diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/teldat/TELDAT-MON-INTERF-WLAN-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/teldat/TELDAT-MON-INTERF-WLAN-MIB')
| -rw-r--r-- | MIBS/teldat/TELDAT-MON-INTERF-WLAN-MIB | 1147 |
1 files changed, 1147 insertions, 0 deletions
diff --git a/MIBS/teldat/TELDAT-MON-INTERF-WLAN-MIB b/MIBS/teldat/TELDAT-MON-INTERF-WLAN-MIB new file mode 100644 index 0000000..3d7610b --- /dev/null +++ b/MIBS/teldat/TELDAT-MON-INTERF-WLAN-MIB @@ -0,0 +1,1147 @@ +
+
+ -- Teldat, S.A.
+
+ -- Parque Tecnológico de Madrid
+
+ -- 28760, Tres Cantos (Madrid)
+
+ -- Tlf: +34-918076565
+
+ -- Fax: +34-918076521
+
+ -- e-mail: id@teldat.com
+
+
+ -- Teldat private MIB
+
+ -- WLAN interface monitoring
+
+
+ -- History:
+ -- 02-11-15 P. Nogueira Client table
+ -- 19/05/14 Fernando Hernández XH 3740. WLAN Monitoring MIB
+--------------------------------------------------------------------------------
+
+TELDAT-MON-INTERF-WLAN-MIB
+
+ DEFINITIONS ::= BEGIN
+
+IMPORTS
+ OBJECT-TYPE
+ FROM RFC-1212
+ MacAddress, DisplayString, TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ telProdNpMonInterfRouter
+ FROM TELDAT-SW-STRUCTURE-MIB;
+
+-- **********************************************************************
+-- * Textual conventions
+-- **********************************************************************
+ WlanRSSI ::= TEXTUAL-CONVENTION
+ STATUS mandatory
+ DESCRIPTION
+ "This type is used to represent receiver input levels in dBm."
+ SYNTAX INTEGER (-110..0)
+
+ WlanRate ::= TEXTUAL-CONVENTION
+ STATUS mandatory
+ DESCRIPTION
+ "This type is used to represent WLAN data rates in 500 Kbps units."
+ SYNTAX INTEGER (0..600)
+
+-- Private monitoring of WLAN interface
+
+telProdNpMonInterfWlan OBJECT IDENTIFIER ::= { telProdNpMonInterfRouter 24 }
+
+
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+-- Radio table
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+telProdNpMonInterfWlanRadioTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TelProdNpMonInterfWlanRadioEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The telProdNpMonInterfWlanRadioTable contains information relating to the
+ interfaces available on the system. Each entry corresponds to
+ an available WLAN interface. Entries cannot be added or
+ deleted by the user.
+
+ Creating entries: Entries are created by the system
+ automatically when a new WLAN module is installed.
+
+ Deleting entries: Entries are removed by the system
+ after the appropriate WLAN module is removed."
+ ::= { telProdNpMonInterfWlan 1 }
+
+telProdNpMonInterfWlanRadioEntry OBJECT-TYPE
+ SYNTAX TelProdNpMonInterfWlanRadioEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A base list of objects that are information about Wlan radio data.
+ The index is the number of the interface"
+ INDEX { telProdNpMonInterfWlanRadioIfIndex }
+ ::= { telProdNpMonInterfWlanRadioTable 1 }
+
+TelProdNpMonInterfWlanRadioEntry ::= SEQUENCE
+{
+ telProdNpMonInterfWlanRadioIfIndex INTEGER,
+ telProdNpMonInterfWlanRadioIfMode INTEGER,
+ telProdNpMonInterfWlanRadioIfSpeed INTEGER,
+ telProdNpMonInterfWlanRadioIfChannel INTEGER,
+ telProdNpMonInterfWlanRadioIfRtsThreshold INTEGER,
+ telProdNpMonInterfWlanRadioIfTxPower INTEGER,
+ telProdNpMonInterfWlanRadioIfBand INTEGER,
+ telProdNpMonInterfWlanRadioIfCountry DisplayString,
+ telProdNpMonInterfWlanRadioIfAddress MacAddress,
+ telProdNpMonInterfWlanRadioIfRealChannel INTEGER,
+ telProdNpMonInterfWlanRadioIfFragmentThreshold INTEGER
+}
+
+telProdNpMonInterfWlanRadioIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unique radio index."
+ ::= { telProdNpMonInterfWlanRadioEntry 1 }
+
+telProdNpMonInterfWlanRadioIfMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ mode-11a(1),
+ mode-11b(2),
+ mode-11g(4),
+ mode-11b-11g(6),
+ mode-11n(8),
+ mode-11a-11n(9),
+ mode-11g-11n(12),
+ mode-11b-11g-11n(14),
+ mode-11a-11b-11g-11n(15)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Mixed and compatibility modes between various 802.11 substandards."
+ ::= { telProdNpMonInterfWlanRadioEntry 2 }
+
+telProdNpMonInterfWlanRadioIfSpeed OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The value defines the bitrate or the coding scheme to use for data frames."
+ ::= { telProdNpMonInterfWlanRadioEntry 3 }
+
+telProdNpMonInterfWlanRadioIfChannel OBJECT-TYPE
+ SYNTAX INTEGER (-1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The physical channel "
+ ::= { telProdNpMonInterfWlanRadioEntry 4 }
+
+telProdNpMonInterfWlanRadioIfRtsThreshold OBJECT-TYPE
+ SYNTAX INTEGER (-1..65535)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute shall indicate the number of octets in an
+ MPDU, below which an RTS/CTS handshake shall not be
+ performed, except as RTS/CTS is used as a cross modulation
+ protection mechanism. An RTS/CTS
+ handshake shall be performed at the beginning of any frame
+ exchange sequence where the MPDU is of type Data or
+ Management, the MPDU has an individual address in the
+ Address1 field, and the length of the MPDU is greater than
+ this threshold. Setting this attribute to be larger than the
+ maximum MSDU size shall have the effect of turning off the
+ RTS/CTS handshake for frames of Data or Management type
+ transmitted by this STA. Setting this attribute to one
+ shall have the effect of turning on the RTS/CTS handshake
+ for all frames of Data or Management type transmitted by
+ this STA."
+ ::= { telProdNpMonInterfWlanRadioEntry 5 }
+
+telProdNpMonInterfWlanRadioIfTxPower OBJECT-TYPE
+ SYNTAX INTEGER (0..63)
+ UNITS "dBm"
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Transmitter output power in dBm."
+ ::= { telProdNpMonInterfWlanRadioEntry 6 }
+
+telProdNpMonInterfWlanRadioIfBand OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Frequency band."
+ ::= { telProdNpMonInterfWlanRadioEntry 7 }
+
+telProdNpMonInterfWlanRadioIfCountry OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..3))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute identifies the country in which the station is operating.
+ The first two octets of this string is the two character country code as
+ described in document ISO/IEC 3166-1. The third octet shall be one of the
+ following:
+ 1. an ASCII space character, if the regulations under which the
+ station is operating encompass all environments in the country,
+ 2. an ASCII 'O' character, if the regulations under which the
+ station is operating are for an Outdoor environment only, or
+ 3. an ASCII 'I' character, if the regulations under which the
+ station is operating are for an Indoor environment only."
+ ::= { telProdNpMonInterfWlanRadioEntry 8 }
+
+telProdNpMonInterfWlanRadioIfAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The MAC Address."
+ ::= { telProdNpMonInterfWlanRadioEntry 9 }
+
+telProdNpMonInterfWlanRadioIfRealChannel OBJECT-TYPE
+ SYNTAX INTEGER (0..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The actually selected channel for transmit and receive.
+ In most cases this is the same value as wlanIfChannel,
+ except if automatic channel selection is active. In this
+ case, this variable shows the channel in use."
+ ::= { telProdNpMonInterfWlanRadioEntry 10 }
+
+telProdNpMonInterfWlanRadioIfFragmentThreshold OBJECT-TYPE
+ SYNTAX INTEGER (256..8000)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute shall specify the mandatory maximum size, in
+ octets, of the PSDU that may be delivered to the PHY.
+ This maximum size does not apply in the case of A-MPDU. An
+ MSDU, A-MSDU or MMPDU shall be broken into fragments if its
+ size exceeds the value of this attribute after adding MAC
+ headers and trailers. An MSDU, A-MSDU or MMPDU shall be
+ fragmented when the resulting frame has an individual address
+ in the Address1 field, and the length of the frame is larger
+ than this threshold. The default value for this attribute
+ shall be the lesser of 8000 or the aMPDUMaxLength or the
+ aPSDUMaxLength of the attached PHY and shall never exceed the
+ lesser of 8000 or the aMPDUMaxLength or the
+ aPSDUMaxLength of the attached PHY. The value of this
+ attribute shall never be less than 256."
+ ::= { telProdNpMonInterfWlanRadioEntry 11 }
+
+
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+-- BSS table
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+telProdNpMonInterfWlanBSSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TelProdNpMonInterfWlanBSSEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ " Describes a WLAN VSS and the corresponding settings"
+ ::= { telProdNpMonInterfWlan 2 }
+
+telProdNpMonInterfWlanBSSEntry OBJECT-TYPE
+ SYNTAX TelProdNpMonInterfWlanBSSEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A base list of objects that are information about BSS data.
+ The index is the number of the interface"
+ INDEX { telProdNpMonInterfWlanBSSIfIndex }
+ ::= { telProdNpMonInterfWlanBSSTable 1 }
+
+TelProdNpMonInterfWlanBSSEntry ::= SEQUENCE
+{
+ telProdNpMonInterfWlanBSSIfIndex INTEGER,
+ telProdNpMonInterfWlanBSSId DisplayString,
+ telProdNpMonInterfWlanBSSPrivInvoked INTEGER,
+ telProdNpMonInterfWlanBSSRsn INTEGER,
+ telProdNpMonInterfWlanBSSAkm INTEGER,
+ telProdNpMonInterfWlanBSSCipher INTEGER,
+ telProdNpMonInterfWlanBSSDefaultKey INTEGER,
+ telProdNpMonInterfWlanBSSKey1 OCTET STRING,
+ telProdNpMonInterfWlanBSSKey2 OCTET STRING,
+ telProdNpMonInterfWlanBSSKey3 OCTET STRING,
+ telProdNpMonInterfWlanBSSKey4 OCTET STRING,
+ telProdNpMonInterfWlanBSSMaxAsoc INTEGER,
+ telProdNpMonInterfWlanBSSAcl INTEGER,
+ telProdNpMonInterfWlanBSSClientIsolation INTEGER,
+ telProdNpMonInterfWlanBSSHidden INTEGER,
+ telProdNpMonInterfWlanBSSBssId MacAddress,
+ telProdNpMonInterfWlanBSSBeaconPeriod INTEGER,
+ telProdNpMonInterfWlanBSSDTIMPeriod INTEGER,
+ telProdNpMonInterfWlanBSSMSDUTx Counter32,
+ telProdNpMonInterfWlanBSSMSDURx Counter32,
+ telProdNpMonInterfWlanBSSBytesTx Counter32,
+ telProdNpMonInterfWlanBSSBytesRx Counter32,
+ telProdNpMonInterfWlanBSSCurrent INTEGER,
+ telProdNpMonInterfWlanBSSOpMode INTEGER,
+ telProdNpMonInterfwlanBSSPassPhrase OCTET STRING
+}
+
+telProdNpMonInterfWlanBSSIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Unique BSS index."
+ ::= { telProdNpMonInterfWlanBSSEntry 1 }
+
+telProdNpMonInterfWlanBSSId OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..32))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute reflects the SSID."
+ ::= { telProdNpMonInterfWlanBSSEntry 2 }
+
+telProdNpMonInterfWlanBSSPrivInvoked OBJECT-TYPE
+ SYNTAX INTEGER { none(1), enable(2) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Privacy invoked. If enabled, some level of security is invoked
+ when transmitting data frames."
+ ::= { telProdNpMonInterfWlanBSSEntry 3 }
+
+telProdNpMonInterfWlanBSSRsn OBJECT-TYPE
+ SYNTAX INTEGER { wpa(0), wpa2(1), none(2), wpa-wpa2(3) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Robust Security Network setting."
+ ::= { telProdNpMonInterfWlanBSSEntry 4 }
+
+telProdNpMonInterfWlanBSSAkm OBJECT-TYPE
+ SYNTAX INTEGER { dot1x(0), psk(1) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Authenticated Key Management setting."
+ ::= { telProdNpMonInterfWlanBSSEntry 5 }
+
+telProdNpMonInterfWlanBSSCipher OBJECT-TYPE
+ SYNTAX INTEGER { none(0), auto(1), wep(2), tkip(3), aes-ccm(4) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The ciphers in use for WPA or WPA2.
+ auto(1) is used for TKIP and AES"
+ ::= { telProdNpMonInterfWlanBSSEntry 6 }
+
+telProdNpMonInterfWlanBSSDefaultKey OBJECT-TYPE
+ SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Default key for WEP encryption. This is the key used
+ to transmit data frames if WEP is enabled"
+ ::= { telProdNpMonInterfWlanBSSEntry 7 }
+
+telProdNpMonInterfWlanBSSKey1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Key string for WEP key number 1."
+ ::= { telProdNpMonInterfWlanBSSEntry 8 }
+
+telProdNpMonInterfWlanBSSKey2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..33))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Key string for WEP key number 2."
+ ::= { telProdNpMonInterfWlanBSSEntry 9 }
+
+telProdNpMonInterfWlanBSSKey3 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..33))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Key string for WEP key number 3."
+ ::= { telProdNpMonInterfWlanBSSEntry 10 }
+
+telProdNpMonInterfWlanBSSKey4 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..33))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Key string for WEP key number 4."
+ ::= { telProdNpMonInterfWlanBSSEntry 11 }
+
+telProdNpMonInterfWlanBSSMaxAsoc OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The number of allowed clients of the requested BSS."
+ ::= { telProdNpMonInterfWlanBSSEntry 12 }
+
+telProdNpMonInterfWlanBSSAcl OBJECT-TYPE
+ SYNTAX INTEGER { disable(0), deny-entries(1), allow-entries(2) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MAC Media Access Control via MAC Address."
+ ::= { telProdNpMonInterfWlanBSSEntry 13 }
+
+telProdNpMonInterfWlanBSSClientIsolation OBJECT-TYPE
+ SYNTAX INTEGER { disable(0), enable(1) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Client isolation setting."
+ ::= { telProdNpMonInterfWlanBSSEntry 14 }
+
+telProdNpMonInterfWlanBSSHidden OBJECT-TYPE
+ SYNTAX INTEGER { yes(2), no(1) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Define whether SSID is hidden (yes(2)) or not (no(1))."
+ ::= { telProdNpMonInterfWlanBSSEntry 15 }
+
+telProdNpMonInterfWlanBSSBssId OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This object contains the actual current BSSID for the service set."
+ ::= { telProdNpMonInterfWlanBSSEntry 16 }
+
+telProdNpMonInterfWlanBSSBeaconPeriod OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute shall specify the number of TU that a
+ station shall use for scheduling Beacon transmissions.
+ This value is transmitted in Beacon and Probe Response
+ frames."
+ ::= { telProdNpMonInterfWlanBSSEntry 17 }
+
+telProdNpMonInterfWlanBSSDTIMPeriod OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute shall specify the number of beacon
+ intervals that shall elapse between transmission of
+ Beacons frames containing a TIM element whose DTIM
+ Count field is 0. This value is transmitted in
+ the DTIM Period field of Beacon frames."
+ ::= { telProdNpMonInterfWlanBSSEntry 18 }
+
+telProdNpMonInterfWlanBSSMSDUTx OBJECT-TYPE
+ SYNTAX Counter32
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute counts the total number of
+ packets transmitted on this BSS."
+ ::= { telProdNpMonInterfWlanBSSEntry 19 }
+
+telProdNpMonInterfWlanBSSMSDURx OBJECT-TYPE
+ SYNTAX Counter32
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute counts the total number of
+ packets received by this BSS."
+ ::= { telProdNpMonInterfWlanBSSEntry 20 }
+
+telProdNpMonInterfWlanBSSBytesTx OBJECT-TYPE
+ SYNTAX Counter32
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Transmitted Bytes."
+ ::= { telProdNpMonInterfWlanBSSEntry 21 }
+
+telProdNpMonInterfWlanBSSBytesRx OBJECT-TYPE
+ SYNTAX Counter32
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Received Bytes."
+ ::= { telProdNpMonInterfWlanBSSEntry 22 }
+
+telProdNpMonInterfWlanBSSCurrent OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Count of current associated stations"
+ ::= { telProdNpMonInterfWlanBSSEntry 23 }
+
+telProdNpMonInterfWlanBSSOpMode OBJECT-TYPE
+ SYNTAX INTEGER { access-point(0), station(1), wbr(2), repeater(3) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This value specify that the scan properties is used for AP,
+ client or wds."
+ ::= { telProdNpMonInterfWlanBSSEntry 24 }
+
+telProdNpMonInterfwlanBSSPassPhrase OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Passphrase string for WPA-PSK and WPA2-PSK."
+ ::= { telProdNpMonInterfWlanBSSEntry 25 }
+
+
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+-- Station table
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+telProdNpMonInterfWlanStationTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TelProdNpMonInterfWlanStationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The telProdNpMonInterfWlanStation contains information relating to the
+ clients currently associated to our access points.
+ Each entry corresponds to
+ an associated client station (STA).
+ Entries cannot be added or deleted by the user.
+
+ Creating entries: Entries are created by the system
+ automatically when a new STA ia associated.
+
+ Deleting entries: Entries are removed by the system
+ whenever an associated STA is removed."
+ ::= { telProdNpMonInterfWlan 3 }
+
+telProdNpMonInterfWlanStationEntry OBJECT-TYPE
+ SYNTAX TelProdNpMonInterfWlanStationEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A base list of objects that are information about stations.
+ The index is the number of the interface and the MAC address of the station"
+ INDEX { telProdNpMonInterfWlanStationIfIndex, telProdNpMonInterfWlanStationAddress }
+ ::= { telProdNpMonInterfWlanStationTable 1 }
+
+TelProdNpMonInterfWlanStationEntry ::= SEQUENCE
+{
+ telProdNpMonInterfWlanStationIfIndex INTEGER,
+ telProdNpMonInterfWlanStationAddress MacAddress,
+ telProdNpMonInterfWlanStationState INTEGER,
+ telProdNpMonInterfWlanStationSecurity INTEGER,
+ telProdNpMonInterfWlanStationNode INTEGER,
+ telProdNpMonInterfWlanStationMSDUTx Counter32,
+ telProdNpMonInterfWlanStationMSDURx Counter32,
+ telProdNpMonInterfWlanStationBytesRx Counter32,
+ telProdNpMonInterfWlanStationBytesTx Counter32,
+ telProdNpMonInterfWlanStationRate WlanRate,
+ telProdNpMonInterfWlanStationSignal WlanRSSI,
+ telProdNpMonInterfWlanStationNoise WlanRSSI,
+ telProdNpMonInterfWlanStationConnectTime Counter32
+}
+
+telProdNpMonInterfWlanStationIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Interface number."
+ ::= { telProdNpMonInterfWlanStationEntry 1 }
+
+telProdNpMonInterfWlanStationAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "MAC Address of the Assigned STA."
+ ::= { telProdNpMonInterfWlanStationEntry 2 }
+
+telProdNpMonInterfWlanStationState OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Station state."
+ ::= { telProdNpMonInterfWlanStationEntry 3 }
+
+telProdNpMonInterfWlanStationSecurity OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ wep40(2),
+ wep104(3),
+ wpa-psk(4),
+ wpa(5),
+ wpa2(6),
+ wpa2-psk(7)
+ }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Security Option of the Station."
+ ::= { telProdNpMonInterfWlanStationEntry 4 }
+
+telProdNpMonInterfWlanStationNode OBJECT-TYPE
+ SYNTAX INTEGER { unknown(1), access-point(2), client(3) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Node type of the Station."
+ ::= { telProdNpMonInterfWlanStationEntry 5 }
+
+telProdNpMonInterfWlanStationMSDUTx OBJECT-TYPE
+ SYNTAX Counter32
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute counts the total number of
+ packets transmitted to this station."
+ ::= { telProdNpMonInterfWlanStationEntry 6 }
+
+telProdNpMonInterfWlanStationMSDURx OBJECT-TYPE
+ SYNTAX Counter32
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute counts the total number of
+ packets received from this station."
+ ::= { telProdNpMonInterfWlanStationEntry 7 }
+
+telProdNpMonInterfWlanStationBytesTx OBJECT-TYPE
+ SYNTAX Counter32
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute counts the total number of
+ octets transmitted to this station."
+ ::= { telProdNpMonInterfWlanStationEntry 8 }
+
+telProdNpMonInterfWlanStationBytesRx OBJECT-TYPE
+ SYNTAX Counter32
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute counts the total number of
+ octets received from this station."
+ ::= { telProdNpMonInterfWlanStationEntry 9 }
+
+telProdNpMonInterfWlanStationRate OBJECT-TYPE
+ SYNTAX WlanRate
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute reflects the data rate of the latest
+ packet received from this station, in 500 kbps units."
+ ::= { telProdNpMonInterfWlanStationEntry 10 }
+
+telProdNpMonInterfWlanStationSignal OBJECT-TYPE
+ SYNTAX WlanRSSI
+ UNITS "dBm"
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute shows the received signal strength in dBm."
+ ::= { telProdNpMonInterfWlanStationEntry 11 }
+
+telProdNpMonInterfWlanStationNoise OBJECT-TYPE
+ SYNTAX WlanRSSI
+ UNITS "dBm"
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute shows the measured noise level in dBm, or
+ 0 if no connection can be established."
+ ::= { telProdNpMonInterfWlanStationEntry 12 }
+
+telProdNpMonInterfWlanStationConnectTime OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "s"
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute records the system uptime at the moment
+ the client successfully finished association."
+ ::= { telProdNpMonInterfWlanStationEntry 13 }
+
+
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+-- ACL table
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+telProdNpMonInterfWlanACLTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TelProdNpMonInterfWlanACLEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The WLAN Access List based on MAC Addresses"
+ ::= { telProdNpMonInterfWlan 4 }
+
+telProdNpMonInterfWlanACLEntry OBJECT-TYPE
+ SYNTAX TelProdNpMonInterfWlanACLEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "The WLAN Access List based on MAC Addresses entry.
+ Index: telProdNpMonInterfWlanACLIfIndex telProdNpMonInterfWlanACLAddress."
+ INDEX { telProdNpMonInterfWlanACLIfIndex, telProdNpMonInterfWlanACLAddress }
+ ::= { telProdNpMonInterfWlanACLTable 1 }
+
+TelProdNpMonInterfWlanACLEntry ::= SEQUENCE
+{
+ telProdNpMonInterfWlanACLIfIndex INTEGER,
+ telProdNpMonInterfWlanACLAddress MacAddress
+}
+
+telProdNpMonInterfWlanACLIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Interface the MAC Address belongs."
+ ::= { telProdNpMonInterfWlanACLEntry 1 }
+
+telProdNpMonInterfWlanACLAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The MAC Address for the accepted client"
+ ::= { telProdNpMonInterfWlanACLEntry 2 }
+
+
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+-- Scan results table
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+telProdNpMonInterfWlanScanResultsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TelProdNpMonInterfWlanScanResultsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "This table contains the list of BSS entries found by foreground
+ or background scanning in client mode."
+ ::= { telProdNpMonInterfWlan 5 }
+
+telProdNpMonInterfWlanScanResultsEntry OBJECT-TYPE
+ SYNTAX TelProdNpMonInterfWlanScanResultsEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A entry of the table.
+ Index: telProdNpMonInterfWlanScanResultsIfIndex, telProdNpMonInterfWlanScanResultsIndex"
+ INDEX { telProdNpMonInterfWlanScanResultsIfIndex, telProdNpMonInterfWlanScanResultsIndex }
+ ::= { telProdNpMonInterfWlanScanResultsTable 1 }
+
+TelProdNpMonInterfWlanScanResultsEntry ::= SEQUENCE
+{
+ telProdNpMonInterfWlanScanResultsIfIndex INTEGER,
+ telProdNpMonInterfWlanScanResultsIndex INTEGER,
+ telProdNpMonInterfWlanScanResultsBSSID MacAddress,
+ telProdNpMonInterfWlanScanResultsSSID DisplayString,
+ telProdNpMonInterfWlanScanResultsChannel INTEGER,
+ telProdNpMonInterfWlanScanResultsSignal WlanRSSI,
+ telProdNpMonInterfWlanScanResultsNoise WlanRSSI,
+ telProdNpMonInterfWlanScanResultsBeaconPeriod INTEGER,
+ telProdNpMonInterfWlanScanResultsRates DisplayString,
+ telProdNpMonInterfWlanScanResultsBasicRates DisplayString,
+ telProdNpMonInterfWlanScanResultsExtendedRates DisplayString
+}
+
+telProdNpMonInterfWlanScanResultsIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ifIndex of the WLAN Interface the scan results belong to."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 1 }
+
+telProdNpMonInterfWlanScanResultsIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Auxiliary index for different BSS entries."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 2 }
+
+telProdNpMonInterfWlanScanResultsBSSID OBJECT-TYPE
+ SYNTAX MacAddress
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "BSSID of this BSS."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 3 }
+
+telProdNpMonInterfWlanScanResultsSSID OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "SSID aka network name of this BSS.
+ If broadcasting of SSID is disabled on this
+ BSS, this string may be empty."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 4 }
+
+telProdNpMonInterfWlanScanResultsChannel OBJECT-TYPE
+ SYNTAX INTEGER (1..256)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The channel this BSS was received on."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 5 }
+
+telProdNpMonInterfWlanScanResultsSignal OBJECT-TYPE
+ SYNTAX WlanRSSI
+ UNITS "dBm"
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Receive signal strength of this BSS."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 6 }
+
+telProdNpMonInterfWlanScanResultsNoise OBJECT-TYPE
+ SYNTAX WlanRSSI
+ UNITS "dBm"
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute shows the measured noise level in dBm, or
+ 0 when this value is not available.
+ It's the value measured during the last reception of data."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 7 }
+
+telProdNpMonInterfWlanScanResultsBeaconPeriod OBJECT-TYPE
+ SYNTAX INTEGER (1..65535)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute contains the number of TU that this
+ BSS uses for scheduling Beacon transmissions."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 8 }
+
+telProdNpMonInterfWlanScanResultsRates OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute contains one octet for each
+ supported rate in this BSS, in Mbps units."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 9 }
+
+telProdNpMonInterfWlanScanResultsBasicRates OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute contains one octet for each required
+ basic rate in this BSS, in Mbps units."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 10 }
+
+telProdNpMonInterfWlanScanResultsExtendedRates OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute contains one octet for each supported
+ extended rate in this BSS, in Mbps units."
+ ::= { telProdNpMonInterfWlanScanResultsEntry 11 }
+
+
+
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+-- WMM table
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+
+telProdNpMonInterfWlanWMMTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TelProdNpMonInterfWlanWMMEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Describes a WLAN WMM Access category settings"
+ ::= { telProdNpMonInterfWlan 6 }
+
+telProdNpMonInterfWlanWMMEntry OBJECT-TYPE
+ SYNTAX TelProdNpMonInterfWlanWMMEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A entry of the table.
+ Index: telProdNpMonInterfWlanWMMAccCat, telProdNpMonInterfWlanWMMwlanIf, telProdNpMonInterfWlanWMMType "
+ INDEX { telProdNpMonInterfWlanWMMAccCat, telProdNpMonInterfWlanWMMwlanIf, telProdNpMonInterfWlanWMMType }
+ ::= { telProdNpMonInterfWlanWMMTable 1 }
+
+TelProdNpMonInterfWlanWMMEntry ::= SEQUENCE
+{
+ telProdNpMonInterfWlanWMMAccCat INTEGER,
+ telProdNpMonInterfWlanWMMwlanIf INTEGER,
+ telProdNpMonInterfWlanWMMaCWmin INTEGER,
+ telProdNpMonInterfWlanWMMaCWmax INTEGER,
+ telProdNpMonInterfWlanWMMAifsn INTEGER,
+ telProdNpMonInterfWlanWMMTxopLimit INTEGER,
+ telProdNpMonInterfWlanWMMAckPolicy INTEGER,
+ telProdNpMonInterfWlanWMMACM INTEGER,
+ telProdNpMonInterfWlanWMMType INTEGER
+}
+
+telProdNpMonInterfWlanWMMwlanIf OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Radio index the AC belongs to."
+ ::= { telProdNpMonInterfWlanWMMEntry 1 }
+
+telProdNpMonInterfWlanWMMAccCat OBJECT-TYPE
+ SYNTAX INTEGER { besteffort(1), background(2), video(3), voice(4) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Access category type, each category is mandatory for a wlanIf.
+
+ An access category (AC) is a label for the common set of enhanced
+ distributed channel access (EDCA) parameters that are used by a
+ quality of service (QoS) station (QSTA) to contend for the channel
+ in order to transmit medium access control (MAC) service data
+ units (MSDUs) with certain priorities.
+
+ (More info in '802.11E / 3.123 access category (AC)').
+
+ besteffort(1): standard/default priority
+ background(2): low priority
+ video(3): medium priority (higher than 'besteffort')
+ voice(4): high priority"
+ ::= { telProdNpMonInterfWlanWMMEntry 2 }
+
+telProdNpMonInterfWlanWMMType OBJECT-TYPE
+ SYNTAX INTEGER { access-point(1), station(2) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Type to which this telProdNpMonInterfWlanWMMEntry corresponds.
+ Type access-point means the own parameters for WMM are changed.
+ The entries with type station will be provided to the connected
+ stations via WMM-IE."
+ ::= { telProdNpMonInterfWlanWMMEntry 3 }
+
+telProdNpMonInterfWlanWMMaCWmin OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Minimum size of contention window.
+ for AC_BK and AC_BE telProdNpMonInterfWlanWMMaCWmin = telProdNpMonInterfWlanIfCWmin,
+ for AC_VI telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-1)/2,
+ for AC_VO telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-3)/4."
+ ::= { telProdNpMonInterfWlanWMMEntry 4 }
+
+telProdNpMonInterfWlanWMMaCWmax OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Maximum size of contention window.
+ for AC_BK telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmax,
+ for AC_BE telProdNpMonInterfWlanWMMaCWmax = 4*telProdNpMonInterfWlanIfCWmin + 3,
+ for AC_VI telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmin,
+ for AC_VO telProdNpMonInterfWlanWMMaCWmax = (telProdNpMonInterfWlanIfCWmin-1)/2."
+ ::= { telProdNpMonInterfWlanWMMEntry 5 }
+
+telProdNpMonInterfWlanWMMAifsn OBJECT-TYPE
+ SYNTAX INTEGER (0..99)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Arbitration Inter-Frame Space Number (AIFSN)
+ for this Access category."
+ ::= { telProdNpMonInterfWlanWMMEntry 6 }
+
+telProdNpMonInterfWlanWMMTxopLimit OBJECT-TYPE
+ SYNTAX INTEGER (0..9999)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "802.11 mode Transmit Opportunity Limit. The TxopLimit
+ value is given in units of 32 microseconds."
+ ::= { telProdNpMonInterfWlanWMMEntry 7 }
+
+telProdNpMonInterfWlanWMMAckPolicy OBJECT-TYPE
+ SYNTAX INTEGER { ack(1), noAck(2) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ack policy for this Access category (default value is 'ack(1)')."
+ ::= { telProdNpMonInterfWlanWMMEntry 8 }
+
+telProdNpMonInterfWlanWMMACM OBJECT-TYPE
+ SYNTAX INTEGER { enabled(1), disabled(2) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "ACM (admission control) policy for this Access category i
+ (default value is 'disabled(2)')."
+ ::= { telProdNpMonInterfWlanWMMEntry 9 }
+
+
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+-- Client table
+-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
+telProdNpMonInterfWlanClientTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TelProdNpMonInterfWlanClientEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ " Describes a WLAN Client and the corresponding
+ settings"
+ ::= { telProdNpMonInterfWlan 7 }
+
+telProdNpMonInterfwlanClientEntry OBJECT-TYPE
+ SYNTAX TelProdNpMonInterfWlanClientEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A base list of objects with information about the networks the
+ WLAN can connect to when acting as a client.
+ The indexes are the number of the WLAN interface and the network
+ index"
+ INDEX { telProdNpMonInterfWlanClientIfIndex, telProdNpMonInterfWlanClientSSID}
+ ::= { telProdNpMonInterfWlanClientTable 1 }
+
+TelProdNpMonInterfWlanClientEntry ::= SEQUENCE
+{
+ telProdNpMonInterfWlanClientIfIndex INTEGER,
+ telProdNpMonInterfWlanClientSSID DisplayString,
+ telProdNpMonInterfWlanClientPriority INTEGER,
+ telProdNpMonInterfWlanClientPrivInvoked INTEGER,
+ telProdNpMonInterfWlanClientRsn INTEGER,
+ telProdNpMonInterfWlanClientAkm INTEGER,
+ telProdNpMonInterfWlanClientCipher INTEGER,
+ telProdNpMonInterfWlanClientDefaultKey INTEGER,
+ telProdNpMonInterfWlanClientKey1 OCTET STRING,
+ telProdNpMonInterfWlanClientKey2 OCTET STRING,
+ telProdNpMonInterfWlanClientKey3 OCTET STRING,
+ telProdNpMonInterfWlanClientKey4 OCTET STRING,
+ telProdNpMonInterfwlanClientPassPhrase OCTET STRING
+}
+
+telProdNpMonInterfWlanClientIfIndex OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "WLAN interface index."
+ DEFVAL { 0 }
+ ::= { telProdNpMonInterfwlanClientEntry 1 }
+
+telProdNpMonInterfWlanClientSSID OBJECT-TYPE
+ SYNTAX DisplayString
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Service Set Name"
+ ::= { telProdNpMonInterfwlanClientEntry 2 }
+
+telProdNpMonInterfWlanClientPriority OBJECT-TYPE
+ SYNTAX INTEGER { none(1), enable(2) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Priority of the network. The higher the priority,
+ the sooner the client tries to associate with it."
+ ::= { telProdNpMonInterfwlanClientEntry 3 }
+
+telProdNpMonInterfWlanClientPrivInvoked OBJECT-TYPE
+ SYNTAX INTEGER { none(1), enable(2) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Privacy invoked. If enabled, some level of security is invoked
+ when transmitting data frames."
+ ::= { telProdNpMonInterfwlanClientEntry 4 }
+
+telProdNpMonInterfWlanClientRsn OBJECT-TYPE
+ SYNTAX INTEGER { wpa(0), wpa2(1), none(2), wpa-wpa2(3) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Robust Security Network settings."
+ ::= { telProdNpMonInterfwlanClientEntry 5 }
+
+telProdNpMonInterfWlanClientAkm OBJECT-TYPE
+ SYNTAX INTEGER { dot1x(0), psk(1) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The Authenticated Key Management setting."
+ ::= { telProdNpMonInterfwlanClientEntry 6 }
+
+telProdNpMonInterfWlanClientCipher OBJECT-TYPE
+ SYNTAX INTEGER { none(0), auto(1), wep(2), tkip(3), aes-ccm(4) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The ciphers in use for WPA or WPA2.
+ auto(1) is used for TKIP and AES"
+ ::= { telProdNpMonInterfwlanClientEntry 7 }
+
+telProdNpMonInterfWlanClientDefaultKey OBJECT-TYPE
+ SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) }
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Default key for WEP encryption. This is the key used
+ to transmit data frames if WEP is enabled"
+ ::= { telProdNpMonInterfwlanClientEntry 8 }
+
+telProdNpMonInterfWlanClientKey1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..33))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Key string for WEP key number 1."
+ ::= { telProdNpMonInterfwlanClientEntry 9 }
+
+telProdNpMonInterfWlanClientKey2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..33))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Key string for WEP key number 2."
+ ::= { telProdNpMonInterfwlanClientEntry 10 }
+
+telProdNpMonInterfWlanClientKey3 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..33))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Key string for WEP key number 3."
+ ::= { telProdNpMonInterfwlanClientEntry 11 }
+
+telProdNpMonInterfWlanClientKey4 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..33))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Key string for WEP key number 4."
+ ::= { telProdNpMonInterfwlanClientEntry 12 }
+
+telProdNpMonInterfwlanClientPassPhrase OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Passphrase string for WPA-PSK and WPA2-PSK."
+ ::= { telProdNpMonInterfwlanClientEntry 13 }
+
+END
|