summaryrefslogtreecommitdiff
path: root/MIBS/ibm/BLADE-MIB
diff options
context:
space:
mode:
authorDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
committerDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
commit98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch)
tree9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/ibm/BLADE-MIB
downloadmibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz
mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip
Initial commitHEADmain
Diffstat (limited to 'MIBS/ibm/BLADE-MIB')
-rw-r--r--MIBS/ibm/BLADE-MIB35789
1 files changed, 35789 insertions, 0 deletions
diff --git a/MIBS/ibm/BLADE-MIB b/MIBS/ibm/BLADE-MIB
new file mode 100644
index 0000000..66d630b
--- /dev/null
+++ b/MIBS/ibm/BLADE-MIB
@@ -0,0 +1,35789 @@
+-- ********************************************************************************
+-- File : mmblade.mib
+-- Description : Management Module MIB for SNMP
+-- Version : 6.3
+-- Date : July 2013
+-- Copyright (c) 2002-2013 IBM All Rights Reserved.
+-- ********************************************************************************
+--
+-- Contains MIB description for:
+-- This MIB is to be used to provide configuration support and monitoring for the
+-- BladeCenter, BladeCenter T, BladeCenter H, and BladeCenter HT.
+-- ********************************************************************************
+BLADE-MIB DEFINITIONS ::= BEGIN
+
+
+ IMPORTS
+ OBJECT-TYPE FROM RFC-1212
+ enterprises FROM RFC1155-SMI
+ -- DisplayString FROM RFC1213-MIB
+ IpAddress FROM RFC1155-SMI
+ TRAP-TYPE FROM RFC-1215;
+ -- textual conventions
+
+ InetAddressIPv6 ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
+ STATUS current
+ DESCRIPTION
+ "Represents an IPv6 network address. Since MIB browsers
+ may require different formats, the address is
+ expected to be the 16 byte address in network-byte order,
+ and shortened formats such as 0::0 are not accepted in SET
+ operations. Two common examples are:
+
+ The NetSNMP command line will accept SET requests like:
+ snmpset -v1 -cprivate <host> s 2001:00:00:00:FFFF:CCC4:BBB2:AAA6
+
+ Other MIB browsers may require the SET request value to be formatted as:
+ # 0x20 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0xFF 0xCC 0xC4 0xBB 0xB2 0xAA 0xA6"
+ SYNTAX OCTET STRING (SIZE (16))
+
+ EntryStatus ::= INTEGER
+ { valid(1),
+ createRequest(2),
+ underCreation(3),
+ invalid(4)
+ }
+
+ -- The status of a table entry.
+ --
+ -- Setting this object to the value invalid(4) has the
+ -- effect of invalidating the corresponding entry.
+ -- That is, it effectively disassociates the mapping
+ -- identified with said entry.
+ -- It is an implementation-specific matter as to whether
+ -- the agent removes an invalidated entry from the table.
+ -- Accordingly, management stations must be prepared to
+ -- receive tabular information from agents that corresponds
+ -- to entries currently not in use. Proper
+ -- interpretation of such entries requires examination
+ -- of the relevant EntryStatus object.
+ --
+ -- An existing instance of this object cannot be set to
+ -- createRequest(2). This object may only be set to
+ -- createRequest(2) when this instance is created. When
+ -- this object is created, the agent may wish to create
+ -- supplemental object instances to complete a conceptual
+ -- row in this table. Immediately after completing the
+ -- create operation, the agent must set this object to
+ -- underCreation(3).
+ --
+ -- Entries shall exist in the underCreation(3) state until
+
+ -- the management station is finished configuring the
+ -- entry and sets this object to valid(1) or aborts,
+ -- setting this object to invalid(4). If the agent
+ -- determines that an entry has been in the
+ -- underCreation(3) state for an abnormally long time,
+ -- it may decide that the management station has
+ -- crashed. If the agent makes this decision,
+ -- it may set this object to invalid(4) to reclaim the
+ -- entry. A prudent agent will understand that the
+ -- management station may need to wait for human input
+ -- and will allow for that possibility in its
+ -- determination of this abnormally long period.
+
+ -- IBM enterprise group
+ ibm OBJECT IDENTIFIER ::= { enterprises 2 }
+
+ -- IBM products group
+ ibmAgents OBJECT IDENTIFIER ::= { ibm 3 }
+
+ -- IBM Advanced System Management Support Processor (SP) agent group
+ netfinitySupportProcessorAgent OBJECT IDENTIFIER ::= { ibmAgents 51 }
+
+ -- IBM BladeCenter Management Module (MM)
+ -- Also known as Advanced System Mangement (ASM) or Support Processor (SP)
+ bladeCenterSnmpMIB OBJECT IDENTIFIER ::= { netfinitySupportProcessorAgent 2 }
+
+-- ********************************************************************************
+-- Start: Define groups of objects within the bladeCenterSnmpMIB
+-- ********************************************************************************
+ -- This group of objects provides the various environmental monitors for the
+ -- local system and the MM
+ monitors OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 2 }
+
+ -- This group of objects provides the error log objects for the MM
+ errorLogs OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 3 }
+
+ -- This group of objects provides configuration functions for the MM
+ configureSP OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 4 }
+
+ -- This group of objects provides system management functions for BladeCenter T
+ telcoManagement OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 5 }
+
+ -- This group of objects provides configuration functions for system power
+-- systemPower OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 6 }
+
+ -- This group of objects provides functions to boot the MM and system
+ restartReset OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 7 }
+
+ -- This group of objects provides information specific to blades
+ blades OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 22 }
+
+ -- This group of objects provides information on the PCI-X expansion enclosure
+ -- pcixExpansionBox OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 21 }
+
+ -- This group of objects provides information specific to service
+ service OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 23 }
+
+ -- This group of objects provides information specific to scaling blades
+ scaling OBJECT IDENTIFIER ::= { bladeCenterSnmpMIB 24 }
+
+ -- ********************************************************************************
+ -- Temperature
+ -- ********************************************************************************
+ temperature OBJECT IDENTIFIER ::= { monitors 1 }
+
+ -- Planar Temperature
+ planarTemp OBJECT IDENTIFIER ::= { temperature 1 }
+
+ mmTemp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+ ::= { planarTemp 2 }
+
+
+ -- CPUx Temperature
+ -- cpuXTemp OBJECT IDENTIFIER ::= { temperature 2 }
+
+ -- System Ambient Temperature
+ ambientTemp OBJECT IDENTIFIER ::= { temperature 5 }
+
+ frontPanelTemp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The front panel temperature in degrees centigrade(C).
+ This is surrounding temperature where the system is installed.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+ ::= { ambientTemp 1 }
+
+ frontPanel2Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The front panel 2 temperature in degrees centigrade(C).
+ This is surrounding temperature where the system is installed.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ NOTE: This MIB object is for BladeCenter HT only"
+ ::= { ambientTemp 2 }
+
+
+ -- ********************************************************************************
+ -- Voltages
+ -- ********************************************************************************
+ voltage OBJECT IDENTIFIER ::= { monitors 2 }
+
+ -- Planar Voltages
+ planarVolt OBJECT IDENTIFIER ::= { voltage 1 }
+
+ plus5Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+5 Volt power supply voltage reading expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+ ::= { planarVolt 1 }
+
+ plus3Pt3Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+3.3 Volt power supply voltage reading expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+ ::= { planarVolt 2 }
+
+ plus12Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+12 Volt power supply voltage reading expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+ ::= { planarVolt 3 }
+
+ minus5Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "-5 Volt power supply voltage reading expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+ ::= { planarVolt 5 }
+
+ plus2Pt5Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+2.5 Volt power supply voltage reading expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+ ::= { planarVolt 6 }
+
+ plus1Pt8Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+1.8 Volt power supply voltage reading expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+ ::= { planarVolt 8 }
+
+ -- ********************************************************************************
+ -- Blowers
+ -- ********************************************************************************
+ blowers OBJECT IDENTIFIER ::= { monitors 3 }
+
+ blower1speed OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 1 speed expressed in percent(%) of maximum RPM.
+ An octet string expressed as 'ddd% of maximum' where:
+ d is a decimal digit or blank space for a leading zero.
+ If the blower is determined not to be running or
+ the blower speed cannot be determined, the string will
+ indicate 'Offline'.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 1 }
+
+ blower2speed OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 2 speed expressed in percent(%) of maximum RPM.
+ An octet string expressed as 'ddd% of maximum' where:
+ d is a decimal digit or blank space for a leading zero.
+ If the blower is determined not to be running or
+ the blower speed cannot be determined, the string will
+ indicate 'Offline'.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 2 }
+
+ blower3speed OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 3 speed expressed in percent(%) of maximum RPM.
+ An octet string expressed as 'ddd% of maximum' where:
+ d is a decimal digit or blank space for a leading zero.
+ If the blower is determined not to be running or
+ the blower speed cannot be determined, the string will
+ indicate 'Offline'.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+
+ NOTE: This MIB object is for BladeCenter T, BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 3 }
+
+ blower4speed OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 4 speed expressed in percent(%) of maximum RPM.
+ An octet string expressed as 'ddd% of maximum' where:
+ d is a decimal digit or blank space for a leading zero.
+ If the blower is determined not to be running or
+ the blower speed cannot be determined, the string will
+ indicate 'Offline'.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+
+ NOTE: This MIB object is for BladeCenter T, BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 4 }
+
+ blower1State OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ bad(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for blower 1.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 10}
+
+ blower2State OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ bad(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for blower 2.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 11}
+
+ blower3State OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ bad(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for blower 3.
+
+ NOTE: This MIB object is for BladeCenter T and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 12}
+
+ blower4State OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ bad(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for blower 4.
+
+ NOTE: This MIB object is for BladeCenter T and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 13}
+
+ blower1speedRPM OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 1 speed expressed in RPM.
+ If the blower is determined not to be running or
+ the blower speed cannot be determined, the string will
+ indicate 'Offline'.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+
+ NOTE: This MIB object is for AMM installed in BladeCenter H, BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 20 }
+
+ blower2speedRPM OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 2 speed expressed in RPM.
+ If the blower is determined not to be running or
+ the blower speed cannot be determined, the string will
+ indicate 'Offline'.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+
+ NOTE: This MIB object is for AMM installed in BladeCenter H, BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 21 }
+
+ blower3speedRPM OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 3 speed expressed in RPM.
+ If the blower is determined not to be running or
+ the blower speed cannot be determined, the string will
+ indicate 'Offline'.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+
+ NOTE: This MIB object is for AMM installed in BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 22 }
+
+ blower4speedRPM OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 4 speed expressed in RPM.
+ If the blower is determined not to be running or
+ the blower speed cannot be determined, the string will
+ indicate 'Offline'.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+
+ NOTE: This MIB object is for AMM installed in BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 23 }
+
+ blower1ControllerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ operational(0),
+ flashing(1),
+ notPresent(2),
+ communicationError(3),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the controller for blower 1.
+
+ NOTE: This MIB object is for AMM installed in BladeCenter H, BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 30}
+
+ blower2ControllerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ operational(0),
+ flashing(1),
+ notPresent(2),
+ communicationError(3),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the controller for blower 2.
+
+ NOTE: This MIB object is for AMM installed in BladeCenter H, BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 31}
+
+ blower3ControllerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ operational(0),
+ flashing(1),
+ notPresent(2),
+ communicationError(3),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the controller for blower 3.
+
+ NOTE: This MIB object is for AMM installed in BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 32}
+
+ blower4ControllerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ operational(0),
+ flashing(1),
+ notPresent(2),
+ communicationError(3),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the controller for blower 4.
+
+ NOTE: This MIB object is for AMM installed in BladeCenter HT and BladeCenter S only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 33}
+
+ blower1ExhaustTemp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The exhaust temperature in degrees Celsius for blower 1.
+
+ NOTE: This MIB object is for BCS only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 40}
+
+ blower2ExhaustTemp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The exhaust temperature in degrees Celsius for blower 2.
+
+ NOTE: This MIB object is for BCS only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 41}
+
+ blower3ExhaustTemp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The exhaust temperature in degrees Celsius for blower 3.
+
+ NOTE: This MIB object is for BCS only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 42}
+
+ blower4ExhaustTemp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The exhaust temperature in degrees Celsius for blower 4.
+
+ NOTE: This MIB object is for BCS only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowers 43}
+
+ -- ********************************************************************************
+ -- Power Module Health State
+ -- ********************************************************************************
+ powerModuleHealth OBJECT IDENTIFIER ::= { monitors 4 }
+
+ powerModuleHealthTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PowerModuleHealthEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of power module health information. Contains
+ the power health information for each power module."
+ ::= { powerModuleHealth 1 }
+
+ powerModuleHealthEntry OBJECT-TYPE
+ SYNTAX PowerModuleHealthEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Power Module health entry"
+ INDEX { powerModuleIndex }
+ ::= { powerModuleHealthTable 1 }
+
+
+ PowerModuleHealthEntry ::= SEQUENCE {
+ powerModuleIndex INTEGER,
+ powerModuleExists INTEGER,
+ powerModuleState INTEGER,
+ powerModuleDetails OCTET STRING
+ }
+
+ powerModuleIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module sequence index."
+ ::= { powerModuleHealthEntry 1 }
+
+ powerModuleExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the power module specified exists or not."
+ ::= { powerModuleHealthEntry 2 }
+
+ powerModuleState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ notAvailable(3),
+ critical(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the power module."
+ ::= { powerModuleHealthEntry 3}
+
+ powerModuleDetails OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The details for this power module."
+ ::= { powerModuleHealthEntry 4 }
+
+ -- ********************************************************************************
+ -- MM Status
+ -- ********************************************************************************
+ spStatus OBJECT IDENTIFIER ::= { monitors 5 }
+
+ mmBistAndChassisStatus OBJECT IDENTIFIER ::= { spStatus 2 }
+
+
+ bistSdram OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "MM BIST DRAM test result.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBistAndChassisStatus 1 }
+
+ bistRs485Port1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST RS 485 legacy test result."
+ ::= { mmBistAndChassisStatus 2 }
+
+ bistRs485Port2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST RS 485 local bus test result."
+ ::= { mmBistAndChassisStatus 3 }
+
+ bistNvram OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "MM BIST NVRAM test result.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBistAndChassisStatus 4 }
+
+ bistRtc OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST Real Time Clock test result."
+ ::= { mmBistAndChassisStatus 5 }
+
+ bistLocalI2CBus OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST Local I2C bus test result."
+ ::= { mmBistAndChassisStatus 7 }
+
+ bistPrimaryMainAppFlashImage OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST Primary Main Application Firmware test result."
+ ::= { mmBistAndChassisStatus 8 }
+
+ bistSecondaryMainAppFlashImage OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST Secondary Main Application test result."
+ ::= { mmBistAndChassisStatus 9 }
+
+ bistBootRomFlashImage OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST Boot Firmware test result."
+ ::= { mmBistAndChassisStatus 10 }
+
+ bistEthernetPort1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST external ethernet port test result."
+ ::= { mmBistAndChassisStatus 11 }
+
+ bistEthernetPort2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "MM BIST internal ethernet port test result.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBistAndChassisStatus 12 }
+
+ bistInternalPCIBus OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "MM BIST PCI bus test result.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBistAndChassisStatus 13 }
+
+ bistExternalI2CDevices OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST external I2C devices test result."
+ ::= { mmBistAndChassisStatus 14 }
+
+ bistUSBController OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "MM BIST USB controller test result.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBistAndChassisStatus 15 }
+
+ bistVideoCompressorBoard OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "MM BIST Video Compressor Board test result.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBistAndChassisStatus 16 }
+
+ bistRemoteVideo OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "MM BIST Remote Video test result.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBistAndChassisStatus 17 }
+
+ bistPrimaryBus OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST primary mid-plane bus test result."
+ ::= { mmBistAndChassisStatus 18 }
+
+ bistInternalEthernetSwitch OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST internal external switch test result."
+ ::= { mmBistAndChassisStatus 19 }
+
+ bistVideoCapture OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST video capture test result."
+ ::= { mmBistAndChassisStatus 20 }
+
+ bistUSBKeyboardMouseEmulation OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST USB keyboard and mouse test result."
+ ::= { mmBistAndChassisStatus 21 }
+
+ bistUSBMassStorageEmulation OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST mass storage emulation test result."
+ ::= { mmBistAndChassisStatus 22 }
+
+ bistUSBKeyboardMouseFirmware OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST USB keyboard and mouse firmware test result."
+ ::= { mmBistAndChassisStatus 23 }
+
+ bistUSBMassStorageFirmware OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST USB keyboard mouse firmware test result."
+ ::= { mmBistAndChassisStatus 24 }
+
+ bistPrimaryCore OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST primary core test result."
+ ::= { mmBistAndChassisStatus 25 }
+
+ bistSecondaryCore OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST secondary core test result."
+ ::= { mmBistAndChassisStatus 26 }
+
+ bistInternalIOExpander OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST internal IO expander test result."
+ ::= { mmBistAndChassisStatus 27 }
+
+ bistRemoteControlFirmware OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST Remote Control firmware test result."
+ ::= { mmBistAndChassisStatus 28 }
+
+ bistPhysicalNetworkLink OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST Physical Network Link test result."
+ ::= { mmBistAndChassisStatus 29 }
+
+ bistLogicalNetworkLink OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MM BIST Logical Network Link test result."
+ ::= { mmBistAndChassisStatus 30 }
+
+ bistBladesInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blades that are installed on the chassis.
+ The blades are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blades supported. If a blade is installed in a
+ bay, a 1 is present in the string in the position representing
+ the bay ID as read from left to right. For example, if blades
+ are installed in bays 1, 5, and 13, and 14 blades are supported,
+ the string would look like '10001000000010'."
+ ::= { mmBistAndChassisStatus 33 }
+
+ bistBladesCommunicating OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blades that are communicating on the chassis.
+ The blades are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blades supported. If a blade installed in a
+ bay is communicating, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if blades are communicating in bays 1, 5, and 13, and 14 blades
+ are supported, the string would look like '10001000000010'."
+ ::= { mmBistAndChassisStatus 49 }
+
+ bistBlowersInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blowers that are installed on the chassis.
+ The blowers are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blowers supported. If a blower is installed in a
+ bay, a 1 is present in the string in the position representing
+ the bay ID as read from left to right. For example, if a blower
+ is installed in bay 1, and 2 blowers are supported, the string
+ would look like '10'.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { mmBistAndChassisStatus 65 }
+
+ bistBlowersFunctional OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blowers installed on the chassis that are functional.
+ The blowers are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blowers supported. If a blower is installed and
+ functional in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if a blower is installed and functional only in bay 1, and 2 blowers
+ are supported, the string would look like '10'.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { mmBistAndChassisStatus 73 }
+
+ bistMediaTrayInstalled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a media tray is installed on the chassis."
+ ::= { mmBistAndChassisStatus 74 }
+
+ bistMediaTrayCommunicating OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a media tray is communicating."
+ ::= { mmBistAndChassisStatus 75 }
+
+ bistOtherMMInstalled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a redundant MM is installed."
+ ::= { mmBistAndChassisStatus 76 }
+
+ bistOtherMMCommunicating OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a redundant MM is communicating."
+ ::= { mmBistAndChassisStatus 77 }
+
+ bistPowerModulesInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power modules that are installed on the chassis.
+ The power modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of power modules supported. If a power module is
+ installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if power modules are installed in bays 1 and 3, and 4 power modules
+ are supported, the string would look like '1010'."
+ ::= { mmBistAndChassisStatus 81 }
+
+ bistPowerModulesFunctional OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power modules that are functional on the chassis.
+ The power modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of power modules supported. If a power module is
+ installed and functioning in a bay, a 1 is present in the string
+ in the position representing the bay ID as read from left to right.
+ For example, if power modules are installed and functioning in bays
+ 1 and 3, and 4 power modules are supported, the string would look
+ like '1010'."
+ ::= { mmBistAndChassisStatus 89 }
+
+ bistSwitchModulesInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch modules that are installed on the chassis.
+ The switch modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of switch modules supported. If a switch module is
+ installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if switch modules are installed in bays 1 and 3, and 4 switch modules
+ are supported, the string would look like '1011' for BladeCenter and
+ BladeCenter T and '1011000000' for BladeCenter H and BladeCenter HT."
+ ::= { mmBistAndChassisStatus 97 }
+
+ bistSwitchModulesCommunicating OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch modules that are communicating on the chassis.
+ The switch modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of switch modules supported. If a switch module is
+ installed and functioning in a bay, a 1 is present in the string
+ in the position representing the bay ID as read from left to right.
+ For example, if switch modules are installed and functioning in bays
+ 1 and 3, and 4 switch modules are supported, the string would look
+ like for BladeCenter and BladeCenter T and '1011000000' for
+ BladeCenter H and BladeCenter HT."
+ ::= { mmBistAndChassisStatus 113 }
+
+ bistLastUpdate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "It is the time when the primary MM updated the last BIST results."
+ ::= { mmBistAndChassisStatus 200 }
+
+ rmmBistAndChassisStatus OBJECT IDENTIFIER ::= { spStatus 3 }
+
+ rbistRs485Port1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST RS 485 legacy test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 2 }
+
+ rbistRs485Port2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST RS 485 local bus test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 3 }
+
+ rbistRtc OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST Real Time Clock test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 5 }
+
+ rbistLocalI2CBus OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST Local I2C bus test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 7 }
+
+ rbistPrimaryMainAppFlashImage OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST Primary Main Application Firmware test result.
+ The time of the last update can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 8 }
+
+ rbistSecondaryMainAppFlashImage OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST Secondary Main Application test result.
+ The time of the last update can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 9 }
+
+ rbistBootRomFlashImage OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST Boot Firmware test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 10 }
+
+ rbistEthernetPort1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST external ethernet port test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 11 }
+
+ rbistExternalI2CDevices OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST external I2C devices test result collected
+ when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 14 }
+
+ rbistInternalEthernetSwitch OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST internal external switch test result.
+ The time of the last update can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 19 }
+
+ rbistVideoCapture OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST video capture test result collected
+ when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 20 }
+
+ rbistUSBKeyboardMouseEmulation OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST USB keyboard and mouse test result collected
+ when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 21 }
+
+ rbistUSBMassStorageEmulation OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST mass storage emulation test result collected
+ when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 22 }
+
+ rbistUSBKeyboardMouseFirmware OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST USB keyboard and mouse firmware test result
+ collected when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 23 }
+
+ rbistUSBMassStorageFirmware OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST USB keyboard mouse firmware test result collected
+ when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 24 }
+
+ rbistPrimaryCore OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST primary core test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 25 }
+
+ rbistSecondaryCore OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST secondary core test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 26 }
+
+ rbistInternalIOExpander OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST internal IO expander test result. The time of the last update
+ can be obtained by querying rbistUpdateTime object."
+ ::= { rmmBistAndChassisStatus 27 }
+
+ rbistRemoteControlFirmware OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST Remote Control firmware test result collected
+ when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 28 }
+
+ rbistPhysicalNetworkLink OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST Physical Network Link test result collected
+ when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 29 }
+
+ rbistLogicalNetworkLink OBJECT-TYPE
+ SYNTAX INTEGER {
+ testSucceeded(0),
+ testFailed(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Standby MM BIST Logical Network Link test result collected
+ when the standby MM was primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 30 }
+
+ rbistBladesInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blades that were installed on the chassis when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object.
+ The blades are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blades supported. If a blade is installed in a
+ bay, a 1 is present in the string in the position representing
+ the bay ID as read from left to right. For example, if blades
+ are installed in bays 1, 5, and 13, and 14 blades are supported,
+ the string would look like '10001000000010'. "
+ ::= { rmmBistAndChassisStatus 33 }
+
+ rbistBladesCommunicating OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blades that were communicating on the chassis when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object.
+ The blades are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blades supported. If a blade installed in a
+ bay is communicating, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if blades are communicating in bays 1, 5, and 13, and 14 blades
+ are supported, the string would look like '10001000000010'."
+ ::= { rmmBistAndChassisStatus 49 }
+
+ rbistBlowersInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blowers that were installed on the chassis when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object.
+ The blowers are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blowers supported. If a blower is installed in a
+ bay, a 1 is present in the string in the position representing
+ the bay ID as read from left to right. For example, if a blower
+ is installed in bay 1, and 2 blowers are supported, the string
+ would look like '10'.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { rmmBistAndChassisStatus 65 }
+
+ rbistBlowersFunctional OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blowers installed on the chassis that were functional when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object.
+ The blowers are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blowers supported. If a blower is installed and
+ functional in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if a blower is installed and functional only in bay 1, and 2 blowers
+ are supported, the string would look like '10'.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { rmmBistAndChassisStatus 73 }
+
+ rbistMediaTrayInstalled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a media tray was installed on the chassis when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 74 }
+
+ rbistMediaTrayCommunicating OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a media tray was communicating when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 75 }
+
+ rbistOtherMMInstalled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a standby MM was installed when the
+ standby MM was once primary.The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object."
+ ::= { rmmBistAndChassisStatus 76 }
+
+ rbistOtherMMCommunicating OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether a standby MM was communicating when the
+ standby MM was once primary. The time of the last update can be
+ gotten from the object 'rbistUpdateTimePrimary'."
+ ::= { rmmBistAndChassisStatus 77 }
+
+ rbistPowerModulesInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power modules that were installed on the chassis when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object.
+ The power modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of power modules supported. If a power module was
+ installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if power modules were installed in bays 1 and 3, and 4 power modules
+ were supported, the string would look like '1010'."
+ ::= { rmmBistAndChassisStatus 81 }
+
+ rbistPowerModulesFunctional OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power modules that were functional on the chassis when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object.
+ The power modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of power modules supported. If a power module was
+ installed and functioning in a bay, a 1 is present in the string
+ in the position representing the bay ID as read from left to right.
+ For example, if power modules were installed and functioning in bays
+ 1 and 3, and 4 power modules were supported, the string would look
+ like '1010'."
+ ::= { rmmBistAndChassisStatus 89 }
+
+ rbistSwitchModulesInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch modules that were installed on the chassis when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object.
+ The switch modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of switch modules supported. If a switch module was
+ installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if switch modules were installed in bays 1 and 3, and 4 switch modules
+ were supported, the string would look like '1011' for BladeCenter and
+ BladeCenter T and '1011000000' for BladeCenter H and BladeCenter HT."
+ ::= { rmmBistAndChassisStatus 97 }
+
+ rbistSwitchModulesCommunicating OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch modules that are communicating on the chassis when the
+ standby MM was once primary. The time of the last update
+ can be obtained by querying rbistUpdateTimePrimary object.
+ The switch modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of switch modules supported. If a switch module was
+ installed and functioning in a bay, a 1 is present in the string
+ in the position representing the bay ID as read from left to right.
+ For example, if switch modules were installed and functioning in bays
+ 1 and 3, and 4 switch modules were supported, the string would look
+ like for BladeCenter and BladeCenter T and '1011000000' for
+ BladeCenter H and BladeCenter HT."
+ ::= { rmmBistAndChassisStatus 113 }
+
+ rbistUpdateTime OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "It is the time when the standby MM updated the last BIST results."
+ ::= { rmmBistAndChassisStatus 200 }
+
+ rbistLastUpdatePrimary OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "It is the time when the standby MM updated the last BIST results
+ when it was still primary."
+ ::= { rmmBistAndChassisStatus 201 }
+
+ -- ********************************************************************************
+ -- Fan Pack Health State
+ -- ********************************************************************************
+ fanPack OBJECT IDENTIFIER ::= { monitors 6 }
+
+ fanPackTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF FanPackEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of fan pack information. Contains
+ the information for each fan pack.
+
+ NOTE: Fan packs are also referred to as Power Module Cooling Devices."
+ ::= { fanPack 1 }
+
+ fanPackEntry OBJECT-TYPE
+ SYNTAX FanPackEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Fan Pack entry"
+ INDEX { fanPackIndex }
+ ::= { fanPackTable 1 }
+
+
+ FanPackEntry ::= SEQUENCE {
+ fanPackIndex INTEGER,
+ fanPackExists INTEGER,
+ fanPackState INTEGER,
+ fanPackFanCount INTEGER,
+ fanPackAverageSpeed OCTET STRING,
+ fanPackAverageSpeedRPM OCTET STRING,
+ fanPackControllerState INTEGER
+ }
+
+ fanPackIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fan Pack sequence index."
+ ::= { fanPackEntry 1 }
+
+ fanPackExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the fan pack specified exists or not."
+ ::= { fanPackEntry 2 }
+
+ fanPackState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ bad(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the fan pack.
+ 0 = unknown, 1 = good, 2 = warning, 3 = bad."
+ ::= { fanPackEntry 3}
+
+ fanPackFanCount OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of fans in the fan pack."
+ ::= { fanPackEntry 4 }
+
+ fanPackAverageSpeed OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The average speed of all fans in the fan pack expressed in percent(%)
+ of maximum RPM. If the fan pack is determined not to be running or
+ the fan pack speed cannot be determined, the string will
+ indicate 'Offline'. The string 'Not Readable!' indicates that the
+ given monitor is not supported on this system."
+ ::= { fanPackEntry 5 }
+
+ fanPackAverageSpeedRPM OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The average speed of all fans in the fan pack expressed in RPM.
+ If the fan pack is determined not to be running or the fan pack speed
+ cannot be determined, the string will indicate 'Offline'. The string
+ 'Not Readable!' indicates that the given monitor is not supported on
+ this system."
+ ::= { fanPackEntry 6 }
+
+ fanPackControllerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ operational(0),
+ flashing(1),
+ notPresent(2),
+ communicationError(3),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the controller for the fan pack.
+ 0 = operational, 1 = flashing in progress, 2 = not present, 3 = communication error,
+ 255 = unknown"
+ ::= { fanPackEntry 7}
+
+ -- ********************************************************************************
+ -- System Health
+ -- ********************************************************************************
+ systemHealth OBJECT IDENTIFIER ::= { monitors 7 }
+
+ -- ********************************************************************************
+ -- System Health Status
+ -- ********************************************************************************
+ systemHealthStat OBJECT-TYPE
+ SYNTAX INTEGER {
+ critical(0),
+ nonCritical(2),
+ systemLevel(4),
+ normal(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates status of system health for the
+ system in which the MM resides.
+ Value of 'critical' indicates a severe error has occurred
+ and the system may not be functioning. A value of
+ 'nonCritical' indicates that a error has occurred but
+ the system is currently functioning properly. A value of
+ 'systemLevel' indicates that a condition has occurred
+ that may change the state of the system in the future but currently
+ the system is working properly. A value of
+ 'normal' indicates that the system is operating normally."
+ ::= { systemHealth 1 }
+
+ -- ********************************************************************************
+ -- System Health Summary
+ -- ********************************************************************************
+ systemHealthSummaryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SystemHealthSummaryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of System Health summary. Contains more detailed
+ information about the reasons for the overall system
+ health status.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { systemHealth 2 }
+
+ systemHealthSummaryEntry OBJECT-TYPE
+ SYNTAX SystemHealthSummaryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "System Health Summary entry
+
+ NOTE: This MIB object is for BladeCenter only."
+ INDEX { systemHealthSummaryIndex }
+ ::= { systemHealthSummaryTable 1 }
+
+
+ SystemHealthSummaryEntry ::= SEQUENCE {
+ systemHealthSummaryIndex INTEGER,
+ systemHealthSummarySeverity OCTET STRING,
+ systemHealthSummaryDescription OCTET STRING,
+ systemHealthSummaryDateTime OCTET STRING
+ }
+
+
+ systemHealthSummaryIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System health summary index.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { systemHealthSummaryEntry 1 }
+
+ systemHealthSummarySeverity OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System health summary severity.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { systemHealthSummaryEntry 2 }
+
+ systemHealthSummaryDescription OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System health summary description.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { systemHealthSummaryEntry 3 }
+
+ systemHealthSummaryDateTime OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System health summary date time.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { systemHealthSummaryEntry 4 }
+
+ -- ********************************************************************************
+ -- LEDs
+ -- ********************************************************************************
+ leds OBJECT IDENTIFIER ::= { monitors 8 }
+
+ -- ********************************************************************************
+ -- Front Panel LEDs
+ -- ********************************************************************************
+ frontPanelLEDs OBJECT IDENTIFIER ::= { leds 1 }
+
+
+ systemErrorLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the front panel system error LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { frontPanelLEDs 1 }
+
+
+ informationLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the front panel system information LED
+ is on or off. For Write access, the LED can be turned off
+ only.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { frontPanelLEDs 2 }
+
+
+ temperatureLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the front panel temperature LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { frontPanelLEDs 3 }
+
+
+ identityLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ blinking(2),
+ notAvailable(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the front panel identity LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { frontPanelLEDs 4 }
+
+
+ -- ********************************************************************************
+ -- Blade LEDs
+ -- ********************************************************************************
+ bladeLEDs OBJECT IDENTIFIER ::= { leds 2 }
+
+ bladeLEDsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade status information.
+
+ NOTE: Querying objects in this table may take significantly longer
+ than normal, so it is recommended that the query timeout be set to
+ a large value. On a fully populated chassis, the timeout should be set
+ to 120 seconds or more."
+ ::= { bladeLEDs 1 }
+
+ bladeLEDsEntry OBJECT-TYPE
+ SYNTAX BladeLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade system status entry"
+ INDEX { bladeStatusIndex }
+ ::= { bladeLEDsTable 1 }
+
+
+ BladeLEDsEntry ::= SEQUENCE {
+ ledBladeIndex INTEGER,
+ ledBladeId INTEGER,
+ ledBladeExists INTEGER,
+ ledBladePowerState INTEGER,
+ ledBladeHealthState INTEGER,
+ ledBladeName OCTET STRING,
+ ledBladeSystemError INTEGER,
+ ledBladeInformation INTEGER,
+ ledBladeKVM INTEGER,
+ ledBladeMediaTray INTEGER,
+ ledBladeIdentity INTEGER
+ }
+
+
+ ledBladeIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade LED table index."
+ ::= { bladeLEDsEntry 1 }
+
+ ledBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeLEDsEntry 2 }
+
+ ledBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeLEDsEntry 3 }
+
+ ledBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeLEDsEntry 4 }
+
+ ledBladeHealthState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ critical(3),
+ kernelMode(4),
+ discovering(5),
+ commError(6),
+ noPower(7),
+ flashing(8),
+ initFailure(9),
+ insufficientPower(10),
+ powerDenied(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The system health state for the blade.
+
+ Unknown: Blade is in an undefined state.
+ Good: Blade is operating normally.
+ Warning: One or more outstanding warnings exist for this blade.
+ Critical: One or more outstanding critical events for this blade.
+ Kernel Mode: Blade is in kernel mode.
+ Discovering: The AMM is currently in the process of discovering this blade.
+ Communications Error: The AMM failed to communicate with this blade.
+ No Power: No power to the blade's domain.
+ Flashing: Flashing in progress.
+ Initialization Failure: Blade failed to initialized.
+ Insufficient Power: Not enough power is left in the blade's domain to power the blade.
+ Power Denied: Power was denied to the blade."
+ ::= { bladeLEDsEntry 5 }
+
+ ledBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeLEDsEntry 6 }
+
+ ledBladeSystemError OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade system error LED is on or off."
+ ::= { bladeLEDsEntry 7 }
+
+ ledBladeInformation OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade information LED is on or off.
+ For Write access, the LED can be turned off only."
+ ::= { bladeLEDsEntry 8 }
+
+ ledBladeKVM OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ blinking(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade KVM LED is on, off, or blinking."
+ ::= { bladeLEDsEntry 9 }
+
+ ledBladeMediaTray OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ blinking(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade media tray LED is on, off, or blinking."
+ ::= { bladeLEDsEntry 10 }
+
+ ledBladeIdentity OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ blinking(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade identify LED is on, off, or blinking."
+ ::= { bladeLEDsEntry 11 }
+
+ bladeLEDsDetailsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeLEDsDetailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade LEDs detailed information.
+
+ NOTE: Querying objects in this table may take significantly longer
+ than normal, so it is recommended that the query timeout be set to
+ a large value. On a fully populated chassis, the timeout should be set
+ to 120 seconds or more."
+ ::= { bladeLEDs 2 }
+
+ bladeLEDsDetailsEntry OBJECT-TYPE
+ SYNTAX BladeLEDsDetailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade LEDs Details entry"
+ INDEX { ledIndex }
+ ::= { bladeLEDsDetailsTable 1 }
+
+ BladeLEDsDetailsEntry ::= SEQUENCE {
+ ledIndex INTEGER,
+ ledBladeBayNumber OCTET STRING,
+ ledBladeComponentType OCTET STRING,
+ ledBladeLabel OCTET STRING,
+ ledBladeState INTEGER,
+ ledBladeLocation OCTET STRING
+ }
+
+ ledIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The LED index number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeLEDsDetailsEntry 1 }
+
+ ledBladeBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The bay number of the main server blade that the LED is grouped into.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeLEDsDetailsEntry 2 }
+
+ ledBladeComponentType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Type of the component/subcomponent grouping for this LED.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeLEDsDetailsEntry 3 }
+
+ ledBladeLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Text label for a LED.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeLEDsDetailsEntry 4 }
+
+ ledBladeState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ blinking(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Text description which denotes color or on/off/blink state for a LED.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeLEDsDetailsEntry 5 }
+
+ ledBladeLocation OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Location of this LED.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeLEDsDetailsEntry 6 }
+
+ -- ***********************************************************************
+ -- BladeCenter T Panel LEDs
+ -- ***********************************************************************
+ telcoPanelLEDs OBJECT IDENTIFIER ::= { leds 3 }
+
+
+ criticalLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the BladeCenter T Panel CRT (Critical) LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoPanelLEDs 1 }
+
+
+ majorLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the BladeCenter T Panel MJR (Major) LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoPanelLEDs 2 }
+
+ minorLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the BladeCenter T Panel MNR (Minor) LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoPanelLEDs 3 }
+
+
+ telcoIdentityLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ blinking(2),
+ notAvailable(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the BladeCenter T Panel identity LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoPanelLEDs 4 }
+
+
+ telcoColorSel OBJECT-TYPE
+ SYNTAX INTEGER {
+ amber(0),
+ red(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the BladeCenter T Critical and Major LEDs are displayed in amber or red color.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoPanelLEDs 5 }
+
+
+
+ criticalityAssertionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the BladeCenter T Criticality Assertion Mode is enabled or disabled.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoPanelLEDs 6 }
+
+
+
+ -- ********************************************************************************
+ -- Switch Module LEDs
+ -- ********************************************************************************
+ smLEDs OBJECT IDENTIFIER ::= { leds 4 }
+
+ smLEDsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SMLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of switch module LEDs information."
+ ::= { smLEDs 1 }
+
+ smLEDsEntry OBJECT-TYPE
+ SYNTAX SMLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module LEDs information entry"
+ INDEX { ledSMIndex }
+ ::= { smLEDsTable 1 }
+
+
+ SMLEDsEntry ::= SEQUENCE {
+ ledSMIndex INTEGER,
+ ledSMLEDs OCTET STRING
+ }
+
+
+ ledSMIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module LEDs table index. "
+ ::= { smLEDsEntry 1 }
+
+ ledSMLEDs OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(256))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A bitmap of LEDs information on the selected switch module. The
+ bitmap is a string containing a list of 1's and 0's. Every 4 bytes
+ are used to represent a led state. The first 64 bytes represent the
+ status of the external LEDs while the last 64 bytes represent the
+ status of the internal port connections from the switch module to
+ blades. Each nibble of data is presented in the bitmap format (0000)
+ and is encoded as followed
+ - 0000: LED is not present
+ - 0001: LED is off
+ - 0010: LED is on
+
+ NOTE: The data is read from left to right, starting out with blade
+ server 1 and so on."
+ ::= { smLEDsEntry 2 }
+
+ -- ********************************************************************************
+ -- Blower LEDs
+ -- ********************************************************************************
+ blowerLEDs OBJECT IDENTIFIER ::= { leds 5 }
+
+ blowerLEDsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BlowerLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blower LEDs information.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowerLEDs 1 }
+
+ blowerLEDsEntry OBJECT-TYPE
+ SYNTAX BlowerLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blower LEDs information entry"
+ INDEX { ledBlowerIndex }
+ ::= { blowerLEDsTable 1 }
+
+
+ BlowerLEDsEntry ::= SEQUENCE {
+ ledBlowerIndex INTEGER,
+ ledBlowerId INTEGER,
+ ledBlowerExists INTEGER,
+ ledBlowerError INTEGER
+ }
+
+ ledBlowerIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower LEDs table index. "
+ ::= { blowerLEDsEntry 1 }
+
+ ledBlowerId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blower1(1),
+ blower2(2),
+ blower3(3),
+ blower4(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { blowerLEDsEntry 2 }
+
+ ledBlowerExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blower specified exists or not."
+ ::= { blowerLEDsEntry 3 }
+
+ ledBlowerError OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ notAvailable(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blower error LED is on, off, or not available."
+ ::= { blowerLEDsEntry 4 }
+
+ -- ********************************************************************************
+ -- Fan Pack LEDs
+ -- ********************************************************************************
+ fanPackLEDs OBJECT IDENTIFIER ::= { leds 6 }
+
+ fanPackLEDsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF FanPackLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of fan pack LEDs information.
+
+ NOTE: Fan packs are also referred to as Power Module Cooling Devices."
+ ::= { fanPackLEDs 1 }
+
+ fanPackLEDsEntry OBJECT-TYPE
+ SYNTAX FanPackLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Fan Pack LEDs information entry"
+ INDEX { ledFanPackIndex }
+ ::= { fanPackLEDsTable 1 }
+
+
+ FanPackLEDsEntry ::= SEQUENCE {
+ ledFanPackIndex INTEGER,
+ ledFanPackId INTEGER,
+ ledFanPackExists INTEGER,
+ ledFanPackError INTEGER
+ }
+
+
+ ledFanPackIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fan Pack LEDs table index. "
+ ::= { fanPackLEDsEntry 1 }
+
+ ledFanPackId OBJECT-TYPE
+ SYNTAX INTEGER {
+ fanPack1(1),
+ fanPack2(2),
+ fanPack3(3),
+ fanPack4(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric fan pack ID."
+ ::= { fanPackLEDsEntry 2 }
+
+ ledFanPackExists OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the fan pack specified exists or not."
+ ::= { fanPackLEDsEntry 3 }
+
+ ledFanPackError OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the fan pack error LED is on or off."
+ ::= { fanPackLEDsEntry 4 }
+
+ -- ********************************************************************************
+ -- BCHT ONLY - Hardware Component Status LEDs
+ -- ********************************************************************************
+ -- Media Tray Status LEDs
+ -- ********************************************************************************
+ mtStatusLEDs OBJECT IDENTIFIER ::= { leds 7 }
+
+ mtStatusLEDsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MtStatusLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Media Tray Status LEDs information.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mtStatusLEDs 1 }
+
+ mtStatusLEDsEntry OBJECT-TYPE
+ SYNTAX MtStatusLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray Status LEDs information entry.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ INDEX { ledMediaTrayIndex }
+ ::= { mtStatusLEDsTable 1 }
+
+
+ MtStatusLEDsEntry ::= SEQUENCE {
+ ledMediaTrayIndex INTEGER,
+ ledMediaTrayId INTEGER,
+ ledMediaTrayExists INTEGER,
+ ledMediaTrayFault INTEGER
+ }
+
+
+ ledMediaTrayIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray Status LEDs table index.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mtStatusLEDsEntry 1 }
+
+
+ ledMediaTrayId OBJECT-TYPE
+ SYNTAX INTEGER {
+ topmediatray(1),
+ botmediatray(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric Media Tray ID.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mtStatusLEDsEntry 2 }
+
+ ledMediaTrayExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the Media Tray exists or not.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mtStatusLEDsEntry 3 }
+
+ ledMediaTrayFault OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the Media Tray Fault LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mtStatusLEDsEntry 5 }
+
+ -- ********************************************************************************
+ -- Telco Alarm Panel Tray Status LEDs
+ -- ********************************************************************************
+ tapStatusLEDs OBJECT IDENTIFIER ::= { leds 8 }
+
+ tapExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the Alarm Panel exists or not.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapStatusLEDs 3 }
+
+ tapFRRLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the Alarm Panel Safe To Remove LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapStatusLEDs 4 }
+
+
+ tapFaultLED OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the Alarm Panel Fault LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapStatusLEDs 5 }
+
+
+ -- ********************************************************************************
+ -- Network Clock Status LEDs
+ -- ********************************************************************************
+ ncStatusLEDs OBJECT IDENTIFIER ::= { leds 9 }
+
+ ncStatusLEDsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NcStatusLEDsEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Table of Network Clock Status LEDs information.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncStatusLEDs 1 }
+
+ ncStatusLEDsEntry OBJECT-TYPE
+ SYNTAX NcStatusLEDsEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock Status LEDs information entry.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ INDEX { ledNetworkClockIndex }
+ ::= { ncStatusLEDsTable 1 }
+
+
+ NcStatusLEDsEntry ::= SEQUENCE {
+ ledNetworkClockIndex INTEGER,
+ ledNetworkClockId INTEGER,
+ ledNetworkClockExists INTEGER,
+ ledNetworkClockFRR INTEGER,
+ ledNetworkClockFault INTEGER
+ }
+
+
+ ledNetworkClockIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock Status LEDs table index.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncStatusLEDsEntry 1 }
+
+
+ ledNetworkClockId OBJECT-TYPE
+ SYNTAX INTEGER {
+ networkclock1(1),
+ networkclock2(2)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The numeric Network Clock ID.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncStatusLEDsEntry 2 }
+
+ ledNetworkClockExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates whether the Network Clock exists or not.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncStatusLEDsEntry 3 }
+
+ ledNetworkClockFRR OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates whether the Network Clock Safe To Remove LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncStatusLEDsEntry 4 }
+
+ ledNetworkClockFault OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates whether the Network Clock Fault LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncStatusLEDsEntry 5 }
+
+
+ -- ********************************************************************************
+ -- Multiplexer Expansion Module Status LEDs
+ -- ********************************************************************************
+ mxStatusLEDs OBJECT IDENTIFIER ::= { leds 10 }
+
+ mxStatusLEDsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxStatusLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Multiplexer Expansion Module Status LEDs information.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxStatusLEDs 1 }
+
+ mxStatusLEDsEntry OBJECT-TYPE
+ SYNTAX MxStatusLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module Status LEDs information entry.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ INDEX { ledMuxIndex }
+ ::= { mxStatusLEDsTable 1 }
+
+
+ MxStatusLEDsEntry ::= SEQUENCE {
+ ledMuxIndex INTEGER,
+ ledMuxId INTEGER,
+ ledMuxExists INTEGER,
+ ledMuxFRR INTEGER,
+ ledMuxFault INTEGER
+ }
+
+
+ ledMuxIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module Status LEDs table index.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxStatusLEDsEntry 1 }
+
+
+ ledMuxId OBJECT-TYPE
+ SYNTAX INTEGER {
+ mux1(1),
+ mux2(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric Multiplexer Expansion Module ID.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxStatusLEDsEntry 2 }
+
+ ledMuxExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the Multiplexer Expansion Module exists or not.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxStatusLEDsEntry 3 }
+
+ ledMuxFRR OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the Multiplexer Expansion Module Safe To Remove LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxStatusLEDsEntry 4 }
+
+ ledMuxFault OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the Multiplexer Expansion Module Fault LED is on or off.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxStatusLEDsEntry 5 }
+
+
+ -- ********************************************************************************
+ -- Storage LEDs
+ -- ********************************************************************************
+ storageLEDs OBJECT IDENTIFIER ::= { leds 11 }
+
+ storageLEDsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StorageLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of storage module LEDs information.
+
+ NOTE: This MIB object is for BladeCenter S only."
+ ::= { storageLEDs 1 }
+
+ storageLEDsEntry OBJECT-TYPE
+ SYNTAX StorageLEDsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module LEDs information entry
+
+ NOTE: This MIB object is for BladeCenter S only."
+ INDEX { ledStorageIndex }
+ ::= { storageLEDsTable 1 }
+
+
+ StorageLEDsEntry ::= SEQUENCE {
+ ledStorageIndex INTEGER,
+ ledStorageId INTEGER,
+ ledStorageExists INTEGER,
+ ledStorageError INTEGER
+ }
+
+
+ ledStorageIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module LEDs table index.
+
+ NOTE: This MIB object is for BladeCenter S only."
+ ::= { storageLEDsEntry 1 }
+
+ ledStorageId OBJECT-TYPE
+ SYNTAX INTEGER {
+ storage1(1),
+ storage2(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric storage module ID.
+
+ NOTE: This MIB object is for BladeCenter S only."
+ ::= { storageLEDsEntry 2 }
+
+ ledStorageExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the storage module specified exists or not.
+
+ NOTE: This MIB object is for BladeCenter S only."
+ ::= { storageLEDsEntry 3 }
+
+ ledStorageError OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ blinking(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the status of the storage module error LED.
+
+ NOTE: This MIB object is for BladeCenter S only."
+ ::= { storageLEDsEntry 4 }
+
+ -- ************************************************************************
+ -- BladeCenter T System Health
+ -- ************************************************************************
+ telcoSystemHealth OBJECT IDENTIFIER ::= { monitors 9 }
+
+ -- ************************************************************************
+ -- BladeCenter T System Health Status
+ -- ************************************************************************
+ telcoSystemHealthStat OBJECT-TYPE
+ SYNTAX INTEGER {
+ critical-power(6),
+ critical(5),
+ major-power(4),
+ major(3),
+ minor-power(2),
+ minor(1),
+ normal(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates status of system health for the system in which the
+ MM resides. Value of 'critical' indicates a non-recoverable
+ service affecting condition has occurred that requires an
+ immediate action. A value of 'major' indicates a critical
+ service affecting condition has occurred that requires an urgent
+ action. A value of 'minor' indicates a non-service affecting
+ condition has occurred. Corrective action should be taken in
+ order to prevent a more serious fault. A value of 'normal'
+ indicates that the system is operating normally. Severity level
+ with '-power' indicates the failure relates to the power resource.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoSystemHealth 1 }
+
+ -- ************************************************************************
+ -- BladeCenter T System Health Summary
+ -- ************************************************************************
+ telcoSystemHealthSummaryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TelcoSystemHealthSummaryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of System Health summary. Contains more detailed
+ information about the reasons for the overall system
+ health status.
+
+ NOTE: This MIB object is for BladeCenter T only.
+ NOTE: This table may contain one entry if no alarms are in progress. That one entry,
+ if present, contains no alarms but a message of 'Good' in the severity object."
+ ::= { telcoSystemHealth 2 }
+
+ telcoSystemHealthSummaryEntry OBJECT-TYPE
+ SYNTAX TelcoSystemHealthSummaryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "BladeCenter T System Health Summary entry.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ INDEX { telcoSystemHealthSummaryIndex }
+ ::= { telcoSystemHealthSummaryTable 1 }
+
+
+ TelcoSystemHealthSummaryEntry ::= SEQUENCE {
+ telcoSystemHealthSummaryIndex INTEGER,
+ telcoSystemHealthSummarySeverity OCTET STRING,
+ telcoSystemHealthSummaryDescription OCTET STRING,
+ telcoSystemHealthSummaryEventName INTEGER,
+ telcoSystemHealthSummaryEventKeyID OCTET STRING,
+ telcoSystemHealthSummaryAcknowledge INTEGER,
+ telcoSystemHealthSummaryAssertTime OCTET STRING
+ }
+
+
+ telcoSystemHealthSummaryIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "BladeCenter T System Health Summary Index.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoSystemHealthSummaryEntry 1 }
+
+ telcoSystemHealthSummarySeverity OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "BladeCenter T System Health Summary Severity. The values
+ and meanings are as follows:
+ 0x06 Critical-Power
+ 0x05 Critical
+ 0x04 Major-Power
+ 0x03 Major
+ 0x02 Minor-Power
+ 0x01 Minor
+ 0xFF Normal
+
+ NOTE: This MIB object is for BladeCenter T only.
+ NOTE: If no alarms are in progress, this object contains 'Good'."
+ ::= { telcoSystemHealthSummaryEntry 2 }
+
+ telcoSystemHealthSummaryDescription OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "BladeCenter T System Health Summary Description.
+
+ NOTE: This MIB object is for BladeCenter T only.
+ NOTE: If no alarms are in progress, this object contains 'No alarm events'."
+ ::= { telcoSystemHealthSummaryEntry 3 }
+
+ telcoSystemHealthSummaryEventName OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "BladeCenter T System Health Summary Event Name.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoSystemHealthSummaryEntry 4 }
+
+ telcoSystemHealthSummaryEventKeyID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "BladeCenter T System Health Summary Event Key ID. An octet string
+ expressed as 'mmm:ggg:iii:aaa:sss' where:
+ m : Module ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ g : Gen ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ i : GenInfo ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ a : Alarm ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ s : Alarm severity value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+
+
+ NOTE: This MIB object is for BladeCenter T only.
+ NOTE: If no alarms are in progress, this object contains 'No alarm events'."
+ ::= { telcoSystemHealthSummaryEntry 5 }
+
+ telcoSystemHealthSummaryAcknowledge OBJECT-TYPE
+ SYNTAX INTEGER {
+ unacknowledged(0),
+ acknowledged(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "BladeCenter T System Health Summary Acknowledge. Indicates whether the
+ alarm event is acknowledged or unacknowledged.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoSystemHealthSummaryEntry 6 }
+
+ telcoSystemHealthSummaryAssertTime OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "BladeCenter T System Health Summary Assert Time.
+
+ NOTE: This MIB object is for BladeCenter T only.
+ NOTE: If no alarms are in progress, this object contains 'No alarm events'."
+ ::= { telcoSystemHealthSummaryEntry 7 }
+
+
+
+
+ -- ********************************************************************************
+ -- Fuel Gauge / Power Management
+ -- ********************************************************************************
+ fuelGauge OBJECT IDENTIFIER ::= { monitors 10 }
+
+ -- ********************************************************************************
+ -- Fuel Gauge
+ -- ********************************************************************************
+ fuelGaugeInformation OBJECT IDENTIFIER ::= { fuelGauge 1 }
+
+ fuelGaugeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF FuelGaugeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Fuel Gauge information."
+ ::= { fuelGaugeInformation 1 }
+
+ fuelGaugeEntry OBJECT-TYPE
+ SYNTAX FuelGaugeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge entry"
+ INDEX { fuelGaugeIndex }
+ ::= { fuelGaugeTable 1 }
+
+ FuelGaugeEntry ::= SEQUENCE {
+ fuelGaugeIndex INTEGER,
+ fuelGaugePowerDomainNumber INTEGER,
+ fuelGaugeStatus OCTET STRING,
+ fuelGaugeFirstPowerModule OCTET STRING,
+ fuelGaugeSecondPowerModule OCTET STRING,
+ fuelGaugePowerManagementPolicySetting INTEGER,
+ fuelGaugeTotalPower OCTET STRING,
+ fuelGaugeAllocatedPower OCTET STRING,
+ fuelGaugeRemainingPower OCTET STRING,
+ fuelGaugePowerInUsed OCTET STRING
+ }
+
+ fuelGaugeIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge Table Index."
+ ::= { fuelGaugeEntry 1 }
+
+ fuelGaugePowerDomainNumber OBJECT-TYPE
+ SYNTAX INTEGER {
+ powerDomain1(1),
+ powerDomain2(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge Table Power Domain Number."
+ ::= { fuelGaugeEntry 2 }
+
+ fuelGaugeStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge Table Status for the power domain.
+ The response will start out with a numeric value (0 = unknown,
+ 1 = good, 2 = warning, and 3: bad), followed by a text message."
+ ::= { fuelGaugeEntry 3 }
+
+ fuelGaugeFirstPowerModule OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge Table First Power Module capacity in Watts in the power domain.
+
+ NOTE: First power module in power domain 1 and 2 is in bay 1
+ and 3 respectively."
+ ::= { fuelGaugeEntry 4 }
+
+ fuelGaugeSecondPowerModule OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge Table Second Power Module capacity in Watts in the power domain.
+
+ NOTE: Second power module in power domain 1 and 2 is in bay 2
+ and 4 respectively."
+ ::= { fuelGaugeEntry 5 }
+
+ fuelGaugePowerManagementPolicySetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ redundantWithoutPerformanceImpact(0),
+ redundantWithPerformanceImpact(1),
+ nonRedundant(2),
+ redundantACPowerSource(3),
+ acPowerSourceWithBladeThrottlingAllowed(4),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge Table for the Power Management Policy Setting for each power domain.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ A new powerPolicyTable has been added which provides more detailed
+ information regarding a domains power policy information. This table
+ also has the capability to SET the power policy for a given domain.
+
+ In addition, note that the first three enumerated choices above are
+ referred to with updated nomenclature, as follows:
+
+ redundantWithoutPerformanceImpact(0) equals Redundant Power Modules
+ redundantWithPerformanceImpact(1) equals Power Modules with Blade
+ Throttling Allowed
+ nonRedundant(2) equals Basic Power Management"
+ ::= { fuelGaugeEntry 6 }
+
+ fuelGaugeTotalPower OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This field displays the total available power for each power domain based on
+ installed power modules and the current Power Management Policy Setting.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored."
+ ::= { fuelGaugeEntry 7 }
+
+ fuelGaugeAllocatedPower OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This field displays the power that has been reserved in each power domain.
+ NOTE: 1) Power is always reserved in domain 1 for two management modules and
+ two I/O modules. 2) Power is reserved for I/O modules installed in bay 3 and
+ 4 (Powered on or standby). 3) Power is reserved for each installed Blade.
+ Blades in a standby state (not powered on) will reserve a certain amount power.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored."
+ ::= { fuelGaugeEntry 8 }
+
+ fuelGaugeRemainingPower OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This field displays the remaining power available in each domain.
+ Remaining Power = Total Power minus Power In Use
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored."
+ ::= { fuelGaugeEntry 9 }
+
+ fuelGaugePowerInUsed OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This field displays the total power being used in each power domain.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored."
+ ::= { fuelGaugeEntry 10 }
+
+ -- ********************************************************************************
+ -- Fuel Gauge Power Domain 1
+ -- ********************************************************************************
+ powerDomain1 OBJECT IDENTIFIER ::= { fuelGauge 2 }
+
+ powerDomain1Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF PowerDomain1Entry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Power Domain 1.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices.
+ NOTE: Fan packs are also referred to as Power Module Cooling Devices."
+ ::= { powerDomain1 1}
+
+ powerDomain1Entry OBJECT-TYPE
+ SYNTAX PowerDomain1Entry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge entry"
+ INDEX { pd1Index }
+ ::= { powerDomain1Table 1 }
+
+
+ PowerDomain1Entry ::= SEQUENCE {
+ pd1Index INTEGER,
+ pd1BayNumber OCTET STRING,
+ pd1BladePrimarySlot INTEGER,
+ pd1ModuleStatus INTEGER,
+ pd1ModuleName OCTET STRING,
+ pd1ModuleState INTEGER,
+ pd1ModuleAllocatedPowerCurrent OCTET STRING,
+ pd1ModuleAllocatedPowerMax OCTET STRING,
+ pd1ModuleAllocatedPowerMin OCTET STRING,
+ pd1ModuleCPUDutyCycles OCTET STRING,
+ pd1ModuleThrottle INTEGER,
+ pd1ModulePowerCapabilities INTEGER,
+ pd1ModuleMeasuredOrStatic INTEGER
+ }
+
+ pd1Index OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Index."
+ ::= { powerDomain1Entry 1 }
+
+ pd1BayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Bay Number.
+ The following Bay Number IDs are used in the BladeCenter:
+ notApplicable(1),
+ notApplicable(2),
+ blowerBay1(3),
+ blowerBay2(4),
+ managementModuleBay1(5),
+ managementModuleBay2(6),
+ switchModuleBay1(7),
+ switchModuleBay2(8),
+ switchModuleBay3(9),
+ switchModuleBay4(10),
+ serverBladeBay1(11),
+ serverBladeBay2(12),
+ serverBladeBay3(13),
+ serverBladeBay4(14),
+ serverBladeBay5(15),
+ serverBladeBay6(16),
+ notApplicable(17)
+ The following Bay Number IDs are used in the BladeCenter H:
+ notApplicable(1),
+ notApplicable(2),
+ fanPackBay1(3),
+ fanPackBay2(4),
+ fanPackBay3(5),
+ fanPackBay4(6),
+ managementModuleBay1(7),
+ managementModuleBay2(8),
+ ioModuleBay1(9),
+ ioModuleBay2(10),
+ ioModuleBay3(11),
+ ioModuleBay4(12),
+ ioModuleBay7(13),
+ ioModuleBay8(14),
+ ioModuleBay9(15),
+ ioModuleBay10(16),
+ serverBladeBay1(17),
+ serverBladeBay2(18),
+ serverBladeBay3(19),
+ serverBladeBay4(20),
+ serverBladeBay5(21),
+ serverBladeBay6(22),
+ serverBladeBay7(23),
+ notApplicable(24)
+ The following Bay Number IDs are used in the BladeCenter T:
+ notApplicable(1),
+ notApplicable(2),
+ blowerBay1(3),
+ blowerBay2(4),
+ blowerBay3(5) (if Power Domain 2 is not available),
+ blowerBay4(6) (if Power Domain 2 is not available),
+ managementModuleBay1(7),
+ managementModuleBay2(8),
+ switchModuleBay1(9),
+ switchModuleBay2(10),
+ switchModuleBay3(11),
+ switchModuleBay4(12),
+ serverBladeBay1(13),
+ serverBladeBay2(14),
+ serverBladeBay3(15),
+ serverBladeBay4(16),
+ notApplicable(17)
+ The following Bay Number IDs are used in the BladeCenter HT:
+ notApplicable(1),
+ mediatrayBay1(2),
+ mediatrayBay2(3),
+ fanPackBay1(4),
+ fanPackBay2(5),
+ fanPackBay3(6),
+ fanPackBay4(7),
+ blowerBay1(8),
+ blowerBay2(9),
+ blowerBay3(10),
+ blowerBay4(11),
+ networkclockBay1(12),
+ networkclockBay2(13),
+ midplaneelectroBay1(14),
+ midplaneelectroBay2(15),
+ notApplicable(16),
+ managementModuleBay1(17),
+ managementModuleBay2(18),
+ ioModuleBay1(19),
+ ioModuleBay2(20),
+ ioModuleBay3(21),
+ ioModuleBay4(22),
+ serverBladeBay1(23),
+ serverBladeBay2(24),
+ serverBladeBay3(25),
+ serverBladeBay4(26),
+ serverBladeBay5(27),
+ serverBladeBay6(28),
+ notApplicable(29)
+ The following Bay Number IDs are used in the BladeCenter S:
+ notApplicable(1),
+ notApplicable(2),
+ fanPackBay1(3),
+ fanPackBay2(4),
+ fanPackBay3(5),
+ fanPackBay4(6),
+ blowerBay1(7),
+ blowerBay2(8),
+ blowerBay3(9),
+ blowerBay4(10),
+ storageModuleBay1(11),
+ storageModuleBay2(12),
+ managementModuleBay(13),
+ ioModuleBay1(14),
+ ioModuleBay2(15),
+ ioModuleBay3(16),
+ ioModuleBay4(17),
+ serverBladeBay1(18),
+ serverBladeBay2(19),
+ serverBladeBay3(20),
+ serverBladeBay4(21),
+ serverBladeBay5(22),
+ serverBladeBay6(23),
+ notApplicable(24)"
+ ::= { powerDomain1Entry 2 }
+
+ pd1BladePrimarySlot OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Blade Primary Slot can be useful
+ when a server blade spans multiple slots (e.g. double wide or
+ triple wide). For example if the blade is double wide and
+ is installed in slot 3 and 4. 3 is primary slot while 4 is not."
+ ::= { powerDomain1Entry 3 }
+
+ pd1ModuleStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ insufficientPower(0),
+ moduleIsThrottling(1),
+ moduleNotThrottling(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Module Throttle Status."
+ ::= { powerDomain1Entry 4 }
+
+ pd1ModuleName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Module Name."
+ ::= { powerDomain1Entry 5 }
+
+ pd1ModuleState OBJECT-TYPE
+ SYNTAX INTEGER {
+ standby(0),
+ on(1),
+ notPresent(2),
+ off(3),
+ hibernate(4),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Module State."
+ ::= { powerDomain1Entry 6 }
+
+ pd1ModuleAllocatedPowerCurrent OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Allocated Power Current indicates the current power
+ allocation for the module in Watts. When a 1200W or 1400W power module is
+ installed in the domain the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: When a server blade spans multiple slots (e.g. double wide or
+ triple wide), the current power allocation for the module is equally
+ divided among the slots."
+ ::= { powerDomain1Entry 7 }
+
+ pd1ModuleAllocatedPowerMax OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Allocated Power Max indicates the maximum power
+ allocation for the module in Watts. It is indicative of the maximum
+ amount of power the module will consume in the domain when it is
+ fully populated with memory chips, expansion cards, etc.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: When a server blade spans multiple slots (e.g. double wide or
+ triple wide), the maximum power allocation for the module is equally
+ divided among the slots."
+ ::= { powerDomain1Entry 8 }
+
+ pd1ModuleAllocatedPowerMin OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Allocated Power Min indicates the minumum power
+ allocation for the module in Watts. It is indicative of the minumum
+ power consumption of the component in the domain based on its
+ maximum throttle limit. When a 1200W or 1400W power module is installed
+ in the domain the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: When a server blade spans multiple slots (e.g. double wide or
+ triple wide), the minimum power allocation for the module is equally
+ divided among the slots."
+ ::= { powerDomain1Entry 9 }
+
+ pd1ModuleCPUDutyCycles OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Module CPUs Duty Cycles applies to blade
+ servers only. It displays the duty cycle for each CPU on the blade
+ as a percentage. Note that some blades do not report the CPU
+ duty cycles. In this case, 'notApplicable' will be displayed.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: The CPU duty cycles are reported only on a primary slot when
+ a server blade spans multiple slots (e.g. double wide or
+ triple wide). For example if the blade is double wide and
+ is installed in slot 3 and 4. 3 is primary slot while 4 is not.
+ The CPU duty cycles are reported on slot 3 while 'notApplicable'
+ is displayed for slot 4."
+ ::= { powerDomain1Entry 10 }
+
+ pd1ModuleThrottle OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Module Throttle indicates whether the
+ server blade may be allowed to throttle or not.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored."
+ ::= { powerDomain1Entry 11 }
+
+ pd1ModulePowerCapabilities OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAbility(0),
+ staticPowerManagement(1),
+ fixedPowerManagement(2),
+ dynamicPowerManagement(3),
+ dynamicPowerMeasurement1(4),
+ dynamicPowerMeasurement2(5),
+ dynamicPowerMeasurementWithPowerCapping(6),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Module Power Capabilities.
+
+ staticPowerManagement: the module with the static worst
+ case power values.
+ fixedPowermanagement: the module with the static power values but
+ ability to throttle.
+ dynamicPowerManagement: the module with power meter capability,
+ measurement enabled, but capping disabled.
+ dynamicPowerMeasurement1: the module with power meter capability,
+ measurement enabled, phase 1 only
+ dynamicPowerMeasurement2: the module with power meter capability,
+ measurement enabled, phase 2 or higher
+ dynamicPowerMeasurementWithPowerCapping: the module with power
+ meter capability, both measurement and capping enabled,
+ phase 2 or higher"
+ ::= { powerDomain1Entry 12 }
+
+ pd1ModuleMeasuredOrStatic OBJECT-TYPE
+ SYNTAX INTEGER {
+ static(0),
+ measured(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Table Module Measured Or Static."
+ ::= { powerDomain1Entry 13 }
+
+ powerDomain1PowerTrending OBJECT IDENTIFIER ::= { powerDomain1 3 }
+
+ pd1PowerTrendingPeriod OBJECT-TYPE
+ SYNTAX INTEGER {
+ lastHour(0),
+ last6Hours(1),
+ last12Hours(2),
+ last24Hours(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specify time period for power domain 1 power trending information
+ table view.
+
+ NOTE: This time period should be configured before displaying the
+ following Power Trending Information table for Power Domain."
+ ::= { powerDomain1PowerTrending 1 }
+
+ pd1PowerTrendingSampleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Pd1PowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Power Domain 1 Power Trending Information."
+ ::= { powerDomain1PowerTrending 10 }
+
+ pd1PowerTrendingSampleEntry OBJECT-TYPE
+ SYNTAX Pd1PowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Power Trending Sample entry."
+ INDEX { pd1PowerTrendingSampleIndex }
+ ::= { pd1PowerTrendingSampleTable 1 }
+
+ Pd1PowerTrendingSampleEntry ::= SEQUENCE {
+ pd1PowerTrendingSampleIndex INTEGER,
+ pd1PowerTrendingSampleTimeStamp OCTET STRING,
+ pd1PowerTrendingSampleAve OCTET STRING
+ }
+
+ pd1PowerTrendingSampleIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Power Trending Sample Table Index."
+ ::= { pd1PowerTrendingSampleEntry 1 }
+
+ pd1PowerTrendingSampleTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Power Trending Sample Table Timestamp."
+ ::= { pd1PowerTrendingSampleEntry 2 }
+
+ pd1PowerTrendingSampleAve OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 1 Power Trending Table Average Power."
+ ::= { pd1PowerTrendingSampleEntry 3 }
+
+ -- ********************************************************************************
+ -- Fuel Gauge Power Domain 2
+ -- ********************************************************************************
+ powerDomain2 OBJECT IDENTIFIER ::= { fuelGauge 3 }
+
+ powerDomain2Table OBJECT-TYPE
+ SYNTAX SEQUENCE OF PowerDomain2Entry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Power Domain 2.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices.
+ NOTE: Fan packs are also referred to as Power Module Cooling Devices."
+ ::= { powerDomain2 1 }
+
+ powerDomain2Entry OBJECT-TYPE
+ SYNTAX PowerDomain2Entry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Fuel Gauge entry"
+ INDEX { pd2Index }
+ ::= { powerDomain2Table 1 }
+
+ PowerDomain2Entry ::= SEQUENCE {
+ pd2Index INTEGER,
+ pd2BayNumber OCTET STRING,
+ pd2BladePrimarySlot INTEGER,
+ pd2ModuleStatus INTEGER,
+ pd2ModuleName OCTET STRING,
+ pd2ModuleState INTEGER,
+ pd2ModuleAllocatedPowerCurrent OCTET STRING,
+ pd2ModuleAllocatedPowerMax OCTET STRING,
+ pd2ModuleAllocatedPowerMin OCTET STRING,
+ pd2ModuleCPUDutyCycles OCTET STRING,
+ pd2ModuleThrottle INTEGER,
+ pd2ModulePowerCapabilities INTEGER,
+ pd2ModuleMeasuredOrStatic INTEGER
+ }
+
+ pd2Index OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Index."
+ ::= { powerDomain2Entry 1 }
+
+ pd2BayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Bay Number.
+ The following Bay Number IDs are used in the BladeCenter:
+ serverBladeBay7(1),
+ serverBladeBay8(2),
+ serverBladeBay9(3),
+ serverBladeBay10(4),
+ serverBladeBay11(5),
+ serverBladeBay12(6),
+ serverBladeBay13(7),
+ serverBladeBay14(8),
+ notApplicable(9)
+ The following Bay Number IDs are used in the BladeCenter H:
+ notApplicable(1),
+ notApplicable(2),
+ fanPackBay1(3),
+ fanPackBay2(4),
+ fanPackBay3(5),
+ fanPackBay4(6),
+ managementModuleBay1(7),
+ managementModuleBay2(8),
+ ioModuleBay1(9),
+ ioModuleBay2(10),
+ ioModuleBay3(11),
+ ioModuleBay4(12),
+ ioModuleBay7(13),
+ ioModuleBay8(14),
+ ioModuleBay9(15),
+ ioModuleBay10(16),
+ serverBladeBay8(17),
+ serverBladeBay9(18),
+ serverBladeBay10(19),
+ serverBladeBay11(20),
+ serverBladeBay12(21),
+ serverBladeBay13(22),
+ serverBladeBay14(23),
+ notApplicable(24)
+ The following Bay Number IDs are used in the BladeCenter T:
+ blowerBay3(1),
+ blowerBay4(2),
+ serverBladeBay5(3),
+ serverBladeBay6(4),
+ serverBladeBay7(5),
+ serverBladeBay8(6),
+ notApplicable(7),
+ notApplicable(8),
+ notApplicable(9)
+ The following Bay Number IDs are used in the BladeCenter HT:
+ fanPackBay1(1),
+ fanPackBay2(2),
+ fanPackBay3(3),
+ fanPackBay4(4),
+ blowerBay1(5),
+ blowerBay2(6),
+ blowerBay3(7),
+ blowerBay4(8),
+ ioModuleBay7(9),
+ ioModuleBay8(10),
+ ioModuleBay9(11),
+ ioModuleBay10(12),
+ serverBladeBay7(13),
+ serverBladeBay8(14),
+ serverBladeBay9(15),
+ serverBladeBay10(16),
+ serverBladeBay11(17),
+ serverBladeBay12(18),
+ notApplicable(19)"
+ ::= { powerDomain2Entry 2 }
+
+ pd2BladePrimarySlot OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Blade Primary Slot can be useful
+ when a server blade spans multiple slots (e.g. double wide or
+ triple wide). For example if the blade is double wide and
+ is installed in slot 3 and 4. 3 is primary slot while 4 is not."
+ ::= { powerDomain2Entry 3 }
+
+ pd2ModuleStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ insufficientPower(0),
+ moduleIsThrottling(1),
+ moduleNotThrottling(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Module throttle status."
+ ::= { powerDomain2Entry 4 }
+
+ pd2ModuleName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Module Name."
+ ::= { powerDomain2Entry 5 }
+
+ pd2ModuleState OBJECT-TYPE
+ SYNTAX INTEGER {
+ standby(0),
+ on(1),
+ notPresent(2),
+ off(3),
+ hibernate(4),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Power State."
+ ::= { powerDomain2Entry 6 }
+
+ pd2ModuleAllocatedPowerCurrent OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Allocated Power Current indicates the current power
+ allocation for the module. When a 1200W or 1400W power module is
+ installed in the domain the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: When a server blade spans multiple slots (e.g. double wide or
+ triple wide), the current power allocation for the module is equally
+ divided among the slots."
+ ::= { powerDomain2Entry 7 }
+
+ pd2ModuleAllocatedPowerMax OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Allocated Power Max indicates the maximum power
+ allocation for the module in Watts. It is indicative of the maximum
+ amount of power the module will consume in the domain when it is
+ fully populated with memory chips, expansion cards, etc.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable. In addition
+ the power consumption in this domain will not be monitored.
+
+ NOTE: When a server blade spans multiple slots (e.g. double wide or
+ triple wide), the maximum power allocation for the module is equally
+ divided among the slots."
+ ::= { powerDomain2Entry 8 }
+
+ pd2ModuleAllocatedPowerMin OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Allocated Power Min indicates the minumum power
+ allocation for the module in Watts. It is indicative of the minumum
+ power consumption of the component in the domain based on its
+ maximum throttle limit. When a 1200W or 1400W power module is
+ installed in the domain the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: When a server blade spans multiple slots (e.g. double wide or
+ triple wide), the minimum power allocation for the module is equally
+ divided among the slots."
+ ::= { powerDomain2Entry 9 }
+
+ pd2ModuleCPUDutyCycles OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Module CPUs Duty Cycles applies to blade
+ servers only. It displays the duty cycle for each CPU on the blade
+ as a percentage. Note that some blades do not report the CPU
+ duty cycles. In this case, 'notApplicable' will be displayed.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: The CPU duty cycles are reported only on a primary slot when
+ a server blade spans multiple slots (e.g. double wide or
+ triple wide). For example if the blade is double wide and
+ is installed in slot 3 and 4. 3 is primary slot while 4 is not.
+ The CPU duty cycles are reported on slot 3 while 'notApplicable'
+ is displayed for slot 4. "
+ ::= { powerDomain2Entry 10 }
+
+ pd2ModuleThrottle OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Module Throttle indicates whether the
+ server blade may be allowed to throttle or not.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored."
+ ::= { powerDomain2Entry 11 }
+
+ pd2ModulePowerCapabilities OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAbility(0),
+ staticPowerManagement(1),
+ fixedPowerManagement(2),
+ dynamicPowerManagement(3),
+ dynamicPowerMeasurement1(4),
+ dynamicPowerMeasurement2(5),
+ dynamicPowerMeasurementWithPowerCapping(6),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Module Power Capabilities.
+
+ staticPowerManagement: the module with the static worst
+ case power values.
+ fixedPowermanagement: the module with the static power values but
+ ability to throttle.
+ dynamicPowerManagement: the module with power meter capability,
+ measurement enabled, but capping disabled.
+ dynamicPowerMeasurement1: the module with power meter capability,
+ measurement enabled, phase 1 only
+ dynamicPowerMeasurement2: the module with power meter capability,
+ measurement enabled, phase 2 or higher
+ dynamicPowerMeasurementWithPowerCapping: the module with power
+ meter capability, both measurement and capping enabled,
+ phase 2 or higher"
+ ::= { powerDomain2Entry 12 }
+
+ pd2ModuleMeasuredOrStatic OBJECT-TYPE
+ SYNTAX INTEGER {
+ static(0),
+ measured(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Table Module Measured Or Static."
+ ::= { powerDomain2Entry 13 }
+
+ powerDomain2PowerTrending OBJECT IDENTIFIER ::= { powerDomain2 3 }
+
+ pd2PowerTrendingPeriod OBJECT-TYPE
+ SYNTAX INTEGER {
+ lastHour(0),
+ last6Hours(1),
+ last12Hours(2),
+ last24Hours(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specify time period for power domain 2 power trending information
+ table view.
+
+ NOTE: This time period should be configured before displaying the
+ following Power Trending Information table for Power Domain."
+ ::= { powerDomain2PowerTrending 1 }
+
+ pd2PowerTrendingSampleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Pd2PowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Power Domain 2 Power Trending Sample Information."
+ ::= { powerDomain2PowerTrending 10 }
+
+ pd2PowerTrendingSampleEntry OBJECT-TYPE
+ SYNTAX Pd2PowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Power Trending Sample entry."
+ INDEX { pd2PowerTrendingSampleIndex }
+ ::= { pd2PowerTrendingSampleTable 1 }
+
+ Pd2PowerTrendingSampleEntry ::= SEQUENCE {
+ pd2PowerTrendingSampleIndex INTEGER,
+ pd2PowerTrendingSampleTimeStamp OCTET STRING,
+ pd2PowerTrendingSampleAve OCTET STRING
+ }
+
+ pd2PowerTrendingSampleIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Power Trending Sample Table Index."
+ ::= { pd2PowerTrendingSampleEntry 1 }
+
+ pd2PowerTrendingSampleTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Power Trending Sample Table Timestamp."
+ ::= { pd2PowerTrendingSampleEntry 2 }
+
+ pd2PowerTrendingSampleAve OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power Domain 2 Power Trending Sample Table Average Power."
+ ::= { pd2PowerTrendingSampleEntry 3 }
+
+ moduleInformation OBJECT IDENTIFIER ::= { fuelGauge 4 }
+
+ bladeDetails OBJECT IDENTIFIER ::= { moduleInformation 1 }
+
+ bladeDetailsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeDetailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Blade Module Details."
+ ::= { bladeDetails 1}
+
+ bladeDetailsEntry OBJECT-TYPE
+ SYNTAX BladeDetailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Details entry."
+ INDEX { bladeDetailsIndex }
+ ::= { bladeDetailsTable 1 }
+
+ BladeDetailsEntry ::= SEQUENCE {
+ bladeDetailsIndex INTEGER,
+ bladeDetailsId INTEGER,
+ bladeDetailsMaxPowerConfig INTEGER,
+ bladeDetailsEffectiveClockRate OCTET STRING,
+ bladeDetailsMaximumClockRate OCTET STRING,
+ bladeDetailsPowerSaverMode INTEGER,
+ bladeDetailsDynamicPowerSaver INTEGER,
+ bladeDetailsDynamicPowerFavorPerformanceOverPower INTEGER,
+ bladeDetailsPowerControl INTEGER
+ }
+
+ bladeDetailsIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Details Table Index."
+ ::= { bladeDetailsEntry 1 }
+
+ bladeDetailsId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Details Table Blade Id."
+ ::= { bladeDetailsEntry 2 }
+
+ bladeDetailsMaxPowerConfig OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Details Table Maximum Power Configuration.
+ Allow the user to set the maximum power that can be used by the blade. This
+ function is also known as power capping.
+
+ If the value of maximum power config is zero, it means the blade doesn't
+ support the power capping feature"
+ ::= { bladeDetailsEntry 3 }
+
+ bladeDetailsEffectiveClockRate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Details Table Effective CPU Clock Rate applies to DPM
+ blades only. It displays processor's effective clock rate based
+ on sample interval. Note that some blades do not effective
+ clock rate. In this case, 'notApplicable' will be displayed.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: The effective clock rate are reported only on a primary slot when
+ a server blade spans multiple slots (e.g. double wide or
+ triple wide). For example if the blade is double wide and
+ is installed in slot 3 and 4. 3 is primary slot while 4 is not.
+ The effective clock rate are reported on slot 3 while 'notApplicable'
+ is displayed for slot 4."
+ ::= { bladeDetailsEntry 4 }
+
+ bladeDetailsMaximumClockRate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Details Table Maximum CPU Clock Rate applies to DPM
+ blades only. It displays processor's maximum clock rate based
+ on sample interval. Note that some blades do not maximum
+ clock rate. In this case, 'notApplicable' will be displayed.
+ When a 1200W or 1400W power module is installed in the domain
+ the power management policy will not be applicable.
+ In addition the power consumption in this domain will not be monitored.
+
+ NOTE: The maximum clock rate are reported only on a primary slot when
+ a server blade spans multiple slots (e.g. double wide or
+ triple wide). For example if the blade is double wide and
+ is installed in slot 3 and 4. 3 is primary slot while 4 is not.
+ The maximum clock rate are reported on slot 3 while 'notApplicable'
+ is displayed for slot 4."
+ ::= { bladeDetailsEntry 5 }
+
+ bladeDetailsPowerSaverMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When enabled, the static low power saver mode allows the blade to selectively
+ alter its operating voltage and frequency to reduce power consumption.
+ This feature is not available on all blade types. Please refer to the blade documentation for details.
+ If a blade does not support the static low power saver mode, this object will return notApplicable (255).
+
+ Under certain rare circumstances, the enabling of the static low power saver mode
+ may not complete successfully due to interactions with other
+ blade functions, such as BIOS. Therefore, it is highly recommended that
+ the user perform a GET of this object after performing a SET, in order
+ to verify the completion of the intended operation.
+
+ NOTE: enabling this object will disable bladeDetailsDynamicPowerSaver if its not already disabled."
+ ::= { bladeDetailsEntry 6 }
+
+ bladeDetailsDynamicPowerSaver OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When enabled, Dynamic Power Saver allows the voltage and frequency of the CPUs on the blade
+ to be controlled based on how busy the CPU is. This feature is not available on all blade types.
+ Please refer to the blade documentation for details. If a blade does not support the dynamic power
+ saver, this object will return notApplicable (255).
+
+ Under certain rare circumstances, the enabling of the dynamic power saver may not complete
+ successfully due to interactions with other blade functions, such as BIOS. Therefore, it is
+ highly recommended that the user perform a GET of this object after performing a SET, in order
+ to verify the completion of the intended operation.
+
+ NOTE: enabling this object will disable bladeDetailsPowerSaverMode if its not already disabled."
+ ::= { bladeDetailsEntry 7 }
+
+ bladeDetailsDynamicPowerFavorPerformanceOverPower OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the
+ system past its nominal CPU frequency when CPU and memory utilization implies it would help and the
+ system allows it. Dynamic Power Performance Over Power can be active on the blade only after Dynamic
+ Power Saver is enabled. This feature is not available on all blade types. Please refer to the
+ blade documentation for details. If a blade does not support the dynamic power saver, this object
+ will return notApplicable (255).
+
+ Under certain rare circumstances, the enabling of the dynamic power favor performance over power
+ may not complete successfully due to interactions with other blade functions, such as BIOS.
+ Therefore, it is highly recommended that the user perform a GET of this object after performing a SET,
+ in order to verify the completion of the intended operation."
+ ::= { bladeDetailsEntry 8 }
+
+ bladeDetailsPowerControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ measurement(1),
+ measurementpcap(2),
+ psave(3),
+ measurementpsave(4),
+ measurementpcappsave(5),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object is used to get or set the power control setting on a blade.
+
+ If dynamic power mgmt is not supported on a blade, notApplicable(255) will be returned.
+
+ This will set the power control setting on all slots of the multiwide blade. The
+ same can be used if the blade is single wide."
+ ::= { bladeDetailsEntry 9 }
+
+ bladePowerTrending OBJECT IDENTIFIER ::= { bladeDetails 3 }
+
+ bladePowerTrendingPeriod OBJECT-TYPE
+ SYNTAX INTEGER {
+ lastHour(0),
+ last6Hours(1),
+ last12Hours(2),
+ last24Hours(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specify time period for blade module power trending information table view.
+
+ NOTE: This time period should be configured before displaying the
+ following Power Trending Information table for Blade Module."
+ ::= { bladePowerTrending 1 }
+
+ bladePowerTrendingBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Power Trending Blade Id.
+
+ NOTE: The Blade Id should be configured before displaying the
+ bladePowerTrendingTable."
+ ::= { bladePowerTrending 2 }
+
+ bladePowerTrendingSampleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladePowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Blade Module Power Trending Information."
+ ::= { bladePowerTrending 10 }
+
+ bladePowerTrendingSampleEntry OBJECT-TYPE
+ SYNTAX BladePowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Power Trending Sample entry."
+ INDEX { bladePowerTrendingSampleIndex }
+ ::= { bladePowerTrendingSampleTable 1 }
+
+ BladePowerTrendingSampleEntry ::= SEQUENCE {
+ bladePowerTrendingSampleIndex INTEGER,
+ bladePowerTrendingSampleId INTEGER,
+ bladePowerTrendingSampleTimeStamp OCTET STRING,
+ bladePowerTrendingSampleMax OCTET STRING,
+ bladePowerTrendingSampleMin OCTET STRING,
+ bladePowerTrendingSampleAve OCTET STRING
+ }
+
+ bladePowerTrendingSampleIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Power Trending Sample Table Index."
+ ::= { bladePowerTrendingSampleEntry 1 }
+
+ bladePowerTrendingSampleId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Power Trending Sample Table Blade Id."
+ ::= { bladePowerTrendingSampleEntry 2 }
+
+ bladePowerTrendingSampleTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Power Trending Sample Table Timestamp."
+ ::= { bladePowerTrendingSampleEntry 3 }
+
+ bladePowerTrendingSampleMax OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Power Trending Sample Table Maximum Power."
+ ::= { bladePowerTrendingSampleEntry 4 }
+
+ bladePowerTrendingSampleMin OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Power Trending Sample Table Minimum Power."
+ ::= { bladePowerTrendingSampleEntry 5 }
+
+ bladePowerTrendingSampleAve OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Module Power Trending Sample Table Average Power."
+ ::= { bladePowerTrendingSampleEntry 6 }
+
+
+ switchDetails OBJECT IDENTIFIER ::= { moduleInformation 2 }
+
+ switchPowerTrending OBJECT IDENTIFIER ::= { switchDetails 3 }
+
+ switchPowerTrendingPeriod OBJECT-TYPE
+ SYNTAX INTEGER {
+ lastHour(0),
+ last6Hours(1),
+ last12Hours(2),
+ last24Hours(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specify time period for switch module power trending information table view.
+
+ NOTE: This time period should be configured before displaying the
+ following Power Trending Information table for Switch Module."
+ ::= { switchPowerTrending 1 }
+
+ switchPowerTrendingSwitchId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Power Trending Switch Id.
+
+ NOTE: The Switch Id should be configured before displaying the
+ switchPowerTrendingTable."
+ ::= { switchPowerTrending 2 }
+
+ switchPowerTrendingSampleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SwitchPowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Switch Module Power Trending Information."
+ ::= { switchPowerTrending 10 }
+
+ switchPowerTrendingSampleEntry OBJECT-TYPE
+ SYNTAX SwitchPowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Power Trending Sample entry."
+ INDEX { switchPowerTrendingSampleIndex }
+ ::= { switchPowerTrendingSampleTable 1 }
+
+ SwitchPowerTrendingSampleEntry ::= SEQUENCE {
+ switchPowerTrendingSampleIndex INTEGER,
+ switchPowerTrendingSampleId INTEGER,
+ switchPowerTrendingSampleTimeStamp OCTET STRING,
+ switchPowerTrendingSampleMax OCTET STRING,
+ switchPowerTrendingSampleMin OCTET STRING,
+ switchPowerTrendingSampleAve OCTET STRING
+ }
+
+ switchPowerTrendingSampleIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Power Trending Sample Table Index."
+ ::= { switchPowerTrendingSampleEntry 1 }
+
+ switchPowerTrendingSampleId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Power Trending Sample Table Switch Id."
+ ::= { switchPowerTrendingSampleEntry 2 }
+
+ switchPowerTrendingSampleTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Power Trending Sample Table Timestamp."
+ ::= { switchPowerTrendingSampleEntry 3 }
+
+ switchPowerTrendingSampleMax OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Power Trending Sample Table Maximum Power."
+ ::= { switchPowerTrendingSampleEntry 4 }
+
+ switchPowerTrendingSampleMin OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Power Trending Sample Table Minimum Power."
+ ::= { switchPowerTrendingSampleEntry 5 }
+
+ switchPowerTrendingSampleAve OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Power Trending Sample Table Average Power."
+ ::= { switchPowerTrendingSampleEntry 6 }
+
+
+ blowerDetails OBJECT IDENTIFIER ::= { moduleInformation 3 }
+
+ blowerPowerTrending OBJECT IDENTIFIER ::= { blowerDetails 3 }
+
+ blowerPowerTrendingPeriod OBJECT-TYPE
+ SYNTAX INTEGER {
+ lastHour(0),
+ last6Hours(1),
+ last12Hours(2),
+ last24Hours(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specify time period for blower module power trending information table view.
+
+ NOTE: This time period should be configured before displaying the
+ following Power Trending Information table for Blower Module.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowerPowerTrending 1 }
+
+ blowerPowerTrendingBlowerId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blower1(1),
+ blower2(2),
+ blower3(3),
+ blower4(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Module Power Trending Blower Id.
+
+ NOTE: The Blower Id should be configured before displaying the blowerPowerTrendingTable.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowerPowerTrending 2 }
+
+ blowerPowerTrendingSampleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BlowerPowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Blower Module Power Trending Information.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowerPowerTrending 10 }
+
+ blowerPowerTrendingSampleEntry OBJECT-TYPE
+ SYNTAX BlowerPowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Module Power Trending Sample entry."
+ INDEX { blowerPowerTrendingSampleIndex }
+ ::= { blowerPowerTrendingSampleTable 1 }
+
+ BlowerPowerTrendingSampleEntry ::= SEQUENCE {
+ blowerPowerTrendingSampleIndex INTEGER,
+ blowerPowerTrendingSampleId INTEGER,
+ blowerPowerTrendingSampleTimeStamp OCTET STRING,
+ blowerPowerTrendingSampleMax OCTET STRING,
+ blowerPowerTrendingSampleMin OCTET STRING,
+ blowerPowerTrendingSampleAve OCTET STRING
+ }
+
+ blowerPowerTrendingSampleIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Module Power Trending Sample Table Index."
+ ::= { blowerPowerTrendingSampleEntry 1 }
+
+ blowerPowerTrendingSampleId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blower1(1),
+ blower2(2),
+ blower3(3),
+ blower4(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Module Power Trending Sample Table Blower Id."
+ ::= { blowerPowerTrendingSampleEntry 2 }
+
+ blowerPowerTrendingSampleTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Module Power Trending Sample Table Timestamp."
+ ::= { blowerPowerTrendingSampleEntry 3 }
+
+ blowerPowerTrendingSampleMax OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Module Power Trending Sample Table Maximum Power."
+ ::= { blowerPowerTrendingSampleEntry 4 }
+
+ blowerPowerTrendingSampleMin OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Module Power Trending Sample Table Minimum Power."
+ ::= { blowerPowerTrendingSampleEntry 5 }
+
+ blowerPowerTrendingSampleAve OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Module Power Trending Sample Table Average Power."
+ ::= { blowerPowerTrendingSampleEntry 6 }
+
+ -- ******************************************************************************
+ -- Chassis Global Information
+ -- ******************************************************************************
+
+ chassisInformation OBJECT IDENTIFIER ::= { fuelGauge 5 }
+
+ chassisConfiguration OBJECT IDENTIFIER ::= { chassisInformation 1 }
+
+ chassisTotalDCPowerAvailable OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis total DC power available, which displays the total DC power available
+ for the entire chassis. It is the sum of the two power domains."
+ ::= { chassisConfiguration 1 }
+
+ chassisTotalACPowerInUsed OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis total AC power being used, which displays the total AC power
+ being consumed by all modules in the chassis. It also includes power
+ consumed by the blowers (chassis oooling devices) for the chassis."
+ ::= { chassisConfiguration 2 }
+
+ chassisTotalThermalOutput OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis total thermal output, which displays the thermal output
+ (load) in BTUs per hour. It is calculated based on the total AC
+ power in use. (1 Watt = 3.412 BTU/hour)."
+ ::= { chassisConfiguration 3 }
+
+ chassisTrendingSampleInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Power and Thermal Trending Sample Interval.
+ 0 means no trending. the minimum interval is 10 minutes and the maximum
+ is 60 minutes, in 5 minute increments."
+ ::= { chassisConfiguration 4 }
+
+ chassisPowerService OBJECT-TYPE
+ SYNTAX INTEGER {
+ volt110(1),
+ volt220(2),
+ notAvailable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The chassis power service mode.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { chassisConfiguration 5 }
+
+ -- ******************************************************************************
+ -- Chassis Power Trending Information
+ -- ******************************************************************************
+ chassisPowerTrending OBJECT IDENTIFIER ::= { chassisInformation 3 }
+
+ chassisPowerTrendingPeriod OBJECT-TYPE
+ SYNTAX INTEGER {
+ lastHour(0),
+ last6Hours(1),
+ last12Hours(2),
+ last24Hours(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specify time period of power trending information.
+ NOTE: This time period should be configured before displaying the
+ following Power Trending Information table for Chassis."
+ ::= { chassisPowerTrending 1 }
+
+ chassisPowerTrendingSampleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ChassisPowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Chassis Power Trending Sample Information in specified time period."
+ ::= { chassisPowerTrending 10 }
+
+ chassisPowerTrendingSampleEntry OBJECT-TYPE
+ SYNTAX ChassisPowerTrendingSampleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Power Trending Sample entry in specified time period."
+ INDEX { chassisPowerTrendingSampleIndex }
+ ::= { chassisPowerTrendingSampleTable 1 }
+
+ ChassisPowerTrendingSampleEntry ::= SEQUENCE {
+ chassisPowerTrendingSampleIndex INTEGER,
+ chassisPowerTrendingSampleTimeStamp OCTET STRING,
+ chassisPowerTrendingSampleAve OCTET STRING
+ }
+
+ chassisPowerTrendingSampleIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Power Trending Sample Index in specified time period."
+ ::= { chassisPowerTrendingSampleEntry 1 }
+
+ chassisPowerTrendingSampleTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Power Trending Sample Timestamp in specified time period."
+ ::= { chassisPowerTrendingSampleEntry 2 }
+
+ chassisPowerTrendingSampleAve OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Power Trending Sample Average Power in specified time period."
+ ::= { chassisPowerTrendingSampleEntry 3 }
+
+ -- ******************************************************************************
+ -- Chassis Thermal Trending Information
+ -- ******************************************************************************
+ chassisThermalTrending OBJECT IDENTIFIER ::= { chassisInformation 5 }
+
+ chassisThermalTrendingPeriod OBJECT-TYPE
+ SYNTAX INTEGER {
+ lastHour(0),
+ last6Hours(1),
+ last12Hours(2),
+ last24Hours(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specify time period of thermal trending information.
+ NOTE: This time period should be configured before displaying the
+ following Thermal Trending Information table for Chassis."
+ ::= { chassisThermalTrending 1 }
+
+ mt1ThermalTrendingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mt1ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Media Tray 1 Thermal Trending Information."
+ ::= { chassisThermalTrending 10 }
+
+ mt1ThermalTrendingEntry OBJECT-TYPE
+ SYNTAX Mt1ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray 1 Thermal Trending entry."
+ INDEX { mt1ThermalTrendingIndex }
+ ::= { mt1ThermalTrendingTable 1 }
+
+ Mt1ThermalTrendingEntry ::= SEQUENCE {
+ mt1ThermalTrendingIndex INTEGER,
+ mt1ThermalTrendingTimeStamp OCTET STRING,
+ mt1ThermalTrendingTemperature OCTET STRING
+ }
+
+ mt1ThermalTrendingIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray 1 Thermal Trending Table Index."
+ ::= { mt1ThermalTrendingEntry 1 }
+
+ mt1ThermalTrendingTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray 1 Thermal Trending Table Sample Timestamp."
+ ::= { mt1ThermalTrendingEntry 2 }
+
+ mt1ThermalTrendingTemperature OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray 1 Thermal Trending Table Temperature."
+ ::= { mt1ThermalTrendingEntry 3 }
+
+ mt2ThermalTrendingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Mt2ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Media Tray 2 Thermal Trending Information.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { chassisThermalTrending 15 }
+
+ mt2ThermalTrendingEntry OBJECT-TYPE
+ SYNTAX Mt2ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray 2 Thermal Trending entry.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ INDEX { mt2ThermalTrendingIndex }
+ ::= { mt2ThermalTrendingTable 1 }
+
+ Mt2ThermalTrendingEntry ::= SEQUENCE {
+ mt2ThermalTrendingIndex INTEGER,
+ mt2ThermalTrendingTimeStamp OCTET STRING,
+ mt2ThermalTrendingTemperature OCTET STRING
+ }
+
+ mt2ThermalTrendingIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray 2 Thermal Trending Table Index.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mt2ThermalTrendingEntry 1 }
+
+ mt2ThermalTrendingTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray 2 Thermal Trending Table Sample Timestamp.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mt2ThermalTrendingEntry 2 }
+
+ mt2ThermalTrendingTemperature OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media Tray 2 Thermal Trending Table Temperature.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mt2ThermalTrendingEntry 3 }
+
+ blower1ThermalTrendingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Blower1ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Blower 1 Thermal Trending Information.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { chassisThermalTrending 20}
+
+ blower1ThermalTrendingEntry OBJECT-TYPE
+ SYNTAX Blower1ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 1 Thermal Trending entry."
+ INDEX { blower1ThermalTrendingIndex }
+ ::= { blower1ThermalTrendingTable 1 }
+
+ Blower1ThermalTrendingEntry ::= SEQUENCE {
+ blower1ThermalTrendingIndex INTEGER,
+ blower1ThermalTrendingTimeStamp OCTET STRING,
+ blower1ThermalTrendingTemperature OCTET STRING
+ }
+
+ blower1ThermalTrendingIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 1 Thermal Trending Table Index."
+ ::= { blower1ThermalTrendingEntry 1 }
+
+ blower1ThermalTrendingTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 1 Thermal Trending Table Sample Timestamp."
+ ::= { blower1ThermalTrendingEntry 2 }
+
+ blower1ThermalTrendingTemperature OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 1 Thermal Trending Table Temperature."
+ ::= { blower1ThermalTrendingEntry 3 }
+
+ blower2ThermalTrendingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Blower2ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Blower 2 Thermal Trending Information.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { chassisThermalTrending 30}
+
+ blower2ThermalTrendingEntry OBJECT-TYPE
+ SYNTAX Blower2ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blower Thermal 2 Trending entry."
+ INDEX { blower2ThermalTrendingIndex }
+ ::= { blower2ThermalTrendingTable 1 }
+
+ Blower2ThermalTrendingEntry ::= SEQUENCE {
+ blower2ThermalTrendingIndex INTEGER,
+ blower2ThermalTrendingTimeStamp OCTET STRING,
+ blower2ThermalTrendingTemperature OCTET STRING
+ }
+
+ blower2ThermalTrendingIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 2 Thermal Trending Table Index."
+ ::= { blower2ThermalTrendingEntry 1 }
+
+ blower2ThermalTrendingTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 2 Thermal Trending Table Sample Timestamp."
+ ::= { blower2ThermalTrendingEntry 2 }
+
+ blower2ThermalTrendingTemperature OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 2 Thermal Trending Table Temperature."
+ ::= { blower2ThermalTrendingEntry 3 }
+
+ blower3ThermalTrendingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Blower3ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Blower 3 Thermal Trending Information.
+
+ NOTE: This MIB object is for BladeCenter T only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { chassisThermalTrending 40}
+
+ blower3ThermalTrendingEntry OBJECT-TYPE
+ SYNTAX Blower3ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 3 Thermal Trending entry.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ INDEX { blower3ThermalTrendingIndex }
+ ::= { blower3ThermalTrendingTable 1 }
+
+ Blower3ThermalTrendingEntry ::= SEQUENCE {
+ blower3ThermalTrendingIndex INTEGER,
+ blower3ThermalTrendingTimeStamp OCTET STRING,
+ blower3ThermalTrendingTemperature OCTET STRING
+ }
+
+ blower3ThermalTrendingIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 3 Thermal Trending Table Index.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { blower3ThermalTrendingEntry 1 }
+
+ blower3ThermalTrendingTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 3 Thermal Trending Table Sample Timestamp.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { blower3ThermalTrendingEntry 2 }
+
+ blower3ThermalTrendingTemperature OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 3 Thermal Trending Table Temperature.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { blower3ThermalTrendingEntry 3 }
+
+ blower4ThermalTrendingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Blower4ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Blower 4 Thermal Trending Information.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { chassisThermalTrending 50}
+
+ blower4ThermalTrendingEntry OBJECT-TYPE
+ SYNTAX Blower4ThermalTrendingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 4 Thermal Trending entry.
+
+ NOTE: This MIB object is for BladeCenter T only.
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ INDEX { blower4ThermalTrendingIndex }
+ ::= { blower4ThermalTrendingTable 1 }
+
+ Blower4ThermalTrendingEntry ::= SEQUENCE {
+ blower4ThermalTrendingIndex INTEGER,
+ blower4ThermalTrendingTimeStamp OCTET STRING,
+ blower4ThermalTrendingTemperature OCTET STRING
+ }
+
+ blower4ThermalTrendingIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 4 Thermal Trending Table Index.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { blower4ThermalTrendingEntry 1 }
+
+ blower4ThermalTrendingTimeStamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 4 Thermal Trending Table Sample Timestamp.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { blower4ThermalTrendingEntry 2 }
+
+ blower4ThermalTrendingTemperature OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower 4 Thermal Trending Table Temperature.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { blower4ThermalTrendingEntry 3 }
+
+
+ -- ********************************************************************************
+ -- Power Policy Table
+ -- ********************************************************************************
+ powerPolicyInformation OBJECT IDENTIFIER ::= { fuelGauge 6 }
+
+ powerPolicyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PowerPolicyEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Power Policy information for all power domains. Reading this
+ table can tell you about the available power policies that can be
+ configured for a domain and also which is currently selected. The
+ powerPolicyActivate object can also be SET to select which policy
+ should be active for a given power domain."
+ ::= { powerPolicyInformation 1 }
+
+ powerPolicyEntry OBJECT-TYPE
+ SYNTAX PowerPolicyEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Power Policy Entry"
+ INDEX { powerPolicyIndex }
+ ::= { powerPolicyTable 1 }
+
+ PowerPolicyEntry ::= SEQUENCE {
+ powerPolicyIndex INTEGER,
+ powerPolicyPowerDomainNumber INTEGER,
+ powerPolicyName OCTET STRING,
+ powerPolicyPwrSupplyFailureLimit INTEGER,
+ powerPolicyMaxPowerLimit INTEGER,
+ powerPolicyEstimatedUtilization INTEGER,
+ powerPolicyActivate INTEGER
+ }
+
+ powerPolicyIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique idenitifier of a row in the powerPolicyTable."
+ ::= { powerPolicyEntry 1 }
+
+ powerPolicyPowerDomainNumber OBJECT-TYPE
+ SYNTAX INTEGER {
+ powerDomain1(1),
+ powerDomain2(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power domain number which this row is associated with."
+ ::= { powerPolicyEntry 2 }
+
+ powerPolicyName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The short name of the power policy. The following are the possible
+ names and their detailed description:
+
+ Power Module Redundancy
+ Intended for a single AC power source into the chassis
+ where each Power Module is on its own dedicated circuit.
+ Total allowed power draw is limited to one less than the
+ number of Power Modules when more than one Power Module is
+ present. One Power Module can fail without affecting blade
+ operation. Multiple Power Module failures can cause
+ the chassis to power off. Note that some blades may not be
+ allowed to power on if doing so would exceed the policy power
+ limit.
+
+ Power Module Redundancy with Blade Throttling Allowed
+ Very similar to the Power Module Redundancy policy. This
+ policy allows you to draw more total power; however, capable
+ blades may be allowed to throttle down if one Power Module fails.
+
+ Basic Power Management
+ Total allowed power is higher than other policies and is limited only
+ by the total power capacity of all the Power Modules up to the maximum
+ of chassis power rating. This is the least conservative approach, since
+ it does not provide any protection for AC power source or Power Module
+ failure. If any single power supply fails, blade and/or chassis
+ operation may be affected.
+
+ AC Power Source Redundancy
+ Intended for dual AC power sources into the chassis. Total
+ allowed power draw is limited to the capacity of two Power
+ Modules. This is the most conservative approach and is
+ recommended when all four Power Modules are installed.
+ When the chassis is correctly wired with dual AC power
+ sources, one AC power source can fail without affecting
+ blade operation. Note that some blades may not be
+ allowed to power on if doing so would exceed the policy
+ power limit.
+
+ AC Power Source Redundancy with Blade Throttling Allowed
+ Very similar to the AC Power Source Redundancy policy. This policy
+ allows you to draw more total power; however, capable blades
+ may be allowed to throttle down if one AC power source fails."
+ ::= { powerPolicyEntry 3 }
+
+ powerPolicyPwrSupplyFailureLimit OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum number of power supplies that can fail in a chassis
+ while still providing redundancy."
+ ::= { powerPolicyEntry 4 }
+
+ powerPolicyMaxPowerLimit OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum power available (in watts), based on the number of power modules and
+ the Power Management Policy setting."
+ ::= { powerPolicyEntry 5 }
+
+ powerPolicyEstimatedUtilization OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The estimated utilization (as a percentage) based on current power usage."
+ ::= { powerPolicyEntry 6 }
+
+ powerPolicyActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When read, this object provides the status of this power policy. If the
+ value is enabled(1), it means this is the active power policy for the
+ associated domain. When set to a value of enabled(1), the power policy
+ will be made the active one for the associated domain. A set of disabled(0)
+ is not allowed.
+
+ The SET may fail when the user goes from a less restrictive policy
+ to a more restrictive policy, e.g. no power management to redundant power
+ modules.
+
+ This happens because the AMM might have allocated more power for components
+ in the less restrictive policy. Then if a user wants to go to a more restrictive
+ policy, the power available may be lower than what was already allocated.
+
+ The SET should always succeed if a user goes from a more restrictive to
+ a less restrictive policy."
+ ::= { powerPolicyEntry 7 }
+
+ -- ********************************************************************************
+ -- Error logs
+ -- ********************************************************************************
+ eventLog OBJECT IDENTIFIER ::= { errorLogs 4 }
+
+ readEventLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ReadEventLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of event log entry information."
+ ::= { eventLog 2 }
+
+ readEventLogEntry OBJECT-TYPE
+ SYNTAX ReadEventLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Event log table entry"
+ INDEX { readEventLogIndex }
+ ::= { readEventLogTable 1 }
+
+
+ ReadEventLogEntry ::= SEQUENCE {
+ readEventLogIndex INTEGER,
+ readEventLogString OCTET STRING
+ }
+
+
+ readEventLogIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The event log index number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readEventLogEntry 1 }
+
+ readEventLogString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string of data detailing an event.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readEventLogEntry 2 }
+
+
+
+ clearEventLog OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clear the event log.
+
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object."
+ ::= { eventLog 3 }
+
+ monitorLogStateEvents OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If disabled, it means the info LED will not turn on when the log gets full
+ and no alerts will be sent out. If enabled, the LED will turn on when the log
+ gets full and alerts will be sent out."
+ ::= { eventLog 4 }
+
+ readEnhancedEventLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ReadEnhancedEventLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of enhanced event log entry information."
+ ::= { eventLog 6 }
+
+ readEnhancedEventLogEntry OBJECT-TYPE
+ SYNTAX ReadEnhancedEventLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Enhaced Event log table entry, new entries could be added for new items."
+ INDEX { readEnhancedEventLogNumber }
+ ::= { readEnhancedEventLogTable 1 }
+
+ ReadEnhancedEventLogEntry ::= SEQUENCE {
+ readEnhancedEventLogNumber INTEGER,
+ readEnhancedEventLogAttribute OCTET STRING,
+ readEnhancedEventLogMessage OCTET STRING
+ }
+
+ readEnhancedEventLogNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The event log number for the enhanced event log.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readEnhancedEventLogEntry 1 }
+
+ readEnhancedEventLogAttribute OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string of data detailing an event log's attribute, such as the
+ Event ID and Call Home Flag. The Event ID is a hexadecimal number representing an specific or class of events.
+ The call home flag indicates that the corresponding problem may result in a call home.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readEnhancedEventLogEntry 2}
+ readEnhancedEventLogMessage OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string of data detailing an event log message.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readEnhancedEventLogEntry 3}
+
+ readAuditLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ReadAuditLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of audit log entry information. Audit log includes the logs whose source is 'Audit'"
+ ::= { eventLog 10 }
+
+ readAuditLogEntry OBJECT-TYPE
+ SYNTAX ReadAuditLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Audit log table entry, new entries could be added for new items."
+ INDEX { readAuditLogNumber }
+ ::= { readAuditLogTable 1 }
+
+
+ ReadAuditLogEntry ::= SEQUENCE {
+ readAuditLogNumber INTEGER,
+ readAuditLogAttribute OCTET STRING,
+ readAuditLogMessage OCTET STRING
+ }
+
+
+ readAuditLogNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The audit log number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readAuditLogEntry 1 }
+
+ readAuditLogAttribute OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string of data detailing an audit eventlog's attribute.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readAuditLogEntry 2 }
+ readAuditLogMessage OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string of data detailing an audit event log message.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readAuditLogEntry 3 }
+
+ clearAuditLog OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clear the audit log.
+
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object."
+ ::= { eventLog 11 }
+
+ readSystemLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ReadSystemLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of system log entry information. System log includes the logs whose source is other than 'Audit'"
+ ::= { eventLog 12 }
+
+ readSystemLogEntry OBJECT-TYPE
+ SYNTAX ReadSystemLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "System log table entry, new entries could be added for new items."
+ INDEX { readSystemLogNumber }
+ ::= { readSystemLogTable 1 }
+
+
+ ReadSystemLogEntry ::= SEQUENCE {
+ readSystemLogNumber INTEGER,
+ readSystemLogAttribute OCTET STRING,
+ readSystemLogMessage OCTET STRING
+ }
+
+
+ readSystemLogNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The system log index number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readSystemLogEntry 1 }
+
+ readSystemLogAttribute OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string of data detailing an system event log's attribute.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readSystemLogEntry 2 }
+ readSystemLogMessage OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string of data detailing an system event log message.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readSystemLogEntry 3 }
+
+ clearSystemLog OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clear the system log.
+
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object."
+ ::= { eventLog 13 }
+
+
+-- ********************************************************************************
+-- Configure the MM
+-- ********************************************************************************
+ -- ********************************************************************************
+ -- Remote Access Configuration
+ -- ********************************************************************************
+ remoteAccessConfig OBJECT IDENTIFIER ::= { configureSP 1 }
+
+ -- ********************************************************************************
+ -- General Remote Access and Remote Alerts Configuration
+ -- ********************************************************************************
+ generalRemoteCfg OBJECT IDENTIFIER ::= { remoteAccessConfig 1 }
+
+ remoteAlertRetryDelay OBJECT-TYPE
+ SYNTAX INTEGER {
+ noDelay(0), -- deprecated
+ oneHalfMinute(30),
+ oneMinute(60),
+ oneAndHalfMinutes(90),
+ twoMinutes(120),
+ twoAndHalfMinutes(150),
+ threeMinutes(180),
+ threeAndHalfMinutes(210),
+ fourMinutes(240)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number in seconds to delay between retries if sending a
+ remote alert is unsuccessful."
+ ::= { generalRemoteCfg 3 }
+
+ remoteAlertRetryCount OBJECT-TYPE
+ SYNTAX INTEGER {
+ noretry(0),
+ retry1(1),
+ retry2(2),
+ retry3(3),
+ retry4(4),
+ retry5(5),
+ retry6(6),
+ retry7(7),
+ retry8(8)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number of additional times a remote alert will be
+ retried if not successfully sent. A value of zero indicates
+ no retries will be attempted."
+ ::= { generalRemoteCfg 4 }
+
+ remoteAlertEntryDelay OBJECT-TYPE
+ SYNTAX INTEGER {
+ noDelay(0),
+ oneHalfMinute(30),
+ oneMinute(60),
+ oneAndHalfMinutes(90),
+ twoMinutes(120),
+ twoAndHalfMinutes(150),
+ threeMinutes(180),
+ threeAndHalfMinutes(210),
+ fourMinutes(240)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Number in seconds to delay between entries if sending a
+ remote alert is unsuccessful.
+
+ NOTE: This object is no longer supported. However, for
+ compatibilities sake, a value of (255) is returned when
+ read. Also, write access has been removed."
+ ::= { generalRemoteCfg 5 }
+
+ remoteAccessTamperDelay OBJECT-TYPE
+ SYNTAX INTEGER {
+ nowait(0),
+ oneMinute(1),
+ twoMinutes(2),
+ threeMinutes(3),
+ fourMinutes(4),
+ fiveMinutes(5),
+ sixMinutes(6),
+ sevenMinutes(7),
+ tenMinutes(10),
+ fifteenMinutes(15),
+ twentyMinutes(20),
+ thirtyMinutes(30),
+ sixtyMinutes(60),
+ oneTwentyMinutes(120),
+ oneEightyMinutes(180),
+ twoFortyMinutes(240)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This value is no longer supported and has been replaced by
+ 'lockoutPeriod'."
+ ::= { generalRemoteCfg 6 }
+
+
+ userAuthenticationMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ localOnly(0),
+ ldapOnly(1),
+ localFirstThenLdap(2),
+ ldapFirstThenLocal(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Use this field to specify how users attempting to login should be authenticated.
+ There are two methods:
+ Local authentication. Userid and password are verified by searching the list
+ of users locally configured under Local Login Profiles.
+ LDAP based authentication. Users are authenticated via a remote LDAP server.
+ One or both authentication methods can be selected. If both methods should be
+ used, the order must be specified."
+ ::= { generalRemoteCfg 7 }
+
+ maxSessionsPerLDAPUser OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum number of simultaneous active sessions allowed for
+ each LDAP user. If the value is 0, this option is disabled. The
+ minimum value is 1 and the maximum value is 20."
+ ::= { generalRemoteCfg 9 }
+ authenticationLoggingTimeout OBJECT-TYPE
+ SYNTAX INTEGER {
+ logAll(0),
+ fiveSeconds(1),
+ thirtySeconds(2),
+ oneMinute(3),
+ fiveMinutes(4),
+ tenMinutes(5),
+ thirtyMinutes(6),
+ oneHour(7),
+ twelveHours(8),
+ oneDay(9),
+ logNone(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Use this option to set how long, in seconds, AMM will not log the authentication
+ events for the same user. The default setting is 5 minutes. 0 indicates log all
+ authentication events, 255 indicates don't log any new authentication events."
+ ::= { generalRemoteCfg 10 }
+ trackingIP OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This option indicates tracking different IP addresses for the same user is
+ enabled or not. If it is enabled then an access every second from
+ alternating IP addresses will result in multiple log entries,
+ regardless of the time duration set in the 'authenticaionLoggingTimeout'field.
+ If this flag is disabled, multiple accesses by varying IP addresses
+ will only be logged as 'new' accesses if they are out of the
+ 'authenticationLoggingTimeout'."
+ ::= { generalRemoteCfg 11 }
+
+ -- ********************************************************************************
+ -- Account security management
+ -- ********************************************************************************
+ accountSecurityManagement OBJECT IDENTIFIER ::= { generalRemoteCfg 20 }
+
+ accountSecurityLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ legacy(0),
+ high(1),
+ custom(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The level of security needed for local user login passwords.
+ The legacy level:
+ - no password required
+ - no password expiration
+ - no password re-use restrictions
+ - no frequency of password change restrictions
+ - account is locked for 2 minutes after 5 login failures
+ - simple password rules
+ - no account inactivity monitoring
+ The high level:
+ - password required
+ - factory default 'USERID' account password must be changed on next login
+ - force user to change password on first login
+ - password expires in 90 days
+ - password re-use checking enabled (last 5 passwords kept in history)
+ - minimum 24 hours interval between password changes
+ - account is locked for 60 minutes after 5 login failures
+ - complex password rules with 2 degrees of difference from previous password
+ - alert on account inactivity after 120 days
+ - accounts disabled after 180 days of inactivity
+ The custom level:
+ - set the password settings individually under customSecuritySettings
+ The default value is legacy."
+ ::= { accountSecurityManagement 1 }
+
+
+ customSecuritySettings OBJECT IDENTIFIER ::= { accountSecurityManagement 2 }
+
+ loginPasswordRequired OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If enabled, all users require a login password to access the AMM.
+ If disabled, empty password is allowed and complex password rules
+ will be disabled automatically.
+ The default value is disabled."
+ ::= { customSecuritySettings 1 }
+
+ passwordExpirationPeriod OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The number of days before login passwords expire. The minimum
+ value is 1 day and the maximum value is 365 days. The default
+ value is 90 days. A value of 0 disables this option."
+ ::= { customSecuritySettings 2 }
+
+ defaultAdminPasswordExpired OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If enabled, the factory default 'USERID' account password must
+ be changed on next login. The default value is disabled."
+ ::= { customSecuritySettings 3 }
+
+ minimumPasswordReuseCycle OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ onePassword(1),
+ twoPasswords(2),
+ threePasswords(3),
+ fourPasswords(4),
+ fivePasswords(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The number of unique passwords a user must choose before
+ reusing a password. The default value is none."
+ ::= { customSecuritySettings 4 }
+
+ complexPasswordRules OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If enabled, the minimum complexity rules will be enforced for all
+ local login passwords and 'User login password required' rule will be enabled.
+ The rules are as follows:
+ Passwords must be a minimum of eight characters.
+ Passwords must not be a repeat or reverse of the associated login id.
+ Passwords must be no more than three of the same characters used consecutively.
+ Passwords must contain at least three of the following combinations:
+ At least one lower case alphanumeric character.
+ At least one upper case alphanumeric character.
+ At least one numeric character.
+ At least one special character.
+ The default value is disabled."
+ ::= { customSecuritySettings 5 }
+
+ minimumDiffCharsPassword OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ oneChar(1),
+ twoChars(2),
+ threeChars(3),
+ fourChars(4),
+ fiveChars(5),
+ sixChars(6),
+ sevenChars(7),
+ eightChars(8),
+ nineChars(9),
+ tenChars(10),
+ elevenChars(11),
+ twelveChars(12),
+ thirteenChars(13),
+ fourteenChars(14),
+ fifteenChars(15)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The required minimum number of characters in the new password
+ different from the previous password. The default value is 2.
+
+ A SET of this object is ignored until the complexPasswordRules option is enabled
+ and the minimumPasswordReuseCycle is not none(0)"
+ ::= { customSecuritySettings 6 }
+
+ changePasswordFirstAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If enabled, the login user will be forced to change their password on
+ the first access after the account has been established or on
+ the first access after an administrator has changed the password
+ for the user, except for the administrator password for USERID.
+ The default value is disabled."
+ ::= { customSecuritySettings 7 }
+
+ inactivityAlertPeriod OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The period of time in days before generating an alert for a dormant
+ account. This value applies to all login accounts, including the
+ administrator account. The minimum value is 1 day and the maximum
+ value is 365 days. The default value is 0 which disables this option.
+ NOTE: This value must be less than the inactivityAlertDisablePeriod."
+ ::= { customSecuritySettings 8 }
+
+ inactivityAlertDisablePeriod OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The period of time in days before generating an alert and disabling
+ a dormant account. This value applies to all login accounts, excluding
+ the administrator account. The minimum value is 1 day and the maximum
+ value is 365 days. The default value is 0 which disables this option.
+ NOTE: This value must be greater than the inactivityAlertPeriod."
+ ::= { customSecuritySettings 9 }
+
+ lockoutPeriod OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The period of time in minutes that a user is locked out after the
+ maximum number of login failures was reached. The minimum value is
+ is 1 minute and the maximum value is 2880 minutes. The default value
+ is 2 minutes for the Legacy security level and 60 minutes for the
+ High security level. A value of 0 disables this option."
+ ::= { customSecuritySettings 10 }
+
+ maxLoginFailures OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ oneTime(1),
+ twoTimes(2),
+ threeTimes(3),
+ fourTimes(4),
+ fiveTimes(5),
+ sixTimes(6),
+ sevenTimes(7),
+ eightTimes(8),
+ nineTimes(9),
+ tenTimes(10)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum number of login failures before a user account is locked.
+ A value of 0 disables this option. The default value is 5."
+ ::= { customSecuritySettings 11 }
+
+ passwordChangeInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A minimum period of time that user is not able to change
+ their own password. The range of acceptable values will be
+ from 0 to 1440 (or 60 days). A value of 0 disables this
+ option. If the password expiration period is set, it must be
+ greater than the minimum password change interval."
+ ::= { customSecuritySettings 12 }
+
+ -- ***********************************************************************
+ -- Serial Port Configuration
+ -- ***********************************************************************
+ serialPortCfg OBJECT IDENTIFIER ::= { remoteAccessConfig 2 }
+
+ portBaud OBJECT-TYPE
+ SYNTAX INTEGER {
+ baud2400(0),
+ baud4800(1),
+ baud9600(3),
+ baud19200(7),
+ baud38400(15),
+ baud57600(23)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Baud rate for the serial port."
+ ::= { serialPortCfg 1 }
+
+ portParity OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ odd(1),
+ even(3),
+ mark(5),
+ space(7)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Parity setting for the serial port."
+ ::= { serialPortCfg 2 }
+
+ portStopBits OBJECT-TYPE
+ SYNTAX INTEGER {
+ oneStopbit(0),
+ twoOrOnePtFive(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Number of stop bits for the serial port."
+ ::= { serialPortCfg 3 }
+
+
+ -- ********************************************************************************
+ -- Remote Alert Profiles
+ -- ********************************************************************************
+ remoteAlertIds OBJECT IDENTIFIER ::= { remoteAccessConfig 3 }
+
+ remoteAlertIdsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RemoteAlertIdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of remote alert entries.
+ This table lets you configure remote alert recipients.
+ You can define up to 12 unique recipients.
+ NOTE: All selected alert events will be sent to all
+ enabled alert recipients."
+ ::= { remoteAlertIds 1 }
+
+ remoteAlertIdsEntry OBJECT-TYPE
+ SYNTAX RemoteAlertIdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Remote alert entries."
+ INDEX { remoteAlertIdEntryIndex }
+ ::= { remoteAlertIdsTable 1 }
+
+
+ RemoteAlertIdsEntry ::= SEQUENCE {
+ remoteAlertIdEntryIndex INTEGER,
+ remoteAlertIdEntryStatus INTEGER,
+ remoteAlertIdEntryIpOrHostAddress OCTET STRING,
+ remoteAlertIdEntryTextDescription OCTET STRING,
+ remoteAlertIdEntryNotificationType INTEGER,
+ remoteAlertIdEmailAddr OCTET STRING,
+ remoteAlertIdEntrySelectiveAlert INTEGER
+ }
+
+
+ remoteAlertIdEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for remote alert entry."
+ ::= { remoteAlertIdsEntry 1 }
+
+ remoteAlertIdEntryStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ invalid(0),
+ disabledAndValid(1),
+ enabledAndValid(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote alert entry status, invalid means entry
+ not defined yet, disabledAndValid means entry defined
+ but not enabled to send an alert, enabledAndValid means
+ entry defined and enabled to send an alert."
+ ::= { remoteAlertIdsEntry 2 }
+
+ remoteAlertIdEntryIpOrHostAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..50))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A null terminated string that either
+ contains an IP address of the form '1.2.3.4'
+ or a host name (if DNS is enabled) for the
+ alert entry."
+ ::= { remoteAlertIdsEntry 3 }
+
+ remoteAlertIdEntryTextDescription OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..50))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A null terminated string that contains
+ a text description of this entry."
+ ::= { remoteAlertIdsEntry 4 }
+
+ remoteAlertIdEntryNotificationType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ibmDirectorOverLAN(8),
+ snmpOverLan(4),
+ emailOverLan(5)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote alert entry notification method. Types include
+ unknown when the type can't be determined (read-only),
+ ibmDirectorOverLAN for a LAN alert sent over ethernet to
+ IBM director, snmpOverLan for an SNMP alert over ethernet,
+ and emailOverLan for a E-Mail alert over ethernet."
+ ::= { remoteAlertIdsEntry 5 }
+
+ remoteAlertIdEmailAddr OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A null terminated string that contains an
+ E-Mail Address. For example, 'jeb@us.ibm.com'.
+ Used only for an E-mail over LAN or E-Mail over PPP
+ notification type."
+ ::= { remoteAlertIdsEntry 9 }
+
+ remoteAlertIdEntrySelectiveAlert OBJECT-TYPE
+ SYNTAX INTEGER {
+ critOnlyAlerts(0),
+ allAlerts(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote alert entry selective alert setting. A value of
+ critOnlyAlerts will only send critical alerts to this
+ remote alert recipient, a value of allAlerts will send
+ all alerts to this remote alert recipient."
+ ::= { remoteAlertIdsEntry 13 }
+
+ generateTestAlert OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate a Test Alert. This will send a test alert to all configured
+ and enabled remote alert recipients. The text portion of the alert
+ will contain 'Application Posted Alert to MM'.
+
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object."
+ ::= { remoteAlertIds 30 }
+
+ -- ********************************************************************************
+ -- Remote Access Profiles
+ -- ********************************************************************************
+ remoteAccessIds OBJECT IDENTIFIER ::= { remoteAccessConfig 4 }
+
+ remoteAccessIdsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RemoteAccessIdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of remote access profiles.
+
+ This table lets you to configure all login profiles.
+ You can define up to 12 unique profiles.
+
+ NOTE: By default, the management module
+ comes configured with one login profile that allows remote
+ access using a login ID of 'USERID' and a password of 'PASSW0RD'
+ (the 0 is a zero). To avoid a potential security exposure,
+ we strongly recommend that you change this default Login
+ Profile to values of your choice."
+ ::= { remoteAccessIds 1 }
+
+ remoteAccessIdsEntry OBJECT-TYPE
+ SYNTAX RemoteAccessIdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Remote access entries."
+ INDEX { remoteAccessIdEntryIndex }
+ ::= { remoteAccessIdsTable 1 }
+
+
+ RemoteAccessIdsEntry ::= SEQUENCE {
+ remoteAccessIdEntryIndex INTEGER,
+ remoteAccessIdEntryUserId OCTET STRING,
+ remoteAccessIdEntryPassword OCTET STRING,
+ remoteAccessIdEntryEncodedLoginPw OCTET STRING,
+ remoteAccessIdEntryRole OCTET STRING,
+ remoteAccessIdEntryLoggedIn INTEGER,
+ remoteAccessIdEntryLastLogin OCTET STRING,
+ remoteAccessIdEntryPwdCompliant INTEGER,
+ remoteAccessIdEntryPwdExp OCTET STRING,
+ remoteAccessIdEntryDormant INTEGER,
+ remoteAccessIdEntryState INTEGER,
+ remoteAccessIdEntryAction INTEGER,
+ remoteAccessIdEntrySessionCount INTEGER,
+ remoteAccessIdEntryMaxSessions INTEGER
+ }
+
+
+ remoteAccessIdEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for Remote access entry."
+ ::= { remoteAccessIdsEntry 1 }
+
+ remoteAccessIdEntryUserId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..15))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote access entry null terminated string that
+ contains the user-id. It must not be a duplicate of
+ any previously configured ones."
+ ::= { remoteAccessIdsEntry 2 }
+
+ remoteAccessIdEntryPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..15))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote access password. The password must
+ contain at least one alphabetic and one
+ non-alphabetic character and be at least 5
+ characters long, or you can leave the password
+ field blank to set an empty password.
+
+ NOTE: Value returned by the GET command is meaningless
+ for this MIB object."
+ ::= { remoteAccessIdsEntry 3 }
+
+ remoteAccessIdEntryEncodedLoginPw OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..36))
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Used only for configuration save/restore.
+ A null terminated string containing an encoded
+ concatenation of the login ID and password
+ separated by an ':'.
+
+ This object is no longer supported and will return
+ a string of asterisks"
+ ::= { remoteAccessIdsEntry 7 }
+
+ remoteAccessIdEntryRole OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if user has supervisor, operator, or custom access."
+ ::= { remoteAccessIdsEntry 10 }
+
+ remoteAccessIdEntryLoggedIn OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if user is currently logged in or not."
+ ::= { remoteAccessIdsEntry 11 }
+
+ remoteAccessIdEntryLastLogin OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Timestamp for the last successful login by the user."
+ ::= { remoteAccessIdsEntry 12 }
+
+ remoteAccessIdEntryPwdCompliant OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if user complies with all of the password
+ rules currently in effect."
+ ::= { remoteAccessIdsEntry 13 }
+
+ remoteAccessIdEntryPwdExp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of days until the user's current password expires."
+ ::= { remoteAccessIdsEntry 14 }
+
+ remoteAccessIdEntryDormant OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if the user account has been inactive for a
+ specified amount of time based on inactivityAlertDisablePeriod
+ in the customSecuritySettings section."
+ ::= { remoteAccessIdsEntry 15 }
+
+ remoteAccessIdEntryState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ active(1),
+ locked(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the state of the user:
+ Active - normal state
+ Disabled - user cannot use account until enabled by a
+ supervisor or chassis user account manager. An account
+ can get disabled after being dormant for a specified
+ amount of time OR as a result of a supervisor or chassis
+ user account manager disabling it.
+ Locked - account is temporarily locked due to repeated
+ unsuccessful login attempts as specified by lockoutPeriod
+ in the customSecuritySettings section. Account can be
+ unlocked by a supervisor or chassis user account manager
+ OR can be automatically unlocked after the lockoutPeriod expires.
+
+ NOTE: The disable action does not apply to supervisor or chassis
+ user account manager accounts."
+ ::= { remoteAccessIdsEntry 16 }
+
+ remoteAccessIdEntryAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1),
+ unlock(2),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Actions that only a supervisor or chassis user account manager
+ can perform for each user id:
+ Enable - enables an account in the Disabled state
+ Disable - disables an account in the Active or Locked state
+ Unlock - unlock an account in the Locked state
+
+ NOTE: The disable action does not apply to supervisor or chassis
+ user account manager accounts.
+
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object."
+ ::= { remoteAccessIdsEntry 17 }
+
+ remoteAccessIdEntrySessionCount OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of sessions the user is currently logged in to."
+ ::= { remoteAccessIdsEntry 18 }
+
+ remoteAccessIdEntryMaxSessions OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum number of simultaneous active sessions allowed for
+ the user. If the value is 0, this option is disabled. The
+ minimum value is 1 and the maximum value is 20."
+ ::= { remoteAccessIdsEntry 19 }
+
+ -- ********************************************************************************
+
+ remoteAccessUserAuthorityLevelTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RemoteAccessUserAuthorityLevelEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of user authority level profiles."
+ ::= { remoteAccessIds 2 }
+
+ remoteAccessUserAuthorityLevelEntry OBJECT-TYPE
+ SYNTAX RemoteAccessUserAuthorityLevelEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "User authority level entries."
+ INDEX { ualIndex }
+ ::= { remoteAccessUserAuthorityLevelTable 1 }
+
+ RemoteAccessUserAuthorityLevelEntry ::= SEQUENCE {
+ ualIndex INTEGER,
+ ualId OCTET STRING,
+ ualSupervisor INTEGER,
+ ualReadOnly INTEGER,
+ ualAccountManagement INTEGER,
+ ualConsoleAccess INTEGER,
+ ualConsoleAndVirtualMediaAccess INTEGER,
+ ualServerPowerAccess INTEGER,
+ ualAllowClearLog INTEGER,
+ ualAdapterBasicConfig INTEGER,
+ ualAdapterNetworkAndSecurityConfig INTEGER,
+ ualAdapterAdvancedConfig INTEGER
+ }
+
+ ualIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for User Authority Level entry."
+ ::= { remoteAccessUserAuthorityLevelEntry 1 }
+
+ ualId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "User ID"
+ ::= { remoteAccessUserAuthorityLevelEntry 2 }
+
+ ualSupervisor OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has no restrictions."
+ ::= { remoteAccessUserAuthorityLevelEntry 3 }
+
+ ualReadOnly OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has only read-only access, and cannot perform any save, modify,
+ clear, or state affecting operations (e.g. restart MM, restore defaults,
+ upgrade the firmware, etc.)."
+ ::= { remoteAccessUserAuthorityLevelEntry 4 }
+
+ ualAccountManagement OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can add/modify/delete users and change the global login settings in
+ the Login Profiles panel."
+ ::= { remoteAccessUserAuthorityLevelEntry 5 }
+
+ ualConsoleAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can access the remote console."
+ ::= { remoteAccessUserAuthorityLevelEntry 6 }
+
+ ualConsoleAndVirtualMediaAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can access both the remote console and the virtual media feature."
+ ::= { remoteAccessUserAuthorityLevelEntry 7 }
+
+ ualServerPowerAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can access the power on and restart functions for the remote server.
+ These functions are available via the Power/Restart panel."
+ ::= { remoteAccessUserAuthorityLevelEntry 8 }
+
+ ualAllowClearLog OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can clear the event logs. Everyone can look at the
+ event logs, but this particular permission is required to clear the logs."
+ ::= { remoteAccessUserAuthorityLevelEntry 9 }
+
+ ualAdapterBasicConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can modify configuration parameters in the System Settings and Alerts
+ panels."
+ ::= { remoteAccessUserAuthorityLevelEntry 10 }
+
+ ualAdapterNetworkAndSecurityConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can modify configuration parameters in the Security, Network Protocols,
+ Network Interface, Port Assignments, and Serial Port panels."
+ ::= { remoteAccessUserAuthorityLevelEntry 11 }
+
+ ualAdapterAdvancedConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has no restrictions when configuring the adapter. In addition, the
+ user is said to have administrative access to the RSA, meaning that the
+ user can also perform the following advanced functions: firmware upgrades,
+ PXE network boot, restore adapter factory defaults, modify and restore
+ adapter configuration from a configuration file, and restart/reset the
+ adapter."
+ ::= { remoteAccessUserAuthorityLevelEntry 12 }
+
+
+ remoteAccessRBSroleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RemoteAccessRBSroleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of RBS User Role profiles."
+ ::= { remoteAccessIds 3 }
+
+ remoteAccessRBSroleEntry OBJECT-TYPE
+ SYNTAX RemoteAccessRBSroleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "User Role entries."
+ INDEX { roleIndex }
+ ::= { remoteAccessRBSroleTable 1 }
+
+ RemoteAccessRBSroleEntry ::= SEQUENCE {
+ roleIndex INTEGER,
+ roleId OCTET STRING,
+ rbsSupervisor INTEGER,
+ rbsOperator INTEGER,
+ rbsChassisOperator INTEGER,
+ rbsChassisAccountManagement INTEGER,
+ rbsChassisLogManagement INTEGER,
+ rbsChassisConfiguration INTEGER,
+ rbsChassisAdministration INTEGER,
+ rbsBladeOperator INTEGER,
+ rbsBladeRemotePresence INTEGER,
+ rbsBladeConfiguration INTEGER,
+ rbsBladeAdministration INTEGER,
+ rbsSwitchModuleOperator INTEGER,
+ rbsSwitchModuleConfiguration INTEGER,
+ rbsSwitchModuleAdministration INTEGER,
+ rbsBladeRemotePresenseVideo INTEGER, -- deprecated
+ rbsBladeRemotePresenseKVM INTEGER, -- deprecated
+ rbsBladeRemotePresenseRdriveR INTEGER, -- deprecated
+ rbsBladeRemotePresenseRdriveRW INTEGER, -- deprecated
+ rbsChassisRemotePresenseRdoc INTEGER, -- deprecated
+ rbsRemotePresenceSupervisor INTEGER -- deprecated
+ }
+
+
+ roleIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for RBS User Role entry."
+ ::= { remoteAccessRBSroleEntry 1 }
+
+ roleId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "User ID"
+ ::= { remoteAccessRBSroleEntry 2 }
+
+ rbsSupervisor OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has no restrictions."
+ ::= { remoteAccessRBSroleEntry 3 }
+
+ rbsOperator OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has read-only access, and cannot perform
+ any save, modify, clear, or state affecting operations
+ (e.g. restart MM, restore defaults, upgrade the firmware, etc.)."
+ ::= { remoteAccessRBSroleEntry 4 }
+
+ rbsChassisOperator OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has ability to browse status and properties of
+ chassis components (MM, blowers (chassis cooling devices), midplane, power modules,
+ media tray. Ability to backup MM configuration to a file.
+ Saving MM configuration to chassis requires supervisor access."
+ ::= { remoteAccessRBSroleEntry 5 }
+
+
+ rbsChassisAccountManagement OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can add/modify/delete user login profiles. Ability
+ to backup MM configuration to a file. Changing global login
+ settings require chassis configuration authority."
+ ::= { remoteAccessRBSroleEntry 6 }
+
+ rbsChassisLogManagement OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has ability to clear the MM event log, change log
+ policy settings, and backup MM configuration to a file."
+ ::= { remoteAccessRBSroleEntry 7 }
+
+ rbsChassisConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can modify and save any chassis configuration
+ parameter (except user profiles and event log settings).
+ Ability to restore MM factory defaults if the user also has
+ chassis administration permissions. Ability to change the
+ global login settings, SOL configuration, and backup MM
+ configuration to a file."
+ ::= { remoteAccessRBSroleEntry 8 }
+
+ rbsChassisAdministration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has ability to do MM firmware updates, modify chassis
+ LEDs, restore MM factory defaults if the user also has
+ chassis configuration permissions. Ability to restart MM
+ and backup MM configuration to a file."
+ ::= { remoteAccessRBSroleEntry 9 }
+
+ rbsBladeOperator OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has ability to browse status and properties of
+ blades."
+ ::= { remoteAccessRBSroleEntry 10 }
+
+ rbsBladeRemotePresence OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has ability to access the Remote Control web panel
+ and the functions provided on the panel: remote console
+ (KVM) and remote disk. The ability to issue the CLI
+ console command to start an SOL session to a blade will
+ also require this authority."
+ ::= { remoteAccessRBSroleEntry 11 }
+
+ rbsBladeConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can modify and save any blade configuration parameter."
+ ::= { remoteAccessRBSroleEntry 12 }
+
+ rbsBladeAdministration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can power on/off and restart blades, activate
+ standby blades, do firmware updates, and modify blade LEDs."
+ ::= { remoteAccessRBSroleEntry 13 }
+
+ rbsSwitchModuleOperator OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has ability to browse status and properties of
+ I/O Modules, and to ping I/O Modules."
+ ::= { remoteAccessRBSroleEntry 14 }
+
+ rbsSwitchModuleConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can modify the I/O Module IP address, configure
+ I/O Module Advanced Management parameters, and restore
+ factory defaults on an I/O Module. Note that a user
+ requires both I/O Module configuration and I/O Module
+ administration roles in order to be able to launch a telnet
+ or web UI session to an I/O Module, or to restore factory
+ defaults on an I/O Module."
+ ::= { remoteAccessRBSroleEntry 15 }
+
+ rbsSwitchModuleAdministration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can power on/off and restart the I/O Modules,
+ update I/O Module firmware, enable/disable the Fast POST
+ and External Ports of an I/O Module. Note that a user
+ requires both I/O Module configuration and I/O Module
+ administration roles in order to be able to launch a telnet
+ or web UI session to an I/O Module, or to restore factory
+ defaults on an I/O Module."
+ ::= { remoteAccessRBSroleEntry 16 }
+
+ rbsBladeRemotePresenseVideo OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "User can browser Remote Control web panel and remote blade video.
+
+ NOTE: This mib object is deprecated. This level of granularity is available
+ via the LDAP snap-in tool."
+ ::= { remoteAccessRBSroleEntry 17 }
+
+ rbsBladeRemotePresenseKVM OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "User has ability to access the Remote Control web panel
+ and the functions provided on the panel: remote console
+ (KVM) and remote disk.
+
+ NOTE: This mib object is deprecated. This level of granularity is available
+ via the LDAP snap-in tool."
+ ::= { remoteAccessRBSroleEntry 18 }
+
+ rbsBladeRemotePresenseRdriveR OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "User can mount remote blade driver, and have read access only.
+
+ NOTE: This mib object is deprecated. This level of granularity is available
+ via the LDAP snap-in tool."
+ ::= { remoteAccessRBSroleEntry 19 }
+
+ rbsBladeRemotePresenseRdriveRW OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "User can mount remote blade driver and have read/write access.
+
+ NOTE: This mib object is deprecated. This level of granularity is available
+ via the LDAP snap-in tool."
+ ::= { remoteAccessRBSroleEntry 20 }
+
+ rbsChassisRemotePresenseRdoc OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "User has ability to upload/delete own image to RDOC and also
+ can start remote control web panel.
+
+ NOTE: This mib object is deprecated. This level of granularity is available
+ via the LDAP snap-in tool."
+ ::= { remoteAccessRBSroleEntry 21 }
+
+ rbsRemotePresenceSupervisor OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "User has ability to access the Remote Control web panel
+ and the functions provided on the panel: remote console
+ (KVM) and remote driver read/write, upload/delete himself
+ and other's image to RDOC.
+
+ NOTE: This mib object is deprecated. This level of granularity is available
+ via the LDAP snap-in tool."
+ ::= { remoteAccessRBSroleEntry 22 }
+
+ remoteAccessRBSscopeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RemoteAccessRBSscopeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of RBS User Scope profiles."
+ ::= { remoteAccessIds 4 }
+
+ remoteAccessRBSscopeEntry OBJECT-TYPE
+ SYNTAX RemoteAccessRBSscopeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "User Scope entries."
+ INDEX { scopeIndex }
+ ::= { remoteAccessRBSscopeTable 1 }
+
+ RemoteAccessRBSscopeEntry ::= SEQUENCE {
+ scopeIndex INTEGER,
+ scopeId OCTET STRING,
+ rbsChassis INTEGER,
+ rbsBlade1 INTEGER,
+ rbsBlade2 INTEGER,
+ rbsBlade3 INTEGER,
+ rbsBlade4 INTEGER,
+ rbsBlade5 INTEGER,
+ rbsBlade6 INTEGER,
+ rbsBlade7 INTEGER,
+ rbsBlade8 INTEGER,
+ rbsBlade9 INTEGER,
+ rbsBlade10 INTEGER,
+ rbsBlade11 INTEGER,
+ rbsBlade12 INTEGER,
+ rbsBlade13 INTEGER,
+ rbsBlade14 INTEGER,
+ rbsSwitch1 INTEGER,
+ rbsSwitch2 INTEGER,
+ rbsSwitch3 INTEGER,
+ rbsSwitch4 INTEGER,
+ rbsSwitch5 INTEGER,
+ rbsSwitch6 INTEGER,
+ rbsSwitch7 INTEGER,
+ rbsSwitch8 INTEGER,
+ rbsSwitch9 INTEGER,
+ rbsSwitch10 INTEGER
+ }
+
+
+ scopeIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for RBS User Scope Entry."
+ ::= { remoteAccessRBSscopeEntry 1 }
+
+ scopeId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "User ID"
+ ::= { remoteAccessRBSscopeEntry 2 }
+
+ rbsChassis OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the MM and chassis functions."
+ ::= { remoteAccessRBSscopeEntry 3 }
+
+ rbsBlade1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 1."
+ ::= { remoteAccessRBSscopeEntry 4 }
+
+ rbsBlade2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 2."
+ ::= { remoteAccessRBSscopeEntry 5 }
+
+
+ rbsBlade3 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 3."
+ ::= { remoteAccessRBSscopeEntry 6 }
+
+ rbsBlade4 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 4."
+ ::= { remoteAccessRBSscopeEntry 7 }
+
+ rbsBlade5 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 5."
+ ::= { remoteAccessRBSscopeEntry 8 }
+
+ rbsBlade6 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 6."
+ ::= { remoteAccessRBSscopeEntry 9 }
+
+ rbsBlade7 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 7."
+ ::= { remoteAccessRBSscopeEntry 10 }
+
+
+ rbsBlade8 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 8."
+ ::= { remoteAccessRBSscopeEntry 11 }
+
+ rbsBlade9 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 9."
+ ::= { remoteAccessRBSscopeEntry 12 }
+
+ rbsBlade10 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 10."
+ ::= { remoteAccessRBSscopeEntry 13 }
+
+ rbsBlade11 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 11."
+ ::= { remoteAccessRBSscopeEntry 14 }
+
+ rbsBlade12 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 12."
+ ::= { remoteAccessRBSscopeEntry 15 }
+
+
+ rbsBlade13 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 13."
+ ::= { remoteAccessRBSscopeEntry 16 }
+
+ rbsBlade14 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to the blade in slot 14."
+ ::= { remoteAccessRBSscopeEntry 17 }
+
+ rbsSwitch1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 1."
+ ::= { remoteAccessRBSscopeEntry 18 }
+
+ rbsSwitch2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 2."
+ ::= { remoteAccessRBSscopeEntry 19 }
+
+ rbsSwitch3 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 3."
+ ::= { remoteAccessRBSscopeEntry 20 }
+
+ rbsSwitch4 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 4."
+ ::= { remoteAccessRBSscopeEntry 21 }
+
+ rbsSwitch5 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 5."
+ ::= { remoteAccessRBSscopeEntry 22 }
+
+ rbsSwitch6 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 6."
+ ::= { remoteAccessRBSscopeEntry 23 }
+
+ rbsSwitch7 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 7."
+ ::= { remoteAccessRBSscopeEntry 24 }
+
+
+ rbsSwitch8 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 8."
+ ::= { remoteAccessRBSscopeEntry 25 }
+
+ rbsSwitch9 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 9."
+ ::= { remoteAccessRBSscopeEntry 26 }
+
+ rbsSwitch10 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User has access to I/O module 10."
+ ::= { remoteAccessRBSscopeEntry 27 }
+
+ -- ********************************************************************************
+ -- Enable/Disable User Interfaces
+ -- ********************************************************************************
+ userInterfaces OBJECT IDENTIFIER ::= { remoteAccessConfig 5 }
+ cli OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ telnet-only(1),
+ ssh-only(2),
+ enabled(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/Disable CLI access to the MM (telnet and SSH).
+ The value enabled(3) means both telnet and ssh are enabled."
+ ::= { userInterfaces 1 }
+
+ snmp OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ v1-only(1),
+ v3-only(2),
+ enabled(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/Disable SNMP v1 and v3 access to the MM."
+ ::= { userInterfaces 2 }
+
+ tcm OBJECT-TYPE
+ SYNTAX INTEGER (0..20)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/Disable TCM access to the MM.
+ A value of 0 means disabled, any value from 1 to 20 means enabled.
+ NOTE: AMM will provide a max of 20 connections for both
+ Secure TCP Command Mode and TCP Command Mode."
+ ::= { userInterfaces 3 }
+
+ web OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/Disable Web access (HTTP/HTTPS) to the MM.
+
+ NOTE: Disabling web access to the MM will cause all
+ currently active web sessions to disconnect,
+ and you will no longer be able to access the
+ MM management functions using a web browser."
+ ::= { userInterfaces 4 }
+
+ stcm OBJECT-TYPE
+ SYNTAX INTEGER (0..20)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable/Disable STCM access to the MM.
+ A value of 0 means disabled, any value from 1 to 20 means enabled.
+ NOTE: AMM will provide a max of 20 connections for both
+ Secure TCP Command Mode and TCP Command Mode.
+ If no valid server certificate is in place,
+ Secure TCP Command Mode will not be allowed to set to enable."
+ ::= { userInterfaces 5 }
+
+ -- ---------------------------------------------------------- --
+ -- The Remote Access ID SSH Client Authentication Public Key Group
+ -- ---------------------------------------------------------- --
+ mmSshClientAuth OBJECT IDENTIFIER ::= { remoteAccessConfig 6 }
+
+ mmSshClientAuthPubKeyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmSshClientAuthPubKeyEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table that contains client authentication
+ public key information."
+ ::= { mmSshClientAuth 1 }
+
+ mmSshClientAuthPubKeyEntry OBJECT-TYPE
+ SYNTAX MmSshClientAuthPubKeyEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A information list about a particular SSH
+ public key used for client authentication.
+ The primary table index is the same value as
+ the associated remoteAccessIdEntryIndex.
+ The secondary table index allows selection
+ of the Nth public key for that
+ remoteAccessIdEntryIndex."
+ INDEX { mmSshClientAuthRemoteAccessIdIndex ,
+ mmSshClientAuthPubKeyIndex }
+ ::= { mmSshClientAuthPubKeyTable 1 }
+
+ MmSshClientAuthPubKeyEntry ::=
+ SEQUENCE {
+ mmSshClientAuthRemoteAccessIdIndex INTEGER,
+ mmSshClientAuthPubKeyIndex INTEGER,
+ mmSshClientAuthPubKeyType INTEGER,
+ mmSshClientAuthPubKeySize INTEGER,
+ mmSshClientAuthPubKeyFingerprint OCTET STRING,
+ mmSshClientAuthPubKeyAcceptFrom OCTET STRING,
+ mmSshClientAuthPubKeyComment OCTET STRING,
+ mmSshClientAuthPubKeyAction INTEGER,
+ mmSshClientAuthPubKeyEntryStatus EntryStatus
+ }
+
+ mmSshClientAuthRemoteAccessIdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The primary table index is the same value as
+ the associated remoteAccessIdEntryIndex used
+ as an index into the remoteAccessIdsTable."
+ ::= { mmSshClientAuthPubKeyEntry 1 }
+
+ mmSshClientAuthPubKeyIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The secondary table index used to select
+ one of the client authentication public
+ keys for a particular remote access Id.
+ The index is an integer value from 1 to N
+ where N is the number of keys associated
+ with a particular remote access Id.
+ An addition always causes the value of N to increase
+ by one, effectively adding an entry after the
+ existing keys for that remote access Id.
+ If an entry is deleted from the table by
+ setting mmSshClientAuthPubKeyEntryStatus = invalid,
+ the key associated with that entry is deleted.
+ If the deleted key was not the last key for
+ a remote access Id (mmSshClientAuthPubKeyIndex is
+ not the 'last' or Nth entry), the subsequent entries
+ are renumbered after the deletion. A deletion
+ always causes the value of N to decrease by one.
+ The underlying SSH server implementation searches
+ the keys in order from 1 to N when attempting public
+ key authentication.
+
+ NOTE:A maximum of 4 public keys can be installed
+ for one remote access Id."
+ ::= { mmSshClientAuthPubKeyEntry 2 }
+
+ mmSshClientAuthPubKeyType OBJECT-TYPE
+ SYNTAX INTEGER {
+ sshDss (1),
+ sshRsa (2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The type of the SSH public key represented by
+ this entry."
+ ::= { mmSshClientAuthPubKeyEntry 3 }
+
+ mmSshClientAuthPubKeySize OBJECT-TYPE
+ SYNTAX INTEGER {
+ bits512 (1),
+ bits768 (2),
+ bits1024 (3),
+ bits2048 (4),
+ bits4096 (5)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The size of the SSH public key represented by
+ this entry."
+ ::= { mmSshClientAuthPubKeyEntry 4 }
+
+ mmSshClientAuthPubKeyFingerprint OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RSA fingerprint of the SSH public key represented
+ by this entry.
+ This value can be used with the SSH client to
+ verify, on the initial connection, that the Secure Shell
+ server responding to the request is the server running
+ on the managed entity. This is the fingerprint of the
+ operational host key pair. If the key pair represented
+ by this entry is not operational then sixteen null octets
+ must be returned."
+ ::= { mmSshClientAuthPubKeyEntry 5 }
+
+ mmSshClientAuthPubKeyAcceptFrom OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is a filter that describes the set of SSH client
+ IP addresses and host names that can establish
+ SSH connections to the AMM authenticated by the public key
+ represented by this entry of the table. The filter is a
+ comma-separated list of IP addresses and/or hostnames.
+ A question mark may be used to match any single character.
+ An asterisk may be used to match multiple characters.
+ An exclamation point may preceed an IP address or hostname
+ to deny acccess from that IP address or hostname.
+
+ The format of the Accept From specification is:
+ from=PATTERN-LIST
+ PATTERN-LIST is the filter, which must be enclosed in
+ double quotation marks.
+
+ NOTE:This MIB object can be manipulated after the
+ corresponding SSH public key is installed."
+ ::= { mmSshClientAuthPubKeyEntry 6 }
+
+ mmSshClientAuthPubKeyComment OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is a descriptive string that the administrator may
+ use to help identify the public key represented by this entry.
+ It serves no function in the operation of the SSH server.
+
+ NOTE:This MIB object can be manipulated after the
+ corresponding SSH public key is installed."
+ ::= { mmSshClientAuthPubKeyEntry 7 }
+
+ mmSshClientAuthPubKeyAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ import(1),
+ export(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "import(1) starts the TFTP file transfer of an SSH
+ client authentication public key from the TFTP
+ server to the AMM. The import operation is only
+ accepted if the associated RemoteAccessIdsEntry row
+ is configured and the current value of
+ mmSshClientAuthPubKeyEntryStatus is underCreation(3)
+ or valid(1), if the current value of mmSshClientAuthPubKeyEntryStatus
+ is valid(1), it will replace the key with a new key,
+ If the import is successful the value of
+ mmSshClientAuthPubKeyRowStatus changes to valid(1).
+ export(2) starts the TFTP file transfer of an SSH
+ client authentication public key from the AMM to the TFTP
+ server. The export operation is only accepted if
+ the current value of mmSshClientAuthPubKeyEntryStatus
+ is valid(1).
+
+ NOTE: Users should compare the fingerprint value
+ mmSshClientAuthPubKeyFingerprint to the
+ fingerprint of client authentication key files
+ imported or exported using the TFTP file transfer
+ protocol to guard against possible file corruption.
+
+ Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { mmSshClientAuthPubKeyEntry 8 }
+
+ mmSshClientAuthPubKeyEntryStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object manages the creation and deletion of this entry.
+ The steps recommended to install and to activate a new client
+ authorization public key are:
+ 1. Set values for mmSshClientAuthPubKeyTftpServer,
+ mmSshClientAuthPubKeyFileName, mmSshClientAuthPubKeyFileFormat
+ 2. Create a new entry in this table
+ mmSshClientAuthPubKeyEntryStatus = createRequest
+ 3. Import a new key mmSshClientAuthPubKeyAction = import
+ This entry will be valid after mmSshClientAuthPubKeyAction
+ is successfully imported.
+ 4. Set mmSshClientAuthPubKeyAcceptFrom and
+ mmSshClientAuthPubKeyComment as required.
+
+ valid(1) - Indicates that the public key pair represented
+ by this entry is available for use by the Secure
+ Shell Server for client authentication.
+
+ createRequest(2) - A new entry will be created in this table
+ for the specified host key pair and the new
+ entry will transition to the underCreation(3)
+ state. The operation is only accepted if the
+ associated RemoteAccessIdsEntry row defining
+ a local user account is configured.
+
+ underCreation(3) - Indicates that this entry exists in the
+ agent but is unavailable for use. After completing the
+ create operation, the agent will set this object to
+ underCreation(3).
+
+ invalid(4) - Deletes this entry and any client authentication
+ public key that may be associated with it."
+ ::= { mmSshClientAuthPubKeyEntry 9 }
+
+ mmSshClientAuthPubKeyUnused OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of available storage locations that may be
+ used to install additional Client Authentication
+ Public Keys. This number decreases by one when a new
+ key is added to the configuration."
+ ::= { mmSshClientAuth 2 }
+
+ mmSshClientAuthPubKeyTftpServer OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP address or host name of the TFTP server where an SSH client
+ authentication public key is to be installed from or exported
+ to. The address must be entered in a dotted decimal
+ IP string (e.g. 9.37.44.2)."
+ ::= { mmSshClientAuth 3 }
+
+ mmSshClientAuthPubKeyFileName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "File name on the TFTP server of an SSH client
+ authentication public key."
+ ::= { mmSshClientAuth 4 }
+
+ mmSshClientAuthPubKeyFileFormat OBJECT-TYPE
+ SYNTAX INTEGER {
+ openSSH (1),
+ rfc4716 (2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "File format of SSH client authentication public key files
+ imported from or exported to the TFTP file server."
+ ::= { mmSshClientAuth 5 }
+
+ -- ********************************************************************************
+ -- Group Profiles for LDAP Users
+ -- ********************************************************************************
+ groupProfiles OBJECT IDENTIFIER ::= { remoteAccessConfig 7 }
+ groupIdsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GroupIdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Group profiles.
+
+ This table lets you to configure all group profiles.
+ You can define up to 16 unique profiles."
+ ::= { groupProfiles 1 }
+
+ groupIdsEntry OBJECT-TYPE
+ SYNTAX GroupIdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Group ID entries."
+ INDEX { groupIndex }
+ ::= { groupIdsTable 1 }
+
+
+ GroupIdsEntry ::= SEQUENCE {
+ groupIndex INTEGER,
+ groupId OCTET STRING,
+ groupRole OCTET STRING,
+ groupEntryStatus EntryStatus
+ }
+
+
+ groupIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for Group IDs entry."
+ ::= { groupIdsEntry 1 }
+
+ groupId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group ID. It is a null terminated string that contains the group-id.
+ It must not be a duplicate of any previously configured ones."
+ ::= { groupIdsEntry 2 }
+
+
+ groupRole OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Group Role. It indicates if the group has supervisor, operator,
+ or custom access."
+ ::= { groupIdsEntry 3 }
+
+ groupEntryStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object manages the creation and deletion of this entry.
+ The steps recommended to add a new group are:
+ 1. Create a new entry in this table
+ groupEntryStatus = createRequest
+ 2. Set groupId as required.
+ Then the entry will be valid.
+
+ valid(1) - Indicates that the group represented
+ by this entry is available for use.
+
+ createRequest(2) - A new entry will be created in this table
+ for the specified group and the new entry
+ will transition to the underCreation(3).
+
+ underCreation(3) - Indicates that this entry exists in the
+ agent but is unavailable for use. After completing the
+ create operation, the agent will set this object to
+ underCreation(3).
+
+ invalid(4) - Deletes this entry."
+ ::= { groupIdsEntry 9 }
+
+ groupRBSroleTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GroupRBSroleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Group Role profiles."
+ ::= { groupProfiles 2 }
+
+ groupRBSroleEntry OBJECT-TYPE
+ SYNTAX GroupRBSroleEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Group Role entries."
+ INDEX { groupRBSroleIndex }
+ ::= { groupRBSroleTable 1 }
+
+ GroupRBSroleEntry ::= SEQUENCE {
+ groupRBSroleIndex INTEGER,
+ groupRBSroleId OCTET STRING,
+ groupRBSSupervisor INTEGER,
+ groupRBSOperator INTEGER,
+ groupRBSChassisOperator INTEGER,
+ groupRBSChassisAccountManagement INTEGER,
+ groupRBSChassisLogManagement INTEGER,
+ groupRBSChassisConfiguration INTEGER,
+ groupRBSChassisAdministration INTEGER,
+ groupRBSBladeOperator INTEGER,
+ groupRBSBladeRemotePresence INTEGER,
+ groupRBSBladeConfiguration INTEGER,
+ groupRBSBladeAdministration INTEGER,
+ groupRBSSwitchModuleOperator INTEGER,
+ groupRBSSwitchModuleConfiguration INTEGER,
+ groupRBSSwitchModuleAdministration INTEGER
+ }
+
+
+ groupRBSroleIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for Group Role entry."
+ ::= { groupRBSroleEntry 1 }
+
+ groupRBSroleId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Group ID"
+ ::= { groupRBSroleEntry 2 }
+
+ groupRBSSupervisor OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has no restrictions."
+ ::= { groupRBSroleEntry 3 }
+
+ groupRBSOperator OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has read-only access, and cannot perform
+ any save, modify, clear, or state affecting operations
+ (e.g. restart MM, restore defaults, upgrade the firmware, etc.)."
+ ::= { groupRBSroleEntry 4 }
+
+ groupRBSChassisOperator OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has ability to browse status and properties of
+ chassis components (MM, blowers (chassis cooling devices), midplane, power modules,
+ media tray. Ability to backup MM configuration to a file.
+ Saving MM configuration to chassis requires supervisor access."
+ ::= { groupRBSroleEntry 5 }
+
+
+ groupRBSChassisAccountManagement OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group can add/modify/delete user login profiles. Ability
+ to backup MM configuration to a file. Changing global login
+ settings require chassis configuration authority."
+ ::= { groupRBSroleEntry 6 }
+
+ groupRBSChassisLogManagement OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has ability to clear the MM event log, change log
+ policy settings, and backup MM configuration to a file."
+ ::= { groupRBSroleEntry 7 }
+
+ groupRBSChassisConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group can modify and save any chassis configuration
+ parameter (except user profiles and event log settings).
+ Ability to restore MM factory defaults if the group also has
+ chassis administration permissions. Ability to change the
+ global login settings, SOL configuration, and backup MM
+ configuration to a file."
+ ::= { groupRBSroleEntry 8 }
+
+ groupRBSChassisAdministration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has ability to do MM firmware updates, modify chassis
+ LEDs, restore MM factory defaults if the group also has
+ chassis configuration permissions. Ability to restart MM
+ and backup MM configuration to a file."
+ ::= { groupRBSroleEntry 9 }
+
+ groupRBSBladeOperator OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has ability to browse status and properties of
+ blades."
+ ::= { groupRBSroleEntry 10 }
+
+ groupRBSBladeRemotePresence OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has ability to access the Remote Control web panel
+ and the functions provided on the panel: remote console
+ (KVM) and remote disk. The ability to issue the CLI
+ console command to start an SOL session to a blade will
+ also require this authority."
+ ::= { groupRBSroleEntry 11 }
+
+ groupRBSBladeConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group can modify and save any blade configuration parameter."
+ ::= { groupRBSroleEntry 12 }
+
+ groupRBSBladeAdministration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group can power on/off and restart blades, activate
+ standby blades, do firmware updates, and modify blade LEDs."
+ ::= { groupRBSroleEntry 13 }
+
+ groupRBSSwitchModuleOperator OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has ability to browse status and properties of
+ I/O Modules, and to ping I/O Modules."
+ ::= { groupRBSroleEntry 14 }
+
+ groupRBSSwitchModuleConfiguration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group can modify the I/O Module IP address, configure
+ I/O Module Advanced Management parameters, and restore
+ factory defaults on an I/O Module. Note that a group
+ requires both I/O Module configuration and I/O Module
+ administration roles in order to be able to launch a telnet
+ or web UI session to an I/O Module, or to restore factory
+ defaults on an I/O Module."
+ ::= { groupRBSroleEntry 15 }
+
+ groupRBSSwitchModuleAdministration OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group can power on/off and restart the I/O Modules,
+ update I/O Module firmware, enable/disable the Fast POST
+ and External Ports of an I/O Module. Note that a group
+ requires both I/O Module configuration and I/O Module
+ administration roles in order to be able to launch a telnet
+ or web UI session to an I/O Module, or to restore factory
+ defaults on an I/O Module."
+ ::= { groupRBSroleEntry 16 }
+
+
+ groupRBSscopeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF GroupRBSscopeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Group Scope profiles."
+ ::= { groupProfiles 3 }
+
+ groupRBSscopeEntry OBJECT-TYPE
+ SYNTAX GroupRBSscopeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Group Scope entries."
+ INDEX { groupRBSscopeIndex }
+ ::= { groupRBSscopeTable 1 }
+
+ GroupRBSscopeEntry ::= SEQUENCE {
+ groupRBSscopeIndex INTEGER,
+ groupRBSscopeId OCTET STRING,
+ groupRBSChassis INTEGER,
+ groupRBSBlade1 INTEGER,
+ groupRBSBlade2 INTEGER,
+ groupRBSBlade3 INTEGER,
+ groupRBSBlade4 INTEGER,
+ groupRBSBlade5 INTEGER,
+ groupRBSBlade6 INTEGER,
+ groupRBSBlade7 INTEGER,
+ groupRBSBlade8 INTEGER,
+ groupRBSBlade9 INTEGER,
+ groupRBSBlade10 INTEGER,
+ groupRBSBlade11 INTEGER,
+ groupRBSBlade12 INTEGER,
+ groupRBSBlade13 INTEGER,
+ groupRBSBlade14 INTEGER,
+ groupRBSSwitch1 INTEGER,
+ groupRBSSwitch2 INTEGER,
+ groupRBSSwitch3 INTEGER,
+ groupRBSSwitch4 INTEGER,
+ groupRBSSwitch5 INTEGER,
+ groupRBSSwitch6 INTEGER,
+ groupRBSSwitch7 INTEGER,
+ groupRBSSwitch8 INTEGER,
+ groupRBSSwitch9 INTEGER,
+ groupRBSSwitch10 INTEGER
+ }
+
+
+ groupRBSscopeIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for Group Scope Entry."
+ ::= { groupRBSscopeEntry 1 }
+
+ groupRBSscopeId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Group ID"
+ ::= { groupRBSscopeEntry 2 }
+
+ groupRBSChassis OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the MM and chassis functions."
+ ::= { groupRBSscopeEntry 3 }
+
+ groupRBSBlade1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 1."
+ ::= { groupRBSscopeEntry 4 }
+
+ groupRBSBlade2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 2."
+ ::= { groupRBSscopeEntry 5 }
+
+
+ groupRBSBlade3 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 3."
+ ::= { groupRBSscopeEntry 6 }
+
+ groupRBSBlade4 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 4."
+ ::= { groupRBSscopeEntry 7 }
+
+ groupRBSBlade5 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 5."
+ ::= { groupRBSscopeEntry 8 }
+
+ groupRBSBlade6 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 6."
+ ::= { groupRBSscopeEntry 9 }
+
+ groupRBSBlade7 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 7."
+ ::= { groupRBSscopeEntry 10 }
+
+
+ groupRBSBlade8 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 8."
+ ::= { groupRBSscopeEntry 11 }
+
+ groupRBSBlade9 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 9."
+ ::= { groupRBSscopeEntry 12 }
+
+ groupRBSBlade10 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 10."
+ ::= { groupRBSscopeEntry 13 }
+
+ groupRBSBlade11 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 11."
+ ::= { groupRBSscopeEntry 14 }
+
+ groupRBSBlade12 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 12."
+ ::= { groupRBSscopeEntry 15 }
+
+
+ groupRBSBlade13 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 13."
+ ::= { groupRBSscopeEntry 16 }
+
+ groupRBSBlade14 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to the blade in slot 14."
+ ::= { groupRBSscopeEntry 17 }
+
+ groupRBSSwitch1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 1."
+ ::= { groupRBSscopeEntry 18 }
+
+ groupRBSSwitch2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 2."
+ ::= { groupRBSscopeEntry 19 }
+
+ groupRBSSwitch3 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 3."
+ ::= { groupRBSscopeEntry 20 }
+
+ groupRBSSwitch4 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 4."
+ ::= { groupRBSscopeEntry 21 }
+
+ groupRBSSwitch5 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 5."
+ ::= { groupRBSscopeEntry 22 }
+
+ groupRBSSwitch6 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 6."
+ ::= { groupRBSscopeEntry 23 }
+
+ groupRBSSwitch7 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 7."
+ ::= { groupRBSscopeEntry 24 }
+
+
+ groupRBSSwitch8 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 8."
+ ::= { groupRBSscopeEntry 25 }
+
+ groupRBSSwitch9 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 9."
+ ::= { groupRBSscopeEntry 26 }
+
+ groupRBSSwitch10 OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Group has access to I/O module 10."
+ ::= { groupRBSscopeEntry 27 }
+
+ -- ********************************************************************************
+ -- Remote Alert types
+ -- ********************************************************************************
+ remoteAlerts OBJECT IDENTIFIER ::= { configureSP 2 }
+
+ -- ********************************************************************************
+ -- Remote Alert Critical Error types
+ -- ********************************************************************************
+ remoteAlertsCrit OBJECT IDENTIFIER ::= { remoteAlerts 1 }
+
+ critTemp OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if any of the monitored temperature sensors
+ in the system exceed their critical threshold.
+
+ NOTE: If a critical Temperature condition is detected,
+ the server will automatically be shut down and powered off
+ whether this object is enabled or not.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsCrit 1 }
+
+ critVolt OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate a alert if any of the monitored power supply sensors
+ in the system fall outside their specified critical
+ operational range.
+
+ NOTE: If a critical voltage condition is detected,
+ the server will automatically be shut down and powered off
+ whether this object is enabled or not.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsCrit 2 }
+
+
+ critMultiBlower OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if multiple blowers used for cooling the system fail.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsCrit 4 }
+
+ critPower OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert if any of the system power supplies fail.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsCrit 5 }
+
+ critHardDrive OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if any of hard disk drives fail.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsCrit 6 }
+
+ critVRM OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if any of VRM (voltage regulator modules) fail.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsCrit 7 }
+
+ critMultipleSwitchModule OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if all switch modules fail or are removed.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsCrit 8 }
+
+ critInvalidConfig OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if the hardware configuration is incompatible.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsCrit 9 }
+
+ critBlade OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any critical error condition on a blade.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsCrit 10 }
+
+ critIO OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any critical error condition on I/O module.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsCrit 11 }
+
+ critStorage OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any critical error condition on a Storage module.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { remoteAlertsCrit 12 }
+
+ critChassis OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any critical error condition on chassis.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsCrit 13 }
+
+ critFan OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any critical error condition on cooling devices.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsCrit 14 }
+
+ -- ********************************************************************************
+ -- Remote Alert Warning(non-critical) Error types
+ -- ********************************************************************************
+ remoteAlertsNonCrit OBJECT IDENTIFIER ::= { remoteAlerts 2 }
+
+ warnSingleBlower OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if one blower used for cooling the system fails.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsNonCrit 2 }
+
+ warnTemp OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if any of the monitored temperature sensors
+ in the system exceed their warning threshold.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsNonCrit 3 }
+
+ warnVoltage OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if any of the monitored power supply sensors
+ in the system fall outside their specified warning operational range.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsNonCrit 4 }
+
+ warnRedundantModule OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if any of the switch modules or management
+ modules is failing or removed.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsNonCrit 6 }
+
+ warnMediaTrayKVMSwitch OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if the system detects a Media Tray or KVM
+ switching failure.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsNonCrit 7 }
+
+ warnLogFull OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert if the system log reaches 100% full.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsNonCrit 10 }
+
+ warnBlade OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any warning condition on a blade.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsNonCrit 15 }
+
+ warnIO OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any warning condition on I/O module.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsNonCrit 16 }
+
+ warnStorage OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any warning condition on a Storage module.
+
+ NOTE: This MIB object is for BCS only.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsNonCrit 17 }
+
+ warnPower OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any warning condition on power module.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsNonCrit 18 }
+
+ warnChassis OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any warning condition on chassis.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsNonCrit 19 }
+
+ warnFan OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any warning condition on cooling devices.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsNonCrit 20 }
+
+ -- ********************************************************************************
+ -- Remote Alert System Error types
+ -- ********************************************************************************
+ remoteAlertsSystem OBJECT IDENTIFIER ::= { remoteAlerts 3 }
+
+
+ systemPowerOff OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if the system is powered off.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsSystem 4 }
+
+ systemPowerOn OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate a alert if the system is powered on.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsSystem 5 }
+
+ systemPFA OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate a alert if the system hardware detects a Predictive
+ Failure Analysis(PFA) on PFA enabled hardware.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsSystem 8 }
+
+ systemInventory OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert if the a processor blade or media tray is
+ added or removed.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 10 }
+
+ systemLog75PctFull OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert if the system log reaches 75% full.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 11 }
+
+ networkChangeNotification OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert if the SP has restarted and the internal
+ network has initialized successfully, or if an IP address
+ change via a source other than the management module.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 12 }
+
+ systemBladeThrottling OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if any of the server blades are throttling.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsSystem 13 }
+
+ systemPowerManagement OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Generate an alert if the system detects a power oversubscription
+ condition or power supply mismatch in a power domain.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts."
+ ::= { remoteAlertsSystem 14 }
+
+ systemRemoteLogin OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert if the system detects a new user logged in from
+ a remote site.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 15 }
+
+ systemBlade OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any informational condition on a blade.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 16 }
+
+ systemIO OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any informational condition on I/O module.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 17 }
+
+ systemStorage OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any informational condition on a Storage module.
+
+ NOTE: This MIB object is for BCS only.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 18 }
+
+ systemPower OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any informational condition on power module.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 19 }
+
+ systemChassis OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any informational condition on chassis.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 20}
+
+ systemFan OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any informational condition on cooling device.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 21}
+
+ systemPWRDO OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate an alert for any informational condition on power on and power off.
+
+ NOTE: This object is valid when the alertMode object is
+ set enhanced(1) and should be used for all alert
+ category configuration."
+ ::= { remoteAlertsSystem 22}
+
+ -- Flag to select whether the alert categories function in the legacy mode or
+ -- the enhanced mode.
+
+ alertMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ legacy(0),
+ enhanced(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Selects which alert categories will be displayed on the
+ web interface, which alert category objects are accessible
+ through SNMP, and which SNMP trap type an alert is associated with.
+
+ The enhanced option provides a component based category
+ category scheme and is the only one that is now supported.
+
+ NOTE: The legacy(0) mode alerts should no longer be used
+ and have been deprecated for several releases. They are
+ now also changed to be read-only and any future modifications
+ to the alert category settings must be done only with the
+ enahanced(1) mode alerts. Therefore, this setting should
+ have a value of enhanced(1)."
+
+ ::= { remoteAlerts 4 }
+
+ -- ********************************************************************************
+ -- Users
+ -- ********************************************************************************
+ --
+ users OBJECT IDENTIFIER ::= { monitors 17 }
+
+ -- ********************************************************************************
+ -- MM Users
+ -- ********************************************************************************
+ --
+ mmUsers OBJECT IDENTIFIER ::= { users 1 }
+
+ currentlyLoggedInTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CurrentlyLoggedInEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of MM users currently logged in.
+
+ NOTE: This MIB object is for AMM only."
+ ::= { mmUsers 1 }
+
+ currentlyLoggedInEntry OBJECT-TYPE
+ SYNTAX CurrentlyLoggedInEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "MM users currently logged in entries.
+
+ NOTE: This MIB object is for AMM only."
+ INDEX { currentlyLoggedInEntryIndex }
+ ::= { currentlyLoggedInTable 1 }
+
+ CurrentlyLoggedInEntry ::= SEQUENCE {
+ currentlyLoggedInEntryIndex INTEGER,
+ currentlyLoggedInEntryUserId OCTET STRING,
+ currentlyLoggedInEntryAccMethod OCTET STRING
+ }
+
+ currentlyLoggedInEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for MM users currently logged in."
+
+ ::= { currentlyLoggedInEntry 1 }
+
+ currentlyLoggedInEntryUserId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Name for MM users currently logged in.
+ NOTE: 'Default SNMPv1 user' indicates an internal user used by SNMPv1 agent."
+
+ ::= { currentlyLoggedInEntry 2 }
+
+ currentlyLoggedInEntryAccMethod OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..32))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Access method for MM users currently logged in."
+
+ ::= { currentlyLoggedInEntry 3 }
+
+
+ -- ********************************************************************************
+ -- Front Bezel
+ -- ********************************************************************************
+ frontbezel OBJECT IDENTIFIER ::= { monitors 12 }
+
+ frontbezelExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the front bezel is installed or not.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { frontbezel 1}
+
+
+ -- ********************************************************************************
+ -- Environmental Monitor Thresholds
+ -- ********************************************************************************
+ monitorThresholds OBJECT IDENTIFIER ::= { monitors 20 }
+
+
+
+ -- ********************************************************************************
+ -- Voltage Thresholds
+ -- ********************************************************************************
+ voltageThresholds OBJECT IDENTIFIER ::= { monitorThresholds 2 }
+
+ voltageThresholdsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VoltageThresholdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of voltage threshold entries.
+
+ NOTE: This MIB object is for BladeCenter only."
+ ::= { voltageThresholds 1 }
+
+ voltageThresholdsEntry OBJECT-TYPE
+ SYNTAX VoltageThresholdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage threshold entries.
+
+ NOTE: This MIB object is for BladeCenter only."
+ INDEX { voltageThresholdEntryIndex }
+ ::= { voltageThresholdsTable 1 }
+
+ VoltageThresholdsEntry ::= SEQUENCE {
+ voltageThresholdEntryIndex INTEGER,
+ voltageThresholdEntryName OCTET STRING,
+ voltageThresholdEntryCurrentValue OCTET STRING,
+ voltageThresholdEntryWarningHighValue OCTET STRING,
+ voltageThresholdEntryWarningResetHighValue OCTET STRING,
+ voltageThresholdEntryWarningLowValue OCTET STRING,
+ voltageThresholdEntryWarningResetLowValue OCTET STRING
+ }
+
+
+ voltageThresholdEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for voltage threshold entry."
+
+ ::= { voltageThresholdsEntry 1 }
+
+ voltageThresholdEntryName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage threshold entry null terminated string that
+ contains the power supply's name, for example '+5V'."
+
+ ::= { voltageThresholdsEntry 2 }
+
+ voltageThresholdEntryCurrentValue OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+
+ ::= { voltageThresholdsEntry 3 }
+
+ voltageThresholdEntryWarningHighValue OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage threshold reading expressed in Volts(V).
+ If the voltage rises above this value, a warning
+ alert/event, if enabled, will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+
+ ::= { voltageThresholdsEntry 6 }
+
+ voltageThresholdEntryWarningResetHighValue OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage threshold reading expressed in Volts(V).
+ If the voltage rises above this value and
+ if a warning alert/event had previously been
+ created, then the alert/event will be reset.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+
+ ::= { voltageThresholdsEntry 7 }
+
+ voltageThresholdEntryWarningLowValue OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage threshold reading expressed in Volts(V).
+ If the voltage drops below this value, a warning
+ alert/event, if enabled, will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+
+ ::= { voltageThresholdsEntry 10 }
+
+ voltageThresholdEntryWarningResetLowValue OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage threshold reading expressed in Volts(V).
+ If the voltage drops below this value and
+ if a warning alert/event had previously been
+ created, then the alert/event will be reset.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system."
+
+ ::= { voltageThresholdsEntry 11 }
+
+ -- ********************************************************************************
+ -- Vital Product Data(VPD) information
+ -- ********************************************************************************
+ vpdInformation OBJECT IDENTIFIER ::= { monitors 21 }
+
+ -- ********************************************************************************
+ -- System Firmware Level VPD
+ -- ********************************************************************************
+
+ -- ********************************************************************************
+ -- Machine Level VPD
+ -- ********************************************************************************
+ chassisVpd OBJECT IDENTIFIER ::= { vpdInformation 1 }
+
+
+ bladeCenterVpd OBJECT IDENTIFIER ::= { chassisVpd 1 }
+
+ bladeCenterVpdMachineType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Machine type VPD information (from System BIOS). This field must be four
+ alpha numeric characters."
+ ::= { bladeCenterVpd 1 }
+
+ bladeCenterVpdMachineModel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Machine model VPD information (from System BIOS). This field must be three
+ alpha numeric characters."
+ ::= { bladeCenterVpd 2 }
+
+ bladeCenterSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Machine serial number VPD information (from System BIOS). This field must be
+ seven alpha numeric characters."
+ ::= { bladeCenterVpd 3 }
+
+ bladeCenterUUID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Machine UUID (Universal Unique ID information) (from System BIOS). This field
+ must be 32 alpha numeric characters."
+ ::= { bladeCenterVpd 4 }
+
+ bladeCenterManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis manufacturing ID."
+ ::= { bladeCenterVpd 5 }
+
+ bladeCenterHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis hardware revision.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { bladeCenterVpd 6 }
+
+
+ bladeCenterFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis FRU number."
+ ::= { bladeCenterVpd 7 }
+
+ bladeCenterManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis manufacture date."
+ ::= { bladeCenterVpd 8 }
+
+ bladeCenterPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis part number."
+ ::= { bladeCenterVpd 9 }
+
+ bladeCenterFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis FRU serial number."
+ ::= { bladeCenterVpd 10 }
+
+ bladeCenterManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis manufacturer ID Number."
+ ::= { bladeCenterVpd 11 }
+
+ bladeCenterProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis product ID."
+ ::= { bladeCenterVpd 12 }
+
+ bladeCenterSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis subsystem manufacturer."
+ ::= { bladeCenterVpd 13 }
+
+ bladeCenterClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis Common Language Equipment Identification (CLEI)."
+ ::= { bladeCenterVpd 14 }
+
+ bladeCenterDirectSerialAttach OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Presence of the Direct Serial Attach Module.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bladeCenterVpd 15 }
+
+ bladeCenterHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Machine chassis hardware revision in string format.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { bladeCenterVpd 16 }
+
+ -- ********************************************************************************
+ -- Management Module Hardware VPD
+ -- ********************************************************************************
+ mmHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 2 }
+
+ mmHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the management module hardware components.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpd 1 }
+
+ mmHardwareVpdEntry OBJECT-TYPE
+ SYNTAX MmHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { mmHardwareVpdIndex }
+ ::= { mmHardwareVpdTable 1 }
+
+ MmHardwareVpdEntry ::= SEQUENCE {
+ mmHardwareVpdIndex INTEGER,
+ mmHardwareVpdBayNumber OCTET STRING,
+ mmHardwareVpdManufacturingId OCTET STRING,
+ mmHardwareVpdFruNumber OCTET STRING,
+ mmHardwareVpdHardwareRevision INTEGER,
+ mmHardwareVpdUuid OCTET STRING,
+ mmHardwareVpdManufDate OCTET STRING,
+ mmHardwareVpdPartNumber OCTET STRING,
+ mmHardwareVpdFruSerial OCTET STRING,
+ mmHardwareVpdManufacturingIDNumber OCTET STRING,
+ mmHardwareVpdProductId OCTET STRING,
+ mmHardwareVpdSubManufacturerId OCTET STRING,
+ mmHardwareVpdClei OCTET STRING,
+ mmHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ mmHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 1 }
+
+ mmHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 2 }
+
+ mmHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 3 }
+ mmHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 4 }
+
+
+ mmHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { mmHardwareVpdEntry 5 }
+
+ mmHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 6 }
+
+ mmHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD manufacture date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 7 }
+
+ mmHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD Part number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 8 }
+
+ mmHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 9 }
+
+ mmHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD manufacturer ID Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 10 }
+
+ mmHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 11 }
+
+ mmHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD subsystem manufacturer.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 12 }
+
+ mmHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD Common
+ Language Equipment Identification (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmHardwareVpdEntry 13 }
+
+ mmHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { mmHardwareVpdEntry 14 }
+
+ -- ********************************************************************************
+ -- Management Module Interposer Hardware VPD
+ -- ********************************************************************************
+
+ mmInpHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmInpHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the management module interposer hardware components.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmHardwareVpd 2 }
+
+ mmInpHardwareVpdEntry OBJECT-TYPE
+ SYNTAX MmInpHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD entry.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ INDEX { mmInpHardwareVpdIndex }
+ ::= { mmInpHardwareVpdTable 1 }
+
+ MmInpHardwareVpdEntry ::= SEQUENCE {
+ mmInpHardwareVpdIndex INTEGER,
+ mmInpHardwareVpdBayNumber OCTET STRING,
+ mmInpHardwareVpdManufacturingId OCTET STRING,
+ mmInpHardwareVpdFruNumber OCTET STRING,
+ mmInpHardwareVpdHardwareRevision INTEGER,
+ mmInpHardwareVpdUuid OCTET STRING,
+ mmInpHardwareVpdManufDate OCTET STRING,
+ mmInpHardwareVpdPartNumber OCTET STRING,
+ mmInpHardwareVpdFruSerial OCTET STRING,
+ mmInpHardwareVpdManufacturingIDNumber OCTET STRING,
+ mmInpHardwareVpdProductId OCTET STRING,
+ mmInpHardwareVpdSubManufacturerId OCTET STRING,
+ mmInpHardwareVpdClei OCTET STRING,
+ mmInpHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ mmInpHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD index.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmInpHardwareVpdEntry 1 }
+
+ mmInpHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmInpHardwareVpdEntry 2 }
+
+ mmInpHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmInpHardwareVpdEntry 3 }
+
+ mmInpHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmInpHardwareVpdEntry 4 }
+
+
+ mmInpHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { mmInpHardwareVpdEntry 5 }
+
+ mmInpHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmInpHardwareVpdEntry 6 }
+
+ mmInpHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD manufacture date.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmInpHardwareVpdEntry 7 }
+
+ mmInpHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD Part number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmInpHardwareVpdEntry 8 }
+
+ mmInpHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mmInpHardwareVpdEntry 9 }
+
+ mmInpHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD manufacturer ID Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmInpHardwareVpdEntry 10 }
+
+ mmInpHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmInpHardwareVpdEntry 11 }
+
+ mmInpHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD subsystem manufacturer.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmInpHardwareVpdEntry 12 }
+
+ mmInpHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD Common
+ Language Equipment Identification (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { mmInpHardwareVpdEntry 13 }
+
+ mmInpHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Interposer hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this version of this MIB object should be used."
+ ::= { mmInpHardwareVpdEntry 14 }
+
+ -- ********************************************************************************
+ -- System Firmware Level VPD
+ -- ********************************************************************************
+ mmFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 3 }
+
+ -- ********************************************************************************
+ -- MM Firmware VPD
+ -- ********************************************************************************
+ mmMainApplVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmMainApplVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of MM Firmware VPD."
+ ::= { mmFirmwareVpd 1 }
+
+ mmMainApplVpdEntry OBJECT-TYPE
+ SYNTAX MmMainApplVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "MM Firmware VPD entry."
+ INDEX { mmMainApplVpdIndex }
+ ::= { mmMainApplVpdTable 1 }
+
+
+ MmMainApplVpdEntry ::= SEQUENCE {
+ mmMainApplVpdIndex INTEGER,
+ mmMainApplVpdName OCTET STRING,
+ mmMainApplVpdBuildId OCTET STRING,
+ mmMainApplVpdRevisonNumber OCTET STRING,
+ mmMainApplVpdFilename OCTET STRING,
+ mmMainApplVpdBuildDate OCTET STRING
+ }
+
+
+ mmMainApplVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Firmware VPD index."
+ ::= { mmMainApplVpdEntry 1 }
+
+ mmMainApplVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Firmware VPD name description.
+ 'AMM firmware' indicates the running firmware of the MM.
+ 'AMM firmware (pending restart)' indicates the flashed
+ firmware of the MM which will become active after the
+ next restart."
+ ::= { mmMainApplVpdEntry 2 }
+
+ mmMainApplVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Firmware VPD build identification."
+ ::= { mmMainApplVpdEntry 3 }
+
+ mmMainApplVpdRevisonNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Firmware VPD revision number."
+ ::= { mmMainApplVpdEntry 4 }
+
+ mmMainApplVpdFilename OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Firmware VPD file name."
+ ::= { mmMainApplVpdEntry 5 }
+
+ mmMainApplVpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Firmware VPD build date."
+ ::= { mmMainApplVpdEntry 6 }
+
+ -- ********************************************************************************
+ -- MM Firmware VPD
+ -- ********************************************************************************
+ mmBootROMVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmBootROMVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Table of MM Firmware VPD.
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This table is deprecated and no longer supported."
+ ::= { mmFirmwareVpd 2 }
+
+ mmBootROMVpdEntry OBJECT-TYPE
+ SYNTAX MmBootROMVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "MM Firmware VPD entry.
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This table is deprecated and no longer supported."
+ INDEX { mmBootROMVpdIndex }
+ ::= { mmBootROMVpdTable 1 }
+
+
+ MmBootROMVpdEntry ::= SEQUENCE {
+ mmBootROMVpdIndex INTEGER, --deprecated
+ mmBootROMVpdName OCTET STRING, --deprecated
+ mmBootROMVpdBuildId OCTET STRING, --deprecated
+ mmBootROMVpdRevisonNumber OCTET STRING, --deprecated
+ mmBootROMVpdFilename OCTET STRING, --deprecated
+ mmBootROMVpdBuildDate OCTET STRING --deprecated
+ }
+
+
+ mmBootROMVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD index.
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBootROMVpdEntry 1 }
+
+ mmBootROMVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD name description.
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBootROMVpdEntry 2 }
+
+ mmBootROMVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD build identification.
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBootROMVpdEntry 3 }
+
+ mmBootROMVpdRevisonNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD revision number.
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBootROMVpdEntry 4 }
+
+ mmBootROMVpdFilename OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD file name.
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBootROMVpdEntry 5 }
+
+ mmBootROMVpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD build date.
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmBootROMVpdEntry 6 }
+
+
+ -- ********************************************************************************
+ -- MM Firmware VPD
+ -- ********************************************************************************
+ mmRemoteControlVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmRemoteControlVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Table of MM Firmware VPD.
+ NOTE: This MIB object is for MM only.
+ NOTE: This table is deprecated and no longer supported."
+ ::= { mmFirmwareVpd 3 }
+
+ mmRemoteControlVpdEntry OBJECT-TYPE
+ SYNTAX MmRemoteControlVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "MM Firmware VPD entry.
+
+ NOTE: This table is deprecated and no longer supported."
+ INDEX { mmRemoteControlVpdIndex }
+ ::= { mmRemoteControlVpdTable 1 }
+
+
+ MmRemoteControlVpdEntry ::= SEQUENCE {
+ mmRemoteControlVpdIndex INTEGER, --deprecated
+ mmRemoteControlVpdName OCTET STRING, --deprecated
+ mmRemoteControlVpdBuildId OCTET STRING, --deprecated
+ mmRemoteControlVpdRevisonNumber OCTET STRING, --deprecated
+ mmRemoteControlVpdFilename OCTET STRING, --deprecated
+ mmRemoteControlVpdBuildDate OCTET STRING --deprecated
+ }
+
+
+ mmRemoteControlVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD index.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmRemoteControlVpdEntry 1 }
+
+ mmRemoteControlVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD name description.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmRemoteControlVpdEntry 2 }
+
+ mmRemoteControlVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD build identification.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmRemoteControlVpdEntry 3 }
+
+ mmRemoteControlVpdRevisonNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD revision number.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmRemoteControlVpdEntry 4 }
+
+ mmRemoteControlVpdFilename OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD file name.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmRemoteControlVpdEntry 5 }
+
+ mmRemoteControlVpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD build date.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmRemoteControlVpdEntry 6 }
+
+
+ -- ********************************************************************************
+ -- MM Firmware VPD
+ -- ********************************************************************************
+ mmPS2toUSBConvVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmPS2toUSBConvVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Table of MM Firmware VPD.
+ NOTE: This MIB object is for MM only.
+ NOTE: This table is deprecated and no longer supported."
+ ::= { mmFirmwareVpd 4 }
+
+ mmPS2toUSBConvVpdEntry OBJECT-TYPE
+ SYNTAX MmPS2toUSBConvVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "MM Firmware VPD entry.
+ NOTE: This table is deprecated and no longer supported."
+ INDEX { mmPS2toUSBConvVpdIndex }
+ ::= { mmPS2toUSBConvVpdTable 1 }
+
+
+ MmPS2toUSBConvVpdEntry ::= SEQUENCE {
+ mmPS2toUSBConvVpdIndex INTEGER, --deprecated
+ mmPS2toUSBConvVpdName OCTET STRING, --deprecated
+ mmPS2toUSBConvVpdBuildId OCTET STRING, --deprecated
+ mmPS2toUSBConvVpdRevisonNumber OCTET STRING, --deprecated
+ mmPS2toUSBConvVpdFilename OCTET STRING, --deprecated
+ mmPS2toUSBConvVpdBuildDate OCTET STRING --deprecated
+ }
+
+
+ mmPS2toUSBConvVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD index.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmPS2toUSBConvVpdEntry 1 }
+
+ mmPS2toUSBConvVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD name description.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmPS2toUSBConvVpdEntry 2 }
+
+ mmPS2toUSBConvVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD build identification.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmPS2toUSBConvVpdEntry 3 }
+
+ mmPS2toUSBConvVpdRevisonNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD revision number.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmPS2toUSBConvVpdEntry 4 }
+
+ mmPS2toUSBConvVpdFilename OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD file name.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmPS2toUSBConvVpdEntry 5 }
+
+ mmPS2toUSBConvVpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD build date.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmPS2toUSBConvVpdEntry 6 }
+
+
+ -- ********************************************************************************
+ -- MM Firmware VPD
+ -- ********************************************************************************
+ mmToUSBIntfVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmToUSBIntfVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Table of MM Firmware VPD.
+ NOTE: This MIB object is for MM only.
+ NOTE: This table is deprecated and no longer supported."
+ ::= { mmFirmwareVpd 5 }
+
+ mmToUSBIntfVpdEntry OBJECT-TYPE
+ SYNTAX MmToUSBIntfVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "MM Firmware VPD entry.
+
+ NOTE: This table is deprecated and no longer supported."
+ INDEX { mmToUSBIntfVpdIndex }
+ ::= { mmToUSBIntfVpdTable 1 }
+
+
+ MmToUSBIntfVpdEntry ::= SEQUENCE {
+ mmToUSBIntfVpdIndex INTEGER, --deprecated
+ mmToUSBIntfVpdName OCTET STRING, --deprecated
+ mmToUSBIntfVpdBuildId OCTET STRING, --deprecated
+ mmToUSBIntfVpdRevisonNumber OCTET STRING, --deprecated
+ mmToUSBIntfVpdFilename OCTET STRING, --deprecated
+ mmToUSBIntfVpdBuildDate OCTET STRING --deprecated
+ }
+
+
+ mmToUSBIntfVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD index.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmToUSBIntfVpdEntry 1 }
+
+ mmToUSBIntfVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD name description.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmToUSBIntfVpdEntry 2 }
+
+ mmToUSBIntfVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD build identification.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmToUSBIntfVpdEntry 3 }
+
+ mmToUSBIntfVpdRevisonNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD revision number.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmToUSBIntfVpdEntry 4 }
+
+ mmToUSBIntfVpdFilename OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD file name.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmToUSBIntfVpdEntry 5 }
+
+ mmToUSBIntfVpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Firmware VPD build date.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { mmToUSBIntfVpdEntry 6 }
+
+ -- ********************************************************************************
+ -- System Component Level VPD Activity log
+ -- ********************************************************************************
+ inventoryManagementActivityVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF InventoryManagementActivityVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of system component hardware VPD activity log.
+ For consistent results, view as a table and not as individual entries."
+ ::= { vpdInformation 22 }
+
+ inventoryManagementActivityVpdEntry OBJECT-TYPE
+ SYNTAX InventoryManagementActivityVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "System component hardware VPD activity log entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { componentLevelActivityVpdIndex }
+ ::= { inventoryManagementActivityVpdTable 1 }
+
+ InventoryManagementActivityVpdEntry ::= SEQUENCE {
+ componentLevelActivityVpdIndex INTEGER,
+ componentLevelActivityVpdFruNumber OCTET STRING,
+ componentLevelActivityVpdSerialNumber OCTET STRING,
+ componentLevelActivityVpdManufacturingId OCTET STRING,
+ componentLevelActivityVpdBayNumber OCTET STRING,
+ componentLevelActivityVpdAction OCTET STRING,
+ componentLevelActivityVpdTimestamp OCTET STRING,
+ componentLevelActivityVpdModuleName OCTET STRING
+ }
+
+ componentLevelActivityVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System component level VPD activity log index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { inventoryManagementActivityVpdEntry 1 }
+
+ componentLevelActivityVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System component level VPD activity log FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { inventoryManagementActivityVpdEntry 2 }
+
+ componentLevelActivityVpdSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System component level VPD activity log serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { inventoryManagementActivityVpdEntry 3 }
+
+ componentLevelActivityVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System component level VPD activity log manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { inventoryManagementActivityVpdEntry 4 }
+
+ componentLevelActivityVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System component level VPD activity log Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { inventoryManagementActivityVpdEntry 5 }
+
+ componentLevelActivityVpdAction OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System component level VPD activity log action (added/removed).
+ For consistent results, view as a table and not as individual entries."
+ ::= {inventoryManagementActivityVpdEntry 9 }
+
+ componentLevelActivityVpdTimestamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System component level VPD activity log timestamp.
+ For consistent results, view as a table and not as individual entries."
+ ::= { inventoryManagementActivityVpdEntry 10 }
+
+ componentLevelActivityVpdModuleName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The module name which this row is associated with.
+ For consistent results, view as a table and not as individual entries."
+ ::= { inventoryManagementActivityVpdEntry 12 }
+
+ -- ********************************************************************************
+ -- Blade Hardware VPD
+ -- ********************************************************************************
+ bladeHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 4 }
+
+ bladeHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of VPD information for the blade hardware components.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpd 1 }
+
+ bladeHardwareVpdEntry OBJECT-TYPE
+ SYNTAX BladeHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { bladeHardwareVpdIndex }
+ ::= { bladeHardwareVpdTable 1 }
+
+ BladeHardwareVpdEntry ::= SEQUENCE {
+ bladeHardwareVpdIndex INTEGER,
+ bladeHardwareVpdBayNumber OCTET STRING,
+ bladeHardwareVpdManufacturingId OCTET STRING,
+ bladeHardwareVpdFruNumber OCTET STRING,
+ bladeHardwareVpdHardwareRevision INTEGER,
+ bladeHardwareVpdSerialNumber OCTET STRING,
+ bladeHardwareVpdMachineType OCTET STRING,
+ bladeHardwareVpdUuid OCTET STRING,
+ bladeHardwareVpdManufDate OCTET STRING,
+ bladeHardwareVpdPartNumber OCTET STRING,
+ bladeHardwareVpdFruSerial OCTET STRING,
+ bladeHardwareVpdMachineModel OCTET STRING,
+ bladeHardwareVpdManufacturingIDNumber OCTET STRING,
+ bladeHardwareVpdProductId OCTET STRING,
+ bladeHardwareVpdSubManufacturerId OCTET STRING,
+ bladeHardwareVpdClei OCTET STRING,
+ bladeHardwareVpdHardwareRevisionString OCTET STRING,
+ bladeDaughterVpdCardType INTEGER,
+ bladeDaughterVpdManufacturingId OCTET STRING,
+ bladeDaughterVpdFruNumber OCTET STRING,
+ bladeDaughterVpdHardwareRevision INTEGER,
+ bladeDaughterVpdSerialNumber OCTET STRING,
+ bladeDaughterVpdMachineType OCTET STRING,
+ bladeDaughterVpdUuid OCTET STRING,
+ bladeDaughterVpdManufDate OCTET STRING,
+ bladeDaughterVpdPartNumber OCTET STRING,
+ bladeDaughterVpdFruSerial OCTET STRING,
+ bladeDaughterVpdManufacturingIDNumber OCTET STRING,
+ bladeDaughterVpdProductId OCTET STRING,
+ bladeDaughterVpdSubManufacturerId OCTET STRING,
+ bladeDaughterVpdClei OCTET STRING,
+ bladeDaughterVpdHardwareRevisionString OCTET STRING
+ }
+
+ bladeHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 1 }
+
+ bladeHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 2 }
+
+ bladeHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 3 }
+
+ bladeHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 4 }
+
+
+ bladeHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { bladeHardwareVpdEntry 5 }
+
+ bladeHardwareVpdSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 6 }
+
+ bladeHardwareVpdMachineType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD machine type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 7 }
+
+ bladeHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 8 }
+
+ bladeHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD Manufacture Date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 9 }
+
+ bladeHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD Part number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 10 }
+
+ bladeHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 11 }
+
+ bladeHardwareVpdMachineModel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD machine model.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 12 }
+
+ bladeHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD Manufacturer ID Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 13 }
+
+ bladeHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 14 }
+
+ bladeHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 15 }
+
+ bladeHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 16 }
+
+ bladeHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { bladeHardwareVpdEntry 17 }
+
+ bladeDaughterVpdCardType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ networkExpansion(1),
+ storageExpansion(2),
+ pciExpansion(3),
+ genericExpansion(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 20 }
+
+ bladeDaughterVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 21 }
+
+ bladeDaughterVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 22 }
+
+
+ bladeDaughterVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { bladeHardwareVpdEntry 23 }
+
+ bladeDaughterVpdSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD Serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 24 }
+
+ bladeDaughterVpdMachineType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD Machine type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 25 }
+
+ bladeDaughterVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 26 }
+
+ bladeDaughterVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD Manufacture date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 27 }
+
+ bladeDaughterVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD Part number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 28 }
+
+ bladeDaughterVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD FRU Serial.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 29 }
+
+ bladeDaughterVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD manufacturer ID Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 30 }
+
+ bladeDaughterVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 31 }
+
+ bladeDaughterVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD subsystem manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 32 }
+
+ bladeDaughterVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD
+ Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpdEntry 33 }
+
+ bladeDaughterVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { bladeHardwareVpdEntry 34 }
+
+ -- ********************************************************************************
+ -- Blade MAC Address VPD
+ -- ********************************************************************************
+
+ bladeMACAddressVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeMACAddressVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of MAC addresses of the blade and its expansion cards (daughter cards).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpd 2 }
+
+ bladeMACAddressVpdEntry OBJECT-TYPE
+ SYNTAX BladeMACAddressVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { bladeMACAddressVpdIndex }
+ ::= { bladeMACAddressVpdTable 1 }
+
+
+ BladeMACAddressVpdEntry ::= SEQUENCE {
+ bladeMACAddressVpdIndex INTEGER,
+ bladeMACAddress1Vpd OCTET STRING,
+ bladeMACAddress2Vpd OCTET STRING,
+ bladeMACAddress3Vpd OCTET STRING,
+ bladeMACAddress4Vpd OCTET STRING,
+ bladeMACAddress5Vpd OCTET STRING,
+ bladeMACAddress6Vpd OCTET STRING,
+ bladeMACAddress7Vpd OCTET STRING,
+ bladeMACAddress8Vpd OCTET STRING,
+ bladeDaughterCard1MACAddress1Vpd OCTET STRING,
+ bladeDaughterCard1MACAddress2Vpd OCTET STRING,
+ bladeDaughterCard1MACAddress3Vpd OCTET STRING,
+ bladeDaughterCard1MACAddress4Vpd OCTET STRING,
+ bladeDaughterCard1MACAddress5Vpd OCTET STRING,
+ bladeDaughterCard1MACAddress6Vpd OCTET STRING,
+ bladeDaughterCard1MACAddress7Vpd OCTET STRING,
+ bladeDaughterCard1MACAddress8Vpd OCTET STRING,
+ bladeDaughterCard2MACAddress1Vpd OCTET STRING,
+ bladeDaughterCard2MACAddress2Vpd OCTET STRING,
+ bladeDaughterCard2MACAddress3Vpd OCTET STRING,
+ bladeDaughterCard2MACAddress4Vpd OCTET STRING,
+ bladeDaughterCard2MACAddress5Vpd OCTET STRING,
+ bladeDaughterCard2MACAddress6Vpd OCTET STRING,
+ bladeDaughterCard2MACAddress7Vpd OCTET STRING,
+ bladeDaughterCard2MACAddress8Vpd OCTET STRING,
+ bladeDaughterCard3MACAddress1Vpd OCTET STRING,
+ bladeDaughterCard3MACAddress2Vpd OCTET STRING,
+ bladeDaughterCard3MACAddress3Vpd OCTET STRING,
+ bladeDaughterCard3MACAddress4Vpd OCTET STRING,
+ bladeDaughterCard3MACAddress5Vpd OCTET STRING,
+ bladeDaughterCard3MACAddress6Vpd OCTET STRING,
+ bladeDaughterCard3MACAddress7Vpd OCTET STRING,
+ bladeDaughterCard3MACAddress8Vpd OCTET STRING,
+ bladeDaughterCard4MACAddress1Vpd OCTET STRING,
+ bladeDaughterCard4MACAddress2Vpd OCTET STRING,
+ bladeDaughterCard4MACAddress3Vpd OCTET STRING,
+ bladeDaughterCard4MACAddress4Vpd OCTET STRING,
+ bladeDaughterCard4MACAddress5Vpd OCTET STRING,
+ bladeDaughterCard4MACAddress6Vpd OCTET STRING,
+ bladeDaughterCard4MACAddress7Vpd OCTET STRING,
+ bladeDaughterCard4MACAddress8Vpd OCTET STRING,
+ bladeDaughterCard5MACAddress1Vpd OCTET STRING,
+ bladeDaughterCard5MACAddress2Vpd OCTET STRING,
+ bladeDaughterCard5MACAddress3Vpd OCTET STRING,
+ bladeDaughterCard5MACAddress4Vpd OCTET STRING,
+ bladeDaughterCard5MACAddress5Vpd OCTET STRING,
+ bladeDaughterCard5MACAddress6Vpd OCTET STRING,
+ bladeDaughterCard5MACAddress7Vpd OCTET STRING,
+ bladeDaughterCard5MACAddress8Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress1Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress2Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress3Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress4Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress5Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress6Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress7Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress8Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress9Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress10Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress11Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress12Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress13Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress14Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress15Vpd OCTET STRING,
+ bladeHSDaughterCard1MACAddress16Vpd OCTET STRING,
+ bladeSideCardMACAddress1Vpd OCTET STRING,
+ bladeSideCardMACAddress2Vpd OCTET STRING,
+ bladeSideCardMACAddress3Vpd OCTET STRING,
+ bladeSideCardMACAddress4Vpd OCTET STRING,
+ bladeSideCardMACAddress5Vpd OCTET STRING,
+ bladeSideCardMACAddress6Vpd OCTET STRING,
+ bladeSideCardMACAddress7Vpd OCTET STRING,
+ bladeSideCardMACAddress8Vpd OCTET STRING
+ }
+
+ bladeMACAddressVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 1 }
+
+ bladeMACAddress1Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 2 }
+
+ bladeMACAddress2Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 3 }
+
+ bladeMACAddress3Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 4 }
+
+ bladeMACAddress4Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 5 }
+
+ bladeMACAddress5Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 6 }
+
+ bladeMACAddress6Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 7 }
+
+ bladeMACAddress7Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 8 }
+
+ bladeMACAddress8Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade MAC address 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 9 }
+
+ bladeDaughterCard1MACAddress1Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 1 MAC address 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 10 }
+
+ bladeDaughterCard1MACAddress2Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 1 MAC address 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 11 }
+
+ bladeDaughterCard1MACAddress3Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 1 MAC address 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 12 }
+
+ bladeDaughterCard1MACAddress4Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 1 MAC address 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 13 }
+
+ bladeDaughterCard1MACAddress5Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 1 MAC address 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 14 }
+
+ bladeDaughterCard1MACAddress6Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 1 MAC address 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 15 }
+
+ bladeDaughterCard1MACAddress7Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 1 MAC address 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 16 }
+
+ bladeDaughterCard1MACAddress8Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 1 MAC address 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 17 }
+
+ bladeDaughterCard2MACAddress1Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 2 MAC address 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 18 }
+
+ bladeDaughterCard2MACAddress2Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 2 MAC address 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 19 }
+
+ bladeDaughterCard2MACAddress3Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 2 MAC address 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 20 }
+
+ bladeDaughterCard2MACAddress4Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 2 MAC address 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 21 }
+
+ bladeDaughterCard2MACAddress5Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 2 MAC address 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 22 }
+
+ bladeDaughterCard2MACAddress6Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 2 MAC address 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 23 }
+
+ bladeDaughterCard2MACAddress7Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 2 MAC address 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 24 }
+
+ bladeDaughterCard2MACAddress8Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 2 MAC address 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 25 }
+
+ bladeDaughterCard3MACAddress1Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 3 MAC address 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 26 }
+
+ bladeDaughterCard3MACAddress2Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 3 MAC address 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 27 }
+
+ bladeDaughterCard3MACAddress3Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 3 MAC address 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 28 }
+
+ bladeDaughterCard3MACAddress4Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 3 MAC address 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 29 }
+
+ bladeDaughterCard3MACAddress5Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 3 MAC address 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 30 }
+
+ bladeDaughterCard3MACAddress6Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 3 MAC address 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 31 }
+
+ bladeDaughterCard3MACAddress7Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 3 MAC address 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 32 }
+
+ bladeDaughterCard3MACAddress8Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 3 MAC address 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 33 }
+
+ bladeDaughterCard4MACAddress1Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 4 MAC address 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 34 }
+
+ bladeDaughterCard4MACAddress2Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 4 MAC address 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 35 }
+
+ bladeDaughterCard4MACAddress3Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 4 MAC address 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 36 }
+
+ bladeDaughterCard4MACAddress4Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 4 MAC address 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 37 }
+
+ bladeDaughterCard4MACAddress5Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 4 MAC address 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 38 }
+
+ bladeDaughterCard4MACAddress6Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 4 MAC address 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 39 }
+
+ bladeDaughterCard4MACAddress7Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 4 MAC address 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 40 }
+
+ bladeDaughterCard4MACAddress8Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 4 MAC address 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 41 }
+
+ bladeDaughterCard5MACAddress1Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 5 MAC address 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 42 }
+
+ bladeDaughterCard5MACAddress2Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 5 MAC address 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 43 }
+
+ bladeDaughterCard5MACAddress3Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 5 MAC address 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 44}
+
+ bladeDaughterCard5MACAddress4Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 5 MAC address 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 45 }
+
+ bladeDaughterCard5MACAddress5Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 5 MAC address 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 46 }
+
+ bladeDaughterCard5MACAddress6Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 5 MAC address 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 47 }
+
+ bladeDaughterCard5MACAddress7Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 5 MAC address 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 48 }
+
+ bladeDaughterCard5MACAddress8Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) 5 MAC address 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 49 }
+
+ bladeHSDaughterCard1MACAddress1Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 100 }
+
+ bladeHSDaughterCard1MACAddress2Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 101 }
+
+ bladeHSDaughterCard1MACAddress3Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 102}
+
+ bladeHSDaughterCard1MACAddress4Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 103 }
+
+ bladeHSDaughterCard1MACAddress5Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 104 }
+
+ bladeHSDaughterCard1MACAddress6Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 105 }
+
+ bladeHSDaughterCard1MACAddress7Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 106 }
+
+ bladeHSDaughterCard1MACAddress8Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 107 }
+
+ bladeHSDaughterCard1MACAddress9Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 9.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 108 }
+
+ bladeHSDaughterCard1MACAddress10Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 10.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 109 }
+
+ bladeHSDaughterCard1MACAddress11Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 11.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 110 }
+
+ bladeHSDaughterCard1MACAddress12Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 12.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 111 }
+
+ bladeHSDaughterCard1MACAddress13Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 13.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 112 }
+
+ bladeHSDaughterCard1MACAddress14Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 14.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 113 }
+
+ bladeHSDaughterCard1MACAddress15Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 15.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 114 }
+
+ bladeHSDaughterCard1MACAddress16Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade high speed expansion card (daughter card) 1 MAC address 16.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 115 }
+
+ bladeSideCardMACAddress1Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card MAC address 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 164 }
+
+ bladeSideCardMACAddress2Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card MAC address 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 165 }
+
+ bladeSideCardMACAddress3Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card MAC address 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 166 }
+
+ bladeSideCardMACAddress4Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card MAC address 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 167 }
+
+ bladeSideCardMACAddress5Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card MAC address 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 168 }
+
+ bladeSideCardMACAddress6Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card MAC address 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 169 }
+
+ bladeSideCardMACAddress7Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card MAC address 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 170 }
+
+ bladeSideCardMACAddress8Vpd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card MAC address 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeMACAddressVpdEntry 171 }
+
+ -- ********************************************************************************
+ -- Blade Expansion Board VPD
+ -- ********************************************************************************
+
+ bladeExpBoardVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeExpBoardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of VPD information for the blade expansion board components.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpd 3 }
+
+ bladeExpBoardVpdEntry OBJECT-TYPE
+ SYNTAX BladeExpBoardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { bladeExpBoardVpdIndex }
+ ::= { bladeExpBoardVpdTable 1 }
+
+ BladeExpBoardVpdEntry ::= SEQUENCE {
+ bladeExpBoardVpdIndex INTEGER,
+ bladeExpBoardVpdBayNumber OCTET STRING,
+ bladeExpBoardVpdManufacturingId OCTET STRING,
+ bladeExpBoardVpdFruNumber OCTET STRING,
+ bladeExpBoardVpdHardwareRevision INTEGER,
+ bladeExpBoardVpdSerialNumber OCTET STRING,
+ bladeExpBoardVpdMachineType OCTET STRING,
+ bladeExpBoardVpdUuid OCTET STRING,
+ bladeExpBoardVpdManufDate OCTET STRING,
+ bladeExpBoardVpdPartNumber OCTET STRING,
+ bladeExpBoardVpdFruSerial OCTET STRING,
+ bladeExpBoardVpdMachineModel OCTET STRING,
+ bladeExpBoardVpdManufacturingIDNumber OCTET STRING,
+ bladeExpBoardVpdProductId OCTET STRING,
+ bladeExpBoardVpdSubManufacturerId OCTET STRING,
+ bladeExpBoardVpdClei OCTET STRING,
+ bladeExpBoardVpdBladeBayNumber OCTET STRING,
+ bladeExpBoardVpdCardType INTEGER,
+ bladeExpBoardVpdCardSubType INTEGER,
+ bladeExpBoardVpdHardwareRevisionString OCTET STRING
+ }
+
+ bladeExpBoardVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 1 }
+
+ bladeExpBoardVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 2 }
+
+ bladeExpBoardVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 3 }
+
+ bladeExpBoardVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 4 }
+
+
+ bladeExpBoardVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { bladeExpBoardVpdEntry 5 }
+
+ bladeExpBoardVpdSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 6 }
+
+ bladeExpBoardVpdMachineType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD machine type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 7 }
+
+ bladeExpBoardVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 8 }
+
+ bladeExpBoardVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD Manufacture Date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 9 }
+
+ bladeExpBoardVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD Part number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 10 }
+
+ bladeExpBoardVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 11 }
+
+ bladeExpBoardVpdMachineModel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD machine model.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 12 }
+
+ bladeExpBoardVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD Manufacturer ID Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 13 }
+
+ bladeExpBoardVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD Product ID.
+ For consistent results, view as a table and
+ not as individual entries."
+ ::= { bladeExpBoardVpdEntry 14 }
+
+ bladeExpBoardVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 15 }
+
+ bladeExpBoardVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 16 }
+
+ bladeExpBoardVpdBladeBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade bay number of the blade expansion board.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 19 }
+
+ bladeExpBoardVpdCardType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ storageExpansion(1),
+ pciExpansion(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 20 }
+
+ bladeExpBoardVpdCardSubType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ bse1(1),
+ bse2(2),
+ bse3(3),
+ peu1(11),
+ peu2(12),
+ peu3(13),
+ bie(21)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD subtype.
+ Describes the expansion board type with more granularity.
+ bse1,bse2,bse3 = Blade Storage Expansion (1st, 2nd, and 3rd Generations),
+ peu1 = PCI Expansion (1st Generation),
+ peu2 = PCI Expansion Unit II,
+ peu3 = bpe3 = PCI Express Expansion Unit,
+ bie= Blade I/O Expansion
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpBoardVpdEntry 21 }
+
+ bladeExpBoardVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion board VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { bladeExpBoardVpdEntry 22 }
+
+ -- ********************************************************************************
+ -- Blade Side Card VPD
+ -- ********************************************************************************
+
+ bladeSideCardVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeSideCardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of VPD information for the blade side card components.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpd 4 }
+
+ bladeSideCardVpdEntry OBJECT-TYPE
+ SYNTAX BladeSideCardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { bladeSideCardVpdIndex }
+ ::= { bladeSideCardVpdTable 1 }
+
+ BladeSideCardVpdEntry ::= SEQUENCE {
+ bladeSideCardVpdIndex INTEGER,
+ bladeSideCardVpdBayNumber OCTET STRING,
+ bladeSideCardVpdManufacturingId OCTET STRING,
+ bladeSideCardVpdFruNumber OCTET STRING,
+ bladeSideCardVpdHardwareRevision INTEGER,
+ bladeSideCardVpdSerialNumber OCTET STRING,
+ bladeSideCardVpdMachineType OCTET STRING,
+ bladeSideCardVpdUuid OCTET STRING,
+ bladeSideCardVpdManufDate OCTET STRING,
+ bladeSideCardVpdPartNumber OCTET STRING,
+ bladeSideCardVpdFruSerial OCTET STRING,
+ bladeSideCardVpdMachineModel OCTET STRING,
+ bladeSideCardVpdManufacturingIDNumber OCTET STRING,
+ bladeSideCardVpdProductId OCTET STRING,
+ bladeSideCardVpdSubManufacturerId OCTET STRING,
+ bladeSideCardVpdClei OCTET STRING,
+ bladeSideCardVpdBladeBayNumber OCTET STRING,
+ bladeSideCardVpdHardwareRevisionString OCTET STRING
+ }
+
+ bladeSideCardVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 1 }
+
+ bladeSideCardVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 2 }
+
+ bladeSideCardVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 3 }
+
+ bladeSideCardVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 4 }
+
+
+ bladeSideCardVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { bladeSideCardVpdEntry 5 }
+
+ bladeSideCardVpdSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 6 }
+
+ bladeSideCardVpdMachineType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD machine type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 7 }
+
+ bladeSideCardVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 8 }
+
+ bladeSideCardVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD Manufacture Date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 9 }
+
+ bladeSideCardVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD Part number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 10 }
+
+ bladeSideCardVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 11 }
+
+ bladeSideCardVpdMachineModel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD machine model.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 12 }
+
+ bladeSideCardVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD Manufacturer ID Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 13 }
+
+ bladeSideCardVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD Product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 14 }
+
+ bladeSideCardVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 15 }
+
+ bladeSideCardVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD Common Language
+ Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 16 }
+
+ bladeSideCardVpdBladeBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade bay number of the blade side card.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeSideCardVpdEntry 19 }
+
+ bladeSideCardVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade side card VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { bladeSideCardVpdEntry 20 }
+
+ -- ********************************************************************************
+ -- Blade Expansion Card VPD
+ -- ********************************************************************************
+
+ bladeExpCardVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeExpCardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of VPD information for the blade expansion card components.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpd 5 }
+
+ bladeExpCardVpdEntry OBJECT-TYPE
+ SYNTAX BladeExpCardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { bladeExpCardVpdIndex }
+ ::= { bladeExpCardVpdTable 1 }
+
+ BladeExpCardVpdEntry ::= SEQUENCE {
+ bladeExpCardVpdIndex INTEGER,
+ bladeExpCardVpdBayNumber OCTET STRING,
+ bladeExpCardVpdManufacturingId OCTET STRING,
+ bladeExpCardVpdFruNumber OCTET STRING,
+ bladeExpCardVpdHardwareRevision INTEGER,
+ bladeExpCardVpdSerialNumber OCTET STRING,
+ bladeExpCardVpdMachineType OCTET STRING,
+ bladeExpCardVpdUuid OCTET STRING,
+ bladeExpCardVpdManufDate OCTET STRING,
+ bladeExpCardVpdPartNumber OCTET STRING,
+ bladeExpCardVpdFruSerial OCTET STRING,
+ bladeExpCardVpdMachineModel OCTET STRING,
+ bladeExpCardVpdManufacturingIDNumber OCTET STRING,
+ bladeExpCardVpdProductId OCTET STRING,
+ bladeExpCardVpdSubManufacturerId OCTET STRING,
+ bladeExpCardVpdClei OCTET STRING,
+ bladeExpCardVpdBladeBayNumber OCTET STRING,
+ bladeExpCardVpdCardTypeInfo INTEGER,
+ bladeExpCardVpdHighSpeed INTEGER,
+ bladeExpCardVpdHardwareRevisionString OCTET STRING
+ }
+
+ bladeExpCardVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 1 }
+
+ bladeExpCardVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 2 }
+
+ bladeExpCardVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 3 }
+
+ bladeExpCardVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 4 }
+
+
+ bladeExpCardVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { bladeExpCardVpdEntry 5 }
+
+ bladeExpCardVpdSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 6 }
+
+ bladeExpCardVpdMachineType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD machine type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 7 }
+
+ bladeExpCardVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 8 }
+
+ bladeExpCardVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD Manufacture Date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 9 }
+
+ bladeExpCardVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD Part number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 10 }
+
+ bladeExpCardVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 11 }
+
+ bladeExpCardVpdMachineModel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD machine model.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 12 }
+
+ bladeExpCardVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD Manufacturer ID Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 13 }
+
+ bladeExpCardVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD Product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 14 }
+
+ bladeExpCardVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 15 }
+
+ bladeExpCardVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 16 }
+
+ bladeExpCardVpdBladeBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade bay number of the blade expansion card.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeExpCardVpdEntry 19 }
+
+ bladeExpCardVpdCardTypeInfo OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ bladeEthernetExpCard(1),
+ bladeFiberChannelExpCard(2),
+ serialPortExpCard(3),
+ bladeOpticalPassThrough(4),
+ bladeInfinibandExpCard(5),
+ bladeIscsiExpCard(6),
+ bladeGenericExpCard(7),
+ bladeNetworkCFFeExpCard(8),
+ bladeSASConnectivityCard(9),
+ bladeSATAConnectivityCard(10),
+ bladeNetworkCFFzExpCard(11),
+ bladeNetworkCNAExpCard(12),
+ bladeSSDExpCard(13),
+ bladePCIExp(14),
+ bladeGraphicsExp(15),
+ bladeIOExp(16),
+ bladeMemoryExp(17),
+ bladeProcessorExp(18),
+ bladeGenericExp(19)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD type code that describes the expansion
+ card. For consistent results, view as a table and not as individual entries.
+
+ NOTE: The CFFe expansion card is also referred to as a CFFh expansion card."
+ ::= { bladeExpCardVpdEntry 21 }
+
+ bladeExpCardVpdHighSpeed OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card (daughter card) VPD high speed that indicates whether the
+ expansion card is high speed or not. For consistent results, view as a table and
+ not as individual entries."
+ ::= { bladeExpCardVpdEntry 22 }
+
+ bladeExpCardVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade expansion card VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { bladeExpCardVpdEntry 23 }
+
+
+ -- ********************************************************************************
+ -- Blade cKVM card VPD
+ -- ********************************************************************************
+
+ bladecKVMCardVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladecKVMCardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of VPD information for the blade
+ concurrent keyboard, video, and mouse (cKVM) card components.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpd 6 }
+
+ bladecKVMCardVpdEntry OBJECT-TYPE
+ SYNTAX BladecKVMCardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard, video, and mouse (cKVM) card VPD entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { bladecKVMCardVpdIndex }
+ ::= { bladecKVMCardVpdTable 1 }
+
+ BladecKVMCardVpdEntry ::= SEQUENCE {
+ bladecKVMCardVpdIndex INTEGER,
+ bladecKVMCardVpdBayNumber OCTET STRING,
+ bladecKVMCardVpdManufacturingId OCTET STRING,
+ bladecKVMCardVpdFruNumber OCTET STRING,
+ bladecKVMCardVpdHardwareRevision INTEGER,
+ bladecKVMCardVpdSerialNumber OCTET STRING,
+ bladecKVMCardVpdMachineType OCTET STRING,
+ bladecKVMCardVpdUuid OCTET STRING,
+ bladecKVMCardVpdManufDate OCTET STRING,
+ bladecKVMCardVpdPartNumber OCTET STRING,
+ bladecKVMCardVpdFruSerial OCTET STRING,
+ bladecKVMCardVpdMachineModel OCTET STRING,
+ bladecKVMCardVpdManufacturingIDNumber OCTET STRING,
+ bladecKVMCardVpdProductId OCTET STRING,
+ bladecKVMCardVpdSubManufacturerId OCTET STRING,
+ bladecKVMCardVpdClei OCTET STRING,
+ bladecKVMCardVpdHardwareRevisionString OCTET STRING
+ }
+
+ bladecKVMCardVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard mouse video (cKVM) card VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 1 }
+
+ bladecKVMCardVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 2 }
+
+ bladecKVMCardVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 3 }
+
+ bladecKVMCardVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 4 }
+
+
+ bladecKVMCardVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { bladecKVMCardVpdEntry 5 }
+
+ bladecKVMCardVpdSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 6 }
+
+ bladecKVMCardVpdMachineType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD machine type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 7 }
+
+ bladecKVMCardVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 8 }
+
+ bladecKVMCardVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD Manufacture Date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 9 }
+
+ bladecKVMCardVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD Part number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 10 }
+
+ bladecKVMCardVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 11 }
+
+ bladecKVMCardVpdMachineModel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD machine model.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 12 }
+
+ bladecKVMCardVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD
+ manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 13 }
+
+ bladecKVMCardVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD
+ Product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 14 }
+
+ bladecKVMCardVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD
+ subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 15 }
+
+ bladecKVMCardVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD
+ Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladecKVMCardVpdEntry 16 }
+
+ bladecKVMCardVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade concurrent keyboard video mouse (cKVM) card VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { bladecKVMCardVpdEntry 17 }
+
+ -- ********************************************************************************
+ -- Table for the blade and expansion card WWN/GUIDs
+ -- ********************************************************************************
+ bladeAndExpCardWwnGuidVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeAndExpCardWwnGuidVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of World Wide Names (WWN), Global Unique IDs (GUID) and
+ Serial Attach SCSI IDs (SAS) of the blade server and its expansion
+ cards (daughter cards).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeHardwareVpd 7 }
+
+ bladeAndExpCardWwnGuidVpdEntry OBJECT-TYPE
+ SYNTAX BladeAndExpCardWwnGuidVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade WWN/GUID entries.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { bladeAndExpCardWwnGuidVpdIndex }
+ ::= { bladeAndExpCardWwnGuidVpdTable 1 }
+
+ BladeAndExpCardWwnGuidVpdEntry ::= SEQUENCE {
+ bladeAndExpCardWwnGuidVpdIndex INTEGER,
+ bladeAndExpCardWwnGuidVpdBayNumber OCTET STRING,
+ bladeAndExpCardWwnGuidVpdName OCTET STRING,
+ bladeAndExpCardWwnGuidVpdBladeBayNumber OCTET STRING,
+ bladeAndExpCardWwnGuidVpdType INTEGER,
+ bladeAndExpCardWwnGuidVpd1 OCTET STRING,
+ bladeAndExpCardWwnGuidVpd2 OCTET STRING,
+ bladeAndExpCardWwnGuidVpd3 OCTET STRING,
+ bladeAndExpCardWwnGuidVpd4 OCTET STRING,
+ bladeAndExpCardWwnGuidVpd5 OCTET STRING,
+ bladeAndExpCardWwnGuidVpd6 OCTET STRING,
+ bladeAndExpCardWwnGuidVpd7 OCTET STRING,
+ bladeAndExpCardWwnGuidVpd8 OCTET STRING
+ }
+
+ bladeAndExpCardWwnGuidVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 1 }
+
+ bladeAndExpCardWwnGuidVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card VPD bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 2 }
+
+ bladeAndExpCardWwnGuidVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade or expansion card.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 3 }
+
+ bladeAndExpCardWwnGuidVpdBladeBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "For expansion cards, it's the blade bay number of the blade
+ expansion card. For blades, it's the bay number of the blade.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 4 }
+
+ bladeAndExpCardWwnGuidVpdType OBJECT-TYPE
+ SYNTAX INTEGER {
+ notAvailable(0),
+ wwn(1),
+ guid(2),
+ sas(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID/SAS Type.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 5 }
+
+ bladeAndExpCardWwnGuidVpd1 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID 1.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 6 }
+
+ bladeAndExpCardWwnGuidVpd2 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID 2.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 7 }
+
+ bladeAndExpCardWwnGuidVpd3 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID 3.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 8 }
+
+ bladeAndExpCardWwnGuidVpd4 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID 4.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 9 }
+
+ bladeAndExpCardWwnGuidVpd5 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID 5.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 10 }
+
+ bladeAndExpCardWwnGuidVpd6 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID 6.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 11 }
+
+ bladeAndExpCardWwnGuidVpd7 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID 7.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 12 }
+
+ bladeAndExpCardWwnGuidVpd8 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade or expansion card WWN/GUID 8.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeAndExpCardWwnGuidVpdEntry 13 }
+
+
+ -- ********************************************************************************
+ -- Blade managerment card vpd
+ -- ********************************************************************************
+
+ bladeManagementCardVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeManagementCardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of VPD information for the blade
+ management card component.
+ For consistent results, view as a table
+ and not as individual entries."
+ ::= { bladeHardwareVpd 8 }
+
+ bladeManagementCardVpdEntry OBJECT-TYPE
+ SYNTAX BladeManagementCardVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD entry.
+ For consistent results, view as a table
+ and not as individual entries."
+ INDEX { bladeManagementCardVpdIndex }
+ ::= { bladeManagementCardVpdTable 1 }
+
+ BladeManagementCardVpdEntry ::= SEQUENCE {
+ bladeManagementCardVpdIndex INTEGER,
+ bladeManagementCardVpdBayNumber OCTET STRING,
+ bladeManagementCardVpdManufacturingId OCTET STRING,
+ bladeManagementCardVpdFruNumber OCTET STRING,
+ bladeManagementCardVpdHardwareRevision INTEGER,
+ bladeManagementCardVpdSerialNumber OCTET STRING,
+ bladeManagementCardVpdMachineType OCTET STRING,
+ bladeManagementCardVpdUuid OCTET STRING,
+ bladeManagementCardVpdManufDate OCTET STRING,
+ bladeManagementCardVpdPartNumber OCTET STRING,
+ bladeManagementCardVpdFruSerial OCTET STRING,
+ bladeManagementCardVpdMachineModel OCTET STRING,
+ bladeManagementCardVpdManufacturingIDNumber OCTET STRING,
+ bladeManagementCardVpdProductId OCTET STRING,
+ bladeManagementCardVpdSubManufacturerId OCTET STRING,
+ bladeManagementCardVpdClei OCTET STRING,
+ bladeManagementCardVpdHardwareRevisionString OCTET STRING
+ }
+
+ bladeManagementCardVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD index.
+ For consistent results, view as a table
+ and not as individual entries."
+ ::= { bladeManagementCardVpdEntry 1 }
+
+ bladeManagementCardVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD Bay number.
+ For consistent results, view as a table and
+ not as individual entries."
+ ::= { bladeManagementCardVpdEntry 2 }
+
+ bladeManagementCardVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD manufacturing ID.
+ For consistent results, view as a table and not as
+ individual entries."
+ ::= { bladeManagementCardVpdEntry 3 }
+ bladeManagementCardVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD FRU number.
+ For consistent results, view as a table and not
+ as individual entries."
+ ::= { bladeManagementCardVpdEntry 4 }
+
+
+ bladeManagementCardVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD hardware revision.
+ For consistent results, view as a table and not as
+ individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { bladeManagementCardVpdEntry 5 }
+
+ bladeManagementCardVpdSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD serial number.
+ For consistent results, view as a table and not
+ as individual entries."
+ ::= { bladeManagementCardVpdEntry 6 }
+
+ bladeManagementCardVpdMachineType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD machine type.
+ For consistent results, view as a table and not
+ as individual entries."
+ ::= { bladeManagementCardVpdEntry 7 }
+
+ bladeManagementCardVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD UUID.
+ For consistent results, view as a table
+ and not as individual entries."
+ ::= { bladeManagementCardVpdEntry 8 }
+ bladeManagementCardVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD Manufacture Date.
+ For consistent results, view as a table and not as
+ individual entries."
+ ::= { bladeManagementCardVpdEntry 9 }
+ bladeManagementCardVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD Part number.
+ For consistent results, view as a table and not
+ as individual entries."
+ ::= { bladeManagementCardVpdEntry 10 }
+
+ bladeManagementCardVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD FRU serial number.
+ For consistent results, view as a table and not as
+ individual entries."
+ ::= { bladeManagementCardVpdEntry 11 }
+
+ bladeManagementCardVpdMachineModel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD machine model.
+ For consistent results, view as a table and not
+ as individual entries."
+ ::= { bladeManagementCardVpdEntry 12 }
+
+ bladeManagementCardVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD manufacturer ID.
+ For consistent results, view as a table and not as
+ individual entries."
+ ::= { bladeManagementCardVpdEntry 13 }
+
+ bladeManagementCardVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD Product ID.
+ For consistent results, view as a table and not
+ as individual entries."
+ ::= { bladeManagementCardVpdEntry 14 }
+
+ bladeManagementCardVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as
+ individual entries."
+ ::= { bladeManagementCardVpdEntry 15 }
+
+ bladeManagementCardVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD Common Language Equipment
+ Identifier (CLEI).
+ For consistent results, view as a table and not as
+ individual entries."
+ ::= { bladeManagementCardVpdEntry 16 }
+
+ bladeManagementCardVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management card VPD hardware revision in string format.
+ For consistent results, view as a table and not as
+ individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { bladeManagementCardVpdEntry 17 }
+
+ -- ********************************************************************************
+ -- System Firmware Level VPD
+ -- ********************************************************************************
+ bladeFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 5 }
+
+
+ bladeBiosVPDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeBiosVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade firmware vital product data (VPD) information."
+ ::= { bladeFirmwareVpd 1 }
+
+ bladeBiosVPDEntry OBJECT-TYPE
+ SYNTAX BladeBiosVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade firmware VPD table entry"
+ INDEX { bladeBiosVpdIndex }
+ ::= { bladeBiosVPDTable 1 }
+
+
+ BladeBiosVPDEntry ::= SEQUENCE {
+ bladeBiosVpdIndex INTEGER,
+ bladeBiosVpdId INTEGER,
+ bladeBiosVpdExists INTEGER,
+ bladeBiosVpdPowerState INTEGER,
+ bladeBiosVpdName OCTET STRING,
+ bladeBiosVpdBuildId OCTET STRING,
+ bladeBiosVpdRevision OCTET STRING,
+ bladeBiosVpdDate OCTET STRING,
+ bladeBiosVpdLevelStatus OCTET STRING
+ }
+
+ bladeBiosVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade firmware VPD table index."
+ ::= { bladeBiosVPDEntry 1 }
+
+
+ bladeBiosVpdId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeBiosVPDEntry 2 }
+
+ bladeBiosVpdExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeBiosVPDEntry 3 }
+
+ bladeBiosVpdPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeBiosVPDEntry 4 }
+
+ bladeBiosVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeBiosVPDEntry 5 }
+
+ bladeBiosVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The build ID for the blade firmware."
+ ::= { bladeBiosVPDEntry 6 }
+
+ bladeBiosVpdRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The revision of the blade firmware."
+ ::= { bladeBiosVPDEntry 7 }
+
+ bladeBiosVpdDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The date of the blade firmware."
+ ::= { bladeBiosVPDEntry 8 }
+
+ bladeBiosVpdLevelStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The level status of the blade bios firmware build ID.
+ It has three possible values as Different (mismatch firmware build ID), Match (the
+ same firmware build ID), Unique (only one such firmware build ID)."
+ ::= { bladeBiosVPDEntry 9 }
+
+
+ bladeDiagsVPDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeDiagsVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade firmware vital product data (VPD) information."
+ ::= { bladeFirmwareVpd 2 }
+
+ bladeDiagsVPDEntry OBJECT-TYPE
+ SYNTAX BladeDiagsVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade firmware VPD table entry"
+ INDEX { bladeDiagsVpdIndex }
+ ::= { bladeDiagsVPDTable 1 }
+
+
+ BladeDiagsVPDEntry ::= SEQUENCE {
+ bladeDiagsVpdIndex INTEGER,
+ bladeDiagsVpdId INTEGER,
+ bladeDiagsVpdExists INTEGER,
+ bladeDiagsVpdPowerState INTEGER,
+ bladeDiagsVpdName OCTET STRING,
+ bladeDiagsVpdBuildId OCTET STRING,
+ bladeDiagsVpdRevision OCTET STRING,
+ bladeDiagsVpdDate OCTET STRING,
+ bladeDiagsVpdLevelStatus OCTET STRING
+ }
+
+ bladeDiagsVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade firmware VPD table index."
+ ::= { bladeDiagsVPDEntry 1 }
+
+
+ bladeDiagsVpdId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeDiagsVPDEntry 2 }
+
+ bladeDiagsVpdExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeDiagsVPDEntry 3 }
+
+ bladeDiagsVpdPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeDiagsVPDEntry 4 }
+
+ bladeDiagsVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeDiagsVPDEntry 5 }
+
+ bladeDiagsVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The build ID for the blade firmware."
+ ::= { bladeDiagsVPDEntry 6 }
+
+ bladeDiagsVpdRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The revision of the blade firmware."
+ ::= { bladeDiagsVPDEntry 7 }
+
+ bladeDiagsVpdDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The date of the blade firmware."
+ ::= { bladeDiagsVPDEntry 8 }
+
+ bladeDiagsVpdLevelStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The level status of the blade diagnostics firmware build ID.
+ It has three possible values as Different (mismatch firmware build ID), Match (the
+ same firmware build ID), Unique (only one such firmware build ID)."
+ ::= { bladeDiagsVPDEntry 9 }
+
+ bladeSysMgmtProcVPDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeSysMgmtProcVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade firmware vital product data (VPD) information."
+ ::= { bladeFirmwareVpd 3 }
+
+ bladeSysMgmtProcVPDEntry OBJECT-TYPE
+ SYNTAX BladeSysMgmtProcVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade firmware VPD table entry"
+ INDEX { bladeSysMgmtProcVpdIndex }
+ ::= { bladeSysMgmtProcVPDTable 1 }
+
+
+ BladeSysMgmtProcVPDEntry ::= SEQUENCE {
+ bladeSysMgmtProcVpdIndex INTEGER,
+ bladeSysMgmtProcVpdId INTEGER,
+ bladeSysMgmtProcVpdExists INTEGER,
+ bladeSysMgmtProcVpdPowerState INTEGER,
+ bladeSysMgmtProcVpdName OCTET STRING,
+ bladeSysMgmtProcVpdBuildId OCTET STRING,
+ bladeSysMgmtProcVpdRevision OCTET STRING,
+ bladeSysMgmtProcVpdLevelStatus OCTET STRING
+ }
+
+ bladeSysMgmtProcVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade firmware VPD table index."
+ ::= { bladeSysMgmtProcVPDEntry 1 }
+
+
+ bladeSysMgmtProcVpdId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeSysMgmtProcVPDEntry 2 }
+
+ bladeSysMgmtProcVpdExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeSysMgmtProcVPDEntry 3 }
+
+ bladeSysMgmtProcVpdPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeSysMgmtProcVPDEntry 4 }
+
+ bladeSysMgmtProcVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeSysMgmtProcVPDEntry 5 }
+
+ bladeSysMgmtProcVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The build ID for the blade firmware."
+ ::= { bladeSysMgmtProcVPDEntry 6 }
+
+ bladeSysMgmtProcVpdRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The revision of the blade firmware."
+ ::= { bladeSysMgmtProcVPDEntry 7 }
+
+ bladeSysMgmtProcVpdLevelStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The level status of the blade system management processor firmware build ID.
+ It has three possible values as Different (mismatch firmware build ID), Match (the
+ same firmware build ID), Unique (only one such firmware build ID)."
+ ::= { bladeSysMgmtProcVPDEntry 8 }
+
+ bladecKVMVPDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladecKVMVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade firmware vital product data (VPD) information."
+ ::= { bladeFirmwareVpd 4 }
+
+ bladecKVMVPDEntry OBJECT-TYPE
+ SYNTAX BladecKVMVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade firmware VPD table entry"
+ INDEX { bladecKVMVpdIndex }
+ ::= { bladecKVMVPDTable 1 }
+
+
+ BladecKVMVPDEntry ::= SEQUENCE {
+ bladecKVMVpdIndex INTEGER,
+ bladecKVMVpdId INTEGER,
+ bladecKVMVpdExists INTEGER,
+ bladecKVMVpdPowerState INTEGER,
+ bladecKVMVpdName OCTET STRING,
+ bladecKVMVpdRevision OCTET STRING
+ }
+
+ bladecKVMVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade firmware VPD table index."
+ ::= { bladecKVMVPDEntry 1 }
+
+
+ bladecKVMVpdId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladecKVMVPDEntry 2 }
+
+ bladecKVMVpdExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade specified exists or not."
+ ::= { bladecKVMVPDEntry 3 }
+
+ bladecKVMVpdPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladecKVMVPDEntry 4 }
+
+ bladecKVMVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladecKVMVPDEntry 5 }
+
+ bladecKVMVpdRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The revision of the blade firmware."
+ ::= { bladecKVMVPDEntry 7 }
+
+ -- ********************************************************************************
+ -- Blade Firmware Build ID
+ -- ********************************************************************************
+
+ bladeFWBuildIDs OBJECT IDENTIFIER ::= { bladeFirmwareVpd 5}
+
+
+ bladeFWBuildIDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeFWBuildIDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Blade Firmware Build ID entries information."
+ ::= { bladeFWBuildIDs 1 }
+
+ bladeFWBuildIDEntry OBJECT-TYPE
+ SYNTAX BladeFWBuildIDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Firmware Build ID table entry"
+ INDEX { bladeFWBuildIDIndex }
+ ::= { bladeFWBuildIDTable 1 }
+
+
+ BladeFWBuildIDEntry ::= SEQUENCE {
+ bladeFWBuildIDIndex INTEGER,
+ bladeFWBuildMfg OCTET STRING,
+ bladeFWBuildMT OCTET STRING,
+ bladeFWBuildFWType OCTET STRING,
+ bladeFWBuildID OCTET STRING,
+ bladeFWBuildRev OCTET STRING
+ }
+
+
+ bladeFWBuildIDIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index number of one Build ID entry.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeFWBuildIDEntry 1 }
+
+ bladeFWBuildMfg OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Manufacturer property of one Build ID entry.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeFWBuildIDEntry 2 }
+
+ bladeFWBuildMT OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Machine Type property of one Build ID entry.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeFWBuildIDEntry 3 }
+
+ bladeFWBuildFWType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Firmware Type property of one Build ID entry.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeFWBuildIDEntry 4 }
+
+ bladeFWBuildID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Build ID property of one Build ID entry.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeFWBuildIDEntry 5 }
+
+ bladeFWBuildRev OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Build Revision property of one Build ID entry.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bladeFWBuildIDEntry 6 }
+
+
+ createBladeFWBuildIDs OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Create one new Build ID List from current installed blades.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { bladeFWBuildIDs 2}
+
+ addBladeFWBuildID OBJECT IDENTIFIER ::= { bladeFWBuildIDs 3}
+
+ addBladeMfg OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Add one Build ID entry into the Build ID List.
+ This is to set Manufacturer property."
+ ::= { addBladeFWBuildID 1}
+
+ addBladeMt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Add one Build ID entry into the Build ID List.
+ This is to set Machine Type property."
+ ::= {addBladeFWBuildID 2}
+
+ addBladeFt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Add one Build ID entry into the Build ID List.
+ This is to set Firmware Type property."
+ ::= { addBladeFWBuildID 3}
+
+ addBladeBuildID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Add one Build ID entry into the Build ID List.
+ This is to set Build ID property."
+ ::= { addBladeFWBuildID 4}
+
+ addBladeBuildRev OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Add one Build ID entry into the Build ID List.
+ This is to set Build Revision property."
+ ::= { addBladeFWBuildID 5}
+
+ exeBladeAdding OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Add one Build ID entry into the Build ID List.
+ This is to perform the adding action.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { addBladeFWBuildID 6}
+
+ rmBladeFWBuildID OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Remove one Build ID entry from the Build ID List.
+ The index of the Build ID entry in the list is required.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { bladeFWBuildIDs 4}
+
+ rmAllBladeFWBuildIDs OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Remove all Build ID entries from the Build ID List.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { bladeFWBuildIDs 5}
+
+ buildIDFileName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..254))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "File name of the Build ID list that will be used in import function."
+ ::= { bladeFWBuildIDs 6 }
+
+ buildIDURIName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..254))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the fully qualified remote location of the build ID list. Use
+ buildIDFileName to specify the filename. A fully qualified remote location
+ contains a supported protocol followed by a colon and two slashes (//),
+ userid and password separated by a colon for login authentication, an
+ @ sign, followed by the hostname or IP address of the server where the
+ build ID list resides, followed by an optional port number to the hostname,
+ and the full pathname to the file. Note that if the port number is specified,
+ it must be separated with the hostname (or IP address) by a colon.
+
+ The AMM currently supports the following protocols:
+ TFTP, FTP, FTPS, HTTP and HTTPS.
+
+ The complete format of a fully qualified remote location is:
+
+ <protocol>://<userid:password>@<hostname:port>/<pathname>
+
+ An example of a fully qualified remote location can be:
+ ftp://USERID:PASSW0RD@192.168.0.2:30045/tmp
+ where the ftp protocol will be used for transferring the file in
+ this location, username is USERID, password is PASSW0RD, host IP address
+ is 192.168.0.2, port number is 30045, and the full pathname for the build ID
+ list is /tmp.
+
+ Some protocols do not need the username, password, and the port number, so the
+ minimum requirement for a fully qualified location can be:
+ <protocol>://<hostname>/<pathname>."
+ ::= { bladeFWBuildIDs 7 }
+
+ buildIDtftpIP OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If importing/exporting via the legacy method using a tftp server, then
+ set the IP address or host name of the TFTP server where
+ the firmware file resides. The address must be entered in a
+ dotted decimal IP string (e.g. 9.37.44.2)."
+ ::= { bladeFWBuildIDs 8 }
+
+ importBladeFWBuildIDs OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Import one Build ID List set by the buildIDFilename from a specific location
+ set by buildIDServer."
+ ::= { bladeFWBuildIDs 9}
+
+ exportBladeFWBuildIDs OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "Export the current Build ID List from the active AMM to a specific location
+ set by buildIDServer.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { bladeFWBuildIDs 10}
+
+ statusBladeFWBuildIDs OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Gives the status message from the last import or export operation."
+ ::= { bladeFWBuildIDs 11}
+
+ -- ********************************************************************************
+ -- Switch Module Hardware VPD
+ -- ********************************************************************************
+ smHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 6 }
+
+ smHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the switch module hardware components.
+ For consistent results, view as a table and not as
+ individual entries."
+ ::= { smHardwareVpd 1 }
+
+ smHardwareVpdEntry OBJECT-TYPE
+ SYNTAX SmHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD entry.
+ For consistent results, view as a table and
+ not as individual entries."
+ INDEX { smHardwareVpdIndex }
+ ::= { smHardwareVpdTable 1 }
+
+ SmHardwareVpdEntry ::= SEQUENCE {
+ smHardwareVpdIndex INTEGER,
+ smHardwareVpdBayNumber OCTET STRING,
+ smHardwareVpdManufacturingId OCTET STRING,
+ smHardwareVpdFruNumber OCTET STRING,
+ smHardwareVpdHardwareRevision INTEGER,
+ smHardwareVpdUuid OCTET STRING,
+ smHardwareVpdManufDate OCTET STRING,
+ smHardwareVpdPartNumber OCTET STRING,
+ smHardwareVpdFruSerial OCTET STRING,
+ smHardwareVpdManufacturingIDNumber OCTET STRING,
+ smHardwareVpdProductId OCTET STRING,
+ smHardwareVpdSubManufacturerId OCTET STRING,
+ smHardwareVpdClei OCTET STRING,
+ smHardwareVpdWwnGuid OCTET STRING,
+ smHardwareVpdWwnGuidType OCTET STRING,
+ smHardwareVpdWidth INTEGER,
+ smHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ smHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 1 }
+
+ smHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 2 }
+
+ smHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 3 }
+
+ smHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 4 }
+
+
+ smHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { smHardwareVpdEntry 5 }
+
+ smHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 8 }
+
+ smHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD manufacture date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 9 }
+
+ smHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 10 }
+
+ smHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD FRU Serial.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 11 }
+
+ smHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 12 }
+
+ smHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 13 }
+
+ smHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 14 }
+
+ smHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 15 }
+
+ smHardwareVpdWwnGuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD World Wide Name or Global Unique ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 16 }
+
+ smHardwareVpdWwnGuidType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The WWN/GUID/SAS entry is actually World Wide Name, Global Unique ID
+ or Serial Attach SCSI ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 17 }
+
+ smHardwareVpdWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the switch module hardware.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smHardwareVpdEntry 18 }
+
+ smHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { smHardwareVpdEntry 20 }
+
+ -- ********************************************************************************
+ -- Switch Interposer Hardware VPD
+ -- ********************************************************************************
+
+ smInpHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmInpHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the switch interposer hardware components.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smHardwareVpd 2 }
+
+ smInpHardwareVpdEntry OBJECT-TYPE
+ SYNTAX SmInpHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD entry.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ INDEX { smInpHardwareVpdIndex }
+ ::= { smInpHardwareVpdTable 1 }
+
+ SmInpHardwareVpdEntry ::= SEQUENCE {
+ smInpHardwareVpdIndex INTEGER,
+ smInpHardwareVpdBayNumber OCTET STRING,
+ smInpHardwareVpdManufacturingId OCTET STRING,
+ smInpHardwareVpdFruNumber OCTET STRING,
+ smInpHardwareVpdHardwareRevision INTEGER,
+ smInpHardwareVpdUuid OCTET STRING,
+ smInpHardwareVpdManufDate OCTET STRING,
+ smInpHardwareVpdPartNumber OCTET STRING,
+ smInpHardwareVpdFruSerial OCTET STRING,
+ smInpHardwareVpdManufacturingIDNumber OCTET STRING,
+ smInpHardwareVpdProductId OCTET STRING,
+ smInpHardwareVpdSubManufacturerId OCTET STRING,
+ smInpHardwareVpdClei OCTET STRING,
+ smInpHardwareVpdWwnGuid OCTET STRING,
+ smInpHardwareVpdWwnGuidType OCTET STRING,
+ smInpHardwareVpdWidth INTEGER,
+ smInpHardwareVpdName OCTET STRING,
+ smInpHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ smInpHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD index.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 1 }
+
+ smInpHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 2 }
+
+ smInpHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 3 }
+
+ smInpHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 4 }
+
+
+ smInpHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { smInpHardwareVpdEntry 5 }
+
+ smInpHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 8 }
+
+ smInpHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD manufacture Date.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 9 }
+
+ smInpHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 10 }
+
+ smInpHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer module hardware VPD FRU Serial.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 11 }
+
+ smInpHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer module hardware VPD manufacturer ID Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 12 }
+
+ smInpHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer module hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 13 }
+
+ smInpHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer module hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 14 }
+
+ smInpHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer module hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 15 }
+
+ smInpHardwareVpdWwnGuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer module hardware VPD World Wide Name or Global Unique ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 16 }
+
+ smInpHardwareVpdWwnGuidType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Switch Interposer WWN/GUID/SAS entry is actually World Wide
+ Name, Global Unique ID or Serial Attach SCSI ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 17 }
+
+ smInpHardwareVpdWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the switch Interposer module hardware.
+ For consistent results, view as a table and not as individual entries."
+ ::= { smInpHardwareVpdEntry 18 }
+
+ smInpHardwareVpdName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Switch Interposer Name.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only."
+ ::= { smInpHardwareVpdEntry 19 }
+
+ smInpHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Interposer hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HS only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { smInpHardwareVpdEntry 20 }
+
+ -- ********************************************************************************
+ -- Switch module Information
+ -- ********************************************************************************
+
+ smFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 7 }
+ -- Server blade switch module information
+
+ smMainAppVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmMainAppVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module main application VPD information table."
+ ::= {smFirmwareVpd 1}
+
+ smMainAppVpdEntry OBJECT-TYPE
+ SYNTAX SmMainAppVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module main application VPD table entry"
+ INDEX { smMainAppVpdIndex }
+ ::= { smMainAppVpdTable 1 }
+
+ SmMainAppVpdEntry ::= SEQUENCE {
+ smMainAppVpdIndex INTEGER,
+ smMainAppVpdId INTEGER,
+ smMainAppVpdExists INTEGER,
+ smMainAppVpdSwitchType INTEGER,
+ smMainApp1VpdBuildId OCTET STRING,
+ smMainApp1VpdBuildDate OCTET STRING,
+ smMainApp1VpdRevisionNumber OCTET STRING,
+ smMainApp2VpdBuildId OCTET STRING,
+ smMainApp2VpdBuildDate OCTET STRING,
+ smMainApp2VpdRevisionNumber OCTET STRING,
+ smMainApp3VpdBuildId OCTET STRING,
+ smMainApp3VpdBuildDate OCTET STRING,
+ smMainApp3VpdRevisionNumber OCTET STRING,
+ smMainAppVpdSwitchSubType INTEGER
+ }
+
+ smMainAppVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module main application VPD entry index."
+ ::= { smMainAppVpdEntry 1 }
+
+ smMainAppVpdId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module numeric identifier."
+ ::= { smMainAppVpdEntry 2 }
+
+ smMainAppVpdExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module specified exists or not."
+ ::= { smMainAppVpdEntry 3 }
+
+ smMainAppVpdSwitchType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ethernet(1),
+ fibre(2),
+ opm(3),
+ serialCM(4),
+ copperPassThrough(5),
+ infiniband(6),
+ highSpeed(20),
+ passThrough(30),
+ sas(40)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the type of switch module installed."
+ ::= { smMainAppVpdEntry 4 }
+
+ smMainApp1VpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware build id."
+ ::= { smMainAppVpdEntry 5 }
+
+ smMainApp1VpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware build date."
+ ::= { smMainAppVpdEntry 6 }
+
+ smMainApp1VpdRevisionNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware revision number."
+ ::= { smMainAppVpdEntry 7 }
+
+ smMainApp2VpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware build id."
+ ::= { smMainAppVpdEntry 8 }
+
+ smMainApp2VpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware build date."
+ ::= { smMainAppVpdEntry 9 }
+
+ smMainApp2VpdRevisionNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware revision number."
+ ::= { smMainAppVpdEntry 10 }
+ smMainApp3VpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "I/O Module firmware build id."
+ ::= { smMainAppVpdEntry 11 }
+
+ smMainApp3VpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "I/O Module firmware build date."
+ ::= { smMainAppVpdEntry 12 }
+
+ smMainApp3VpdRevisionNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "I/O Module firmware revision number."
+ ::= { smMainAppVpdEntry 13 }
+
+ smMainAppVpdSwitchSubType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ethernet(1),
+ fibre(2),
+ infiniband(6),
+ sas(7),
+ raidsas(8),
+ icpm(9)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the subtype of switch module installed."
+ ::= { smMainAppVpdEntry 20 }
+
+
+
+ smBootRomVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmBootRomVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module boot ROM VPD information table."
+ ::= {smFirmwareVpd 2}
+
+ smBootRomVpdEntry OBJECT-TYPE
+ SYNTAX SmBootRomVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module boot ROM VPD table entry"
+ INDEX { smBootRomVpdIndex }
+ ::= { smBootRomVpdTable 1 }
+
+ SmBootRomVpdEntry ::= SEQUENCE {
+ smBootRomVpdIndex INTEGER,
+ smBootRomVpdId INTEGER,
+ smBootRomVpdExists INTEGER,
+ smBootRomVpdSwitchType INTEGER,
+ smBootRomVpdBuildId OCTET STRING,
+ smBootRomVpdBuildDate OCTET STRING,
+ smBootRomVpdRevisionNumber OCTET STRING,
+ smBootRomVpdSwitchSubType INTEGER
+ }
+
+ smBootRomVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module boot ROM VPD entry index."
+ ::= { smBootRomVpdEntry 1 }
+
+ smBootRomVpdId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module numeric identifier."
+ ::= { smBootRomVpdEntry 2 }
+
+ smBootRomVpdExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module specified exists or not."
+ ::= { smBootRomVpdEntry 3 }
+
+ smBootRomVpdSwitchType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ethernet(1),
+ fibre(2),
+ opm(3),
+ serialCM(4),
+ copperPassThrough(5),
+ infiniband(6),
+ highSpeed(20),
+ passThrough(30),
+ sas(40)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the type of switch module installed."
+ ::= { smBootRomVpdEntry 4 }
+
+ smBootRomVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware build ID."
+ ::= { smBootRomVpdEntry 5 }
+
+ smBootRomVpdBuildDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware build date."
+ ::= { smBootRomVpdEntry 6 }
+
+ smBootRomVpdRevisionNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module firmware revision number."
+ ::= { smBootRomVpdEntry 7 }
+
+ smBootRomVpdSwitchSubType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ethernet(1),
+ fibre(2),
+ infiniband(6),
+ sas(7),
+ raidsas(8),
+ icpm(9)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the subtype of switch module installed."
+ ::= { smBootRomVpdEntry 8 }
+
+
+ -- ********************************************************************************
+ -- Power Module Hardware VPD
+ -- ********************************************************************************
+ pmHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 8 }
+
+ pmHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF PmHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the power module hardware components.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpd 1 }
+
+ pmHardwareVpdEntry OBJECT-TYPE
+ SYNTAX PmHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { pmHardwareVpdIndex }
+ ::= { pmHardwareVpdTable 1 }
+
+ PmHardwareVpdEntry ::= SEQUENCE {
+ pmHardwareVpdIndex INTEGER,
+ pmHardwareVpdBayNumber OCTET STRING,
+ pmHardwareVpdManufacturingId OCTET STRING,
+ pmHardwareVpdFruNumber OCTET STRING,
+ pmHardwareVpdHardwareRevision INTEGER,
+ pmHardwareVpdUuid OCTET STRING,
+ pmHardwareVpdManufDate OCTET STRING,
+ pmHardwareVpdPartNumber OCTET STRING,
+ pmHardwareVpdFruSerial OCTET STRING,
+ pmHardwareVpdManufacturingIDNumber OCTET STRING,
+ pmHardwareVpdProductId OCTET STRING,
+ pmHardwareVpdSubManufacturerId OCTET STRING,
+ pmHardwareVpdClei OCTET STRING,
+ pmHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ pmHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 1 }
+
+ pmHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 2 }
+
+ pmHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 3 }
+
+ pmHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 4 }
+
+
+ pmHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { pmHardwareVpdEntry 5 }
+
+ pmHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 8 }
+
+ pmHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD Manufacture Date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 9 }
+
+ pmHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 10 }
+
+ pmHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD FRU Serial.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 11 }
+
+ pmHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 12 }
+
+ pmHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 13 }
+
+ pmHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 14 }
+
+ pmHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { pmHardwareVpdEntry 15 }
+
+ pmHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Power module hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { pmHardwareVpdEntry 16 }
+
+ -- ********************************************************************************
+ -- Media Tray Hardware VPD
+ -- ********************************************************************************
+ mtHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 9 }
+
+ mtHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 3 }
+
+ mtHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 4 }
+
+
+ mtHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { mtHardwareVpd 5 }
+
+ mtHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 8 }
+
+ mtHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 9 }
+
+ mtHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 10 }
+
+ mtHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 11 }
+
+ mtHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 12 }
+
+ mtHardwareVpdCF1Capacity OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD CompactFlash card capacity.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 13 }
+
+ mtHardwareVpdCF2Capacity OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD CompactFlash card capacity.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mtHardwareVpd 14 }
+
+ mtHardwareVpdBBU1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the presence of Battery Backup Unit 1.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { mtHardwareVpd 15 }
+
+ mtHardwareVpdBBU2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the presence of Battery Backup Unit 2.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { mtHardwareVpd 16 }
+
+ mtHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { mtHardwareVpd 17 }
+
+ mtHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD Manufacture Date."
+ ::= { mtHardwareVpd 18 }
+
+ mtHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD Part Number."
+ ::= { mtHardwareVpd 19 }
+
+ mtHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 1 hardware VPD FRU Serial."
+ ::= { mtHardwareVpd 20 }
+ -- ********************************************************************************
+ -- Bottom Media Tray Hardware VPD
+ -- ********************************************************************************
+ mt2HardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 10 }
+
+ mt2HardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 3 }
+
+ mt2HardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 4 }
+
+
+ mt2HardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { mt2HardwareVpd 5 }
+
+ mt2HardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 8 }
+
+ mt2HardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 9 }
+
+ mt2HardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 10 }
+
+ mt2HardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 11 }
+
+ mt2HardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 12 }
+
+ mt2HardwareVpdCF1Capacity OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD CompactFlash card capacity.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 13 }
+
+ mt2HardwareVpdCF2Capacity OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD CompactFlash card capacity.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mt2HardwareVpd 14 }
+
+ mt2HardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { mt2HardwareVpd 17 }
+
+ mt2HardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD Manufacture Date."
+ ::= { mt2HardwareVpd 18 }
+
+ mt2HardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD Part Number."
+ ::= { mt2HardwareVpd 19 }
+
+ mt2HardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Media tray 2 hardware VPD FRU Serial."
+ ::= { mt2HardwareVpd 20 }
+ -- ********************************************************************************
+ -- Blower Firmware Level VPD
+ -- ********************************************************************************
+ blowerFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 12 }
+
+ blowerControllerVPDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BlowerControllerVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blower controller firmware vital product data (VPD) information.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowerFirmwareVpd 1 }
+
+ blowerControllerVPDEntry OBJECT-TYPE
+ SYNTAX BlowerControllerVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blower controller firmware VPD table entry"
+ INDEX { blowerControllerVpdIndex }
+ ::= { blowerControllerVPDTable 1 }
+
+
+ BlowerControllerVPDEntry ::= SEQUENCE {
+ blowerControllerVpdIndex INTEGER,
+ blowerControllerVpdId INTEGER,
+ blowerControllerVpdExists INTEGER,
+ blowerControllerVpdRevision OCTET STRING
+ }
+
+ blowerControllerVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower controller firmware VPD table index."
+ ::= { blowerControllerVPDEntry 1 }
+
+
+ blowerControllerVpdId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blower1(1),
+ blower2(2),
+ blower3(3),
+ blower4(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blower ID."
+ ::= { blowerControllerVPDEntry 2 }
+
+ blowerControllerVpdExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blower specified exists or not."
+ ::= { blowerControllerVPDEntry 3 }
+
+ blowerControllerVpdRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The revision of the blower controller firmware."
+ ::= { blowerControllerVPDEntry 7 }
+
+
+ -- ********************************************************************************
+ -- Blower Hardware VPD
+ -- ********************************************************************************
+ blowerHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 13 }
+
+ blowerHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BlowerHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the blower hardware components.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { blowerHardwareVpd 1 }
+
+ blowerHardwareVpdEntry OBJECT-TYPE
+ SYNTAX BlowerHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { blowerHardwareVpdIndex }
+ ::= { blowerHardwareVpdTable 1 }
+
+ BlowerHardwareVpdEntry ::= SEQUENCE {
+ blowerHardwareVpdIndex INTEGER,
+ blowerHardwareVpdBayNumber OCTET STRING,
+ blowerHardwareVpdManufacturingId OCTET STRING,
+ blowerHardwareVpdFruNumber OCTET STRING,
+ blowerHardwareVpdHardwareRevision INTEGER,
+ blowerHardwareVpdUuid OCTET STRING,
+ blowerHardwareVpdManufDate OCTET STRING,
+ blowerHardwareVpdPartNumber OCTET STRING,
+ blowerHardwareVpdFruSerial OCTET STRING,
+ blowerHardwareVpdManufacturingIDNumber OCTET STRING,
+ blowerHardwareVpdProductId OCTET STRING,
+ blowerHardwareVpdSubManufacturerId OCTET STRING,
+ blowerHardwareVpdClei OCTET STRING,
+ blowerHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ blowerHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD index.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 1 }
+
+ blowerHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 2 }
+
+ blowerHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 3 }
+
+ blowerHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 4 }
+
+
+ blowerHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { blowerHardwareVpdEntry 5 }
+
+ blowerHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 8 }
+
+ blowerHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD manufacture Date.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 9 }
+
+ blowerHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 10 }
+
+ blowerHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 11 }
+
+ blowerHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 12 }
+
+ blowerHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 13 }
+
+ blowerHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 14 }
+
+ blowerHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { blowerHardwareVpdEntry 15 }
+
+ blowerHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blower hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { blowerHardwareVpdEntry 16 }
+
+ -- ********************************************************************************
+ -- Fan Pack Firmware Level VPD
+ -- ********************************************************************************
+ fanPackFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 14 }
+
+ fanPackControllerVPDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF FanPackControllerVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of fan pack controller firmware vital product data (VPD) information.
+
+ NOTE: Fan packs are also referred to as Power Module Chassis Cooling Devices."
+ ::= { fanPackFirmwareVpd 1 }
+
+ fanPackControllerVPDEntry OBJECT-TYPE
+ SYNTAX FanPackControllerVPDEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Fan Pack controller firmware VPD table entry"
+ INDEX { fanPackControllerVpdIndex }
+ ::= { fanPackControllerVPDTable 1 }
+
+ FanPackControllerVPDEntry ::= SEQUENCE {
+ fanPackControllerVpdIndex INTEGER,
+ fanPackControllerVpdId INTEGER,
+ fanPackControllerVpdExists INTEGER,
+ fanPackControllerVpdRevision OCTET STRING
+ }
+
+ fanPackControllerVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Fan Pack controller firmware VPD table index."
+ ::= { fanPackControllerVPDEntry 1 }
+
+ fanPackControllerVpdId OBJECT-TYPE
+ SYNTAX INTEGER {
+ fanPack1(1),
+ fanPack2(2),
+ fanPack3(3),
+ fanPack4(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric fan pack ID."
+ ::= { fanPackControllerVPDEntry 2 }
+
+ fanPackControllerVpdExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the fan pack specified exists or not."
+ ::= { fanPackControllerVPDEntry 3 }
+
+ fanPackControllerVpdRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The revision of the fan pack controller firmware."
+ ::= { fanPackControllerVPDEntry 7 }
+
+
+
+ -- ********************************************************************************
+ -- Telco Alarm Panel Hardware VPD
+ -- ********************************************************************************
+ tapHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 15 }
+
+ tapHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapHardwareVpd 3 }
+
+ tapHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapHardwareVpd 4 }
+
+
+ tapHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { tapHardwareVpd 5 }
+
+ tapHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapHardwareVpd 8 }
+
+ tapHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD manufacture Date.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapHardwareVpd 9 }
+
+ tapHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapHardwareVpd 10 }
+
+ tapHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD FRU Serial.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { tapHardwareVpd 11 }
+
+ tapHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { tapHardwareVpd 12 }
+
+ tapHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { tapHardwareVpd 13 }
+
+ tapHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { tapHardwareVpd 14 }
+
+ tapHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { tapHardwareVpd 15 }
+
+ tapHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { tapHardwareVpd 16 }
+
+ -- ********************************************************************************
+ -- Network Clock Hardware VPD
+ -- ********************************************************************************
+ ncHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 16 }
+
+ ncHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NcHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Table of the Network Clock hardware components.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpd 1 }
+
+ ncHardwareVpdEntry OBJECT-TYPE
+ SYNTAX NcHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD entry.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ INDEX { ncHardwareVpdIndex }
+ ::= { ncHardwareVpdTable 1 }
+
+ NcHardwareVpdEntry ::= SEQUENCE {
+ ncHardwareVpdIndex INTEGER,
+ ncHardwareVpdBayNumber OCTET STRING,
+ ncHardwareVpdManufacturingId OCTET STRING,
+ ncHardwareVpdFruNumber OCTET STRING,
+ ncHardwareVpdHardwareRevision INTEGER,
+ ncHardwareVpdUuid OCTET STRING,
+ ncHardwareVpdManufDate OCTET STRING,
+ ncHardwareVpdPartNumber OCTET STRING,
+ ncHardwareVpdFruSerial OCTET STRING,
+ ncHardwareVpdManufacturingIDNumber OCTET STRING,
+ ncHardwareVpdProductId OCTET STRING,
+ ncHardwareVpdSubManufacturerId OCTET STRING,
+ ncHardwareVpdClei OCTET STRING,
+ ncHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ ncHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD index.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpdEntry 1 }
+
+ ncHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpdEntry 2 }
+
+ ncHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpdEntry 3 }
+
+ ncHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpdEntry 4 }
+
+
+ ncHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { ncHardwareVpdEntry 5 }
+
+ ncHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpdEntry 8 }
+
+ ncHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD manufacture Date.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpdEntry 9 }
+
+ ncHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpdEntry 10 }
+
+ ncHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD FRU serial number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncHardwareVpdEntry 11 }
+
+ ncHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { ncHardwareVpdEntry 12 }
+
+ ncHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { ncHardwareVpdEntry 13 }
+
+ ncHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { ncHardwareVpdEntry 14 }
+
+ ncHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD Common Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { ncHardwareVpdEntry 15 }
+
+ ncHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { ncHardwareVpdEntry 16 }
+
+ -- ********************************************************************************
+ -- Multiplexer Expansion Module Hardware VPD
+ -- ********************************************************************************
+ mxHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 17 }
+
+ mxHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MxHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the Multiplexer Expansion Module hardware components.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpd 1 }
+
+ mxHardwareVpdEntry OBJECT-TYPE
+ SYNTAX MxHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD entry.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ INDEX { mxHardwareVpdIndex }
+ ::= { mxHardwareVpdTable 1 }
+
+ MxHardwareVpdEntry ::= SEQUENCE {
+ mxHardwareVpdIndex INTEGER,
+ mxHardwareVpdBayNumber OCTET STRING,
+ mxHardwareVpdManufacturingId OCTET STRING,
+ mxHardwareVpdFruNumber OCTET STRING,
+ mxHardwareVpdHardwareRevision INTEGER,
+ mxHardwareVpdUuid OCTET STRING,
+ mxHardwareVpdManufDate OCTET STRING,
+ mxHardwareVpdPartNumber OCTET STRING,
+ mxHardwareVpdFruSerial OCTET STRING,
+ mxHardwareVpdManufacturingIDNumber OCTET STRING,
+ mxHardwareVpdProductId OCTET STRING,
+ mxHardwareVpdSubManufacturerId OCTET STRING,
+ mxHardwareVpdClei OCTET STRING,
+ mxHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ mxHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD index.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpdEntry 1 }
+
+ mxHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpdEntry 2 }
+
+ mxHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpdEntry 3 }
+
+ mxHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpdEntry 4 }
+
+
+ mxHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { mxHardwareVpdEntry 5 }
+
+ mxHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpdEntry 8 }
+
+ mxHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD manufacture Date.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpdEntry 9 }
+
+ mxHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpdEntry 10 }
+
+ mxHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD FRU Serial Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { mxHardwareVpdEntry 11 }
+
+ mxHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mxHardwareVpdEntry 12 }
+
+ mxHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mxHardwareVpdEntry 13 }
+
+ mxHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { mxHardwareVpdEntry 14 }
+
+ mxHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD Common
+ Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { mxHardwareVpdEntry 15 }
+
+ mxHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Multiplexer Expansion Module hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { mxHardwareVpdEntry 16 }
+
+ -- ********************************************************************************
+ -- Storage Module Hardware VPD
+ -- ********************************************************************************
+ stmHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 18 }
+
+ stmHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StmHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the Storage Module hardware components.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpd 1 }
+
+ stmHardwareVpdEntry OBJECT-TYPE
+ SYNTAX StmHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD entry.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ INDEX { stmHardwareVpdIndex }
+ ::= { stmHardwareVpdTable 1 }
+
+ StmHardwareVpdEntry ::= SEQUENCE {
+ stmHardwareVpdIndex INTEGER,
+ stmHardwareVpdBayNumber OCTET STRING,
+ stmHardwareVpdManufacturingId OCTET STRING,
+ stmHardwareVpdFruNumber OCTET STRING,
+ stmHardwareVpdHardwareRevision INTEGER,
+ stmHardwareVpdUuid OCTET STRING,
+ stmHardwareVpdManufDate OCTET STRING,
+ stmHardwareVpdPartNumber OCTET STRING,
+ stmHardwareVpdFruSerial OCTET STRING,
+ stmHardwareVpdManufacturingIDNumber OCTET STRING,
+ stmHardwareVpdProductId OCTET STRING,
+ stmHardwareVpdSubManufacturerId OCTET STRING,
+ stmHardwareVpdClei OCTET STRING,
+ stmHardwareVpdHardwareRevisionString OCTET STRING
+ }
+
+ stmHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD index.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpdEntry 1 }
+
+ stmHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpdEntry 2 }
+
+ stmHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpdEntry 3 }
+
+ stmHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpdEntry 4 }
+
+
+ stmHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then the HardwareRevisionString version of this MIB object should be used."
+ ::= { stmHardwareVpdEntry 5 }
+
+ stmHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpdEntry 8 }
+
+ stmHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD manufacture Date.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpdEntry 9 }
+
+ stmHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpdEntry 10 }
+
+ stmHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD FRU Serial Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmHardwareVpdEntry 11 }
+
+ stmHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { stmHardwareVpdEntry 12 }
+
+ stmHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { stmHardwareVpdEntry 13 }
+
+ stmHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { stmHardwareVpdEntry 14 }
+
+ stmHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD Common
+ Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { stmHardwareVpdEntry 15 }
+
+ stmHardwareVpdHardwareRevisionString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module hardware VPD hardware revision in string format.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only.
+
+ If a hardware revision is programmed in the OEM VPD area for this component,
+ then this MIB object should be used."
+ ::= { stmHardwareVpdEntry 16 }
+
+ -- ***********************************************************************
+ -- Storage Module Firmware VPD
+ -- ***********************************************************************
+ stmFirmwareVpd OBJECT IDENTIFIER ::= { vpdInformation 19 }
+
+ stmFirmwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StmFirmwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the Storage Module firmware components.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmFirmwareVpd 1 }
+
+ stmFirmwareVpdEntry OBJECT-TYPE
+ SYNTAX StmFirmwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module firmware VPD entry.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ INDEX { stmFirmwareVpdIndex }
+ ::= { stmFirmwareVpdTable 1 }
+
+ StmFirmwareVpdEntry ::= SEQUENCE {
+ stmFirmwareVpdIndex INTEGER,
+ stmFirmwareVpdType OCTET STRING,
+ stmFirmwareVpdBuildId OCTET STRING,
+ stmFirmwareVpdReleaseDate OCTET STRING,
+ stmFirmwareVpdRevision OCTET STRING
+ }
+
+ stmFirmwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module firmware VPD index.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmFirmwareVpdEntry 1 }
+
+ stmFirmwareVpdType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module firmware VPD type.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmFirmwareVpdEntry 2 }
+
+ stmFirmwareVpdBuildId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module firmware VPD build ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmFirmwareVpdEntry 3 }
+
+ stmFirmwareVpdReleaseDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module firmware VPD release date.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmFirmwareVpdEntry 4 }
+
+ stmFirmwareVpdRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module firmware VPD revision.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { stmFirmwareVpdEntry 5 }
+
+ -- ********************************************************************************
+ -- Battery Backup Unit Hardware VPD
+ -- ********************************************************************************
+ bbuHardwareVpd OBJECT IDENTIFIER ::= { vpdInformation 21 }
+
+ bbuHardwareVpdTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BbuHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the Battery Backup Unit hardware components.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpd 1 }
+
+ bbuHardwareVpdEntry OBJECT-TYPE
+ SYNTAX BbuHardwareVpdEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD entry.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ INDEX { bbuHardwareVpdIndex }
+ ::= { bbuHardwareVpdTable 1 }
+
+ BbuHardwareVpdEntry ::= SEQUENCE {
+ bbuHardwareVpdIndex INTEGER,
+ bbuHardwareVpdBayNumber OCTET STRING,
+ bbuHardwareVpdManufacturingId OCTET STRING,
+ bbuHardwareVpdFruNumber OCTET STRING,
+ bbuHardwareVpdHardwareRevision INTEGER,
+ bbuHardwareVpdUuid OCTET STRING,
+ bbuHardwareVpdManufDate OCTET STRING,
+ bbuHardwareVpdPartNumber OCTET STRING,
+ bbuHardwareVpdFruSerial OCTET STRING,
+ bbuHardwareVpdManufacturingIDNumber OCTET STRING,
+ bbuHardwareVpdProductId OCTET STRING,
+ bbuHardwareVpdSubManufacturerId OCTET STRING,
+ bbuHardwareVpdClei OCTET STRING
+ }
+
+ bbuHardwareVpdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD index.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 1 }
+
+ bbuHardwareVpdBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD Bay number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 2 }
+
+ bbuHardwareVpdManufacturingId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD manufacturing ID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 3 }
+
+ bbuHardwareVpdFruNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD FRU number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 4 }
+
+
+ bbuHardwareVpdHardwareRevision OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD hardware revision.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 5 }
+
+ bbuHardwareVpdUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD UUID.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 8 }
+
+ bbuHardwareVpdManufDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD manufacture Date.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 9 }
+
+ bbuHardwareVpdPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD Part Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 10 }
+
+ bbuHardwareVpdFruSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD FRU Serial Number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { bbuHardwareVpdEntry 11 }
+
+ bbuHardwareVpdManufacturingIDNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bbuHardwareVpdEntry 12 }
+
+ bbuHardwareVpdProductId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD product ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bbuHardwareVpdEntry 13 }
+
+ bbuHardwareVpdSubManufacturerId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD subsystem manufacturer ID.
+ For consistent results, view as a table and not as individual entries."
+ ::= { bbuHardwareVpdEntry 14 }
+
+ bbuHardwareVpdClei OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Battery Backup Unit hardware VPD Common
+ Language Equipment Identifier (CLEI).
+ For consistent results, view as a table and not as individual entries."
+ ::= { bbuHardwareVpdEntry 15 }
+
+ -- ********************************************************************************
+ -- Reload VPD
+ -- ********************************************************************************
+ reloadVpdData OBJECT IDENTIFIER ::= { vpdInformation 23 }
+
+ reloadAllVpdData OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reload all VPD data (firmware, hardware, MAC address, WWN/GUID and other Unique ID).
+ NOTE: The value returned for the GET command is meaningless."
+ ::= { reloadVpdData 1 }
+
+ reloadFwVpdData OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reload firmware VPD data.
+ NOTE: The value returned for the GET command is meaningless."
+ ::= { reloadVpdData 2 }
+
+ reloadHwVpdData OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reload hardware VPD data.
+ NOTE: The value returned for the GET command is meaningless."
+ ::= { reloadVpdData 3 }
+
+ reloadMACAddress OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reload blade MAC addresses.
+ NOTE: The value returned for the GET command is meaningless."
+ ::= { reloadVpdData 4 }
+
+ reloadWwnGuidVpdData OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reload blade and I/O module WWN/GUID and other VPD data.
+ NOTE: The value returned for the GET command is meaningless."
+ ::= { reloadVpdData 5 }
+
+
+ -- *************************************************************************
+ -- Passive Air Filter
+ -- *************************************************************************
+
+ airFilter OBJECT IDENTIFIER ::= { monitors 22 }
+
+ passiveAirFilter OBJECT IDENTIFIER ::= { airFilter 1 }
+
+ passiveAirFilterStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ reset(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable/Reset the passive air filter. When enabled, sending an enable or reset will reset the replace date.
+ The reset command is only applicable in BladeCenter Telco Refresh and it will restart the Fouled Filter Detection settings.
+ NOTE: This MIB object is only applicable for BladeCenter S, BladeCenter E Refresh, and BladeCenter Telco Refresh."
+ ::= { passiveAirFilter 1 }
+
+ passiveAirFilterMonthFreq OBJECT-TYPE
+ SYNTAX INTEGER {
+ oneMonth(1),
+ threeMonths(3),
+ sixMonths(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The chassis environment. 1 month indicates high dust, 3 months indicates moderate dust and, 6 months indicates low dust.
+ NOTE: This MIB object is for BladeCenter S and BladeCenter E Refresh only."
+ ::= { passiveAirFilter 2 }
+
+ passiveAirFilterReplaceDate OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..30))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The scheduled replacement date of the air filter.
+ NOTE: This MIB object is for BladeCenter S and BladeCenter E Refresh only."
+ ::= { passiveAirFilter 3 }
+
+
+ -- *************************************************************************
+ -- Component Information
+ --
+ -- This anchor is for a new set of tables that provide information about all
+ -- of the components in the chassis. For example, the componentInventoryTable
+ -- provides inventory information for all components in a single table and the
+ -- componentFirmwareTable provides firmware information for all components in
+ -- a single table. In previously defined tables, this information was
+ -- scattered about several tables, while this new concept provides a more
+ -- concise presentation.
+ --
+ -- *************************************************************************
+
+ componentInformation OBJECT IDENTIFIER ::= { monitors 23 }
+
+ -- *************************************************************************
+ -- Component Inventory Information
+ -- *************************************************************************
+ componentInventory OBJECT IDENTIFIER ::= { componentInformation 1 }
+
+ componentInventoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ComponentInventoryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of component inventory information. Not all components will
+ provide every object defined in the ComponentInventoryEntry."
+ ::= { componentInventory 1 }
+
+ componentInventoryEntry OBJECT-TYPE
+ SYNTAX ComponentInventoryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Component inventory information."
+ INDEX { componentInventoryTopologyPath }
+ ::= { componentInventoryTable 1 }
+
+ ComponentInventoryEntry ::= SEQUENCE {
+ componentInventoryTopologyPath OCTET STRING,
+ componentInventoryInstance INTEGER,
+ componentInventoryDescription OCTET STRING,
+ componentInventoryMachineTypeModel OCTET STRING,
+ componentInventoryMachineSerial OCTET STRING,
+ componentInventoryAssetID OCTET STRING,
+ componentInventoryPartNumber OCTET STRING,
+ componentInventoryFRUNumber OCTET STRING,
+ componentInventoryFRUSerialNumber OCTET STRING,
+ componentInventoryManufactureID OCTET STRING,
+ componentInventoryHardwareRevision OCTET STRING,
+ componentInventoryManufactureDate OCTET STRING,
+ componentInventoryUUID OCTET STRING,
+ componentInventoryProductID OCTET STRING,
+ componentInventorySubManufactureID OCTET STRING,
+ componentInventoryCLEI OCTET STRING,
+ componentInventoryAssetTag OCTET STRING,
+ componentInventorySpeed OCTET STRING,
+ componentInventoryIdentifier OCTET STRING,
+ componentInventorySize INTEGER,
+ componentInventoryMemoryType INTEGER,
+ componentInventoryProductName OCTET STRING,
+ componentInventoryProductVersion OCTET STRING,
+ componentInventoryProcessorType INTEGER,
+ componentInventoryProcessorFamily OCTET STRING,
+ componentInventoryProcessorCores OCTET STRING,
+ componentInventoryProcessorThreads OCTET STRING,
+ componentInventoryProcessorL1DCache OCTET STRING,
+ componentInventoryProcessorL1ICache OCTET STRING,
+ componentInventoryProcessorL2Cache OCTET STRING,
+ componentInventoryProcessorL3Cache OCTET STRING,
+ componentInventoryProcessorVoltage OCTET STRING,
+ componentInventoryProcessorExtClock OCTET STRING,
+ componentInventoryProcessorDataWidth OCTET STRING,
+ componentInventoryManufactureIDNum INTEGER
+ }
+
+ componentInventoryTopologyPath OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..100))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique identifier for a row in this table. The chassis and each
+ installed component is represented by a hardware topology tree, where
+ each node in the tree represents a component. The path to a particular
+ component consists of one or more <component>,<instance> pairs, where
+ each successive pair is a child of the previous parent pair.
+
+ As an example, the root of the tree is the chassis and is represented
+ by the pair 'CHASSIS, 1'. This pair indicates the first instance of
+ the chassis. If a blade is inserted in slot 4 of the chassis, its
+ topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
+ components in the chassis can be determined along with their relative
+ hierarchy to each other.
+
+ This component inventory table is indexed by this unique topology
+ path and the numeric designations for the components are:
+
+ CHASSIS, 0x01 Chassis
+ MM, 0x02 Management Module
+ BLADE, 0x03 Main system board of a blade
+ POWER, 0x04 Power Supply, Power Module, etc
+ COOLING, 0x05 Fan, blower, or other cooling device
+ IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
+ MEDIA, 0x07 Media device
+ PROCESSOR, 0x08 Any processor, processor module, etc
+ STORAGE, 0x09 Any type of storage device
+ EXPANSION, 0x0A Expansion Card (not covered by more specific type)
+ MEMORY, 0x0B Any memory device, module, etc
+ MFRU, 0x0C Managed FRU Device
+ PANEL, 0x0D Any sort of panel device, such as a front panel
+ BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
+ CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
+ CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
+ INTERPOSER, 0x11 Interposer device
+ CLOCK, 0x12 Clock card
+ MUX, 0x13 Mulitplexer card
+ ADDIN, 0x14 cKVM card & other addin cards
+ STORAGE_MODULE, 0x15 Container of one or more Storage Devices
+ SYS_EXPANSION_CARD, 0x16 Management card
+ BATTERY, 0x17 A single battery
+ BATTERY_MODULE, 0x18 Container of one or more batteries
+ MEDIA_MODULE, 0x19 Container of one or more media devices
+ MEMORY_BANK, 0x1A Memory banks
+ AIR_FILTER, 0x1B Filter mechanism (bezel)
+ SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
+ PARENT, 0x1D Reference to parent for multi-parent support
+ PHY_PORT, 0x1E Physical port
+ IO_EXPANDER, 0x1F RAID card"
+
+ ::= { componentInventoryEntry 1 }
+
+ componentInventoryInstance OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The slot number or instance of a particular component. Typically,
+ if the component plugs into the chassis, this represents the slot
+ number. However, some components are connected to another component,
+ and this represents the instance. For example, a blade may have
+ several expansion cards that connect to the blade system planar,
+ and in this case, this value identifies which expansion card
+ instance the row represents.
+
+ Note that this slot/instance value can be determined from the
+ componentInventoryTopologyPath object, but this
+ componentInventoryInstance object is provided as a convenience
+ to the user."
+ ::= { componentInventoryEntry 2 }
+
+ componentInventoryDescription OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A short text string describing the particular component. For the
+ AMM and blades, this name will be the configured name or its
+ serial number if no user configured name is available. For all
+ other components, this object will provide text to identify the
+ component. If a text string is not available, a value of
+ 'Not available' is presented.
+
+ For more detail, also refer to the componentInventoryProductName
+ object."
+ ::= { componentInventoryEntry 3 }
+
+ componentInventoryMachineTypeModel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The machine type and model number of this component. Typically,
+ the format is XXXXYYY, where XXXX reprsents the machine type
+ and YYY represents the model number."
+ ::= { componentInventoryEntry 4 }
+
+ componentInventoryMachineSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The machine serial number of this component."
+ ::= { componentInventoryEntry 5 }
+
+ componentInventoryAssetID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The asset identifier of this component, typically set by some
+ other authority than the
+ manufacturer."
+ ::= { componentInventoryEntry 6 }
+
+ componentInventoryPartNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The part number of this component."
+ ::= { componentInventoryEntry 7 }
+
+ componentInventoryFRUNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Field Replaceable Unit (FRU) number of this component."
+ ::= { componentInventoryEntry 8 }
+
+ componentInventoryFRUSerialNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Field Replaceable Unit (FRU) serial number of this component."
+ ::= { componentInventoryEntry 9 }
+
+ componentInventoryManufactureID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The text description of the manufacturer of this component."
+ ::= { componentInventoryEntry 10 }
+
+ componentInventoryHardwareRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The hardware revision number of the this component."
+ ::= { componentInventoryEntry 11 }
+
+ componentInventoryManufactureDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The date when the manufacturer created this component. The format
+ is XXYY, where XX is the week number of the year 20YY."
+ ::= { componentInventoryEntry 12 }
+
+ componentInventoryUUID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Universally Unique IDentifier (UUID) of this component, represented
+ as a 16 byte hex number."
+ ::= { componentInventoryEntry 13 }
+
+ componentInventoryProductID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The product identifier of the component assigned by the
+ manufacturer."
+ ::= { componentInventoryEntry 14 }
+
+ componentInventorySubManufactureID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The text sub-description of the manufacturer of this component, often
+ used to identify a supplier for a component which has multiple
+ suppliers."
+ ::= { componentInventoryEntry 15 }
+
+ componentInventoryCLEI OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Common Language Equipment Identifier (CLEI) of this component."
+ ::= { componentInventoryEntry 16 }
+
+ componentInventoryAssetTag OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The asset tag of this component."
+ ::= { componentInventoryEntry 17 }
+
+ componentInventorySpeed OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A speed designation for the component, for example, processor
+ speed."
+ ::= { componentInventoryEntry 18 }
+
+ componentInventoryIdentifier OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A unique identifier assigned by the manufacturer to the
+ component, for example,
+ a processor ID."
+ ::= { componentInventoryEntry 19 }
+
+ componentInventorySize OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A size designation for the component, for example, a memory
+ DIMM size
+ or hard drive capacity."
+ ::= { componentInventoryEntry 20 }
+
+ componentInventoryMemoryType OBJECT-TYPE
+ SYNTAX INTEGER {
+ fpmdram(1),
+ edo(2),
+ edodram(3),
+ sdram(4),
+ multiplexedram(5),
+ ddrsgram(6),
+ ddrsdram(7),
+ ddr2sdrm(8),
+ ddr3sdram(9)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The architecture specification of a memory device."
+ ::= { componentInventoryEntry 21 }
+
+ componentInventoryProductName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The product name assigned by the manufacturer for this component.
+
+ For more detail, also refer to the componentInventoryDescription
+ object."
+ ::= { componentInventoryEntry 22 }
+
+ componentInventoryProductVersion OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The product version assigned by the manufacturer for this
+ component."
+ ::= { componentInventoryEntry 23 }
+
+ componentInventoryProcessorType OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ unknown(2),
+ central(3),
+ math(4),
+ dsp(5),
+ video(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The type designation for processor components."
+ ::= { componentInventoryEntry 24 }
+
+ componentInventoryProcessorFamily OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The family designation for processor components."
+ ::= { componentInventoryEntry 25 }
+
+ componentInventoryProcessorCores OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of cores present on a processor component."
+ ::= { componentInventoryEntry 26 }
+
+ componentInventoryProcessorThreads OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of threads present on a processor component."
+ ::= { componentInventoryEntry 27 }
+
+ componentInventoryProcessorL1DCache OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The level 1 data cache size of a processor component."
+ ::= { componentInventoryEntry 28 }
+
+ componentInventoryProcessorL1ICache OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The level 1 instruction cache size of a processor component."
+ ::= { componentInventoryEntry 29 }
+
+ componentInventoryProcessorL2Cache OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The level 2 cache size of a processor component."
+ ::= { componentInventoryEntry 30 }
+
+ componentInventoryProcessorL3Cache OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The level 3 cache size of a processor component."
+ ::= { componentInventoryEntry 31 }
+
+ componentInventoryProcessorVoltage OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The voltage rating for a processor component."
+ ::= { componentInventoryEntry 32 }
+
+ componentInventoryProcessorExtClock OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The external clock speed of a processor component."
+ ::= { componentInventoryEntry 33 }
+
+ componentInventoryProcessorDataWidth OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The maximum data bus width capability of a processor component,
+ expressed typically in bits."
+ ::= { componentInventoryEntry 34 }
+
+ componentInventoryManufactureIDNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The identification number assigned for the component by the manufacturer."
+ ::= { componentInventoryEntry 35 }
+
+
+ -- *************************************************************************
+ -- Component Firmware Information
+ -- *************************************************************************
+ componentFirmware OBJECT IDENTIFIER ::= { componentInformation 2 }
+
+ componentFirmwareTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ComponentFirmwareEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of component firmware information. Not all components will
+ provide every object defined in the ComponentFirmwareEntry."
+ ::= { componentFirmware 1 }
+
+ componentFirmwareEntry OBJECT-TYPE
+ SYNTAX ComponentFirmwareEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Component firmware information."
+ INDEX { componentFirmwareTopologyPath, componentFirmwareIndex }
+ ::= { componentFirmwareTable 1 }
+
+ ComponentFirmwareEntry ::= SEQUENCE {
+ componentFirmwareTopologyPath OCTET STRING,
+ componentFirmwareIndex INTEGER,
+ componentFirmwareComponentInstance INTEGER,
+ componentFirmwareComponentDescription OCTET STRING,
+ componentFirmwareType OCTET STRING,
+ componentFirmwareBuildID OCTET STRING,
+ componentFirmwareReleaseDate OCTET STRING,
+ componentFirmwareFilename OCTET STRING,
+ componentFirmwareRevision OCTET STRING,
+ componentFirmwareRevisionMajor INTEGER,
+ componentFirmwareRevisionMinor INTEGER,
+ componentFirmwareLevelStatus OCTET STRING,
+ componentFirmwarePendingBuildID OCTET STRING,
+ componentFirmwarePendingReleaseDate OCTET STRING,
+ componentFirmwarePendingRevision OCTET STRING,
+ componentFirmwareTypeID INTEGER
+ }
+
+ componentFirmwareTopologyPath OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..100))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique identifier for a component in this table. The chassis and each
+ installed component is represented by a hardware topology tree, where
+ each node in the tree represents a component. The path to a particular
+ component consists of one or more <component>,<instance> pairs, where
+ each successive pair is a child of the previous parent pair.
+
+ As an example, the root of the tree is the chassis and is represented
+ by the pair 'CHASSIS, 1'. This pair indicates the first instance of
+ the chassis. If a blade is inserted in slot 4 of the chassis, its
+ topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
+ components in the chassis can be determined along with their relative
+ hierarchy to each other.
+
+ Note that this TP is preceded by a single octet that specifies the TP length.
+ This is required since this table is indexed with two indices and, therefore,
+ the TP length must be explicitly provided.
+
+ This component firmware table is indexed by this unique topology
+ path and the numeric designations for the components are:
+
+ CHASSIS, 0x01 Chassis
+ MM, 0x02 Management Module
+ BLADE, 0x03 Main system board of a blade
+ POWER, 0x04 Power Supply, Power Module, etc
+ COOLING, 0x05 Fan, blower, or other cooling device
+ IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
+ MEDIA, 0x07 Media device
+ PROCESSOR, 0x08 Any processor, processor module, etc
+ STORAGE, 0x09 Any type of storage device
+ EXPANSION, 0x0A Expansion Card (not covered by more specific type)
+ MEMORY, 0x0B Any memory device, module, etc
+ MFRU, 0x0C Managed FRU Device
+ PANEL, 0x0D Any sort of panel device, such as a front panel
+ BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
+ CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
+ CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
+ INTERPOSER, 0x11 Interposer device
+ CLOCK, 0x12 Clock card
+ MUX, 0x13 Mulitplexer card
+ ADDIN, 0x14 cKVM card & other addin cards
+ STORAGE_MODULE, 0x15 Container of one or more Storage Devices
+ SYS_EXPANSION_CARD, 0x16 Management card
+ BATTERY, 0x17 A single battery
+ BATTERY_MODULE, 0x18 Container of one or more batteries
+ MEDIA_MODULE, 0x19 Container of one or more media devices
+ MEMORY_BANK, 0x1A Memory banks
+ AIR_FILTER, 0x1B Filter mechanism (bezel)
+ SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
+ PARENT, 0x1D Reference to parent for multi-parent support
+ PHY_PORT, 0x1E Physical port
+ IO_EXPANDER, 0x1F RAID card"
+
+ ::= { componentFirmwareEntry 1 }
+
+ componentFirmwareIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Each component may have one or more types of firmware associated with it, and this index object
+ identifies the particular instance."
+ ::= { componentFirmwareEntry 2 }
+
+ componentFirmwareComponentInstance OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The slot number or instance of a particular component. Typically,
+ if the component plugs into the chassis, this represents the slot
+ number. However, some components are connected to another component,
+ and this represents the instance. For example, a blade may have
+ several expansion cards that connect to the blade system planar,
+ and in this case, this value identifies which expansion card
+ instance the row represents.
+
+ Note that this slot/instance value can be determined from the
+ componentFirmwareTopologyPath object, but this
+ componentFirmwareComponentInstance object is provided as a convenience
+ to the user."
+ ::= { componentFirmwareEntry 3 }
+
+ componentFirmwareComponentDescription OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A short text string describing the particular component. For the
+ AMM and blades, this name will be the configured name or its
+ serial number if no user configured name is available. For all
+ other components, this object will provide text to identify the
+ component. If a text string is not available, a value of
+ 'Not available' is presented.
+
+ For more detail, also refer to the componentInventoryProductName
+ object."
+ ::= { componentFirmwareEntry 4 }
+
+ componentFirmwareType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A text description of the type of firmware load."
+ ::= { componentFirmwareEntry 5 }
+
+ componentFirmwareBuildID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A text description of the build identifier for this firmware load."
+ ::= { componentFirmwareEntry 6 }
+
+ componentFirmwareReleaseDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A text description of the release date for this firmware load."
+ ::= { componentFirmwareEntry 7 }
+
+ componentFirmwareFilename OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A text description of the filename of this firmware load."
+ ::= { componentFirmwareEntry 8 }
+
+ componentFirmwareRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A text description of the revision level of this firmware load."
+ ::= { componentFirmwareEntry 9 }
+
+ componentFirmwareRevisionMajor OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A numeric identifier of the revision major number for this firmware load."
+ ::= { componentFirmwareEntry 10 }
+
+ componentFirmwareRevisionMinor OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A numeric identifier of the revision minor number for this firmware load."
+ ::= { componentFirmwareEntry 11 }
+
+ componentFirmwareLevelStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The level status of the firmware build ID.
+ It has three possible values as Different (mismatch firmware build ID), Match (the
+ same firmware build ID), Unique (only one such firmware build ID)."
+ ::= { componentFirmwareEntry 12 }
+
+ componentFirmwarePendingBuildID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A text description of the build identifier for this pending firmware load."
+ ::= { componentFirmwareEntry 13 }
+
+ componentFirmwarePendingReleaseDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A text description of the release date for this pending firmware load."
+ ::= { componentFirmwareEntry 14 }
+
+ componentFirmwarePendingRevision OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A text description of the revision level of this pending firmware load."
+ ::= { componentFirmwareEntry 15 }
+
+ componentFirmwareTypeID OBJECT-TYPE
+ SYNTAX INTEGER {
+ bladeFwBios(1),
+ bladeDiagnostics(2),
+ bladeSysMgmtProcessor(3),
+ bladeFpga(4),
+ bladecKVM(5),
+ switchModuleMainAppl1(41),
+ switchModuleMainAppl2(42),
+ switchModuleBootROM(43),
+ mgmtModuleMainAppl(61),
+ mgmtModuleMainApplPendingRestart(62),
+ fanController(81),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the type of firmware load with a numeric identifier."
+ ::= { componentFirmwareEntry 20 }
+
+
+ componentInventoryReady OBJECT-TYPE
+ SYNTAX INTEGER {
+ notReady(0),
+ ready(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "When a blade management controller or the AMM is reset, the
+ blade inventory data is refreshed in the AMM database. This includes
+ items like IBM VPD (e.g. - serial number, UUID) and MAC address information.
+
+ Applications need to know when this information has been populated on the AMM
+ before they begin to query it using SNMP or other means. This simple flag
+ object will return a ready or notReady indication when all blades have completed
+ initialization and the inventory information has been provided to the AMM.
+
+ Note that due to blades that may be experiencing a 'communication failure' or
+ 'initialization failure' condition, this object may continue to show notReady.
+ Therefore, any application that polls this object should also incorporate a timeout
+ period. As of AMM release v5.3, a 10 minute timeout seems to be a minimum suggested
+ polling period.
+
+ A more granular, per-blade status is available via the bladeSystemStatusTable"
+ ::= { componentInformation 3 }
+
+
+ componentDriveTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ComponentDriveEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of information indicating presence of a disk drive on a component.
+ The management module does not receive any inventory VPD from the
+ component, so only the presence of a drive can be indicated by this table."
+ ::= { componentInformation 10 }
+
+ componentDriveEntry OBJECT-TYPE
+ SYNTAX ComponentDriveEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Component drive information."
+ INDEX { componentDriveTopologyPath }
+ ::= { componentDriveTable 1 }
+
+ ComponentDriveEntry ::= SEQUENCE {
+ componentDriveTopologyPath OCTET STRING,
+ componentDriveDescription OCTET STRING
+ }
+
+ componentDriveTopologyPath OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..100))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique identifier for a row in this table. The chassis and each
+ installed component is represented by a hardware topology tree, where
+ each node in the tree represents a component. The path to a particular
+ component consists of one or more <component>,<instance> pairs, where
+ each successive pair is a child of the previous parent pair.
+
+ As an example, the root of the tree is the chassis and is represented
+ by the pair 'CHASSIS, 1'. This pair indicates the first instance of
+ the chassis. If a blade is inserted in slot 4 of the chassis, its
+ topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
+ components in the chassis can be determined along with their relative
+ hierarchy to each other.
+
+ This component table is indexed by this unique topology
+ path and the numeric designations for the components are:
+
+ CHASSIS, 0x01 Chassis
+ MM, 0x02 Management Module
+ BLADE, 0x03 Main system board of a blade
+ POWER, 0x04 Power Supply, Power Module, etc
+ COOLING, 0x05 Fan, blower, or other cooling device
+ IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
+ MEDIA, 0x07 Media device
+ PROCESSOR, 0x08 Any processor, processor module, etc
+ STORAGE, 0x09 Any type of storage device
+ EXPANSION, 0x0A Expansion Card (not covered by more specific type)
+ MEMORY, 0x0B Any memory device, module, etc
+ MFRU, 0x0C Managed FRU Device
+ PANEL, 0x0D Any sort of panel device, such as a front panel
+ BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
+ CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
+ CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
+ INTERPOSER, 0x11 Interposer device
+ CLOCK, 0x12 Clock card
+ MUX, 0x13 Mulitplexer card
+ ADDIN, 0x14 cKVM card & other addin cards
+ STORAGE_MODULE, 0x15 Container of one or more Storage Devices
+ SYS_EXPANSION_CARD, 0x16 Management card
+ BATTERY, 0x17 A single battery
+ BATTERY_MODULE, 0x18 Container of one or more batteries
+ MEDIA_MODULE, 0x19 Container of one or more media devices
+ MEMORY_BANK, 0x1A Memory banks
+ AIR_FILTER, 0x1B Filter mechanism (bezel)
+ SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
+ PARENT, 0x1D Reference to parent for multi-parent support
+ PHY_PORT, 0x1E Physical port
+ IO_EXPANDER, 0x1F RAID card"
+ ::= { componentDriveEntry 1 }
+
+ componentDriveDescription OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A short text string describing the particular drive on the component."
+ ::= { componentDriveEntry 2 }
+
+
+ -- ********************************************************************************
+ -- MM Security Settings
+ -- ********************************************************************************
+ securitySettings OBJECT IDENTIFIER ::= { configureSP 3 }
+
+ dataEncryption OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If enabled, all confidential data will be encrypted. The default value is disabled.
+ NOTE: Once the data is encrypted, the only way to reverse this process is to
+ reset to default values."
+ ::= { securitySettings 1 }
+
+ trespassWarning OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If enabled, a customizable trespass warning message is displayed via the Web
+ and CLI interfaces."
+ ::= { securitySettings 2 }
+
+ trespassWarningDefault OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset the trespass warning to default value.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { securitySettings 3 }
+
+ trespassMessage OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..1600))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The value of the trespass warning message."
+ ::= { securitySettings 4 }
+
+ -- ********************************************************************************
+ -- MM Clock
+ -- ********************************************************************************
+ spClock OBJECT IDENTIFIER ::= { configureSP 4 }
+
+ spClockDateAndTimeSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MM clock date and time setting.
+ A date-time specification for the local time of day.
+ For example to set the date and time to
+ March 4, 2001 at 06:00:00AM, set the value to:'03/04/2001,06:00:00'.
+ field contents range
+ _____ ________ _____
+ 1 month 01..12
+ 2 separator '/'
+ 3 day 01..31
+ 4 separator '/'
+ 5 year 2000..2089
+ 6 separator ','
+ 7 hour 00..23
+ 8 separator ':'
+ 9 minutes 00..59
+ 10 separator ':'
+ 11 seconds 00..59
+ "
+ ::= { spClock 1 }
+
+ spClockTimezoneSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MM clock Greenwich Mean Time(GMT) offset and Daylight Saving Time(DST)
+ settings.
+
+ The following table lists GMT offsets and associated DST
+ information. DST is not observed in time zones where
+ the 'Observe DST' value does not contain 'yes' in the table.
+ Also, note that in some cases additional information
+ is required to determine the clock adjustment when DST is
+ observed. The additional information is required when the
+ GMT offset being written is +2:00 or +10:00.
+
+ Examples
+ -to set the GMT offset to +3:30,
+ set the value to:'+3:30,no'
+
+ -for Eastern Standard Time and observing DST,
+ set the value to:'-5:00,yes'
+
+ -for Egypt and observing DST,
+ set the value to:'+2:00,yes,6'
+
+
+ GMT Observe Additional
+ Offset DST? DST value
+ ______ _______ __________
+ +0:00 yes|no
+ +1:00 yes|no
+ +2:00 yes|no When 'Observe DST?' value is 'yes':
+ 5 (for E.Europe)
+ 4 (for GTB)
+ 6 (for Egypt)
+ 7 (for FLE)
+ +3:00 yes|no
+ +3:30 yes|no
+ +4:00 no
+ +4:30 no
+ +5:00 yes|no
+ +5:30 no
+ +6:00 no
+ +7:00 no
+ +8:00 yes|no
+ +9:00 yes|no
+ +9:30 yes|no When 'Observe DST?' value is 'yes':
+ 10 (for South AUS)
+ 9 (for other locations)
+ +10:00 yes|no When 'Observe DST?' value is 'yes':
+ 9 (for AUS Eastern)
+ 10 (for TAS,ACT,NSW,VIC)
+ 4 (for Vladivostok)
+ +11:00 no
+ +12:00 yes|no
+ -12:00 no
+ -11:00 no
+ -10:00 no
+ -9:00 yes|no When 'Observe DST?' value is 'yes':
+ 12 (for USA and Canada)
+ 1 (for other locations)
+ -8:00 yes|no When 'Observe DST?' value is 'yes':
+ 12 (for USA and Canada)
+ 1 (for other locations)
+ -7:00 yes|no When 'Observe DST?' value is 'yes':
+ 12 (for USA and Canada)
+ 1 (for other locations)
+ -6:00 yes|no When 'Observe DST?' value is 'yes':
+ 12 (for USA and Canada)
+ 1 (for other locations)
+ -5:00 yes|no When 'Observe DST?' value is 'yes':
+ 12 (for USA and Canada)
+ 1 (for other locations)
+ -4:00 yes|no When 'Observe DST' value is 'yes':
+ 12 (for Canada)
+ 1 (for other locations)
+ -3:30 yes|no
+ -3:00 yes|no
+ -2:00 yes|no
+ -1:00 yes|no
+ "
+ ::= { spClock 2 }
+
+
+ -- ********************************************************************************
+ -- MM identification
+ -- ********************************************************************************
+ spIdentification OBJECT IDENTIFIER ::= { configureSP 5 }
+
+ spTxtId OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "MM text ID.
+ NOTE: Do not put any 'space characters' at end of the ID."
+ ::= { spIdentification 1 }
+
+ -- ********************************************************************************
+ -- Network Configuration
+ -- ********************************************************************************
+ networkConfiguration OBJECT IDENTIFIER ::= { configureSP 9 }
+
+ -- ********************************************************************************
+ -- Network Interfaces
+ -- ********************************************************************************
+ networkInterfaces OBJECT IDENTIFIER ::= { networkConfiguration 1 }
+ -- ********************************************************************************
+ -- Ethernet Interface 1
+ -- ********************************************************************************
+ extEthernetInterface OBJECT IDENTIFIER ::= { networkInterfaces 1 }
+
+ extEthernetInterfaceType OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The type of interface. Indicates 'Ethernet-1'."
+ ::= { extEthernetInterface 1 }
+
+ extEthernetInterfaceHostName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the 64 byte null terminated DNS host name for this
+ interface."
+ ::= { extEthernetInterface 3 }
+
+ extEthernetInterfaceIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the IP address for the ethernet interface."
+ ::= { extEthernetInterface 4 }
+
+ extEthernetInterfaceDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ enet10Megabit(3),
+ enet100Megabit(4),
+ autoSpeed(5),
+ enet1GigabitAuto(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the data transfer rate to be used over the ethernet
+ interface: 10Mb, 100Mb, 1G Auto or Auto.
+
+ Note that not all AMM hardware supports the 1G Auto speed. If it does not
+ and a SET of this value is attempted, it will be rejected with a
+ badValue return code.
+
+ When a user selects the 1G Auto setting, the duplex setting will be forced to
+ fullDuplex."
+ ::= { extEthernetInterface 5 }
+
+ extEthernetInterfaceDuplexSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ fullDuplex(1),
+ halfDuplex(2),
+ autoDuplex(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the duplex settings for the data transfer rate to be used over
+ the ethernet interface: Half, Full, or Auto.
+
+ When a user selects the 1G Auto speed setting, the duplex setting will be forced to
+ fullDuplex."
+ ::= { extEthernetInterface 6 }
+
+ extEthernetInterfaceLAA OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(17))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the locally administered MAC address. The locally administered
+ address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This
+ value must be in the form XX:XX:XX:XX:XX:XX where 'X' is a number between 0 - 9 and
+ A - F. This MM subsystem does not allow use of a multicast address. A multicast
+ address has the least significant bit of the first byte set to a 1. The first
+ byte must, therefore, be an even number.
+
+ NOTE: Although the locally administered MAC address can be assigned the same value
+ for the primary and backup AMM, it is not recommended."
+ ::= { extEthernetInterface 7 }
+
+ extEthernetInterfaceDhcpEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ dhcpDisabled(0),
+ dhcpEnabled(1),
+ tryDhcpThenTryStatic(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable DHCP on this interface."
+ ::= { extEthernetInterface 8 }
+
+ extEthernetInterfaceGatewayIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the IP address of the gateway/router for the ethernet
+ interface."
+ ::= { extEthernetInterface 9 }
+
+ extEthernetInterfaceBIA OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(17))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the burned-in MAC (BIA) address."
+ ::= { extEthernetInterface 10 }
+
+ extEthernetInterfaceMTU OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the Maximum Transmission Unit(MTU) for the ethernet
+ interface"
+ ::= { extEthernetInterface 13 }
+
+ extEthernetInterfaceSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the subnet mask for the ethernet interface"
+ ::= { extEthernetInterface 14 }
+
+ -- ********************************************************************************
+ -- DHCP Server Assigned Settings for ethernet interface 1
+ -- ********************************************************************************
+
+ dhcpEthernetInterface OBJECT IDENTIFIER ::= { extEthernetInterface 16 }
+
+ dhcpHostName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the 64 byte null terminated DNS host name for this
+ interface, assigned by the DHCP server."
+ ::= { dhcpEthernetInterface 1 }
+
+ dhcpIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the IP address for the ethernet interface,
+ assigned by the DHCP server."
+ ::= { dhcpEthernetInterface 2 }
+
+ dhcpGatewayIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the IP address of the gateway/router for the ethernet
+ interface, assigned by the DHCP server."
+ ::= { dhcpEthernetInterface 3 }
+
+ dhcpSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the Subnet Mask for the ethernet
+ interface, assigned by the DHCP server."
+ ::= { dhcpEthernetInterface 4 }
+
+ dhcpDomainName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the 64 byte null terminated Domain Name for this
+ interface, assigned by the DHCP server."
+ ::= { dhcpEthernetInterface 5 }
+
+ dhcpDHCPServer OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the DHCP server IP address used to acquire the
+ DHCP settings."
+ ::= { dhcpEthernetInterface 6 }
+
+ dhcpPrimaryDNSServer OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the Primary DNS server, assigned by the DHCP server."
+ ::= { dhcpEthernetInterface 7 }
+
+ dhcpSecondaryDNSServer OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the Secondary DNS server, assigned by the DHCP server."
+ ::= { dhcpEthernetInterface 8 }
+
+ dhcpTertiaryDNSServer OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the tertiary DNS server, assigned by the DHCP server."
+ ::= { dhcpEthernetInterface 9 }
+
+ -- ********************************************************************************
+ -- PPP Interface 1
+ -- ********************************************************************************
+ intEthernetInterface OBJECT IDENTIFIER ::= { networkInterfaces 2 }
+
+ intEthernetInterfaceType OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The type of interface. Indicates 'PPP-1'.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 1 }
+
+ intEthernetInterfaceEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ interfaceDisabled(0),
+ interfaceEnabled(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Disable or enable the internal ethernet interface.
+ NOTE: To alter any of the configuration settings for the
+ ethernet interface, the following procedure should be used:
+ (1) This object should be set to 'interfaceDisabled'
+ (2) Make the modifications to other settings
+ (3) This object should be set to 'interfaceEnabled'
+ (4) Restart the management module
+
+ Also note that when attempting to enable this interface, the
+ remote IP address is verified to be nonzero. If this verification
+ fails, an error response will be returned and the internal ethernet
+ interface will be left disabled.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 2 }
+
+ intEthernetInterfaceLocalIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Contains the IP address for the MM side of the internal ethernet link.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 4 }
+
+ intEthernetInterfaceDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ enet10Megabit(3),
+ enet100Megabit(4),
+ autoSpeed(5)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Specifies the data transfer rate to be used over the ethernet
+ interface: 10Mb, 100Mb, or Auto.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 5 }
+
+ intEthernetInterfaceDuplexSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ fullDuplex(1),
+ halfDuplex(2),
+ autoDuplex(3)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Specifies the duplex settings for the data transfer rate to be used over
+ the ethernet interface: Half, Full, or Auto.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 6 }
+
+ intEthernetInterfaceLAA OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(17))
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Specifies the locally administered MAC address. The locally administered
+ address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This
+ value must be in the form XX:XX:XX:XX:XX:XX where 'X' is a number between 0 - 9 and
+ A - F. This MM subsystem does not allow use of a multicast address. A multicast
+ address has the least significant bit of the first byte set to a 1. The first
+ byte must, therefore, be an even number.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 7 }
+
+ intEthernetInterfaceGatewayIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Contains the IP address of the gateway/router for the ethernet
+ interface.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 9 }
+
+ intEthernetInterfaceBIA OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(17))
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Specifies the burned-in MAC (BIA) address.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 10 }
+
+ intEthernetInterfaceMTU OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Contains the Maximum Transmission Unit (MTU) for the ethernet
+ interface
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 13 }
+
+ intEthernetInterfaceSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Contains the subnet mask for the ethernet interface.
+
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { intEthernetInterface 14 }
+ -- ********************************************************************************
+ -- Standby Ethernet Interface 1
+ -- ********************************************************************************
+ standbyExtEthernetInterface OBJECT IDENTIFIER ::= { networkInterfaces 3 }
+ standbyExtEthernetInterfaceType OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The type of interface. Indicates 'Ethernet-1'.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 1 }
+
+ standbyExtEthernetInterfaceHostName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the 64 byte null terminated DNS host name for this
+ interface.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 3 }
+
+ standbyExtEthernetInterfaceIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the IP address for the ethernet interface.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 4 }
+
+ standbyExtEthernetInterfaceDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ enet10Megabit(3),
+ enet100Megabit(4),
+ autoSpeed(5),
+ enet1GigabitAuto(6)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the data transfer rate to be used over the ethernet
+ interface: 10Mb, 100Mb, 1G Auto or Auto.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM.
+
+ Note that not all AMM hardware supports the 1G Auto speed. If it does not
+ and a SET of this value is attempted, it will be rejected with a
+ badValue return code.
+
+ When a user selects the 1G Auto setting, the duplex setting will be forced to
+ fullDuplex."
+ ::= { standbyExtEthernetInterface 5 }
+
+ standbyExtEthernetInterfaceDuplexSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ fullDuplex(1),
+ halfDuplex(2),
+ autoDuplex(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the duplex settings for the data transfer rate to be used over
+ the ethernet interface: Half, Full, or Auto.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM.
+
+ When a user selects the 1G Auto speed setting, the duplex setting will be forced to
+ fullDuplex."
+ ::= { standbyExtEthernetInterface 6 }
+
+ standbyExtEthernetInterfaceLAA OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(17))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the locally administered MAC address. The locally administered
+ address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF.
+ This value must be in the form XX:XX:XX:XX:XX:XX where 'X' is a number between 0 - 9 and A - F.
+ This MM subsystem does not allow use of a multicast address.
+ A multicast address has the least significant bit of the first byte set to a 1. The first
+ byte must, therefore, be an even number.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM.
+ NOTE: Although the locally administered MAC address can be assigned the same value
+ for the primary and backup AMM, it is not recommended."
+ ::= { standbyExtEthernetInterface 7 }
+
+ standbyExtEthernetInterfaceDhcpEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ dhcpDisabled(0),
+ dhcpEnabled(1),
+ tryDhcpThenTryStatic(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable DHCP on this interface.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 8 }
+
+ standbyExtEthernetInterfaceGatewayIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the IP address of the gateway/router for the ethernet
+ interface.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 9 }
+
+ standbyExtEthernetInterfaceBIA OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(17))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the burned-in MAC (BIA) address.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 10 }
+
+ standbyExtEthernetInterfaceMTU OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the Maximum Transmission Unit (MTU) for the ethernet
+ interface.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 13 }
+
+ standbyExtEthernetInterfaceSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the subnet mask for the ethernet interface.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 14 }
+
+ advancedFailover OBJECT-TYPE
+ SYNTAX INTEGER{
+ off(0),
+ ipnoswap(1),
+ ipswap(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User can enable advanced failover.
+ off : no standby network interface
+ ipswap: Standby network interface, swap IPs during failover
+ ipnoswap: Standby network interface, no swap IPs during failover.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyExtEthernetInterface 15 }
+
+ -- ********************************************************************************
+ -- DHCP Server Assigned Settings for standby ethernet interface 1
+ -- ********************************************************************************
+
+ standbyDhcpEthernetInterface OBJECT IDENTIFIER ::= { standbyExtEthernetInterface 16 }
+
+ standbyDhcpHostName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the 64 byte null terminated DNS host name for this
+ interface, assigned by the DHCP server.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 1 }
+
+ standbyDhcpIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the IP address for the ethernet interface,
+ assigned by the DHCP server.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 2 }
+
+ standbyDhcpGatewayIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the IP address of the gateway/router for the ethernet
+ interface, assigned by the DHCP server.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 3 }
+
+ standbyDhcpSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the Subnet Mask for the ethernet
+ interface, assigned by the DHCP server.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 4 }
+
+ standbyDhcpDomainName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the 64 byte null terminated Domain Name for this
+ interface, assigned by the DHCP server.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 5 }
+
+ standbyDhcpDHCPServer OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the DHCP server IP address used to acquire the
+ DHCP settings.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 6 }
+
+ standbyDhcpPrimaryDNSServer OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the Primary DNS server, assigned by the DHCP server.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 7 }
+
+ standbyDhcpSecondaryDNSServer OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the Secondary DNS server, assigned by the DHCP server.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 8 }
+
+ standbyDhcpTertiaryDNSServer OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the tertiary DNS server, assigned by the DHCP server.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { standbyDhcpEthernetInterface 9 }
+
+ -- ********************************************************************************
+ -- Ethernet Interface IPv6
+ -- ********************************************************************************
+ extEthernetInterfaceIPv6 OBJECT IDENTIFIER ::= { networkInterfaces 4 }
+
+ extEthernetInterfaceIPv6Type OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The type of interface. Indicates 'Ethernet-1'."
+ ::= { extEthernetInterfaceIPv6 1 }
+
+ extEthernetInterfaceIPv6Enabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The current IPv6 enabled or disabled state of this AMM.
+
+ NOTE: If IPv6 address(es) have been configured for one or more
+ interfaces/protocols/services on this AMM, when you update
+ the firmware to a level which does not support IPv6, all IPv6
+ connectivity will be lost, and services/interfaces for which an IPv6
+ address was configured may not function properly. You will be required
+ to reconfigure these services/interfaces."
+ ::= { extEthernetInterfaceIPv6 2 }
+
+ extEthernetInterfaceIPv6Config OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6 5 }
+
+ extEthernetInterfaceIPv6LocalAddress OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6Config 1 }
+
+ extEthernetInterfaceIPv6LinkLocalAddress OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 link local IP address for the ethernet interface.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
+ object has the value '0:0:0:0:0:0:0:0'."
+ ::= { extEthernetInterfaceIPv6LocalAddress 1 }
+
+ extEthernetInterfaceIPv6StaticIPConfig OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6Config 2 }
+
+ extEthernetInterfaceIPv6StaticIPConfigEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disabled(0), enabled(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 static IP address enabled or disabled state for the ethernet interface."
+ ::= { extEthernetInterfaceIPv6StaticIPConfig 1 }
+
+ extEthernetInterfaceIPv6StaticIPAddress OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 static IP address for the ethernet interface.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
+ object has the value '0:0:0:0:0:0:0:0'."
+ ::= { extEthernetInterfaceIPv6StaticIPConfig 2 }
+
+ extEthernetInterfaceIPv6StaticIPAddressPrefixLen OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 static IP address prefix length for the ethernet interface.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
+ object has the value 0."
+ ::= { extEthernetInterfaceIPv6StaticIPConfig 3 }
+
+ extEthernetInterfaceIPv6StaticIPDefaultRoute OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 static IP address default route for the ethernet interface.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
+ object has the value '0:0:0:0:0:0:0:0'."
+ ::= { extEthernetInterfaceIPv6StaticIPConfig 4 }
+
+ extEthernetInterfaceIPv6AutoIPConfig OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6Config 3 }
+
+ extEthernetInterfaceIPv6AutoIPConfigEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 automatic IP configuration enabled or disabled state for the ethernet interface.
+
+ NOTE: extEthernetInterfaceIPv6AutoIPConfigEnabled is the logical OR of extEthernetInterfaceDHCPv6Enabled
+ and extEthernetInterfaceIPv6StatelessAutoConfigEnabled settings.
+ NOTE: Enabling/Disabling extEthernetInterfaceIPv6AutoIPConfigEnabled will cause both
+ extEthernetInterfaceDHCPv6Enabled and extEthernetInterfaceIPv6StatelessAutoConfigEnabled to be enabled/disabled.
+ NOTE: extEthernetInterfaceIPv6StaticIPConfigEnabled and extEthernetInterfaceIPv6AutoIPConfigEnabled
+ cannot be disabled at the same time."
+ ::= { extEthernetInterfaceIPv6AutoIPConfig 1 }
+
+ extEthernetInterfaceDHCPv6Config OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6AutoIPConfig 2 }
+
+ extEthernetInterfaceDHCPv6Enabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The DHCPv6 enabled or disabled state for the ethernet interface.
+
+ NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled is currently disabled, Disabling
+ extEthernetInterfaceDHCPv6Enabled will cause extEthernetInterfaceIPv6AutoIPConfigEnabled to be disabled.
+ NOTE: If extEthernetInterfaceIPv6StaticIPConfigEnabled and
+ extEthernetInterfaceIPv6StatelessAutoConfigEnabled are currently disabled, Disabling
+ extEthernetInterfaceDHCPv6Enabled will not be allowed."
+ ::= { extEthernetInterfaceDHCPv6Config 1 }
+
+ extEthernetInterfaceDHCPv6IPAddress OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 address for the ethernet interface, assigned by DHCPv6 server.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
+ is disabled or if DHCPv6 server is not available, this object has the value
+ '0:0:0:0:0:0:0:0'."
+ ::= { extEthernetInterfaceDHCPv6Config 2 }
+
+ extEthernetInterfaceDHCPv6DomainName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The 64 byte Domain Name for the ethernet interface,
+ assigned by the DHCPv6 server.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
+ is disabled or if DHCPv6 server is not available, this object has the
+ value '(Not available)'."
+ ::= { extEthernetInterfaceDHCPv6Config 4 }
+
+ extEthernetInterfaceDHCPv6PrimaryDNSServer OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The primary DNS server, assigned by the DHCPv6 server.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
+ is disabled or if DHCPv6 server is not available, this object has the
+ value '0:0:0:0:0:0:0:0'."
+ ::= { extEthernetInterfaceDHCPv6Config 5 }
+
+ extEthernetInterfaceDHCPv6SecondaryDNSServer OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The secondary DNS server, assigned by the DHCPv6 server.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
+ is disabled or if DHCPv6 server is not available, this object has the
+ value '0:0:0:0:0:0:0:0'."
+ ::= { extEthernetInterfaceDHCPv6Config 6 }
+
+ extEthernetInterfaceDHCPv6TertiaryDNSServer OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The tertiary DNS server, assigned by the DHCPv6 server.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
+ is disabled or if DHCPv6 server is not available, this object has the
+ value '0:0:0:0:0:0:0:0'."
+ ::= { extEthernetInterfaceDHCPv6Config 7 }
+
+ extEthernetInterfaceDHCPv6Server OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The DHCPv6 server IPv6 address used to acquire the DHCP settings.
+
+ NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled
+ is disabled or if DHCPv6 server is not available, this object has the
+ value '0:0:0:0:0:0:0:0'."
+ ::= { extEthernetInterfaceDHCPv6Config 8 }
+
+ extEthernetInterfaceIPv6StatelessAutoConfig OBJECT IDENTIFIER ::= { extEthernetInterfaceIPv6AutoIPConfig 3 }
+
+ extEthernetInterfaceIPv6StatelessAutoConfigEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disabled(0), enabled(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 stateless auto-configuration enabled or disabled state for the ethernet interface.
+
+ NOTE: If extEthernetfInterfaceDHCPv6Enabled is currently disabled, Disabling
+ extEthernetInterfaceIPv6StatelessAutoConfigEnabled will cause extEthernetInterfaceIPv6AutoIPConfigEnabled
+ to be disabled."
+ ::= { extEthernetInterfaceIPv6StatelessAutoConfig 1 }
+
+ extEthernetInterfaceStatelessAutoConfigAddressesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ExtEthernetInterfaceStatelessAutoConfigAddressesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of stateless Auto-Config addresses entries"
+ ::= { extEthernetInterfaceIPv6StatelessAutoConfig 2 }
+
+ extEthernetInterfaceStatelessAutoConfigAddressesEntry OBJECT-TYPE
+ SYNTAX ExtEthernetInterfaceStatelessAutoConfigAddressesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Stateless Auto-Config address entries"
+ INDEX { extEthernetInterfaceStatelessAutoConfigAddressesIndex }
+ ::= { extEthernetInterfaceStatelessAutoConfigAddressesTable 1 }
+
+ ExtEthernetInterfaceStatelessAutoConfigAddressesEntry ::= SEQUENCE {
+ extEthernetInterfaceStatelessAutoConfigAddressesIndex INTEGER,
+ extEthernetInterfaceStatelessAutoConfigAddresses InetAddressIPv6,
+ extEthernetInterfaceStatelessAutoConfigAddressesPrefixLen INTEGER
+ }
+
+ extEthernetInterfaceStatelessAutoConfigAddressesIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for stateless Auto-Config addresses.
+
+ NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or
+ extEthernetInterfaceIPv6Enabled is currently disabled, this
+ object will show nothing."
+ ::= { extEthernetInterfaceStatelessAutoConfigAddressesEntry 1 }
+
+ extEthernetInterfaceStatelessAutoConfigAddresses OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The stateless Auto-Configuration IPv6 address.
+
+ NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or
+ extEthernetInterfaceIPv6Enabled is currently disabled, this
+ object will show nothing."
+ ::= { extEthernetInterfaceStatelessAutoConfigAddressesEntry 2 }
+
+ extEthernetInterfaceStatelessAutoConfigAddressesPrefixLen OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The stateless Auto-Configration address prefix length.
+
+ NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or
+ extEthernetInterfaceIPv6Enabled is currently disabled, this
+ object will show nothing."
+ ::= { extEthernetInterfaceStatelessAutoConfigAddressesEntry 3 }
+
+ standbyExtEthernetInterfaceIPv6 OBJECT IDENTIFIER ::= { networkInterfaces 5 }
+
+ standbyEthernetInterfaceIPv6LocalAddress OBJECT IDENTIFIER ::= { standbyExtEthernetInterfaceIPv6 1 }
+
+ standbyEthernetInterfaceIPv6LinkLocalAddress OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 link local IP address for the standby AMM."
+ ::= { standbyEthernetInterfaceIPv6LocalAddress 1 }
+
+ standbyEthernetInterfaceIPv6StaticIPConfig OBJECT IDENTIFIER ::= { standbyExtEthernetInterfaceIPv6 2 }
+
+ standbyEthernetInterfaceIPv6StaticIPConfigEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 static IP address state for the AMM.
+
+ NOTE: This value may be altered through the
+ extEthernetInterfaceIPv6StaticIPConfigEnabled object."
+ ::= { standbyEthernetInterfaceIPv6StaticIPConfig 1 }
+
+ standbyEthernetInterfaceIPv6StaticIPAddress OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 static IP address for the standby AMM
+
+ NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this
+ object has the value '0:0:0:0:0:0:0:0'."
+ ::= { standbyEthernetInterfaceIPv6StaticIPConfig 2 }
+
+ standbyEthernetInterfaceIPv6StaticIPAddressPrefixLen OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 static IP address prefix length for the standyby AMM.
+
+ NOTE: This value may be altered through the
+ extEthernetInterfaceIPv6StaticIPAddressPrefixLen object."
+ ::= { standbyEthernetInterfaceIPv6StaticIPConfig 3 }
+
+ standbyEthernetInterfaceIPv6StaticIPDefaultRoute OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 static IP address default route for the standby AMM.
+
+ NOTE: This value may be altered through the
+ extEthernetInterfaceIPv6StaticIPDefaultRoute object."
+ ::= { standbyEthernetInterfaceIPv6StaticIPConfig 4 }
+
+ standbyEthernetInterfaceDHCPv6Config OBJECT IDENTIFIER ::= { standbyExtEthernetInterfaceIPv6 3 }
+
+ standbyEthernetInterfaceDHCPv6Enabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The DHCPv6 enabled or disabled state for the standby AMM.
+
+ NOTE: This field may be altered through the
+ extEthernetInterfaceDHCPv6Enabled object."
+ ::= { standbyEthernetInterfaceDHCPv6Config 1 }
+
+ standbyEthernetInterfaceDHCPv6IPAddress OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 address for the standby AMM assigned by DHCPv6 server."
+ ::= { standbyEthernetInterfaceDHCPv6Config 2 }
+
+ standbyEthernetInterfaceDHCPv6DomainName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The 64 byte Domain Name for the standby AMM
+ assigned by the DHCPv6 server."
+ ::= { standbyEthernetInterfaceDHCPv6Config 4 }
+
+ standbyEthernetInterfaceStatelessAutoConfigAddressesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StandbyEthernetInterfaceStatelessAutoConfigAddressesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of stateless Auto-Config addresses entries.
+
+ NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or
+ extEthernetInterfaceIPv6Enabled is currently disabled, this
+ table will show nothing."
+ ::= { standbyExtEthernetInterfaceIPv6 4 }
+
+ standbyEthernetInterfaceStatelessAutoConfigAddressesEntry OBJECT-TYPE
+ SYNTAX StandbyEthernetInterfaceStatelessAutoConfigAddressesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Stateless Auto-Config address entries"
+ INDEX { standbyEthernetInterfaceStatelessAutoConfigAddressesIndex }
+ ::= { standbyEthernetInterfaceStatelessAutoConfigAddressesTable 1 }
+
+ StandbyEthernetInterfaceStatelessAutoConfigAddressesEntry ::= SEQUENCE {
+ standbyEthernetInterfaceStatelessAutoConfigAddressesIndex INTEGER,
+ standbyEthernetInterfaceStatelessAutoConfigAddresses InetAddressIPv6,
+ standbyEthernetInterfaceStatelessAutoConfigAddressesPrefixLen INTEGER
+ }
+
+ standbyEthernetInterfaceStatelessAutoConfigAddressesIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for stateless Auto-Config addresses."
+ ::= { standbyEthernetInterfaceStatelessAutoConfigAddressesEntry 1 }
+
+ standbyEthernetInterfaceStatelessAutoConfigAddresses OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The stateless Auto-Configuration IPv6 address."
+ ::= { standbyEthernetInterfaceStatelessAutoConfigAddressesEntry 2 }
+
+ standbyEthernetInterfaceStatelessAutoConfigAddressesPrefixLen OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The stateless Auto-Configration address prefix length."
+ ::= { standbyEthernetInterfaceStatelessAutoConfigAddressesEntry 3 }
+
+
+ ddnsStatus OBJECT-TYPE
+ SYNTAX INTEGER { disabled(0), enabled(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Dynamic DNS provides the capability for a networked device
+ to notify a domain name server to change, in real time, the
+ active DNS configuration of its configured hostnames, addresses
+ or other information stored in DNS. With Dynamic DNS, host
+ computers gain the capability to notify their respective DNS
+ server of the IP address they have received from a DHCP server
+ or through self-configuration."
+ ::= { networkInterfaces 10 }
+
+ hostName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the DNS host name for this system. This object
+ provides the exact same function as extEthernetInterfaceHostName"
+ ::= { networkInterfaces 11 }
+ standbyHostName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the DNS host name for the standby. This object
+ provides the exact same function as standbyExtEthernetInterfaceHostName
+ and is only applicable to systems with a standby MM."
+ ::= { networkInterfaces 12 }
+
+ domainName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The user assigned DNS domain name."
+ ::= { networkInterfaces 13 }
+ standbyDomainName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The user assigned DNS domain name of the standby. This is only
+ applicable to systems with a standby MM."
+ ::= { networkInterfaces 14 }
+
+ vlanConfigure OBJECT IDENTIFIER ::= { networkInterfaces 20 }
+
+ vlanGlobalState OBJECT-TYPE
+ SYNTAX INTEGER { disable(0), enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object disables or enables the VLAN feature. The
+ configuration objects for the VLAN are in the
+ table, vlanTable.
+
+ The default setting for this object is disable(0).
+
+ IMPORTANT NOTE: Any change to this object will revert
+ back to its previous value if the change is not
+ committed by setting the object vlanCommitState to
+ executeCommit(3) within the number of minutes indicated
+ in the object vlanCommitTimeout."
+ ::= { vlanConfigure 1 }
+
+ vlanCommitTimeout OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object is the number of minutes from the last
+ VLAN-related object change until any non-committed changes
+ will revert back to their previous settings.
+
+ This means if a user makes a change that disrupts TCP/IP
+ access to the CMM, the change will revert back to its
+ previous setting after the number of minutes in this
+ object. This allows the user to access the CMM again
+ if access is lost through an unintended VLAN setting.
+
+ Once the changes are committed using the object,
+ vlanCommitState, setting it to executeCommit(3), the
+ changes will be saved in non-volatile memory.
+
+ The amount of time before uncommitted changes revert back
+ to their previous settings starts from the last change made
+ to any VLAN-related object. If no other change is made,
+ the user has this number of minutes (the number in this
+ object) to commit the changes with vlanCommitState before
+ the changes will revert back.
+
+ The default setting for this object is 2 minutes.
+
+ IMPORTANT NOTE: Any change to this object will revert
+ back to its previous value if the change is not
+ committed by setting the object vlanCommitState to
+ executeCommit(3) within the number of minutes indicated
+ in the object vlanCommitTimeout."
+ ::= { vlanConfigure 2 }
+
+ vlanCommitState OBJECT-TYPE
+ SYNTAX INTEGER { noChangesPending(1), commitNeeded(2), executeCommit(3) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object gives the status of whether there are
+ VLAN-related changes pending that need to be committed,
+ and allows a user to commit (save) any VLAN changes.
+
+ If changes are pending, reading this object will give
+ a value of commitNeeded(2). If no changes are pending,
+ this object will have the value of noChangesPending(1).
+
+ To save any VLAN-related changes so they do not revert
+ back to previous settings, set this object to
+ executeCommit(3) whenever this object has a value of
+ commitNeeded(2)."
+ ::= { vlanConfigure 3 }
+
+ vlanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF VlanEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains the VLAN configuration objects.
+ The default entry has an vlanEntryIndex equal to 1.
+ The objects for this default entry are configurable.
+
+ An additional VLAN entry may be added by setting the
+ object, vlanEntryStatus, at vlanEntryIndex=2 to the value
+ of createRequest(2) and also setting the object,
+ vlanEntryVlanId, at vlanEntryIndex=2 to a valid, unique
+ value.
+
+ IMPORTANT NOTE: Any changes to the object of this table
+ will revert back to their previous settings if the
+ changes are not committed by setting the object
+ vlanCommitState to executeCommit(3) within the number of
+ minutes indicated in the object vlanCommitTimeout."
+ ::= { vlanConfigure 20 }
+
+ vlanEntry OBJECT-TYPE
+ SYNTAX VlanEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "VLAN entries."
+ INDEX { vlanEntryIndex }
+ ::= { vlanTable 1 }
+
+
+ VlanEntry ::= SEQUENCE {
+ vlanEntryIndex INTEGER,
+ vlanEntryVlanId INTEGER,
+ vlanEntryName OCTET STRING,
+ vlanEntryStatus EntryStatus,
+ vlanEntryState INTEGER,
+ vlanEntrySOLAccess INTEGER,
+ vlanEntrycKVMAccess INTEGER,
+ vlanEntryTagging INTEGER,
+ vlanEntryIOModuleAccess INTEGER,
+ vlanEntryVlanDefault INTEGER,
+ vlanEntryIPv4StaticAddress IpAddress,
+ vlanEntryIPv4StaticGateway IpAddress,
+ vlanEntryIPv4StaticMask IpAddress,
+ vlanEntryIPv4SubnetRoute1 IpAddress,
+ vlanEntryIPv4SubnetRouteMask1 IpAddress,
+ vlanEntryIPv4SubnetRoute2 IpAddress,
+ vlanEntryIPv4SubnetRouteMask2 IpAddress,
+ vlanEntryIPv4SubnetRoute3 IpAddress,
+ vlanEntryIPv4SubnetRouteMask3 IpAddress
+ }
+
+ vlanEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for VLAN entry. If vlanEntryIndex is equal to 1,
+ it is the Default VLAN entry and cannot be deleted."
+ ::= { vlanEntry 1 }
+
+ vlanEntryVlanId OBJECT-TYPE
+ SYNTAX INTEGER (1..4094)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Valid VLAN ID. Allowed values are 1..4094. If the entry
+ is not valid, this object will have the value of 0.
+
+ If this entry has the vlanEntryIndex value of 1 (default
+ VLAN entry), then setting this object will take effect
+ immediately. For other entries, when this object is set,
+ this entry must have the object, vlanEntryState set to
+ enable(1) or restart(2) for this change to take effect."
+ ::= { vlanEntry 2 }
+
+ vlanEntryName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..31))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object allows the user to configure a text string
+ name for this VLAN entry. This entry name is only used
+ as a label for this entry."
+ ::= { vlanEntry 3 }
+
+ vlanEntryStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object manages the creation and deletion of this
+ entry.
+ The steps recommended to add a new VLAN entry are:
+ 1. Create a new entry in this table
+ vlanEntryStatus = createRequest
+ 2. Set vlanEntryVlanId as required.
+ Then the entry will be valid.
+
+ valid(1) - Indicates that this entry is available
+ for use.
+
+ createRequest(2) - A new entry will be created in this
+ table and will transition to the
+ vlanEntryStatus value of
+ underCreation(3).
+
+ underCreation(3) - Indicates that this entry exists in the
+ agent but is unavailable for use. After
+ completing the create operation, the
+ agent will set this object to the value
+ underCreation(3).
+
+ invalid(4) - Deletes this entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) cannot be deleted."
+ ::= { vlanEntry 4 }
+
+ vlanEntryState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1),
+ restart(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object indicates whether this VLAN entry is enabled
+ or disabled and allows the user to disable, enable or
+ restart this entry except for the exceptions noted below.
+
+ The entry with a vlanEntryIndex value of 1 (default VLAN
+ entry) will always have this object set to enable(1) and
+ cannot be set to any other value. Other table entries do
+ not have this restriction.
+
+ Some other objects in this table may not take effect after
+ a change until either this object is: set to enable(1) if
+ this object currently has the value of disable(0), or set
+ to restart(2) if this object currently has the value of
+ enable(1). The other objects in this table that require
+ this object be set to enable(1) or restart(2) after a
+ change are noted in the description for those objects."
+ ::= { vlanEntry 5 }
+
+ vlanEntrySOLAccess OBJECT-TYPE
+ SYNTAX INTEGER { disable(0), enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object allows the user to set whether the VLAN
+ for this entry will have access to the Serial Over
+ LAN (SOL) interface.
+
+ Only one VLAN entry may have this object set to enable(1).
+
+ By default, the entry with the vlanEntryIndex value of 1
+ (default VLAN entry) will have this object set to
+ enable(1).
+
+ To set this object to enable(1) on another entry, this
+ object must first be set to disable(0) on any entry
+ that has this object set to enable(1)."
+ ::= { vlanEntry 6 }
+
+ vlanEntrycKVMAccess OBJECT-TYPE
+ SYNTAX INTEGER { disable(0), enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object allows the user to set whether the VLAN
+ for this entry will have access to the installed cards
+ for concurrent keyboard, video, and mouse (cKVM).
+
+ Only one VLAN entry may have this object set to enable(1).
+
+ By default, the entry with the vlanEntryIndex value of 1
+ (default VLAN entry) will have this object set to
+ enable(1).
+
+ To set this object to enable(1) on another entry, this
+ object must first be set to disable(0) on any entry
+ that has this object set to enable(1)."
+ ::= { vlanEntry 7 }
+
+ vlanEntryTagging OBJECT-TYPE
+ SYNTAX INTEGER { disable(0), enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object allows the user to set whether VLAN tagging
+ is enabled for this VLAN entry.
+
+ This object is only configurable for the entry with the
+ vlanEntryIndex value of 1.
+
+ By default, the entry with the vlanEntryIndex value of 1
+ (default VLAN entry) will have this object set to
+ disable(0), all other entries will have this object set to
+ enable(1)."
+ ::= { vlanEntry 8 }
+
+ vlanEntryIOModuleAccess OBJECT-TYPE
+ SYNTAX INTEGER { disable(0), enable(1) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This read-only object indicates whether the VLAN
+ for this entry will have access to the IO Modules.
+
+ Only the VLAN entry with the vlanEntryIndex value of 1
+ will report this object with the value of enable(1),
+ all other entries will have a value of disable(0)."
+ ::= { vlanEntry 9 }
+
+ vlanEntryVlanDefault OBJECT-TYPE
+ SYNTAX INTEGER { false(0), true(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object specifies which vlanTable entry is the
+ 'default entry'. By default, the entry with the
+ vlanEntryIndex value of 1 will have this object set to
+ true(1).
+
+ Only one vlanTable entry can be designated as the VLAN
+ default entry. Setting this object to true(1) for an
+ entry will make this object false(0) for all other
+ vlanTable entries.
+
+ Only the vlanTable entry with this object set to true(1)
+ will allow the vlanEntryTagging object to be configurable
+ for this vlanEntryIndex index."
+ ::= { vlanEntry 10 }
+
+ vlanEntryIPv4StaticAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the IP address for this VLAN entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will have this object set to the IP address of the
+ ethernet interface. The IP address of the default VLAN
+ entry can only change by changing the IP address of the
+ ethernet interface.
+
+ For all other VLAN entries, this object may be set to any
+ IP address except the IP address of the ethernet
+ interface.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 31 }
+
+ vlanEntryIPv4StaticGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the IP address for the IP gateway
+ for this VLAN entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will have this object set to the IP gateway for the
+ ethernet interface. The IP address of the default VLAN
+ entry can only change by changing the IP gateway of the
+ ethernet interface.
+
+ For all other VLAN entries, this object may be set to any
+ IP address except the IP address of the ethernet
+ interface.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 32 }
+
+ vlanEntryIPv4StaticMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the subnet mask for this VLAN entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will have this object set to the subnet mask of the
+ ethernet interface. The subnet mask of the default VLAN
+ entry can only change by changing the subnet mask of the
+ ethernet interface.
+
+ For all other VLAN entries, this object may be set to any
+ valid subnet mask.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 33 }
+
+ vlanEntryIPv4SubnetRoute1 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the IP address of the subnet route 1 for
+ this VLAN entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will always have this object set to 0.0.0.0.
+
+ For all other VLAN entries, this object may be set to any
+ valid subnet route.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 51 }
+
+ vlanEntryIPv4SubnetRouteMask1 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the subnet route mask 1 for this VLAN
+ entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will always have this object set to 0.0.0.0.
+
+ For all other VLAN entries, this object may be set to any
+ valid subnet mask.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 52 }
+
+
+ vlanEntryIPv4SubnetRoute2 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the IP address of the subnet route 2 for
+ this VLAN entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will always have this object set to 0.0.0.0.
+
+ For all other VLAN entries, this object may be set to any
+ valid subnet route.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 53 }
+
+ vlanEntryIPv4SubnetRouteMask2 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the subnet route mask 2 for this VLAN
+ entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will always have this object set to 0.0.0.0.
+
+ For all other VLAN entries, this object may be set to any
+ valid subnet mask.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 54 }
+
+
+ vlanEntryIPv4SubnetRoute3 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the IP address of the subnet route 3 for
+ this VLAN entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will always have this object set to 0.0.0.0.
+
+ For all other VLAN entries, this object may be set to any
+ valid subnet route.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 55 }
+
+ vlanEntryIPv4SubnetRouteMask3 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object sets the subnet route mask 3 for this VLAN
+ entry.
+
+ The entry with the vlanEntryIndex value of 1 (default VLAN
+ entry) will always have this object set to 0.0.0.0.
+
+ For all other VLAN entries, this object may be set to any
+ valid subnet mask.
+
+ For a change of this object to take effect, the object,
+ vlanEntryState, must be set to enable(1) if the
+ vlanEntryState is currently disable(0), or set to
+ restart(2) if the vlanEntryState is currently enable(1)."
+ ::= { vlanEntry 56 }
+
+
+ -- ********************************************************************************
+ -- TCP/IP Protocol Configuration
+ -- ********************************************************************************
+ tcpProtocols OBJECT IDENTIFIER ::= { networkConfiguration 3 }
+
+ -- ********************************************************************************
+ -- SNMP Agent Configuration
+ -- ********************************************************************************
+ snmpAgentConfig OBJECT IDENTIFIER ::= { tcpProtocols 1 }
+
+
+ snmpSystemContact OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..48))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 48 byte string that contains the
+ SNMP agent contact name."
+ ::= { snmpAgentConfig 1 }
+
+ snmpSystemLocation OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..48))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 48 byte string that contains the
+ SNMP agent location name."
+ ::= { snmpAgentConfig 2 }
+
+ snmpSystemAgentTrapsDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ trapsEnabled(0),
+ trapsDisabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable SNMP traps."
+ ::= { snmpAgentConfig 3 }
+
+ -- ********************************************************************************
+ -- SNMP Agent Community Configuration
+ -- ********************************************************************************
+ snmpAgentCommunityConfig OBJECT IDENTIFIER ::= { snmpAgentConfig 4 }
+
+
+ -- ********************************************************************************
+ -- SNMP Community Configuration table
+ -- ********************************************************************************
+
+ snmpCommunityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SnmpCommunityEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of SNMP Community entries"
+ ::= { snmpAgentCommunityConfig 1 }
+
+ snmpCommunityEntry OBJECT-TYPE
+ SYNTAX SnmpCommunityEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP community entries"
+ INDEX { snmpCommunityEntryIndex }
+ ::= { snmpCommunityTable 1 }
+
+ SnmpCommunityEntry ::= SEQUENCE {
+ snmpCommunityEntryIndex INTEGER,
+ snmpCommunityEntryCommunityName OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress1 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress2 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress3 OCTET STRING,
+ snmpCommunityEntryCommunityViewType INTEGER,
+ snmpCommunityEntryCommunityIpAddress4 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress5 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress6 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress7 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress8 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress9 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress10 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress11 OCTET STRING,
+ snmpCommunityEntryCommunityIpAddress12 OCTET STRING
+ }
+
+
+ snmpCommunityEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for SNMP Agent Community entry."
+ ::= { snmpCommunityEntry 1 }
+
+ snmpCommunityEntryCommunityName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..15))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community entry name."
+ ::= { snmpCommunityEntry 2 }
+
+ snmpCommunityEntryCommunityIpAddress1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 3 }
+
+ snmpCommunityEntryCommunityIpAddress2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 4 }
+
+ snmpCommunityEntryCommunityIpAddress3 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 5 }
+
+
+ snmpCommunityEntryCommunityViewType OBJECT-TYPE
+ SYNTAX INTEGER {
+ read-Traps(1),
+ write-Read-Traps(2),
+ traps-Only(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Access Level of the SNMPv1 managers. Note this parameter
+ is set for each community. Therefore all three managers
+ in the same community have the same access level."
+ ::= { snmpCommunityEntry 6 }
+
+
+ snmpCommunityEntryCommunityIpAddress4 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 7 }
+
+ snmpCommunityEntryCommunityIpAddress5 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 8 }
+
+ snmpCommunityEntryCommunityIpAddress6 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 9 }
+
+ snmpCommunityEntryCommunityIpAddress7 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 10 }
+
+ snmpCommunityEntryCommunityIpAddress8 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 11 }
+
+ snmpCommunityEntryCommunityIpAddress9 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 12 }
+
+ snmpCommunityEntryCommunityIpAddress10 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 13 }
+
+ snmpCommunityEntryCommunityIpAddress11 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 14 }
+
+ snmpCommunityEntryCommunityIpAddress12 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Community IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name. This field also allows two
+ wildard values for read-Traps and write-Read-Traps communities:
+ 0.0.0.0 - allow any IPv4 address
+ 0::0 - allow any IPv6 address"
+ ::= { snmpCommunityEntry 15 }
+
+ snmpv1SystemAgentEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable the SNMPv1 agent.
+
+ NOTE: Restart the management module if this MIB object is changed
+ with respect to the value at system bootup time. For example the
+ SNMPv1 agent was set to disabled at system bootup time and now
+ it is enabled. Then restarting the remote supervisor adaptor is
+ required.
+
+ Also note that when attempting to enable this agent,
+ the following are verified:
+ (1) Is there a valid system contact
+ (2) Is there a valid system name
+ (3) Is there at least one valid community name and for that
+ community name is there one valid IP address or hostname
+ (4) Are all defined community names unique
+
+ If this verification fails an error response will be returned
+ and the SNMPv1 agent will be left disabled."
+ ::= { snmpAgentConfig 5 }
+
+ snmpv3SystemAgentEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable the SNMPv3 agent.
+
+ NOTE: Restart the management module if this MIB object is changed
+ with respect to the value at system bootup time. For example the
+ SNMPv3 agent was set to disabled at system bootup time and now
+ it is enabled. Then restarting the remote supervisor adaptor is
+ required.
+
+ Also note that when attempting to enable this agent,
+ the following are verified:
+ (1) Is there a valid system contact?
+ (2) Is there a valid system name?
+
+ If this verification fails an error response will be returned
+ and the SNMPv3 agent will be left disabled."
+
+ ::= { snmpAgentConfig 6 }
+
+ -- ********************************************************************************
+ -- SNMP Agent User Profile Configuration
+ -- ********************************************************************************
+
+ snmpAgentUserProfileConfig OBJECT IDENTIFIER ::= { snmpAgentConfig 9 }
+
+
+ -- ********************************************************************************
+ -- SNMP User Profile Configuration table
+ -- ********************************************************************************
+
+ snmpUserProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SnmpUserProfileEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of SNMPv3 User Profile entries"
+ ::= { snmpAgentUserProfileConfig 1 }
+
+ snmpUserProfileEntry OBJECT-TYPE
+ SYNTAX SnmpUserProfileEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP User Profile entries"
+ INDEX { snmpUserProfileEntryIndex }
+ ::= { snmpUserProfileTable 1 }
+
+ SnmpUserProfileEntry ::= SEQUENCE {
+ snmpUserProfileEntryIndex INTEGER,
+ snmpUserProfileEntryContextName OCTET STRING,
+ snmpUserProfileEntryAuthProt INTEGER,
+ snmpUserProfileEntryPrivProt INTEGER,
+ snmpUserProfileEntryPrivPassword OCTET STRING,
+ snmpUserProfileEntryViewType INTEGER,
+ snmpUserProfileEntryIpAddress OCTET STRING
+ }
+
+
+ snmpUserProfileEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for SNMPv3 Agent User Profile entry."
+ ::= { snmpUserProfileEntry 1 }
+
+ snmpUserProfileEntryContextName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..31))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMPv3 User Profile entry - Context name
+ for users to access MIB objects. Note that context names can be duplicates
+ and can be shared among users. Empty context names are allowed. The
+ default context name is the empty string."
+ ::= { snmpUserProfileEntry 3 }
+
+ snmpUserProfileEntryAuthProt OBJECT-TYPE
+ SYNTAX INTEGER {
+ none (1),
+ md5 (2),
+ sha (3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMPv3 User Profile entry - Authentication Protocol
+ supported by the user."
+ ::= { snmpUserProfileEntry 4 }
+
+ snmpUserProfileEntryPrivProt OBJECT-TYPE
+ SYNTAX INTEGER {
+ none (1),
+ des (2),
+ aes (4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMPv3 User Profile entry - Privacy Protocol
+ supported by the user. The Privacy Password must be set
+ and the Authentication Protocol must be md5 or sha
+ before this field may be set to des or aes."
+ ::= { snmpUserProfileEntry 6 }
+
+ snmpUserProfileEntryPrivPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..31))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMPv3 User Profile entry - Privacy password
+ for the user.
+
+ NOTE: Value returned for the GET command is
+ meaningless for this MIB object for security reasons."
+ ::= { snmpUserProfileEntry 7 }
+
+ snmpUserProfileEntryViewType OBJECT-TYPE
+ SYNTAX INTEGER {
+ read-Traps(1),
+ read-Write-Traps(2),
+ traps-Only(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMPv3 User Profile entry - Access level (Get, Set, and
+ Traps) of the user. "
+ ::= { snmpUserProfileEntry 8 }
+
+
+ snmpUserProfileEntryIpAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMPv3 User Profile entry - IP address or host name.
+ Can either be a dotted decimal IP string (e.g. 9.37.44.2)
+ or if DNS is enabled a host name."
+ ::= { snmpUserProfileEntry 9 }
+
+ -- ********************************************************************************
+ -- DNS Configuration
+ -- ********************************************************************************
+ dnsConfig OBJECT IDENTIFIER ::= { tcpProtocols 2 }
+
+ dnsEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ dnsDisabled(0),
+ dnsEnabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable the DNS agent.
+
+ NOTE: To alter any of the configuration settings for the DNS agent,
+ the following procedure should be used:
+ (1) This object should be set to 'disabled'
+ (2) Make the modifications to other settings
+ (3) This object should be set to 'enabled'
+ (4) Restart the management module
+
+ Also note that when attempting to enable this agent, it is verified
+ that there is at least one valid DNS server IP address. If this
+ verification fails, an error response will be returned and the DNS
+ agent will be left disabled."
+ ::= { dnsConfig 1 }
+
+ dnsServerIPAddress1 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the primary DNS server IP address."
+ ::= { dnsConfig 2 }
+
+ dnsServerIPAddress2 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the secondary DNS server IP address."
+ ::= { dnsConfig 3 }
+
+ dnsServerIPAddress3 OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the tertiary DNS server IP address."
+ ::= { dnsConfig 4 }
+ dnsServerIPv6Address1 OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the primary IPv6 DNS server address."
+ ::= { dnsConfig 12 }
+
+ dnsServerIPv6Address2 OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the secondary IPv6 DNS server address."
+ ::= { dnsConfig 13 }
+
+ dnsServerIPv6Address3 OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the tertiary IPv6 DNS server address."
+ ::= { dnsConfig 14 }
+
+ dnsPriority OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipv6(1),
+ ipv4(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Tells the order host names are resolved. The options are
+ to either first resolve with an IPv6 DNS server or to first
+ resolve with an IPv6 DNS server."
+ ::= { dnsConfig 20 }
+
+ -- ********************************************************************************
+ -- SMTP Configuration
+ -- ********************************************************************************
+ smtpConfig OBJECT IDENTIFIER ::= { tcpProtocols 3 }
+
+ smtpServerNameOrIPAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 64 byte string that contains the
+ SMTP server host name or IP address (a.b.c.d)."
+ ::= { smtpConfig 1 }
+
+ attachmentsToEmailAlerts OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAttachments(0),
+ attachServiceInformation(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if the service information should be attached to
+ an email alert."
+ ::= { smtpConfig 2 }
+
+ smtpEmailDomain OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated string that contains the
+ SMTP email domain. If this field is empty, the AMM IP
+ address is used as the domain. However, some SMTP
+ servers (e.g. - MS Exchange 2007) do not accept an IP address and
+ instead require a domain name. This object can be used to set that
+ email domain name."
+ ::= { smtpConfig 3 }
+
+
+ tcpApplicationConfig OBJECT IDENTIFIER ::= { tcpProtocols 4 }
+ telnetInactivityTimeout OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Default is 120 seconds. Value of zero is no timeout.
+ Max value is any positive 4 bytes value. Note that SSH also uses this
+ timeout value to wait before disconnecting inactive SSH connections."
+ ::= { tcpApplicationConfig 1 }
+
+ commandModeInactivityTimeout OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The amount of time in seconds before the (Secure)TCP Command Mode times out.
+ Default value of 0 means no timeout. Max value is any positive 4 byte value."
+ ::= { tcpApplicationConfig 2 }
+
+ secureCommandModeEnable OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set Secure TCP Command Mode number of connections.
+ AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
+ A value of 0 means disabled.
+ If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable.
+
+ NOTE: System Management Software requires this to be enabled for secure communication to the AMM."
+ ::= { tcpApplicationConfig 3 }
+
+ commandModeEnable OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set TCP Command Mode number of connections.
+ AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
+ A value of 0 means disabled.
+ NOTE: System Management Software requires this to be enabled for non-secure communication to the AMM."
+ ::= { tcpApplicationConfig 4 }
+
+ slpAddrType OBJECT-TYPE
+ SYNTAX INTEGER {
+ multicast(0),
+ broadcast(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when
+ slpAddrType is set to broadcast value then the multicast address set in
+ slpMulticastAddr will be ignored."
+ ::= { tcpApplicationConfig 5 }
+
+ slpMulticastAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Locator Protocol Multicast address"
+ ::= { tcpApplicationConfig 6 }
+
+ slpEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable Service Location Protocol.
+
+ NOTE: Change to Service Location Protocol will take
+ effect after the next restart of the MM."
+ ::= { tcpApplicationConfig 7}
+
+ telnetEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable telnet.
+ NOTE: Change to telnet enable/disable will take effect immediately."
+ ::= { tcpApplicationConfig 9 }
+
+ sshEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable SSH."
+ ::= { tcpApplicationConfig 10 }
+
+
+ sshVersion OBJECT-TYPE
+ SYNTAX INTEGER {
+ allVersions(0), -- deprecated
+ version2Only(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When SSH is enabled, this object allows the user to
+ configure whether the SSH server accepts all versions
+ of client connections or whether it restricts the
+ connectivity to the more secure version 2 only.
+
+ NOTE: Only SSH version 2 is supported now."
+ ::= { tcpApplicationConfig 11 }
+
+
+ sslServerEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable SSL Server."
+ ::= { tcpApplicationConfig 15 }
+
+
+ sslClientEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable SSL Client. If no valid client or server certificate is in place,
+ SSL client will not be allowed to set to enable."
+ ::= { tcpApplicationConfig 16 }
+
+
+ ftpEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable FTP."
+ ::= { tcpApplicationConfig 17 }
+
+
+ tftpEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable TFTP."
+ ::= { tcpApplicationConfig 19 }
+
+
+ smashTelnetEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable SMASH CLP (System Management Architecture for
+ Server Hardware Command Line Protocol) over Telnet.
+ This option is not available on all systems."
+ ::= { tcpApplicationConfig 20 }
+
+
+ smashSshEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable SMASH CLP (System Management Architecture for
+ Server Hardware Command Line Protocol) over SSH. A valid SSH
+ server key must be installed before enabling secure SMASH.
+ This option is not available on all systems."
+ ::= { tcpApplicationConfig 21 }
+
+
+ tftpCreateEmptyFile OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This MIB object is no longer a requirement for TFTP and has been deprecated."
+ ::= { tcpApplicationConfig 22 }
+
+ ftpTimeout OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The amount of time before FTP times out. Default is 300 seconds.
+ Value of zero is no timeout. Max value is any positive 4 byte value."
+ ::= { tcpApplicationConfig 23 }
+
+ rdEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable Remote Disk.
+
+ NOTE: Change to Remote Disk will take effect after the
+ next restart of the MM."
+ ::= { tcpApplicationConfig 24 }
+
+ rdocEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable Remote Disk on Card.
+
+ NOTE: Change to Remote Disk on Card will take effect
+ after the next restart of the MM."
+ ::= { tcpApplicationConfig 25 }
+
+ kvmEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable KVM.
+
+ NOTE: Change to KVM will take effect after the next
+ restart of the MM."
+ ::= { tcpApplicationConfig 26 }
+
+ -- The SSH Server Configuration Group
+ mmSshServerConfig OBJECT IDENTIFIER ::= { tcpApplicationConfig 27 }
+
+ mmSshServerHostKeyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmSshServerHostKeyEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table that contains per public/private host key
+ pair information."
+ ::= { mmSshServerConfig 1 }
+
+ mmSshServerHostKeyEntry OBJECT-TYPE
+ SYNTAX MmSshServerHostKeyEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A list of information about a particular public/private
+ host key pair."
+ INDEX { mmSshServerHostKeyIndex }
+ ::= { mmSshServerHostKeyTable 1 }
+
+ MmSshServerHostKeyEntry ::= SEQUENCE {
+ mmSshServerHostKeyIndex INTEGER,
+ mmSshServerHostKeyType INTEGER,
+ mmSshServerHostKeySize INTEGER,
+ mmSshServerHostKeyFingerprint OCTET STRING
+ }
+
+ mmSshServerHostKeyIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index of the public/private host key pair."
+ ::= { mmSshServerHostKeyEntry 1 }
+
+ mmSshServerHostKeyType OBJECT-TYPE
+ SYNTAX INTEGER {
+ sshDss (1),
+ sshRsa (2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The type of the public/private host key pair."
+ ::= { mmSshServerHostKeyEntry 2 }
+
+ mmSshServerHostKeySize OBJECT-TYPE
+ SYNTAX INTEGER {
+ bits512 (1),
+ bits768 (2),
+ bits1024 (3),
+ bits2048 (4),
+ bits4096 (5)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The size of the public/private host key pair.
+
+ NOTE: The AMM supports only the bits2048 value."
+ ::= { mmSshServerHostKeyEntry 3 }
+
+ mmSshServerHostKeyFingerprint OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The RSA fingerprint of the public part of the host key
+ pair. This value can be used with the SSH client to
+ verify, on the initial connection, that the Secure Shell
+ server responding to the request is the server running
+ on the AMM. "
+ ::= { mmSshServerHostKeyEntry 4 }
+
+ mmSshServerHostKeyGenerate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiate the new Host Keys generation process for the
+ AMM SSH Server.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { mmSshServerConfig 2 }
+
+ mmSshServerHostKeyGenerateProgress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicate the progress of the key generation process."
+ ::= { mmSshServerConfig 3 }
+
+ rpEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable Remote Presence."
+ ::= { tcpApplicationConfig 28 }
+
+ -- TCP Port Assignment
+ tcpPortAssignmentCfg OBJECT IDENTIFIER ::= { tcpProtocols 5 }
+
+ tcpPortsRestoreDefault OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all ports to default value.
+ http: 80
+ https: 443
+ telnet: 23
+ ssh: 22
+ SNMP agent: 161
+ SNMP trap: 162
+ TCP Command Mode: 6090
+ Secure TCP Command Mode: 6091
+ Remote Disk: 1044
+ Remote Disk-on-Card: 1045
+ Remote KVM: 3900
+ FTP: 21
+ FTP Data: 20
+ TFTP: 69
+ SMASH telnet: 50023
+ SMASH ssh: 50022
+ SLP: 427
+ Storage Description Service: 1046
+
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { tcpPortAssignmentCfg 1 }
+
+ httpPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "HTTP port number. Default value is 80. Once changed, the URL's have to
+ include :port at the end."
+ ::= { tcpPortAssignmentCfg 2 }
+
+ httpsPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SSL port number. Default value is 443. Once changed, the URL's have to
+ include :port at the end."
+ ::= { tcpPortAssignmentCfg 3 }
+
+ telnetPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Telnet port number. Default value is 23. Port change will take effect immediately."
+ ::= { tcpPortAssignmentCfg 4 }
+
+ sshPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SSH port number. Default value is 22."
+ ::= { tcpPortAssignmentCfg 5 }
+
+ snmpAgentPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Agent port number. Default value is 161.
+ Changes take effect after several seconds."
+ ::= { tcpPortAssignmentCfg 6 }
+
+ snmpTrapsPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "SNMP Traps port number. Default value is 162.
+ Changes take effect after several seconds."
+ ::= { tcpPortAssignmentCfg 7 }
+
+ commandModePortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TCP Command Mode port number. Default value is 6090. Change will take effect immediately."
+ ::= { tcpPortAssignmentCfg 8 }
+
+ secureCommandModePortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Secure TCP Command Mode port number. Default value is 6091. Change will take effect immediately."
+ ::= { tcpPortAssignmentCfg 9 }
+
+ rdPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Remote Disk port number. Default value is 1044. MM has to be reset for change
+ to take effect.
+ NOTE: This mib object is deprecated and has been replaced by the rpPortAssignment object.
+ Attempts to set the port value for this SNMP object are no longer supported and any
+ read of the value associated with this object will return the rpPortAssignment
+ (Remote Presence) port information."
+ ::= { tcpPortAssignmentCfg 10 }
+
+ rdocPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Remote Disk-on-Card port number. Default value is 1045. MM has to be reset for
+ change to take effect.
+ NOTE: This mib object is deprecated and has been replaced by the rpPortAssignment object.
+ Attempts to set the port value for this SNMP object are no longer supported and any
+ read of the value associated with this object will return the rpPortAssignment
+ (Remote Presence) port information."
+ ::= { tcpPortAssignmentCfg 11 }
+
+ kvmPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Remote KVM port number. Default value is 3900. MM has to be reset for
+ change to take effect.
+ NOTE: This mib object is deprecated and has been replaced by the rpPortAssignment object.
+ Attempts to set the port value for this SNMP object are no longer supported and any
+ read of the value associated with this object will return the rpPortAssignment
+ (Remote Presence) port information."
+ ::= { tcpPortAssignmentCfg 12 }
+
+ ftpPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "FTP port number. Default value is 21. Port change will take effect immediately."
+ ::= { tcpPortAssignmentCfg 13 }
+
+ ftpDataPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "FTP Data port number. Default value is 20. Port change will take effect immediately."
+ ::= { tcpPortAssignmentCfg 14 }
+
+ tftpPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "TFTP port number. Default value is 69."
+ ::= { tcpPortAssignmentCfg 15 }
+
+ smashTelnetPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port number for SMASH CLP (System Management Architecture for Server
+ Hardware Command Line Protocol) over telnet. Default value is 50023.
+ Change will take effect immediately.
+ This option is not available on all systems."
+ ::= { tcpPortAssignmentCfg 17 }
+
+ smashSshPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port number for SMASH CLP (System Management Architecture for Server
+ Hardware Command Line Protocol) over SSH. Default value is 50022.
+ This option is not available on all systems."
+ ::= { tcpPortAssignmentCfg 18 }
+
+ slpPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Service Location Protocol port number. Default value is 427.
+ NOTE: This value is normally required to be 427 to interoperate properly
+ with other SLP enabled applications."
+ ::= { tcpPortAssignmentCfg 19 }
+
+ sdsPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Storage description service port number. Default value is 1046. MM has to be reset for
+ change to take effect.
+ NOTE: This mib object is deprecated and has been replaced by the rpPortAssignment object.
+ Attempts to set the port value for this SNMP object are no longer supported and any
+ read of the value associated with this object will return the rpPortAssignment
+ (Remote Presence) port information."
+ ::= { tcpPortAssignmentCfg 20 }
+
+ rpPortAssignment OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remote Presence port. Default value is 3900. This port cannot be disabled since it is
+ the single service entry point for all the services provided by AMM RPServ to clients."
+ ::= { tcpPortAssignmentCfg 21 }
+
+
+ -- LDAP Client Configuration
+ ldapClientCfg OBJECT IDENTIFIER ::= { tcpProtocols 6 }
+
+ ldapServer1NameOrIPAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 255 byte string that contains the
+ LDAP server host name or IP address (a.b.c.d)."
+ ::= { ldapClientCfg 1 }
+
+ ldapServer1PortNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "LDAP server port number."
+ ::= { ldapClientCfg 2 }
+
+ ldapServer2NameOrIPAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 255 byte string that contains the
+ LDAP server host name or IP address (a.b.c.d)."
+ ::= { ldapClientCfg 3 }
+
+ ldapServer2PortNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "LDAP server port number."
+ ::= { ldapClientCfg 4 }
+
+ ldapServer3NameOrIPAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 255 byte string that contains the
+ LDAP server host name or IP address (a.b.c.d)."
+ ::= { ldapClientCfg 5 }
+
+ ldapServer3PortNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "LDAP server port number."
+ ::= { ldapClientCfg 6 }
+
+ ldapRootDN OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 255 byte string that contains the
+ distinguished Name for root entry of directory tree.
+ An example might look like dn=foobar,dn=com."
+ ::= { ldapClientCfg 7 }
+
+ ldapUserSearchBaseDN OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..255))
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "As part of the user authentication process, it is necessary to search
+ the LDAP server for one or more attributes associated with a particular
+ user. Any search request must specify the base DN for the actual search.
+ This field specifies the base DN which should be used to search the User
+ directory. This is a NULL terminated 255 byte string.
+ An example might look like cn=users,dn=foobar,dn=com. If this
+ field is left blank, the Root DN will be used as the search base instead.
+ As mentioned, user searches are part of the authentication process. They
+ are carried out to retrieve information about the user such as login
+ permissions, callback number, and group memberships. For Version 2.0 LDAP
+ clients, it is strongly encouraged that this parameter be configured,
+ otherwise a search using the root DN may not succeed (as seen on Active
+ Directory servers).
+
+ NOTE: This MIB object is for MM only.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { ldapClientCfg 8 }
+
+ ldapGroupFilter OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..511))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This filter is used for group authentication. It specifies what group or
+ groups that this MM belongs to. If left blank, group authentication is
+ disabled. Otherwise, group authentication will be performed against the
+ filter. The filter can be a specific group name (e.g. RSAWest), a wildcard (*)
+ which matches everything, or a wildcard with a prefix (e.g. RSA*). The default
+ filter is RSA*.
+ After user authentication, group authentication will take place, whereby an
+ attempt will be made to match the group or groups (that the user belongs to)
+ to the group filter defined here. If there is no match, the user will not pass
+ authentication and will be blocked. If there is a match, the login permissions
+ for the user will be retrieved from the matched group(s), unless the user
+ already has login permissions assigned directly from the user record retrieved
+ from the LDAP server."
+ ::= { ldapClientCfg 9 }
+
+ ldapBindingMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ anonymousAuthentication(0),
+ clientAuthentication(1),
+ userPrincipalName(2),
+ strictUserPrincipalName(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "On initial binds to the LDAP server during user authentication, there are
+ three options:
+ Anonymous authentication: Bind attempt is made without a client DN or password.
+ If the bind is successful, a search will be requested in order to find an entry
+ on the LDAP server for the user attempting to login. If an entry is found, a
+ second attempt to bind will be attempted, this time with the user's DN and
+ password. If this succeeds, the user is deemed to have passed the user
+ authentication phase. Group authentication is then attempted if it is enabled.
+ Client authentication: Bind attempt is made with client DN and password
+ specified by this configuration parameter. If the bind is successful, we
+ proceed as above.
+ User Principal Name (UPN): Bind attempt is made directly with the credentials
+ used during the login process. If this succeeds, the user is deemed to have
+ passed the user authentication phase. Note that for Active Directory servers,
+ the userid can have the form someuser@somedomain or simply someuser.
+ Strict UPN: This is the same as UPN above, except that the userid must have
+ the form someuser@somedomain. The string entered by the user will be parsed
+ for the @ symbol.
+
+ NOTE: strictUserPrincipalName(3) option is available on MM only."
+ ::= { ldapClientCfg 10 }
+
+ ldapClientAuthenticationDN OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..255))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The initial bind to the LDAP server during user authentication can be
+ performed with anonymous authentication, client based authentication, or UPN.
+ The client based option requires a client DN and password as parameters to
+ the bind request. The client DN is a NULL terminated 255 byte string.
+ These parameters are configured here. Note that the password
+ can be left blank."
+ ::= { ldapClientCfg 11 }
+
+ ldapClientAuthenticationPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The client authentication password"
+ ::= { ldapClientCfg 12 }
+
+ ldapUIDsearchAttribute OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When the binding method selected is Anonymous authentication or Client
+ authentication, the initial bind to the LDAP server is followed by a search
+ request aimed at retrieving specific information about the user, including the
+ user's DN, login permissions, and group ownerships. In order to retrieve this
+ information, the search request must specify the attribute name used to
+ represent userids on that server. Specifically, this name is used as a search
+ filter against the login id entered by the user. This attribute name is
+ configured here. If this field is left blank, a default of uid is used during
+ user authentication.
+ For example, on Active Directory servers, the attribute name used for userids
+ is often sAMAccoutName.
+ When the binding method selected is UPN or Strict UPN, this field defaults
+ automatically to userPrincipalName during user authentication if the userid
+ entered has the form userid@somedomain."
+ ::= { ldapClientCfg 13 }
+
+ ldapGroupSearchAttribute OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When the MM Group Filter name is configured, it is necessary to retrieve
+ from the LDAP server the list of groups that a particular user belongs to.
+ This is required to do group authentication. In order to retrieve this list,
+ the search filter sent to the server must specify the attribute name associated
+ with groups. This field specifies this attribute name.
+ If this field is left blank, the attribute name in the filter will default
+ to memberOf."
+ ::= { ldapClientCfg 14 }
+
+ ldapLoginPermissionAttribute OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When a user successfully authenticates via a LDAP server, it is necessary
+ to retrieve the login permissions for this user. In order to retrieve these
+ permissions, the search filter sent to the server must specify the attribute
+ name associated with login permissions. This field specifies this attribute
+ name."
+ ::= { ldapClientCfg 15 }
+
+ ldapUseDNSOrPreConfiguredServers OBJECT-TYPE
+ SYNTAX INTEGER {
+ usePreConfiguredLDAPServers (0),
+ useDNSToFindLDAPServers (1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The MM contains a Version 2.0 LDAP Client that may be configured to provide
+ user authentication through one or more LDAP servers. The LDAP server(s) to be
+ used for authentication can be discovered dynamically or manually pre-configured.
+
+ If the usePreConfiguredLDAPServers option is selected, up to 4 LDAP servers can
+ be configured. Simply enter the server's IP address or hostname (assuming DNS
+ is enabled). The port number for each server is optional. If left blank,
+ the default value of 389 is used for non-secured LDAP connections. For secured
+ connections, the default is 636. At least one server must be configured.
+
+ If the useDNSToFindLDAPServers is selected, the domain name need to be provided.
+ For LDAP Authentication Only mode, additional information such as the forest name
+ also need to be provided."
+ ::= { ldapClientCfg 16 }
+
+ ldapDomainSource OBJECT-TYPE
+ SYNTAX INTEGER {
+ extractSearchDomainFromLoginID (0),
+ useOnlyConfiguredSearchDomainBelow (1),
+ tryLoginFirstThenConfiguredValue (2)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The DNS SRV request sent to the DNS server must specify a domain name.
+ The LDAP client will determine where to get this domain name based on one
+ of the following three options:
+
+ - extractSearchDomainFromLoginID: With this option, the LDAP client will
+ use the domain name in the login id. For example, if the login id is
+ joesmith@mycompany.com, the domain name equals mycompany.com. If the domain
+ name cannot be extracted, the DNS SRV will fail, causing the user
+ authentication to fail automatically.
+
+ - useOnlyConfiguredSearchDomainBelow: With this option, the LDAP client
+ will use the domain name configured in the Search Domain parameter.
+
+ - tryLoginFirstThenConfiguredValue: With this option, the LDAP client will
+ first attempt to extract the domain name from the login id. If this succeeds,
+ this domain name will be used in the DNS SRV request. If there is no domain
+ name present in the login id, the LDAP client will instead use the configured
+ Search Domain parameter as the domain name in the DNS SRV request.
+ If nothing is configured, user authentication will fail immediately."
+ ::= { ldapClientCfg 17 }
+
+ ldapSearchDomain OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "This parameter may be used as the domain name in the DNS SRV request,
+ depending on how the Domain Source parameter is configured."
+ ::= { ldapClientCfg 18 }
+
+ ldapServiceName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The DNS SRV request sent to the DNS server must also specify a service name.
+ The configured value will be used for this purpose. If left blank, the default
+ value used is 'ldap'. Note that the DNS SRV request must also specify a protocol
+ name. This defaults to 'tcp' and is not configurable."
+ ::= { ldapClientCfg 19 }
+
+ ldapRBSModelCfg OBJECT-TYPE
+ SYNTAX INTEGER {
+ oldPermissionString(0),
+ newRBSModel(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "There are two mechanisms to authenticate and authorize users on the AMM when
+ using an LDAP-enabled server. The first mechanism (oldPermissionString), also
+ known as version 1, uses bitstrings to associate permissions to users and groups.
+ Version1 supports Active Directory, Novell eDirectory, and OPenLDAP based
+ servers. The second mechanism (newRBSModel), also known as version 2,
+ uses a new Role-Based-Security (RBS) model. This mechanism is only available
+ for Active Directory servers, and requires the use of a snap-in that runs on any
+ windows platform. This snap-in tool allows you to configure roles on an Active
+ Directory server of your choice, and to associate users/groups and AMMs to those
+ roles. A role identifies the permissions given to users and groups associated with
+ that role, and also identifies the targets (e.g. AMM) to which this role is attached.
+ The use of bitstrings in version 2 disappears, making the configuration much more
+ manageable and user-friendly. Note that if you are not using Active Directory, then
+ you should not enable version 2. Also note that before enabling version 2, you should
+ already have your roles configured on your Active Directory server. The old version 1
+ bitstring model cannot be automatically converted to the new version 2 model. This is
+ why you must configure your users and groups before enabling version 2. Once
+ enabled, the change takes effect immediately. The default value for this field is
+ oldPermissionString."
+ ::= { ldapClientCfg 20 }
+
+
+ ldapTargetName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When administrator chooses Enhanced Role Based Security authentication model,
+ he can associate one AMM with one managed target object in Snap-in (one tool
+ to configure LDAP users permission) via one target name. The AMM target name can
+ be looked as alias of AMM, administrator can change it according to his
+ configuration requirements. This is a string of up to 63 characters (plus the
+ null character)"
+ ::= { ldapClientCfg 21 }
+
+ ldapAuthCfg OBJECT-TYPE
+ SYNTAX INTEGER {
+ authenticationAndAuthorization(0),
+ authenticationOnly(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If ldapAuthCfg is set to 0, LDAP server is used to authenticate and authorize
+ users. If it is set to 1, LDAP server is only used to authenticate users.
+
+ Note:LDAP Authentication Only mode is currently supported only in an Active
+ Directory environment."
+ ::= { ldapClientCfg 22 }
+
+ ldapForestName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "LDAP Forest Name.
+
+ Note: LDAP Forest Name is only for Active Directory environment."
+ ::= { ldapClientCfg 23 }
+
+ ldapDomainName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 255 byte string that contains the
+ LDAP Domain Name."
+ ::= { ldapClientCfg 24 }
+
+
+ ldapServer4NameOrIPAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A NULL terminated 255 byte string that contains the
+ LDAP server host name or IP address (a.b.c.d)."
+ ::= { ldapClientCfg 25 }
+
+ ldapServer4PortNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "LDAP server port number."
+ ::= { ldapClientCfg 26 }
+
+
+ -- ********************************************************************************
+ -- Uplink Check Configuration
+ -- ********************************************************************************
+
+ uplinkCheckConfig OBJECT IDENTIFIER ::= { tcpProtocols 7 }
+
+ uplinkCheckEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ uplinkCheckDisabled(0),
+ uplinkCheckEnabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable network uplink checking for physical detection.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { uplinkCheckConfig 1 }
+
+ uplinkCheckDelay OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay, in minutes (1-2880), between discovery of a failed network uplink and
+ the subsequent MM failover for physical detection.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { uplinkCheckConfig 2 }
+
+ logicalUplinkDestination OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination IP for MM to check its logical link.
+ Specify a non-zero IP Address in order to enable logical uplink checking.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { uplinkCheckConfig 3 }
+
+ logicalUplinkCheckEnabled OBJECT-TYPE
+ SYNTAX INTEGER {
+ uplinkCheckDisabled(0),
+ uplinkCheckEnabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable network uplink checking for logical detection.
+ logicalUplinkDestination must be set to a non-zero IP Address before enable
+ logical uplink checking.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { uplinkCheckConfig 4 }
+
+ logicalUplinkCheckDelay OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay, in minutes(1-2880), between discovery of a failed network uplink and
+ the subsequent MM failover for logical detection.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { uplinkCheckConfig 5 }
+
+
+ physicalUplinkCheckDelayInSecs OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay, in seconds(10-172800), between discovery of a failed network uplink and
+ the subsequent MM failover for physical detection.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { uplinkCheckConfig 6 }
+
+
+ logicalUplinkCheckDelayInSecs OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delay, in seconds(60-172800), between discovery of a failed network uplink and
+ the subsequent MM failover for logical detection.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { uplinkCheckConfig 7 }
+
+ logicalUplinkIPv6Destination OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Destination IP for MM to check its logical link using IPv6.
+ Specify a non-zero IP Address in order to enable logical uplink checking.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM.
+ NOTE: This MIB object is only applicable if IPv6 is enabled on the MM."
+ ::= { uplinkCheckConfig 8 }
+
+ logicalUplinkFailoverPolicy OBJECT-TYPE
+ SYNTAX INTEGER { either(1), both(2) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Determines when to failover if both an IPv4 and IPv6 destination
+ have been configured.
+
+ If set to 'either' the system will failover if either of the
+ destination's link check fails. If set to 'both' then the IPv4
+ and IPv6 link checks must fail before a failover will happen.
+
+ NOTE: This MIB object is only applicable to systems with a standby MM."
+ ::= { uplinkCheckConfig 9 }
+
+ -- ********************************************************************************
+ -- NTP Configuration
+ -- ********************************************************************************
+ ntpConfig OBJECT IDENTIFIER ::= { tcpProtocols 8 }
+
+ ntpEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable the NTP client. The client will update
+ the AMM system clock at the frequency specified."
+ ::= { ntpConfig 1 }
+
+ ntpIpAddressHostname OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "NTP server's IP address or hostname if DNS is enabled
+ and configured."
+ ::= { ntpConfig 2 }
+
+ ntpUpdateFrequency OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The frequency in minutes that the NTP service runs.
+ The value range is 0 to 45000. If the NTP update frequency
+ is set to 0, the AMM clock can only be synchronized with the
+ NTP server manually."
+ ::= { ntpConfig 3 }
+
+ ntpLastUpdate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The date and time that the NTP server last updated
+ the system clock."
+ ::= { ntpConfig 4 }
+
+ ntpUpdateClock OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Update the AMM system clock with the specified NTP server.
+ A valid NTP server must be configured first."
+ ::= { ntpConfig 5 }
+
+ ntpAuthEntry OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The NTP v3 authentication entry to be used for time sync
+ with a secure NTP server. The format of an authentication
+ entry is <key index> <key type> <key>. <key index> must
+ be an integer between 1 and 65535. <key type> must be
+ M. <key> is the actual value of the authentication
+ key as configured on the NTP server.
+ The GET command returns back data in the format:
+ <key index> <key type>
+ It does not return the actual key."
+ ::= { ntpConfig 6 }
+
+ ntpAuthEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables NTP v3 authentication"
+ ::= { ntpConfig 7 }
+
+ -- ********************************************************************************
+ -- SYSLOG Configuration
+ -- ********************************************************************************
+ syslogConfig OBJECT IDENTIFIER ::= { tcpProtocols 9 }
+
+ syslogSevFilterLevel OBJECT-TYPE
+ SYNTAX INTEGER {
+ error(0),
+ warning(1),
+ information(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "syslogSevFilterLevel error/warning/information ."
+ ::= { syslogConfig 1 }
+
+ -- ********************************************************************************
+ -- syslogCollector Configuration
+ -- ********************************************************************************
+ syslogCollectorConfig OBJECT IDENTIFIER ::= { syslogConfig 2 }
+
+ -- ********************************************************************************
+ -- Syslog Collector Configuration table
+ -- ********************************************************************************
+
+ syslogCollectorTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SyslogCollectorEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Syslog Collector entries"
+ ::= { syslogCollectorConfig 1 }
+
+ syslogCollectorEntry OBJECT-TYPE
+ SYNTAX SyslogCollectorEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Syslog Collector entries"
+ INDEX { syslogCollectorIndex }
+ ::= { syslogCollectorTable 1 }
+
+
+ SyslogCollectorEntry ::= SEQUENCE {
+ syslogCollectorIndex INTEGER,
+ syslogCollectorHostnameOrIpAddress OCTET STRING,
+ syslogCollectorPort INTEGER,
+ syslogCollectorEnable INTEGER
+ }
+
+ syslogCollectorIndex OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Index for Syslog Collector entry."
+ ::= { syslogCollectorEntry 1 }
+
+ syslogCollectorHostnameOrIpAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Syslog Collector IP address or host name."
+ ::= { syslogCollectorEntry 2 }
+
+ syslogCollectorPort OBJECT-TYPE
+ SYNTAX INTEGER(1..65535)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Syslog Collector port number."
+ ::= { syslogCollectorEntry 3 }
+
+ syslogCollectorEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Syslog Collector enable/disable."
+ ::= { syslogCollectorEntry 4 }
+
+ -- ********************************************************************************
+ -- Generate test syslog packet
+ -- ********************************************************************************
+ syslogTestPacket OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Generate a test syslog packet. This will send a test syslog to all configured
+ and enabled syslog collectors to assist in validating the configuration.
+
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object."
+ ::= { syslogConfig 3 }
+
+ -- ********************************************************************************
+ -- SOL (Serial Over LAN) Configuration
+ -- ********************************************************************************
+ solConfiguration OBJECT IDENTIFIER ::= { configureSP 10 }
+
+ -- ********************************************************************************
+ -- SOL Global Configuration
+ -- ********************************************************************************
+ solGlobalConfig OBJECT IDENTIFIER ::= { solConfiguration 1 }
+
+ solEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ solDisabled(0),
+ solEnabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable SOL dynamically."
+ ::= { solGlobalConfig 1 }
+
+ solVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the virtual LAN ID for the internal management network between the MM and
+ the Blade System Management Processors (BSMPs). The range of valid VLAN ID's
+ is 3 to 4095."
+ ::= { solGlobalConfig 2 }
+
+ solAccumulateTimeout OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value specifies how much time in millisecond SOL to buffer data before
+ sending the next SOL packet since the last SOL packet was transmitted.
+ Valid value from 5 ms to 1275 ms. The value is in 5 ms increment. Value
+ is not in 5 ms increment will be truncated to a nearest 5s. Default value
+ is 5 ms."
+ ::= { solGlobalConfig 3 }
+
+ solCharSendThreshold OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This value specifies how many characters SOL to buffer before
+ sending the next SOL packet since the last SOL packet was transmitted.
+ Valid value is from 1 to 255"
+ ::= { solGlobalConfig 4 }
+
+ solRetry OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Retry count. Valid value from 0-7. 0 means no retries after packet is transmitted.
+ Packet will be dropped if no ACK/NACK received by the time retries expired."
+ ::= { solGlobalConfig 5 }
+
+ solRetryInterval OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Retry Interval in 10 ms increment. Sets the time that the SOL will
+ wait before the first retry and the time between retries when sending SOL
+ packets to the remote blade. Value range is from 0 to 2550 ms in 10 ms
+ increment. 0 means retries will be sent back-to-back."
+ ::= { solGlobalConfig 6 }
+
+ solExitToCliKeySeq OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the keystroke sequence used to escape out of SOL session and back to CLI
+ console. This sequence must have at least one character. The caret symbol (^)
+ has a special meaning in this sequence. It denotes 'Ctrl' for keystrokes that
+ map to Ctrl sequences (for example, ^[ for the escape key and ^M for carriage
+ return). All occurrences of ^ will be interpreted as part of a Ctrl sequence.
+ Refer to an ASCII-to-key conversion table for a complete list of Ctrl sequences.
+ The default value for this field is '^[(' i.e. ESC followed by (."
+ ::= { solGlobalConfig 7 }
+
+ solResetBladeKeySeq OBJECT-TYPE
+ SYNTAX OCTET STRING(SIZE(0..16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the keystroke sequence used to reset the blade while in SOL session
+ console. This sequence must have at least one character. The caret symbol (^)
+ has a special meaning in this sequence. It denotes 'Ctrl' for keystrokes that
+ map to Ctrl sequences (for example, ^[ for the escape key and ^M for carriage
+ return). All occurrences of ^ will be interpreted as part of a Ctrl sequence.
+ Refer to an ASCII-to-key conversion table for a complete list of Ctrl sequences.
+ The default value for this field is '^[R^[r^[R' i.e. ESC R ESC r ESC R."
+ ::= { solGlobalConfig 8 }
+
+
+ -- Blade SOL config
+ solBladeConfig OBJECT IDENTIFIER ::= { solConfiguration 2 }
+
+
+ solBladeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SolBladeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "SOL Blade configuration table."
+ ::= { solBladeConfig 1 }
+
+ solBladeEntry OBJECT-TYPE
+ SYNTAX SolBladeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "SOL Blade table entry"
+ INDEX { solBladeIndex }
+ ::= { solBladeTable 1 }
+
+ SolBladeEntry ::= SEQUENCE {
+ solBladeIndex INTEGER,
+ solBladeName OCTET STRING,
+ solBladeEnable INTEGER,
+ solBladeIpAddr IpAddress,
+ solBladeSessionStatus INTEGER,
+ solBladeCapability INTEGER
+ }
+
+ solBladeIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "SOL Blade table index."
+ ::= { solBladeEntry 1 }
+
+ solBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { solBladeEntry 2 }
+
+ solBladeEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ solBladeDisabled(0),
+ solBladeEnabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable a SOL on a blade."
+ ::= { solBladeEntry 3 }
+
+ solBladeIpAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "IP address of the blade derived from the IP address range for the blade
+ system management processors on the blades.
+
+ NOTE: The IPv6 address for a blade can be view with the
+ bladeIPv6AddressTable."
+ ::= { solBladeEntry 4 }
+
+ solBladeSessionStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ solSessionNotReady(0),
+ solSessionReady(1),
+ solSessionActive(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of a blade SOL session:
+ solSessionNotReady: no SOL session connected to the blade.
+ solSessionReady: there is an SOL session to the blade.
+ solSessionActive: there is an SOL session to the blade and there is a
+ client using the SOL session."
+ ::= { solBladeEntry 5 }
+
+ solBladeCapability OBJECT-TYPE
+ SYNTAX INTEGER {
+ notSupport(0),
+ support(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Display whether or not the blade support SOL feature."
+ ::= { solBladeEntry 6 }
+
+ -- ********************************************************************************
+ -- Chassis Internal Network (CIN)
+ -- ********************************************************************************
+ chassisInternalNetwork OBJECT IDENTIFIER ::= { configureSP 11}
+
+ -- Maximum number of CIN definitions supported
+ cinsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of Chassis Internal Network (CIN) definitions supported.
+ Currently a maximum of 14 CIN definitions can be supported."
+ ::= { chassisInternalNetwork 1 }
+
+ -- CIN Global Configuration
+ cinGlobalEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ cinDisabled(0),
+ cinEnabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable Chassis Internal Network (CIN) function dynamically.
+ Enabled:
+ AMM reads the CIN entries. For each enabled entry,
+ - If the CIN VLAN ID is new and does not have a CIN interface
+ created yet then create a new CIN interface based on that
+ CIN VLAN ID. Use the CIN IP address from the entry to create
+ a host route.
+ - If the CIN IP address is 0.0.0.0 then start ARP monitoring.
+
+ Disabled:
+ - Stop all ARP monitoring.
+ - Delete all host routes.
+ - Delete all CIN interfaces."
+ ::= { chassisInternalNetwork 2 }
+
+ -- CIN Configuration Table
+ cinTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CinEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Internal Network (CIN) configuration table."
+ ::= { chassisInternalNetwork 3}
+
+ cinEntry OBJECT-TYPE
+ SYNTAX CinEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Internal Network (CIN) table entry."
+ INDEX { cinIndex }
+ ::= { cinTable 1 }
+
+ CinEntry ::= SEQUENCE {
+ cinIndex INTEGER,
+ cinDefExists INTEGER,
+ cinDelete INTEGER,
+ cinEnable INTEGER,
+ cinId INTEGER,
+ cinIpAddress IpAddress,
+ cinIpv6Address InetAddressIPv6
+ }
+
+ cinIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Internal Network (CIN) table index."
+ ::= { cinEntry 1 }
+
+ cinDefExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if a Chassis Internal Network (CIN) definition exists for
+ this index or not."
+ ::= { cinEntry 2 }
+
+ cinDelete OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Delete Chassis Internal Network (CIN) definition.
+ Works like CIN entry disabled. However, the entry is also deleted.
+
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object. Deleting a non-defined entry does nothing."
+ ::= { cinEntry 3 }
+
+ cinEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable or enable a Chassis Internal Network (CIN) definition.
+ Enabled:
+ AMM reads the entry and creates a new CIN interface if the CIN VLAN
+ ID is new and does not have a CIN interface created yet, adds host
+ route, and monitors communication path. Start ARP monitoring if
+ IP is 0.0.0.0.
+
+ Disabled:
+ Delete host route. If this is the last IP address that uses the CIN
+ interface,
+ - Stop ARP monitoring if IP is 0.0.0.0.
+ - Delete the CIN interface if there is no other entry depends on it."
+ ::= { cinEntry 4 }
+
+ cinId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the Chassis Internal Network (CIN) Virtual LAN (VLAN) ID for
+ the internal management network between the Management Module,
+ I/O Module, and the blade OS. The range of valid CIN VLAN IDs is
+ 3 to 4094 (inclusive). This value cannot be the same as the
+ Serial Over LAN (SOL) or Concurrent KVM (cKVM) VLAN ID.
+
+ NOTE: If creating a new CIN definition, you must define cinId
+ before you define cinIpAddress.
+
+ NOTE: Before changing this value on an existing CIN definition,
+ you must first disable the definition."
+ ::= { cinEntry 5 }
+
+ cinIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Internal Network (CIN) IP address.
+
+ Restrictions:
+ - CIN entries cannot have matching IP addresses, with the exception of 0.0.0.0.
+ - Multiple IP addresses of 0.0.0.0 with different VLAN IDs are allowed.
+ - The IP address cannot be multi-cast.
+ - The IP address cannot match the AMM IP address.
+ - If the CIN IP address is 0.0.0.0, the blade IP address for CIN which is configured
+ in the blade's OS can not be in the same subnet as that of AMM.
+
+ NOTE: If creating a new CIN definition, you must define cinId
+ before you define cinIpAddress.
+
+ NOTE: Before changing this value on an existing CIN definition,
+ you must first disable the definition.
+ NOTE: When ipv6 is enable on one interface, this column will
+ display all zero IPv4 address"
+ ::= { cinEntry 6}
+ cinIpv6Address OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Internal Network (CIN) IPv6 address
+
+ NOTE: When ipv4 is enable on one interface,this column will display
+ all zero IPv6 address.
+ "
+ ::= { cinEntry 7}
+
+ -- CIN Status Table
+
+ cinStatus OBJECT IDENTIFIER ::= { chassisInternalNetwork 4 }
+
+ cinStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CinStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Chassis Internal Network (CIN) status entry information."
+ ::= { cinStatus 1 }
+
+ cinStatusEntry OBJECT-TYPE
+ SYNTAX CinStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Internal Network (CIN) status table entry."
+ INDEX { cinStatusIndex }
+ ::= { cinStatusTable 1 }
+
+ CinStatusEntry ::= SEQUENCE {
+ cinStatusIndex INTEGER,
+ cinStatusString OCTET STRING
+ }
+
+ cinStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Chassis Internal Network (CIN) status log index number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { cinStatusEntry 1 }
+
+ cinStatusString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Status of a Chassis Internal Network (CIN) connection. For example:
+
+ Index:1 VLANID:4094 IPADDR:192.168.70.100 MAC:01:0A:0B:00:01:01 Type:Learned Status:Operational
+
+ Index is the status entry number in the status table. Followed by the
+ VLAN ID, IP address, and MAC address that the Management Module is
+ communicating with on the CIN connection.
+
+ Type is either 'Configured' or 'Learned'. Learned implies that the
+ Management Module dynamically discovered the IP address.
+ Configured means that the address was explicitly configured in
+ the Management Module.
+
+ Status can be 'Operational', 'Not Operational', or 'Disabled'.
+
+ 'Operational' means the Management Module can ping the CIN IP address.
+
+ 'Not Operational' means that the Management Module cannot ping the CIN
+ IP address. Verify that the blade and I/O Module are configured properly
+ and that their configurations are compatible with the Management Module.
+ The blade OS also needs to have an IP host route defined
+ (e.g. route add -host 192.168.70.100 eth0.4094).
+ I/O Modules need to have a VLAN defined containing the blade's and the
+ AMM's port. Blade and I/O Modules need to be powered up and operational.
+
+ 'Disabled' means that the CIN configuration has been disabled by a
+ Management Module administrator.
+
+ For consistent results, view as a table and not as individual entries."
+ ::= { cinStatusEntry 2 }
+
+ -- CIN Port Configuration Table
+
+ cinPortConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CinPortConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Internal Network (CIN) configuration table for viewing
+ and configuring the protocol port information for a particular CIN entry."
+ ::= { chassisInternalNetwork 5}
+
+ cinPortConfigEntry OBJECT-TYPE
+ SYNTAX CinPortConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Internal Network (CIN) entry for viewing and configuring
+ the protocol port information for a particular CIN entry."
+ INDEX { cinPortConfigCINIndex, cinPortConfigIndex }
+ ::= { cinPortConfigTable 1 }
+
+ CinPortConfigEntry ::= SEQUENCE {
+ cinPortConfigCINIndex INTEGER,
+ cinPortConfigIndex INTEGER,
+ cinPortConfigProtocolID INTEGER,
+ cinPortConfigExternalPort INTEGER,
+ cinPortConfigInternalPort INTEGER,
+ cinPortConfigEnable INTEGER,
+ cinPortConfigDirection INTEGER
+ }
+
+ cinPortConfigCINIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The identifier for the particular CIN configuration that
+ these protocol port definitions are associated with. This object
+ is the same as the cinIndex value in the cinTable."
+ ::= { cinPortConfigEntry 1 }
+
+ cinPortConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The identifier of a particular CIN protocol port configuration
+ for a given CIN configuration as specified by cinPortConfigCINIndex.
+ There can be up to 16 unique protocol port definitions per CIN
+ configuration."
+ ::= { cinPortConfigEntry 2 }
+
+ cinPortConfigProtocolID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(1),
+ udp(2),
+ notDefined(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the port protocol definition is for a TCP or UDP port.
+ If the value of notDefined(3) is returned, the entry has yet to be configured."
+ ::= { cinPortConfigEntry 3 }
+
+ cinPortConfigExternalPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The external port number specified for this port protocol
+ definition, ranging from 1 to 65,534."
+ ::= { cinPortConfigEntry 4 }
+
+ cinPortConfigInternalPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The internal port number specified for this port protocol
+ definition, ranging from 1 to 65,534."
+ ::= { cinPortConfigEntry 5 }
+
+ cinPortConfigEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The status of this port protocol definition."
+ ::= { cinPortConfigEntry 6 }
+
+ cinPortConfigDirection OBJECT-TYPE
+ SYNTAX INTEGER {
+ incoming(1),
+ outgoing(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The traffic direction specified for this port protocol definition."
+ ::= { cinPortConfigEntry 7 }
+
+ -- ********************************************************************************
+ -- SNMP (Ers) Configuration
+ -- ********************************************************************************
+ configurationManagement OBJECT IDENTIFIER ::= { configureSP 15 }
+ saveConfigurationToChassis OBJECT-TYPE
+ SYNTAX INTEGER {
+ compressedFormat(1),
+ legacyFormat(2) -- deprecated
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Save the configuration settings from the AMM to the chassis.
+ This operation may take several seconds.
+ The input values for the SET command when AMM is installed in BladeCenter and
+ BladeCenter T are:
+ 1: Save the configuration settings in compressed(AMM) format.
+ 2: Save the configuration settings in legacy(MM) format. This option has
+ been deprecated.
+ other: Invalid.
+
+ The input values for the SET command when AMM is installed in BladeCenter H and
+ BladeCenter HT are:
+ 1: Save the configuration settings in compressed(AMM) format.
+ other: Invalid.
+
+ NOTE: This MIB object is for AMM only and the value returned for the GET command is meaningless."
+ ::= { configurationManagement 1 }
+
+ restoreConfigurationFromChassis OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restore the configuration settings to the AMM from the BladeCenter chassis.
+ NOTE: This MIB object is for AMM only and the value returned for the GET command is meaningless."
+ ::= { configurationManagement 2 }
+
+
+ autoReadConfigInNewChassis OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The AMM will automatically read configuration settings
+ from the midplane every time the AMM is inserted into a
+ new chassis.
+ NOTE: This MIB object is for AMM only."
+ ::= { configurationManagement 3 }
+
+
+ -- ************************************************************************
+ -- BladeCenter T System Management
+ -- ************************************************************************
+
+ -- ************************************************************************
+
+ telcoAlarmReq OBJECT IDENTIFIER ::= { telcoManagement 1 }
+
+
+ -- ************************************************************************
+ -- BladeCenter T Set A Software Alarm
+ -- ************************************************************************
+ telcoAlarmSet OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Create a software alarm. An input octet string consists of the
+ alarm severity level and the alarm description (40 bytes max).
+ The following severity levels are valid :
+ CRT Critical
+ MJR Major
+ MNR Minor
+
+ NOTE 1: The level (e.g. MJR) and alarm description string must
+ be separated by a blank, otherwise, a badValue error will be returned.
+
+ NOTE 2: Value returned for the GET command is meaningless for
+ this MIB object.
+
+ NOTE 3: This MIB object is for BladeCenter T only."
+ ::= { telcoAlarmReq 1 }
+
+
+ -- ************************************************************************
+ -- BladeCenter T Ack an Alarm
+ -- ************************************************************************
+ telcoAlarmAck OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Acknowledge an alarm. An input octet string consists of the
+ alarm key ID expressed as 'mmm:ggg:iii:aaa:sss' where:
+ m : Module ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ g : Gen ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ i : GenInfo ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ a : Alarm ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ s : Alarm severity value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+
+
+ NOTE 1: Value returned for the GET command is meaningless for
+ this MIB object.
+
+ NOTE 2: This MIB object is for BladeCenter T only."
+ ::= { telcoAlarmReq 2 }
+
+
+ -- ************************************************************************
+ -- BladeCenter T Clear an Alarm
+ -- ************************************************************************
+ telcoAlarmClear OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Clear an active alarm. An input octet string consists of the
+ alarm key ID expressed as 'mmm:ggg:iii:aaa:sss' where:
+ m : Module ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ g : Gen ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ i : GenInfo ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ a : Alarm ID value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+ s : Alarm severity value of decimal digits(1-255) or
+ blank space(s) for leading zero(s)
+
+
+ NOTE1 : Value returned for the GET command is meaningless for
+ this MIB object.
+
+ NOTE 2: This MIB object is for BladeCenter T only."
+ ::= { telcoAlarmReq 3 }
+
+
+
+ -- ************************************************************************
+ -- ************************************************************************
+ -- BladeCenter HT Hardware Operation Management
+ -- ************************************************************************
+
+ telcoHWManagement OBJECT IDENTIFIER ::= { telcoManagement 3 }
+
+ -- ********************************************************************************
+ -- Telco Alarm Panel Power ON/OFF operation
+ -- ********************************************************************************
+
+ tappowerReq OBJECT IDENTIFIER ::= { telcoHWManagement 1 }
+
+ tappoweronoff OBJECT-TYPE
+ SYNTAX INTEGER {
+ poweroff(0),
+ poweron(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Telco Alarm Panel power on or power off. If powering off a currently
+ powered on Telco Alarm Panel, then all LEDs of this request card will
+ be reset to OFF and the Safely Remove LED will be turned ON to indicate
+ the card is safe for removal.
+ NOTE: This MIB object is for BladeCenter HT only.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { tappowerReq 1}
+
+
+ -- ********************************************************************************
+ -- Network Clock Power ON/OFF operation
+ -- ********************************************************************************
+
+ ncReq OBJECT IDENTIFIER ::= { telcoHWManagement 2 }
+
+
+ -- ********************************************************************************
+ -- Network Clock Cards
+ -- ****************************************************************************
+
+ ncReqTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF NcReqEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Table of the Network Clock Module Operations.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncReq 1 }
+
+ ncReqEntry OBJECT-TYPE
+ SYNTAX NcReqEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock Module Power ON/OFF entry.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ INDEX { ncReqIndex }
+ ::= { ncReqTable 1 }
+
+ NcReqEntry ::= SEQUENCE {
+ ncReqIndex INTEGER,
+ ncReqBayNumber INTEGER,
+ ncReqPoweronoff INTEGER
+ }
+
+
+ ncReqIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..128)
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock Module Request index.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncReqEntry 1 }
+
+ ncReqBayNumber OBJECT-TYPE
+ SYNTAX INTEGER {
+ networkclock1(1),
+ networkclock2(2)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Network Clock Module Request Bay number.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BladeCenter HT only."
+ ::= { ncReqEntry 2 }
+
+ ncReqPoweronoff OBJECT-TYPE
+ SYNTAX INTEGER {
+ poweroff(0),
+ poweron(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Request to power on/off for the specified Network Clock Module.
+ For consistent results, view as a table and not as individual entries.
+ NOTE: This MIB object is for BladeCenter HT only.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { ncReqEntry 3 }
+
+
+
+ -- ************************************************************************
+ -- BladeCenter T OEM grouping
+ -- ************************************************************************
+
+ telcoOEM OBJECT IDENTIFIER ::= { telcoManagement 127 }
+
+ telcoOEMs OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A bitmap of information about the contents of this subtree. The
+ bitmap is a variable length string containing a list of 1's and 0's.
+ Every bit that is set to 1 has a corresponding subtree entry that
+ is supported in firmware, while a 0 means that the subtree entry
+ is unavailable.
+
+ NOTE: This MIB object is for BladeCenter T only."
+ ::= { telcoOEM 1 }
+
+
+ -- ********************************************************************************
+ -- Restart Control
+ -- ********************************************************************************
+
+ restartSPImmediately OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restart the MM immediately.
+
+ NOTE: Value returned for the GET command is meaningless for
+ this MIB object."
+ ::= { restartReset 4 }
+
+ restartStandbyMM OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restarts the Standby MM from the Primary MM.
+
+ NOTE: Value returned for the GET command is meaningless for
+ this MIB object.
+
+ NOTE: This mib object is only applicable to systems with a standby MM."
+ ::= { restartReset 5}
+
+ switchOverRedundantMM OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Switch over to the redundant Management Module.
+ The failover will not occur if the standby or primary MM is in flashing mode.
+
+ NOTE: Value returned for the GET command is meaningless for
+ this MIB object.
+
+ NOTE: This mib object is only applicable to systems with a redundant MM."
+ ::= { restartReset 7 }
+
+ resetSPConfigAndRestart OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Will cause all the MM information to be reset to it's
+ initial factory defaults (all previous configuration
+ information is lost) and the MM will be re-started.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { restartReset 20 }
+
+ resetSPConfigAndRestartSaveLogs OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Will cause all the MM information to be reset to it's
+ initial factory defaults (all previous configuration
+ information is lost) and the MM will be re-started. The
+ logs will be saved.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { restartReset 21 }
+
+ -- ********************************************************************************
+ -- processorBlade
+ -- ********************************************************************************
+ --This group of objects provides information specific to blades
+ processorBlade OBJECT IDENTIFIER ::= { blades 1 }
+
+ -- ********************************************************************************
+ -- Media and I/O
+ -- ********************************************************************************
+ bladeMediaTrayBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ managementModule(0),
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Allocate the media tray to a blade of a BladeCenter system.
+ On a get command, a blade ID of 0x00 means that no blade is
+ currently using the device. A set command cannot allocate
+ the media tray to the management module.
+
+ NOTE: A blade cannot be allocated to the media tray if the
+ value of OID remoteMediaTraySwitchEnable of the blade is disabled."
+ ::= { processorBlade 1 }
+
+ bladeKVMBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ managementModule(0),
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Allocate the keyboard, video, and mouse ports (KVM) to a blade
+ of a blade runner system. On a get command, a blade ID of 0x00
+ means that no blade is currently using the devices. A set
+ command cannot allocate the KVM to the management module."
+ ::= { processorBlade 2 }
+
+ -- ********************************************************************************
+ -- Blade boot sequence
+ -- ********************************************************************************
+ bladeBootSequenceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeBootSequenceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade boot sequence information. Contains
+ the boot sequence information for each blade."
+ ::= { processorBlade 3 }
+
+ bladeBootSequenceEntry OBJECT-TYPE
+ SYNTAX BladeBootSequenceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Boot sequence entry"
+ INDEX { bootSequenceIndex }
+ ::= { bladeBootSequenceTable 1 }
+
+
+ BladeBootSequenceEntry ::= SEQUENCE {
+ bootSequenceIndex INTEGER,
+ bootSequenceBladeId INTEGER,
+ bootSequenceBladeExists INTEGER,
+ bootSequenceBladePowerState INTEGER,
+ bootSequenceBladeHealthState INTEGER,
+ bootSequenceBladeName OCTET STRING,
+ bootSequence1 INTEGER,
+ bootSequence2 INTEGER,
+ bootSequence3 INTEGER,
+ bootSequence4 INTEGER
+ }
+
+ bootSequenceIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade boot sequence index."
+ ::= { bladeBootSequenceEntry 1 }
+
+ bootSequenceBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeBootSequenceEntry 2 }
+
+ bootSequenceBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeBootSequenceEntry 3 }
+
+ bootSequenceBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeBootSequenceEntry 4 }
+
+ bootSequenceBladeHealthState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ critical(3),
+ kernelMode(4),
+ discovering(5),
+ commError(6),
+ noPower(7),
+ flashing(8),
+ initFailure(9),
+ insufficientPower(10),
+ powerDenied(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The system health state for the blade.
+
+ Unknown: Blade is in an undefined state.
+ Good: Blade is operating normally.
+ Warning: One or more outstanding warnings exist for this blade.
+ Critical: One or more outstanding critical events for this blade.
+ Kernel Mode: Blade is in kernel mode.
+ Discovering: The AMM is currently in the process of discovering this blade.
+ Communications Error: The AMM failed to communicate with this blade.
+ No Power: No power to the blade's domain.
+ Flashing: Flashing in progress.
+ Initialization Failure: Blade failed to initialized.
+ Insufficient Power: Not enough power is left in the blade's domain to power the blade.
+ Power Denied: Power was denied to the blade."
+ ::= { bladeBootSequenceEntry 5 }
+
+ bootSequenceBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeBootSequenceEntry 6 }
+
+ bootSequence1 OBJECT-TYPE
+ SYNTAX INTEGER {
+ noneSpecified(0),
+ floppy(1),
+ cdrom(2),
+ hardDrive0(3),
+ hardDrive1(4),
+ hardDrive2(5),
+ hardDrive3(6),
+ networkBoot(7),
+ iscsi(8),
+ iscsiCritical(9),
+ hardDrive4(10),
+ usbModularFlashDrive(11),
+ hypervisor(12),
+ uefi(13),
+ legacyonly(14),
+ notAvailable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The boot device for this blade boot sequence. Note that some types
+ of blades don't support floppy disk drive. It is recommended that all
+ boot sequence 1,2 3, and 4 be configured starting from boot sequence 1.
+ If there is any duplication of the configured boot sequence and the
+ current configuration, the two boot sequence will be swapped.
+ For an example: the current boot sequence is
+ 1=HD0, 2=CD, 3=FD, 4=HD1
+ If the user wants to configure 1=FD which is a duplication of 3 then the
+ new boot sequence will be:
+ 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped)
+ Not all hard drives are available on all blade configurations.
+ The 'Iscsi critical' option has a special meaning: the blade tries to
+ find an iscsi boot device and if it does not it keeps trying forever."
+ ::= { bladeBootSequenceEntry 7 }
+
+ bootSequence2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ noneSpecified(0),
+ floppy(1),
+ cdrom(2),
+ hardDrive0(3),
+ hardDrive1(4),
+ hardDrive2(5),
+ hardDrive3(6),
+ networkBoot(7),
+ iscsi(8),
+ iscsiCritical(9),
+ hardDrive4(10),
+ usbModularFlashDrive(11),
+ hypervisor(12),
+ uefi(13),
+ legacyonly(14),
+ notAvailable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The boot device for this blade boot sequence. Note that some types
+ of blades don't support floppy disk drive. It is recommended that all
+ boot sequence 1,2 3, and 4 be configured starting from boot sequence 1.
+ If there is any duplication of the configured boot sequence and the
+ current configuration, the two boot sequence will be swapped.
+ For an example: the current boot sequence is
+ 1=HD0, 2=CD, 3=FD, 4=HD1
+ If the user wants to configure 1=FD which is a duplication of 3 then the
+ new boot sequence will be:
+ 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped)
+ Not all hard drives are available on all blade configurations.
+ The 'Iscsi critical' option has a special meaning: the blade tries to
+ find an iscsi boot device and if it does not it keeps trying forever."
+ ::= { bladeBootSequenceEntry 8 }
+
+ bootSequence3 OBJECT-TYPE
+ SYNTAX INTEGER {
+ noneSpecified(0),
+ floppy(1),
+ cdrom(2),
+ hardDrive0(3),
+ hardDrive1(4),
+ hardDrive2(5),
+ hardDrive3(6),
+ networkBoot(7),
+ iscsi(8),
+ iscsiCritical(9),
+ hardDrive4(10),
+ usbModularFlashDrive(11),
+ hypervisor(12),
+ uefi(13),
+ legacyonly(14),
+ notAvailable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The boot device for this blade boot sequence. Note that some types
+ of blades don't support floppy disk drive. It is recommended that all
+ boot sequence 1,2 3, and 4 be configured starting from boot sequence 1.
+ If there is any duplication of the configured boot sequence and the
+ current configuration, the two boot sequence will be swapped.
+ For an example: the current boot sequence is
+ 1=HD0, 2=CD, 3=FD, 4=HD1
+ If the user wants to configure 1=FD which is a duplication of 3 then the
+ new boot sequence will be:
+ 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped)
+ Not all hard drives are available on all blade configurations.
+ The 'Iscsi critical' option has a special meaning: the blade tries to
+ find an iscsi boot device and if it does not it keeps trying forever."
+ ::= { bladeBootSequenceEntry 9 }
+
+ bootSequence4 OBJECT-TYPE
+ SYNTAX INTEGER {
+ noneSpecified(0),
+ floppy(1),
+ cdrom(2),
+ hardDrive0(3),
+ hardDrive1(4),
+ hardDrive2(5),
+ hardDrive3(6),
+ networkBoot(7),
+ iscsi(8),
+ iscsiCritical(9),
+ hardDrive4(10),
+ usbModularFlashDrive(11),
+ hypervisor(12),
+ uefi(13),
+ legacyonly(14),
+ notAvailable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The boot device for this blade boot sequence. Note that some types
+ of blades don't support floppy disk drive. It is recommended that all
+ boot sequence 1,2 3, and 4 be configured starting from boot sequence 1.
+ If there is any duplication of the configured boot sequence and the
+ current configuration, the two boot sequence will be swapped.
+ For an example: the current boot sequence is
+ 1=HD0, 2=CD, 3=FD, 4=HD1
+ If the user wants to configure 1=FD which is a duplication of 3 then the
+ new boot sequence will be:
+ 1=FD, 2=CD, 3=HD0, 4=HD1 (1 and 3 swapped)
+ Not all hard drives are available on all blade configurations.
+ The 'Iscsi critical' option has a special meaning: the blade tries to
+ find an iscsi boot device and if it does not it keeps trying forever."
+ ::= { bladeBootSequenceEntry 10 }
+
+ -- ********************************************************************************
+ -- Blade local control
+ -- ********************************************************************************
+ bladeRemoteControl OBJECT IDENTIFIER ::= { processorBlade 4 }
+ -- remote blade control
+
+ bladeRemoteControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeRemoteControlEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade remote power control information.
+ Contains power on/off enablement status for each blade."
+ ::= { bladeRemoteControl 1 }
+
+ bladeRemoteControlEntry OBJECT-TYPE
+ SYNTAX BladeRemoteControlEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Remote power control entry"
+ INDEX { remoteControlIndex }
+ ::= { bladeRemoteControlTable 1 }
+
+
+ BladeRemoteControlEntry ::= SEQUENCE {
+ remoteControlIndex INTEGER,
+ remoteControlBladeId INTEGER,
+ remoteControlBladeExists INTEGER,
+ remoteControlBladePowerState INTEGER,
+ remoteControlBladeHealthState INTEGER,
+ remoteControlBladeName OCTET STRING,
+ remotePowerControlEnable INTEGER,
+ remoteMediaTrayControlEnable INTEGER,
+ remoteKVMControlEnable INTEGER,
+ remoteWakeOnLanControlEnable INTEGER,
+ remoteMediaTraySwitchEnable INTEGER
+ }
+
+ remoteControlIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade remote power control index."
+ ::= { bladeRemoteControlEntry 1 }
+
+
+ remoteControlBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeRemoteControlEntry 2 }
+
+ remoteControlBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeRemoteControlEntry 3 }
+
+ remoteControlBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power state for blade.
+ 0 = off, 1 = on, 3 = standby, 4 = hibernate, 255 = unknown."
+ ::= { bladeRemoteControlEntry 4 }
+
+ remoteControlBladeHealthState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ critical(3),
+ kernelMode(4),
+ discovering(5),
+ commError(6),
+ noPower(7),
+ flashing(8),
+ initFailure(9),
+ insufficientPower(10),
+ powerDenied(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The system health state for the blade.
+
+ Unknown: Blade is in an undefined state.
+ Good: Blade is operating normally.
+ Warning: One or more outstanding warnings exist for this blade.
+ Critical: One or more outstanding critical events for this blade.
+ Kernel Mode: Blade is in kernel mode.
+ Discovering: The AMM is currently in the process of discovering this blade.
+ Communications Error: The AMM failed to communicate with this blade.
+ No Power: No power to the blade's domain.
+ Flashing: Flashing in progress.
+ Initialization Failure: Blade failed to initialized.
+ Insufficient Power: Not enough power is left in the blade's domain to power the blade.
+ Power Denied: Power was denied to the blade."
+ ::= { bladeRemoteControlEntry 5 }
+
+ remoteControlBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeRemoteControlEntry 6 }
+
+ remotePowerControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade remote power control enablement status."
+ ::= { bladeRemoteControlEntry 7 }
+
+ remoteMediaTrayControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade media tray enablement status."
+ ::= { bladeRemoteControlEntry 8 }
+
+
+ remoteKVMControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade KVM enablement status. Note that some types of blades
+ don't support KVM"
+ ::= { bladeRemoteControlEntry 9 }
+
+ remoteWakeOnLanControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Wake On LAN enablement status.
+ If WOL is not supported by the blade, it displays 'notApplicable'
+ and WOL can not be enabled or disabled."
+ ::= { bladeRemoteControlEntry 10 }
+
+ remoteMediaTraySwitchEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Remote Media Tray Switch enablement status.
+ If the remote disk feature is disabled, this OID cannot be set."
+ ::= { bladeRemoteControlEntry 11 }
+
+ bladePolicy OBJECT IDENTIFIER ::= { bladeRemoteControl 2}
+ -- global blade remote control policy
+
+ bladePolicyPowerControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade remote power control enablement status policy."
+ ::= { bladePolicy 1 }
+
+ bladePolicyMediaTrayControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade media tray enablement status policy."
+ ::= { bladePolicy 2 }
+
+
+ bladePolicyKVMControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade KVM enablement status policy. Note that some types of blades
+ don't support KVM."
+ ::= { bladePolicy 3 }
+
+ bladePolicyWakeOnLanControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Wake On LAN enablement status policy. The
+ notApplicable(255) enumeration is not valid for SET
+ operations.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePolicy 4 }
+
+ bladePolicyMediaTraySwitchEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Remote Media Tray Switch enablement status policy.
+ If the remote disk feature is disabled, this OID cannot be set."
+ ::= { bladePolicy 5 }
+
+ bladePolicyMultipleRemoteVideoEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade multiple remote video sessions enablement status policy.
+
+ A maximum users can access the video of the same blade from remote
+ console when set to enabled. If it is disabled, only one user can
+ access the video from remote control."
+ ::= { bladePolicy 6 }
+
+ bladePolicyAutoPowerOn OBJECT-TYPE
+ SYNTAX INTEGER {
+ restore(1),
+ auto(2),
+ manual(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade auto-power on policy.
+ - restore: all blades will be powered on which were previously on.
+ - auto: all blades will automatically be powered on when power is applied to the chassis.
+ - manual: all blades will be left off until manually powered on by the user."
+ ::= { bladePolicy 7 }
+
+ bladePolicyDisconnectionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ noDisconnection(0),
+ forceDisconnection(1),
+ accessRequest(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade disconnection mode.
+ - noDisconnection: If the blade is already serving a maximum number of users, the requester can't get connection
+ - forcedisconnection: If the blade is already serving a maximum number of users, the requester can disconnect any connected user.
+ - accessRequest: If the blade is already serving an user, this one will get an access request from the requester."
+ ::= { bladePolicy 8 }
+
+ bladePolicySessionTimeOut OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Client session time out in minutes.
+ If there is no remote presence activity, after that time, the session will be closed authomatically."
+ ::= { bladePolicy 9 }
+
+ bladePolicyRequestTimeOut OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Client connection request time out in seconds.
+ In case of single session mode, if the requested user does not respond within this timeout, the user request will be accepted authomatically."
+ ::= { bladePolicy 10 }
+
+ bladePolicyRetryTimeOut OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Client connection retry time out in seconds.
+ It is possible that the current blade access is negotiated by other 2 clients. If the third comes it will need to wait and retry to connect after a while."
+ ::= { bladePolicy 11 }
+
+ bladePolicySessionLostTimeOut OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Client session lost in minutes.
+ Amount of time before session closes due to loss of session, and user may regain control. This may happen if for example the client machine loses a network connection."
+ ::= { bladePolicy 12 }
+
+ -- ********************************************************************************
+ -- Blade system health state params
+ -- ********************************************************************************
+
+ bladeMonitors OBJECT IDENTIFIER ::= { processorBlade 5 }
+
+ bladeSystemStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeSystemStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade status information."
+ ::= { bladeMonitors 1 }
+
+ bladeSystemStatusEntry OBJECT-TYPE
+ SYNTAX BladeSystemStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade system status entry"
+ INDEX { bladeStatusIndex }
+ ::= { bladeSystemStatusTable 1 }
+
+
+ BladeSystemStatusEntry ::= SEQUENCE {
+ bladeStatusIndex INTEGER,
+ bladeId INTEGER,
+ bladeExists INTEGER,
+ bladePowerState INTEGER,
+ bladeHealthState INTEGER,
+ bladeName OCTET STRING,
+ bladeRemotePowerEnable INTEGER,
+ bladeRemoteMediaTrayEnable INTEGER,
+ bladeRemoteKVMEnable INTEGER,
+ bladeConnectionType INTEGER,
+ bladeOwnsKVM INTEGER,
+ bladeOwnsMediaTray INTEGER,
+ bladeRemoteWakeOnLanEnable INTEGER,
+ bladeServerExpansion INTEGER,
+ bladeWidth INTEGER,
+ bladeSupportCapacityOnDemand INTEGER, -- deprecated
+ bladeServerExpansion2 INTEGER,
+ bladecKVMStatus INTEGER,
+ bladeConnectionType2 INTEGER,
+ bladeConnectionType3 INTEGER,
+ bladeConnectionType4 INTEGER,
+ bladeConnectionType5 INTEGER,
+ bladeHighSpeedConnectionType INTEGER,
+ bladeIOCompatibility OCTET STRING,
+ bladeInventoryReady INTEGER
+ }
+
+
+ bladeStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade system status index."
+ ::= { bladeSystemStatusEntry 1 }
+
+ bladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeSystemStatusEntry 2 }
+
+ bladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeSystemStatusEntry 3 }
+
+ bladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeSystemStatusEntry 4 }
+
+ bladeHealthState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ critical(3),
+ kernelMode(4),
+ discovering(5),
+ commError(6),
+ noPower(7),
+ flashing(8),
+ initFailure(9),
+ insufficientPower(10),
+ powerDenied(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The system health state for the blade.
+
+ Unknown: Blade is in an undefined state.
+ Good: Blade is operating normally.
+ Warning: One or more outstanding warnings exist for this blade.
+ Critical: One or more outstanding critical events for this blade.
+ Kernel Mode: Blade is in kernel mode.
+ Discovering: The AMM is currently in the process of discovering this blade.
+ Communications Error: The AMM failed to communicate with this blade.
+ No Power: No power to the blade's domain.
+ Flashing: Flashing in progress.
+ Initialization Failure: Blade failed to initialized.
+ Insufficient Power: Not enough power is left in the blade's domain to power the blade.
+ Power Denied: Power was denied to the blade."
+ ::= { bladeSystemStatusEntry 5 }
+
+ bladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeSystemStatusEntry 6 }
+
+ bladeRemotePowerEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Remote power state for the blade.
+ 0x01 indicates enabled."
+ ::= { bladeSystemStatusEntry 7 }
+
+ bladeRemoteMediaTrayEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Remote Media Tray state for the blade.
+ 0x01 indicates enabled."
+ ::= { bladeSystemStatusEntry 8 }
+
+ bladeRemoteKVMEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Remote keyboard/video/monitor state for the blade.
+ 0x01 indicates enabled. Note that some types of blades
+ don't support KVM"
+ ::= { bladeSystemStatusEntry 9 }
+
+ bladeConnectionType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ ethernet(1),
+ fiber(2),
+ serial(3),
+ opticalPassThrough(4),
+ infiniband(5),
+ iSCSI(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Connection type of the expansion card number one."
+ ::= { bladeSystemStatusEntry 10 }
+
+ bladeOwnsKVM OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the MM owns the KVM.
+ 0 = false, 1 = true. Note that some types of blades
+ don't support KVM"
+ ::= { bladeSystemStatusEntry 11 }
+
+ bladeOwnsMediaTray OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade owns the Media Tray.
+ 0 = false, 1 = true."
+ ::= { bladeSystemStatusEntry 12 }
+
+ bladeRemoteWakeOnLanEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Remote wake on LAN state for the blade.
+ 0x01 indicates enabled."
+ ::= { bladeSystemStatusEntry 13 }
+
+ bladeServerExpansion OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This shows whether this blade has an expansion board attached.
+ A yes column indicates that an expansion board is installed for this
+ blade."
+ ::= { bladeSystemStatusEntry 14 }
+
+ bladeWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the blade including any supplement blade attached to it"
+ ::= { bladeSystemStatusEntry 15 }
+
+ bladeSupportCapacityOnDemand OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "This shows whether this blade support Capacity On Demand.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { bladeSystemStatusEntry 16 }
+
+ bladeServerExpansion2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This shows whether this blade has an expansion board attached.
+ A yes column indicates that an expansion board is installed for this
+ blade."
+ ::= { bladeSystemStatusEntry 17 }
+
+ bladecKVMStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ notPresent(0),
+ notReady(1),
+ ready(2),
+ active(3),
+ disabled(4),
+ notAvailable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This shows whether this blade has a concurrent keyboard, video, and
+ mouse (cKVM) card installed and the status of cKVM on the blade.
+
+ Not present: A cKVM card is not installed.
+ Not ready: A cKVM card is installed but is not functional.
+ Ready: A cKVM card is installed and is functional, with no cKVM session in progress.
+ Active: A cKVM card is installed and is functional, with a cKVM session currently in progress.
+ Disabled: A cKVM card is not enabled on this blade.
+ Not available: A cKVM card is installed but the status is not available."
+ ::= { bladeSystemStatusEntry 21 }
+
+ bladeConnectionType2 OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ ethernet(1),
+ fiber(2),
+ serial(3),
+ opticalPassThrough(4),
+ infiniband(5),
+ iSCSI(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Connection type of the expansion card number 2."
+ ::= { bladeSystemStatusEntry 22 }
+
+ bladeConnectionType3 OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ ethernet(1),
+ fiber(2),
+ serial(3),
+ opticalPassThrough(4),
+ infiniband(5),
+ iSCSI(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Connection type of the expansion card number 3."
+ ::= { bladeSystemStatusEntry 23 }
+
+ bladeConnectionType4 OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ ethernet(1),
+ fiber(2),
+ serial(3),
+ opticalPassThrough(4),
+ infiniband(5),
+ iSCSI(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Connection type of the expansion card number 4."
+ ::= { bladeSystemStatusEntry 24 }
+
+ bladeConnectionType5 OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ ethernet(1),
+ fiber(2),
+ serial(3),
+ opticalPassThrough(4),
+ infiniband(5),
+ iSCSI(6)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Connection type of the expansion card number 5."
+ ::= { bladeSystemStatusEntry 25 }
+
+ bladeHighSpeedConnectionType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ ethernet(1),
+ fiber(2),
+ serial(3),
+ opticalPassThrough(4),
+ infiniband(5),
+ iSCSI(6),
+ infinibandPassThrough(7)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Connection type of the high speed expansion card number 1."
+ ::= { bladeSystemStatusEntry 41 }
+
+ bladeIOCompatibility OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "I/O compatibility status for the blade.
+
+ The possible values and their meanings are as follows:
+ unknown: This indicates a communication error for the blade.
+ ok: This is the normal (good) case where the blade and the
+ corresponding I/O modules it is internally wired to have no
+ compatibility issues.
+ noIOMs: This means there are no I/O modules in any of the
+ corresponding I/O module bays this blade is internally wired to.
+ attention: This indicates that one or more of the corresponding
+ I/O modules are in communication error.
+ mismatch: This indicates one of the following cases:
+ Fabric types are incompatible
+ An unknown I/O module type
+ An unknown fabric type on the blade"
+ ::= { bladeSystemStatusEntry 51 }
+
+ bladeInventoryReady OBJECT-TYPE
+ SYNTAX INTEGER {
+ notReady(0),
+ ready(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "When a blade management controller or the AMM is reset, the
+ blade inventory data is refreshed in the AMM database. This includes
+ items like IBM VPD (e.g. - serial number, UUID) and MAC address information.
+
+ Applications need to know when this information has been populated on the AMM
+ before they begin to query it using SNMP or other means. This simple flag
+ object will return a ready or notReady indication for each blade regarding the
+ status of this information.
+
+ Notes:
+
+ For blades that are experiencing a 'communication failure' or
+ 'initialization failure' condition, this object will continue to indicate
+ notReady until the condition is resolved. Therefore, any application that
+ polls this object should also incorporate a timeout period. As of AMM
+ release v5.3, a 10 minute timeout seems to be a minimum suggested polling period."
+ ::= { bladeSystemStatusEntry 52 }
+
+
+ bladeHealthSummaryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeHealthSummaryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade health summary information.
+ Contains information about the overall blade health status."
+ ::= { bladeMonitors 2 }
+
+ bladeHealthSummaryEntry OBJECT-TYPE
+ SYNTAX BladeHealthSummaryEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade health summary entry"
+ INDEX { bladeHealthSummaryIndex }
+ ::= { bladeHealthSummaryTable 1 }
+
+
+ BladeHealthSummaryEntry ::= SEQUENCE {
+ bladeHealthSummaryIndex INTEGER,
+ bladeHealthSummaryBladeId INTEGER,
+ bladeHealthSummarySeverity OCTET STRING,
+ bladeHealthSummaryDescription OCTET STRING,
+ bladeHealthSummaryDateTime OCTET STRING
+ }
+
+
+ bladeHealthSummaryIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade health summary index."
+ ::= { bladeHealthSummaryEntry 1 }
+
+ bladeHealthSummaryBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeHealthSummaryEntry 2 }
+
+ bladeHealthSummarySeverity OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System health summary severity."
+ ::= { bladeHealthSummaryEntry 3 }
+
+ bladeHealthSummaryDescription OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System health summary description."
+ ::= { bladeHealthSummaryEntry 4 }
+
+ bladeHealthSummaryDateTime OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System health summary date time."
+ ::= { bladeHealthSummaryEntry 5 }
+
+
+ bladeTemperaturesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeTemperaturesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade temperatures information."
+ ::= { bladeMonitors 3 }
+
+ bladeTemperaturesEntry OBJECT-TYPE
+ SYNTAX BladeTemperaturesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade temperatures table entry"
+ INDEX { temperatureIndex }
+ ::= { bladeTemperaturesTable 1 }
+
+
+ BladeTemperaturesEntry ::= SEQUENCE {
+ temperatureIndex INTEGER,
+ temperatureBladeId INTEGER,
+ temperatureBladeExists INTEGER,
+ temperatureBladePowerState INTEGER,
+ temperatureBladeName OCTET STRING,
+ temperatureCPU1 OCTET STRING,
+ temperatureCPU2 OCTET STRING,
+ temperatureCPU3 OCTET STRING,
+ temperatureCPU4 OCTET STRING,
+ temperatureDASD1 OCTET STRING,
+ bladeSensorTempCapability INTEGER,
+ bladeSensor1Temp OCTET STRING,
+ bladeSensor2Temp OCTET STRING,
+ bladeSensor3Temp OCTET STRING,
+ bladeSensor4Temp OCTET STRING,
+ bladeSensor5Temp OCTET STRING,
+ bladeSensor6Temp OCTET STRING,
+ bladeSensor7Temp OCTET STRING,
+ bladeSensor8Temp OCTET STRING,
+ bladeSensor9Temp OCTET STRING
+ }
+
+ temperatureIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade temperatures table index."
+ ::= { bladeTemperaturesEntry 1 }
+
+
+ temperatureBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeTemperaturesEntry 2 }
+
+ temperatureBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeTemperaturesEntry 3 }
+
+ temperatureBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeTemperaturesEntry 4 }
+
+ temperatureBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeTemperaturesEntry 5 }
+
+ temperatureCPU1 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 6 }
+
+ temperatureCPU2 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 7 }
+
+ temperatureCPU3 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 8 }
+
+ temperatureCPU4 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 9 }
+
+ temperatureDASD1 OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade DASD temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 10 }
+
+ bladeSensorTempCapability OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade is IPMI capable or not."
+ ::= { bladeTemperaturesEntry 11 }
+
+ bladeSensor1Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 12 }
+
+ bladeSensor2Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 13 }
+
+ bladeSensor3Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 14 }
+
+ bladeSensor4Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 15 }
+
+ bladeSensor5Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 16 }
+
+ bladeSensor6Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 17 }
+
+ bladeSensor7Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 18 }
+
+ bladeSensor8Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 19 }
+
+ bladeSensor9Temp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Temperature reading for an IPMI blade expressed in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperaturesEntry 20 }
+
+ bladeTemperatureThresholdsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeTemperatureThresholdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade temperature thresholds information."
+ ::= { bladeMonitors 4 }
+
+ bladeTemperatureThresholdsEntry OBJECT-TYPE
+ SYNTAX BladeTemperatureThresholdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade temperature thresholds table entry"
+ INDEX { temperatureThresholdIndex }
+ ::= { bladeTemperatureThresholdsTable 1 }
+
+
+ BladeTemperatureThresholdsEntry ::= SEQUENCE {
+ temperatureThresholdIndex INTEGER,
+ temperatureThresholdBladeId INTEGER,
+ temperatureThresholdBladeExists INTEGER,
+ temperatureThresholdBladePowerState INTEGER,
+ temperatureThresholdBladeName OCTET STRING,
+ temperatureCPU1HardShutdown OCTET STRING,
+ temperatureCPU1Warning OCTET STRING,
+ temperatureCPU1WarningReset OCTET STRING,
+ temperatureCPU2HardShutdown OCTET STRING,
+ temperatureCPU2Warning OCTET STRING,
+ temperatureCPU2WarningReset OCTET STRING,
+ temperatureCPU3HardShutdown OCTET STRING,
+ temperatureCPU3Warning OCTET STRING,
+ temperatureCPU3WarningReset OCTET STRING,
+ temperatureCPU4HardShutdown OCTET STRING,
+ temperatureCPU4Warning OCTET STRING,
+ temperatureCPU4WarningReset OCTET STRING,
+ temperatureDASD1HardShutdown OCTET STRING,
+ temperatureDASD1Warning OCTET STRING,
+ temperatureDASD1WarningReset OCTET STRING,
+ bladeTempThresholdSensorCapability INTEGER,
+ temperatureSensor1HardShutdown OCTET STRING,
+ temperatureSensor1Warning OCTET STRING,
+ temperatureSensor1WarningReset OCTET STRING,
+ temperatureSensor2HardShutdown OCTET STRING,
+ temperatureSensor2Warning OCTET STRING,
+ temperatureSensor2WarningReset OCTET STRING,
+ temperatureSensor3HardShutdown OCTET STRING,
+ temperatureSensor3Warning OCTET STRING,
+ temperatureSensor3WarningReset OCTET STRING,
+ temperatureSensor4HardShutdown OCTET STRING,
+ temperatureSensor4Warning OCTET STRING,
+ temperatureSensor4WarningReset OCTET STRING,
+ temperatureSensor5HardShutdown OCTET STRING,
+ temperatureSensor5Warning OCTET STRING,
+ temperatureSensor5WarningReset OCTET STRING,
+ temperatureSensor6HardShutdown OCTET STRING,
+ temperatureSensor6Warning OCTET STRING,
+ temperatureSensor6WarningReset OCTET STRING,
+ temperatureSensor7HardShutdown OCTET STRING,
+ temperatureSensor7Warning OCTET STRING,
+ temperatureSensor7WarningReset OCTET STRING,
+ temperatureSensor8HardShutdown OCTET STRING,
+ temperatureSensor8Warning OCTET STRING,
+ temperatureSensor8WarningReset OCTET STRING,
+ temperatureSensor9HardShutdown OCTET STRING,
+ temperatureSensor9Warning OCTET STRING,
+ temperatureSensor9WarningReset OCTET STRING
+ }
+
+ temperatureThresholdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade temperature threshold table index."
+ ::= { bladeTemperatureThresholdsEntry 1 }
+
+
+ temperatureThresholdBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeTemperatureThresholdsEntry 2 }
+
+ temperatureThresholdBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeTemperatureThresholdsEntry 3 }
+
+ temperatureThresholdBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeTemperatureThresholdsEntry 4 }
+
+ temperatureThresholdBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeTemperatureThresholdsEntry 5 }
+
+ temperatureCPU1HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU hard shutdown temperature in degrees
+ centigrade(C). If the component's temperature rises above
+ this value the system will be powered off immediately.
+ If enabled, a critical alert/event will be generated.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 6 }
+
+ temperatureCPU1Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU warning temperature in degrees centigrade(C).
+ If the temperature rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 7 }
+
+ temperatureCPU1WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU warning reset temperature in degrees
+ centigrade(C). If the temperature rises above this value and
+ if a warning alert/event had previously been created then the
+ alert/event will be reset.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 8 }
+
+ temperatureCPU2HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU hard shutdown temperature in degrees
+ centigrade(C). If the component's temperature rises above
+ this value the system will be powered off immediately.
+ If enabled, a critical alert/event will be generated.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 9 }
+
+ temperatureCPU2Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU warning temperature in degrees centigrade(C).
+ If the temperature rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 10 }
+
+ temperatureCPU2WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU warning reset temperature in degrees
+ centigrade(C). If the temperature rises above this value and
+ if a warning alert/event had previously been created then the
+ alert/event will be reset.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 11 }
+
+ temperatureCPU3HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU hard shutdown temperature in degrees
+ centigrade(C). If the component's temperature rises above
+ this value the system will be powered off immediately.
+ If enabled, a critical alert/event will be generated.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 12 }
+
+ temperatureCPU3Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU warning temperature in degrees centigrade(C).
+ If the temperature rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 13 }
+
+ temperatureCPU3WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU warning reset temperature in degrees
+ centigrade(C). If the temperature rises above this value and
+ if a warning alert/event had previously been created then the
+ alert/event will be reset.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 14 }
+
+ temperatureCPU4HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU hard shutdown temperature in degrees
+ centigrade(C). If the component's temperature rises above
+ this value the system will be powered off immediately.
+ If enabled, a critical alert/event will be generated.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 15 }
+
+ temperatureCPU4Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU warning temperature in degrees centigrade(C).
+ If the temperature rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 16 }
+
+ temperatureCPU4WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade CPU warning reset temperature in degrees
+ centigrade(C). If the temperature rises above this value and
+ if a warning alert/event had previously been created then the
+ alert/event will be reset.
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 17 }
+
+ temperatureDASD1HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade DASD hard shutdown temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 18 }
+
+ temperatureDASD1Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade DASD warning temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 19 }
+
+ temperatureDASD1WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade DASD warning reset temperature in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 20 }
+
+ bladeTempThresholdSensorCapability OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade is IPMI capable or not."
+ ::= { bladeTemperatureThresholdsEntry 21 }
+
+ temperatureSensor1HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 22 }
+
+ temperatureSensor1Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 23 }
+
+ temperatureSensor1WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 24 }
+
+ temperatureSensor2HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 25 }
+
+ temperatureSensor2Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 26 }
+
+ temperatureSensor2WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 27 }
+
+ temperatureSensor3HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 28 }
+
+ temperatureSensor3Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 29 }
+
+ temperatureSensor3WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 30 }
+
+ temperatureSensor4HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 31 }
+
+ temperatureSensor4Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 32 }
+
+ temperatureSensor4WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 33 }
+
+ temperatureSensor5HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 34 }
+
+ temperatureSensor5Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 35 }
+
+ temperatureSensor5WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 36 }
+
+ temperatureSensor6HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 37 }
+
+ temperatureSensor6Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 38 }
+
+ temperatureSensor6WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 39 }
+
+ temperatureSensor7HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 40 }
+
+ temperatureSensor7Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 41 }
+
+ temperatureSensor7WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 42 }
+
+ temperatureSensor8HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 43 }
+
+ temperatureSensor8Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 44 }
+
+ temperatureSensor8WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 45 }
+
+ temperatureSensor9HardShutdown OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 46 }
+
+ temperatureSensor9Warning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 47 }
+
+ temperatureSensor9WarningReset OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade hard shutdown temperature for IPMI blades in degrees centigrade(C).
+ An octet string expressed as 'sddd.dd Centigrade' where:
+ s is the sign ('-' for negative or blank space for positive)
+ d is a decimal digit or blank space for leading zeroes.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Temperature' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeTemperatureThresholdsEntry 48 }
+
+
+
+ bladeVoltagesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeVoltagesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade voltages information."
+ ::= { bladeMonitors 5 }
+
+ bladeVoltagesEntry OBJECT-TYPE
+ SYNTAX BladeVoltagesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade voltages table entry"
+ INDEX { voltageIndex }
+ ::= { bladeVoltagesTable 1 }
+
+ BladeVoltagesEntry ::= SEQUENCE {
+ voltageIndex INTEGER,
+ voltageBladeId INTEGER,
+ voltageBladeExists INTEGER,
+ voltageBladePowerState INTEGER,
+ voltageBladeName OCTET STRING,
+ bladePlus5Volt OCTET STRING,
+ bladePlus3pt3Volt OCTET STRING,
+ bladePlus12Volt OCTET STRING,
+ bladePlus2pt5Volt OCTET STRING,
+ bladePlus1pt5Volt OCTET STRING,
+ bladePlus1pt25Volt OCTET STRING,
+ bladeVRM1Volt OCTET STRING,
+ bladeSensorVoltCapability INTEGER,
+ bladeSensor1Volt OCTET STRING,
+ bladeSensor2Volt OCTET STRING,
+ bladeSensor3Volt OCTET STRING,
+ bladeSensor4Volt OCTET STRING,
+ bladeSensor5Volt OCTET STRING,
+ bladeSensor6Volt OCTET STRING,
+ bladeSensor7Volt OCTET STRING,
+ bladeSensor8Volt OCTET STRING,
+ bladeSensor9Volt OCTET STRING,
+ bladeSensor10Volt OCTET STRING,
+ bladeSensor11Volt OCTET STRING,
+ bladeSensor12Volt OCTET STRING,
+ bladeSensor13Volt OCTET STRING,
+ bladeSensor14Volt OCTET STRING,
+ bladeSensor15Volt OCTET STRING,
+ bladeSensor16Volt OCTET STRING,
+ bladeSensor17Volt OCTET STRING,
+ bladeSensor18Volt OCTET STRING,
+ bladeSensor19Volt OCTET STRING,
+ bladeSensor20Volt OCTET STRING,
+ bladeSensor21Volt OCTET STRING,
+ bladeSensor22Volt OCTET STRING,
+ bladeSensor23Volt OCTET STRING,
+ bladeSensor24Volt OCTET STRING,
+ bladeSensor25Volt OCTET STRING,
+ bladeSensor26Volt OCTET STRING,
+ bladeSensor27Volt OCTET STRING,
+ bladeSensor28Volt OCTET STRING,
+ bladeSensor29Volt OCTET STRING,
+ bladeSensor30Volt OCTET STRING
+ }
+
+ voltageIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade voltages table index."
+ ::= { bladeVoltagesEntry 1 }
+
+
+ voltageBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeVoltagesEntry 2 }
+
+ voltageBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeVoltagesEntry 3 }
+
+ voltageBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeVoltagesEntry 4 }
+
+ voltageBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeVoltagesEntry 5 }
+
+ bladePlus5Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+5 Volt power supply voltage reading for the blade
+ expressed in Volts(V). An octet string expressed as
+ 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 6 }
+
+ bladePlus3pt3Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+3.3 Volt power supply voltage reading for the blade
+ expressed in Volts(V). An octet string expressed as
+ 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 7 }
+
+ bladePlus12Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+12 Volt power supply voltage reading for the blade
+ expressed in Volts(V). An octet string expressed as
+ 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 8 }
+
+ bladePlus2pt5Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+2.5 Volt power supply voltage reading for the blade
+ expressed in Volts(V). An octet string expressed as
+ 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 10 }
+
+ bladePlus1pt5Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+1.5 Volt power supply voltage reading for the blade
+ expressed in Volts(V). An octet string expressed as
+ 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 11 }
+
+ bladePlus1pt25Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "+1.25 Volt power supply voltage reading for the blade
+ expressed in Volts(V). An octet string expressed as
+ 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 12 }
+
+ bladeVRM1Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "VRM 1 voltage reading for the blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 13 }
+
+ bladeSensorVoltCapability OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade is IPMI capable or not."
+ ::= { bladeVoltagesEntry 14 }
+
+ bladeSensor1Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 15 }
+
+ bladeSensor2Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 16 }
+
+ bladeSensor3Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 17 }
+
+ bladeSensor4Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 18 }
+
+ bladeSensor5Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 19 }
+
+ bladeSensor6Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 20 }
+
+ bladeSensor7Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 21 }
+
+ bladeSensor8Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 22 }
+
+ bladeSensor9Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 23 }
+
+ bladeSensor10Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 24 }
+
+ bladeSensor11Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 25 }
+
+ bladeSensor12Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 26 }
+
+ bladeSensor13Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 27 }
+
+ bladeSensor14Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 28 }
+
+ bladeSensor15Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 29 }
+
+ bladeSensor16Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 30 }
+
+ bladeSensor17Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 31 }
+
+ bladeSensor18Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 32 }
+
+ bladeSensor19Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 33 }
+
+ bladeSensor20Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 34 }
+
+ bladeSensor21Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 35 }
+
+ bladeSensor22Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 36 }
+
+ bladeSensor23Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 37 }
+
+ bladeSensor24Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 38 }
+
+ bladeSensor25Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 39 }
+
+
+ bladeSensor26Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 40 }
+
+ bladeSensor27Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 41 }
+
+
+ bladeSensor28Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 42 }
+
+ bladeSensor29Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 43 }
+
+ bladeSensor30Volt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage reading for an IPMI blade expressed in Volts(V).
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltagesEntry 44 }
+
+
+ bladeVoltageThresholdsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeVoltageThresholdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade VoltageThresholds information."
+ ::= { bladeMonitors 6 }
+
+
+ bladeVoltageThresholdsEntry OBJECT-TYPE
+ SYNTAX BladeVoltageThresholdsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade voltage thresholds table entry"
+ INDEX { voltageThresholdIndex }
+ ::= { bladeVoltageThresholdsTable 1 }
+
+
+ BladeVoltageThresholdsEntry ::= SEQUENCE {
+ voltageThresholdIndex INTEGER,
+ voltageThresholdBladeId INTEGER,
+ voltageThresholdBladeExists INTEGER,
+ voltageThresholdBladePowerState INTEGER,
+ voltageThresholdBladeName OCTET STRING,
+ bladePlus5VoltHighWarning OCTET STRING,
+ bladePlus5VoltLowWarning OCTET STRING,
+ bladePlus3pt3VoltHighWarning OCTET STRING,
+ bladePlus3pt3VoltLowWarning OCTET STRING,
+ bladePlus12VoltHighWarning OCTET STRING,
+ bladePlus12VoltLowWarning OCTET STRING,
+ bladePlus2pt5VoltHighWarning OCTET STRING,
+ bladePlus2pt5VoltLowWarning OCTET STRING,
+ bladePlus1pt5VoltHighWarning OCTET STRING,
+ bladePlus1pt5VoltLowWarning OCTET STRING,
+ bladePlus1pt25VoltHighWarning OCTET STRING,
+ bladePlus1pt25VoltLowWarning OCTET STRING,
+ bladeVoltThresholdSensorCapability INTEGER,
+ bladeSensor1VoltHighWarning OCTET STRING,
+ bladeSensor1VoltLowWarning OCTET STRING,
+ bladeSensor2VoltHighWarning OCTET STRING,
+ bladeSensor2VoltLowWarning OCTET STRING,
+ bladeSensor3VoltHighWarning OCTET STRING,
+ bladeSensor3VoltLowWarning OCTET STRING,
+ bladeSensor4VoltHighWarning OCTET STRING,
+ bladeSensor4VoltLowWarning OCTET STRING,
+ bladeSensor5VoltHighWarning OCTET STRING,
+ bladeSensor5VoltLowWarning OCTET STRING,
+ bladeSensor6VoltHighWarning OCTET STRING,
+ bladeSensor6VoltLowWarning OCTET STRING,
+ bladeSensor7VoltHighWarning OCTET STRING,
+ bladeSensor7VoltLowWarning OCTET STRING,
+ bladeSensor8VoltHighWarning OCTET STRING,
+ bladeSensor8VoltLowWarning OCTET STRING,
+ bladeSensor9VoltHighWarning OCTET STRING,
+ bladeSensor9VoltLowWarning OCTET STRING,
+ bladeSensor10VoltHighWarning OCTET STRING,
+ bladeSensor10VoltLowWarning OCTET STRING,
+ bladeSensor11VoltHighWarning OCTET STRING,
+ bladeSensor11VoltLowWarning OCTET STRING,
+ bladeSensor12VoltHighWarning OCTET STRING,
+ bladeSensor12VoltLowWarning OCTET STRING,
+ bladeSensor13VoltHighWarning OCTET STRING,
+ bladeSensor13VoltLowWarning OCTET STRING,
+ bladeSensor14VoltHighWarning OCTET STRING,
+ bladeSensor14VoltLowWarning OCTET STRING,
+ bladeSensor15VoltHighWarning OCTET STRING,
+ bladeSensor15VoltLowWarning OCTET STRING,
+ bladeSensor16VoltHighWarning OCTET STRING,
+ bladeSensor16VoltLowWarning OCTET STRING,
+ bladeSensor17VoltHighWarning OCTET STRING,
+ bladeSensor17VoltLowWarning OCTET STRING,
+ bladeSensor18VoltHighWarning OCTET STRING,
+ bladeSensor18VoltLowWarning OCTET STRING,
+ bladeSensor19VoltHighWarning OCTET STRING,
+ bladeSensor19VoltLowWarning OCTET STRING,
+ bladeSensor20VoltHighWarning OCTET STRING,
+ bladeSensor20VoltLowWarning OCTET STRING,
+ bladeSensor21VoltHighWarning OCTET STRING,
+ bladeSensor21VoltLowWarning OCTET STRING,
+ bladeSensor22VoltHighWarning OCTET STRING,
+ bladeSensor22VoltLowWarning OCTET STRING,
+ bladeSensor23VoltHighWarning OCTET STRING,
+ bladeSensor23VoltLowWarning OCTET STRING,
+ bladeSensor24VoltHighWarning OCTET STRING,
+ bladeSensor24VoltLowWarning OCTET STRING,
+ bladeSensor25VoltHighWarning OCTET STRING,
+ bladeSensor25VoltLowWarning OCTET STRING,
+ bladeSensor26VoltHighWarning OCTET STRING,
+ bladeSensor26VoltLowWarning OCTET STRING,
+ bladeSensor27VoltHighWarning OCTET STRING,
+ bladeSensor27VoltLowWarning OCTET STRING,
+ bladeSensor28VoltHighWarning OCTET STRING,
+ bladeSensor28VoltLowWarning OCTET STRING,
+ bladeSensor29VoltHighWarning OCTET STRING,
+ bladeSensor29VoltLowWarning OCTET STRING,
+ bladeSensor30VoltHighWarning OCTET STRING,
+ bladeSensor30VoltLowWarning OCTET STRING
+ }
+
+ voltageThresholdIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade voltage thresholds table index."
+ ::= { bladeVoltageThresholdsEntry 1 }
+
+
+ voltageThresholdBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeVoltageThresholdsEntry 2 }
+
+ voltageThresholdBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeVoltageThresholdsEntry 3 }
+
+ voltageThresholdBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeVoltageThresholdsEntry 4 }
+
+ voltageThresholdBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeVoltageThresholdsEntry 5 }
+
+ bladePlus5VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 6 }
+
+ bladePlus5VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage drops below this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 7 }
+
+ bladePlus3pt3VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 8 }
+
+ bladePlus3pt3VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage drops below this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 9 }
+
+ bladePlus12VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 10 }
+
+ bladePlus12VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage drops below this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 11 }
+
+ bladePlus2pt5VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 14 }
+
+ bladePlus2pt5VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage drops below this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 15 }
+
+ bladePlus1pt5VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 16 }
+
+ bladePlus1pt5VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage drops below this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 17 }
+
+ bladePlus1pt25VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage rises above this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 18 }
+
+ bladePlus1pt25VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading expressed in Volts(V).
+ If the voltage drops below this value a warning alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 19 }
+
+ bladeVoltThresholdSensorCapability OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade is IPMI capable or not."
+ ::= { bladeVoltageThresholdsEntry 22 }
+
+ bladeSensor1VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 23 }
+
+ bladeSensor1VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 24 }
+
+ bladeSensor2VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 25 }
+
+ bladeSensor2VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 26 }
+
+ bladeSensor3VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 27 }
+
+ bladeSensor3VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 28 }
+
+ bladeSensor4VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 29 }
+
+ bladeSensor4VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 30 }
+
+ bladeSensor5VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 31 }
+
+ bladeSensor5VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 32 }
+
+ bladeSensor6VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 33 }
+
+ bladeSensor6VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 34 }
+
+ bladeSensor7VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 35 }
+
+ bladeSensor7VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 36 }
+
+ bladeSensor8VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 37 }
+
+ bladeSensor8VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 38 }
+
+ bladeSensor9VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 39 }
+
+ bladeSensor9VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 40 }
+
+ bladeSensor10VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 41 }
+
+ bladeSensor10VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 42 }
+
+ bladeSensor11VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 43 }
+
+ bladeSensor11VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 44 }
+
+ bladeSensor12VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 45 }
+
+ bladeSensor12VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 46 }
+
+ bladeSensor13VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 47 }
+
+ bladeSensor13VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 48 }
+
+ bladeSensor14VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 49 }
+
+ bladeSensor14VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 50 }
+
+ bladeSensor15VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 51 }
+
+ bladeSensor15VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 52 }
+
+ bladeSensor16VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 53 }
+
+ bladeSensor16VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 54 }
+
+ bladeSensor17VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 55 }
+
+ bladeSensor17VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 56 }
+
+ bladeSensor18VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 57 }
+
+ bladeSensor18VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 58 }
+
+ bladeSensor19VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 59 }
+
+ bladeSensor19VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 60 }
+
+ bladeSensor20VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 61 }
+
+ bladeSensor20VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 62 }
+
+ bladeSensor21VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 63 }
+
+ bladeSensor21VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 64 }
+
+ bladeSensor22VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 65 }
+
+ bladeSensor22VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 66 }
+
+ bladeSensor23VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 67 }
+
+ bladeSensor23VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 68 }
+
+ bladeSensor24VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 69 }
+
+ bladeSensor24VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 70 }
+
+ bladeSensor25VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 71 }
+
+ bladeSensor25VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 72 }
+
+
+ bladeSensor26VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 73 }
+
+ bladeSensor26VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 74 }
+
+ bladeSensor27VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 75 }
+
+ bladeSensor27VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 76 }
+
+ bladeSensor28VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 77 }
+
+ bladeSensor28VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 78 }
+
+ bladeSensor29VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 79 }
+
+ bladeSensor29VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 80 }
+
+ bladeSensor30VoltHighWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage rises above this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 81 }
+
+ bladeSensor30VoltLowWarning OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Voltage warning threshold reading for IPMI blades expressed in Volts(V).
+ If the voltage drops below this value, a critical alert/event
+ if enabled will be generated.
+ An octet string expressed as 'sdd.dd Volts' where:
+ s is the sign ('-' for negative or '+' for positive)
+ d is a decimal digit or blank space for a leading zero.
+ The string 'Not Readable!' indicates that the given monitor
+ is not supported on this system.
+ The string 'No Voltage' indicates that the given monitor
+ does not exist on this system or is powered off."
+ ::= { bladeVoltageThresholdsEntry 82 }
+
+ bladeIOCompatibilityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeIOCompatibilityEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of IO Compatibility status for the blade."
+ ::= { bladeMonitors 7 }
+
+ bladeIOCompatibilityEntry OBJECT-TYPE
+ SYNTAX BladeIOCompatibilityEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade IO Compatibility Status entry"
+ INDEX { bladeIOCompatibilityIndex }
+ ::= { bladeIOCompatibilityTable 1 }
+
+ BladeIOCompatibilityEntry ::= SEQUENCE {
+ bladeIOCompatibilityIndex INTEGER,
+ bladeIOCompatibilityBladeId INTEGER,
+ bladeIOCompatibilityBayNumber INTEGER,
+ bladeIOCompatibilityModuleBay OCTET STRING,
+ bladeIOCompatibilityModulePower OCTET STRING,
+ bladeIOCompatibilityModuleFabricType OCTET STRING,
+ bladeIOCompatibilityFabricOnBlade OCTET STRING,
+ bladeIOCompatibilityStatus OCTET STRING
+ }
+
+ bladeIOCompatibilityIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade I/O compatibility table index."
+ ::= { bladeIOCompatibilityEntry 1 }
+
+
+ bladeIOCompatibilityBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade numeric identifier."
+ ::= { bladeIOCompatibilityEntry 2 }
+
+ bladeIOCompatibilityBayNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Bay number of the blade or expension card."
+ ::= { bladeIOCompatibilityEntry 3 }
+
+ bladeIOCompatibilityModuleBay OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The modules (each one specified by module type and bay number)
+ that the blade can communicate with over the midplane networking fabric
+ (i.e. a physical path exists between the blade and this module, and
+ hardware exists on the blade to communicate with this module). "
+ ::= { bladeIOCompatibilityEntry 4 }
+
+ bladeIOCompatibilityModulePower OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power state of the module specified in bladeIOCompatibilityModuleBay.
+ n/a if module not installed."
+ ::= { bladeIOCompatibilityEntry 5 }
+
+ bladeIOCompatibilityModuleFabricType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The fabric type of the module specified in bladeIOCompatibilityModuleBay."
+ ::= { bladeIOCompatibilityEntry 6 }
+
+ bladeIOCompatibilityFabricOnBlade OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The fabric type for this channel on the blade (may be onboard fabric or
+ an expansion card)."
+ ::= { bladeIOCompatibilityEntry 7 }
+
+ bladeIOCompatibilityStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The compatibility status between the blade and the module specified
+ in bladeIOCompatibilityModuleBay.
+
+ The possible values are:
+ OK: No compatibility issues
+ No IOM: There is no module on the other side of the wire for this channel on the blade.
+ n/a: (Not applicable) The module specified in bladeIOCompatibilityModuleBay is a bridge,
+ so the blade port cannot connect to it.
+ Attention: The module specified in bladeIOCompatibilityModuleBay has a communication error.
+ Mismatch: Indicates one of the following cases:
+ Fabric types are incompatible
+ Module specified in bladeIOCompatibilityModuleBay is of unknown type
+ Unknown fabric type on the blade"
+ ::= { bladeIOCompatibilityEntry 8 }
+
+ bladePowerRestart OBJECT IDENTIFIER ::= { processorBlade 6 }
+ -- blade power/restart control
+
+ bladePowerRestartTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladePowerRestartEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade remote power control information.
+ Contains power on/off enablement status for each blade."
+ ::= { bladePowerRestart 1 }
+
+ bladePowerRestartEntry OBJECT-TYPE
+ SYNTAX BladePowerRestartEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade power restart table entry"
+ INDEX { powerRestartIndex }
+ ::= { bladePowerRestartTable 1 }
+
+
+ BladePowerRestartEntry ::= SEQUENCE {
+ powerRestartIndex INTEGER,
+ powerRestartBladeId INTEGER,
+ powerRestartBladeExists INTEGER,
+ powerRestartBladePowerState INTEGER,
+ powerRestartBladeHealthState INTEGER,
+ powerRestartBladeName OCTET STRING,
+ powerOnOffBlade INTEGER,
+ restartBlade INTEGER,
+ restartBladeSMP INTEGER,
+ restartBladeNMI INTEGER,
+ restartBladeClearNVRAM INTEGER,
+ restartBladeInvokeDiags INTEGER,
+ restartBladeInvokeDiagsFromDefaultBootList INTEGER,
+ restartBladeToSMSBootMenu INTEGER,
+ restartBladeToUEFIMenu INTEGER
+ }
+
+ powerRestartIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade power restart table index."
+ ::= { bladePowerRestartEntry 1 }
+
+
+ powerRestartBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladePowerRestartEntry 2 }
+
+ powerRestartBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladePowerRestartEntry 3 }
+
+ powerRestartBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified.
+ If the state cannot be determined, the unknown(255)
+ value is returned."
+ ::= { bladePowerRestartEntry 4 }
+
+ powerRestartBladeHealthState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ critical(3),
+ kernelMode(4),
+ discovering(5),
+ commError(6),
+ noPower(7),
+ flashing(8),
+ initFailure(9),
+ insufficientPower(10),
+ powerDenied(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The system health state for the blade.
+
+ Unknown: Blade is in an undefined state.
+ Good: Blade is operating normally.
+ Warning: One or more outstanding warnings exist for this blade.
+ Critical: One or more outstanding critical events for this blade.
+ Kernel Mode: Blade is in kernel mode.
+ Discovering: The AMM is currently in the process of discovering this blade.
+ Communications Error: The AMM failed to communicate with this blade.
+ No Power: No power to the blade's domain.
+ Flashing: Flashing in progress.
+ Initialization Failure: Blade failed to initialized.
+ Insufficient Power: Not enough power is left in the blade's domain to power the blade.
+ Power Denied: Power was denied to the blade."
+ ::= { bladePowerRestartEntry 5 }
+
+ powerRestartBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladePowerRestartEntry 6 }
+
+ powerOnOffBlade OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ softoff(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Control the power state of a specific blade.
+
+ Off: Power Off Blade.
+ On: Power On Blade.
+ Softoff: Shut Down OS and Power Off Blade. This operation is not
+ supported on all blades.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object. The powerRestartBladePowerState MIB object should be
+ used to check the power state of the blade(s)"
+ ::= { bladePowerRestartEntry 7 }
+
+ restartBlade OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restart a blade.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePowerRestartEntry 8 }
+
+ restartBladeSMP OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restart a blade's system management processor.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePowerRestartEntry 9 }
+
+ restartBladeNMI OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Issue an NMI to the blade. This option is not supported
+ on all blades.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePowerRestartEntry 10 }
+
+ restartBladeClearNVRAM OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restart a blade and set NVRAM to default values. This option is not
+ supported on all blades.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePowerRestartEntry 11 }
+
+ restartBladeInvokeDiags OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restart a blade and boot into diagnostic mode. This option is not
+ supported on all blades.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePowerRestartEntry 12 }
+
+ restartBladeInvokeDiagsFromDefaultBootList OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restart a blade and boot into diagnostic mode from Default Boot List
+ as defined on the blade. This option is not supported on all blades.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePowerRestartEntry 13 }
+
+ restartBladeToSMSBootMenu OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restart a blade to SMS boot menu. This option is not supported on
+ all blades.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePowerRestartEntry 14 }
+
+ restartBladeToUEFIMenu OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Restart a blade to UEFI setup menu. This option is not supported on
+ all blades.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladePowerRestartEntry 15 }
+
+
+ bladeConfiguration OBJECT IDENTIFIER ::= { processorBlade 7 }
+ -- blade power/restart control
+
+ bladeConfigurationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeConfigurationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade remote power control information.
+ Contains power on/off enablement status for each blade."
+ ::= { bladeConfiguration 1 }
+
+ bladeConfigurationEntry OBJECT-TYPE
+ SYNTAX BladeConfigurationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade configuration table entry"
+ INDEX { configurationIndex }
+ ::= { bladeConfigurationTable 1 }
+
+
+ BladeConfigurationEntry ::= SEQUENCE {
+ configurationIndex INTEGER,
+ configurationBladeId INTEGER,
+ configurationBladeExists INTEGER,
+ configurationBladePowerState INTEGER,
+ configurationBladeName OCTET STRING,
+ configurationBladecKVM INTEGER,
+ configurationBladeActiveBootMode INTEGER,
+ configurationBladePendingBootMode INTEGER
+ }
+
+ configurationIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade configuration table index."
+ ::= { bladeConfigurationEntry 1 }
+
+
+ configurationBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeConfigurationEntry 2 }
+
+ configurationBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeConfigurationEntry 3 }
+
+ configurationBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeConfigurationEntry 4 }
+
+ configurationBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeConfigurationEntry 5 }
+
+ configurationBladecKVM OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1),
+ notPresent(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the concurrent KVM function on specified blade.
+ If concurrent KVM is not supported by the blade, it displays 'notPresent'
+ and the concurrent KVM functionality can not be enabled or disabled."
+ ::= { bladeConfigurationEntry 6 }
+
+ configurationBladeActiveBootMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ temporary(1),
+ permanent(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the active copy of the firmware from which the blade is booting.
+ NOTE: Some blades do not support the automatic boot recovery. It displays
+ 'notApplicable' for such blades.
+ Booting from the temporary copy is recommended since it typically contains the
+ latest enhancements and fixes. Switching to the permanent copy should be reserved
+ for when booting from the temporary copy is no longer possible."
+ ::= { bladeConfigurationEntry 7 }
+
+ configurationBladePendingBootMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ temporary(1),
+ permanent(2),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the copy of the firmware from which the blade will boot
+ after the next reboot.
+ NOTE: Some blades do not support the automatic boot recovery. It displays
+ 'notApplicable' for such blades and the value can not be set.
+ Booting from the temporary copy is recommended since it typically contains the
+ latest enhancements and fixes. Switching to the permanent copy should be reserved
+ for when booting from the temporary copy is no longer possible."
+ ::= { bladeConfigurationEntry 8 }
+
+ -- Power Management Policy Settings
+ bladePowerManagementPolicy OBJECT IDENTIFIER ::= { bladeConfiguration 2 }
+
+ powerdomain1Oversubscription OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-allowed(0),
+ recoverable(1),
+ non-recoverable(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Power Management Policy settings for power domain 1."
+ ::= { bladePowerManagementPolicy 1 }
+
+ powerdomain2Oversubscription OBJECT-TYPE
+ SYNTAX INTEGER {
+ not-allowed(0),
+ recoverable(1),
+ non-recoverable(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Power Management Policy settings for power domain 2."
+ ::= { bladePowerManagementPolicy 2 }
+
+ acousticMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Acoustic mode setting for thermal conditions"
+ ::= { bladePowerManagementPolicy 3 }
+
+ nebsMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "NEBS (Network Equipment-Building System) mode setting for thermal conditions.
+ NOTE: This MIB object is for BladeCenter T, HT and TR only."
+ ::= { bladePowerManagementPolicy 4 }
+
+ bladecKVMEnableDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable cKVM function on all server blades."
+ ::= { bladeConfiguration 3 }
+
+ bladeIPAddrRangeStart OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "This field is used to configure the start of the IP address range for the blade
+ system management processors on the blades. These addresses are used on the
+ internal management network between the MM and the blade BSMPs. For example the
+ value of 10.10.10.1 means the BSMP on the blade in bay 1 will have IP address
+ 10.10.10.1, the BSMP on the blade in bay 2 will have IP address 10.10.10.2 and so on.
+
+ This field is deprecated and no longer supported. An attempt to SET this
+ object will be rejected, and any query will always return 0.0.0.0.
+ Refer to the bladeManagementNetworkInfoTable for the new objects providing
+ this information."
+ ::= { processorBlade 8 }
+
+ bladeCapacityOnDemand OBJECT IDENTIFIER ::= { processorBlade 9 }
+
+ bladeCapacityOnDemandTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeCapacityOnDemandEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Table of COD blade.
+
+ NOTE: This table is deprecated and no longer supported."
+ ::= { bladeCapacityOnDemand 1 }
+
+ bladeCapacityOnDemandEntry OBJECT-TYPE
+ SYNTAX BladeCapacityOnDemandEntry
+ ACCESS not-accessible
+ STATUS deprecated
+ DESCRIPTION
+ "Blade COD table entry
+ NOTE: This table is deprecated and no longer supported."
+ INDEX { bladeCapacityOnDemandIndex }
+ ::= { bladeCapacityOnDemandTable 1 }
+
+ BladeCapacityOnDemandEntry ::= SEQUENCE {
+ bladeCapacityOnDemandIndex INTEGER, -- deprecated
+ bladeCapacityOnDemandBladeName OCTET STRING, -- deprecated
+ bladeCapacityOnDemandState INTEGER -- deprecated
+ }
+
+ bladeCapacityOnDemandIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Blade configuration table index.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { bladeCapacityOnDemandEntry 1 }
+
+ bladeCapacityOnDemandBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The name of the blade as a null terminated string.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { bladeCapacityOnDemandEntry 2 }
+
+ bladeCapacityOnDemandState OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ standby(1),
+ active(2)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "The state of Capacity On Demand.
+ NOTE: This Mib object is deprecated and no longer supported."
+ ::= { bladeCapacityOnDemandEntry 3 }
+
+
+ bladeBootCountPowerOnTime OBJECT IDENTIFIER ::= { processorBlade 10 }
+ -- blade Count of number of boots for a blade and its Power On Time
+
+ bladeBootCountPowerOnTimeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeBootCountPowerOnTimeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table per blade of the number of boots for the blade and
+ the number of seconds the blade has been powered on."
+ ::= { bladeBootCountPowerOnTime 1 }
+
+ bladeBootCountPowerOnTimeEntry OBJECT-TYPE
+ SYNTAX BladeBootCountPowerOnTimeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The number of boots for the blade and
+ the number of seconds the blade has been powered on."
+ INDEX { bootCountPowerOnTimeBladeIndex }
+ ::= { bladeBootCountPowerOnTimeTable 1 }
+
+
+ BladeBootCountPowerOnTimeEntry ::= SEQUENCE {
+ bootCountPowerOnTimeBladeIndex INTEGER,
+ bootCountPowerOnTimeBladeId INTEGER,
+ bootCountPowerOnTimeBoots INTEGER,
+ bootCountPowerOnTimeSecs INTEGER
+ }
+
+ bootCountPowerOnTimeBladeIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade boot count/Power On Time table index."
+ ::= { bladeBootCountPowerOnTimeEntry 1 }
+
+ bootCountPowerOnTimeBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeBootCountPowerOnTimeEntry 2 }
+
+ bootCountPowerOnTimeBoots OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Boot Count. If there is no blade in the
+ given slot then this value is undefined. Writing this
+ value resets the Boot Count to zero."
+ ::= { bladeBootCountPowerOnTimeEntry 3 }
+
+ bootCountPowerOnTimeSecs OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Power On Time in seconds. If there is no blade in
+ the given slot then this value is undefined. Writing this
+ value resets the Power On Time to zero."
+ ::= { bladeBootCountPowerOnTimeEntry 4 }
+
+ bladeVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the virtual LAN ID for the internal management network between the MM and
+ the blade system management processors (BSMPs). The range of valid VLAN ID's
+ is 3 to 4095."
+ ::= { processorBlade 11 }
+
+
+---
+--- Blade Bay Data Table MIB objects
+---
+ bladeBayDataTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeBayDataEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade bay data (BBD) information."
+ ::= { processorBlade 13 }
+
+ bladeBayDataEntry OBJECT-TYPE
+ SYNTAX BladeBayDataEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade bay data (BBD) table entry."
+ INDEX { bayDataIndex }
+ ::= { bladeBayDataTable 1 }
+
+ BladeBayDataEntry ::= SEQUENCE {
+ bayDataIndex INTEGER,
+ bayDataBladeId INTEGER,
+ bayDataBladeExists INTEGER,
+ bayDataBladePowerState INTEGER,
+ bayDataBladeName OCTET STRING,
+ bayData OCTET STRING,
+ bayDataBladeStatus INTEGER
+ }
+
+ bayDataIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade bay data (BBD) table index."
+ ::= { bladeBayDataEntry 1 }
+
+ bayDataBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeBayDataEntry 2 }
+
+ bayDataBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the server blade specified exists or not."
+ ::= { bladeBayDataEntry 3 }
+
+ bayDataBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the power state of the blade specified."
+ ::= { bladeBayDataEntry 4 }
+
+ bayDataBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { bladeBayDataEntry 5 }
+
+
+ bayData OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A null terminated string that defines the Blade Bay Data (BBD). This data
+ is pushed to the blade's BSMP and SMBIOS structures, where it can used
+ by the blade's OS. Up to 60 characters can be defined plus a Null
+ terminator."
+ ::= { bladeBayDataEntry 6 }
+
+ bayDataBladeStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ supported(0),
+ bsmp(1),
+ notPresent(2),
+ discovering(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This shows Blade Bay Data (BBD) status. 0 means the blade fully
+ supports BBD; 1 means that the blade's BIOS does not support BBD;
+ 2 means that there is no blade in the bay; 3 means that the blade is
+ being discovered. 255 means that the blade does not support BBD."
+ ::= { bladeBayDataEntry 7 }
+
+
+ bladeNetworkConfiguration OBJECT IDENTIFIER ::= { processorBlade 12 }
+ -- blade network configuration for all blades
+
+ bladeNetworkInterfaceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeNetworkInterfaceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of all blades' network interfaces."
+ ::= { bladeNetworkConfiguration 2 }
+
+ bladeNetworkInterfaceEntry OBJECT-TYPE
+ SYNTAX BladeNetworkInterfaceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade configuration table entry"
+ INDEX { bladeNetworkInterfaceIndex }
+ ::= { bladeNetworkInterfaceTable 1 }
+
+ BladeNetworkInterfaceEntry ::= SEQUENCE {
+ bladeNetworkInterfaceIndex INTEGER,
+ bladeNetworkInterfaceBayNumber OCTET STRING,
+ bladeNetworkInterfaceNumber INTEGER,
+ bladeNetworkInterfaceType INTEGER,
+ bladeNetworkInterfaceLabel OCTET STRING,
+ bladeNetworkInterfaceIPAddr IpAddress,
+ bladeNetworkInterfaceSubnetMask IpAddress,
+ bladeNetworkInterfaceGatewayAddr IpAddress,
+ bladeNetworkInterfaceVlanId INTEGER,
+ bladeNetworkInterfaceVlanEnable INTEGER,
+ bladeNetworkInterfaceEnable INTEGER,
+ bladeNetworkInterfaceDHCPEnable INTEGER,
+ bladeNetworkInterfaceMACAddr OCTET STRING,
+ bladeNetworkInterfaceAssignedSwitch INTEGER
+ }
+
+ bladeNetworkInterfaceIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Network Interface Table index."
+ ::= { bladeNetworkInterfaceEntry 1 }
+
+ bladeNetworkInterfaceBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The bay number of the main server blade that supports network interface management"
+ ::= { bladeNetworkInterfaceEntry 2 }
+
+ bladeNetworkInterfaceNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates which network interface on the blade System Management Processor is be read or writen"
+ ::= { bladeNetworkInterfaceEntry 3 }
+
+ bladeNetworkInterfaceType OBJECT-TYPE
+ SYNTAX INTEGER {
+ private(1),
+ public(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates blade network interface type."
+ ::= { bladeNetworkInterfaceEntry 4 }
+
+ bladeNetworkInterfaceLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Show string label that identifies the interface."
+ ::= { bladeNetworkInterfaceEntry 5 }
+
+ bladeNetworkInterfaceIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Show/modify current IP address of the blade network interface.
+ Note that only if the bladeNetworkInterfaceEnable is 'enabled(1)' and the bladeNetworkInterfaceDHCPEnable is not 'dhcpEnabled(1)', should the IP address be
+ pushed down to blade System Management Processor"
+ ::= { bladeNetworkInterfaceEntry 6 }
+
+ bladeNetworkInterfaceSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Show or modifie current subnet mask of the blade network interface.
+ Note that only if the bladeNetworkInterfaceEnable is 'enabled(1)' and the bladeNetworkInterfaceDHCPEnable is not 'dhcpEnabled(1)', should the SunnetMask be
+ pushed down to blade System Management Processor"
+ ::= { bladeNetworkInterfaceEntry 7 }
+
+ bladeNetworkInterfaceGatewayAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Show or modify current IP gateway of the blade network interface.
+ Note that only if the bladeNetworkInterfaceEnable is 'enabled(1)' and the bladeNetworkInterfaceDHCPEnable is not 'dhcpEnabled(1)', should the Gateway address be
+ pushed down to blade System Management Processor"
+ ::= { bladeNetworkInterfaceEntry 8 }
+
+ bladeNetworkInterfaceVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This is the Virtual LAN ID for supported network interface cards (NICs).
+ The range of valid VLAN ID's is 0 to 4095."
+ ::= { bladeNetworkInterfaceEntry 9 }
+
+ bladeNetworkInterfaceVlanEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "This object is no longer supported and will always be 0"
+ ::= { bladeNetworkInterfaceEntry 10 }
+
+ bladeNetworkInterfaceEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disabled or enabled the blade network interface. If the network interface is disabled, then ignore other configurations.
+ If this network interface doesn't support enabled/disabled, show 'notApplicable(255)'"
+ ::= { bladeNetworkInterfaceEntry 11 }
+
+ bladeNetworkInterfaceDHCPEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ dhcpDisabled(0),
+ dhcpEnabled(1),
+ tryDhcpThenTryStatic(2),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "IP config method on the blade network interface to modify mode to static IP, dhcp and dhcpthenstatic.
+ If this network interface doesn't support DHCP, show 'notApplicable(255)'"
+ ::= { bladeNetworkInterfaceEntry 12 }
+
+ bladeNetworkInterfaceMACAddr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Show the blade network interface MAC address. If this network interface doesn't support MAC, show 'notApplicable'"
+ ::= { bladeNetworkInterfaceEntry 13 }
+
+ bladeNetworkInterfaceAssignedSwitch OBJECT-TYPE
+ SYNTAX INTEGER { notAssigned(0), module1(1), module2(2), module3(3), module4(4),
+ module5(5), module6(6), module7(7), module8(8), module9(9), module10(10),
+ notApplicable(255)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This field allows you to select an I/O Module to use for
+ management traffic to the blade.
+
+ NOTE: This field is only supported for eth1 of blade.
+ NOTE: You may only specify ethernet switches to this field."
+ ::= { bladeNetworkInterfaceEntry 14 }
+
+
+ bladeIPv6Config OBJECT IDENTIFIER ::= { bladeNetworkConfiguration 10 }
+ bladeIPv6ConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeIPv6ConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table of IPv6 configuration options for blades.
+
+ NOTE: This MIB object is not applicable to blades that
+ do not support IPv6."
+ ::= { bladeIPv6Config 1 }
+
+ bladeIPv6ConfigEntry OBJECT-TYPE
+ SYNTAX BladeIPv6ConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "IPv6 configuration options for a blade.
+
+ NOTE: This MIB object is not applicable to blades that
+ do not support IPv6."
+ INDEX { bladeIPv6ConfigIndex, bladeIPv6ConfigPortIndex }
+ ::= { bladeIPv6ConfigTable 1 }
+
+ BladeIPv6ConfigEntry ::= SEQUENCE {
+ bladeIPv6ConfigIndex INTEGER,
+ bladeIPv6ConfigPortIndex INTEGER,
+ bladeIPv6ConfigEnabled INTEGER,
+ bladeIPv6ConfigStatic INTEGER,
+ bladeDHCPv6ConfigEnabled INTEGER,
+ bladeIPv6ConfigStatelessEnabled INTEGER
+ }
+
+ bladeIPv6ConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade's slot number"
+ ::= { bladeIPv6ConfigEntry 1 }
+ bladeIPv6ConfigPortIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The physical port number of the given entry"
+ ::= { bladeIPv6ConfigEntry 2 }
+ bladeIPv6ConfigEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disable(0),enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables IPv6 support on the blade."
+ ::= { bladeIPv6ConfigEntry 3 }
+ bladeIPv6ConfigStatic OBJECT-TYPE
+ SYNTAX INTEGER { disable(0),enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables IPv6 static configuration support on the blade."
+ ::= { bladeIPv6ConfigEntry 4 }
+ bladeDHCPv6ConfigEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disable(0),enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables DHCPv6 address configuration support on the blade."
+ ::= { bladeIPv6ConfigEntry 5 }
+ bladeIPv6ConfigStatelessEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disable(0),enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables IPv6 stateless auto-configuration support on the blade."
+ ::= { bladeIPv6ConfigEntry 6 }
+
+ bladeIPv6AddressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeIPv6AddressEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table of assigned IPv6 addresses for blades.
+
+ NOTE: This MIB object is not applicable to blades that
+ do not support IPv6."
+ ::= { bladeIPv6Config 2 }
+
+ bladeIPv6AddressEntry OBJECT-TYPE
+ SYNTAX BladeIPv6AddressEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The assigned IPv6 address for a given blade.
+
+ NOTE: This MIB object is not applicable to blades that
+ do not support IPv6."
+ INDEX { bladeIPv6AddressIndex, bladeIPv6AddressPortIndex, bladeIPv6AddressEntryIndex}
+ ::= { bladeIPv6AddressTable 1 }
+
+ BladeIPv6AddressEntry ::= SEQUENCE {
+ bladeIPv6AddressIndex INTEGER,
+ bladeIPv6AddressPortIndex INTEGER,
+ bladeIPv6AddressEntryIndex INTEGER,
+ bladeIPv6AddressType INTEGER,
+ bladeIPv6Address InetAddressIPv6,
+ bladeIPv6AddressPrefixLen INTEGER,
+ bladeIPv6AddressDefaultRoute InetAddressIPv6
+ }
+
+ bladeIPv6AddressIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade's slot number."
+ ::= { bladeIPv6AddressEntry 1 }
+ bladeIPv6AddressPortIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade's physical port number for the given entry."
+ ::= { bladeIPv6AddressEntry 2 }
+ bladeIPv6AddressEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade's address entry index."
+ ::= { bladeIPv6AddressEntry 3 }
+ bladeIPv6AddressType OBJECT-TYPE
+ SYNTAX INTEGER
+ { active-static(1),
+ dhcp6(2),
+ link-local(3),
+ autconfig(4),
+ current(5) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The address type."
+ ::= { bladeIPv6AddressEntry 4 }
+ bladeIPv6Address OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The assigned IPv6 address.
+ Note: 'write' is for static ipv6 only."
+ ::= { bladeIPv6AddressEntry 5 }
+ bladeIPv6AddressPrefixLen OBJECT-TYPE
+ SYNTAX INTEGER (1..128)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The prefix length for the given address.
+ Note: 'write' is for static ipv6 only."
+ ::= { bladeIPv6AddressEntry 6 }
+ bladeIPv6AddressDefaultRoute OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The default route used for the given address.
+ Note: 'write' is for static ipv6 only."
+ ::= { bladeIPv6AddressEntry 7 }
+
+ bladeSPEthOverUSBInterface OBJECT IDENTIFIER ::= { processorBlade 14 }
+
+ spEthOverUSBInterfaceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SPEthOverUSBInterfaceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade Service Processor's Ethernet over USB interface."
+ ::= { bladeSPEthOverUSBInterface 1 }
+
+ spEthOverUSBInterfaceEntry OBJECT-TYPE
+ SYNTAX SPEthOverUSBInterfaceEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade Service Processor's Ethernet over USB interface entry."
+ INDEX { spEthOverUSBInterfaceIndex }
+ ::= { spEthOverUSBInterfaceTable 1 }
+
+ SPEthOverUSBInterfaceEntry ::= SEQUENCE {
+ spEthOverUSBInterfaceIndex INTEGER,
+ spEthOverUSBInterfaceBladeId OCTET STRING,
+ spEthOverUSBInterfaceBladeExists INTEGER,
+ spEthOverUSBInterfaceBladeName OCTET STRING,
+ spEthOverUSBInterfaceEnable INTEGER
+ }
+
+ spEthOverUSBInterfaceIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service Processor's Ethernet over USB interface table index."
+ ::= { spEthOverUSBInterfaceEntry 1 }
+
+ spEthOverUSBInterfaceBladeId OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { spEthOverUSBInterfaceEntry 2 }
+
+ spEthOverUSBInterfaceBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade specified exists or not."
+ ::= { spEthOverUSBInterfaceEntry 3 }
+
+ spEthOverUSBInterfaceBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a null terminated string."
+ ::= { spEthOverUSBInterfaceEntry 6 }
+
+ spEthOverUSBInterfaceEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1),
+ notApplicable(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object allows the user to view the status of, and enable
+ or disable, a blade Service Processor's command interface on
+ Ethernet-over-USB.
+
+ NOTE: If the blade either does not exist or does not support
+ Ethernet-over-USB command interface. It displays 'notApplicable'.
+ NOTE: It will take about 10 or more seconds for the disable/enable
+ setting to take effect."
+ ::= { spEthOverUSBInterfaceEntry 9 }
+
+ -- Blade management network auto discovery
+
+ bladeManagementNetwork OBJECT IDENTIFIER ::= { processorBlade 15 }
+
+ bladeManagementNetworkControlEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Globally disable/enable blade management network auto discovery support."
+ ::= { bladeManagementNetwork 1 }
+
+ --Blade Management Network Info Table
+
+ bladeManagementNetworkInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeManagementNetworkInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade management network information."
+ ::= { bladeManagementNetwork 2 }
+
+ bladeManagementNetworkInfoEntry OBJECT-TYPE
+ SYNTAX BladeManagementNetworkInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management network information entry."
+ INDEX { bladeManagementNetworkInfoIndex }
+ ::= { bladeManagementNetworkInfoTable 1 }
+
+ BladeManagementNetworkInfoEntry ::= SEQUENCE {
+ bladeManagementNetworkInfoIndex INTEGER,
+ bladeManagementNetworkInfoBladeId INTEGER,
+ bladeManagementNetworkInfoBladeExist INTEGER,
+ bladeManagementNetworkInfoBladeSupport INTEGER,
+ bladeManagementNetworkInfoPathStatus INTEGER,
+ bladeManagementNetworkInfoBladeIPAddr IpAddress,
+ bladeManagementNetworkInfoBladeMACAddr OCTET STRING,
+ bladeManagementNetworkInfoSwitchId INTEGER
+ }
+
+ bladeManagementNetworkInfoIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade management network information table index"
+ ::= { bladeManagementNetworkInfoEntry 1 }
+
+ bladeManagementNetworkInfoBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Blade ID."
+ ::= { bladeManagementNetworkInfoEntry 2 }
+
+ bladeManagementNetworkInfoBladeExist OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade specified exists or not in the chassis."
+ ::= { bladeManagementNetworkInfoEntry 3 }
+
+ bladeManagementNetworkInfoBladeSupport OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade supports the management network auto discovery capability or not."
+ ::= { bladeManagementNetworkInfoEntry 4 }
+
+ bladeManagementNetworkInfoPathStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the status of the management network for this blade."
+ ::= { bladeManagementNetworkInfoEntry 5 }
+
+ bladeManagementNetworkInfoBladeIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the blade system management processor IPv4 address."
+ ::= { bladeManagementNetworkInfoEntry 6 }
+
+ bladeManagementNetworkInfoBladeMACAddr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates the blade system management processor MAC address."
+ ::= { bladeManagementNetworkInfoEntry 7 }
+
+ bladeManagementNetworkInfoSwitchId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates which switch is selected for the blade management network."
+ ::= { bladeManagementNetworkInfoEntry 8 }
+
+ -- ********************************************************************************
+ -- Switch module control and config
+ -- ********************************************************************************
+ switchModule OBJECT IDENTIFIER ::= { blades 3 }
+ -- Server blade switch module control and configuration
+
+ -- ********************************************************************************
+ -- Switch module control
+ -- ********************************************************************************
+ switchModuleControl OBJECT IDENTIFIER ::= { switchModule 1 }
+ -- Server blade switch module control
+
+ smControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmControlEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module control table."
+ ::= { switchModuleControl 1 }
+
+ smControlEntry OBJECT-TYPE
+ SYNTAX SmControlEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module control table entry"
+ INDEX { smControlIndex }
+ ::= { smControlTable 1 }
+
+ SmControlEntry ::= SEQUENCE {
+ smControlIndex INTEGER,
+ switchModuleControlId INTEGER,
+ smPostResultsAvailable INTEGER,
+ smPostResultsValue OCTET STRING,
+ switchModuleMemDiagEnableDisable INTEGER,
+ smCfgCtrlEnableDisable INTEGER,
+ smExtEthPortsEnableDisable INTEGER,
+ switchPingRequest INTEGER,
+ smCfgCtrlOnResetEnableDisable INTEGER,
+ smHealthState INTEGER,
+ smPMState INTEGER,
+ smPMCtrlEnableDisable INTEGER,
+ smIOCompatibility OCTET STRING
+ }
+
+ smControlIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module control table index."
+ ::= { smControlEntry 1 }
+
+ switchModuleControlId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module numeric identifier."
+ ::= { smControlEntry 2 }
+
+ smPostResultsAvailable OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Describes whether the switch module POST diagnostic result
+ value contained in the smPostResultsValue is valid."
+ ::= { smControlEntry 3 }
+
+ smPostResultsValue OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The range of values and meanings are as follows:
+ 0x00 - 0x7F ( 0 - 127) Base internal functions
+ 0x80 - 0x9F (128 - 159) Internal interface failures
+ 0xA0 - 0xAF (160 - 175) External interface failures
+ 0xB0 - 0xFE (176 - 254) Reserved
+ 0xFF (255) Switch completed POST successfully"
+ ::= { smControlEntry 4 }
+
+ switchModuleMemDiagEnableDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(0),
+ disabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module memory diagnostics enabled or disabled.
+
+ NOTE: The numeric values for the enumerations for enabled and disabled are non-traditional
+ (i.e. - 0 and 1 are swapped), however, they cannot be changed since this MIB is already
+ published. "
+ ::= { smControlEntry 5 }
+
+ smCfgCtrlEnableDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module configuration control. When set to enabled, only the MM can manage
+ the module.
+ This MIB object can not be set, if AMM grants switch module the Protected Mode permission.
+ This MIB object can not be set, if the switch module is participating in the Stacking Mode
+ and external management is protected.
+
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode. A value of disabled(0) will be returned."
+ ::= { smControlEntry 6 }
+
+ smExtEthPortsEnableDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module external ethernet ports enabled or disabled.
+ This MIB object can not be set, if AMM grants switch module the
+ Protected Mode permission.
+ This MIB object can not be set, if the switch module is participating
+ in the Stacking Mode and External Port Access is protected."
+ ::= { smControlEntry 7 }
+
+ switchPingRequest OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Sends a ping to a switch module's current IPv4 address.
+ This MIB object can not be set, if AMM grants switch module the Protected Mode
+ permission and switch module goes into Protected Mode.
+ This MIB object can not be set, if the switch module is participating
+ in the Stacking Mode and IP Configuration is protected.
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object.
+
+ NOTE: This object has been deprecated in favor of the new
+ table smPingTable which supports IPv6 and IPv4 addresses."
+ ::= { smControlEntry 8 }
+
+ smCfgCtrlOnResetEnableDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(0),
+ disabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module configuration control on resets (default and unsolicited).
+ When set to enabled, the factory default IP configuration will become
+ active when the I/O module is reset to factory defaults by either the
+ management module or the I/O module. If an I/O module reset is initiated
+ by a source other than the management module then the previous IP configuration
+ will be in affect. In both these cases the MM will lose IP communications with
+ the IOM.
+ This MIB object can not be set, if AMM grants switch module the Protected Mode
+ permission and switch module goes into Protected Mode.
+
+ NOTE: The numeric values for the enumerations for enabled and disabled are non-traditional
+ (i.e. - 0 and 1 are swapped), however, they cannot be changed since this MIB is already
+ published.
+
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode. A value of disabled(1) will be returned."
+ ::= { smControlEntry 9 }
+
+ smHealthState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ bad(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the switch module.
+ 0 = unknown, 1 = good, 2 = warning, 3 = bad."
+ ::= { smControlEntry 15}
+
+ smPMState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ pending(1),
+ attention(2),
+ active(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Protected Mode Status for the switch module.
+ standby- Protected Mode capability exists on the IOM but has not
+ been activated on the switch module or the AMM.
+ pending - Protected Mode has been activated on the AMM but not yet on the switch module.
+ active - Protected Mode is active on both the switch module and the AMM.
+ attention - Protected Mode is enabled on the switch module but not on the AMM."
+ ::= { smControlEntry 16}
+
+ smPMCtrlEnableDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "AMM Protected Mode permission for the switch module.
+ disabled - allow AMM to disable Protected Mode Permission for the switch module.
+ enabled - allow AMM to grant Protected Mode Permission for the switch module."
+ ::= { smControlEntry 17}
+
+ smIOCompatibility OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The compatibility status for the I/O module.
+
+ The possible values and their meanings are as follows:
+ Unknown: This indicates a communication error for the I/O module.
+ OK: This is the normal (good) case where there are no compatibility
+ issues between the I/O module and the modules it is internally wired to.
+ No Fabric: This means the other end is not populated on any of the
+ modules this I/O module is internally wired to (e.g. this is an
+ Infiniband switch but none of the blades it is internally wired to
+ has an expansion card attached in the corresponding expansion slot).
+ Attention: Indicates one of the following cases:
+ One or more of the modules this I/O module is internally wired to is in communication error
+ The I/O module is powered off and at least one module it is internally wired to is powered on
+ Mismatch: Indicates one of the following cases:
+ Fabric types are incompatible
+ An unknown I/O module type
+ An unknown fabric type on a module the I/O module is internally wired to."
+ ::= { smControlEntry 18}
+
+ smPingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmPingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Allows pinging one of the active assigned addresses of an I/O module.
+
+ NOTE: This table is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { switchModuleControl 2 }
+
+ smPingEntry OBJECT-TYPE
+ SYNTAX SmPingEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Represents a single address that can be pinged"
+ INDEX { smPingIndex, smPingAddressEntryIndex }
+ ::= { smPingTable 1 }
+
+ SmPingEntry ::= SEQUENCE {
+ smPingIndex INTEGER,
+ smPingAddressEntryIndex INTEGER,
+ smPingAddress OCTET STRING,
+ smPingAddressExecute INTEGER
+ }
+
+ smPingIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module's slot number"
+ ::= { smPingEntry 1 }
+ smPingAddressEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module's address entry index"
+ ::= { smPingEntry 2 }
+ smPingAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module's IPv4 or IPv6 address"
+ ::= { smPingEntry 3 }
+ smPingAddressExecute OBJECT-TYPE
+ SYNTAX INTEGER { execute(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Pings the given IP address.
+
+ NOTE: The GET operation for this object is meaningless."
+ ::= { smPingEntry 4 }
+
+ smPowerRestartTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmPowerRestartEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module power restart table."
+ ::= { switchModuleControl 7 }
+
+ smPowerRestartEntry OBJECT-TYPE
+ SYNTAX SmPowerRestartEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module power restart table entry"
+ INDEX { smPowerRestartIndex }
+ ::= { smPowerRestartTable 1 }
+
+ SmPowerRestartEntry ::= SEQUENCE {
+ smPowerRestartIndex INTEGER,
+ smPowerRestartId INTEGER,
+ smSwitchExists INTEGER,
+ smSwitchType INTEGER,
+ smMACAddress OCTET STRING,
+ smIPAddress IpAddress,
+ switchModulePowerOnOff INTEGER,
+ smReset INTEGER,
+ smResetToDefault INTEGER,
+ smRestartAndRunStdDiag INTEGER,
+ smRestartAndRunExtDiag INTEGER,
+ smRestartAndRunFullDiag INTEGER,
+ smSwitchSubType INTEGER,
+ smSwitchWidth INTEGER,
+ smManufacturingID OCTET STRING,
+ smStackingModeState INTEGER,
+ smStackingModeInfo OCTET STRING
+ }
+
+ smPowerRestartIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module power restart index."
+ ::= { smPowerRestartEntry 1 }
+
+ smPowerRestartId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module numeric identifier."
+ ::= { smPowerRestartEntry 2 }
+
+ smSwitchExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module specified exists or not."
+ ::= { smPowerRestartEntry 3 }
+
+ smSwitchType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ethernet(1),
+ fibre(2),
+ opm(3),
+ serialCM(4),
+ copperPassThrough(5),
+ infiniband(6),
+ highSpeed(20),
+ passThrough(30),
+ sas(40)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module type."
+ ::= { smPowerRestartEntry 4 }
+
+ smMACAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module MAC address."
+ ::= { smPowerRestartEntry 5 }
+
+ smIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module current IP address.
+ If the switch module is participating in the Stacking Mode
+ and IP Configuration is protected, then the stack management
+ IP address is displayed.
+
+ NOTE: IPv6 addresses for the switch can be view with the
+ smIPv6AddressTable."
+ ::= { smPowerRestartEntry 6 }
+
+ switchModulePowerOnOff OBJECT-TYPE
+ SYNTAX INTEGER {
+ poweroff(0),
+ poweron(1),
+ shutdownInProgress(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "I/O Module power on or power off. If powering on a currently
+ powered off I/O Module, then the I/O Module will execute a POST.
+ The results of this POST will need to be retrieved using the 'Post Results'
+ command.
+ NOTE:
+ When powering off a currently powered on I/O Module, a minimum of 1 second
+ is needed to allow the module to power off before powering back on.
+ The value 'shutdownInProgress' is for I/O Modules that may take some time to
+ transition from 'poweron' to 'poweroff'. For example, SAS Controller Modules must
+ flush pending I/O before powering off in order to maintain data integrity.
+ The value'shutdownInProgress' can not be used to set.
+ If both SAS Controller Module and SAS Connectivity Module are installed in slot 3
+ and 4 of BCS chassis, AMM must prevent one of them from powering on otherwise
+ there would be conflict with the Storage Module access and possibly corruption of data.
+ This MIB object can not be set, if AMM grants the I/O Module the Protected Mode
+ permission and module goes into Protected Mode."
+ ::= { smPowerRestartEntry 7 }
+
+ smReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "For the case where the switch module is currently powered on, this command
+ will effectively power off and then power on the switch module indicated and
+ cause it to run its POST test. For the case where the switch module is
+ currently powered off, the command will just power on the switch module.
+ This MIB object can not be set, if AMM grants switch module the Protected Mode
+ permission and switch module goes into Protected Mode.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { smPowerRestartEntry 8 }
+
+ smResetToDefault OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "For the case where the switch module is currently powered on, this command
+ will effectively power off and then power on the switch module indicated and
+ cause it to run its POST test. For the case where the switch module is
+ currently powered off, the command will just power on the switch module.
+ In both cases, the switch module will reset the configuration to the default
+ values.
+ This MIB object can not be set, if AMM grants switch module the Protected Mode
+ permission and switch module goes into Protected Mode.
+ This MIB object can not be set, if the switch module is participating in the
+ Stacking Mode and reset to default is protected.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { smPowerRestartEntry 9 }
+
+ smRestartAndRunStdDiag OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "To power cycle the selected module(s) and then run the standard diagnostic
+ test package.
+
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { smPowerRestartEntry 10 }
+
+ smRestartAndRunExtDiag OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "To power cycle the selected module(s) and then run the extended diagnostic
+ test package. This option is not supported on all I/O modules.
+
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { smPowerRestartEntry 11 }
+
+ smRestartAndRunFullDiag OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "To power cycle the selected module(s) and then run the full diagnostic test
+ package. The full diagnostic test package may take over 5 minutes to run.
+ This option is not supported on all I/O modules.
+
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { smPowerRestartEntry 12 }
+
+ smSwitchSubType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ ethernet(1),
+ fibre(2),
+ infiniband(6),
+ sas(7),
+ raidsas(8),
+ icpm(9)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module subtype.
+ NOTE: Some Legacy modules do not support a subtype and will be displayed as unknown."
+ ::= { smPowerRestartEntry 20 }
+
+ smSwitchWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module width."
+ ::= { smPowerRestartEntry 21 }
+
+ smManufacturingID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module hardware VPD manufacturing ID."
+ ::= { smPowerRestartEntry 22 }
+
+ smStackingModeState OBJECT-TYPE
+ SYNTAX INTEGER {
+ standby(0),
+ member(1),
+ master(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Stacking Mode Status for the switch module.
+ standby - I/O module has stacking capability but is not part of a stack.
+ member - I/O module has stacking capability and is part of a stack in the
+ member role.
+ master - I/O module has stacking capability and is part of a stack in the
+ master role.
+ NOTE: The term disabled was changed to the term standby to be more descriptive."
+ ::= { smPowerRestartEntry 23 }
+
+ smStackingModeInfo OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string containing a text description about the details of which functions are
+ protected for a switch module when it is in Stacking Mode as Master or Member.
+ The possible functions protected by switch modules are IP configuration,
+ External Port Access, External Management all over ports and Restore to defaults."
+ ::= { smPowerRestartEntry 24 }
+
+ smIOCompatibilityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmIOCompatibilityEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module control table."
+ ::= { switchModuleControl 10 }
+
+ smIOCompatibilityEntry OBJECT-TYPE
+ SYNTAX SmIOCompatibilityEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module IO compatibility table entry"
+ INDEX { smIOCompatibilityIndex }
+ ::= { smIOCompatibilityTable 1 }
+
+ SmIOCompatibilityEntry ::= SEQUENCE {
+ smIOCompatibilityIndex INTEGER,
+ smIOCompatibilityId INTEGER,
+ smIOCompatibilityModuleBay OCTET STRING,
+ smIOCompatibilityModulePower OCTET STRING,
+ smIOCompatibilityModuleFabricType OCTET STRING,
+ smIOCompatibilityStatus OCTET STRING
+ }
+
+ smIOCompatibilityIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module IO compatibility index."
+ ::= { smIOCompatibilityEntry 1 }
+
+ smIOCompatibilityId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module numeric identifier."
+ ::= { smIOCompatibilityEntry 2 }
+
+ smIOCompatibilityModuleBay OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The modules (each one specified by module type and bay number) that
+ this I/O module can communicate with over the midplane networking fabric
+ (i.e. a physical path exists between the I/O module and this module)."
+ ::= { smIOCompatibilityEntry 3 }
+
+ smIOCompatibilityModulePower OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power state of the module specified in smIOCompatibilityModuleBay."
+ ::= { smIOCompatibilityEntry 4 }
+
+ smIOCompatibilityModuleFabricType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The I/O fabric type on the module side for the module.
+ 'n/a' will be displayed if the corresponding channel is not populated
+ on the module side (e.g. we are looking at the details for an Infiniband
+ switch but the blade does not have an Infiniband expansion card attached
+ in the corresponding expansion slot)."
+ ::= { smIOCompatibilityEntry 5 }
+
+ smIOCompatibilityStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The compatibility status for this I/O module and the module specified
+ in smIOCompatibilityModuleBay.
+
+ The possible values are:
+ OK: No compatibility issues
+ n/a: Indicates the corresponding channel is not populated on the module
+ side even though the module is present (e.g. we are looking at the details
+ for an Infiniband switch but the blade specified in smIOCompatibilityModuleBay
+ does not have an Infiniband expansion card attached in the corresponding expansion slot).
+ Attention: Indicates one of the following:
+ The module specified in smIOCompatibilityModuleBay has a communication error.
+ The I/O module is powered off but the module specified in smIOCompatibilityModuleBay is powered on.
+ Mismatch: Indicates one of the following cases::
+ Fabric types are incompatible
+ Unknown fabric type on the module side
+ Unknown I/O module type"
+ ::= { smIOCompatibilityEntry 6 }
+
+ -- ********************************************************************************
+ -- Switch module config
+ -- ********************************************************************************
+ switchModuleConfig OBJECT IDENTIFIER ::= { switchModule 2 }
+ -- Server blade switch module configuration
+
+ switchMgmtNetworkCfg OBJECT IDENTIFIER ::= { switchModuleConfig 1 }
+ -- Server blade switch module management network config
+
+ --
+ -- Current switch module network config
+ --
+ switchCurrentNwCfg OBJECT IDENTIFIER ::= { switchMgmtNetworkCfg 1 }
+ -- Server blade switch module current network config
+
+ smCurrentIPInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmCurrentIPInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module current IP information.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { switchCurrentNwCfg 1 }
+
+ smCurrentIPInfoEntry OBJECT-TYPE
+ SYNTAX SmCurrentIPInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module current IP table entry.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ INDEX { smCurrentIPInfoIndex }
+ ::= { smCurrentIPInfoTable 1 }
+
+ SmCurrentIPInfoEntry ::= SEQUENCE {
+ smCurrentIPInfoIndex INTEGER,
+ smCurrentIPInfoId INTEGER,
+ smCurrentIPInfoExists INTEGER,
+ smCurrentIPInfoPowerState INTEGER,
+ smCurrentIPAddr IpAddress,
+ smCurrentSubnetMask IpAddress,
+ smCurrentGateway IpAddress,
+ smCurrentIPConfigMethod INTEGER
+ }
+
+ smCurrentIPInfoIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module current IP info index.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { smCurrentIPInfoEntry 1 }
+
+ smCurrentIPInfoId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module numeric identifier.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { smCurrentIPInfoEntry 2 }
+
+ smCurrentIPInfoExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module specified exists or not.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { smCurrentIPInfoEntry 3 }
+
+ smCurrentIPInfoPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ shutdownInProgress(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the I/O Module specified is powered on or not.
+ The value 'shutdownInProgress' is for the I/O Module that may take some time to
+ transition from 'poweron' to 'poweroff'. Such as SAS Controller Modules, that must
+ flush pending I/O before powering off in order to maintain data integrity.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { smCurrentIPInfoEntry 4 }
+
+ smCurrentIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module current IP address.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { smCurrentIPInfoEntry 6 }
+
+
+ smCurrentSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module current subnet mask.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { smCurrentIPInfoEntry 7 }
+
+ smCurrentGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module current IP gateway.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { smCurrentIPInfoEntry 8 }
+
+ smCurrentIPConfigMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ static(1),
+ dhcp(2),
+ nat (3),
+ bootp(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module current IP configuration method.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected."
+ ::= { smCurrentIPInfoEntry 9 }
+
+
+ -- ********************************************************************************
+ -- New switch module network config
+ -- ********************************************************************************
+ switchNewNwCfg OBJECT IDENTIFIER ::= { switchMgmtNetworkCfg 2 }
+ -- Server blade switch module new network config
+
+ smNewIPInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNewIPInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module new IP information.
+
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
+ ::= { switchNewNwCfg 1 }
+
+ smNewIPInfoEntry OBJECT-TYPE
+ SYNTAX SmNewIPInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module new IP configuration information table entry.
+
+ NOTE: This MIB table is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
+ INDEX { smNewIPInfoIndex }
+ ::= { smNewIPInfoTable 1 }
+
+ SmNewIPInfoEntry ::= SEQUENCE {
+ smNewIPInfoIndex INTEGER,
+ smNewIPInfoId INTEGER,
+ smNewIPInfoExists INTEGER,
+ smNewIPInfoPowerState INTEGER,
+ smNewIPAddr IpAddress,
+ smNewSubnetMask IpAddress,
+ smNewGateway IpAddress,
+ smNewIPConfigMethod INTEGER,
+ smNewIPConfigEnableDisable INTEGER
+ }
+
+ smNewIPInfoIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module new IP info index.
+
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
+ ::= { smNewIPInfoEntry 1 }
+
+ smNewIPInfoId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module numeric identifier.
+
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
+ ::= { smNewIPInfoEntry 2 }
+
+ smNewIPInfoExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module specified exists or not.
+
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode or Stacking Mode and IP configuration is protected."
+ ::= { smNewIPInfoEntry 3 }
+
+ smNewIPInfoPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module specified is powered on or not.
+
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode or Stacking Mode and IP configuration is protected.."
+ ::= { smNewIPInfoEntry 4 }
+
+ smNewIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module new IP address. Before setting this object to a new value,
+ smNewIpconfigEnableDisable object must first be set to disabled.
+ NOTE: This MIB object can not be set if the AMM grants the switch module Protected Mode
+ permission and the switch module goes into Protected Mode.
+ NOTE: This MIB object can not be set if the switch module is in Stacking Mode
+ and IP Configuration is protected.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { smNewIPInfoEntry 6 }
+
+
+ smNewSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module new subnet mask. Before setting this object to a new value,
+ smNewIpconfigEnableDisable object must first be set to disabled.
+ NOTE: This MIB object can not be set if the AMM grants the switch module Protected Mode
+ permission and the switch module goes into Protected Mode.
+ NOTE: This MIB object can not be set if the switch module is in Stacking Mode,
+ and IP Configuration is protected.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { smNewIPInfoEntry 7 }
+
+ smNewGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module new IP gateway. Before setting this object to a new value,
+ smNewIpconfigEnableDisable object must first be set to disabled.
+ NOTE: This MIB object can not be set if the AMM grants the switch module Protected Mode
+ permission and the switch module goes into Protected Mode.
+ NOTE: This MIB object can not be set if the switch module is in Stacking Mode,
+ and IP Configuration is protected.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { smNewIPInfoEntry 8 }
+
+ smNewIPConfigMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ static(1),
+ dhcp(2),
+ nat(3),
+ bootp(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module new IP configuration method. Before setting this object to a new value,
+ smNewIpconfigEnableDisable object must first be set to disabled.
+ NOTE: This MIB object can not be set if the AMM grants the switch module Protected Mode
+ permission and the switch module goes into Protected Mode.
+ NOTE: This MIB object can not be set if the switch module is in Stacking Mode,
+ and IP Configuration is protected.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { smNewIPInfoEntry 9 }
+
+ smNewIPConfigEnableDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A set command enables a new IP configuration that has been
+ previously defined. A get command indicates whether the new
+ IP configuration information has been enabled.
+ NOTE: This MIB object can not be set if the AMM grants the switch module Protected Mode
+ permission and the switch module goes into Protected Mode.
+ NOTE: This MIB object can not be set if the switch module is in Stacking Mode,
+ and IP Configuration is protected.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { smNewIPInfoEntry 10 }
+
+ -- ********************************************************************************
+ -- Network protocol (Network Address Translation) config
+ -- ********************************************************************************
+ switchNwProtCfg OBJECT IDENTIFIER ::= { switchMgmtNetworkCfg 3 }
+
+ switchNwProtCfgModOne OBJECT IDENTIFIER ::= { switchNwProtCfg 1 }
+
+ smNwProtInfoModOneTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModOneEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 1 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModOne 1 }
+
+ smNwProtInfoModOneEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModOneEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 1 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModOneIndex }
+ ::= { smNwProtInfoModOneTable 1 }
+
+ SmNwProtInfoModOneEntry ::= SEQUENCE {
+ smNwProtInfoModOneIndex INTEGER,
+ smNwProtInfoModOneId INTEGER,
+ smNwProtInfoModOneExists INTEGER,
+ smNwProtInfoModOnePowerState INTEGER,
+ smNwProtInfoModOneProtName OCTET STRING,
+ smNwProtInfoModOneProtID INTEGER,
+ smNwProtInfoModOneExtPort INTEGER,
+ smNwProtInfoModOneIntPort INTEGER,
+ smNwProtInfoModOneEnable INTEGER
+ }
+
+ smNwProtInfoModOneIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 1 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModOneEntry 1 }
+
+ smNwProtInfoModOneId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 1 numeric identifier."
+ ::= { smNwProtInfoModOneEntry 2 }
+
+ smNwProtInfoModOneExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 1 exists or not."
+ ::= { smNwProtInfoModOneEntry 3 }
+
+ smNwProtInfoModOnePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 1 is powered on or not."
+ ::= { smNwProtInfoModOneEntry 4 }
+
+ smNwProtInfoModOneProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModOneEntry 5 }
+
+ smNwProtInfoModOneProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ -- ip(1),
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModOneEntry 6 }
+
+ smNwProtInfoModOneExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModOneEntry 7 }
+
+ smNwProtInfoModOneIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModOneEntry 8 }
+
+ smNwProtInfoModOneEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModOneEntry 9 }
+
+ smNwProtInfoModOneActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModOne 2 }
+
+ smNwProtInfoModOneReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModOne 3 }
+
+
+ switchNwProtCfgModTwo OBJECT IDENTIFIER ::= { switchNwProtCfg 2 }
+
+ smNwProtInfoModTwoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModTwoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 2 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModTwo 1 }
+
+ smNwProtInfoModTwoEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModTwoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 2 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModTwoIndex }
+ ::= { smNwProtInfoModTwoTable 1 }
+
+ SmNwProtInfoModTwoEntry ::= SEQUENCE {
+ smNwProtInfoModTwoIndex INTEGER,
+ smNwProtInfoModTwoId INTEGER,
+ smNwProtInfoModTwoExists INTEGER,
+ smNwProtInfoModTwoPowerState INTEGER,
+ smNwProtInfoModTwoProtName OCTET STRING,
+ smNwProtInfoModTwoProtID INTEGER,
+ smNwProtInfoModTwoExtPort INTEGER,
+ smNwProtInfoModTwoIntPort INTEGER,
+ smNwProtInfoModTwoEnable INTEGER
+ }
+
+ smNwProtInfoModTwoIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 2 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModTwoEntry 1 }
+
+ smNwProtInfoModTwoId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 2 numeric identifier."
+ ::= { smNwProtInfoModTwoEntry 2 }
+
+ smNwProtInfoModTwoExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 2 exists or not."
+ ::= { smNwProtInfoModTwoEntry 3 }
+
+ smNwProtInfoModTwoPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 2 is powered on or not."
+ ::= { smNwProtInfoModTwoEntry 4 }
+
+ smNwProtInfoModTwoProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModTwoEntry 5 }
+
+ smNwProtInfoModTwoProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModTwoEntry 6 }
+
+ smNwProtInfoModTwoExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModTwoEntry 7 }
+
+ smNwProtInfoModTwoIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModTwoEntry 8 }
+
+ smNwProtInfoModTwoEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModTwoEntry 9 }
+
+ smNwProtInfoModTwoActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModTwo 2 }
+
+ smNwProtInfoModTwoReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModTwo 3 }
+
+
+ switchNwProtCfgModThree OBJECT IDENTIFIER ::= { switchNwProtCfg 3 }
+
+ smNwProtInfoModThreeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModThreeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 3 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModThree 1 }
+
+ smNwProtInfoModThreeEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModThreeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 3 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModThreeIndex }
+ ::= { smNwProtInfoModThreeTable 1 }
+
+ SmNwProtInfoModThreeEntry ::= SEQUENCE {
+ smNwProtInfoModThreeIndex INTEGER,
+ smNwProtInfoModThreeId INTEGER,
+ smNwProtInfoModThreeExists INTEGER,
+ smNwProtInfoModThreePowerState INTEGER,
+ smNwProtInfoModThreeProtName OCTET STRING,
+ smNwProtInfoModThreeProtID INTEGER,
+ smNwProtInfoModThreeExtPort INTEGER,
+ smNwProtInfoModThreeIntPort INTEGER,
+ smNwProtInfoModThreeEnable INTEGER
+ }
+
+ smNwProtInfoModThreeIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 3 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModThreeEntry 1 }
+
+ smNwProtInfoModThreeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 3 numeric identifier."
+ ::= { smNwProtInfoModThreeEntry 2 }
+
+ smNwProtInfoModThreeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 3 exists or not."
+ ::= { smNwProtInfoModThreeEntry 3 }
+
+ smNwProtInfoModThreePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 3 is powered on or not."
+ ::= { smNwProtInfoModThreeEntry 4 }
+
+ smNwProtInfoModThreeProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModThreeEntry 5 }
+
+ smNwProtInfoModThreeProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModThreeEntry 6 }
+
+ smNwProtInfoModThreeExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModThreeEntry 7 }
+
+ smNwProtInfoModThreeIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModThreeEntry 8 }
+
+ smNwProtInfoModThreeEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModThreeEntry 9 }
+
+ smNwProtInfoModThreeActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModThree 2 }
+
+ smNwProtInfoModThreeReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModThree 3 }
+
+
+ switchNwProtCfgModFour OBJECT IDENTIFIER ::= { switchNwProtCfg 4 }
+
+ smNwProtInfoModFourTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModFourEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 4 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModFour 1 }
+
+ smNwProtInfoModFourEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModFourEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 3 network protocol (Network Address Translation) configuration
+ information table entry."
+ INDEX { smNwProtInfoModFourIndex }
+ ::= { smNwProtInfoModFourTable 1 }
+
+ SmNwProtInfoModFourEntry ::= SEQUENCE {
+ smNwProtInfoModFourIndex INTEGER,
+ smNwProtInfoModFourId INTEGER,
+ smNwProtInfoModFourExists INTEGER,
+ smNwProtInfoModFourPowerState INTEGER,
+ smNwProtInfoModFourProtName OCTET STRING,
+ smNwProtInfoModFourProtID INTEGER,
+ smNwProtInfoModFourExtPort INTEGER,
+ smNwProtInfoModFourIntPort INTEGER,
+ smNwProtInfoModFourEnable INTEGER
+ }
+
+ smNwProtInfoModFourIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 4 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModFourEntry 1 }
+
+ smNwProtInfoModFourId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 4 numeric identifier."
+ ::= { smNwProtInfoModFourEntry 2 }
+
+ smNwProtInfoModFourExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 4 exists or not."
+ ::= { smNwProtInfoModFourEntry 3 }
+
+ smNwProtInfoModFourPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 4 is powered on or not."
+ ::= { smNwProtInfoModFourEntry 4 }
+
+ smNwProtInfoModFourProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModFourEntry 5 }
+
+ smNwProtInfoModFourProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModFourEntry 6 }
+
+ smNwProtInfoModFourExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModFourEntry 7 }
+
+ smNwProtInfoModFourIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModFourEntry 8 }
+
+ smNwProtInfoModFourEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModFourEntry 9 }
+
+ smNwProtInfoModFourActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModFour 2 }
+
+ smNwProtInfoModFourReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModFour 3 }
+
+ switchNwProtCfgModFive OBJECT IDENTIFIER ::= { switchNwProtCfg 5 }
+
+ smNwProtInfoModFiveTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModFiveEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 5 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModFive 1 }
+
+ smNwProtInfoModFiveEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModFiveEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 5 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModFiveIndex }
+ ::= { smNwProtInfoModFiveTable 1 }
+
+ SmNwProtInfoModFiveEntry ::= SEQUENCE {
+ smNwProtInfoModFiveIndex INTEGER,
+ smNwProtInfoModFiveId INTEGER,
+ smNwProtInfoModFiveExists INTEGER,
+ smNwProtInfoModFivePowerState INTEGER,
+ smNwProtInfoModFiveProtName OCTET STRING,
+ smNwProtInfoModFiveProtID INTEGER,
+ smNwProtInfoModFiveExtPort INTEGER,
+ smNwProtInfoModFiveIntPort INTEGER,
+ smNwProtInfoModFiveEnable INTEGER
+ }
+
+ smNwProtInfoModFiveIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 5 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModFiveEntry 1 }
+
+ smNwProtInfoModFiveId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 5 numeric identifier."
+ ::= { smNwProtInfoModFiveEntry 2 }
+
+ smNwProtInfoModFiveExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 5 exists or not."
+ ::= { smNwProtInfoModFiveEntry 3 }
+
+ smNwProtInfoModFivePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 5 is powered on or not."
+ ::= { smNwProtInfoModFiveEntry 4 }
+
+ smNwProtInfoModFiveProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModFiveEntry 5 }
+
+ smNwProtInfoModFiveProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModFiveEntry 6 }
+
+ smNwProtInfoModFiveExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModFiveEntry 7 }
+
+ smNwProtInfoModFiveIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModFiveEntry 8 }
+
+ smNwProtInfoModFiveEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModFiveEntry 9 }
+
+ smNwProtInfoModFiveActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModFive 2 }
+
+ smNwProtInfoModFiveReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModFive 3 }
+
+
+ switchNwProtCfgModSix OBJECT IDENTIFIER ::= { switchNwProtCfg 6 }
+
+ smNwProtInfoModSixTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModSixEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 6 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModSix 1 }
+
+ smNwProtInfoModSixEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModSixEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 6 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModSixIndex }
+ ::= { smNwProtInfoModSixTable 1 }
+
+ SmNwProtInfoModSixEntry ::= SEQUENCE {
+ smNwProtInfoModSixIndex INTEGER,
+ smNwProtInfoModSixId INTEGER,
+ smNwProtInfoModSixExists INTEGER,
+ smNwProtInfoModSixPowerState INTEGER,
+ smNwProtInfoModSixProtName OCTET STRING,
+ smNwProtInfoModSixProtID INTEGER,
+ smNwProtInfoModSixExtPort INTEGER,
+ smNwProtInfoModSixIntPort INTEGER,
+ smNwProtInfoModSixEnable INTEGER
+ }
+
+ smNwProtInfoModSixIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 6 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModSixEntry 1 }
+
+ smNwProtInfoModSixId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 6 numeric identifier."
+ ::= { smNwProtInfoModSixEntry 2 }
+
+ smNwProtInfoModSixExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 6 exists or not."
+ ::= { smNwProtInfoModSixEntry 3 }
+
+ smNwProtInfoModSixPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 6 is powered on or not."
+ ::= { smNwProtInfoModSixEntry 4 }
+
+ smNwProtInfoModSixProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModSixEntry 5 }
+
+ smNwProtInfoModSixProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModSixEntry 6 }
+
+ smNwProtInfoModSixExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModSixEntry 7 }
+
+ smNwProtInfoModSixIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModSixEntry 8 }
+
+ smNwProtInfoModSixEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModSixEntry 9 }
+
+ smNwProtInfoModSixActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModSix 2 }
+
+ smNwProtInfoModSixReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModSix 3 }
+
+
+ switchNwProtCfgModSeven OBJECT IDENTIFIER ::= { switchNwProtCfg 7 }
+
+ smNwProtInfoModSevenTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModSevenEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 7 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModSeven 1 }
+
+ smNwProtInfoModSevenEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModSevenEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 7 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModSevenIndex }
+ ::= { smNwProtInfoModSevenTable 1 }
+
+ SmNwProtInfoModSevenEntry ::= SEQUENCE {
+ smNwProtInfoModSevenIndex INTEGER,
+ smNwProtInfoModSevenId INTEGER,
+ smNwProtInfoModSevenExists INTEGER,
+ smNwProtInfoModSevenPowerState INTEGER,
+ smNwProtInfoModSevenProtName OCTET STRING,
+ smNwProtInfoModSevenProtID INTEGER,
+ smNwProtInfoModSevenExtPort INTEGER,
+ smNwProtInfoModSevenIntPort INTEGER,
+ smNwProtInfoModSevenEnable INTEGER
+ }
+
+ smNwProtInfoModSevenIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 7 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModSevenEntry 1 }
+
+ smNwProtInfoModSevenId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 7 numeric identifier."
+ ::= { smNwProtInfoModSevenEntry 2 }
+
+ smNwProtInfoModSevenExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 7 exists or not."
+ ::= { smNwProtInfoModSevenEntry 3 }
+
+ smNwProtInfoModSevenPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 7 is powered on or not."
+ ::= { smNwProtInfoModSevenEntry 4 }
+
+ smNwProtInfoModSevenProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModSevenEntry 5 }
+
+ smNwProtInfoModSevenProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModSevenEntry 6 }
+
+ smNwProtInfoModSevenExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModSevenEntry 7 }
+
+ smNwProtInfoModSevenIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModSevenEntry 8 }
+
+ smNwProtInfoModSevenEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModSevenEntry 9 }
+
+ smNwProtInfoModSevenActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModSeven 2 }
+
+ smNwProtInfoModSevenReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModSeven 3 }
+
+
+ switchNwProtCfgModEight OBJECT IDENTIFIER ::= { switchNwProtCfg 8 }
+
+ smNwProtInfoModEightTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModEightEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 8 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModEight 1 }
+
+ smNwProtInfoModEightEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModEightEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 8 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModEightIndex }
+ ::= { smNwProtInfoModEightTable 1 }
+
+ SmNwProtInfoModEightEntry ::= SEQUENCE {
+ smNwProtInfoModEightIndex INTEGER,
+ smNwProtInfoModEightId INTEGER,
+ smNwProtInfoModEightExists INTEGER,
+ smNwProtInfoModEightPowerState INTEGER,
+ smNwProtInfoModEightProtName OCTET STRING,
+ smNwProtInfoModEightProtID INTEGER,
+ smNwProtInfoModEightExtPort INTEGER,
+ smNwProtInfoModEightIntPort INTEGER,
+ smNwProtInfoModEightEnable INTEGER
+ }
+
+ smNwProtInfoModEightIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 8 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModEightEntry 1 }
+
+ smNwProtInfoModEightId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 8 numeric identifier."
+ ::= { smNwProtInfoModEightEntry 2 }
+
+ smNwProtInfoModEightExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 8 exists or not."
+ ::= { smNwProtInfoModEightEntry 3 }
+
+ smNwProtInfoModEightPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 8 is powered on or not."
+ ::= { smNwProtInfoModEightEntry 4 }
+
+ smNwProtInfoModEightProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModEightEntry 5 }
+
+ smNwProtInfoModEightProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModEightEntry 6 }
+
+ smNwProtInfoModEightExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModEightEntry 7 }
+
+ smNwProtInfoModEightIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModEightEntry 8 }
+
+ smNwProtInfoModEightEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModEightEntry 9 }
+
+ smNwProtInfoModEightActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModEight 2 }
+
+ smNwProtInfoModEightReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModEight 3 }
+
+ switchNwProtCfgModNine OBJECT IDENTIFIER ::= { switchNwProtCfg 9 }
+
+ smNwProtInfoModNineTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModNineEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 9 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModNine 1 }
+
+ smNwProtInfoModNineEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModNineEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 9 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModNineIndex }
+ ::= { smNwProtInfoModNineTable 1 }
+
+ SmNwProtInfoModNineEntry ::= SEQUENCE {
+ smNwProtInfoModNineIndex INTEGER,
+ smNwProtInfoModNineId INTEGER,
+ smNwProtInfoModNineExists INTEGER,
+ smNwProtInfoModNinePowerState INTEGER,
+ smNwProtInfoModNineProtName OCTET STRING,
+ smNwProtInfoModNineProtID INTEGER,
+ smNwProtInfoModNineExtPort INTEGER,
+ smNwProtInfoModNineIntPort INTEGER,
+ smNwProtInfoModNineEnable INTEGER
+ }
+
+ smNwProtInfoModNineIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 9 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModNineEntry 1 }
+
+ smNwProtInfoModNineId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 9 numeric identifier."
+ ::= { smNwProtInfoModNineEntry 2 }
+
+ smNwProtInfoModNineExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 9 exists or not."
+ ::= { smNwProtInfoModNineEntry 3 }
+
+ smNwProtInfoModNinePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 9 is powered on or not."
+ ::= { smNwProtInfoModNineEntry 4 }
+
+ smNwProtInfoModNineProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModNineEntry 5 }
+
+ smNwProtInfoModNineProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModNineEntry 6 }
+
+ smNwProtInfoModNineExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModNineEntry 7 }
+
+ smNwProtInfoModNineIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModNineEntry 8 }
+
+ smNwProtInfoModNineEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModNineEntry 9 }
+
+ smNwProtInfoModNineActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModNine 2 }
+
+ smNwProtInfoModNineReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModNine 3 }
+
+ switchNwProtCfgModTen OBJECT IDENTIFIER ::= { switchNwProtCfg 10 }
+
+ smNwProtInfoModTenTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNwProtInfoModTenEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 10 network protocol (Network Address Translation) information."
+ ::= { switchNwProtCfgModTen 1 }
+
+ smNwProtInfoModTenEntry OBJECT-TYPE
+ SYNTAX SmNwProtInfoModTenEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 10 network protocol (Network Address Translation) configuration
+ information table entry"
+ INDEX { smNwProtInfoModTenIndex }
+ ::= { smNwProtInfoModTenTable 1 }
+
+ SmNwProtInfoModTenEntry ::= SEQUENCE {
+ smNwProtInfoModTenIndex INTEGER,
+ smNwProtInfoModTenId INTEGER,
+ smNwProtInfoModTenExists INTEGER,
+ smNwProtInfoModTenPowerState INTEGER,
+ smNwProtInfoModTenProtName OCTET STRING,
+ smNwProtInfoModTenProtID INTEGER,
+ smNwProtInfoModTenExtPort INTEGER,
+ smNwProtInfoModTenIntPort INTEGER,
+ smNwProtInfoModTenEnable INTEGER
+ }
+
+ smNwProtInfoModTenIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module 10 network protocol (Network Address Translation) information index."
+ ::= { smNwProtInfoModTenEntry 1 }
+
+ smNwProtInfoModTenId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module1(1),
+ module2(2),
+ module3(3),
+ module4(4),
+ module5(5),
+ module6(6),
+ module7(7),
+ module8(8),
+ module9(9),
+ module10(10)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module 10 numeric identifier."
+ ::= { smNwProtInfoModTenEntry 2 }
+
+ smNwProtInfoModTenExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 10 exists or not."
+ ::= { smNwProtInfoModTenEntry 3 }
+
+ smNwProtInfoModTenPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the switch module 10 is powered on or not."
+ ::= { smNwProtInfoModTenEntry 4 }
+
+ smNwProtInfoModTenProtName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol name"
+ ::= { smNwProtInfoModTenEntry 5 }
+
+ smNwProtInfoModTenProtID OBJECT-TYPE
+ SYNTAX INTEGER {
+ tcp(2),
+ udp(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Protocol ID"
+ ::= { smNwProtInfoModTenEntry 6 }
+
+ smNwProtInfoModTenExtPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "External port"
+ ::= { smNwProtInfoModTenEntry 7 }
+
+ smNwProtInfoModTenIntPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Internal port."
+ ::= { smNwProtInfoModTenEntry 8 }
+
+ smNwProtInfoModTenEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enable or disable the protocol entry."
+ ::= { smNwProtInfoModTenEntry 9 }
+
+ smNwProtInfoModTenActivate OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Activate all network protocol settings for the switch module.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModTen 2 }
+
+ smNwProtInfoModTenReset OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Reset all network protocol settings for the switch module to default.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { switchNwProtCfgModTen 3 }
+
+ switchIPv6Config OBJECT IDENTIFIER ::= { switchMgmtNetworkCfg 4 }
+ smIPv6ConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmIPv6ConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table of IPv6 configuration options for switch modules.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected.
+
+ NOTE: This MIB object is not applicable to modules that
+ do not support IPv6."
+ ::= { switchIPv6Config 1 }
+
+ smIPv6ConfigEntry OBJECT-TYPE
+ SYNTAX SmIPv6ConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "IPv6 configuration options for a switch module..
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected.
+
+ NOTE: This MIB object is not applicable to modules that
+ do not support IPv6."
+ INDEX { smIPv6ConfigIndex }
+ ::= { smIPv6ConfigTable 1 }
+
+ SmIPv6ConfigEntry ::= SEQUENCE {
+ smIPv6ConfigIndex INTEGER,
+ smIPv6ConfigEnabled INTEGER,
+ smIPv6ConfigStatic INTEGER,
+ smDHCPv6ConfigEnabled INTEGER,
+ smIPv6ConfigStatelessEnabled INTEGER
+ }
+
+ smIPv6ConfigIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module's slot number"
+ ::= { smIPv6ConfigEntry 1 }
+ smIPv6ConfigEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disable(0),enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables IPv6 support on the switch module."
+ ::= { smIPv6ConfigEntry 2 }
+ smIPv6ConfigStatic OBJECT-TYPE
+ SYNTAX INTEGER { disable(0),enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables IPv6 static configuration support on the switch module."
+ ::= { smIPv6ConfigEntry 3 }
+ smDHCPv6ConfigEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disable(0),enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables DHCPv6 address configuration support on the switch module."
+ ::= { smIPv6ConfigEntry 4 }
+ smIPv6ConfigStatelessEnabled OBJECT-TYPE
+ SYNTAX INTEGER { disable(0),enable(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Enables/Disables IPv6 stateless auto-configuration support on the switch module."
+ ::= { smIPv6ConfigEntry 5 }
+
+ smIPv6AddressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmIPv6AddressEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table of assigned IPv6 addresses for switch modules.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected.
+
+ NOTE: This MIB object is not applicable to modules that
+ do not support IPv6."
+ ::= { switchIPv6Config 2 }
+
+ smIPv6AddressEntry OBJECT-TYPE
+ SYNTAX SmIPv6AddressEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The assigned IPv6 address for a given switch module
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected.
+
+ NOTE: This MIB object is not applicable to modules that
+ do not support IPv6."
+ INDEX { smIPv6AddressIndex, smIPv6AddressEntryIndex}
+ ::= { smIPv6AddressTable 1 }
+
+ SmIPv6AddressEntry ::= SEQUENCE {
+ smIPv6AddressIndex INTEGER,
+ smIPv6AddressEntryIndex INTEGER,
+ smIPv6AddressType INTEGER,
+ smIPv6Address InetAddressIPv6,
+ smIPv6AddressPrefixLen INTEGER,
+ smIPv6AddressDefaultRoute InetAddressIPv6
+ }
+
+ smIPv6AddressIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module's slot number"
+ ::= { smIPv6AddressEntry 1 }
+ smIPv6AddressEntryIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module's address entry index"
+ ::= { smIPv6AddressEntry 2 }
+ smIPv6AddressType OBJECT-TYPE
+ SYNTAX INTEGER { static(1), dhcp6(2), link-local(3), autconfig(4), configured-static(5) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The address type."
+ ::= { smIPv6AddressEntry 3 }
+ smIPv6Address OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The assigned IPv6 address"
+ ::= { smIPv6AddressEntry 4 }
+ smIPv6AddressPrefixLen OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The prefix length for the given address."
+ ::= { smIPv6AddressEntry 5 }
+ smIPv6AddressDefaultRoute OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The default route used for the given address"
+ ::= { smIPv6AddressEntry 6 }
+
+ smIPv6StaticConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmIPv6StaticConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Allows configuration of static IPv6 information for supported
+ IO modules.
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected.
+
+ NOTE: This MIB object is not applicable to modules that
+ do not support IPv6."
+ ::= { switchIPv6Config 3 }
+
+ smIPv6StaticConfigEntry OBJECT-TYPE
+ SYNTAX SmIPv6StaticConfigEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The static IP address assignment information for an
+ IO module. Once the assignement has taken place the address
+ will show up as a row in the smIPv6AddressTable
+
+ NOTE: This MIB object is not applicable to modules that are running in
+ Stacking Mode and IP configuration is protected.
+
+ NOTE: This MIB object is not applicable to modules that
+ do not support IPv6."
+ INDEX { smIPv6StaticIndex}
+ ::= { smIPv6StaticConfigTable 1 }
+
+ SmIPv6StaticConfigEntry ::= SEQUENCE {
+ smIPv6StaticIndex INTEGER,
+ smIPv6StaticAddress InetAddressIPv6,
+ smIPv6StaticAddressPrefixLen INTEGER,
+ smIPv6StaticAddressDefaultRoute InetAddressIPv6
+ }
+
+ smIPv6StaticIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch module's slot number"
+ ::= { smIPv6StaticConfigEntry 1 }
+ smIPv6StaticAddress OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The assigned IPv6 address.
+
+ NOTE: If changing with smIPv6StaticAddressPrefixLen and/or
+ smIPv6StaticAddressDefaultRoute sending the update as a
+ single SET command(in one PDU) will minimize the potential
+ downtime of the target switch.
+
+ NOTE: Sets on this object can take a few seconds. You may
+ need to update your SNMP timeout when modifying this setting."
+ ::= { smIPv6StaticConfigEntry 2 }
+ smIPv6StaticAddressPrefixLen OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The prefix length for the given address.
+
+ NOTE: If changing with smIPv6StaticAddress and/or
+ smIPv6StaticAddressDefaultRoute sending the update as a
+ single SET command(in one PDU) will minimize the potential
+ downtime of the target switch.
+
+ NOTE: Sets on this object can take a few seconds. You may
+ need to update your SNMP timeout when modifying this setting."
+ ::= { smIPv6StaticConfigEntry 3 }
+ smIPv6StaticAddressDefaultRoute OBJECT-TYPE
+ SYNTAX InetAddressIPv6
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The default route used for the given address
+
+ NOTE: If changing with smIPv6StaticAddressPrefixLen and/or
+ smIPv6StaticAddress sending the update as a
+ single SET command(in one PDU) will minimize the potential
+ downtime of the target switch.
+
+ NOTE: Sets on this object can take a few seconds. You may
+ need to update your SNMP timeout when modifying this setting."
+ ::= { smIPv6StaticConfigEntry 4 }
+
+ -- ********************************************************************************
+ -- Switch module port tables
+ -- ********************************************************************************
+ switchPortCfg OBJECT IDENTIFIER ::= { switchModuleConfig 2 }
+
+ switchModOnePortCfg OBJECT IDENTIFIER ::= { switchPortCfg 1 }
+
+ smOnePortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmOnePortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 1 port configuration information.
+ NOTE: This option is not supported on all I/O modules."
+ ::= { switchModOnePortCfg 1 }
+
+ smOnePortCfgEntry OBJECT-TYPE
+ SYNTAX SmOnePortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 1 port configuration information table entry"
+ INDEX { smOnePortCfgIndex }
+ ::= { smOnePortCfgTable 1 }
+
+ SmOnePortCfgEntry ::= SEQUENCE {
+ smOnePortCfgIndex INTEGER,
+ smOnePortCfgLabel OCTET STRING,
+ smOnePortCfgType INTEGER,
+ smOnePortCfgLinkSetting INTEGER,
+ smOnePortCfgLinkState INTEGER,
+ smOnePortCfgSpeedSetting OCTET STRING,
+ smOnePortCfgSpeedStatus OCTET STRING,
+ smOnePortCfgAvailSpeeds OCTET STRING,
+ smOnePortCfgMedia INTEGER,
+ smOnePortCfgProtocol INTEGER,
+ smOnePortCfgWidth INTEGER,
+ smOnePortCfgCableLength INTEGER,
+ smOnePortCfgCableType OCTET STRING,
+ smOnePortCfgVendorName OCTET STRING,
+ smOnePortCfgCompatibility INTEGER,
+ smOnePortCfgDataRate INTEGER
+ }
+
+ smOnePortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 1 port sequence index."
+ ::= { smOnePortCfgEntry 1 }
+
+ smOnePortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 1 port label"
+ ::= { smOnePortCfgEntry 2 }
+
+ smOnePortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 1 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smOnePortCfgEntry 3 }
+
+ smOnePortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 1."
+ ::= { smOnePortCfgEntry 4 }
+
+ smOnePortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 1."
+ ::= { smOnePortCfgEntry 5 }
+
+ smOnePortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100 Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smOnePortCfgAvailSpeeds object are applicable to setting
+ this mib object."
+ ::= { smOnePortCfgEntry 6 }
+
+ smOnePortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 1."
+ ::= { smOnePortCfgEntry 7 }
+
+ smOnePortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 1.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smOnePortCfgEntry 8 }
+
+ smOnePortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 1."
+ ::= { smOnePortCfgEntry 9 }
+
+ smOnePortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 1."
+ ::= { smOnePortCfgEntry 10 }
+
+ smOnePortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 1.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smOnePortCfgEntry 11 }
+
+ smOnePortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 1.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smOnePortCfgEntry 12 }
+
+ smOnePortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smOnePortCfgEntry 13 }
+
+ smOnePortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smOnePortCfgEntry 14 }
+
+ smOnePortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smOnePortCfgEntry 15 }
+
+ smOnePortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smOnePortCfgEntry 16 }
+
+
+ switchModTwoPortCfg OBJECT IDENTIFIER ::= { switchPortCfg 2 }
+
+ smTwoPortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmTwoPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 2 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModTwoPortCfg 1 }
+
+ smTwoPortCfgEntry OBJECT-TYPE
+ SYNTAX SmTwoPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 2 port configuration information table entry"
+ INDEX { smTwoPortCfgIndex }
+ ::= { smTwoPortCfgTable 1 }
+
+ SmTwoPortCfgEntry ::= SEQUENCE {
+ smTwoPortCfgIndex INTEGER,
+ smTwoPortCfgLabel OCTET STRING,
+ smTwoPortCfgType INTEGER,
+ smTwoPortCfgLinkSetting INTEGER,
+ smTwoPortCfgLinkState INTEGER,
+ smTwoPortCfgSpeedSetting OCTET STRING,
+ smTwoPortCfgSpeedStatus OCTET STRING,
+ smTwoPortCfgAvailSpeeds OCTET STRING,
+ smTwoPortCfgMedia INTEGER,
+ smTwoPortCfgProtocol INTEGER,
+ smTwoPortCfgWidth INTEGER,
+ smTwoPortCfgCableLength INTEGER,
+ smTwoPortCfgCableType OCTET STRING,
+ smTwoPortCfgVendorName OCTET STRING,
+ smTwoPortCfgCompatibility INTEGER,
+ smTwoPortCfgDataRate INTEGER
+ }
+
+ smTwoPortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 2 port sequence index."
+ ::= { smTwoPortCfgEntry 1 }
+
+ smTwoPortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 2 port label"
+ ::= { smTwoPortCfgEntry 2 }
+
+ smTwoPortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 2 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smTwoPortCfgEntry 3 }
+
+ smTwoPortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 2."
+ ::= { smTwoPortCfgEntry 4 }
+
+ smTwoPortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 2."
+ ::= { smTwoPortCfgEntry 5 }
+
+ smTwoPortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smTwoPortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smTwoPortCfgEntry 6 }
+
+ smTwoPortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 2."
+ ::= { smTwoPortCfgEntry 7 }
+
+ smTwoPortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 2.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smTwoPortCfgEntry 8 }
+
+ smTwoPortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 2."
+ ::= { smTwoPortCfgEntry 9 }
+
+ smTwoPortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 2."
+ ::= { smTwoPortCfgEntry 10 }
+
+ smTwoPortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 2.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smTwoPortCfgEntry 11 }
+
+ smTwoPortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 2.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smTwoPortCfgEntry 12 }
+
+ smTwoPortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smTwoPortCfgEntry 13 }
+
+ smTwoPortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smTwoPortCfgEntry 14 }
+
+ smTwoPortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smTwoPortCfgEntry 15 }
+
+ smTwoPortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smTwoPortCfgEntry 16 }
+
+ switchModThreePortCfg OBJECT IDENTIFIER ::= { switchPortCfg 3 }
+
+ smThreePortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmThreePortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 3 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModThreePortCfg 1 }
+
+ smThreePortCfgEntry OBJECT-TYPE
+ SYNTAX SmThreePortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 3 port configuration information table entry"
+ INDEX { smThreePortCfgIndex }
+ ::= { smThreePortCfgTable 1 }
+
+ SmThreePortCfgEntry ::= SEQUENCE {
+ smThreePortCfgIndex INTEGER,
+ smThreePortCfgLabel OCTET STRING,
+ smThreePortCfgType INTEGER,
+ smThreePortCfgLinkSetting INTEGER,
+ smThreePortCfgLinkState INTEGER,
+ smThreePortCfgSpeedSetting OCTET STRING,
+ smThreePortCfgSpeedStatus OCTET STRING,
+ smThreePortCfgAvailSpeeds OCTET STRING,
+ smThreePortCfgMedia INTEGER,
+ smThreePortCfgProtocol INTEGER,
+ smThreePortCfgWidth INTEGER,
+ smThreePortCfgCableLength INTEGER,
+ smThreePortCfgCableType OCTET STRING,
+ smThreePortCfgVendorName OCTET STRING,
+ smThreePortCfgCompatibility INTEGER,
+ smThreePortCfgDataRate INTEGER
+ }
+
+ smThreePortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 3 port sequence index."
+ ::= { smThreePortCfgEntry 1 }
+
+ smThreePortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 3 port label"
+ ::= { smThreePortCfgEntry 2 }
+
+ smThreePortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 3 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smThreePortCfgEntry 3 }
+
+ smThreePortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 3."
+ ::= { smThreePortCfgEntry 4 }
+
+ smThreePortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 3."
+ ::= { smThreePortCfgEntry 5 }
+
+ smThreePortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smThreePortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smThreePortCfgEntry 6 }
+
+ smThreePortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 3."
+ ::= { smThreePortCfgEntry 7 }
+
+ smThreePortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 3.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smThreePortCfgEntry 8 }
+
+ smThreePortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 3."
+ ::= { smThreePortCfgEntry 9 }
+
+ smThreePortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 3."
+ ::= { smThreePortCfgEntry 10 }
+
+ smThreePortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 3.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smThreePortCfgEntry 11 }
+
+ smThreePortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 3.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smThreePortCfgEntry 12 }
+
+ smThreePortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smThreePortCfgEntry 13 }
+
+ smThreePortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smThreePortCfgEntry 14 }
+
+ smThreePortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smThreePortCfgEntry 15 }
+
+ smThreePortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smThreePortCfgEntry 16 }
+
+
+ switchModFourPortCfg OBJECT IDENTIFIER ::= { switchPortCfg 4 }
+
+ smFourPortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmFourPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 4 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModFourPortCfg 1 }
+
+ smFourPortCfgEntry OBJECT-TYPE
+ SYNTAX SmFourPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 4 port configuration information table entry"
+ INDEX { smFourPortCfgIndex }
+ ::= { smFourPortCfgTable 1 }
+
+ SmFourPortCfgEntry ::= SEQUENCE {
+ smFourPortCfgIndex INTEGER,
+ smFourPortCfgLabel OCTET STRING,
+ smFourPortCfgType INTEGER,
+ smFourPortCfgLinkSetting INTEGER,
+ smFourPortCfgLinkState INTEGER,
+ smFourPortCfgSpeedSetting OCTET STRING,
+ smFourPortCfgSpeedStatus OCTET STRING,
+ smFourPortCfgAvailSpeeds OCTET STRING,
+ smFourPortCfgMedia INTEGER,
+ smFourPortCfgProtocol INTEGER,
+ smFourPortCfgWidth INTEGER,
+ smFourPortCfgCableLength INTEGER,
+ smFourPortCfgCableType OCTET STRING,
+ smFourPortCfgVendorName OCTET STRING,
+ smFourPortCfgCompatibility INTEGER,
+ smFourPortCfgDataRate INTEGER
+ }
+
+ smFourPortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 4 port sequence index."
+ ::= { smFourPortCfgEntry 1 }
+
+ smFourPortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 4 port label"
+ ::= { smFourPortCfgEntry 2 }
+
+ smFourPortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 4 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smFourPortCfgEntry 3 }
+
+ smFourPortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 4."
+ ::= { smFourPortCfgEntry 4 }
+
+ smFourPortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 4."
+ ::= { smFourPortCfgEntry 5 }
+
+ smFourPortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smFourPortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smFourPortCfgEntry 6 }
+
+ smFourPortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 4."
+ ::= { smFourPortCfgEntry 7 }
+
+
+ smFourPortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 4.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smFourPortCfgEntry 8 }
+
+ smFourPortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 4."
+ ::= { smFourPortCfgEntry 9 }
+
+ smFourPortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 4."
+ ::= { smFourPortCfgEntry 10 }
+
+ smFourPortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 4.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smFourPortCfgEntry 11 }
+
+ smFourPortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 4.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smFourPortCfgEntry 12 }
+
+ smFourPortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smFourPortCfgEntry 13 }
+
+ smFourPortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smFourPortCfgEntry 14 }
+
+ smFourPortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smFourPortCfgEntry 15 }
+
+ smFourPortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smFourPortCfgEntry 16 }
+
+
+ switchModFivePortCfg OBJECT IDENTIFIER ::= { switchPortCfg 5 }
+
+ smFivePortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmFivePortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 5 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModFivePortCfg 1 }
+
+ smFivePortCfgEntry OBJECT-TYPE
+ SYNTAX SmFivePortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 5 port configuration information table entry"
+ INDEX { smFivePortCfgIndex }
+ ::= { smFivePortCfgTable 1 }
+
+ SmFivePortCfgEntry ::= SEQUENCE {
+ smFivePortCfgIndex INTEGER,
+ smFivePortCfgLabel OCTET STRING,
+ smFivePortCfgType INTEGER,
+ smFivePortCfgLinkSetting INTEGER,
+ smFivePortCfgLinkState INTEGER,
+ smFivePortCfgSpeedSetting OCTET STRING,
+ smFivePortCfgSpeedStatus OCTET STRING,
+ smFivePortCfgAvailSpeeds OCTET STRING,
+ smFivePortCfgMedia INTEGER,
+ smFivePortCfgProtocol INTEGER,
+ smFivePortCfgWidth INTEGER,
+ smFivePortCfgCableLength INTEGER,
+ smFivePortCfgCableType OCTET STRING,
+ smFivePortCfgVendorName OCTET STRING,
+ smFivePortCfgCompatibility INTEGER,
+ smFivePortCfgDataRate INTEGER
+ }
+
+ smFivePortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 5 port sequence index."
+ ::= { smFivePortCfgEntry 1 }
+
+ smFivePortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 5 port label"
+ ::= { smFivePortCfgEntry 2 }
+
+ smFivePortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 5 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smFivePortCfgEntry 3 }
+
+ smFivePortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 5."
+ ::= { smFivePortCfgEntry 4 }
+
+ smFivePortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 5."
+ ::= { smFivePortCfgEntry 5 }
+
+ smFivePortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smFivePortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smFivePortCfgEntry 6 }
+
+ smFivePortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 5."
+ ::= { smFivePortCfgEntry 7 }
+
+ smFivePortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 5.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smFivePortCfgEntry 8 }
+
+ smFivePortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 5."
+ ::= { smFivePortCfgEntry 9 }
+
+ smFivePortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 5."
+ ::= { smFivePortCfgEntry 10 }
+
+ smFivePortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 5.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smFivePortCfgEntry 11 }
+
+ smFivePortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 5.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smFivePortCfgEntry 12 }
+
+ smFivePortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smFivePortCfgEntry 13 }
+
+ smFivePortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smFivePortCfgEntry 14 }
+
+ smFivePortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smFivePortCfgEntry 15 }
+
+ smFivePortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smFivePortCfgEntry 16 }
+
+
+ switchModSixPortCfg OBJECT IDENTIFIER ::= { switchPortCfg 6 }
+
+ smSixPortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmSixPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 6 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModSixPortCfg 1 }
+
+ smSixPortCfgEntry OBJECT-TYPE
+ SYNTAX SmSixPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 6 port configuration information table entry"
+ INDEX { smSixPortCfgIndex }
+ ::= { smSixPortCfgTable 1 }
+
+ SmSixPortCfgEntry ::= SEQUENCE {
+ smSixPortCfgIndex INTEGER,
+ smSixPortCfgLabel OCTET STRING,
+ smSixPortCfgType INTEGER,
+ smSixPortCfgLinkSetting INTEGER,
+ smSixPortCfgLinkState INTEGER,
+ smSixPortCfgSpeedSetting OCTET STRING,
+ smSixPortCfgSpeedStatus OCTET STRING,
+ smSixPortCfgAvailSpeeds OCTET STRING,
+ smSixPortCfgMedia INTEGER,
+ smSixPortCfgProtocol INTEGER,
+ smSixPortCfgWidth INTEGER,
+ smSixPortCfgCableLength INTEGER,
+ smSixPortCfgCableType OCTET STRING,
+ smSixPortCfgVendorName OCTET STRING,
+ smSixPortCfgCompatibility INTEGER,
+ smSixPortCfgDataRate INTEGER
+ }
+
+ smSixPortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 6 port sequence index."
+ ::= { smSixPortCfgEntry 1 }
+
+ smSixPortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 6 port label"
+ ::= { smSixPortCfgEntry 2 }
+
+ smSixPortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 6 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smSixPortCfgEntry 3 }
+
+ smSixPortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 6."
+ ::= { smSixPortCfgEntry 4 }
+
+ smSixPortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 6."
+ ::= { smSixPortCfgEntry 5 }
+
+ smSixPortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smSixPortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smSixPortCfgEntry 6 }
+
+ smSixPortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 6."
+ ::= { smSixPortCfgEntry 7 }
+
+ smSixPortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 6.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smSixPortCfgEntry 8 }
+
+ smSixPortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 6."
+ ::= { smSixPortCfgEntry 9 }
+
+ smSixPortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 6."
+ ::= { smSixPortCfgEntry 10 }
+
+ smSixPortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 6.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smSixPortCfgEntry 11 }
+
+ smSixPortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 6.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smSixPortCfgEntry 12 }
+
+ smSixPortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smSixPortCfgEntry 13 }
+
+ smSixPortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smSixPortCfgEntry 14 }
+
+ smSixPortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smSixPortCfgEntry 15 }
+
+ smSixPortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smSixPortCfgEntry 16 }
+
+
+ switchModSevenPortCfg OBJECT IDENTIFIER ::= { switchPortCfg 7 }
+
+ smSevenPortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmSevenPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 7 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModSevenPortCfg 1 }
+
+ smSevenPortCfgEntry OBJECT-TYPE
+ SYNTAX SmSevenPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 7 port configuration information table entry"
+ INDEX { smSevenPortCfgIndex }
+ ::= { smSevenPortCfgTable 1 }
+
+ SmSevenPortCfgEntry ::= SEQUENCE {
+ smSevenPortCfgIndex INTEGER,
+ smSevenPortCfgLabel OCTET STRING,
+ smSevenPortCfgType INTEGER,
+ smSevenPortCfgLinkSetting INTEGER,
+ smSevenPortCfgLinkState INTEGER,
+ smSevenPortCfgSpeedSetting OCTET STRING,
+ smSevenPortCfgSpeedStatus OCTET STRING,
+ smSevenPortCfgAvailSpeeds OCTET STRING,
+ smSevenPortCfgMedia INTEGER,
+ smSevenPortCfgProtocol INTEGER,
+ smSevenPortCfgWidth INTEGER,
+ smSevenPortCfgCableLength INTEGER,
+ smSevenPortCfgCableType OCTET STRING,
+ smSevenPortCfgVendorName OCTET STRING,
+ smSevenPortCfgCompatibility INTEGER,
+ smSevenPortCfgDataRate INTEGER
+ }
+
+ smSevenPortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 7 port sequence index."
+ ::= { smSevenPortCfgEntry 1 }
+
+ smSevenPortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 7 port label"
+ ::= { smSevenPortCfgEntry 2 }
+
+ smSevenPortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 7 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smSevenPortCfgEntry 3 }
+
+ smSevenPortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 7."
+ ::= { smSevenPortCfgEntry 4 }
+
+ smSevenPortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 7."
+ ::= { smSevenPortCfgEntry 5 }
+
+ smSevenPortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smSevenPortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smSevenPortCfgEntry 6 }
+
+ smSevenPortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 7."
+ ::= { smSevenPortCfgEntry 7 }
+
+ smSevenPortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 7.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smSevenPortCfgEntry 8 }
+
+ smSevenPortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 7."
+ ::= { smSevenPortCfgEntry 9 }
+
+ smSevenPortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 7."
+ ::= { smSevenPortCfgEntry 10 }
+
+ smSevenPortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 7.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smSevenPortCfgEntry 11 }
+
+ smSevenPortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 7.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smSevenPortCfgEntry 12 }
+
+ smSevenPortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smSevenPortCfgEntry 13 }
+
+ smSevenPortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smSevenPortCfgEntry 14 }
+
+ smSevenPortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smSevenPortCfgEntry 15 }
+
+ smSevenPortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smSevenPortCfgEntry 16 }
+
+
+ switchModEightPortCfg OBJECT IDENTIFIER ::= { switchPortCfg 8 }
+
+ smEightPortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmEightPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 8 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModEightPortCfg 1 }
+
+ smEightPortCfgEntry OBJECT-TYPE
+ SYNTAX SmEightPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 8 port configuration information table entry"
+ INDEX { smEightPortCfgIndex }
+ ::= { smEightPortCfgTable 1 }
+
+ SmEightPortCfgEntry ::= SEQUENCE {
+ smEightPortCfgIndex INTEGER,
+ smEightPortCfgLabel OCTET STRING,
+ smEightPortCfgType INTEGER,
+ smEightPortCfgLinkSetting INTEGER,
+ smEightPortCfgLinkState INTEGER,
+ smEightPortCfgSpeedSetting OCTET STRING,
+ smEightPortCfgSpeedStatus OCTET STRING,
+ smEightPortCfgAvailSpeeds OCTET STRING,
+ smEightPortCfgMedia INTEGER,
+ smEightPortCfgProtocol INTEGER,
+ smEightPortCfgWidth INTEGER,
+ smEightPortCfgCableLength INTEGER,
+ smEightPortCfgCableType OCTET STRING,
+ smEightPortCfgVendorName OCTET STRING,
+ smEightPortCfgCompatibility INTEGER,
+ smEightPortCfgDataRate INTEGER
+ }
+
+ smEightPortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 8 port sequence index."
+ ::= { smEightPortCfgEntry 1 }
+
+ smEightPortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 8 port label"
+ ::= { smEightPortCfgEntry 2 }
+
+ smEightPortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 8 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smEightPortCfgEntry 3 }
+
+ smEightPortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 8."
+ ::= { smEightPortCfgEntry 4 }
+
+ smEightPortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 8."
+ ::= { smEightPortCfgEntry 5 }
+
+ smEightPortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smEightPortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smEightPortCfgEntry 6 }
+
+ smEightPortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 8."
+ ::= { smEightPortCfgEntry 7 }
+
+ smEightPortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 8.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smEightPortCfgEntry 8 }
+
+ smEightPortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 8."
+ ::= { smEightPortCfgEntry 9 }
+
+ smEightPortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 8."
+ ::= { smEightPortCfgEntry 10 }
+
+ smEightPortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 8.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smEightPortCfgEntry 11 }
+
+ smEightPortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 8.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smEightPortCfgEntry 12 }
+
+ smEightPortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smEightPortCfgEntry 13 }
+
+ smEightPortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smEightPortCfgEntry 14 }
+
+ smEightPortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smEightPortCfgEntry 15 }
+
+ smEightPortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smEightPortCfgEntry 16 }
+
+
+ switchModNinePortCfg OBJECT IDENTIFIER ::= { switchPortCfg 9 }
+
+ smNinePortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmNinePortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 9 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModNinePortCfg 1 }
+
+ smNinePortCfgEntry OBJECT-TYPE
+ SYNTAX SmNinePortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 9 port configuration information table entry"
+ INDEX { smNinePortCfgIndex }
+ ::= { smNinePortCfgTable 1 }
+
+ SmNinePortCfgEntry ::= SEQUENCE {
+ smNinePortCfgIndex INTEGER,
+ smNinePortCfgLabel OCTET STRING,
+ smNinePortCfgType INTEGER,
+ smNinePortCfgLinkSetting INTEGER,
+ smNinePortCfgLinkState INTEGER,
+ smNinePortCfgSpeedSetting OCTET STRING,
+ smNinePortCfgSpeedStatus OCTET STRING,
+ smNinePortCfgAvailSpeeds OCTET STRING,
+ smNinePortCfgMedia INTEGER,
+ smNinePortCfgProtocol INTEGER,
+ smNinePortCfgWidth INTEGER,
+ smNinePortCfgCableLength INTEGER,
+ smNinePortCfgCableType OCTET STRING,
+ smNinePortCfgVendorName OCTET STRING,
+ smNinePortCfgCompatibility INTEGER,
+ smNinePortCfgDataRate INTEGER
+ }
+
+ smNinePortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 9 port sequence index."
+ ::= { smNinePortCfgEntry 1 }
+
+ smNinePortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 9 port label"
+ ::= { smNinePortCfgEntry 2 }
+
+ smNinePortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 9 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smNinePortCfgEntry 3 }
+
+ smNinePortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 9."
+ ::= { smNinePortCfgEntry 4 }
+
+ smNinePortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 9."
+ ::= { smNinePortCfgEntry 5 }
+
+ smNinePortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smNinePortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smNinePortCfgEntry 6 }
+
+ smNinePortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 9."
+ ::= { smNinePortCfgEntry 7 }
+
+ smNinePortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 9.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smNinePortCfgEntry 8 }
+
+ smNinePortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 9."
+ ::= { smNinePortCfgEntry 9 }
+
+ smNinePortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 9."
+ ::= { smNinePortCfgEntry 10 }
+
+ smNinePortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 9.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smNinePortCfgEntry 11 }
+
+ smNinePortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 9.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smNinePortCfgEntry 12 }
+
+ smNinePortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smNinePortCfgEntry 13 }
+
+ smNinePortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smNinePortCfgEntry 14 }
+
+ smNinePortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smNinePortCfgEntry 15 }
+
+ smNinePortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smNinePortCfgEntry 16 }
+
+
+ switchModTenPortCfg OBJECT IDENTIFIER ::= { switchPortCfg 10 }
+
+ smTenPortCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmTenPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 10 port configuration information.
+ Note: This option is not supported on all I/O modules."
+ ::= { switchModTenPortCfg 1 }
+
+ smTenPortCfgEntry OBJECT-TYPE
+ SYNTAX SmTenPortCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 10 port configuration information table entry"
+ INDEX { smTenPortCfgIndex }
+ ::= { smTenPortCfgTable 1 }
+
+ SmTenPortCfgEntry ::= SEQUENCE {
+ smTenPortCfgIndex INTEGER,
+ smTenPortCfgLabel OCTET STRING,
+ smTenPortCfgType INTEGER,
+ smTenPortCfgLinkSetting INTEGER,
+ smTenPortCfgLinkState INTEGER,
+ smTenPortCfgSpeedSetting OCTET STRING,
+ smTenPortCfgSpeedStatus OCTET STRING,
+ smTenPortCfgAvailSpeeds OCTET STRING,
+ smTenPortCfgMedia INTEGER,
+ smTenPortCfgProtocol INTEGER,
+ smTenPortCfgWidth INTEGER,
+ smTenPortCfgCableLength INTEGER,
+ smTenPortCfgCableType OCTET STRING,
+ smTenPortCfgVendorName OCTET STRING,
+ smTenPortCfgCompatibility INTEGER,
+ smTenPortCfgDataRate INTEGER
+ }
+
+ smTenPortCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 10 port sequence index."
+ ::= { smTenPortCfgEntry 1 }
+
+ smTenPortCfgLabel OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 10 port label"
+ ::= { smTenPortCfgEntry 2 }
+
+ smTenPortCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unused(0),
+ externalPort(1),
+ externalManagementPort(2),
+ externalDualPort(3),
+ bladePort(4),
+ mmManagementPort(5),
+ uplinkPort(6),
+ interModulePort(7),
+ interModuleManagementPort(8),
+ interModuleDualPort(9),
+ interModuleExternalBridgePort(10),
+ interModuleDualInternalBridgePort(11)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module 10 port type:
+ External port: This port is connected to external device and is for data traffic.
+ External management port: This port is solely for external management connection.
+ This port is not used for data traffic from remote to blades.
+ External dual port: This external port is used for both data traffic to blades as well as for management.
+ Blade port: This port is connected to the blade.
+ Management Module Management port: This port is connected to the Management Module.
+ Uplink port: This port is configured for up link functionality.
+ Inter-Module port: This port is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type.
+ Inter-Module Management port: This port is connected to another I/O Module for management purpose.
+ The port type is either by design connected to another I/O Module, by user configured,
+ or by AMM setting the port type.
+ Inter-Module Dual port: The port is connected to another I/O Module and can be used for both data
+ and management purposes. The port type is either by design connected to another I/O Module,
+ by user configured, or by AMM setting the port type."
+ ::= { smTenPortCfgEntry 3 }
+
+ smTenPortCfgLinkSetting OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link setting for Switch Module 10."
+ ::= { smTenPortCfgEntry 4 }
+
+ smTenPortCfgLinkState OBJECT-TYPE
+ SYNTAX INTEGER {
+ down(0),
+ up(1),
+ initialized(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port link state of Switch Module 10."
+ ::= { smTenPortCfgEntry 5 }
+
+ smTenPortCfgSpeedSetting OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Set the port speed using the data rate and duplex value. For examples:
+ 100mf: 100Mbps in Half Duplex;
+ 10gf: 10 Gbps in Full Duplex;
+ auto: The working speed of the physical port can be tuned automatically.
+
+ NOTE: Only the speeds from smTenPortCfgAvailSpeeds are applicable to setting
+ this mib object."
+ ::= { smTenPortCfgEntry 6 }
+
+ smTenPortCfgSpeedStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Current port speed of Switch Module 10."
+ ::= { smTenPortCfgEntry 7 }
+
+ smTenPortCfgAvailSpeeds OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Available speed setting per port for Switch Module 10.
+ If there is more than one setting, the speeds are separated by a comma and then a space."
+ ::= { smTenPortCfgEntry 8 }
+
+ smTenPortCfgMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ copper(0),
+ serdes(1),
+ opticalShortHaul(32),
+ opticalLongHaul(48),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port media type of Switch Module 10."
+ ::= { smTenPortCfgEntry 9 }
+
+ smTenPortCfgProtocol OBJECT-TYPE
+ SYNTAX INTEGER {
+ ethernet(16),
+ fibreChannel(32),
+ scalability(48),
+ infiniband(64),
+ pciExpress(80),
+ myrinet(112),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Port protocol of Switch Module 10."
+ ::= { smTenPortCfgEntry 10 }
+
+ smTenPortCfgWidth OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The width of the port in terms of how many combined cables are present for Switch Module 10.
+ A value of 0 indicates this field is not applicable to the switch ports.
+ This data is also known as the lane count."
+ ::= { smTenPortCfgEntry 11 }
+
+ smTenPortCfgCableLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The length (in meters) of the cable supported by this port for Switch Module 10.
+ A value of 0 indicates this field is not applicable to the switch ports."
+ ::= { smTenPortCfgEntry 12 }
+
+ smTenPortCfgCableType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "External cable type for this port, for example, active copper or passive fiber."
+ ::= { smTenPortCfgEntry 13 }
+
+ smTenPortCfgVendorName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The cable manufacturer."
+ ::= { smTenPortCfgEntry 14 }
+
+ smTenPortCfgCompatibility OBJECT-TYPE
+ SYNTAX INTEGER {
+ incompatible(0),
+ compatible(1),
+ compatibleNotRecommended(2),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Compatibility of the external cable that is plugged into the port."
+ ::= { smTenPortCfgEntry 15 }
+
+ smTenPortCfgDataRate OBJECT-TYPE
+ SYNTAX INTEGER {
+ sdr(0),
+ ddr(1),
+ qdr(2),
+ edr(3),
+ notApplicable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Data rate supported for this port."
+ ::= { smTenPortCfgEntry 16 }
+
+
+ -- ********************************************************************************
+ -- RAID Controller config
+ -- ********************************************************************************
+ raidControllerConfig OBJECT IDENTIFIER ::= { switchModule 3 }
+
+ raidControllerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RaidControllerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller control table."
+ ::= { raidControllerConfig 1 }
+
+ raidControllerEntry OBJECT-TYPE
+ SYNTAX RaidControllerEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller control table entry."
+ INDEX { raidControllerIndex }
+ ::= { raidControllerTable 1 }
+
+ RaidControllerEntry ::= SEQUENCE {
+ raidControllerIndex INTEGER,
+ raidControllerId INTEGER,
+ raidControllerExists INTEGER,
+ raidControllerPowerState INTEGER,
+ raidControllerMACAddress OCTET STRING,
+ raidControllerSasID OCTET STRING,
+ raidControllerPingRequest INTEGER
+ }
+
+ raidControllerIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller control table index.
+ This MIB object is for SAS Controller Modules only."
+ ::= { raidControllerEntry 1 }
+
+ raidControllerId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module3(3),
+ module4(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The I/O Module numeric identifier for the SAS Controller Module.
+ This MIB object is for SAS Controller Modules only."
+ ::= { raidControllerEntry 2 }
+
+ raidControllerExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the I/O Module specified for the RAID Controller
+ exists or not.
+ This MIB object is for SAS Controller Modules only."
+ ::= { raidControllerEntry 3 }
+
+ raidControllerPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ shutdownInProgress(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the I/O Module is powered on or not.
+ This MIB object is for SAS Controller Modules only."
+ ::= { raidControllerEntry 4 }
+
+ raidControllerMACAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The MAC address for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only."
+ ::= { raidControllerEntry 5 }
+
+ raidControllerSasID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The hardware VPD SAS ID for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only."
+ ::= { raidControllerEntry 6 }
+
+ raidControllerPingRequest OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Sends a ping to the current IP address of the RAID Controller network interface.
+ This MIB object can not be set, if AMM grants I/O Module the Protected Mode
+ permission and the module goes into Protected Mode.
+ NOTE: Value returned for the GET command is meaningless for this MIB object
+ This MIB object is for SAS Controller Modules only."
+ ::= { raidControllerEntry 7 }
+
+ raidControllerNetworkCfg OBJECT IDENTIFIER ::= { raidControllerConfig 2 }
+
+ rcCurrentIPInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RcCurrentIPInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller current IP table.
+ This MIB object is for SAS Controller Modules only."
+ ::= { raidControllerNetworkCfg 1 }
+
+ rcCurrentIPInfoEntry OBJECT-TYPE
+ SYNTAX RcCurrentIPInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller current IP table entry.
+ This MIB object is for SAS Controller Modules only."
+ INDEX { rcCurrentIPInfoIndex }
+ ::= { rcCurrentIPInfoTable 1 }
+
+ RcCurrentIPInfoEntry ::= SEQUENCE {
+ rcCurrentIPInfoIndex INTEGER,
+ rcCurrentIPInfoId INTEGER,
+ rcCurrentIPInfoExists INTEGER,
+ rcCurrentIPInfoPowerState INTEGER,
+ rcCurrentIPAddr IpAddress,
+ rcCurrentSubnetMask IpAddress,
+ rcCurrentGateway IpAddress,
+ rcCurrentIPConfigMethod INTEGER,
+ rcCurrentRaidedVlanId INTEGER
+ }
+
+ rcCurrentIPInfoIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller current IP table index.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 1 }
+
+ rcCurrentIPInfoId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module3(3),
+ module4(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The I/O Module numeric identifier for the RAID Controller.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 2 }
+
+ rcCurrentIPInfoExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the I/O Module exists or not.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 3 }
+
+ rcCurrentIPInfoPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ shutdownInProgress(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the I/O Module is powered on or not.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 4 }
+
+ rcCurrentIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current IP address for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 5 }
+
+
+ rcCurrentSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current subnet mask for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 6 }
+
+ rcCurrentGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current subnet mask for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 7 }
+
+ rcCurrentIPConfigMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ static(1),
+ dhcp(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current IP gateway for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 8 }
+
+ rcCurrentRaidedVlanId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current virtual LAN ID for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only."
+ ::= { rcCurrentIPInfoEntry 9 }
+
+ rcNewIPInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RcNewIPInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller new IP configuration table.
+ This MIB object is for SAS Controller Modules only.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { raidControllerNetworkCfg 2 }
+
+ rcNewIPInfoEntry OBJECT-TYPE
+ SYNTAX RcNewIPInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller new IP configuration information table entry.
+ This MIB object is for SAS Controller Modules only.
+ NOTE: This MIB table is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ INDEX { rcNewIPInfoIndex }
+ ::= { rcNewIPInfoTable 1 }
+
+ RcNewIPInfoEntry ::= SEQUENCE {
+ rcNewIPInfoIndex INTEGER,
+ rcNewIPInfoId INTEGER,
+ rcNewIPInfoExists INTEGER,
+ rcNewIPInfoPowerState INTEGER,
+ rcNewIPAddr IpAddress,
+ rcNewSubnetMask IpAddress,
+ rcNewGateway IpAddress,
+ rcNewIPConfigMethod INTEGER,
+ rcNewIPConfigEnableDisable INTEGER
+ }
+
+ rcNewIPInfoIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "RAID Controller new IP configuration information index.
+ This MIB object is for SAS Controller Modules only.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 1 }
+
+ rcNewIPInfoId OBJECT-TYPE
+ SYNTAX INTEGER {
+ module3(3),
+ module4(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The I/O Module numeric identifier for the RAID Controller.
+ This MIB object is for SAS Controller Modules only.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 2 }
+
+ rcNewIPInfoExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the I/O Module exists or not.
+ This MIB object is for SAS Controller Modules only.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 3 }
+
+ rcNewIPInfoPowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ shutdownInProgress(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the I/O Module is powered on or not.
+ This MIB object is for SAS Controller Modules only.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 4 }
+
+ rcNewIPAddr OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The new IP address for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only. Before setting this object to a new value,
+ rcNewIpconfigEnableDisable object must first be set to disabled.
+ NOTE: This MIB object can not be set if the AMM grants the I/O Module Protected Mode
+ permission and the module goes into Protected Mode.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 5 }
+
+
+ rcNewSubnetMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The new subnet mask for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only. Before setting this object to a new value,
+ rcNewIpconfigEnableDisable object must first be set to disabled.
+ NOTE: This MIB object can not be set if the AMM grants the I/O Module Protected Mode
+ permission and the module goes into Protected Mode.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 6 }
+
+ rcNewGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The new IP gateway for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only. Before setting this object to a new value,
+ rcNewIpconfigEnableDisable object must first be set to disabled.
+ NOTE: This MIB object can not be set if the AMM grants the I/O Module Protected Mode
+ permission and the module goes into Protected Mode.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 7 }
+
+ rcNewIPConfigMethod OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ static(1),
+ dhcp(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The new IP configuration method for the RAID Controller network interface.
+ This MIB object is for SAS Controller Modules only. Before setting this object to a new value,
+ rcNewIpconfigEnableDisable object must first be set to disabled.
+ NOTE: The value 'DHCP' can not be used to set.
+ NOTE: This MIB object can not be set if the AMM grants the I/O Module Protected Mode
+ permission and the module goes into Protected Mode.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 8 }
+
+ rcNewIPConfigEnableDisable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disable(0),
+ enable(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A set command enables new IP configurations that have been defined.
+ A get command indicates whether new IP configurations that have been enabled.
+ NOTE: This MIB object can not be set if the AMM grants the I/O Module Protected Mode
+ permission and the module goes into Protected Mode.
+ NOTE: This MIB object is not applicable to modules that are running in Network Address
+ Translation (NAT) Mode."
+ ::= { rcNewIPInfoEntry 11 }
+
+ chassisTopology OBJECT IDENTIFIER ::= { blades 4 }
+
+ chassisResponseVersion OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis response version."
+ ::= { chassisTopology 1 }
+
+ chassisFlags OBJECT-TYPE
+ SYNTAX INTEGER {
+ serverBlade(1),
+ rackOrStandAlone(0)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis flags.
+ 1 = a server blade chassis, 0 = a rack or standalone chassis."
+ ::= { chassisTopology 2 }
+
+ chassisName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the active MM as a null terminated string."
+ ::= { chassisTopology 3 }
+
+ chassisNoOfFPsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of fan packs (FPs) supported.
+
+ NOTE: Fan packs are also referred to as Power Module Cooling Devices."
+ ::= { chassisTopology 18 }
+
+ chassisNoOfPBsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of processor blades (PBs) supported."
+ ::= { chassisTopology 19 }
+
+ chassisNoOfSMsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of switch modules (SMs) supported."
+ ::= { chassisTopology 20 }
+
+ chassisNoOfMMsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of management modules (MMs) supported."
+ ::= { chassisTopology 21 }
+
+ chassisNoOfPMsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of power modules (PMs) supported."
+ ::= { chassisTopology 22 }
+
+ chassisNoOfMTsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of media trays (MTs) supported."
+ ::= { chassisTopology 23 }
+
+ chassisNoOfBlowersSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of blowers supported.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { chassisTopology 24 }
+
+ chassisPBsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blades that are installed on the chassis.
+ The blades are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blades supported. If a blade is installed in a
+ bay, a 1 is present in the string in the position representing
+ the bay ID as read from left to right. For example, if blades
+ are installed in bays 1, 5, and 13, and 14 blades are supported,
+ the string would look like '10001000000010'."
+ ::= { chassisTopology 25 }
+
+ chassisSMsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The switch modules that are installed on the chassis.
+ The switch modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of switch modules supported. If a switch module is
+ installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if switch modules are installed in bays 1 and 3, and 4 switch modules
+ are supported, the string would look like '1011' for BladeCenter and
+ BladeCenter T and '1011000000' for BladeCenter H and BladeCenter HT."
+ ::= { chassisTopology 29 }
+
+ chassisMMsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The management modules that are installed on the chassis.
+ The management modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as the
+ number of management modules supported. If a management module is installed
+ in a bay, a 1 is present in the string in the position representing
+ the bay ID as read from left to right. For example, if a management module
+ is installed in bay 1, and 2 management modules are supported, the
+ string would look like '10'."
+ ::= { chassisTopology 30 }
+
+ chassisPMsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The power modules that are installed on the chassis.
+ The power modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of power modules supported. If a power module is
+ installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if power modules are installed in bays 1 and 3, and 4 power modules
+ are supported, the string would look like '1010'."
+ ::= { chassisTopology 31 }
+
+ chassisMTInstalled OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether at least one media tray (MT) is installed."
+ ::= { chassisTopology 32 }
+
+
+ chassisBlowersInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blowers that are installed on the chassis.
+ The blowers are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of blowers supported. If a blower is installed in a
+ bay, a 1 is present in the string in the position representing
+ the bay ID as read from left to right. For example, if a blower
+ is installed in bay 1, and 2 blowers are supported, the string
+ would look like '10'.
+
+ NOTE: Blowers are also referred to as Chassis Cooling Devices."
+ ::= { chassisTopology 33 }
+
+ chassisActiveMM OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The active management module (MM)."
+ ::= { chassisTopology 34 }
+
+ chassisKVMOwner OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade that currently owns the keyboard/video/monitor (KVM).
+ 0 = the KVM devices are owned by the management module."
+ ::= { chassisTopology 35 }
+
+ chassisMediaTrayOwner OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The blade that currently owns the media tray.
+ 0 = the media tray is owned by the management module."
+ ::= { chassisTopology 36 }
+
+ chassisFPsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The fan packs that are installed on the chassis.
+ The fan packs are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of fan packs supported. If a fan pack is
+ installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if fan packs are installed in bays 1 and 3, and 4 fan packs
+ are supported, the string would look like '1010'.
+
+ NOTE: Fan packs are also referred to as Power Module Cooling Devices."
+ ::= { chassisTopology 37 }
+
+ chassisType OBJECT-TYPE
+ SYNTAX INTEGER {
+ bladeCenterOrBladeCenterH(97),
+ bladeCenterTOrBladeCenterHT(98)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The type of the chassis. The BladeCenterS chassis and BladeCenterE are part of the
+ bladeCenterOrBladeCenterH type. This MIB object should be used in conjunction
+ with chassisSubType MIB object to determine the characteristic of the chassis."
+ ::= { chassisTopology 38 }
+
+ chassisSubtype OBJECT-TYPE
+ SYNTAX INTEGER {
+ bladeCenterOrBladeCenterT(0),
+ bladeCenterHOrBladeCenterHT(2),
+ bladeCenterS(3),
+ bladeCenterE(4),
+ bladeCenterH(5),
+ bladeCenterT(32),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The subtype of the chassis. This MIB object should be used in conjunction with
+ chassisType MIB object to determine the characteristic of the chassis."
+ ::= { chassisTopology 39 }
+
+ -- ********************************************************************************
+
+ chassisNoOfFBsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of Front Bezel (FBs) supported."
+ ::= { chassisTopology 40 }
+
+ chassisNoOfAPsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of Alarm Panel (APs) supported."
+ ::= { chassisTopology 41 }
+
+ chassisNoOfNCsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Number of Network Clocks (NCs) supported."
+ ::= { chassisTopology 42 }
+
+ chassisNoOfMXsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of Multiplexer Expansion modules (MXs) supported."
+ ::= { chassisTopology 43 }
+
+ chassisNoOfMMIsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of management module interposers (MMIs) supported."
+ ::= { chassisTopology 44 }
+
+ chassisNoOfSMIsSupported OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Number of switch module interposers (SMIs) supported."
+ ::= { chassisTopology 45 }
+
+
+ chassisNoOfFBsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The return value of '1'indicates the front bezel is installed on the chassis.
+ The value of '0' indicates the front bezel is not installed."
+ ::= { chassisTopology 46 }
+
+ chassisNoOfAPsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The return value of '1'indicates the alarm panel is installed on the chassis.
+ The value of '0' indicates the alarm panel is not installed."
+ ::= { chassisTopology 47 }
+
+ chassisNoOfNCsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "The network clock cards that are installed on the chassis.
+ The network clock cards are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of network clock cards supported. If a network clock
+ card is installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if a network clock card is installed in bays 1, and 2 network clock cards
+ are supported, the string would look like '10'."
+ ::= { chassisTopology 48 }
+
+ chassisNoOfMXsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Multiplexer Expansion Modules that are installed on the chassis.
+ The Multiplexer Expansion Modules are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as the number of
+ Multiplexer Expansion Modules supported. If a Multiplexer Expansion Module
+ is installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if Multiplexer Expansion Module is installed in bays 1, and 2 Multiplexer
+ Expansion Modules are supported, the string would look like '10'."
+ ::= { chassisTopology 49 }
+
+ chassisNoOfMMIsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The flex cables that are installed on the chassis.
+ The flex cables are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of flex cables supported. If a flex cable
+ is installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if flex cable is installed in bays 1, and 2 flex cables are
+ supported, the string would look like '10'."
+ ::= { chassisTopology 50 }
+
+ chassisNoOfSMIsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The interposers that are installed on the chassis.
+ The interposers are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of interposers supported. If an interposer
+ is installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if interposer is installed in bays 1, and 10 interposers are
+ supported, the string would look like '1000000000'."
+ ::= { chassisTopology 51 }
+
+ chassisNoOfMTsInstalled OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The media trays that are installed on the chassis.
+ The media trays are listed as a bitmap. The bitmap is a
+ string containing a list of 1's and 0's that is as long as
+ the number of media trays supported. If a media tray is
+ installed in a bay, a 1 is present in the string in the position
+ representing the bay ID as read from left to right. For example,
+ if media trays are installed in bays 1, and 2 media trays are,
+ the string would look like '10'."
+ ::= { chassisTopology 52 }
+
+
+ -- ********************************************************************************
+ managementModule OBJECT IDENTIFIER ::= { blades 5 }
+ -- ********************************************************************************
+
+ mmStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MmStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the management module status.
+ For consistent results, view as a table and not as individual entries."
+ ::= { managementModule 1 }
+
+ mmStatusEntry OBJECT-TYPE
+ SYNTAX MmStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Management module status entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { mmStatusIndex }
+ ::= { mmStatusTable 1 }
+
+ MmStatusEntry ::= SEQUENCE {
+ mmStatusIndex INTEGER,
+ mmPresent INTEGER,
+ mmExtIpAddress IpAddress,
+ mmPrimary INTEGER,
+ mmHealthState INTEGER
+ }
+
+ mmStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module status index."
+ ::= { mmStatusEntry 1 }
+
+ mmPresent OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module current status."
+ ::= { mmStatusEntry 2 }
+
+ mmExtIpAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module external IP address.
+
+ NOTE: The IPv6 addresses assigned to the AMM may be viewed
+ with the extEthernetInterfaceIPv6 objects"
+ ::= { mmStatusEntry 3 }
+
+ mmPrimary OBJECT-TYPE
+ SYNTAX INTEGER {
+ no(0),
+ yes(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if this Management module is a primary or not.
+ NOTE: If there is no standby MM, this value defaults to primary."
+ ::= { mmStatusEntry 4 }
+
+ mmHealthState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ bad(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The health state for the management module.
+ 0 = unknown, 1 = good, 2 = warning, 3 = bad."
+ ::= { mmStatusEntry 5 }
+
+ -- ********************************************************************************
+ -- Storage Task for configuration
+ -- ********************************************************************************
+ storage OBJECT IDENTIFIER ::= { blades 6 }
+
+ storageStatus OBJECT IDENTIFIER ::= { storage 1 }
+
+ storageStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StorageStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of the storage module status.
+ For consistent results, view as a table and not as individual entries.
+
+ NOTE: This MIB object is for BCS only."
+ ::= { storageStatus 1 }
+
+ storageStatusEntry OBJECT-TYPE
+ SYNTAX StorageStatusEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Storage Module Status Table Entry."
+ INDEX { storageStatusIndex }
+ ::= { storageStatusTable 1 }
+
+ StorageStatusEntry ::= SEQUENCE {
+ storageStatusIndex INTEGER,
+ storageBayNumber OCTET STRING,
+ storageState INTEGER,
+ storageName OCTET STRING
+ }
+
+ storageStatusIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage device status table index."
+ ::= { storageStatusEntry 1 }
+
+ storageBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bay number of the Storage device."
+ ::= { storageStatusEntry 2 }
+
+ storageState OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(0),
+ good(1),
+ warning(2),
+ critical(3),
+ notAvailable(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Storage device state."
+ ::= { storageStatusEntry 3 }
+
+ storageName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the storage device."
+ ::= { storageStatusEntry 4 }
+
+ storageConfiguration OBJECT IDENTIFIER ::= { storage 2 }
+
+ storageSwitchConfiguration OBJECT IDENTIFIER ::= { storageConfiguration 1 }
+
+ -- ********************************************************************************
+ -- Shows details about all possible zone configurations available on all SAS switches
+ -- and allows a user to select one and make it the active zone configuration
+ -- ********************************************************************************
+
+ storageSwitchZoneCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StorageSwitchZoneCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of all the zone configurations stored on switch
+ modules. For consistent results, view as a table and
+ not as individual entries.
+
+ Before activating a new zone configuration via the switchActiveZoneCfg
+ object, a user must consider the following:
+
+ 1) Changing the zone configuration may cause disruption in the storage
+ access of blades connected to this SAS Module. It is highly recommended
+ that you first ensure that the blades have completed all storage accesses.
+ You may want to shutdown the blade OS prior to changing your zone configuration.
+
+ 2) When selecting a zone configuration, ensure that it is appropriate
+ for the number of SAS switches installed in your chassis. This can
+ be determined from the switchZoneCfgDescription text.
+
+ 3) When selecting a zone configuration, ensure that it exists first on
+ all SAS switches. This can be determined by querying the
+ storageSwitchZoneCfgTable. In addition, for user-defined zone
+ configurations, even if the number is the same, ensure that the
+ actual zone configurations are identical or compatible. You will need
+ to use an application, such as the Switch Configuration Manager (SCM)
+ to verify this.
+
+ 4) All SAS switches must be in operational state prior to activating a
+ new zone configuration. This can be determined by querying the
+ activeZoneCfgNumberBySwitch object and ensuring that none of the
+ 2xx codes are returned."
+ ::= { storageSwitchConfiguration 1 }
+
+ storageSwitchZoneCfgEntry OBJECT-TYPE
+ SYNTAX StorageSwitchZoneCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module Zone Configuration Management Entry."
+ INDEX { switchZoneCfgIndex }
+ ::= { storageSwitchZoneCfgTable 1 }
+
+ StorageSwitchZoneCfgEntry ::= SEQUENCE {
+ switchZoneCfgIndex INTEGER,
+ switchZoneCfgBayNumber INTEGER,
+ switchZoneCfgNumber INTEGER,
+ switchZoneCfgStatus INTEGER,
+ switchZoneCfgType INTEGER,
+ switchZoneCfgName OCTET STRING,
+ switchZoneCfgDescription OCTET STRING,
+ switchZoneCfgDate OCTET STRING,
+ switchActiveZoneCfg INTEGER
+ }
+
+ switchZoneCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch module zone configuration table index."
+ ::= { storageSwitchZoneCfgEntry 1 }
+
+ switchZoneCfgBayNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric switch bay number."
+ ::= { storageSwitchZoneCfgEntry 2 }
+
+ switchZoneCfgNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The zone configuration number, also referred to as the
+ configuration store number."
+ ::= { storageSwitchZoneCfgEntry 3 }
+
+ switchZoneCfgStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ nonActive(0),
+ active(1),
+ pending(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The status of the zone configuration.
+
+ Only one configuration is 'Active', others are in 'nonActive'
+ status.
+
+ When a zone configuration is active on a switch, the status
+ may temporarily indicate pending(2) as it transitions from
+ nonActive(0) to active (1)."
+ ::= { storageSwitchZoneCfgEntry 4 }
+
+ switchZoneCfgType OBJECT-TYPE
+ SYNTAX INTEGER {
+ userdefined(1),
+ predefined(2)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The type of the zone configuration. Predefined are read-only
+ static configurations, and userdefined are read-write
+ configurations that can be created and modified using the
+ Switch Configuration Manager application."
+ ::= { storageSwitchZoneCfgEntry 5 }
+
+ switchZoneCfgName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A short descriptive name for the zone configuration."
+ ::= { storageSwitchZoneCfgEntry 6 }
+
+ switchZoneCfgDescription OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A detailed description for the zone configuration."
+ ::= { storageSwitchZoneCfgEntry 7 }
+
+ switchZoneCfgDate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The date the zone configuration was created."
+ ::= { storageSwitchZoneCfgEntry 8 }
+
+ switchActiveZoneCfg OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "An object used to activate a particular zone configuration.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { storageSwitchZoneCfgEntry 9 }
+
+ -- ********************************************************************************
+ -- Shows which zone configuration is currently the active one on each SAS switch.
+ -- ********************************************************************************
+
+ storageSwitchActiveZoneCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF StorageSwitchActiveZoneCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table showing the zone configuration that is currently
+ active on a given switch module. For consistent results,
+ view as a table and not as individual entries."
+ ::= { storageSwitchConfiguration 2 }
+
+ storageSwitchActiveZoneCfgEntry OBJECT-TYPE
+ SYNTAX StorageSwitchActiveZoneCfgEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Active zone configurations Entry."
+ INDEX { activeZoneCfgIndex }
+ ::= { storageSwitchActiveZoneCfgTable 1 }
+
+ StorageSwitchActiveZoneCfgEntry ::= SEQUENCE {
+ activeZoneCfgIndex INTEGER,
+ activeZoneCfgBayNumber OCTET STRING,
+ activeZoneCfgNumberBySwitch INTEGER,
+ activeZoneCfgNumberByMM INTEGER
+ }
+
+ activeZoneCfgIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Active zone configurations table index."
+ ::= { storageSwitchActiveZoneCfgEntry 1 }
+
+ activeZoneCfgBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Bay number of the switch module where active zone configurations exist."
+ ::= { storageSwitchActiveZoneCfgEntry 2 }
+
+ activeZoneCfgNumberBySwitch OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The zone configuration number active on this SAS switch module
+ as reported by the switch module. If this number differs from the
+ value of the activeZoneCfgNumberByMM object for the same
+ switch, this may indicate a configuration problem.
+
+ The zone configuration number is also referred to as the zone
+ configuration store.
+
+ NOTE:
+ 0 = No zone configuration is active on this I/O Module.
+ 253 = I/O module is discovering zone information.
+ 254 = I/O Module is not powered on or in a fault state.
+ 255 = notApplicable."
+ ::= { storageSwitchActiveZoneCfgEntry 3 }
+
+ activeZoneCfgNumberByMM OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The zone configuration number active on this SAS switch module
+ as known by the management module. If this number differs from the
+ value of the activeZoneCfgNumberBySwitch object for the same
+ switch, this may indicate a configuration problem.
+
+ The zone configuration number is also referred to as the zone
+ configuration store.
+
+ NOTE:
+ 0 = No zone configuration is active on this I/O Module.
+ 255 = notApplicable."
+ ::= { storageSwitchActiveZoneCfgEntry 4 }
+
+ -- ********************************************************************************
+ -- A quick means of activating the same zone configuration on all SAS switches.
+ -- ********************************************************************************
+
+ switchZoneCfgActivation OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object provides a quick means of activating a valid zone
+ configuration on all active SAS switches. The zone configuration
+ to be activated is specified as the value of the SET and can be
+ obtained from the switchZoneCfgNumber object.
+
+ The zone configuration number is also referred to as the zone
+ configuration store.
+
+ Before activating a new zone configuration, a user must consider
+ the following:
+
+ 1) Changing the zone configuration may cause disruption in the storage
+ access of blades connected to this SAS Module. It is highly recommended
+ that you first ensure that the blades have completed all storage accesses.
+ You may want to shutdown the blade OS prior to changing your zone configuration.
+
+ 2) When selecting a zone configuration, ensure that it is appropriate
+ for the number of SAS switches installed in your chassis. This can
+ be determined from the switchZoneCfgDescription text.
+
+ 3) When selecting a zone configuration, ensure that it exists first on
+ all SAS switches. This can be determined by querying the
+ storageSwitchZoneCfgTable. In addition, for user-defined zone
+ configurations, even if the number is the same, ensure that the
+ actual zone configurations are identical or compatible. You will need
+ to use an application, such as the Switch Configuration Manager (SCM)
+ to verify this.
+
+ 4) All SAS switches must be in operational state prior to activating a
+ new zone configuration. This can be determined by querying the
+ activeZoneCfgNumberBySwitch object and ensuring that none of the
+ 2xx codes are returned.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object.
+
+ If any of the switches are not activated, an error response
+ will be returned."
+ ::= { storageSwitchConfiguration 3 }
+
+ -- ********************************************************************************
+ -- Firmware Image Information - currently for Iswitches that support multiple images
+ -- ********************************************************************************
+ firmwareInformation OBJECT IDENTIFIER ::= { blades 8 }
+
+ smFirmwareInformation OBJECT IDENTIFIER ::= { firmwareInformation 1 }
+
+ smFirmwareInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmFirmwareInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module firmware image information.
+ This table is only applicable to modules that support multiple images"
+ ::= { smFirmwareInformation 1 }
+
+ smFirmwareInfoEntry OBJECT-TYPE
+ SYNTAX SmFirmwareInfoEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module firmware image information table entry"
+ INDEX { smFirmwareInfoIndex }
+ ::= { smFirmwareInfoTable 1 }
+
+ SmFirmwareInfoEntry ::= SEQUENCE {
+ smFirmwareInfoIndex INTEGER,
+ smFirmwareInfoModIndex INTEGER,
+ smFirmwareInfoImageIndex INTEGER,
+ smFirmwareInfoImageName OCTET STRING
+ }
+
+ smFirmwareInfoIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Sequence index in the firmware table."
+ ::= { smFirmwareInfoEntry 1 }
+
+ smFirmwareInfoModIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module number."
+ ::= { smFirmwareInfoEntry 2 }
+
+ smFirmwareInfoImageIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module firmware image index."
+ ::= { smFirmwareInfoEntry 3 }
+
+ smFirmwareInfoImageName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Switch Module firmware image name"
+ ::= { smFirmwareInfoEntry 4 }
+
+ -- ********************************************************************************
+ -- Firmware update for MM, Switch modules, and blades
+ -- ********************************************************************************
+ firmwareUpdate OBJECT IDENTIFIER ::= { blades 9 }
+
+ firmwareUpdateTarget OBJECT-TYPE
+ SYNTAX INTEGER {
+ managementModule(0),
+ switchModule1(11),
+ switchModule2(12),
+ switchModule3(13),
+ switchModule4(14),
+ switchModule5(15),
+ switchModule6(16),
+ switchModule7(17),
+ switchModule8(18),
+ switchModule9(19),
+ switchModule10(20),
+ blade1(31),
+ blade2(32),
+ blade3(33),
+ blade4(34),
+ blade5(35),
+ blade6(36),
+ blade7(37),
+ blade8(38),
+ blade9(39),
+ blade10(40),
+ blade11(41),
+ blade12(42),
+ blade13(43),
+ blade14(44),
+ unknown(255)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Target module whose firmware will be updated.
+ NOTE: Some switch modules do not allow firmware update.
+ When firmware update is attempted on those switch modules,
+ the agent will report an error."
+ ::= { firmwareUpdate 1 }
+
+ firmwareUpdateTftpServer OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..63))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If flashing via the legacy method using a tftp server, then
+ set the IP address or host name of the TFTP server where
+ the firmware file resides. The address must be entered in a
+ dotted decimal IP string (e.g. 9.37.44.2).
+
+ NOTE: IPv6 numeric addresses must be enclosed with brackets
+ (e.g. [fe80::5652:ff:fe50:53b6])."
+ ::= { firmwareUpdate 2 }
+
+ firmwareUpdateFileName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..254))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "File name of the firmware file."
+ ::= { firmwareUpdate 3 }
+
+ firmwareUpdateStart OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1),
+ execute-with-reboot(2),
+ execute-nowait(3),
+ execute-with-reboot-nowait(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Start updating the firmware of the specified target module.
+ Using execute or execute-with-reboot will cause the SNMP client to
+ wait for the firmware update to complete.
+ Using execute-nowait or execute-with-reboot-nowait will not cause
+ the SNMP client to wait for the update to complete. Instead it will
+ flash the firmware in the background.
+
+ Note 1: If the execute-with-reboot or execute-with-reboot-nowait
+ option is selected, the target will reset after a successful flash.
+ This option is only valid if the firmwareUpdateTarget object is
+ set to managementModule.
+ Note 2: If flashing from a remote file, then both
+ firmwareUpdateServer and firmwareUpdateFileName must be
+ set. Otherwise if flashing via the legacy method using a tftp
+ server, then both firmwareUpdateTftpServer and
+ firmwareUpdateFileName must be set.
+ Note 3: Depending on the target, it might take up to several
+ minutes for the flash update to complete. Do not reset the
+ target until the control has been returned. At this point,
+ the results will be displayed.
+ Note 4: Use firmwareUpdateStatus to confirm the status of
+ the last firmware update initiated by SNMP method. The
+ Management Module must be restarted for the new firmware to
+ take affect.
+ Note 5: If data encryption is currently enabled on this MM,
+ and you update the MM firmware to a level which does not
+ support data encryption, you will lose all your configuration
+ settings as a result.
+ Note 6: Since some I/O Module types use the AMM TFTP server for
+ firmware file transfer during the firmware update process, the
+ tftpEnable MIB object must be set to enable prior to updating
+ the firmware for these modules.
+ Note 7: If IPv6 address(es) have been configured for one or more
+ interfaces/protocols/services on this AMM, when you update
+ the firmware to a level which does not support IPv6, all IPv6
+ connectivity will be lost, and services/interfaces for which an IPv6
+ address was configured may not function properly. You will be required
+ to reconfigure these services/interfaces.
+
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { firmwareUpdate 4 }
+
+ firmwareUpdateStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Get the status of the last firmware update which was
+ initiated through SNMP method."
+ ::= { firmwareUpdate 5 }
+
+ standbyFirmwareUpdateStatus OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Get the current status of the firmware update for the standby AMM.
+
+ NOTE: This only applies to systems with a standby AMM."
+ ::= { firmwareUpdate 6 }
+
+ firmwareImageNumber OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If the module can upload more than one image, an image
+ number must be specified after setting the firmware target.
+ Please refer to the firmwareInformation section."
+ ::= { firmwareUpdate 7 }
+
+ firmwareActiveImage OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "If the module can upload more than one image, an active image
+ number must be specified. Please refer to the firmwareInformation section.
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object."
+ ::= { firmwareUpdate 8 }
+
+ firmwareUpdateServer OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..254))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Contains the fully qualified remote location of the firmware
+ packet file. Use firmwareUpdateFileName to specify the filename.
+
+ A fully qualified remote location contains a supported
+ protocol followed by a colon and two slashes (//), userid and
+ password separated by a colon for login authentication, an
+ @ sign, followed by the hostname or IP address of the
+ server where the packet file resides, followed by an optional
+ port number to the hostname, and the full pathname to the file.
+ Note that if the port number is specified, it must be
+ separated with the hostname (or IP address) by a colon.
+
+ The AMM currently supports the following protocols:
+ TFTP, FTP, FTPS, HTTP and HTTPS.
+
+ The complete format of a fully qualified remote location is:
+
+ <protocol>://<userid:password>@<hostname:port>/<pathname>
+
+ An example of a fully qualified remote location can be:
+ ftp://USERID:PASSW0RD@192.168.0.2:30045/tmp
+ where the ftp protocol will be used for transferring the file in
+ this location, username is USERID, password is
+ PASSW0RD, host IP address is 192.168.0.2, port number is
+ 30045, and the full pathname for the packet file is /tmp.
+
+ and firmwareUpdateFileName is set to: CNETCMUS.pkt
+
+ Some protocols do not need the username, password, and
+ the port number, so the minimum requirement for a fully
+ qualified location can be: <protocol>://<hostname>/<pathname>."
+ ::= { firmwareUpdate 9 }
+
+ -- ********************************************************************************
+ -- mm Discovery
+ -- ********************************************************************************
+ remoteChassis OBJECT IDENTIFIER ::= { blades 10 }
+
+ remoteChassisTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RemoteChassisEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of remote chassis information."
+ ::= { remoteChassis 1 }
+
+ remoteChassisEntry OBJECT-TYPE
+ SYNTAX RemoteChassisEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Remote chassis entry"
+ INDEX { remoteChassisIndex }
+ ::= { remoteChassisTable 1 }
+
+ RemoteChassisEntry ::= SEQUENCE {
+ remoteChassisIndex INTEGER,
+ systemName OCTET STRING,
+ systemStatus INTEGER,
+ mmType OCTET STRING,
+ mmSerial OCTET STRING,
+ mmFru OCTET STRING,
+ mmIp OCTET STRING,
+ chassisSerial OCTET STRING,
+ chassisFru OCTET STRING,
+ chassisMachineTypeMode OCTET STRING,
+ chassisUuid OCTET STRING,
+ firmwareVersion OCTET STRING,
+ ipStatus INTEGER,
+ ipv6Addresses OCTET STRING
+ }
+
+
+ remoteChassisIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Remote chassis discovery sequence index."
+ ::= { remoteChassisEntry 1 }
+
+ systemName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System name for this discovery management module."
+ ::= { remoteChassisEntry 2 }
+
+ systemStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ critical(0),
+ non-Critical(2),
+ system-Level(4),
+ unknown(9),
+ noResponse(170),
+ normal(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System status summary (chassis)."
+ ::= { remoteChassisEntry 3 }
+
+ mmType OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Service processor type."
+ ::= { remoteChassisEntry 4 }
+
+ mmSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module serial number."
+ ::= { remoteChassisEntry 5 }
+
+ mmFru OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Management module Field-Replaceable number."
+ ::= { remoteChassisEntry 6 }
+
+ mmIp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv4 compliant address of the management module."
+ ::= { remoteChassisEntry 7}
+
+
+ chassisSerial OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis serial number."
+ ::= { remoteChassisEntry 8 }
+
+ chassisFru OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis Field-Replaceable number."
+ ::= { remoteChassisEntry 9 }
+
+ chassisMachineTypeMode OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis machine type and model number."
+ ::= { remoteChassisEntry 10 }
+
+ chassisUuid OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Chassis unique identifier."
+ ::= { remoteChassisEntry 11 }
+
+
+ firmwareVersion OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Firmware version of the discovery management module."
+ ::= { remoteChassisEntry 12 }
+ ipStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipv4(1),
+ ipv6(2),
+ both(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A flag to state if IPv4 and IPv6 are enabled"
+ ::= { remoteChassisEntry 13 }
+ ipv6Addresses OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The IPv6 addresses configured for the chassis."
+ ::= { remoteChassisEntry 14 }
+
+ chassisDiscovery OBJECT-TYPE
+ SYNTAX INTEGER{
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Discovery of remote Chassis.
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { remoteChassis 2}
+
+ -- ********************************************************************************
+ -- Local file management
+ -- ********************************************************************************
+ fileManagement OBJECT IDENTIFIER ::= { blades 11 }
+
+ fileTopology OBJECT IDENTIFIER ::= { fileManagement 1 }
+
+ currentDirectory OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Specifies the directory name for listing the requested files."
+ ::= { fileTopology 1 }
+
+ fileDetailsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF FileDetailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table of all the files in the specified directory.
+ For consistent results, view as a table and not as individual entries."
+ ::= { fileTopology 2 }
+
+ fileDetailsEntry OBJECT-TYPE
+ SYNTAX FileDetailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "File details entry.
+ For consistent results, view as a table and not as individual entries."
+ INDEX { fileIndex }
+ ::= { fileDetailsTable 1 }
+
+ FileDetailsEntry ::= SEQUENCE {
+ fileIndex INTEGER,
+ fileName OCTET STRING,
+ fileLastUpdate OCTET STRING,
+ fileSize OCTET STRING
+ }
+
+ fileIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "File sequence index."
+ ::= { fileDetailsEntry 1 }
+
+ fileName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "File name."
+ ::= { fileDetailsEntry 2 }
+
+ fileLastUpdate OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Date of the latest file update."
+ ::= { fileDetailsEntry 3 }
+
+ fileSize OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "File size in bytes."
+ ::= { fileDetailsEntry 4 }
+
+ fileManagementCmd OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This field will execute the selected operations on the files.
+ The following operation is supported:
+ DEL name - delete a file
+
+ Examples:
+ - to delete the file named switch.config in tftproot directory
+ set the value to 'DEL tftproot/switch.config'
+
+ NOTE: Value returned for the GET command is meaningless for this
+ MIB object."
+ ::= { fileManagement 3 }
+
+ fileSystemSpaceAvailable OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This field displays the available space of the AMM file system."
+ ::= { fileManagement 6 }
+
+
+ -- ********************************************************************************
+ -- componentMonitors
+ -- ********************************************************************************
+ componentMonitors OBJECT IDENTIFIER ::= { blades 37 }
+
+
+ -- ********************************************************************************
+ -- componentMACAddressTable
+ -- ********************************************************************************
+ componentMACAddressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ComponentMACAddressEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of MAC address VPD information for each component."
+ ::= { componentMonitors 11 }
+
+ componentMACAddressEntry OBJECT-TYPE
+ SYNTAX ComponentMACAddressEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Component MAC address table entry"
+ INDEX { componentMACAddressTopologyPath, componentMACAddressIndex }
+ ::= { componentMACAddressTable 1 }
+
+ ComponentMACAddressEntry ::= SEQUENCE {
+ componentMACAddressTopologyPath OCTET STRING,
+ componentMACAddressIndex INTEGER,
+ componentMACAddressName OCTET STRING,
+ componentMACAddress OCTET STRING
+ }
+
+ componentMACAddressTopologyPath OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..100))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique identifier for a component in this table. The chassis and each
+ installed component is represented by a hardware topology tree, where
+ each node in the tree represents a component. The path to a particular
+ component consists of one or more <component>,<instance> pairs, where
+ each successive pair is a child of the previous parent pair.
+
+ As an example, the root of the tree is the chassis and is represented
+ by the pair 'CHASSIS, 1'. This pair indicates the first instance of
+ the chassis. If a blade is inserted in slot 4 of the chassis, its
+ topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
+ components in the chassis can be determined along with their relative
+ hierarchy to each other.
+
+ Note that this TP is preceded by a single octet that specifies the TP length.
+ This is required since this table is indexed with two indices and, therefore,
+ the TP length must be explicitly provided.
+
+ This component firmware table is indexed by this unique topology
+ path and the numeric designations for the components are:
+
+ CHASSIS, 0x01 Chassis
+ MM, 0x02 Management Module
+ BLADE, 0x03 Main system board of a blade
+ POWER, 0x04 Power Supply, Power Module, etc
+ COOLING, 0x05 Fan, blower, or other cooling device
+ IO_MODULE, 0x06 Has I/O interface, i.e. - switch or bridge
+ MEDIA, 0x07 Media device
+ PROCESSOR, 0x08 Any processor, processor module, etc
+ STORAGE, 0x09 Any type of storage device
+ EXPANSION, 0x0A Expansion Card (not covered by more specific type)
+ MEMORY, 0x0B Any memory device, module, etc
+ MFRU, 0x0C Managed FRU Device
+ PANEL, 0x0D Any sort of panel device, such as a front panel
+ BLADE_EXPANSION_MODULE, 0x0E Expansion option (BEM) such as PEU, BSE, etc
+ CARD_EXPANSION, 0x0F Expansion card, ie. daughter card
+ CARD_HS_EXPANSION, 0x10 High Speed Expansion card, ie. daughter card
+ INTERPOSER, 0x11 Interposer device
+ CLOCK, 0x12 Clock card
+ MUX, 0x13 Mulitplexer card
+ ADDIN, 0x14 cKVM card & other addin cards
+ STORAGE_MODULE, 0x15 Container of one or more Storage Devices
+ SYS_EXPANSION_CARD, 0x16 Management card
+ BATTERY, 0x17 A single battery
+ BATTERY_MODULE, 0x18 Container of one or more batteries
+ REAR_LED, 0x19 Rear LED card
+ MEMORY_BANK, 0x1A Memory banks
+ AIR_FILTER, 0x1B Filter mechanism (bezel)
+ SERIAL_PORT_MODULE, 0x1C Container of one or more serial ports
+ PARENT, 0x1D Reference to parent for multi-parent support
+ PHY_PORT, 0x1E Physical port
+ IO_EXPANDER, 0x1F RAID card
+ CABLE, 0x20 Cable/Interconnect
+ FAN_MUX 0x29 Fan multiplexer card"
+ ::= { componentMACAddressEntry 1 }
+
+ componentMACAddressIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Each component may have one or more MAC address VPD values
+ associated with it, and this index object identifies the
+ particular instance."
+ ::= { componentMACAddressEntry 2 }
+
+ componentMACAddressName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the component as a null terminated string."
+ ::= { componentMACAddressEntry 3 }
+
+ componentMACAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The MAC address VPD value for this component and index. The
+ value is a null terminated string."
+ ::= { componentMACAddressEntry 4 }
+
+
+ -- ************************************************************************
+ -- FFDC Service
+ -- ************************************************************************
+
+ serviceConfig OBJECT IDENTIFIER ::= { service 1 }
+
+ debugEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS deprecated
+ DESCRIPTION
+ "Disable/Enable AMM debugging with USB key by service personnel."
+ ::= { serviceConfig 3 }
+
+ bladeServiceData OBJECT IDENTIFIER ::= { service 3 }
+
+
+ bladeServiceDataTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeServiceDataEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade service data information."
+ ::= { bladeServiceData 1 }
+
+ bladeServiceDataEntry OBJECT-TYPE
+ SYNTAX BladeServiceDataEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Blade service data entry"
+ INDEX { serviceDataIndex }
+ ::= { bladeServiceDataTable 1 }
+
+
+ BladeServiceDataEntry ::= SEQUENCE {
+ serviceDataIndex INTEGER,
+ serviceDataBladeId INTEGER,
+ serviceDataBladeExists INTEGER,
+ serviceDataBladePowerState INTEGER,
+ serviceDataBladeName OCTET STRING,
+ serviceDataBladeCapability INTEGER,
+ serviceDataDumpInitiate INTEGER,
+ serviceDataDumpRetrieve INTEGER,
+ serviceDataDumpCapabilityMask OCTET STRING,
+ serviceDataDumpInProgress INTEGER
+ }
+
+ serviceDataIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Blade service date index."
+ ::= { bladeServiceDataEntry 1 }
+
+ serviceDataBladeId OBJECT-TYPE
+ SYNTAX INTEGER {
+ blade1(1),
+ blade2(2),
+ blade3(3),
+ blade4(4),
+ blade5(5),
+ blade6(6),
+ blade7(7),
+ blade8(8),
+ blade9(9),
+ blade10(10),
+ blade11(11),
+ blade12(12),
+ blade13(13),
+ blade14(14)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The numeric blade ID."
+ ::= { bladeServiceDataEntry 2 }
+
+ serviceDataBladeExists OBJECT-TYPE
+ SYNTAX INTEGER {
+ false(0),
+ true(1)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade specified exists or not."
+ ::= { bladeServiceDataEntry 3 }
+
+ serviceDataBladePowerState OBJECT-TYPE
+ SYNTAX INTEGER {
+ off(0),
+ on(1),
+ standby(3),
+ hibernate(4),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade specified is powered on or not.
+ If the AMM is experiencing a communication problem with the blade,
+ the state may be returned as unknown(255)"
+ ::= { bladeServiceDataEntry 4 }
+
+ serviceDataBladeName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the blade as a string."
+ ::= { bladeServiceDataEntry 5 }
+
+ serviceDataBladeCapability OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "Indicates whether the blade has the capability to trigger service data.
+ NOTE: This Mib object is deprecated and no longer supported.
+ Please see serviceDataBladeCapabilityMask OID"
+ ::= { bladeServiceDataEntry 6 }
+
+ serviceDataDumpInitiate OBJECT-TYPE
+ SYNTAX INTEGER {
+ processorDump(1),
+ platformDump(2),
+ partitionDump(3),
+ serviceData(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Initiates a type of dump collection to be initiated for the blade.
+
+ NOTE: Not all blades support this, please check serviceDataDumpCapabilityMask
+ OID to see if the action is supported on this blade. Only one file can be moved
+ to the'/service' directory at a time, please look over fileManagement OID
+ to check if the file has been compeleted.
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladeServiceDataEntry 7 }
+
+ serviceDataDumpRetrieve OBJECT-TYPE
+ SYNTAX INTEGER {
+ processorDump(1),
+ platformDump(2),
+ partitionDump(3),
+ serviceData(4)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Retrieve a type of service data file from blade to AMM.
+
+ NOTE: This OID only is valid for the last four bit mask designations listed
+ in the serviceDataDumpCapabilityMask OID. Only one file can be moved to
+ the '/service' directory at a time, please look over fileManagement OID
+ to check if the file has been compeleted.
+ NOTE: Value returned for the GET command is meaningless
+ for this MIB object."
+ ::= { bladeServiceDataEntry 8 }
+
+ serviceDataDumpCapabilityMask OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade has the capability to trigger service data and if so,
+ which operations are supported and whether the file can be transferred to the AMM
+ from the blade.
+ The values and meanings are as follows:
+ 0000 0000 means this blade does not support any at all.
+
+ 0000 0001 means this blade supports 'processor' type and the file remains on the blade.
+ 0000 0010 means this blade supports 'platform' type and the file remains on the blade
+ 0000 0100 means this blade supports 'partition' type and the file remians on the blade
+
+ 0000 1000 means this blade supports 'processor' type and the file can be transferred to the AMM.
+ 0001 0000 means this blade supports 'platform' type and the file can be transferred to the AMM.
+ 0010 0000 means this blade supports 'partition' type and the file can be transferred to the AMM
+ 0100 0000 means this blade supports 'serviceData' type and the file can be transferred to the AMM
+
+ For example, the returned value of 01111000 means this blade supports 'processor','platform',
+ 'partition' and 'serviceData' types, and the file can be transferred to the AMM"
+ ::= { bladeServiceDataEntry 9 }
+
+ serviceDataDumpInProgress OBJECT-TYPE
+ SYNTAX INTEGER {
+ inProgress(1),
+ notInProgress(2),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "An indicator as to whether a blade dump is in progress for the specified blade.
+ This object ONLY applies to dumps that can be triggered by the AMM and where the
+ dump file is transferred to the AMM filesystem upon completion. See the
+ serviceDataDumpCapabilityMask object for support levels. The flag that this MIB object
+ represents will be set on when the IPMI command is sent to the blade indicating 'init dump'
+ and will be cleared upon receiving the valid dump file from the blade or the
+ creation of the text file indicating the problem encountered.
+ If it cannot be determined if the dump is in progress, the unknown(255) value is returned."
+ ::= { bladeServiceDataEntry 10 }
+
+
+ bladeSystemReferenceCodes OBJECT IDENTIFIER ::= { bladeServiceData 3 }
+ bladeSysRefCodesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeSysRefCodesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of blade system reference codes."
+ ::= { bladeSystemReferenceCodes 1 }
+
+ bladeSysRefCodesEntry OBJECT-TYPE
+ SYNTAX BladeSysRefCodesEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Boot sequence entry"
+ INDEX { sysRefCodeIndex }
+ ::= { bladeSysRefCodesTable 1 }
+
+ BladeSysRefCodesEntry ::= SEQUENCE {
+ sysRefCodeIndex INTEGER,
+ sysRefCodeBayNumber OCTET STRING,
+ sysRefCodeSequence INTEGER,
+ sysRefCode OCTET STRING,
+ sysRefCodeTimestamp OCTET STRING
+ }
+
+ sysRefCodeIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System reference codes index."
+ ::= { bladeSysRefCodesEntry 1 }
+
+ sysRefCodeBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The bay number of the blade which has the system reference code."
+ ::= { bladeSysRefCodesEntry 2 }
+
+ sysRefCodeSequence OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates whether the blade specified exists or not."
+ ::= { bladeSysRefCodesEntry 3 }
+
+ sysRefCode OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Unique ID and system reference code for the blade."
+ ::= { bladeSysRefCodesEntry 4 }
+
+ sysRefCodeTimestamp OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Timestamp of system reference code for the blade."
+ ::= { bladeSysRefCodesEntry 5 }
+
+ bladeSysRefCodesDetailsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BladeSysRefCodesDetailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of details of blade system reference codes."
+ ::= { bladeSystemReferenceCodes 2 }
+
+ bladeSysRefCodesDetailsEntry OBJECT-TYPE
+ SYNTAX BladeSysRefCodesDetailsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Boot sequence entry"
+ INDEX { sysRefCodeDetailIndex }
+ ::= { bladeSysRefCodesDetailsTable 1 }
+
+ BladeSysRefCodesDetailsEntry ::= SEQUENCE {
+ sysRefCodeDetailIndex INTEGER,
+ sysRefCodeDetailBayNumber OCTET STRING,
+ sysRefCodeDetailSRCSequence INTEGER,
+ sysRefCodeDetailSequence OCTET STRING,
+ sysRefCodeDetailDataString OCTET STRING
+ }
+
+ sysRefCodeDetailIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "System reference codes index."
+ ::= { bladeSysRefCodesDetailsEntry 1 }
+
+ sysRefCodeDetailBayNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The bay number of the blade which has the details
+ of system reference code."
+ ::= { bladeSysRefCodesDetailsEntry 2 }
+
+ sysRefCodeDetailSRCSequence OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A sequence of the system reference codes for the blade."
+ ::= { bladeSysRefCodesDetailsEntry 3 }
+
+
+ sysRefCodeDetailSequence OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A sequence of the detailed information of the system reference
+ codes for the blade."
+ ::= { bladeSysRefCodesDetailsEntry 4 }
+
+ sysRefCodeDetailDataString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Detailed information of the system reference codes for the blade."
+ ::= { bladeSysRefCodesDetailsEntry 5 }
+
+
+serviceAdvisor OBJECT IDENTIFIER ::= { service 4 }
+
+ autoCallHomeSetup OBJECT IDENTIFIER ::= { serviceAdvisor 1 }
+
+ acceptLicenseAgreement OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Accept Terms and Conditions of AMM Service Advisor. The user will have to accept the terms and conditions
+ before Service Advisor can send diagnostic data to IBM support personnel. If AMM configuration
+ is reset to defaults, the user will have to accept the terms and conditions again before they can
+ enable Service Advisor. For more information, please refer to the IBM BladeCenter User's Guide.
+
+ A GET of this object may return disabled(0) or enabled(1), depending upon the current state. However,
+ only enabled(1) is accepted on a SET in order to accept the license agreement. A SET of disabled(0)
+ will return noSuchValue and is not allowed."
+ ::= {autoCallHomeSetup 1}
+
+ serviceAdvisorEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable IBM Support. The User Agreement must be accepted and the contact information
+ must be set before the IBM Support function of Service Advisor can be enabled."
+ ::= {autoCallHomeSetup 2}
+
+serviceSupportCenter OBJECT IDENTIFIER ::= {serviceAdvisor 2}
+ ibmSupportCenter OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The country code for the IBM Support Center. 2 character ISO country code."
+ ::= {serviceSupportCenter 1}
+contactInformation OBJECT IDENTIFIER ::= {serviceAdvisor 3}
+
+ companyName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ " The organization/company name of the contact person. 1-30 characters."
+ ::= {contactInformation 1}
+
+ contactName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The name of the contact person.1-30 characters."
+ ::= {contactInformation 2}
+
+ phoneNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The phone of the contact person. 5-30 characters."
+ ::= {contactInformation 3}
+
+ emailAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The email of the contact person. It must contain '@' and dot '.' in form userid@hostname (50 characters maximum).
+ The userid can be alphanumeric characters, '.', '-', or '_' but must begin and end with alphanumeric characters.
+ The hostname can be alphanumeric characters, '.', '-', or '_'. It must contain at least two domain items.
+ Every domain item should begin and end with alphanumeric character, and the last domain item should be 2-20 alphabetic characters."
+ ::= {contactInformation 4}
+
+ address OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The address of the machine location. The information in this field should be of sufficient detail to allow someone to
+ quickly find the chassis when necessary. 1-30 characters."
+ ::= {contactInformation 5}
+
+ city OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The city of the machine location. 1-30 characters."
+ ::= {contactInformation 6}
+
+ state OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The state of the machine location. 2-3 characters."
+ ::= {contactInformation 7}
+
+
+
+ postalCode OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The postal code of the location for this system. 1-9 characters, only alphanumeric characters are valid."
+ ::= {contactInformation 8}
+
+ phoneNumberExt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The extension of the phone. 30 characters maximum."
+ ::= {contactInformation 10}
+
+ altContactName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "(Optional) The name of the alternate contact person.1-30 characters."
+ ::= {contactInformation 11}
+
+ altPhoneNumber OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "(Optional) The phone of the alternate contact person. 5-30 characters."
+ ::= {contactInformation 12}
+
+ altPhoneNumberExt OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "(Optional) The extension of the alternate phone. 30 characters maximum."
+ ::= {contactInformation 13}
+
+ altEmailAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "(Optional) The email of the alternate contact person. It must contain '@' and dot '.' in form userid@hostname (50 characters maximum).
+ The userid can be alphanumeric characters, '.', '-', or '_' but must begin and end with alphanumeric characters.
+ The hostname can be alphanumeric characters, '.', '-', or '_'. It must contain at least two domain items.
+ Every domain item should begin and end with alphanumeric character, and the last domain item should be 2-20 alphabetic characters."
+ ::= {contactInformation 14}
+
+ machineLocPhone OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "(Optional) The contact phone number of the machine location. 5-30 characters."
+ ::= {contactInformation 15}
+
+httpProxyConfig OBJECT IDENTIFIER ::= {serviceAdvisor 4}
+
+ httpProxyEnable OBJECT-TYPE
+ SYNTAX INTEGER{
+ disabled(0),
+ enabled(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Disable/Enable of the HTTP Proxy. Select Enable to use the proxy for call home
+ connections from the AMM to IBM. HTTP Proxy is used by the AMM when it is not connected to the internet directly."
+ ::= {httpProxyConfig 1}
+
+ httpProxyLocation OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Fully qualified host name or IP address of the HTTP Proxy. Maximum of 63 characters."
+ ::= {httpProxyConfig 2}
+
+ httpProxyPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of the HTTP Proxy. An integer value from 1 to 65535."
+ ::= {httpProxyConfig 3}
+
+ httpProxyUserName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "User Name of the HTTP Proxy. A maximum of 30 characters string without spaces."
+ ::= {httpProxyConfig 4}
+
+ httpProxyPassword OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Password of the HTTP Proxy. A maximum of 15 characters string without spaces."
+ ::= {httpProxyConfig 5}
+
+ activityLogs OBJECT IDENTIFIER ::= { serviceAdvisor 5}
+
+
+ activityLogTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ActivityLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "
+ Table of Service Advisor Activity Log entries information. This table displays the last five
+ events that were generated by the system or user that are called home. The entries are displayed in
+ reverse chronological order (most recent call home entry first). For any events that happen with same
+ Date/Time, only one event will be called home. If a call home event that is already in the activity
+ log is triggered again on the same event source, it will not be called home again unless the prior entry has
+ been acknowledged as corrected or 120 hours (5 days) have passed since it initially occurred and was called home. "
+ ::= { activityLogs 1 }
+
+ activityLogEntry OBJECT-TYPE
+ SYNTAX ActivityLogEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "
+ Activity Log table entry. Each entry has the result of the call-home attempt,
+ the service number assigned for the issue by IBM support, the event ID, event source, date and
+ time that event occured, and a text message.
+ "
+ INDEX { activityLogIndex }
+ ::= { activityLogTable 1 }
+
+
+ ActivityLogEntry ::= SEQUENCE {
+ activityLogIndex INTEGER,
+ activityLogString OCTET STRING,
+ activityLogAcknowledge INTEGER,
+ activityLogAttribute OCTET STRING
+ }
+
+
+ activityLogIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Activity Log index number.
+ For consistent results, view as a table and not as individual entries."
+ ::= { activityLogEntry 1 }
+
+ activityLogString OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string of data detailing one Activity Log entry. The text message is from the original entry in the event log.
+
+ For consistent results, view as a table and not as individual entries."
+ ::= { activityLogEntry 2 }
+
+ activityLogAcknowledge OBJECT-TYPE
+ SYNTAX INTEGER{
+ no(0),
+ yes(1) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The acknowledgement of one Activity Log entry as corrected. This field allows the users to set a reminder next to
+ certain events to indicate their awareness of the issue. Checking the acknowledge flag will not cause the event to be removed
+ from the log or close the ticket at IBM support. This log is not cleared, so the acknowledge flag can be used to indicate a problem
+ can be ignored. This field can be also used to override the 120 hour (5 day) filtering of reports via IBM Support or FTP/TFTP Server
+ of Service Data.
+ For consistent results, view as a table and not as individual entries."
+ ::= { activityLogEntry 3 }
+
+ activityLogAttribute OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "
+ A string of data detailing one Activity Log entry's attribute. It contains states of both calling IBM support and FTP/TFTP Server.
+ A PENDING indicates that the system is preparing for the event to be called home by collecting data about the systems state. A SUCCESS state
+ indicates that the problem was successfully transmitted to IBM support or FTP/TFTP Server. A DISABLED state indicates that Service Advisor
+ has disabled calling IBM Support or FTP/TFTP Server while the hardware event is detected. A NOT SENT state indicates that the serviceable
+ event was not sent to prevent the same event from being sent repeatedly. The FAILED state indicates that the attempt
+ to transmit the event information was not successful. Additional information may be found in the Event Log.
+ The service number is similar to a ticket number that can be used as a reference to the issue reported by the machine
+ when contacting IBM support. The event ID, event source, date and time are all information from the original entry in the event log.
+ The acknowledged as corrected field is a reminder to certain events to indicate their awareness of the issue.
+
+ For consistent results, view as a table and not as individual entries."
+ ::= { activityLogEntry 4 }
+
+ -- ********************************************************************************
+ -- autoftp
+ -- ********************************************************************************
+ --
+ autoFTPSetup OBJECT IDENTIFIER ::= { service 5 }
+
+ autoFTPCallMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(0),
+ ftp(1),
+ tftp(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This field specifies the automated problem reporting mode. Automated problem reporting mode allows the AMM to automatically put
+ service data to a specified server when a call home event is detected. For any call home events that happen with same Date/Time,
+ only one event will be reported. The system will also wait for an interval of 120 hours (5 days) before another identical event
+ can be sent for the same failed component."
+ ::= { autoFTPSetup 1 }
+
+ autoFTPCallAddr OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This field specifies the remote server address of FTP and TFTP. It should be fully qualified hostname or IP address."
+ ::= { autoFTPSetup 2 }
+ autoFTPCallPort OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This field specifies the port on remote FTP/TFTP server for data transmission."
+ ::= { autoFTPSetup 3 }
+
+ autoFTPCallUserID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This field specifies the user account to login remote FTP server."
+ ::= { autoFTPSetup 4 }
+
+ autoFTPCallPassword OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This field specifies the password to login remote FTP server."
+ ::= { autoFTPSetup 5 }
+
+-- ********************************************************************************
+-- Call Home Exclusion List
+-- ********************************************************************************
+
+callHomeExclusionEvents OBJECT IDENTIFIER ::= { service 6}
+
+
+ readCallHomeExclusionEventTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ReadCallHomeExclusionEventEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of Call Home Exclusion Event entries information."
+ ::= { callHomeExclusionEvents 1 }
+
+ readCallHomeExclusionEventEntry OBJECT-TYPE
+ SYNTAX ReadCallHomeExclusionEventEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Call Home Exclusion Event table entry"
+ INDEX { readCallHomeExclusionEventIndex }
+ ::= { readCallHomeExclusionEventTable 1 }
+
+
+ ReadCallHomeExclusionEventEntry ::= SEQUENCE {
+ readCallHomeExclusionEventIndex INTEGER,
+ readCallHomeExclusionEventID OCTET STRING
+ }
+
+
+ readCallHomeExclusionEventIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The index number of one Call Home Exclusion Event.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readCallHomeExclusionEventEntry 1 }
+
+ readCallHomeExclusionEventID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Event ID of one Call Home Exclusion Event entry.
+ For consistent results, view as a table and not as individual entries."
+ ::= { readCallHomeExclusionEventEntry 2 }
+
+
+ addCallHomeExclusionEvent OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Add one call home Event ID into the Call Home Exclusion List.
+ The Event ID is an 8-digit hexadecimal number (0-F) with an optional prefix of '0x' or '0X'.
+ If Service Advisor Terms and Conditions are accepted, an event can be added into the exclusion list.
+
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { callHomeExclusionEvents 2}
+
+ rmCallHomeExclusionEvent OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remove one call home Event ID from the Call Home Exclusion List.
+ The Event ID is an 8-digit hexadecimal number (0-F) with an optional prefix of '0x' or '0X'.
+ If Service Advisor Terms and Conditions are accepted, an event on the exclusion list can be removed.
+
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { callHomeExclusionEvents 3}
+ rmAllCallHomeExclusionEvent OBJECT-TYPE
+ SYNTAX INTEGER {
+ execute(1)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Remove all Event IDs from the Call Home Exclusion List.
+ If Service Advisor Terms and Conditions are accepted, events on the exclusion list can be removed.
+
+ NOTE: Value returned for the GET command is meaningless for this MIB object."
+ ::= { callHomeExclusionEvents 4}
+
+ -- *************************************************************************
+ -- Scalable Complex Information
+ -- *************************************************************************
+
+ scalableComplexTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ScalableComplexEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of scalable complex information. This table provides information
+ and control actions related to the scalable complexes installed in the
+ chassis. Partition, node and port information and control are defined
+ in their own tables."
+ ::= { scaling 1 }
+
+ scalableComplexEntry OBJECT-TYPE
+ SYNTAX ScalableComplexEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Scalable complex information."
+ INDEX { scalableComplexIdentifier }
+ ::= { scalableComplexTable 1 }
+
+ ScalableComplexEntry ::= SEQUENCE {
+ scalableComplexIdentifier INTEGER,
+ scalableComplexNumPartitions INTEGER,
+ scalableComplexNumNodes INTEGER,
+ scalableComplexPartStartSlot INTEGER,
+ scalableComplexPartNumNodes INTEGER,
+ scalableComplexAction INTEGER
+ }
+
+ scalableComplexIdentifier OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique numeric identifier for a complex installed in the chassis."
+ ::= { scalableComplexEntry 1 }
+
+ scalableComplexNumPartitions OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of partitions currently defined for this complex."
+ ::= { scalableComplexEntry 2 }
+
+ scalableComplexNumNodes OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of nodes existing in this complex, regardless
+ of their assignment to any given partition. The physical
+ slot location of the nodes can be determined from the
+ scalableComplexNodeTable."
+ ::= { scalableComplexEntry 3 }
+
+ scalableComplexPartStartSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The lowest slot number occupied by the nodes in the new partition that
+ is being created via the scalableComplexAction=create(3) action. This
+ object must be set prior to triggering the partition creation."
+ ::= { scalableComplexEntry 4 }
+
+ scalableComplexPartNumNodes OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The number of nodes to be included in the new partition that is being
+ created via the scalableComplexAction=create(3) action. This object must
+ be set prior to triggering the partition creation."
+ ::= { scalableComplexEntry 5 }
+
+ scalableComplexAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ clear(1),
+ autocreate(2),
+ create(3)
+ }
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "This object allows various actions to be taken in relation to a particular complex.
+
+ clear(1) - This clears all partition information related to the complex. Any nodes
+ associated with the complex are no longer assigned to any partitions.
+ All nodes in the complex must be powered off prior to attempting this
+ operation, otherwise, the action will fail.
+
+ autocreate(2) - This creates a single partition which includes all nodes associated
+ with the complex. Any other prior partition definitions must be
+ deleted prior to issuing this action, otherwise, the action will fail.
+
+ create(3) - This allows the creation of a partition within the complex. Prior to
+ triggering this action, the scalableComplexPartStartSlot and
+ scalableComplexPartNumNodes objects must be set first to identify the starting
+ slot number and number of nodes to be included in this new partition.
+ The nodes chosen for inclusion in this new partition must not be part of
+ another existing partition, otherwise, the action will fail."
+ ::= { scalableComplexEntry 6 }
+
+
+ -- *************************************************************************
+ -- Scalable Complex Partition Information
+ -- *************************************************************************
+
+ scalableComplexPartitionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ScalableComplexPartitionEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of scalable complex partition information. This table provides information
+ and control actions related to the partitions defined across all of the
+ complexes installed in the chassis. Complex, node and port information
+ and control are defined in their own tables."
+ ::= { scaling 2 }
+
+ scalableComplexPartitionEntry OBJECT-TYPE
+ SYNTAX ScalableComplexPartitionEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Scalable complex partition information."
+ INDEX { scalableComplexId, scalableComplexPartitionIdentifier }
+ ::= { scalableComplexPartitionTable 1 }
+
+ ScalableComplexPartitionEntry ::= SEQUENCE {
+ scalableComplexId INTEGER,
+ scalableComplexPartitionIdentifier INTEGER,
+ scalableComplexPartitionMode INTEGER,
+ scalableComplexPartitionNumNodes INTEGER,
+ scalableComplexPartitionStatus INTEGER,
+ scalableComplexPartitionAction INTEGER
+ }
+
+
+ scalableComplexId OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique numeric identifier for a complex installed in the chassis."
+ ::= { scalableComplexPartitionEntry 1 }
+
+ scalableComplexPartitionIdentifier OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique numeric identifier for a partition defined within a complex
+ installed in the chassis."
+ ::= { scalableComplexPartitionEntry 2 }
+
+ scalableComplexPartitionMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ partition(1),
+ standalone(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The currently configured mode of this partition. It is recommended that
+ a partition be powered off prior to modification of the mode. In addition,
+ switching a partition mode to stand-alone will cause subsequent partition
+ actions to be ignored until the partition mode is restored."
+ ::= { scalableComplexPartitionEntry 3 }
+
+ scalableComplexPartitionNumNodes OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of nodes currently defined for this partition."
+ ::= { scalableComplexPartitionEntry 4 }
+
+ scalableComplexPartitionStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ poweredoff(1),
+ poweredon(2),
+ resetting(3),
+ invalid(4)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current power status of this partition when the partition has a
+ valid partition configuration. However, in the event the partition
+ reports a partition consitency check problem, the invalid state is provided."
+ ::= { scalableComplexPartitionEntry 5 }
+
+ scalableComplexPartitionAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ delete(1),
+ poweron(2),
+ poweroff(3),
+ powercycle(4)
+ }
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "This object allows various actions to be taken in relation to a particular partition
+ in a given complex.
+
+ delete(1) - Deletes the partition from the complex. All nodes in the partition must
+ be powered off prior to attempting this operation, otherwise, the action
+ will fail.
+
+ poweron(2) - Powers up a powered off partition
+
+ poweroff(3) - Powers off an already powered on partition
+
+ powercycle(4) - Power cycles a partition"
+ ::= { scalableComplexPartitionEntry 6 }
+
+ -- *************************************************************************
+ -- Scalable Complex Node Information
+ -- *************************************************************************
+
+ scalableComplexNodeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ScalableComplexNodeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of scalable complex node information. This table provides information
+ and control actions related to the nodes installed in the chassis.
+ Complex, partition and port information and control are defined
+ in their own tables."
+ ::= { scaling 3 }
+
+ scalableComplexNodeEntry OBJECT-TYPE
+ SYNTAX ScalableComplexNodeEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Scalable complex node information."
+ INDEX { scalableComplexNodeSlot }
+ ::= { scalableComplexNodeTable 1 }
+
+ ScalableComplexNodeEntry ::= SEQUENCE {
+ scalableComplexNodeSlot INTEGER,
+ scalableComplexNodeName OCTET STRING,
+ scalableComplexNodeType INTEGER,
+ scalableComplexNodeResources OCTET STRING,
+ scalableComplexNodeRole INTEGER,
+ scalableComplexNodeState INTEGER,
+ scalableComplexNodeUUID OCTET STRING,
+ scalableComplexNodeSerialNum OCTET STRING,
+ scalableComplexNodeNumPorts INTEGER,
+ scalableComplexNodeComplexID INTEGER,
+ scalableComplexNodePartitionID INTEGER,
+ scalableComplexNodeLogicalID INTEGER,
+ scalableComplexNodeAction INTEGER
+ }
+
+ scalableComplexNodeSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The base slot number where the node exists in the chassis."
+ ::= { scalableComplexNodeEntry 1 }
+
+ scalableComplexNodeName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(256))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The description string which uniquely identifies the blade."
+ ::= { scalableComplexNodeEntry 2 }
+
+ scalableComplexNodeType OBJECT-TYPE
+ SYNTAX INTEGER {
+ processor(1),
+ memory(2),
+ io(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The general categorization of the node."
+ ::= { scalableComplexNodeEntry 3 }
+
+ scalableComplexNodeResources OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(256))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A string providing a summary overview of the resources provided by this node."
+ ::= { scalableComplexNodeEntry 4 }
+
+ scalableComplexNodeRole OBJECT-TYPE
+ SYNTAX INTEGER {
+ primary(1),
+ secondary(2),
+ unassigned(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Indicates if the node is assigned to a partition, and if so, provides an
+ indication of whether the node is the primary node of the partition or not."
+ ::= { scalableComplexNodeEntry 5 }
+
+ scalableComplexNodeState OBJECT-TYPE
+ SYNTAX INTEGER {
+ poweredoff(1),
+ poweredon(2),
+ resetting(3)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The physical power state of this node."
+ ::= { scalableComplexNodeEntry 6 }
+
+ scalableComplexNodeUUID OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(256))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Universally Unique IDentifier (UUID) of this node, represented
+ as a 16 byte hex number."
+ ::= { scalableComplexNodeEntry 7 }
+
+ scalableComplexNodeSerialNum OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(256))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The serial number of this node."
+ ::= { scalableComplexNodeEntry 8 }
+
+ scalableComplexNodeNumPorts OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of remote nodes that this node has links to."
+ ::= { scalableComplexNodeEntry 9 }
+
+ scalableComplexNodeComplexID OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "For an assigned node, the identifier of the complex this node is related to.
+ For an unassigned node, this object has no meaning."
+ ::= { scalableComplexNodeEntry 10 }
+
+ scalableComplexNodePartitionID OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "For an assigned node, the identifier of the partition this node is related to.
+ For an unassigned node, this object has no meaning."
+ ::= { scalableComplexNodeEntry 11 }
+
+ scalableComplexNodeLogicalID OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The unique numeric identifier for this node, unique within the partition."
+ ::= { scalableComplexNodeEntry 12 }
+
+ scalableComplexNodeAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ poweroff(1),
+ poweron(2)
+ }
+ ACCESS write-only
+ STATUS mandatory
+ DESCRIPTION
+ "The actions that can be applied to an unassigned node. The current state is
+ provided by the scalableComplexNodeState object."
+ ::= { scalableComplexNodeEntry 14 }
+
+
+ -- *************************************************************************
+ -- Scalable Complex Node Port Information
+ -- *************************************************************************
+
+ scalableComplexNodePortTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ScalableComplexNodePortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Table of scalable complex node port information which provides details
+ related to the port connectivity. Complex, partition and node information
+ and control are defined in their own tables."
+ ::= { scaling 4 }
+
+ scalableComplexNodePortEntry OBJECT-TYPE
+ SYNTAX ScalableComplexNodePortEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Scalable complex node port information."
+ INDEX { scalableComplexNodePortSlot, scalableComplexNodePortNum }
+ ::= { scalableComplexNodePortTable 1 }
+
+ ScalableComplexNodePortEntry ::= SEQUENCE {
+ scalableComplexNodePortSlot INTEGER,
+ scalableComplexNodePortNum INTEGER,
+ scalableComplexNodePortRemChkSum INTEGER,
+ scalableComplexNodePortRemNum INTEGER,
+ scalableComplexNodePortStatus INTEGER,
+ scalableComplexNodePortType INTEGER
+ }
+
+ scalableComplexNodePortSlot OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The base slot number where the node exists in the chassis."
+ ::= { scalableComplexNodePortEntry 1 }
+
+ scalableComplexNodePortNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The port number of a port on this node. Note that this port
+ number is 0-based, but since it is used as the table index
+ (0 is not allowed), it will be presented as one more than the
+ actual port number."
+ ::= { scalableComplexNodePortEntry 2 }
+
+ scalableComplexNodePortRemChkSum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The checksum of the remote port, used as a port identifier."
+ ::= { scalableComplexNodePortEntry 3 }
+
+ scalableComplexNodePortRemNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The zero-based port number of the remote port."
+ ::= { scalableComplexNodePortEntry 4 }
+
+ scalableComplexNodePortStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ enabled(2),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The current status of the port."
+ ::= { scalableComplexNodePortEntry 5 }
+
+ scalableComplexNodePortType OBJECT-TYPE
+ SYNTAX INTEGER {
+ qpi(1),
+ exa(2),
+ unknown(255)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The port type."
+ ::= { scalableComplexNodePortEntry 6 }
+
+
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 13:06:26 +0000