Initial commitHEADmain

1 files changed, 292 insertions, 0 deletions

diff --git a/MIBS/raisecom/RAISECOM-FANMONITOR-MIB b/MIBS/raisecom/RAISECOM-FANMONITOR-MIB
new file mode 100644
index 0000000..1e7aea3
--- /dev/null
+++ b/MIBS/raisecom/RAISECOM-FANMONITOR-MIB
@@ -0,0 +1,292 @@
+-- MibName=raisecomSynce

+-- *****************************************************************

+-- Version 1.0 Created 2010.12.30 by hongding

+-- This version of MIB is created just for the Management of fan .

+--

+-- Copyright(c) 2002-2012 by RAISECOM TECH, Ltd. 

+-- All rights reserved.

+--

+-- modify history 

+-- 01,20120418,yangzhonghong, ITS00020700,change the enum values of the raisecomFanCardState node  

+-- 01,20121206,guokai, ESW00006977,add raisecomFanMonitorTrapSendEnable

+-- *****************************************************************

+RAISECOM-FANMONITOR-MIB  DEFINITIONS ::= BEGIN

+

+IMPORTS

+        raisecomSystem

+            FROM RAISECOM-SYSTEM-MIB     

+          TruthValue

+              FROM SNMPv2-TC

+        Integer32,Unsigned32,Counter32                         

+        	FROM SNMPv2-SMI;

+

+	raisecomFanMonitor MODULE-IDENTITY

+        LAST-UPDATED    "201012270000Z"

+        ORGANIZATION    "Raisecom, Inc."

+        CONTACT-INFO

+                "       Raise Systems

+

+                Postal: Beijing,

+                        China

+

+                   Tel: 86-010-82884499

+

+                E-mail: support@raisecom.com"

+        DESCRIPTION

+                "Configuration of fanMonitor object." 

+-- -------------------------------------------------------------

+-- modify history

+-- -------------------------------------------------------------       

+        REVISION    "201012300000Z"

+        DESCRIPTION "The initial revision of this MIB."

+                ::= { raisecomSystem 5}         

+

+-- -------------------------------------------------------------

+-- groups in the raisecomFanMonitor MIB

+-- -------------------------------------------------------------

+raisecomFanMonitorNotification  OBJECT IDENTIFIER ::= { raisecomFanMonitor 1 }  

+raisecomFanMonitorMibObjects    OBJECT IDENTIFIER ::= { raisecomFanMonitor 2 }  

+

+-- -------------------------------------------------------------

+-- raisecomFanMonitorNotification

+-- -------------------------------------------------------------    

+    raisecomFanSpeedNormal NOTIFICATION-TYPE

+        OBJECTS { raisecomFanIndex,

+                  raisecomFanSpeedValue

+                }

+        STATUS current

+        DESCRIPTION

+                "The trap notification occur when fan state translating from abnormal to normal."            

+        ::= { raisecomFanMonitorNotification 1 }  

+        

+	raisecomFanSpeedAbnormal NOTIFICATION-TYPE

+        OBJECTS { raisecomFanIndex,

+                  raisecomFanSpeedValue,

+                  raisecomFanSpeedDueValue

+                }

+        STATUS current

+        DESCRIPTION

+                "The trap notification occur when fan state translatingfrom normal to abnormal."

+        ::= { raisecomFanMonitorNotification 2 }    

+        

+    raisecomFanCardUp NOTIFICATION-TYPE

+        OBJECTS { raisecomFanCardState }

+        STATUS current

+        DESCRIPTION

+                "The trap notification occur when fan card state translating from down to up."

+        ::= { raisecomFanMonitorNotification 3 }    

+        

+    raisecomFanCardDown NOTIFICATION-TYPE

+        OBJECTS { raisecomFanCardState }

+        STATUS current

+        DESCRIPTION

+                "The trap notification occur when fan card state translating from up to down."

+        ::= { raisecomFanMonitorNotification 4 } 

+-- -------------------------------------------------------------

+-- raisecomFanMonitorMibObjects

+-- -------------------------------------------------------------  

+raisecomFanMonitorGlobalGroup   OBJECT IDENTIFIER ::= { raisecomFanMonitorMibObjects 1 }   

+

+-- -------------------------------------------------------------

+-- raisecomFanMonitorGlobalGroup

+-- -------------------------------------------------------------          

+    raisecomFanMonitorMode OBJECT-TYPE

+        SYNTAX	INTEGER

+        {

+        	enforce(1),

+    		auto(2)     	

+        }

+        MAX-ACCESS  read-write

+        STATUS      current

+        DESCRIPTION

+           	"An integer value that specify the current monitor mode.

+           	ENFORCE(1) means that the fan speed need to set manully;

+           	AUTO(2) means that the fan speed will ajusted autoly according 

+           	to the temperature"

+        ::= { raisecomFanMonitorGlobalGroup 1 } 

+        

+	raisecomFanMonitorSpdLevel OBJECT-TYPE

+        SYNTAX	Unsigned32(1..4)

+        MAX-ACCESS  read-write

+        STATUS      current

+        DESCRIPTION

+           	"Specify the speed level of fan in enforce mode."  

+        ::= { raisecomFanMonitorGlobalGroup 2 }

+        

+	raisecomFanMonitorNumber OBJECT-TYPE

+        SYNTAX	Unsigned32

+        MAX-ACCESS  read-only

+        STATUS      current

+        DESCRIPTION

+           	"Specify the number of fan being monitorred."  

+        ::= { raisecomFanMonitorGlobalGroup 3 } 

+        

+	raisecomFanMonitorLevlNumber OBJECT-TYPE

+        SYNTAX	Unsigned32

+        MAX-ACCESS  read-only

+        STATUS      current

+        DESCRIPTION

+           	"Specify the total number of fan speed levels."  

+        ::= { raisecomFanMonitorGlobalGroup 4 }

+

+      

+    raisecomFanCardState OBJECT-TYPE  

+        SYNTAX	INTEGER

+        {

+        	all-down(1),

+        	all-up(2),

+    		card1-up(3),

+    		card2-up(4)    		     	

+        }

+        MAX-ACCESS  read-only        

+        STATUS      current

+        DESCRIPTION

+           	"Specify the current state of fan cards.

+			 all_down(1) means that all fan cards are down;

+			 all_up(2) means that all fan cards are up;

+			 card1_up(3) means that fan card 1 is up, the others are down;

+			 card2_up(4) means that fan card 2 is up, the others are down." 

+        ::= { raisecomFanMonitorGlobalGroup 5 }

+        

+    raisecomFanCardSerialNumber OBJECT-TYPE  

+        SYNTAX  OCTET STRING

+        MAX-ACCESS  read-only        

+        STATUS      current

+        DESCRIPTION

+           	"specify the identical serial number of current fan card,this 

+           	string number will be set when device leaving factory" 

+        ::= { raisecomFanMonitorGlobalGroup 6 }   

+        

+   raisecomFanMonitorTrapSendEnable  OBJECT-TYPE 

+	SYNTAX   INTEGER  

+	 { 

+	     disable(0), 

+	     enable (1)

+	 }

+	MAX-ACCESS  read-write

+    STATUS      current

+    DESCRIPTION

+            "Specifies the status of sending trap"  

+   ::= {raisecomFanMonitorGlobalGroup  7 }        

+                        

+-- -------------------------------------------------------------

+-- raisecomFanMonitorStateTable

+-- -------------------------------------------------------------

+    raisecomFanMonitorStateTable OBJECT-TYPE

+        SYNTAX SEQUENCE OF RaisecomFanMonitorStateEntry

+        MAX-ACCESS not-accessible

+        STATUS current

+        DESCRIPTION

+            "Fan monitor state table."

+        ::= { raisecomFanMonitorMibObjects 2 }

+

+    raisecomFanMonitorStateEntry OBJECT-TYPE

+        SYNTAX RaisecomFanMonitorStateEntry

+        MAX-ACCESS not-accessible

+        STATUS current

+        DESCRIPTION

+            "Fan monitor state entry."

+        INDEX { raisecomFanIndex }

+        ::= { raisecomFanMonitorStateTable 1 }

+

+    RaisecomFanMonitorStateEntry ::= SEQUENCE {

+        raisecomFanIndex               Unsigned32,

+        raisecomFanSpeedValue          Unsigned32,

+        raisecomFanWorkState            INTEGER,

+        raisecomFanSpeedCurrentLevel   Unsigned32  

+    }

+    

+    raisecomFanIndex OBJECT-TYPE

+        SYNTAX  Unsigned32  

+        MAX-ACCESS not-accessible

+        STATUS current

+        DESCRIPTION

+            "Specify the sequence number of fan."

+        ::= { raisecomFanMonitorStateEntry 1 } 

+        

+    raisecomFanSpeedValue OBJECT-TYPE

+        SYNTAX  Unsigned32

+	    MAX-ACCESS read-only

+        STATUS current

+        DESCRIPTION

+            "Specify the actural speed of the current fan."

+        ::= { raisecomFanMonitorStateEntry 2 }

+    

+    raisecomFanWorkState OBJECT-TYPE

+        SYNTAX  INTEGER

+		{

+			normal(1),

+			abnormal(2)

+		}

+        MAX-ACCESS read-only

+        STATUS current

+        DESCRIPTION

+            "Specify the current state of fan

+            normal(1) means the current fan operate normally;

+            abnormal(2) means the current fan operate abnormally"

+        ::= { raisecomFanMonitorStateEntry 3 }    

+        

+     raisecomFanSpeedCurrentLevel OBJECT-TYPE

+        SYNTAX  Unsigned32(1..4)

+        MAX-ACCESS read-only

+        STATUS current

+        DESCRIPTION

+            "Specify the temperature scale border that match the speed levle,

+            based on this scale border,the current fan speed will ajusted autoly

+            according to the current temperature" 

+        ::= { raisecomFanMonitorStateEntry 4 }           

+-- -------------------------------------------------------------

+-- raisecomFanSpeedLevelTable

+-- -------------------------------------------------------------

+    raisecomFanSpeedLevelTable OBJECT-TYPE

+        SYNTAX SEQUENCE OF RaisecomFanSpeedLevelEntry

+        MAX-ACCESS not-accessible

+        STATUS current

+        DESCRIPTION

+            "fan speed level information table."

+        ::= { raisecomFanMonitorMibObjects 3 }

+

+    raisecomFanSpeedLevelEntry OBJECT-TYPE

+        SYNTAX RaisecomFanSpeedLevelEntry

+        MAX-ACCESS not-accessible

+        STATUS current

+        DESCRIPTION

+            "fan speed level information entry."

+        INDEX { raisecomFanSpeedLevelIndex }

+        ::= { raisecomFanSpeedLevelTable 1 }

+

+    RaisecomFanSpeedLevelEntry ::= SEQUENCE { 

+        raisecomFanSpeedLevelIndex              Unsigned32,

+        raisecomFanSpeedDueValue               Unsigned32,

+        raisecomFanSpeedTemperatureScale       Unsigned32

+    }

+        

+    raisecomFanSpeedLevelIndex OBJECT-TYPE

+        SYNTAX  Unsigned32

+        MAX-ACCESS not-accessible

+        STATUS current

+        DESCRIPTION

+            "Specify the fan speed level index."  

+        ::= { raisecomFanSpeedLevelEntry 1 }    

+    

+    raisecomFanSpeedDueValue OBJECT-TYPE

+        SYNTAX  Unsigned32

+        MAX-ACCESS read-only

+        STATUS current

+        DESCRIPTION

+            "Specify the speed value that match the fan levle index.

+            this value can ben get from a new or normal fan ,not an used

+            fan ,because the used fan may be aged" 

+        ::= { raisecomFanSpeedLevelEntry 2 }   

+ 

+     raisecomFanSpeedTemperatureScale OBJECT-TYPE

+        SYNTAX  Unsigned32(45..75)

+        MAX-ACCESS read-write

+        STATUS current

+        DESCRIPTION

+            "Specify the temperature scale border that match the speed levle,

+            based on this scale border,the current fan speed will ajusted autoly

+            according to the current temperature" 

+        ::= { raisecomFanSpeedLevelEntry 3 }    

+                 

+END