Initial commitHEADmain

1 files changed, 497 insertions, 0 deletions

diff --git a/MIBS/nokia/aos7/ALCATEL-IND1-VLAN-MGR-MIB b/MIBS/nokia/aos7/ALCATEL-IND1-VLAN-MGR-MIB
new file mode 100644
index 0000000..cd26c65
--- /dev/null
+++ b/MIBS/nokia/aos7/ALCATEL-IND1-VLAN-MGR-MIB
@@ -0,0 +1,497 @@
+ALCATEL-IND1-VLAN-MGR-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        RowStatus, TEXTUAL-CONVENTION                   FROM SNMPv2-TC
+        SnmpAdminString                                 FROM SNMP-FRAMEWORK-MIB
+        MODULE-IDENTITY, OBJECT-IDENTITY,
+        OBJECT-TYPE, IpAddress, Integer32, Unsigned32   FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, OBJECT-GROUP                 FROM SNMPv2-CONF
+        softentIND1VlanMgt                              FROM ALCATEL-IND1-BASE;
+
+
+    alcatelIND1VLANMgrMIB MODULE-IDENTITY
+        LAST-UPDATED "200704030000Z"
+        ORGANIZATION "Alcatel-Lucent"
+        CONTACT-INFO
+            "Please consult with Customer Service to ensure the most appropriate
+             version of this document is used with the products in question:
+
+                        Alcatel-Lucent, Enterprise Solutions Division
+                       (Formerly Alcatel Internetworking, Incorporated)
+                               26801 West Agoura Road
+                            Agoura Hills, CA  91301-5122
+                              United States Of America
+
+            Telephone:               North America  +1 800 995 2696
+                                     Latin America  +1 877 919 9526
+                                     Europe         +31 23 556 0100
+                                     Asia           +65 394 7933
+                                     All Other      +1 818 878 4507
+
+            Electronic Mail:         support@ind.alcatel.com
+            World Wide Web:          http://alcatel-lucent.com/wps/portal/enterprise
+            File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"
+
+        DESCRIPTION
+            "This module describes an authoritative enterprise-specific Simple
+             Network Management Protocol (SNMP) Management Information Base (MIB):
+
+                 For the Birds Of Prey Product Line
+                 Vlan Manager for the distribution of vlan configuration information,
+                 including the association between vlans and ports.
+
+             The right to make changes in specification and other information
+             contained in this document without prior notice is reserved.
+
+             No liability shall be assumed for any incidental, indirect, special, or
+             consequential damages whatsoever arising from or related to this
+             document or the information contained herein.
+
+             Vendors, end-users, and other interested parties are granted
+             non-exclusive license to use this specification in connection with
+             management of the products for which it is intended to be used.
+
+                         Copyright (C) 1995-2007 Alcatel-Lucent
+                             ALL RIGHTS RESERVED WORLDWIDE"
+
+        REVISION      "200704030000Z"
+        DESCRIPTION
+            "The latest version of this MIB Module."
+        ::= { softentIND1VlanMgt 1}
+
+    alcatelIND1VLANMgrMIBObjects OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Branch For VLAN Manager
+            Subsystem Managed Objects."
+        ::= { alcatelIND1VLANMgrMIB 1 }
+
+
+    alcatelIND1VLANMgrMIBConformance OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Branch For VLAN Manager
+            Subsystem Conformance Information."
+        ::= { alcatelIND1VLANMgrMIB 2 }
+
+
+    alcatelIND1VLANMgrMIBGroups OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Branch For VLAN Manager
+            Subsystem Units Of Conformance."
+        ::= { alcatelIND1VLANMgrMIBConformance 1 }
+
+
+    alcatelIND1VLANMgrMIBCompliances OBJECT-IDENTITY
+        STATUS current
+        DESCRIPTION
+            "Branch For VLAN Manager
+            Subsystem Compliance Statements."
+        ::= { alcatelIND1VLANMgrMIBConformance 2 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    vlanMgrVlan  OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 1 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    vlanTable  OBJECT-TYPE
+        SYNTAX  SEQUENCE OF VlanEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+         "A list of Virtual LAN instances in this device."
+        ::= { vlanMgrVlan 1 }
+
+    vlanEntry  OBJECT-TYPE
+        SYNTAX  VlanEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+         "A VLAN entry."
+        INDEX { vlanNumber }
+        ::= { vlanTable 1 }
+
+    VlanEntry ::= SEQUENCE {
+            vlanNumber
+                Integer32,
+            vlanDescription
+                SnmpAdminString,
+            vlanAdmStatus
+                INTEGER,
+            vlanOperStatus
+                INTEGER,
+            vlanStatus
+                RowStatus,
+            vlanRouterStatus
+                INTEGER,
+            vlanSrcLearningStatus
+                INTEGER,
+            vlanType
+                INTEGER,
+            vlanMtu
+                Integer32,
+            vlanAfdCfg
+                Integer32
+    }
+
+    vlanNumber  OBJECT-TYPE
+        SYNTAX  Integer32 (1..4094)
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "The VLAN number identifying this instance. Valid
+             range from 1 to 4094."
+        ::= { vlanEntry 1 }
+
+    vlanDescription  OBJECT-TYPE
+        SYNTAX  SnmpAdminString (SIZE (0..32))
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "Textual description of the VLAN instance."
+        ::= { vlanEntry 2 }
+
+    vlanAdmStatus  OBJECT-TYPE
+        SYNTAX  INTEGER {
+            enabled(1),
+            disabled(2)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "The administrative status which can be set by
+             configuration. Disable(1) will disable ALL vports
+             that are connected to this VLAN, enable(2) will enable
+             ALL ports on this VLAN, delete(3) will detach and
+             delete the ports/routers AND remove the VLAN."
+        DEFVAL { enabled }
+        ::= { vlanEntry 3 }
+
+    vlanOperStatus  OBJECT-TYPE
+        SYNTAX  INTEGER {
+            active(1),
+            inactive(2)
+        }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Provide operating status of a particular VLAN environment."
+        DEFVAL { inactive }
+        ::= { vlanEntry 4 }
+
+     vlanStatus  OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "Row status to control creation/deletion of vlans."
+        ::= { vlanEntry 5 }
+
+    vlanRouterStatus  OBJECT-TYPE
+        SYNTAX  INTEGER {
+            none(0),
+            ipv4router(1),
+            ipv6router(2),
+            both(3)
+        }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Indicates if any IP routers are configured on this vlan."
+        DEFVAL { none }
+        ::= { vlanEntry 6 }
+
+    vlanSrcLearningStatus  OBJECT-TYPE
+        SYNTAX  INTEGER {
+            enabled(1),
+            disabled(2)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "Indicates whether the mac learning is enabled or disabled
+             on this vlan."
+        DEFVAL { enabled }
+        ::= { vlanEntry 7 }
+
+    vlanType  OBJECT-TYPE
+        SYNTAX  INTEGER {
+            invalid(0),
+            service(1),
+            multicastEnt(2),
+            multicastService(3),
+            dynamic(4),
+            standard(5),
+            ipc(6),
+	    vipVlan(7),
+	    erpVlan(8),
+	    mtpVlan(9),
+            unpDynamic(10),
+            dynamicRemote(11),
+            bvlan(12),
+            controlBvlan(13),
+            evbVlan(14),
+            vcmipc(15),
+            fcoeVlan(16),
+            openflowVlan(17),
+            routerVlan(18),
+            primaryVlan(19),
+            isolatedVlan(20),
+            communityVlan(21),
+            allVlan(22),
+            invalidVlan(23)
+	
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "The type of the vlan"
+        DEFVAL { standard }
+        ::= { vlanEntry 8 }
+
+    vlanMtu  OBJECT-TYPE
+        SYNTAX  Integer32 (512..10222)
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "Maximum transmission unit i.e. the maximum size of packet that this
+             vlan can handle. It ranges from 512 to 1500 (for OS6XXX) and 10222
+             (for OS7XXX and OS8XXX) with e2 encapsulation.With snap encapsulation
+             it ranges from 512 to 1492"
+        DEFVAL { 1500 }
+        ::= { vlanEntry 9 }
+
+    vlanAfdCfg  OBJECT-TYPE
+        SYNTAX  Integer32 (1..2)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+             "Specifies whether config was generated by AFD or user, 1 specifies user config and 
+              2 specifies afd config"
+        DEFVAL { 1 }
+        ::= { vlanEntry 10 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    vlanMgrVpa  OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 2 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    vpaTable  OBJECT-TYPE
+        SYNTAX  SEQUENCE OF VpaEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A list of Virtual LAN instances in this device."
+        ::= { vlanMgrVpa 1 }
+
+    vpaEntry  OBJECT-TYPE
+        SYNTAX  VpaEntry
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "A VLAN-Port Association (VPA) entry."
+        INDEX { vpaVlanNumber, vpaIfIndex }
+        ::= { vpaTable 1 }
+
+    VpaEntry ::= SEQUENCE {
+           vpaVlanNumber
+               Integer32,
+           vpaIfIndex
+               Unsigned32,
+           vpaType
+               INTEGER,
+           vpaState
+               INTEGER,
+           vpaStatus
+               RowStatus
+    }
+
+    vpaVlanNumber  OBJECT-TYPE
+        SYNTAX  Integer32 (1..4094)
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "The VLAN number component of this instance. Valid
+             range from 1 to 4094."
+        ::= { vpaEntry 1 }
+
+    vpaIfIndex  OBJECT-TYPE
+        SYNTAX  Unsigned32 (1001..4294967295)
+        MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+            "The ifIndex component of this instance."
+        ::= {vpaEntry 2 }
+
+    vpaType  OBJECT-TYPE
+        SYNTAX  INTEGER {
+            invalid(0),
+            cfgDefault(1),
+            qTagged(2),
+            dynamic(3),
+            vstkDoubleTag(4),
+            vstkTranslate(5),
+            forbidden(6),
+            mirrored(7),
+            bvpa(8),
+            unpUntagged(9),
+            unpTagged(10),
+            evbTagged(11)
+        }
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "The type of this vpa.  Two are statically configured:
+             configured default VPA and qTagged VPA.
+             The other two are dynamically created according to rules/policies:
+             dynamic default and mobile.  The dynamic default VPA is the
+             same as a mobile VPA except that it also the default VPA for the port."
+        DEFVAL { cfgDefault }
+        ::= { vpaEntry 3 }
+
+    vpaState  OBJECT-TYPE
+        SYNTAX  INTEGER {
+	    forwarding(0),
+	    blocking(1),
+	    inactive(2),
+	    invalid(3),
+	    dhlBlocking(4)
+        }
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "The state of this vpa:
+                1. inactive   - link down
+                2. blocking   - link up, forwarding down
+                3. forwarding - link up, forwarding up, sources learned normally
+                4. filtering  - link up, forwarding up, sources filtered
+                5. DHL Blocking - link up, forwarding down for a DHL port."
+        DEFVAL { inactive }
+        ::= { vpaEntry 4 }
+
+    vpaStatus  OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS  read-create
+        STATUS  current
+        DESCRIPTION
+            "This is used to create or delete staticPrimary VPAs (default vlans
+             on a port ).  Creation replaces the existing staticPrimary VPA
+             while deletion replaces the existing VPA so that the vlan number
+             is 1 for the given port.  Of course the corresponding vlan and
+             port must exist."
+        ::= { vpaEntry 5 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    vlanMgrVlanSet  OBJECT IDENTIFIER ::= { alcatelIND1VLANMgrMIBObjects 3 }
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    vlanSetVlanCount  OBJECT-TYPE
+        SYNTAX  Integer32 (1..4094)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Count of existing VLANs on switch."
+        ::= { vlanMgrVlanSet 1 }
+
+    vlanSetDynamicVlanCount  OBJECT-TYPE
+        SYNTAX  Integer32 (0..4094)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Count of number of dynamic vlans in the system"
+        ::= { vlanMgrVlanSet 2 }
+
+    vlanSetIpRouterCount  OBJECT-TYPE
+        SYNTAX  Integer32 (0..4094)
+        MAX-ACCESS  read-only
+        STATUS  current
+        DESCRIPTION
+            "Count of VLANs on switch with IP router port configured."
+        ::= { vlanMgrVlanSet 3 }
+
+    vlanSetVstkVlanCount  OBJECT-TYPE
+	SYNTAX  Integer32 (0..4094)
+	MAX-ACCESS  read-only
+	STATUS  current
+	DESCRIPTION
+	    "Count of Vlan Stacking vlans in the system"
+	::= { vlanMgrVlanSet 4 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+-- COMPLIANCE
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    alcatelIND1VLANMgrMIBCompliance MODULE-COMPLIANCE
+        STATUS  current
+        DESCRIPTION
+            "Compliance statement for
+             VLAN Manager."
+        MODULE
+            MANDATORY-GROUPS
+            {
+                vlanMgrVlanGroup,
+                vlanMgrVpaGroup,
+                vlanMgrVlanSetGroup
+            }
+
+        ::= { alcatelIND1VLANMgrMIBCompliances 1 }
+
+
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+-- UNITS OF CONFORMANCE
+-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+    vlanMgrVlanGroup OBJECT-GROUP
+        OBJECTS
+        {
+            vlanDescription,
+            vlanAdmStatus,
+            vlanOperStatus,
+            vlanStatus,
+            vlanRouterStatus,
+            vlanSrcLearningStatus,
+            vlanType,
+            vlanMtu,
+            vlanAfdCfg
+        }
+        STATUS  current
+        DESCRIPTION
+            "Collection of objects for management of Vlan Manager VLANs."
+        ::= { alcatelIND1VLANMgrMIBGroups 1 }
+
+
+    vlanMgrVpaGroup OBJECT-GROUP
+        OBJECTS
+        {
+            vpaType,
+            vpaState,
+            vpaStatus
+        }
+        STATUS  current
+        DESCRIPTION
+            "Collection of objects for management of Vlan Manager VPAs."
+        ::= { alcatelIND1VLANMgrMIBGroups 2 }
+
+    vlanMgrVlanSetGroup OBJECT-GROUP
+        OBJECTS
+        {
+           vlanSetVlanCount,
+           vlanSetDynamicVlanCount,
+           vlanSetIpRouterCount,
+           vlanSetVstkVlanCount
+        }
+        STATUS current
+        DESCRIPTION
+            "Collection of objects for Vlan Manager global properties."
+        ::= { alcatelIND1VLANMgrMIBGroups 3 }
+
+END
+