diff options
Diffstat (limited to 'MIBS/accedian/ACD-SA-MIB')
| -rw-r--r-- | MIBS/accedian/ACD-SA-MIB | 1165 |
1 files changed, 1165 insertions, 0 deletions
diff --git a/MIBS/accedian/ACD-SA-MIB b/MIBS/accedian/ACD-SA-MIB new file mode 100644 index 0000000..f2172af --- /dev/null +++ b/MIBS/accedian/ACD-SA-MIB @@ -0,0 +1,1165 @@ +-- +-- Accedian Enterprise Specific MIB +-- +-- Copyright (c) 2005-2011, Accedian Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + + +ACD-SA-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Unsigned32, Gauge32 + FROM SNMPv2-SMI + DisplayString, DateAndTime, TEXTUAL-CONVENTION, RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + + acdMibs + FROM ACCEDIAN-SMI; + +acdSa MODULE-IDENTITY + + LAST-UPDATED "201112210100Z" + ORGANIZATION "Accedian Networks, Inc." + CONTACT-INFO + "Accedian Technical Assistance Center + Accedian Networks, Inc. + 4878 Levy, suite 202 + Saint-Laurent, Quebec Canada H4R 2P1 + E-mail: support@accedian.com" + DESCRIPTION + "The Service Availability database for this Accedian Networks device." + + REVISION "201112210100Z" -- 21 Dec 2011 + DESCRIPTION + "Add support for ETH-SLM metrics." + + + REVISION "201103150100Z" -- 15 Mars 2011 + DESCRIPTION + "Initial version of MIB module ACD-SA-MIB." + + ::= { acdMibs 12 } + +acdSaNotifications OBJECT IDENTIFIER ::= { acdSa 0 } +acdSaMIBObjects OBJECT IDENTIFIER ::= { acdSa 1 } +acdSaConformance OBJECT IDENTIFIER ::= { acdSa 2 } + +acdSaConfig OBJECT IDENTIFIER ::= { acdSaMIBObjects 1 } +acdSaCounter OBJECT IDENTIFIER ::= { acdSaMIBObjects 2 } +acdSaStatus OBJECT IDENTIFIER ::= { acdSaMIBObjects 3 } + +--------------------------------------------------------------------------- +-- Textual conventions +--------------------------------------------------------------------------- + +AcdSaMetricType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value that represents a type of metric that can be used in an + instance of Service Availability." + SYNTAX INTEGER { + metricPaaPlr(1), + metricPaaOwDelay(2), + metricPaaOwDv(3), + metricPaaTwDelay(4), + metricPaaTwDv(5), + metricCfmPlr(6), + metricCfmOwDelay(7), + metricCfmOwDv(8), + metricCfmTwDelay(9), + metricCfmTwDv(10), + metricCfmSlmNearEndPlr(11), + metricCfmSlmFarEndPlr(12) + } + +AcdSaValidFlag ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The validity flag can have three values: valid, adjusted, or pending. + The value of valid indicates the metrics are calculated normally. + The value of adjusted is used to indicate a change occurred in the + configuration during the reporting period which may impact the service + availability calculation. + The value of pending indicates that the counters were reset in the + middle of a time interval." + SYNTAX INTEGER { + valid(1), + adjusted(2), + pending(3) + } + +AcdSaAdminStateFlag ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This flag is used for the administrative state. + The value IS indicates the state is In-Service. The value OOS + indicates the state is Out-of-Service." + SYNTAX INTEGER { + is(1), + oos(2) + } + +AcdSaOperStateFlag ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This flag is used for the operational state. + The value IS indicates the state is In-Service. The value OOS + indicates the state is Out-of-Service. The value oos-au indicates + the state is Out-of-Service-Autonomous. This state is entered when + all of the metrics associated with the service instance are disabled." + SYNTAX INTEGER { + is(1), + oos(2), + oosAu(3) + } + +--------------------------------------------------------------------------- + -- The Service configuration table + -- This table contains all Service entry configurations. +--------------------------------------------------------------------------- + +acdSaServiceConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaServiceConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all instance of service availability of this unit." + ::= { acdSaConfig 1 } + +acdSaServiceConfigEntry OBJECT-TYPE + SYNTAX AcdSaServiceConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all settings for a Service." + INDEX { acdSaServiceIndex } + ::= { acdSaServiceConfigTable 1 } + +AcdSaServiceConfigEntry ::= SEQUENCE { + acdSaServiceIndex Unsigned32, + acdSaServiceConfigRowStatus RowStatus, + acdSaServiceConfigName DisplayString, + acdSaServiceConfigAdminState AcdSaAdminStateFlag, + acdSaServiceConfigReportingPeriod Unsigned32, + acdSaServiceConfigUaWindowSize Unsigned32, + acdSaServiceConfigHliWindowSize Unsigned32, + acdSaServiceConfigTimeInterval Unsigned32 +} + +acdSaServiceIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each service instance." + ::= { acdSaServiceConfigEntry 1 } + +acdSaServiceConfigRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "All columns must have a valid value before a row can be activated. To + create a new Service you shall provide a unique name for an empty + row with the RowStatus set to Create and Go." + ::= { acdSaServiceConfigEntry 2 } + +acdSaServiceConfigName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A unique name used to identify the Service." + ::= { acdSaServiceConfigEntry 3 } + +acdSaServiceConfigAdminState OBJECT-TYPE + SYNTAX AcdSaAdminStateFlag + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Administrative state is(1) or oos(2)." + DEFVAL { 2 } + ::= { acdSaServiceConfigEntry 4 } + +acdSaServiceConfigReportingPeriod OBJECT-TYPE + SYNTAX Unsigned32 (1 .. 1440) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A reporting period over which availability counters are evaluated + in addition to the monotonic counters (In minutes)." + DEFVAL { 15 } + ::= { acdSaServiceConfigEntry 5 } + +acdSaServiceConfigUaWindowSize OBJECT-TYPE + SYNTAX Unsigned32 (1 .. 1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of consecutive seconds over which to assess unavailability." + DEFVAL { 10 } + ::= { acdSaServiceConfigEntry 6 } + +acdSaServiceConfigHliWindowSize OBJECT-TYPE + SYNTAX Unsigned32 (1 .. 999) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of consecutive Time Intervals used to assess High Loss Intervals for this instance." + DEFVAL { 3 } + ::= { acdSaServiceConfigEntry 7 } + +acdSaServiceConfigTimeInterval OBJECT-TYPE + SYNTAX Unsigned32 (1 .. 60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The interval of time during which the metric is evaluated. Allowed values + are 1, 5, 10, 20, or 60." + DEFVAL { 1 } + ::= { acdSaServiceConfigEntry 8 } + + +--------------------------------------------------------------------------- + -- The Metric configuration table + -- This table contains all Metric entry configurations. +--------------------------------------------------------------------------- + +acdSaMetricConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaMetricConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ....." + ::= { acdSaConfig 2 } + +acdSaMetricConfigEntry OBJECT-TYPE + SYNTAX AcdSaMetricConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all settings for a Metric." + INDEX { acdSaServiceIndex, + acdSaMetricIndex } + ::= { acdSaMetricConfigTable 1 } + +AcdSaMetricConfigEntry ::= SEQUENCE { + acdSaMetricIndex Unsigned32, + acdSaMetricConfigRowStatus RowStatus, + acdSaMetricConfigName DisplayString, + acdSaMetricConfigSrcName DisplayString, + acdSaMetricConfigType AcdSaMetricType, + acdSaMetricConfigThreshold Unsigned32 +} + +acdSaMetricIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index for each metric instance." + ::= { acdSaMetricConfigEntry 1 } + +acdSaMetricConfigRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "All columns must have a valid value before a row can be activated. To + create a new Service you shall provide the a unique name for an empty + row with the RowStatus set to Create and Go. To delete the VLAN set + you need to set the RowStatus to destroy." + ::= { acdSaMetricConfigEntry 2 } + +acdSaMetricConfigName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A unique name used to identify the Metric." + ::= { acdSaMetricConfigEntry 3 } + +acdSaMetricConfigSrcName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A unique name used to identify the source metric." + ::= { acdSaMetricConfigEntry 4 } + +acdSaMetricConfigType OBJECT-TYPE + SYNTAX AcdSaMetricType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable the Service Availability entry." + DEFVAL { metricCfmTwDelay } + ::= { acdSaMetricConfigEntry 5 } + +acdSaMetricConfigThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the delay threshold for this metric when type is + one of metric delay parameters (in micro-seconds). Indicates + the packet loss threshold for this metric when type is one of + packet-loss parameter expressed in millionth of percent + (1,000,000 is 1%)." + DEFVAL { 0 } + ::= { acdSaMetricConfigEntry 6 } + + +--------------------------------------------------------------------------- + -- The Service counters table + -- This table contains all services history counters. +--------------------------------------------------------------------------- + +acdSaServiceCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaServiceCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all instance of service availability of this unit." + ::= { acdSaCounter 1 } + +acdSaServiceCounterEntry OBJECT-TYPE + SYNTAX AcdSaServiceCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all counters for a Service." + INDEX { acdSaServiceIndex } + ::= { acdSaServiceCounterTable 1 } + +AcdSaServiceCounterEntry ::= SEQUENCE { + acdSaServiceCounterPeriodIndex Unsigned32, + acdSaServiceCounterValidFlag AcdSaValidFlag, + acdSaServiceCounterUpTime Unsigned32, + acdSaServiceCounterUaTime Unsigned32, + acdSaServiceCounterMaintTime Unsigned32, + acdSaServiceCounterAvailRatio Unsigned32, + acdSaServiceCounterGaps Unsigned32, + acdSaServiceCounterLargestGap Unsigned32, + acdSaServiceCounterChliTime Unsigned32, + acdSaServiceCounterChliRatio Unsigned32 +} + +acdSaServiceCounterPeriodIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies the particular sample this entry + represents among all samples associated with the same service + instance. This index starts at 1 and increases by one as each new + period." + ::= { acdSaServiceCounterEntry 1 } + +acdSaServiceCounterValidFlag OBJECT-TYPE + SYNTAX AcdSaValidFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the validity of the service counter during this sampling + interval." + ::= { acdSaServiceCounterEntry 2 } + + +acdSaServiceCounterUpTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uptime is a measure of the time a service has been up during this + sampling interval." + ::= { acdSaServiceCounterEntry 3 } + +acdSaServiceCounterUaTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UaTime is a measure of the time a service has been unavailable + during this sampling interval." + ::= { acdSaServiceCounterEntry 4 } + +acdSaServiceCounterMaintTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MaintTime is a measure of the time a service has been in maintenance + during this sampling interval." + ::= { acdSaServiceCounterEntry 5 } + +acdSaServiceCounterAvailRatio OBJECT-TYPE + SYNTAX Unsigned32 (0..100000000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the availability ratio in millionth of a percent + (1,000,000 is 1%)." + ::= { acdSaServiceCounterEntry 6 } + + +acdSaServiceCounterGaps OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The gap shall be the number of time the state change from available + to unavailable." + ::= { acdSaServiceCounterEntry 7 } + +acdSaServiceCounterLargestGap OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest gap shall be the largest number of consecutive unavailable + second." + ::= { acdSaServiceCounterEntry 8 } + +acdSaServiceCounterChliTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The CHLI time is a counter which increments for every high loss interval. + It is only reset to zero when one of the following conditions occur: + 1) device reboot 2) explicit counter reset." + ::= { acdSaServiceCounterEntry 9 } + +acdSaServiceCounterChliRatio OBJECT-TYPE + SYNTAX Unsigned32 (0..100000000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ratio of high loss intervals divided by the uptime minus the sum of + maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%)." + ::= { acdSaServiceCounterEntry 10 } + + +--------------------------------------------------------------------------- + -- The Service History counters table + -- This table contains all services history counters. +--------------------------------------------------------------------------- + +acdSaServiceHistCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaServiceHistCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all instance of service availability of this unit." + ::= { acdSaCounter 2 } + +acdSaServiceHistCounterEntry OBJECT-TYPE + SYNTAX AcdSaServiceHistCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all counters for a Service." + INDEX { acdSaServiceIndex, + acdSaServiceHistCounterPeriodIndex } + ::= { acdSaServiceHistCounterTable 1 } + +AcdSaServiceHistCounterEntry ::= SEQUENCE { + acdSaServiceHistCounterPeriodIndex Unsigned32, + acdSaServiceHistCounterIntervalEnd DateAndTime, + acdSaServiceHistCounterValidFlag AcdSaValidFlag, + acdSaServiceHistCounterUpTime Unsigned32, + acdSaServiceHistCounterUaTime Unsigned32, + acdSaServiceHistCounterMaintTime Unsigned32, + acdSaServiceHistCounterAvailRatio Unsigned32, + acdSaServiceHistCounterGaps Unsigned32, + acdSaServiceHistCounterLargestGap Unsigned32, + acdSaServiceHistCounterChliTime Unsigned32, + acdSaServiceHistCounterChliRatio Unsigned32 +} + +acdSaServiceHistCounterPeriodIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index that uniquely identifies the particular sample this entry + represents among all samples associated with the same service + instance. This index starts at 1 and increases by one as each new + period." + ::= { acdSaServiceHistCounterEntry 1 } + + +acdSaServiceHistCounterIntervalEnd OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the time of the end of this entry." + ::= { acdSaServiceHistCounterEntry 2 } + + +acdSaServiceHistCounterValidFlag OBJECT-TYPE + SYNTAX AcdSaValidFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the validity of the service counter during this sampling + interval." + ::= { acdSaServiceHistCounterEntry 3 } + + +acdSaServiceHistCounterUpTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uptime is a measure of the time a service has been up during this + sampling interval." + ::= { acdSaServiceHistCounterEntry 4 } + +acdSaServiceHistCounterUaTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UaTime is a measure of the time a service has been unavailable + during this sampling interval." + ::= { acdSaServiceHistCounterEntry 5 } + +acdSaServiceHistCounterMaintTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MaintTime is a measure of the time a service has been in maintenance + during this sampling interval." + ::= { acdSaServiceHistCounterEntry 6 } + +acdSaServiceHistCounterAvailRatio OBJECT-TYPE + SYNTAX Unsigned32 (0..100000000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the availability ratio in millionth of a percent + (1,000,000 is 1%)." + ::= { acdSaServiceHistCounterEntry 7 } + + +acdSaServiceHistCounterGaps OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The gap shall be the number of time the state change from available + to unavailable." + ::= { acdSaServiceHistCounterEntry 8 } + +acdSaServiceHistCounterLargestGap OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest gap shall be the largest number of consecutive unavailable + second." + ::= { acdSaServiceHistCounterEntry 9 } + +acdSaServiceHistCounterChliTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The CHLI time is a counter which increments for every High Loss Interval. + It is only reset to zero when one of the following conditions occur: + 1) device reboot 2) explicit counter reset." + ::= { acdSaServiceHistCounterEntry 10 } + +acdSaServiceHistCounterChliRatio OBJECT-TYPE + SYNTAX Unsigned32 (0..100000000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ratio of high loss intervals divided by the uptime minus the sum of + maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%)." + ::= { acdSaServiceHistCounterEntry 11 } + +--------------------------------------------------------------------------- + -- The Monotonic Service counters table + -- This table contains all services monotonic counters. +--------------------------------------------------------------------------- + +acdSaServiceMonoCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaServiceMonoCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all instance of service availability of this unit." + ::= { acdSaCounter 3 } + +acdSaServiceMonoCounterEntry OBJECT-TYPE + SYNTAX AcdSaServiceMonoCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all monotonic counters for a Service." + INDEX { acdSaServiceIndex } + ::= { acdSaServiceMonoCounterTable 1 } + +AcdSaServiceMonoCounterEntry ::= SEQUENCE { + acdSaServiceMonoCounterValidFlag AcdSaValidFlag, + acdSaServiceMonoCounterUpTime Unsigned32, + acdSaServiceMonoCounterUaTime Unsigned32, + acdSaServiceMonoCounterMaintTime Unsigned32, + acdSaServiceMonoCounterAvailRatio Unsigned32, + acdSaServiceMonoCounterGaps Unsigned32, + acdSaServiceMonoCounterLargestGap Unsigned32, + acdSaServiceMonoCounterChliTime Unsigned32, + acdSaServiceMonoCounterChliRatio Unsigned32 +} + +acdSaServiceMonoCounterValidFlag OBJECT-TYPE + SYNTAX AcdSaValidFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the validity of the service counter during this sampling + interval." + ::= { acdSaServiceMonoCounterEntry 1 } + + +acdSaServiceMonoCounterUpTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uptime is a measure of the time a service has been up during this + sampling interval." + ::= { acdSaServiceMonoCounterEntry 2 } + +acdSaServiceMonoCounterUaTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UaTime is a measure of the time a service has been unavailable + during this sampling interval." + ::= { acdSaServiceMonoCounterEntry 3 } + +acdSaServiceMonoCounterMaintTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MaintTime is a measure of the time a service has been in maintenance + during this sampling interval." + ::= { acdSaServiceMonoCounterEntry 4 } + +acdSaServiceMonoCounterAvailRatio OBJECT-TYPE + SYNTAX Unsigned32 (0..100000000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the availability ratio in millionth of a percent + (1,000,000 is 1%)." + ::= { acdSaServiceMonoCounterEntry 5 } + + +acdSaServiceMonoCounterGaps OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The gap shall be the number of time the state change from available + to unavailable." + ::= { acdSaServiceMonoCounterEntry 6 } + +acdSaServiceMonoCounterLargestGap OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The largest gap shall be the largest number of consecutive unavailable + second." + ::= { acdSaServiceMonoCounterEntry 7 } + +acdSaServiceMonoCounterChliTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A counter which increments for every high loss interval. + It is only reset to zero when one of the following conditions occur: + 1) device reboot 2) explicit counter reset." + ::= { acdSaServiceMonoCounterEntry 8 } + +acdSaServiceMonoCounterChliRatio OBJECT-TYPE + SYNTAX Unsigned32 (0..100000000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, + expressed in millionth of a percent (1,000,000 is 1%)." + ::= { acdSaServiceMonoCounterEntry 9 } + + +--------------------------------------------------------------------------- + -- The Metric counters table + -- This table contains all metrics history counters. +--------------------------------------------------------------------------- + +acdSaMetricCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaMetricCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all instance of service availability of this unit." + ::= { acdSaCounter 4 } + +acdSaMetricCounterEntry OBJECT-TYPE + SYNTAX AcdSaMetricCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all counters for a Metric." + INDEX { acdSaServiceIndex, + acdSaMetricIndex } + ::= { acdSaMetricCounterTable 1 } + +AcdSaMetricCounterEntry ::= SEQUENCE { + acdSaMetricCounterValidFlag AcdSaValidFlag, + acdSaMetricCounterUaTime Unsigned32, + acdSaMetricCounterChliTime Unsigned32 +} + +acdSaMetricCounterValidFlag OBJECT-TYPE + SYNTAX AcdSaValidFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the validity of the metric counter during this sampling + interval." + ::= { acdSaMetricCounterEntry 1 } + + +acdSaMetricCounterUaTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UaTime is a measure of the time a metric has been unavailable + during this sampling interval." + ::= { acdSaMetricCounterEntry 2 } + +acdSaMetricCounterChliTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: + 1) device reboot 2) explicit counter reset." + ::= { acdSaMetricCounterEntry 3 } + + +--------------------------------------------------------------------------- + -- The Metric History counters table + -- This table contains all metrics history counters. +--------------------------------------------------------------------------- + +acdSaMetricHistCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaMetricHistCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all instance of service availability of this unit." + ::= { acdSaCounter 5 } + +acdSaMetricHistCounterEntry OBJECT-TYPE + SYNTAX AcdSaMetricHistCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all counters for a Metric." + INDEX { acdSaMetricHistCounterID, + acdSaMetricHistCounterPeriodIndex } + ::= { acdSaMetricHistCounterTable 1 } + +AcdSaMetricHistCounterEntry ::= SEQUENCE { + acdSaMetricHistCounterID Unsigned32, + acdSaMetricHistCounterPeriodIndex Unsigned32, + acdSaMetricHistCounterIntervalEnd DateAndTime, + acdSaMetricHistCounterValidFlag AcdSaValidFlag, + acdSaMetricHistCounterUaTime Unsigned32, + acdSaMetricHistCounterChliTime Unsigned32 +} + +acdSaMetricHistCounterID OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each Metric instance. This value follows the + ordering of the service table." + ::= { acdSaMetricHistCounterEntry 1 } + +acdSaMetricHistCounterPeriodIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index that uniquely identifies the particular sample this entry + represents among all samples associated with the same service + instance. This index starts at 1 and increases by one as each new + period." + ::= { acdSaMetricHistCounterEntry 2 } + + +acdSaMetricHistCounterIntervalEnd OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the time of the end of this entry." + ::= { acdSaMetricHistCounterEntry 3 } + + +acdSaMetricHistCounterValidFlag OBJECT-TYPE + SYNTAX AcdSaValidFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the validity of the metric counter during this sampling + interval." + ::= { acdSaMetricHistCounterEntry 4 } + + +acdSaMetricHistCounterUaTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UaTime is a measure of the time a metric has been unavailable + during this sampling interval." + ::= { acdSaMetricHistCounterEntry 5 } + +acdSaMetricHistCounterChliTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: + 1) device reboot 2) explicit counter reset." + ::= { acdSaMetricHistCounterEntry 6 } + +--------------------------------------------------------------------------- + -- The Metric counters table + -- This table contains all metrics history counters. +--------------------------------------------------------------------------- + +acdSaMetricMonoCounterTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaMetricMonoCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all instance of service availability of this unit." + ::= { acdSaCounter 6 } + +acdSaMetricMonoCounterEntry OBJECT-TYPE + SYNTAX AcdSaMetricMonoCounterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all counters for a Metric." + INDEX { acdSaServiceIndex, + acdSaMetricIndex } + ::= { acdSaMetricMonoCounterTable 1 } + +AcdSaMetricMonoCounterEntry ::= SEQUENCE { + acdSaMetricMonoCounterValidFlag AcdSaValidFlag, + acdSaMetricMonoCounterUaTime Unsigned32, + acdSaMetricMonoCounterChliTime Unsigned32 +} + +acdSaMetricMonoCounterValidFlag OBJECT-TYPE + SYNTAX AcdSaValidFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the validity of the metric counter during this sampling + interval." + ::= { acdSaMetricMonoCounterEntry 1 } + + +acdSaMetricMonoCounterUaTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The UaTime is a measure of the time a metric has been unavailable + during this sampling interval." + ::= { acdSaMetricMonoCounterEntry 2 } + +acdSaMetricMonoCounterChliTime OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: + 1) device reboot 2) explicit counter reset." + ::= { acdSaMetricMonoCounterEntry 3 } + + + +--------------------------------------------------------------------------- + -- The Service status table + -- This table contains all Service entry status. +--------------------------------------------------------------------------- + +acdSaServiceStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSaServiceStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all instance of service availability of this unit." + ::= { acdSaStatus 1 } + +acdSaServiceStatusEntry OBJECT-TYPE + SYNTAX AcdSaServiceStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all status for a Service." + INDEX { acdSaServiceStatusID } + ::= { acdSaServiceStatusTable 1 } + +AcdSaServiceStatusEntry ::= SEQUENCE { + acdSaServiceStatusID Unsigned32, + acdSaServiceStatusName DisplayString, + acdSaServiceStatusAdminState AcdSaAdminStateFlag, + acdSaServiceStatusOperState AcdSaOperStateFlag, + acdSaServiceStatusNbrMetrics Gauge32 +} + +acdSaServiceStatusID OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each service instance." + ::= { acdSaServiceStatusEntry 1 } + +acdSaServiceStatusName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique name used to identify the Service." + ::= { acdSaServiceStatusEntry 2 } + +acdSaServiceStatusAdminState OBJECT-TYPE + SYNTAX AcdSaAdminStateFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Administrative state is one of is(1) or oos(2)." + DEFVAL { 2 } + ::= { acdSaServiceStatusEntry 3 } + +acdSaServiceStatusOperState OBJECT-TYPE + SYNTAX AcdSaOperStateFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Operational state is one of is(1), oos(2) or oosAu (3)." + DEFVAL { 2 } + ::= { acdSaServiceStatusEntry 4 } + +acdSaServiceStatusNbrMetrics OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of metrics associated with this Service instance." + DEFVAL { 0 } + ::= { acdSaServiceStatusEntry 5 } + + + + + +--------------------------------------------------------------------------- + -- ACD-SA-MIB Module - Conformance Information +--------------------------------------------------------------------------- + +acdSaCompliances OBJECT IDENTIFIER ::= { acdSaConformance 1 } +acdSaGroups OBJECT IDENTIFIER ::= { acdSaConformance 2 } + +--------------------------------------------------------------------------- + -- Units of conformance +--------------------------------------------------------------------------- + +acdSaServiceConfigGroup OBJECT-GROUP + OBJECTS { + acdSaServiceConfigRowStatus, + acdSaServiceConfigName, + acdSaServiceConfigAdminState, + acdSaServiceConfigReportingPeriod, + acdSaServiceConfigUaWindowSize, + acdSaServiceConfigHliWindowSize, + acdSaServiceConfigTimeInterval + } + STATUS current + DESCRIPTION + "Objects for the Service configuration Group." + ::= { acdSaGroups 1 } + +acdSaMetricConfigGroup OBJECT-GROUP + OBJECTS { + acdSaMetricConfigRowStatus, + acdSaMetricConfigName, + acdSaMetricConfigSrcName, + acdSaMetricConfigType, + acdSaMetricConfigThreshold + } + STATUS current + DESCRIPTION + "Objects for the Metric configuration Group." + ::= { acdSaGroups 2 } + +acdSaServiceCounterGroup OBJECT-GROUP + OBJECTS { + acdSaServiceCounterPeriodIndex, + acdSaServiceCounterValidFlag, + acdSaServiceCounterUpTime, + acdSaServiceCounterUaTime, + acdSaServiceCounterMaintTime, + acdSaServiceCounterAvailRatio, + acdSaServiceCounterGaps, + acdSaServiceCounterLargestGap, + acdSaServiceCounterChliTime, + acdSaServiceCounterChliRatio + } + STATUS current + DESCRIPTION + "Objects for the Service Counter Group." + ::= { acdSaGroups 3 } + +acdSaServiceHistCounterGroup OBJECT-GROUP + OBJECTS { + + acdSaServiceHistCounterIntervalEnd, + acdSaServiceHistCounterValidFlag, + acdSaServiceHistCounterUpTime, + acdSaServiceHistCounterUaTime, + acdSaServiceHistCounterMaintTime, + acdSaServiceHistCounterAvailRatio, + acdSaServiceHistCounterGaps, + acdSaServiceHistCounterLargestGap, + acdSaServiceHistCounterChliTime, + acdSaServiceHistCounterChliRatio + } + STATUS current + DESCRIPTION + "Objects for the Service History Counter Group." + ::= { acdSaGroups 4 } + +acdSaServiceMonoCounterGroup OBJECT-GROUP + OBJECTS { + acdSaServiceMonoCounterValidFlag, + acdSaServiceMonoCounterUpTime, + acdSaServiceMonoCounterUaTime, + acdSaServiceMonoCounterMaintTime, + acdSaServiceMonoCounterAvailRatio, + acdSaServiceMonoCounterGaps, + acdSaServiceMonoCounterLargestGap, + acdSaServiceMonoCounterChliTime, + acdSaServiceMonoCounterChliRatio + } + STATUS current + DESCRIPTION + "Objects for the Service Monotonic Counter Group." + ::= { acdSaGroups 5 } + +acdSaMetricCounterGroup OBJECT-GROUP + OBJECTS { + acdSaMetricCounterValidFlag, + acdSaMetricCounterUaTime, + acdSaMetricCounterChliTime + } + STATUS current + DESCRIPTION + "Objects for the Metric Counter Group." + ::= { acdSaGroups 6 } + +acdSaMetricHistCounterGroup OBJECT-GROUP + OBJECTS { + + acdSaMetricHistCounterIntervalEnd, + acdSaMetricHistCounterValidFlag, + acdSaMetricHistCounterUaTime, + acdSaMetricHistCounterChliTime + } + STATUS current + DESCRIPTION + "Objects for the Metric History Counter Group." + ::= { acdSaGroups 7 } + +acdSaMetricMonoCounterGroup OBJECT-GROUP + OBJECTS { + acdSaMetricMonoCounterValidFlag, + acdSaMetricMonoCounterUaTime, + acdSaMetricMonoCounterChliTime + } + STATUS current + DESCRIPTION + "Objects for the Metric History Counter Group." + ::= { acdSaGroups 8 } + +acdSaServiceStatusGroup OBJECT-GROUP + OBJECTS { + acdSaServiceStatusName, + acdSaServiceStatusAdminState, + acdSaServiceStatusOperState, + acdSaServiceStatusNbrMetrics + } + STATUS current + DESCRIPTION + "Objects for the Service Status Group." + ::= { acdSaGroups 9 } + + +acdSaCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for support of the ACD-SA-MIB module." + MODULE + MANDATORY-GROUPS { + acdSaServiceConfigGroup, + acdSaMetricConfigGroup, + acdSaServiceCounterGroup, + acdSaServiceHistCounterGroup, + acdSaServiceMonoCounterGroup, + acdSaMetricCounterGroup, + acdSaMetricHistCounterGroup, + acdSaMetricMonoCounterGroup, + acdSaServiceStatusGroup + } + + OBJECT acdSaServiceConfigRowStatus + SYNTAX RowStatus { active(1) } + WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } + DESCRIPTION "Support for createAndWait is not required." + + OBJECT acdSaMetricConfigRowStatus + SYNTAX RowStatus { active(1) } + WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } + DESCRIPTION "Support for createAndWait is not required." + + ::= { acdSaCompliances 1 } + +END |