Initial commitHEADmain

1 files changed, 3023 insertions, 0 deletions

diff --git a/MIBS/junos/ATM-MIB b/MIBS/junos/ATM-MIB
new file mode 100644
index 0000000..f18bd12
--- /dev/null
+++ b/MIBS/junos/ATM-MIB
@@ -0,0 +1,3023 @@
+
+     ATM-MIB DEFINITIONS ::= BEGIN
+
+     IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE,
+        Counter32, Integer32, IpAddress, mib-2
+            FROM SNMPv2-SMI
+        DisplayString, RowStatus, TruthValue
+            FROM SNMPv2-TC
+        MODULE-COMPLIANCE, OBJECT-GROUP
+            FROM SNMPv2-CONF
+        InterfaceIndex, ifIndex
+            FROM IF-MIB
+        AtmAddr, AtmConnKind, AtmConnCastType,
+        AtmServiceCategory, AtmTrafficDescrParamIndex,
+        AtmVpIdentifier, AtmVcIdentifier,
+        AtmVorXAdminStatus, AtmVorXLastChange,
+        AtmVorXOperStatus, atmNoClpNoScr
+            FROM ATM-TC-MIB;
+
+
+     atmMIB MODULE-IDENTITY
+          LAST-UPDATED "9810191200Z"
+          ORGANIZATION "IETF AToM MIB Working Group"
+          CONTACT-INFO
+            "          Kaj Tesink
+              Postal:  Bellcore
+                       331 Newman Springs Road
+                       Red Bank, NJ 07701
+              Tel:     732-758-5254
+              Fax:     732-758-2269
+              E-mail:  kaj@bellcore.com"
+          DESCRIPTION
+           "This is the MIB Module for ATM and AAL5-related
+            objects for managing ATM interfaces, ATM virtual
+            links, ATM cross-connects, AAL5 entities, and
+            and AAL5 connections."
+          REVISION      "9810191200Z"
+          DESCRIPTION
+           "The initial revision of this module was published
+            as RFC 1695. Key revisions include:
+            o  Textual Conventions and OBJECT IDENTITIES have
+               been moved to a separate MIB module.
+            o  Applicability of objects to PVCs, SVCs and Soft
+               PVCs has been clarified.
+            o  DEFVAL clauses have been added.
+            o  The relationship of ifIndex values with different
+               layers and sublayers related to ATM has been
+               clarified.
+            o  atmTrafficQosClass has been deprecated
+               and replaced with atmServiceCategory.
+            o  atmInterfaceCurrentMaxVpiBits and
+               atmInterfaceCurrentMaxVciBits have been added with
+               a description on their relationship with other
+               objects.
+            o  atmInterfaceAddressType and atmInterfaceAdminAddress
+               have been deprecated and replaced by
+               atmInterfaceSubscrAddress.
+            o  atmInterfaceTCAlarmState has been clarified.
+            o  atmTrafficDescrParamIndexNext has been introduced
+               in order to provide a manager a free
+               atmTrafficDescrParamIndex value.
+            o  The atmTrafficFrameDiscard capability has been added.
+            o  A connection topology type (atmVpl/VclCastType) and
+               a call control type (atmVpl/VclConnKind) have been
+               added.
+            o  aal2 has been added to atmVccAalType."
+          REVISION      "9406072245Z"
+          DESCRIPTION
+           "The RFC1695 version of this MIB module."
+          ::= { mib-2 37 }
+
+
+     atmMIBObjects  OBJECT IDENTIFIER ::= {atmMIB 1}
+
+     -- {atmMIBObjects 1} has been moved to a separate
+     -- specification [19].
+
+
+     -- This ATM MIB Module consists of the following tables:
+     -- (1) ATM Interface configuration table
+     -- (2) ATM Interface DS3 PLCP table
+     -- (3) ATM Interface TC Sublayer table
+     -- (4) Atm Traffic Descriptor table
+     -- (5) ATM Interface VPL configuration table
+     -- (6) ATM Interface VCL configuration table
+     -- (7) ATM VP Cross Connect table (for PVCs)
+     -- (8) ATM VC Cross Connect table (for PVCs)
+     -- (9) ATM Interface AAL5 VCC performance statistics
+     --     table
+
+     --    ATM Interface Configuration Parameters Table
+
+     -- This table contains ATM specific
+     -- configuration information associated with
+     -- an ATM interface beyond those
+     -- supported using the ifTable.
+
+
+
+
+     atmInterfaceConfTable  OBJECT-TYPE
+          SYNTAX         SEQUENCE OF AtmInterfaceConfEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This table contains ATM local interface
+            configuration parameters, one entry per ATM
+            interface port."
+          ::= { atmMIBObjects 2 }
+
+     atmInterfaceConfEntry    OBJECT-TYPE
+          SYNTAX         AtmInterfaceConfEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This list contains ATM interface configuration
+            parameters and state variables and is indexed
+            by ifIndex values of ATM interfaces."
+          INDEX { ifIndex }
+          ::= { atmInterfaceConfTable  1}
+
+     AtmInterfaceConfEntry    ::= SEQUENCE  {
+          atmInterfaceMaxVpcs             INTEGER,
+          atmInterfaceMaxVccs             INTEGER,
+          atmInterfaceConfVpcs            INTEGER,
+          atmInterfaceConfVccs            INTEGER,
+          atmInterfaceMaxActiveVpiBits    INTEGER,
+          atmInterfaceMaxActiveVciBits    INTEGER,
+          atmInterfaceIlmiVpi             AtmVpIdentifier,
+          atmInterfaceIlmiVci             AtmVcIdentifier,
+          atmInterfaceAddressType         INTEGER,
+          atmInterfaceAdminAddress        AtmAddr,
+          atmInterfaceMyNeighborIpAddress IpAddress,
+          atmInterfaceMyNeighborIfName    DisplayString,
+          atmInterfaceCurrentMaxVpiBits   INTEGER,
+          atmInterfaceCurrentMaxVciBits   INTEGER,
+          atmInterfaceSubscrAddress       AtmAddr
+               }
+
+
+     atmInterfaceMaxVpcs OBJECT-TYPE
+          SYNTAX         INTEGER  (0..4096)
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The maximum number of VPCs (PVPCs and SVPCs)
+            supported at this ATM interface. At the ATM UNI,
+            the maximum number of VPCs (PVPCs and SVPCs)
+            ranges from 0 to 256 only."
+          ::= { atmInterfaceConfEntry 1}
+
+     atmInterfaceMaxVccs OBJECT-TYPE
+          SYNTAX         INTEGER  (0..65536)
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The maximum number of VCCs (PVCCs and SVCCs)
+            supported at this ATM interface."
+          ::= { atmInterfaceConfEntry 2}
+
+     atmInterfaceConfVpcs  OBJECT-TYPE
+          SYNTAX         INTEGER  (0..4096)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The number of VPCs (PVPC, Soft PVPC and SVPC)
+            currently in use at this ATM interface.  It includes
+            the number of PVPCs and Soft PVPCs that are configured
+            at the interface, plus the number of SVPCs
+            that are currently  established at the
+            interface.
+
+            At the ATM UNI, the configured number of
+            VPCs (PVPCs and SVPCs) can range from
+            0 to 256 only."
+          ::= { atmInterfaceConfEntry 3}
+
+     atmInterfaceConfVccs  OBJECT-TYPE
+          SYNTAX         INTEGER  (0..65536)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The number of VCCs (PVCC, Soft PVCC and SVCC)
+            currently in use at this ATM interface.  It includes
+            the number of PVCCs and Soft PVCCs that are configured
+            at the interface, plus the number of SVCCs
+            that are currently  established at the
+            interface."
+          ::= { atmInterfaceConfEntry 4}
+
+     atmInterfaceMaxActiveVpiBits  OBJECT-TYPE
+          SYNTAX         INTEGER (0..12)
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The  maximum number of active VPI bits
+            configured for use at the ATM interface.
+            At the ATM UNI, the maximum number of active
+            VPI bits configured for use ranges from
+            0 to 8 only."
+          ::= { atmInterfaceConfEntry 5}
+
+     atmInterfaceMaxActiveVciBits  OBJECT-TYPE
+          SYNTAX         INTEGER (0..16)
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The maximum number of active VCI bits
+            configured for use at this ATM interface."
+          ::= { atmInterfaceConfEntry 6}
+
+     atmInterfaceIlmiVpi OBJECT-TYPE
+          SYNTAX         AtmVpIdentifier
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The VPI value of the VCC supporting
+            the ILMI at this ATM interface.  If the values of
+            atmInterfaceIlmiVpi and atmInterfaceIlmiVci are
+            both equal to zero then the ILMI is not
+            supported at this ATM interface."
+          DEFVAL { 0 }
+          ::= { atmInterfaceConfEntry 7}
+
+     atmInterfaceIlmiVci OBJECT-TYPE
+          SYNTAX         AtmVcIdentifier
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The VCI value of the VCC supporting
+            the ILMI at this ATM interface.  If the values of
+            atmInterfaceIlmiVpi and atmInterfaceIlmiVci are
+            both equal to zero then the ILMI is not
+            supported at this ATM interface."
+          DEFVAL { 16 }
+          ::= { atmInterfaceConfEntry 8}
+
+     atmInterfaceAddressType  OBJECT-TYPE
+          SYNTAX         INTEGER {
+                            private(1),
+                            nsapE164(2),
+                            nativeE164(3),
+                            other(4)
+                              }
+          MAX-ACCESS     read-only
+          STATUS         deprecated
+          DESCRIPTION
+           "The type of primary ATM address configured
+            for use at this ATM interface."
+          ::= { atmInterfaceConfEntry 9 }
+
+     --  The atmInterfaceAdminAddress object has been replaced by
+     --  atmInterfaceSubscrAddress.
+
+     atmInterfaceAdminAddress OBJECT-TYPE
+          SYNTAX         AtmAddr
+          MAX-ACCESS     read-only
+          STATUS         deprecated
+          DESCRIPTION
+           "The primary address assigned for administrative purposes,
+            for example, an address associated with the
+            service provider side of a public network UNI
+            (thus, the value of this address corresponds
+            with the value of ifPhysAddress at the host side).
+            If this interface has no assigned administrative
+            address, or when the address used for
+            administrative purposes is the same as that used
+            for ifPhysAddress, then this is an octet string of
+            zero length."
+          ::= { atmInterfaceConfEntry 10 }
+
+     atmInterfaceMyNeighborIpAddress OBJECT-TYPE
+          SYNTAX         IpAddress
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The IP address of the neighbor system connected to
+            the  far end of this interface, to which a Network
+            Management Station can send SNMP messages, as IP
+            datagrams sent to UDP port 161, in order to access
+            network management information concerning the
+            operation of that system.  Note that the value
+            of this object may be obtained in different ways,
+            e.g., by manual configuration, or through ILMI
+            interaction with the neighbor system."
+          ::= { atmInterfaceConfEntry 11 }
+
+     atmInterfaceMyNeighborIfName OBJECT-TYPE
+          SYNTAX         DisplayString
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The textual name of the interface on the neighbor
+            system on the far end of this interface, and to
+            which this interface connects.  If the neighbor
+            system is manageable through SNMP and supports
+            the object ifName, the value of this object must
+            be identical with that of ifName for the ifEntry
+            of the lowest level physical interface
+            for this port.  If this interface does not have a
+            textual name, the value of this object is a zero
+            length string.  Note that the value of this object
+            may be obtained in different ways, e.g., by manual
+            configuration, or through ILMI interaction with
+            the neighbor system."
+          ::= { atmInterfaceConfEntry 12 }
+
+     atmInterfaceCurrentMaxVpiBits    OBJECT-TYPE
+          SYNTAX         INTEGER  (0..12)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The maximum number of VPI Bits that may
+            currently be used at this ATM interface.
+            The value is the minimum of
+            atmInterfaceMaxActiveVpiBits, and the
+            atmInterfaceMaxActiveVpiBits of the interface's
+            UNI/NNI peer.
+
+            If the interface does not negotiate with
+            its peer to determine the number of VPI Bits
+            that can be used on the interface, then the
+            value of this object must equal
+            atmInterfaceMaxActiveVpiBits."
+          ::= { atmInterfaceConfEntry 13 }
+
+     atmInterfaceCurrentMaxVciBits    OBJECT-TYPE
+          SYNTAX         INTEGER  (0..16)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The maximum number of VCI Bits that may
+            currently be used at this ATM interface.
+            The value is the minimum of
+            atmInterfaceMaxActiveVciBits, and the
+            atmInterfaceMaxActiveVciBits of the interface's
+            UNI/NNI peer.
+
+            If the interface does not negotiate with
+            its peer to determine the number of VCI Bits
+            that can be used on the interface, then the
+            value of this object must equal
+            atmInterfaceMaxActiveVciBits."
+          ::= { atmInterfaceConfEntry 14 }
+
+     atmInterfaceSubscrAddress OBJECT-TYPE
+          SYNTAX         AtmAddr
+          MAX-ACCESS     read-write
+          STATUS         current
+          DESCRIPTION
+           "The identifier assigned by a service provider
+            to the network side of a public network UNI.
+            If this interface has no assigned service provider
+            address, or for other interfaces this is an octet string
+            of zero length."
+          ::= { atmInterfaceConfEntry 15 }
+
+     -- The ATM Interface DS3 PLCP Table
+
+     -- This table contains the DS3 PLCP configuration and
+     -- state parameters of those ATM interfaces
+     -- which use DS3 PLCP for carrying ATM cells over DS3.
+
+     atmInterfaceDs3PlcpTable  OBJECT-TYPE
+          SYNTAX       SEQUENCE OF AtmInterfaceDs3PlcpEntry
+          MAX-ACCESS   not-accessible
+          STATUS       current
+          DESCRIPTION
+           "This table contains ATM interface DS3 PLCP
+            parameters and state variables, one entry per
+            ATM interface port."
+          ::= { atmMIBObjects 3}
+
+     atmInterfaceDs3PlcpEntry OBJECT-TYPE
+          SYNTAX         AtmInterfaceDs3PlcpEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This list contains DS3 PLCP parameters and
+            state variables at the ATM interface and is
+            indexed by the ifIndex value of the ATM interface."
+          INDEX    { ifIndex }
+          ::= { atmInterfaceDs3PlcpTable 1}
+
+     AtmInterfaceDs3PlcpEntry    ::= SEQUENCE  {
+          atmInterfaceDs3PlcpSEFSs       Counter32,
+          atmInterfaceDs3PlcpAlarmState  INTEGER,
+          atmInterfaceDs3PlcpUASs        Counter32
+            }
+
+
+     atmInterfaceDs3PlcpSEFSs  OBJECT-TYPE
+          SYNTAX         Counter32
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The number of DS3 PLCP Severely Errored Framing
+            Seconds (SEFS). Each SEFS represents a
+            one-second interval which contains
+            one or more SEF events."
+          ::= { atmInterfaceDs3PlcpEntry 1}
+
+     atmInterfaceDs3PlcpAlarmState    OBJECT-TYPE
+          SYNTAX         INTEGER {
+                            noAlarm(1),
+                            receivedFarEndAlarm(2),
+                            incomingLOF(3)
+                                 }
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "This variable indicates if there is an
+            alarm present for the DS3 PLCP.  The value
+            receivedFarEndAlarm means that the DS3 PLCP
+            has received an incoming Yellow
+            Signal, the value incomingLOF means that
+            the DS3 PLCP has declared a loss of frame (LOF)
+            failure condition, and the value noAlarm
+            means that there are no alarms present.
+            Transition from the failure to the no alarm state
+            occurs when no defects (e.g., LOF) are received
+            for more than 10 seconds."
+          ::= { atmInterfaceDs3PlcpEntry 2}
+
+     atmInterfaceDs3PlcpUASs  OBJECT-TYPE
+          SYNTAX         Counter32
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The counter associated with the number of
+            Unavailable Seconds encountered by the PLCP."
+          ::= { atmInterfaceDs3PlcpEntry 3}
+
+
+     -- The ATM Interface TC Sublayer Table
+
+     -- This table contains TC sublayer configuration and
+     -- state parameters of those ATM interfaces
+     -- which use TC sublayer for carrying ATM cells over
+     -- SONET/SDH or DS3.
+
+
+     atmInterfaceTCTable  OBJECT-TYPE
+          SYNTAX         SEQUENCE OF AtmInterfaceTCEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This table contains ATM interface TC
+            Sublayer parameters and state variables,
+            one entry per ATM interface port."
+          ::= { atmMIBObjects 4}
+
+     atmInterfaceTCEntry OBJECT-TYPE
+          SYNTAX         AtmInterfaceTCEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This list contains TC Sublayer parameters
+            and state variables at the ATM interface and is
+            indexed by the ifIndex value of the ATM interface."
+          INDEX  {ifIndex }
+          ::= { atmInterfaceTCTable 1}
+
+     AtmInterfaceTCEntry    ::= SEQUENCE  {
+          atmInterfaceOCDEvents      Counter32,
+          atmInterfaceTCAlarmState   INTEGER
+            }
+
+     atmInterfaceOCDEvents  OBJECT-TYPE
+          SYNTAX         Counter32
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The number of times the Out of Cell
+            Delineation (OCD) events occur.  If seven
+            consecutive ATM cells have Header Error
+            Control (HEC) violations, an OCD event occurs.
+            A high number of OCD events may indicate a
+            problem with the TC Sublayer."
+          ::= { atmInterfaceTCEntry 1}
+
+
+     atmInterfaceTCAlarmState    OBJECT-TYPE
+          SYNTAX         INTEGER {
+                            noAlarm(1),
+                            lcdFailure(2)
+                                  }
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "This variable indicates if there is an
+            alarm present for the TC Sublayer.  The value
+            lcdFailure(2) indicates that the TC Sublayer
+            is currently in the Loss of Cell Delineation
+            (LCD) defect maintenance state.  The value
+            noAlarm(1) indicates that the TC Sublayer
+            is currently not in the LCD defect
+            maintenance state."
+           ::= { atmInterfaceTCEntry 2}
+
+     --  ATM Traffic Descriptor Parameter Table
+
+     -- This table contains a set of self-consistent
+     -- ATM traffic parameters including the
+     -- ATM traffic service category.
+
+     -- The ATM virtual link tables (i.e., VPL and VCL tables)
+     -- will use this ATM Traffic Descriptor table
+     -- to assign traffic parameters and service category
+     -- to the receive and transmit directions of
+     -- the ATM virtual links (i.e., VPLs and VCLs).
+     -- The ATM VPL or VCL table will indicate a row
+     -- in the atmTrafficDescrParamTable
+     -- using its atmTrafficDescrParamIndex value.
+
+     -- The management application can then compare a set of
+     -- ATM traffic parameters with a single value.
+
+     -- If no suitable row(s) in the atmTrafficDescrParamTable
+     -- exists, the manager must create a new row(s) in this
+     -- table. If such a row is created, agent checks the
+     -- sanity of that set of ATM traffic parameter values.
+
+     -- The manager may use atmTrafficDescrParamIndexNext
+     -- in order to obtain a free atmTrafficDescrParamIndex
+     -- value.
+
+     -- When creating a new row, the parameter values
+     -- will be checked for self-consistency.
+     -- Predefined/template rows may be supported.
+
+     -- A row in the atmTrafficDescrParamTable is deleted
+     -- by setting the atmTrafficDescrRowStatus to destroy(6).
+     -- The agent will check whether this row is still in use
+     -- by any entry of the atmVplTable or atmVclTable.
+     -- The agent denies the request if the row is still in
+     -- use.
+
+     --  The ATM Traffic Descriptor Parameter Table
+
+
+     atmTrafficDescrParamTable    OBJECT-TYPE
+          SYNTAX       SEQUENCE OF AtmTrafficDescrParamEntry
+          MAX-ACCESS   not-accessible
+          STATUS       current
+          DESCRIPTION
+           "This table contains information on ATM traffic
+            descriptor type and the associated parameters."
+          ::= { atmMIBObjects 5}
+
+     atmTrafficDescrParamEntry    OBJECT-TYPE
+          SYNTAX         AtmTrafficDescrParamEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This list contains ATM traffic descriptor
+            type and the associated parameters."
+          INDEX  {atmTrafficDescrParamIndex}
+          ::= { atmTrafficDescrParamTable 1}
+
+     AtmTrafficDescrParamEntry   ::= SEQUENCE  {
+       atmTrafficDescrParamIndex  AtmTrafficDescrParamIndex,
+       atmTrafficDescrType        OBJECT IDENTIFIER,
+       atmTrafficDescrParam1      Integer32,
+       atmTrafficDescrParam2      Integer32,
+       atmTrafficDescrParam3      Integer32,
+       atmTrafficDescrParam4      Integer32,
+       atmTrafficDescrParam5      Integer32,
+       atmTrafficQoSClass         INTEGER,
+       atmTrafficDescrRowStatus   RowStatus,
+       atmServiceCategory         AtmServiceCategory,
+       atmTrafficFrameDiscard     TruthValue
+                    }
+
+     atmTrafficDescrParamIndex OBJECT-TYPE
+          SYNTAX  AtmTrafficDescrParamIndex (1..2147483647)
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This object is used by the virtual link
+            table (i.e., VPL or VCL table)
+            to identify the row of this table.
+            When creating a new row in the table
+            the value of this index may be obtained
+            by retrieving the value of
+            atmTrafficDescrParamIndexNext."
+          ::= { atmTrafficDescrParamEntry  1}
+
+     atmTrafficDescrType OBJECT-TYPE
+          SYNTAX         OBJECT IDENTIFIER
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The value of this object identifies the type
+            of ATM traffic descriptor.
+            The type may indicate no traffic descriptor or
+            traffic descriptor with one or more parameters.
+            These parameters are specified as a parameter
+            vector, in the corresponding instances of the
+            objects:
+                atmTrafficDescrParam1
+                atmTrafficDescrParam2
+                atmTrafficDescrParam3
+                atmTrafficDescrParam4
+                atmTrafficDescrParam5."
+           DEFVAL  { atmNoClpNoScr }
+           ::= { atmTrafficDescrParamEntry 2}
+
+     atmTrafficDescrParam1 OBJECT-TYPE
+          SYNTAX         Integer32
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The first parameter of the ATM traffic descriptor
+            used according to the value of
+            atmTrafficDescrType."
+          DEFVAL  { 0 }
+          ::= { atmTrafficDescrParamEntry 3}
+
+     atmTrafficDescrParam2 OBJECT-TYPE
+          SYNTAX         Integer32
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The second parameter of the ATM traffic descriptor
+            used according to the value of
+            atmTrafficDescrType."
+          DEFVAL  { 0 }
+          ::= { atmTrafficDescrParamEntry 4}
+
+     atmTrafficDescrParam3 OBJECT-TYPE
+          SYNTAX         Integer32
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The third parameter of the ATM traffic descriptor
+            used according to the value of
+            atmTrafficDescrType."
+          DEFVAL  { 0 }
+          ::= { atmTrafficDescrParamEntry 5}
+
+     atmTrafficDescrParam4 OBJECT-TYPE
+          SYNTAX         Integer32
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The fourth parameter of the ATM traffic descriptor
+            used according to the value of
+            atmTrafficDescrType."
+          DEFVAL  { 0 }
+          ::= { atmTrafficDescrParamEntry 6}
+
+     atmTrafficDescrParam5 OBJECT-TYPE
+          SYNTAX         Integer32
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The fifth parameter of the ATM traffic descriptor
+            used according to the value of
+            atmTrafficDescrType."
+          DEFVAL  { 0 }
+          ::= { atmTrafficDescrParamEntry 7}
+
+     atmTrafficQoSClass  OBJECT-TYPE
+          SYNTAX         INTEGER (0..255)
+          MAX-ACCESS     read-create
+          STATUS         deprecated
+          DESCRIPTION
+           "The value of this object identifies the QoS Class.
+            Four Service classes have been
+            specified in the ATM Forum UNI Specification:
+            Service Class A: Constant bit rate video and
+                             Circuit emulation
+            Service Class B: Variable bit rate video/audio
+            Service Class C: Connection-oriented data
+            Service Class D: Connectionless data
+            Four QoS classes numbered 1, 2, 3, and 4 have
+            been specified with the aim to support service
+            classes A, B, C, and D respectively.
+            An unspecified QoS Class numbered `0' is used
+            for best effort traffic."
+          DEFVAL  { 0 }
+          ::= { atmTrafficDescrParamEntry 8}
+
+     atmTrafficDescrRowStatus  OBJECT-TYPE
+          SYNTAX         RowStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "This object is used to create
+            a new row or modify or delete an
+            existing row in this table."
+          DEFVAL  { active }
+          ::= {atmTrafficDescrParamEntry 9}
+
+     atmServiceCategory  OBJECT-TYPE
+          SYNTAX         AtmServiceCategory
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The ATM service category."
+          DEFVAL  { ubr }
+          ::= { atmTrafficDescrParamEntry 10}
+
+
+     atmTrafficFrameDiscard    OBJECT-TYPE
+          SYNTAX       TruthValue
+          MAX-ACCESS   read-create
+          STATUS       current
+          DESCRIPTION
+           "If set to 'true', this object indicates that the network
+            is requested to treat data for this connection, in the
+            given direction, as frames (e.g. AAL5 CPCS_PDU's) rather
+            than as individual cells.  While the precise
+            implementation is network-specific, this treatment may
+            for example involve discarding entire frames during
+            congestion, rather than a few cells from many frames."
+          DEFVAL { true }
+          ::= { atmTrafficDescrParamEntry 11 }
+
+     --  ATM Interface Virtual Path Link (VPL) Table
+
+     -- This table contains configuration and state
+     -- information of a bi-directional Virtual Path Link
+     -- (VPL)
+
+     -- This table can be used to create, delete or modify
+     -- a VPL that is terminated in an ATM host or switch.
+     -- This table can also be used to create, delete or
+     -- modify a VPL which is cross-connected to another
+     -- VPL.
+
+     -- In the example below, the traffic flows on the receive
+     -- and transmit directions of the VPLs are characterized
+     -- by atmVplReceiveTrafficDescrIndex and
+     -- atmVplTransmitTrafficDescrIndex respectively.
+     -- The cross-connected VPLs are identified by
+     -- atmVplCrossConnectIdentifier.
+
+
+
+     --           ________________________________
+     --           |                              |
+     --  VPL      | ATM Host, Switch, or Network |   VPL
+     -- receive   |                              |  receive
+     -- ========> X                              X <=======
+     -- <======== X                              X ========>
+     -- transmit  |                              |  transmit
+     --           |______________________________|
+
+
+
+     --  The ATM Interface VPL Table
+
+     atmVplTable         OBJECT-TYPE
+          SYNTAX         SEQUENCE OF AtmVplEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The Virtual Path Link (VPL) table.  A
+            bi-directional VPL is modeled as one entry
+            in this table. This table can be used for
+            PVCs, SVCs and Soft PVCs.
+            Entries are not present in this table for
+            the VPIs used by entries in the atmVclTable."
+          ::= { atmMIBObjects 6}
+
+     atmVplEntry         OBJECT-TYPE
+          SYNTAX         AtmVplEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "An entry in the VPL table.  This entry is
+            used to model a bi-directional VPL.
+            To create a VPL at an ATM interface,
+            either of the following procedures are used:
+
+            Negotiated VPL establishment
+
+          (1) The management application creates
+              a VPL entry in the atmVplTable
+              by setting atmVplRowStatus to createAndWait(5).
+              This may fail for the following reasons:
+              - The selected VPI value is unavailable,
+              - The selected VPI value is in use.
+              Otherwise, the agent creates a row and
+              reserves the VPI value on that port.
+
+          (2) The manager selects an existing row(s) in the
+              atmTrafficDescrParamTable,
+              thereby, selecting a set of self-consistent
+              ATM traffic parameters and the service category
+              for receive and transmit directions of the VPL.
+
+         (2a) If no suitable row(s) in the
+              atmTrafficDescrParamTable exists,
+              the manager must create a new row(s)
+              in that table.
+
+         (2b) The manager characterizes the VPL's traffic
+              parameters through setting the
+              atmVplReceiveTrafficDescrIndex and the
+              atmVplTransmitTrafficDescrIndex values
+              in the VPL table, which point to the rows
+              containing desired ATM traffic parameter values
+              in the atmTrafficDescrParamTable.  The agent
+              will check the availability of resources and
+              may refuse the request.
+              If the transmit and receive service categories
+              are inconsistent, the agent should refuse the
+              request.
+
+          (3) The manager activates the VPL by setting the
+              the atmVplRowStatus to active(1).
+              If this set is successful, the agent has
+              reserved the resources to satisfy the requested
+              traffic parameter values and the service category
+              for that VPL.
+
+          (4) If the VPL terminates a VPC in the ATM host
+              or switch, the manager turns on the
+              atmVplAdminStatus to up(1) to turn the VPL
+              traffic flow on.  Otherwise, the
+              atmVpCrossConnectTable  must be used
+              to cross-connect the VPL to another VPL(s)
+              in an ATM switch or network.
+
+            One-Shot VPL Establishment
+
+            A VPL may also be established in one step by a
+            set-request with all necessary VPL parameter
+            values and atmVplRowStatus set to createAndGo(4).
+
+            In contrast to the negotiated VPL establishment
+            which allows for detailed error checking
+            (i.e., set errors are explicitly linked to
+            particular resource acquisition failures),
+            the one-shot VPL establishment
+            performs the setup on one operation but
+            does not have the advantage of step-wise
+            error checking.
+
+            VPL Retirement
+
+            A VPL is released by setting atmVplRowStatus to
+            destroy(6), and the agent may release all
+            associated resources."
+          INDEX  {ifIndex, atmVplVpi }
+          ::= { atmVplTable  1}
+
+     AtmVplEntry    ::= SEQUENCE  {
+          atmVplVpi          AtmVpIdentifier,
+          atmVplAdminStatus  AtmVorXAdminStatus,
+          atmVplOperStatus   AtmVorXOperStatus,
+          atmVplLastChange   AtmVorXLastChange,
+          atmVplReceiveTrafficDescrIndex
+                         AtmTrafficDescrParamIndex,
+          atmVplTransmitTrafficDescrIndex
+                         AtmTrafficDescrParamIndex,
+          atmVplCrossConnectIdentifier INTEGER,
+          atmVplRowStatus    RowStatus,
+          atmVplCastType     AtmConnCastType,
+          atmVplConnKind     AtmConnKind
+             }
+
+
+     atmVplVpi           OBJECT-TYPE
+          SYNTAX         AtmVpIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VPI value of the VPL."
+          ::= { atmVplEntry 1}
+
+     atmVplAdminStatus   OBJECT-TYPE
+          SYNTAX         AtmVorXAdminStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "This object is instanciated only for a VPL
+            which terminates a VPC (i.e., one which is
+            NOT cross-connected to other VPLs).
+            Its value specifies the desired
+            administrative state of the VPL."
+          DEFVAL { down }
+          ::= { atmVplEntry 2}
+
+     atmVplOperStatus    OBJECT-TYPE
+          SYNTAX         AtmVorXOperStatus
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The current operational status of the VPL."
+          ::= { atmVplEntry 3}
+
+     atmVplLastChange    OBJECT-TYPE
+          SYNTAX         AtmVorXLastChange
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The value of sysUpTime at the time this
+            VPL entered its current operational state."
+          ::= { atmVplEntry 4 }
+
+     atmVplReceiveTrafficDescrIndex  OBJECT-TYPE
+          SYNTAX         AtmTrafficDescrParamIndex
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The value of this object identifies the row
+            in the atmTrafficDescrParamTable which
+            applies to the receive direction of the VPL."
+          DEFVAL { 0 }
+           ::= { atmVplEntry 5}
+
+     atmVplTransmitTrafficDescrIndex  OBJECT-TYPE
+          SYNTAX         AtmTrafficDescrParamIndex
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The value of this object identifies the row
+            in the atmTrafficDescrParamTable which
+            applies to the transmit direction of the VPL."
+          DEFVAL { 0 }
+           ::= { atmVplEntry 6}
+
+     atmVplCrossConnectIdentifier   OBJECT-TYPE
+          SYNTAX         INTEGER (0..2147483647)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "This object is instantiated only for a VPL
+            which is cross-connected to other VPLs
+            that belong to the same VPC.  All such
+            associated VPLs have the same value of this
+            object, and all their cross-connections are
+            identified either by entries that are indexed
+            by the same value of atmVpCrossConnectIndex in
+            the atmVpCrossConnectTable of this MIB module or by
+            the same value of the cross-connect index in
+            the cross-connect table for SVCs and Soft PVCs
+            (defined in a separate MIB module).
+            At no time should entries in these respective
+            cross-connect tables exist simultaneously
+            with the same cross-connect index value.
+            The value of this object is initialized by the
+            agent after the associated entries in the
+            atmVpCrossConnectTable have been created."
+          ::= {atmVplEntry 7}
+
+     atmVplRowStatus     OBJECT-TYPE
+          SYNTAX         RowStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "This object is used to create, delete
+            or modify a row in this table.
+            To create a new VCL, this object is
+            initially set to 'createAndWait' or
+            'createAndGo'.  This object should not be
+            set to 'active' unless the following columnar
+            objects have been set to their desired value
+            in this row:
+            atmVplReceiveTrafficDescrIndex and
+            atmVplTransmitTrafficDescrIndex.
+            The DESCRIPTION of atmVplEntry provides
+            further guidance to row treatment in this table."
+          DEFVAL { createAndWait }
+          ::= {atmVplEntry 8}
+
+     atmVplCastType      OBJECT-TYPE
+          SYNTAX         AtmConnCastType
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The connection topology type."
+          DEFVAL { p2p }
+          ::= {atmVplEntry 9}
+
+     atmVplConnKind      OBJECT-TYPE
+          SYNTAX         AtmConnKind
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The use of call control."
+          DEFVAL { pvc }
+          ::= {atmVplEntry 10}
+
+     --  ATM Interface Virtual Channel Link (VCL) Table
+
+     -- This table contains configuration and state
+     -- information of a bi-directional Virtual Channel
+     -- Link (VCL) at an ATM interface.
+
+     -- This table can be used to create, delete or modify
+     -- a VCL that is terminated in an ATM host or switch.
+     -- This table can also be
+     -- used to create, delete or modify a VCL that is
+     -- cross-connected to another VCL.
+
+
+     --  The ATM Interface VCL Table
+
+
+     atmVclTable         OBJECT-TYPE
+          SYNTAX         SEQUENCE OF AtmVclEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The Virtual Channel Link (VCL) table.  A
+            bi-directional VCL is modeled as one entry
+            in this table. This table can be used for
+            PVCs, SVCs and Soft PVCs."
+          ::= { atmMIBObjects 7}
+
+     atmVclEntry         OBJECT-TYPE
+          SYNTAX         AtmVclEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "An entry in the VCL table. This entry is
+            used to model a bi-directional VCL.
+            To create a VCL at an ATM interface,
+            either of the following procedures are used:
+
+            Negotiated VCL establishment
+
+          (1) The management application creates
+              a VCL entry in the atmVclTable
+              by setting atmVclRowStatus to createAndWait(5).
+              This may fail for the following reasons:
+              - The selected VPI/VCI values are unavailable,
+              - The selected VPI/VCI values are in use.
+              Otherwise, the agent creates a row and
+              reserves the VPI/VCI values on that port.
+
+          (2) The manager selects an existing row(s) in the
+              atmTrafficDescrParamTable,
+              thereby, selecting a set of self-consistent
+              ATM traffic parameters and the service category
+              for receive and transmit directions of the VCL.
+
+         (2a) If no suitable row(s) in the
+              atmTrafficDescrParamTable exists,
+              the manager must create a new row(s)
+              in that table.
+
+         (2b) The manager characterizes the VCL's traffic
+              parameters through setting the
+              atmVclReceiveTrafficDescrIndex and the
+              atmVclTransmitTrafficDescrIndex values
+              in the VCL table, which point to the rows
+              containing desired ATM traffic parameter values
+              in the atmTrafficDescrParamTable.  The agent
+              will check the availability of resources and
+              may refuse the request.
+              If the transmit and receive service categories
+              are inconsistent, the agent should refuse the
+              request.
+
+          (3) The manager activates the VCL by setting the
+              the atmVclRowStatus to active(1) (for
+              requirements on this activation see the
+              description of atmVclRowStatus).
+              If this set is successful, the agent has
+              reserved the resources to satisfy the requested
+              traffic parameter values and the service category
+              for that VCL.
+          (4) If the VCL terminates a VCC in the ATM host
+              or switch, the manager turns on the
+              atmVclAdminStatus to up(1) to turn the VCL
+              traffic flow on.  Otherwise, the
+              atmVcCrossConnectTable  must be used
+              to cross-connect the VCL to another VCL(s)
+              in an ATM switch or network.
+
+           One-Shot VCL Establishment
+
+           A VCL may also be established in one step by a
+           set-request with all necessary VCL parameter
+           values and atmVclRowStatus set to createAndGo(4).
+
+           In contrast to the negotiated VCL establishment
+           which allows for detailed error checking
+           (i.e., set errors are explicitly linked to
+           particular resource acquisition failures),
+           the one-shot VCL establishment
+           performs the setup on one operation but
+           does not have the advantage of step-wise
+           error checking.
+
+           VCL Retirement
+
+           A VCL is released by setting atmVclRowStatus to
+           destroy(6), and the agent may release all
+           associated resources."
+          INDEX  {ifIndex, atmVclVpi, atmVclVci }
+          ::= { atmVclTable  1}
+
+     AtmVclEntry    ::= SEQUENCE  {
+          atmVclVpi                     AtmVpIdentifier,
+          atmVclVci                     AtmVcIdentifier,
+          atmVclAdminStatus             AtmVorXAdminStatus,
+          atmVclOperStatus              AtmVorXOperStatus,
+          atmVclLastChange              AtmVorXLastChange,
+          atmVclReceiveTrafficDescrIndex
+                                AtmTrafficDescrParamIndex,
+          atmVclTransmitTrafficDescrIndex
+                                AtmTrafficDescrParamIndex,
+          atmVccAalType                 INTEGER,
+          atmVccAal5CpcsTransmitSduSize INTEGER,
+          atmVccAal5CpcsReceiveSduSize  INTEGER,
+          atmVccAal5EncapsType          INTEGER,
+          atmVclCrossConnectIdentifier  INTEGER,
+          atmVclRowStatus               RowStatus,
+          atmVclCastType                AtmConnCastType,
+          atmVclConnKind                AtmConnKind
+                 }
+
+     atmVclVpi           OBJECT-TYPE
+          SYNTAX         AtmVpIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VPI value of the VCL."
+          ::= { atmVclEntry 1}
+
+     atmVclVci           OBJECT-TYPE
+          SYNTAX         AtmVcIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VCI value of the VCL."
+          ::= { atmVclEntry 2}
+
+     atmVclAdminStatus   OBJECT-TYPE
+          SYNTAX         AtmVorXAdminStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "This object is instanciated only for a VCL which
+            terminates a VCC (i.e., one which is NOT
+            cross-connected to other VCLs). Its value
+            specifies the desired administrative state of
+            the VCL."
+          DEFVAL { down }
+          ::= { atmVclEntry 3}
+
+     atmVclOperStatus    OBJECT-TYPE
+          SYNTAX         AtmVorXOperStatus
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The current operational status of the VCL."
+          ::= { atmVclEntry 4}
+
+     atmVclLastChange    OBJECT-TYPE
+          SYNTAX         AtmVorXLastChange
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The value of sysUpTime at the time this VCL
+            entered its current operational state."
+          ::= { atmVclEntry 5 }
+
+     atmVclReceiveTrafficDescrIndex  OBJECT-TYPE
+          SYNTAX         AtmTrafficDescrParamIndex
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The value of this object identifies the row
+            in the ATM Traffic Descriptor Table which
+            applies to the receive direction of this VCL."
+          DEFVAL { 0 }
+           ::= { atmVclEntry 6}
+
+     atmVclTransmitTrafficDescrIndex  OBJECT-TYPE
+          SYNTAX         AtmTrafficDescrParamIndex
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The value of this object identifies the row
+            of the ATM Traffic Descriptor Table which applies
+            to the transmit direction of this VCL."
+          DEFVAL { 0 }
+           ::= { atmVclEntry 7}
+
+     atmVccAalType       OBJECT-TYPE
+          SYNTAX         INTEGER {
+                            aal1(1),
+                            aal34(2),
+                            aal5(3),
+                            other(4),
+                            unknown(5),
+                            aal2(6)
+                              }
+          MAX-ACCESS    read-create
+          STATUS        current
+          DESCRIPTION
+           "An instance of this object only exists when the
+            local VCL end-point is also the VCC end-point,
+            and AAL is in use.
+            The type of AAL used on this VCC.
+            The AAL type includes AAL1, AAL2, AAL3/4,
+            and AAL5. The other(4) may be user-defined
+            AAL type.  The unknown type indicates that
+            the AAL type cannot be determined."
+          DEFVAL { aal5 }
+          ::= { atmVclEntry 8 }
+
+     atmVccAal5CpcsTransmitSduSize OBJECT-TYPE
+          SYNTAX         INTEGER (1..65535)
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "An instance of this object only exists when the
+            local VCL end-point is also the VCC end-point,
+            and AAL5 is in use.
+            The maximum AAL5 CPCS SDU size in octets that is
+            supported on the transmit direction of this VCC."
+          DEFVAL { 9188 }
+                ::= { atmVclEntry 9 }
+
+     atmVccAal5CpcsReceiveSduSize OBJECT-TYPE
+          SYNTAX         INTEGER (1..65535)
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "An instance of this object only exists when the
+            local VCL end-point is also the VCC end-point,
+            and AAL5 is in use.
+            The maximum AAL5 CPCS SDU size in octets that is
+            supported on the receive direction of this VCC."
+          DEFVAL { 9188 }
+                ::= { atmVclEntry 10 }
+
+     atmVccAal5EncapsType  OBJECT-TYPE
+          SYNTAX         INTEGER {
+                         vcMultiplexRoutedProtocol(1),
+                         vcMultiplexBridgedProtocol8023(2),
+                         vcMultiplexBridgedProtocol8025(3),
+                         vcMultiplexBridgedProtocol8026(4),
+                         vcMultiplexLANemulation8023(5),
+                         vcMultiplexLANemulation8025(6),
+                         llcEncapsulation(7),
+                         multiprotocolFrameRelaySscs(8),
+                         other(9),
+                         unknown(10)
+                            }
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "An instance of this object only exists when the
+            local VCL end-point is also the VCC end-point,
+            and AAL5 is in use.
+            The type of data encapsulation used over
+            the AAL5 SSCS layer. The definitions reference
+            RFC 1483 Multiprotocol Encapsulation
+            over ATM AAL5 and to the ATM Forum
+            LAN Emulation specification."
+          DEFVAL { llcEncapsulation }
+                ::= { atmVclEntry 11 }
+
+     atmVclCrossConnectIdentifier   OBJECT-TYPE
+          SYNTAX         INTEGER (0..2147483647)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "This object is instantiated only for a VCL
+            which is cross-connected to other VCLs
+            that belong to the same VCC.  All such
+            associated VCLs have the same value of this
+            object, and all their cross-connections are
+            identified either by entries that are indexed
+            by the same value of atmVcCrossConnectIndex in
+            the atmVcCrossConnectTable of this MIB module or by
+            the same value of the cross-connect index in
+            the cross-connect table for SVCs and Soft PVCs
+            (defined in a separate MIB module).
+
+            At no time should entries in these respective
+            cross-connect tables exist simultaneously
+            with the same cross-connect index value.
+
+            The value of this object is initialized by the
+            agent after the associated entries in the
+            atmVcCrossConnectTable have been created."
+          ::= {atmVclEntry 12}
+
+     atmVclRowStatus     OBJECT-TYPE
+          SYNTAX         RowStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "This object is used to create, delete or
+            modify a row in this table.  To create
+            a new VCL, this object is initially set
+            to 'createAndWait' or 'createAndGo'.
+            This object should not be
+            set to 'active' unless the following columnar
+            objects have been set to their desired value
+            in this row:
+            atmVclReceiveTrafficDescrIndex,
+            atmVclTransmitTrafficDescrIndex.
+            In addition, if the local VCL end-point
+            is also the VCC end-point:
+            atmVccAalType.
+            In addition, for AAL5 connections only:
+            atmVccAal5CpcsTransmitSduSize,
+            atmVccAal5CpcsReceiveSduSize, and
+            atmVccAal5EncapsType. (The existence
+            of these objects imply the AAL connection type.).
+            The DESCRIPTION of atmVclEntry provides
+            further guidance to row treatment in this table."
+          DEFVAL { createAndWait }
+                ::= {atmVclEntry 13}
+
+     atmVclCastType      OBJECT-TYPE
+          SYNTAX         AtmConnCastType
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The connection topology type."
+          DEFVAL { p2p }
+                ::= {atmVclEntry 14}
+
+
+     atmVclConnKind      OBJECT-TYPE
+          SYNTAX         AtmConnKind
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The use of call control."
+          DEFVAL { pvc }
+          ::= {atmVclEntry 15}
+
+
+     --     ATM Virtual Path (VP) Cross Connect Table
+
+     -- This table contains configuration and state
+     -- information of point-to-point,
+     -- point-to-multipoint, or multipoint-to-multipoint
+     -- VP cross-connects for PVCs.
+
+     -- This table has read-create access and can be used
+     -- to cross-connect the VPLs together in an ATM switch
+     -- or network. The atmVpCrossConnectIndex
+     -- is used to associate the related
+     -- VPLs that are cross-connected together.
+
+     -- The ATM VP Cross Connect Table
+     -- models each bi-directional VPC
+     -- cross-connect as a set of entries in
+     -- the atmVpCrossConnectTable. A
+     -- point-to-point VPC cross-connect is modeled
+     -- as one entry; a point-to-multipoint (N leafs) VPC
+     -- cross-connect as N entries in this table; and
+     -- a multipoint-to-multipoint (N parties) VPC cross-
+     -- connect as N(N-1)/2 entries in this table.
+     -- In the latter cases, all the N (or N(N-1)/2) entries
+     -- are associated with a single VPC cross-connect by
+     -- having the same value of atmVpCrossConnectIndex.
+
+
+     --      _________________________________________
+     --      |                                       |
+     --  Low |         ATM Switch or Network         | High
+     --  port|                                       | port
+     -- _____|>> from low to high VPC traffic flow >>|______
+     --      |<< from high to low VPC traffic flow <<|
+     --      |                                       |
+     --      |_______________________________________|
+     --
+
+     -- The terms low and high are chosen to represent
+     -- numerical ordering of the two interfaces associated
+     -- with a VPC cross-connect. That is, the ATM interface
+     -- with the lower value of ifIndex is termed 'low',
+     -- while the other ATM interface associated with the
+     -- VPC cross-connect is termed 'high'. This terminology
+     -- is used to provide directional information; for
+     -- example, the atmVpCrossConnectL2HOperStatus applies
+     -- to the low->high direction, and
+     -- atmVpCrossConnectH2LOperStatus applies to the
+     -- high->low  direction, as illustrated above.
+
+
+
+
+     atmVpCrossConnectIndexNext  OBJECT-TYPE
+          SYNTAX         INTEGER (0..2147483647)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "This object contains an appropriate value to
+            be used for atmVpCrossConnectIndex when creating
+            entries in the atmVpCrossConnectTable.  The value
+            0 indicates that no unassigned entries are
+            available. To obtain the atmVpCrossConnectIndex
+            value for a new entry, the manager issues a
+            management protocol retrieval operation to obtain
+            the current value of this object.  After each
+            retrieval, the agent should modify the value to
+            the next unassigned index.
+            After a manager retrieves a value the agent will
+            determine through its local policy when this index
+            value will be made available for reuse."
+          ::= { atmMIBObjects 8 }
+
+
+     --  The ATM VP Cross Connect Table
+
+
+     atmVpCrossConnectTable OBJECT-TYPE
+          SYNTAX         SEQUENCE OF AtmVpCrossConnectEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The ATM VP Cross Connect table for PVCs.
+            An entry in this table models two
+            cross-connected VPLs.
+            Each VPL must have its atmConnKind set
+            to pvc(1)."
+          ::= { atmMIBObjects 9 }
+
+
+     atmVpCrossConnectEntry OBJECT-TYPE
+          SYNTAX         AtmVpCrossConnectEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "An entry in the ATM VP Cross Connect table.
+            This entry is used to model a bi-directional
+            ATM VP cross-connect which cross-connects
+            two VPLs.
+
+            Step-wise Procedures to set up a VP Cross-connect
+
+            Once the entries in the atmVplTable are created,
+            the following procedures are used
+            to cross-connect the VPLs together.
+
+           (1) The manager obtains a unique
+               atmVpCrossConnectIndex by reading the
+               atmVpCrossConnectIndexNext object.
+
+           (2) Next, the manager creates a set of one
+               or more rows in the ATM VP Cross Connect
+               Table, one for each cross-connection between
+               two VPLs.  Each row is indexed by the ATM
+               interface port numbers and VPI values of the
+               two ends of that cross-connection.
+               This set of rows specifies the topology of the
+               VPC cross-connect and is identified by a single
+               value of atmVpCrossConnectIndex.
+
+            Negotiated VP Cross-Connect Establishment
+
+          (2a) The manager creates a row in this table by
+               setting atmVpCrossConnectRowStatus to
+               createAndWait(5).  The agent checks the
+               requested topology and the mutual sanity of
+               the ATM traffic parameters and
+               service categories, i.e., the row creation
+               fails if:
+               - the requested topology is incompatible with
+                 associated values of atmVplCastType,
+               - the requested topology is not supported
+                 by the agent,
+               - the traffic/service category parameter values
+                 associated with the requested row are
+                 incompatible with those of already existing
+                 rows for this VP cross-connect.
+               [For example, for setting up
+               a point-to-point VP cross-connect, the
+               ATM traffic parameters in the receive direction
+               of a VPL at the low end of the cross-connect
+               must equal to the traffic parameters in the
+               transmit direction of the other VPL at the
+               high end of the cross-connect,
+               otherwise, the row creation fails.]
+               The agent also checks for internal errors
+               in building the cross-connect.
+
+               The atmVpCrossConnectIndex values in the
+               corresponding atmVplTable rows are filled
+               in by the agent at this point.
+
+          (2b) The manager promotes the row in the
+               atmVpCrossConnectTable by setting
+               atmVpCrossConnectRowStatus to active(1).  If
+               this set is successful, the agent has reserved
+               the resources specified by the ATM traffic
+               parameter and Service category values
+               for each direction of the VP cross-connect
+               in an ATM switch or network.
+
+           (3) The manager sets the
+               atmVpCrossConnectAdminStatus to up(1) in all
+               rows of this VP cross-connect to turn the
+               traffic flow on.
+
+
+            One-Shot VP Cross-Connect Establishment
+
+            A VP cross-connect may also be established in
+            one step by a set-request with all necessary
+            parameter values and atmVpCrossConnectRowStatus
+            set to createAndGo(4).
+
+            In contrast to the negotiated VP cross-connect
+            establishment which allows for detailed error
+            checking (i.e., set errors are explicitly linked
+            to particular resource acquisition failures),
+            the one-shot VP cross-connect establishment
+            performs the setup on one operation but does not
+            have the advantage of step-wise error checking.
+
+            VP Cross-Connect Retirement
+
+            A VP cross-connect identified by a particular
+            value of atmVpCrossConnectIndex is released by:
+
+           (1) Setting atmVpCrossConnectRowStatus of all
+               rows identified by this value of
+               atmVpCrossConnectIndex to destroy(6).
+               The agent may release all
+               associated resources, and the
+               atmVpCrossConnectIndex values in the
+               corresponding atmVplTable row are removed.
+               Note that a situation when only a subset of
+               the associated rows are deleted corresponds
+               to a VP topology change.
+
+           (2) After deletion of the appropriate
+               atmVpCrossConnectEntries, the manager may
+               set atmVplRowStatus to destroy(6) the
+               associated VPLs.  The agent releases
+               the resources and removes the associated
+               rows in the atmVplTable.
+
+            VP Cross-connect Reconfiguration
+
+            At the discretion of the agent, a VP
+            cross-connect may be reconfigured by
+            adding and/or deleting leafs to/from
+            the VP topology as per the VP cross-connect
+            establishment/retirement procedures.
+            Reconfiguration of traffic/service category parameter
+            values requires release of the VP cross-connect
+            before those parameter values may by changed
+            for individual VPLs."
+          INDEX { atmVpCrossConnectIndex,
+                atmVpCrossConnectLowIfIndex,
+                atmVpCrossConnectLowVpi,
+                atmVpCrossConnectHighIfIndex,
+                atmVpCrossConnectHighVpi }
+          ::= { atmVpCrossConnectTable 1 }
+
+     AtmVpCrossConnectEntry ::= SEQUENCE {
+          atmVpCrossConnectIndex          INTEGER,
+          atmVpCrossConnectLowIfIndex     InterfaceIndex,
+          atmVpCrossConnectLowVpi         AtmVpIdentifier,
+          atmVpCrossConnectHighIfIndex    InterfaceIndex,
+          atmVpCrossConnectHighVpi        AtmVpIdentifier,
+          atmVpCrossConnectAdminStatus    AtmVorXAdminStatus,
+          atmVpCrossConnectL2HOperStatus  AtmVorXOperStatus,
+          atmVpCrossConnectH2LOperStatus  AtmVorXOperStatus,
+          atmVpCrossConnectL2HLastChange  AtmVorXLastChange,
+          atmVpCrossConnectH2LLastChange  AtmVorXLastChange,
+          atmVpCrossConnectRowStatus      RowStatus
+                  }
+
+     atmVpCrossConnectIndex OBJECT-TYPE
+          SYNTAX         INTEGER (1..2147483647)
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "A unique value to identify this VP cross-connect.
+            For each VPL associated with this cross-connect,
+            the agent reports this cross-connect index value
+            in the atmVplCrossConnectIdentifier attribute of
+            the corresponding atmVplTable entries."
+          ::= { atmVpCrossConnectEntry 1 }
+
+     atmVpCrossConnectLowIfIndex OBJECT-TYPE
+          SYNTAX         InterfaceIndex
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The ifIndex value of the ATM interface for
+            this VP cross-connect. The term low implies
+            that this ATM interface has the numerically lower
+            ifIndex value than the other ATM interface
+            identified in the same atmVpCrossConnectEntry."
+          ::= { atmVpCrossConnectEntry 2 }
+
+     atmVpCrossConnectLowVpi OBJECT-TYPE
+          SYNTAX         AtmVpIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VPI value at the ATM interface
+            associated with the VP cross-connect that is
+            identified by atmVpCrossConnectLowIfIndex."
+          ::= { atmVpCrossConnectEntry 3 }
+
+     atmVpCrossConnectHighIfIndex OBJECT-TYPE
+          SYNTAX         InterfaceIndex
+          MAX-ACCESS     not-accessible
+          STATUS  current
+          DESCRIPTION
+           "The ifIndex value of the ATM interface for
+            this VP cross-connect. The term high implies that
+            this ATM interface has the numerically higher
+            ifIndex value than the  other ATM interface
+            identified in the same atmVpCrossConnectEntry."
+          ::= { atmVpCrossConnectEntry 4 }
+
+     atmVpCrossConnectHighVpi OBJECT-TYPE
+          SYNTAX         AtmVpIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VPI value at the ATM interface
+            associated with the VP cross-connect that is
+            identified by atmVpCrossConnectHighIfIndex."
+          ::= { atmVpCrossConnectEntry 5 }
+
+     atmVpCrossConnectAdminStatus OBJECT-TYPE
+          SYNTAX         AtmVorXAdminStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The desired administrative status of this
+            bi-directional VP cross-connect."
+          DEFVAL { down }
+          ::= { atmVpCrossConnectEntry 6 }
+
+     atmVpCrossConnectL2HOperStatus OBJECT-TYPE
+          SYNTAX         AtmVorXOperStatus
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The operational status of the VP cross-connect
+            in one direction; (i.e., from the low to
+            high direction)."
+          ::= { atmVpCrossConnectEntry 7 }
+
+     atmVpCrossConnectH2LOperStatus OBJECT-TYPE
+          SYNTAX         AtmVorXOperStatus
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The operational status of the VP cross-connect
+            in one direction; (i.e., from the high to
+            low direction)."
+          ::= { atmVpCrossConnectEntry 8 }
+
+     atmVpCrossConnectL2HLastChange OBJECT-TYPE
+          SYNTAX         AtmVorXLastChange
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The value of sysUpTime at the time this
+            VP cross-connect entered its current operational
+            state in the low to high direction."
+          ::= { atmVpCrossConnectEntry 9 }
+
+     atmVpCrossConnectH2LLastChange OBJECT-TYPE
+          SYNTAX         AtmVorXLastChange
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+            "The value of sysUpTime at the time this
+            VP cross-connect entered its current operational
+            in the high to low direction."
+          ::= { atmVpCrossConnectEntry 10 }
+
+     atmVpCrossConnectRowStatus OBJECT-TYPE
+          SYNTAX         RowStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The status of this entry in the
+            atmVpCrossConnectTable.  This object is used to
+            create a cross-connect for cross-connecting
+            VPLs which are created using the atmVplTable
+            or to change or delete an existing cross-connect.
+            This object must be initially set
+            to `createAndWait' or 'createAndGo'.
+            To turn on a VP cross-connect,
+            the atmVpCrossConnectAdminStatus
+            is set to `up'."
+          DEFVAL { createAndWait }
+          ::= { atmVpCrossConnectEntry 11 }
+
+
+     --     ATM Virtual Channel (VC) Cross Connect Table
+
+     -- This table contains configuration and state
+     -- information of point-to-point,
+     -- point-to-multipoint or multipoint-to-multipoint
+     -- VC cross-connects for PVCs.
+
+     -- This table has read-create access and is used
+     -- to cross-connect the VCLs together in an ATM switch
+     -- or network that belong to a VC connection.
+     -- The atmVcCrossConnectIndex is used to associate
+     -- the related VCLs that are cross-connected together.
+
+
+
+     -- The model using step-wise procedures described for setting
+     -- up a VP cross-connect is also used for setting up
+     -- a VC cross-connect.
+
+     atmVcCrossConnectIndexNext  OBJECT-TYPE
+          SYNTAX         INTEGER (0..2147483647)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "This object contains an appropriate value to
+            be used for atmVcCrossConnectIndex when creating
+            entries in the atmVcCrossConnectTable.  The value
+            0 indicates that no unassigned entries are
+            available. To obtain the atmVcCrossConnectIndex
+            value for a new entry, the manager issues a
+            management protocol retrieval operation to obtain
+            the current value of this object.  After each
+            retrieval, the agent should modify the value to
+            the next unassigned index.
+            After a manager retrieves a value the agent will
+            determine through its local policy when this index
+            value will be made available for reuse."
+          ::= { atmMIBObjects 10 }
+
+
+     --  The ATM VC Cross Connect Table
+
+
+     atmVcCrossConnectTable OBJECT-TYPE
+          SYNTAX         SEQUENCE OF AtmVcCrossConnectEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The ATM VC Cross Connect table for PVCs.
+            An entry in this table models two
+            cross-connected VCLs.
+            Each VCL must have its atmConnKind set
+            to pvc(1)."
+          ::= { atmMIBObjects 11 }
+
+
+     atmVcCrossConnectEntry OBJECT-TYPE
+          SYNTAX       AtmVcCrossConnectEntry
+          MAX-ACCESS   not-accessible
+          STATUS       current
+          DESCRIPTION
+           "An entry in the ATM VC Cross Connect table.
+            This entry is used to model a bi-directional ATM
+            VC cross-connect cross-connecting two end points.
+
+            Step-wise Procedures to set up a VC Cross-connect
+
+            Once the entries in the atmVclTable are created,
+            the following procedures are used
+            to cross-connect the VCLs together to
+            form a VCC segment.
+
+           (1) The manager obtains a unique
+               atmVcCrossConnectIndex by reading the
+               atmVcCrossConnectIndexNext object.
+
+           (2) Next, the manager creates a set of one
+               or more rows in the ATM VC Cross Connect
+               Table, one for each cross-connection between
+               two VCLs.  Each row is indexed by the ATM
+               interface port numbers and VPI/VCI values of
+               the two ends of that cross-connection.
+               This set of rows specifies the topology of the
+               VCC cross-connect and is identified by a single
+               value of atmVcCrossConnectIndex.
+
+            Negotiated VC Cross-Connect Establishment
+
+          (2a) The manager creates a row in this table by
+               setting atmVcCrossConnectRowStatus to
+               createAndWait(5).  The agent checks the
+               requested topology and the mutual sanity of
+               the ATM traffic parameters and
+               service categories, i.e., the row creation
+               fails if:
+               - the requested topology is incompatible with
+                 associated values of atmVclCastType,
+               - the requested topology is not supported
+                 by the agent,
+               - the traffic/service category parameter values
+                 associated with the requested row are
+                 incompatible with those of already existing
+                 rows for this VC cross-connect.
+               [For example, for setting up
+               a point-to-point VC cross-connect, the
+               ATM traffic parameters in the receive direction
+               of a VCL at the low end of the cross-connect
+               must equal to the traffic parameters in the
+               transmit direction of the other VCL at the
+               high end of the cross-connect,
+               otherwise, the row creation fails.]
+               The agent also checks for internal errors
+               in building the cross-connect.
+
+               The atmVcCrossConnectIndex values in the
+               corresponding atmVclTable rows are filled
+               in by the agent at this point.
+
+          (2b) The manager promotes the row in the
+               atmVcCrossConnectTable by setting
+               atmVcCrossConnectRowStatus to active(1).  If
+               this set is successful, the agent has reserved
+               the resources specified by the ATM traffic
+               parameter and Service category values
+               for each direction of the VC cross-connect
+               in an ATM switch or network.
+
+           (3) The manager sets the
+               atmVcCrossConnectAdminStatus to up(1)
+               in all rows of this VC cross-connect to
+               turn the traffic flow on.
+
+
+            One-Shot VC Cross-Connect Establishment
+
+            A VC cross-connect may also be established in
+            one step by a set-request with all necessary
+            parameter values and atmVcCrossConnectRowStatus
+            set to createAndGo(4).
+
+            In contrast to the negotiated VC cross-connect
+            establishment which allows for detailed error
+            checking i.e., set errors are explicitly linked to
+            particular resource acquisition failures), the
+            one-shot VC cross-connect establishment
+            performs the setup on one operation but does
+            not have the advantage of step-wise error
+            checking.
+
+            VC Cross-Connect Retirement
+
+            A VC cross-connect identified by a particular
+            value of atmVcCrossConnectIndex is released by:
+
+           (1) Setting atmVcCrossConnectRowStatus of all rows
+               identified by this value of
+               atmVcCrossConnectIndex to destroy(6).
+               The agent may release all
+               associated resources, and the
+               atmVcCrossConnectIndex values in the
+               corresponding atmVclTable row are removed.
+               Note that a situation when only a subset of
+               the associated rows are deleted corresponds
+               to a VC topology change.
+
+           (2) After deletion of the appropriate
+               atmVcCrossConnectEntries, the manager may
+               set atmVclRowStatus to destroy(6) the
+               associated VCLs.  The agent releases
+               the resources and removes the associated
+               rows in the atmVclTable.
+
+            VC Cross-Connect Reconfiguration
+
+            At the discretion of the agent, a VC
+            cross-connect may be reconfigured by
+            adding and/or deleting leafs to/from
+            the VC topology as per the VC cross-connect
+            establishment/retirement procedures.
+            Reconfiguration of traffic/service category parameter
+            values requires release of the VC cross-connect
+            before those parameter values may by changed
+            for individual VCLs."
+          INDEX { atmVcCrossConnectIndex,
+                atmVcCrossConnectLowIfIndex,
+                atmVcCrossConnectLowVpi,
+                atmVcCrossConnectLowVci,
+                atmVcCrossConnectHighIfIndex,
+                atmVcCrossConnectHighVpi,
+                atmVcCrossConnectHighVci }
+          ::= { atmVcCrossConnectTable 1 }
+
+     AtmVcCrossConnectEntry ::= SEQUENCE {
+          atmVcCrossConnectIndex          INTEGER,
+          atmVcCrossConnectLowIfIndex     InterfaceIndex,
+          atmVcCrossConnectLowVpi         AtmVpIdentifier,
+          atmVcCrossConnectLowVci         AtmVcIdentifier,
+          atmVcCrossConnectHighIfIndex    InterfaceIndex,
+          atmVcCrossConnectHighVpi        AtmVpIdentifier,
+          atmVcCrossConnectHighVci        AtmVcIdentifier,
+          atmVcCrossConnectAdminStatus    AtmVorXAdminStatus,
+          atmVcCrossConnectL2HOperStatus  AtmVorXOperStatus,
+          atmVcCrossConnectH2LOperStatus  AtmVorXOperStatus,
+          atmVcCrossConnectL2HLastChange  AtmVorXLastChange,
+          atmVcCrossConnectH2LLastChange  AtmVorXLastChange,
+          atmVcCrossConnectRowStatus      RowStatus
+                  }
+
+     atmVcCrossConnectIndex OBJECT-TYPE
+          SYNTAX         INTEGER (1..2147483647)
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "A unique value to identify this VC cross-connect.
+            For each VCL associated with this cross-connect,
+            the agent reports this cross-connect index value
+            in the atmVclCrossConnectIdentifier attribute of
+            the corresponding atmVclTable entries."
+          ::= { atmVcCrossConnectEntry 1 }
+
+     atmVcCrossConnectLowIfIndex OBJECT-TYPE
+          SYNTAX         InterfaceIndex
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The ifIndex value of the ATM interface for this
+            VC cross-connect. The term low implies
+            that this ATM interface has the numerically lower
+            ifIndex value than the other ATM interface
+            identified in the same atmVcCrossConnectEntry."
+          ::= { atmVcCrossConnectEntry 2 }
+
+     atmVcCrossConnectLowVpi OBJECT-TYPE
+          SYNTAX         AtmVpIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VPI value at the ATM interface
+            associated with the VC cross-connect that is
+            identified by atmVcCrossConnectLowIfIndex."
+          ::= { atmVcCrossConnectEntry 3 }
+
+     atmVcCrossConnectLowVci OBJECT-TYPE
+          SYNTAX         AtmVcIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VCI value at the ATM interface
+            associated with this VC cross-connect that is
+            identified by atmVcCrossConnectLowIfIndex."
+          ::= { atmVcCrossConnectEntry 4 }
+
+     atmVcCrossConnectHighIfIndex OBJECT-TYPE
+          SYNTAX         InterfaceIndex
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The ifIndex value for the ATM interface for
+            this VC cross-connect. The term high implies
+            that this ATM interface has the numerically higher
+            ifIndex value than the other ATM interface
+            identified in the same atmVcCrossConnectEntry."
+          ::= { atmVcCrossConnectEntry 5 }
+
+     atmVcCrossConnectHighVpi OBJECT-TYPE
+          SYNTAX         AtmVpIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VPI value at the ATM interface
+            associated with the VC cross-connect that is
+            identified by atmVcCrossConnectHighIfIndex."
+          ::= { atmVcCrossConnectEntry 6 }
+
+     atmVcCrossConnectHighVci OBJECT-TYPE
+          SYNTAX         AtmVcIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VCI value at the ATM interface
+            associated with the VC cross-connect that is
+            identified by atmVcCrossConnectHighIfIndex."
+          ::= { atmVcCrossConnectEntry 7 }
+
+     atmVcCrossConnectAdminStatus OBJECT-TYPE
+          SYNTAX         AtmVorXAdminStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The desired administrative status of this
+            bi-directional VC cross-connect."
+          DEFVAL { down }
+          ::= { atmVcCrossConnectEntry 8 }
+
+     atmVcCrossConnectL2HOperStatus OBJECT-TYPE
+          SYNTAX         AtmVorXOperStatus
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The current operational status of the
+            VC cross-connect in one direction; (i.e.,
+            from the low to high direction)."
+          ::= { atmVcCrossConnectEntry 9 }
+
+
+     atmVcCrossConnectH2LOperStatus OBJECT-TYPE
+          SYNTAX         AtmVorXOperStatus
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The current operational status of the
+            VC cross-connect in one direction; (i.e.,
+            from the high to low direction)."
+          ::= { atmVcCrossConnectEntry 10 }
+
+     atmVcCrossConnectL2HLastChange OBJECT-TYPE
+          SYNTAX         AtmVorXLastChange
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The value of sysUpTime at the time this
+            VC cross-connect entered its current
+            operational state in low to high direction."
+          ::= { atmVcCrossConnectEntry 11 }
+
+     atmVcCrossConnectH2LLastChange OBJECT-TYPE
+          SYNTAX         AtmVorXLastChange
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The value of sysUpTime at the time this
+            VC cross-connect entered its current
+            operational state in high to low direction."
+          ::= { atmVcCrossConnectEntry 12 }
+
+     atmVcCrossConnectRowStatus OBJECT-TYPE
+          SYNTAX         RowStatus
+          MAX-ACCESS     read-create
+          STATUS         current
+          DESCRIPTION
+           "The status of this entry in the
+            atmVcCrossConnectTable.  This object is used to
+            create a new cross-connect for cross-connecting
+            VCLs which are created using the atmVclTable
+            or to change or delete existing cross-connect.
+            This object must be initially set to
+            `createAndWait' or 'createAndGo'.
+            To turn on a VC cross-connect,
+            the atmVcCrossConnectAdminStatus
+            is set to `up'."
+          DEFVAL { createAndWait }
+          ::= { atmVcCrossConnectEntry 13 }
+
+
+     -- AAL5 Virtual Channel Connection Performance Statistics
+     -- Table
+
+     -- This table contains the AAL5
+     -- performance statistics of a VCC at the
+     -- interface associated with an AAL5 entity in an ATM
+     -- host or ATM switch.
+
+
+     aal5VccTable        OBJECT-TYPE
+          SYNTAX         SEQUENCE OF Aal5VccEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This table contains AAL5 VCC performance
+            parameters."
+          ::= { atmMIBObjects 12 }
+
+     aal5VccEntry        OBJECT-TYPE
+          SYNTAX         Aal5VccEntry
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "This list contains the AAL5 VCC
+            performance parameters and is indexed
+            by ifIndex values of AAL5 interfaces
+            and the associated VPI/VCI values."
+          INDEX { ifIndex, aal5VccVpi, aal5VccVci }
+          ::= { aal5VccTable 1 }
+
+     Aal5VccEntry    ::= SEQUENCE  {
+          aal5VccVpi             AtmVpIdentifier,
+          aal5VccVci             AtmVcIdentifier,
+          aal5VccCrcErrors       Counter32,
+          aal5VccSarTimeOuts     Counter32,
+          aal5VccOverSizedSDUs   Counter32
+               }
+
+
+     aal5VccVpi          OBJECT-TYPE
+          SYNTAX         AtmVpIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VPI value of the AAL5 VCC at the
+            interface identified by the ifIndex."
+          ::= { aal5VccEntry 1 }
+
+     aal5VccVci          OBJECT-TYPE
+          SYNTAX         AtmVcIdentifier
+          MAX-ACCESS     not-accessible
+          STATUS         current
+          DESCRIPTION
+           "The VCI value of the AAL5 VCC at the
+            interface identified by the ifIndex."
+          ::= { aal5VccEntry 2 }
+
+     aal5VccCrcErrors    OBJECT-TYPE
+          SYNTAX         Counter32
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The number of AAL5 CPCS PDUs received with
+            CRC-32 errors on this AAL5 VCC at the
+            interface associated with an AAL5 entity."
+          ::= { aal5VccEntry 3 }
+
+     aal5VccSarTimeOuts  OBJECT-TYPE
+          SYNTAX         Counter32
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The number of partially re-assembled AAL5
+            CPCS PDUs which were discarded
+            on this AAL5 VCC at the interface associated
+            with an AAL5 entity because they
+            were not fully re-assembled within the
+            required time period.  If the re-assembly
+            timer is not supported, then this object
+            contains a zero value."
+          ::= { aal5VccEntry 4 }
+
+     aal5VccOverSizedSDUs OBJECT-TYPE
+          SYNTAX         Counter32
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "The number of AAL5 CPCS PDUs discarded
+            on this AAL5 VCC at the interface
+            associated with an AAL5 entity because the
+            AAL5 SDUs were too large."
+          ::= { aal5VccEntry 5 }
+
+
+     --
+     -- The following object may be used in conjunction with
+     -- the atmTrafficDescrParamTable for the creation of
+     -- new table entries.
+     --
+
+     atmTrafficDescrParamIndexNext  OBJECT-TYPE
+          SYNTAX         INTEGER (0..2147483647)
+          MAX-ACCESS     read-only
+          STATUS         current
+          DESCRIPTION
+           "This object contains an appropriate value to
+            be used for atmTrafficDescrParamIndex when
+            creating entries in the
+            atmTrafficDescrParamTable.
+            The value 0 indicates that no unassigned
+            entries are available. To obtain the
+            atmTrafficDescrParamIndex value for a new
+            entry, the manager issues a management
+            protocol retrieval operation to obtain the
+            current value of this object.  After each
+            retrieval, the agent should modify the value
+            to the next unassigned index.
+            After a manager retrieves a value the agent will
+            determine through its local policy when this index
+            value will be made available for reuse."
+          ::= { atmMIBObjects 13 }
+
+
+     -- Conformance Information
+
+     atmMIBConformance   OBJECT IDENTIFIER ::= { atmMIB 2 }
+
+     atmMIBGroups        OBJECT IDENTIFIER
+                                ::= { atmMIBConformance 1 }
+     atmMIBCompliances   OBJECT IDENTIFIER
+                                ::= { atmMIBConformance 2 }
+
+
+     -- Compliance Statements
+
+     atmMIBCompliance2    MODULE-COMPLIANCE
+          STATUS         current
+          DESCRIPTION
+            "The compliance statement for SNMP entities
+             including networks which have ATM and
+             AAL5 interfaces."
+
+          MODULE -- this module
+     --
+     -- ****** Interface and Traffic Descriptor Support ***
+     --
+            MANDATORY-GROUPS  {atmInterfaceConfGroup2,
+                               atmTrafficDescrGroup2 }
+
+            OBJECT         atmInterfaceMaxVpcs
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMaxVccs
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMaxActiveVpiBits
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required.
+               At the ATM UNI the maximum number of
+               active VPI bits configured for use ranges
+               from 0 to 8 only.
+               Implementations may support smaller ranges."
+
+            OBJECT         atmInterfaceMaxActiveVciBits
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required.
+               Implementations may support smaller ranges."
+
+            OBJECT         atmInterfaceIlmiVpi
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceIlmiVci
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMyNeighborIpAddress
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMyNeighborIfName
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceSubscrAddress
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParamIndexNext
+            DESCRIPTION
+              "This object is only required for systems
+               that support the creation of entries in
+               the atmTrafficDescrParamTable."
+
+            OBJECT         atmTrafficDescrType
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam1
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam2
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam3
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam4
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam5
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmServiceCategory
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrRowStatus
+            SYNTAX         INTEGER {active(1)}
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+            OBJECT         atmTrafficFrameDiscard
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+     --
+     -- ****** DS3 PLCP Support **************************
+     --
+            GROUP          atmInterfaceDs3PlcpGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement the
+               DS3 PLCP layer."
+     --
+     -- ****** TC Sublayer Support ********************************
+     --
+            GROUP          atmInterfaceTCGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement the
+               TC Sublayer."
+
+     --
+     -- ****** VPC Support *******************************
+     --
+            GROUP          atmVpcTerminationGroup2
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VPLs that terminate VPCs (i.e., ones which
+               are NOT cross-connected to other VPLs)."
+
+            GROUP          atmVplCrossConnectGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VPLs that are not associated with VCLs
+               and are cross-connected to other VPLs
+               for VPCs."
+
+            GROUP          atmVpPvcCrossConnectGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VPLs that are not associated with VCLs
+               and are cross-connected to other VPLs
+               for permanent VPCs (i.e., PVCs).
+               This group is not used to crossconnect
+               a PVC with an SVC to form a Soft PVC."
+
+            OBJECT         atmVplAdminStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVplReceiveTrafficDescrIndex
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVplTransmitTrafficDescrIndex
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVplRowStatus
+            SYNTAX         INTEGER {active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS      read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+            OBJECT         atmVplCastType
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVplConnKind
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVpCrossConnectAdminStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVpCrossConnectRowStatus
+            SYNTAX         INTEGER {active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+     --
+     -- ****** VCC Support *******************************
+     --
+            GROUP          atmVccTerminationGroup2
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VCLs that terminate VCCs (i.e., ones which
+               are NOT cross-connected to other VCLs)."
+
+            GROUP          atmVclCrossConnectGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VCLs that are cross-connected to other VCLs
+               for VCCs."
+
+            GROUP          atmVcPvcCrossConnectGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VCLs that are cross-connected to other
+               VCLs for permanent VCCs (i.e., PVCs).
+               This group is not used to crossconnect
+               a PVC with an SVC to form a Soft PVC."
+
+            OBJECT         atmVclAdminStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVclReceiveTrafficDescrIndex
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVclTransmitTrafficDescrIndex
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVccAalType
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVclRowStatus
+            SYNTAX         INTEGER {active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+            OBJECT         atmVclCastType
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVclConnKind
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVcCrossConnectAdminStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVcCrossConnectRowStatus
+            SYNTAX         INTEGER { active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+     --
+     -- ****** AAL5 Support ******************************
+     --
+            GROUP          aal5VccGroup
+
+            DESCRIPTION
+              "This group is mandatory for the
+               AAL5 virtual connections only."
+            OBJECT         atmVccAal5CpcsTransmitSduSize
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVccAal5CpcsReceiveSduSize
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVccAal5EncapsType
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+             ::= { atmMIBCompliances 2 }
+
+
+     -- Units of Conformance
+
+     atmInterfaceDs3PlcpGroup    OBJECT-GROUP
+            OBJECTS {atmInterfaceDs3PlcpSEFSs,
+                atmInterfaceDs3PlcpAlarmState,
+                atmInterfaceDs3PlcpUASs}
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing information
+                about DS3 PLCP layer at an ATM interface."
+            ::= { atmMIBGroups 3 }
+
+     atmInterfaceTCGroup    OBJECT-GROUP
+            OBJECTS { atmInterfaceOCDEvents,
+                atmInterfaceTCAlarmState }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing information
+                about TC sublayer at an ATM interface."
+            ::= { atmMIBGroups 4 }
+
+     aal5VccGroup    OBJECT-GROUP
+            OBJECTS {atmVccAal5CpcsTransmitSduSize,
+                atmVccAal5CpcsReceiveSduSize,
+                atmVccAal5EncapsType,
+                aal5VccCrcErrors, aal5VccSarTimeOuts,
+                aal5VccOverSizedSDUs }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing
+                AAL5 configuration and performance statistics
+                of a VCC."
+            ::= { atmMIBGroups 9 }
+
+     atmInterfaceConfGroup2    OBJECT-GROUP
+            OBJECTS {
+                  atmInterfaceMaxVpcs, atmInterfaceMaxVccs,
+                  atmInterfaceConfVpcs, atmInterfaceConfVccs,
+                  atmInterfaceMaxActiveVpiBits,
+                  atmInterfaceMaxActiveVciBits,
+                  atmInterfaceIlmiVpi,
+                  atmInterfaceIlmiVci,
+                  atmInterfaceMyNeighborIpAddress,
+                  atmInterfaceMyNeighborIfName,
+                  atmInterfaceCurrentMaxVpiBits,
+                  atmInterfaceCurrentMaxVciBits,
+                  atmInterfaceSubscrAddress }
+            STATUS     current
+            DESCRIPTION
+              "A collection of objects providing configuration
+               information about an ATM interface."
+            ::= { atmMIBGroups 10 }
+
+     atmTrafficDescrGroup2    OBJECT-GROUP
+            OBJECTS {
+                atmTrafficDescrType, atmTrafficDescrParam1,
+                atmTrafficDescrParam2, atmTrafficDescrParam3,
+                atmTrafficDescrParam4, atmTrafficDescrParam5,
+                atmTrafficDescrRowStatus, atmServiceCategory,
+                atmTrafficFrameDiscard,
+                atmTrafficDescrParamIndexNext }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing information
+                about ATM traffic descriptor type and
+                the associated parameters."
+            ::= { atmMIBGroups 11 }
+
+     atmVpcTerminationGroup2    OBJECT-GROUP
+            OBJECTS  {atmVplOperStatus, atmVplAdminStatus,
+                atmVplLastChange,
+                atmVplReceiveTrafficDescrIndex,
+                atmVplTransmitTrafficDescrIndex,
+                atmVplRowStatus, atmVplCastType,
+                atmVplConnKind }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing information
+                about a VPL at an ATM interface which
+                terminates a VPC (i.e., one which is NOT
+                cross-connected to other VPLs)."
+            ::= { atmMIBGroups 12 }
+
+     atmVccTerminationGroup2    OBJECT-GROUP
+            OBJECTS {atmVclOperStatus, atmVclAdminStatus,
+                 atmVclLastChange,
+                 atmVclReceiveTrafficDescrIndex,
+                 atmVclTransmitTrafficDescrIndex,
+                 atmVccAalType, atmVclRowStatus,
+                 atmVclCastType, atmVclConnKind }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing information
+                about a VCL at an ATM interface
+                which terminates a VCC (i.e., one which is
+                NOT cross-connected to other VCLs)."
+            ::= { atmMIBGroups 13 }
+
+     atmVplCrossConnectGroup    OBJECT-GROUP
+            OBJECTS { atmVplReceiveTrafficDescrIndex,
+                atmVplTransmitTrafficDescrIndex,
+                atmVplOperStatus, atmVplLastChange,
+                atmVplRowStatus,
+                atmVplCastType, atmVplConnKind }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing
+                information about the VPLs that
+                are cross-connected together."
+            ::= { atmMIBGroups 14 }
+
+     atmVpPvcCrossConnectGroup    OBJECT-GROUP
+            OBJECTS { atmVpCrossConnectAdminStatus,
+                atmVpCrossConnectL2HOperStatus,
+                atmVpCrossConnectH2LOperStatus,
+                atmVpCrossConnectL2HLastChange,
+                atmVpCrossConnectH2LLastChange,
+                atmVpCrossConnectRowStatus,
+                atmVplCrossConnectIdentifier,
+                atmVpCrossConnectIndexNext }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing
+                information about a VP cross-connect
+                for PVCs. These objects are not used
+                for Soft PVCs or SVCs."
+            ::= { atmMIBGroups 15 }
+
+     atmVclCrossConnectGroup    OBJECT-GROUP
+            OBJECTS { atmVclReceiveTrafficDescrIndex,
+                atmVclTransmitTrafficDescrIndex,
+                atmVclOperStatus, atmVclLastChange,
+                atmVclRowStatus,
+                atmVclCastType, atmVclConnKind }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing
+                information about the VCLs that
+                are cross-connected together."
+            ::= { atmMIBGroups 16 }
+
+     atmVcPvcCrossConnectGroup    OBJECT-GROUP
+            OBJECTS { atmVcCrossConnectAdminStatus,
+                atmVcCrossConnectL2HOperStatus,
+                atmVcCrossConnectH2LOperStatus,
+                atmVcCrossConnectL2HLastChange,
+                atmVcCrossConnectH2LLastChange,
+                atmVcCrossConnectRowStatus,
+                atmVclCrossConnectIdentifier,
+                atmVcCrossConnectIndexNext }
+            STATUS     current
+            DESCRIPTION
+               "A collection of objects providing
+                information about a VC cross-connect
+                for PVCs. These objects are not used
+                for Soft PVCs or SVCs."
+            ::= { atmMIBGroups 17 }
+
+
+     -- Deprecated Definitions - Objects
+
+     -- atmInterfaceAddressType
+     -- atmTrafficQoSClass
+
+
+     -- Deprecated Definitions - Compliance
+
+     atmMIBCompliance    MODULE-COMPLIANCE
+          STATUS         deprecated
+          DESCRIPTION
+            "The compliance statement for SNMP entities
+             including networks which have ATM and
+             AAL5 interfaces."
+
+          MODULE -- this module
+            MANDATORY-GROUPS  {atmInterfaceConfGroup,
+                               atmTrafficDescrGroup}
+
+            OBJECT         atmInterfaceMaxVpcs
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMaxVccs
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMaxActiveVpiBits
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMaxActiveVciBits
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceIlmiVpi
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceIlmiVci
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMyNeighborIpAddress
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmInterfaceMyNeighborIfName
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrType
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam1
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam2
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam3
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam4
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrParam5
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficQoSClass
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmTrafficDescrRowStatus
+            SYNTAX         INTEGER {active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+            GROUP          atmInterfaceDs3PlcpGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement the
+               DS3 PLCP layer."
+
+            GROUP          atmInterfaceTCGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement the
+               TC Sublayer."
+
+            GROUP          atmVpcTerminationGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VPLs that terminate VPCs (i.e., ones which
+               are NOT cross-connected to other VPLs)."
+
+            GROUP          atmVpCrossConnectGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VPLs that are not associated with VCLs
+               and are cross-connected to other VPLs."
+
+            OBJECT         atmVplAdminStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVplReceiveTrafficDescrIndex
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVplTransmitTrafficDescrIndex
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVplRowStatus
+            SYNTAX         INTEGER {active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS      read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+            OBJECT         atmVpCrossConnectAdminStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVpCrossConnectRowStatus
+            SYNTAX         INTEGER {active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+            GROUP          atmVccTerminationGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VCLs that terminate VCCs (i.e., ones which
+               are NOT cross-connected to other VCLs)."
+
+            GROUP          atmVcCrossConnectGroup
+            DESCRIPTION
+              "This group is mandatory only for those
+               ATM interfaces which implement ATM
+               VCLs that are cross-connected to
+               other VCLs."
+
+            OBJECT         atmVclAdminStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVclReceiveTrafficDescrIndex
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVclTransmitTrafficDescrIndex
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVccAalType
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVclRowStatus
+            SYNTAX         INTEGER {active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+            OBJECT         atmVcCrossConnectAdminStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVcCrossConnectRowStatus
+            SYNTAX         INTEGER { active(1)}
+                             -- subset of RowStatus
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required, and only one
+               of the six enumerated values for the
+               RowStatus textual convention need be
+               supported, specifically: active(1)."
+
+            GROUP          aal5VccGroup
+            DESCRIPTION
+              "This group is mandatory for the
+               AAL5 virtual connections only."
+
+            OBJECT         atmVccAal5CpcsTransmitSduSize
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVccAal5CpcsReceiveSduSize
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+
+            OBJECT         atmVccAal5EncapsType
+            MIN-ACCESS     read-only
+            DESCRIPTION
+              "Write access is not required."
+             ::= { atmMIBCompliances 1 }
+
+
+     -- Deprecated Definitions - Groups
+
+     atmInterfaceConfGroup    OBJECT-GROUP
+            OBJECTS {
+                  atmInterfaceMaxVpcs, atmInterfaceMaxVccs,
+                  atmInterfaceConfVpcs, atmInterfaceConfVccs,
+                  atmInterfaceMaxActiveVpiBits,
+                  atmInterfaceMaxActiveVciBits,
+                  atmInterfaceIlmiVpi,
+                  atmInterfaceIlmiVci,
+                  atmInterfaceAddressType,
+                  atmInterfaceAdminAddress,
+                  atmInterfaceMyNeighborIpAddress,
+                  atmInterfaceMyNeighborIfName }
+            STATUS     deprecated
+            DESCRIPTION
+              "A collection of objects providing configuration
+               information about an ATM interface."
+            ::= { atmMIBGroups 1 }
+
+     atmTrafficDescrGroup    OBJECT-GROUP
+            OBJECTS {
+                atmTrafficDescrType, atmTrafficDescrParam1,
+                atmTrafficDescrParam2, atmTrafficDescrParam3,
+                atmTrafficDescrParam4, atmTrafficDescrParam5,
+                atmTrafficQoSClass, atmTrafficDescrRowStatus}
+            STATUS     deprecated
+            DESCRIPTION
+               "A collection of objects providing information
+                about ATM traffic descriptor type and
+                the associated parameters."
+            ::= { atmMIBGroups 2 }
+
+     atmVpcTerminationGroup    OBJECT-GROUP
+            OBJECTS  {atmVplOperStatus, atmVplAdminStatus,
+                atmVplLastChange,
+                atmVplReceiveTrafficDescrIndex,
+                atmVplTransmitTrafficDescrIndex,
+                atmVplRowStatus }
+            STATUS     deprecated
+            DESCRIPTION
+               "A collection of objects providing
+                information about a VPL at an ATM interface
+                which terminates a VPC
+                (i.e., one which is NOT cross-connected
+                to other VPLs)."
+            ::= { atmMIBGroups 5 }
+
+     atmVccTerminationGroup    OBJECT-GROUP
+            OBJECTS {atmVclOperStatus, atmVclAdminStatus,
+                atmVclLastChange,
+                 atmVclReceiveTrafficDescrIndex,
+                 atmVclTransmitTrafficDescrIndex,
+                 atmVccAalType, atmVclRowStatus }
+            STATUS     deprecated
+            DESCRIPTION
+               "A collection of objects providing information
+                about a VCL at an ATM interface
+                which terminates a VCC (i.e., one which is
+                NOT cross-connected to other VCLs)."
+            ::= { atmMIBGroups 6 }
+
+     atmVpCrossConnectGroup    OBJECT-GROUP
+            OBJECTS { atmVplReceiveTrafficDescrIndex,
+                atmVplTransmitTrafficDescrIndex,
+                atmVplOperStatus, atmVplRowStatus,
+                atmVpCrossConnectAdminStatus,
+                atmVpCrossConnectL2HOperStatus,
+                atmVpCrossConnectH2LOperStatus,
+                atmVpCrossConnectL2HLastChange,
+                atmVpCrossConnectH2LLastChange,
+                atmVpCrossConnectRowStatus,
+                atmVplCrossConnectIdentifier,
+                atmVpCrossConnectIndexNext }
+            STATUS     deprecated
+            DESCRIPTION
+               "A collection of objects providing
+                information about a VP cross-connect
+                and the associated VPLs that are
+                cross-connected together."
+            ::= { atmMIBGroups 7 }
+
+     atmVcCrossConnectGroup    OBJECT-GROUP
+            OBJECTS { atmVclReceiveTrafficDescrIndex,
+                atmVclTransmitTrafficDescrIndex,
+                atmVclOperStatus, atmVclRowStatus,
+                atmVcCrossConnectAdminStatus,
+                atmVcCrossConnectL2HOperStatus,
+                atmVcCrossConnectH2LOperStatus,
+                atmVcCrossConnectL2HLastChange,
+                atmVcCrossConnectH2LLastChange,
+                atmVcCrossConnectRowStatus,
+                atmVclCrossConnectIdentifier,
+                atmVcCrossConnectIndexNext }
+            STATUS     deprecated
+            DESCRIPTION
+               "A collection of objects providing
+                information about a VC cross-connect
+                and the associated VCLs that are
+                cross-connected together."
+            ::= { atmMIBGroups 8 }
+
+
+     -- {atmMIB 3} has been used by [19].
+
+     END