diff options
Diffstat (limited to 'MIBS/SMON-MIB')
| -rw-r--r-- | MIBS/SMON-MIB | 1276 |
1 files changed, 1276 insertions, 0 deletions
diff --git a/MIBS/SMON-MIB b/MIBS/SMON-MIB new file mode 100644 index 0000000..5677f8f --- /dev/null +++ b/MIBS/SMON-MIB @@ -0,0 +1,1276 @@ +-- ***************************************************************** +-- SMON-MIB.my +-- Remote Monitoring Extensions for Ethernet Switches +-- from draft-ietf-rmonmib-smon-07.txt +-- +-- April 1999, Andy Bierman +-- +-- Copyright (c) 1998 - 1999 by cisco Systems, Inc. +-- All rights reserved. +-- ***************************************************************** +-- + + SMON-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter32, + Integer32, Counter64 + FROM SNMPv2-SMI + RowStatus, TEXTUAL-CONVENTION + FROM SNMPv2-TC + rmon, OwnerString + FROM RMON-MIB + LastCreateTime, DataSource, rmonConformance, probeConfig + FROM RMON2-MIB + InterfaceIndex + FROM IF-MIB + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF; + + switchRMON MODULE-IDENTITY + LAST-UPDATED "9812160000Z" + ORGANIZATION "IETF RMON MIB Working Group" + CONTACT-INFO + "IETF RMONMIB WG Mailing list: rmonmib@cisco.com + + Rich Waterman + Allot Networks Inc. + Tel: +1-408-559-0253 + Email: rich@allot.com + + Bill Lahaye + Xylan Corp. + Tel: +1-800-995-2612 + Email: lahaye@ctron.com + + Dan Romascanu + Lucent Technologies + Tel: +972-3-645-8414 + Email: dromasca@lucent.com + + Steven Waldbusser + International Network Services + Tel: +1-415-254-4251 + Email: waldbusser@ins.com" + + DESCRIPTION + "The MIB module for managing remote monitoring device + implementations for Switched Networks" + ::= { rmon 22 } + + smonMIBObjects OBJECT IDENTIFIER ::= { switchRMON 1 } + + dataSourceCaps OBJECT IDENTIFIER ::= {smonMIBObjects 1} + smonStats OBJECT IDENTIFIER ::= {smonMIBObjects 2} + portCopyConfig OBJECT IDENTIFIER ::= {smonMIBObjects 3} + smonRegistrationPoints OBJECT IDENTIFIER ::= {smonMIBObjects 4} + + -- Textual Conventions + -- + + SmonDataSource ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Identifies the source of the data that the associated function + is configured to analyze. This Textual Convention + extends the DataSource Textual Convention defined by RMON 2 + to the following data source types: + + - ifIndex.<I> + DataSources of this traditional form are called 'port-based', + but only if ifType.<I> is not equal to 'propVirtual(53)'. + + - smonVlanDataSource.<V> + A dataSource of this form refers to a 'Packet-based VLAN' + and is called a 'VLAN-based' dataSource. <V> is the VLAN + ID as defined by the IEEE 802.1Q standard [19]. The + value is between 1 and 4094 inclusive, and it represents + an 802.1Q VLAN-ID with global scope within a given + bridged domain, as defined by [19]. + + - entPhysicalEntry.<N> + A dataSource of this form refers to a physical entity within + the agent (e.g. entPhysicalClass = backplane(4)) and is called + an 'entity-based' dataSource." + SYNTAX OBJECT IDENTIFIER + + -- The smonCapabilities object describes SMON agent capabilities. + + smonCapabilities OBJECT-TYPE + SYNTAX BITS { + smonVlanStats(0), + smonPrioStats(1), + dataSource(2), + smonUnusedBit(3), + portCopy(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of the SMON MIB groups supported + by this agent." + ::= { probeConfig 15 } + + -- dataSourceCaps MIB group - defines SMON data source and port + -- copy capabilities for devices supporting SMON. + + -- A NMS application will check this MIB group and retrieve + -- information about the SMON capabilities of the device before + -- applying SMON control operations to the device. + + + -- dataSourceCapsTable: defines capabilities of RMON data sources + + dataSourceCapsTable OBJECT-TYPE + SYNTAX SEQUENCE OF DataSourceCapsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table describes RMON data sources and port copy + capabilities. An NMS MAY use this table to discover the + identity and attributes of the data sources on a given agent + implementation. Similar to the probeCapabilities object, + actual row-creation operations will succeed or fail based on + the resources available and parameter values used in each + row-creation operation. + + Upon restart of the RMON agent, the dataSourceTable, ifTable, + and perhaps entPhysicalTable are initialized for the available + dataSources. + + For each dataSourceCapsEntry representing a VLAN or + entPhysicalEntry the agent MUST create an associated ifEntry + with a ifType value of 'propVirtual(53)'. This ifEntry will be + used as the actual value in RMON control table dataSource + objects. The assigned ifIndex value is copied into the + associated dataSourceCapsIfIndex object. + It is understood that dataSources representing VLANs may not + always be instantiated immediately upon restart, but rather as + VLAN usage is detected by the agent. The agent SHOULD attempt + to create dataSource and interface entries for all dataSources + as soon as possible." + ::= { dataSourceCaps 1 } + + dataSourceCapsEntry OBJECT-TYPE + SYNTAX DataSourceCapsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entries per data source containing descriptions of data + source and port copy capabilities. This table is populated by + the SMON agent with one entry for each supported data + source." + INDEX { IMPLIED dataSourceCapsObject } + ::= { dataSourceCapsTable 1 } + + DataSourceCapsEntry ::= SEQUENCE { + dataSourceCapsObject + SmonDataSource, + dataSourceRmonCaps + BITS, + dataSourceCopyCaps + BITS, + dataSourceCapsIfIndex + InterfaceIndex + } + + dataSourceCapsObject OBJECT-TYPE + SYNTAX SmonDataSource + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines an object that can be a SMON data source or a + source or a destination for a port copy operation." + ::= { dataSourceCapsEntry 1 } + + dataSourceRmonCaps OBJECT-TYPE + SYNTAX BITS { + countErrFrames(0), + countAllGoodFrames(1), + countAnyRmonTables(2), + babyGiantsCountAsGood(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " General attributes of the specified dataSource. Note that + these are static attributes, which SHOULD NOT be adjusted + because of current resources or configuration. + + - countErrFrames(0) + The agent sets this bit for the dataSource if errored frames + received on this dataSource can actually be monitored by the + agent The agent clears this bit if any errored frames are + not visible to the RMON data collector. + + - countAllGoodFrames(1) + The agent sets this bit for the dataSource if all good + frames received on this dataSource can actually be monitored + by the agent. The agent clears this bit if any good frames + are not visible for RMON collection, e.g., the dataSource is + a non-promiscuous interface or an internal switch interface + which may not receive frames which were switched in hardware + or dropped by the bridge forwarding function. + + - countAnyRmonTables(2) + The agent sets this bit if this dataSource can actually be + used in any of the implemented RMON tables, resources + notwithstanding. The agent clears this bit if this + dataSourceCapsEntry is present simply to identify a + dataSource that may only be used as portCopySource and/or a + portCopyDest, but not the source of an actual RMON data + collection. + + - babyGiantsCountAsGood(3) + The agent sets this bit if it can distinguish, for counting + purposes, between true giant frames and frames that exceed + Ethernet maximum frame size 1518 due to VLAN tagging ('baby + giants'). Specifically, this BIT means that frames up to + 1522 octets are counted as good. + + Agents not capable of detecting 'baby giants' will clear + this bit and will view all frames less than or equal to 1518 + octets as 'good frames' and all frames larger than 1518 + octets as 'bad frames' for the purpose of counting in the + smonVlanIdStats and smonPrioStats tables. + + Agents capable of detecting 'baby giants' SHALL consider + them as 'good frames' for the purpose of counting in the + smonVlanIdStats and smonPrioStats tables." + + ::= { dataSourceCapsEntry 2 } + dataSourceCopyCaps OBJECT-TYPE + SYNTAX BITS { + copySourcePort(0), + copyDestPort(1), + copySrcTxTraffic(2), + copySrcRxTraffic(3), + countDestDropEvents(4), + copyErrFrames(5), + copyUnalteredFrames(6), + copyAllGoodFrames(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PortCopy function capabilities of the specified dataSource. + Note that these are static capabilities, which SHOULD NOT be + adjusted because of current resources or configuration. + + - copySourcePort(0) + The agent sets this bit if this dataSource is capable of + acting as a source of a portCopy operation. The agent clears + this bit otherwise. + + - copyDestPort(1) + The agent sets this bit if this dataSource is capable of + acting as a destination of a portCopy operation. The agent + clears this bit otherwise. + + - copySrcTxTraffic(2) + If the copySourcePort bit is set: + The agent sets this bit if this dataSource is capable of + copying frames transmitted out this portCopy source. The + agent clears this bit otherwise. This function is needed + to support full-duplex ports. + Else: + this bit SHOULD be cleared. + + - copySrcRxTraffic(3) + If the copySourcePort bit is set: + The agent sets this bit if this dataSource is capable of + copying frames received on this portCopy source. The agent + clears this bit otherwise. This function is needed to + support full-duplex ports. + Else: + this bit SHOULD be cleared. + + - countDestDropEvents(4) + If the copyDestPort bit is set: + The agent sets this bit if it is capable of incrementing + portCopyDestDropEvents, when this dataSource is the + target of a portCopy operation and a frame destined to + this dataSource is dropped (for RMON counting purposes). + Else: + this BIT SHOULD be cleared. + + - copyErrFrames(5) + If the copySourcePort bit is set: + The agent sets this bit if it is capable of copying all + errored frames from this portCopy source-port, for + errored frames received on this dataSource. + Else: + this BIT SHOULD be cleared. + + - copyUnalteredFrames(6) + If the copySourcePort bit is set: + The agent sets the copyUnalteredFrames bit If it is + capable of copying all frames from this portCopy + source-port without alteration in any way; + Else: + this bit SHOULD be cleared. + + - copyAllGoodFrames(7) + If the copySourcePort bit is set: + The agent sets this bit for the dataSource if all good + frames received on this dataSource are normally capable + of being copied by the agent. The agent clears this bit + if any good frames are not visible for the RMON portCopy + operation, e.g., the dataSource is a non-promiscuous + interface or an internal switch interface which may not + receive frames which were switched in hardware or + dropped by the bridge forwarding function. + Else: + this bit SHOULD be cleared." + + ::= { dataSourceCapsEntry 3 } + + dataSourceCapsIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the ifIndex value of the ifEntry + associated with this smonDataSource. The agent MUST create + 'propVirtual' ifEntries for each dataSourceCapsEntry of type + VLAN or entPhysicalEntry." + ::= { dataSourceCapsEntry 4 } + + -- The SMON Statistics MIB Group + + -- aggregated statistics for IEEE 802.1Q VLAN environments. + + -- VLAN statistics can be gathered by configuring smonVlanIdStats + -- and/or smonPrioStats collections. These functions allow a + -- VLAN-ID or user priority distributions per dataSource, + -- auto-populated by the agent in a manner similar to the RMON + -- hostTable. + + -- Only good frames are counted in the tables described in this + -- section. + + -- VLAN ID Stats + + -- smonVlanStatsControlTable allows configuration of VLAN-ID + -- collections. + + smonVlanStatsControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmonVlanStatsControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + + "Controls the setup of VLAN statistics tables. + + The statistics collected represent a distribution based on + the IEEE 802.1Q VLAN-ID (VID), for each good frame attributed + to the data source for the collection." + ::= { smonStats 1 } + + smonVlanStatsControlEntry OBJECT-TYPE + SYNTAX SmonVlanStatsControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the smonVlanStatsControlTable." + INDEX { smonVlanStatsControlIndex } + ::= { smonVlanStatsControlTable 1 } + + SmonVlanStatsControlEntry ::= SEQUENCE { + smonVlanStatsControlIndex Integer32, + smonVlanStatsControlDataSource DataSource, + smonVlanStatsControlCreateTime LastCreateTime, + smonVlanStatsControlOwner OwnerString, + smonVlanStatsControlStatus RowStatus + } + + smonVlanStatsControlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique arbitrary index for this smonVlanStatsControlEntry." + ::= { smonVlanStatsControlEntry 1 } + + smonVlanStatsControlDataSource OBJECT-TYPE + SYNTAX DataSource + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source of data for this set of VLAN statistics. + + This object MAY NOT be modified if the associated + smonVlanStatsControlStatus object is equal to active(1)." + ::= { smonVlanStatsControlEntry 2 } + + smonVlanStatsControlCreateTime OBJECT-TYPE + SYNTAX LastCreateTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this control entry was last + activated. This object allows to a management station to + detect deletion and recreation cycles between polls." + ::= { smonVlanStatsControlEntry 3 } + + smonVlanStatsControlOwner OBJECT-TYPE + + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Administratively assigned named of the owner of this entry. + It usually defines the entity that created this entry and is + therefore using the resources assigned to it, though there is + no enforcement mechanism, nor assurance that rows created are + ever used." + ::= { smonVlanStatsControlEntry 4 } + + smonVlanStatsControlStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this row. + + An entry MAY NOT exist in the active state unless all + objects in the entry have an appropriate value. + + If this object is not equal to active(1), all associated + entries in the smonVlanIdStatsTable SHALL be deleted." + ::= { smonVlanStatsControlEntry 5 } + + -- The VLAN Statistics Table + + smonVlanIdStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmonVlanIdStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains the VLAN statistics data. + The statistics collected represent a distribution based + on the IEEE 802.1Q VLAN-ID (VID), for each good frame + attributed to the data source for the collection. + + This function applies the same rules for attributing frames + to VLAN-based collections. RMON VLAN statistics are collected + after the Ingress Rules defined in section 3.13 of the VLAN + Specification [20] are applied. + + It is possible that entries in this table will be + garbage-collected, based on agent resources, and VLAN + configuration. Agents are encouraged to support all 4094 + index values and not garbage collect this table." + ::= { smonStats 2 } + + smonVlanIdStatsEntry OBJECT-TYPE + SYNTAX SmonVlanIdStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in smonVlanIdStatsTable." + INDEX { smonVlanStatsControlIndex, smonVlanIdStatsId } + ::= { smonVlanIdStatsTable 1 } + + SmonVlanIdStatsEntry ::= SEQUENCE { + smonVlanIdStatsId Integer32, + smonVlanIdStatsTotalPkts Counter32, + smonVlanIdStatsTotalOverflowPkts Counter32, + smonVlanIdStatsTotalHCPkts Counter64, + smonVlanIdStatsTotalOctets Counter32, + smonVlanIdStatsTotalOverflowOctets Counter32, + smonVlanIdStatsTotalHCOctets Counter64, + smonVlanIdStatsNUcastPkts Counter32, + smonVlanIdStatsNUcastOverflowPkts Counter32, + smonVlanIdStatsNUcastHCPkts Counter64, + smonVlanIdStatsNUcastOctets Counter32, + smonVlanIdStatsNUcastOverflowOctets Counter32, + smonVlanIdStatsNUcastHCOctets Counter64, + smonVlanIdStatsCreateTime LastCreateTime + } + + smonVlanIdStatsId OBJECT-TYPE + SYNTAX Integer32 (1..4094) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The unique identifier of the VLAN monitored for + this specific statistics collection. + + Tagged packets match the VID for the range between 1 and 4094. + An external RMON probe MAY detect VID=0 on an Inter Switch + Link, in which case the packet belongs to a VLAN determined by + the PVID of the ingress port. The VLAN to which such a packet + belongs can be determined only by a RMON probe internal to the + switch." + REFERENCE + "Draft Standard for Virtual Bridged Local Area Networks, + P802.1Q/D10, chapter 3.13" + ::= { smonVlanIdStatsEntry 1 } + + smonVlanIdStatsTotalPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets counted on this VLAN." + ::= { smonVlanIdStatsEntry 2 } + + smonVlanIdStatsTotalOverflowPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated smonVlanIdStatsTotalPkts + counter has overflowed." + ::= { smonVlanIdStatsEntry 3 } + + smonVlanIdStatsTotalHCPkts OBJECT-TYPE + SYNTAX Counter64 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets counted on this VLAN." + ::= { smonVlanIdStatsEntry 4 } + + smonVlanIdStatsTotalOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets counted on this VLAN." + ::= { smonVlanIdStatsEntry 5 } + + smonVlanIdStatsTotalOverflowOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated smonVlanIdStatsTotalOctets + counter has overflowed." + ::= { smonVlanIdStatsEntry 6 } + + smonVlanIdStatsTotalHCOctets OBJECT-TYPE + SYNTAX Counter64 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets counted on this VLAN." + ::= { smonVlanIdStatsEntry 7 } + + smonVlanIdStatsNUcastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of non-unicast packets counted on this + VLAN." + ::= { smonVlanIdStatsEntry 8 } + + smonVlanIdStatsNUcastOverflowPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated smonVlanIdStatsNUcastPkts + counter has overflowed." + ::= { smonVlanIdStatsEntry 9 } + + smonVlanIdStatsNUcastHCPkts OBJECT-TYPE + SYNTAX Counter64 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of non-unicast packets counted on + this VLAN." + ::= { smonVlanIdStatsEntry 10 } + + smonVlanIdStatsNUcastOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of non-unicast octets counted on + this VLAN." + ::= { smonVlanIdStatsEntry 11 } + + smonVlanIdStatsNUcastOverflowOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated + smonVlanIdStatsNUcastOctets counter has overflowed." + ::= { smonVlanIdStatsEntry 12 } + + smonVlanIdStatsNUcastHCOctets OBJECT-TYPE + SYNTAX Counter64 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of Non-unicast octets counted on + this VLAN." + ::= { smonVlanIdStatsEntry 13 } + + smonVlanIdStatsCreateTime OBJECT-TYPE + SYNTAX LastCreateTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this entry was last + activated. This object allows to a management station to + detect deletion and recreation cycles between polls." + ::= { smonVlanIdStatsEntry 14 } + + -- smonPrioStatsControlTable + + smonPrioStatsControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmonPrioStatsControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Controls the setup of priority statistics tables. + + The smonPrioStatsControlTable allows configuration of + collections based on the value of the 3-bit user priority + field encoded in the Tag Control Information (TCI) field + according to [19],[20]. + + Note that this table merely reports priority as encoded in + the VLAN headers, not the priority (if any) given to the + frame for the actual switching purposes." + + ::= { smonStats 3 } + + smonPrioStatsControlEntry OBJECT-TYPE + SYNTAX SmonPrioStatsControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the smonPrioStatsControlTable." + INDEX { smonPrioStatsControlIndex } + ::= { smonPrioStatsControlTable 1 } + + + SmonPrioStatsControlEntry ::= SEQUENCE { + smonPrioStatsControlIndex Integer32, + smonPrioStatsControlDataSource DataSource, + smonPrioStatsControlCreateTime LastCreateTime, + smonPrioStatsControlOwner OwnerString, + smonPrioStatsControlStatus RowStatus + } + + smonPrioStatsControlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique arbitrary index for this smonPrioStatsControlEntry." + ::= { smonPrioStatsControlEntry 1 } + + smonPrioStatsControlDataSource OBJECT-TYPE + SYNTAX DataSource + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source of data for this set of VLAN statistics. + + This object MAY NOT be modified if the associated + smonPrioStatsControlStatus object is equal to active(1)." + ::= { smonPrioStatsControlEntry 2 } + + smonPrioStatsControlCreateTime OBJECT-TYPE + SYNTAX LastCreateTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this entry was created. + This object allows to a management station to + detect deletion and recreation cycles between polls." + + ::= { smonPrioStatsControlEntry 3 } + + smonPrioStatsControlOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Administratively assigned named of the owner of this entry. + It usually defines the entity that created this entry and is + therefore using the resources assigned to it, though there is + no enforcement mechanism, nor assurance that rows created are + ever used." + ::= { smonPrioStatsControlEntry 4 } + + smonPrioStatsControlStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this row. + An entry MAY NOT exist in the active state unless all + objects in the entry have an appropriate value. + + If this object is not equal to active(1), all associated + entries in the smonPrioStatsTable SHALL be deleted." + ::= { smonPrioStatsControlEntry 5 } + + -- The Priority Statistics Table + + smonPrioStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmonPrioStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains the priority statistics. The collections are based + on the value of the 3-bit user priority field encoded in the + Tag Control Information (TCI) field according to [19], [20]. + Note that this table merely reports priority as encoded in + the VLAN headers, not the priority (if any) given to the + frame for the actual switching purposes. + + No garbage collection is designed for this table, as there + always are at most eight rows per statistical set, and the + low memory requirements do not justify the implementation of + such a mechanism." + ::= { smonStats 4 } + + smonPrioStatsEntry OBJECT-TYPE + SYNTAX SmonPrioStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in smonPrioStatsTable." + INDEX { smonPrioStatsControlIndex, smonPrioStatsId } + ::= { smonPrioStatsTable 1 } + + SmonPrioStatsEntry ::= SEQUENCE { + smonPrioStatsId Integer32, + smonPrioStatsPkts Counter32, + smonPrioStatsOverflowPkts Counter32, + smonPrioStatsHCPkts Counter64, + smonPrioStatsOctets Counter32, + smonPrioStatsOverflowOctets Counter32, + smonPrioStatsHCOctets Counter64 + } + + smonPrioStatsId OBJECT-TYPE + SYNTAX Integer32 (0..7) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The unique identifier of the priority level monitored for + this specific statistics collection." + REFERENCE + " Draft Standard for Virtual Bridged Local Area Networks, + P802.1Q/D10, chapter 4.3.2.1" + ::= { smonPrioStatsEntry 1 } + + smonPrioStatsPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets counted on + this priority level." + ::= { smonPrioStatsEntry 2 } + + smonPrioStatsOverflowPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated smonPrioStatsPkts + counter has overflowed." + ::= { smonPrioStatsEntry 3 } + + smonPrioStatsHCPkts OBJECT-TYPE + SYNTAX Counter64 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets counted on + this priority level." + ::= { smonPrioStatsEntry 4 } + + smonPrioStatsOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets counted on + this priority level." + ::= { smonPrioStatsEntry 5 } + + smonPrioStatsOverflowOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated smonPrioStatsOctets + counter has overflowed." + ::= { smonPrioStatsEntry 6 } + + smonPrioStatsHCOctets OBJECT-TYPE + SYNTAX Counter64 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets counted on + this priority level." + ::= { smonPrioStatsEntry 7 } + + + portCopyTable OBJECT-TYPE + SYNTAX SEQUENCE OF PortCopyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " Port Copy provides the ability to copy all frames from a + specified source to specified destination within a switch. + Source and destinations MUST be ifEntries, as defined by [22]. + One to one, one to many, many to one and many to many source to + destination relationships may be configured. + + Applicable counters on the destination will increment for all + packets transiting the port, be it by normal bridging/switching + or due to packet copy. + Note that this table manages no RMON data collection by itself, + and an agent may possibly implement no RMON objects except + objects related to the port copy operation defined by the + portCopyCompliance conformance macro. That allows for a switch + with no other embedded RMON capability to perform port copy + operations to a destination port at which a different external + RMON probe is connected. + + One to one, many to one and one to many source to destination + relationships may be configured. + + Each row that exists in this table defines such a + relationship. By disabling a row in this table the port copy + relationship no longer exists. + + The number of entries and the types of port copies (1-1, + many-1, 1-many) are implementation specific and could + possibly be dynamic due to changing resource availability. + + In order to configure a source to destination portCopy + relationship, both source and destination interfaces MUST be + present as an ifEntry in the ifTable and their respective + ifAdminStatus and ifOperStatus values MUST be equal to + 'up(1)'. If the value of any of those two objects changes + after the portCopyEntry is activated, portCopyStatus will + transition to 'notReady(3)'. + + The capability of an interface to be source or destination of + a port copy operation is described by the 'copySourcePort(0)' + and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits + SHOULD be appropriately set by the agent, in order to allow + for a portCopyEntry to be created. + + Applicable counters on the destination will increment for all + packets transmitted, be it by normal bridging/switching or + due to packet copy." + ::= { portCopyConfig 1 } + + portCopyEntry OBJECT-TYPE + SYNTAX PortCopyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Describes a particular port copy entry." + INDEX { portCopySource, portCopyDest } + ::= { portCopyTable 1 } + + PortCopyEntry ::= SEQUENCE { + portCopySource + InterfaceIndex, + portCopyDest + InterfaceIndex, + portCopyDestDropEvents + Counter32, + portCopyDirection + INTEGER, + portCopyStatus + RowStatus + } + + + portCopySource OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifIndex of the source which will have all packets + redirected to the destination as defined by portCopyDest." + ::= { portCopyEntry 1 } + + portCopyDest OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Defines the ifIndex destination for the copy operation." + ::= { portCopyEntry 2 } + + portCopyDestDropEvents OBJECT-TYPE + SYNTAX Counter32 + UNITS "events" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of events in which port copy packets were + dropped by the switch at the destination port due to lack of + resources. + + Note that this number is not necessarily the number of + packets dropped; it is just the number of times this + condition has been detected. + + A single dropped event counter is maintained for each + portCopyDest. Thus all instances associated with a given + portCopyDest will have the same portCopyDestDropEvents + value." + ::= { portCopyEntry 3 } + + portCopyDirection OBJECT-TYPE + SYNTAX INTEGER { + copyRxOnly(1), + copyTxOnly(2), + copyBoth(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object affects the way traffic is copied from a switch + source port, for the indicated port copy operation. + + + If this object has the value 'copyRxOnly(1)', then only + traffic received on the indicated source port will be copied + to the indicated destination port. + + If this object has the value 'copyTxOnly(2)', then only + traffic transmitted out the indicated source port will be + copied to the indicated destination port. + + If this object has the value 'copyBoth(3)', then all traffic + received or transmitted on the indicated source port will be + copied to the indicated destination port. + + The creation and deletion of instances of this object is + controlled by the portCopyRowStatus object. Note that there + is no guarantee that changes in the value of this object + performed while the associated portCopyRowStatus object is + equal to active will not cause traffic discontinuities in the + packet stream." + DEFVAL { copyBoth } + ::= { portCopyEntry 4 } + + portCopyStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defines the status of the port copy entry. + + In order to configure a source to destination portCopy + relationship, both source and destination interfaces MUST be + present as an ifEntry in the ifTable and their respective + ifAdminStatus and ifOperStatus values MUST be equal to + 'up(1)'. If the value of any of those two objects changes + after the portCopyEntry is activated, portCopyStatus will + transition to 'notReady(3)'. + + The capability of an interface to be source or destination of + a port copy operation is described by the 'copySourcePort(0)' + and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits + SHOULD be appropriately set by the agent, in order to allow + for a portCopyEntry to be created." + ::= { portCopyEntry 5 } + + -- smonRegistrationPoints + -- defines a set of OIDs for registration purposes of entities + -- supported by the SMON MIB. + + + smonVlanDataSource + OBJECT IDENTIFIER ::= { smonRegistrationPoints 1} + + -- Defined for use as an SmonDataSource. A single integer parameter + -- is appended to the end of this OID when actually encountered in + -- the dataSourceCapsTable, which represents a positive, non-zero + -- VLAN identifier value. + + -- Conformance Macros + + smonMIBCompliances OBJECT IDENTIFIER ::= { rmonConformance 3} + smonMIBGroups OBJECT IDENTIFIER ::= { rmonConformance 4} + + smonMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for full conformance with the SMON + MIB" + MODULE -- this module + MANDATORY-GROUPS {dataSourceCapsGroup, + smonVlanStatsGroup, + smonPrioStatsGroup, + portCopyConfigGroup, + smonInformationGroup} + + GROUP smonHcTo100mbGroup + DESCRIPTION + "This group of VLAN statistics counter are mandatory only for + those network interfaces for which the corresponding ifSpeed + can be greater than 10MB/sec and less than or equal to + 100MB/sec." + + GROUP smonHc100mbPlusGroup + DESCRIPTION + "This group of VLAN statistics counters are mandatory only for + those network interfaces for which the corresponding ifSpeed + can be more than 100MB/sec. This group of VLAN statistics is + also mandatory for smonDataSources of type VLAN or + entPhysicalEntry." + + ::= { smonMIBCompliances 1 } + + smonMIBVlanStatsCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for conformance with the SMON MIB + with support for VLAN Statistics. Mandatory for a SMON probe + in environment where IEEE 802.1Q bridging is implemented." + + + MODULE -- this module + MANDATORY-GROUPS {dataSourceCapsGroup, + smonVlanStatsGroup, + smonInformationGroup} + GROUP hcVlanTo100mbGroup + DESCRIPTION + "This group of VLAN statistics counter are mandatory only + for those network interfaces for which the corresponding + ifSpeed can be up to and including 100MB/sec." + + GROUP hcVlan100mbPlusGroup + DESCRIPTION + "This group of VLAN statistics counters are mandatory only for + those network interfaces for which the corresponding ifSpeed + is greater than 100MB/sec. This group of VLAN statistics is + also mandatory for smonDataSources of type VLAN or + entPhysicalEntry." + + ::= { smonMIBCompliances 2 } + + smonMIBPrioStatsCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for conformance with the SMON MIB + with support for priority level Statistics. Mandatory for a + SMON probe in a environment where IEEE 802.1p + priority-switching is implemented." + MODULE -- this module + MANDATORY-GROUPS {dataSourceCapsGroup, + smonPrioStatsGroup, + smonInformationGroup} + + GROUP hcPrioTo100mbGroup + DESCRIPTION + "This group of VLAN priority statistics counters are mandatory + only for those network interfaces for which the corresponding + ifSpeed can be up to and including 100MB/sec." + + GROUP hcPrio100mbPlusGroup + DESCRIPTION + "This group is mandatory only for those network + interfaces for which the corresponding ifSpeed is greater + than 100MB/sec. This group of VLAN priority + statistics is also mandatory for smonDataSources of type + VLAN or entPhysicalEntry" + + ::= { smonMIBCompliances 3 } + + + portCopyCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for conformance with the port copy + functionality defined by the SMON MIB" + MODULE -- this module + MANDATORY-GROUPS {dataSourceCapsGroup, + portCopyConfigGroup, + smonInformationGroup} + + ::= { smonMIBCompliances 4} + + dataSourceCapsGroup OBJECT-GROUP + OBJECTS { dataSourceRmonCaps, + dataSourceCopyCaps, + dataSourceCapsIfIndex} + STATUS current + DESCRIPTION + "Defines the objects that describe the capabilities of RMON + data sources." + ::= {smonMIBGroups 1 } + + smonVlanStatsGroup OBJECT-GROUP + OBJECTS { smonVlanStatsControlDataSource, + smonVlanStatsControlCreateTime, + smonVlanStatsControlOwner, + smonVlanStatsControlStatus, + smonVlanIdStatsTotalPkts, + smonVlanIdStatsTotalOctets, + smonVlanIdStatsNUcastPkts, + smonVlanIdStatsCreateTime} + STATUS current + DESCRIPTION + "Defines the switch monitoring specific statistics - per VLAN + Id on interfaces of 10MB or less." + ::= { smonMIBGroups 2 } + + smonPrioStatsGroup OBJECT-GROUP + OBJECTS { smonPrioStatsControlDataSource, + smonPrioStatsControlCreateTime, + smonPrioStatsControlOwner, + smonPrioStatsControlStatus, + smonPrioStatsPkts, + smonPrioStatsOctets} + STATUS current + DESCRIPTION + "Defines the switch monitoring specific statistics - per VLAN + Id on interface." + + + ::= { smonMIBGroups 3 } + + smonHcTo100mbGroup OBJECT-GROUP + OBJECTS { smonVlanIdStatsTotalOverflowOctets, + smonVlanIdStatsTotalHCOctets, + smonPrioStatsOverflowOctets, + smonPrioStatsHCOctets} + STATUS current + DESCRIPTION + "Defines the additional high capacity statistics needed to be + kept on interfaces with ifSpeed greater than 10MB/sec and + less than or equal to 100MB/sec." + ::= { smonMIBGroups 4 } + + smonHc100mbPlusGroup OBJECT-GROUP + OBJECTS { smonVlanIdStatsTotalOverflowPkts, + smonVlanIdStatsTotalHCPkts, + smonVlanIdStatsTotalOverflowOctets, + smonVlanIdStatsTotalHCOctets, + smonVlanIdStatsNUcastOverflowPkts, + smonVlanIdStatsNUcastHCPkts, + smonPrioStatsOverflowPkts, + smonPrioStatsHCPkts, + smonPrioStatsOverflowOctets, + smonPrioStatsHCOctets} + STATUS current + DESCRIPTION + "Defines the additional high capacity statistics needed to be + kept on interfaces with ifSpeed of more than 100MB/sec. These + statistics MUST also be kept on smonDataSources of type VLAN + or entPhysicalEntry." + ::= { smonMIBGroups 5 } + + hcVlanTo100mbGroup OBJECT-GROUP + OBJECTS { smonVlanIdStatsTotalOverflowOctets, + smonVlanIdStatsTotalHCOctets} + STATUS current + DESCRIPTION + "Defines the additional high capacity VLAN statistics + needed to be kept on interfaces with ifSpeed greater than + 10MB/sec and less than or equal to 100MB/sec." + ::= { smonMIBGroups 6 } + + hcVlan100mbPlusGroup OBJECT-GROUP + OBJECTS { smonVlanIdStatsTotalOverflowPkts, + smonVlanIdStatsTotalHCPkts, + smonVlanIdStatsTotalOverflowOctets, + smonVlanIdStatsTotalHCOctets, + smonVlanIdStatsNUcastOverflowPkts, + smonVlanIdStatsNUcastHCPkts} + STATUS current + DESCRIPTION + "Defines the additional high capacity VLAN statistics + needed to be kept on interfaces with ifSpeed of more than + 100MB/sec. These statistics MUST also be kept on + smonDataSources of type VLAN or entPhysicalEntry." + ::= { smonMIBGroups 7 } + + hcPrioTo100mbGroup OBJECT-GROUP + OBJECTS { smonPrioStatsOverflowOctets, + smonPrioStatsHCOctets } + STATUS current + DESCRIPTION + "Defines the additional high capacity VLAN priority + statistics needed to be kept on interfaces with + ifSpeed of greater than 10MB/sec and less than or equal + to 100MB/sec." + ::= { smonMIBGroups 8 } + + hcPrio100mbPlusGroup OBJECT-GROUP + OBJECTS { smonPrioStatsOverflowPkts, + smonPrioStatsHCPkts, + smonPrioStatsOverflowOctets, + smonPrioStatsHCOctets} + STATUS current + DESCRIPTION + "Defines the additional high capacity VLAN priority + statistics needed to be kept on interfaces with + ifSpeed of greater than 100MB/sec. These statistics MUST + also be kept on smonDataSources of type VLAN or + entPhysicalEntry." + ::= { smonMIBGroups 9 } + + smonVlanStatsExtGroup OBJECT-GROUP + OBJECTS {smonVlanIdStatsNUcastOctets, + smonVlanIdStatsNUcastOverflowOctets, + smonVlanIdStatsNUcastHCOctets} + STATUS current + DESCRIPTION + "Defines the switch monitoring specific statistics for systems + capable of counting non-unicast octets for a given dataSource + (as described in the dataSourceRmonCaps object)." + ::= { smonMIBGroups 10 } + + smonInformationGroup OBJECT-GROUP + OBJECTS { smonCapabilities } + STATUS current + DESCRIPTION + "An indication of the SMON capabilities supported by this + agent." + ::= { smonMIBGroups 11 } + + portCopyConfigGroup OBJECT-GROUP + OBJECTS { portCopyDestDropEvents, + portCopyDirection, + portCopyStatus + } + STATUS current + DESCRIPTION + "Defines the control objects for copy port operations." + ::= { smonMIBGroups 12 } + + END |