Initial commitHEADmain

1 files changed, 1110 insertions, 0 deletions

diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB
new file mode 100644
index 0000000..36b3806
--- /dev/null
+++ b/MIBS/nokia/aos7/ALCATEL-IND1-E-SERVICE-MIB
@@ -0,0 +1,1110 @@
+
+ALCATEL-IND1-E-SERVICE-MIB DEFINITIONS ::= BEGIN
+
+        IMPORTS
+                MODULE-IDENTITY,
+                OBJECT-IDENTITY,
+                OBJECT-TYPE,
+                Integer32                       FROM SNMPv2-SMI
+                OBJECT-GROUP,
+                MODULE-COMPLIANCE               FROM SNMPv2-CONF
+                softentIND1eService             FROM ALCATEL-IND1-BASE
+                RowStatus,
+                TEXTUAL-CONVENTION              FROM SNMPv2-TC
+                SnmpAdminString                 FROM SNMP-FRAMEWORK-MIB
+                InterfaceIndex                  FROM IF-MIB
+                ;
+
+        alcatelIND1EServiceMIB MODULE-IDENTITY
+                LAST-UPDATED "200705230000Z"
+                ORGANIZATION "Alcatel-Lucent"
+                CONTACT-INFO
+                "Please consult with Customer Service to ensure the most appropriate
+                version of this document is used with the products in question:
+
+                                                   Alcatel-Lucent, Enterprise Solutions Division
+                                            (Formerly Alcatel Internetworking, Incorporated)
+                                                         26801 West Agoura Road
+                                                       Agoura Hills, CA  91301-5122
+                                                        United States Of America
+
+                Telephone:          North America       +1 800 995 2696
+                                                        Latin America   +1 877 919 9526
+                                Europe          +31 23 556 0100
+                                Asia            +65 394 7933
+                                All Other       +1 818 878 4507
+
+                Electronic Mail:        support@ind.alcatel.com
+                World Wide Web:         http://alcatel-lucent.com/wps/portal/enterprise
+                File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
+                DESCRIPTION
+                "The parameters for configuration of the E-Service feature.
+
+                The right to make changes in specification and other information
+                contained in this document without prior notice is reserved.
+
+                No liability shall be assumed for any incidental, indirect, special, or
+                consequential damages whatsoever arising from or related to this
+                document or the information contained herein.
+
+                Vendors, end-users, and other interested parties are granted
+                non-exclusive license to use this specification in connection with
+                management of the products for which it is intended to be used.
+
+                               Copyright (C) 1995-2006 Alcatel-Lucent
+                                         ALL RIGHTS RESERVED WORLDWIDE"
+                ::= { softentIND1eService 1}
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+-- Textual Conventions
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+AlaEServiceUNIProfileProtocolTreatment ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The behavior of the bridge in regards to the given protocols packets received on
+        the UNI. Tunnel (1) enables the packets to be tunneled across the provider
+        network.  Discard (2) causes the packets to be discarded and not enter
+        the provider network. Peer (3) means that on this port the bridge is to
+        participate in the protocol."
+        SYNTAX   INTEGER
+        {
+                tunnel (1),
+                drop (2),
+                peer (3)
+        }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alcatelIND1eServiceMIBObjects OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Branch For E-Service Managed Objects."
+        ::= { alcatelIND1EServiceMIB 1 }
+
+alcatelIND1EServiceMIBConformance OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Branch For E-Service Conformance Information."
+        ::= { alcatelIND1EServiceMIB 2 }
+
+alcatelIND1EServiceMIBGroups OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Branch For E-Service Units Of Conformance."
+        ::= { alcatelIND1EServiceMIBConformance 1 }
+
+alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Branch For E-Service Compliance Statements."
+         ::= { alcatelIND1EServiceMIBConformance 2 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--  The E-Service Group
+
+     alaEService OBJECT IDENTIFIER ::= { alcatelIND1eServiceMIBObjects 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+alaEServiceInfo OBJECT IDENTIFIER ::= { alaEService 1 }
+
+
+alaEServiceMode  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                legacyMode (1),
+                eServiceMode (2)
+        }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "The current mode configured for Vlan Stacking and Layer 2 tunnel configuration.
+        legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are
+        to be used. eServiceMode (2) indicates the commands from this MIB are to be used."
+        DEFVAL { legacyMode }
+        ::= { alaEServiceInfo 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--   The E-Service SAP Profile Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceSapProfileTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF  AlaEServiceSapProfileEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A table that contains service profiles containing performance and control attributes.
+        An entry in this table is created when a new service profile is defined."
+        ::= { alaEService 2 }
+
+alaEServiceSapProfileEntry  OBJECT-TYPE
+        SYNTAX  AlaEServiceSapProfileEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A E-Service Service Profile entry."
+        INDEX   { IMPLIED alaEServiceSapProfileID }
+        ::= { alaEServiceSapProfileTable 1 }
+
+AlaEServiceSapProfileEntry ::= SEQUENCE
+        {
+                alaEServiceSapProfileID                         SnmpAdminString,
+                alaEServiceSapProfileCVLANTreatment             INTEGER,
+                alaEServiceSapProfileReplacementCVLAN           Integer32,
+                alaEServiceSapProfilePriorityMapMode            INTEGER,
+                alaEServiceSapProfileFixedPriority              Integer32,
+                alaEServiceSapProfileIngressBW                  Integer32,
+                alaEServiceSapProfileBandwidthShare             INTEGER,
+                alaEServiceSapProfileRowStatus                  RowStatus,
+                alaEServiceSapProfileEgressBW                   Integer32
+        }
+
+alaEServiceSapProfileID OBJECT-TYPE
+        SYNTAX  SnmpAdminString (SIZE (1..31))
+        MAX-ACCESS not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A label given to uniquely identify this profile. Must be at least one character long."
+        ::= { alaEServiceSapProfileEntry 1 }
+
+alaEServiceSapProfileCVLANTreatment  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                stackSVLAN (1),
+                translate (2),
+                changeCVLAN (3)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The type of VLAN stacking operation to be performed on a customer frame entering
+        this service.  Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the
+        frame before any existing 802.1Q tag.  Translate (2) means to replace the existing
+        802.1Q tag with the SVLAN.  Change CVLAN (3) indicates that the customer tag is to
+        remain on the frame but its value is to be changed to the supplied value."
+        DEFVAL { stackSVLAN }
+        ::= { alaEServiceSapProfileEntry 2 }
+
+alaEServiceSapProfileReplacementCVLAN  OBJECT-TYPE
+        SYNTAX  Integer32 (1..4094)
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The CVLAN ID to use when using the Change CVLAN treatment mode."
+        ::= { alaEServiceSapProfileEntry 3 }
+
+alaEServiceSapProfilePriorityMapMode  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+		notAssigned (0),
+                mapInnerPtoOuterP (1),
+                mapInnerDscpToOuterP(2),
+                fixedP (3)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the source of the value for the priority field of the SVLAN
+        802.1Q tag when pre-pended to the customer data frame.NotAssigned(0), MapInnerPtoOuterP (1) uses
+        the priority field of the incoming frame when tagged to fill in the priority field
+        of the SVLAN tag. mapInnerDscpToOuterP (2) uses the frames priority bits in its IP
+        DSCP field to fill in the priority field of the SVLAN tag. FixedP (3) uses the
+        supplied FixedPriorityValue to fill in the SVLAN tag priority bits."
+        DEFVAL { fixedP }
+        ::= { alaEServiceSapProfileEntry 4 }
+
+alaEServiceSapProfileFixedPriority  OBJECT-TYPE
+        SYNTAX  Integer32 (0..7)
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the value of the priority field of the 802.1Q SVLAN tag
+        pre-pended to customer data frames when the fixed priority mapping mode is selected."
+        DEFVAL { 0 }
+        ::= { alaEServiceSapProfileEntry 5 }
+
+alaEServiceSapProfileIngressBW  OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes this limit of ingress bandwidth for the traffic to which
+        this profile is applied. If 0, no bandwidth limit is applied.  This number represents
+        traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this
+        SAP will share this aggregated limit."
+        ::= { alaEServiceSapProfileEntry 6 }
+
+alaEServiceSapProfileBandwidthShare  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                notApplicable(0),
+                shared (1),
+                notShared(2)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the use of the bandwidth limit in how it is applied across
+        multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set
+        to Shared (1), all the ports that are part of the SAP will use aggregated
+        bandwidth, sharing some part of the bandwidth limit. If set to notShared (2),
+        each port will use its own bandwidth meter for this SAP. This value is not used
+        if ingressBandwidth is 0."
+        DEFVAL { shared }
+        ::= { alaEServiceSapProfileEntry 7 }
+
+alaEServiceSapProfileRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The status of this table entry."
+        ::= { alaEServiceSapProfileEntry 8 }
+
+alaEServiceSapProfileEgressBW  OBJECT-TYPE
+        SYNTAX  Integer32
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes this limit of egress bandwidth for each UNI
+        of the SAP to which this profile is applied. If 0, no bandwidth limit
+        is applied.  This number represents traffic in units of Megabits per
+        second. Note that all CVLAN that belong to this SAP will share this
+        aggregated limit."
+        DEFVAL { 0 }
+        ::= { alaEServiceSapProfileEntry 9 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--   The E-Service UNI Profile Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceUNIProfileTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF  AlaEServiceUNIProfileEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A table that contains service profiles containing performance and control attributes.
+        An entry in this table is created when a new service profile is defined."
+        ::= { alaEService 3 }
+
+alaEServiceUNIProfileEntry  OBJECT-TYPE
+        SYNTAX  AlaEServiceUNIProfileEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A E-Service Service Profile entry."
+        INDEX   { IMPLIED alaEServiceUNIProfileID }
+        ::= { alaEServiceUNIProfileTable 1 }
+
+AlaEServiceUNIProfileEntry ::= SEQUENCE
+        {
+                alaEServiceUNIProfileID                         SnmpAdminString,
+                alaEServiceUNIProfileStpBpduTreatment           AlaEServiceUNIProfileProtocolTreatment,
+                alaEServiceUNIProfile8021xTreatment             AlaEServiceUNIProfileProtocolTreatment,
+                alaEServiceUNIProfile8021ABTreatment            AlaEServiceUNIProfileProtocolTreatment,
+                alaEServiceUNIProfile8023adTreatment            AlaEServiceUNIProfileProtocolTreatment,
+                alaEServiceUNIProfileGvrpTreatment              AlaEServiceUNIProfileProtocolTreatment,
+                alaEServiceUNIProfileAmapTreatment              AlaEServiceUNIProfileProtocolTreatment,
+                alaEServiceUNIProfileMvrpTreatment              AlaEServiceUNIProfileProtocolTreatment,
+                alaEServiceUNIProfileRowStatus                  RowStatus
+        }
+
+alaEServiceUNIProfileID OBJECT-TYPE
+        SYNTAX  SnmpAdminString (SIZE (1..31))
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A label given to uniquely identify this profile. Must be at least one character long."
+        ::= { alaEServiceUNIProfileEntry 1 }
+
+alaEServiceUNIProfileStpBpduTreatment  OBJECT-TYPE
+        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the behavior of the bridge in regards to the spanning tree
+        protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+        the provider network.  Discard (2) causes the PDU of the protocol to be discarded
+        and not enter the provider network. Peer (3) means that on this port the bridge
+        is to participate in the protocol.  Currnetly Peer is not supported for Spanning Tree"
+        DEFVAL { tunnel }
+        ::= { alaEServiceUNIProfileEntry 2 }
+
+alaEServiceUNIProfile8021xTreatment  OBJECT-TYPE
+        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU
+        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+        the provider network.  Discard (2) causes the PDU of the protocol to be discarded
+        and not enter the provider network. Peer (3) means that on this port the bridge
+        is to participate in the protocol.  Currnetly only drop is supported"
+        DEFVAL { drop }
+        ::= { alaEServiceUNIProfileEntry 3 }
+
+alaEServiceUNIProfile8021ABTreatment  OBJECT-TYPE
+        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
+        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+        the provider network.  Discard (2) causes the PDU of the protocol to be discarded
+        and not enter the provider network. Peer (3) means that on this port the bridge
+        is to participate in the protocol.  Currently only drop is supported"
+        DEFVAL { drop }
+        ::= { alaEServiceUNIProfileEntry 4 }
+
+alaEServiceUNIProfile8023adTreatment  OBJECT-TYPE
+        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU
+        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+        the provider network.  Discard (2) causes the PDU of the protocol to be discarded
+        and not enter the provider network. Peer (3) means that on this port the bridge
+        is to participate in the protocol.  Currently only peer is supported"
+        DEFVAL { peer }
+        ::= { alaEServiceUNIProfileEntry 5 }
+
+alaEServiceUNIProfileGvrpTreatment  OBJECT-TYPE
+        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
+        MAX-ACCESS  read-create
+        STATUS deprecated 
+        DESCRIPTION
+        "This object describes the behavior of the bridge in regards to the GVRP PDU
+        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+        the provider network.  Discard (2) causes the PDU of the protocol to be discarded
+        and not enter the provider network. Peer (3) means that on this port the bridge
+        is to participate in the protocol.  Currently peer is not supported for GVRP"
+        DEFVAL { tunnel }
+        ::= { alaEServiceUNIProfileEntry 6 }
+
+alaEServiceUNIProfileAmapTreatment  OBJECT-TYPE
+        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the behavior of the bridge in regards to the Alcatel
+        propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to
+        be tunneled across the provider network.  Discard (2) causes the PDU of the
+        protocol to be discarded and not enter the provider network. Peer (3) means
+        that on this port the bridge is to participate in the protocol.  Currently
+        drop is only supported"
+        DEFVAL { drop }
+        ::= { alaEServiceUNIProfileEntry 7 }
+
+alaEServiceUNIProfileMvrpTreatment  OBJECT-TYPE
+        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object describes the behavior of the bridge in regards to the MVRP PDU
+        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
+        the provider network.  Discard (2) causes the PDU of the protocol to be discarded
+        and not enter the provider network. Peer (3) means that on this port the bridge
+        is to participate in the protocol.  Currently peer is not supported for MVRP"
+        DEFVAL { tunnel }
+        ::= { alaEServiceUNIProfileEntry 8 }
+
+alaEServiceUNIProfileRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The status of this table entry."
+        ::= { alaEServiceUNIProfileEntry 9 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--  The E-Service Service Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF  AlaEServiceEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A table that contains the services and their assigned SVLAN for the
+        E-Service feature."
+        ::= { alaEService 4 }
+
+alaEServiceEntry  OBJECT-TYPE
+        SYNTAX  AlaEServiceEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The svlan/ipmvlan-port association."
+        INDEX   { IMPLIED alaEServiceID }
+        ::= { alaEServiceTable 1 }
+
+AlaEServiceEntry ::=   SEQUENCE
+        {
+                alaEServiceID                   SnmpAdminString,
+                alaEServiceSVLAN                Integer32,
+                alaEServiceVlanType             INTEGER,
+                alaEServiceRowStatus            RowStatus
+        }
+
+alaEServiceID  OBJECT-TYPE
+        SYNTAX  SnmpAdminString (SIZE(1..32))
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A label given to uniquely identify this Service. Must be at least one character long."
+        ::= { alaEServiceEntry 1 }
+
+alaEServiceSVLAN OBJECT-TYPE
+        SYNTAX  Integer32 (1..4094)
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The SVLAN number of the SVLAN chosen to the be transport for this service."
+        ::= { alaEServiceEntry 2 }
+
+alaEServiceVlanType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                  unknown(0),
+                  svlan(1),
+                  ipmvlan(2)
+                }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The type of the vlan this service is going to attach to. When creating the service,
+        the type should match the vlanId specified in the request."
+        ::= { alaEServiceEntry 3 }
+
+alaEServiceRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The status of this table entry.  The supported value for set are
+        createAndGo (4) and destroy(6), to add or remove a service. When
+        creating or deleting the service, the user needs to provide both
+        the svlan and the vlantype objects."
+        ::= { alaEServiceEntry 4 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--  The E-Service SAP Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+alaEServiceSapTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF  AlaEServiceSapEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A table that contains the Service Access Points (Sap) listed by ID.
+        This table is used to create, delete, and modify the SAP's profile"
+        ::= { alaEService 5 }
+
+alaEServiceSapEntry  OBJECT-TYPE
+        SYNTAX  AlaEServiceSapEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The list of SAP."
+        INDEX   { alaEServiceSapID}
+        ::= { alaEServiceSapTable 1 }
+
+AlaEServiceSapEntry ::=   SEQUENCE
+        {
+                alaEServiceSapID                Integer32,
+                alaEServiceSapServiceID         SnmpAdminString,
+                alaEServiceSapProfile           SnmpAdminString,
+                alaEServiceSapRowStatus         RowStatus
+        }
+
+alaEServiceSapID  OBJECT-TYPE
+        SYNTAX Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A Number given to uniquely identify the SAP."
+        ::= { alaEServiceSapEntry 1 }
+
+alaEServiceSapServiceID  OBJECT-TYPE
+        SYNTAX  SnmpAdminString (SIZE(1..32))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "A label given to uniquely identify the Service this SAP is for. Must
+        be at least one character long."
+        ::= { alaEServiceSapEntry 2 }
+
+alaEServiceSapProfile  OBJECT-TYPE
+        SYNTAX  SnmpAdminString (SIZE(1..32))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The string identifying the SAP Profile this sap is to use. If specified, must match an existing
+        SAP Profile."
+        ::= { alaEServiceSapEntry 3 }
+
+alaEServiceSapRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The status of this table entry. The supported value for set are
+        createAndGo (4) and destroy(6), to add or remove a sap. When
+        creating the sap, the user needs to provide the service name in
+        the same set request."
+        ::= { alaEServiceSapEntry 4 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--  The E-Service SAP CVLAN Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceSapCvlanTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF  AlaEServiceSapCvlanEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A table that contains the Service Access Points (Sap) where the CVLANs are bound
+        to their service."
+        ::= { alaEService 6 }
+
+alaEServiceSapCvlanEntry  OBJECT-TYPE
+        SYNTAX  AlaEServiceSapCvlanEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The CVLAN to Sap binding."
+        INDEX   { alaEServiceSapCvlanSapID, alaEServiceSapCvlanCvlan }
+        ::= { alaEServiceSapCvlanTable 1 }
+
+AlaEServiceSapCvlanEntry ::=   SEQUENCE
+        {
+                alaEServiceSapCvlanSapID        Integer32,
+                alaEServiceSapCvlanCvlan        Integer32,
+                alaEServiceSapCvlanMapType      INTEGER,
+                alaEServiceSapCvlanRowStatus            RowStatus
+        }
+
+alaEServiceSapCvlanSapID  OBJECT-TYPE
+        SYNTAX Integer32 (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A Number given to uniquely identify this SAP."
+        ::= { alaEServiceSapCvlanEntry 1 }
+
+alaEServiceSapCvlanCvlan  OBJECT-TYPE
+        SYNTAX Integer32 (0..4094)
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "This object is the CVLAN ID that this binding is targeted at.  The CVLAN ID
+        may be 0, which indicates an all or untagged only mapping type."
+        ::= { alaEServiceSapCvlanEntry 2 }
+
+alaEServiceSapCvlanMapType  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                single (1),
+                all(2),
+                untaggedOnly (3)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "This object is the mapping type that defines what CVLANs are mapped into this service.
+        Multiple mappings can be defined for CVLAN to service, however only one all (2) or
+        untaggedOnly (3) mapping entry can be created per UNI.  A mapping type of Single (1)
+        denotes a specific CVLAN value to bind to the service. A mapping type of All (2)
+        denotes that all customer frames that do not map to any other SAP,
+        will be mapped into this service.  A mapping type of Untagged (3) denotes that only
+        the untagged frames will be mapped into this service."
+        DEFVAL { single }
+        ::= { alaEServiceSapCvlanEntry 3 }
+
+alaEServiceSapCvlanRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The status of this table entry.  The supported value for set are
+        createAndGo (4) and destroy(6), to add or remove a SAP."
+        ::= { alaEServiceSapCvlanEntry 4 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--  The E-Service Port Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServicePortTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF  AlaEServicePortEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A table that contains the ports used by the EService feature.  Both UNI and NNI
+        are listed here."
+        ::= { alaEService 7 }
+
+alaEServicePortEntry  OBJECT-TYPE
+        SYNTAX  AlaEServicePortEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The list of ports being used by EService."
+        INDEX   { alaEServicePortID}
+        ::= { alaEServicePortTable 1 }
+
+AlaEServicePortEntry ::=   SEQUENCE
+        {
+                alaEServicePortID               InterfaceIndex,
+                alaEServicePortType             INTEGER,
+                alaEServicePortVendorTpid       Integer32,
+                alaEServicePortLegacyStpBpdu    INTEGER,
+                alaEServicePortLegacyGvrpPdu    INTEGER,
+                alaEServicePortUniProfile       SnmpAdminString,
+                alaEServicePortTransBridging    INTEGER,
+                alaEServicePortLegacyMvrpPdu    INTEGER,
+                alaEServicePortRowStatus        RowStatus
+        }
+
+alaEServicePortID  OBJECT-TYPE
+        SYNTAX InterfaceIndex
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The IfIndex of this UNI or NNI Port."
+        ::= { alaEServicePortEntry 1 }
+
+alaEServicePortType  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                uni (1),
+                nni (3)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The type of port for Vlan Stacking operation. uni (1) represents a customer facing
+        port on which traffic may enter the E-Service.  nni (2) respresents a provider network
+        port over which the E-Service may be connected."
+        DEFVAL { uni }
+        ::= { alaEServicePortEntry 2 }
+
+alaEServicePortVendorTpid  OBJECT-TYPE
+        SYNTAX Integer32
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "he TPID for this port if type is NNI. It is used for the incoming data
+        traffic parsing and it is substituted to the 802.1Q standard Tpid for
+        the outgoing data traffic. This is used for compatibility with other vendor
+        equipment. The default value is the standard value 0x8100."
+        DEFVAL { 33024 }
+        ::= { alaEServicePortEntry 3 }
+
+alaEServicePortLegacyStpBpdu  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                notApplicable (0),
+                enable (1),
+                disable (2)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The legacy STP BPDU treatment for this port if NNI. It defines the type of processing
+         applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
+         BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be
+         enabled/disabled by this object.By default the value is disabled i.e
+         provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports."
+        DEFVAL { disable }
+        ::= { alaEServicePortEntry 4 }
+
+alaEServicePortLegacyGvrpPdu  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                notApplicable (0),
+                enable (1),
+                disable (2)
+        }
+        MAX-ACCESS  read-create
+        STATUS deprecated 
+        DESCRIPTION
+        "The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing
+         applied to GVRP PDUs on network ports. "
+        DEFVAL { disable }
+        ::= { alaEServicePortEntry 5 }
+
+alaEServicePortUniProfile OBJECT-TYPE
+        SYNTAX  SnmpAdminString (SIZE (1..31))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The label of an existing UNI profile that which contains various properties to be
+        applied to this port if UNI."
+        ::= { alaEServicePortEntry 6 }
+
+alaEServicePortTransBridging  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                enable (1),
+                disable (2)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The Transparent Bridging status for the nni Port."
+        DEFVAL { disable }
+        ::= { alaEServicePortEntry 7 }
+
+alaEServicePortLegacyMvrpPdu  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                notApplicable (0),
+                enable (1),
+                disable (2)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing
+         applied to MVRP PDUs on network ports. "
+        DEFVAL { disable }
+        ::= { alaEServicePortEntry 8 }
+
+alaEServicePortRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The status of this table entry. The supported value for set are
+        createAndGo (4) and destroy(6), to add or remove a binding"
+        ::= { alaEServicePortEntry 9 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--  The E-Service SAP-UNI Binding Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+alaEServiceSapUniTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF  AlaEServiceSapUniEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A table that contains the UNI that are bound to each SAP for classifying
+        traffic into each EService. Not that writing to this table may create
+        a new UNI."
+        ::= { alaEService 8 }
+
+alaEServiceSapUniEntry  OBJECT-TYPE
+        SYNTAX  AlaEServiceSapUniEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The list of SAP-UNI bindings being used by EService."
+        INDEX   { alaEServiceSapUniSap, alaEServiceSapUniUni}
+        ::= { alaEServiceSapUniTable 1 }
+
+AlaEServiceSapUniEntry ::=   SEQUENCE
+        {
+                alaEServiceSapUniSap            Integer32,
+                alaEServiceSapUniUni            InterfaceIndex,
+                alaEServiceSapUniRowStatus      RowStatus
+        }
+
+
+alaEServiceSapUniSap  OBJECT-TYPE
+        SYNTAX Integer32  (1..2147483647)
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The SAP ID that is configured onto this port."
+        ::= { alaEServiceSapUniEntry 1 }
+
+alaEServiceSapUniUni  OBJECT-TYPE
+        SYNTAX InterfaceIndex
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The IfIndex of this UNI Port."
+        ::= { alaEServiceSapUniEntry 2 }
+
+alaEServiceSapUniRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The status of this table entry. The supported value for set are
+        createAndGo (4) and destroy(6), to add or remove a binding"
+        ::= { alaEServiceSapUniEntry 3 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+--  The E-Service NNI-SVLAN Binding Table
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+alaEServiceNniSvlanTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF  AlaEServiceNniSvlanEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "A table that contains the SVLANs bound to each NNI for use by the
+        EService feature."
+        ::= { alaEService 9 }
+
+alaEServiceNniSvlanEntry  OBJECT-TYPE
+        SYNTAX  AlaEServiceNniSvlanEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The list of NNI-SVLAN bindings being used by EService."
+        INDEX   { alaEServiceNniSvlanNni, alaEServiceNniSvlanSvlan}
+        ::= { alaEServiceNniSvlanTable 1 }
+
+AlaEServiceNniSvlanEntry ::=   SEQUENCE
+        {
+                alaEServiceNniSvlanNni          InterfaceIndex,
+                alaEServiceNniSvlanSvlan        Integer32,
+                alaEServiceNniSvlanRowStatus    RowStatus,
+                alaEServiceNniSvlanVpaType      INTEGER
+        }
+
+alaEServiceNniSvlanNni  OBJECT-TYPE
+        SYNTAX InterfaceIndex
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The IfIndex of this NNI Port."
+        ::= { alaEServiceNniSvlanEntry 1 }
+
+alaEServiceNniSvlanSvlan  OBJECT-TYPE
+        SYNTAX Integer32 (2..4094)
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "The SVLAN bound to this port. SVLAN cannot be 1."
+        ::= { alaEServiceNniSvlanEntry 2 }
+
+alaEServiceNniSvlanRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The status of this table entry. The supported value for set are
+        createAndGo (4) and destroy(6), to add or remove a binding"
+        ::= { alaEServiceNniSvlanEntry 3 }
+
+-- alaEServiceNniSvlanVpaType is added in 6.3.4.R01
+
+alaEServiceNniSvlanVpaType  OBJECT-TYPE
+        SYNTAX INTEGER {
+                         stp (1),
+                         erp (2)
+                       }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+        "The object is used to specify whether the VPA state is to
+        be controlled by an ERP or a STP. By default VPA state is
+        controlled by STP."
+        DEFVAL  { stp }
+        ::= { alaEServiceNniSvlanEntry 4 }
+
+alaEServiceGlobals OBJECT IDENTIFIER ::= { alaEService 10 }
+
+alaEServiceGlobalTransBridging  OBJECT-TYPE
+        SYNTAX  INTEGER
+        {
+                enable (1),
+                disable (2)
+        }
+        MAX-ACCESS  read-write
+        STATUS  current
+        DESCRIPTION
+        "The global transparent bridging status."
+        DEFVAL { disable }
+        ::= { alaEServiceGlobals 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+-- COMPLIANCE
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alcatelIND1EServiceMIBCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+        "Compliance statement for E-Service."
+        MODULE  MANDATORY-GROUPS
+                {
+                alaEServiceSapProfileGroup,
+                alaEServiceUNIProfileGroup,
+                alaEServiceGroup,
+                alaEServiceSapGroup,
+                alaEServiceSapUniGroup,
+                alaEServiceSapCvlanGroup,
+                alaEServicePortGroup,
+                alaEServiceNniSvlanGroup,
+                alaEServiceInfoGroup,
+                alaEServiceGlobalGroup
+                }
+        ::= { alcatelIND1EServiceMIBCompliances 1 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+-- UNITS OF CONFORMANCE
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+alaEServiceSapProfileGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServiceSapProfileCVLANTreatment,
+                alaEServiceSapProfileReplacementCVLAN,
+                alaEServiceSapProfilePriorityMapMode,
+                alaEServiceSapProfileFixedPriority,
+                alaEServiceSapProfileIngressBW,
+                alaEServiceSapProfileBandwidthShare,
+                alaEServiceSapProfileRowStatus,
+                alaEServiceSapProfileEgressBW
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Service Sap Profiles."
+        ::= { alcatelIND1EServiceMIBGroups 1 }
+
+alaEServiceUNIProfileGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServiceUNIProfileStpBpduTreatment,
+                alaEServiceUNIProfile8021xTreatment,
+                alaEServiceUNIProfile8021ABTreatment,
+                alaEServiceUNIProfile8023adTreatment,
+                alaEServiceUNIProfileGvrpTreatment,
+                alaEServiceUNIProfileAmapTreatment,
+                alaEServiceUNIProfileMvrpTreatment,
+                alaEServiceUNIProfileRowStatus
+        }
+        STATUS current
+        DESCRIPTION
+        "Collection of objects for management of EService UNI Profiles."
+        ::= { alcatelIND1EServiceMIBGroups 2 }
+
+alaEServiceGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServiceSVLAN,
+                alaEServiceVlanType,
+                alaEServiceRowStatus
+
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Services."
+        ::= { alcatelIND1EServiceMIBGroups 3 }
+
+alaEServiceSapGroup OBJECT-GROUP
+        OBJECTS
+        {
+
+                alaEServiceSapServiceID,
+                alaEServiceSapProfile,
+                alaEServiceSapRowStatus
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Service SAPs."
+        ::= { alcatelIND1EServiceMIBGroups 4 }
+
+alaEServiceSapCvlanGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServiceSapCvlanMapType,
+                alaEServiceSapCvlanRowStatus
+
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Service SAP CVLAN bindings."
+        ::= { alcatelIND1EServiceMIBGroups 5 }
+
+
+alaEServicePortGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServicePortType,
+                alaEServicePortVendorTpid,
+                alaEServicePortLegacyStpBpdu,
+                alaEServicePortLegacyGvrpPdu,
+                alaEServicePortUniProfile,
+                alaEServicePortTransBridging,
+                alaEServicePortLegacyMvrpPdu,
+        alaEServicePortRowStatus
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Service Ports."
+        ::= { alcatelIND1EServiceMIBGroups 6 }
+
+alaEServiceSapUniGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServiceSapUniRowStatus
+
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Service SAP to UNI
+        Binding."
+        ::= { alcatelIND1EServiceMIBGroups 7 }
+
+alaEServiceNniSvlanGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServiceNniSvlanRowStatus,
+                alaEServiceNniSvlanVpaType
+
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Service SVLAN to NNI
+        Binding."
+        ::= { alcatelIND1EServiceMIBGroups 8 }
+
+
+alaEServiceInfoGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServiceMode
+
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Service Info
+        Binding."
+        ::= { alcatelIND1EServiceMIBGroups 9 }
+
+alaEServiceGlobalGroup OBJECT-GROUP
+        OBJECTS
+        {
+                alaEServiceGlobalTransBridging
+
+        }
+        STATUS  current
+        DESCRIPTION
+        "Collection of objects for management of E-Service global
+        configuration."
+        ::= { alcatelIND1EServiceMIBGroups 10 }
+END
+