diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/zte/ZTE-AN-ENVMON-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/zte/ZTE-AN-ENVMON-MIB')
| -rw-r--r-- | MIBS/zte/ZTE-AN-ENVMON-MIB | 2439 |
1 files changed, 2439 insertions, 0 deletions
diff --git a/MIBS/zte/ZTE-AN-ENVMON-MIB b/MIBS/zte/ZTE-AN-ENVMON-MIB new file mode 100644 index 0000000..62e89d3 --- /dev/null +++ b/MIBS/zte/ZTE-AN-ENVMON-MIB @@ -0,0 +1,2439 @@ +
+ZTE-AN-ENVMON-MIB DEFINITIONS ::= BEGIN
+ IMPORTS
+ RowStatus FROM SNMPv2-TC
+ DisplayString FROM SNMPv2-TC
+ TruthValue FROM SNMPv2-TC
+ DateAndTime FROM SNMPv2-TC
+ MODULE-IDENTITY FROM SNMPv2-SMI
+ OBJECT-TYPE FROM SNMPv2-SMI
+ Integer32 FROM SNMPv2-SMI
+ IpAddress FROM SNMPv2-SMI
+ Counter64 FROM SNMPv2-SMI
+ Unsigned32 FROM SNMPv2-SMI
+ NOTIFICATION-TYPE FROM SNMPv2-SMI
+ zxAccessNode FROM ZTE-AN-SMI
+ zxAnEquipment FROM ZTE-AN-SMI
+ MODULE-COMPLIANCE FROM SNMPv2-CONF
+ OBJECT-GROUP FROM SNMPv2-CONF
+ NOTIFICATION-GROUP FROM SNMPv2-CONF
+ TEXTUAL-CONVENTION FROM SNMPv2-TC
+ HCPerfCurrentCount FROM HC-PerfHist-TC-MIB;
+
+ zxAnEnvMonMib MODULE-IDENTITY
+ LAST-UPDATED "201412230000Z"
+ ORGANIZATION "ZTE Corporation"
+ CONTACT-INFO "Mei YuLing ZTE Corporation
+ Mail: mei.yuLing@zte.com.cn
+ Tel : +86-21-68897315"
+ DESCRIPTION "This MIB defines zte Access Node managed environment
+ monitor."
+ REVISION "201412230000Z"
+ DESCRIPTION
+ "modify the range of fan tray speed percentage."
+ REVISION "201312310000Z"
+ DESCRIPTION
+ "add fan tray SN configuration."
+ REVISION "201204270000Z"
+ DESCRIPTION
+ "add fan unified configuration."
+ REVISION "201204180000Z"
+ DESCRIPTION
+ "add overheat protection."
+ REVISION "201110170000Z"
+ DESCRIPTION
+ "add details of fan speed level."
+ REVISION "201105260000Z"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ ::= { zxAnEquipment 10 }
+
+ ZxAnEnvShutdownServiceType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A set of service type defined in environment monitor module
+ that may be shut down in protection action,
+ each bit refers to a type:
+ Bit 00 : xPON service.
+ Bit 01 : xDSL service.
+ Bit 02 : P2P service.
+ Bit 03 : narrowband service."
+ SYNTAX BITS {
+ xpon(0),
+ xdsl(1),
+ p2p(2),
+ narrowband(3)
+ }
+
+-------------------------------------------------------------------------------
+-- Following management objects are defined.
+-- 1. Environment Management Capability Table
+-- 2. Environment Temperature Table
+-- 3. Card Environment Performance Table
+--- 3.1. zxAnCardEnvParamTable
+--- 3.2. zxAnCardEnvHis15MinPerfTable
+--- 3.3. zxAnCardEnvHis1DayPerfTable
+--- 3.4. zxAnCardEnvAlmProfileConfTable
+--- 3.5. zxAnCardEnvAlmProfileApplyTable
+--- 3.6. zxAnCardEnvAlmProfileTable
+--- 3.7. zxAnEnvOverheatProtectTable
+--- 3.8. zxAnEnvCardOverheatProtectTable
+-- 4. Environment Interface Connection Management Table
+-- 5. Power Supply Management Table
+-- 6. Fan Management Objects
+-- 6.1 Fan Tray Control table
+-- 6.2 Fans Control And Operational Status table
+-- 6.3 Fan Tray Reset Objects
+-- 8. Environment Device Objects
+-- 9. Environment Device Switch Objects
+
+-- Following notification objects are defined.
+-- 21. zxAnEnvMonNotifications
+
+-- Following conformance information is defined.
+-- 31. zxAnEnvMonConformance
+
+-------------------------------------------------------------------------------
+
+ zxAnEnvMonGlobalObjects OBJECT IDENTIFIER::={zxAnEnvMonMib 1}
+ zxAnEnvMonObjects OBJECT IDENTIFIER::={zxAnEnvMonMib 2}
+ zxAnEnvMonNotifications OBJECT IDENTIFIER::={zxAnEnvMonMib 3}
+
+ zxAnEnvParamObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 1}
+ zxAnEnvMonInterfaceObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 2}
+ zxAnEnvPowerSupplyObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 3}
+ zxAnEnvFanObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 4}
+ zxAnEnvDeviceObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 5}
+
+ zxAnEnvFanTrayResetObjects OBJECT IDENTIFIER::={zxAnEnvFanObjects 12}
+
+ zxAnEnvParamGlobalObjects OBJECT IDENTIFIER::={zxAnEnvParamObjects 1}
+
+ zxAnPowerSupplyGlobalObjects
+ OBJECT IDENTIFIER ::= { zxAnEnvPowerSupplyObjects 1}
+
+ zxAnEnvMonTempTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 1}
+ zxAnEnvMonInterfaceTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 2}
+ zxAnEnvMonPowerSupplyTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 3}
+ zxAnEnvMonFanTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 4}
+ zxAnEnvDeviceTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 5}
+
+
+-------------------------------------------------------------------------------
+-- 1. Environment Management Capability Table
+-------------------------------------------------------------------------------
+ zxAnEnvMonCapabilities OBJECT-TYPE
+ SYNTAX BITS
+ {
+ envTemperature(0),
+ fanAlarmBeep(1),
+ fanAutoSwitchByCardInstall(2),
+ fanSpeedCtrlBasedTemperature(3),
+ fanFixSpeed(4),
+ singleFanShutdown(5),
+ mpTemperature(6),
+ powerSupply(7),
+ cardTemperature(8),
+ fanSpeedPercentage(9),
+ backplaneInterface(10),
+ envMonitorInterfaceTrapEnable(11),
+ slaveShelfFanConfig(12)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The environment management capabilities of this equipment.The bit
+ value 1 means the function represented by this bit is supported by
+ this equipment.
+
+ NOTE:
+ Not recommended to display it in NMS.
+ "
+ ::= { zxAnEnvMonGlobalObjects 1 }
+
+ zxAnEnvCardShutdownReason OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ envHighTemperature(1),
+ cardHighTemperature(2),
+ chipHighTemperature(3),
+ emergencyPowerSaving(4)
+ }
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The alarm reason of zxAnEnvCardShutdownAlm.
+ envHighTemperature(1): Environment temperature is too high.
+ cardHighTemperature(2):Card self temperature is too high.
+ chipHighTemperature(3):Card's chip temperature is too high.
+ emergencyPowerSaving(4):Emergency power saving action has been
+ taken caused by AC power failure.
+ "
+ ::= { zxAnEnvParamGlobalObjects 1 }
+-------------------------------------------------------------------------------
+-- 2. Environment Temperature Table
+-------------------------------------------------------------------------------
+ zxAnEnvParamTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnEnvParamEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes environment temperature information."
+ ::= { zxAnEnvParamObjects 5 }
+
+ zxAnEnvParamEntry OBJECT-TYPE
+ SYNTAX ZxAnEnvParamEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of zxAnEnvParamTable. "
+ INDEX { zxAnEnvRack, zxAnEnvShelf }
+ ::= { zxAnEnvParamTable 1 }
+
+ ZxAnEnvParamEntry ::= SEQUENCE {
+ zxAnEnvRack Integer32,
+ zxAnEnvShelf Integer32,
+ zxAnEnvTemp Integer32,
+ zxAnEnvTempHighAlmThreshold Integer32,
+ zxAnEnvTempCriticalAlmThreshold Integer32,
+ zxAnEnvTempLowAlmThreshold Integer32,
+ zxAnEnvShelfPowerConsumption Integer32,
+ zxAnEnvShelfVoltage Integer32,
+ zxAnEnvShelfCurrent Integer32
+ }
+
+ zxAnEnvRack OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The index of rack."
+ ::= { zxAnEnvParamEntry 1 }
+
+ zxAnEnvShelf OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The index of shelf."
+ ::= { zxAnEnvParamEntry 2 }
+
+ zxAnEnvTemp OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Centigrade"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The temperature of the environment."
+ ::= { zxAnEnvParamEntry 3 }
+
+ zxAnEnvTempHighAlmThreshold OBJECT-TYPE
+ SYNTAX Integer32(45..95)
+ UNITS "Centigrade"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The temperature high alarm threshold of the environment."
+ DEFVAL { 75 }
+ ::= { zxAnEnvParamEntry 4 }
+
+ zxAnEnvTempCriticalAlmThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Centigrade"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The temperature critical alarm threshold of the environment."
+ DEFVAL { 100 }
+ ::= { zxAnEnvParamEntry 5 }
+
+ zxAnEnvTempLowAlmThreshold OBJECT-TYPE
+ SYNTAX Integer32(-40..0)
+ UNITS "Centigrade"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The temperature low alarm threshold of the environment."
+ ::= { zxAnEnvParamEntry 6 }
+
+ zxAnEnvShelfPowerConsumption OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001W"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power consumption of the shelf.
+ Value 0 means not available."
+ ::= { zxAnEnvParamEntry 7 }
+
+ zxAnEnvShelfVoltage OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001Volts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Voltage of the shelf.
+ Value 0 means not available."
+ ::= { zxAnEnvParamEntry 8 }
+
+ zxAnEnvShelfCurrent OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001Amp"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current of the shelf.
+ Value 0 means not available."
+ ::= { zxAnEnvParamEntry 9 }
+
+
+-------------------------------------------------------------------------------
+-- 3. Card Environment Performance Table
+-- 3.1. zxAnCardEnvParamTable
+-------------------------------------------------------------------------------
+
+ zxAnCardEnvParamTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnCardEnvParamEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes card temperature information."
+ ::= { zxAnEnvParamObjects 6 }
+
+ zxAnCardEnvParamEntry OBJECT-TYPE
+ SYNTAX ZxAnCardEnvParamEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of zxAnCardEnvParamTable. "
+ INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
+ ::= { zxAnCardEnvParamTable 1 }
+
+ ZxAnCardEnvParamEntry ::= SEQUENCE {
+ zxAnEnvSlot Integer32,
+ zxAnCardTemp Integer32,
+ zxAnCardPowerConsumption Integer32,
+ zxAnCardVoltage Integer32,
+ zxAnCardCurrent Integer32,
+ zxAnCardCriticalTempAlmThreshold Integer32,
+ zxAnCardOptHighestTemp Integer32,
+ zxAnCardOptCriticalTempAlmThresh Integer32,
+ zxAnCardOptHighestTempPortNo Integer32,
+ zxAnCardHeatRadiationAlmThresh Integer32
+ }
+
+ zxAnEnvSlot OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "The index of slot, the range is [0,20] of 19-inch
+ shelf and [0,22] of 21-inch shelf."
+ ::= { zxAnCardEnvParamEntry 1 }
+
+ zxAnCardTemp OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current temperature of the card environment.
+
+ NOTE:
+ 1. In current system, only certain cards support
+ temperature-reading, such as SCXL, GTGOD cards.
+ 2. If the card is not configured, we cannot get its
+ temperature.
+ 3. For the configured but not support temperature-reading
+ cards, we use -1000 as an invalid temperature value to note
+ its temperature.
+ "
+ ::= { zxAnCardEnvParamEntry 2 }
+
+ zxAnCardPowerConsumption OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001W"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power consumption of the card.
+ Value 0 means not available."
+ ::= { zxAnCardEnvParamEntry 3 }
+
+ zxAnCardVoltage OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001Volts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Voltage of the card.
+ Value 0 means not available."
+ ::= { zxAnCardEnvParamEntry 4 }
+
+ zxAnCardCurrent OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001Amp"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current of the card.
+ Value 0 means not available."
+ ::= { zxAnCardEnvParamEntry 5 }
+
+ zxAnCardCriticalTempAlmThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Centigrade"
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The critical temperature alarm threshold of the card."
+ ::= { zxAnCardEnvParamEntry 6 }
+
+ zxAnCardOptHighestTemp OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001Degrees"
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The highest temperature of the optical modules in the card."
+ ::= { zxAnCardEnvParamEntry 7 }
+
+ zxAnCardOptCriticalTempAlmThresh OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Centigrade"
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The critical optical temperature alarm threshold."
+ ::= { zxAnCardEnvParamEntry 8 }
+
+ zxAnCardOptHighestTempPortNo OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The port No. which the optical module is located at, and the
+ optical module has the highest temperature."
+ ::= { zxAnCardEnvParamEntry 9 }
+
+ zxAnCardHeatRadiationAlmThresh OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Centigrade"
+ MAX-ACCESS accessible-for-notify
+ STATUS current
+ DESCRIPTION
+ "The heat radiation abnormal alarm threshold of the card."
+ ::= { zxAnCardEnvParamEntry 10 }
+
+-------------------------------------------------------------------------------
+-- 3.2. zxAnCardEnvHis15MinPerfTable
+-------------------------------------------------------------------------------
+
+ zxAnCardEnvHis15MinPerfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnCardEnvHis15MinPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 15 minutes interval performance data table of card
+ temperature."
+ ::= { zxAnEnvParamObjects 7 }
+
+ zxAnCardEnvHis15MinPerfEntry OBJECT-TYPE
+ SYNTAX ZxAnCardEnvHis15MinPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 15 minutes interval performance data entry of card
+ temperature."
+ INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot,
+ zxAnCardEnvHis15MinIntervalNo }
+ ::= { zxAnCardEnvHis15MinPerfTable 1 }
+
+ ZxAnCardEnvHis15MinPerfEntry ::= SEQUENCE {
+ zxAnCardEnvHis15MinIntervalNo Integer32,
+ zxAnCardEnvHis15MinDateTime DateAndTime,
+ zxAnCardEnvHis15MinTemp Counter64
+ }
+
+ zxAnCardEnvHis15MinIntervalNo OBJECT-TYPE
+ SYNTAX Integer32(1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Performance data interval number 1 is the the most recent
+ previous interval; interval 96 is 24 hours ago.
+ Intervals 2..96 are optional."
+ ::= { zxAnCardEnvHis15MinPerfEntry 1 }
+
+ zxAnCardEnvHis15MinDateTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 15 minutes interval performance data generation time."
+ ::= { zxAnCardEnvHis15MinPerfEntry 2 }
+
+ zxAnCardEnvHis15MinTemp OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 15 minutes interval average temperature of card."
+ ::= { zxAnCardEnvHis15MinPerfEntry 3 }
+
+-------------------------------------------------------------------------------
+-- 3.3. zxAnCardEnvHis1DayPerfTable
+-------------------------------------------------------------------------------
+
+ zxAnCardEnvHis1DayPerfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnCardEnvHis1DayPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 1 day interval performance data table of card temperature."
+ ::= { zxAnEnvParamObjects 8 }
+
+ zxAnCardEnvHis1DayPerfEntry OBJECT-TYPE
+ SYNTAX ZxAnCardEnvHis1DayPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The 1 day interval performance data entry of card temperature."
+ INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot,
+ zxAnCardEnvHis1DayIntervalNo }
+ ::= { zxAnCardEnvHis1DayPerfTable 1 }
+
+ ZxAnCardEnvHis1DayPerfEntry ::= SEQUENCE {
+ zxAnCardEnvHis1DayIntervalNo Integer32,
+ zxAnCardEnvHis1DayDateTime DateAndTime,
+ zxAnCardEnvHis1DayTemp Counter64
+ }
+
+ zxAnCardEnvHis1DayIntervalNo OBJECT-TYPE
+ SYNTAX Integer32(1..7)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Performance data interval number 1 is the the most recent
+ previous interval; interval 7 is 1 week ago.
+ Intervals 2..7 are optional."
+ ::= { zxAnCardEnvHis1DayPerfEntry 1 }
+
+ zxAnCardEnvHis1DayDateTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 1 day interval performance data generation time."
+ ::= { zxAnCardEnvHis1DayPerfEntry 2 }
+
+ zxAnCardEnvHis1DayTemp OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The 1 day interval average temperature of card."
+ ::= { zxAnCardEnvHis1DayPerfEntry 3 }
+
+-------------------------------------------------------------------------------
+-- 3.4. zxAnCardEnvAlmProfileConfTable
+-------------------------------------------------------------------------------
+
+ zxAnCardEnvAlmProfileConfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The performance alarm threshold profile items configuration table
+ of card temperature."
+ ::= { zxAnEnvParamObjects 9 }
+
+ zxAnCardEnvAlmProfileConfEntry OBJECT-TYPE
+ SYNTAX ZxAnCardEnvAlmProfileConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The performance alarm threshold profile items configuration entry
+ of card temperature."
+ INDEX { zxAnCardEnvAlmProfileName, zxAnCardEnvPerfVariable }
+ ::= { zxAnCardEnvAlmProfileConfTable 1 }
+
+ ZxAnCardEnvAlmProfileConfEntry ::= SEQUENCE {
+ zxAnCardEnvAlmProfileName DisplayString,
+ zxAnCardEnvPerfVariable OBJECT IDENTIFIER,
+ zxAnCardEnvRiseAlmThresh HCPerfCurrentCount,
+ zxAnCardEnvClrRiseAlmThresh HCPerfCurrentCount,
+ zxAnCardEnvRiseWarnThresh HCPerfCurrentCount,
+ zxAnCardEnvClrRiseWarnThresh HCPerfCurrentCount,
+ zxAnCardEnvFallWarnThresh HCPerfCurrentCount,
+ zxAnCardEnvClrFallWarnThresh HCPerfCurrentCount,
+ zxAnCardEnvFallAlmThresh HCPerfCurrentCount,
+ zxAnCardEnvClrFallAlmThresh HCPerfCurrentCount,
+ zxAnCardEnvAlmPrfConfRowStatus RowStatus
+ }
+
+ zxAnCardEnvAlmProfileName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(1..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The performance alarm threshold profile name."
+ ::= { zxAnCardEnvAlmProfileConfEntry 1 }
+
+ zxAnCardEnvPerfVariable OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The object identifier of performance variables."
+ ::= { zxAnCardEnvAlmProfileConfEntry 2 }
+
+ zxAnCardEnvRiseAlmThresh OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The threshold for rising alarm."
+ ::= { zxAnCardEnvAlmProfileConfEntry 3 }
+
+ zxAnCardEnvClrRiseAlmThresh OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The threshold for rising alarm restore."
+ ::= { zxAnCardEnvAlmProfileConfEntry 4 }
+
+ zxAnCardEnvRiseWarnThresh OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The threshold for rising warning."
+ ::= { zxAnCardEnvAlmProfileConfEntry 5 }
+
+ zxAnCardEnvClrRiseWarnThresh OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The threshold for rising warning restore."
+ ::= { zxAnCardEnvAlmProfileConfEntry 6 }
+
+ zxAnCardEnvFallWarnThresh OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The threshold for falling warning."
+ ::= { zxAnCardEnvAlmProfileConfEntry 7 }
+
+ zxAnCardEnvClrFallWarnThresh OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The threshold for falling warning restore."
+ ::= { zxAnCardEnvAlmProfileConfEntry 8 }
+
+ zxAnCardEnvFallAlmThresh OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The threshold for falling alarm."
+ ::= { zxAnCardEnvAlmProfileConfEntry 9 }
+
+ zxAnCardEnvClrFallAlmThresh OBJECT-TYPE
+ SYNTAX HCPerfCurrentCount
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The threshold for falling alarm restore."
+ ::= { zxAnCardEnvAlmProfileConfEntry 10 }
+
+ zxAnCardEnvAlmPrfConfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+ set this object to createAndGo(4).
+
+ To delete a row in this table, a manager must
+ set this object to destroy(6). "
+ ::= { zxAnCardEnvAlmProfileConfEntry 50 }
+
+-------------------------------------------------------------------------------
+-- 3.5. zxAnCardEnvAlmProfileApplyTable
+-------------------------------------------------------------------------------
+
+ zxAnCardEnvAlmProfileApplyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileApplyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The performance alarm threshold profile application table of
+ card temperature."
+ ::= { zxAnEnvParamObjects 10 }
+
+ zxAnCardEnvAlmProfileApplyEntry OBJECT-TYPE
+ SYNTAX ZxAnCardEnvAlmProfileApplyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The performance alarm threshold profile application entry of
+ card temperature."
+ INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
+ ::= { zxAnCardEnvAlmProfileApplyTable 1 }
+
+ ZxAnCardEnvAlmProfileApplyEntry ::= SEQUENCE {
+ zxAnCardEnvAlmPrf DisplayString,
+ zxAnCardEnvAlmPrfApplyRowStatus RowStatus
+ }
+
+ zxAnCardEnvAlmPrf OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The performance alarm threshold profile."
+ ::= { zxAnCardEnvAlmProfileApplyEntry 1 }
+
+ zxAnCardEnvAlmPrfApplyRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+ set this object to createAndGo(4).
+
+ To delete a row in this table, a manager must
+ set this object to destroy(6). "
+ ::= { zxAnCardEnvAlmProfileApplyEntry 50 }
+
+
+-------------------------------------------------------------------------------
+-- 3.6. zxAnCardEnvAlmProfileTable
+-------------------------------------------------------------------------------
+
+ zxAnCardEnvAlmProfileTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The performance alarm threshold profile table of card
+ temperature."
+ ::= { zxAnEnvParamObjects 11 }
+
+ zxAnCardEnvAlmProfileEntry OBJECT-TYPE
+ SYNTAX ZxAnCardEnvAlmProfileEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The performance alarm threshold profile entry of
+ card temperature."
+ INDEX { zxAnCardEnvAlmProfileName }
+ ::= { zxAnCardEnvAlmProfileTable 1 }
+
+ ZxAnCardEnvAlmProfileEntry ::= SEQUENCE {
+ zxAnCardEnvAlmPrfRowStatus RowStatus
+ }
+
+ zxAnCardEnvAlmPrfRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ To create a row in this table, a manager must
+ set this object to createAndGo(4).
+
+ To delete a row in this table, a manager must
+ set this object to destroy(6). "
+ ::= { zxAnCardEnvAlmProfileEntry 50 }
+
+-------------------------------------------------------------------------------
+--- 3.7. zxAnEnvOverheatProtectTable
+-------------------------------------------------------------------------------
+ zxAnEnvOverheatProtectTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnEnvOverheatProtectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Environment overheat protection table."
+ ::= { zxAnEnvParamObjects 13 }
+
+ zxAnEnvOverheatProtectEntry OBJECT-TYPE
+ SYNTAX ZxAnEnvOverheatProtectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Environment overheat protection entry.
+
+ To modify zxAnEnvOverheatProtectEnable from disabled to enabled,
+ zxAnEnvOverheatProtectEnable is mandatory,
+ zxAnEnvOverheatProtectDelay is optional.
+
+ To modify zxAnEnvOverheatProtectEnable from enabled to disabled,
+ only zxAnEnvOverheatProtectEnable is mandatory."
+ INDEX { zxAnEnvRack, zxAnEnvShelf }
+ ::= { zxAnEnvOverheatProtectTable 1 }
+
+ ZxAnEnvOverheatProtectEntry ::= SEQUENCE {
+ zxAnEnvOverheatProtectEnable INTEGER,
+ zxAnEnvOverheatProtectDelay Integer32,
+ zxAnEnvOverheatProtectFirstStep ZxAnEnvShutdownServiceType,
+ zxAnEnvOverheatProtectSecondStep ZxAnEnvShutdownServiceType
+ }
+
+ zxAnEnvOverheatProtectEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables the environment overheat protection function."
+ DEFVAL { disabled }
+ ::= { zxAnEnvOverheatProtectEntry 1 }
+
+ zxAnEnvOverheatProtectDelay OBJECT-TYPE
+ SYNTAX Integer32(1..60)
+ UNITS "minutes"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The delaying time between two steps.
+ For example, when temperature is higher than the threshold, takes an
+ action as the step 1, and delays the value of
+ zxAnEnvOverheatProtectDelay, if the temperature is still higher than
+ the threshold, takes an action as step 2."
+ DEFVAL { 10 }
+ ::= { zxAnEnvOverheatProtectEntry 2 }
+
+ zxAnEnvOverheatProtectFirstStep OBJECT-TYPE
+ SYNTAX ZxAnEnvShutdownServiceType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The first step when the environment temperature exceeds
+ zxAnEnvTempHighAlmThreshold."
+ DEFVAL { {xpon,xdsl,p2p} }
+ ::= { zxAnEnvOverheatProtectEntry 3 }
+
+ zxAnEnvOverheatProtectSecondStep OBJECT-TYPE
+ SYNTAX ZxAnEnvShutdownServiceType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The second step when the environment temperature still exceeds
+ zxAnEnvTempHighAlmThreshold after first step has been done."
+ DEFVAL { {narrowband} }
+ ::= { zxAnEnvOverheatProtectEntry 4 }
+
+-------------------------------------------------------------------------------
+--- 3.8. zxAnEnvCardOverheatProtectTable
+-------------------------------------------------------------------------------
+ zxAnEnvCardOverheatProtectTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnEnvCardOverheatProtectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Card overheat protection table."
+ ::= { zxAnEnvParamObjects 14 }
+
+ zxAnEnvCardOverheatProtectEntry OBJECT-TYPE
+ SYNTAX ZxAnEnvCardOverheatProtectEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Card overheat protection entry."
+ INDEX { zxAnEnvRack, zxAnEnvShelf }
+ ::= { zxAnEnvCardOverheatProtectTable 1 }
+
+ ZxAnEnvCardOverheatProtectEntry ::= SEQUENCE {
+ zxAnEnvCardCriticalTempProtectEn INTEGER
+ }
+
+ zxAnEnvCardCriticalTempProtectEn OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables the card critical temperature protection
+ function. If it is enabled, the card will be stopped when the card
+ temperature is higher than the card critical temperature."
+ DEFVAL { enabled }
+ ::= { zxAnEnvCardOverheatProtectEntry 1 }
+
+-------------------------------------------------------------------------------
+-- 4. Environment Interface Connection Management Table
+-------------------------------------------------------------------------------
+ zxAnEnvMonInterfaceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnEnvMonInterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes the environment interface information."
+ ::= { zxAnEnvMonInterfaceObjects 5 }
+
+ zxAnEnvMonInterfaceEntry OBJECT-TYPE
+ SYNTAX ZxAnEnvMonInterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of zxAnEnvMonInterfaceTable. "
+ INDEX { zxAnEnvRack, zxAnEnvShelf }
+ ::= { zxAnEnvMonInterfaceTable 1 }
+
+ ZxAnEnvMonInterfaceEntry ::= SEQUENCE {
+ zxAnEnvMonInterfaceUsage INTEGER,
+ zxAnEnvEpmConnectPort INTEGER,
+ zxAnEnvBackplaneInterfaceUsage INTEGER
+ }
+
+ zxAnEnvMonInterfaceUsage OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ epm(1),
+ fanTray(2),
+ noUse(3),
+ noSupport(4),
+ etmWithTestSubcard(5),
+ etmWithoutTestSubcard(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The equipment type connected to the environment monitor interface.
+ "
+ DEFVAL { fanTray }
+ ::= { zxAnEnvMonInterfaceEntry 1 }
+
+ zxAnEnvEpmConnectPort OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ port0(1),
+ port1(2),
+ notconfigured(255)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The port no which epm connect"
+ ::= { zxAnEnvMonInterfaceEntry 2 }
+
+ zxAnEnvBackplaneInterfaceUsage OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ fan(1),
+ noUse(3),
+ noSupport(255)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The equipment type connected to the Backplane Interface.
+ fan(1): the fan connect to the Backplane Interface;
+ noUse(3): not used;
+ noSupport(255):not support.
+ "
+ ::= { zxAnEnvMonInterfaceEntry 3 }
+
+-------------------------------------------------------------------------------
+-- 5. Power Supply Management Table
+-------------------------------------------------------------------------------
+ zxAnEnvEmergencyPowerSaveEnable OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables the emergency power saving."
+ DEFVAL { disabled }
+ ::= { zxAnPowerSupplyGlobalObjects 1 }
+
+ zxAnEnvEmergencyPowerSaveDelay OBJECT-TYPE
+ SYNTAX Integer32(0..1440)
+ UNITS "Minutes"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If AC power failure lasts more than zxAnEnvEmergencyPowerSaveDelay,
+ emergency power saving action will be taken."
+ DEFVAL { 60 }
+ ::= { zxAnPowerSupplyGlobalObjects 2 }
+
+ zxAnEnvEmergencyPowerSaveRecover OBJECT-TYPE
+ SYNTAX Integer32(0..1440)
+ UNITS "Minutes"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If AC power recovered, after this delay, the emergency power save
+ action will be cancelled."
+ DEFVAL { 0 }
+ ::= { zxAnPowerSupplyGlobalObjects 3 }
+
+ zxAnEnvEmergencyPowerSaveSvcType OBJECT-TYPE
+ SYNTAX ZxAnEnvShutdownServiceType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The service types will be shut down in emergency power saving
+ action."
+ DEFVAL { {xpon, xdsl, p2p} }
+ ::= { zxAnPowerSupplyGlobalObjects 4 }
+
+ zxAnEnvPowerMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ normal(1),
+ battery(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The current power supply mode of the equipment, emergency power
+ saving action is on the basis of the power mode zxAnEnvPowerMode.
+ normal(1) means using AC power as power supply.
+ battery(2) means using storage battery as power supply.
+ "
+ DEFVAL { normal }
+ ::= { zxAnPowerSupplyGlobalObjects 5 }
+
+ zxAnEnvEmergencyBatteryVoltage OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001Volts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current voltage of the battery."
+ ::= { zxAnPowerSupplyGlobalObjects 6 }
+
+ zxAnEnvEmergencyBatteryThreshold OBJECT-TYPE
+ SYNTAX Integer32(45000..53000)
+ UNITS "0.001Volts"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The threshold of the battery voltage.
+ If the battery voltage is less than
+ zxAnEnvEmergencyBatteryThreshold, the emergency power saving action
+ will be taken."
+ DEFVAL { 48000 }
+ ::= { zxAnPowerSupplyGlobalObjects 7 }
+
+ zxAnPowerSupplyCapabilityTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnPowerSupplyCapabilityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes power supply capability table."
+ ::= { zxAnEnvPowerSupplyObjects 10 }
+
+ zxAnPowerSupplyCapabilityEntry OBJECT-TYPE
+ SYNTAX ZxAnPowerSupplyCapabilityEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of zxAnPowerSupplyCapabilityTable."
+ INDEX { zxAnEnvRack, zxAnEnvShelf }
+ ::= { zxAnPowerSupplyCapabilityTable 1 }
+
+ ZxAnPowerSupplyCapabilityEntry ::= SEQUENCE
+ {
+ zxAnPowerSupplyMaxPowerNum Integer32
+ }
+
+ zxAnPowerSupplyMaxPowerNum OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The max number of power supply in the equipment."
+ ::= { zxAnPowerSupplyCapabilityEntry 1 }
+
+--- Power supply table
+
+ zxAnPowerSupplyTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnPowerSupplyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes power supply table."
+ ::= { zxAnEnvPowerSupplyObjects 11 }
+
+ zxAnPowerSupplyEntry OBJECT-TYPE
+ SYNTAX ZxAnPowerSupplyEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in zxAnPowerSupplyTable."
+ INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
+ ::= { zxAnPowerSupplyTable 1 }
+
+ ZxAnPowerSupplyEntry ::= SEQUENCE
+ {
+ zxAnPowerSupplyOperStatus INTEGER,
+ zxAnPowerSupplyInVoltage Integer32,
+ zxAnPowerSupplyInVoltageStatus INTEGER,
+ zxAnPowerInVoltageUpperThresh Integer32,
+ zxAnPowerInVoltageLowerThresh Integer32,
+ zxAnPowerSupplyInCurrent Integer32,
+ zxAnPowerInCurrentThresh Integer32
+ }
+
+ zxAnPowerSupplyOperStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ inService(1),
+ hwOffline(2),
+ powerFaulty(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The operational status of the power supply module."
+ ::= { zxAnPowerSupplyEntry 1 }
+
+ zxAnPowerSupplyInVoltage OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Volts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual input volts of the power supply module."
+ ::= { zxAnPowerSupplyEntry 2 }
+
+ zxAnPowerSupplyInVoltageStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ normal(1),
+ overVoltage(2),
+ underVoltage(3),
+ off(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The volt status of the power supply.
+
+ normal(1) -- The input power is normal.
+ overVoltage(2) -- The input power is over voltage.
+ underVoltage(3) -- The input power is under voltage.
+ off(4)) -- No power input.
+ "
+ ::= { zxAnPowerSupplyEntry 3 }
+
+ zxAnPowerInVoltageUpperThresh OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Volts"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper threshold of input volts.The alarm should be generated
+ when zxAnPowerSupplyInVoltage exceeds this threshold.
+ If it is 0, no alarm reported to manager."
+ DEFVAL { 0 }
+ ::= { zxAnPowerSupplyEntry 4 }
+
+
+ zxAnPowerInVoltageLowerThresh OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Volts"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The lower threshold of input volts.The alarm should be generated
+ when zxAnPowerSupplyInVoltage is lower than this threshold.
+ If it is 0, no alarm reported to manager."
+ DEFVAL { 0 }
+ ::= { zxAnPowerSupplyEntry 5 }
+
+
+ zxAnPowerSupplyInCurrent OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Amp"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual current of the power supply module."
+ ::= { zxAnPowerSupplyEntry 6 }
+
+
+ zxAnPowerInCurrentThresh OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Amp"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The upper threshold of input current.The alarm should be generated
+ when zxAnPowerSupplyInCurrent exceeds this threshold.
+ If it is 0, no alarm reported to manager."
+ DEFVAL { 0 }
+ ::= { zxAnPowerSupplyEntry 7 }
+
+-------------------------------------------------------------------------------
+-- 6. Fan Management Objects
+-- 6.1 Fan Tray Control table
+-------------------------------------------------------------------------------
+
+ zxAnEnvFanTrayTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnEnvFanTrayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The Fan Tray Control table, with rack and shelf information."
+ ::= { zxAnEnvFanObjects 10 }
+
+ zxAnEnvFanTrayEntry OBJECT-TYPE
+ SYNTAX ZxAnEnvFanTrayEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the zxAnEnvFanTrayTable."
+ INDEX { zxAnEnvRack, zxAnEnvShelf }
+ ::= { zxAnEnvFanTrayTable 1 }
+
+ ZxAnEnvFanTrayEntry ::= SEQUENCE
+ { zxAnFanTrayAlarmBeepEnable INTEGER,
+ zxAnFanTrayAutoSwitchByCardUp INTEGER,
+ zxAnFanTrayHardwareVersion DisplayString,
+ zxAnFanTraySoftwareVersion DisplayString,
+ zxAnFanTraySpeedCtrlMode INTEGER,
+ zxAnFanTrayLowSpeed Integer32,
+ zxAnFanTrayStdSpeed Integer32,
+ zxAnFanTrayHighSpeed Integer32,
+ zxAnFanTraySuperSpeed Integer32,
+ zxAnFanTrayLowSpeedShiftTemp Integer32,
+ zxAnFanTrayStdSpeedShiftTemp Integer32,
+ zxAnFanTrayHighSpeedShiftTemp Integer32,
+ zxAnFanTraySuperSpeedShiftTemp Integer32,
+ zxAnFanTrayLowSpeedPercent INTEGER,
+ zxAnFanTrayStdSpeedPercent INTEGER,
+ zxAnFanTrayHighSpeedPercent INTEGER,
+ zxAnFanTraySuperSpeedPercent INTEGER,
+ zxAnFanTrayAdminStatus INTEGER,
+ zxAnFanTrayConfSpeedLevel INTEGER,
+ zxAnFanTrayPowerConsumption Integer32,
+ zxAnFanTraySn DisplayString,
+ zxAnFanTrayVoltage Integer32,
+ zxAnFanTrayCurrent Integer32,
+ zxAnFanTrayTemp Integer32
+ }
+
+ zxAnFanTrayAlarmBeepEnable OBJECT-TYPE
+ SYNTAX INTEGER{
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The control status of the fan alarm beep."
+ DEFVAL { enable }
+ ::= { zxAnEnvFanTrayEntry 1 }
+
+ zxAnFanTrayAutoSwitchByCardUp OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enable/disable fan auto switch with card installation. If it is
+ enabled, the fan under the card should be switched to running
+ status when the card is installed. Otherwise, the fan should be
+ shutdown.
+ "
+ DEFVAL { disable }
+ ::= { zxAnEnvFanTrayEntry 2 }
+
+ zxAnFanTrayHardwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The hardware version of the fan tray"
+ ::= { zxAnEnvFanTrayEntry 3 }
+
+ zxAnFanTraySoftwareVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The software version of the fan tray"
+ ::= { zxAnEnvFanTrayEntry 4 }
+
+ zxAnFanTraySpeedCtrlMode OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ temperatureBasedAutoCtrl(1),
+ fixSpeed(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The speed control mode of the fan.
+ When this value is fixSpeed,zxAnFanTrayAdminStatus,
+ zxAnFanTrayConfSpeedLevel,zxAnEnvFanAdminStatus and
+ zxAnEnvFanConfSpeedLevel can be configured."
+ DEFVAL { temperatureBasedAutoCtrl }
+ ::= { zxAnEnvFanTrayEntry 5 }
+
+ zxAnFanTrayLowSpeed OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "RPM"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The speed value of the fan's low speed level.
+ The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
+ 4000,4400.
+ NOTE:
+ Different equipment maybe has different default value.
+ "
+ ::= { zxAnEnvFanTrayEntry 6 }
+
+ zxAnFanTrayStdSpeed OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "RPM"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The speed value of the fan's standard speed level.
+ The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
+ 4000,4400.
+ NOTE:
+ Different equipment maybe has different default value.
+ "
+ ::= { zxAnEnvFanTrayEntry 7 }
+
+ zxAnFanTrayHighSpeed OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "RPM"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The speed value of the fan's high speed level.
+ The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
+ 4000,4400.
+ NOTE:
+ Different equipment maybe has different default value.
+ "
+ ::= { zxAnEnvFanTrayEntry 8 }
+
+ zxAnFanTraySuperSpeed OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "RPM"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The speed value of the fan's super speed level.
+ The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
+ 4000,4400.
+ NOTE:
+ Different equipment maybe has different default value.
+ "
+ ::= { zxAnEnvFanTrayEntry 9 }
+
+ zxAnFanTrayLowSpeedShiftTemp OBJECT-TYPE
+ SYNTAX Integer32(0..55)
+ UNITS "centigrade"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The temperature to activate the fan tray to shift to
+ the low speed level.
+ "
+ ::= { zxAnEnvFanTrayEntry 10 }
+
+ zxAnFanTrayStdSpeedShiftTemp OBJECT-TYPE
+ SYNTAX Integer32(5..60)
+ UNITS "centigrade"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The temperature to activate the fan tray to shift to
+ the standard speed level.
+ "
+ ::= { zxAnEnvFanTrayEntry 11 }
+
+ zxAnFanTrayHighSpeedShiftTemp OBJECT-TYPE
+ SYNTAX Integer32(10..65)
+ UNITS "centigrade"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The temperature to activate the fan tray to shift to
+ the high speed level.
+ "
+ ::= { zxAnEnvFanTrayEntry 12 }
+
+ zxAnFanTraySuperSpeedShiftTemp OBJECT-TYPE
+ SYNTAX Integer32(15..70)
+ UNITS "centigrade"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The temperature to activate the fan tray to shift to
+ the super speed level.
+ "
+ ::= { zxAnEnvFanTrayEntry 13 }
+
+ zxAnFanTrayLowSpeedPercent OBJECT-TYPE
+ SYNTAX INTEGER(10..97)
+ UNITS "percent"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The percentage of speed of the low speed level."
+ DEFVAL{30}
+ ::= { zxAnEnvFanTrayEntry 14 }
+
+ zxAnFanTrayStdSpeedPercent OBJECT-TYPE
+ SYNTAX INTEGER(11..98)
+ UNITS "percent"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The percentage of speed of the standard speed level."
+ DEFVAL{50}
+ ::= { zxAnEnvFanTrayEntry 15 }
+
+
+ zxAnFanTrayHighSpeedPercent OBJECT-TYPE
+ SYNTAX INTEGER(12..99)
+ UNITS "percent"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The percentage of speed of the high speed level."
+ DEFVAL{70}
+ ::= { zxAnEnvFanTrayEntry 16 }
+
+ zxAnFanTraySuperSpeedPercent OBJECT-TYPE
+ SYNTAX INTEGER(13..100)
+ UNITS "percent"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The percentage of speed of the super speed level."
+ DEFVAL{90}
+ ::= { zxAnEnvFanTrayEntry 17 }
+
+ zxAnFanTrayAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ up(1),
+ down(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The administrative status of the fan tray.
+ When zxAnFanTrayAdminStatus is configured, all the
+ zxAnEnvFanAdminStatus values are consistent with
+ zxAnFanTrayAdminStatus."
+ DEFVAL { up }
+ ::= { zxAnEnvFanTrayEntry 18 }
+
+ zxAnFanTrayConfSpeedLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ lowSpeed (1),
+ standardSpeed(2),
+ highSpeed (3),
+ superSpeed (4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "The configured speed level of the fan tray.
+ When zxAnFanTrayConfSpeedLevel is configured, all the
+ zxAnEnvFanConfSpeedLevel values are consistent with
+ zxAnFanTrayConfSpeedLevel.
+ This variable is valid if zxAnFanTrayAdminStatus is up."
+ DEFVAL { standardSpeed }
+ ::= { zxAnEnvFanTrayEntry 19 }
+
+ zxAnFanTrayPowerConsumption OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001W"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Power consumption of the fan tray.
+ Value 0 means not available."
+ ::= { zxAnEnvFanTrayEntry 20 }
+
+ zxAnFanTraySn OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..12))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The serial number of fan tray."
+ DEFVAL { "" }
+ ::= { zxAnEnvFanTrayEntry 21 }
+
+ zxAnFanTrayVoltage OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001Volts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Voltage of the fan tray.
+ Value 0 means not available."
+ ::= { zxAnEnvFanTrayEntry 22 }
+
+ zxAnFanTrayCurrent OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "0.001Amp"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Current of the fan tray.
+ Value 0 means not available."
+ ::= { zxAnEnvFanTrayEntry 23 }
+
+ zxAnFanTrayTemp OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Centigrade"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The temperature of the fan tray."
+ ::= { zxAnEnvFanTrayEntry 24 }
+-------------------------------------------------------------------------------
+-- 6.2 Fans Control And Operational Status table
+-------------------------------------------------------------------------------
+
+ zxAnEnvFanTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnEnvFanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes speed information and operational status of
+ the fan units."
+ ::= { zxAnEnvFanObjects 11 }
+
+ zxAnEnvFanEntry OBJECT-TYPE
+ SYNTAX ZxAnEnvFanEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of zxAnEnvFanTable. "
+ INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvFanIndex }
+ ::= { zxAnEnvFanTable 1 }
+
+ ZxAnEnvFanEntry ::= SEQUENCE {
+ zxAnEnvFanIndex Integer32,
+ zxAnEnvFanConfSpeedLevel INTEGER,
+ zxAnEnvFanActualSpeedLevel INTEGER,
+ zxAnEnvFanAdminStatus INTEGER,
+ zxAnEnvFanOperStatus INTEGER,
+ zxAnEnvFanOnlineStatus INTEGER,
+ zxAnEnvFanActualSpeed Integer32
+ }
+ zxAnEnvFanIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The index of this fan unit.
+
+ For 19-inch shelf, there are 3 fans in each fan tray.
+ The fan index should be integer in [1,3].
+
+ For 21-inch shelf, there are 4 fans. The fan index should
+ be integer in [1,4]."
+
+ ::= { zxAnEnvFanEntry 1 }
+
+ zxAnEnvFanConfSpeedLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ lowSpeed (1),
+ standardSpeed(2),
+ highSpeed (3),
+ superSpeed (4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The configured speed level of the fan unit singly."
+ DEFVAL { standardSpeed }
+ ::= { zxAnEnvFanEntry 2 }
+
+ zxAnEnvFanActualSpeedLevel OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ lowSpeed (1),
+ standardSpeed(2),
+ highSpeed (3),
+ superSpeed (4),
+ other (10)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The actual speed level of the fan unit."
+ ::= { zxAnEnvFanEntry 3 }
+
+ zxAnEnvFanAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ up(1),
+ down(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administrative status of the fan unit singly."
+ DEFVAL { up }
+ ::= { zxAnEnvFanEntry 4 }
+
+ zxAnEnvFanOperStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ up(1),
+ down(2),
+ unknown(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The operational status of the fan unit."
+ ::= { zxAnEnvFanEntry 5 }
+
+ zxAnEnvFanOnlineStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ online(1),
+ offline(2),
+ unknown(3)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The actual online status of the fan unit."
+ ::= { zxAnEnvFanEntry 6 }
+
+ zxAnEnvFanActualSpeed OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "The actual speed of the fan unit.
+ NOTE:
+ If not supported, NMS should use the speed value of
+ zxAnEnvFanActualSpeedLevel."
+ ::= { zxAnEnvFanEntry 7 }
+
+-------------------------------------------------------------------------------
+-- 6.3 Fan Tray Reset Objects
+-------------------------------------------------------------------------------
+ zxAnEnvFanTrayResetRack OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The rack number of the fan tray."
+ ::= { zxAnEnvFanTrayResetObjects 1 }
+
+ zxAnEnvFanTrayResetShelfList OBJECT-TYPE
+ SYNTAX DisplayString ( SIZE ( 0 .. 16 ) )
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The shelf number list of the fan tray.
+ They can be reset in batch, for example: 1,2,3.
+ Setting this object to empty means all the fan trays
+ connected with zxAnEnvFanTrayRack will be reset."
+ ::= { zxAnEnvFanTrayResetObjects 2 }
+
+ zxAnEnvFanTrayResetAction OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ reset(1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Reset the fan trays.
+ To query this object, always return 1."
+ ::= { zxAnEnvFanTrayResetObjects 3 }
+
+-------------------------------------------------------------------------------
+-- 8. Environment Device Objects
+-------------------------------------------------------------------------------
+ zxAnEnvDeviceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnEnvDeviceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of environment device."
+ ::= { zxAnEnvDeviceObjects 2 }
+
+ zxAnEnvDeviceEntry OBJECT-TYPE
+ SYNTAX ZxAnEnvDeviceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of the zxAnEnvDeviceTable."
+ INDEX { zxAnEnvDeviceId }
+ ::= { zxAnEnvDeviceTable 1 }
+
+ ZxAnEnvDeviceEntry ::= SEQUENCE {
+ zxAnEnvDeviceId Integer32,
+ zxAnEnvDeviceName DisplayString,
+ zxAnEnvDeviceRowStatus RowStatus
+ }
+
+ zxAnEnvDeviceId OBJECT-TYPE
+ SYNTAX Integer32(1..100)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ID of this environment device.
+ Value 1-50 is default value which can not be modified or deleted.
+ If add a new device, the ID will be starting from 51."
+ ::= { zxAnEnvDeviceEntry 1 }
+
+ zxAnEnvDeviceName OBJECT-TYPE
+ SYNTAX DisplayString(SIZE(1..32))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The name of the environment device."
+ ::= { zxAnEnvDeviceEntry 2 }
+
+ zxAnEnvDeviceRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this conceptual row.
+
+ The supported actions of this conceptual row only include:
+ 'createAndGo' and 'destroy'.
+
+ To create a row in this table, a manager must set this object to
+ createAndGo(4).
+
+ To delete a row in this table, a manager must set this object to
+ destroy(6).
+
+ To get this object, the agent always returns active(1).
+ "
+ ::= { zxAnEnvDeviceEntry 50 }
+
+-------------------------------------------------------------------------------
+-- 9. Environment Device Switch Objects
+-------------------------------------------------------------------------------
+ zxAnEnvDevMonSwitchTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ZxAnEnvDevMonSwitchEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table of the switch which monitors environment device."
+ ::= { zxAnEnvDeviceObjects 3 }
+
+ zxAnEnvDevMonSwitchEntry OBJECT-TYPE
+ SYNTAX ZxAnEnvDevMonSwitchEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The entry of the zxAnEnvDevMonSwitchTable."
+ INDEX { zxAnEnvDevMonSwitchId }
+ ::= { zxAnEnvDevMonSwitchTable 1 }
+
+ ZxAnEnvDevMonSwitchEntry ::= SEQUENCE {
+ zxAnEnvDevMonSwitchId Integer32,
+ zxAnEnvDevMonSwitchDeviceId Integer32,
+ zxAnEnvDevMonSwitchTrapEnable INTEGER,
+ zxAnEnvDevMonSwitchNormalStatus INTEGER,
+ zxAnEnvDevMonSwitchCurrStatus INTEGER
+ }
+
+ zxAnEnvDevMonSwitchId OBJECT-TYPE
+ SYNTAX Integer32(1..8)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ID of the switch."
+ ::= { zxAnEnvDevMonSwitchEntry 1 }
+
+ zxAnEnvDevMonSwitchDeviceId OBJECT-TYPE
+ SYNTAX Integer32(0..100)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The ID of the device which monitored by the switch.
+ Value 0 means this switch does not monitor any device."
+ DEFVAL { 0 }
+ ::= { zxAnEnvDevMonSwitchEntry 2 }
+
+ zxAnEnvDevMonSwitchTrapEnable OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Enables or disables the environment device abnormal trap."
+ DEFVAL { disabled }
+ ::= { zxAnEnvDevMonSwitchEntry 3 }
+
+ zxAnEnvDevMonSwitchNormalStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ lowLevel(1),
+ highLevel(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The normal status of the environment device."
+ DEFVAL { lowLevel }
+ ::= { zxAnEnvDevMonSwitchEntry 4 }
+
+ zxAnEnvDevMonSwitchCurrStatus OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ lowLevel(1),
+ highLevel(2),
+ unknown(255)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current status of the environment device. "
+ ::= { zxAnEnvDevMonSwitchEntry 5 }
+
+-------------------------------------------------------------------------------
+-- 21. zxAnEnvMonNotifications
+-------------------------------------------------------------------------------
+
+---envTempHigh alarm
+
+ zxAnEnvHighTempAlm NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvTemp, zxAnEnvTempHighAlmThreshold }
+ STATUS current
+ DESCRIPTION
+ "The environment temperature has exceeded high temperature
+ threshold zxAnEnvTempHighAlmThreshold.
+ The zxAnEnvTemp object identifies the current temperature."
+ ::= { zxAnEnvMonTempTraps 1 }
+
+ zxAnEnvHighTempClr NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvTemp, zxAnEnvTempHighAlmThreshold }
+ STATUS current
+ DESCRIPTION
+ "The environment temperature has returned to normal operating
+ temperature from zxAnEnvTempHighAlmThreshold.
+ The zxAnEnvTemp object identifies the current temperature."
+ ::= { zxAnEnvMonTempTraps 2 }
+
+ zxAnEnvTempSensorFailure NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "It indicates that the temperature sensor is in fault."
+ ::= { zxAnEnvMonTempTraps 5 }
+
+ zxAnEnvCriticalTempAlm NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvTemp, zxAnEnvTempCriticalAlmThreshold }
+ STATUS current
+ DESCRIPTION
+ "The environment temperature has exceeded critical temperature
+ threshold zxAnEnvTempCriticalAlmThreshold.
+ The zxAnEnvTemp object identifies the current temperature."
+ ::= { zxAnEnvMonTempTraps 6 }
+
+ zxAnEnvCriticalTempClr NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvTemp, zxAnEnvTempCriticalAlmThreshold }
+ STATUS current
+ DESCRIPTION
+ "The environment temperature has returned to normal operating
+ temperature from zxAnEnvTempCriticalAlmThreshold.
+ The zxAnEnvTemp object identifies the current temperature."
+ ::= { zxAnEnvMonTempTraps 7 }
+
+ zxAnEnvLowTempAlm NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvTemp, zxAnEnvTempLowAlmThreshold }
+ STATUS current
+ DESCRIPTION
+ "The environment temperature is below low temperature
+ threshold zxAnEnvTempLowAlmThreshold.
+ The zxAnEnvTemp object identifies the current temperature."
+ ::= { zxAnEnvMonTempTraps 8 }
+
+ zxAnEnvLowTempClr NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvTemp, zxAnEnvTempLowAlmThreshold }
+ STATUS current
+ DESCRIPTION
+ "The environment temperature has returned to normal operating
+ temperature from zxAnEnvTempLowAlmThreshold.
+ The zxAnEnvTemp object identifies the current temperature."
+ ::= { zxAnEnvMonTempTraps 9 }
+
+ zxAnEnvCardShutdownAlm NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvCardShutdownReason,
+ zxAnCardTemp,
+ zxAnEnvTemp,
+ zxAnEnvEmergencyBatteryVoltage,
+ zxAnEnvEmergencyBatteryThreshold }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvCardShutdownAlm trap is sent when the card has
+ been shut down because agent has detected that the temperature
+ is too high or the AC power is failure and the battery voltage
+ is lower than zxAnEnvEmergencyBatteryThreshold.
+
+ zxAnEnvCardShutdownReason indicates the real reason.
+
+ When zxAnEnvCardShutdownReason is envHighTemperature ( 1 ),
+ it means the environment temperature is too high,
+ zxAnEnvTemp is the value of current environment temperature,
+ zxAnCardTemp is invalid and should be zero.
+ zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
+ are invalid and should be zero.
+
+ When zxAnEnvCardShutdownReason is cardHighTemperature ( 2 ),
+ it means the card temperature is too high,
+ zxAnCardTemp is the value of current card temperature,
+ zxAnEnvTemp is invalid and should be zero.
+ zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
+ are invalid and should be zero.
+
+ When zxAnEnvCardShutdownReason is chipHighTemperature ( 3 ),
+ it means the temperature of the chip on the card is too high,
+ zxAnCardTemp and zxAnEnvTemp are invalid and should be zero.
+ zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
+ are invalid and should be zero.
+
+ When zxAnEnvCardShutdownReason is emergencyPowerSaving ( 4 ),
+ it means the AC power is failure, the emergency power saving action
+ has been taken, zxAnCardTemp and zxAnEnvTemp are invalid
+ and should be zero.
+ zxAnEnvEmergencyBatteryVoltage is the value of the current battery
+ voltage, zxAnEnvEmergencyBatteryThreshold is the threshold of the
+ battery voltage.
+ "
+ ::= { zxAnEnvMonTempTraps 30 }
+
+ zxAnEnvCardShutdownClr NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvCardShutdownReason,
+ zxAnCardTemp,
+ zxAnEnvTemp,
+ zxAnEnvEmergencyBatteryVoltage,
+ zxAnEnvEmergencyBatteryThreshold }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvCardShutdownClr trap is sent when the card
+ temperature becomes normal,
+ or the environment temperature becomes normal,
+ or the chip temperature becomes normal,
+ or the battery voltage is higher than
+ zxAnEnvEmergencyBatteryThreshold or AC power becomes normal."
+ ::= { zxAnEnvMonTempTraps 31 }
+
+ zxAnEnvTemperatureAbnormalAlm NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "In temperature control mode, a zxAnEnvTemperatureAbnormalAlm trap
+ is sent when the environment temperature can't be read."
+ ::= { zxAnEnvMonTempTraps 32 }
+
+ zxAnEnvTemperatureAbnormalClr NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvTemperatureAbnormalClr trap is sent when
+ the zxAnEnvTemperatureAbnormalAlm is cleared."
+ ::= { zxAnEnvMonTempTraps 33 }
+
+ zxAnEnvNearCriticalTempAlm NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnEnvTemp,
+ zxAnEnvTempCriticalAlmThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvNearCriticalTempAlm trap is sent when the environment
+ temperature is close to the environment critical temperature alarm
+ threshold."
+ ::= { zxAnEnvMonTempTraps 34 }
+
+ zxAnEnvNearCriticalTempClr NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnEnvTemp,
+ zxAnEnvTempCriticalAlmThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvNearCriticalTempClr trap is sent when
+ the zxAnEnvNearCriticalTempAlm is cleared."
+ ::= { zxAnEnvMonTempTraps 35 }
+
+ zxAnEnvCardNearCriticalTempAlm NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnCardTemp,
+ zxAnCardCriticalTempAlmThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvCardNearCriticalTempAlm trap is sent when the card
+ temperature is close to the card critical temperature alarm
+ threshold."
+ ::= { zxAnEnvMonTempTraps 36 }
+
+ zxAnEnvCardNearCriticalTempClr NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnCardTemp,
+ zxAnCardCriticalTempAlmThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvCardNearCriticalTempClr trap is sent when
+ the zxAnEnvCardNearCriticalTempAlm is cleared."
+ ::= { zxAnEnvMonTempTraps 37 }
+
+ zxAnEnvOptNearCriticalTempAlm NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnCardOptHighestTemp,
+ zxAnCardOptCriticalTempAlmThresh,
+ zxAnCardOptHighestTempPortNo
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvOptNearCriticalTempAlm trap is sent when the optical
+ module temperature is close to the optical module critical
+ temperature alarm threshold."
+ ::= { zxAnEnvMonTempTraps 38 }
+
+ zxAnEnvOptNearCriticalTempClr NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnCardOptHighestTemp,
+ zxAnCardOptCriticalTempAlmThresh,
+ zxAnCardOptHighestTempPortNo
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvOptNearCriticalTempClr trap is sent when
+ the zxAnEnvOptNearCriticalTempAlm is cleared."
+ ::= { zxAnEnvMonTempTraps 39 }
+
+ zxAnEnvHeatRadiationAbnormalAlm NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnEnvTemp,
+ zxAnCardTemp,
+ zxAnCardHeatRadiationAlmThresh
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvHeatRadiationAbnormalAlm trap is sent when the
+ temperature difference between the card and the environment
+ exceeds the zxAnCardHeatRadiationAlmThresh."
+ ::= { zxAnEnvMonTempTraps 40 }
+
+ zxAnEnvHeatRadiationAbnormalClr NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnEnvTemp,
+ zxAnCardTemp,
+ zxAnCardHeatRadiationAlmThresh
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvHeatRadiationAbnormalClr trap is sent when
+ the zxAnEnvHeatRadiationAbnormalAlm is cleared."
+ ::= { zxAnEnvMonTempTraps 41 }
+
+---interface link down alarm
+
+ zxAnEnvMonitorInterfaceLinkDown NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "It indicates that the agent has detected that the
+ link at the environment monitoring interface has been down."
+ ::= { zxAnEnvMonInterfaceTraps 1 }
+
+ zxAnEnvMonitorInterfaceLinkUp NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "It indicates that the agent has detected that the
+ link at the environment monitoring interface has been up."
+ ::= { zxAnEnvMonInterfaceTraps 2 }
+
+--- Power Supply Alarm
+
+ zxAnEnvPowerSupplyModuleDown NOTIFICATION-TYPE
+ OBJECTS { zxAnPowerSupplyOperStatus }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the power supply module is down."
+ ::= { zxAnEnvMonPowerSupplyTraps 1 }
+
+ zxAnEnvPowerSupplyModuleUp NOTIFICATION-TYPE
+ OBJECTS { zxAnPowerSupplyOperStatus }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the power supply module is up."
+ ::= { zxAnEnvMonPowerSupplyTraps 2 }
+
+ zxAnEnvPowerOverVoltageAlm NOTIFICATION-TYPE
+ OBJECTS { zxAnPowerSupplyInVoltage, zxAnPowerInVoltageUpperThresh }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the input voltage of power supply is
+ over-voltage."
+ ::= { zxAnEnvMonPowerSupplyTraps 3 }
+
+
+ zxAnEnvPowerOverVoltageClr NOTIFICATION-TYPE
+ OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageUpperThresh }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the over-voltage fault is cleared."
+ ::= { zxAnEnvMonPowerSupplyTraps 4 }
+
+
+ zxAnEnvPowerUnderVoltageAlm NOTIFICATION-TYPE
+ OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageLowerThresh }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the input voltage of power supply is
+ under-voltage."
+ ::= { zxAnEnvMonPowerSupplyTraps 5 }
+
+
+ zxAnEnvPowerUnderVoltageClr NOTIFICATION-TYPE
+ OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageLowerThresh }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the under-voltage fault is cleared."
+ ::= { zxAnEnvMonPowerSupplyTraps 6 }
+
+ zxAnEnvPowerOff NOTIFICATION-TYPE
+ OBJECTS { zxAnPowerSupplyInVoltageStatus }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the power supply is off."
+ ::= { zxAnEnvMonPowerSupplyTraps 7 }
+
+ zxAnEnvPowerOn NOTIFICATION-TYPE
+ OBJECTS { zxAnPowerSupplyInVoltageStatus }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the power supply off fault is cleared."
+ ::= { zxAnEnvMonPowerSupplyTraps 8 }
+
+ zxAnEnvEmergencyPowerSaveAlm NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "The current power supply switches to storage battery,
+ the emergency power saving action has been taken."
+ ::= { zxAnEnvMonPowerSupplyTraps 9 }
+
+ zxAnEnvEmergencyPowerSaveClr NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "The current power supply switches to normal AC power."
+ ::= { zxAnEnvMonPowerSupplyTraps 10 }
+
+ zxAnEnvACPowerDownAlm NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvACPowerDownAlm trap is sent when the agent detects no AC
+ power input."
+ ::= { zxAnEnvMonPowerSupplyTraps 11 }
+
+ zxAnEnvACPowerDownClr NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvACPowerDownClr trap is sent when the agent detects AC
+ power input."
+ ::= { zxAnEnvMonPowerSupplyTraps 12 }
+
+ zxAnEnvNoBatteryAlm NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvNoBatteryAlm trap is sent when no battery found by
+ the agent."
+ ::= { zxAnEnvMonPowerSupplyTraps 13 }
+
+ zxAnEnvNoBatteryClr NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvNoBatteryClr trap is sent when the battery has been found
+ by the agent."
+ ::= { zxAnEnvMonPowerSupplyTraps 14 }
+
+ zxAnEnvBatteryUnderVoltageAlm NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvBatteryUnderVoltageAlm trap is sent when the battery
+ voltage is under-voltage."
+ ::= { zxAnEnvMonPowerSupplyTraps 15 }
+
+ zxAnEnvBatteryUnderVoltageClr NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvBatteryUnderVoltageClr trap is sent when the battery
+ voltage becomes normal."
+ ::= { zxAnEnvMonPowerSupplyTraps 16 }
+
+
+--- Fan Alarm
+
+ zxAnEnvFanLinkDown NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvFanOnlineStatus }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the agent has detected that fan is offline."
+ ::= { zxAnEnvMonFanTraps 1 }
+
+ zxAnEnvFanLinkUp NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvFanOnlineStatus }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the agent has detected that fan is online."
+ ::= { zxAnEnvMonFanTraps 2 }
+
+
+ zxAnEnvFanTrayLinkDown NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "It indicates that the agent has detected that the
+ link at the fan card interface has been down."
+ ::= { zxAnEnvMonFanTraps 3 }
+
+
+ zxAnEnvFanTrayLinkUp NOTIFICATION-TYPE
+ STATUS current
+ DESCRIPTION
+ "It indicates that the agent has detected that the
+ link at the fan card interface has been up."
+ ::= { zxAnEnvMonFanTraps 4 }
+
+ zxAnEnvFanFailureAlm NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvFanOperStatus }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the fan is in fault."
+ ::= { zxAnEnvMonFanTraps 5 }
+
+ zxAnEnvFanFailureClr NOTIFICATION-TYPE
+ OBJECTS { zxAnEnvFanOperStatus }
+ STATUS current
+ DESCRIPTION
+ "It indicates that the fan's fault is cleared."
+ ::= { zxAnEnvMonFanTraps 6 }
+
+ zxAnEnvDeviceAbnormalAlm NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnEnvDevMonSwitchDeviceId,
+ zxAnEnvDevMonSwitchNormalStatus,
+ zxAnEnvDevMonSwitchCurrStatus,
+ zxAnEnvDeviceName
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvDeviceAbnormalAlm trap is sent when the current status
+ of environment device is inconsistent with normal status."
+ ::= { zxAnEnvDeviceTraps 1 }
+
+ zxAnEnvDeviceAbnormalClr NOTIFICATION-TYPE
+ OBJECTS {
+ zxAnEnvDevMonSwitchDeviceId,
+ zxAnEnvDevMonSwitchNormalStatus,
+ zxAnEnvDevMonSwitchCurrStatus,
+ zxAnEnvDeviceName
+ }
+ STATUS current
+ DESCRIPTION
+ "A zxAnEnvDeviceAbnormalClr trap is sent when current status
+ of environment device is consistent with normal status."
+ ::= { zxAnEnvDeviceTraps 2 }
+-------------------------------------------------------------------------------
+-- 31. zxAnEnvMonConformance
+-------------------------------------------------------------------------------
+ zxAnEnvMonConformance OBJECT IDENTIFIER ::= { zxAnEnvMonMib 4 }
+
+ zxAnEnvMonCompliances OBJECT IDENTIFIER ::= { zxAnEnvMonConformance 1 }
+ zxAnEnvMonGroups OBJECT IDENTIFIER ::= { zxAnEnvMonConformance 2 }
+
+ zxAnEnvMonCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities which implement the
+ ZTE-AN-ENVMON-MIB."
+ MODULE -- this module
+
+ MANDATORY-GROUPS {
+ zxAnEnvMonCapabilitiesGroup,
+ zxAnEnvTempGroup,
+ zxAnEnvCardTempGroup,
+ zxAnEnvInterfaceGroup,
+ zxAnEnvPowerSupplyGroup,
+ zxAnEnvFanTrayTableGroup,
+ zxAnEnvFanTableGroup,
+ zxAnEnvMonNotificationsGroup
+ }
+ ::= { zxAnEnvMonCompliances 1 }
+
+ zxAnEnvMonCapabilitiesGroup OBJECT-GROUP
+ OBJECTS { zxAnEnvMonCapabilities
+ }
+ STATUS current
+ DESCRIPTION
+ "The collection of objects which are used to represent environment
+ management capabilities of this equipment. The bit value 1 means
+ the function represented by this bit is supported by this
+ equipment."
+ ::= { zxAnEnvMonGroups 1 }
+
+ zxAnEnvTempGroup OBJECT-GROUP
+ OBJECTS { zxAnEnvTemp,
+ zxAnEnvTempHighAlmThreshold,
+ zxAnEnvTempCriticalAlmThreshold,
+ zxAnEnvTempLowAlmThreshold
+ }
+ STATUS current
+ DESCRIPTION
+ "The collection of objects which are used to represent the
+ temperature information of this equipment/card and to set the
+ temperature alarm threshold of the environment/card."
+ ::= { zxAnEnvMonGroups 2 }
+
+ zxAnEnvCardTempGroup OBJECT-GROUP
+ OBJECTS { zxAnCardTemp,
+ zxAnCardEnvHis15MinTemp,
+ zxAnCardEnvHis1DayTemp,
+ zxAnCardEnvRiseAlmThresh,
+ zxAnCardEnvClrRiseAlmThresh,
+ zxAnCardEnvRiseWarnThresh,
+ zxAnCardEnvClrRiseWarnThresh,
+ zxAnCardEnvFallWarnThresh,
+ zxAnCardEnvClrFallWarnThresh,
+ zxAnCardEnvFallAlmThresh,
+ zxAnCardEnvClrFallAlmThresh,
+ zxAnCardEnvAlmPrfConfRowStatus,
+ zxAnCardEnvAlmPrf,
+ zxAnCardEnvAlmPrfApplyRowStatus,
+ zxAnCardEnvAlmPrfRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The collection of objects which are used to represent temperature
+ performance of the card environment."
+ ::= { zxAnEnvMonGroups 3 }
+
+ zxAnEnvInterfaceGroup OBJECT-GROUP
+ OBJECTS { zxAnEnvMonInterfaceUsage,
+ zxAnEnvEpmConnectPort,
+ zxAnEnvBackplaneInterfaceUsage
+ }
+ STATUS current
+ DESCRIPTION
+ "The collection of objects which are used to represent the
+ interface connection of the equipment."
+ ::= { zxAnEnvMonGroups 4 }
+
+ zxAnEnvPowerSupplyGroup OBJECT-GROUP
+ OBJECTS { zxAnPowerSupplyMaxPowerNum,
+ zxAnPowerSupplyOperStatus,
+ zxAnPowerSupplyInVoltage,
+ zxAnPowerSupplyInVoltageStatus,
+ zxAnPowerInVoltageUpperThresh,
+ zxAnPowerInVoltageLowerThresh,
+ zxAnPowerSupplyInCurrent,
+ zxAnPowerInCurrentThresh
+ }
+ STATUS current
+ DESCRIPTION
+ "The collection of objects which are used to provide power
+ management functions, include power count and the voltage status
+ of the power supply."
+ ::= { zxAnEnvMonGroups 5 }
+
+ zxAnEnvFanTrayTableGroup OBJECT-GROUP
+ OBJECTS { zxAnFanTrayAlarmBeepEnable,
+ zxAnFanTrayAutoSwitchByCardUp,
+ zxAnFanTrayHardwareVersion,
+ zxAnFanTraySoftwareVersion,
+ zxAnFanTraySpeedCtrlMode,
+ zxAnFanTrayLowSpeed,
+ zxAnFanTrayStdSpeed,
+ zxAnFanTrayHighSpeed,
+ zxAnFanTraySuperSpeed,
+ zxAnFanTrayLowSpeedShiftTemp,
+ zxAnFanTrayStdSpeedShiftTemp,
+ zxAnFanTrayHighSpeedShiftTemp,
+ zxAnFanTraySuperSpeedShiftTemp,
+ zxAnFanTrayLowSpeedPercent,
+ zxAnFanTrayStdSpeedPercent,
+ zxAnFanTrayHighSpeedPercent,
+ zxAnFanTraySuperSpeedPercent,
+ zxAnFanTraySn
+ }
+ STATUS current
+ DESCRIPTION
+ "The collection of objects which are used to provide fan management
+ functions, include setting the speed control mode and the
+ percentage of speed of the different speed level of the fan."
+ ::= { zxAnEnvMonGroups 6 }
+
+ zxAnEnvFanTableGroup OBJECT-GROUP
+ OBJECTS { zxAnEnvFanConfSpeedLevel,
+ zxAnEnvFanActualSpeedLevel,
+ zxAnEnvFanAdminStatus,
+ zxAnEnvFanOperStatus,
+ zxAnEnvFanOnlineStatus,
+ zxAnEnvFanActualSpeed
+ }
+ STATUS current
+ DESCRIPTION
+ "The collection of objects which are used to provide the speed
+ information and operational status of the fan."
+ ::= { zxAnEnvMonGroups 7 }
+
+ zxAnEnvMonNotificationsGroup OBJECT-GROUP
+ OBJECTS { zxAnEnvHighTempAlm,
+ zxAnEnvHighTempClr,
+ zxAnEnvMonitorInterfaceLinkDown,
+ zxAnEnvMonitorInterfaceLinkUp,
+ zxAnEnvFanLinkDown,
+ zxAnEnvFanLinkUp,
+ zxAnEnvTempSensorFailure,
+ zxAnEnvFanFailureAlm,
+ zxAnEnvFanFailureClr,
+ zxAnEnvPowerSupplyModuleDown,
+ zxAnEnvPowerSupplyModuleUp,
+ zxAnEnvFanTrayLinkDown,
+ zxAnEnvFanTrayLinkUp,
+ zxAnEnvPowerOverVoltageAlm,
+ zxAnEnvPowerOverVoltageClr,
+ zxAnEnvPowerUnderVoltageAlm,
+ zxAnEnvPowerUnderVoltageClr,
+ zxAnEnvPowerOff,
+ zxAnEnvPowerOn,
+ zxAnEnvACPowerDownAlm,
+ zxAnEnvACPowerDownClr,
+ zxAnEnvNoBatteryAlm,
+ zxAnEnvNoBatteryClr,
+ zxAnEnvBatteryUnderVoltageAlm,
+ zxAnEnvBatteryUnderVoltageClr,
+ zxAnEnvCardShutdownAlm,
+ zxAnEnvCardShutdownClr,
+ zxAnEnvCriticalTempAlm,
+ zxAnEnvCriticalTempClr,
+ zxAnEnvLowTempAlm,
+ zxAnEnvLowTempClr,
+ zxAnEnvOptNearCriticalTempAlm,
+ zxAnEnvOptNearCriticalTempClr,
+ zxAnEnvHeatRadiationAbnormalAlm,
+ zxAnEnvHeatRadiationAbnormalClr
+ }
+ STATUS current
+ DESCRIPTION
+ "The notifications which indicate specific changes, include
+ temperature, fan status, power status and gpon card status."
+ ::= { zxAnEnvMonGroups 8 }
+
+END
|