Initial commitHEADmain

1 files changed, 492 insertions, 0 deletions

diff --git a/MIBS/enterasys/CTINB-MIB b/MIBS/enterasys/CTINB-MIB
new file mode 100644
index 0000000..a1d7263
--- /dev/null
+++ b/MIBS/enterasys/CTINB-MIB
@@ -0,0 +1,492 @@
+CTINB-MIB  DEFINITIONS ::= BEGIN
+ 
+        --  ctinb-info-mib
+        --  Revision:   01.00.00
+        --  Date: October 14, 1996
+ 
+        --  Cabletron Systems, Inc.
+        --  35 Industrial Way, P.O. Box 5005
+        --  Rochester, NH 03867-0505
+        --  (603) 332-9400
+        --  support@ctron.com
+ 
+        --
+        --  This module will be extended, as needed.
+        --
+ 
+        --  Cabletron Systems reserves the right to make changes in
+        --  specification and other information contained in this document
+        --  without prior notice.  The reader should consult Cabletron Systems
+        --  to determine whether any such changes have been made.
+        --
+        --  In no event shall Cabletron Systems be liable for any incidental,
+        --  indirect, special, or consequential damages whatsoever (including
+        --  but not limited to lost profits) arising out of or related to this
+        --  document or the information contained in it, even if Cabletron
+        --  Systems has been advised of, known, or should have known, the
+        --  possibility of such damages.
+        --
+        --  Cabletron grants vendors, end-users, and other interested parties
+        --  a non-exclusive license to use this Specification in connection
+        --  with the management of Cabletron products.
+ 
+        --  Copyright August 96 Cabletron Systems
+
+        IMPORTS 
+                Counter, TimeTicks
+                        FROM RFC1155-SMI
+                OBJECT-TYPE
+                        FROM RFC-1212
+                ctINBinfo 
+                        FROM CTRON-MIB-NAMES ;
+
+
+--
+-- The inbMonarchsystem table represents the Monarch(INB mgr) information
+-- on a per INB basis
+--
+--
+        inbMonarchSystem      OBJECT IDENTIFIER ::= { ctINBinfo 1 }
+
+        inbMonarchSystemTable  OBJECT-TYPE 
+            SYNTAX  SEQUENCE OF InbMonarchSystemEntry
+            ACCESS  not-accessible
+            STATUS  mandatory
+            ::= { inbMonarchSystem 1 }
+
+        inbMonarchSystemEntry  OBJECT-TYPE 
+            SYNTAX  InbMonarchSystemEntry
+            ACCESS  not-accessible
+            STATUS  mandatory
+            INDEX   { inbMonarchINB }
+            ::= { inbMonarchSystemTable 1 }
+
+        InbMonarchSystemEntry ::=
+            SEQUENCE { 
+                inbMonarchSystemINB
+                    INTEGER,
+                inbMonarchStatusTimeStamp
+                    TimeTicks,
+                inbMonarchBandwidth
+                    INTEGER,
+                inbMonarchTDMSlotMode
+                    INTEGER,
+                inbMonarchTDMSlotTotal
+                    INTEGER,
+                inbMonarchSystemTDMSlotActual
+                    INTEGER,
+                inbMonarchTDMSlotbandwidth
+                    INTEGER
+          }
+
+        inbMonarchSystemINB  OBJECT-TYPE
+            SYNTAX  INTEGER{
+               inbA(1),
+               inbB(2)
+             }
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION 
+                    "Two physical INB's may exist on a module. This
+                    object distinquishes which INB, INB-A or INB-B."
+            ::= { inbMonarchSystemEntry 1 }
+
+         inbMonarchStatusTimeStamp OBJECT-TYPE
+            SYNTAX  TimeTicks
+            ACCESS  read-only
+         STATUS  mandatory
+         DESCRIPTION
+                    "This object represents the value of sysUptime when
+                     the Monarch last changed."
+            ::= { inbMonarchSystemEntry 2 }
+ 
+         inbMonarchBandwidth OBJECT-TYPE
+            SYNTAX  INTEGER
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION
+                    "The bandwidth of this INB in Megabits."
+            ::= { inbMonarchSystemEntry 3 }
+
+         inbMonarchTDMSlotMode OBJECT-TYPE
+            SYNTAX  INTEGER {
+                  automatic(1),
+                  userPolicy(2)
+               }
+            ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+                    "The automatic TDM mode overides any preset TDM
+                     allocation. All boards get an equal number of 
+                     pre-allocated TDM slots, adding up to 100% of total
+                     INB bandwidth, and have Round Robin enabled. The
+                     automatic mode will, in effect, provide each board
+                     with a 1/(number of boards) minimum guarantee
+                     INB bandwidth.
+ 
+                     The userPolicy mode will have the per board policy
+                     enforced. Each board will have a level of service
+                     (TDM slots, Round Robin arbitration from the 
+                     inbMonarchTable) associated with it to take effect
+                     when this object is set to user_policy. Newly
+                     inserted boards will default to Round Robin and
+                     share the remaining fixed INB bandwidth
+                     (inbMonarchTDMSlotTotal - inbMonarchTDMSlotActual)."
+            ::= { inbMonarchSystemEntry 4 }
+
+        inbMonarchTDMSlotTotal OBJECT-TYPE
+            SYNTAX  INTEGER
+            ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                    "This object represents the total possible number of INB
+                     backplane TDM slots."
+            ::= { inbMonarchSystemEntry 5 }
+
+        inbMonarchSystemTDMSlotActual OBJECT-TYPE
+            SYNTAX  INTEGER
+            ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                    "This object represents the total number of allocated INB
+                     backplane TDM slots. This is the sum of all instances of
+                     inbMonarchTDMSlotRequest in userPolicy mode. In automatic
+                     mode this number would represent the number of inserted
+                     boards."
+            ::= { inbMonarchSystemEntry 6 }
+
+        inbMonarchTDMSlotbandwidth OBJECT-TYPE
+            SYNTAX  INTEGER
+            ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+                    "This object represents the bandwidth in bits that
+                     each slot represents on the backplane."
+
+            ::= { inbMonarchSystemEntry 7 }
+--
+-- The inbMonarchTable table represents the Monarch(INB mgr) configuration information
+-- on a per board/slot basis
+--
+--
+        inbMonarch            OBJECT IDENTIFIER ::= { ctINBinfo 2 }
+
+        inbMonarchTable  OBJECT-TYPE 
+            SYNTAX  SEQUENCE OF InbMonarchEntry
+            ACCESS  not-accessible
+            STATUS  mandatory
+            ::= { inbMonarch 1 }
+
+        inbMonarchEntry  OBJECT-TYPE 
+            SYNTAX  InbMonarchEntry
+            ACCESS  not-accessible
+            STATUS  mandatory
+            INDEX   { inbMonarchSlot,
+                      inbMonarchINB }
+            ::= { inbMonarchTable 1 }
+
+        InbMonarchEntry ::=
+            SEQUENCE { 
+                inbMonarchSlot
+                    INTEGER,
+                inbMonarchINB
+                    INTEGER,
+                inbMonarchStatus
+                    INTEGER,
+                inbMonarchLinkStatus
+                    INTEGER,
+                inbMonarchLinkCapacity
+                    INTEGER,
+                inbMonarchTDMSlotRequest
+                    INTEGER,
+                inbMonarchTDMSlotActual
+                    INTEGER,
+                inbMonarchRoundRobinControl
+                    INTEGER
+            }
+
+        inbMonarchSlot  OBJECT-TYPE 
+            SYNTAX  INTEGER
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "The slot number containing this module."
+            ::= { inbMonarchEntry 1 }
+
+        inbMonarchINB  OBJECT-TYPE 
+            SYNTAX  INTEGER{
+               inbA(1),
+               inbB(2)
+             }
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "Two physical INB interfaces may exist on a module. This
+                    object distinquishes which INB, INB-A or INB-B."
+            ::= { inbMonarchEntry 2 }
+
+        inbMonarchStatus  OBJECT-TYPE 
+            SYNTAX  INTEGER {
+               standBy(1),
+               sysUndefined(2),
+               operational(3)
+             }
+            ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION  
+                    "Application state of the monarch application on this
+                    module. Standby - indicates this module is not the
+                    monarch but can be. SysUndefined - indicates this
+                    module can not be monarch. Operational - says this
+                    module is the monarch. "
+            ::= { inbMonarchEntry 3 }
+
+        inbMonarchLinkStatus OBJECT-TYPE
+            SYNTAX  INTEGER {
+               linkUp(1),
+               linkDown(2)
+             }
+            ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION 
+                    "This object describes the state of the backplane. LinkUp
+                     is when this INB detects the clock on the backplane.
+                     LinkDown is when no backplane clock has been detected."
+            ::= { inbMonarchEntry 4 }
+
+        inbMonarchLinkCapacity OBJECT-TYPE
+            SYNTAX  INTEGER
+            ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION 
+                    "The bandwidth capacity of this board in Megabytes."
+            ::= { inbMonarchEntry 5 }
+
+ 
+        inbMonarchTDMSlotRequest OBJECT-TYPE
+            SYNTAX  INTEGER
+            ACCESS  read-write
+            STATUS  mandatory
+            DESCRIPTION
+                    "This object is the number of fixed TDM slots requested
+                     for this board . NOTE: new request will take effect the
+                     next time the inbMonarchTDMSlotMode object is set to
+                     userPolicy. NOTE: this value has no meaning when the
+                     inbMonarchTDMSlotMode is automatic."
+            ::= { inbMonarchEntry 6 }
+
+        inbMonarchTDMSlotActual OBJECT-TYPE
+            SYNTAX  INTEGER
+            ACCESS  read-write
+            STATUS  mandatory
+            DESCRIPTION
+                    "This object is the actual number of fixed TDM slots
+                     given to this board. In automatic mode, this value is the
+                     total number of slots divided by the number of inserted
+                     boards, in userPolicy mode, this reflects the
+                     inbMonarchTDMSlotRequest value at the last time the
+                     chassis entered userPolicy mode."
+            ::= { inbMonarchEntry 7 }
+
+        inbMonarchRoundRobinControl  OBJECT-TYPE 
+            SYNTAX  INTEGER {
+                        enabled(1),
+                        disabled(2)
+                    }
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "This object enables or disable this INB the ability to
+                     participate in the Round Robin arbitration phase."
+            ::= { inbMonarchEntry 8 }
+
+
+--
+--
+-- inbstats are the basic per board INB statistics
+--
+--
+--
+--
+--
+
+
+
+        inbStats              OBJECT IDENTIFIER ::= { ctINBinfo 3 }
+
+        inbStatsTable  OBJECT-TYPE 
+            SYNTAX  SEQUENCE OF InbStatsEntry
+            ACCESS  not-accessible
+            STATUS  mandatory
+            ::= { inbStats 1 }
+
+        inbStatsEntry  OBJECT-TYPE 
+            SYNTAX  InbStatsEntry
+            ACCESS  not-accessible
+            STATUS  mandatory
+            INDEX   { inbStatsSlot,
+                      inbStatsINB }
+            ::= { inbStatsTable 1 }
+
+        InbStatsEntry ::=
+            SEQUENCE { 
+                inbStatsSlot
+                    INTEGER,
+                inbStatsINB
+                    INTEGER,
+                inbStatsIfindex
+                    INTEGER,
+                inbStatsUniCastCells
+                    Counter,
+                inbStatsMultiCastCells
+                    Counter,
+                inbStatsBroadCastCells
+                    Counter,
+                inbStatsXmitCells
+                    Counter,
+                inbStatsRecvSeqErrs
+                    Counter,
+                inbStatsRecvChksumErrs
+                    Counter,
+                inbStatsxmitToFps
+                    Counter,
+                inbStatsToFpsDrops
+                    Counter,
+                inbStatsFromInbErrs
+                    Counter,
+                inbStatsToINBDrops
+                    Counter,
+                inbStatsToInbErrs
+                    Counter
+            }
+
+        inbStatsSlot  OBJECT-TYPE 
+            SYNTAX  INTEGER
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "The slot number containing this module."
+            ::= { inbStatsEntry 1 }
+
+        inbStatsINB  OBJECT-TYPE 
+            SYNTAX  INTEGER {
+                 inbA(1),
+                 inbB(2)
+             }
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "Two physical INB interfaces may exist on a module. This
+                    object distinquishes which INB, INB-A or INB-B."
+            ::= { inbStatsEntry 2 }
+
+        inbStatsIfindex OBJECT-TYPE
+            SYNTAX  INTEGER
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION
+                    "The interface number of the INB. The interface 
+                     identified by a particular value of this
+                     object is the same interface as identified by the
+                     same value of the ifIndex object defined in RFC 1213."
+            ::= { inbStatsEntry 3 }
+
+        inbStatsUniCastCells  OBJECT-TYPE 
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "Number of UniCast INB cells received from the backplane."
+            ::= { inbStatsEntry 4 }
+
+        inbStatsMultiCastCells  OBJECT-TYPE 
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "Number of multi-cast INB cells received from the backplane."
+            ::= { inbStatsEntry 5 }
+
+        inbStatsBroadCastCells  OBJECT-TYPE 
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "Number of broadcast INB cells received from the backplane."
+            ::= { inbStatsEntry 6 }
+
+        inbStatsXmitCells  OBJECT-TYPE 
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "Number of INB cells transmitted to the backplane."
+            ::= { inbStatsEntry 7 }
+
+
+        inbStatsRecvSeqErrs  OBJECT-TYPE
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION
+                    "Number of pkts with sequence errors received from
+                     the backplane."
+            ::= { inbStatsEntry 8 }
+
+        inbStatsRecvChksumErrs  OBJECT-TYPE
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION
+                    "Number of pkts with checksum errors received from
+                     the backplane."
+            ::= { inbStatsEntry 9 }
+
+        inbStatsxmitToFps  OBJECT-TYPE
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION
+                    "Number of transmit errors to FPS."
+            ::= { inbStatsEntry 10 }
+
+        inbStatsToFpsDrops  OBJECT-TYPE
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION
+                    "INBC receive fifo full count. This represents the
+                     number of cells that were not forwarded to the FPS."
+            ::= { inbStatsEntry 11 }
+
+        inbStatsFromInbErrs  OBJECT-TYPE 
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "Number of INB receive errors from the backplane. This
+                     includes FPSC xmit errors(inbStatsxmitToFps), INBC
+                     receive sequence errors (inbStatsRecvSeqErrs)
+                     and INBC checksum errors(inbStatsRecvChksumErrs)." 
+            ::= { inbStatsEntry 12 }
+
+        inbStatsToINBDrops  OBJECT-TYPE
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION
+                    "Number of FPSC recv frame drop count. This represents
+                     the number of frames that were not sent out on the INB
+                     backplane."
+            ::= { inbStatsEntry 13 }
+
+        inbStatsToInbErrs  OBJECT-TYPE 
+            SYNTAX  Counter
+            ACCESS  read-only
+            STATUS  mandatory
+            DESCRIPTION  
+                    "Number of INB backplane transmit errors. This includes
+                     FPSC receive timeout errors"
+            ::= { inbStatsEntry 14 }
+
+END