Initial commitHEADmain

1 files changed, 156 insertions, 0 deletions

diff --git a/MIBS/siae/SIAE-SAFE-MODE-MIB b/MIBS/siae/SIAE-SAFE-MODE-MIB
new file mode 100644
index 0000000..14e5f7b
--- /dev/null
+++ b/MIBS/siae/SIAE-SAFE-MODE-MIB
@@ -0,0 +1,156 @@
+-- ----------------------------------------------------------------------------
+--
+--  SIAE MICROELETTRONICA s.p.a.
+--
+--  Via Michelangelo Buonarroti, 21
+--  20093 - Cologno Monzese
+--  Milano
+--  ITALY
+--
+-- ----------------------------------------------------------------------------
+-- ----------------------------------------------------------------------------
+
+SIAE-SAFE-MODE-MIB
+        DEFINITIONS ::= BEGIN
+
+        IMPORTS
+             MODULE-IDENTITY, OBJECT-TYPE, IpAddress
+        FROM SNMPv2-SMI
+             DisplayString
+        FROM SNMPv2-TC
+             siaeMib
+        FROM SIAE-TREE-MIB
+             AlarmStatus, AlarmSeverityCode
+        FROM SIAE-ALARM-MIB;
+
+    safeMode MODULE-IDENTITY
+        LAST-UPDATED "201603100000Z"
+        ORGANIZATION "SIAE MICROELETTRONICA spa"
+        CONTACT-INFO
+            "SIAE MICROELETTONICA s.p.a.
+             Via Michelangelo Buonarroti, 21
+             20093 - Cologno Monzese
+             Milano - ITALY
+             Phone :  +39-02-27325-1
+             E-mail: help.help@siaemic.com
+            "
+        DESCRIPTION
+            "Management information for safe mode.
+            "
+        REVISION "201603100000Z"
+        DESCRIPTION
+            "Initial version 01.00.00
+            "
+    ::= { siaeMib 99 }
+
+----------------------------------------------------------------------------------
+--  Safe Mode
+----------------------------------------------------------------------------------
+--
+--  This MIB describes alarms and control parameters to manage the safe mode.
+--  Safe mode is a feature to recover situations where a software failure loop
+--  is detected: in these cases the equipment try to exit from the loop enabling
+--  less features. After exiting this failure loop the equipment will be in a
+--  safe mode status; when only auxiliary features are disable the recovery can
+--  be done by remote using equipment IP address and equipment credentials; 
+--  when more features are disabled the recovery can be done 
+--  only in site with rescue credentials and rescue IP address.
+----------------------------------------------------------------------------------
+
+------ Beginning --------------------------------------------------------------
+
+    safeModeMibVersion  OBJECT-TYPE
+        SYNTAX      INTEGER
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Numerical version of this module.
+             The string version of this MIB have the following format:
+                XX.YY.ZZ
+             so, for example, the value 1 should be interpreted as 00.00.01
+             and the value 10001 should be interpreted as 01.00.01."
+    ::= {safeMode 1}
+
+    safeModeAlarm  OBJECT-TYPE
+        SYNTAX      AlarmStatus
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Safe mode alarm with associated severity. This object
+             indicates that the equipment is in safe mode.
+            "
+    ::= {safeMode 2}
+
+    safeModeAlarmSeverityCode  OBJECT-TYPE
+        SYNTAX      AlarmSeverityCode
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Defines the severity associated to the safeModeAlarm
+             and enables/disables the trap generation on status change event.
+            "
+        DEFVAL {minorTrapEnable}
+    ::= {safeMode 3}
+
+    safeModeStatus OBJECT-TYPE
+        SYNTAX      INTEGER {
+                             safeModeStatusInactive     (1),
+                             safeModeStatusNoAuxService (2),
+                             safeModeStatusLinkMngmt    (3),
+                             safeModeStatusSiteMngmt    (4),
+                             safeModeStatusSiteDefault  (5),
+                             safeModeStatusSiteRescue   (6)
+                            }
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "The safe mode status of the equipment.
+             Equipment in normal-mode has safe mode status inactive"
+    ::= {safeMode 4}
+
+    safeModeRescueAdminStatus   OBJECT-TYPE
+        SYNTAX      INTEGER {
+                             disable (1),
+                             enable  (2)
+                            }
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object enables or disables the site-rescue ."
+        DEFVAL {enable}
+    ::= {safeMode 5}
+
+    safeModeRescuePwd  OBJECT-TYPE
+        SYNTAX      DisplayString    (SIZE(1..31))
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "This object specifies the login password of the rescue
+             user."
+    ::= {safeMode 6}
+
+    safeModeRescueIpAddress  OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "Ip address of the equipment in status site-rescue"
+        DEFVAL { 'ac14fd0d'H }  -- 172.20.253.13
+    ::= {safeMode 7}
+
+    safeModeRescueIpNetMask  OBJECT-TYPE
+        SYNTAX      IpAddress
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+            "The subnet Mask associated with the Rescue IP address.
+             The value of the Mask is an IP address with all the network bits set to 1
+             and all the hosts bits set to 0."
+    ::= {safeMode 8}
+
+
+
+------ End group -----------------------------------------------------------------
+
+END
+