Initial commitHEADmain

1 files changed, 310 insertions, 0 deletions

diff --git a/MIBS/quanta/radius_auth_client.my b/MIBS/quanta/radius_auth_client.my
new file mode 100644
index 0000000..2278379
--- /dev/null
+++ b/MIBS/quanta/radius_auth_client.my
@@ -0,0 +1,310 @@
+RADIUS-AUTH-CLIENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+       MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+       Counter32, Integer32, Gauge32,
+       IpAddress, TimeTicks, mib-2      FROM SNMPv2-SMI
+       SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
+       MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;
+
+radiusAuthClientMIB MODULE-IDENTITY
+       LAST-UPDATED "9906110000Z" -- 11 Jun 1999
+       ORGANIZATION "Netgear Inc"
+       CONTACT-INFO ""
+       DESCRIPTION
+             "The MIB module for entities implementing the client
+              side of the Remote Access Dialin User Service (RADIUS)
+              authentication protocol."
+       REVISION "9906110000Z"    -- 11 Jun 1999
+       DESCRIPTION "Initial version as published in RFC 2618"
+       ::= { radiusAuthentication 2 }
+
+radiusMIB OBJECT-IDENTITY
+       STATUS  current
+       DESCRIPTION
+             "The OID assigned to RADIUS MIB work by the IANA."
+        ::= { mib-2 67 }
+
+radiusAuthentication  OBJECT IDENTIFIER ::= {radiusMIB 1}
+
+radiusAuthClientMIBObjects     OBJECT IDENTIFIER ::=
+                                               { radiusAuthClientMIB 1 }
+
+radiusAuthClient  OBJECT IDENTIFIER ::= { radiusAuthClientMIBObjects 1 }
+
+radiusAuthClientInvalidServerAddresses OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Response packets
+             received from unknown addresses."
+      ::= { radiusAuthClient 1 }
+
+radiusAuthClientIdentifier OBJECT-TYPE
+      SYNTAX SnmpAdminString
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+             "The NAS-Identifier of the RADIUS authentication client.
+              This is not necessarily the same as sysName in MIB II."
+      ::= { radiusAuthClient 2 }
+
+radiusAuthServerTable OBJECT-TYPE
+      SYNTAX     SEQUENCE OF RadiusAuthServerEntry
+      MAX-ACCESS not-accessible
+
+      STATUS     current
+      DESCRIPTION
+            "The (conceptual) table listing the RADIUS authentication
+             servers with which the client shares a secret."
+      ::= { radiusAuthClient 3 }
+
+radiusAuthServerEntry OBJECT-TYPE
+      SYNTAX     RadiusAuthServerEntry
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+            "An entry (conceptual row) representing a RADIUS
+             authentication server with which the client shares
+             a secret."
+      INDEX      { radiusAuthServerIndex }
+      ::= { radiusAuthServerTable 1 }
+
+RadiusAuthServerEntry ::= SEQUENCE {
+      radiusAuthServerIndex                           Integer32,
+      radiusAuthServerAddress                         IpAddress,
+      radiusAuthClientServerPortNumber                Integer32,
+      radiusAuthClientRoundTripTime                   TimeTicks,
+      radiusAuthClientAccessRequests                  Counter32,
+      radiusAuthClientAccessRetransmissions           Counter32,
+      radiusAuthClientAccessAccepts                   Counter32,
+      radiusAuthClientAccessRejects                   Counter32,
+      radiusAuthClientAccessChallenges                Counter32,
+      radiusAuthClientMalformedAccessResponses        Counter32,
+      radiusAuthClientBadAuthenticators               Counter32,
+      radiusAuthClientPendingRequests                   Gauge32,
+      radiusAuthClientTimeouts                        Counter32,
+      radiusAuthClientUnknownTypes                    Counter32,
+      radiusAuthClientPacketsDropped                  Counter32
+}
+
+radiusAuthServerIndex OBJECT-TYPE
+      SYNTAX     Integer32 (1..2147483647)
+      MAX-ACCESS not-accessible
+      STATUS     current
+      DESCRIPTION
+             "A number uniquely identifying each RADIUS
+             Authentication server with which this client
+             communicates."
+      ::= { radiusAuthServerEntry 1 }
+
+radiusAuthServerAddress OBJECT-TYPE
+      SYNTAX     IpAddress
+      MAX-ACCESS read-only
+
+      STATUS     current
+      DESCRIPTION
+            "The IP address of the RADIUS authentication server
+             referred to in this table entry."
+      ::= { radiusAuthServerEntry 2 }
+
+radiusAuthClientServerPortNumber  OBJECT-TYPE
+      SYNTAX Integer32 (0..65535)
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The UDP port the client is using to send requests to
+             this server."
+      ::= { radiusAuthServerEntry 3 }
+
+radiusAuthClientRoundTripTime  OBJECT-TYPE
+      SYNTAX TimeTicks
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The time interval (in hundredths of a second) between
+             the most recent Access-Reply/Access-Challenge and the
+             Access-Request that matched it from this RADIUS
+             authentication server."
+      ::= { radiusAuthServerEntry 4 }
+
+-- Request/Response statistics
+--
+-- TotalIncomingPackets = Accepts + Rejects + Challenges + UnknownTypes
+--
+-- TotalIncomingPackets - MalformedResponses - BadAuthenticators -
+-- UnknownTypes - PacketsDropped = Successfully received
+--
+-- AccessRequests + PendingRequests + ClientTimeouts =
+-- Successfully Received
+--
+--
+
+radiusAuthClientAccessRequests OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets sent
+             to this server. This does not include retransmissions."
+      ::= { radiusAuthServerEntry 5 }
+
+radiusAuthClientAccessRetransmissions OBJECT-TYPE
+
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets
+             retransmitted to this RADIUS authentication server."
+      ::= { radiusAuthServerEntry 6 }
+
+radiusAuthClientAccessAccepts OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Accept packets
+             (valid or invalid) received from this server."
+      ::= { radiusAuthServerEntry 7 }
+
+radiusAuthClientAccessRejects OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Reject packets
+             (valid or invalid) received from this server."
+      ::= { radiusAuthServerEntry  8 }
+
+radiusAuthClientAccessChallenges OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Challenge packets
+             (valid or invalid) received from this server."
+      ::= { radiusAuthServerEntry 9 }
+
+-- "Access-Response" includes an Access-Accept, Access-Challenge
+-- or Access-Reject
+
+radiusAuthClientMalformedAccessResponses OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of malformed RADIUS Access-Response
+             packets received from this server.
+             Malformed packets include packets with
+             an invalid length. Bad authenticators or
+             Signature attributes or unknown types are not
+
+             included as malformed access responses."
+      ::= { radiusAuthServerEntry 10 }
+
+radiusAuthClientBadAuthenticators OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Response packets
+             containing invalid authenticators or Signature
+             attributes received from this server."
+      ::= { radiusAuthServerEntry 11 }
+
+radiusAuthClientPendingRequests OBJECT-TYPE
+      SYNTAX Gauge32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS Access-Request packets
+             destined for this server that have not yet timed out
+             or received a response. This variable is incremented
+             when an Access-Request is sent and decremented due to
+             receipt of an Acess-Accept, Access-Reject or
+             Access-Challenge, a timeout or retransmission."
+      ::= { radiusAuthServerEntry 12 }
+
+radiusAuthClientTimeouts OBJECT-TYPE
+     SYNTAX Counter32
+     MAX-ACCESS read-only
+     STATUS current
+     DESCRIPTION
+            "The number of authentication timeouts to this server.
+             After a timeout the client may retry to the same
+             server, send to a different server, or
+             give up. A retry to the same server is counted as a
+             retransmit as well as a timeout. A send to a different
+             server is counted as a Request as well as a timeout."
+      ::= { radiusAuthServerEntry  13 }
+
+radiusAuthClientUnknownTypes OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets of unknown type which
+             were received from this server on the authentication port."
+      ::= { radiusAuthServerEntry  14 }
+
+radiusAuthClientPacketsDropped OBJECT-TYPE
+      SYNTAX Counter32
+      MAX-ACCESS read-only
+      STATUS current
+      DESCRIPTION
+            "The number of RADIUS packets of which were
+             received from this server on the authentication port
+             and dropped for some other reason."
+      ::= { radiusAuthServerEntry  15 }
+
+-- conformance information
+
+radiusAuthClientMIBConformance
+             OBJECT IDENTIFIER ::= { radiusAuthClientMIB 2 }
+radiusAuthClientMIBCompliances
+             OBJECT IDENTIFIER ::= { radiusAuthClientMIBConformance 1 }
+radiusAuthClientMIBGroups
+             OBJECT IDENTIFIER ::= { radiusAuthClientMIBConformance 2 }
+
+-- compliance statements
+
+radiusAuthClientMIBCompliance MODULE-COMPLIANCE
+     STATUS  current
+     DESCRIPTION
+           "The compliance statement for authentication clients
+            implementing the RADIUS Authentication Client MIB."
+     MODULE  -- this module
+            MANDATORY-GROUPS { radiusAuthClientMIBGroup }
+
+     ::= { radiusAuthClientMIBCompliances 1 }
+
+-- units of conformance
+
+radiusAuthClientMIBGroup OBJECT-GROUP
+     OBJECTS { radiusAuthClientIdentifier,
+               radiusAuthClientInvalidServerAddresses,
+               radiusAuthServerAddress,
+               radiusAuthClientServerPortNumber,
+               radiusAuthClientRoundTripTime,
+               radiusAuthClientAccessRequests,
+               radiusAuthClientAccessRetransmissions,
+               radiusAuthClientAccessAccepts,
+               radiusAuthClientAccessRejects,
+               radiusAuthClientAccessChallenges,
+               radiusAuthClientMalformedAccessResponses,
+
+               radiusAuthClientBadAuthenticators,
+               radiusAuthClientPendingRequests,
+               radiusAuthClientTimeouts,
+               radiusAuthClientUnknownTypes,
+               radiusAuthClientPacketsDropped
+            }
+     STATUS  current
+     DESCRIPTION
+           "The basic collection of objects providing management of
+            RADIUS Authentication Clients."
+     ::= { radiusAuthClientMIBGroups 1 }
+
+END