diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB | |
| download | mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip | |
Diffstat (limited to 'MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB')
| -rw-r--r-- | MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB b/MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB new file mode 100644 index 0000000..0ad569f --- /dev/null +++ b/MIBS/glassway/NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB @@ -0,0 +1,373 @@ +NSCRTV-HFCEMS-OPTICALTRANSMITTERDIRECTLY-MIB DEFINITIONS ::= BEGIN
+-- *****************************************************************************
+-- 附录H 直接调制光发射机MIB
+-- *****************************************************************************
+
+IMPORTS
+ OBJECT-TYPE
+ FROM RFC-1212
+ DisplayString
+ FROM RFC1213-MIB
+ otdIdent
+ FROM NSCRTV-ROOT;
+
+ otdVendorOID OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "此对象提供厂商对直接调制光发送机MIB的扩充，无扩充时此对象应指向直接调制光发送
+ 机节点otdIdent。"
+ ::= { otdIdent 1 }
+
+ otdSlotNumber OBJECT-TYPE
+ SYNTAX INTEGER ( 0..32767 )
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "下行光发送机数量或机架插槽数量。"
+ ::= { otdIdent 2 }
+
+ otdOptDeviceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OtdOptDeviceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "下行光发送机信息表。"
+ ::= { otdIdent 3 }
+
+ otdOptDeviceEntry OBJECT-TYPE
+ SYNTAX OtdOptDeviceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "下行光发送机信息表目。"
+ INDEX { otdIndex }
+ ::= { otdOptDeviceTable 1 }
+
+ OtdOptDeviceEntry ::= SEQUENCE
+ {
+ otdIndex
+ INTEGER,
+ otdLaserWavelength
+ DisplayString,
+ otdLaserType
+ DisplayString,
+ otdDriveLevel
+ INTEGER,
+ otdInputRFLevel
+ INTEGER,
+ otdInputRFAttenuationRange
+ INTEGER,
+ otdInputRFAttenuation
+ INTEGER,
+ otdLaserTemp
+ INTEGER,
+ otdLaserCurrent
+ INTEGER,
+ otdOpicalOutputPower
+ INTEGER,
+ otdTecCurrent
+ INTEGER,
+ otdAGCControl
+ INTEGER,
+ otdConfigurationDriveLevel
+ INTEGER,
+ otdConfigurationRFAttenuation
+ INTEGER,
+ otdConfigurationRFChannels
+ INTEGER
+ }
+
+
+ otdIndex OBJECT-TYPE
+ SYNTAX INTEGER ( 0..32767 )
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "下行光发送机索引,可以是光发送机编号或机架插槽号。"
+ ::= { otdOptDeviceEntry 1 }
+
+ otdLaserWavelength OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "激光器波长。"
+ ::= { otdOptDeviceEntry 2 }
+
+ otdLaserType OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "激光器类型，有效值为unisolated FP, isolated FP, uncooled DFB, cooled DFB,ITU
+ 等。"
+ ::= { otdOptDeviceEntry 3 }
+
+ otdDriveLevel OBJECT-TYPE
+ SYNTAX INTEGER (0..127 )
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "光模块激励电平,单位为dBuV/ch。此对象要求在属性MIB中登记一个条目。"
+ ::= { otdOptDeviceEntry 4 }
+
+ otdInputRFLevel OBJECT-TYPE
+ SYNTAX INTEGER (0..127 )
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "输入射频信号电平,单位为dBuV/ch。此对象要求在属性MIB中登记一个条目。"
+ ::= { otdOptDeviceEntry 5 }
+
+ otdInputRFAttenuationRange OBJECT-TYPE
+ SYNTAX INTEGER ( 0..32767 )
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "输入射频信号衰减量范围,单位为0.1dB。"
+ ::= { otdOptDeviceEntry 6 }
+
+ otdInputRFAttenuation OBJECT-TYPE
+ SYNTAX INTEGER ( -32768..32767 )
+ ACCESS read-write
+ STATUS optional
+ DESCRIPTION
+ "输入射频信号衰减量,单位为0.1dB。"
+ ::= { otdOptDeviceEntry 7 }
+
+ otdLaserTemp OBJECT-TYPE
+ SYNTAX INTEGER ( -32768..32767 )
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "激光器工作温度,单位为0.1摄氏度。此对象要求在属性MIB中登记一个条目。"
+ ::= { otdOptDeviceEntry 8 }
+
+ otdLaserCurrent OBJECT-TYPE
+ SYNTAX INTEGER (-32768..32767 )
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "激光器工作电流,单位为0.1mA。此对象要求在属性MIB中登记一个条目。"
+ ::= { otdOptDeviceEntry 9 }
+
+ otdOpicalOutputPower OBJECT-TYPE
+ SYNTAX INTEGER ( 0..32767 )
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "输出光功率,单位为0.1mW。此对象要求在属性MIB中登记一个条目。"
+ ::= { otdOptDeviceEntry 10 }
+
+ otdTecCurrent OBJECT-TYPE
+ SYNTAX INTEGER ( -32768..32767 )
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "激光器制冷电流,单位为0.01A。此对象要求在属性MIB中登记一个条目。"
+ ::= { otdOptDeviceEntry 11 }
+
+ otdAGCControl OBJECT-TYPE
+ SYNTAX INTEGER {off(1),on(2)}
+ ACCESS read-write
+ STATUS optional
+ DESCRIPTION
+ "AGC控制使能。"
+ ::= { otdOptDeviceEntry 12 }
+
+ otdConfigurationDriveLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS optional
+ DESCRIPTION
+ "设定激光器RF驱动电平偏移量，单位为0.1dB。该参数仅在AGC模式为打开时起作用。
+ 系统根据该设定自动调整RF增益（衰减），从而达到设定的激光器RF驱动电平偏移量。
+ "
+ ::= { otdOptDeviceEntry 13 }
+
+ otdConfigurationRFAttenuation OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS optional
+ DESCRIPTION
+ "设定激光器RF驱动信号增益（衰减）的偏移量，单位为0.1dB。该参数仅在AGC模式为
+ 关闭时起作用（MGC）。系统根据该设定调整RF信道的增益（衰减），从而达到手动
+ 控制激光器RF驱动电平的目的。"
+ ::= { otdOptDeviceEntry 14 }
+
+ otdConfigurationRFChannels OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS optional
+ DESCRIPTION
+ "RF信号中输入的电视信号频道数。"
+ ::= { otdOptDeviceEntry 15 }
+
+ otdFansNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "表示内部散热风扇的数量，'0'表示设备不支持散热风扇的监测或没有散热风扇。"
+ ::= { otdIdent 4 }
+
+ otdFansTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OtdFansEntry
+ ACCESS not-accessible
+ STATUS optional
+ DESCRIPTION
+ "散热风扇信息表。"
+ ::= { otdIdent 5 }
+
+ otdFansEntry OBJECT-TYPE
+ SYNTAX OtdFansEntry
+ ACCESS not-accessible
+ STATUS optional
+ DESCRIPTION
+ "散热风扇信息表目。"
+ INDEX { otdFansIndex }
+ ::= { otdFansTable 1 }
+
+ OtdFansEntry ::= SEQUENCE {
+ otdFansIndex
+ INTEGER,
+ otdFansState
+ INTEGER,
+ otdFansSpeed
+ INTEGER,
+ otdFansControl
+ INTEGER,
+ otdFansName
+ DisplayString
+ }
+
+
+ otdFansIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "散热风扇信息表索引。"
+ ::= { otdFansEntry 1 }
+
+ otdFansState OBJECT-TYPE
+ SYNTAX INTEGER {normal (1), fault (2), off (3) }
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "散热风扇工作状态，normal 表示正常，fault表示失效，off表示关闭。此对象要求在离散属性MIB中登
+ 记一个条目。"
+ ::= { otdFansEntry 2 }
+
+ otdFansSpeed OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "散热风扇工作时的转速，单位为转/分，不支持转速检测时可置为'0'。此对象要求在
+ 离散属性MIB中登记一个条目。"
+ ::= { otdFansEntry 3 }
+
+ otdFansControl OBJECT-TYPE
+ SYNTAX INTEGER { on(1), off(2) }
+ ACCESS read-write
+ STATUS optional
+ DESCRIPTION
+ "散热风扇工作控制。 "
+ ::= { otdFansEntry 4 }
+
+ otdFansName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "散热风扇名称。"
+ ::= { otdFansEntry 5 }
+
+--*
+--* 直流电源
+--*
+ otdNumberDCPowerSupply OBJECT-TYPE
+ SYNTAX INTEGER ( 0..16 )
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "直流电源数量，'0'表示应答器不支持此功能。"
+ ::= { otdIdent 6 }
+
+ otdDCPowerSupplyMode OBJECT-TYPE
+ SYNTAX INTEGER { loadsharing(1), switchedredundant(2),alonesupply(3) }
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "供电电源工作模式。"
+ ::= { otdIdent 7 }
+
+ otdDCPowerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OtdDCPowerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "直流电源信息表。"
+ ::= { otdIdent 8 }
+
+ otdDCPowerEntry OBJECT-TYPE
+ SYNTAX OtdDCPowerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "直流电源信息表目。"
+ INDEX { otdDCPowerIndex }
+ ::= { otdDCPowerTable 1 }
+
+ OtdDCPowerEntry ::= SEQUENCE
+ {
+ otdDCPowerIndex
+ INTEGER,
+ otdDCPowerVoltage
+ INTEGER,
+ otdDCPowerCurrent
+ INTEGER,
+ otdDCPowerName
+ DisplayString
+ }
+
+ otdDCPowerIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "直流电源索引。"
+ ::= { otdDCPowerEntry 1 }
+
+ otdDCPowerVoltage OBJECT-TYPE
+ SYNTAX INTEGER (-32768..32767 )
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "电源电压，单位为0.1V。此对象要求在属性MIB中登记一个条目。"
+ ::= { otdDCPowerEntry 2 }
+
+ otdDCPowerCurrent OBJECT-TYPE
+ SYNTAX INTEGER ( 0..65535 )
+ ACCESS read-only
+ STATUS optional
+ DESCRIPTION
+ "电源电流，单位为0.1A。此对象要求在属性MIB中登记一个条目。"
+ ::= { otdDCPowerEntry 3 }
+
+ otdDCPowerName OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "标明电源的名称，例如：24V直流电源。
+ 此字段值由用户规定，至少应标明工作电压并将多个电源相互区分开。
+ 当表中的对象产生告警时，此对象名称应放进hfcAlarmEvent陷阱的alarmText对象里（见
+ 附录D）。"
+ ::= { otdDCPowerEntry 4 }
+
+-- *****************************************************************************
+END
\ No newline at end of file |