summaryrefslogtreecommitdiff
path: root/MIBS/SONET-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/SONET-MIB')
-rw-r--r--MIBS/SONET-MIB2360
1 files changed, 2360 insertions, 0 deletions
diff --git a/MIBS/SONET-MIB b/MIBS/SONET-MIB
new file mode 100644
index 0000000..8dbf604
--- /dev/null
+++ b/MIBS/SONET-MIB
@@ -0,0 +1,2360 @@
+SONET-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE,
+ Integer32, transmission
+ FROM SNMPv2-SMI
+ DisplayString, TruthValue
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ ifIndex
+ FROM IF-MIB
+ PerfCurrentCount, PerfIntervalCount
+ FROM PerfHist-TC-MIB;
+
+-- This is the MIB module for the SONET/SDH Interface objects.
+
+sonetMIB MODULE-IDENTITY
+ LAST-UPDATED "200308110000Z"
+ ORGANIZATION "IETF AToM MIB Working Group"
+ CONTACT-INFO
+ "WG charter:
+ http://www.ietf.org/html.charters/atommib-charter.html
+
+ Mailing Lists:
+ General Discussion: atommib@research.telcordia.com
+ To Subscribe: atommib-request@research.telcordia.com
+
+ Kaj Tesink
+ Telcordia Technologies
+ Tel: (732) 758-5254
+ Fax: (732) 758-2269
+ E-mail: kaj@research.telcordia.com."
+ DESCRIPTION
+ "The MIB module to describe SONET/SDH interface objects.
+
+ Copyright (C) The Internet Society (2003). This version
+ of this MIB module is part of RFC 3592; see the RFC
+ itself for full legal notices."
+ REVISION "200308110000Z"
+ DESCRIPTION
+ "The key changes made to this MIB module
+ since its publication in RFC 2558
+ are as follows.
+
+ (1) Corrected typographical error
+ (bellcore1991(2) in sonetSESthresholdSet)
+
+ (2) Added support for sts192cSTM64(6) and
+ sts768cSTM256(7) in sonetPathCurrentWidth
+
+ (3) Corrected description of the applicability
+ of VTs for SDH for improved accuracy
+
+ (4) Added clarification in the SES description that
+ CV counts should be frozen during SESs
+
+ (5) Corrected typographical errors:
+ - Line Alarm Indication Signal description of the
+ Terminology section (20.5 --> 2.5 seconds)
+ - In the Terminology section
+ sonetSESThresholdSet --> sonetSESthresholdSet
+ "
+ REVISION "199810190000Z"
+ DESCRIPTION
+ "The RFC 2558 version of this MIB module.
+ The key changes made to this MIB module
+ since its initial publication in RFC 1595
+ are as follows.
+
+ (1) The MODULE-IDENTITY has been updated to reflect the
+ changes to the MIB.
+
+ (2) Where applicable, the textual conventions
+ PerfCurrentCount and PerfIntervalCount from
+ PerfHist-TC-MIB have been used in place of Gauge32.
+
+ (3) An agent now has the option to delay updates to
+ the various performance counts in lieu of performing
+ retroactive adjustments upon entering into or exiting
+ from unavailable time. This implementation option is
+ described in Appendix A of this memo.
+
+ (4) In order to make the SONET-MIB more useful for
+ circuit provisioning, the formerly read-only objects
+ sonetMediumType, sonetMediumLineCoding,
+ sonetMediumLineType, and sonetMediumCircuitIdentifier
+ have been given a MAX-ACCESS of read-write. The
+ MIN-ACCESS remains read-only.
+
+ (5) The DESCRIPTION clause for sonetMediumTimeElapsed has
+ been updated to describe its behaviour if the duration
+ of the current interval exceeds the maximum value.
+
+ (6) The DESCRIPTION clause for sonetMediumValidIntervals
+ has been updated to describe its behaviour when some
+ intervals may be unavailable, and the object
+ sonetMediumInvalidIntervals has been added to keep
+ count of the number of missing intervals (if any).
+
+ (7) The object sonetMediumLoopbackConfig has been added
+ to enable or disable loopback configurations.
+
+ (8) Because the error count thresholds for declaring
+ severely errored seconds that are specified in ANSI
+ T1.231-1993, ITU-T G.826-1995, and ANSI T1.231-1997
+ are all different from each other and from the thresholds
+ specified in RFC 1595, an enumerated INTEGER object
+ sonetSESthresholdSet has been added to allow an agent
+ to specify which threshold set is in use. Text has
+ been added to Section 3 stating that if this object is
+ not implemented the thresholds specified in RFC 1595
+ should be assumed, and the table containing those
+ thresholds has been moved to Appendix B of this memo.
+ (9) A column with SYNTAX TruthValue has been added to each
+ interval table. The purpose of the additional column
+ is to indicate, for each interval, whether the data
+ is valid in the sense intended by ANSI T1.231 clause
+ 9.1.2.2 [T1.231a][T1.231b]. The objects in question are:
+
+ sonetSectionIntervalValidData
+ sonetLineIntervalValidData
+ sonetFarEndLineIntervalValidData
+ sonetPathIntervalValidData
+ sonetFarEndPathIntervalValidData
+ sonetVTIntervalValidData
+ sonetFarEndVTIntervalValidData
+
+ (10) The ranges for sonetPathCurrentStatus and
+ sonetVTCurrentStatus have been made consistent
+ with the DESCRIPTION clauses.
+
+ (11) The conformance information has been updated. Previous
+ conformance information from RFC 1595 has been
+ deprecated. Some typographical errors in the deprecated
+ section have been corrected in order to prevent
+ MIB compilation errors."
+
+ REVISION "199401030000Z"
+ DESCRIPTION
+ "The RFC 1595 version of this MIB module."
+
+ ::= { transmission 39 }
+
+-- This is the MIB module for the SONET/SDH objects
+
+sonetObjects OBJECT IDENTIFIER ::= { sonetMIB 1 }
+
+sonetObjectsPath OBJECT IDENTIFIER ::= { sonetMIB 2 }
+
+sonetObjectsVT OBJECT IDENTIFIER ::= { sonetMIB 3 }
+
+-- groups in the SONET/SDH MIB module
+
+sonetMedium OBJECT IDENTIFIER ::= { sonetObjects 1 }
+
+sonetSection OBJECT IDENTIFIER ::= { sonetObjects 2 }
+
+sonetLine OBJECT IDENTIFIER ::= { sonetObjects 3 }
+
+sonetFarEndLine OBJECT IDENTIFIER ::= { sonetObjects 4 }
+
+sonetPath OBJECT IDENTIFIER ::= { sonetObjectsPath 1 }
+
+sonetFarEndPath OBJECT IDENTIFIER ::= { sonetObjectsPath 2 }
+
+sonetVT OBJECT IDENTIFIER ::= { sonetObjectsVT 1 }
+
+sonetFarEndVT OBJECT IDENTIFIER ::= { sonetObjectsVT 2 }
+
+-- the SONET/SDH Medium group
+
+-- SONET/SDH interfaces for some applications may be electrical
+-- interfaces and not optical interfaces. This group handles
+-- the configuration information for both optical SONET/SDH
+-- interfaces and electrical SONET/SDH interfaces.
+
+sonetMediumTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetMediumEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Medium table."
+ ::= { sonetMedium 1 }
+
+sonetMediumEntry OBJECT-TYPE
+ SYNTAX SonetMediumEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Medium table."
+ INDEX { ifIndex }
+ ::= { sonetMediumTable 1 }
+
+SonetMediumEntry ::=
+ SEQUENCE {
+ sonetMediumType INTEGER,
+ sonetMediumTimeElapsed Integer32,
+ sonetMediumValidIntervals Integer32,
+ sonetMediumLineCoding INTEGER,
+ sonetMediumLineType INTEGER,
+ sonetMediumCircuitIdentifier DisplayString,
+ sonetMediumInvalidIntervals Integer32,
+ sonetMediumLoopbackConfig BITS
+ }
+
+sonetMediumType OBJECT-TYPE
+ SYNTAX INTEGER {
+ sonet(1),
+ sdh(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable identifies whether a SONET
+ or a SDH signal is used across this interface."
+ ::= { sonetMediumEntry 1 }
+
+sonetMediumTimeElapsed OBJECT-TYPE
+ SYNTAX Integer32 (1..900)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds, including partial seconds,
+ that have elapsed since the beginning of the current
+ measurement period. If, for some reason, such as an
+ adjustment in the system's time-of-day clock, the
+ current interval exceeds the maximum value, the
+ agent will return the maximum value."
+ ::= { sonetMediumEntry 2 }
+
+sonetMediumValidIntervals OBJECT-TYPE
+ SYNTAX Integer32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of previous 15-minute intervals
+ for which data was collected.
+ A SONET/SDH interface must be capable
+ of supporting at least n intervals.
+ The minimum value of n is 4.
+ The default of n is 32.
+ The maximum value of n is 96.
+ The value will be <n> unless the measurement was
+ (re-)started within the last (<n>*15) minutes, in which
+ case the value will be the number of complete 15
+ minute intervals for which the agent has at least
+ some data. In certain cases (e.g., in the case
+ where the agent is a proxy) it is possible that some
+ intervals are unavailable. In this case, this
+ interval is the maximum interval number for
+ which data is available. "
+ ::= { sonetMediumEntry 3 }
+
+sonetMediumLineCoding OBJECT-TYPE
+ SYNTAX INTEGER {
+ sonetMediumOther(1),
+ sonetMediumB3ZS(2),
+ sonetMediumCMI(3),
+ sonetMediumNRZ(4),
+ sonetMediumRZ(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable describes the line coding for
+ this interface. The B3ZS and CMI are used for
+ electrical SONET/SDH signals (STS-1 and STS-3).
+ The Non-Return to Zero (NRZ) and the Return
+ to Zero are used for optical SONET/SDH signals."
+ ::= { sonetMediumEntry 4 }
+
+sonetMediumLineType OBJECT-TYPE
+ SYNTAX INTEGER {
+ sonetOther(1),
+ sonetShortSingleMode(2),
+ sonetLongSingleMode(3),
+ sonetMultiMode(4),
+ sonetCoax(5),
+ sonetUTP(6)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable describes the line type for
+ this interface. The line types are
+ Short and Long Range
+ Single Mode fiber or Multi-Mode fiber interfaces,
+ and coax and UTP for electrical interfaces. The
+ value sonetOther should be used when the Line Type is
+ not one of the listed values."
+ ::= { sonetMediumEntry 5 }
+
+sonetMediumCircuitIdentifier OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This variable contains the transmission
+ vendor's circuit identifier, for the
+ purpose of facilitating troubleshooting.
+ Note that the circuit identifier, if available,
+ is also represented by ifPhysAddress."
+ ::= { sonetMediumEntry 6 }
+
+sonetMediumInvalidIntervals OBJECT-TYPE
+ SYNTAX Integer32 (0..96)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of intervals in the range from
+ 0 to sonetMediumValidIntervals for which no
+ data is available. This object will typically
+ be zero except in cases where the data for some
+ intervals are not available (e.g., in proxy
+ situations)."
+ ::= { sonetMediumEntry 7 }
+
+sonetMediumLoopbackConfig OBJECT-TYPE
+ SYNTAX BITS {
+ sonetNoLoop(0),
+ sonetFacilityLoop(1),
+ sonetTerminalLoop(2),
+ sonetOtherLoop(3) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The current loopback state of the SONET/SDH interface. The
+ values mean:
+
+ sonetNoLoop
+ Not in the loopback state. A device that is not
+ capable of performing a loopback on this interface
+ shall always return this value.
+
+ sonetFacilityLoop
+ The received signal at this interface is looped back
+ out through the corresponding transmitter in the return
+ direction.
+
+ sonetTerminalLoop
+ The signal that is about to be transmitted is connected
+ to the associated incoming receiver.
+
+ sonetOtherLoop
+ Loopbacks that are not defined here."
+
+ ::= { sonetMediumEntry 8 }
+
+sonetSESthresholdSet OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ bellcore1991(2),
+ ansi1993(3),
+ itu1995(4),
+ ansi1997(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "An enumerated integer indicating which
+ recognized set of SES thresholds that
+ the agent uses for determining severely
+ errored seconds and unavailable time.
+
+ other(1)
+ None of the following.
+
+ bellcore1991(2)
+ Bellcore TR-NWT-000253, 1991 [TR253], or
+ ANSI T1M1.3/93-005R2, 1993 [T1M1.3].
+ See also Appendix B.
+
+ ansi1993(3)
+ ANSI T1.231, 1993 [T1.231a], or
+ Bellcore GR-253-CORE, Issue 2, 1995 [GR253]
+
+ itu1995(4)
+ ITU Recommendation G.826, 1995 [G.826]
+
+ ansi1997(5)
+ ANSI T1.231, 1997 [T1.231b]
+
+ If a manager changes the value of this
+ object then the SES statistics collected
+ prior to this change must be invalidated."
+ ::= { sonetMedium 2 }
+
+-- the SONET/SDH Section group
+
+-- this group consists of 2 tables:
+-- - the SONET/SDH Section Current Table
+-- - the SONET/SDH Section Interval Table
+
+-- the SONET/SDH Section Current Table
+
+-- The SONET/SDH Section
+-- current table contains various statistics
+-- being collected for the current 15 minute interval.
+
+
+sonetSectionCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetSectionCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Section Current table."
+ ::= { sonetSection 1 }
+
+sonetSectionCurrentEntry OBJECT-TYPE
+ SYNTAX SonetSectionCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Section Current table."
+ INDEX { ifIndex }
+ ::= { sonetSectionCurrentTable 1 }
+
+SonetSectionCurrentEntry ::=
+ SEQUENCE {
+ sonetSectionCurrentStatus Integer32,
+ sonetSectionCurrentESs PerfCurrentCount,
+ sonetSectionCurrentSESs PerfCurrentCount,
+ sonetSectionCurrentSEFSs PerfCurrentCount,
+ sonetSectionCurrentCVs PerfCurrentCount
+ }
+
+sonetSectionCurrentStatus OBJECT-TYPE
+ SYNTAX Integer32 (1..6)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the
+ status of the interface.
+ The sonetSectionCurrentStatus
+ is a bit map represented
+ as a sum, therefore,
+ it can represent multiple defects
+ simultaneously.
+ The sonetSectionNoDefect should be
+ set if and only if
+ no other flag is set.
+
+ The various bit positions are:
+ 1 sonetSectionNoDefect
+ 2 sonetSectionLOS
+ 4 sonetSectionLOF"
+ ::= { sonetSectionCurrentEntry 1 }
+
+sonetSectionCurrentESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Errored
+ Seconds encountered by a SONET/SDH
+ Section in the current 15 minute interval."
+ ::= { sonetSectionCurrentEntry 2 }
+
+sonetSectionCurrentSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Seconds
+ encountered by a SONET/SDH Section in the current 15
+ minute interval."
+ ::= { sonetSectionCurrentEntry 3 }
+
+sonetSectionCurrentSEFSs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Framing Seconds
+ encountered by a SONET/SDH Section in the current
+ 15 minute interval."
+ ::= { sonetSectionCurrentEntry 4 }
+
+sonetSectionCurrentCVs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Coding
+ Violations encountered by a
+ SONET/SDH Section in the current 15 minute interval."
+ ::= { sonetSectionCurrentEntry 5 }
+
+-- the SONET/SDH Section Interval Table
+
+-- The SONET/SDH Section Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation. The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetSectionIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetSectionIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Section Interval table."
+ ::= { sonetSection 2 }
+
+sonetSectionIntervalEntry OBJECT-TYPE
+ SYNTAX SonetSectionIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Section Interval table."
+ INDEX { ifIndex,
+ sonetSectionIntervalNumber }
+ ::= { sonetSectionIntervalTable 1 }
+
+SonetSectionIntervalEntry ::=
+ SEQUENCE {
+ sonetSectionIntervalNumber Integer32,
+ sonetSectionIntervalESs PerfIntervalCount,
+ sonetSectionIntervalSESs PerfIntervalCount,
+ sonetSectionIntervalSEFSs PerfIntervalCount,
+ sonetSectionIntervalCVs PerfIntervalCount,
+ sonetSectionIntervalValidData TruthValue
+ }
+
+sonetSectionIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the
+ interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently
+ completed 15 minute interval,
+ and the interval identified
+ by N is the interval immediately preceding the
+ one identified
+ by N-1."
+ ::= { sonetSectionIntervalEntry 1 }
+
+sonetSectionIntervalESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Errored Seconds encountered
+ by a SONET/SDH Section in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetSectionIntervalEntry 2 }
+
+sonetSectionIntervalSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Seconds
+ encountered by a SONET/SDH Section in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetSectionIntervalEntry 3 }
+
+sonetSectionIntervalSEFSs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Framing Seconds
+ encountered by a SONET/SDH Section in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetSectionIntervalEntry 4 }
+
+sonetSectionIntervalCVs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Coding
+ Violations encountered by a
+ SONET/SDH Section in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetSectionIntervalEntry 5 }
+
+
+sonetSectionIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this
+ interval is valid."
+ ::= { sonetSectionIntervalEntry 6 }
+
+-- the SONET/SDH Line group
+
+-- this group consists of 2 tables:
+-- - the SONET/SDH Line Current Table
+-- - the SONET/SDH Line Interval Table
+
+-- the SONET/SDH Line Current Table
+
+-- The SONET/SDH Line
+-- current table contains various statistics
+-- being collected for the current 15 minute interval.
+
+sonetLineCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetLineCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Line Current table."
+ ::= { sonetLine 1 }
+
+sonetLineCurrentEntry OBJECT-TYPE
+ SYNTAX SonetLineCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Line Current table."
+ INDEX { ifIndex }
+ ::= { sonetLineCurrentTable 1 }
+
+SonetLineCurrentEntry ::=
+ SEQUENCE {
+ sonetLineCurrentStatus Integer32,
+ sonetLineCurrentESs PerfCurrentCount,
+ sonetLineCurrentSESs PerfCurrentCount,
+ sonetLineCurrentCVs PerfCurrentCount,
+ sonetLineCurrentUASs PerfCurrentCount
+ }
+
+
+sonetLineCurrentStatus OBJECT-TYPE
+ SYNTAX Integer32 (1..6)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the
+ status of the interface.
+ The sonetLineCurrentStatus
+ is a bit map represented
+ as a sum, therefore,
+ it can represent multiple defects
+ simultaneously.
+ The sonetLineNoDefect should be
+ set if and only if
+ no other flag is set.
+
+ The various bit positions are:
+ 1 sonetLineNoDefect
+ 2 sonetLineAIS
+ 4 sonetLineRDI"
+ ::= { sonetLineCurrentEntry 1 }
+
+sonetLineCurrentESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Errored
+ Seconds encountered by a SONET/SDH
+ Line in the current 15 minute interval."
+ ::= { sonetLineCurrentEntry 2 }
+
+sonetLineCurrentSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Seconds
+ encountered by a SONET/SDH Line in the current 15
+ minute
+ interval."
+ ::= { sonetLineCurrentEntry 3 }
+
+sonetLineCurrentCVs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Coding
+ Violations encountered by a
+ SONET/SDH Line in the current 15 minute interval."
+ ::= { sonetLineCurrentEntry 4 }
+
+sonetLineCurrentUASs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Unavailable Seconds
+ encountered by a SONET/SDH Line in the current 15
+ minute
+ interval."
+ ::= { sonetLineCurrentEntry 5 }
+
+-- the SONET/SDH Line Interval Table
+
+-- The SONET/SDH Line Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation. The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetLineIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetLineIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Line Interval table."
+ ::= { sonetLine 2 }
+
+sonetLineIntervalEntry OBJECT-TYPE
+ SYNTAX SonetLineIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Line Interval table."
+ INDEX { ifIndex,
+ sonetLineIntervalNumber }
+ ::= { sonetLineIntervalTable 1 }
+
+SonetLineIntervalEntry ::=
+ SEQUENCE {
+ sonetLineIntervalNumber Integer32,
+ sonetLineIntervalESs PerfIntervalCount,
+ sonetLineIntervalSESs PerfIntervalCount,
+ sonetLineIntervalCVs PerfIntervalCount,
+ sonetLineIntervalUASs PerfIntervalCount,
+ sonetLineIntervalValidData TruthValue
+ }
+
+sonetLineIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the
+ interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently
+ completed 15 minute interval,
+ and the interval identified
+ by N is the interval immediately preceding the
+ one identified
+ by N-1."
+ ::= { sonetLineIntervalEntry 1 }
+
+sonetLineIntervalESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Errored Seconds encountered
+ by a SONET/SDH Line in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetLineIntervalEntry 2 }
+
+sonetLineIntervalSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Seconds
+ encountered by a SONET/SDH Line in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetLineIntervalEntry 3 }
+
+sonetLineIntervalCVs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Coding
+ Violations encountered by a
+ SONET/SDH Line in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetLineIntervalEntry 4 }
+
+sonetLineIntervalUASs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the
+ number of Unavailable Seconds
+ encountered by a SONET/SDH Line in
+ a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetLineIntervalEntry 5 }
+
+sonetLineIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this
+ interval is valid."
+ ::= { sonetLineIntervalEntry 6 }
+
+-- The SONET/SDH Far End Line group.
+-- This group may only be implemented by SONET/SDH (LTEs)
+-- systems that provide for a far end block error (FEBE)
+-- information at the SONET/SDH Line Layer.
+
+-- This group consists of two tables:
+-- SONET/SDH Far End Line Current Table
+-- SONET/SDH Far End Line Interval Table
+
+-- The SONET/SDH Far End Line Current Table
+
+-- The SONET/SDH Far End Line Current table contains
+-- various statistics being
+-- collected for the current 15 minute interval.
+-- The statistics are collected from the far end
+-- block error code (FEBE)
+-- within the third Z2 byte of the Line Overhead
+-- in Broadband ISDN applications.
+-- The definitions are the same as described for
+-- the near-end information.
+
+sonetFarEndLineCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetFarEndLineCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Far End Line Current table."
+ ::= { sonetFarEndLine 1 }
+
+sonetFarEndLineCurrentEntry OBJECT-TYPE
+ SYNTAX SonetFarEndLineCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Far End Line Current table."
+ INDEX { ifIndex }
+ ::= { sonetFarEndLineCurrentTable 1 }
+
+SonetFarEndLineCurrentEntry ::=
+ SEQUENCE {
+ sonetFarEndLineCurrentESs PerfCurrentCount,
+ sonetFarEndLineCurrentSESs PerfCurrentCount,
+ sonetFarEndLineCurrentCVs PerfCurrentCount,
+ sonetFarEndLineCurrentUASs PerfCurrentCount
+ }
+
+sonetFarEndLineCurrentESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Far
+ End Errored Seconds encountered by a SONET/SDH
+ interface in the current 15 minute interval."
+ ::= { sonetFarEndLineCurrentEntry 1 }
+
+sonetFarEndLineCurrentSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Severely Errored Seconds
+ encountered by a SONET/SDH Medium/Section/Line
+ interface in the current 15 minute
+ interval."
+ ::= { sonetFarEndLineCurrentEntry 2 }
+
+sonetFarEndLineCurrentCVs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Coding Violations reported via
+ the far end block error count
+ encountered by a
+ SONET/SDH Medium/Section/Line
+ interface in the current 15 minute interval."
+ ::= { sonetFarEndLineCurrentEntry 3 }
+
+sonetFarEndLineCurrentUASs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Unavailable Seconds
+ encountered by a
+ SONET/SDH Medium/Section/Line
+ interface in the current 15 minute interval."
+ ::= { sonetFarEndLineCurrentEntry 4 }
+
+-- The SONET/SDH Far End Line Interval Table
+
+-- The SONET/SDH Far End Line Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation. The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetFarEndLineIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetFarEndLineIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Far End Line Interval table."
+ ::= { sonetFarEndLine 2 }
+
+sonetFarEndLineIntervalEntry OBJECT-TYPE
+ SYNTAX SonetFarEndLineIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Far
+ End Line Interval table."
+ INDEX { ifIndex,
+ sonetFarEndLineIntervalNumber }
+ ::= { sonetFarEndLineIntervalTable 1 }
+
+SonetFarEndLineIntervalEntry ::=
+ SEQUENCE {
+ sonetFarEndLineIntervalNumber Integer32,
+ sonetFarEndLineIntervalESs PerfIntervalCount,
+ sonetFarEndLineIntervalSESs PerfIntervalCount,
+ sonetFarEndLineIntervalCVs PerfIntervalCount,
+ sonetFarEndLineIntervalUASs PerfIntervalCount,
+ sonetFarEndLineIntervalValidData TruthValue
+ }
+
+sonetFarEndLineIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the
+ interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently
+ completed 15 minute interval,
+ and the interval identified
+ by N is the interval immediately preceding the
+ one identified
+ by N-1."
+ ::= { sonetFarEndLineIntervalEntry 1 }
+
+sonetFarEndLineIntervalESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Errored Seconds encountered
+ by a SONET/SDH Line
+ interface in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndLineIntervalEntry 2 }
+
+sonetFarEndLineIntervalSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Severely Errored Seconds
+ encountered by a SONET/SDH Line
+ interface in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndLineIntervalEntry 3 }
+
+sonetFarEndLineIntervalCVs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Coding Violations reported via
+ the far end block error count
+ encountered by a
+ SONET/SDH Line
+ interface in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndLineIntervalEntry 4 }
+
+sonetFarEndLineIntervalUASs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Unavailable Seconds
+ encountered by a
+ SONET/SDH Line
+ interface in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndLineIntervalEntry 5 }
+
+sonetFarEndLineIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this
+ interval is valid."
+ ::= { sonetFarEndLineIntervalEntry 6 }
+
+-- the SONET/SDH Path group
+
+-- this group consists of 2 tables:
+-- - the SONET/SDH Path Current Table
+-- - the SONET/SDH Path Interval Table
+
+-- the SONET/SDH Path Current Table
+
+-- The SONET/SDH Path
+-- current table contains various statistics
+-- being collected for the current 15 minute interval.
+
+sonetPathCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetPathCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Path Current table."
+::= { sonetPath 1 }
+
+sonetPathCurrentEntry OBJECT-TYPE
+ SYNTAX SonetPathCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Path Current table."
+ INDEX { ifIndex }
+::= { sonetPathCurrentTable 1 }
+
+SonetPathCurrentEntry ::=
+ SEQUENCE {
+ sonetPathCurrentWidth INTEGER,
+ sonetPathCurrentStatus Integer32,
+ sonetPathCurrentESs PerfCurrentCount,
+ sonetPathCurrentSESs PerfCurrentCount,
+ sonetPathCurrentCVs PerfCurrentCount,
+ sonetPathCurrentUASs PerfCurrentCount
+ }
+
+sonetPathCurrentWidth OBJECT-TYPE
+ SYNTAX INTEGER {
+ sts1(1),
+ sts3cSTM1(2),
+ sts12cSTM4(3),
+ sts24c(4),
+ sts48cSTM16(5),
+ sts192cSTM64(6),
+ sts768cSTM256(7)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A value that indicates the type of the SONET/SDH
+ Path. For SONET, the assigned types are
+ the STS-Nc SPEs, where N = 1, 3, 12, 24, 48, 192 and 768.
+ STS-1 is equal to 51.84 Mbps. For SDH, the assigned
+ types are the STM-Nc VCs, where N = 1, 4, 16, 64 and 256."
+::= { sonetPathCurrentEntry 1 }
+
+sonetPathCurrentStatus OBJECT-TYPE
+ SYNTAX Integer32 (1..62)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the
+ status of the interface.
+ The sonetPathCurrentStatus
+ is a bit map represented
+ as a sum, therefore,
+ it can represent multiple defects
+ simultaneously.
+ The sonetPathNoDefect should be
+ set if and only if
+ no other flag is set.
+
+ The various bit positions are:
+ 1 sonetPathNoDefect
+ 2 sonetPathSTSLOP
+ 4 sonetPathSTSAIS
+ 8 sonetPathSTSRDI
+ 16 sonetPathUnequipped
+ 32 sonetPathSignalLabelMismatch"
+::= { sonetPathCurrentEntry 2 }
+
+sonetPathCurrentESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Errored
+ Seconds encountered by a SONET/SDH
+ Path in the current 15 minute interval."
+::= { sonetPathCurrentEntry 3 }
+
+sonetPathCurrentSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Seconds
+ encountered by a SONET/SDH Path in the current 15
+ minute
+ interval."
+::= { sonetPathCurrentEntry 4 }
+
+sonetPathCurrentCVs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Coding
+ Violations encountered by a
+ SONET/SDH Path in the current 15 minute interval."
+::= { sonetPathCurrentEntry 5 }
+
+sonetPathCurrentUASs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Unavailable Seconds
+ encountered by a Path in the current
+ 15 minute interval."
+::= { sonetPathCurrentEntry 6 }
+
+-- the SONET/SDH Path Interval Table
+
+-- The SONET/SDH Path Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation. The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+
+
+
+sonetPathIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetPathIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Path Interval table."
+::= { sonetPath 2 }
+
+sonetPathIntervalEntry OBJECT-TYPE
+ SYNTAX SonetPathIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Path Interval table."
+ INDEX { ifIndex,
+ sonetPathIntervalNumber }
+::= { sonetPathIntervalTable 1 }
+
+SonetPathIntervalEntry ::=
+ SEQUENCE {
+ sonetPathIntervalNumber Integer32,
+ sonetPathIntervalESs PerfIntervalCount,
+ sonetPathIntervalSESs PerfIntervalCount,
+ sonetPathIntervalCVs PerfIntervalCount,
+ sonetPathIntervalUASs PerfIntervalCount,
+ sonetPathIntervalValidData TruthValue
+ }
+
+sonetPathIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the
+ interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently
+ completed 15 minute interval,
+ and the interval identified
+ by N is the interval immediately preceding the
+ one identified
+ by N-1."
+::= { sonetPathIntervalEntry 1 }
+
+sonetPathIntervalESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Errored Seconds encountered
+ by a SONET/SDH Path in a
+ particular 15-minute interval
+ in the past 24 hours."
+::= { sonetPathIntervalEntry 2 }
+
+sonetPathIntervalSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Seconds
+ encountered by a SONET/SDH Path in
+ a particular 15-minute interval
+ in the past 24 hours."
+::= { sonetPathIntervalEntry 3 }
+
+sonetPathIntervalCVs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Coding
+ Violations encountered by a
+ SONET/SDH Path in a particular 15-minute interval
+ in the past 24 hours."
+::= { sonetPathIntervalEntry 4 }
+
+sonetPathIntervalUASs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Unavailable Seconds
+ encountered by a Path in a
+ particular 15-minute interval
+ in the past 24 hours."
+::= { sonetPathIntervalEntry 5 }
+
+sonetPathIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this
+ interval is valid."
+ ::= { sonetPathIntervalEntry 6 }
+
+-- The SONET/SDH Far End Path group
+
+-- This group consists of two tables:
+-- - SONET/SDH Far End Path Current Table
+-- - SONET/SDH Far End Path Interval Table
+
+-- The SONET/SDH Far End Path Current Table
+
+-- The SONET/SDH Far End Path Current table
+-- contains various statistics
+-- being collected for the current 15 minute interval.
+-- The statistics are collected from
+-- the far end block error code
+-- (FEBE) within the G1 byte of the Path Overhead.
+-- The definitions are the same as described for
+-- the near-end information.
+
+sonetFarEndPathCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetFarEndPathCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Far End Path Current table."
+ ::= { sonetFarEndPath 1 }
+
+sonetFarEndPathCurrentEntry OBJECT-TYPE
+ SYNTAX SonetFarEndPathCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Far End Path Current table."
+ INDEX { ifIndex }
+ ::= { sonetFarEndPathCurrentTable 1 }
+
+SonetFarEndPathCurrentEntry ::=
+ SEQUENCE {
+ sonetFarEndPathCurrentESs PerfCurrentCount,
+ sonetFarEndPathCurrentSESs PerfCurrentCount,
+ sonetFarEndPathCurrentCVs PerfCurrentCount,
+ sonetFarEndPathCurrentUASs PerfCurrentCount
+ }
+
+sonetFarEndPathCurrentESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Far
+ End Errored Seconds encountered by a SONET/SDH
+ interface in the current 15 minute interval."
+ ::= { sonetFarEndPathCurrentEntry 1 }
+
+sonetFarEndPathCurrentSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Severely Errored Seconds
+ encountered by a SONET/SDH Path
+ interface in the current 15 minute
+ interval."
+ ::= { sonetFarEndPathCurrentEntry 2 }
+
+sonetFarEndPathCurrentCVs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Coding Violations reported via
+ the far end block error count
+ encountered by a
+ SONET/SDH Path interface in
+ the current 15 minute interval."
+ ::= { sonetFarEndPathCurrentEntry 3 }
+
+sonetFarEndPathCurrentUASs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Unavailable Seconds
+ encountered by a
+ SONET/SDH Path interface in
+ the current 15 minute interval."
+ ::= { sonetFarEndPathCurrentEntry 4 }
+
+
+-- The SONET/SDH Far End Path Interval Table
+
+-- The SONET/SDH Far End Path Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation. The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetFarEndPathIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetFarEndPathIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Far End Path Interval table."
+ ::= { sonetFarEndPath 2 }
+
+sonetFarEndPathIntervalEntry OBJECT-TYPE
+ SYNTAX SonetFarEndPathIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Far
+ End Path Interval table."
+ INDEX { ifIndex,
+ sonetFarEndPathIntervalNumber }
+ ::= { sonetFarEndPathIntervalTable 1 }
+
+SonetFarEndPathIntervalEntry ::=
+ SEQUENCE {
+ sonetFarEndPathIntervalNumber Integer32,
+ sonetFarEndPathIntervalESs PerfIntervalCount,
+ sonetFarEndPathIntervalSESs PerfIntervalCount,
+ sonetFarEndPathIntervalCVs PerfIntervalCount,
+ sonetFarEndPathIntervalUASs PerfIntervalCount,
+ sonetFarEndPathIntervalValidData TruthValue
+ }
+
+sonetFarEndPathIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the
+ interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently
+ completed 15 minute interval,
+ and the interval identified
+ by N is the interval immediately preceding the
+ one identified
+ by N-1."
+ ::= { sonetFarEndPathIntervalEntry 1 }
+
+sonetFarEndPathIntervalESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Errored Seconds encountered
+ by a SONET/SDH Path interface in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndPathIntervalEntry 2 }
+
+sonetFarEndPathIntervalSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Severely Errored Seconds
+ encountered by a SONET/SDH Path interface
+ in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndPathIntervalEntry 3 }
+
+sonetFarEndPathIntervalCVs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Coding Violations reported via
+ the far end block error count
+ encountered by a
+ SONET/SDH Path interface
+ in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndPathIntervalEntry 4 }
+
+sonetFarEndPathIntervalUASs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Unavailable Seconds
+ encountered by a
+ SONET/SDH Path interface in
+ a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndPathIntervalEntry 5 }
+
+sonetFarEndPathIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this
+ interval is valid."
+ ::= { sonetFarEndPathIntervalEntry 6 }
+
+-- the SONET/SDH Virtual Tributary group
+
+-- this group consists of 2 tables:
+-- - the SONET/SDH VT Current Table
+-- - the SONET/SDH VT Interval Table
+
+-- Corresponding SDH signals for SONET VTs are
+-- as follows:
+
+-- A VT1.5 = TU11
+-- A VT2 = TU12
+-- A VT3 = none
+-- none = TU3
+-- A VT6 = TU2
+
+-- the SONET/SDH VT Current Table
+
+-- The SONET/SDH VT current table
+-- contains various statistics
+-- being collected for the
+-- current 15 minute interval.
+
+sonetVTCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetVTCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH VT Current table."
+::= { sonetVT 1 }
+
+sonetVTCurrentEntry OBJECT-TYPE
+ SYNTAX SonetVTCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH VT Current table."
+ INDEX { ifIndex }
+::= { sonetVTCurrentTable 1 }
+
+SonetVTCurrentEntry ::=
+ SEQUENCE {
+ sonetVTCurrentWidth INTEGER,
+ sonetVTCurrentStatus Integer32,
+ sonetVTCurrentESs PerfCurrentCount,
+ sonetVTCurrentSESs PerfCurrentCount,
+ sonetVTCurrentCVs PerfCurrentCount,
+ sonetVTCurrentUASs PerfCurrentCount
+ }
+
+sonetVTCurrentWidth OBJECT-TYPE
+ SYNTAX INTEGER {
+ vtWidth15VC11(1),
+ vtWidth2VC12(2),
+ vtWidth3(3),
+ vtWidth6VC2(4),
+ vtWidth6c(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "A value that indicates the type of the SONET
+ VT and SDH VC. Assigned widths are
+ VT1.5/VC11, VT2/VC12, VT3, VT6/VC2, and VT6c."
+::= { sonetVTCurrentEntry 1 }
+
+sonetVTCurrentStatus OBJECT-TYPE
+ SYNTAX Integer32 (1..126)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the
+ status of the interface.
+ The sonetVTCurrentStatus
+ is a bit map represented
+ as a sum, therefore,
+ it can represent multiple defects
+ and failures
+ simultaneously.
+ The sonetVTNoDefect should be
+ set if and only if
+ no other flag is set.
+
+ The various bit positions are:
+ 1 sonetVTNoDefect
+ 2 sonetVTLOP
+ 4 sonetVTPathAIS
+ 8 sonetVTPathRDI
+ 16 sonetVTPathRFI
+ 32 sonetVTUnequipped
+ 64 sonetVTSignalLabelMismatch"
+::= { sonetVTCurrentEntry 2 }
+
+sonetVTCurrentESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Errored
+ Seconds encountered by a SONET/SDH
+ VT in the current 15 minute interval."
+::= { sonetVTCurrentEntry 3 }
+
+sonetVTCurrentSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Seconds
+ encountered by a SONET/SDH VT in the current 15 minute
+ interval."
+::= { sonetVTCurrentEntry 4 }
+
+sonetVTCurrentCVs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Coding
+ Violations encountered by a
+ SONET/SDH VT in the current 15 minute interval."
+::= { sonetVTCurrentEntry 5 }
+
+sonetVTCurrentUASs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Unavailable Seconds
+ encountered by a VT in the current
+ 15 minute interval."
+::= { sonetVTCurrentEntry 6 }
+
+-- the SONET/SDH VT Interval Table
+
+-- The SONET/SDH VT Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation. The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetVTIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetVTIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH VT Interval table."
+::= { sonetVT 2 }
+
+sonetVTIntervalEntry OBJECT-TYPE
+ SYNTAX SonetVTIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH VT Interval table."
+ INDEX { ifIndex,
+ sonetVTIntervalNumber }
+::= { sonetVTIntervalTable 1 }
+
+SonetVTIntervalEntry ::=
+ SEQUENCE {
+ sonetVTIntervalNumber Integer32,
+ sonetVTIntervalESs PerfIntervalCount,
+ sonetVTIntervalSESs PerfIntervalCount,
+ sonetVTIntervalCVs PerfIntervalCount,
+ sonetVTIntervalUASs PerfIntervalCount,
+ sonetVTIntervalValidData TruthValue
+ }
+
+sonetVTIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the
+ interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently
+ completed 15 minute interval,
+ and the interval identified
+ by N is the interval immediately preceding the
+ one identified
+ by N-1."
+::= { sonetVTIntervalEntry 1 }
+
+sonetVTIntervalESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Errored Seconds encountered
+ by a SONET/SDH VT in a particular 15-minute interval
+ in the past 24 hours."
+::= { sonetVTIntervalEntry 2 }
+
+sonetVTIntervalSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Severely Errored Seconds
+ encountered by a SONET/SDH VT
+ in a particular 15-minute interval
+ in the past 24 hours."
+::= { sonetVTIntervalEntry 3 }
+
+sonetVTIntervalCVs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Coding
+ Violations encountered by a
+ SONET/SDH VT in a particular 15-minute interval
+ in the past 24 hours."
+::= { sonetVTIntervalEntry 4 }
+
+sonetVTIntervalUASs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Unavailable Seconds
+ encountered by a VT in a particular 15-minute interval
+ in the past 24 hours."
+::= { sonetVTIntervalEntry 5 }
+
+sonetVTIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this
+ interval is valid."
+ ::= { sonetVTIntervalEntry 6 }
+
+-- The SONET/SDH Far End VT group
+
+-- This group consists of two tables:
+-- SONET/SDH Far End VT Current Table
+-- SONET/SDH Far End VT Interval Table
+
+-- The SONET/SDH Far End VT Current
+
+-- The SONET/SDH Far End VT Current table
+-- contains various statistics
+-- being collected for the current 15 minute interval.
+-- The statistics are collected from
+-- the far end block error code
+-- (FEBE) within the G1 byte of the VT Overhead.
+
+
+
+-- The definitions are the same as described for
+-- the near-end information.
+
+sonetFarEndVTCurrentTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetFarEndVTCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Far End VT Current table."
+ ::= { sonetFarEndVT 1 }
+
+sonetFarEndVTCurrentEntry OBJECT-TYPE
+ SYNTAX SonetFarEndVTCurrentEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Far End VT Current table."
+ INDEX { ifIndex }
+ ::= { sonetFarEndVTCurrentTable 1 }
+
+SonetFarEndVTCurrentEntry ::=
+ SEQUENCE {
+ sonetFarEndVTCurrentESs PerfCurrentCount,
+ sonetFarEndVTCurrentSESs PerfCurrentCount,
+ sonetFarEndVTCurrentCVs PerfCurrentCount,
+ sonetFarEndVTCurrentUASs PerfCurrentCount
+ }
+
+sonetFarEndVTCurrentESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of Far
+ End Errored Seconds encountered by a SONET/SDH
+ interface in the current 15 minute interval."
+::= { sonetFarEndVTCurrentEntry 1 }
+
+sonetFarEndVTCurrentSESs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Severely Errored Seconds
+ encountered by a SONET/SDH VT interface
+ in the current 15 minute
+ interval."
+ ::= { sonetFarEndVTCurrentEntry 2 }
+
+sonetFarEndVTCurrentCVs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Coding Violations reported via
+ the far end block error count
+ encountered by a
+ SONET/SDH VT interface
+ in the current 15 minute interval."
+ ::= { sonetFarEndVTCurrentEntry 3 }
+
+sonetFarEndVTCurrentUASs OBJECT-TYPE
+ SYNTAX PerfCurrentCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Unavailable Seconds
+ encountered by a
+ SONET/SDH VT interface
+ in the current 15 minute interval."
+ ::= { sonetFarEndVTCurrentEntry 4 }
+
+-- The SONET/SDH Far End VT Interval Table
+
+-- The SONET/SDH Far End VT Interval Table
+-- contains various statistics
+-- collected by each system over a maximum
+-- of the previous 24 hours of
+-- operation. The past 24 hours may be broken into 96
+-- completed 15 minute intervals.
+-- A system is required to store at
+-- least 4 completed 15 minute interval.
+-- The default value is 32 intervals.
+
+sonetFarEndVTIntervalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SonetFarEndVTIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The SONET/SDH Far End VT Interval table."
+ ::= { sonetFarEndVT 2 }
+
+sonetFarEndVTIntervalEntry OBJECT-TYPE
+ SYNTAX SonetFarEndVTIntervalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in the SONET/SDH Far
+ End VT Interval table."
+ INDEX { ifIndex,
+ sonetFarEndVTIntervalNumber }
+ ::= { sonetFarEndVTIntervalTable 1 }
+
+SonetFarEndVTIntervalEntry ::=
+ SEQUENCE {
+ sonetFarEndVTIntervalNumber Integer32,
+ sonetFarEndVTIntervalESs PerfIntervalCount,
+ sonetFarEndVTIntervalSESs PerfIntervalCount,
+ sonetFarEndVTIntervalCVs PerfIntervalCount,
+ sonetFarEndVTIntervalUASs PerfIntervalCount,
+ sonetFarEndVTIntervalValidData TruthValue
+ }
+
+sonetFarEndVTIntervalNumber OBJECT-TYPE
+ SYNTAX Integer32 (1..96)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A number between 1 and 96, which identifies the
+ interval for which the set of statistics is available.
+ The interval identified by 1 is the most recently
+ completed 15 minute interval,
+ and the interval identified
+ by N is the interval immediately preceding the
+ one identified
+ by N-1."
+ ::= { sonetFarEndVTIntervalEntry 1 }
+
+sonetFarEndVTIntervalESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Errored Seconds encountered
+ by a SONET/SDH VT interface
+ in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndVTIntervalEntry 2 }
+
+sonetFarEndVTIntervalSESs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Severely Errored Seconds
+ encountered by a SONET/SDH VT interface
+ in a particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndVTIntervalEntry 3 }
+
+sonetFarEndVTIntervalCVs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Coding Violations reported via
+ the far end block error count
+ encountered by a
+ SONET/SDH VT interface in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndVTIntervalEntry 4 }
+
+sonetFarEndVTIntervalUASs OBJECT-TYPE
+ SYNTAX PerfIntervalCount
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The counter associated with the number of
+ Far End Unavailable Seconds
+ encountered by a
+ SONET/SDH VT interface in a
+ particular 15-minute interval
+ in the past 24 hours."
+ ::= { sonetFarEndVTIntervalEntry 5 }
+
+sonetFarEndVTIntervalValidData OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This variable indicates if the data for this
+ interval is valid."
+ ::= { sonetFarEndVTIntervalEntry 6 }
+
+-- conformance information
+
+sonetConformance OBJECT IDENTIFIER ::= { sonetMIB 4 }
+
+sonetGroups OBJECT IDENTIFIER ::= { sonetConformance 1 }
+sonetCompliances OBJECT IDENTIFIER ::= { sonetConformance 2 }
+
+-- deprecated compliance statement
+
+sonetCompliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for SONET/SDH interfaces."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { sonetMediumStuff, sonetSectionStuff }
+
+ GROUP sonetLineStuff
+ DESCRIPTION
+ "Implementation of this group is mandatory for all
+ SONET/SDH systems that terminate SONET/SDH Lines,
+ Paths or Virtual Tributaries."
+
+ GROUP sonetFarEndLineStuff
+ DESCRIPTION
+ "Implementation of this group is optional for all
+ SONET/SDH systems that terminate SONET/SDH Lines,
+ Paths or Virtual Tributaries, and that
+ provide for a far end block error (FEBE)
+ information at the SONET/SDH Line Layer."
+
+ GROUP sonetPathStuff
+ DESCRIPTION
+ "Implementation of this group is mandatory for all
+ SONET/SDH systems that terminate SONET/SDH
+ Paths or Virtual Tributaries."
+
+ OBJECT sonetPathCurrentWidth
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ GROUP sonetFarEndPathStuff
+ DESCRIPTION
+ "Implementation of this group is optional for all
+ SONET/SDH systems that terminate SONET/SDH
+ Paths or Virtual Tributaries, and that process
+ Far End information."
+ GROUP sonetVTStuff
+ DESCRIPTION
+ "Implementation of this group is mandatory for all
+ SONET/SDH systems that terminate SONET/SDH Virtual
+ Tributaries."
+
+ OBJECT sonetVTCurrentWidth
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ GROUP sonetFarEndVTStuff
+ DESCRIPTION
+ "Implementation of this group is optional for all
+ SONET/SDH systems that terminate the SONET/SDH
+ floating Virtual Tributaries, and that process
+ Far End information."
+
+ ::= { sonetCompliances 1 }
+
+-- current compliance statements
+
+sonetCompliance2 MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SONET/SDH interfaces."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { sonetMediumStuff2, sonetSectionStuff2 }
+
+ OBJECT sonetMediumType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT sonetMediumLineCoding
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT sonetMediumLineType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT sonetMediumCircuitIdentifier
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT sonetMediumLoopbackConfig
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT sonetSESthresholdSet
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required, and only one
+ of the enumerated values need be supported."
+
+ GROUP sonetLineStuff2
+ DESCRIPTION
+ "Implementation of this group is mandatory for all
+ SONET/SDH systems that terminate SONET/SDH Lines,
+ Paths or Virtual Tributaries."
+
+ GROUP sonetFarEndLineStuff2
+ DESCRIPTION
+ "Implementation of this group is optional for all
+ SONET/SDH systems that terminate SONET/SDH Lines,
+ Paths or Virtual Tributaries, and that
+ provide for a far end block error (FEBE)
+ information at the SONET/SDH Line Layer."
+
+ GROUP sonetPathStuff2
+ DESCRIPTION
+ "Implementation of this group is mandatory for all
+ SONET/SDH systems that terminate SONET/SDH
+ Paths or Virtual Tributaries."
+
+ OBJECT sonetPathCurrentWidth
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ GROUP sonetFarEndPathStuff2
+ DESCRIPTION
+ "Implementation of this group is optional for all
+ SONET/SDH systems that terminate SONET/SDH
+ Paths or Virtual Tributaries, and that process
+ Far End information."
+
+ GROUP sonetVTStuff2
+ DESCRIPTION
+ "Implementation of this group is mandatory for all
+ SONET/SDH systems that terminate SONET/SDH Virtual
+ Tributaries."
+
+ OBJECT sonetVTCurrentWidth
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ GROUP sonetFarEndVTStuff2
+ DESCRIPTION
+ "Implementation of this group is optional for all
+ SONET/SDH systems that terminate the SONET/SDH
+ floating Virtual Tributaries, and that process
+ Far End information."
+
+ ::= { sonetCompliances 2 }
+
+-- units of conformance
+
+-- deprecated groups
+
+sonetMediumStuff OBJECT-GROUP
+ OBJECTS { sonetMediumType,
+ sonetMediumTimeElapsed,
+ sonetMediumValidIntervals,
+ sonetMediumLineCoding,
+ sonetMediumLineType,
+ sonetMediumCircuitIdentifier }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing configuration
+ information applicable to all SONET/SDH interfaces."
+ ::= { sonetGroups 1 }
+
+sonetSectionStuff OBJECT-GROUP
+ OBJECTS { sonetSectionCurrentStatus,
+ sonetSectionCurrentESs,
+ sonetSectionCurrentSESs,
+ sonetSectionCurrentSEFSs,
+ sonetSectionCurrentCVs,
+ sonetSectionIntervalESs,
+ sonetSectionIntervalSESs,
+ sonetSectionIntervalSEFSs,
+ sonetSectionIntervalCVs
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Section interfaces."
+ ::= { sonetGroups 2 }
+
+sonetLineStuff OBJECT-GROUP
+ OBJECTS { sonetLineCurrentStatus,
+ sonetLineCurrentESs,
+ sonetLineCurrentSESs,
+ sonetLineCurrentCVs,
+ sonetLineCurrentUASs,
+ sonetLineIntervalESs,
+ sonetLineIntervalSESs,
+ sonetLineIntervalCVs,
+ sonetLineIntervalUASs }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Line interfaces."
+ ::= { sonetGroups 3 }
+
+sonetFarEndLineStuff OBJECT-GROUP
+ OBJECTS { sonetFarEndLineCurrentESs,
+ sonetFarEndLineCurrentSESs,
+ sonetFarEndLineCurrentCVs,
+ sonetFarEndLineCurrentUASs,
+ sonetFarEndLineIntervalESs,
+ sonetFarEndLineIntervalSESs,
+ sonetFarEndLineIntervalCVs,
+ sonetFarEndLineIntervalUASs }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Line interfaces,
+ and maintaining Line Far End information."
+ ::= { sonetGroups 4 }
+
+sonetPathStuff OBJECT-GROUP
+ OBJECTS { sonetPathCurrentWidth,
+ sonetPathCurrentStatus,
+ sonetPathCurrentESs,
+ sonetPathCurrentSESs,
+ sonetPathCurrentCVs,
+ sonetPathCurrentUASs,
+ sonetPathIntervalESs,
+ sonetPathIntervalSESs,
+ sonetPathIntervalCVs,
+ sonetPathIntervalUASs }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Path interfaces."
+ ::= { sonetGroups 5 }
+
+sonetFarEndPathStuff OBJECT-GROUP
+ OBJECTS { sonetFarEndPathCurrentESs,
+ sonetFarEndPathCurrentSESs,
+ sonetFarEndPathCurrentCVs,
+ sonetFarEndPathCurrentUASs,
+ sonetFarEndPathIntervalESs,
+ sonetFarEndPathIntervalSESs,
+ sonetFarEndPathIntervalCVs,
+ sonetFarEndPathIntervalUASs }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Path interfaces,
+ and maintaining Path Far End information."
+ ::= { sonetGroups 6 }
+
+sonetVTStuff OBJECT-GROUP
+ OBJECTS { sonetVTCurrentWidth,
+ sonetVTCurrentStatus,
+ sonetVTCurrentESs,
+ sonetVTCurrentSESs,
+ sonetVTCurrentCVs,
+ sonetVTCurrentUASs,
+ sonetVTIntervalESs,
+ sonetVTIntervalSESs,
+ sonetVTIntervalCVs,
+ sonetVTIntervalUASs }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH VT interfaces."
+ ::= { sonetGroups 7 }
+
+sonetFarEndVTStuff OBJECT-GROUP
+ OBJECTS { sonetFarEndVTCurrentESs,
+ sonetFarEndVTCurrentSESs,
+ sonetFarEndVTCurrentCVs,
+ sonetFarEndVTCurrentUASs,
+ sonetFarEndVTIntervalESs,
+ sonetFarEndVTIntervalSESs,
+ sonetFarEndVTIntervalCVs,
+ sonetFarEndVTIntervalUASs }
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH VT interfaces,
+ and maintaining VT Far End information."
+ ::= { sonetGroups 8 }
+
+-- current groups
+
+sonetMediumStuff2 OBJECT-GROUP
+ OBJECTS { sonetMediumType,
+ sonetMediumTimeElapsed,
+ sonetMediumValidIntervals,
+ sonetMediumLineCoding,
+ sonetMediumLineType,
+ sonetMediumCircuitIdentifier,
+ sonetMediumInvalidIntervals,
+ sonetMediumLoopbackConfig,
+ sonetSESthresholdSet }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing configuration
+ information applicable to all SONET/SDH interfaces."
+ ::= { sonetGroups 9 }
+
+sonetSectionStuff2 OBJECT-GROUP
+ OBJECTS { sonetSectionCurrentStatus,
+ sonetSectionCurrentESs,
+ sonetSectionCurrentSESs,
+ sonetSectionCurrentSEFSs,
+ sonetSectionCurrentCVs,
+ sonetSectionIntervalESs,
+ sonetSectionIntervalSESs,
+ sonetSectionIntervalSEFSs,
+ sonetSectionIntervalCVs,
+ sonetSectionIntervalValidData }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Section interfaces."
+ ::= { sonetGroups 10 }
+
+sonetLineStuff2 OBJECT-GROUP
+ OBJECTS { sonetLineCurrentStatus,
+ sonetLineCurrentESs,
+ sonetLineCurrentSESs,
+ sonetLineCurrentCVs,
+ sonetLineCurrentUASs,
+ sonetLineIntervalESs,
+ sonetLineIntervalSESs,
+ sonetLineIntervalCVs,
+ sonetLineIntervalUASs,
+ sonetLineIntervalValidData }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Line interfaces."
+ ::= { sonetGroups 11 }
+
+sonetPathStuff2 OBJECT-GROUP
+ OBJECTS { sonetPathCurrentWidth,
+ sonetPathCurrentStatus,
+ sonetPathCurrentESs,
+ sonetPathCurrentSESs,
+ sonetPathCurrentCVs,
+ sonetPathCurrentUASs,
+ sonetPathIntervalESs,
+ sonetPathIntervalSESs,
+ sonetPathIntervalCVs,
+ sonetPathIntervalUASs,
+ sonetPathIntervalValidData }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Path interfaces."
+ ::= { sonetGroups 12 }
+
+sonetVTStuff2 OBJECT-GROUP
+ OBJECTS { sonetVTCurrentWidth,
+ sonetVTCurrentStatus,
+ sonetVTCurrentESs,
+ sonetVTCurrentSESs,
+ sonetVTCurrentCVs,
+ sonetVTCurrentUASs,
+ sonetVTIntervalESs,
+ sonetVTIntervalSESs,
+ sonetVTIntervalCVs,
+ sonetVTIntervalUASs,
+ sonetVTIntervalValidData }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH VT interfaces."
+ ::= { sonetGroups 13 }
+
+sonetFarEndLineStuff2 OBJECT-GROUP
+ OBJECTS { sonetFarEndLineCurrentESs,
+ sonetFarEndLineCurrentSESs,
+ sonetFarEndLineCurrentCVs,
+ sonetFarEndLineCurrentUASs,
+ sonetFarEndLineIntervalESs,
+ sonetFarEndLineIntervalSESs,
+ sonetFarEndLineIntervalCVs,
+ sonetFarEndLineIntervalUASs,
+ sonetFarEndLineIntervalValidData }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Line interfaces,
+ and maintaining Line Far End information."
+ ::= { sonetGroups 14 }
+
+sonetFarEndPathStuff2 OBJECT-GROUP
+ OBJECTS { sonetFarEndPathCurrentESs,
+ sonetFarEndPathCurrentSESs,
+ sonetFarEndPathCurrentCVs,
+ sonetFarEndPathCurrentUASs,
+ sonetFarEndPathIntervalESs,
+ sonetFarEndPathIntervalSESs,
+ sonetFarEndPathIntervalCVs,
+ sonetFarEndPathIntervalUASs,
+ sonetFarEndPathIntervalValidData }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH Path interfaces,
+ and maintaining Path Far End information."
+ ::= { sonetGroups 15 }
+
+sonetFarEndVTStuff2 OBJECT-GROUP
+ OBJECTS { sonetFarEndVTCurrentESs,
+ sonetFarEndVTCurrentSESs,
+ sonetFarEndVTCurrentCVs,
+ sonetFarEndVTCurrentUASs,
+ sonetFarEndVTIntervalESs,
+ sonetFarEndVTIntervalSESs,
+ sonetFarEndVTIntervalCVs,
+ sonetFarEndVTIntervalUASs,
+ sonetFarEndVTIntervalValidData }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing information
+ specific to SONET/SDH VT interfaces,
+ and maintaining VT Far End information."
+ ::= { sonetGroups 16 }
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 11:29:20 +0000