diff options
Diffstat (limited to 'MIBS/ATM-FORUM-TC-MIB')
| -rw-r--r-- | MIBS/ATM-FORUM-TC-MIB | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/MIBS/ATM-FORUM-TC-MIB b/MIBS/ATM-FORUM-TC-MIB new file mode 100644 index 0000000..4dd262d --- /dev/null +++ b/MIBS/ATM-FORUM-TC-MIB @@ -0,0 +1,188 @@ +-- -------------------------------------------------------------------- +-- ATM FORUM TC MIB +-- +-- October 1996, Kartik Chandrasekhar +-- +-- Copyright (c) 1996-1997 by cisco Systems, Inc. +-- All rights reserved. +-- ***************************************************************** + +ATM-FORUM-TC-MIB DEFINITIONS ::= BEGIN + +IMPORTS + TEXTUAL-CONVENTION FROM SNMPv2-TC + enterprises FROM RFC1155-SMI; + + +-- Textual Conventions + +-- Boolean values use this data type from RFC-1903, "Textual Conventions +-- for Version 2 of the Simple Network Management Protocol (SNMPv2)" +TruthValue ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Boolean values use this data type from RFC-1903" + SYNTAX INTEGER { + true(1), + false(2) + } + +-- CLNP address values use this data type from RFC-1238, "CLNS MIB for +-- use with Connectionless Network Protocol (ISO 8473) and End System +-- to Intermediate System (ISO 9542)" +ClnpAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "CLNP address values use this data type from RFC-1238" + SYNTAX OCTET STRING (SIZE (1..21)) + + +-- ATM Service Categories use this data type (See [TM4.0]): +AtmServiceCategory ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "ATM Service Categories use this data type" + SYNTAX INTEGER { + other(1), + cbr(2), + rtVbr(3), + nrtVbr(4), + abr(5), + ubr(6) + } + +-- ATM End-System Addresses use this data type: +AtmAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "ATM End-System Addresses" + SYNTAX OCTET STRING (SIZE (8 | 20)) + +-- Network-Prefixes for an ATM Address use this data type: +NetPrefix ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "ATM End-System Addresses" + SYNTAX OCTET STRING (SIZE (8 | 13)) + + +-- In both the AtmAddress and NetPrefix conventions, Native E.164 addresses +-- are represented as 8 octets using the format specified in section +-- 3.1.1.3 of the ATM Forum UNI Signalling 4.0 specification. +-- In contrast, an NSAP-encoded address is 20 octets, and an NSAP-encoded +-- network prefix is 13 octets long. + + +-- MIB Groups + +-- a subtree for defining ATM Forum MIB object types +atmForum OBJECT IDENTIFIER ::= { enterprises 353 } + +-- a subtree for defining administrative object types +atmForumAdmin OBJECT IDENTIFIER ::= { atmForum 1 } +atmfTransmissionTypes OBJECT IDENTIFIER ::= { atmForumAdmin 2 } +atmfMediaTypes OBJECT IDENTIFIER ::= { atmForumAdmin 3 } +atmfTrafficDescrTypes OBJECT IDENTIFIER ::= { atmForumAdmin 4 } +atmfSrvcRegTypes OBJECT IDENTIFIER ::= { atmForumAdmin 5 } + +-- a subtree for defining ATM Interface MIB object types +atmForumUni OBJECT IDENTIFIER ::= { atmForum 2 } +atmfPhysicalGroup OBJECT IDENTIFIER ::= { atmForumUni 1 } +atmfAtmLayerGroup OBJECT IDENTIFIER ::= { atmForumUni 2 } +atmfAtmStatsGroup OBJECT IDENTIFIER ::= { atmForumUni 3 } +atmfVpcGroup OBJECT IDENTIFIER ::= { atmForumUni 4 } +atmfVccGroup OBJECT IDENTIFIER ::= { atmForumUni 5 } +atmfAddressGroup OBJECT IDENTIFIER ::= { atmForumUni 6 } +atmfNetPrefixGroup OBJECT IDENTIFIER ::= { atmForumUni 7 } +atmfSrvcRegistryGroup OBJECT IDENTIFIER ::= { atmForumUni 8 } +atmfVpcAbrGroup OBJECT IDENTIFIER ::= { atmForumUni 9 } +atmfVccAbrGroup OBJECT IDENTIFIER ::= { atmForumUni 10 } +atmfAddressRegistrationAdminGroup OBJECT IDENTIFIER ::= { atmForumUni 11 } + + +-- Object Identifier definitions + +-- Transmission Types: These values are no longer used +atmfUnknownType OBJECT IDENTIFIER ::= { atmfTransmissionTypes 1} +atmfSonetSTS3c OBJECT IDENTIFIER ::= { atmfTransmissionTypes 2 } +atmfDs3 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 3 } +atmf4B5B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 4 } +atmf8B10B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 5 } +atmfSonetSTS12c OBJECT IDENTIFIER ::= { atmfTransmissionTypes 6 } +atmfE3 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 7 } +atmfT1 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 8 } +atmfE1 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 9 } + +-- Media Types: These values are no longer used +atmfMediaUnknownType OBJECT IDENTIFIER ::= { atmfMediaTypes 1 } +atmfMediaCoaxCable OBJECT IDENTIFIER ::= { atmfMediaTypes 2 } +atmfMediaSingleMode OBJECT IDENTIFIER ::= { atmfMediaTypes 3 } +atmfMediaMultiMode OBJECT IDENTIFIER ::= { atmfMediaTypes 4 } +atmfMediaStp OBJECT IDENTIFIER ::= { atmfMediaTypes 5 } +atmfMediaUtp OBJECT IDENTIFIER ::= { atmfMediaTypes 6 } + +-- Traffic Descriptor Types: These types are combined with a five element +-- parameter vector to describe a Traffic Descriptor. +-- Traffic Descriptors along with a Best Effort Indicator are used to +-- indicate a Conformance Definition as defined in [TM4.0]. + +-- These types are no longer used +atmfNoDescriptor OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 1 } +atmfPeakRate OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 2 } + +-- The No CLP/No SCR Type +-- Indicates the CBR.1 Conformance Definition if Best Effort is No +-- Indicates the UBR.1 and UBR.2 Conformance Definitions if Best Effort is Yes +atmfNoClpNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 3 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic + -- Parameter #2 - CDVT in tenths of microseconds + -- Parameters #3, #4 and #5 are unused + +-- These types are no longer used +atmfClpNoTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 4 } +atmfClpTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 5 } + +-- The SCR/No CLP Type +-- Indicates the VBR.1 Conformance Definition +atmfNoClpScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 6 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic + -- Parameter #2 - sustainable cell rate in cells/second for CLP=0+1 traffic + -- Parameter #3 - maximum burst size in cells + -- Parameter #4 - CDVT in tenths of microseconds + -- Parameter #5 - unused + +-- The CLP without Tagging/SCR Type +-- Indicates the VBR.2 Conformance Definition +atmfClpNoTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 7 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic + -- Parameter #2 - sustainable cell rate in cells/second for CLP=0 traffic + -- Parameter #3 - maximum burst size in cells + -- Parameter #4 - CDVT in tenths of microseconds + -- Parameter #5 - unused + +-- The CLP with Tagging/SCR Type +-- Indicates the VBR.3 Conformance Definition +atmfClpTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 8 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic + -- Parameter #2 - sustainable cell rate in cells/second for CLP=0 + -- traffic, excess tagged as CLP=1 + -- Parameter #3 - maximum burst size in cells + -- Parameter #4 - CDVT in tenths of microseconds + -- Parameter #5 - unused + +-- The ABR Type +-- Indicates the ABR Conformance Definition +atmfClpNoTaggingMcr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 9 } +-- The use of the parameter vector for this type: + -- Parameter #1 - peak cell rate in cells/second + -- parameter #2 - CDVT in tenths of microseconds + -- Parameter #3 - minimum cell rate in cells/second + -- Parameter #4 - unused + -- Parameter #5 - unused + +END + |