summaryrefslogtreecommitdiff
path: root/MIBS/junos/OPT-IF-MIB
diff options
context:
space:
mode:
authorDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
committerDavid Leutgeb <david.leutgeb@mannundmouse.com>2023-12-05 12:25:34 +0100
commit98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch)
tree9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/junos/OPT-IF-MIB
downloadmibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.tar.gz
mibs-98a672123c7872f6b9b75a9a2b6bb3aea504de6a.zip
Initial commitHEADmain
Diffstat (limited to 'MIBS/junos/OPT-IF-MIB')
-rw-r--r--MIBS/junos/OPT-IF-MIB6261
1 files changed, 6261 insertions, 0 deletions
diff --git a/MIBS/junos/OPT-IF-MIB b/MIBS/junos/OPT-IF-MIB
new file mode 100644
index 0000000..b9e0d31
--- /dev/null
+++ b/MIBS/junos/OPT-IF-MIB
@@ -0,0 +1,6261 @@
+OPT-IF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Integer32,
+ Unsigned32, transmission
+ FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, RowPointer, RowStatus, TruthValue
+ FROM SNMPv2-TC
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ ifIndex
+ FROM IF-MIB;
+
+-- This is the MIB module for the OTN Interface objects.
+
+optIfMibModule MODULE-IDENTITY
+ LAST-UPDATED "200308130000Z"
+ ORGANIZATION "IETF AToM MIB Working Group"
+ CONTACT-INFO
+ "WG charter:
+ http://www.ietf.org/html.charters/atommib-charter.html
+
+ Mailing Lists:
+ General Discussion: atommib@research.telcordia.com
+ To Subscribe: atommib-request@research.telcordia.com
+ Editor: Hing-Kam Lam
+ Postal: Lucent Technologies, Room 4C-616
+ 101 Crawfords Corner Road
+ Holmdel, NJ 07733
+ Tel: +1 732 949 8338
+ Email: hklam@lucent.com"
+ DESCRIPTION
+ "The MIB module to describe pre-OTN and OTN interfaces.
+
+ Copyright (C) The Internet Society (2003). This version
+ of this MIB module is part of RFC 3591; see the RFC
+ itself for full legal notices."
+ REVISION "200308130000Z"
+ DESCRIPTION
+ "Initial version, published as RFC 3591."
+ ::={ transmission 133 }
+
+-- textual conventions
+
+OptIfAcTI ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The trace identifier (TI) accepted at the receiver."
+ SYNTAX OCTET STRING (SIZE(64))
+
+OptIfBitRateK ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Indicates the index 'k' that is used to
+ represent a supported bit rate and the different
+ versions of OPUk, ODUk and OTUk.
+ Allowed values of k are defined in ITU-T G.709.
+ Currently allowed values in G.709 are:
+ k=1 represents an approximate bit rate of 2.5 Gbit/s,
+ k=2 represents an approximate bit rate of 10 Gbit/s,
+ k=3 represents an approximate bit rate of 40 Gbit/s."
+ SYNTAX Integer32
+
+OptIfDEGM ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a Degraded Signal
+ defect (dDEG). A dDEG shall be declared if OptIfDEGM
+ consecutive bad PM Seconds are detected."
+ SYNTAX Unsigned32 (2..10)
+
+OptIfDEGThr ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a performance
+ monitoring (PM) Second to be bad. A PM Second is declared bad if
+ the percentage of detected errored blocks in that second is
+ greater than or equal to OptIfDEGThr."
+ SYNTAX Unsigned32 (1..100)
+
+OptIfDirectionality ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of an entity."
+ SYNTAX INTEGER {
+ sink(1),
+ source(2),
+ bidirectional(3)
+ }
+
+OptIfSinkOrSource ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of an entity
+ that is allowed only to be a source or sink."
+ SYNTAX INTEGER {
+ sink(1),
+ source(2)
+ }
+
+OptIfExDAPI ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The Destination Access Point Identifier (DAPI)
+ expected by the receiver."
+ SYNTAX OCTET STRING (SIZE(16))
+
+OptIfExSAPI ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The Source Access Point Identifier (SAPI)
+ expected by the receiver."
+ SYNTAX OCTET STRING (SIZE(16))
+
+OptIfIntervalNumber ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies a 15-minute interval. The interval
+ identified by 1 is the most recently completed interval, and
+ the interval identified by n is the interval immediately
+ preceding the one identified by n-1."
+ SYNTAX Unsigned32 (1..96)
+
+OptIfTIMDetMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of the Trace Identifier Mismatch (TIM)
+ Detection function."
+ SYNTAX INTEGER {
+ off(1),
+ dapi(2),
+ sapi(3),
+ both(4)
+ }
+
+OptIfTxTI ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The trace identifier (TI) transmitted."
+ SYNTAX OCTET STRING (SIZE(64))
+
+-- object groups
+
+optIfObjects OBJECT IDENTIFIER ::= { optIfMibModule 1 }
+optIfConfs OBJECT IDENTIFIER ::= { optIfMibModule 2 }
+
+optIfOTMn OBJECT IDENTIFIER ::= { optIfObjects 1 }
+optIfPerfMon OBJECT IDENTIFIER ::= { optIfObjects 2 }
+optIfOTSn OBJECT IDENTIFIER ::= { optIfObjects 3 }
+optIfOMSn OBJECT IDENTIFIER ::= { optIfObjects 4 }
+optIfOChGroup OBJECT IDENTIFIER ::= { optIfObjects 5 }
+optIfOCh OBJECT IDENTIFIER ::= { optIfObjects 6 }
+
+optIfOTUk OBJECT IDENTIFIER ::= { optIfObjects 7 }
+optIfODUk OBJECT IDENTIFIER ::= { optIfObjects 8 }
+optIfODUkT OBJECT IDENTIFIER ::= { optIfObjects 9 }
+
+optIfGroups OBJECT IDENTIFIER ::= { optIfConfs 1 }
+optIfCompl OBJECT IDENTIFIER ::= { optIfConfs 2 }
+
+-- the optIfOTMn group
+-- This group defines the OTM structure information of an
+-- optical interface.
+
+-- OTMn Table
+
+optIfOTMnTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTMnEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OTMn structure information."
+ ::= { optIfOTMn 1 }
+
+optIfOTMnEntry OBJECT-TYPE
+ SYNTAX OptIfOTMnEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains the OTMn structure
+ information of an optical interface."
+ INDEX { ifIndex }
+ ::= { optIfOTMnTable 1 }
+
+OptIfOTMnEntry ::=
+ SEQUENCE {
+ optIfOTMnOrder Unsigned32,
+ optIfOTMnReduced TruthValue,
+ optIfOTMnBitRates BITS,
+ optIfOTMnInterfaceType SnmpAdminString,
+ optIfOTMnTcmMax Unsigned32,
+ optIfOTMnOpticalReach INTEGER
+ }
+
+optIfOTMnOrder OBJECT-TYPE
+ SYNTAX Unsigned32 (1..900)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the order of the OTM, which
+ represents the maximum number of wavelengths that can be
+ supported at the bit rate(s) supported on the interface."
+ ::= { optIfOTMnEntry 1 }
+
+optIfOTMnReduced OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates whether a reduced or full
+ functionality is supported at the interface. A value of
+ true means reduced. A value of false means full."
+ ::= { optIfOTMnEntry 2 }
+
+optIfOTMnBitRates OBJECT-TYPE
+ SYNTAX BITS { bitRateK1(0), bitRateK2(1), bitRateK3(2) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This attribute is a bit map representing the bit
+ rate or set of bit rates supported on the interface.
+ The meaning of each bit position is as follows:
+ bitRateK1(0) is set if the 2.5 Gbit/s rate is supported
+ bitRateK2(1) is set if the 10 Gbit/s rate is supported
+ bitRateK3(2) is set if the 40 Gbit/s rate is supported
+ Note that each bit position corresponds to one possible
+ value of the type OptIfBitRateK.
+ The default value of this attribute is system specific."
+ ::= { optIfOTMnEntry 3 }
+
+optIfOTMnInterfaceType OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object identifies the type of interface. The value of
+ this attribute will affect the behavior of the OTM with
+ respect to presence/absence of OTM Overhead Signal (OOS)
+ processing and TCM activation. For an IrDI interface,
+ there is no OOS processing and TCM activation is limited
+ to n levels as specified by a TCM level threshold.
+
+ This object contains two fields that are separated by
+ whitespace. The possible values are:
+ field 1: one of the 4-character ASCII strings
+ 'IrDI' or 'IaDI'
+ field 2: free-form text consisting of printable
+ UTF-8 encoded characters
+
+ Note that field 2 is optional. If it is not present then there
+ is no requirement for trailing whitespace after field 1.
+
+ The default values are as follows:
+ field 1: 'IaDI'
+ field 2: an empty string."
+
+ ::= { optIfOTMnEntry 4 }
+
+optIfOTMnTcmMax OBJECT-TYPE
+ SYNTAX Unsigned32 (0..6)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object identifies the maximum number of TCM
+ levels allowed for any Optical Channel contained
+ in this OTM. A new TCM activation will be rejected
+ if the requested level is greater than the threshold.
+ If InterfaceType object specifies a type of 'IaDI'
+ for this OTM, then this attribute is irrelevant.
+
+ Possible values: unsigned integers in the range
+ from 0 to 6 inclusive.
+ Default value: 3."
+
+ ::= { optIfOTMnEntry 5 }
+
+optIfOTMnOpticalReach OBJECT-TYPE
+ SYNTAX INTEGER { intraOffice(1), shortHaul(2), longHaul(3),
+ veryLongHaul(4), ultraLongHaul(5) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the length the optical signal
+ may travel before requiring termination or regeneration.
+ The meaning of the enumeration are:
+ intraOffice(1) - intra-office (as defined in ITU-T G.957)
+ shortHaul(2) - short haul (as defined in ITU-T G.957)
+ longHaul(3) - long haul (as defined in ITU-T G.957)
+ veryLongHaul(4) - very long haul (as defined in ITU-T G.691)
+ ultraLongHaul(5)- ultra long haul (as defined in ITU-T G.691)"
+ ::= { optIfOTMnEntry 6 }
+
+-- the optIfPerfMon group
+-- This group defines performance monitoring objects for all
+-- layers.
+
+-- PM interval table
+
+optIfPerfMonIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfPerfMonIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of 15-minute performance monitoring interval
+ information."
+ ::= { optIfPerfMon 1 }
+
+optIfPerfMonIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfPerfMonIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+ DESCRIPTION
+ "A conceptual row that contains 15-minute performance
+ monitoring interval information of an interface."
+ INDEX { ifIndex }
+ ::= { optIfPerfMonIntervalTable 1 }
+
+OptIfPerfMonIntervalEntry ::=
+ SEQUENCE {
+ optIfPerfMonCurrentTimeElapsed Gauge32,
+ optIfPerfMonCurDayTimeElapsed Gauge32,
+ optIfPerfMonIntervalNumIntervals Unsigned32,
+ optIfPerfMonIntervalNumInvalidIntervals Unsigned32
+ }
+
+optIfPerfMonCurrentTimeElapsed OBJECT-TYPE
+ SYNTAX Gauge32 (0..900)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of seconds elapsed in the current 15-minute
+ performance monitoring interval.
+ If, for some reason, such as an adjustment in the NE's
+ time-of-day clock, the number of seconds elapsed exceeds
+ the maximum value, then the maximum value will be returned."
+ ::= { optIfPerfMonIntervalEntry 1 }
+
+optIfPerfMonCurDayTimeElapsed OBJECT-TYPE
+ SYNTAX Gauge32 (0..86400)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of seconds elapsed in the current 24-hour interval
+ performance monitoring period.
+ If, for some reason, such as an adjustment in the NE's
+ time-of-day clock, the number of seconds elapsed exceeds
+ the maximum value, then the maximum value will be returned."
+ ::= { optIfPerfMonIntervalEntry 2 }
+
+optIfPerfMonIntervalNumIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of 15-minute intervals for which performance
+ monitoring data is available. The number is the same for all
+ the associated sub layers of the interface.
+ An optical interface must be capable of supporting at least
+ n intervals, where n is defined as follows:
+ The minimum value of n is 4.
+ The default of n is 32.
+ The maximum value of n is 96.
+
+ The value of this object will be n unless performance
+ monitoring was (re-)started for the interface within the last
+ (n*15) minutes, in which case the value will be the number of
+ complete 15-minute intervals since measurement was
+ (re-)started."
+ ::= { optIfPerfMonIntervalEntry 3 }
+
+optIfPerfMonIntervalNumInvalidIntervals OBJECT-TYPE
+ SYNTAX Unsigned32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of intervals in the range from 0 to
+ optIfPerfMonIntervalNumIntervals for which no performance
+ monitoring data is available and/or the data is invalid."
+ ::= { optIfPerfMonIntervalEntry 4 }
+
+-- the optIfOTSn group
+-- This group handles the configuration and performance
+-- monitoring objects for OTS layers.
+
+-- OTSn config table
+
+optIfOTSnConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OTSn configuration information."
+ ::= { optIfOTSn 1 }
+
+optIfOTSnConfigEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTSn configuration
+ information of an interface."
+ INDEX { ifIndex }
+ ::= { optIfOTSnConfigTable 1 }
+
+OptIfOTSnConfigEntry ::=
+ SEQUENCE {
+ optIfOTSnDirectionality OptIfDirectionality,
+ optIfOTSnAprStatus SnmpAdminString,
+ optIfOTSnAprControl SnmpAdminString,
+ optIfOTSnTraceIdentifierTransmitted OptIfTxTI,
+ optIfOTSnDAPIExpected OptIfExDAPI,
+ optIfOTSnSAPIExpected OptIfExSAPI,
+ optIfOTSnTraceIdentifierAccepted OptIfAcTI,
+ optIfOTSnTIMDetMode OptIfTIMDetMode,
+ optIfOTSnTIMActEnabled TruthValue,
+ optIfOTSnCurrentStatus BITS
+ }
+
+optIfOTSnDirectionality OBJECT-TYPE
+ SYNTAX OptIfDirectionality
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the entity."
+ ::= { optIfOTSnConfigEntry 1 }
+
+optIfOTSnAprStatus OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This attribute indicates the status of the Automatic
+ Power Reduction (APR) function of the entity. Valid
+ values are 'on' and 'off'."
+ ::= { optIfOTSnConfigEntry 2 }
+
+optIfOTSnAprControl OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is a UTF-8 encoded string that specifies Automatic
+ Power Reduction (APR) control actions requested of this entity
+ (when written) and that returns the current APR control state
+ of this entity (when read). The values are implementation-defined.
+ Any implementation that instantiates this object must document the
+ set of values that it allows to be written, the set of values
+ that it will return, and what each of those values means."
+ ::= { optIfOTSnConfigEntry 3 }
+
+optIfOTSnTraceIdentifierTransmitted OBJECT-TYPE
+ SYNTAX OptIfTxTI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The trace identifier transmitted.
+ This object is applicable when optIfOTSnDirectionality has the
+ value source(2) or bidirectional(3).
+ This object does not apply to reduced-capability systems (i.e.,
+ those for which optIfOTMnReduced has the value true(1)) or
+ at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+ has the value 'IrDI').
+ If no value is ever set by a management entity for the object
+ optIfOTSnTraceIdentifierTransmitted, system-specific default
+ value will be used. Any implementation that instantiates this
+ object must document the system-specific default value or how it
+ is derived."
+ ::= { optIfOTSnConfigEntry 4 }
+
+optIfOTSnDAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExDAPI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The DAPI expected by the receiver.
+ This object is applicable when optIfOTSnDirectionality has the
+ value sink(1) or bidirectional(3). It has no effect if
+ optIfOTSnTIMDetMode has the value off(1) or sapi(3).
+ This object does not apply to reduced-capability systems (i.e.,
+ those for which optIfOTMnReduced has the value true(1)) or
+ at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+ has the value 'IrDI')."
+ ::= { optIfOTSnConfigEntry 5 }
+
+optIfOTSnSAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExSAPI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SAPI expected by the receiver.
+ This object is applicable when optIfOTSnDirectionality has the
+ value sink(1) or bidirectional(3). It has no effect if
+ optIfOTSnTIMDetMode has the value off(1) or dapi(2).
+ This object does not apply to reduced-capability systems (i.e.,
+ those for which optIfOTMnReduced has the value true(1)) or
+ at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+ has the value 'IrDI')."
+ ::= { optIfOTSnConfigEntry 6 }
+
+optIfOTSnTraceIdentifierAccepted OBJECT-TYPE
+ SYNTAX OptIfAcTI
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual trace identifier received.
+ This object is applicable when optIfOTSnDirectionality has the
+ value sink(1) or bidirectional(3). Its value is unspecified
+ if optIfOTSnCurrentStatus has either or both of the
+ losO(5) and los(6) bits set.
+ This object does not apply to reduced-capability systems (i.e.,
+ those for which optIfOTMnReduced has the value true(1)) or
+ at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+ has the value 'IrDI')."
+ ::= { optIfOTSnConfigEntry 7 }
+
+optIfOTSnTIMDetMode OBJECT-TYPE
+ SYNTAX OptIfTIMDetMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of the Trace Identifier Mismatch (TIM)
+ Detection function. This object is applicable
+ when optIfOTSnDirectionality has the value sink(1)
+ or bidirectional(3). The default value is off(1).
+ This object does not apply to reduced-capability systems (i.e.,
+ those for which optIfOTMnReduced has the value true(1)) or
+ at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+ has the value 'IrDI').
+ The default value of this object is off(1)."
+ ::= { optIfOTSnConfigEntry 8 }
+
+optIfOTSnTIMActEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the Trace Identifier Mismatch (TIM)
+ Consequent Action function is enabled. This object
+ is applicable when optIfOTSnDirectionality has the
+ value sink(1) or bidirectional(3). It has no effect
+ when the value of optIfOTSnTIMDetMode is off(1).
+ This object does not apply to reduced-capability systems (i.e.,
+ those for which optIfOTMnReduced has the value true(1)) or
+ at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
+ has the value 'IrDI').
+ The default value of this object is false(2)."
+ ::= { optIfOTSnConfigEntry 9 }
+
+optIfOTSnCurrentStatus OBJECT-TYPE
+ SYNTAX BITS {
+ bdiP(0),
+ bdiO(1),
+ bdi(2),
+ tim(3),
+ losP(4),
+ losO(5),
+ los(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the defect condition of the entity, if any.
+ This object is applicable when optIfOTSnDirectionality
+ has the value sink(1) or bidirectional(3). In
+ reduced-capability systems or at IrDI interfaces
+ the only bit position that may be set is los(6)."
+ ::= { optIfOTSnConfigEntry 10 }
+
+-- OTSn sink current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOTSnSinkCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnSinkCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OTSn sink performance monitoring information for
+ the current 15-minute interval."
+ ::= { optIfOTSn 2 }
+
+optIfOTSnSinkCurrentEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnSinkCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTSn sink performance
+ monitoring information of an interface for the current
+ 15-minute interval."
+ INDEX { ifIndex }
+ ::= { optIfOTSnSinkCurrentTable 1 }
+
+OptIfOTSnSinkCurrentEntry ::=
+ SEQUENCE {
+ optIfOTSnSinkCurrentSuspectedFlag TruthValue,
+ optIfOTSnSinkCurrentInputPower Integer32,
+ optIfOTSnSinkCurrentLowInputPower Integer32,
+ optIfOTSnSinkCurrentHighInputPower Integer32,
+ optIfOTSnSinkCurrentLowerInputPowerThreshold Integer32,
+ optIfOTSnSinkCurrentUpperInputPowerThreshold Integer32,
+ optIfOTSnSinkCurrentOutputPower Integer32,
+ optIfOTSnSinkCurrentLowOutputPower Integer32,
+ optIfOTSnSinkCurrentHighOutputPower Integer32,
+ optIfOTSnSinkCurrentLowerOutputPowerThreshold Integer32,
+ optIfOTSnSinkCurrentUpperOutputPowerThreshold Integer32
+ }
+
+optIfOTSnSinkCurrentSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOTSnSinkCurrentEntry 1 }
+
+optIfOTSnSinkCurrentInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the input."
+ ::= { optIfOTSnSinkCurrentEntry 2 }
+
+optIfOTSnSinkCurrentLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ current 15-minute interval."
+ ::= { optIfOTSnSinkCurrentEntry 3 }
+
+optIfOTSnSinkCurrentHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ current 15-minute interval."
+ ::= { optIfOTSnSinkCurrentEntry 4 }
+
+optIfOTSnSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on input power. If
+ optIfOTSnSinkCurrentInputPower drops to this value or below,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOTSnSinkCurrentEntry 5 }
+
+optIfOTSnSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on input power. If
+ optIfOTSnSinkCurrentInputPower reaches or exceeds this value,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOTSnSinkCurrentEntry 6 }
+
+optIfOTSnSinkCurrentOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the output."
+ ::= { optIfOTSnSinkCurrentEntry 7 }
+
+optIfOTSnSinkCurrentLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOTSnSinkCurrentEntry 8 }
+
+optIfOTSnSinkCurrentHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOTSnSinkCurrentEntry 9 }
+
+optIfOTSnSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on output power. If
+ optIfOTSnSinkCurrentOutputPower drops to this value or below,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOTSnSinkCurrentEntry 10 }
+
+optIfOTSnSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on output power. If
+ optIfOTSnSinkCurrentOutputPower reaches or exceeds this value,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOTSnSinkCurrentEntry 11 }
+
+-- OTSn sink interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOTSnSinkIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnSinkIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of historical OTSn sink performance monitoring
+ information."
+ ::= { optIfOTSn 3 }
+
+optIfOTSnSinkIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnSinkIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTSn sink performance
+ monitoring information of an interface during a particular
+ historical interval."
+ INDEX { ifIndex, optIfOTSnSinkIntervalNumber }
+ ::= { optIfOTSnSinkIntervalTable 1 }
+
+OptIfOTSnSinkIntervalEntry ::=
+ SEQUENCE {
+ optIfOTSnSinkIntervalNumber OptIfIntervalNumber,
+ optIfOTSnSinkIntervalSuspectedFlag TruthValue,
+ optIfOTSnSinkIntervalLastInputPower Integer32,
+ optIfOTSnSinkIntervalLowInputPower Integer32,
+ optIfOTSnSinkIntervalHighInputPower Integer32,
+ optIfOTSnSinkIntervalLastOutputPower Integer32,
+ optIfOTSnSinkIntervalLowOutputPower Integer32,
+ optIfOTSnSinkIntervalHighOutputPower Integer32
+
+ }
+
+optIfOTSnSinkIntervalNumber OBJECT-TYPE
+ SYNTAX OptIfIntervalNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the interval."
+ ::= { optIfOTSnSinkIntervalEntry 1 }
+
+optIfOTSnSinkIntervalSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOTSnSinkIntervalEntry 2 }
+
+optIfOTSnSinkIntervalLastInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the input during the
+ interval."
+ ::= { optIfOTSnSinkIntervalEntry 3 }
+
+optIfOTSnSinkIntervalLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ interval."
+ ::= { optIfOTSnSinkIntervalEntry 4 }
+
+
+optIfOTSnSinkIntervalHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ interval."
+ ::= { optIfOTSnSinkIntervalEntry 5 }
+
+optIfOTSnSinkIntervalLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ interval."
+ ::= { optIfOTSnSinkIntervalEntry 6 }
+
+optIfOTSnSinkIntervalLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ interval."
+ ::= { optIfOTSnSinkIntervalEntry 7 }
+
+optIfOTSnSinkIntervalHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ interval."
+ ::= { optIfOTSnSinkIntervalEntry 8 }
+
+-- OTSn sink current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOTSnSinkCurDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnSinkCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+
+ DESCRIPTION
+ "A table of OTSn sink performance monitoring information for
+ the current 24-hour interval."
+ ::= { optIfOTSn 4 }
+
+optIfOTSnSinkCurDayEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnSinkCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTSn sink performance
+ monitoring information of an interface for the current
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOTSnSinkCurDayTable 1 }
+
+OptIfOTSnSinkCurDayEntry ::=
+ SEQUENCE {
+ optIfOTSnSinkCurDaySuspectedFlag TruthValue,
+ optIfOTSnSinkCurDayLowInputPower Integer32,
+ optIfOTSnSinkCurDayHighInputPower Integer32,
+ optIfOTSnSinkCurDayLowOutputPower Integer32,
+ optIfOTSnSinkCurDayHighOutputPower Integer32
+ }
+
+optIfOTSnSinkCurDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOTSnSinkCurDayEntry 1 }
+
+optIfOTSnSinkCurDayLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ current 24-hour interval."
+ ::= { optIfOTSnSinkCurDayEntry 2 }
+
+optIfOTSnSinkCurDayHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ current 24-hour interval."
+ ::= { optIfOTSnSinkCurDayEntry 3 }
+
+optIfOTSnSinkCurDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOTSnSinkCurDayEntry 4 }
+
+optIfOTSnSinkCurDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOTSnSinkCurDayEntry 5 }
+
+-- OTSn sink previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOTSnSinkPrevDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnSinkPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OTSn sink performance monitoring information for
+ the previous 24-hour interval."
+ ::= { optIfOTSn 5 }
+
+optIfOTSnSinkPrevDayEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnSinkPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTSn sink performance
+ monitoring information of an interface for the previous
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOTSnSinkPrevDayTable 1 }
+
+
+OptIfOTSnSinkPrevDayEntry ::=
+ SEQUENCE {
+ optIfOTSnSinkPrevDaySuspectedFlag TruthValue,
+ optIfOTSnSinkPrevDayLastInputPower Integer32,
+ optIfOTSnSinkPrevDayLowInputPower Integer32,
+ optIfOTSnSinkPrevDayHighInputPower Integer32,
+ optIfOTSnSinkPrevDayLastOutputPower Integer32,
+ optIfOTSnSinkPrevDayLowOutputPower Integer32,
+ optIfOTSnSinkPrevDayHighOutputPower Integer32
+ }
+
+optIfOTSnSinkPrevDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOTSnSinkPrevDayEntry 1 }
+
+optIfOTSnSinkPrevDayLastInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSinkPrevDayEntry 2 }
+
+optIfOTSnSinkPrevDayLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSinkPrevDayEntry 3 }
+
+optIfOTSnSinkPrevDayHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSinkPrevDayEntry 4 }
+
+
+optIfOTSnSinkPrevDayLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSinkPrevDayEntry 5 }
+
+optIfOTSnSinkPrevDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSinkPrevDayEntry 6 }
+
+optIfOTSnSinkPrevDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSinkPrevDayEntry 7 }
+
+-- OTSn source current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOTSnSrcCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnSrcCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OTSn source performance monitoring information for
+ the current 15-minute interval."
+ ::= { optIfOTSn 6 }
+
+optIfOTSnSrcCurrentEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnSrcCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+
+
+ "A conceptual row that contains OTSn source performance
+ monitoring information of an interface for the current
+ 15-minute interval."
+ INDEX { ifIndex }
+ ::= { optIfOTSnSrcCurrentTable 1 }
+
+OptIfOTSnSrcCurrentEntry ::=
+ SEQUENCE {
+ optIfOTSnSrcCurrentSuspectedFlag TruthValue,
+ optIfOTSnSrcCurrentOutputPower Integer32,
+ optIfOTSnSrcCurrentLowOutputPower Integer32,
+ optIfOTSnSrcCurrentHighOutputPower Integer32,
+ optIfOTSnSrcCurrentLowerOutputPowerThreshold Integer32,
+ optIfOTSnSrcCurrentUpperOutputPowerThreshold Integer32,
+ optIfOTSnSrcCurrentInputPower Integer32,
+ optIfOTSnSrcCurrentLowInputPower Integer32,
+ optIfOTSnSrcCurrentHighInputPower Integer32,
+ optIfOTSnSrcCurrentLowerInputPowerThreshold Integer32,
+ optIfOTSnSrcCurrentUpperInputPowerThreshold Integer32
+ }
+
+optIfOTSnSrcCurrentSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOTSnSrcCurrentEntry 1 }
+
+optIfOTSnSrcCurrentOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the output."
+ ::= { optIfOTSnSrcCurrentEntry 2 }
+
+optIfOTSnSrcCurrentLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOTSnSrcCurrentEntry 3 }
+
+
+optIfOTSnSrcCurrentHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOTSnSrcCurrentEntry 4 }
+
+optIfOTSnSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on output power. If
+ optIfOTSnSrcCurrentOutputPower drops to this value or below,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOTSnSrcCurrentEntry 5 }
+
+optIfOTSnSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on output power. If
+ optIfOTSnSrcCurrentOutputPower reaches or exceeds this value,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOTSnSrcCurrentEntry 6 }
+
+optIfOTSnSrcCurrentInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the input."
+ ::= { optIfOTSnSrcCurrentEntry 7 }
+
+optIfOTSnSrcCurrentLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+
+ DESCRIPTION
+
+
+ "The lowest optical power monitored at the input during the
+ current 15-minute interval."
+ ::= { optIfOTSnSrcCurrentEntry 8 }
+
+optIfOTSnSrcCurrentHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ current 15-minute interval."
+ ::= { optIfOTSnSrcCurrentEntry 9 }
+
+optIfOTSnSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on input power. If
+ optIfOTSnSrcCurrentInputPower drops to this value or below,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOTSnSrcCurrentEntry 10 }
+
+optIfOTSnSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on input power. If
+ optIfOTSnSrcCurrentInputPower reaches or exceeds this value,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOTSnSrcCurrentEntry 11 }
+
+-- OTSn source interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOTSnSrcIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnSrcIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of historical OTSn source performance monitoring
+ information."
+ ::= { optIfOTSn 7 }
+
+
+optIfOTSnSrcIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnSrcIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTSn source performance
+ monitoring information of an interface during a particular
+ historical interval."
+ INDEX { ifIndex, optIfOTSnSrcIntervalNumber }
+ ::= { optIfOTSnSrcIntervalTable 1 }
+
+OptIfOTSnSrcIntervalEntry ::=
+ SEQUENCE {
+ optIfOTSnSrcIntervalNumber OptIfIntervalNumber,
+ optIfOTSnSrcIntervalSuspectedFlag TruthValue,
+ optIfOTSnSrcIntervalLastOutputPower Integer32,
+ optIfOTSnSrcIntervalLowOutputPower Integer32,
+ optIfOTSnSrcIntervalHighOutputPower Integer32,
+ optIfOTSnSrcIntervalLastInputPower Integer32,
+ optIfOTSnSrcIntervalLowInputPower Integer32,
+ optIfOTSnSrcIntervalHighInputPower Integer32
+ }
+
+optIfOTSnSrcIntervalNumber OBJECT-TYPE
+ SYNTAX OptIfIntervalNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the interval."
+ ::= { optIfOTSnSrcIntervalEntry 1 }
+
+optIfOTSnSrcIntervalSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOTSnSrcIntervalEntry 2 }
+
+optIfOTSnSrcIntervalLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ interval."
+ ::= { optIfOTSnSrcIntervalEntry 3 }
+
+
+optIfOTSnSrcIntervalLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ interval."
+ ::= { optIfOTSnSrcIntervalEntry 4 }
+
+optIfOTSnSrcIntervalHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ interval."
+ ::= { optIfOTSnSrcIntervalEntry 5 }
+
+optIfOTSnSrcIntervalLastInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the input during the
+ interval."
+ ::= { optIfOTSnSrcIntervalEntry 6 }
+
+optIfOTSnSrcIntervalLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ interval."
+ ::= { optIfOTSnSrcIntervalEntry 7 }
+
+optIfOTSnSrcIntervalHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ interval."
+
+
+ ::= { optIfOTSnSrcIntervalEntry 8 }
+
+
+-- OTSn source current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOTSnSrcCurDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnSrcCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OTSn source performance monitoring information for
+ the current 24-hour interval."
+ ::= { optIfOTSn 8 }
+
+optIfOTSnSrcCurDayEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnSrcCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTSn source performance
+ monitoring information of an interface for the current
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOTSnSrcCurDayTable 1 }
+
+OptIfOTSnSrcCurDayEntry ::=
+ SEQUENCE {
+ optIfOTSnSrcCurDaySuspectedFlag TruthValue,
+ optIfOTSnSrcCurDayLowOutputPower Integer32,
+ optIfOTSnSrcCurDayHighOutputPower Integer32,
+ optIfOTSnSrcCurDayLowInputPower Integer32,
+ optIfOTSnSrcCurDayHighInputPower Integer32
+ }
+
+optIfOTSnSrcCurDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOTSnSrcCurDayEntry 1 }
+
+optIfOTSnSrcCurDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOTSnSrcCurDayEntry 2 }
+
+optIfOTSnSrcCurDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOTSnSrcCurDayEntry 3 }
+
+optIfOTSnSrcCurDayLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ current 24-hour interval."
+ ::= { optIfOTSnSrcCurDayEntry 4 }
+
+optIfOTSnSrcCurDayHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ current 24-hour interval."
+ ::= { optIfOTSnSrcCurDayEntry 5 }
+
+-- OTSn source previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOTSnSrcPrevDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTSnSrcPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OTSn source performance monitoring information for
+ the previous 24-hour interval."
+ ::= { optIfOTSn 9 }
+
+
+optIfOTSnSrcPrevDayEntry OBJECT-TYPE
+ SYNTAX OptIfOTSnSrcPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTSn source performance
+ monitoring information of an interface for the previous
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOTSnSrcPrevDayTable 1 }
+
+OptIfOTSnSrcPrevDayEntry ::=
+ SEQUENCE {
+ optIfOTSnSrcPrevDaySuspectedFlag TruthValue,
+ optIfOTSnSrcPrevDayLastOutputPower Integer32,
+ optIfOTSnSrcPrevDayLowOutputPower Integer32,
+ optIfOTSnSrcPrevDayHighOutputPower Integer32,
+ optIfOTSnSrcPrevDayLastInputPower Integer32,
+ optIfOTSnSrcPrevDayLowInputPower Integer32,
+ optIfOTSnSrcPrevDayHighInputPower Integer32
+ }
+
+optIfOTSnSrcPrevDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOTSnSrcPrevDayEntry 1 }
+
+optIfOTSnSrcPrevDayLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSrcPrevDayEntry 2 }
+
+optIfOTSnSrcPrevDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ previous 24-hour interval."
+
+
+ ::= { optIfOTSnSrcPrevDayEntry 3 }
+
+optIfOTSnSrcPrevDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSrcPrevDayEntry 4 }
+
+optIfOTSnSrcPrevDayLastInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSrcPrevDayEntry 5 }
+
+optIfOTSnSrcPrevDayLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSrcPrevDayEntry 6 }
+
+optIfOTSnSrcPrevDayHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOTSnSrcPrevDayEntry 7 }
+
+
+-- the optIfOMSn group
+-- This group handles the configuration and performance monitoring
+-- information for OMS layers.
+
+-- OMSn config table
+
+optIfOMSnConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OMSn configuration information."
+ ::= { optIfOMSn 1 }
+
+optIfOMSnConfigEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn configuration
+ information of an interface."
+ INDEX { ifIndex }
+ ::= { optIfOMSnConfigTable 1 }
+
+OptIfOMSnConfigEntry ::=
+ SEQUENCE {
+ optIfOMSnDirectionality OptIfDirectionality,
+ optIfOMSnCurrentStatus BITS
+ }
+
+optIfOMSnDirectionality OBJECT-TYPE
+ SYNTAX OptIfDirectionality
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the entity."
+ ::= { optIfOMSnConfigEntry 1 }
+
+optIfOMSnCurrentStatus OBJECT-TYPE
+ SYNTAX BITS {
+ ssfP(0),
+ ssfO(1),
+ ssf(2),
+ bdiP(3),
+ bdiO(4),
+ bdi(5),
+ losP(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the defect condition of the entity, if any.
+ This object is applicable only to full capability
+ systems whose interface type is IaDI and for which
+
+
+ optIfOMSnDirectionality has the value sink(1) or
+ bidirectional(3)."
+ ::= { optIfOMSnConfigEntry 2 }
+
+-- OMSn sink current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOMSnSinkCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnSinkCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OMSn sink performance monitoring information for
+ the current 15-minute interval."
+ ::= { optIfOMSn 2 }
+
+optIfOMSnSinkCurrentEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnSinkCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn sink performance
+ monitoring information of an interface for the current
+ 15-minute interval."
+ INDEX { ifIndex }
+ ::= { optIfOMSnSinkCurrentTable 1 }
+
+OptIfOMSnSinkCurrentEntry ::=
+ SEQUENCE {
+ optIfOMSnSinkCurrentSuspectedFlag TruthValue,
+ optIfOMSnSinkCurrentAggregatedInputPower Integer32,
+ optIfOMSnSinkCurrentLowAggregatedInputPower Integer32,
+ optIfOMSnSinkCurrentHighAggregatedInputPower Integer32,
+ optIfOMSnSinkCurrentLowerInputPowerThreshold Integer32,
+ optIfOMSnSinkCurrentUpperInputPowerThreshold Integer32,
+ optIfOMSnSinkCurrentOutputPower Integer32,
+ optIfOMSnSinkCurrentLowOutputPower Integer32,
+ optIfOMSnSinkCurrentHighOutputPower Integer32,
+ optIfOMSnSinkCurrentLowerOutputPowerThreshold Integer32,
+ optIfOMSnSinkCurrentUpperOutputPowerThreshold Integer32
+ }
+
+optIfOMSnSinkCurrentSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+
+
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOMSnSinkCurrentEntry 1 }
+
+optIfOMSnSinkCurrentAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The aggregated optical power of all the DWDM input
+ channels."
+ ::= { optIfOMSnSinkCurrentEntry 2 }
+
+optIfOMSnSinkCurrentLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power of all the DWDM input
+ channels during the current 15-minute interval."
+ ::= { optIfOMSnSinkCurrentEntry 3 }
+
+optIfOMSnSinkCurrentHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power of all the DWDM input
+ channels during the current 15-minute interval."
+ ::= { optIfOMSnSinkCurrentEntry 4 }
+
+optIfOMSnSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on aggregated input power. If
+ optIfOMSnSinkCurrentAggregatedInputPower drops to this value
+ or below, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOMSnSinkCurrentEntry 5 }
+
+optIfOMSnSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+
+
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on aggregated input power. If
+ optIfOMSnSinkCurrentAggregatedInputPower reaches or exceeds
+ this value, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOMSnSinkCurrentEntry 6 }
+
+optIfOMSnSinkCurrentOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the output."
+ ::= { optIfOMSnSinkCurrentEntry 7 }
+
+optIfOMSnSinkCurrentLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output
+ during the current 15-minute interval."
+ ::= { optIfOMSnSinkCurrentEntry 8 }
+
+optIfOMSnSinkCurrentHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output
+ during the current 15-minute interval."
+ ::= { optIfOMSnSinkCurrentEntry 9 }
+
+optIfOMSnSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on output power. If
+ optIfOMSnSinkCurrentOutputPower drops to this value
+ or below, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOMSnSinkCurrentEntry 10 }
+
+optIfOMSnSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on output power. If
+ optIfOMSnSinkCurrentOutputPower reaches or exceeds
+ this value, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOMSnSinkCurrentEntry 11 }
+
+-- OMSn sink interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOMSnSinkIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnSinkIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of historical OMSn sink performance monitoring
+ information."
+ ::= { optIfOMSn 3 }
+
+optIfOMSnSinkIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnSinkIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn sink performance
+ monitoring information of an interface during a particular
+ historical interval."
+ INDEX { ifIndex, optIfOMSnSinkIntervalNumber }
+ ::= { optIfOMSnSinkIntervalTable 1 }
+
+OptIfOMSnSinkIntervalEntry ::=
+ SEQUENCE {
+ optIfOMSnSinkIntervalNumber OptIfIntervalNumber,
+ optIfOMSnSinkIntervalSuspectedFlag TruthValue,
+ optIfOMSnSinkIntervalLastAggregatedInputPower Integer32,
+ optIfOMSnSinkIntervalLowAggregatedInputPower Integer32,
+ optIfOMSnSinkIntervalHighAggregatedInputPower Integer32,
+ optIfOMSnSinkIntervalLastOutputPower Integer32,
+ optIfOMSnSinkIntervalLowOutputPower Integer32,
+ optIfOMSnSinkIntervalHighOutputPower Integer32
+ }
+
+optIfOMSnSinkIntervalNumber OBJECT-TYPE
+ SYNTAX OptIfIntervalNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the interval."
+ ::= { optIfOMSnSinkIntervalEntry 1 }
+
+optIfOMSnSinkIntervalSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOMSnSinkIntervalEntry 2 }
+
+optIfOMSnSinkIntervalLastAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last aggregated optical power of all the DWDM input
+ channels during the interval."
+ ::= { optIfOMSnSinkIntervalEntry 3 }
+
+optIfOMSnSinkIntervalLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power of all the DWDM input
+ channels during the interval."
+ ::= { optIfOMSnSinkIntervalEntry 4 }
+
+optIfOMSnSinkIntervalHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power of all the DWDM input
+ channels during the interval."
+ ::= { optIfOMSnSinkIntervalEntry 5 }
+
+optIfOMSnSinkIntervalLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power at the output
+ during the interval."
+ ::= { optIfOMSnSinkIntervalEntry 6 }
+
+optIfOMSnSinkIntervalLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power at the output
+ during the interval."
+ ::= { optIfOMSnSinkIntervalEntry 7 }
+
+optIfOMSnSinkIntervalHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power at the output
+ during the interval."
+ ::= { optIfOMSnSinkIntervalEntry 8 }
+
+-- OMSn sink current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOMSnSinkCurDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnSinkCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OMSn sink performance monitoring information for
+ the current 24-hour interval."
+ ::= { optIfOMSn 4 }
+
+optIfOMSnSinkCurDayEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnSinkCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn sink performance
+ monitoring information of an interface for the current
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOMSnSinkCurDayTable 1 }
+
+OptIfOMSnSinkCurDayEntry ::=
+ SEQUENCE {
+ optIfOMSnSinkCurDaySuspectedFlag TruthValue,
+ optIfOMSnSinkCurDayLowAggregatedInputPower Integer32,
+ optIfOMSnSinkCurDayHighAggregatedInputPower Integer32,
+ optIfOMSnSinkCurDayLowOutputPower Integer32,
+ optIfOMSnSinkCurDayHighOutputPower Integer32
+ }
+
+optIfOMSnSinkCurDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOMSnSinkCurDayEntry 1 }
+
+optIfOMSnSinkCurDayLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power of all the DWDM input
+ channels during the current 24-hour interval."
+ ::= { optIfOMSnSinkCurDayEntry 2 }
+
+optIfOMSnSinkCurDayHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power of all the DWDM input
+ channels during the current 24-hour interval."
+ ::= { optIfOMSnSinkCurDayEntry 3 }
+
+optIfOMSnSinkCurDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power at the output
+ during the current 24-hour interval."
+ ::= { optIfOMSnSinkCurDayEntry 4 }
+
+optIfOMSnSinkCurDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power at the output
+ during the current 24-hour interval."
+ ::= { optIfOMSnSinkCurDayEntry 5 }
+
+-- OMSn sink previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOMSnSinkPrevDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnSinkPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OMSn sink performance monitoring information for
+ the previous 24-hour interval."
+ ::= { optIfOMSn 5 }
+
+optIfOMSnSinkPrevDayEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnSinkPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn sink performance
+ monitoring information of an interface for the previous
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOMSnSinkPrevDayTable 1 }
+
+OptIfOMSnSinkPrevDayEntry ::=
+ SEQUENCE {
+ optIfOMSnSinkPrevDaySuspectedFlag TruthValue,
+ optIfOMSnSinkPrevDayLastAggregatedInputPower Integer32,
+ optIfOMSnSinkPrevDayLowAggregatedInputPower Integer32,
+ optIfOMSnSinkPrevDayHighAggregatedInputPower Integer32,
+ optIfOMSnSinkPrevDayLastOutputPower Integer32,
+ optIfOMSnSinkPrevDayLowOutputPower Integer32,
+ optIfOMSnSinkPrevDayHighOutputPower Integer32
+ }
+
+optIfOMSnSinkPrevDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOMSnSinkPrevDayEntry 1 }
+
+optIfOMSnSinkPrevDayLastAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last aggregated optical power of all the DWDM input
+ channels during the previous 24-hour interval."
+ ::= { optIfOMSnSinkPrevDayEntry 2 }
+
+optIfOMSnSinkPrevDayLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power of all the DWDM input
+ channels during the previous 24-hour interval."
+ ::= { optIfOMSnSinkPrevDayEntry 3 }
+
+optIfOMSnSinkPrevDayHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power of all the DWDM input
+ channels during the previous 24-hour interval."
+ ::= { optIfOMSnSinkPrevDayEntry 4 }
+
+optIfOMSnSinkPrevDayLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power at the output
+ during the previous 24-hour interval."
+ ::= { optIfOMSnSinkPrevDayEntry 5 }
+
+optIfOMSnSinkPrevDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power at the output
+ during the previous 24-hour interval."
+ ::= { optIfOMSnSinkPrevDayEntry 6 }
+
+optIfOMSnSinkPrevDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power at the output
+ during the previous 24-hour interval."
+ ::= { optIfOMSnSinkPrevDayEntry 7 }
+
+-- OMSn source current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOMSnSrcCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnSrcCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OMSn source performance monitoring information for
+ the current 15-minute interval."
+ ::= { optIfOMSn 6 }
+
+optIfOMSnSrcCurrentEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnSrcCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn source performance
+ monitoring information of an interface for the current
+ 15-minute interval."
+ INDEX { ifIndex }
+ ::= { optIfOMSnSrcCurrentTable 1 }
+
+OptIfOMSnSrcCurrentEntry ::=
+ SEQUENCE {
+ optIfOMSnSrcCurrentSuspectedFlag TruthValue,
+ optIfOMSnSrcCurrentOutputPower Integer32,
+ optIfOMSnSrcCurrentLowOutputPower Integer32,
+ optIfOMSnSrcCurrentHighOutputPower Integer32,
+ optIfOMSnSrcCurrentLowerOutputPowerThreshold Integer32,
+ optIfOMSnSrcCurrentUpperOutputPowerThreshold Integer32,
+ optIfOMSnSrcCurrentAggregatedInputPower Integer32,
+ optIfOMSnSrcCurrentLowAggregatedInputPower Integer32,
+ optIfOMSnSrcCurrentHighAggregatedInputPower Integer32,
+ optIfOMSnSrcCurrentLowerInputPowerThreshold Integer32,
+ optIfOMSnSrcCurrentUpperInputPowerThreshold Integer32
+ }
+
+optIfOMSnSrcCurrentSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOMSnSrcCurrentEntry 1 }
+
+optIfOMSnSrcCurrentOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the output."
+ ::= { optIfOMSnSrcCurrentEntry 2 }
+
+optIfOMSnSrcCurrentLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOMSnSrcCurrentEntry 3 }
+
+optIfOMSnSrcCurrentHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOMSnSrcCurrentEntry 4 }
+
+optIfOMSnSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on output power. If
+ optIfOMSnSrcCurrentOutputPower drops to this value or below,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOMSnSrcCurrentEntry 5 }
+
+optIfOMSnSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on output power. If
+ optIfOMSnSrcCurrentOutputPower reaches or exceeds this value,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOMSnSrcCurrentEntry 6 }
+
+optIfOMSnSrcCurrentAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The aggregated optical power at the input."
+ ::= { optIfOMSnSrcCurrentEntry 7 }
+
+optIfOMSnSrcCurrentLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power at the input
+ during the current 15-minute interval."
+ ::= { optIfOMSnSrcCurrentEntry 8 }
+
+optIfOMSnSrcCurrentHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power at the input
+ during the current 15-minute interval."
+ ::= { optIfOMSnSrcCurrentEntry 9 }
+
+
+optIfOMSnSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on aggregated input power. If
+ optIfOMSnSrcCurrentAggregatedInputPower drops to this value
+ or below, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOMSnSrcCurrentEntry 10 }
+
+optIfOMSnSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on aggregated input power. If
+ optIfOMSnSrcCurrentAggregatedInputPower reaches or exceeds
+ this value, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOMSnSrcCurrentEntry 11 }
+
+
+-- OMSn source interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOMSnSrcIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnSrcIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of historical OMSn source performance monitoring
+ information."
+ ::= { optIfOMSn 7 }
+
+optIfOMSnSrcIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnSrcIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn source performance
+ monitoring information of an interface during a particular
+ historical interval."
+ INDEX { ifIndex, optIfOMSnSrcIntervalNumber }
+ ::= { optIfOMSnSrcIntervalTable 1 }
+
+OptIfOMSnSrcIntervalEntry ::=
+ SEQUENCE {
+ optIfOMSnSrcIntervalNumber OptIfIntervalNumber,
+ optIfOMSnSrcIntervalSuspectedFlag TruthValue,
+ optIfOMSnSrcIntervalLastOutputPower Integer32,
+ optIfOMSnSrcIntervalLowOutputPower Integer32,
+ optIfOMSnSrcIntervalHighOutputPower Integer32,
+ optIfOMSnSrcIntervalLastAggregatedInputPower Integer32,
+ optIfOMSnSrcIntervalLowAggregatedInputPower Integer32,
+ optIfOMSnSrcIntervalHighAggregatedInputPower Integer32
+ }
+
+optIfOMSnSrcIntervalNumber OBJECT-TYPE
+ SYNTAX OptIfIntervalNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the interval."
+ ::= { optIfOMSnSrcIntervalEntry 1 }
+
+optIfOMSnSrcIntervalSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOMSnSrcIntervalEntry 2 }
+
+optIfOMSnSrcIntervalLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ interval."
+ ::= { optIfOMSnSrcIntervalEntry 3 }
+
+optIfOMSnSrcIntervalLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ interval."
+ ::= { optIfOMSnSrcIntervalEntry 4 }
+
+optIfOMSnSrcIntervalHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ interval."
+ ::= { optIfOMSnSrcIntervalEntry 5 }
+
+optIfOMSnSrcIntervalLastAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last aggregated optical power at the input
+ during the interval."
+ ::= { optIfOMSnSrcIntervalEntry 6 }
+
+optIfOMSnSrcIntervalLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power at the input
+ during the interval."
+ ::= { optIfOMSnSrcIntervalEntry 7 }
+
+optIfOMSnSrcIntervalHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power at the input
+ during the interval."
+ ::= { optIfOMSnSrcIntervalEntry 8 }
+
+-- OMSn source current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOMSnSrcCurDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnSrcCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OMSn source performance monitoring information for
+ the current 24-hour interval."
+ ::= { optIfOMSn 8 }
+
+optIfOMSnSrcCurDayEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnSrcCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn source performance
+ monitoring information of an interface for the current
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOMSnSrcCurDayTable 1 }
+
+OptIfOMSnSrcCurDayEntry ::=
+ SEQUENCE {
+ optIfOMSnSrcCurDaySuspectedFlag TruthValue,
+ optIfOMSnSrcCurDayLowOutputPower Integer32,
+ optIfOMSnSrcCurDayHighOutputPower Integer32,
+ optIfOMSnSrcCurDayLowAggregatedInputPower Integer32,
+ optIfOMSnSrcCurDayHighAggregatedInputPower Integer32
+ }
+
+optIfOMSnSrcCurDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOMSnSrcCurDayEntry 1 }
+
+optIfOMSnSrcCurDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOMSnSrcCurDayEntry 2 }
+
+optIfOMSnSrcCurDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOMSnSrcCurDayEntry 3 }
+
+optIfOMSnSrcCurDayLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power at the input
+ during the current 24-hour interval."
+ ::= { optIfOMSnSrcCurDayEntry 4 }
+
+optIfOMSnSrcCurDayHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power at the input
+ during the current 24-hour interval."
+ ::= { optIfOMSnSrcCurDayEntry 5 }
+
+-- OMSn source previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOMSnSrcPrevDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOMSnSrcPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OMSn source performance monitoring information for
+ the previous 24-hour interval."
+ ::= { optIfOMSn 9 }
+
+optIfOMSnSrcPrevDayEntry OBJECT-TYPE
+ SYNTAX OptIfOMSnSrcPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OMSn source performance
+ monitoring information of an interface for the previous
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOMSnSrcPrevDayTable 1 }
+
+
+OptIfOMSnSrcPrevDayEntry ::=
+ SEQUENCE {
+ optIfOMSnSrcPrevDaySuspectedFlag TruthValue,
+ optIfOMSnSrcPrevDayLastOutputPower Integer32,
+ optIfOMSnSrcPrevDayLowOutputPower Integer32,
+ optIfOMSnSrcPrevDayHighOutputPower Integer32,
+ optIfOMSnSrcPrevDayLastAggregatedInputPower Integer32,
+ optIfOMSnSrcPrevDayLowAggregatedInputPower Integer32,
+ optIfOMSnSrcPrevDayHighAggregatedInputPower Integer32
+ }
+
+optIfOMSnSrcPrevDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOMSnSrcPrevDayEntry 1 }
+
+optIfOMSnSrcPrevDayLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOMSnSrcPrevDayEntry 2 }
+
+optIfOMSnSrcPrevDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOMSnSrcPrevDayEntry 3 }
+
+optIfOMSnSrcPrevDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOMSnSrcPrevDayEntry 4 }
+
+optIfOMSnSrcPrevDayLastAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last aggregated optical power at the input during the
+ previous 24-hour interval."
+ ::= { optIfOMSnSrcPrevDayEntry 5 }
+
+optIfOMSnSrcPrevDayLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power at the input during the
+ previous 24-hour interval."
+ ::= { optIfOMSnSrcPrevDayEntry 6 }
+
+optIfOMSnSrcPrevDayHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power at the input during the
+ previous 24-hour interval."
+ ::= { optIfOMSnSrcPrevDayEntry 7 }
+
+-- the optIfOChGroup group
+-- This group handles the configuration and performance monitoring
+-- information for OChGroup layers.
+
+-- OChGroup config table
+
+optIfOChGroupConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OChGroup configuration information."
+ ::= { optIfOChGroup 1 }
+
+optIfOChGroupConfigEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup configuration
+ information of an interface."
+ INDEX { ifIndex }
+ ::= { optIfOChGroupConfigTable 1 }
+
+OptIfOChGroupConfigEntry ::=
+ SEQUENCE {
+ optIfOChGroupDirectionality OptIfDirectionality
+ }
+
+optIfOChGroupDirectionality OBJECT-TYPE
+ SYNTAX OptIfDirectionality
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the entity."
+ ::= { optIfOChGroupConfigEntry 1 }
+
+-- OChGroup sink current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOChGroupSinkCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupSinkCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OChGroup sink performance monitoring information for
+ the current 15-minute interval."
+ ::= { optIfOChGroup 2 }
+
+optIfOChGroupSinkCurrentEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupSinkCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup sink performance
+ monitoring information of an interface for the current
+ 15-minute interval."
+ INDEX { ifIndex }
+ ::= { optIfOChGroupSinkCurrentTable 1 }
+
+OptIfOChGroupSinkCurrentEntry ::=
+ SEQUENCE {
+ optIfOChGroupSinkCurrentSuspectedFlag TruthValue,
+ optIfOChGroupSinkCurrentAggregatedInputPower Integer32,
+ optIfOChGroupSinkCurrentLowAggregatedInputPower Integer32,
+ optIfOChGroupSinkCurrentHighAggregatedInputPower Integer32,
+ optIfOChGroupSinkCurrentLowerInputPowerThreshold Integer32,
+ optIfOChGroupSinkCurrentUpperInputPowerThreshold Integer32,
+ optIfOChGroupSinkCurrentOutputPower Integer32,
+ optIfOChGroupSinkCurrentLowOutputPower Integer32,
+ optIfOChGroupSinkCurrentHighOutputPower Integer32,
+ optIfOChGroupSinkCurrentLowerOutputPowerThreshold Integer32,
+ optIfOChGroupSinkCurrentUpperOutputPowerThreshold Integer32
+ }
+
+optIfOChGroupSinkCurrentSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChGroupSinkCurrentEntry 1 }
+
+optIfOChGroupSinkCurrentAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The aggregated optical power of all the DWDM input
+ channels in the OChGroup."
+ ::= { optIfOChGroupSinkCurrentEntry 2 }
+
+optIfOChGroupSinkCurrentLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power of all the DWDM input
+ channels in the OChGroup during the current 15-minute interval."
+ ::= { optIfOChGroupSinkCurrentEntry 3 }
+
+optIfOChGroupSinkCurrentHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power of all the DWDM input
+ channels in the OChGroup during the current 15-minute interval."
+ ::= { optIfOChGroupSinkCurrentEntry 4 }
+
+
+optIfOChGroupSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on aggregated input power. If
+ optIfOChGroupSinkCurrentAggregatedInputPower drops to this value
+ or below, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChGroupSinkCurrentEntry 5 }
+
+optIfOChGroupSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on aggregated input power. If
+ optIfOChGroupSinkCurrentAggregatedInputPower reaches or exceeds
+ this value, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChGroupSinkCurrentEntry 6 }
+
+optIfOChGroupSinkCurrentOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the output
+ in the OChGroup."
+ ::= { optIfOChGroupSinkCurrentEntry 7 }
+
+optIfOChGroupSinkCurrentLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output
+ in the OChGroup during the current 15-minute interval."
+ ::= { optIfOChGroupSinkCurrentEntry 8 }
+
+optIfOChGroupSinkCurrentHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output
+ in the OChGroup during the current 15-minute interval."
+ ::= { optIfOChGroupSinkCurrentEntry 9 }
+
+optIfOChGroupSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on the output power. If
+ optIfOChGroupSinkCurrentOutputPower drops to this value
+ or below, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChGroupSinkCurrentEntry 10 }
+
+optIfOChGroupSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on the output power. If
+ optIfOChGroupSinkCurrentOutputPower reaches or exceeds
+ this value, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChGroupSinkCurrentEntry 11 }
+
+-- OChGroup sink interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOChGroupSinkIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupSinkIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of historical OChGroup sink performance monitoring
+ information."
+ ::= { optIfOChGroup 3 }
+
+optIfOChGroupSinkIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupSinkIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup sink performance
+ monitoring information of an interface during a particular
+ historical interval."
+ INDEX { ifIndex, optIfOChGroupSinkIntervalNumber }
+ ::= { optIfOChGroupSinkIntervalTable 1 }
+
+OptIfOChGroupSinkIntervalEntry ::=
+ SEQUENCE {
+ optIfOChGroupSinkIntervalNumber OptIfIntervalNumber,
+ optIfOChGroupSinkIntervalSuspectedFlag TruthValue,
+ optIfOChGroupSinkIntervalLastAggregatedInputPower Integer32,
+ optIfOChGroupSinkIntervalLowAggregatedInputPower Integer32,
+ optIfOChGroupSinkIntervalHighAggregatedInputPower Integer32,
+ optIfOChGroupSinkIntervalLastOutputPower Integer32,
+ optIfOChGroupSinkIntervalLowOutputPower Integer32,
+ optIfOChGroupSinkIntervalHighOutputPower Integer32
+ }
+
+optIfOChGroupSinkIntervalNumber OBJECT-TYPE
+ SYNTAX OptIfIntervalNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the interval."
+ ::= { optIfOChGroupSinkIntervalEntry 1 }
+
+optIfOChGroupSinkIntervalSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChGroupSinkIntervalEntry 2 }
+
+optIfOChGroupSinkIntervalLastAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last aggregated optical power of all the DWDM input
+ channels in the OChGroup during the interval."
+ ::= { optIfOChGroupSinkIntervalEntry 3 }
+
+optIfOChGroupSinkIntervalLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power of all the DWDM input
+ channels in the OChGroup during the interval."
+ ::= { optIfOChGroupSinkIntervalEntry 4 }
+
+optIfOChGroupSinkIntervalHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power of all the DWDM input
+ channels in the OChGroup during the interval."
+ ::= { optIfOChGroupSinkIntervalEntry 5 }
+
+optIfOChGroupSinkIntervalLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output
+ in the OChGroup during the interval."
+ ::= { optIfOChGroupSinkIntervalEntry 6 }
+
+optIfOChGroupSinkIntervalLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output
+ in the OChGroup during the interval."
+ ::= { optIfOChGroupSinkIntervalEntry 7 }
+
+optIfOChGroupSinkIntervalHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output
+ in the OChGroup during the interval."
+ ::= { optIfOChGroupSinkIntervalEntry 8 }
+
+-- OChGroup sink current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOChGroupSinkCurDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupSinkCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OChGroup sink performance monitoring information for
+ the current 24-hour interval."
+ ::= { optIfOChGroup 4 }
+
+optIfOChGroupSinkCurDayEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupSinkCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup sink performance
+ monitoring information of an interface for the current
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOChGroupSinkCurDayTable 1 }
+
+OptIfOChGroupSinkCurDayEntry ::=
+ SEQUENCE {
+ optIfOChGroupSinkCurDaySuspectedFlag TruthValue,
+ optIfOChGroupSinkCurDayLowAggregatedInputPower Integer32,
+ optIfOChGroupSinkCurDayHighAggregatedInputPower Integer32,
+ optIfOChGroupSinkCurDayLowOutputPower Integer32,
+ optIfOChGroupSinkCurDayHighOutputPower Integer32
+ }
+
+optIfOChGroupSinkCurDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChGroupSinkCurDayEntry 1 }
+
+optIfOChGroupSinkCurDayLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power of all the DWDM input
+ channels in the OChGroup during the current 24-hour interval."
+ ::= { optIfOChGroupSinkCurDayEntry 2 }
+
+optIfOChGroupSinkCurDayHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power of all the DWDM input
+ channels in the OChGroup during the current 24-hour interval."
+ ::= { optIfOChGroupSinkCurDayEntry 3 }
+
+optIfOChGroupSinkCurDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output
+ in the OChGroup during the current 24-hour interval."
+ ::= { optIfOChGroupSinkCurDayEntry 4 }
+
+optIfOChGroupSinkCurDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output
+ in the OChGroup during the current 24-hour interval."
+ ::= { optIfOChGroupSinkCurDayEntry 5 }
+
+-- OChGroup sink previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOChGroupSinkPrevDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupSinkPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OChGroup sink performance monitoring information for
+ the previous 24-hour interval."
+ ::= { optIfOChGroup 5 }
+
+optIfOChGroupSinkPrevDayEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupSinkPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup sink performance
+ monitoring information of an interface for the previous
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOChGroupSinkPrevDayTable 1 }
+
+OptIfOChGroupSinkPrevDayEntry ::=
+ SEQUENCE {
+ optIfOChGroupSinkPrevDaySuspectedFlag TruthValue,
+ optIfOChGroupSinkPrevDayLastAggregatedInputPower Integer32,
+ optIfOChGroupSinkPrevDayLowAggregatedInputPower Integer32,
+ optIfOChGroupSinkPrevDayHighAggregatedInputPower Integer32,
+ optIfOChGroupSinkPrevDayLastOutputPower Integer32,
+ optIfOChGroupSinkPrevDayLowOutputPower Integer32,
+ optIfOChGroupSinkPrevDayHighOutputPower Integer32
+ }
+
+optIfOChGroupSinkPrevDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChGroupSinkPrevDayEntry 1 }
+
+optIfOChGroupSinkPrevDayLastAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last aggregated optical power of all the DWDM input
+ channels in the OChGroup during the previous 24-hour interval."
+ ::= { optIfOChGroupSinkPrevDayEntry 2 }
+
+optIfOChGroupSinkPrevDayLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power of all the DWDM input
+ channels in the OChGroup during the previous 24-hour interval."
+ ::= { optIfOChGroupSinkPrevDayEntry 3 }
+
+optIfOChGroupSinkPrevDayHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power of all the DWDM input
+ channels in the OChGroup during the previous 24-hour interval."
+ ::= { optIfOChGroupSinkPrevDayEntry 4 }
+
+optIfOChGroupSinkPrevDayLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output
+ in the OChGroup during the previous 24-hour interval."
+ ::= { optIfOChGroupSinkPrevDayEntry 5 }
+
+optIfOChGroupSinkPrevDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output
+ in the OChGroup during the previous 24-hour interval."
+ ::= { optIfOChGroupSinkPrevDayEntry 6 }
+
+optIfOChGroupSinkPrevDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output
+ in the OChGroup during the previous 24-hour interval."
+ ::= { optIfOChGroupSinkPrevDayEntry 7 }
+
+-- OChGroup source current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOChGroupSrcCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupSrcCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OChGroup source performance monitoring information for
+ the current 15-minute interval."
+ ::= { optIfOChGroup 6 }
+
+optIfOChGroupSrcCurrentEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupSrcCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup source performance
+ monitoring information of an interface for the current
+ 15-minute interval."
+ INDEX { ifIndex }
+ ::= { optIfOChGroupSrcCurrentTable 1 }
+
+OptIfOChGroupSrcCurrentEntry ::=
+ SEQUENCE {
+ optIfOChGroupSrcCurrentSuspectedFlag TruthValue,
+ optIfOChGroupSrcCurrentOutputPower Integer32,
+ optIfOChGroupSrcCurrentLowOutputPower Integer32,
+ optIfOChGroupSrcCurrentHighOutputPower Integer32,
+ optIfOChGroupSrcCurrentLowerOutputPowerThreshold Integer32,
+ optIfOChGroupSrcCurrentUpperOutputPowerThreshold Integer32,
+ optIfOChGroupSrcCurrentAggregatedInputPower Integer32,
+ optIfOChGroupSrcCurrentLowAggregatedInputPower Integer32,
+ optIfOChGroupSrcCurrentHighAggregatedInputPower Integer32,
+ optIfOChGroupSrcCurrentLowerInputPowerThreshold Integer32,
+ optIfOChGroupSrcCurrentUpperInputPowerThreshold Integer32
+ }
+
+optIfOChGroupSrcCurrentSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChGroupSrcCurrentEntry 1 }
+
+optIfOChGroupSrcCurrentOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the output."
+ ::= { optIfOChGroupSrcCurrentEntry 2 }
+
+optIfOChGroupSrcCurrentLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOChGroupSrcCurrentEntry 3 }
+
+optIfOChGroupSrcCurrentHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOChGroupSrcCurrentEntry 4 }
+
+optIfOChGroupSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on output power. If
+ optIfOChGroupSrcCurrentOutputPower drops to this value or below,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChGroupSrcCurrentEntry 5 }
+
+optIfOChGroupSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on output power. If
+ optIfOChGroupSrcCurrentOutputPower reaches or exceeds this value,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChGroupSrcCurrentEntry 6 }
+
+optIfOChGroupSrcCurrentAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The aggregated optical power monitored at the input."
+ ::= { optIfOChGroupSrcCurrentEntry 7 }
+
+optIfOChGroupSrcCurrentLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power monitored at the input
+ during the current 15-minute interval."
+ ::= { optIfOChGroupSrcCurrentEntry 8 }
+
+optIfOChGroupSrcCurrentHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power monitored at the input
+ during the current 15-minute interval."
+ ::= { optIfOChGroupSrcCurrentEntry 9 }
+
+optIfOChGroupSrcCurrentLowerInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on input power. If
+ optIfOChGroupSrcCurrentAggregatedInputPower drops to this value
+ or below, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChGroupSrcCurrentEntry 10 }
+
+optIfOChGroupSrcCurrentUpperInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on input power. If
+ optIfOChGroupSrcCurrentAggregatedInputPower reaches or exceeds
+ this value, a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChGroupSrcCurrentEntry 11 }
+
+-- OChGroup source interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOChGroupSrcIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupSrcIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of historical OChGroup source performance monitoring
+ information."
+ ::= { optIfOChGroup 7 }
+
+optIfOChGroupSrcIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupSrcIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup source performance
+ monitoring information of an interface during a particular
+ historical interval."
+ INDEX { ifIndex, optIfOChGroupSrcIntervalNumber }
+ ::= { optIfOChGroupSrcIntervalTable 1 }
+
+OptIfOChGroupSrcIntervalEntry ::=
+ SEQUENCE {
+ optIfOChGroupSrcIntervalNumber OptIfIntervalNumber,
+ optIfOChGroupSrcIntervalSuspectedFlag TruthValue,
+ optIfOChGroupSrcIntervalLastOutputPower Integer32,
+ optIfOChGroupSrcIntervalLowOutputPower Integer32,
+ optIfOChGroupSrcIntervalHighOutputPower Integer32,
+ optIfOChGroupSrcIntervalLastAggregatedInputPower Integer32,
+ optIfOChGroupSrcIntervalLowAggregatedInputPower Integer32,
+ optIfOChGroupSrcIntervalHighAggregatedInputPower Integer32
+ }
+
+optIfOChGroupSrcIntervalNumber OBJECT-TYPE
+ SYNTAX OptIfIntervalNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the interval."
+ ::= { optIfOChGroupSrcIntervalEntry 1 }
+
+optIfOChGroupSrcIntervalSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChGroupSrcIntervalEntry 2 }
+
+optIfOChGroupSrcIntervalLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ interval."
+ ::= { optIfOChGroupSrcIntervalEntry 3 }
+
+optIfOChGroupSrcIntervalLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ interval."
+ ::= { optIfOChGroupSrcIntervalEntry 4 }
+
+optIfOChGroupSrcIntervalHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ interval."
+ ::= { optIfOChGroupSrcIntervalEntry 5 }
+
+optIfOChGroupSrcIntervalLastAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last aggregated optical power monitored at the input
+ during the interval."
+ ::= { optIfOChGroupSrcIntervalEntry 6 }
+
+optIfOChGroupSrcIntervalLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power monitored at the input
+ during the interval."
+ ::= { optIfOChGroupSrcIntervalEntry 7 }
+
+optIfOChGroupSrcIntervalHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power monitored at the input
+ during the interval."
+ ::= { optIfOChGroupSrcIntervalEntry 8 }
+
+-- OChGroup source current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOChGroupSrcCurDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupSrcCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OChGroup source performance monitoring information for
+ the current 24-hour interval."
+ ::= { optIfOChGroup 8 }
+
+optIfOChGroupSrcCurDayEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupSrcCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup source performance
+ monitoring information of an interface for the current
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOChGroupSrcCurDayTable 1 }
+
+OptIfOChGroupSrcCurDayEntry ::=
+ SEQUENCE {
+ optIfOChGroupSrcCurDaySuspectedFlag TruthValue,
+ optIfOChGroupSrcCurDayLowOutputPower Integer32,
+ optIfOChGroupSrcCurDayHighOutputPower Integer32,
+ optIfOChGroupSrcCurDayLowAggregatedInputPower Integer32,
+ optIfOChGroupSrcCurDayHighAggregatedInputPower Integer32
+ }
+
+optIfOChGroupSrcCurDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChGroupSrcCurDayEntry 1 }
+
+optIfOChGroupSrcCurDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOChGroupSrcCurDayEntry 2 }
+
+optIfOChGroupSrcCurDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOChGroupSrcCurDayEntry 3 }
+
+optIfOChGroupSrcCurDayLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power monitored at the input
+ during the current 24-hour interval."
+ ::= { optIfOChGroupSrcCurDayEntry 4 }
+
+optIfOChGroupSrcCurDayHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power monitored at the input
+ during the current 24-hour interval."
+ ::= { optIfOChGroupSrcCurDayEntry 5 }
+
+-- OChGroup source previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOChGroupSrcPrevDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChGroupSrcPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OChGroup source performance monitoring information for
+ the previous 24-hour interval."
+ ::= { optIfOChGroup 9 }
+
+optIfOChGroupSrcPrevDayEntry OBJECT-TYPE
+ SYNTAX OptIfOChGroupSrcPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OChGroup source performance
+ monitoring information of an interface for the previous
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOChGroupSrcPrevDayTable 1 }
+
+OptIfOChGroupSrcPrevDayEntry ::=
+ SEQUENCE {
+ optIfOChGroupSrcPrevDaySuspectedFlag TruthValue,
+ optIfOChGroupSrcPrevDayLastOutputPower Integer32,
+ optIfOChGroupSrcPrevDayLowOutputPower Integer32,
+ optIfOChGroupSrcPrevDayHighOutputPower Integer32,
+ optIfOChGroupSrcPrevDayLastAggregatedInputPower Integer32,
+ optIfOChGroupSrcPrevDayLowAggregatedInputPower Integer32,
+ optIfOChGroupSrcPrevDayHighAggregatedInputPower Integer32
+ }
+
+optIfOChGroupSrcPrevDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChGroupSrcPrevDayEntry 1 }
+
+optIfOChGroupSrcPrevDayLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOChGroupSrcPrevDayEntry 2 }
+
+optIfOChGroupSrcPrevDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOChGroupSrcPrevDayEntry 3 }
+
+optIfOChGroupSrcPrevDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOChGroupSrcPrevDayEntry 4 }
+
+optIfOChGroupSrcPrevDayLastAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last aggregated optical power monitored at the input
+ during the previous 24-hour interval."
+ ::= { optIfOChGroupSrcPrevDayEntry 5 }
+
+optIfOChGroupSrcPrevDayLowAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest aggregated optical power monitored at the input
+ during the previous 24-hour interval."
+ ::= { optIfOChGroupSrcPrevDayEntry 6 }
+
+optIfOChGroupSrcPrevDayHighAggregatedInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest aggregated optical power monitored at the input
+ during the previous 24-hour interval."
+ ::= { optIfOChGroupSrcPrevDayEntry 7 }
+
+-- the optIfOCh group
+-- This group handles the configuration and
+-- performance monitoring information for OCh layers.
+
+-- OCh config table
+
+optIfOChConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OCh configuration information."
+ ::= { optIfOCh 1 }
+
+optIfOChConfigEntry OBJECT-TYPE
+ SYNTAX OptIfOChConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh configuration
+ information of an interface."
+ INDEX { ifIndex }
+ ::= { optIfOChConfigTable 1 }
+
+OptIfOChConfigEntry ::=
+ SEQUENCE {
+ optIfOChDirectionality OptIfDirectionality,
+ optIfOChCurrentStatus BITS
+ }
+
+optIfOChDirectionality OBJECT-TYPE
+ SYNTAX OptIfDirectionality
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the entity."
+ ::= { optIfOChConfigEntry 1 }
+
+optIfOChCurrentStatus OBJECT-TYPE
+ SYNTAX BITS {
+ losP(0),
+ los(1),
+ oci(2),
+ ssfP(3),
+ ssfO(4),
+ ssf(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the defect condition of the entity, if any.
+ This object is applicable when optIfOChDirectionality
+ has the value sink(1) or bidirectional(3).
+ In full-capability systems the bit position los(1) is not used.
+ In reduced-capability systems or at IrDI interfaces only
+ the bit positions los(1) and ssfP(3) are used."
+ ::= { optIfOChConfigEntry 2 }
+
+-- OCh sink current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOChSinkCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChSinkCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OCh sink performance monitoring information for
+ the current 15-minute interval."
+ ::= { optIfOCh 2 }
+
+optIfOChSinkCurrentEntry OBJECT-TYPE
+ SYNTAX OptIfOChSinkCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh sink performance
+ monitoring information for an interface for the current
+ 15-minute interval."
+ INDEX { ifIndex }
+ ::= { optIfOChSinkCurrentTable 1 }
+
+OptIfOChSinkCurrentEntry ::=
+ SEQUENCE {
+ optIfOChSinkCurrentSuspectedFlag TruthValue,
+ optIfOChSinkCurrentInputPower Integer32,
+ optIfOChSinkCurrentLowInputPower Integer32,
+ optIfOChSinkCurrentHighInputPower Integer32,
+ optIfOChSinkCurrentLowerInputPowerThreshold Integer32,
+ optIfOChSinkCurrentUpperInputPowerThreshold Integer32
+ }
+
+optIfOChSinkCurrentSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChSinkCurrentEntry 1 }
+
+optIfOChSinkCurrentInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the input."
+ ::= { optIfOChSinkCurrentEntry 2 }
+
+optIfOChSinkCurrentLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ current 15-minute interval."
+ ::= { optIfOChSinkCurrentEntry 3 }
+
+optIfOChSinkCurrentHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ current 15-minute interval."
+ ::= { optIfOChSinkCurrentEntry 4 }
+
+optIfOChSinkCurrentLowerInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on input power. If
+ optIfOChSinkCurrentInputPower drops to this value or below,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChSinkCurrentEntry 5 }
+
+optIfOChSinkCurrentUpperInputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on input power. If
+ optIfOChSinkCurrentInputPower reaches or exceeds this value,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChSinkCurrentEntry 6 }
+
+-- OCh sink interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOChSinkIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChSinkIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of historical OCh sink performance monitoring
+ information."
+ ::= { optIfOCh 3 }
+
+optIfOChSinkIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfOChSinkIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh sink performance
+ monitoring information of an interface during a particular
+ historical interval."
+ INDEX { ifIndex, optIfOChSinkIntervalNumber }
+ ::= { optIfOChSinkIntervalTable 1 }
+
+OptIfOChSinkIntervalEntry ::=
+ SEQUENCE {
+ optIfOChSinkIntervalNumber OptIfIntervalNumber,
+ optIfOChSinkIntervalSuspectedFlag TruthValue,
+ optIfOChSinkIntervalLastInputPower Integer32,
+ optIfOChSinkIntervalLowInputPower Integer32,
+ optIfOChSinkIntervalHighInputPower Integer32
+ }
+
+optIfOChSinkIntervalNumber OBJECT-TYPE
+ SYNTAX OptIfIntervalNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the interval."
+ ::= { optIfOChSinkIntervalEntry 1 }
+
+optIfOChSinkIntervalSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChSinkIntervalEntry 2 }
+
+optIfOChSinkIntervalLastInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the input during the
+ interval."
+ ::= { optIfOChSinkIntervalEntry 3 }
+
+optIfOChSinkIntervalLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ interval."
+ ::= { optIfOChSinkIntervalEntry 4 }
+
+optIfOChSinkIntervalHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ interval."
+ ::= { optIfOChSinkIntervalEntry 5 }
+
+-- OCh sink current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOChSinkCurDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChSinkCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OCh sink performance monitoring information for
+ the current 24-hour interval."
+ ::= { optIfOCh 4 }
+
+optIfOChSinkCurDayEntry OBJECT-TYPE
+ SYNTAX OptIfOChSinkCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh sink performance
+ monitoring information of an interface for the current
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOChSinkCurDayTable 1 }
+
+OptIfOChSinkCurDayEntry ::=
+ SEQUENCE {
+ optIfOChSinkCurDaySuspectedFlag TruthValue,
+ optIfOChSinkCurDayLowInputPower Integer32,
+ optIfOChSinkCurDayHighInputPower Integer32
+ }
+
+optIfOChSinkCurDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChSinkCurDayEntry 1 }
+
+optIfOChSinkCurDayLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ current 24-hour interval."
+ ::= { optIfOChSinkCurDayEntry 2 }
+
+optIfOChSinkCurDayHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ current 24-hour interval."
+ ::= { optIfOChSinkCurDayEntry 3 }
+
+-- OCh sink previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOChSinkPrevDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChSinkPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OCh sink performance monitoring information for
+ the previous 24-hour interval."
+ ::= { optIfOCh 5 }
+
+optIfOChSinkPrevDayEntry OBJECT-TYPE
+ SYNTAX OptIfOChSinkPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh sink performance
+ monitoring information of an interface for the previous
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOChSinkPrevDayTable 1 }
+
+OptIfOChSinkPrevDayEntry ::=
+ SEQUENCE {
+ optIfOChSinkPrevDaySuspectedFlag TruthValue,
+ optIfOChSinkPrevDayLastInputPower Integer32,
+ optIfOChSinkPrevDayLowInputPower Integer32,
+ optIfOChSinkPrevDayHighInputPower Integer32
+ }
+
+optIfOChSinkPrevDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChSinkPrevDayEntry 1 }
+
+optIfOChSinkPrevDayLastInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOChSinkPrevDayEntry 2 }
+
+optIfOChSinkPrevDayLowInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOChSinkPrevDayEntry 3 }
+
+optIfOChSinkPrevDayHighInputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the input during the
+ previous 24-hour interval."
+ ::= { optIfOChSinkPrevDayEntry 4 }
+
+-- OCh source current table
+-- Contains data for the current 15-minute performance monitoring
+-- interval.
+
+optIfOChSrcCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChSrcCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OCh source performance monitoring information for
+ the current 15-minute interval."
+ ::= { optIfOCh 6 }
+
+optIfOChSrcCurrentEntry OBJECT-TYPE
+ SYNTAX OptIfOChSrcCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh source performance
+ monitoring information of an interface for the current
+ 15-minute interval."
+ INDEX { ifIndex }
+ ::= { optIfOChSrcCurrentTable 1 }
+
+OptIfOChSrcCurrentEntry ::=
+ SEQUENCE {
+ optIfOChSrcCurrentSuspectedFlag TruthValue,
+ optIfOChSrcCurrentOutputPower Integer32,
+ optIfOChSrcCurrentLowOutputPower Integer32,
+ optIfOChSrcCurrentHighOutputPower Integer32,
+ optIfOChSrcCurrentLowerOutputPowerThreshold Integer32,
+ optIfOChSrcCurrentUpperOutputPowerThreshold Integer32
+ }
+
+optIfOChSrcCurrentSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChSrcCurrentEntry 1 }
+
+optIfOChSrcCurrentOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The optical power monitored at the output."
+ ::= { optIfOChSrcCurrentEntry 2 }
+
+optIfOChSrcCurrentLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOChSrcCurrentEntry 3 }
+
+optIfOChSrcCurrentHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 15-minute interval."
+ ::= { optIfOChSrcCurrentEntry 4 }
+
+optIfOChSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower limit threshold on output power. If
+ optIfOChSrcCurrentOutputPower drops to this value or below,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChSrcCurrentEntry 5 }
+
+optIfOChSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper limit threshold on output power. If
+ optIfOChSrcCurrentOutputPower reaches or exceeds this value,
+ a Threshold Crossing Alert (TCA) should be sent."
+ ::= { optIfOChSrcCurrentEntry 6 }
+
+-- OCh source interval table
+-- Contains data for previous 15-minute performance monitoring
+-- intervals.
+
+optIfOChSrcIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChSrcIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of historical OCh source performance monitoring
+ information."
+ ::= { optIfOCh 7 }
+
+optIfOChSrcIntervalEntry OBJECT-TYPE
+ SYNTAX OptIfOChSrcIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh source performance
+ monitoring information of an interface during a particular
+ historical interval."
+ INDEX { ifIndex, optIfOChSrcIntervalNumber }
+ ::= { optIfOChSrcIntervalTable 1 }
+
+OptIfOChSrcIntervalEntry ::=
+ SEQUENCE {
+ optIfOChSrcIntervalNumber OptIfIntervalNumber,
+ optIfOChSrcIntervalSuspectedFlag TruthValue,
+ optIfOChSrcIntervalLastOutputPower Integer32,
+ optIfOChSrcIntervalLowOutputPower Integer32,
+ optIfOChSrcIntervalHighOutputPower Integer32
+ }
+
+optIfOChSrcIntervalNumber OBJECT-TYPE
+ SYNTAX OptIfIntervalNumber
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies the interval."
+ ::= { optIfOChSrcIntervalEntry 1 }
+
+optIfOChSrcIntervalSuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChSrcIntervalEntry 2 }
+
+optIfOChSrcIntervalLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ interval."
+ ::= { optIfOChSrcIntervalEntry 3 }
+
+optIfOChSrcIntervalLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ interval."
+ ::= { optIfOChSrcIntervalEntry 4 }
+
+optIfOChSrcIntervalHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ interval."
+ ::= { optIfOChSrcIntervalEntry 5 }
+
+-- OCh source current day table
+-- Contains data for the current 24-hour performance
+-- monitoring interval.
+
+optIfOChSrcCurDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChSrcCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OCh source performance monitoring information for
+ the current 24-hour interval."
+ ::= { optIfOCh 8 }
+
+optIfOChSrcCurDayEntry OBJECT-TYPE
+ SYNTAX OptIfOChSrcCurDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh source performance
+ monitoring information of an interface for the current
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOChSrcCurDayTable 1 }
+
+OptIfOChSrcCurDayEntry ::=
+ SEQUENCE {
+ optIfOChSrcCurDaySuspectedFlag TruthValue,
+ optIfOChSrcCurDayLowOutputPower Integer32,
+ optIfOChSrcCurDayHighOutputPower Integer32
+ }
+
+optIfOChSrcCurDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChSrcCurDayEntry 1 }
+
+optIfOChSrcCurDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOChSrcCurDayEntry 2 }
+
+optIfOChSrcCurDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ current 24-hour interval."
+ ::= { optIfOChSrcCurDayEntry 3 }
+
+-- OCh source previous day table
+-- Contains data for the previous 24-hour performance
+-- monitoring interval.
+
+optIfOChSrcPrevDayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOChSrcPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OCh source performance monitoring information for
+ the previous 24-hour interval."
+ ::= { optIfOCh 9 }
+
+optIfOChSrcPrevDayEntry OBJECT-TYPE
+ SYNTAX OptIfOChSrcPrevDayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OCh source performance
+ monitoring information of an interface for the previous
+ 24-hour interval."
+ INDEX { ifIndex }
+ ::= { optIfOChSrcPrevDayTable 1 }
+
+OptIfOChSrcPrevDayEntry ::=
+ SEQUENCE {
+ optIfOChSrcPrevDaySuspectedFlag TruthValue,
+ optIfOChSrcPrevDayLastOutputPower Integer32,
+ optIfOChSrcPrevDayLowOutputPower Integer32,
+ optIfOChSrcPrevDayHighOutputPower Integer32
+ }
+
+optIfOChSrcPrevDaySuspectedFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "If true, the data in this entry may be unreliable."
+ ::= { optIfOChSrcPrevDayEntry 1 }
+
+optIfOChSrcPrevDayLastOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOChSrcPrevDayEntry 2 }
+
+optIfOChSrcPrevDayLowOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The lowest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOChSrcPrevDayEntry 3 }
+
+optIfOChSrcPrevDayHighOutputPower OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.1 dbm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The highest optical power monitored at the output during the
+ previous 24-hour interval."
+ ::= { optIfOChSrcPrevDayEntry 4 }
+
+-- the optIfOTUk group
+-- This group handles the configuration
+-- information for OTUk layers.
+
+-- OTUk config table
+
+optIfOTUkConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfOTUkConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of OTUk configuration information."
+ ::= { optIfOTUk 1 }
+
+optIfOTUkConfigEntry OBJECT-TYPE
+ SYNTAX OptIfOTUkConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains OTUk configuration
+ information of an interface."
+ INDEX { ifIndex }
+ ::= { optIfOTUkConfigTable 1 }
+
+OptIfOTUkConfigEntry ::=
+ SEQUENCE {
+ optIfOTUkDirectionality OptIfDirectionality,
+ optIfOTUkBitRateK OptIfBitRateK,
+ optIfOTUkTraceIdentifierTransmitted OptIfTxTI,
+ optIfOTUkDAPIExpected OptIfExDAPI,
+ optIfOTUkSAPIExpected OptIfExSAPI,
+ optIfOTUkTraceIdentifierAccepted OptIfAcTI,
+ optIfOTUkTIMDetMode OptIfTIMDetMode,
+ optIfOTUkTIMActEnabled TruthValue,
+ optIfOTUkDEGThr OptIfDEGThr,
+ optIfOTUkDEGM OptIfDEGM,
+ optIfOTUkSinkAdaptActive TruthValue,
+ optIfOTUkSourceAdaptActive TruthValue,
+ optIfOTUkSinkFECEnabled TruthValue,
+ optIfOTUkCurrentStatus BITS
+ }
+
+optIfOTUkDirectionality OBJECT-TYPE
+ SYNTAX OptIfDirectionality
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the entity."
+ ::= { optIfOTUkConfigEntry 1 }
+
+optIfOTUkBitRateK OBJECT-TYPE
+ SYNTAX OptIfBitRateK
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the bit rate of the entity."
+ ::= { optIfOTUkConfigEntry 2 }
+
+optIfOTUkTraceIdentifierTransmitted OBJECT-TYPE
+ SYNTAX OptIfTxTI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The trace identifier transmitted.
+ This object is applicable when optIfOTUkDirectionality
+ has the value source(2) or bidirectional(3). It must not
+ be instantiated in rows where optIfOTUkDirectionality
+ has the value sink(1).
+ If no value is ever set by a management entity for this
+ object, system-specific default value will be used.
+ Any implementation that instantiates this object must
+ document the system-specific default value or how it
+ is derived."
+ ::= { optIfOTUkConfigEntry 3 }
+
+optIfOTUkDAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExDAPI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The DAPI expected by the receiver.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ This object has no effect when optIfOTUkTIMDetMode has
+ the value off(1)."
+ ::= { optIfOTUkConfigEntry 4 }
+
+optIfOTUkSAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExSAPI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SAPI expected by the receiver.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ This object has no effect when optIfOTUkTIMDetMode has
+ the value off(1)."
+ ::= { optIfOTUkConfigEntry 5 }
+
+optIfOTUkTraceIdentifierAccepted OBJECT-TYPE
+ SYNTAX OptIfAcTI
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual trace identifier accepted.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ The value of this object is unspecified when
+ optIfOTUkCurrentStatus indicates a near-end defect
+ (i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents
+ extraction of the trace message."
+ ::= { optIfOTUkConfigEntry 6 }
+
+optIfOTUkTIMDetMode OBJECT-TYPE
+ SYNTAX OptIfTIMDetMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of the Trace Identifier Mismatch (TIM)
+ Detection function.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ The default value of this object is off(1)."
+ ::= { optIfOTUkConfigEntry 7 }
+
+optIfOTUkTIMActEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the Trace Identifier Mismatch (TIM)
+ Consequent Action function is enabled.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ This object has no effect when optIfOTUkTIMDetMode has
+ the value off(1).
+ The default value of this object is false(2)."
+ ::= { optIfOTUkConfigEntry 8 }
+
+optIfOTUkDEGThr OBJECT-TYPE
+ SYNTAX OptIfDEGThr
+ UNITS "percentage"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a performance
+ monitoring (PM) Second to be bad. A PM Second is declared bad if
+ the percentage of detected errored blocks in that second is
+ greater than or equal to optIfOTUkDEGThr.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ The default value of this object is Severely Errored Second
+ (SES) Estimator (See ITU-T G.7710)."
+ ::= { optIfOTUkConfigEntry 9 }
+
+optIfOTUkDEGM OBJECT-TYPE
+ SYNTAX OptIfDEGM
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a Degraded Signal
+ defect (dDEG). A dDEG shall be declared if optIfOTUkDEGM
+ consecutive bad PM Seconds are detected.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ The default value of this object is 7 (See ITU-T G.7710)."
+ ::= { optIfOTUkConfigEntry 10 }
+
+optIfOTUkSinkAdaptActive OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the sink adaptation function is activated or
+ not.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ The default value of this object is false(2)."
+ ::= { optIfOTUkConfigEntry 11 }
+
+optIfOTUkSourceAdaptActive OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the source adaptation function is activated or
+ not.
+ This object is only applicable to the source function, i.e.,
+ only when optIfOTUkDirectionality has the value source(2)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value sink(1).
+ The default value of this object is false(2)."
+ ::= { optIfOTUkConfigEntry 12 }
+
+optIfOTUkSinkFECEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If Forward Error Correction (FEC) is supported, this object
+ indicates whether FEC at the OTUk sink adaptation function is
+ enabled or not.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2).
+ The default value of this object is true(1)."
+ ::= { optIfOTUkConfigEntry 13 }
+
+optIfOTUkCurrentStatus OBJECT-TYPE
+ SYNTAX BITS {
+ tim(0),
+ deg(1),
+ bdi(2),
+ ssf(3),
+ lof(4),
+ ais(5),
+ lom(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the defect condition of the entity, if any.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfOTUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfOTUkDirectionality has the value source(2)."
+ ::= { optIfOTUkConfigEntry 14 }
+
+-- GCC0 config table
+
+optIfGCC0ConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfGCC0ConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of GCC0 configuration information."
+ ::= { optIfOTUk 2 }
+
+
+optIfGCC0ConfigEntry OBJECT-TYPE
+ SYNTAX OptIfGCC0ConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains GCC0 configuration
+ information of an interface. Each instance must
+ correspond to an instance of optIfOTUkConfigEntry.
+ Separate source and/or sink instances may exist
+ for a given ifIndex value, or a single bidirectional
+ instance may exist, but a bidirectional instance may
+ not coexist with a source or sink instance.
+ Instances of this conceptual row persist across
+ agent restarts."
+ INDEX { ifIndex, optIfGCC0Directionality }
+ ::= { optIfGCC0ConfigTable 1 }
+
+OptIfGCC0ConfigEntry ::=
+ SEQUENCE {
+ optIfGCC0Directionality OptIfDirectionality,
+ optIfGCC0Application SnmpAdminString,
+ optIfGCC0RowStatus RowStatus
+ }
+
+optIfGCC0Directionality OBJECT-TYPE
+ SYNTAX OptIfDirectionality
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the entity.
+ The values source(2) and bidirectional(3) are
+ not allowed if the corresponding instance of
+ optIfOTUkDirectionality has the value sink(1).
+ The values sink(1) and bidirectional(3) are
+ not allowed if the corresponding instance of
+ optIfOTUkDirectionality has the value source(2)."
+ ::= { optIfGCC0ConfigEntry 1 }
+
+optIfGCC0Application OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the application transported by the GCC0 entity.
+ Example applications are ECC, User data channel.
+
+ The value of this object may not be changed when
+ optIfGCC0RowStatus has the value active(1)."
+ ::= { optIfGCC0ConfigEntry 2 }
+
+optIfGCC0RowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This columnar object is used for creating and deleting a
+ conceptual row of the optIfGCC0 config table.
+ It is used to model the addGCC0Access and removeGCC0Access
+ operations of an OTUk_TTP for GCC0 access control as defined
+ in G.874.1. Setting RowStatus to createAndGo or createAndWait
+ implies addGCC0Access. Setting RowStatus to destroy implies
+ removeGCC0Access."
+ ::= { optIfGCC0ConfigEntry 3 }
+
+-- the optIfODUk group
+-- This group handles the configuration information
+-- for the ODUk layers.
+
+-- ODUk config table
+
+optIfODUkConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfODUkConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of ODUk configuration information."
+ ::= { optIfODUk 1 }
+
+optIfODUkConfigEntry OBJECT-TYPE
+ SYNTAX OptIfODUkConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains ODUk configuration
+ information of an interface."
+ INDEX { ifIndex }
+ ::= { optIfODUkConfigTable 1 }
+
+OptIfODUkConfigEntry ::=
+ SEQUENCE {
+ optIfODUkDirectionality OptIfDirectionality,
+ optIfODUkBitRateK OptIfBitRateK,
+ optIfODUkTcmFieldsInUse BITS,
+ optIfODUkPositionSeqCurrentSize Unsigned32,
+ optIfODUkTtpPresent TruthValue
+ }
+
+optIfODUkDirectionality OBJECT-TYPE
+ SYNTAX OptIfDirectionality
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the entity."
+ ::= { optIfODUkConfigEntry 1 }
+
+optIfODUkBitRateK OBJECT-TYPE
+ SYNTAX OptIfBitRateK
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the bit rate of the entity."
+ ::= { optIfODUkConfigEntry 2 }
+
+optIfODUkTcmFieldsInUse OBJECT-TYPE
+ SYNTAX BITS {
+ tcmField1(0),
+ tcmField2(1),
+ tcmField3(2),
+ tcmField4(3),
+ tcmField5(4),
+ tcmField6(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the TCM field(s) that are currently in use.
+ The positions of the bits correspond to the TCM fields.
+ A bit that is set to 1 means that the corresponding TCM
+ field is used. This object will be updated when rows are
+ created in or deleted from the optIfODUkTConfigTable, or
+ the optIfODUkTNimConfigTable."
+ ::= { optIfODUkConfigEntry 3 }
+
+optIfODUkPositionSeqCurrentSize OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the current size of the position
+ sequence (i.e., number of TCM function and/or GCC12
+ access that have been created in the ODUk interface).
+ When the value of this variable is greater than zero,
+ it means that one or more TCM function and/or GCC12
+ access have been created in the ODUk interface. In this
+ case, there will be as many rows in the
+ optIfODUkPositionSeqTable as the value of
+ optIfODUkPositionSeqCurrentSize corresponding to this
+ ODUk interface, one row for each TCM function or GCC12
+ access. The position of the TCM function and/or
+ GCC12 access within the sequence is indicated by the
+ optIfODUkPositionSeqPosition variable in
+ optIfODUkPositionSeqTable.
+ The optIfODUkPositionSeqTable also provides pointers
+ to the corresponding TCM function (optIfODUkT) and
+ GCC12 access (optIfGCC12) entities."
+ ::= { optIfODUkConfigEntry 4 }
+
+optIfODUkTtpPresent OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has the value true(1) if the ifEntry under which
+ it is instantiated contains an ODUk Trail Termination Point,
+ i.e., is the endpoint of an ODUk path. In that case there
+ will be a corresponding row in the ODUk TTP config table and
+ it will not be possible to create corresponding rows in the
+ ODUk NIM config table. This object has the value false(2)
+ if the ifEntry under which it is instantiated contains an
+ intermediate ODUk Connection Termination Point. In that case
+ there is no corresponding row in the ODUk TTP config table,
+ but it will be possible to create corresponding rows in the
+ ODUk NIM config table. This object also affects the allowable
+ options in rows created in the GCC12 config table and in the
+ ODUkT config table, as specified in the DESCRIPTION clauses
+ of the columns in those tables."
+ ::= { optIfODUkConfigEntry 5 }
+
+-- ODUk Trail Termination Point (TTP) config table
+
+optIfODUkTtpConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfODUkTtpConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of ODUk TTP configuration information."
+ ::= { optIfODUk 2 }
+
+optIfODUkTtpConfigEntry OBJECT-TYPE
+ SYNTAX OptIfODUkTtpConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains ODUk TTP configuration
+ information of an interface."
+ INDEX { ifIndex }
+ ::= { optIfODUkTtpConfigTable 1 }
+
+OptIfODUkTtpConfigEntry ::=
+ SEQUENCE {
+ optIfODUkTtpTraceIdentifierTransmitted OptIfTxTI,
+ optIfODUkTtpDAPIExpected OptIfExDAPI,
+ optIfODUkTtpSAPIExpected OptIfExSAPI,
+ optIfODUkTtpTraceIdentifierAccepted OptIfAcTI,
+ optIfODUkTtpTIMDetMode OptIfTIMDetMode,
+ optIfODUkTtpTIMActEnabled TruthValue,
+ optIfODUkTtpDEGThr OptIfDEGThr,
+ optIfODUkTtpDEGM OptIfDEGM,
+ optIfODUkTtpCurrentStatus BITS
+ }
+
+optIfODUkTtpTraceIdentifierTransmitted OBJECT-TYPE
+ SYNTAX OptIfTxTI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The trace identifier transmitted.
+ This object is applicable when optIfODUkDirectionality
+ has the value source(2) or bidirectional(3). It must not
+ be instantiated in rows where optIfODUkDirectionality
+ has the value sink(1).
+ If no value is ever set by a management entity for this
+ object, system-specific default value will be used.
+ Any implementation that instantiates this object must
+ document the system-specific default value or how it
+ is derived."
+ ::= { optIfODUkTtpConfigEntry 1 }
+
+optIfODUkTtpDAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExDAPI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The DAPI expected by the receiver.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfODUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfODUkDirectionality has the value source(2).
+ This object has no effect when optIfODUkTtpTIMDetMode has
+ the value off(1)."
+ ::= { optIfODUkTtpConfigEntry 2 }
+
+optIfODUkTtpSAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExSAPI
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The SAPI expected by the receiver.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfODUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfODUkDirectionality has the value source(2).
+ This object has no effect when optIfODUkTtpTIMDetMode has
+ the value off(1)."
+ ::= { optIfODUkTtpConfigEntry 3 }
+
+optIfODUkTtpTraceIdentifierAccepted OBJECT-TYPE
+ SYNTAX OptIfAcTI
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual trace identifier accepted.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfODUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfODUkDirectionality has the value source(2).
+ The value of this object is unspecified when
+ optIfODUkTtpCurrentStatus indicates a near-end defect
+ (i.e., oci(0), lck(1), ssf(5)) that prevents extraction
+ of the trace message."
+ ::= { optIfODUkTtpConfigEntry 4 }
+
+optIfODUkTtpTIMDetMode OBJECT-TYPE
+ SYNTAX OptIfTIMDetMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of the Trace Identifier Mismatch (TIM)
+ Detection function.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfODUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfODUkDirectionality has the value source(2).
+ The default value of this object is off(1)."
+ ::= { optIfODUkTtpConfigEntry 5 }
+
+optIfODUkTtpTIMActEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the Trace Identifier Mismatch (TIM)
+ Consequent Action function is enabled.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfODUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfODUkDirectionality has the value source(2).
+ This object has no effect when optIfODUkTtpTIMDetMode has
+ the value off(1).
+ The default value of this object is false(2)."
+ ::= { optIfODUkTtpConfigEntry 6 }
+
+optIfODUkTtpDEGThr OBJECT-TYPE
+ SYNTAX OptIfDEGThr
+ UNITS "percentage"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a performance
+ monitoring (PM) Second to be bad. A PM Second is declared bad if
+ the percentage of detected errored blocks in that second is
+ greater than or equal to optIfODUkDEGThr.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfODUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfODUkDirectionality has the value source(2).
+ The default value of this object is Severely Errored Second
+ (SES) Estimator (See ITU-T G.7710)."
+ ::= { optIfODUkTtpConfigEntry 7 }
+
+optIfODUkTtpDEGM OBJECT-TYPE
+ SYNTAX OptIfDEGM
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a Degraded Signal
+ defect (dDEG). A dDEG shall be declared if optIfODUkDEGM
+ consecutive bad PM Seconds are detected.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfODUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfODUkDirectionality has the value source(2).
+ The default value of this object is 7 (See ITU-T G.7710)."
+ ::= { optIfODUkTtpConfigEntry 8 }
+
+optIfODUkTtpCurrentStatus OBJECT-TYPE
+ SYNTAX BITS {
+ oci(0),
+ lck(1),
+ tim(2),
+ deg(3),
+ bdi(4),
+ ssf(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the defect condition of the entity, if any.
+ This object is only applicable to the sink function, i.e.,
+ only when optIfODUkDirectionality has the value sink(1)
+ or bidirectional(3). It must not be instantiated in rows
+ where optIfODUkDirectionality has the value source(2)."
+ ::= { optIfODUkTtpConfigEntry 9 }
+
+-- ODUk Position Sequence table
+
+optIfODUkPositionSeqTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfODUkPositionSeqEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of ODUk Position Sequence information."
+ ::= { optIfODUk 3 }
+
+optIfODUkPositionSeqEntry OBJECT-TYPE
+ SYNTAX OptIfODUkPositionSeqEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains ODUk position sequence
+ information of an ODUk interface. The ODUk interface
+ is identified by the ifIndex. Associated with each
+ ODUk interface there may be one of more conceptual
+ rows in the optIfODUkPositionSeqTable. Each row
+ represents a TCM or GCC12 access function within the
+ associated ODUk interface. Rows of the
+ optIfODUkPositionSeqTable table are created/deleted
+ as the result of the creation/deletion of the optIfODUkT
+ or optIfGCC12 entities."
+ INDEX { ifIndex, optIfODUkPositionSeqIndex }
+ ::= { optIfODUkPositionSeqTable 1 }
+
+OptIfODUkPositionSeqEntry ::=
+ SEQUENCE {
+ optIfODUkPositionSeqIndex Unsigned32,
+ optIfODUkPositionSeqPosition Unsigned32,
+ optIfODUkPositionSeqPointer RowPointer
+ }
+
+optIfODUkPositionSeqIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..4294967295)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This variable identifies a row in the
+ optIfODUkPositionSeqTable Table.
+ Each row of the optIfODUkPositionSeqTable Table
+ represents a TCM or GCC12 access function within the
+ associated ODUk interface."
+ ::= { optIfODUkPositionSeqEntry 1 }
+
+optIfODUkPositionSeqPosition OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the position of the TCM or
+ GCC12 access function within the sequence of TCMs &
+ GCC12 access functions of the associated ODUk
+ interface. The TCM or GCC12 presented by this row is
+ referenced by the optIfODUkPositionSeqPointer variable."
+ ::= { optIfODUkPositionSeqEntry 2 }
+
+optIfODUkPositionSeqPointer OBJECT-TYPE
+ SYNTAX RowPointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable identifies the TCM or GCC12 access function
+ by pointing to the corresponding optIfODUkT or optIfGCC12
+ entity."
+ ::= { optIfODUkPositionSeqEntry 3 }
+
+-- ODUk Non-intrusive monitoring (Nim) config table
+
+optIfODUkNimConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfODUkNimConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of ODUkNim configuration information."
+ ::= { optIfODUk 4 }
+
+optIfODUkNimConfigEntry OBJECT-TYPE
+ SYNTAX OptIfODUkNimConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains ODUkNim configuration
+ information of an interface. Each instance must
+ correspond to an instance of optIfODUkConfigEntry
+ for which optIfODUkTtpPresent has the value false(2).
+
+ Instances of this conceptual row persist across
+ agent restarts, and read-create columns other
+ than the status column may be modified while the
+ row is active."
+ INDEX { ifIndex, optIfODUkNimDirectionality }
+ ::= { optIfODUkNimConfigTable 1 }
+
+OptIfODUkNimConfigEntry ::=
+ SEQUENCE {
+ optIfODUkNimDirectionality OptIfSinkOrSource,
+ optIfODUkNimDAPIExpected OptIfExDAPI,
+ optIfODUkNimSAPIExpected OptIfExSAPI,
+ optIfODUkNimTraceIdentifierAccepted OptIfAcTI,
+ optIfODUkNimTIMDetMode OptIfTIMDetMode,
+ optIfODUkNimTIMActEnabled TruthValue,
+ optIfODUkNimDEGThr OptIfDEGThr,
+ optIfODUkNimDEGM OptIfDEGM,
+ optIfODUkNimCurrentStatus BITS,
+ optIfODUkNimRowStatus RowStatus
+ }
+
+optIfODUkNimDirectionality OBJECT-TYPE
+ SYNTAX OptIfSinkOrSource
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the monitor point for the ODUk Path non-intrusive
+ monitoring function. The value source(2) is not allowed
+ if the corresponding instance of optIfODUkDirectionality
+ has the value sink(1), and the value sink(1) is not allowed
+ if the corresponding instance of optIfODUkDirectionality
+ has the value source(2). Either the value sink(1) or
+ source(2) is allowed if the corresponding instance of
+ optIfODUkDirectionality has the value bidirectional(3).
+
+ The value sink(1) means monitoring at the sink direction
+ path signal of the ODUk CTP.
+
+ The value source(2) means monitoring at the source direction
+ path signal of the ODUk CTP. Monitoring the source direction
+ of an ODUk CTP is necessary in those cases where the ODUk CTP
+ is at an SNCP (Subnetwork Connection Protection) end (e.g., see
+ Figure I.1.2/G.874.1). If one would like to get the performance
+ of the protected connection, one cannot use the NIM function
+ at both ODUk CTP sinks (before the matrix), instead one should
+ monitor the signal at the source ODUk CTP after the matrix."
+ ::= { optIfODUkNimConfigEntry 1 }
+
+optIfODUkNimDAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExDAPI
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The DAPI expected by the receiver.
+ This object has no effect if optIfODUkNimTIMDetMode has
+ the value off(1) or sapi(3)."
+ ::= { optIfODUkNimConfigEntry 2 }
+
+optIfODUkNimSAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExSAPI
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The SAPI expected by the receiver.
+ This object has no effect if optIfODUkNimTIMDetMode has
+ the value off(1) or dapi(2)."
+ ::= { optIfODUkNimConfigEntry 3 }
+
+optIfODUkNimTraceIdentifierAccepted OBJECT-TYPE
+ SYNTAX OptIfAcTI
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual trace identifier accepted. The value of
+ this object is unspecified if optIfODUkNimCurrentStatus
+ has any of the bit positions oci(0), lck(1), or ssf(5)
+ set or if optIfODUkNimRowStatus has any value other
+ than active(1)."
+ ::= { optIfODUkNimConfigEntry 4 }
+
+optIfODUkNimTIMDetMode OBJECT-TYPE
+ SYNTAX OptIfTIMDetMode
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of the Trace Identifier Mismatch (TIM)
+ Detection function."
+ ::= { optIfODUkNimConfigEntry 5 }
+
+optIfODUkNimTIMActEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the Trace Identifier Mismatch (TIM)
+ Consequent Action function is enabled."
+ ::= { optIfODUkNimConfigEntry 6 }
+
+optIfODUkNimDEGThr OBJECT-TYPE
+ SYNTAX OptIfDEGThr
+ UNITS "percentage"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a performance
+ monitoring (PM) Second to be bad. A PM Second is declared bad
+ if the percentage of detected errored blocks in that second is
+ greater than or equal to optIfODUkNimDEGThr."
+ ::= { optIfODUkNimConfigEntry 7 }
+
+optIfODUkNimDEGM OBJECT-TYPE
+ SYNTAX OptIfDEGM
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a Degraded Signal
+ defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM
+ consecutive bad PM Seconds are detected."
+ ::= { optIfODUkNimConfigEntry 8 }
+
+optIfODUkNimCurrentStatus OBJECT-TYPE
+ SYNTAX BITS {
+ oci(0),
+ lck(1),
+ tim(2),
+ deg(3),
+ bdi(4),
+ ssf(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the defect condition of the entity, if
+ any. The value of this object is unspecified if
+ optIfODUkNimRowStatus has any value other than
+ active(1)."
+ ::= { optIfODUkNimConfigEntry 9 }
+
+optIfODUkNimRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This columnar object is used for creating and deleting
+ a conceptual row of the optIfODUkNim config table.
+ It is used to model the activateNim and deactivateNim
+ operations of an OTUk_CTP for non-intrusive monitoring
+ control as defined in G.874.1. Setting RowStatus to
+ createAndGo or createAndWait implies activateNim.
+ Setting RowStatus to destroy implies deactivateNim."
+ ::= { optIfODUkNimConfigEntry 10 }
+
+-- GCC12 config table
+
+optIfGCC12ConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfGCC12ConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of GCC12 configuration information.
+ The GCC function processes the GCC overhead bytes passing
+ through them but leave the remainder of the ODUk overhead
+ and payload data alone."
+ ::= { optIfODUk 5 }
+
+optIfGCC12ConfigEntry OBJECT-TYPE
+ SYNTAX OptIfGCC12ConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains GCC12 configuration
+ information of an interface. Each instance must
+ correspond to an instance of optIfODUkConfigEntry.
+ Separate instances providing GCC1-only access and
+ GCC2-only access may exist for a given ifIndex value,
+ or a single instance providing GCC1 + GCC2 may exist,
+ but a GCC1 + GCC2 instance may not coexist with a
+ GCC1-only or GCC2-only instance.
+
+ Instances of this conceptual row persist across agent
+ restarts."
+ INDEX { ifIndex, optIfGCC12Codirectional, optIfGCC12GCCAccess }
+ ::= { optIfGCC12ConfigTable 1 }
+
+
+OptIfGCC12ConfigEntry ::=
+ SEQUENCE {
+ optIfGCC12Codirectional TruthValue,
+ optIfGCC12GCCAccess INTEGER,
+ optIfGCC12GCCPassThrough TruthValue,
+ optIfGCC12Application SnmpAdminString,
+ optIfGCC12RowStatus RowStatus
+ }
+
+optIfGCC12Codirectional OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the GCC12 termination with
+ respect to the associated ODUk CTP. The value true(1) means
+ that the sink part of the GCC12 extracts COMMS data from the
+ signal at the input to the ODUk CTP sink and the source part
+ of the GCC12 inserts COMMS data into the signal at the output
+ of the ODUk CTP source. The value false(2) means that the
+ sink part of the GCC12 extracts COMMS data from the signal at
+ the output of the ODUk CTP source and the source part of the
+ GCC12 inserts COMMS data into the signal at the input of the
+ ODUk CTP sink. This attribute may assume either value when
+ the corresponding instance of optIfODUkTtpPresent has the
+ value false(2). When the value of the corresponding instance
+ of optIfODUkTtpPresent is true(1) then the only value allowed
+ for this attribute is true(1)."
+ ::= { optIfGCC12ConfigEntry 1 }
+
+optIfGCC12GCCAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ gcc1 (1),
+ gcc2 (2),
+ gcc1and2 (3)
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the GCC access represented by the entity."
+ ::= { optIfGCC12ConfigEntry 2 }
+
+optIfGCC12GCCPassThrough OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Controls whether the selected GCC overhead bytes are passed
+ through or modified. The value true(1) means that the selected
+ GCC overhead bytes are passed through unmodified from the ODUk
+ CTP input to the ODUk CTP output. The value false(2) means that
+ the selected GCC overhead bytes are set to zero at the ODUk CTP
+ output after the extraction of the COMMS data. This object has
+ no effect if the corresponding instance of optIfODUkTtpPresent
+ has the value true(1).
+
+ The value of this object may not be changed when
+ optIfGCC12RowStatus has the value active(1)."
+ ::= { optIfGCC12ConfigEntry 3 }
+
+optIfGCC12Application OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the application transported by the GCC12 entity.
+ Example applications are ECC, User data channel.
+
+ The value of this object may not be changed when
+ optIfGCC12RowStatus has the value active(1)."
+ ::= { optIfGCC12ConfigEntry 4 }
+
+optIfGCC12RowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This columnar object is used for creating and deleting
+ a conceptual row of the optIfGCC12 config table. It is
+ used to model the addGCC12Access and removeGCC12Access
+ operations of an ODUk_CTP or ODUk_TTP for GCC12 access
+ control as defined in G.874.1. Setting RowStatus to
+ createAndGo or createAndWait implies addGCC12Access.
+ Setting RowStatus to destroy implies removeGCC12Access.
+ Successful addition/removal of the GCC12 access function
+ will result in updating the
+ optIfODUkPositionSeqCurrentSize variable and the
+ optIfODUkPositionSeqTable table of the associated
+ ODUk entry in the optIfODUkConfigTable."
+ ::= { optIfGCC12ConfigEntry 5 }
+
+-- the optIfODUkT group
+-- This group handles the configuration information
+-- for the ODUkT layers.
+
+-- ODUkT config table
+
+optIfODUkTConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfODUkTConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of ODUkT configuration information."
+ ::= { optIfODUkT 1 }
+
+optIfODUkTConfigEntry OBJECT-TYPE
+ SYNTAX OptIfODUkTConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains ODUkT configuration
+ information of an interface. Each instance must
+ correspond to an instance of optIfODUkConfigEntry.
+ Rows in this table are mutually exclusive with rows
+ in the ODUkT NIM config table -- in other words, this
+ row object may not be instantiated for a given pair
+ of ifIndex and TCM field values if a corresponding
+ instance of optIfODUkTNimConfigEntry already exists.
+
+ Instances of this conceptual row persist across agent
+ restarts. Except where noted otherwise, read-create
+ columns other than the status column may be modified
+ while the row is active."
+ INDEX { ifIndex, optIfODUkTTcmField, optIfODUkTCodirectional }
+ ::= { optIfODUkTConfigTable 1 }
+
+OptIfODUkTConfigEntry ::=
+ SEQUENCE {
+ optIfODUkTTcmField Unsigned32,
+ optIfODUkTCodirectional TruthValue,
+ optIfODUkTTraceIdentifierTransmitted OptIfTxTI,
+ optIfODUkTDAPIExpected OptIfExDAPI,
+ optIfODUkTSAPIExpected OptIfExSAPI,
+ optIfODUkTTraceIdentifierAccepted OptIfAcTI,
+ optIfODUkTTIMDetMode OptIfTIMDetMode,
+ optIfODUkTTIMActEnabled TruthValue,
+ optIfODUkTDEGThr OptIfDEGThr,
+ optIfODUkTDEGM OptIfDEGM,
+ optIfODUkTSinkMode INTEGER,
+ optIfODUkTSinkLockSignalAdminState INTEGER,
+ optIfODUkTSourceLockSignalAdminState INTEGER,
+ optIfODUkTCurrentStatus BITS,
+ optIfODUkTRowStatus RowStatus
+ }
+
+
+optIfODUkTTcmField OBJECT-TYPE
+ SYNTAX Unsigned32 (1..6)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the tandem connection monitoring
+ field of the ODUk OH. Valid values are
+ integers from 1 to 6."
+ ::= { optIfODUkTConfigEntry 1 }
+
+optIfODUkTCodirectional OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the directionality of the ODUkT termination point with
+ respect to the associated ODUk CTP. The value true(1) means
+ that the sink part of the ODUkT TP extracts TCM data from the
+ signal at the input to the ODUk CTP sink and the source part
+ of the ODUkT TP inserts TCM data into the signal at the output
+ of the ODUk CTP source. The value false(2) means that the
+ sink part of the ODUkT TP extracts TCM data from the signal at
+ the output of the ODUk CTP source and the source part of the
+ ODUkT TP inserts TCM data into the signal at the input of the
+ ODUk CTP sink. This attribute may assume either value when
+ the corresponding instance of optIfODUkTtpPresent has the
+ value false(2). When the value of the corresponding instance
+ of optIfODUkTtpPresent is true(1) then the only value allowed
+ for this attribute is true(1)."
+ ::= { optIfODUkTConfigEntry 2 }
+
+optIfODUkTTraceIdentifierTransmitted OBJECT-TYPE
+ SYNTAX OptIfTxTI
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The trace identifier transmitted.
+ This object is applicable only to the following three cases.
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value false(2), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value true(1).
+ It must not be instantiated in rows for all other cases."
+ ::= { optIfODUkTConfigEntry 3 }
+
+optIfODUkTDAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExDAPI
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The DAPI expected by the receiver.
+ This object is applicable only to the following three cases.
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases.
+ This object has no effect when optIfODUkTTIMDetMode has
+ the value off(1)."
+ ::= { optIfODUkTConfigEntry 4 }
+
+optIfODUkTSAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExSAPI
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The SAPI expected by the receiver.
+ This object is applicable only to the following three cases.
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases.
+ This object has no effect when optIfODUkTTIMDetMode has
+ the value off(1)."
+ ::= { optIfODUkTConfigEntry 5 }
+
+optIfODUkTTraceIdentifierAccepted OBJECT-TYPE
+ SYNTAX OptIfAcTI
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual trace identifier accepted.
+ This object is applicable only to the following three cases.
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases.
+ The value of this object is unspecified when
+ optIfODUkTCurrentStatus indicates a near-end defect
+ (i.e., oci(0), lck(1), ssf(5)) that prevents extraction
+ of the trace message."
+ ::= { optIfODUkTConfigEntry 6 }
+
+optIfODUkTTIMDetMode OBJECT-TYPE
+ SYNTAX OptIfTIMDetMode
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of the Trace Identifier Mismatch (TIM)
+ Detection function.
+ This object is applicable only to the following three cases.
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases.
+ The default value of this object is off(1)."
+ ::= { optIfODUkTConfigEntry 7 }
+
+optIfODUkTTIMActEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the Trace Identifier Mismatch (TIM)
+ Consequent Action function is enabled.
+ This object is applicable only to the following three cases.
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases.
+ This object has no effect when optIfODUkTTIMDetMode has
+ the value off(1).
+ The default value of this object is false(2)."
+ ::= { optIfODUkTConfigEntry 8 }
+
+optIfODUkTDEGThr OBJECT-TYPE
+ SYNTAX OptIfDEGThr
+ UNITS "percentage"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a performance
+ monitoring (PM) Second to be bad. A PM Second is declared bad if
+ the percentage of detected errored blocks in that second is
+ greater than or equal to optIfODUkTDEGThr.
+ This object is applicable only to the following three cases.
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases.
+ The default value of this object is Severely Errored Second
+ (SES) Estimator (See ITU-T G.7710)."
+ ::= { optIfODUkTConfigEntry 9 }
+
+optIfODUkTDEGM OBJECT-TYPE
+ SYNTAX OptIfDEGM
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a Degraded Signal
+ defect (dDEG). A dDEG shall be declared if optIfODUkTDEGM
+ consecutive bad PM Seconds are detected.
+ This object is applicable only to the following three cases.
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases.
+ The default value of this object is 7 (See ITU-T G.7710)."
+ ::= { optIfODUkTConfigEntry 10 }
+
+optIfODUkTSinkMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ operational (1),
+ monitor (2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable specifies the TCM mode at the entity.
+ The value operational(1) means that TCM Overhead (TCMOH)
+ processes (see ITU-T G.798) shall be
+ performed and consequent actions for AIS, Trail
+ Signal Fail (TSF), Trail Signal Degraded (TSD) shall be
+ initiated in case of defects.
+ The value monitor(2) means that TCMOH processes shall be
+ performed but consequent actions for AIS, Trail
+ Server Failure (TSF), Trail Server Degraded (TSD) shall _not_ be
+ initiated in case of defects.
+ This object is applicable only when the value of
+ optIfODUkTtpPresent is false(2) and also either one of the
+ following three cases holds:
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases."
+ ::= { optIfODUkTConfigEntry 11 }
+
+optIfODUkTSinkLockSignalAdminState OBJECT-TYPE
+ SYNTAX INTEGER {
+ locked(1),
+ normal(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Provides the capability to provision the LOCK signal, which
+ is one of the ODUk maintenance signals, at the ODUKT sink. When
+ a Tandem Connection endpoint is set to admin state locked,
+ it inserts the ODUk-LCK signal in the sink direction.
+
+ This object is applicable only when the value of
+ optIfODUkTtpPresent is false(2) and also either one of the
+ following three cases holds:
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases."
+ ::= { optIfODUkTConfigEntry 12 }
+
+optIfODUkTSourceLockSignalAdminState OBJECT-TYPE
+ SYNTAX INTEGER {
+ locked(1),
+ normal(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Provides the capability to provision the LOCK signal, which
+ is one of the ODUk maintenance signals, at the source.
+ When a Tandem Connection endpoint is set to admin state
+ locked, it inserts the ODUk-LCK signal in the source
+ direction.
+ This object is applicable only when either one of the
+ following three cases holds:
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value false(2), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value true(1).
+ It must not be instantiated in rows for all other cases."
+ ::= { optIfODUkTConfigEntry 13 }
+
+optIfODUkTCurrentStatus OBJECT-TYPE
+ SYNTAX BITS {
+ oci(0),
+ lck(1),
+ tim(2),
+ deg(3),
+ bdi(4),
+ ssf(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the defect condition of the entity, if any.
+ This object is applicable only when either one of the
+ following three cases holds:
+ (i) optIfODUkDirectionality has the value bidirectional(3), or
+ (ii) optIfODUkDirectionality has the value sink(1) and
+ optIfODUkTCodirectional has the value true(1), or
+ (iii) optIfODUkDirectionality has the value source(3) and
+ optIfODUkTCodirectional has the value false(2).
+ It must not be instantiated in rows for all other cases."
+ ::= { optIfODUkTConfigEntry 14 }
+
+optIfODUkTRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This columnar object is used for creating and deleting a
+ conceptual row of the optIfODUkT config table.
+ It is used to model the addTCM and removeTCM operations of an
+ ODUk_CTP or ODUk_TTP for Tandem connection monitoring as defined
+ in ITU-T G.874.1.
+ Setting RowStatus to createAndGo or createAndWait implies addTCM.
+ Setting RowStatus to destroy implies removeTCM.
+ Successful addition/removal of TCM will result in updating the
+ optIfODUkTcmFieldsInUse and optIfODUkPositionSeqCurrentSize
+ variables and the optIfODUkPositionSeqTable table of the
+ associated ODUk entry in the optIfODUkConfigTable."
+ ::= { optIfODUkTConfigEntry 15 }
+
+-- ODUkT Non-intrusive monitoring (Nim) config table
+
+optIfODUkTNimConfigTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF OptIfODUkTNimConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A table of ODUkTNim configuration information."
+ ::= { optIfODUkT 2 }
+
+optIfODUkTNimConfigEntry OBJECT-TYPE
+ SYNTAX OptIfODUkTNimConfigEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row that contains ODUkTNim configuration
+ information of an interface. Each instance must
+ correspond to an instance of optIfODUkConfigEntry.
+ Rows in this table are mutually exclusive with rows
+ in the ODUkT config table -- in other words, this
+ row object may not be instantiated for a given pair
+ of ifIndex and TCM field values if a corresponding
+ instance of optIfODUkTConfigEntry already exists.
+
+ Instances of this conceptual row persist across
+ agent restarts, and read-create columns other
+ than the status column may be modified while the
+ row is active."
+ INDEX {ifIndex, optIfODUkTNimTcmField, optIfODUkTNimDirectionality}
+ ::= { optIfODUkTNimConfigTable 1 }
+
+OptIfODUkTNimConfigEntry ::=
+ SEQUENCE {
+ optIfODUkTNimTcmField Unsigned32,
+ optIfODUkTNimDirectionality OptIfSinkOrSource,
+ optIfODUkTNimDAPIExpected OptIfExDAPI,
+ optIfODUkTNimSAPIExpected OptIfExSAPI,
+ optIfODUkTNimTraceIdentifierAccepted OptIfAcTI,
+ optIfODUkTNimTIMDetMode OptIfTIMDetMode,
+ optIfODUkTNimTIMActEnabled TruthValue,
+ optIfODUkTNimDEGThr OptIfDEGThr,
+ optIfODUkTNimDEGM OptIfDEGM,
+ optIfODUkTNimCurrentStatus BITS,
+ optIfODUkTNimRowStatus RowStatus
+ }
+
+optIfODUkTNimTcmField OBJECT-TYPE
+ SYNTAX Unsigned32 (1..6)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the tandem connection monitoring
+ field of the ODUk OH on which non-intrusive monitoring
+ is performed. Valid values are
+ integers from 1 to 6."
+ ::= { optIfODUkTNimConfigEntry 1 }
+
+optIfODUkTNimDirectionality OBJECT-TYPE
+ SYNTAX OptIfSinkOrSource
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the monitor point for the ODUk TCM non-intrusive
+ monitoring function. The value source(2) is not allowed
+ if the corresponding instance of optIfODUkDirectionality
+ has the value sink(1), and the value sink(1) is not allowed
+ if the corresponding instance of optIfODUkDirectionality
+ has the value source(2). Either the value sink(1) or
+ source(2) is allowed if the corresponding instance of
+ optIfODUkDirectionality has the value bidirectional(3).
+ The value sink(1) means monitoring at the sink direction
+ TCM signal of the ODUk CTP.
+ The value source(2) means monitoring at the source direction
+ path signal of the ODUk CTP."
+ ::= { optIfODUkTNimConfigEntry 2 }
+
+optIfODUkTNimDAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExDAPI
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The DAPI expected by the receiver.
+ This object has no effect if optIfODUkTNimTIMDetMode has
+ the value off(1) or sapi(3)."
+ ::= { optIfODUkTNimConfigEntry 3 }
+
+optIfODUkTNimSAPIExpected OBJECT-TYPE
+ SYNTAX OptIfExSAPI
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The SAPI expected by the receiver.
+ This object has no effect if optIfODUkTNimTIMDetMode has
+ the value off(1) or dapi(2)."
+
+ ::= { optIfODUkTNimConfigEntry 4 }
+
+optIfODUkTNimTraceIdentifierAccepted OBJECT-TYPE
+ SYNTAX OptIfAcTI
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual trace identifier accepted. The value of
+ this object is unspecified if optIfODUkTNimCurrentStatus
+ has any of the bit positions oci(0), lck(1), or ssf(5)
+ set or if optIfODUkTNimRowStatus has any value other
+ than active(1)."
+ ::= { optIfODUkTNimConfigEntry 5 }
+
+optIfODUkTNimTIMDetMode OBJECT-TYPE
+ SYNTAX OptIfTIMDetMode
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the mode of the Trace Identifier Mismatch (TIM)
+ Detection function."
+ ::= { optIfODUkTNimConfigEntry 6 }
+
+optIfODUkTNimTIMActEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates whether the Trace Identifier Mismatch (TIM)
+ Consequent Action function is enabled."
+ ::= { optIfODUkTNimConfigEntry 7 }
+
+optIfODUkTNimDEGThr OBJECT-TYPE
+ SYNTAX OptIfDEGThr
+ UNITS "percentage"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a performance
+ monitoring (PM) Second to be bad. A PM Second is declared bad if
+ the percentage of detected errored blocks in that second is
+ greater than or equal to optIfODUkTNimDEGThr."
+ ::= { optIfODUkTNimConfigEntry 8 }
+
+optIfODUkTNimDEGM OBJECT-TYPE
+ SYNTAX OptIfDEGM
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Indicates the threshold level for declaring a Degraded Signal
+ defect (dDEG). A dDEG shall be declared if optIfODUkTNimDEGM
+ consecutive bad PM Seconds are detected."
+ ::= { optIfODUkTNimConfigEntry 9 }
+
+optIfODUkTNimCurrentStatus OBJECT-TYPE
+ SYNTAX BITS {
+ oci(0),
+ lck(1),
+ tim(2),
+ deg(3),
+ bdi(4),
+ ssf(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the defect condition of the entity, if any.
+ The value of this object is unspecified if
+ optIfODUkTNimRowStatus has any value other than
+ active(1)."
+ ::= { optIfODUkTNimConfigEntry 10 }
+
+optIfODUkTNimRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This columnar object is used for creating and deleting a
+ conceptual row of the optIfODUkTNim config table.
+ It is used to model the addTCM and removeTCM operations of an
+ ODUk_CTP or ODUk_TTP for non-intrusive Tandem connection
+ monitoring as defined in ITU-T G.874.1.
+ Setting RowStatus to createAndGo or createAndWait implies addTCM.
+ Setting RowStatus to destroy implies removeTCM.
+ Successful addition/removal of Nim TCM will result in updating
+ the optIfODUkPositionSeqCurrentSize variable and the
+ optIfODUkPositionSeqTable table of the associated ODUk entry
+ in the optIfODUkConfigTable."
+ ::= { optIfODUkTNimConfigEntry 11 }
+
+-- units of conformance
+
+optIfOTMnGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTMnOrder,
+ optIfOTMnReduced,
+ optIfOTMnBitRates,
+ optIfOTMnInterfaceType,
+ optIfOTMnTcmMax,
+ optIfOTMnOpticalReach
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of OTMn structure information objects."
+ ::= { optIfGroups 1 }
+
+optIfPerfMonGroup OBJECT-GROUP
+ OBJECTS {
+ optIfPerfMonCurrentTimeElapsed,
+ optIfPerfMonCurDayTimeElapsed,
+ optIfPerfMonIntervalNumIntervals,
+ optIfPerfMonIntervalNumInvalidIntervals
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of performance monitoring interval objects."
+ ::= { optIfGroups 2 }
+
+optIfOTSnCommonGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnDirectionality
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all OTSn interfaces."
+ ::= { optIfGroups 3 }
+
+optIfOTSnSourceGroupFull OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnTraceIdentifierTransmitted
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to full-functionality/IaDI OTSn
+ interfaces that support source functions."
+ ::= { optIfGroups 4 }
+
+optIfOTSnAPRStatusGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnAprStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects applicable to
+ OTSn interfaces that support Automatic
+ Power Reduction functions."
+ ::= { optIfGroups 5 }
+
+optIfOTSnAPRControlGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnAprControl
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects applicable to
+ OTSn interfaces that provide Automatic
+ Power Reduction control functions."
+ ::= { optIfGroups 6 }
+
+optIfOTSnSinkGroupBasic OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnCurrentStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all OTSn interfaces that
+ support sink functions."
+ ::= { optIfGroups 7 }
+
+optIfOTSnSinkGroupFull OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnDAPIExpected,
+ optIfOTSnSAPIExpected,
+ optIfOTSnTraceIdentifierAccepted,
+ optIfOTSnTIMDetMode,
+ optIfOTSnTIMActEnabled
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to full-functionality/IaDI OTSn
+ interfaces that support sink functions."
+ ::= { optIfGroups 8 }
+
+optIfOTSnSinkPreOtnPMGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnSinkCurrentSuspectedFlag,
+ optIfOTSnSinkCurrentInputPower,
+ optIfOTSnSinkCurrentLowInputPower,
+ optIfOTSnSinkCurrentHighInputPower,
+ optIfOTSnSinkCurrentOutputPower,
+ optIfOTSnSinkCurrentLowOutputPower,
+ optIfOTSnSinkCurrentHighOutputPower,
+ optIfOTSnSinkIntervalSuspectedFlag,
+ optIfOTSnSinkIntervalLastInputPower,
+ optIfOTSnSinkIntervalLowInputPower,
+ optIfOTSnSinkIntervalHighInputPower,
+ optIfOTSnSinkIntervalLastOutputPower,
+ optIfOTSnSinkIntervalLowOutputPower,
+ optIfOTSnSinkIntervalHighOutputPower,
+ optIfOTSnSinkCurDaySuspectedFlag,
+ optIfOTSnSinkCurDayLowInputPower,
+ optIfOTSnSinkCurDayHighInputPower,
+ optIfOTSnSinkCurDayLowOutputPower,
+ optIfOTSnSinkCurDayHighOutputPower,
+ optIfOTSnSinkPrevDaySuspectedFlag,
+ optIfOTSnSinkPrevDayLastInputPower,
+ optIfOTSnSinkPrevDayLowInputPower,
+ optIfOTSnSinkPrevDayHighInputPower,
+ optIfOTSnSinkPrevDayLastOutputPower,
+ optIfOTSnSinkPrevDayLowOutputPower,
+ optIfOTSnSinkPrevDayHighOutputPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ objects applicable to OTSn interfaces that
+ support sink functions."
+ ::= { optIfGroups 9 }
+
+optIfOTSnSinkPreOtnPMThresholdGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnSinkCurrentLowerInputPowerThreshold,
+ optIfOTSnSinkCurrentUpperInputPowerThreshold,
+ optIfOTSnSinkCurrentLowerOutputPowerThreshold,
+ optIfOTSnSinkCurrentUpperOutputPowerThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ threshold objects applicable to OTSn interfaces
+ that support sink functions."
+ ::= { optIfGroups 10 }
+
+optIfOTSnSourcePreOtnPMGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnSrcCurrentSuspectedFlag,
+ optIfOTSnSrcCurrentOutputPower,
+ optIfOTSnSrcCurrentLowOutputPower,
+ optIfOTSnSrcCurrentHighOutputPower,
+ optIfOTSnSrcCurrentInputPower,
+ optIfOTSnSrcCurrentLowInputPower,
+ optIfOTSnSrcCurrentHighInputPower,
+ optIfOTSnSrcIntervalSuspectedFlag,
+ optIfOTSnSrcIntervalLastOutputPower,
+ optIfOTSnSrcIntervalLowOutputPower,
+ optIfOTSnSrcIntervalHighOutputPower,
+ optIfOTSnSrcIntervalLastInputPower,
+ optIfOTSnSrcIntervalLowInputPower,
+ optIfOTSnSrcIntervalHighInputPower,
+ optIfOTSnSrcCurDaySuspectedFlag,
+ optIfOTSnSrcCurDayLowOutputPower,
+ optIfOTSnSrcCurDayHighOutputPower,
+ optIfOTSnSrcCurDayLowInputPower,
+ optIfOTSnSrcCurDayHighInputPower,
+ optIfOTSnSrcPrevDaySuspectedFlag,
+ optIfOTSnSrcPrevDayLastOutputPower,
+ optIfOTSnSrcPrevDayLowOutputPower,
+ optIfOTSnSrcPrevDayHighOutputPower,
+ optIfOTSnSrcPrevDayLastInputPower,
+ optIfOTSnSrcPrevDayLowInputPower,
+ optIfOTSnSrcPrevDayHighInputPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ objects applicable to OTSn interfaces that
+ support source functions."
+ ::= { optIfGroups 11 }
+
+optIfOTSnSourcePreOtnPMThresholdGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTSnSrcCurrentLowerOutputPowerThreshold,
+ optIfOTSnSrcCurrentUpperOutputPowerThreshold,
+ optIfOTSnSrcCurrentLowerInputPowerThreshold,
+ optIfOTSnSrcCurrentUpperInputPowerThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ threshold objects applicable to OTSn interfaces
+ that support source functions."
+ ::= { optIfGroups 12 }
+
+optIfOMSnCommonGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOMSnDirectionality
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all OMSn interfaces."
+ ::= { optIfGroups 13 }
+
+optIfOMSnSinkGroupBasic OBJECT-GROUP
+ OBJECTS {
+ optIfOMSnCurrentStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all OMSn interfaces that
+ support sink functions."
+ ::= { optIfGroups 14 }
+
+optIfOMSnSinkPreOtnPMGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOMSnSinkCurrentSuspectedFlag,
+ optIfOMSnSinkCurrentAggregatedInputPower,
+ optIfOMSnSinkCurrentLowAggregatedInputPower,
+ optIfOMSnSinkCurrentHighAggregatedInputPower,
+ optIfOMSnSinkCurrentOutputPower,
+ optIfOMSnSinkCurrentLowOutputPower,
+ optIfOMSnSinkCurrentHighOutputPower,
+ optIfOMSnSinkIntervalSuspectedFlag,
+ optIfOMSnSinkIntervalLastAggregatedInputPower,
+ optIfOMSnSinkIntervalLowAggregatedInputPower,
+ optIfOMSnSinkIntervalHighAggregatedInputPower,
+ optIfOMSnSinkIntervalLastOutputPower,
+ optIfOMSnSinkIntervalLowOutputPower,
+ optIfOMSnSinkIntervalHighOutputPower,
+ optIfOMSnSinkCurDaySuspectedFlag,
+ optIfOMSnSinkCurDayLowAggregatedInputPower,
+ optIfOMSnSinkCurDayHighAggregatedInputPower,
+ optIfOMSnSinkCurDayLowOutputPower,
+ optIfOMSnSinkCurDayHighOutputPower,
+ optIfOMSnSinkPrevDaySuspectedFlag,
+ optIfOMSnSinkPrevDayLastAggregatedInputPower,
+ optIfOMSnSinkPrevDayLowAggregatedInputPower,
+ optIfOMSnSinkPrevDayHighAggregatedInputPower,
+ optIfOMSnSinkPrevDayLastOutputPower,
+ optIfOMSnSinkPrevDayLowOutputPower,
+ optIfOMSnSinkPrevDayHighOutputPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ objects applicable to OMSn interfaces that
+ support sink functions."
+ ::= { optIfGroups 15 }
+
+optIfOMSnSinkPreOtnPMThresholdGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOMSnSinkCurrentLowerInputPowerThreshold,
+ optIfOMSnSinkCurrentUpperInputPowerThreshold,
+ optIfOMSnSinkCurrentLowerOutputPowerThreshold,
+ optIfOMSnSinkCurrentUpperOutputPowerThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ threshold objects applicable to OMSn interfaces
+ that support sink functions."
+ ::= { optIfGroups 16 }
+
+optIfOMSnSourcePreOtnPMGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOMSnSrcCurrentSuspectedFlag,
+ optIfOMSnSrcCurrentOutputPower,
+ optIfOMSnSrcCurrentLowOutputPower,
+ optIfOMSnSrcCurrentHighOutputPower,
+ optIfOMSnSrcCurrentAggregatedInputPower,
+ optIfOMSnSrcCurrentLowAggregatedInputPower,
+ optIfOMSnSrcCurrentHighAggregatedInputPower,
+ optIfOMSnSrcIntervalSuspectedFlag,
+ optIfOMSnSrcIntervalLastOutputPower,
+ optIfOMSnSrcIntervalLowOutputPower,
+ optIfOMSnSrcIntervalHighOutputPower,
+ optIfOMSnSrcIntervalLastAggregatedInputPower,
+ optIfOMSnSrcIntervalLowAggregatedInputPower,
+ optIfOMSnSrcIntervalHighAggregatedInputPower,
+ optIfOMSnSrcCurDaySuspectedFlag,
+ optIfOMSnSrcCurDayLowOutputPower,
+ optIfOMSnSrcCurDayHighOutputPower,
+ optIfOMSnSrcCurDayLowAggregatedInputPower,
+ optIfOMSnSrcCurDayHighAggregatedInputPower,
+ optIfOMSnSrcPrevDaySuspectedFlag,
+ optIfOMSnSrcPrevDayLastOutputPower,
+ optIfOMSnSrcPrevDayLowOutputPower,
+ optIfOMSnSrcPrevDayHighOutputPower,
+ optIfOMSnSrcPrevDayLastAggregatedInputPower,
+ optIfOMSnSrcPrevDayLowAggregatedInputPower,
+ optIfOMSnSrcPrevDayHighAggregatedInputPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ objects applicable to OMSn interfaces that
+ support source functions."
+ ::= { optIfGroups 17 }
+
+optIfOMSnSourcePreOtnPMThresholdGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOMSnSrcCurrentLowerOutputPowerThreshold,
+ optIfOMSnSrcCurrentUpperOutputPowerThreshold,
+ optIfOMSnSrcCurrentLowerInputPowerThreshold,
+ optIfOMSnSrcCurrentUpperInputPowerThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ threshold objects applicable to OMSn interfaces that
+ that support source functions."
+ ::= { optIfGroups 18 }
+
+optIfOChGroupCommonGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChGroupDirectionality
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all OChGroup interfaces."
+ ::= { optIfGroups 19 }
+
+optIfOChGroupSinkPreOtnPMGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChGroupSinkCurrentSuspectedFlag,
+ optIfOChGroupSinkCurrentAggregatedInputPower,
+ optIfOChGroupSinkCurrentLowAggregatedInputPower,
+ optIfOChGroupSinkCurrentHighAggregatedInputPower,
+ optIfOChGroupSinkCurrentOutputPower,
+ optIfOChGroupSinkCurrentLowOutputPower,
+ optIfOChGroupSinkCurrentHighOutputPower,
+ optIfOChGroupSinkIntervalSuspectedFlag,
+ optIfOChGroupSinkIntervalLastAggregatedInputPower,
+ optIfOChGroupSinkIntervalLowAggregatedInputPower,
+ optIfOChGroupSinkIntervalHighAggregatedInputPower,
+ optIfOChGroupSinkIntervalLastOutputPower,
+ optIfOChGroupSinkIntervalLowOutputPower,
+ optIfOChGroupSinkIntervalHighOutputPower,
+ optIfOChGroupSinkCurDaySuspectedFlag,
+ optIfOChGroupSinkCurDayLowAggregatedInputPower,
+ optIfOChGroupSinkCurDayHighAggregatedInputPower,
+ optIfOChGroupSinkCurDayLowOutputPower,
+ optIfOChGroupSinkCurDayHighOutputPower,
+ optIfOChGroupSinkPrevDaySuspectedFlag,
+ optIfOChGroupSinkPrevDayLastAggregatedInputPower,
+ optIfOChGroupSinkPrevDayLowAggregatedInputPower,
+ optIfOChGroupSinkPrevDayHighAggregatedInputPower,
+ optIfOChGroupSinkPrevDayLastOutputPower,
+ optIfOChGroupSinkPrevDayLowOutputPower,
+ optIfOChGroupSinkPrevDayHighOutputPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ objects applicable to OChGroup interfaces that
+ support sink functions."
+ ::= { optIfGroups 20 }
+
+optIfOChGroupSinkPreOtnPMThresholdGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChGroupSinkCurrentLowerInputPowerThreshold,
+ optIfOChGroupSinkCurrentUpperInputPowerThreshold,
+ optIfOChGroupSinkCurrentLowerOutputPowerThreshold,
+ optIfOChGroupSinkCurrentUpperOutputPowerThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ threshold objects applicable to OChGroup interfaces
+ that support sink functions."
+ ::= { optIfGroups 21 }
+
+optIfOChGroupSourcePreOtnPMGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChGroupSrcCurrentSuspectedFlag,
+ optIfOChGroupSrcCurrentOutputPower,
+ optIfOChGroupSrcCurrentLowOutputPower,
+ optIfOChGroupSrcCurrentHighOutputPower,
+ optIfOChGroupSrcCurrentAggregatedInputPower,
+ optIfOChGroupSrcCurrentLowAggregatedInputPower,
+ optIfOChGroupSrcCurrentHighAggregatedInputPower,
+ optIfOChGroupSrcIntervalSuspectedFlag,
+ optIfOChGroupSrcIntervalLastOutputPower,
+ optIfOChGroupSrcIntervalLowOutputPower,
+ optIfOChGroupSrcIntervalHighOutputPower,
+ optIfOChGroupSrcIntervalLastAggregatedInputPower,
+ optIfOChGroupSrcIntervalLowAggregatedInputPower,
+ optIfOChGroupSrcIntervalHighAggregatedInputPower,
+ optIfOChGroupSrcCurDaySuspectedFlag,
+ optIfOChGroupSrcCurDayLowOutputPower,
+ optIfOChGroupSrcCurDayHighOutputPower,
+ optIfOChGroupSrcCurDayLowAggregatedInputPower,
+ optIfOChGroupSrcCurDayHighAggregatedInputPower,
+ optIfOChGroupSrcPrevDaySuspectedFlag,
+ optIfOChGroupSrcPrevDayLastOutputPower,
+ optIfOChGroupSrcPrevDayLowOutputPower,
+ optIfOChGroupSrcPrevDayHighOutputPower,
+ optIfOChGroupSrcPrevDayLastAggregatedInputPower,
+ optIfOChGroupSrcPrevDayLowAggregatedInputPower,
+ optIfOChGroupSrcPrevDayHighAggregatedInputPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ objects applicable to OChGroup interfaces that
+ support source functions."
+ ::= { optIfGroups 22 }
+
+optIfOChGroupSourcePreOtnPMThresholdGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChGroupSrcCurrentLowerOutputPowerThreshold,
+ optIfOChGroupSrcCurrentUpperOutputPowerThreshold,
+ optIfOChGroupSrcCurrentLowerInputPowerThreshold,
+ optIfOChGroupSrcCurrentUpperInputPowerThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ threshold objects applicable to OChGroup interfaces that
+ that support source functions."
+ ::= { optIfGroups 23 }
+
+optIfOChCommonGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChDirectionality
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all OCh interfaces."
+ ::= { optIfGroups 24 }
+
+optIfOChSinkGroupBasic OBJECT-GROUP
+ OBJECTS {
+ optIfOChCurrentStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all OCh interfaces that
+ support sink functions."
+ ::= { optIfGroups 25 }
+
+optIfOChSinkPreOtnPMGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChSinkCurrentSuspectedFlag,
+ optIfOChSinkCurrentInputPower,
+ optIfOChSinkCurrentLowInputPower,
+ optIfOChSinkCurrentHighInputPower,
+ optIfOChSinkIntervalSuspectedFlag,
+ optIfOChSinkIntervalLastInputPower,
+ optIfOChSinkIntervalLowInputPower,
+ optIfOChSinkIntervalHighInputPower,
+ optIfOChSinkCurDaySuspectedFlag,
+ optIfOChSinkCurDayLowInputPower,
+ optIfOChSinkCurDayHighInputPower,
+ optIfOChSinkPrevDaySuspectedFlag,
+ optIfOChSinkPrevDayLastInputPower,
+ optIfOChSinkPrevDayLowInputPower,
+ optIfOChSinkPrevDayHighInputPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ objects applicable to OCh interfaces that
+ support sink functions."
+ ::= { optIfGroups 26 }
+
+optIfOChSinkPreOtnPMThresholdGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChSinkCurrentLowerInputPowerThreshold,
+ optIfOChSinkCurrentUpperInputPowerThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ threshold objects applicable to OCh interfaces
+ that support sink functions."
+ ::= { optIfGroups 27 }
+
+
+optIfOChSourcePreOtnPMGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChSrcCurrentSuspectedFlag,
+ optIfOChSrcCurrentOutputPower,
+ optIfOChSrcCurrentLowOutputPower,
+ optIfOChSrcCurrentHighOutputPower,
+ optIfOChSrcIntervalSuspectedFlag,
+ optIfOChSrcIntervalLastOutputPower,
+ optIfOChSrcIntervalLowOutputPower,
+ optIfOChSrcIntervalHighOutputPower,
+ optIfOChSrcCurDaySuspectedFlag,
+ optIfOChSrcCurDayLowOutputPower,
+ optIfOChSrcCurDayHighOutputPower,
+ optIfOChSrcPrevDaySuspectedFlag,
+ optIfOChSrcPrevDayLastOutputPower,
+ optIfOChSrcPrevDayLowOutputPower,
+ optIfOChSrcPrevDayHighOutputPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ objects applicable to OCh interfaces that
+ support source functions."
+ ::= { optIfGroups 28 }
+
+optIfOChSourcePreOtnPMThresholdGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOChSrcCurrentLowerOutputPowerThreshold,
+ optIfOChSrcCurrentUpperOutputPowerThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of pre-OTN performance monitoring
+ threshold objects applicable to OCh interfaces
+ that support source functions."
+ ::= { optIfGroups 29 }
+
+optIfOTUkCommonGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTUkDirectionality,
+ optIfOTUkBitRateK
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all OTUk interfaces."
+ ::= { optIfGroups 30 }
+
+optIfOTUkSourceGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTUkTraceIdentifierTransmitted,
+ optIfOTUkSourceAdaptActive
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to OTUk interfaces that
+ support source functions."
+ ::= { optIfGroups 31 }
+
+optIfOTUkSinkGroup OBJECT-GROUP
+ OBJECTS {
+ optIfOTUkDAPIExpected,
+ optIfOTUkSAPIExpected,
+ optIfOTUkTraceIdentifierAccepted,
+ optIfOTUkTIMDetMode,
+ optIfOTUkTIMActEnabled,
+ optIfOTUkDEGThr,
+ optIfOTUkDEGM,
+ optIfOTUkSinkAdaptActive,
+ optIfOTUkSinkFECEnabled,
+ optIfOTUkCurrentStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to OTUk interfaces that
+ support sink functions."
+ ::= { optIfGroups 32 }
+
+optIfGCC0Group OBJECT-GROUP
+ OBJECTS {
+ optIfGCC0Application,
+ optIfGCC0RowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of GCC0 configuration objects."
+ ::= { optIfGroups 33 }
+
+optIfODUkGroup OBJECT-GROUP
+ OBJECTS {
+ optIfODUkDirectionality,
+ optIfODUkBitRateK,
+ optIfODUkTcmFieldsInUse,
+ optIfODUkPositionSeqCurrentSize,
+ optIfODUkPositionSeqPosition,
+ optIfODUkPositionSeqPointer,
+ optIfODUkTtpPresent
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all ODUk interfaces."
+ ::= { optIfGroups 34 }
+
+optIfODUkTtpSourceGroup OBJECT-GROUP
+ OBJECTS {
+ optIfODUkTtpTraceIdentifierTransmitted
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all interfaces that support
+ ODUk trail termination source functions."
+ ::= { optIfGroups 35 }
+
+optIfODUkTtpSinkGroup OBJECT-GROUP
+ OBJECTS {
+ optIfODUkTtpDAPIExpected,
+ optIfODUkTtpSAPIExpected,
+ optIfODUkTtpTraceIdentifierAccepted,
+ optIfODUkTtpTIMDetMode,
+ optIfODUkTtpTIMActEnabled,
+ optIfODUkTtpDEGThr,
+ optIfODUkTtpDEGM,
+ optIfODUkTtpCurrentStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of ODUk configuration objects
+ applicable to all interfaces that support
+ ODUk trail termination sink functions."
+ ::= { optIfGroups 36 }
+
+optIfODUkNimGroup OBJECT-GROUP
+ OBJECTS {
+ optIfODUkNimDAPIExpected,
+ optIfODUkNimSAPIExpected,
+ optIfODUkNimTraceIdentifierAccepted,
+ optIfODUkNimTIMDetMode,
+ optIfODUkNimTIMActEnabled,
+ optIfODUkNimDEGThr,
+ optIfODUkNimDEGM,
+ optIfODUkNimCurrentStatus,
+ optIfODUkNimRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of ODUk Nim configuration objects."
+ ::= { optIfGroups 37 }
+
+optIfGCC12Group OBJECT-GROUP
+ OBJECTS {
+ optIfGCC12GCCPassThrough,
+ optIfGCC12Application,
+ optIfGCC12RowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of GCC12 configuration objects."
+ ::= { optIfGroups 38 }
+
+optIfODUkTCommonGroup OBJECT-GROUP
+ OBJECTS {
+ optIfODUkTRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all ODUkT instances."
+ ::= { optIfGroups 39 }
+
+optIfODUkTSourceGroup OBJECT-GROUP
+ OBJECTS {
+ optIfODUkTTraceIdentifierTransmitted,
+ optIfODUkTSourceLockSignalAdminState
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all ODUkT instances
+ that provide source functions."
+ ::= { optIfGroups 40 }
+
+optIfODUkTSinkGroup OBJECT-GROUP
+ OBJECTS {
+ optIfODUkTDAPIExpected,
+ optIfODUkTSAPIExpected,
+ optIfODUkTTraceIdentifierAccepted,
+ optIfODUkTTIMDetMode,
+ optIfODUkTTIMActEnabled,
+ optIfODUkTDEGThr,
+ optIfODUkTDEGM,
+ optIfODUkTCurrentStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to all ODUkT instances
+ that provide sink functions."
+ ::= { optIfGroups 41 }
+
+optIfODUkTSinkGroupCtp OBJECT-GROUP
+ OBJECTS {
+ optIfODUkTSinkMode,
+ optIfODUkTSinkLockSignalAdminState
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of configuration objects
+ applicable to ODUkT instances not
+ colocated with an ODUk TTP that
+ provide sink functions."
+ ::= { optIfGroups 42 }
+
+optIfODUkTNimGroup OBJECT-GROUP
+ OBJECTS {
+ optIfODUkTNimDAPIExpected,
+ optIfODUkTNimSAPIExpected,
+ optIfODUkTNimTraceIdentifierAccepted,
+ optIfODUkTNimTIMDetMode,
+ optIfODUkTNimTIMActEnabled,
+ optIfODUkTNimDEGThr,
+ optIfODUkTNimDEGM,
+ optIfODUkTNimCurrentStatus,
+ optIfODUkTNimRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of ODUkT Nim configuration objects."
+ ::= { optIfGroups 43 }
+
+
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 16:32:40 +0000