClControl 5 }
+
+
+ sleDhcpClControlNetIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Network Interface Index."
+ DEFVAL { 1 }
+ ::= { sleDhcpClControl 6 }
+
+
+ sleDhcpClControlMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DHCP Client activity state in this interface."
+ DEFVAL { disable }
+ ::= { sleDhcpClControl 7 }
+
+
+ sleDhcpClControlClientId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..255))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DHCP Client-identifier value.
+ This is used by DHCP clients to specify their unique identifier.
+ DHCP servers use this value to index their database of address bindings.
+ This value is expected to be unique for all clients in an administrative domain."
+ ::= { sleDhcpClControl 8 }
+
+
+ sleDhcpClControlClientIdStyle OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ascii(0),
+ hex(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DHCP Client-identifier input style.
+ 0 : ascii string format
+ 1 : hexadecimal format"
+ DEFVAL { ascii }
+ ::= { sleDhcpClControl 9 }
+
+
+ sleDhcpClControlClassId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..255))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DHCP Class identifier value.
+ This is used by DHCP clients to optionally identify the vendor
+ type and configuration of a DHCP client.
+ The information is a string of n octets, interpreted by servers.
+ Vendors may choose to define specific vendor class identifiers
+ to convey particular configuration or other identification
+ information about a client.
+ For example, the identifier may encode the client's hardware configuration."
+ ::= { sleDhcpClControl 10 }
+
+
+ sleDhcpClControlClassIdStyle OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ ascii(0),
+ hex(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DHCP Class identifier input style.
+ 0 : ascii string format
+ 1 : hexadecimal format"
+ DEFVAL { ascii }
+ ::= { sleDhcpClControl 11 }
+
+
+ sleDhcpClControlLeasetime OBJECT-TYPE
+ SYNTAX Integer32 (120..2147483637)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The leased time for IP address acquired by DHCP Client.
+ Default lease-time: 3600s"
+ DEFVAL { 3600 }
+ ::= { sleDhcpClControl 12 }
+
+
+ sleDhcpClControlUpdateIP OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ remain(0),
+ renew(1),
+ release(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Update DHCP client operating status.
+ 0 : default
+ 1 : renew
+ 2 : release
+ "
+ DEFVAL { remain }
+ ::= { sleDhcpClControl 13 }
+
+
+ sleDhcpClNotification OBJECT IDENTIFIER ::= { sleDhcpClient 3 }
+
+
+ sleDhcpClModeChanged NOTIFICATION-TYPE
+ OBJECTS { sleDhcpClControlRequest, sleDhcpClControlTimeStamp, sleDhcpClControlReqResult, sleDhcpClMode }
+ STATUS current
+ DESCRIPTION
+ "setDhcpClMode."
+ ::= { sleDhcpClNotification 1 }
+
+
+ sleDhcpClProfileChanged NOTIFICATION-TYPE
+ OBJECTS { sleDhcpClControlRequest, sleDhcpClControlTimeStamp, sleDhcpClControlReqResult, sleDhcpClClientId, sleDhcpClClientIdStyle,
+ sleDhcpClClassId, sleDhcpClClassIdStyle, sleDhcpClLeasetime }
+ STATUS current
+ DESCRIPTION
+ "setDhcpClProfile."
+ ::= { sleDhcpClNotification 2 }
+
+
+ sleDhcpClStateChanged NOTIFICATION-TYPE
+ OBJECTS { sleDhcpClControlRequest, sleDhcpClControlTimeStamp, sleDhcpClControlReqResult, sleDhcpClState }
+ STATUS current
+ DESCRIPTION
+ "ChangeDhcpClState."
+ ::= { sleDhcpClNotification 3 }
+
+
+ sleV2DhcpClient OBJECT IDENTIFIER ::= { sleNetwork 6 }
+
+
+ sleNetworkBase OBJECT IDENTIFIER ::= { sleNetwork 7 }
+
+
+ sleNetworkBaseInfo OBJECT IDENTIFIER ::= { sleNetworkBase 1 }
+
+
+ sleNetworkArpAgingTime OBJECT-TYPE
+ SYNTAX INTEGER (10..2147483637)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "System Arp Aging Time"
+ ::= { sleNetworkBaseInfo 1 }
+
+
+ sleNetworkBaseVrfDynamicForwardBinding OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ vrrp(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseInfo 2 }
+
+
+ sleNetworkBaseControl OBJECT IDENTIFIER ::= { sleNetworkBase 2 }
+
+
+ sleNetworkControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ setArpProfile(1),
+ setVrfForwdDynamicStatus(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseControl 1 }
+
+
+ sleNetworkControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseControl 2 }
+
+
+ sleNetworkControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseControl 3 }
+
+
+ sleNetworkControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseControl 4 }
+
+
+ sleNetworkControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseControl 5 }
+
+
+ sleNetworkControlArpAgingTime OBJECT-TYPE
+ SYNTAX INTEGER (10..2147483637)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseControl 6 }
+
+
+ sleNetworkControlVrfDynamicForwardBinding OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ vrrp(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseControl 7 }
+
+
+ sleNetworkBaseNotification OBJECT IDENTIFIER ::= { sleNetworkBase 3 }
+
+
+ sleNetworkArpProfileChanged NOTIFICATION-TYPE
+ OBJECTS { sleNetworkControlRequest, sleNetworkControlReqResult, sleNetworkControlTimeStamp, sleNetworkArpAgingTime }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetworkBaseNotification 1 }
+
+
+ sleTunnel OBJECT IDENTIFIER ::= { sleNetwork 8 }
+
+
+ sleTunnelIfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleTunnelIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnel 1 }
+
+
+ sleTunnelIfEntry OBJECT-TYPE
+ SYNTAX SleTunnelIfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleTunnelIfIndex }
+ ::= { sleTunnelIfTable 1 }
+
+
+ SleTunnelIfEntry ::=
+ SEQUENCE {
+ sleTunnelIfIndex
+ Integer32,
+ sleTunnelIfLocalAddress
+ IpAddress,
+ sleTunnelIfRemoteAddress
+ IpAddress,
+ sleTunnelIfMode
+ IANAtunnelType,
+ sleTunnelIfTTL
+ Integer32,
+ sleTunnelIfDscpMode
+ INTEGER,
+ sleTunnelIfDscp
+ Integer32,
+ sleTunnelIfKeepaliveInterval
+ Integer32,
+ sleTunnelIfKeepaliveRetry
+ Integer32,
+ sleTunnelIfPathMtuDiscovery
+ INTEGER,
+ sleTunnelIfVRFName
+ OCTET STRING,
+ sleTunnelIfBindingPorts
+ OCTET STRING,
+ sleTunnelIfLocalAddress6
+ InetAddress,
+ sleTunnelIfRemoteAddress6
+ InetAddress,
+ sleTunnelIfChecksum
+ INTEGER,
+ sleTunnelIfDmac
+ MacAddress,
+ sleTunnelIfTos
+ INTEGER
+ }
+
+ sleTunnelIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (10000..11023)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tunnel interface index"
+ ::= { sleTunnelIfEntry 1 }
+
+
+ sleTunnelIfLocalAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown."
+ ::= { sleTunnelIfEntry 2 }
+
+
+ sleTunnelIfRemoteAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown."
+ ::= { sleTunnelIfEntry 3 }
+
+
+ sleTunnelIfMode OBJECT-TYPE
+ SYNTAX IANAtunnelType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The encapsulation method used by the tunnel.
+
+ other(1) - none of the following
+ direct(2) - intermediate header
+ gre(3) - GRE encapsulation
+ minimal(4) - Minimal encapsulation
+ l2tp(5) - L2TP encapsulation
+ pptp(6) - PPTP encapsulation
+ l2f(7) - L2F encapsulation
+ udp(8) - UDP encapsulation
+ atmp(9) - ATMP encapsulation
+ msdp(10) - MSDP encapsulation
+ sixToFour(11) - 6to4 encapsulation
+ sixOverFour(12) - 6over4 encapsulation
+ isatap(13) - ISATAP encapsulation
+ teredo(14) - Teredo encapsulation
+ "
+ ::= { sleTunnelIfEntry 4 }
+
+
+ sleTunnelIfTTL OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The TTL to use in the outer IP header."
+ ::= { sleTunnelIfEntry 5 }
+
+
+ sleTunnelIfDscpMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ dscpAssign(1),
+ dscpCopyFromPacket(2),
+ dscpMapFromPacket(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The DiffServ field mode to use in the outer IP header.
+ A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
+ "
+ ::= { sleTunnelIfEntry 6 }
+
+
+ sleTunnelIfDscp OBJECT-TYPE
+ SYNTAX Integer32 (0..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The static DiffServ field value to use in the outer IP header."
+ ::= { sleTunnelIfEntry 7 }
+
+
+ sleTunnelIfKeepaliveInterval OBJECT-TYPE
+ SYNTAX Integer32 (0..32767)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.)"
+ ::= { sleTunnelIfEntry 8 }
+
+
+ sleTunnelIfKeepaliveRetry OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.)"
+ ::= { sleTunnelIfEntry 9 }
+
+
+ sleTunnelIfPathMtuDiscovery OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Path mtu discovery on tunnel."
+ ::= { sleTunnelIfEntry 10 }
+
+
+ sleTunnelIfVRFName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPN Routing/Forwarding instance name."
+ ::= { sleTunnelIfEntry 11 }
+
+
+ sleTunnelIfBindingPorts OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Tunnel binding ports map."
+ ::= { sleTunnelIfEntry 12 }
+
+
+ sleTunnelIfLocalAddress6 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address of the local endpoint of the tunnel for IPv6"
+ ::= { sleTunnelIfEntry 13 }
+
+
+ sleTunnelIfRemoteAddress6 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address of the remote endpoint of the tunnel for IPv6"
+ ::= { sleTunnelIfEntry 14 }
+
+
+ sleTunnelIfChecksum OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A checksum feature for the tunnel."
+ ::= { sleTunnelIfEntry 15 }
+
+
+ sleTunnelIfDmac OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.)"
+ ::= { sleTunnelIfEntry 16 }
+
+
+ sleTunnelIfTos OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header."
+ ::= { sleTunnelIfEntry 17 }
+
+
+ sleTunnelIfControl OBJECT IDENTIFIER ::= { sleTunnel 2 }
+
+
+ sleTunnelIfControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ createTunnelInterface(1),
+ deleteTunnelInterface(2),
+ setTunnelIfLocalAddress(3),
+ setTunnelIfRemoteAddress(4),
+ setTunnelIfMode(5),
+ setTunnelIfTTL(6),
+ setTunnelIfDscp(7),
+ setTunnelIfKeepalive(8),
+ setTunnelIfPathMtuDiscovery(9),
+ setTunnelIfVRFName(10),
+ unsetTunnelIfVRFName(11),
+ setTunnelLocalAddr6(12),
+ setTunnelRemoteAddr6(13),
+ setTunnelChecksum(14),
+ setTunnelDmac(15),
+ setTunnelTos(16)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ ::= { sleTunnelIfControl 1 }
+
+
+ sleTunnelIfControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleTunnelIfControl 2 }
+
+
+ sleTunnelIfControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ ::= { sleTunnelIfControl 3 }
+
+
+ sleTunnelIfControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleTunnelIfControl 4 }
+
+
+ sleTunnelIfControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleTunnelIfControl 5 }
+
+
+ sleTunnelIfControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (10000..11023)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Tunnel interface index"
+ ::= { sleTunnelIfControl 6 }
+
+
+ sleTunnelIfControlLocalAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown."
+ ::= { sleTunnelIfControl 7 }
+
+
+ sleTunnelIfControlRemoteAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown."
+ ::= { sleTunnelIfControl 8 }
+
+
+ sleTunnelIfControlMode OBJECT-TYPE
+ SYNTAX IANAtunnelType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The encapsulation method used by the tunnel.
+
+ other(1) - none of the following
+ direct(2) - intermediate header
+ gre(3) - GRE encapsulation
+ minimal(4) - Minimal encapsulation
+ l2tp(5) - L2TP encapsulation
+ pptp(6) - PPTP encapsulation
+ l2f(7) - L2F encapsulation
+ udp(8) - UDP encapsulation
+ atmp(9) - ATMP encapsulation
+ msdp(10) - MSDP encapsulation
+ sixToFour(11) - 6to4 encapsulation
+ sixOverFour(12) - 6over4 encapsulation
+ isatap(13) - ISATAP encapsulation
+ teredo(14) - Teredo encapsulation
+ "
+ ::= { sleTunnelIfControl 9 }
+
+
+ sleTunnelIfControlTTL OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The TTL to use in the outer IP header."
+ ::= { sleTunnelIfControl 10 }
+
+
+ sleTunneIflControlDscpMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ dscpAssign(1),
+ dscpCopyFromPacket(2),
+ dscpMapFromPacket(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The DiffServ field mode to use in the outer IP header.
+ A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
+ "
+ DEFVAL { dscpCopyFromPacket }
+ ::= { sleTunnelIfControl 11 }
+
+
+ sleTunneIflControlDscp OBJECT-TYPE
+ SYNTAX Integer32 (0..63)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The static DiffServ field value to use in the outer IP header."
+ ::= { sleTunnelIfControl 12 }
+
+
+ sleTunnelIfControlKeepaliveInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..32767)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.)"
+ DEFVAL { 100 }
+ ::= { sleTunnelIfControl 13 }
+
+
+ sleTunneIflControlKeepaliveRetry OBJECT-TYPE
+ SYNTAX Integer32 (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.)"
+ DEFVAL { 3 }
+ ::= { sleTunnelIfControl 14 }
+
+
+ sleTunnelIfControlPathMtuDiscovery OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ " Path mtu discovery on tunnel."
+ ::= { sleTunnelIfControl 15 }
+
+
+ sleTunnelIfControlVRFName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VPN Routing/Forwarding instance name."
+ ::= { sleTunnelIfControl 16 }
+
+
+ sleTunnelIfControlLocalAddress6 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address of the local endpoint of the tunnel for IPv6"
+ ::= { sleTunnelIfControl 17 }
+
+
+ sleTunnelIfControlRemoteAddress6 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address of the remote endpoint of the tunnel for IPv6"
+ ::= { sleTunnelIfControl 18 }
+
+
+ sleTunnelIfControlChecksum OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A checksum feature for the tunnel."
+ ::= { sleTunnelIfControl 19 }
+
+
+ sleTunnelIfControlDmac OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.)"
+ ::= { sleTunnelIfControl 20 }
+
+
+ sleTunnelIfControlTos OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header."
+ ::= { sleTunnelIfControl 21 }
+
+
+ sleTunnelIfNotification OBJECT IDENTIFIER ::= { sleTunnel 3 }
+
+
+ sleTunnelIfCreated NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 1 }
+
+
+ sleTunnelIfDeleted NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 2 }
+
+
+ sleTunnelIfLocalAddressChanged NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlLocalAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 3 }
+
+
+ sleTunnelIfRemoteAddressChanged NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlRemoteAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 4 }
+
+
+ sleTunnelIfModeChanged NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlMode
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 5 }
+
+
+ sleTunnelIfTTLChanged NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlTTL
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 6 }
+
+
+ sleTunnelIfDscpChanged NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunneIflControlDscpMode,
+ sleTunneIflControlDscp }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 7 }
+
+
+ sleTunnelIfKeepaliveChanged NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlKeepaliveInterval,
+ sleTunneIflControlKeepaliveRetry }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 8 }
+
+
+ sleTunnelIfPathMtuDiscoveryChanged NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlPathMtuDiscovery
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 9 }
+
+
+ sleTunnelIfVRFNameSet NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlVRFName
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 10 }
+
+
+ sleTunnelIfVRFNameUnset NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelIfNotification 11 }
+
+
+ sleTunnelIfLocalAddress6Changed NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlLocalAddress6
+ }
+ STATUS current
+ DESCRIPTION
+ "setTunnelLocalAddr6"
+ ::= { sleTunnelIfNotification 12 }
+
+
+ sleTunnelIfRemoteAddress6Changed NOTIFICATION-TYPE
+ OBJECTS { sleTunnelIfControlRequest, sleTunnelIfControlTimeStamp, sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlRemoteAddress6
+ }
+ STATUS current
+ DESCRIPTION
+ "setTunnelRemoteAddr6"
+ ::= { sleTunnelIfNotification 13 }
+
+
+ sleTunnelAddressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleTunnelAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnel 4 }
+
+
+ sleTunnelAddressEntry OBJECT-TYPE
+ SYNTAX SleTunnelAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleTunnelIfIndex, sleTunnelAddressValue }
+ ::= { sleTunnelAddressTable 1 }
+
+
+ SleTunnelAddressEntry ::=
+ SEQUENCE {
+ sleTunnelAddressValue
+ IpAddress,
+ sleTunnelAddressMask
+ Integer32,
+ sleTunnelIpAddrBcast
+ IpAddress,
+ sleTunnelAddressFlag
+ BITS,
+ sleTunnelAddressScope
+ Integer32,
+ sleTunnelAddressUnnumIfIndex
+ INTEGER,
+ sleTunnelAddressUnnumIpIndex
+ INTEGER
+ }
+
+ sleTunnelAddressValue OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP address to which this entry's addressing information pertains."
+ ::= { sleTunnelAddressEntry 1 }
+
+
+ sleTunnelAddressMask OBJECT-TYPE
+ SYNTAX Integer32 (1..128)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0."
+ ::= { sleTunnelAddressEntry 2 }
+
+
+ sleTunnelIpAddrBcast OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelAddressEntry 3 }
+
+
+ sleTunnelAddressFlag OBJECT-TYPE
+ SYNTAX BITS
+ {
+ permanent(0),
+ tentative(1),
+ deprecated(2),
+ anycast(3),
+ reserved1(4),
+ reserved2(5),
+ reserved3(6),
+ secondary(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "dynamic: ~ permanent
+ primary : ~ secondary
+ anycast: this bit is available for ipv6 only.
+ The others are available for ipv4 only.
+ "
+ ::= { sleTunnelAddressEntry 4 }
+
+
+ sleTunnelAddressScope OBJECT-TYPE
+ SYNTAX Integer32 (0..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "default : global
+ In linux, 200 - site
+ 0 - global
+ 1..252 - scopeNUM
+ 253 - link
+ 254 - host
+ 255 - nowhere
+ "
+ ::= { sleTunnelAddressEntry 5 }
+
+
+ sleTunnelAddressUnnumIfIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.)
+ (ex. br100 -> 100, br200 -> 200)"
+ ::= { sleTunnelAddressEntry 6 }
+
+
+ sleTunnelAddressUnnumIpIndex OBJECT-TYPE
+ SYNTAX INTEGER (0 | 2..1024)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Ip index for Interface Unnumbered feature enhanced.
+ If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface.
+ Interface unnumbered default setting - it get primary ip address.
+ Interface unnumbered enhanced setting - it get secondary ip address with ip-index.
+ (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)"
+ ::= { sleTunnelAddressEntry 7 }
+
+
+ sleTunnelAddressControl OBJECT IDENTIFIER ::= { sleTunnel 5 }
+
+
+ sleTunnelAddressControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ createTunnelIpAddress(1),
+ destroyTunnelIpAddress(2),
+ setIfUnnumbered(3),
+ delIfUnnumbered(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ ::= { sleTunnelAddressControl 1 }
+
+
+ sleTunnelAddressControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleTunnelAddressControl 2 }
+
+
+ sleTunnelAddressControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ ::= { sleTunnelAddressControl 3 }
+
+
+ sleTunnelAddressControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleTunnelAddressControl 4 }
+
+
+ sleTunnelAddressControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleTunnelAddressControl 5 }
+
+
+ sleTunnelAddressControlTunnelIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (10000..11023)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Tunnel interface index"
+ ::= { sleTunnelAddressControl 6 }
+
+
+ sleTunnelAddressControlValue OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IP address to which this entry's addressing information pertains."
+ ::= { sleTunnelAddressControl 7 }
+
+
+ sleTunnelAddressControlMask OBJECT-TYPE
+ SYNTAX Integer32 (1..128)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0."
+ ::= { sleTunnelAddressControl 8 }
+
+
+ sleTunnelAddressControlFlag OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ primary(1),
+ secondary(2),
+ anycast(3),
+ unicast(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "default : primary"
+ DEFVAL { primary }
+ ::= { sleTunnelAddressControl 9 }
+
+
+ sleTunnelAddressControlScope OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ global(0),
+ link(253),
+ host(254)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "default : global
+ not applicable : nowhere"
+ DEFVAL { global }
+ ::= { sleTunnelAddressControl 10 }
+
+
+ sleTunnelAddressControlUnnumIfIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.)
+ (ex. br100 -> 100, br200 -> 200)"
+ ::= { sleTunnelAddressControl 11 }
+
+
+ sleTunnelAddressControlUnnumIpIndex OBJECT-TYPE
+ SYNTAX INTEGER (0 | 2..1024)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The Ip index for Interface Unnumbered feature enhanced.
+ If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface.
+ Interface unnumbered default setting - it get primary ip address.
+ Interface unnumbered enhanced setting - it get secondary ip address with ip-index.
+ (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024)"
+ ::= { sleTunnelAddressControl 12 }
+
+
+ sleTunnelAddressNotification OBJECT IDENTIFIER ::= { sleTunnel 6 }
+
+
+ sleTunnelAddressCreated NOTIFICATION-TYPE
+ OBJECTS { sleTunnelAddressControlRequest, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult, sleTunnelAddressControlTunnelIfIndex, sleTunnelAddressControlValue,
+ sleTunnelAddressControlMask, sleTunnelAddressControlFlag, sleTunnelAddressControlScope }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelAddressNotification 1 }
+
+
+ sleTunnelAddressDeleted NOTIFICATION-TYPE
+ OBJECTS { sleTunnelAddressControlRequest, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult, sleTunnelAddressControlTunnelIfIndex, sleTunnelAddressControlValue,
+ sleTunnelAddressControlMask, sleTunnelAddressControlFlag }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleTunnelAddressNotification 2 }
+
+
+ sleTunnelAddressUnnumChanged NOTIFICATION-TYPE
+ OBJECTS { sleTunnelAddressControlRequest, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult, sleTunnelAddressControlUnnumIfIndex, sleTunnelAddressControlUnnumIpIndex
+ }
+ STATUS current
+ DESCRIPTION
+ "setIfUnnumbered"
+ ::= { sleTunnelAddressNotification 3 }
+
+
+ sleTunnelAddressUnnumDeleted NOTIFICATION-TYPE
+ OBJECTS { sleTunnelAddressControlRequest, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult, sleTunnelAddressControlTunnelIfIndex }
+ STATUS current
+ DESCRIPTION
+ "delIfUnnumbered"
+ ::= { sleTunnelAddressNotification 4 }
+
+
+ sleIpVRF OBJECT IDENTIFIER ::= { sleNetwork 9 }
+
+
+ sleIpVRFTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleIpVRFEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRF 1 }
+
+
+ sleIpVRFEntry OBJECT-TYPE
+ SYNTAX SleIpVRFEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleIpVRFIndex }
+ ::= { sleIpVRFTable 1 }
+
+
+ SleIpVRFEntry ::=
+ SEQUENCE {
+ sleIpVRFIndex
+ Integer32,
+ sleIpVRFName
+ OCTET STRING,
+ sleIpVRFDesignatedPorts
+ OCTET STRING,
+ sleIpVRFRouterId
+ IpAddress,
+ sleIpVRFDescription
+ OCTET STRING
+ }
+
+ sleIpVRFIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VRF index."
+ ::= { sleIpVRFEntry 1 }
+
+
+ sleIpVRFName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VRF name."
+ ::= { sleIpVRFEntry 2 }
+
+
+ sleIpVRFDesignatedPorts OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port map of VRF designated-port."
+ ::= { sleIpVRFEntry 3 }
+
+
+ sleIpVRFRouterId OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Router-Identifier
+ "
+ ::= { sleIpVRFEntry 4 }
+
+
+ sleIpVRFDescription OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The description of VRF.
+ "
+ ::= { sleIpVRFEntry 5 }
+
+
+ sleIpVRFControl OBJECT IDENTIFIER ::= { sleIpVRF 2 }
+
+
+ sleIpVRFControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ createIpVRF(1),
+ deleteIpVRF(2),
+ setIpVRFDesignatedPorts(3),
+ unsetIpVRFDesignatedPorts(4),
+ setVRFRouterId(5),
+ setVRFDescription(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ ::= { sleIpVRFControl 1 }
+
+
+ sleIpVRFControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleIpVRFControl 2 }
+
+
+ sleIpVRFControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ ::= { sleIpVRFControl 3 }
+
+
+ sleIpVRFControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleIpVRFControl 4 }
+
+
+ sleIpVRFControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleIpVRFControl 5 }
+
+
+ sleIpVRFControlName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VRF name"
+ ::= { sleIpVRFControl 6 }
+
+
+ sleIpVRFControlDesignatedPorts OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The port map of VRF designated-port."
+ ::= { sleIpVRFControl 7 }
+
+
+ sleIpVRFControlRouterId OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Router-Identifier
+ "
+ ::= { sleIpVRFControl 8 }
+
+
+ sleIpVRFControlDescription OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The description of VRF."
+ ::= { sleIpVRFControl 9 }
+
+
+ sleIpVRFNotification OBJECT IDENTIFIER ::= { sleIpVRF 3 }
+
+
+ sleIpVRFCreated NOTIFICATION-TYPE
+ OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlName, sleIpVRFControlReqResult }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRFNotification 1 }
+
+
+ sleIpVRFDeleted NOTIFICATION-TYPE
+ OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRFNotification 2 }
+
+
+ sleIpVRFDesignatedPortsSet NOTIFICATION-TYPE
+ OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleIpVRFControlDesignatedPorts
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRFNotification 3 }
+
+
+ sleIpVRFDesignatedPortsUnset NOTIFICATION-TYPE
+ OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleIpVRFControlDesignatedPorts
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRFNotification 4 }
+
+
+ sleIpVRFRouterIdChanged NOTIFICATION-TYPE
+ OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleIpVRFControlRouterId
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRFNotification 5 }
+
+
+ sleIpVRFDescriptionChanged NOTIFICATION-TYPE
+ OBJECTS { sleIpVRFControlRequest, sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleIpVRFControlDescription
+ }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRFNotification 6 }
+
+
+ sleIpVRFSelectionSourceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleIpVRFSelectionSourceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRF 4 }
+
+
+ sleIpVRFSelectionSourceEntry OBJECT-TYPE
+ SYNTAX SleIpVRFSelectionSourceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleIpVRFSelectionSrcIndex }
+ ::= { sleIpVRFSelectionSourceTable 1 }
+
+
+ SleIpVRFSelectionSourceEntry ::=
+ SEQUENCE {
+ sleIpVRFSelectionSrcIndex
+ INTEGER,
+ sleIpVRFSelectionSrcAddr
+ IpAddress,
+ sleIpVRFSelectionSrcMask
+ Integer32,
+ sleIpVRFSelectionSrcVRFName
+ OCTET STRING
+ }
+
+ sleIpVRFSelectionSrcIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..1024)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VRF selection source index."
+ ::= { sleIpVRFSelectionSourceEntry 1 }
+
+
+ sleIpVRFSelectionSrcAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VRF selection by source IP address."
+ ::= { sleIpVRFSelectionSourceEntry 2 }
+
+
+ sleIpVRFSelectionSrcMask OBJECT-TYPE
+ SYNTAX Integer32 (1..32)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0."
+ ::= { sleIpVRFSelectionSourceEntry 3 }
+
+
+ sleIpVRFSelectionSrcVRFName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..63))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "VPN Routing/Forwarding instance name."
+ ::= { sleIpVRFSelectionSourceEntry 4 }
+
+
+ sleIpVRFSelectionSourceControl OBJECT IDENTIFIER ::= { sleIpVRF 5 }
+
+
+ sleIpVRFSelectionSrcControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ setVRFSelectionSource(1),
+ unsetVRFSelectionSource(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command."
+ ::= { sleIpVRFSelectionSourceControl 1 }
+
+
+ sleIpVRFSelectionSrcControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of a user command."
+ ::= { sleIpVRFSelectionSourceControl 2 }
+
+
+ sleIpVRFSelectionSrcControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum wait time for the manager for a long running user command."
+ ::= { sleIpVRFSelectionSourceControl 3 }
+
+
+ sleIpVRFSelectionSrcControlTimeStamp OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleIpVRFSelectionSourceControl 4 }
+
+
+ sleIpVRFSelectionSrcControlReqResult OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command (end of command)."
+ ::= { sleIpVRFSelectionSourceControl 5 }
+
+
+ sleIpVRFSelectionSrcControlAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VRF selection by source IP address."
+ ::= { sleIpVRFSelectionSourceControl 6 }
+
+
+ sleIpVRFSelectionSrcControlMask OBJECT-TYPE
+ SYNTAX Integer32 (1..32)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0."
+ ::= { sleIpVRFSelectionSourceControl 7 }
+
+
+ sleIpVRFSelectionSrcControlVRFName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..63))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "VPN Routing/Forwarding instance name."
+ ::= { sleIpVRFSelectionSourceControl 8 }
+
+
+ sleIpVRFSelectionSourceNotification OBJECT IDENTIFIER ::= { sleIpVRF 6 }
+
+
+ sleIpVRFSelectionSrcSet NOTIFICATION-TYPE
+ OBJECTS { sleIpVRFSelectionSrcControlRequest, sleIpVRFSelectionSrcControlTimeStamp, sleIpVRFSelectionSrcControlReqResult, sleIpVRFSelectionSrcControlAddr, sleIpVRFSelectionSrcControlMask,
+ sleIpVRFSelectionSrcControlVRFName }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRFSelectionSourceNotification 1 }
+
+
+ sleIpVRFSelectionSrcUnset NOTIFICATION-TYPE
+ OBJECTS { sleIpVRFSelectionSrcControlRequest, sleIpVRFSelectionSrcControlTimeStamp, sleIpVRFSelectionSrcControlReqResult, sleIpVRFSelectionSrcControlAddr, sleIpVRFSelectionSrcControlMask,
+ sleIpVRFSelectionSrcControlVRFName }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleIpVRFSelectionSourceNotification 2 }
+
+
+ sleBFD OBJECT IDENTIFIER ::= { sleNetwork 10 }
+
+
+ sleBFDBase OBJECT IDENTIFIER ::= { sleBFD 1 }
+
+
+ sleBFDBaseInfo OBJECT IDENTIFIER ::= { sleBFDBase 1 }
+
+
+ sleBFDEnable OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "BFD fast-detect is enabled or disabled."
+ ::= { sleBFDBaseInfo 1 }
+
+
+ sleBFDEchoEnable OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "BFD Echo function is enabled or disabled."
+ ::= { sleBFDBaseInfo 2 }
+
+
+ sleBFDSlowTimer OBJECT-TYPE
+ SYNTAX INTEGER (1000..30000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "BFD Slow Timer in unit of milliseconds
+ default: 1000(ms)"
+ ::= { sleBFDBaseInfo 3 }
+
+
+ sleBFDBaseControl OBJECT IDENTIFIER ::= { sleBFDBase 2 }
+
+
+ sleBFDControlRequest OBJECT-TYPE
+ SYNTAX INTEGER { setBFDBaseProfile(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command"
+ ::= { sleBFDBaseControl 1 }
+
+
+ sleBFDControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of user command."
+ ::= { sleBFDBaseControl 2 }
+
+
+ sleBFDControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum time for the manager for a long running user command."
+ ::= { sleBFDBaseControl 3 }
+
+
+ sleBFDControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command(end of command)."
+ ::= { sleBFDBaseControl 4 }
+
+
+ sleBFDControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleBFDBaseControl 5 }
+
+
+ sleBFDControlEnable OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "BFD fast-detect is enabled or disabled."
+ ::= { sleBFDBaseControl 6 }
+
+
+ sleBFDControlEchoEnable OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ disable(0),
+ enable(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "BFD Echo function is enabled or disabled."
+ ::= { sleBFDBaseControl 7 }
+
+
+ sleBFDControlSlowTimer OBJECT-TYPE
+ SYNTAX INTEGER (1000..30000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "BFD Slow Timer in unit of milliseconds
+ default: 1000(ms)"
+ ::= { sleBFDBaseControl 8 }
+
+
+ sleBFDBaseNotification OBJECT IDENTIFIER ::= { sleBFDBase 3 }
+
+
+ sleBFDBaseProfileChanged NOTIFICATION-TYPE
+ OBJECTS { sleBFDControlRequest, sleBFDControlReqResult, sleBFDControlTimeStamp, sleBFDEnable, sleBFDEchoEnable,
+ sleBFDSlowTimer }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDBaseNotification 1 }
+
+
+ sleBFDInterface OBJECT IDENTIFIER ::= { sleBFD 2 }
+
+
+ sleBFDInterfaceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleBFDInterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDInterface 1 }
+
+
+ sleBFDInterfaceEntry OBJECT-TYPE
+ SYNTAX SleBFDInterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex }
+ ::= { sleBFDInterfaceTable 1 }
+
+
+ SleBFDInterfaceEntry ::=
+ SEQUENCE {
+ sleBFDIfRxInterval
+ INTEGER,
+ sleBFDIfTxInterval
+ INTEGER,
+ sleBFDIfDetectMulti
+ INTEGER,
+ sleBFDIfRxIntervalIPv6
+ Integer32,
+ sleBFDIfTxIntervalIJPv6
+ Integer32,
+ sleBFDIfDetectMultiIPv6
+ Integer32
+ }
+
+ sleBFDIfRxInterval OBJECT-TYPE
+ SYNTAX INTEGER (50..10000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Required Min Rx Interval of BFD control packet in this interface.
+ default: 50(ms)"
+ ::= { sleBFDInterfaceEntry 1 }
+
+
+ sleBFDIfTxInterval OBJECT-TYPE
+ SYNTAX INTEGER (50..10000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Required Min Tx Interval of BFD control packet in this interface.
+ default: 50(ms)"
+ ::= { sleBFDInterfaceEntry 2 }
+
+
+ sleBFDIfDetectMulti OBJECT-TYPE
+ SYNTAX INTEGER (3..255)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Detect Multi value of BFD control packet in this interface.
+ default: 3"
+ ::= { sleBFDInterfaceEntry 3 }
+
+
+ sleBFDIfRxIntervalIPv6 OBJECT-TYPE
+ SYNTAX Integer32 (50..1000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Required Min Rx Interval of IPv6 BFD control packet in this interface.
+ default: 50(ms)
+ "
+ ::= { sleBFDInterfaceEntry 4 }
+
+
+ sleBFDIfTxIntervalIJPv6 OBJECT-TYPE
+ SYNTAX Integer32 (50..1000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Required Min Tx Interval of IPv6 BFD control packet in this interface.
+ default: 50(ms)
+ "
+ ::= { sleBFDInterfaceEntry 5 }
+
+
+ sleBFDIfDetectMultiIPv6 OBJECT-TYPE
+ SYNTAX Integer32 (3..50)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Detect Multi value of IPv6 BFD control packet in this interface.
+ default: 3
+ "
+ ::= { sleBFDInterfaceEntry 6 }
+
+
+ sleBFDInterfaceControl OBJECT IDENTIFIER ::= { sleBFDInterface 2 }
+
+
+ sleBFDIfControlRequest OBJECT-TYPE
+ SYNTAX INTEGER { setBFDIfProfile(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The request of a user command"
+ ::= { sleBFDInterfaceControl 1 }
+
+
+ sleBFDIfControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of user command."
+ ::= { sleBFDInterfaceControl 2 }
+
+
+ sleBFDIfControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum time for the manager for a long running user command."
+ ::= { sleBFDInterfaceControl 3 }
+
+
+ sleBFDIfControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time stamp of the last command(end of command)."
+ ::= { sleBFDInterfaceControl 4 }
+
+
+ sleBFDIfControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of the last user command."
+ ::= { sleBFDInterfaceControl 5 }
+
+
+ sleBFDIfControlNetIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..4097)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "BFD Interface Index."
+ ::= { sleBFDInterfaceControl 6 }
+
+
+ sleBFDIfControlRxInterval OBJECT-TYPE
+ SYNTAX INTEGER (50..10000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Required Min Rx Interval of BFD control packet in this interface.
+ default: 50(ms)"
+ ::= { sleBFDInterfaceControl 7 }
+
+
+ sleBFDIfControlTxInterval OBJECT-TYPE
+ SYNTAX INTEGER (50..10000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Required Min Tx Interval of BFD control packet in this interface.
+ default: 50(ms)"
+ ::= { sleBFDInterfaceControl 8 }
+
+
+ sleBFDIfControlDetectMulti OBJECT-TYPE
+ SYNTAX INTEGER (3..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Detect Multi value of BFD control packet in this interface.
+ default: 3"
+ ::= { sleBFDInterfaceControl 9 }
+
+
+ sleBFDIfControlRxIntervalIPv6 OBJECT-TYPE
+ SYNTAX Integer32 (50..1000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Required Min Rx Interval of IPv6 BFD control packet in this interface.
+ default: 50(ms)
+ "
+ ::= { sleBFDInterfaceControl 10 }
+
+
+ sleBFDIfControlTxIntervalIPv6 OBJECT-TYPE
+ SYNTAX Integer32 (50..1000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Required Min Tx Interval of IPv6 BFD control packet in this interface.
+ default: 50(ms)
+ "
+ ::= { sleBFDInterfaceControl 11 }
+
+
+ sleBFDIfControlDetectMultiIPv6 OBJECT-TYPE
+ SYNTAX Integer32 (3..50)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Detect Multi value of IPv6 BFD control packet in this interface.
+ default: 3
+ "
+ ::= { sleBFDInterfaceControl 12 }
+
+
+ sleBFDInterfaceNotification OBJECT IDENTIFIER ::= { sleBFDInterface 3 }
+
+
+ sleBFDIfProfileChanged NOTIFICATION-TYPE
+ OBJECTS { sleBFDIfControlRequest, sleBFDIfControlTimeStamp, sleBFDIfControlRxIntervalIPv6, sleBFDIfControlTxIntervalIPv6, sleBFDIfControlDetectMultiIPv6,
+ sleBFDIfControlReqResult, sleBFDIfRxInterval, sleBFDIfTxInterval, sleBFDIfDetectMulti }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDInterfaceNotification 1 }
+
+
+ sleBFDSession OBJECT IDENTIFIER ::= { sleBFD 3 }
+
+
+ sleBFDSessionInfo OBJECT IDENTIFIER ::= { sleBFDSession 1 }
+
+
+ sleBFDSessionInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleBFDSessionInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDSessionInfo 1 }
+
+
+ sleBFDSessionInfoEntry OBJECT-TYPE
+ SYNTAX SleBFDSessionInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue }
+ ::= { sleBFDSessionInfoTable 1 }
+
+
+ SleBFDSessionInfoEntry ::=
+ SEQUENCE {
+ sleBFDSessionNeighAddrType
+ InetAddressType,
+ sleBFDSessionNeighAddrValue
+ InetAddress,
+ sleBFDSessionRegProtocols
+ BITS,
+ sleBFDSessionLocalDiscr
+ Unsigned32,
+ sleBFDSessionRemoteDiscr
+ Unsigned32,
+ sleBFDSessionDetecMultiplier
+ INTEGER,
+ sleBFDSessionStatus
+ INTEGER,
+ sleBFDSessionEchoUsage
+ INTEGER,
+ sleBFDSessionUptime
+ TimeTicks
+ }
+
+ sleBFDSessionNeighAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of Neighbor Address referred to this session"
+ ::= { sleBFDSessionInfoEntry 1 }
+
+
+ sleBFDSessionNeighAddrValue OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of Neighbor Address referred to this session."
+ ::= { sleBFDSessionInfoEntry 2 }
+
+
+ sleBFDSessionRegProtocols OBJECT-TYPE
+ SYNTAX BITS
+ {
+ ospfv2(0),
+ ospfv3(1),
+ vrrp4(2),
+ vrrp6(3),
+ staticroute4(4),
+ staticroute6(5),
+ bgp(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of Neighbor Address referred to this session."
+ ::= { sleBFDSessionInfoEntry 3 }
+
+
+ sleBFDSessionLocalDiscr OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Discriminator of this session."
+ ::= { sleBFDSessionInfoEntry 4 }
+
+
+ sleBFDSessionRemoteDiscr OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Discriminator of remote session neighboring this session."
+ ::= { sleBFDSessionInfoEntry 5 }
+
+
+ sleBFDSessionDetecMultiplier OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Detect Multiplier value which this session used.
+ default: 3"
+ ::= { sleBFDSessionInfoEntry 6 }
+
+
+ sleBFDSessionStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ adminDown(0),
+ down(1),
+ init(2),
+ up(3),
+ disabled(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status of this session.
+ AdminDown(0) is same as disabled(4)."
+ ::= { sleBFDSessionInfoEntry 7 }
+
+
+ sleBFDSessionEchoUsage OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ notUsing(0),
+ using(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Determine whether this session use or not echo function."
+ ::= { sleBFDSessionInfoEntry 8 }
+
+
+ sleBFDSessionUptime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time since this session¡¯s status changed into ¡®Up¡¯."
+ ::= { sleBFDSessionInfoEntry 9 }
+
+
+ sleBFDSessionStats OBJECT IDENTIFIER ::= { sleBFDSession 2 }
+
+
+ sleBFDSessionStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleBFDSessionStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDSessionStats 1 }
+
+
+ sleBFDSessionStatsEntry OBJECT-TYPE
+ SYNTAX SleBFDSessionStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue }
+ ::= { sleBFDSessionStatsTable 1 }
+
+
+ SleBFDSessionStatsEntry ::=
+ SEQUENCE {
+ sleBFDSessionStatsHolddownTime
+ Unsigned32,
+ sleBFDSessionStatsHolddownExpires
+ Unsigned32,
+ sleBFDSessionStatsHolddownHitCount
+ Unsigned32,
+ sleBFDSessionStatsHelloTime
+ Unsigned32,
+ sleBFDSessionStatsHelloHitCount
+ Unsigned32,
+ sleBFDSessionStatsRxCount
+ Unsigned32,
+ sleBFDSessionStatsRxAvgInterval
+ Unsigned32,
+ sleBFDSessionStatsRxMinInterval
+ Unsigned32,
+ sleBFDSessionStatsRxMaxInterval
+ Unsigned32,
+ sleBFDSessionStatsTxCount
+ Unsigned32,
+ sleBFDSessionStatsTxAvgInterval
+ Unsigned32,
+ sleBFDSessionStatsTxMinInterval
+ Unsigned32,
+ sleBFDSessionStatsTxMaxInterval
+ Unsigned32,
+ sleBFDSessionStatsEchoRxCount
+ Unsigned32,
+ sleBFDSessionStatsEchoRxAvgInterval
+ Unsigned32,
+ sleBFDSessionStatsEchoRxMinInterval
+ Unsigned32,
+ sleBFDSessionStatsEchoRxMaxInterval
+ Unsigned32,
+ sleBFDSessionStatsEchoTxCount
+ Unsigned32,
+ sleBFDSessionStatsEchoTxAvgInterval
+ Unsigned32,
+ sleBFDSessionStatsEchoTxMinInterva
+ Unsigned32,
+ sleBFDSessionStatsEchoTxMaxInterval
+ Unsigned32
+ }
+
+ sleBFDSessionStatsHolddownTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Type of Neighbor Address referred to this session."
+ ::= { sleBFDSessionStatsEntry 1 }
+
+
+ sleBFDSessionStatsHolddownExpires OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time remaining before this entry change into down status without receiving hello in unit of milliseconds."
+ ::= { sleBFDSessionStatsEntry 2 }
+
+
+ sleBFDSessionStatsHolddownHitCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hit Count whose this session status chang into down."
+ ::= { sleBFDSessionStatsEntry 3 }
+
+
+ sleBFDSessionStatsHelloTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time is when it expects next hello, after receiving that in unit of milliseconds."
+ ::= { sleBFDSessionStatsEntry 4 }
+
+
+ sleBFDSessionStatsHelloHitCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hit Count whose this session received."
+ ::= { sleBFDSessionStatsEntry 5 }
+
+
+ sleBFDSessionStatsRxCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hit Count whose this session received control packet."
+ ::= { sleBFDSessionStatsEntry 6 }
+
+
+ sleBFDSessionStatsRxAvgInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average interval whose this session received control packet."
+ ::= { sleBFDSessionStatsEntry 7 }
+
+
+ sleBFDSessionStatsRxMinInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum interval whose this session received control packet."
+ ::= { sleBFDSessionStatsEntry 8 }
+
+
+ sleBFDSessionStatsRxMaxInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum interval whose this session received control packet."
+ ::= { sleBFDSessionStatsEntry 9 }
+
+
+ sleBFDSessionStatsTxCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hit Count whose this session send control packet."
+ ::= { sleBFDSessionStatsEntry 10 }
+
+
+ sleBFDSessionStatsTxAvgInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average interval whose this session sent control packet."
+ ::= { sleBFDSessionStatsEntry 11 }
+
+
+ sleBFDSessionStatsTxMinInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum interval whose this session sent control packet."
+ ::= { sleBFDSessionStatsEntry 12 }
+
+
+ sleBFDSessionStatsTxMaxInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum interval whose this session received control packet."
+ ::= { sleBFDSessionStatsEntry 13 }
+
+
+ sleBFDSessionStatsEchoRxCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hit Count whose this session received echo packet"
+ ::= { sleBFDSessionStatsEntry 14 }
+
+
+ sleBFDSessionStatsEchoRxAvgInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average interval whose this session received echo packet"
+ ::= { sleBFDSessionStatsEntry 15 }
+
+
+ sleBFDSessionStatsEchoRxMinInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum interval whose this session received echo packet"
+ ::= { sleBFDSessionStatsEntry 16 }
+
+
+ sleBFDSessionStatsEchoRxMaxInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum interval whose this session received echo packet"
+ ::= { sleBFDSessionStatsEntry 17 }
+
+
+ sleBFDSessionStatsEchoTxCount OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Hit Count whose this session send echo packet
+ "
+ ::= { sleBFDSessionStatsEntry 18 }
+
+
+ sleBFDSessionStatsEchoTxAvgInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Average interval whose this session sent echo packet."
+ ::= { sleBFDSessionStatsEntry 19 }
+
+
+ sleBFDSessionStatsEchoTxMinInterva OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Minimum interval whose this session sent echo packet."
+ ::= { sleBFDSessionStatsEntry 20 }
+
+
+ sleBFDSessionStatsEchoTxMaxInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Maximum interval whose this session received echo packet."
+ ::= { sleBFDSessionStatsEntry 21 }
+
+
+ sleBFDSessionLocal OBJECT IDENTIFIER ::= { sleBFDSession 3 }
+
+
+ sleBFDSessionLocalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleBFDSessionLocalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDSessionLocal 1 }
+
+
+ sleBFDSessionLocalEntry OBJECT-TYPE
+ SYNTAX SleBFDSessionLocalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue }
+ ::= { sleBFDSessionLocalTable 1 }
+
+
+ SleBFDSessionLocalEntry ::=
+ SEQUENCE {
+ sleBFDSessionLocalDiag
+ INTEGER,
+ sleBFDSessionLocalState
+ INTEGER,
+ sleBFDSessionLocalFlags
+ BITS,
+ sleBFDSessionLocalMultiplier
+ INTEGER,
+ sleBFDSessionLocalMinTxInterval
+ Unsigned32,
+ sleBFDSessionLocalMinRxInterval
+ Unsigned32,
+ sleBFDSessionLocalMinEchoInterval
+ Unsigned32
+ }
+
+ sleBFDSessionLocalDiag OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ noDiag(0),
+ detectExpired(1),
+ echoFailed(2),
+ neighDownAlarm(3),
+ fwdPlaneReset(4),
+ pathDown(5),
+ concatPathDown(6),
+ adminDown(7),
+ reverseConcatDown(8),
+ reserved(9)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of State field of this session¡¯s control packet."
+ ::= { sleBFDSessionLocalEntry 1 }
+
+
+ sleBFDSessionLocalState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ adminDown(0),
+ donw(1),
+ init(2),
+ up(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of Diag field of this session¡¯s control packet"
+ ::= { sleBFDSessionLocalEntry 2 }
+
+
+ sleBFDSessionLocalFlags OBJECT-TYPE
+ SYNTAX BITS
+ {
+ poll(0),
+ final(1),
+ controlIndependent(2),
+ authPresent(3),
+ demand(4),
+ multipoint(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of Flags field of this session¡¯s control packet."
+ ::= { sleBFDSessionLocalEntry 3 }
+
+
+ sleBFDSessionLocalMultiplier OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of MinTxInterval field of this session¡¯s control packet in unit of microseconds."
+ ::= { sleBFDSessionLocalEntry 4 }
+
+
+ sleBFDSessionLocalMinTxInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of MinTxInterval field of this session¡¯s control packet in unit of microseconds."
+ ::= { sleBFDSessionLocalEntry 5 }
+
+
+ sleBFDSessionLocalMinRxInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of MinRxInterval field of this session¡¯s control packet in unit of microseconds."
+ ::= { sleBFDSessionLocalEntry 6 }
+
+
+ sleBFDSessionLocalMinEchoInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of MinEchoInterval field of this session¡¯s control packet in unit of microseconds."
+ ::= { sleBFDSessionLocalEntry 7 }
+
+
+ sleBFDSessionRemote OBJECT IDENTIFIER ::= { sleBFDSession 4 }
+
+
+ sleBFDSessionRemoteTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleBFDSessionRemoteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDSessionRemote 1 }
+
+
+ sleBFDSessionRemoteEntry OBJECT-TYPE
+ SYNTAX SleBFDSessionRemoteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue }
+ ::= { sleBFDSessionRemoteTable 1 }
+
+
+ SleBFDSessionRemoteEntry ::=
+ SEQUENCE {
+ sleBFDSessionRemoteDiag
+ INTEGER,
+ sleBFDSessionRemoteState
+ INTEGER,
+ sleBFDSessionremoteFlags
+ BITS,
+ sleBFDSessionRemoteMultiplier
+ INTEGER,
+ sleBFDSessionRemoteMinTxInterval
+ Unsigned32,
+ sleBFDSessionRemoteMinRxInterval
+ Unsigned32,
+ sleBFDSessionRemoteMinEchoInterval
+ Unsigned32
+ }
+
+ sleBFDSessionRemoteDiag OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ noDiag(0),
+ detectExpired(1),
+ echoFailed(2),
+ neighDownAlarm(3),
+ fwdPlaneReset(4),
+ pathDown(5),
+ concatPathDown(6),
+ adminDown(7),
+ reverseConcatDown(8),
+ reserved(9)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of State field of remote session¡¯s control packet."
+ ::= { sleBFDSessionRemoteEntry 1 }
+
+
+ sleBFDSessionRemoteState OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ adminDown(0),
+ donw(1),
+ init(2),
+ up(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of Diag field of remote session¡¯s control packet"
+ ::= { sleBFDSessionRemoteEntry 2 }
+
+
+ sleBFDSessionremoteFlags OBJECT-TYPE
+ SYNTAX BITS
+ {
+ poll(0),
+ final(1),
+ controlIndependent(2),
+ authPresent(3),
+ demand(4),
+ multipoint(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of Flags field of remote session¡¯s control packet."
+ ::= { sleBFDSessionRemoteEntry 3 }
+
+
+ sleBFDSessionRemoteMultiplier OBJECT-TYPE
+ SYNTAX INTEGER (1..63)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of MinTxInterval field of this session¡¯s control packet in unit of microseconds."
+ ::= { sleBFDSessionRemoteEntry 4 }
+
+
+ sleBFDSessionRemoteMinTxInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of MinTxInterval field of remote session¡¯s control packet in unit of microseconds."
+ ::= { sleBFDSessionRemoteEntry 5 }
+
+
+ sleBFDSessionRemoteMinRxInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of MinRxInterval field of remote session¡¯s control packet in unit of microseconds."
+ ::= { sleBFDSessionRemoteEntry 6 }
+
+
+ sleBFDSessionRemoteMinEchoInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Value of MinEchoInterval field of remote session¡¯s control packet in unit of microseconds."
+ ::= { sleBFDSessionRemoteEntry 7 }
+
+
+ sleBFDStaticGw OBJECT IDENTIFIER ::= { sleBFD 4 }
+
+
+ sleBFDStaticGwTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleBFDStaticGwEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGw 1 }
+
+
+ sleBFDStaticGwEntry OBJECT-TYPE
+ SYNTAX SleBFDStaticGwEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Description."
+ INDEX { sleNetIfIndex, sleBFDStaticGwAddrType, sleBFDStaticGwAddr }
+ ::= { sleBFDStaticGwTable 1 }
+
+
+ SleBFDStaticGwEntry ::=
+ SEQUENCE {
+ sleBFDStaticGwAddrType
+ InetAddressType,
+ sleBFDStaticGwAddr
+ InetAddress
+ }
+
+ sleBFDStaticGwAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The BFD static Gateway address type. Only ipv4(1)."
+ ::= { sleBFDStaticGwEntry 1 }
+
+
+ sleBFDStaticGwAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The BFD static Gateway address. 4bytes"
+ ::= { sleBFDStaticGwEntry 2 }
+
+
+ sleBFDStaticGwControl OBJECT IDENTIFIER ::= { sleBFDStaticGw 2 }
+
+
+ sleBFDStaticGwControlRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ addBfdStaticGw(1),
+ delBfdStaticGw(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwControl 1 }
+
+
+ sleBFDStaticGwControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwControl 2 }
+
+
+ sleBFDStaticGwControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwControl 3 }
+
+
+ sleBFDStaticGwControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwControl 4 }
+
+
+ sleBFDStaticGwControlReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwControl 5 }
+
+
+ sleBFDStaticGwControlNetIfIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwControl 6 }
+
+
+ sleBFDStaticGwControlGwAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwControl 7 }
+
+
+ sleBFDStaticGwControlGwAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwControl 8 }
+
+
+ sleBFDStaticGwNotification OBJECT IDENTIFIER ::= { sleBFDStaticGw 3 }
+
+
+ sleBFDStaticGwAdded NOTIFICATION-TYPE
+ OBJECTS { sleBFDStaticGwControlRequest, sleBFDStaticGwControlTimer, sleBFDStaticGwControlReqResult, sleBFDStaticGwControlNetIfIndex, sleBFDStaticGwControlGwAddr,
+ sleBFDStaticGwControlGwAddrType }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwNotification 1 }
+
+
+ sleBFDStaticGwDeleted NOTIFICATION-TYPE
+ OBJECTS { sleBFDStaticGwControlRequest, sleBFDStaticGwControlTimeStamp, sleBFDStaticGwControlReqResult, sleBFDStaticGwControlNetIfIndex, sleBFDStaticGwControlGwAddr,
+ sleBFDStaticGwControlGwAddrType }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleBFDStaticGwNotification 2 }
+
+
+ sleNetworkGroup OBJECT-GROUP
+ OBJECTS { sleNetIfIndex, sleNetIfName, sleNetIfDescription, sleNetIfTableIndex, sleNetIfAdminState,
+ sleNetIfOperState, sleNetIfMulticast, sleNetIfControlRequest, sleNetIfControlStatus, sleNetIfControlTimer,
+ sleNetIfControlTimeStamp, sleNetIfControlReqResult, sleNetIfControlIndex, sleNetIfControlDescription, sleNetIfControlAdminState,
+ sleNetIfControlMulticast, sleIpAddrValue, sleIpAddrMask, sleIpAddrBcast, sleIpAddrControlRequest,
+ sleIpAddrControlStatus, sleIpAddrControlTimer, sleIpAddrControlTimeStamp, sleIpAddrControlReqResult, sleIpAddrControlNetIfIndex,
+ sleIpAddrControlValue, sleIpAddrControlMask, sleArpIpAddress, sleArpPhyAddress, sleArpPortIndex,
+ sleArpHwType, sleArpControlRequest, sleArpControlStatus, sleArpControlTimer, sleArpControlTimeStamp,
+ sleArpControlReqResult, sleArpControlIpAddress, sleArpControlPhyAddress, sleRouteDstAddress, sleRouteDstMask,
+ sleRouteGateway, sleRouteInterface, sleRouteType, sleRouteProto, sleRouteMetric,
+ sleRouteActive, sleRouteBindingSrcAddr, sleRouteDistance, sleRouteControlRequest, sleRouteControlStatus,
+ sleRouteControlTimer, sleRouteControlTimeStamp, sleRouteControlReqResult, sleRouteControlDstAddress, sleRouteControlDstMask,
+ sleRouteControlGateway, sleRouteControlInterface, sleRouteControlBindingSrcAddr, sleRouteControlDistance, sleDhcpClIpAddr,
+ sleDhcpClState, sleDhcpClControlRequest, sleDhcpClControlStatus, sleDhcpClControlTimer, sleDhcpClControlTimeStamp,
+ sleDhcpClControlReqResult, sleDhcpClControlUpdateIP, sleNetIfRegState, sleNetIfMtu, sleNetIfIpSetMode,
+ sleNetIfIpMartianFilter, sleNetIfControlRegState, sleNetIfControlMtu, sleNetIfControlIpMartianFilter, sleIpAddrFlag,
+ sleIpAddrScope, sleIpAddrControlFlag, sleIpAddrControlScope, sleArpState, sleArpHwUsed,
+ sleArpUsedTime, sleArpControlNetIfIndex, sleArpControlState, sleArpControlMask, sleRouteSubtype,
+ sleRouteNexthopStatus, sleRouteRibStatus, sleNetworkArpAgingTime, sleNetworkControlRequest, sleNetworkControlStatus,
+ sleNetworkControlTimer, sleNetworkControlReqResult, sleNetworkControlTimeStamp, sleNetworkControlArpAgingTime, sleNetIfUpCnt,
+ sleNetIfDownCnt, sleNetIfLinkUpTime, sleNetIfElapsedTimeAfterClearStats, sleNetIfBindingVRFName, sleNetIfControlBindingVRFName,
+ sleRouteVRFIndex, sleRouteControlVRFIndex, sleTunnelIfIndex, sleTunnelIfLocalAddress, sleTunnelIfRemoteAddress,
+ sleTunnelIfMode, sleTunnelIfTTL, sleTunnelIfDscpMode, sleTunnelIfDscp, sleTunnelIfKeepaliveInterval,
+ sleTunnelIfKeepaliveRetry, sleTunnelIfControlRequest, sleTunnelIfControlStatus, sleTunnelIfControlTimer, sleTunnelIfControlTimeStamp,
+ sleTunnelIfControlReqResult, sleTunnelIfControlIndex, sleTunnelIfControlLocalAddress, sleTunnelIfControlRemoteAddress, sleTunnelIfControlMode,
+ sleTunnelIfControlTTL, sleTunneIflControlDscpMode, sleTunneIflControlDscp, sleTunnelIfControlKeepaliveInterval, sleTunneIflControlKeepaliveRetry,
+ sleTunnelAddressValue, sleTunnelAddressMask, sleTunnelIpAddrBcast, sleTunnelAddressFlag, sleTunnelAddressScope,
+ sleTunnelAddressControlRequest, sleTunnelAddressControlStatus, sleTunnelAddressControlTimer, sleTunnelAddressControlTimeStamp, sleTunnelAddressControlReqResult,
+ sleTunnelAddressControlTunnelIfIndex, sleTunnelAddressControlValue, sleTunnelAddressControlMask, sleTunnelAddressControlFlag, sleTunnelAddressControlScope,
+ sleIpVRFIndex, sleIpVRFName, sleIpVRFControlRequest, sleIpVRFControlStatus, sleIpVRFControlTimer,
+ sleIpVRFControlTimeStamp, sleIpVRFControlReqResult, sleIpVRFControlName, sleNetIfOnFailUseVRF, sleNetIfControlOnFailUseVRF,
+ sleTunnelIfPathMtuDiscovery, sleTunnelIfVRFName, sleTunnelIfBindingPorts, sleTunnelIfControlPathMtuDiscovery, sleTunnelIfControlVRFName,
+ sleIpVRFDesignatedPorts, sleIpVRFControlDesignatedPorts, sleIpVRFSelectionSrcIndex, sleIpVRFSelectionSrcAddr, sleIpVRFSelectionSrcMask,
+ sleIpVRFSelectionSrcVRFName, sleIpVRFSelectionSrcControlRequest, sleIpVRFSelectionSrcControlStatus, sleIpVRFSelectionSrcControlTimer, sleIpVRFSelectionSrcControlTimeStamp,
+ sleIpVRFSelectionSrcControlReqResult, sleIpVRFSelectionSrcControlAddr, sleIpVRFSelectionSrcControlMask, sleIpVRFSelectionSrcControlVRFName, sleNetIfIpUnreachability,
+ sleNetIfControlIpUnreachability, sleIpVRFRouterId, sleIpVRFDescription, sleIpVRFControlRouterId, sleIpVRFControlDescription,
+ sleBFDEnable, sleBFDEchoEnable, sleBFDSlowTimer, sleBFDControlRequest, sleBFDControlStatus,
+ sleBFDControlTimer, sleBFDControlTimeStamp, sleBFDControlReqResult, sleBFDControlEnable, sleBFDControlEchoEnable,
+ sleBFDControlSlowTimer, sleBFDIfRxInterval, sleBFDIfTxInterval, sleBFDIfDetectMulti, sleBFDIfControlRequest,
+ sleBFDIfControlStatus, sleBFDIfControlTimer, sleBFDIfControlTimeStamp, sleBFDIfControlReqResult, sleBFDIfControlNetIfIndex,
+ sleBFDIfControlRxInterval, sleBFDIfControlTxInterval, sleBFDIfControlDetectMulti, sleBFDSessionNeighAddrType, sleBFDSessionNeighAddrValue,
+ sleBFDSessionRegProtocols, sleBFDSessionLocalDiscr, sleBFDSessionRemoteDiscr, sleBFDSessionDetecMultiplier, sleBFDSessionStatus,
+ sleBFDSessionEchoUsage, sleBFDSessionUptime, sleBFDSessionStatsHolddownTime, sleBFDSessionStatsHolddownExpires, sleBFDSessionStatsHolddownHitCount,
+ sleBFDSessionStatsHelloTime, sleBFDSessionStatsHelloHitCount, sleBFDSessionStatsRxCount, sleBFDSessionStatsRxAvgInterval, sleBFDSessionStatsRxMinInterval,
+ sleBFDSessionStatsRxMaxInterval, sleBFDSessionStatsTxCount, sleBFDSessionStatsTxAvgInterval, sleBFDSessionStatsTxMinInterval, sleBFDSessionStatsTxMaxInterval,
+ sleBFDSessionLocalDiag, sleBFDSessionLocalState, sleBFDSessionLocalFlags, sleBFDSessionLocalMultiplier, sleBFDSessionLocalMinTxInterval,
+ sleBFDSessionLocalMinRxInterval, sleBFDSessionLocalMinEchoInterval, sleBFDSessionRemoteDiag, sleBFDSessionRemoteState, sleBFDSessionremoteFlags,
+ sleBFDSessionRemoteMultiplier, sleBFDSessionRemoteMinTxInterval, sleBFDSessionRemoteMinRxInterval, sleBFDSessionRemoteMinEchoInterval, sleBFDStaticGwAddrType,
+ sleBFDStaticGwAddr, sleBFDStaticGwControlRequest, sleBFDStaticGwControlStatus, sleBFDStaticGwControlTimer, sleBFDStaticGwControlTimeStamp,
+ sleBFDStaticGwControlReqResult, sleBFDStaticGwControlNetIfIndex, sleBFDStaticGwControlGwAddrType, sleBFDStaticGwControlGwAddr, sleBFDSessionStatsEchoRxCount,
+ sleBFDSessionStatsEchoRxAvgInterval, sleBFDSessionStatsEchoRxMinInterval, sleBFDSessionStatsEchoRxMaxInterval, sleBFDSessionStatsEchoTxCount, sleBFDSessionStatsEchoTxAvgInterval,
+ sleBFDSessionStatsEchoTxMinInterva, sleBFDSessionStatsEchoTxMaxInterval, sleNetIfipRedirects, sleNetIfControlIpRedirects, sleIpAddrIpIndex,
+ sleIpAddrUnnumUsedIp, sleIpAddrControlIpIndex, sleTunnelAddressUnnumIpIndex, sleTunnelAddressControlUnnumIpIndex, sleNetIfIpForwarding,
+ sleNetIfControlIpForwarding, sleTunnelIfLocalAddress6, sleTunnelIfRemoteAddress6, sleTunnelIfControlLocalAddress6, sleTunnelIfControlRemoteAddress6,
+ sleNetIfAlias, sleNetIfIpArpAlias, sleNetIfIpArpAliasMac, sleNetIfArpMCProbeCount, sleNetIfArpUCProbeCount,
+ sleNetIfArpRetransTime, sleNetIfIpProxyArp, sleNetIfIpRPFilter, sleNetIfRPFilter, sleNetIfRouteMap,
+ sleNetIfControlAlias, sleNetIfControlIpArpAlias, sleNetIfControlIpArpAliasMac, sleNetIfControlArpMCProbeCount, sleNetIfControlArpUCProbeCount,
+ sleNetIfControlArpRetransTime, sleNetIfControlIpProxyArp, sleNetIfControlIpRPFilter, sleNetIfControlRPFilter, sleNetIfControlRouteMap,
+ sleBFDIfRxIntervalIPv6, sleBFDIfTxIntervalIJPv6, sleBFDIfDetectMultiIPv6, sleBFDIfControlRxIntervalIPv6, sleBFDIfControlTxIntervalIPv6,
+ sleBFDIfControlDetectMultiIPv6, sleTunnelIfControlTos, sleTunnelIfControlDmac, sleTunnelIfControlChecksum, sleTunnelIfTos,
+ sleTunnelIfDmac, sleTunnelIfChecksum, sleNetworkBaseVrfDynamicForwardBinding, sleNetworkControlVrfDynamicForwardBinding, sleDhcpClControlNetIfIndex,
+ sleDhcpClMode, sleDhcpClNetmask, sleDhcpClGateway, sleDhcpClDnsServer, sleDhcpClServer,
+ sleDhcpClClientId, sleDhcpClClientIdStyle, sleDhcpClClassId, sleDhcpClClassIdStyle, sleDhcpClLeasetime,
+ sleDhcpClControlMode, sleDhcpClControlClientId, sleDhcpClControlClientIdStyle, sleDhcpClControlClassId, sleDhcpClControlClassIdStyle,
+ sleDhcpClControlLeasetime, sleTunnelAddressUnnumIfIndex, sleTunnelAddressControlUnnumIfIndex }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetwork 14 }
+
+
+ sleNetworkNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { sleNetIfProfileChanged, sleIpAddressCreated, sleIpAddressDestroyed, sleArpEntryCreated, sleArpEntryDestroyed,
+ sleArpTableCleared, sleRouteStaticCreated, sleRouteStaticDestroyed, sleRouteStaticProfileChanged, sleDhcpClModeChanged,
+ sleDhcpClProfileChanged, sleTunnelIfCreated, sleTunnelIfDeleted, sleTunnelIfLocalAddressChanged, sleTunnelIfRemoteAddressChanged,
+ sleTunnelIfModeChanged, sleTunnelIfTTLChanged, sleTunnelIfDscpChanged, sleTunnelIfKeepaliveChanged, sleTunnelAddressCreated,
+ sleTunnelAddressDeleted, sleIpVRFCreated, sleIpVRFDeleted, sleDhcpClStateChanged, sleNetIfRegStateChanged,
+ sleNetIfIpMartianFilterChanged, sleArpTableClearedByAddr, sleNetworkArpProfileChanged, sleNetIfBindingVRFSet, sleNetIfBindingVRFUnset,
+ sleNetIfIpOnFailUseVRFChanged, sleTunnelIfPathMtuDiscoveryChanged, sleIpVRFDesignatedPortsSet, sleIpVRFDesignatedPortsUnset, sleIpVRFSelectionSrcSet,
+ sleNetIfIpUnreachabilityChanged, sleIpVRFRouterIdChanged, sleIpVRFDescriptionChanged, sleBFDBaseProfileChanged, sleBFDIfProfileChanged,
+ sleBFDStaticGwAdded, sleBFDStaticGwDeleted, sleNetIfIpRedirectsChanged, sleIpAddressIpIndexAdded, sleIpAddressIpIndexDeleted,
+ sleTunnelAddressUnnumChanged, sleTunnelAddressUnnumDeleted, sleNetIfIpForwardingChanged, sleTunnelIfLocalAddress6Changed, sleTunnelIfRemoteAddress6Changed,
+ sleNetIfAliasChanged, sleNetIfIpArpAliasChanged, sleNetIfArpMCProbeCountChanged, sleNetIfArpUCProbeCountChanged, sleNetIfArpRetransTimeChanged,
+ sleNetIfIpProxyArpChanged, sleNetIfIpRPFilterChanged, sleNetIfRPFilterChanged, sleNetIfRouteMapChanged, sleIpVRFSelectionSrcUnset,
+ sleTunnelIfVRFNameSet, sleTunnelIfVRFNameUnset }
+ STATUS current
+ DESCRIPTION
+ "Description."
+ ::= { sleNetwork 15 }
+
+
+
+ END
+
+--
+-- sle-network-mib.mib
+--
|