Initial commitHEADmain

1 files changed, 1207 insertions, 0 deletions

diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-TC-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-TC-MIB
new file mode 100644
index 0000000..1830939
--- /dev/null
+++ b/MIBS/nokia/aos7/ALCATEL-IND1-TIMETRA-TC-MIB
@@ -0,0 +1,1207 @@
+ALCATEL-IND1-TIMETRA-TC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY,
+        Unsigned32, Integer32           FROM SNMPv2-SMI
+
+        TEXTUAL-CONVENTION              FROM SNMPv2-TC
+
+        timetraModules                  FROM ALCATEL-IND1-TIMETRA-GLOBAL-MIB
+        ;
+
+timetraTCMIBModule   MODULE-IDENTITY
+        LAST-UPDATED    "0801010000Z"
+        ORGANIZATION    "Alcatel"
+        CONTACT-INFO    
+            "Alcatel 7x50 Support
+             Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml"
+        DESCRIPTION
+        "This document is the SNMP MIB module for the SNMP Textual
+        Conventions (TCs) used in the Alcatel 7x50 manageability
+        instrumentation.
+
+        Copyright 2003-2008 Alcatel-Lucent. All rights reserved.
+        Reproduction of this document is authorized on the condition
+        that the foregoing copyright notice is included.
+
+        This SNMP MIB module (Specification) embodies Alcatel's
+        proprietary intellectual property.  Alcatel retains
+        all title and ownership in the Specification, including any
+        revisions.
+
+        Alcatel grants all interested parties a non-exclusive
+        license to use and distribute an unmodified copy of this
+        Specification in connection with management of Alcatel
+        products, and without fee, provided this copyright notice and
+        license appear on all copies.
+
+        This Specification is supplied `as is', and Alcatel
+        makes no warranty, either express or implied, as to the use,
+        operation, condition, or performance of the Specification."
+
+--
+--  Revision History
+--
+        REVISION        "0801010000Z"
+        DESCRIPTION     "Rev 6.0                01 Jan 2008 00:00
+                         6.0 release of the TIMETRA-TC-MIB."
+
+        REVISION        "0701010000Z"
+        DESCRIPTION     "Rev 5.0                01 Jan 2007 00:00
+                         5.0 release of the TIMETRA-TC-MIB."
+
+        REVISION        "0603230000Z"   
+        DESCRIPTION     "Rev 4.0                23 Mar 2006 00:00
+                         4.0 release of the TIMETRA-TC-MIB."
+
+        REVISION        "0508310000Z"   
+        DESCRIPTION     "Rev 3.0                31 Aug 2005 00:00
+                         3.0 release of the TIMETRA-TC-MIB."
+
+        REVISION        "0501240000Z"   
+        DESCRIPTION     "Rev 2.1                24 Jan 2005 00:00
+                         2.1 release of the TIMETRA-TC-MIB."
+
+        REVISION        "0401150000Z"
+        DESCRIPTION     "Rev 2.0                15 Jan 2004 00:00
+                         2.0 release of the TIMETRA-TC-MIB."
+
+        REVISION        "0308150000Z"
+        DESCRIPTION     "Rev 1.2                15 Aug 2003 00:00
+                         1.2 release of the TIMETRA-TC-MIB."
+
+        REVISION        "0301200000Z"
+        DESCRIPTION     "Rev 1.0                20 Jan 2003 00:00
+                         1.0 Release of the TIMETRA-TC-MIB."
+
+        REVISION        "0105290000Z"
+        DESCRIPTION     "Rev 0.1                14 Aug 2000 00:00
+                         First version of the TIMETRA-TC-MIB."
+
+        ::= { timetraModules 2 }
+
+-- InterfaceIndex TC is defined here to work about problems with
+-- importing from IF-MIB, rfc1573.mib
+
+   -- InterfaceIndex contains the semantics of ifIndex and
+   -- should be used for any objects defined on other mib
+   -- modules that need these semantics.
+
+InterfaceIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+       "A unique value, greater than zero, for each interface
+        or interface sub-layer in the managed system.  It is
+        recommended that values are assigned contiguously
+        starting from 1.  The value for each interface sub-
+        layer must remain constant at least from one re-
+        initialization of the entity's network management
+        system to the next re-initialization."
+    SYNTAX  Integer32
+
+TmnxPortID ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "A portid is an unique 32 bit number encoded as shown below.
+            
+            32 30 | 29 26 | 25 22 | 21 16 | 15  1 |
+            +-----+-------+-------+-------+-------+
+            |000  |  slot |  mda  | port  |  zero | Physical Port
+            +-----+-------+-------+-------+-------+
+
+            32 30 | 29 26 | 25 22 | 21 16 | 15  1 |
+            +-----+-------+-------+-------+-------+
+            |001  |  slot |  mda  | port  |channel| Channel
+            +-----+-------+-------+-------+-------+
+
+         Slots, mdas (if present), ports, and channels are numbered
+         starting with 1.
+
+            32     29 | 28             10 | 9   1 |
+            +---------+-------------------+-------+
+            | 0 1 0 0 |   zeros           |   ID  | Virtual Port
+            +---------+-------------------+-------+
+
+            32     29 | 28                9 | 8 1 |
+            +---------+---------------------+-----+
+            | 0 1 0 1 |   zeros             | ID  | LAG Port
+            +---------+---------------------+-----+
+
+        A card port number (cpn) has significance within the context
+        of the card on which it resides(ie., cpn 2 may exist in one or
+        more cards in the chassis).  Whereas, portid is an
+        unique/absolute port number (apn) within a given chassis.
+        
+        An 'invalid portid' is a TmnxPortID with a value of 0x1e000000 as 
+        represented below.
+        
+            32 30 | 29 26 | 25 22 | 21 16 | 15  1 |
+            +-----+-------+-------+-------+-------+
+            |zero | ones  | zero  |  zero |  zero | Invalid Port
+            +-----+-------+-------+-------+-------+"
+        
+    SYNTAX  Unsigned32
+
+TmnxEncapVal ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "The value of the label used to identify the entity using the
+       specified encapsulation value on a specific port.
+
+       The format of this object depends on the encapsulation type
+       defined on this port.
+
+       When the encapsulation is nullEncap the value of this object
+       must be zero.
+
+       31                                   0
+       +--------+--------+--------+--------+
+       |00000000 00000000 00000000 00000000|
+       +--------+--------+--------+--------+
+
+       When the encapsulation is dot1qEncap the value of this object
+       is equal to the 12-bit IEEE 802.1Q VLAN ID.
+
+       31                                   0
+       +--------+--------+--------+--------+
+       |00000000 00000000 0000XXXX XXXXXXXX|
+       +--------+--------+--------+--------+
+
+       When the encapsulation is mplsEncap the value of this object
+       is equal to the 20-bit LSP ID.
+
+       31                                   0
+       +--------+--------+--------+--------+
+       |00000000 0000XXXX XXXXXXXX XXXXXXXX|
+       +--------+--------+--------+--------+
+
+       When the encapsulation is frEncap, the value of this object is
+       equal to the 10-bit Frame Relay DLCI.
+
+       31                                   0
+       +--------+--------+--------+--------+
+       |00000000 00000000 000000XX XXXXXXXX|
+       +--------+--------+--------+--------+
+
+       When the encapsulation is qinqEncap, the value of the outer
+       802.1Q VLAN ID is encoded in the least significant 16 bits,
+       and the value of the inner VLAN ID is encoded in the most
+       significant 16 bits.
+
+       31                                   0
+       +--------+--------+--------+--------+
+       |0000YYYY YYYYYYYY 0000XXXX XXXXXXXX|
+       +--------+--------+--------+--------+
+
+       When the encapsulation is atmEncap, the value
+       of the ATM VCI is encoded in the least significant 
+       16 bits, and the value of the ATM VPI is encoded 
+       in the next 12 bits.
+
+       For ATM VCs, the top 2 bits are 00.  The value of
+       the ATM VCI is encoded in the least significant 16 
+       bits, and the value of the ATM VPI is encoded in the next
+       12 bits.
+                     
+       31                                   0
+       +--------+--------+--------+--------+
+       |0000YYYY YYYYYYYY XXXXXXXX XXXXXXXX|
+       +--------+--------+--------+--------+   
+
+       For ATM VPs, the top 2 bits are 01.  The value of
+       the ATM VPI is encoded in the least significant 12 bits.
+
+       31                                   0
+       +--------+--------+--------+--------+
+       |01000000 00000000 0000XXXX XXXXXXXX|
+       +--------+--------+--------+--------+          
+
+       For ATM VP ranges, the top 2 bits are 10.  The value of
+       the start of the ATM VPI range is encoded in the least significant 
+       12 bits, and the value of the end of the ATM VP range is encoded
+       in the next 12 bits.
+
+       31                                   0
+       +--------+--------+--------+--------+
+       |10000000 YYYYYYYY YYYYXXXX XXXXXXXX|
+       +--------+--------+--------+--------+         
+
+       For ATM ports, the top 2 bits are 11, and the rest of the bits 
+       must be zero.  
+
+       31                                   0
+       +--------+--------+--------+--------+
+       |11000000 00000000 00000000 00000000|
+       +--------+--------+--------+--------+         
+
+       When the encapsulation is wanMirrorEncap the value of this 
+       object is equal to the 12-bit value.
+                     
+       31                                   0
+       +--------+--------+--------+--------+
+       |00000000 00000000 0000XXXX XXXXXXXX|
+       +--------+--------+--------+--------+      
+
+       Some ports have a restrictions to the encapsulation types that
+       they can support and hence impose restrictions on the respective
+       formats defined above."       
+    SYNTAX  Unsigned32
+
+QTag ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The QTag data type is a 12-bit integer tag used to identify
+        a service.  The values 0 and 4095 are not allowed."
+    SYNTAX  INTEGER (1..4094)
+
+QTagOrZero ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type QTagOrZero represents a VLAN tag. 
+        
+         The value '0' indicates that no VLAN tag is provisioned, or that its value
+         is unknown."
+    SYNTAX  Unsigned32 (0..4094)
+
+TmnxStrSapId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+       "The value of TmnxStrSapId is a printable string which
+        contains the owner SAP Id or equivalent on a remote system.
+
+        The string should contain the printable string equivalent of the
+        textual-conventions TmnxPortID and TmnxEncapVal in the format
+        specified as TmnxPortID[:TmnxEncapVal]"
+    SYNTAX OCTET STRING (SIZE (0..32))
+
+IpAddressPrefixLength ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "the number of bits to match in an IP address mask."
+    REFERENCE ""
+    SYNTAX INTEGER (0..32)
+
+--
+--      TmnxActionType
+--
+TmnxActionType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The TmnxActionType data type is an enumerated integer
+        that describes the values used to support action or
+        operation style commands.  Setting a variable of this
+        type to 'doAction' causes the action to occur.  GETs and
+        GETNEXTs on this variable return 'not-applicable'."
+    SYNTAX  INTEGER {
+                doAction (1),
+                notApplicable (2)
+            }
+
+TmnxAdminState ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The TmnxAdminState data type is an enumerated integer that describes
+        the values used to identify the administratively desired state of
+        functional modules."
+    SYNTAX  INTEGER {
+                noop (1),
+                inService (2),
+                outOfService (3)
+                }
+
+TmnxOperState ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The TmnxOperState data type is an enumerated integer that describes
+        the values used to identify the current operational state of functional
+        modules."
+    SYNTAX  INTEGER {
+                unknown (1),
+                inService (2),
+                outOfService (3),
+                transition (4)
+                }
+
+TmnxStatus ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The TmnxStatus data type is an enumerated integer that describes the
+        values used to identify the current status of functional modules in the
+        system such as OSPF and MPLS protocols. Setting this variable to
+        'create' causes instantiation of the feature in the system.  Setting it
+        to 'delete' removes the instance and all associated configuration
+        information."
+    SYNTAX  INTEGER {
+                create (1),
+                delete (2)
+                }
+
+TmnxEnabledDisabled ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The TmnxEnabledDisabled data type is an enumerated integer that
+         describes the values used to identify whether an entity is
+         'enabled' or 'disabled'."
+    SYNTAX  INTEGER {
+                enabled  (1),
+                disabled (2)
+                }
+
+TNamedItem ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       current
+    DESCRIPTION
+        "The name of an item.  When used as an index to a table, the item
+         name uniquely identifies the instance.  When used in a reference
+         (TNamedItemOrEmpty) the item name entry must exist in the table.
+
+         Note, use only NVT ASCII displayable characters
+         here, no control characters, no UTF-8, etc."
+    SYNTAX OCTET STRING (SIZE (1..32))
+
+TNamedItemOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       current
+    DESCRIPTION
+        "The name of an item, or an empty string.  When used in a reference
+         (TNamedItemOrEmpty) the item name entry must exist in the table.
+
+         Note, use only NVT ASCII displayable characters
+         here, no control characters, no UTF-8, etc."
+    SYNTAX OCTET STRING (SIZE (0 | 1..32))
+
+TItemDescription ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       current
+    DESCRIPTION
+        "Description for an item.  Note, use only NVT ASCII displayable characters
+        here, no control characters, no UTF-8, etc."
+    SYNTAX OCTET STRING (SIZE(0..80))
+
+TItemLongDescription ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       current
+    DESCRIPTION
+        "Longer description for an item.  Note, use only NVT ASCII displayable
+        characters here, no control characters, no UTF-8, etc."
+    SYNTAX OCTET STRING (SIZE(0..160))
+
+TmnxVRtrID ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "A number used to identify a virtual router instance in the system."
+    SYNTAX       Integer32 (1..4096)
+
+TmnxVRtrIDOrZero ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "A number used to identify a virtual router instance in the system.
+         The number 0 will have special significance in the context the TC 
+         is used."
+    SYNTAX       Integer32 (0..4096)
+
+TmnxBgpAutonomousSystem ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "an autonomous system (AS) number."
+    REFERENCE    "BGP4-MIB.bgpPeerRemoteAs"
+    SYNTAX       INTEGER (0..65535)
+
+TmnxBgpLocalPreference ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "a local route preference value."
+    REFERENCE    "RFC 1771 section 4.3 Path Attributes e)"
+    SYNTAX       Unsigned32
+
+TmnxBgpPreference ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "a route preference value."
+    REFERENCE    "RFC 1771 section 4.3 Path Attributes e)"
+    SYNTAX       Unsigned32 (0..255)
+
+TmnxCustId ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION     "A number used to identify a Customer or
+                     Subscriber. This ID must be unique within
+                     the Service Domain. The value 0 is used as
+                     the null ID."
+    SYNTAX          Unsigned32 (0|1..2147483647)
+
+TmnxServId ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION     "A number used to identify a Service. This ID
+                     must be unique within the Service Domain.
+                     The value 0 is used as the null ID."
+    SYNTAX          Unsigned32 (0|1..2147483647)
+
+ServiceAdminStatus ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "ServiceAdminStatus data type is an enumerated integer that
+                  describes the values used to identify the administrative
+                  state of a service."
+    REFERENCE    ""
+    SYNTAX       INTEGER {
+                     up(1),
+                     down(2)
+                 }
+
+ServiceOperStatus ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION  "ServiceOperStatus data type is an enumerated integer that
+                  describes the values used to identify the current operational
+                  state of a service."
+    REFERENCE    ""
+    SYNTAX       INTEGER {
+                     up(1),
+                     down(2)
+                 }
+
+TPolicyID ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a policy."
+    SYNTAX Unsigned32 (0..65535)
+
+TSapIngressPolicyID ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a SAP ingress policy."
+    SYNTAX Unsigned32 (0..65535)
+
+TSapEgressPolicyID ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a SAP egress policy."
+    SYNTAX Unsigned32 (1..65535)
+
+TPolicyStatementNameOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT    "255a"
+    STATUS       current
+    DESCRIPTION
+        "The name of a policy statement, when an object refers to it."
+    SYNTAX OCTET STRING (SIZE (0 | 1..32))
+
+TmnxVcType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION     "The value of TmnxVcType is an enumerated integer that
+                     indicates a Virtual Circuit (VC) type. 'frDlciMartini(1)'
+                     replaces the old 'frDlci' when used over martini tunnels."
+    SYNTAX      INTEGER {
+                        frDlciMartini(1),
+                        atmSdu(2),
+                        atmCell(3),
+                        ethernetVlan(4),
+                        ethernet(5),
+                        atmVccCell(9),
+                        atmVpcCell(10),
+                        ipipe(11),
+                        satopE1(17),
+                        satopT1(18),
+                        satopE3(19),
+                        satopT3(20),
+                        cesopsn(21),
+                        cesopsnCas(23),
+                        frDlci(25),
+                        mirrorDest(4096)
+                    }
+
+TmnxVcId ::=  TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION     "A 32 bit number is used to identify a VC(Virtual Circuit).
+                     The VC ID cannot be 0."
+    SYNTAX          Unsigned32 (1..4294967295)
+
+TmnxVcIdOrNone ::=  TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION     "A 32 bit number is used to identify a VC(Virtual Circuit).
+                     A value of 0 indicates no VC ID is configured or 
+                     available."
+    SYNTAX          Unsigned32 (0|1..4294967295)
+
+
+-- generic TEXTUAL-CONVENTIONs for common technology (IEEE, IETF)
+
+
+Dot1PPriority ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "IEEE 802.1p priority.  zero is lowest, seven is highest.
+         -1 means not set"
+    REFERENCE ""
+    SYNTAX      INTEGER (-1 | 0..7)
+
+ServiceAccessPoint ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "802.2 LLC SAP value, Source and Destination."
+    REFERENCE
+        "assigned numbers:  http://www.iana.org/assignments/ieee-802-numbers"
+    SYNTAX      INTEGER (-1 | 0..255)
+
+TLspExpValue ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+        "MPLS Experimental bits. -1 means not set."
+    REFERENCE ""
+    SYNTAX      INTEGER (-1 | 0..7)
+
+TIpProtocol ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "IP protocol number.  well known protocol numbers include ICMP(1),
+         TCP(6), UDP(17).
+
+         -1 means value not set.
+         -2 indicates protocol wildcard for UDP and TCP."
+    REFERENCE "http://www.iana.org/assignments/protocol-numbers"
+    SYNTAX          INTEGER (-2 | -1 | 0..255)
+
+TIpOption ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "IP packet options octet.  explanation of the octet bits:
+
+     IP OPTION NUMBERS
+
+     The Internet Protocol (IP) has provision for optional header fields
+     identified by an option type field.  Options 0 and 1 are exactly one
+     octet which is their type field.  All other options have their one
+     octet type field, followed by a one octet length field, followed by
+     length-2 octets of option data.  The option type field is sub-divided
+     into a one bit copied flag, a two bit class field, and a five bit
+     option number.  These taken together form an eight bit value for the
+     option type field.  IP options are commonly refered to by this value.
+
+
+     Copy Class Number Value Name                Reference
+     ---- ----- ------ ----- ------------------------------- ---------
+        0     0      0     0 EOOL   - End of Options List    [RFC791,JBP]
+        0     0      1     1 NOP    - No Operation           [RFC791,JBP]
+        1     0      2   130 SEC    - Security                  [RFC1108]
+        1     0      3   131 LSR    - Loose Source Route     [RFC791,JBP]
+        0     2      4    68 TS     - Time Stamp             [RFC791,JBP]
+        1     0      5   133 E-SEC  - Extended Security         [RFC1108]
+        1     0      6   134 CIPSO  - Commercial Security           [???]
+        0     0      7     7 RR     - Record Route           [RFC791,JBP]
+        1     0      8   136 SID    - Stream ID              [RFC791,JBP]
+        1     0      9   137 SSR    - Strict Source Route    [RFC791,JBP]
+        0     0     10    10 ZSU    - Experimental Measurement      [ZSu]
+        0     0     11    11 MTUP   - MTU Probe                 [RFC1191]*
+        0     0     12    12 MTUR   - MTU Reply                 [RFC1191]*
+        1     2     13   205 FINN   - Experimental Flow Control    [Finn]
+        1     0     14   142 VISA   - Expermental Access Control [Estrin]
+        0     0     15    15 ENCODE - ???                      [VerSteeg]
+        1     0     16   144 IMITD  - IMI Traffic Descriptor        [Lee]
+        1     0     17   145 EIP    - Extended Internet Protocol[RFC1385]
+        0     2     18    82 TR     - Traceroute        [RFC1393]
+        1     0     19   147 ADDEXT - Address Extension    [Ullmann IPv7]
+        1     0     20   148 RTRALT - Router Alert              [RFC2113]
+        1     0     21   149 SDB    - Selective Directed Broadcast[Graff]
+        1     0     22   150 NSAPA  - NSAP Addresses          [Carpenter]
+        1     0     23   151 DPS    - Dynamic Packet State        [Malis]
+        1     0     24   152 UMP    - Upstream Multicast Pkt. [Farinacci]
+
+     [Note, an asterisk (*) denotes an obsoleted IP Option Number.]
+        "
+    REFERENCE "http://www.iana.org/assignments/ip-parameters"
+    SYNTAX          INTEGER (0..255)
+
+TTcpUdpPort ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The number of a TCP or UDP port.
+         Well known port numbers include
+         ftp-data(20), ftp(21), telnet(23), smtp(25), http(80),
+         pop3(110), nntp(119), snmp(161), snmptrap(162), etc."
+    REFERENCE "http://www.iana.org/assignments/port-numbers"
+    SYNTAX INTEGER (0 | 1..65535)
+
+TTcpUdpPortOperator ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+       "The operator specifies the manner in which a couple of other
+        MIB objects in the table are supposed to be used.
+
+        Operator        Value1               Value2
+        ----------------------------------------------------
+        none(0)         Any(0)               Any(0)
+        eq(1)           Specified Value      Any(0)
+        range(2)        Starting Value       Ending Value
+        lt(3)           Specified Value      Any(0)
+        gt(4)           Specified Value      Any(0)
+
+        'Any(0)' specifies that, this object can accept any values
+         but would default to 0. "
+    SYNTAX       INTEGER {
+                    none(0),
+                    eq(1),
+                    range(2),
+                    lt(3),
+                    gt(4)
+                 }
+
+TFrameType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+       "The type of the frame for which this mac filter match criteria is
+        defined."
+    SYNTAX       INTEGER {
+                    e802dot3(0),
+                    e802dot2LLC(1),
+                    e802dot2SNAP(2),
+                    ethernetII(3)
+                 }
+
+TQueueId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The value of TQueueId specifies the identification number of a
+         queue.  A value of zero (0) indicates that no specific queue 
+         identification has been assigned for this object. When an object
+         of type TQueueId is an SNMP table index, an index value of zero 
+         (0) is not allowed and a noCreation error will be returned."
+    SYNTAX INTEGER (0 | 1..32)
+
+TIngressQueueId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The value of TIngressQueueId specifies the identification number 
+         of an ingress queue.  A value of zero (0) indicates that no 
+         specific queue identification has been assigned for this object. 
+         When an object of type TIngressQueueId is an SNMP table index,
+         an index value of zero (0) is not allowed and a noCreation error
+         will be returned."
+    SYNTAX INTEGER (0 | 1..32)
+
+TEgressQueueId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The value of TEgressQueueId specifies the identification number 
+         of an egress queue.  A value of zero (0) indicates that no 
+         specific queue identification has been assigned for this object. 
+         When an object of type TEgressQueueId is an SNMP table index,
+         an index value of zero (0) is not allowed and a noCreation error
+         will be returned."
+    SYNTAX INTEGER (0 | 1..8)
+
+--
+-- TEXTUAL-CONVENTIONs for Alcatel 7x50 SR series common items
+--
+
+TDSCPName ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT    "255a"
+    STATUS       current
+    DESCRIPTION
+        "The name of a Differential Services Code Point value."
+    SYNTAX OCTET STRING (SIZE (1..32))
+
+TDSCPNameOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT    "255a"
+    STATUS       current
+    DESCRIPTION
+        "The name of a Differential Services Code Point value."
+    SYNTAX OCTET STRING (SIZE (0 | 1..32))
+
+TDSCPValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The value of a Differential Services Code Point."
+    SYNTAX INTEGER (0..63)
+
+TDSCPValueOrNone ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The value of a Differential Services Code Point (DSCP). A value
+         of -1 means that no DSCP value is configured or available."
+    SYNTAX INTEGER (-1 | 0..63)
+
+TDSCPFilterActionValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The value of a Differential Services Code Point. -1 means not set."
+    SYNTAX INTEGER (-1 | 0..255)
+
+TFCName ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT    "255a"
+    STATUS       current
+    DESCRIPTION
+        "The name of a Forwarding Class entry."
+    SYNTAX OCTET STRING (SIZE (1..32))
+
+TFCNameOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT    "255a"
+    STATUS       current
+    DESCRIPTION
+        "The name of a Forwarding Class entry."
+    SYNTAX OCTET STRING (SIZE (0 | 1..32))
+
+TFCSet ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "This data type describes a set of Forwarding Classes."
+    SYNTAX      BITS {
+                       be (0),
+                       l2 (1),
+                       af (2),
+                       l1 (3),
+                       h2 (4),
+                       ef (5),
+                       h1 (6),
+                       nc (7)
+                }
+
+TFCType ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "This data type enumerates the Forwarding Classes."
+    SYNTAX       INTEGER {
+                       be (0),
+                       l2 (1),
+                       af (2),
+                       l1 (3),
+                       h2 (4),
+                       ef (5),
+                       h1 (6),
+                       nc (7)
+                }
+
+TmnxTunnelType ::= TEXTUAL-CONVENTION
+    STATUS   current
+    DESCRIPTION
+       "The type of this tunnel entity."
+    SYNTAX   INTEGER {
+                 sdp (1),
+                 ldp (2),
+                 rsvp (3),
+                 gre (4),
+                 bypass (5),
+                 invalid (6)
+                 }
+
+TmnxTunnelID ::= TEXTUAL-CONVENTION
+    STATUS   current
+    DESCRIPTION
+       "The identifying value for a BGP-VPRN tunnel.  Depending on the
+        tunnel type the associated tunnel-id may be an sdp-id, an lsp-id
+        or zero(0)."
+    SYNTAX   Unsigned32
+
+TmnxBgpRouteTarget ::= TEXTUAL-CONVENTION
+    STATUS     current
+    DESCRIPTION
+        "TmnxBgpRouteTarget is an readable string that specifies the
+         extended community name to be accepted by a Route Reflector Server
+         or advertised by the router when reflecting any routes. I.e, it
+         does not apply to routes that are not reflected by the router."
+    SYNTAX     OCTET STRING (SIZE(1..32))
+
+TmnxVPNRouteDistinguisher ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The VPRN route distinguisher is a 8-octet object. It contains a
+         2-octet type field followed by a 6-octet value field. The type
+         field specify how to interpret the value field.
+
+         Type 0 specifies two subfields as a 2-octet administrative field
+         and a 4-octet assigned number subfield.
+
+         Type 1 specifies two subfields as a 4-octet administrative field
+         which must contain an IP address and a 2-octet assigned number
+         subfield.
+
+         Type 2 specifies two subfields as a 4-octet administrative field
+         which contains a 4-octet AS number and a 2-octet assigned number
+         subfield."
+    SYNTAX      OCTET STRING (SIZE (8))
+
+SdpBindId ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION     "The value used to uniquely identify an SDP Binding.
+                     The first four octets correspond to the zero-extended
+                     16-bit SDP ID, while the remaining four octets
+                     correspond to the 32-bit VC ID, both encoded in network
+                     byte order."
+    SYNTAX          OCTET STRING (SIZE (8))
+
+TmnxVRtrMplsLspID ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION     "A unique value, greater than zero, for each Label
+                     Switched Path in the managed system."
+    SYNTAX          Unsigned32 (0..65535)
+
+TPortSchedulerPIR ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The Peak Information Rate (PIR) rate to be used in kbps.
+         The value -1 means maximum rate."
+    SYNTAX      Integer32 (-1 | 1..40000000)
+
+TPortSchedulerCIR ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The Committed Information Rate (CIR) rate to be used in kbps.
+         The value -1 means maximum rate."
+    SYNTAX      Integer32 (-1 | 0..40000000)
+
+TWeight ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The weight of the specified entity while feeding into the parent."
+    SYNTAX       Integer32 (0..100)
+
+TCIRRate ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The CIR rate to be used in kbps. The value -1 means maximum rate."
+    SYNTAX       Integer32 (-1 | 0..100000000)
+
+TPIRRate ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The PIR rate to be used in kbps. The value -1 means maximum rate."
+    SYNTAX      Integer32 (-1 | 1..100000000)
+
+TSecondaryShaper10GPIRRate ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The secondary shaper PIR rate to be used in Mbps.
+         The value -1 means maximum rate."
+    SYNTAX      Integer32 (-1 | 1..10000)
+
+TPIRRateOverride ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The PIR rate to be used in kbps. The value -1 means maximum rate.
+         A value of -2 specifies no override."
+    SYNTAX      Integer32 (-2 | -1 | 1..100000000)
+
+TPIRRateOrZero ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The PIR rate to be used in kbps. The value -1 means maximum rate.
+         The value 0 means undefined rate."
+    SYNTAX      Integer32 (-1 | 0..100000000)
+
+TmnxDHCP6MsgType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The DHCP6 messagetype."
+    SYNTAX INTEGER {
+               dhcp6MsgTypeSolicit      (1),
+               dhcp6MsgTypeAdvertise    (2),
+               dhcp6MsgTypeRequest      (3),
+               dhcp6MsgTypeConfirm      (4),
+               dhcp6MsgTypeRenew        (5),
+               dhcp6MsgTypeRebind       (6),
+               dhcp6MsgTypeReply        (7),
+               dhcp6MsgTypeRelease      (8),
+               dhcp6MsgTypeDecline      (9),
+               dhcp6MsgTypeReconfigure  (10),
+               dhcp6MsgTypeInfoRequest  (11),
+               dhcp6MsgTypeRelayForw    (12),
+               dhcp6MsgTypeRelayReply   (13),
+               dhcp6MsgTypeMaxValue     (14)
+           }
+
+TmnxOspfInstance ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION     "A number used to identify an instance of OSPF." 
+    SYNTAX          Unsigned32 (0..31)
+
+TmnxBGPFamilyType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The value of TmnxBGPFamilyType specifies the AFI-SAFI family for
+         BGP peer."
+    SYNTAX      BITS {
+                    ipv4Unicast (0),
+                    ipv4Multicast (1),
+                    ipv4UastMcast (2),
+                    ipv4MplsLabel (3),
+                    ipv4Vpn (4),
+                    ipv6Unicast (5),
+                    ipv6Multicast (6),
+                    ipv6UcastMcast (7),
+                    ipv6MplsLabel (8),
+                    ipv6Vpn (9)
+                }
+
+TmnxIgmpGroupFilterMode ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxIgmpGroupFilterMode describes the filter-mode of
+         a group.
+
+         In 'include(1)' mode, reception of packets sent to the specified
+         multicast address is requested only from those IPv4 Source addresses
+         listed in the corresponding source-list.
+
+         In 'exclude(2)' mode, reception of packets sent to the given multicast
+         address is requested from all IPv4 Source addresses, except those
+         listed in the corresponding source-list (if any)."
+    SYNTAX INTEGER {
+                include (1),
+                exclude (2)
+            }
+
+TmnxIgmpGroupType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxIgmpGroupType describes how a multicast group is
+         learned."
+    SYNTAX  INTEGER {
+                static(1),
+                dynamic(2)
+            }
+
+TmnxIgmpVersion ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxIgmpVersion denotes the version of the IGMP protocol:
+         - 'version1(1)': means version 1 of the IGMP protocol
+         - 'version2(2)': means version 2 of the IGMP protocol
+         - 'version3(3)': means version 3 of the IGMP protocol."
+    SYNTAX  INTEGER {
+                version1(1),
+                version2(2),
+                version3(3)
+            }
+
+TmnxMldGroupFilterMode ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxMldGroupFilterMode describes the filter-mode of a
+         group.
+
+         In 'include(1)' mode, reception of packets sent to the specified
+         multicast address is requested only from those IPv6 source addresses
+         listed in the corresponding source-list.
+
+         In 'exclude(2)' mode, reception of packets sent to the given multicast
+         address is requested from all IPv6 source addresses, except those
+         listed in the corresponding source-list (if any)."
+    SYNTAX INTEGER {
+                include (1),
+                exclude (2)
+            }
+
+TmnxMldGroupType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxMldGroupType describes how a multicast group is
+         learned."
+    SYNTAX  INTEGER {
+                static(1),
+                dynamic(2)
+            }
+
+TmnxMldVersion ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxMldVersion denotes the version of the MLD protocol:
+         - 'version1(1)': means version 1 of the MLD protocol
+         - 'version2(2)': means version 2 of the MLD protocol"
+    SYNTAX  INTEGER {
+                version1(1),
+                version2(2)
+            }
+
+TmnxManagedRouteStatus ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxManagedRouteStatus denotes the status of a Managed Route."
+    SYNTAX
+           INTEGER {
+                installed           (0),
+                notYetInstalled     (1),
+                wrongAntiSpoofType  (2),
+                outOfMemory         (3),
+                shadowed            (4),
+                routeTableFull      (5),
+                parentInterfaceDown (6)
+           }
+
+-- 
+-- Textual conventions for GSMP
+--
+TmnxAncpString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The TmnxAncpString data type contains a valid ancp string."
+    SYNTAX OCTET STRING (SIZE (1..63))
+
+TmnxAncpStringOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The TmnxAncpStringOrZero data type contains a valid ancp string.
+        An empty string indicates that no ANCP string is defined."
+    SYNTAX OCTET STRING (SIZE (0..63))
+
+-- 
+-- Textual conventions for Multicast Address Family
+--
+
+TmnxMulticastAddrFamily ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The data type TmnxMulticastAddrFamily denotes the family for
+         multicast protocol."
+    SYNTAX      INTEGER {
+                    ipv4Multicast (0),
+                    ipv6Multicast (1)
+                }
+--
+-- Textual conventions for subscriber mgmt
+-- 
+
+TmnxSubIdentString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxSubIdentString denotes the subscriber
+         identification string."
+    SYNTAX OCTET STRING (SIZE (1..32))
+
+TmnxSubIdentStringOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxSubIdentStringOrEmpty denotes the subscriber
+         identification string. The empty string denotes the absence of a
+         subscriber identification string."
+    SYNTAX OCTET STRING (SIZE (0..32))
+
+TmnxSubProfileString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxSubProfileString denotes the subscriber
+         profile string."
+    SYNTAX OCTET STRING (SIZE (1..16))
+
+TmnxSubProfileStringOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxSubProfileStringOrEmpty denotes the subscriber
+         profile string. The empty string denotes the absence of a
+         subscriber profile."
+    SYNTAX OCTET STRING (SIZE (0..16))
+
+TmnxSlaProfileString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxSlaProfileString denotes the SLA 
+         profile string."
+    SYNTAX OCTET STRING (SIZE (1..16))
+
+TmnxSlaProfileStringOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxSlaProfileStringOrEmpty denotes the SLA
+         profile string. The empty string denotes the absence of a
+         SLA profile."
+    SYNTAX OCTET STRING (SIZE (0..16))
+
+TmnxAppProfileString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxAppProfileString denotes the application
+         profile string."
+    SYNTAX OCTET STRING (SIZE (1..16))
+
+TmnxAppProfileStringOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxAppProfileStringOrEmpty denotes the application
+         profile string. The empty string denotes the absence of a
+         application profile."
+    SYNTAX OCTET STRING (SIZE (0..16))
+
+TmnxSubMgtIntDestIdOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxSubMgtIntDestIdOrEmpty denotes the intermediate
+         destination id. The empty string denotes the absence of an
+         intermediate destination id."
+    SYNTAX OCTET STRING (SIZE (0..32))
+
+TmnxSubMgtIntDestId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxSubMgtIntDestId denotes the intermediate 
+         destination id."
+    SYNTAX OCTET STRING (SIZE (1..32))
+
+--
+-- Textual conventions for DHCP server
+--
+TmnxDhcpOptionType ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxDhcpOptionType represents how the value
+         of this option is encoded:
+         - 'ipv4 (1)': this option contains an IPv4 address (4 octets)
+         - 'ascii(2)': this option contains seven-bit ASCII characters
+         - 'hex  (3)': this option contains octets. It must be displayed in
+                       hexadecimal format because it contains non-printable
+                       characters."
+    SYNTAX  INTEGER {
+                ipv4(1),
+                ascii(2),
+                hex(3)
+            }
+
+TmnxDhcpVendorOption ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This value specifies what is encoded in the Alcatel vendor specific
+         sub-option of option 82."
+    SYNTAX  BITS {
+        systemId  (0),
+        clientMac (1),
+        serviceId (2),
+        sapId     (3)
+    }
+
+TmnxPppoeUserNameOrEmpty ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS  current
+    DESCRIPTION
+        "The data type TmnxPppoeUserNameOrEmpty denotes the PPPoE username."
+    SYNTAX OCTET STRING (SIZE (0..128))
+
+--
+-- Textual conventions for Security
+--
+TCpmProtPolicyID ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The data type TCpmProtPolicyID represents the identification number 
+         of a CPM Protection policy.
+        
+         The value '0' indicates that no CPM Protection policy is provisioned."
+    SYNTAX Unsigned32 (0..255)
+
+--
+-- Textual conventions for MLPPP QoS
+--
+TMlpppQoSProfileId ::=  TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "This textual-convention uniquely identifies MLPPP Bundle QoS
+        profile in the ingress and egress MLPPP QoS profile tables. 
+        The value 0 indicates default MLPPP QoS Profile as applicable to
+        a given H/W"
+    SYNTAX Unsigned32 (0..65535)
+
+END