Initial commitHEADmain

1 files changed, 1888 insertions, 0 deletions

diff --git a/MIBS/teleste/TELESTE-COMMON-MIB b/MIBS/teleste/TELESTE-COMMON-MIB
new file mode 100644
index 0000000..f559122
--- /dev/null
+++ b/MIBS/teleste/TELESTE-COMMON-MIB
@@ -0,0 +1,1888 @@
+--
+-- TELESTE-COMMON-MIB.mib
+-- MIB generated by MG-SOFT Visual MIB Builder Version 4.0 Build 349
+-- Friday, May 02, 2008 at 09:31:32
+--
+
+-- *****************************************************************************
+-- Copyright (c) 2000-2008 by:
+-- 
+-- Teleste Corporation
+-- Seponkatu 1
+-- FIN-20660 Littoinen, Finland
+-- tel. +358 2 2605 611
+-- url: http://www.teleste.com
+-- 
+-- Description: Common objects for all Teleste products
+-- 
+-- Revision History:
+-- -----------------
+-- 1.47 26.3.2008 Matti Susi
+-- - added product key control objects
+-- - added geographical coordinate objects
+-- 
+-- 1.46 22.2.2008 Matti Susi
+-- - added new enumeration values to statusSw and statusSettings
+-- 
+-- 1.45 28.5.2007 Matti Susi
+-- - added object statusSettings
+-- 
+-- 1.44 30.11.2006 Matti Susi
+-- - added moduleSWUpdate Table
+-- - added totalUptime and resetCount objects
+-- 
+-- 1.43 13.6.2006 Matti Susi
+-- - added statusHw and statusSw objects
+-- 
+-- 1.42 12.4.2006 Matti Susi
+-- - added statusTemperature and statusFan objects
+-- 
+-- 1.41 1.4.2003 Matti Susi
+-- - added object controlInternalAppAccess for BXX function
+--   control
+-- 
+-- 1.40 13.9.2002 Matti Susi
+-- - moduleId SYNTAX changed to INTEGER
+-- 
+-- 1.32 7.8.2002 Matti Susi
+-- - Some editorial changes
+-- - Note: SNMPc network manager requires an index object
+--   with size definitions in every SEQUENCE definition.
+--   This must be done manually after creating the MIB with
+--   MIB builder!
+-- 
+-- 1.31 13.5.2002 Matti Susi
+-- - trap delay object inserted
+-- 
+-- 1.3  9.1.2002 Matti Susi
+-- - module temperature limits inserted to moduleControlTable
+-- - trap and alarm control objects inserted
+-- - several objects changed to optional
+-- 
+-- 1.21 18.12.2001 Matti Susi
+-- - editorial changes
+-- 
+-- 1.2  05.11.2001  Rainer Salminen
+-- - added repairIndex and changed indexing of repairLogTable.
+-- 
+-- 1.1  2.11.2001  Pasi Pöri
+-- - trapEnryId added to elementTrapReceiverTable as index 
+--   in order to enable multiple null IP addresses (0.0.0.0). 
+--   Thus no table row manipulation is needed.
+-- - Specified LMT status info more accurately .
+-- 
+-- 1.0  11.10.2001 Rainer Salminen
+-- - Initial release (revised version of TELESTE-GENDATA-MIB)
+-- 
+-- ****************************************************************************
+-- 
+
+	TELESTE-COMMON-MIB DEFINITIONS ::= BEGIN
+ 
+		IMPORTS
+			OBJECT-TYPE			
+				FROM RFC-1212			
+			IpAddress, Counter			
+				FROM RFC1155-SMI			
+			DisplayString			
+				FROM RFC1213-MIB			
+			common, TPhysAddress, Uint16, DateAndTime			
+				FROM TELESTE-ROOT-MIB;
+	
+	
+	
+--
+-- Node definitions
+--
+	
+-- Common element definition
+-- 
+-- An element is a common name for the managed device or system.
+-- It is a concept that corresponds to a network node or a network
+-- element in general. 
+-- 
+-- An element can be a single device system or it can be a modular
+-- system in which case it consists of several modules. The module
+-- in the system that instruments this MIB is called the main module 
+-- or the main controller.
+-- 
+-- The word element has this general meaning everywhere in this 
+-- document.
+-- 
+		-- 1.3.6.1.4.1.3715.99.1
+		element OBJECT IDENTIFIER ::= { common 1 }
+
+		
+-- This section contains element's common identification, classification
+-- and configuration information.
+-- 
+		-- 1.3.6.1.4.1.3715.99.1.1
+		elementInformation OBJECT IDENTIFIER ::= { element 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.1.1
+		elementName OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS mandatory
+			DESCRIPTION
+				"This is the logical name of the controlling module of
+				the network element. The name may or may not be the same
+				as the module's name in the moduleTable."
+			::= { elementInformation 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.1.2
+		elementStructure OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				unknown(1),
+				compact(2),
+				modular(3)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"This object tells whether the device is a single compact
+				device or a modular device."
+			::= { elementInformation 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.1.3
+		elementConfigChangeCode OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"This object is an indicator about changes in the network
+				element configuration. How the value is formed is device
+				dependent. It can be a counter, a checksum of the device
+				configuration parameters, a DateAndTime type variable or
+				even SysUptime, if no other information is available. 
+				DateAndTime is the recommended value.
+				
+				This object is intended to permit a management application
+				to maintain configuration (including moduleTable) 
+				syncronization with the agent."
+			::= { elementInformation 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.1.4
+		elementResetCount OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Total number of software resets during the device's life time."
+			::= { elementInformation 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.1.5
+		elementTotalUpTime OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"The total uptime the device (software) has been running. Unit 1 day."
+			::= { elementInformation 5 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.1.6
+		elementLatitude OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Device latitude coordinate. Unit 0.00001 degrees."
+			::= { elementInformation 6 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.1.7
+		elementLongitude OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Device longitude coordinate. Unit 0.00001 degrees."
+			::= { elementInformation 7 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.1.8
+		elementAltitude OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Device altitude coordinate. Unit 1 metre."
+			::= { elementInformation 8 }
+
+		
+-- This section contains element's general status objects.
+-- 
+		-- 1.3.6.1.4.1.3715.99.1.2
+		elementStatus OBJECT IDENTIFIER ::= { element 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.1
+		statusGeneral OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				normal(1),
+				notification(2),
+				warning(3),
+				alarm(4)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"A number stating the general status of the element.
+				
+				Values:
+				1 = Normal
+				2 = At least one Notification is active
+				3 = At least one Warning is active
+				4 = At least one Alarm is active
+				
+				If the element has more than one state active, then 
+				the state with the highest value is returned."
+			::= { elementStatus 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.2
+		statusBusMaster OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				slaveOnly(1),
+				configuredSlave(2),
+				currentlySlave(3),
+				currentlyMaster(4)
+				}
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"A number stating the Bus Master status of the NE.
+				
+				Values:
+				1 = The NE is a slave-only device
+				2 = The NE is configured as slave
+				3 = The NE is configured as master but is currently
+				    slave because a stronger master is on the bus
+				4 = The NE is currently the bus master"
+			::= { elementStatus 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.3
+		statusLmt OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				noLmtInterface(1),
+				stateUnknown(2),
+				notConnected(3),
+				connected(4)
+				}
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"A number telling if the Local Management Terminal (LMT)
+				is connected to the element.
+				
+				Values:
+				1 = The element does not have an LMT interface
+				2 = The element can not detect if an LMT is connected
+				3 = The element has not detected a connected LMT
+				4 = The element has detected a connected LMT
+				
+				Note! Applies only to fysically point-to-point 
+				connected LMT's to device, not via bus ot other 
+				shared medias."
+			::= { elementStatus 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.4
+		statusLid OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				noLid(1),
+				closed(2),
+				open(3)
+				}
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Element lid status:
+				1 = no lid (no lid sensor is available)
+				2 = lid is closed
+				3 = lid is open"
+			::= { elementStatus 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.5
+		statusTemperature OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				tempNormal(1),
+				tempHIHI(2),
+				tempHi(3),
+				tempLo(4),
+				tempLOLO(5)
+				}
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Element temperature status:
+				1 = normal
+				2 = HIHI
+				3 = Hi
+				4 = Lo
+				5 = LOLO
+				"
+			::= { elementStatus 5 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.6
+		statusFan OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				fanNormal(1),
+				fanFailure(2)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"A common status object for all fans in the device.
+				fanNormal(1) = all fans operate normally
+				fanFailure(2) = at least one fan has a failure"
+			::= { elementStatus 6 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.7
+		statusHardware OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				hwNormal(1),
+				hwFailure(2)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Device hardware status:
+				hwNormal(1) = the hardware operates normally
+				hwFailure(2) = a hardware failure is detected"
+			::= { elementStatus 7 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.8
+		statusSoftware OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				swNormal(1),
+				swFailure(2),
+				swMissing(3),
+				swInitialising(4)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Device software status:
+				swNormal(1) = the software operates normally
+				swFailure(2) = a software failure is detected
+				swMissing(3) = the software or firmware is missing
+				sw(Initialising(4) = the software is initialising"
+			::= { elementStatus 8 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.2.9
+		statusSettings OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				settingsStable(1),
+				settingsChanged(2),
+				settingsNotAvailable(3)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Status of device settings:
+				settingsStable(1) = settings are stable
+				settingsChanged(2) = settings have been (recently) changed
+				settingsNotAvailable(3) = settings status is not available
+				The value should stay in value 2 only a predefined time, e.g. 60 seconds or
+				the time it takes until the settings are written into non-volatile memory.
+				"
+			::= { elementStatus 9 }
+
+		
+-- This section contains element's common control parameters.
+-- 
+		-- 1.3.6.1.4.1.3715.99.1.3
+		elementControl OBJECT IDENTIFIER ::= { element 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.1
+		controlResetElement OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				noReset(1),
+				hardReset(2),
+				softReset(3)
+				}
+			ACCESS read-write
+			STATUS mandatory
+			DESCRIPTION
+				"On write requests this object commands the module to 
+				reset itself.
+				
+				If softReset(3) or hardReset(2) can not be performed,
+				then BAD VALUE error is returned.
+				
+				On read requests value noReset(1) is returned."
+			::= { elementControl 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.2
+		controlBusMasterAdminState OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				master(1),
+				slave(2)
+				}
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"This object tells whether the element is configured as
+				a bus master or not. Only relevant for bus master type
+				of elements. Others return no(2)."
+			::= { elementControl 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.3
+		controlAlarmDetection OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				disabled(1),
+				enabled(2),
+				restart(3)
+				}
+			ACCESS read-write
+			STATUS mandatory
+			DESCRIPTION
+				"This variable is used to disable or enable the element
+				alarm checking. When disabled(1), the element 
+				will not check any alarms (or send traps). 
+				Default value is enabled(2).
+				
+				Note: This variable must be consistent with 
+				commonAlarmDetectionControl in SCTE-HMS-COMMON-MIB, if
+				that is implemented."
+			::= { elementControl 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.4
+		controlMaxNumberTrapReceivers OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Number of entries in the elementTrapReceiverTable. 
+				At least one trap entry must be supported."
+			::= { elementControl 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.5
+		controlTrapReceiverTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ControlTrapReceiverEntry
+			ACCESS not-accessible
+			STATUS optional
+			DESCRIPTION
+				"A table of manager trap receiver addresses, ports and
+				communities. Total number of entries can not exceed 
+				elementNumberTrapReceivers. An entry is deleted from this
+				table by setting its IP address to '0.0.0.0'.
+				
+				Note: one of the community strings must match to 
+				commonTrapCommunityString in SCTE-HMS-COMMON-MIB, if 
+				that is implemented."
+			::= { elementControl 5 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.5.1
+		controlTrapReceiverEntry OBJECT-TYPE
+			SYNTAX ControlTrapReceiverEntry
+			ACCESS not-accessible
+			STATUS optional
+			INDEX { receiverEntryId }
+			::= { controlTrapReceiverTable 1 }
+
+		
+		ControlTrapReceiverEntry ::=
+			SEQUENCE { 
+				receiverEntryId
+					INTEGER,
+				receiverAddress
+					IpAddress,
+				receiverPort
+					INTEGER,
+				receiverCommunity
+					DisplayString
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.1.3.5.1.1
+		receiverEntryId OBJECT-TYPE
+			SYNTAX INTEGER (1..255)
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Unique table index. Makes possible to have several 
+				ip-address of 0.0.0.0 entries so that no mechanism
+				for row manipulation of table is needed."
+			::= { controlTrapReceiverEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.5.1.2
+		receiverAddress OBJECT-TYPE
+			SYNTAX IpAddress
+			ACCESS read-write
+			STATUS mandatory
+			DESCRIPTION
+				"Ip address of the manager receiving Traps."
+			::= { controlTrapReceiverEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.5.1.3
+		receiverPort OBJECT-TYPE
+			SYNTAX INTEGER (1..65535)
+			ACCESS read-write
+			STATUS mandatory
+			DESCRIPTION
+				"Trap UDP port number. Default port is the standard trap
+				port 162."
+			::= { controlTrapReceiverEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.5.1.4
+		receiverCommunity OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS mandatory
+			DESCRIPTION
+				"Community string for the trap receiver.
+				
+				The agent is allowed to limit the length of the string. 
+				Minimum length of eight characters must be supported.
+				
+				Note: one of the community strings must match to 
+				commonTrapCommunityString in SCTE-HMS-COMMON-MIB, if
+				that is implemented."
+			::= { controlTrapReceiverEntry 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.6
+		controlTrapSending OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				enabled(1),
+				disabled(2)
+				}
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Enables/disables trap sending.
+				
+				1 = traps enabled
+				2 = traps disabled"
+			::= { elementControl 6 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.7
+		controlTrapInterval OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"The minimum interval between traps.
+				- Unit 10 milliseconds
+				- Minimum value 0 (send as fast as possible)
+				- Maximum value 1000 (10 seconds)
+				- Default value is 100 (1 second)"
+			::= { elementControl 7 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.8
+		controlTrapLifeTime OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"The maximum time a trap stays in the trap queue waiting
+				for sending.
+				- Unit 1 second.
+				- Minimum value 10
+				- Maximum value 300
+				- Default value 60"
+			::= { elementControl 8 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.9
+		controlAlarmOnDelay OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"The minimum time an object's alarm/warning condition must
+				exist before it is recorded as an alarm/warning. Common
+				to all alarms/warnings
+				- Unit 10 ms
+				- Minimum value 10 (100 ms)
+				- Maximum value 6000 (60 seconds)
+				- Default value 100 (1 second)"
+			::= { elementControl 9 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.10
+		controlAlarmOffDelay OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"The minimum time an alarm/warning entry stays active after
+				the object has reached it's normal condition. Common to all
+				alarms/warnings.
+				- Unit 10 ms
+				- Minimum value 10 (100 ms)
+				- Maximum value 6000 (60 seconds)
+				- default value 100 (1 second)"
+			::= { elementControl 10 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.3.11
+		controlTrapDelay OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"The time before a trap is sent after an alarm
+				is detected.
+				
+				- Unit 10 ms
+				- Minimum value 10 (100 ms)
+				- Maximum value 6000 (60 seconds)
+				- Default value 500 (5 seconds)
+				
+				This parameter can be used to control alarm storms e.g.
+				in an amplifier cascade by using a different value in
+				each amplifier."
+			::= { elementControl 11 }
+
+		
+-- This section contains element's product key parameters
+		-- 1.3.6.1.4.1.3715.99.1.4
+		elementProductKey OBJECT IDENTIFIER ::= { element 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.4
+		productKeyNumberOfKeys OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Number of product keys supported by the device."
+			::= { elementProductKey 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.5
+		productKeyTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ProductKeyEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			::= { elementProductKey 5 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.5.1
+		productKeyEntry OBJECT-TYPE
+			SYNTAX ProductKeyEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			INDEX { productKeyIndex }
+			::= { productKeyTable 1 }
+
+		
+		ProductKeyEntry ::=
+			SEQUENCE { 
+				productKeyIndex
+					INTEGER,
+				productKeyValue
+					OCTET STRING,
+				productKeyMask
+					OCTET STRING,
+				productKeyStatus
+					INTEGER,
+				productKeyCipher
+					INTEGER,
+				productKeyNumberOfFeatures
+					INTEGER
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.1.4.5.1.1
+		productKeyIndex OBJECT-TYPE
+			SYNTAX INTEGER (1..16)
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Product key index."
+			::= { productKeyEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.5.1.2
+		productKeyValue OBJECT-TYPE
+			SYNTAX OCTET STRING
+			ACCESS read-write
+			STATUS mandatory
+			DESCRIPTION
+				"Product key value."
+			::= { productKeyEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.5.1.3
+		productKeyMask OBJECT-TYPE
+			SYNTAX OCTET STRING
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Product key mask."
+			::= { productKeyEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.5.1.4
+		productKeyStatus OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				keyInvalid(1),
+				keyValid(2)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Product key status:
+				1(keyInvalid) = the key is invalid or missing
+				2(keyValid) = the key is valid"
+			::= { productKeyEntry 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.5.1.5
+		productKeyCipher OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				cipherOther(1),
+				cipherBlowFish(2),
+				cipherXXTEA(3)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Cipher method supported by this key:
+				1(cipherOther) = other ciphering is used
+				2(cipherBlowFish) = BlowFish ciphering is used
+				3(cipherXXTEA) = XXTEA ciphering is used"
+			::= { productKeyEntry 5 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.5.1.6
+		productKeyNumberOfFeatures OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Number of features available with this key."
+			::= { productKeyEntry 6 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.6
+		productKeyFeatureTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ProductKeyFeatureEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			::= { elementProductKey 6 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.6.1
+		productKeyFeatureEntry OBJECT-TYPE
+			SYNTAX ProductKeyFeatureEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			INDEX { productKeyIndex, productKeyFeatureIndex }
+			::= { productKeyFeatureTable 1 }
+
+		
+		ProductKeyFeatureEntry ::=
+			SEQUENCE { 
+				productKeyFeatureIndex
+					INTEGER,
+				productKeyFeatureName
+					OCTET STRING,
+				productKeyFeatureEnable
+					INTEGER,
+				productKeyFeatureExpirationTime
+					INTEGER
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.1.4.6.1.1
+		productKeyFeatureIndex OBJECT-TYPE
+			SYNTAX INTEGER (1..32)
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Feature index (second index)."
+			::= { productKeyFeatureEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.6.1.2
+		productKeyFeatureName OBJECT-TYPE
+			SYNTAX OCTET STRING
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"A human-readable description of the feature."
+			::= { productKeyFeatureEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.6.1.3
+		productKeyFeatureEnable OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				featureDisable(1),
+				featureEnable(2)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Status of the feature:
+				1(featureDisable) = the feature si disabled in this device
+				2(featureEnable) = the feature is enabled in this devices"
+			::= { productKeyFeatureEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.1.4.6.1.4
+		productKeyFeatureExpirationTime OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Number of days left before the feature expires. A zero value means
+				infinite validity time. This object has a meaning only if the
+				feature is enabled (productKeyFeatureEnable = 2(featureEnable))."
+			::= { productKeyFeatureEntry 4 }
+
+		
+-- Common module definition
+-- 
+-- The element consists of one or more modules. Module parameters are 
+-- collected into several module tables. Each module has one entry 
+-- in these tables. If the element is a single device, then the tables
+-- have only one entry, which is the element itself.
+-- 
+-- Modules are identified within the element with a unique moduleId.
+-- See the moduleId description for more information.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2
+		module OBJECT IDENTIFIER ::= { common 2 }
+
+		
+-- This section contains the element's identification objects
+-- and other common element information.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.1
+		moduleInformation OBJECT IDENTIFIER ::= { module 1 }
+
+		
+-- 
+-- The moduleTable table shows basic module data of the element. 
+-- Every plug-in module is represented as an entry in the Table. 
+-- If the element is not modular, only the first row is present.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.1.1
+		moduleTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			DESCRIPTION
+				"This table lists basic module identification and 
+				configuration data of modules installed inside 
+				the managed element.
+				
+				The first row in the table list information about the
+				element itself. If the element is not modular, only the 
+				first row exists in the table.
+				
+				Object moduleId is used for indexing the modules
+				in all module section tables."
+			::= { moduleInformation 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.1.1
+		moduleEntry OBJECT-TYPE
+			SYNTAX ModuleEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			INDEX { moduleId }
+			::= { moduleTable 1 }
+
+		
+		ModuleEntry ::=
+			SEQUENCE { 
+				moduleId
+					INTEGER,
+				moduleName
+					DisplayString,
+				moduleHwType
+					DisplayString,
+				moduleRackNo
+					INTEGER,
+				moduleSlotNo
+					INTEGER
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.1.1.1.1
+		moduleId OBJECT-TYPE
+			SYNTAX INTEGER (1..65535)
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"An unique module index identifying the (physical) modules
+				inside the network element. The exact conjunction between
+				the index and the physical modules depends on the element
+				structural principle.
+				
+				For network elements containing plug-in modules the index
+				should follow module slot numbering.
+				
+				This index should be used in all subsequent module tables."
+			::= { moduleEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.1.1.2
+		moduleName OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"The identification name ('aliasname') of the module."
+			::= { moduleEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.1.1.3
+		moduleHwType OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"The hardware type name of the module."
+			::= { moduleEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.1.1.4
+		moduleRackNo OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Rack number of the module.
+				
+				This can be used to identify the physical position of
+				the module in the case where the agent manages modules 
+				that are in several racks."
+			::= { moduleEntry 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.1.1.5
+		moduleSlotNo OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Slot number of the module (within rack)."
+			::= { moduleEntry 5 }
+
+		
+-- 
+-- This table shows detailed module data of the element. 
+-- Every plug-in module is represented as a row in the Table. 
+-- If the element is not modular, only one row is present.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.1.2
+		moduleDetailTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleDetailEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			DESCRIPTION
+				"This table lists detailed module data of modules installed
+				inside the element.
+				
+				The first row in the table list information about the 
+				element itself. If the element is not modular, only the 
+				first row exists in the table."
+			::= { moduleInformation 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1
+		moduleDetailEntry OBJECT-TYPE
+			SYNTAX ModuleDetailEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			INDEX { moduleId }
+			::= { moduleDetailTable 1 }
+
+		
+		ModuleDetailEntry ::=
+			SEQUENCE { 
+				moduleMacAddress
+					TPhysAddress,
+				moduleBusAddress
+					INTEGER,
+				moduleAppDate
+					DateAndTime,
+				moduleAppVersion
+					DisplayString,
+				moduleBiosDate
+					DateAndTime,
+				moduleBiosVersion
+					DisplayString,
+				moduleHwSerialNumber
+					DisplayString,
+				moduleHwVersion
+					DisplayString
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1.1
+		moduleMacAddress OBJECT-TYPE
+			SYNTAX TPhysAddress
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Module MAC address. If the MAC address is unknown
+				'00.00.00.00.00.00' is returned."
+			::= { moduleDetailEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1.2
+		moduleBusAddress OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Module bus address."
+			::= { moduleDetailEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1.3
+		moduleAppDate OBJECT-TYPE
+			SYNTAX DateAndTime
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Module application software date."
+			::= { moduleDetailEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1.4
+		moduleAppVersion OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Module application software version. If software version
+				is undefined, then zero length string is returned."
+			::= { moduleDetailEntry 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1.5
+		moduleBiosDate OBJECT-TYPE
+			SYNTAX DateAndTime
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Module BIOS date."
+			::= { moduleDetailEntry 5 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1.6
+		moduleBiosVersion OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Module BIOS version. If bios version is undefined,
+				a zero length string is returned."
+			::= { moduleDetailEntry 6 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1.7
+		moduleHwSerialNumber OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Module serial number."
+			::= { moduleDetailEntry 7 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.1.2.1.8
+		moduleHwVersion OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Module hardware version."
+			::= { moduleDetailEntry 8 }
+
+		
+-- This section contains status information of the modules
+-- of the element.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.2
+		moduleStatus OBJECT IDENTIFIER ::= { module 2 }
+
+		
+-- 
+-- This table contains common status objects for all
+-- modules inside the element.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.2.1
+		moduleStatusTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleStatusEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			DESCRIPTION
+				"This table contains status objects for modules inside
+				the network element.The first row in the table lists 
+				information about the host module. If the element is 
+				not modular, only the first row exists in the table."
+			::= { moduleStatus 1 }
+-- 
+-- A table of common status objects for all modules.
+-- 
+		
+		-- 1.3.6.1.4.1.3715.99.2.2.1.1
+		moduleStatusEntry OBJECT-TYPE
+			SYNTAX ModuleStatusEntry
+			ACCESS not-accessible
+			STATUS mandatory
+			DESCRIPTION
+				"Row in moduleStatusTable. The index is moduleId from
+				the moduleTable. Row in this table exist only if 
+				there is a row with the same moduleId in the moduleTable."
+			INDEX { moduleId }
+			::= { moduleStatusTable 1 }
+
+		
+		ModuleStatusEntry ::=
+			SEQUENCE { 
+				statusResetCause
+					INTEGER,
+				statusRunningSwImage
+					INTEGER,
+				statusInternalTemperature
+					INTEGER,
+				statusLidStatus
+					INTEGER,
+				statusRestartCounter
+					Counter
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.2.1.1.1
+		statusResetCause OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				unknown(1),
+				selfReset(2),
+				powerReset(3),
+				commandedReset(4),
+				softdownloadReset(5)
+				}
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Reason for the last reset.
+				
+				If the reason is unknown, the value is reasonUnknown(1).
+				If the device makes self reset and it can detect it, then
+				value is reasonSelfReset(2). If the reset was made by the 
+				user from the power switch and it can be sensed, then the 
+				value is reasonPowerReset(3). If the reason is an external 
+				command from the user interface or from the network 
+				message (e.g. commonReset), then the reason is 
+				reasonCommandedReset(4)."
+			::= { moduleStatusEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.2.1.1.2
+		statusRunningSwImage OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Currently running software image number.
+				Bios is 0, applications are numbered from 1..n, 
+				where n is the maximum image number."
+			::= { moduleStatusEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.2.1.1.3
+		statusInternalTemperature OBJECT-TYPE
+			SYNTAX INTEGER (-600..1300)
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Device temperature, unit 0.1 deg C. Value is zero (0),
+				if temperature is not available."
+			::= { moduleStatusEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.2.1.1.4
+		statusLidStatus OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				noLid(1),
+				closed(2),
+				open(3)
+				}
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Current lid status detected by the device. May or may not be
+				the same variable as the elementLidStatus."
+			::= { moduleStatusEntry 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.2.1.1.5
+		statusRestartCounter OBJECT-TYPE
+			SYNTAX Counter
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"This objects counts the number of restarts of the module. 
+				A start can be a cold start or a warm start."
+			::= { moduleStatusEntry 5 }
+-- 
+-- 
+		
+-- This section contains control entities of the modules
+-- of the element.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.3
+		moduleControl OBJECT IDENTIFIER ::= { module 3 }
+
+		
+-- 
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.3.1
+		moduleControlTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleControlEntry
+			ACCESS not-accessible
+			STATUS optional
+			DESCRIPTION
+				"This table contains common control commands for all the
+				modules inside the element."
+			::= { moduleControl 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1
+		moduleControlEntry OBJECT-TYPE
+			SYNTAX ModuleControlEntry
+			ACCESS not-accessible
+			STATUS optional
+			INDEX { moduleId }
+			::= { moduleControlTable 1 }
+
+		
+		ModuleControlEntry ::=
+			SEQUENCE { 
+				controlLedUsage
+					INTEGER,
+				controlMarkState
+					INTEGER,
+				controlReset
+					INTEGER,
+				controlTempLimitHiHi
+					INTEGER,
+				controlTempLimitHi
+					INTEGER,
+				controlTempLimitLo
+					INTEGER,
+				controlTempLimitLoLo
+					INTEGER,
+				controlTempDeadBand
+					INTEGER,
+				controlInternalAppAccess
+					INTEGER,
+				controlLocalAccess
+					INTEGER
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.1
+		controlLedUsage OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				notSupported(1),
+				alwaysOn(2),
+				offWhenLidClosed(3)
+				}
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"A variable to instruct how device LED's behave when 
+				the lid is closed."
+			::= { moduleControlEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.2
+		controlMarkState OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				notSupported(1),
+				on(2),
+				off(3)
+				}
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"A variable to instruct the device to start and stop
+				showing mark (blinking module LED).
+				
+				On read requests returns the current mark state."
+			::= { moduleControlEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.3
+		controlReset OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				noReset(1),
+				hardReset(2),
+				softReset(3)
+				}
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"On write requests this object commands the module to 
+				reset itself.
+				
+				If softReset(3) or hardReset(2) can not be performed,
+				then BAD VALUE error is returned.
+				
+				On read requests value noReset(1) is returned."
+			::= { moduleControlEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.4
+		controlTempLimitHiHi OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Module temperature HiHi (high alarm) limit in 0.1 degC."
+			::= { moduleControlEntry 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.5
+		controlTempLimitHi OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Module temperature Hi (high warning) limit in 0.1 degC."
+			::= { moduleControlEntry 5 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.7
+		controlTempLimitLo OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Module temperature Lo (low warning) limit in 0.1 degC."
+			::= { moduleControlEntry 7 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.8
+		controlTempLimitLoLo OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Module temperature LoLo (low alarm) limit in 0.1 degC."
+			::= { moduleControlEntry 8 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.9
+		controlTempDeadBand OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Module temperature alarm/warning deadband in 0.1 degC. Common
+				to all limit values (LoLo, Lo, Hi, HiHi). The deadband defines
+				the difference between the 'ON' limit and the 'OFF' limit of
+				the corresponding alarm.
+				
+				Example: The Hi limit is 65 degC and the deadband is 5 degC.
+				The high warning is activated when the temperature exceeds
+				65 degC and deactivated only after it falls below 60 degC."
+			::= { moduleControlEntry 9 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.10
+		controlInternalAppAccess OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				allowIntControl(1),
+				denyIntControl(2)
+				}
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"This object defines whether the internal controller application
+				is able to access the module parameters. This corresponds
+				to the BXX module setting 'Allow Functions'.
+				1 = allow internal control
+				2 = deny internal control (remote control is possible)"
+			::= { moduleControlEntry 10 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.1.1.11
+		controlLocalAccess OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				disabled(1),
+				enabled(2)
+				}
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"This object defines whether the local user interface
+				(buttons, knobs etc.) is enabled or disabled. Values:
+				1 = disabled, local UI is locked
+				2 = enabled, local UI is active
+				For modules/devices with no local UI this objects should
+				return value 'disabled (1)."
+			::= { moduleControlEntry 11 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.2
+		moduleSWUpdateTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleSWUpdateEntry
+			ACCESS not-accessible
+			STATUS optional
+			DESCRIPTION
+				"A table of software update control objects."
+			::= { moduleControl 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.2.1
+		moduleSWUpdateEntry OBJECT-TYPE
+			SYNTAX ModuleSWUpdateEntry
+			ACCESS not-accessible
+			STATUS optional
+			INDEX { moduleId }
+			::= { moduleSWUpdateTable 1 }
+
+		
+		ModuleSWUpdateEntry ::=
+			SEQUENCE { 
+				sWUpdateControl
+					INTEGER,
+				swUpdateURL
+					DisplayString,
+				sWUpdateFileName
+					DisplayString,
+				sWUpdateStatus
+					DisplayString
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.3.2.1.1
+		sWUpdateControl OBJECT-TYPE
+			SYNTAX INTEGER
+				{
+				updateIdle(1),
+				updateRunning(2),
+				updateFailed(3),
+				updateStart(4)
+				}
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Writing value updateStart(4) commands the module to run a software 
+				update. The software image location and  file name are specified in 
+				sWUpdateURL and sWUpdateFilename.
+				
+				Writing a updateIdle(1) when the update is running will terminate the 
+				update process immediately. Writing any value when no update is 
+				runnign has no effect.
+				
+				Reading this object returns either updateIdle(1), updateRunning(2) or 
+				updateFailed(3) depending on the status of the (last) software update.
+				"
+			::= { moduleSWUpdateEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.2.1.2
+		swUpdateURL OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"The URL where the software image can be downloaded.
+				
+				Format e.g. TFTP:\\downloads\swupdate\."
+			::= { moduleSWUpdateEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.2.1.3
+		sWUpdateFileName OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"File name of the software image file to be downloaded."
+			::= { moduleSWUpdateEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.3.2.1.4
+		sWUpdateStatus OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Description of the software update result.
+				
+				After successful update this object should return a string 
+				'Software updated successfully on <date and time>'. If the update failed 
+				the returned value should be 'Software update failed'.
+				"
+			::= { moduleSWUpdateEntry 4 }
+
+		
+-- Module registry consists of one or more tables to store
+-- different kind of maintenance or management information.
+-- 
+-- The tables do not affect on the operation of the module.
+-- They are used only to support management and they are 
+-- totally controlled by the manager.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.4
+		moduleRegistry OBJECT IDENTIFIER ::= { module 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.1
+		moduleSizeOfTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleSizeOfEntry
+			ACCESS not-accessible
+			STATUS optional
+			DESCRIPTION
+				"This table defines maximum number of entries 
+				in the registry tables. All the registry tables have
+				fixed size defined in this table."
+			::= { moduleRegistry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.1.1
+		moduleSizeOfEntry OBJECT-TYPE
+			SYNTAX ModuleSizeOfEntry
+			ACCESS not-accessible
+			STATUS optional
+			INDEX { moduleId }
+			::= { moduleSizeOfTable 1 }
+
+		
+		ModuleSizeOfEntry ::=
+			SEQUENCE { 
+				sizeOfRegistry
+					INTEGER,
+				sizeOfRepairlog
+					INTEGER,
+				sizeOfNotebook
+					INTEGER
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.4.1.1.1
+		sizeOfRegistry OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS mandatory
+			DESCRIPTION
+				"Max number of entries in the registryTable.
+				The entries in the registryTable are numbered
+				from 1..sizeofRegistry."
+			::= { moduleSizeOfEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.1.1.2
+		sizeOfRepairlog OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Max number of entries in the repairlogTable.
+				
+				First entry (oldest entry) is deleted, when a new 
+				entry is added and the table is full."
+			::= { moduleSizeOfEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.1.1.3
+		sizeOfNotebook OBJECT-TYPE
+			SYNTAX INTEGER
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Max number of entries in the notebookTable.
+				The lines in the notebookTable are numbered from
+				1..sizeofNotebook."
+			::= { moduleSizeOfEntry 3 }
+
+		
+-- 
+-- The moduleRegistryTable contains an indexed data storage 
+-- for each module. The Manager may use registry data for 
+-- various purposes.
+-- 
+		-- 1.3.6.1.4.1.3715.99.2.4.2
+		moduleRegistryTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleRegistryEntry
+			ACCESS not-accessible
+			STATUS optional
+			DESCRIPTION
+				"This table lists user data for all modules 
+				installed inside the element.
+				
+				Table is indexed by the moduleId and regIndex.
+				regIndex can have values 1..sizeofRegistry.
+				
+				A registryEntry is 'deleted' by setting its name
+				to an empty string."
+			::= { moduleRegistry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.2.1
+		moduleRegistryEntry OBJECT-TYPE
+			SYNTAX ModuleRegistryEntry
+			ACCESS not-accessible
+			STATUS optional
+			INDEX { moduleId, regIndex }
+			::= { moduleRegistryTable 1 }
+
+		
+		ModuleRegistryEntry ::=
+			SEQUENCE { 
+				regIndex
+					INTEGER,
+				regName
+					DisplayString,
+				regValue
+					DisplayString
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.4.2.1.1
+		regIndex OBJECT-TYPE
+			SYNTAX INTEGER (1..255)
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"A second index to registryTable.
+				Can have values 1..sizeofRegistryTable."
+			::= { moduleRegistryEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.2.1.2
+		regName OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Descriptive name for the parameter. 
+				
+				The agent is allowed to limit the length of the name. 
+				Minimum length of eight characters must be supported.
+				
+				Writing empty string to this object removes it from the
+				registryTable."
+			::= { moduleRegistryEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.2.1.3
+		regValue OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Textual information describing the parameter information.
+				 
+				The agent is allowed to limit the length of the name. 
+				Minimum length of eight characters must be supported."
+			::= { moduleRegistryEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.3
+		moduleRepairLogTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleRepairLogEntry
+			ACCESS not-accessible
+			STATUS optional
+			DESCRIPTION
+				"This table contains repair history entries for modules
+				in the element. The table is indexed with moduleId and 
+				repairLogDate.
+				
+				The table can have sizeofRepairlog number of entries. 
+				If this number is exceeded when writing a new entry, 
+				the oldest entry is deleted and and a new entry is added."
+			::= { moduleRegistry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.3.1
+		moduleRepairLogEntry OBJECT-TYPE
+			SYNTAX ModuleRepairLogEntry
+			ACCESS not-accessible
+			STATUS optional
+			DESCRIPTION
+				"Row entry in RepairLogTable.
+				
+				Note that it uses double index: moduleId  repairIndex. 
+				that uniquely identify each log entry. Rows for particular
+				module exist only if there is row, that represents this
+				module in the moduleTable. 
+				
+				A row is 'deleted' by giving a date 0000-00-00."
+			INDEX { moduleId, repairIndex }
+			::= { moduleRepairLogTable 1 }
+
+		
+		ModuleRepairLogEntry ::=
+			SEQUENCE { 
+				repairIndex
+					INTEGER,
+				repairDate
+					DisplayString,
+				repairReasonCode
+					OCTET STRING,
+				repairNameCode
+					OCTET STRING,
+				repairComment
+					DisplayString
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.4.3.1.1
+		repairIndex OBJECT-TYPE
+			SYNTAX INTEGER (1..32767)
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"Row number of the Repairlog entry. Can have values 
+				between 1..sizeOfRepairlog. This field is a second index
+				to moduleRepairLogTable."
+			::= { moduleRepairLogEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.3.1.2
+		repairDate OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Date of this repair entry formatted as CCYY-MM-DD."
+			::= { moduleRepairLogEntry 2 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.3.1.3
+		repairReasonCode OBJECT-TYPE
+			SYNTAX OCTET STRING (SIZE (4))
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Repair code for this entry."
+			::= { moduleRepairLogEntry 3 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.3.1.4
+		repairNameCode OBJECT-TYPE
+			SYNTAX OCTET STRING (SIZE (4))
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Repairer name code (initials) for this entry."
+			::= { moduleRepairLogEntry 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.3.1.5
+		repairComment OBJECT-TYPE
+			SYNTAX DisplayString
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Comment of the repair event.
+				The agent is allowed to truncate the length of the
+				comment, if it is too long to internal storage."
+			::= { moduleRepairLogEntry 5 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.4
+		moduleNotebookTable OBJECT-TYPE
+			SYNTAX SEQUENCE OF ModuleNotebookEntry
+			ACCESS not-accessible
+			STATUS optional
+			DESCRIPTION
+				"Notebook is a free text area for manager or serviceman 
+				notes. It is divided into 50 character long character
+				blocks or lines. Each line is an entry in the 
+				notebookTable.
+				
+				Indices are moduleName and lineNumber.
+				
+				A new line with the same lineNumber overwrites 
+				the old line."
+			::= { moduleRegistry 4 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.4.1
+		moduleNotebookEntry OBJECT-TYPE
+			SYNTAX ModuleNotebookEntry
+			ACCESS not-accessible
+			STATUS optional
+			INDEX { moduleId, notebookLineNumber }
+			::= { moduleNotebookTable 1 }
+
+		
+		ModuleNotebookEntry ::=
+			SEQUENCE { 
+				notebookLineNumber
+					INTEGER,
+				notebookLineText
+					OCTET STRING
+			 }
+
+		-- 1.3.6.1.4.1.3715.99.2.4.4.1.1
+		notebookLineNumber OBJECT-TYPE
+			SYNTAX INTEGER (1..255)
+			ACCESS read-only
+			STATUS optional
+			DESCRIPTION
+				"The line number of the notebookTextLine.
+				The number must be in between 1..sizeofNotebook.
+				inclusive. Numbers should be used consecutively."
+			::= { moduleNotebookEntry 1 }
+
+		
+		-- 1.3.6.1.4.1.3715.99.2.4.4.1.2
+		notebookLineText OBJECT-TYPE
+			SYNTAX OCTET STRING (SIZE (0..50))
+			ACCESS read-write
+			STATUS optional
+			DESCRIPTION
+				"Text field for storing notes about the module."
+			::= { moduleNotebookEntry 2 }
+
+		
+	
+	END
+
+--
+-- TELESTE-COMMON-MIB.mib
+--