diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/fs/GARP-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/fs/GARP-MIB')
| -rw-r--r-- | MIBS/fs/GARP-MIB | 2886 |
1 files changed, 2886 insertions, 0 deletions
diff --git a/MIBS/fs/GARP-MIB b/MIBS/fs/GARP-MIB new file mode 100644 index 0000000..5a27190 --- /dev/null +++ b/MIBS/fs/GARP-MIB @@ -0,0 +1,2886 @@ +GARP-MIB DEFINITIONS ::= BEGIN
+
+-- -------------------------------------------------------------
+-- Internal GARP MIB
+-- -------------------------------------------------------------
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE,
+ Counter32, Unsigned32, TimeTicks
+ FROM SNMPv2-SMI
+ TimeInterval, RowStatus, TruthValue, DisplayString,
+ TEXTUAL-CONVENTION, MacAddress
+ FROM SNMPv2-TC
+ gbnL2
+ FROM ADMIN-MASTER-MIB
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF;
+
+garpMib MODULE-IDENTITY
+ LAST-UPDATED "9907060000Z"
+ ORGANIZATION "admin Systems, Inc."
+ CONTACT-INFO
+ "admin Systems"
+ DESCRIPTION
+ "GARP Module Management"
+
+-- revision history
+
+ REVISION "9907060000Z"
+ DESCRIPTION
+ "Initial version"
+
+ ::= { gbnL2 2 }
+
+garpMIBObjects OBJECT IDENTIFIER ::= { garpMib 1 }
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+
+EnabledStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A simple status value for the object."
+ SYNTAX INTEGER {
+ enabled(1), disabled(2) }
+
+TimeFilter ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "To be used for the index to a table. Allows an application
+ to download only those rows changed since a particular time.
+ A row is considered changed if the value of any object in the
+ row changes or if the row is created or deleted.
+
+ When sysUpTime is equal to zero, this table shall be empty.
+
+ One entry exists for each past value of sysUpTime, except that
+ the whole table is purged should sysUpTime wrap.
+
+ As this basic row is updated new conceptual rows are created
+ (which still share the now updated object values with all
+ other instances). The number of instances which are created
+ is determined by the value of sysUpTime at which the basic row
+ was last updated. One instance will exist for each value of
+ sysUpTime at the last update time for the row. A new
+ timeMark instance is created for each new sysUpTime value.
+ Each new conceptual row will be associated with the timeMark
+ instance which was created at the value of sysUpTime with
+ which the conceptual row is to be associated.
+
+ By definition all conceptual rows were updated at or after
+ time zero and so at least one conceptual row (associated with
+ timeMark.0) must exist for each underlying (basic) row.
+
+ See the appendix for further discussion of this variable.
+
+ Consider the following fooTable:
+
+ fooTable ...
+ INDEX { fooTimeMark, fooIndex }
+
+ FooEntry {
+ fooTimeMark TimeFilter
+ fooIndex INTEGER,
+ fooCounts Counter
+ }
+
+ Should there be two basic rows in this table (fooIndex == 1,
+ fooIndex == 2) and row 1 was updated most recently at time 6,
+ while row 2 was updated most recently at time 8, and both rows
+ had been updated on several earlier occasions such that the
+ current values were 5 and 9 respectively then the following
+ fooCounts instances would exist.
+
+ fooCounts.0.1 5
+ fooCounts.0.2 9
+ fooCounts.1.1 5
+ fooCounts.1.2 9
+ fooCounts.2.1 5
+ fooCounts.2.2 9
+ fooCounts.3.1 5
+ fooCounts.3.2 9
+ fooCounts.4.1 5
+ fooCounts.4.2 9
+ fooCounts.5.1 5
+ fooCounts.5.2 9
+ fooCounts.6.1 5
+ fooCounts.6.2 9
+ fooCounts.7.2 9 -- note that row 1 doesn't exist for
+ fooCounts.8.2 9 -- times 7 and 8"
+ SYNTAX TimeTicks
+
+PortList ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Each octet within this value specifies a set of eight
+ ports, with the first octet specifying ports 1 through
+ 8, the second octet specifying ports 9 through 16, etc.
+ Within each octet, the most significant bit represents
+ the lowest numbered port, and the least significant bit
+ represents the highest numbered port. Thus, each port
+ of the bridge is represented by a single bit within the
+ value of this object. If that bit has a value of '1'
+ then that port is included in the set of ports; the port
+ is not included if its bit has a value of '0'."
+ SYNTAX OCTET STRING
+
+VlanIndex ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value used to index per-VLAN tables: values of 0 and
+ 4095 are not permitted; if the value is between 1 and
+ 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
+ global scope within a given bridged domain (see VlanId
+ textual convention). If the value is greater than 4095
+ then it represents a VLAN with scope local to the
+ particular agent, i.e. one without a global VLAN-ID
+ assigned to it. Such VLANs are outside the scope of
+ IEEE 802.1Q but it is convenient to be able to manage them
+ in the same way using this MIB."
+ SYNTAX Unsigned32
+
+VlanId ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A 12-bit VLAN ID used in the VLAN Tag header."
+ SYNTAX INTEGER (1..4094)
+
+-- -------------------------------------------------------------
+-- groups in the GARP MIB
+-- -------------------------------------------------------------
+
+gDot1qBase OBJECT IDENTIFIER ::= { garpMIBObjects 1 }
+gDot1qTp OBJECT IDENTIFIER ::= { garpMIBObjects 2 }
+gDot1qStatic OBJECT IDENTIFIER ::= { garpMIBObjects 3 }
+gDot1qVlan OBJECT IDENTIFIER ::= { garpMIBObjects 4 }
+gDot1dGarp OBJECT IDENTIFIER ::= { garpMIBObjects 5 }
+gDot1dGmrp OBJECT IDENTIFIER ::= { garpMIBObjects 6 }
+gDot1dExtBase OBJECT IDENTIFIER ::= { garpMIBObjects 7 }
+gDot1qExtend OBJECT IDENTIFIER ::= { garpMIBObjects 8 }
+
+-- -------------------------------------------------------------
+
+-- -------------------------------------------------------------
+-- gDot1qBase group
+-- -------------------------------------------------------------
+
+gDot1qVlanVersionNumber OBJECT-TYPE
+ SYNTAX INTEGER {
+ version1(1)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The version number of IEEE 802.1Q that this device
+ supports."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.1.1"
+ DEFVAL { 1 }
+ ::= { gDot1qBase 1 }
+
+gDot1qMaxVlanId OBJECT-TYPE
+ SYNTAX VlanId
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum IEEE 802.1Q VLAN ID that this device
+ supports."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 9.3.2.3"
+ ::= { gDot1qBase 2 }
+
+gDot1qMaxSupportedVlans OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of IEEE 802.1Q VLANs that this
+ device supports."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.1.1"
+ ::= { gDot1qBase 3 }
+
+gDot1qNumVlans OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current number of IEEE 802.1Q VLANs that are
+ configured in this device."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.1.1"
+ ::= { gDot1qBase 4 }
+
+gDot1qGvrpStatus OBJECT-TYPE
+ SYNTAX EnabledStatus{ enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { enabled }
+ The administrative status requested by management for
+ GVRP. The value enabled(1) indicates that GVRP should
+ be enabled on this device, on all ports for which it has
+ not been specifically disabled. When disabled(2), GVRP
+ is disabled on all ports and all GVRP packets will be
+ forwarded transparently. This object affects all GVRP
+ Applicant and Registrar state machines. A transition
+ from disabled(2) to enabled(1) will cause a reset of all
+ GVRP state machines on all ports."
+ DEFVAL { disabled }
+ ::= { gDot1qBase 5 }
+
+gDot1qVlanIndexMappingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanIndexMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table gives the mapping of linear indices to
+ VLAN Indices. It is necessary because CCDGEN doesn't
+ support nonlinear indices."
+ REFERENCE
+ "No reference"
+ ::= { gDot1qBase 6 }
+
+gDot1qVlanIndexMappingEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanIndexMappingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry maps a linear index to a VLAN index."
+ INDEX { gDot1qVlanSlotIndex }
+ ::= { gDot1qVlanIndexMappingTable 1 }
+
+GarpDot1qVlanIndexMappingEntry ::=
+ SEQUENCE {
+ gDot1qVlanSlotIndex
+ INTEGER,
+ gDot1qVlanSlotActualIndex
+ VlanIndex
+ }
+
+gDot1qVlanSlotIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..64)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The durable slot index for this VLAN"
+ ::= { gDot1qVlanIndexMappingEntry 1 }
+
+gDot1qVlanSlotActualIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The actual VLAN index for this durable VLAN slot"
+ ::= { gDot1qVlanIndexMappingEntry 2 }
+
+-- -------------------------------------------------------------
+-- the gDot1qTp group
+-- -------------------------------------------------------------
+
+-- -------------------------------------------------------------
+-- the current Filtering Database Table
+-- -------------------------------------------------------------
+
+gDot1qFdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qFdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains configuration and control
+ information for each Filtering Database currently
+ operating on this device. Entries in this table appear
+ automatically when VLANs are assigned FDB IDs in the
+ gDot1qVlanCurrentTable."
+ ::= { gDot1qTp 1 }
+
+gDot1qFdbEntry OBJECT-TYPE
+ SYNTAX GarpDot1qFdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a specific Filtering Database."
+ INDEX { gDot1qFdbId }
+ ::= { gDot1qFdbTable 1 }
+
+GarpDot1qFdbEntry ::=
+ SEQUENCE {
+ gDot1qFdbId
+ Unsigned32,
+ gDot1qFdbDynamicCount
+ Counter32
+ }
+
+gDot1qFdbId OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The identity of this Filtering Database."
+ ::= { gDot1qFdbEntry 1 }
+
+gDot1qFdbDynamicCount OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current number of dynamic entries in this
+ Filtering Database."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.1.1.3"
+ ::= { gDot1qFdbEntry 2 }
+
+-- -------------------------------------------------------------
+-- Multiple Forwarding Databases for 802.1Q Transparent devices
+-- This table is an alternative to the dot1dTpFdbTable,
+-- previously defined for 802.1D devices which only support a
+-- single Forwarding Database.
+-- -------------------------------------------------------------
+
+gDot1qTpFdbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qTpFdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table that contains information about unicast entries
+ for which the device has forwarding and/or filtering
+ information. This information is used by the
+ transparent bridging function in determining how to
+ propagate a received frame."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.7"
+ ::= { gDot1qTp 2 }
+
+gDot1qTpFdbEntry OBJECT-TYPE
+ SYNTAX GarpDot1qTpFdbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a specific unicast MAC address for
+ which the device has some forwarding and/or filtering
+ information."
+ INDEX { gDot1qFdbId, gDot1qTpFdbAddress }
+ ::= { gDot1qTpFdbTable 1 }
+
+GarpDot1qTpFdbEntry ::=
+ SEQUENCE {
+ gDot1qTpFdbAddress
+ MacAddress,
+ gDot1qTpFdbPort
+ INTEGER,
+ gDot1qTpFdbStatus
+ INTEGER
+ }
+
+gDot1qTpFdbAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A unicast MAC address for which the device has
+ forwarding and/or filtering information."
+ ::= { gDot1qTpFdbEntry 1 }
+
+gDot1qTpFdbPort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Either the value '0', or the port number of the port on
+ which a frame having a source address equal to the value
+ of the corresponding instance of gDot1qTpFdbAddress has
+ been seen. A value of '0' indicates that the port
+ number has not been learned but that the device does
+ have some forwarding/filtering information about this
+ address (e.g. in the gDot1qStaticUnicastTable).
+ Implementors are encouraged to assign the port value to
+ this object whenever it is learned even for addresses
+ for which the corresponding value of gDot1qTpFdbStatus is
+ not learned(3)."
+ ::= { gDot1qTpFdbEntry 2 }
+
+gDot1qTpFdbStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ invalid(2),
+ learned(3),
+ self(4),
+ mgmt(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The status of this entry. The meanings of the values
+ are:
+ other(1) - none of the following. This may include
+ the case where some other MIB object (not the
+ corresponding instance of gDot1qTpFdbPort, nor an
+ entry in the gDot1qStaticUnicastTable) is being
+ used to determine if and how frames addressed to
+ the value of the corresponding instance of
+ gDot1qTpFdbAddress are being forwarded.
+ invalid(2) - this entry is no longer valid (e.g., it
+ was learned but has since aged out), but has not
+ yet been flushed from the table.
+ learned(3) - the value of the corresponding instance
+ of gDot1qTpFdbPort was learned and is being used.
+ self(4) - the value of the corresponding instance of
+ gDot1qTpFdbAddress represents one of the device's
+ addresses. The corresponding instance of
+ gDot1qTpFdbPort indicates which of the device's
+ ports has this address.
+ mgmt(5) - the value of the corresponding instance of
+ gDot1qTpFdbAddress is also the value of an
+ existing instance of gDot1qStaticAddress."
+ ::= { gDot1qTpFdbEntry 3 }
+-- -------------------------------------------------------------
+-- Dynamic Group Registration Table
+-- -------------------------------------------------------------
+
+gDot1qTpGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qTpGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing filtering information for VLANs
+ configured into the bridge by (local or network)
+ management, or learnt dynamically, specifying the set of
+ ports to which frames received on a VLAN for this FDB
+ and containing a specific Group destination address are
+ allowed to be forwarded."
+ ::= { gDot1qTp 3 }
+
+gDot1qTpGroupEntry OBJECT-TYPE
+ SYNTAX GarpDot1qTpGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Filtering information configured into the bridge by
+ management, or learnt dynamically, specifying the set of
+ ports to which frames received on a VLAN and containing
+ a specific Group destination address, are allowed to be
+ forwarded. The subset of these ports learnt dynamically
+ is also provided."
+ INDEX { gDot1qVlanIndex, gDot1qTpGroupAddress }
+ ::= { gDot1qTpGroupTable 1 }
+
+GarpDot1qTpGroupEntry ::=
+ SEQUENCE {
+ gDot1qTpGroupAddress
+ MacAddress,
+ gDot1qTpGroupEgressPorts
+ PortList,
+ gDot1qTpGroupLearnt
+ PortList
+ }
+
+gDot1qTpGroupAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The destination Group MAC address in a frame to which
+ this entry's filtering information applies."
+ ::= { gDot1qTpGroupEntry 1 }
+
+gDot1qTpGroupEgressPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The complete set of ports, in this VLAN, to which
+ frames destined for this Group MAC address are currently
+ being explicitly forwarded. This does not include ports
+ for which this address is only implicitly forwarded, in
+ the gDot1qForwardAllPorts list."
+ ::= { gDot1qTpGroupEntry 2 }
+
+gDot1qTpGroupLearnt OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The subset of ports in gDot1qTpGroupEgressPorts which
+ were learnt by GMRP or some other dynamic mechanism, in
+ this Filtering database."
+ ::= { gDot1qTpGroupEntry 3 }
+
+-- -------------------------------------------------------------
+-- Service Requirements Group
+-- -------------------------------------------------------------
+
+gDot1qForwardAllTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qForwardAllEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing forwarding information for each
+ VLAN, specifying the set of ports to which forwarding of
+ all multicasts applies, configured statically by
+ management or dynamically by GMRP. An entry appears in
+ this table for all VLANs that are currently
+ instantiated."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
+ ::= { gDot1qTp 4 }
+gDot1qForwardAllEntry OBJECT-TYPE
+ SYNTAX GarpDot1qForwardAllEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Forwarding information for a VLAN, specifying the set
+ of ports to which all multicasts should be forwarded,
+ configured statically by management or dynamically by
+ GMRP."
+--
+-- This table is actually indexed by VLAN ID, however for the purposes
+-- of default value table generation, we introduce a phony index of
+-- the dimension of the VLAN slot table.
+--
+-- INDEX { gDot1qVlanIndex }
+--
+ INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime
+ ::= { gDot1qForwardAllTable 1 }
+
+GarpDot1qForwardAllEntry ::=
+ SEQUENCE {
+ gDot1qForwardAllPorts
+ PortList,
+ gDot1qForwardAllVlanIndex
+ VlanIndex,
+ gDot1qForwardAllStaticPorts
+ PortList,
+ gDot1qForwardAllForbiddenPorts
+ PortList
+ }
+
+gDot1qForwardAllPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The complete set of ports in this VLAN to which all
+ multicast group-addressed frames are to be forwarded.
+ This includes ports for which this need has been
+ determined dynamically by GMRP, or configured statically
+ by management."
+ ::= { gDot1qForwardAllEntry 1 }
+
+gDot1qForwardAllVlanIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ This is here only to allow the VLAN index to be saved along
+ with the corresponding forward all table entry."
+ ::= { gDot1qForwardAllEntry 2 }
+
+gDot1qForwardAllStaticPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports configured by management in this VLAN
+ to which all multicast group-addressed frames are to be
+ forwarded. Ports entered in this list will also appear
+ in the complete set shown by gDot1qForwardAllPorts. This
+ value will be restored after the device is reset. This
+ only applies to ports that are members of the VLAN,
+ defined by gDot1qVlanCurrentEgressPorts. A port may not
+ be added in this set if it is already a member of the
+ set of ports in gDot1qForwardAllForbiddenPorts. The
+ default value is a string of ones of appropriate length,
+ to indicate standard non-EFS behaviour, i.e. forward
+ all multicasts to all ports."
+ ::= { gDot1qForwardAllEntry 3 }
+
+gDot1qForwardAllForbiddenPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports configured by management in this VLAN
+ for which the Service Requirement attribute Forward All
+ Multicast Groups may not be dynamically registered by
+ GMRP. This value will be restored after the device is
+ reset. A port may not be added in this set if it is
+ already a member of the set of ports in
+ gDot1qForwardAllStaticPorts. The default value is a
+ string of zeros of appropriate length."
+ ::= { gDot1qForwardAllEntry 4 }
+
+gDot1qForwardUnregisteredTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qForwardUnregisteredEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing forwarding information for each
+ VLAN, specifying the set of ports to which forwarding of
+ multicast group-addressed frames for which there is no
+ more specific forwarding information applies. This is
+ configured statically by management and determined
+ dynamically by GMRP. An entry appears in this table for
+ all VLANs that are currently instantiated."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"
+ ::= { gDot1qTp 5 }
+
+gDot1qForwardUnregisteredEntry OBJECT-TYPE
+ SYNTAX GarpDot1qForwardUnregisteredEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Forwarding information for a VLAN, specifying the set
+ of ports to which all multicasts for which there is no
+ more specific forwarding information shall be forwarded.
+ This is configured statically by management or
+ dynamically by GMRP."
+--
+-- This table is actually indexed by VLAN ID, however for the purposes
+-- of default value table generation, we introduce a phony index of
+-- the dimension of the VLAN slot table.
+--
+-- INDEX { gDot1qVlanIndex }
+--
+ INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime
+ ::= { gDot1qForwardUnregisteredTable 1 }
+
+GarpDot1qForwardUnregisteredEntry ::=
+ SEQUENCE {
+ gDot1qForwardUnregisteredPorts
+ PortList,
+ gDot1qForwardUnregisteredVlanIndex
+ VlanIndex,
+ gDot1qForwardUnregisteredStaticPorts
+ PortList,
+ gDot1qForwardUnregisteredForbiddenPorts
+ PortList
+ }
+
+gDot1qForwardUnregisteredPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The complete set of ports in this VLAN to which
+ multicast group-addressed frames for which there is no
+ more specific forwarding information will be forwarded.
+ This includes ports for which this need has been
+ determined dynamically by GMRP, or configured statically
+ by management."
+ ::= { gDot1qForwardUnregisteredEntry 1 }
+
+gDot1qForwardUnregisteredVlanIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ This is here only to allow the VLAN index to be saved along
+ with the corresponding forward unregistered table entry."
+ ::= { gDot1qForwardUnregisteredEntry 2 }
+
+gDot1qForwardUnregisteredStaticPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports configured by management, in this
+ VLAN, to which multicast group-addressed frames for
+ which there is no more specific forwarding information
+ are to be forwarded. Ports entered in this list will
+ also appear in the complete set shown by
+ gDot1qForwardUnregisteredPorts. This value will be
+ restored after the device is reset. A port may not be
+ added in this set if it is already a member of the set
+ of ports in gDot1qForwardUnregisteredForbiddenPorts. The
+ default value is a string of zeros of appropriate
+ length, although this has no effect with the default
+ value of gDot1qForwardAllStaticPorts."
+ ::= { gDot1qForwardUnregisteredEntry 3 }
+
+gDot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports configured by management in this VLAN
+ for which the Service Requirement attribute Forward
+ Unregistered Multicast Groups may not be dynamically
+ registered by GMRP. This value will be restored after
+ the device is reset. A port may not be added in this
+ set if it is already a member of the set of ports in
+ gDot1qForwardUnregisteredStaticPorts. The default value
+ is a string of zeros of appropriate length."
+ ::= { gDot1qForwardUnregisteredEntry 4 }
+
+-- -------------------------------------------------------------
+-- The Static (Destination-Address Filtering) Database
+-- -------------------------------------------------------------
+
+gDot1qStaticUnicastTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qStaticUnicastEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing filtering information for Unicast
+ MAC addresses for each Filtering Database, configured
+ into the device by (local or network) management
+ specifying the set of ports to which frames received
+ from specific ports and containing specific unicast
+ destination addresses are allowed to be forwarded. A
+ value of zero in this table as the port number from
+ which frames with a specific destination address are
+ received, is used to specify all ports for which there
+ is no specific entry in this table for that particular
+ destination address. Entries are valid for unicast
+ addresses only."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.7,
+ ISO/IEC 15802-3 Section 7.9.1"
+ ::= { gDot1qStatic 1 }
+
+gDot1qStaticUnicastEntry OBJECT-TYPE
+ SYNTAX GarpDot1qStaticUnicastEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Filtering information configured into the device by
+ (local or network) management specifying the set of
+ ports to which frames received from a specific port and
+ containing a specific unicast destination address are
+ allowed to be forwarded."
+ INDEX {
+ gDot1qFdbId,
+ gDot1qStaticUnicastAddress,
+ gDot1qStaticUnicastReceivePort
+ }
+ ::= { gDot1qStaticUnicastTable 1 }
+
+GarpDot1qStaticUnicastEntry ::=
+ SEQUENCE {
+ gDot1qStaticUnicastAddress
+ MacAddress,
+ gDot1qStaticUnicastReceivePort
+ INTEGER,
+ gDot1qStaticUnicastAllowedToGoTo
+ PortList,
+ gDot1qStaticUnicastStatus
+ INTEGER
+ }
+
+gDot1qStaticUnicastAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The destination MAC address in a frame to which this
+ entry's filtering information applies. This object must
+ take the value of a unicast address."
+ ::= { gDot1qStaticUnicastEntry 1 }
+
+gDot1qStaticUnicastReceivePort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Either the value '0', or the port number of the port
+ from which a frame must be received in order for this
+ entry's filtering information to apply. A value of zero
+ indicates that this entry applies on all ports of the
+ device for which there is no other applicable entry."
+ ::= { gDot1qStaticUnicastEntry 2 }
+
+gDot1qStaticUnicastAllowedToGoTo OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The set of ports for which a frame with a specific
+ unicast address will be flooded in the event that it
+ has not been learned. It also specifies the set of
+ ports a specific unicast address may be dynamically
+ learnt on. The gDot1qTpFdbTable will have an equivalent
+ entry with a gDot1qTpFdbPort value of '0' until this
+ address has been learnt, when it will be updated with
+ the port the address has been seen on. This only
+ applies to ports that are members of the VLAN, defined
+ by gDot1qVlanCurrentEgressPorts. The default value of
+ this object is a string of ones of appropriate length."
+ REFERENCE
+ "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
+ ::= { gDot1qStaticUnicastEntry 3 }
+
+gDot1qStaticUnicastStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ invalid(2),
+ permanent(3),
+ deleteOnReset(4),
+ deleteOnTimeout(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry.
+ other(1) - this entry is currently in use but
+ the conditions under which it will remain
+ so differ from the following values.
+ invalid(2) - writing this value to the object
+ removes the corresponding entry.
+ permanent(3) - this entry is currently in use
+ and will remain so after the next reset of
+ the bridge.
+ deleteOnReset(4) - this entry is currently in
+ use and will remain so until the next
+ reset of the bridge.
+ deleteOnTimeout(5) - this entry is currently in
+ use and will remain so until it is aged out."
+ DEFVAL { permanent }
+ ::= { gDot1qStaticUnicastEntry 4 }
+
+gDot1qStaticMulticastTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qStaticMulticastEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing filtering information for Multicast
+ and Broadcast MAC addresses for each VLAN, configured
+ into the device by (local or network) management
+ specifying the set of ports to which frames received
+ from specific ports and containing specific Multicast
+ and Broadcast destination addresses are allowed to be
+ forwarded. A value of zero in this table as the port
+ number from which frames with a specific destination
+ address are received, is used to specify all ports for
+ which there is no specific entry in this table for that
+ particular destination address. Entries are valid for
+ Multicast and Broadcast addresses only."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.7,
+ ISO/IEC 15802-3 Section 7.9.1"
+ ::= { gDot1qStatic 2 }
+
+gDot1qStaticMulticastEntry OBJECT-TYPE
+ SYNTAX GarpDot1qStaticMulticastEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Filtering information configured into the device by
+ (local or network) management specifying the set of
+ ports to which frames received from this specific port
+ for this VLAN and containing this Multicast or Broadcast
+ destination address are allowed to be forwarded."
+ INDEX {
+ gDot1qVlanIndex,
+ gDot1qStaticMulticastAddress,
+ gDot1qStaticMulticastReceivePort
+ }
+ ::= { gDot1qStaticMulticastTable 1 }
+
+GarpDot1qStaticMulticastEntry ::=
+ SEQUENCE {
+ gDot1qStaticMulticastVlanIndex
+ VlanIndex,
+ gDot1qStaticMulticastAddress
+ MacAddress,
+ gDot1qStaticMulticastReceivePort
+ INTEGER,
+ gDot1qStaticMulticastStaticEgressPorts
+ PortList,
+ gDot1qStaticMulticastForbiddenEgressPorts
+ PortList,
+ gDot1qStaticMulticastStatus
+ INTEGER,
+ gDot1qGmrpLearningPermit
+ INTEGER
+ }
+
+gDot1qStaticMulticastVlanIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ This is here to allow the VLAN Index to be saved along with
+ the corresponding multicast table entry."
+ ::= { gDot1qStaticMulticastEntry 1 }
+
+gDot1qStaticMulticastAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all}
+ The destination MAC address in a frame to which this
+ entry's filtering information applies. This object must
+ take the value of a Multicast or Broadcast address."
+ ::= { gDot1qStaticMulticastEntry 2 }
+
+gDot1qStaticMulticastReceivePort OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ Either the value '0', or the port number of the port
+ from which a frame must be received in order for this
+ entry's filtering information to apply. A value of zero
+ indicates that this entry applies on all ports of the
+ device for which there is no other applicable entry."
+ ::= { gDot1qStaticMulticastEntry 3 }
+
+gDot1qStaticMulticastStaticEgressPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports to which frames received from a
+ specific port and destined for a specific Multicast or
+ Broadcast MAC address must be forwarded, regardless of
+ any dynamic information e.g. from GMRP. A port may not
+ be added in this set if it is already a member of the
+ set of ports in gDot1qStaticMulticastForbiddenEgressPorts.
+ The default value of this object is a string of ones of
+ appropriate length."
+ ::= { gDot1qStaticMulticastEntry 4 }
+
+gDot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports to which frames received from a
+ specific port and destined for a specific Multicast or
+ Broadcast MAC address must not be forwarded, regardless
+ of any dynamic information e.g. from GMRP. A port may
+ not be added in this set if it is already a member of the
+ set of ports in gDot1qStaticMulticastStaticEgressPorts.
+ The default value of this object is a string of zeros of
+ appropriate length."
+ ::= { gDot1qStaticMulticastEntry 5 }
+
+gDot1qStaticMulticastStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ invalid(2),
+ permanent(3),
+ deleteOnReset(4),
+ deleteOnTimeout(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ This object indicates the status of this entry.
+ other(1) - this entry is currently in use but
+ the conditions under which it will remain
+ so differ from the following values.
+ invalid(2) - writing this value to the object
+ removes the corresponding entry.
+ permanent(3) - this entry is currently in use
+ and will remain so after the next reset of
+ the bridge.
+ deleteOnReset(4) - this entry is currently in
+ use and will remain so until the next
+ reset of the bridge.
+ deleteOnTimeout(5) - this entry is currently in
+ use and will remain so until it is aged out."
+ DEFVAL { permanent }
+ ::= { gDot1qStaticMulticastEntry 6 }
+
+gDot1qGmrpLearningPermit OBJECT-TYPE
+ SYNTAX INTEGER {
+ gmrpLearningEnable(1),
+ gmrpLearningDisable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to add a mcast to garp so that other devices can learn it."
+ ::= { gDot1qStaticMulticastEntry 7 }
+
+-- -------------------------------------------------------------
+-- The Current VLAN Database
+-- -------------------------------------------------------------
+
+gDot1qVlanNumDeletes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times a VLAN entry has been deleted from
+ the gDot1qVlanCurrentTable (for any reason). If an entry
+ is deleted, then inserted, and then deleted, this
+ counter will be incremented by 2."
+ ::= { gDot1qVlan 1 }
+
+gDot1qVlanCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing current configuration information
+ for each VLAN currently configured into the device by
+ (local or network) management, or dynamically created
+ as a result of GVRP requests received."
+ ::= { gDot1qVlan 2 }
+
+gDot1qVlanCurrentEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information for a VLAN configured into the device by
+ (local or network) management, or dynamically created
+ as a result of GVRP requests received."
+ INDEX { gDot1qVlanTimeMark, gDot1qVlanIndex }
+ ::= { gDot1qVlanCurrentTable 1 }
+
+GarpDot1qVlanCurrentEntry ::=
+ SEQUENCE {
+ gDot1qVlanTimeMark
+ TimeFilter,
+ gDot1qVlanIndex
+ VlanIndex,
+ gDot1qVlanFdbId
+ Unsigned32,
+ gDot1qVlanCurrentEgressPorts
+ PortList,
+ gDot1qVlanCurrentUntaggedPorts
+ PortList,
+ gDot1qVlanStatus
+ INTEGER,
+ gDot1qVlanCreationTime
+ TimeTicks
+ }
+
+gDot1qVlanTimeMark OBJECT-TYPE
+ SYNTAX TimeFilter
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A TimeFilter for this entry. See the TimeFilter
+ textual convention to see how this works."
+ ::= { gDot1qVlanCurrentEntry 1 }
+
+gDot1qVlanIndex OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The VLAN-ID or other identifier refering to this VLAN."
+ ::= { gDot1qVlanCurrentEntry 2 }
+
+gDot1qVlanFdbId OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Filtering Database used by this VLAN. This is one
+ of the gDot1qFdbId values in the gDot1qFdbTable. This
+ value is allocated automatically by the device whenever
+ the VLAN is created: either dynamically by GVRP, or by
+ management, in gDot1qVlanStaticTable. Allocation of this
+ value follows the learning constraints defined for this
+ VLAN in gDot1qLearningConstraintsTable."
+ ::= { gDot1qVlanCurrentEntry 3 }
+
+gDot1qVlanCurrentEgressPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of ports which are transmitting traffic for
+ this VLAN as either tagged or untagged frames."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.2.1"
+ ::= { gDot1qVlanCurrentEntry 4 }
+
+gDot1qVlanCurrentUntaggedPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of ports which are transmitting traffic for
+ this VLAN as untagged frames."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.2.1"
+ ::= { gDot1qVlanCurrentEntry 5 }
+
+gDot1qVlanStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ permanent(2),
+ dynamicGvrp(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry.
+ other(1) - this entry is currently in use but the
+ conditions under which it will remain so differ
+ from the following values.
+ permanent(2) - this entry, corresponding to an entry
+ in gDot1qVlanStaticTable, is currently in use and
+ will remain so after the next reset of the
+ device. The port lists for this entry include
+ ports from the equivalent gDot1qVlanStaticTable
+ entry and ports learnt dynamically.
+ dynamicGvrp(3) - this entry is currently in use
+ and will remain so until removed by GVRP. There
+ is no static entry for this VLAN and it will be
+ removed when the last port leaves the VLAN."
+ ::= { gDot1qVlanCurrentEntry 6 }
+
+gDot1qVlanCreationTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this VLAN was created."
+ ::= { gDot1qVlanCurrentEntry 7 }
+
+-- -------------------------------------------------------------
+-- The Static VLAN Database
+-- -------------------------------------------------------------
+
+gDot1qVlanStaticTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanStaticEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing static configuration information for
+ each VLAN configured into the device by (local or
+ network) management. All entries are permanent and will
+ be restored after the device is reset."
+ ::= { gDot1qVlan 3 }
+
+gDot1qVlanStaticEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanStaticEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Static information for a VLAN configured into the
+ device by (local or network) management."
+--
+-- This table is actually indexed by VLAN ID, however for the purposes
+-- of default value table generation, we introduce a phony index of
+-- the dimension of the VLAN slot table.
+--
+-- INDEX { gDot1qVlanIndex }
+--
+ INDEX { gDot1qVlanSlotIndex } -- Don't use this index at runtime
+ ::= { gDot1qVlanStaticTable 1 }
+
+GarpDot1qVlanStaticEntry ::=
+ SEQUENCE {
+ gDot1qVlanStaticName
+ DisplayString,
+-- SnmpAdminString,
+ gDot1qVlanStaticEgressPorts
+ PortList,
+ gDot1qVlanForbiddenEgressPorts
+ PortList,
+ gDot1qVlanStaticUntaggedPorts
+ PortList,
+ gDot1qVlanStaticRowStatus
+ RowStatus,
+ gDot1qGvrpLearningPermit
+ INTEGER,
+ gDot1qVlanSpanningTreeGroup
+ INTEGER
+
+ }
+
+gDot1qVlanStaticName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+-- SYNTAX SnmpAdminString (SIZE (0..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 'Default' }
+ An administratively assigned string, which may be used
+ to identify the VLAN."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.2.1"
+ ::= { gDot1qVlanStaticEntry 1 }
+
+gDot1qVlanStaticEgressPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports which are permanently assigned to the
+ egress list for this VLAN by management. Changes to a
+ bit in this object affect the per-port per-VLAN
+ Registrar control for Registration Fixed for the
+ relevant GVRP state machine on each port. A port may
+ not be added in this set if it is already a member of
+ the set of ports in gDot1qVlanForbiddenEgressPorts. The
+ default value of this object is a string of zeros of
+ appropriate length, indicating not fixed."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
+ ::= { gDot1qVlanStaticEntry 2 }
+
+gDot1qVlanForbiddenEgressPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports which are prohibited by management
+ from being included in the egress list for this VLAN.
+ Changes to this object that cause a port to be included
+ or excluded affect the per-port per-VLAN Registrar
+ control for Registration Forbidden for the relevant GVRP
+ state machine on each port. A port may not be added in
+ this set if it is already a member of the set of ports
+ in gDot1qVlanStaticEgressPorts. The default value of
+ this object is a string of zeros of appropriate length,
+ excluding all ports from the forbidden set."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
+ ::= { gDot1qVlanStaticEntry 3 }
+
+gDot1qVlanStaticUntaggedPorts OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 0:all }
+ The set of ports which should transmit egress packets
+ for this VLAN as untagged. The default value of this
+ object for the default VLAN (gDot1qVlanIndex = 1) is a string
+ of appropriate length including all ports. There is no
+ specified default for other VLANs. If a device agent cannot
+ support the set of ports being set then it will reject the
+ set operation with an error. An example might be if a
+ manager attempts to set more than one VLAN to be untagged
+ on egress where the device does not support this IEEE 802.1Q
+ option."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.2.1"
+ ::= { gDot1qVlanStaticEntry 4 }
+
+gDot1qVlanStaticRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object indicates the status of this entry."
+ ::= { gDot1qVlanStaticEntry 5 }
+
+gDot1qGvrpLearningPermit OBJECT-TYPE
+ SYNTAX INTEGER {
+ gvrpLearningEnable(1),
+ gvrpLearningDisable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to add a vlan to garp so that other devices can learn it."
+ --将一个vlan加入到garp中以允许其他交换机学习该vlan
+ ::= { gDot1qVlanStaticEntry 6 }
+
+gDot1qVlanSpanningTreeGroup OBJECT-TYPE
+ SYNTAX INTEGER (0..15)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to Get/Set current vlan's spanning-tree group num"
+ --用于获取/设置vlan的生成树组
+ ::= { gDot1qVlanStaticEntry 7 }
+
+gDot1qNextFreeLocalVlanIndex OBJECT-TYPE
+ SYNTAX INTEGER (0|4096..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The next available value for gDot1qVlanIndex of a local
+ VLAN entry in gDot1qVlanStaticTable. This will report
+ values >=4096 if a new Local VLAN may be created or else
+ the value 0 if this is not possible.
+
+ A row creation operation in this table for an entry with a local
+ VlanIndex value may fail if the current value of this object
+ is not used as the index. Even if the value read is used,
+ there is no guarantee that it will still be the valid index
+ when the create operation is attempted - another manager may
+ have already got in during the intervening time interval.
+ In this case, gDot1qNextFreeLocalVlanIndex should be re-read
+ and the creation re-tried with the new value.
+
+ This value will automatically change when the current value is
+ used to create a new row."
+ ::= { gDot1qVlan 4 }
+
+-- -------------------------------------------------------------
+-- The VLAN Port Configuration Table
+-- -------------------------------------------------------------
+
+gDot1qPortVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qPortVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing per port control and status
+ information for VLAN configuration in the device."
+ ::= { gDot1qVlan 5 }
+
+gDot1qPortVlanEntry OBJECT-TYPE
+ SYNTAX GarpDot1qPortVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information controlling VLAN configuration for a port
+ on the device. This is indexed by dot1dBasePort."
+ INDEX { gDot1dPortGmrp }
+ ::= { gDot1qPortVlanTable 1 }
+
+GarpDot1qPortVlanEntry ::=
+ SEQUENCE {
+ gDot1qPvid
+ VlanIndex,
+ gDot1qPortAcceptableFrameTypes
+ INTEGER,
+ gDot1qPortIngressFiltering
+ TruthValue,
+ gDot1qPortGvrpStatus
+ EnabledStatus,
+ gDot1qPortGvrpFailedRegistrations
+ Counter32,
+ gDot1qPortGvrpLastPduOrigin
+ MacAddress
+ }
+
+gDot1qPvid OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 1:all }
+ The PVID, the VLAN ID assigned to untagged frames or
+ Prority-Tagged frames received on this port."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.1.1"
+ DEFVAL { 1 }
+ ::= { gDot1qPortVlanEntry 1 }
+
+gDot1qPortAcceptableFrameTypes OBJECT-TYPE
+ SYNTAX INTEGER {
+ admitAll(1),
+ admitOnlyVlanTagged(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 1:all }
+ When this is admitOnlyVlanTagged(2) the device will
+ discard untagged frames or Prority-Tagged frames
+ received on this port. When admitAll(1), untagged
+ frames or Prority-Tagged frames received on this port
+ will be accepted and assigned to the PVID for this port.
+
+ This control does not affect VLAN independent BPDU
+ frames, such as GVRP and STP. It does affect VLAN
+ dependent BPDU frames, such as GMRP."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.1.3"
+ DEFVAL { admitAll }
+ ::= { gDot1qPortVlanEntry 2 }
+
+gDot1qPortIngressFiltering OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: {1:all}
+ When this is true(1) the device will discard incoming
+ frames for VLANs which do not include this Port in its
+ Member set. When false(2), the port will accept all
+ incoming frames.
+
+ This control does not affect VLAN independent BPDU
+ frames, such as GVRP and STP. It does affect VLAN
+ dependent BPDU frames, such as GMRP."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.1.4"
+ DEFVAL { false }
+ ::= { gDot1qPortVlanEntry 3 }
+
+gDot1qPortGvrpStatus OBJECT-TYPE
+ SYNTAX EnabledStatus { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: {enabled:all}
+ The state of GVRP operation on this port. The value
+ enabled(1) indicates that GVRP is enabled on this port,
+ as long as gDot1qGvrpStatus is also enabled for this
+ device. When disabled(2) but gDot1qGvrpStatus is still
+ enabled for the device, GVRP is disabled on this port:
+ any GVRP packets received will be silently discarded and
+ no GVRP registrations will be propagated from other
+ ports. This object affects all GVRP Applicant and
+ Registrar state machines on this port. A transition
+ from disabled(2) to enabled(1) will cause a reset of all
+ GVRP state machines on this port."
+ DEFVAL { disabled }
+ ::= { gDot1qPortVlanEntry 4 }
+
+gDot1qPortGvrpFailedRegistrations OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of failed GVRP registrations, for any
+ reason, on this port."
+ ::= { gDot1qPortVlanEntry 5 }
+
+gDot1qPortGvrpLastPduOrigin OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Source MAC Address of the last GVRP message
+ received on this port."
+ ::= { gDot1qPortVlanEntry 6 }
+
+-- -------------------------------------------------------------
+-- The GARP Port Table
+-- -------------------------------------------------------------
+
+gDot1dPortGarpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1dPortGarpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of GARP control information about every bridge
+ port. This is indexed by gDot1qBasePort."
+ ::= { gDot1dGarp 1 }
+
+gDot1dPortGarpEntry OBJECT-TYPE
+ SYNTAX GarpDot1dPortGarpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "GARP control information for a bridge port."
+ INDEX { gDot1dPortGmrp }
+ ::= { gDot1dPortGarpTable 1 }
+
+GarpDot1dPortGarpEntry ::=
+ SEQUENCE {
+ gDot1dPortEnable
+ INTEGER,
+ gDot1dPortGarpJoinTime
+ TimeInterval,
+ gDot1dPortGarpLeaveTime
+ TimeInterval,
+ gDot1dPortGarpLeaveAllTime
+ TimeInterval
+ }
+
+gDot1dPortEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The enabled/disabled status of the port for all
+ GARP protocol instances. This should be set
+ according to the current link state of the port"
+ REFERENCE
+ "IEEE 802.1D-1990: Section 4.5.5.2"
+ ::= { gDot1dPortGarpEntry 1 }
+
+gDot1dPortGarpJoinTime OBJECT-TYPE
+ SYNTAX TimeInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 20:all }
+ The GARP Join time, in centiseconds."
+ DEFVAL { 20 }
+ ::= { gDot1dPortGarpEntry 2 }
+
+gDot1dPortGarpLeaveTime OBJECT-TYPE
+ SYNTAX TimeInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 60:all }
+ The GARP Leave time, in centiseconds."
+ DEFVAL { 60 }
+ ::= { gDot1dPortGarpEntry 3 }
+
+gDot1dPortGarpLeaveAllTime OBJECT-TYPE
+ SYNTAX TimeInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { 1000:all }
+ The GARP LeaveAll time, in centiseconds."
+ DEFVAL { 1000 }
+ ::= { gDot1dPortGarpEntry 4 }
+
+gDot1dGmrpStatus OBJECT-TYPE
+ SYNTAX EnabledStatus { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { enabled }
+ The administrative status requested by management for
+ GMRP. The value enabled(1) indicates that GMRP should
+ be enabled on this device, in all VLANs, on all ports
+ for which it has not been specifically disabled. When
+ disabled(2), GMRP is disabled, in all VLANs, on all
+ ports and all GMRP packets will be forwarded
+ transparently. This object affects both Applicant and
+ Registrar state machines. A transition from disabled(2)
+ to enabled(1) will cause a reset of all GMRP state
+ machines on all ports."
+ DEFVAL { disabled }
+ ::= { gDot1dExtBase 1 }
+
+-- -------------------------------------------------------------
+-- The GMRP Port Configuration and Status Table
+-- -------------------------------------------------------------
+
+gDot1dPortGmrpTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1dPortGmrpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of GMRP control and status information about
+ every bridge port. Augments the gDot1qBasePortTable."
+ ::= { gDot1dGmrp 1 }
+
+gDot1dPortGmrpEntry OBJECT-TYPE
+ SYNTAX GarpDot1dPortGmrpEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "GMRP control and status information for a bridge port."
+ INDEX { gDot1dPortGmrp }
+ ::= { gDot1dPortGmrpTable 1 }
+
+GarpDot1dPortGmrpEntry ::=
+ SEQUENCE {
+ gDot1dPortGmrp
+ INTEGER,
+ gDot1dPortGmrpStatus
+ EnabledStatus,
+ gDot1dPortGmrpFailedRegistrations
+ Counter32,
+ gDot1dPortGmrpLastPduOrigin
+ MacAddress
+ }
+
+gDot1dPortGmrp OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The port number of the port for which this entry
+ contains GMRP management information."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.8.2.1.2"
+ ::= { gDot1dPortGmrpEntry 1 }
+
+gDot1dPortGmrpStatus OBJECT-TYPE
+ SYNTAX EnabledStatus { enabled(1), disabled(2) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "DURABLE: { enabled:all }
+ The administrative state of GMRP operation on this port. The
+ value enabled(1) indicates that GMRP is enabled on this port
+ in all VLANs as long as garpGmrpStatus is also enabled(1).
+ A value of disabled(2) indicates that GMRP is disabled on this
+ port in all VLANs: any GMRP packets received will
+ be silently discarded and no GMRP registrations will be
+ propagated from other ports. Setting this to a value of
+ enabled(1) will be stored by the agent but will only take effect
+ on the GMRP protocol operation if garpGmrpStatus also
+ indicates the value enabled(1). This object affects all
+ GMRP Applicant and Registrar state machines on this
+ port. A transition from disabled(2) to enabled(1) will
+ cause a reset of all GMRP state machines on this port."
+ DEFVAL { disabled }
+ ::= { gDot1dPortGmrpEntry 2 }
+
+gDot1dPortGmrpFailedRegistrations OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of failed GMRP registrations, for any
+ reason, in all VLANs, on this port."
+ ::= { gDot1dPortGmrpEntry 3 }
+
+gDot1dPortGmrpLastPduOrigin OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Source MAC Address of the last GMRP message
+ received on this port."
+ ::= { gDot1dPortGmrpEntry 4 }
+
+
+-- -------------------------------------------------------------
+-- The VLAN Learning Constraints Table
+-- -------------------------------------------------------------
+
+gDot1qLearningConstraintsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qLearningConstraintsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing learning constraints for sets of
+ Shared and Independendent VLANs."
+ REFERENCE
+ "IEEE 802.1Q/D11 Section 12.10.3.1"
+ ::= { gDot1qVlan 6 }
+
+gDot1qLearningConstraintsEntry OBJECT-TYPE
+ SYNTAX GarpDot1qLearningConstraintsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A learning constraint defined for a VLAN."
+ INDEX { gDot1qConstraintVlan, gDot1qConstraintSet }
+ ::= { gDot1qLearningConstraintsTable 1 }
+
+GarpDot1qLearningConstraintsEntry ::=
+ SEQUENCE {
+ gDot1qConstraintVlan
+ VlanIndex,
+ gDot1qConstraintSet
+ INTEGER,
+ gDot1qConstraintType
+ INTEGER,
+ gDot1qConstraintStatus
+ RowStatus
+ }
+
+gDot1qConstraintVlan OBJECT-TYPE
+ SYNTAX VlanIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The index of the row in gDot1qVlanCurrentTable for the
+ VLAN constrained by this entry."
+ ::= { gDot1qLearningConstraintsEntry 1 }
+
+gDot1qConstraintSet OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The identity of the constraint set to which
+ gDot1qConstraintVlan belongs. These values may be chosen
+ by the management station."
+ ::= { gDot1qLearningConstraintsEntry 2 }
+
+gDot1qConstraintType OBJECT-TYPE
+ SYNTAX INTEGER {
+ independent(1),
+ shared(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of constraint this entry defines.
+ independent(1) - the VLAN, gDot1qConstraintVlan,
+ uses an independent filtering database from all
+ other VLANs in the same set, defined by
+ gDot1qConstraintSet.
+ shared(2) - the VLAN, gDot1qConstraintVlan, shares
+ the same filtering database as all other VLANs
+ in the same set, defined by gDot1qConstraintSet."
+ ::= { gDot1qLearningConstraintsEntry 3 }
+
+gDot1qConstraintStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this entry."
+ ::= { gDot1qLearningConstraintsEntry 4 }
+
+gDot1qConstraintSetDefault OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The identity of the constraint set to which a VLAN
+ belongs, if there is not an explicit entry for that VLAN
+ in gDot1qLearningConstraintsTable."
+ ::= { gDot1qVlan 7 }
+
+gDot1qConstraintTypeDefault OBJECT-TYPE
+ SYNTAX INTEGER {
+ independent(1),
+ shared(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The type of constraint set to which a VLAN belongs, if
+ there is not an explicit entry for that VLAN in
+ gDot1qLearningConstraintsTable. The types are as defined
+ for gDot1qConstraintType."
+ ::= { gDot1qVlan 8 }
+
+-- -------------------------------------------------------------
+-- GARP MIB - Conformance Information
+-- -------------------------------------------------------------
+
+garpMIBConformance OBJECT IDENTIFIER ::= { garpMib 2 }
+garpMIBGroups OBJECT IDENTIFIER ::= { garpMIBConformance 1 }
+garpMIBCompliances OBJECT IDENTIFIER
+ ::= { garpMIBConformance 2 }
+
+-- -------------------------------------------------------------
+-- units of conformance
+-- -------------------------------------------------------------
+
+garpMIBBaseGroup OBJECT-GROUP
+ OBJECTS {
+ gDot1qVlanVersionNumber,
+ gDot1qMaxVlanId,
+ gDot1qMaxSupportedVlans,
+ gDot1qNumVlans,
+ gDot1qGvrpStatus,
+ gDot1qFdbDynamicCount,
+ gDot1qTpFdbPort,
+ gDot1qTpFdbStatus,
+ gDot1qTpGroupEgressPorts,
+ gDot1qTpGroupLearnt,
+ gDot1qForwardAllPorts,
+ gDot1qForwardAllStaticPorts,
+ gDot1qForwardAllForbiddenPorts,
+ gDot1qForwardUnregisteredPorts,
+ gDot1qForwardUnregisteredStaticPorts,
+ gDot1qForwardUnregisteredForbiddenPorts,
+ gDot1qStaticUnicastAllowedToGoTo,
+ gDot1qStaticUnicastStatus,
+ gDot1qStaticMulticastStaticEgressPorts,
+ gDot1qStaticMulticastForbiddenEgressPorts,
+ gDot1qStaticMulticastStatus,
+ gDot1qVlanNumDeletes,
+ gDot1qVlanFdbId,
+ gDot1qVlanCurrentEgressPorts,
+ gDot1qVlanCurrentUntaggedPorts,
+ gDot1qVlanStatus,
+ gDot1qVlanCreationTime,
+ gDot1qVlanStaticName,
+ gDot1qVlanStaticEgressPorts,
+ gDot1qVlanForbiddenEgressPorts,
+ gDot1qVlanStaticUntaggedPorts,
+ gDot1qVlanStaticRowStatus,
+ gDot1qNextFreeLocalVlanIndex,
+ gDot1qPvid,
+ gDot1qPortAcceptableFrameTypes,
+ gDot1qPortIngressFiltering,
+ gDot1qPortGvrpStatus,
+ gDot1qPortGvrpFailedRegistrations,
+ gDot1qPortGvrpLastPduOrigin,
+ gDot1dPortGarpJoinTime,
+ gDot1dPortGarpLeaveTime,
+ gDot1dPortGarpLeaveAllTime,
+ gDot1dPortGmrpStatus,
+ gDot1dPortGmrpFailedRegistrations,
+ gDot1dPortGmrpLastPduOrigin,
+ gDot1dGmrpStatus,
+ gDot1qConstraintType,
+ gDot1qConstraintStatus,
+ gDot1qConstraintSetDefault,
+ gDot1qConstraintTypeDefault
+ }
+ STATUS current
+ DESCRIPTION
+ "GARP module groups."
+ ::= { garpMIBGroups 1 }
+
+-- -------------------------------------------------------------
+-- the gDot1qExtend group
+-- -------------------------------------------------------------
+-- -------------------------------------------------------------
+-- the double tagging table
+-- -------------------------------------------------------------
+gDot1qDoubleTagging OBJECT-TYPE
+ SYNTAX INTEGER{
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The global QinQ status"
+ --全局QinQ的状态
+ ::= { gDot1qExtend 1 }
+
+gDot1qTpid OBJECT-TYPE
+ SYNTAX INTEGER(1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The tag protocol id of service provider, this value is used to
+ determine if a incoming packets is tagged and used when insert a
+ new tag"
+ --用于配置服务提供者的vlan协议号,用于判断端口是否为tagged或者是
+ --为报文插入一个新的tag头时使用
+ ::= { gDot1qExtend 2 }
+
+gDot1qDoubleTaggingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qDoubleTaggingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to config the double tagging function."
+ --该表用于配置双tag头相关的功能.
+ ::= { gDot1qExtend 3 }
+
+gDot1qDoubleTaggingEntry OBJECT-TYPE
+ SYNTAX GarpDot1qDoubleTaggingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about double tagging table entry."
+ --双tag表项
+ INDEX { gDot1qDoubleTaggingPort }
+ ::= { gDot1qDoubleTaggingTable 1 }
+
+GarpDot1qDoubleTaggingEntry ::=
+ SEQUENCE {
+ gDot1qDoubleTaggingPort
+ INTEGER,
+ gDot1qDoubleTaggingMode
+ INTEGER,
+ gDot1qPortInnerTpid
+ INTEGER,
+ gDot1qPortOuterTpid
+ INTEGER
+ }
+
+gDot1qDoubleTaggingPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of double tagging entry."
+ --双tag表的索引
+ ::= { gDot1qDoubleTaggingEntry 1 }
+
+gDot1qDoubleTaggingMode OBJECT-TYPE
+ SYNTAX INTEGER{
+ dtagModeNone(0),
+ dtagModeInternal(1),
+ dtagModeExternal(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Port's 8021q-in-8021q mode:
+ dtagModeNone means QinQ is disabled;
+ dtagModeInternal means incoming pkt's will be inserted a tag
+ if it has no tag or its' tag-id doesn't match that of the port.
+ dtagModeExternal means incoming pkt's tag is always be ignored
+ and a new tag is inserted."
+ --配置端口的QinQ模式，dtagModeNone为关闭端口的QinQ，dtagModeInternal只有
+ --vlan协议号与端口的配置不同时才在报文中插入新的tag头，dtagModeExternal意
+ --味着端口总是忽略报文的tag属性而为报文新添一个tag头
+ ::= { gDot1qDoubleTaggingEntry 2 }
+
+gDot1qPortInnerTpid OBJECT-TYPE
+ SYNTAX INTEGER(1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled."
+ --双tag使能时,用于配置报文原始tag头的tpid
+ ::= { gDot1qDoubleTaggingEntry 3 }
+
+gDot1qPortOuterTpid OBJECT-TYPE
+ SYNTAX INTEGER(1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to change the new tag's(i.e.service-provider tag) tpid of packet when dtag enabled."
+ --双tag使能时,用于配置报文新tag头的tpid
+ ::= { gDot1qDoubleTaggingEntry 4 }
+
+gDot1qInnerTpid OBJECT-TYPE
+ SYNTAX INTEGER(1..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to change the original tag's(i.e.customer tag) tpid of packet when dtag enabled."
+ --双tag使能时,用于配置报文原始tag头的tpid
+ ::= { gDot1qExtend 4 }
+-- -------------------------------------------------------------
+-- the current VLAN MAC Table
+-- -------------------------------------------------------------
+gDot1qVlanMacTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanMacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to assign a VLAN ID for a packet based on
+ the source MAC Address. If an entry is found, then the VLAN
+ ID, PRIORITY of vlan mac table will be used for the packet."
+ --该表用于基于报文的源MAC地址为报文添加一个tag头，如果找到匹配的表
+ --项，那么VLAN MAC表的vlan id以及优先级就会被添加到报文上.
+ ::= { gDot1qExtend 5 }
+
+gDot1qVlanMacEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanMacEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a vlan mac table entry."
+ --vlan mac表项的信息
+ INDEX { gDot1qVlanMacAddress }
+ ::= { gDot1qVlanMacTable 1 }
+
+GarpDot1qVlanMacEntry ::=
+ SEQUENCE {
+ gDot1qVlanMacAddress
+ MacAddress,
+ gDot1qVlanMacNewVlanId
+ INTEGER,
+ gDot1qVlanMacNewPriority
+ INTEGER,
+ gDot1qVlanMacStatus
+ INTEGER
+ }
+
+gDot1qVlanMacAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of vlan mac table entry."
+ --vlan mac表的索引
+ ::= { gDot1qVlanMacEntry 1 }
+
+gDot1qVlanMacNewVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Vlan id to be assigned to the packet."
+ --将要为报文添加的vlan id
+ ::= { gDot1qVlanMacEntry 2 }
+
+gDot1qVlanMacNewPriority OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Priority to be assigned to the packet."
+ --将要为报文添加的优先级
+ ::= { gDot1qVlanMacEntry 3 }
+
+gDot1qVlanMacStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ active(1),
+ createAndGo(2),
+ destroy(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "table entry status."
+ --表项的状态
+ ::= { gDot1qVlanMacEntry 4 }
+-- -------------------------------------------------------------
+-- the current VLAN SUBNET Table
+-- -------------------------------------------------------------
+gDot1qVlanSubnetTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanSubnetEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to assign a VLAN ID for a packet based on
+ the source IP Address."
+ --该表用于基于报文的源ip为报文添加tag头
+ ::= { gDot1qExtend 6 }
+
+gDot1qVlanSubnetEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanSubnetEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a vlan subnet table entry."
+ --vlan subnet表的表项信息
+ INDEX { gDot1qVlanSubnetIpAddress, gDot1qVlanSubnetIpMask }
+ ::= { gDot1qVlanSubnetTable 1 }
+
+GarpDot1qVlanSubnetEntry ::=
+ SEQUENCE {
+ gDot1qVlanSubnetIpAddress
+ IpAddress,
+ gDot1qVlanSubnetIpMask
+ IpAddress,
+ gDot1qVlanSubnetNewVlanId
+ INTEGER,
+ gDot1qVlanSubnetNewPriority
+ INTEGER,
+ gDot1qVlanSubnetStatus
+ INTEGER
+ }
+
+gDot1qVlanSubnetIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The first index of vlan subnet table entry."
+ --vlan subnet 表的第一个索引
+ ::= { gDot1qVlanSubnetEntry 1 }
+
+gDot1qVlanSubnetIpMask OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The second index of vlan subnet table entry."
+ --vlan subnet 表的第二个索引
+ ::= { gDot1qVlanSubnetEntry 2 }
+
+gDot1qVlanSubnetNewVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Vlan id to be assigned to the packet."
+ --将要为报文添加的vlan id
+ ::= { gDot1qVlanSubnetEntry 3 }
+
+gDot1qVlanSubnetNewPriority OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Priority to be assigned to the packet."
+ --将要添加给报文的优先级值
+ ::= { gDot1qVlanSubnetEntry 4 }
+
+gDot1qVlanSubnetStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ active(1),
+ createAndGo(2),
+ destroy(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "table entry status."
+ --表项的状态
+ ::= { gDot1qVlanSubnetEntry 5 }
+-- -------------------------------------------------------------
+-- the current VLAN PROTOCOL Table
+-- -------------------------------------------------------------
+gDot1qVlanProtoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanProtoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to assign a VLAN for a packet based
+ on the protocol(FrameType,EtherType)and the ingress port."
+ --该表用于基于报文的协议字段为报文添加新的tag头
+ ::= { gDot1qExtend 7 }
+
+gDot1qVlanProtoEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanProtoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a vlan protocol table entry."
+ --基于协议的vlan表的表项
+ INDEX { gDot1qVlanProtoFrameType, gDot1qVlanProtoEthertype, gDot1qVlanProtoPortId }
+ ::= { gDot1qVlanProtoTable 1 }
+
+GarpDot1qVlanProtoEntry ::=
+ SEQUENCE {
+ gDot1qVlanProtoFrameType
+ INTEGER,
+ gDot1qVlanProtoEthertype
+ INTEGER,
+ gDot1qVlanProtoPortId
+ INTEGER,
+ gDot1qVlanProtoNewVlanId
+ INTEGER,
+ gDot1qVlanProtoStatus
+ INTEGER
+ }
+
+gDot1qVlanProtoFrameType OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Frame type：the first index of vlan protocol entry."
+ --Frame type：基于协议的vlan表的第一个索引.
+ ::= { gDot1qVlanProtoEntry 1 }
+
+gDot1qVlanProtoEthertype OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ether type：the second index of vlan protocol entry."
+ --Ether type：基于协议的vlan表的第二个索引.
+ ::= { gDot1qVlanProtoEntry 2 }
+
+gDot1qVlanProtoPortId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Ingress, wthe third index of vlan protocol entry."
+ --报文的入端口,基于协议的vlan表的第三个索引
+ ::= { gDot1qVlanProtoEntry 3 }
+
+gDot1qVlanProtoNewVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Vlan id to be assigned to packet."
+ --将要赋予报文的vlan id
+ ::= { gDot1qVlanProtoEntry 4 }
+
+gDot1qVlanProtoStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ active(1),
+ createAndGo(2),
+ destroy(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "table entry status."
+ --表项的状态
+ ::= { gDot1qVlanProtoEntry 5 }
+-- -------------------------------------------------------------
+-- the current VLAN TRANSLATION Table
+-- -------------------------------------------------------------
+gDot1qVlanTranslationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanTransEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to to translate the VLAN ID of an incoming
+ tagged packet to another VLAN ID based on the ingress port and
+ incoming packet VLAN ID."
+ --该表用于基于报文的vlan号和入端口转换报文的vlan id
+ ::= { gDot1qExtend 8 }
+
+gDot1qVlanTransEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanTransEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a vlan translation table entry."
+ --vlan转换表的表项信息
+ INDEX { gDot1qVlanTransVlanId, gDot1qVlanTransPortId }
+ ::= { gDot1qVlanTranslationTable 1 }
+
+GarpDot1qVlanTransEntry ::=
+ SEQUENCE {
+ gDot1qVlanTransVlanId
+ INTEGER,
+ gDot1qVlanTransPortId
+ INTEGER,
+ gDot1qVlanTransNewVlanId
+ INTEGER,
+ gDot1qVlanTransNewPriority
+ INTEGER,
+ gDot1qVlanTransStatus
+ INTEGER
+ }
+
+gDot1qVlanTransVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The first index of vlan translation table entry."
+ --vlan转换表项的第一个索引
+ ::= { gDot1qVlanTransEntry 1 }
+
+gDot1qVlanTransPortId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The second index of vlan translation table entry."
+ --vlan转换表项的第二个索引
+ ::= { gDot1qVlanTransEntry 2 }
+
+gDot1qVlanTransNewVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The new vlan id to be assigned to the packet who match
+ a vlan translation table entry."
+ --转换后的报文的新的vlan id值
+ ::= { gDot1qVlanTransEntry 3 }
+
+gDot1qVlanTransNewPriority OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The priority field of vlan translation table."
+ --VLAN转换表中的报文优先级字段
+ ::= { gDot1qVlanTransEntry 4 }
+
+gDot1qVlanTransStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ active(1),
+ createAndGo(2),
+ destroy(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "table entry status."
+ --表项的状态
+ ::= { gDot1qVlanTransEntry 5 }
+-- -------------------------------------------------------------
+-- gDot1qExtend other
+-- -------------------------------------------------------------
+gDot1qVlanSubnetPrecede OBJECT-TYPE
+ SYNTAX INTEGER{
+ true(1),
+ false(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to config whether the IP-Subnet Based VLAN has a higher
+ precedence than the MAC Based VLAN."
+ --用于配置是否基于ip的vlan比基于MAC的vlan具有更高的优先级
+ ::= { gDot1qExtend 9 }
+
+gDot1qVlanTransEnable OBJECT-TYPE
+ SYNTAX INTEGER{
+ true(1),
+ false(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Used to config current vlan-translation's status."
+ --vlan转换的使能开关
+ ::= { gDot1qExtend 10 }
+
+-- -------------------------------------------------------------
+-- The Stack VLAN Database
+-- -------------------------------------------------------------
+gDot1qStackVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qStackVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing stack vlan configuration information for
+ each stack vlan configured into the device by management."
+ --该表用于显示和配置Stack VLAN相关的信息.
+ ::={ gDot1qExtend 11 }
+
+ gDot1qStackVlanEntry OBJECT-TYPE
+ SYNTAX GarpDot1qStackVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information controlling stack VLAN configuration for a port
+ on the device. This is indexed by port and end vlan id."
+ --Stack VLAN表项,以端口号和结束VLAN ID为索引.
+ INDEX { gDot1qStackVlanPort, gDot1qEndStackVlan }
+ ::= { gDot1qStackVlanTable 1 }
+
+ GarpDot1qStackVlanEntry ::=
+ SEQUENCE {
+ gDot1qStackVlanPort
+ INTEGER,
+ gDot1qStartStackVlan
+ INTEGER,
+ gDot1qEndStackVlan
+ INTEGER,
+ gDot1qTargetStackVlan
+ INTEGER,
+ gDot1qStackVlanRowStatus
+ RowStatus
+ }
+
+ gDot1qStackVlanPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The index of stack vlan."
+ --Stack VLAN的索引.
+ ::={ gDot1qStackVlanEntry 1 }
+
+ gDot1qStartStackVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The start vlan of the serial vlans we want to insert a new vlan tag."
+ --Stack VLAN范围的起始VLAN ID.
+ ::={ gDot1qStackVlanEntry 2 }
+
+ gDot1qEndStackVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The end vlan of the serial vlans we want to insert a new vlan tag."
+ --Stack VLAN范围的结束VLAN ID.
+ ::={ gDot1qStackVlanEntry 3 }
+
+ gDot1qTargetStackVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The target vlan of the serial vlans we want to insert."
+ --要插入的目标VLAN ID.
+ ::={ gDot1qStackVlanEntry 4 }
+
+ gDot1qStackVlanRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Describe the oprations for the entry:4-create 6-delete"
+ --设置Stack VLAN:4-添加 6-删除.
+ ::= { gDot1qStackVlanEntry 5 }
+
+-- -------------------------------------------------------------
+-- The VLAN Passthrough Database
+-- -------------------------------------------------------------
+gDot1qVlanPassthroughTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanPassthroughEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing vlan passthrough configuration information for
+ each vlan passthrough configured into the device by management."
+ --该表用于显示和配置VLAN透传相关的信息.
+ ::={ gDot1qExtend 12 }
+
+ gDot1qVlanPassthroughEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanPassthroughEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information controlling VLAN passthrough configuration for a port
+ on the device. This is indexed by port and end vlan id."
+ --VLAN透传表项,以端口号和结束VLAN ID为索引.
+ INDEX { gDot1qPassthroughPort, gDot1qEndPassthroughVlan }
+ ::= { gDot1qVlanPassthroughTable 1 }
+
+GarpDot1qVlanPassthroughEntry ::=
+ SEQUENCE {
+ gDot1qPassthroughPort
+ INTEGER,
+ gDot1qStartPassthroughVlan
+ INTEGER,
+ gDot1qEndPassthroughVlan
+ INTEGER,
+ gDot1qPassthroughRowStatus
+ RowStatus
+ }
+
+ gDot1qPassthroughPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The index of passthrough entry."
+ --VLAN透传的索引
+ ::={ gDot1qVlanPassthroughEntry 1 }
+
+ gDot1qStartPassthroughVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The start vlan of the serial vlans we want to passthrough."
+ --配置VLAN透传范围的起始VLAN
+ ::={ gDot1qVlanPassthroughEntry 2 }
+
+ gDot1qEndPassthroughVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4095)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The end vlan of the serial vlans we want to passthrough. "
+ --配置VLAN透传范围的结束VLAN
+ ::={ gDot1qVlanPassthroughEntry 3 }
+
+ gDot1qPassthroughRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Describe the oprations for the entry:4-create 6-delete."
+ --设置VLAN透传:4-添加 6-删除.
+ ::= { gDot1qVlanPassthroughEntry 4 }
+
+-- -------------------------------------------------------------
+-- The VLAN SWAP Database
+-- -------------------------------------------------------------
+ gDot1qVlanSwapTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GarpDot1qVlanSwapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table containing vlan swap configuration information for
+ each vlan swap configured into the device by management."
+ --该表用于显示和配置VLAN交换相关的信息.
+ ::={ gDot1qExtend 13 }
+
+ gDot1qVlanSwapEntry OBJECT-TYPE
+ SYNTAX GarpDot1qVlanSwapEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information controlling VLAN swap configuration for a port
+ on the device. This is indexed by port and end vlan id."
+ --VLAN交换表项,以端口号和结束VLAN ID为索引.
+ INDEX { gDot1qVlanSwapPort, gDot1qEndSwapVlan }
+ ::= { gDot1qVlanSwapTable 1 }
+
+ GarpDot1qVlanSwapEntry ::=
+ SEQUENCE {
+ gDot1qVlanSwapPort
+ INTEGER,
+ gDot1qStartSwapVlan
+ INTEGER,
+ gDot1qEndSwapVlan
+ INTEGER,
+ gDot1qTargetSwapVlan
+ INTEGER,
+ gDot1qVlanSwapRowStatus
+ RowStatus
+ }
+
+ gDot1qVlanSwapPort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The index of vlan swap entry."
+ --VLAN交换的索引
+ ::={ gDot1qVlanSwapEntry 1 }
+
+ gDot1qStartSwapVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The start vlan of the serial vlans we want to swap."
+ --配置VLAN交换范围的起始VLAN
+ ::={ gDot1qVlanSwapEntry 2 }
+
+ gDot1qEndSwapVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The end vlan of the serial vlans we want to swap. "
+ --配置VLAN交换范围的结束VLAN
+ ::={ gDot1qVlanSwapEntry 3 }
+
+ gDot1qTargetSwapVlan OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The target vlan of the serial vlans we want to swap."
+ --要交换的目标VLAN ID.
+ ::={ gDot1qVlanSwapEntry 4 }
+
+ gDot1qVlanSwapRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Describe the oprations for the entry:4-create 6-delete."
+ --设置VLAN交换:4-添加 6-删除.
+ ::= { gDot1qVlanSwapEntry 5 }
+
+---在marvell芯片中使用
+gDot1qProtocolVlan OBJECT IDENTIFIER ::= { gDot1qExtend 14 }
+
+gDot1qProtocolVlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GDot1qProtocolVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip"
+ --该表用于基于报文的协议字段为报文进行分类，在marvell芯片中使用
+ ::= { gDot1qProtocolVlan 1 }
+
+gDot1qProtocolVlanEntry OBJECT-TYPE
+ SYNTAX GDot1qProtocolVlanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a vlan protocol table entry."
+ --基于协议的vlan表的表项
+ INDEX { protocolVlanTableIndex }
+ ::= { gDot1qProtocolVlanTable 1 }
+
+GDot1qProtocolVlanEntry ::=
+ SEQUENCE {
+ protocolVlanTableIndex
+ INTEGER,
+ protocolVlanTableEthertype
+ INTEGER,
+ protocolVlanTableProtocol
+ INTEGER,
+ protocolVlanTableStatus
+ RowStatus
+ }
+
+protocolVlanTableIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..11)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "index of vlan protocol entry."
+ --基于协议的vlan表的索引.
+ ::= { gDot1qProtocolVlanEntry 1 }
+
+protocolVlanTableEthertype OBJECT-TYPE
+ SYNTAX INTEGER(0..65535)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "ether type of packet."
+ --报文的以太网类型.
+ ::= { gDot1qProtocolVlanEntry 2 }
+
+protocolVlanTableProtocol OBJECT-TYPE
+ SYNTAX INTEGER{
+ ethernetv2(1),
+ non-snap-llc(2),
+ ethernetv2-non-snap-llc(3),
+ snap-llc(4),
+ ethernetv2-snap-llc(5),
+ non-snap-llc-snap-llc(6),
+ ethernetv2-non-snap-llc-snap-llc(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "protocol of packet.bit 0 is ethernetv2, bit 1 is non-snap-llc, bit 2 is snap-llc."
+ --报文的协议类型，位0表示ethernetv2，位1表示non-snap-llc，位2表示snap-llc
+ ::= { gDot1qProtocolVlanEntry 3 }
+
+protocolVlanTableStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "table entry status."
+ --表项的状态
+ ::= { gDot1qProtocolVlanEntry 4 }
+
+gDot1qProtocolVlanActionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GDot1qProtocolVlanActionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to assign a VLAN for a packet based
+ on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip"
+ --该表用于基于报文的协议字段为报文添加新的tag头，在marvell芯片中使用
+ ::= { gDot1qProtocolVlan 2 }
+
+gDot1qProtocolVlanActionEntry OBJECT-TYPE
+ SYNTAX GDot1qProtocolVlanActionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a vlan protocol aciton table entry."
+ --基于协议的vlan动作表的表项
+ INDEX { protocolVlanAcitonTablePort, protocolVlanTableIndex}
+ ::= { gDot1qProtocolVlanActionTable 1 }
+
+GDot1qProtocolVlanActionEntry ::=
+ SEQUENCE {
+ protocolVlanAcitonTablePort
+ INTEGER,
+ protocolVlanActionTableNewVlan
+ VlanId,
+ protocolVlanActionTableStatus
+ RowStatus
+ }
+
+protocolVlanAcitonTablePort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "port index."
+ --端口索引
+ ::= { gDot1qProtocolVlanActionEntry 1 }
+
+protocolVlanActionTableNewVlan OBJECT-TYPE
+ SYNTAX VlanId
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "new vlan id of packet."
+ --报文新的VLAN号.
+ ::= { gDot1qProtocolVlanActionEntry 2 }
+
+protocolVlanActionTableStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "table entry status."
+ --表项的状态
+ ::= { gDot1qProtocolVlanActionEntry 3 }
+
+gDot1qProtocolVlanAdminTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GDot1qProtocolVlanAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to enable assign a VLAN for a packet based
+ on the protocol(FrameType,EtherType)and the ingress port.only for marvell chip"
+ --该表用于使能基于报文的协议字段为报文添加新的tag头，在marvell芯片中使用
+ ::= { gDot1qProtocolVlan 3 }
+
+gDot1qProtocolVlanAdminEntry OBJECT-TYPE
+ SYNTAX GDot1qProtocolVlanAdminEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a vlan protocol admin table entry."
+ --使能基于协议的vlan表的表项
+ INDEX { protocolVlanAdminTablePort }
+ ::= { gDot1qProtocolVlanAdminTable 1 }
+
+GDot1qProtocolVlanAdminEntry ::=
+ SEQUENCE {
+ protocolVlanAdminTablePort
+ INTEGER,
+ protocolVlanAdminTableEnable
+ TruthValue,
+ }
+
+protocolVlanAdminTablePort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "port index."
+ --端口索引
+ ::= { gDot1qProtocolVlanAdminEntry 1 }
+
+protocolVlanAdminTableEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "enable protocol-based vlan function of a port."
+ --使能端口的基于协议的VLAN功能.
+ ::= { gDot1qProtocolVlanAdminEntry 2 }
+
+
+gDot1qTranslateVlan OBJECT IDENTIFIER ::= { gDot1qExtend 15 }
+
+gDot1qTranslateVlanIngressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GDot1qTranslateVlanIngressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip"
+ --替换vlan全局表项
+ ::= { gDot1qTranslateVlan 1 }
+
+
+gDot1qTranslateVlanIngressEntry OBJECT-TYPE
+ SYNTAX GDot1qTranslateVlanIngressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "entry of ingress vlan translate."
+ --入口vlan替换表项
+ INDEX { translateVlanIngressTableIndex }
+ ::= { gDot1qTranslateVlanIngressTable 1 }
+
+GDot1qTranslateVlanIngressEntry ::=
+ SEQUENCE {
+ translateVlanIngressTableIndex
+ INTEGER,
+ translateIngressTargetVlanID
+ INTEGER,
+ }
+
+translateVlanIngressTableIndex OBJECT-TYPE
+ SYNTAX INTEGER(1..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "index of ingress vlan."
+ --入口VLAN 索引.
+ ::= { gDot1qTranslateVlanIngressEntry 1 }
+
+translateIngressTargetVlanID OBJECT-TYPE
+ SYNTAX INTEGER(0..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Target vlan ID.
+ 0 means not set"
+ --目标vlan ID. 0:表示没有设置,不能将目标vlan与原vlan设置相同
+ ::= { gDot1qTranslateVlanIngressEntry 2 }
+
+gDot1qTranslateVlanEgressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GDot1qTranslateVlanEgressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to classify a packet based on the protocol(FrameType,EtherType).only for marvell chip"
+ --替换vlan全局表项
+ ::= { gDot1qTranslateVlan 2 }
+
+gDot1qTranslateVlanEgressEntry OBJECT-TYPE
+ SYNTAX GDot1qTranslateVlanEgressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "entry of Egress vlan translate."
+ --出口vlan替换表项
+ INDEX { translateVlanEgressTableIndex }
+ ::= { gDot1qTranslateVlanEgressTable 1 }
+
+GDot1qTranslateVlanEgressEntry ::=
+ SEQUENCE {
+ translateVlanEgressTableIndex
+ INTEGER,
+ translateEgressTargetVlanID
+ INTEGER,
+ }
+translateVlanEgressTableIndex OBJECT-TYPE
+ SYNTAX INTEGER(1..4094)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "index of Egress vlan."
+ --出口VLAN 索引.
+ ::= { gDot1qTranslateVlanEgressEntry 1 }
+
+translateEgressTargetVlanID OBJECT-TYPE
+ SYNTAX INTEGER(0..4094)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Target vlan ID.
+ 0 means not set"
+ --目标vlan ID. 0:表示没有设置,不能将目标vlan与原vlan设置相同
+ ::= { gDot1qTranslateVlanEgressEntry 2 }
+
+
+
+gDot1qTranslateVlanPortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GDot1qTranslateVlanPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "translate vlan port list"
+ --替换vlan端口开启列表
+ ::= { gDot1qTranslateVlan 3 }
+
+gDot1qTranslateVlanPortEntry OBJECT-TYPE
+ SYNTAX GDot1qTranslateVlanPortEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "port entry of vlan translate."
+ --vlan替换端口使能表项
+ INDEX { translateVlanTablePort }
+ ::= { gDot1qTranslateVlanPortTable 1 }
+
+GDot1qTranslateVlanPortEntry ::=
+ SEQUENCE {
+ translateVlanTablePort
+ INTEGER,
+ translateTargetVlanIngressTableEnable
+ TruthValue,
+ translateTargetVlanEgressTableEnable
+ TruthValue
+ }
+translateVlanTablePort OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "port index."
+ --端口索引
+ ::= { gDot1qTranslateVlanPortEntry 1 }
+
+translateTargetVlanIngressTableEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "enable ingress Translate vlan function of a port.1:enable;2:disable"
+ --使能入端口的VLAN替换功能 1表示使能，2表示禁止.
+ ::= { gDot1qTranslateVlanPortEntry 2 }
+
+ translateTargetVlanEgressTableEnable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "enable Egress Translate vlan function of a port.1:enable;2:disable"
+ --使能出端口的VLAN替换功能 1表示使能，2表示禁止.
+ ::= { gDot1qTranslateVlanPortEntry 3 }
+
+
+-- -------------------------------------------------------------
+-- GARP MIB - compliance statements
+-- -------------------------------------------------------------
+
+garpMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for the GARP module."
+
+ MODULE
+ MANDATORY-GROUPS {
+ garpMIBBaseGroup
+ }
+ ::= { garpMIBCompliances 1 }
+
+END
|