diff options
Diffstat (limited to 'MIBS/adtran/ADTRAN-AOS-3G')
| -rw-r--r-- | MIBS/adtran/ADTRAN-AOS-3G | 642 |
1 files changed, 642 insertions, 0 deletions
diff --git a/MIBS/adtran/ADTRAN-AOS-3G b/MIBS/adtran/ADTRAN-AOS-3G new file mode 100644 index 0000000..0565cbf --- /dev/null +++ b/MIBS/adtran/ADTRAN-AOS-3G @@ -0,0 +1,642 @@ + ADTRAN-AOS-3G DEFINITIONS ::= BEGIN + + IMPORTS + Unsigned32, Integer32, IpAddress, OBJECT-TYPE, OBJECT-IDENTITY, + MODULE-IDENTITY, NOTIFICATION-TYPE + FROM SNMPv2-SMI + DisplayString, TruthValue, TEXTUAL-CONVENTION + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + InterfaceIndex, ifIndex + FROM IF-MIB + adIdentity + FROM ADTRAN-MIB + adGenAOSConformance, adGenAOSWan + FROM ADTRAN-AOS; + + adGenAOS3GMib MODULE-IDENTITY + LAST-UPDATED "201001050000Z" + ORGANIZATION "ADTRAN, Inc." + CONTACT-INFO + "Technical Support Dept. + Postal: ADTRAN, Inc. + 901 Explorer Blvd. + Huntsville, AL 35806 + + Tel: +1 800 726-8663 + Fax: +1 256 963 6217 + E-mail: support@adtran.com" + DESCRIPTION + "A MIB module for monitoring 3G module values." + + REVISION "201001050000Z" -- Jan 5, 2010 / YYYYMMDDHHMMZ + DESCRIPTION + "Added TEXTUAL-CONVENTION EcioValue and object identifier + adGenAOS3GECIOIntegerValue. + Changes by Reba Holland." + + REVISION "201001140000Z" -- Jan 14, 2010 / YYYYMMDDHHMMZ + DESCRIPTION + "Changed syntax of object identifier + adGenAOS3GECIOIntegerValue from EcioValue to Integer32. + Removed TEXTUAL CONVENTION EcioValue. + Changes by Reba Holland." + + ::= { adIdentity 10000 53 6 2 } + +-- OBJECT IDENTIFIER + + adGenAOS3G OBJECT IDENTIFIER ::= { adGenAOSWan 2 } + +--============================================================================ + + adGenAOS3GTraps OBJECT-IDENTITY + STATUS current + DESCRIPTION "The table contains traps/alarms caused by changes in + configuration values and when statistical data reach + certain thresholds." + ::= { adGenAOS3G 0 } + +-- 3G Profile Details Entry + + + adGenAOS3GTable OBJECT-TYPE + SYNTAX SEQUENCE OF AdGenAOS3GEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table contains 3G cellular statistical data for the cellular + interface." + ::= { adGenAOS3G 1 } + + + adGenAOS3GEntry OBJECT-TYPE + SYNTAX AdGenAOS3GEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is an entry into the 3G table." + INDEX { ifIndex } + ::= { adGenAOS3GTable 1 } + + AdGenAOS3GEntry ::= + SEQUENCE { + adGenAOS3GNetworkAccessID DisplayString, + adGenAOS3GHASS BITS, + adGenAOS3GHASPI Unsigned32, + adGenAOS3GAAASS BITS, + adGenAOS3GAAASPI Unsigned32, + adGenAOS3GReverseTunneling BITS, + adGenAOS3GHomeAddress IpAddress, + adGenAOS3GPrimaryHomeAddress IpAddress, + adGenAOS3GSecHomeAddress IpAddress, + adGenAOS3GRSSI Integer32, + adGenAOS3GECIO DisplayString, + adGenAOS3GPnOffset Integer32, + adGenAOS3GServiceType DisplayString, + adGenAOS3GServiceTypePreference INTEGER, + adGenAOS3GConnectionState DisplayString, + adGenAOS3GECIOIntegerValue Integer32 + } + + -- CID_CELLULAR_NETWORK_IDENTIFIER + adGenAOS3GNetworkAccessID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Network Access ID is the User ID submitted by the 3G + Modem during Mobile IP authentication. For more information, + refer to RFC 4282." + ::= { adGenAOS3GEntry 1 } + + -- CID_CELLULAR_HA_SS + adGenAOS3GHASS OBJECT-TYPE + SYNTAX BITS { unset(0), set(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This OID displays whether the shared secret for the home + agent has been set for Mobile IP authentication." + ::= { adGenAOS3GEntry 2 } + + -- CID_CELLULAR_HA_SPI + adGenAOS3GHASPI OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Home Agent Security Parameter Index uniquely identifies a + security association for the home agent for use during Mobile + IP authentication." + ::= { adGenAOS3GEntry 3 } + + -- CID_CELLULAR_AAA_SS + adGenAOS3GAAASS OBJECT-TYPE + SYNTAX BITS { unset(0), set(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This OID displays whether the shared secret for AAA + has been set for Mobile IP authentication." + ::= { adGenAOS3GEntry 4 } + + -- CID_CELLULAR_AAA_SPI + adGenAOS3GAAASPI OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The AAA Security Parameter Index uniquely identifies a + security association for AAA for use during Mobile IP + authentication." + ::= { adGenAOS3GEntry 5 } + + -- CID_CELLULAR_REVERSE_TUNNELING + adGenAOS3GReverseTunneling OBJECT-TYPE + SYNTAX BITS { unset(0), set(1) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This OID describes if a tunnel is setup from the + 3G module's care of address to the home agent. A care of + address is a temporary IP address for a mobile device." + ::= { adGenAOS3GEntry 6 } + + -- CID_CELLULAR_HOME_ADDRESS + adGenAOS3GHomeAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The permanent home IP address for the 3G + module in the cellular network." + ::= { adGenAOS3GEntry 7 } + + -- CID_CELLULAR_PRIMARY_HOME_ADDRESS + adGenAOS3GPrimaryHomeAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The primary IP address of the 3G module's home agent." + ::= { adGenAOS3GEntry 8 } + + -- CID_CELLULAR_SECONDARY_HOME_ADDRESS + adGenAOS3GSecHomeAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The secondary IP address of the 3G module's home agent." + ::= { adGenAOS3GEntry 9 } + + -- CID_CELLULAR_RSSI + adGenAOS3GRSSI OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Receive Signal Strength Indicator for the cellular + connection. This value is a measurement of signal strength." + ::= { adGenAOS3GEntry 10 } + + -- CID_CELLULAR_ECIO + adGenAOS3GECIO OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Ec/Io for the cellular connection. This is the ratio of + received pilot energy to the total received energy. The value + is similar to signal-to-noise ratio." + ::= { adGenAOS3GEntry 11 } + + -- CID_CELLULAR_BASE_STATION_LOCATION + adGenAOS3GPnOffset OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Pn Offset for the cellular connection. Base stations + assigned to a particular frequency carrier operate at the same + center frequency. The PN offset is used to distinguish base + stations from one another." + ::= { adGenAOS3GEntry 12 } + + -- CID_CELLULAR_SERVICE_TYPE + adGenAOS3GServiceType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current Cellular Service Type for + the cellular connection." + ::= { adGenAOS3GEntry 13 } + + -- CID_CELLULAR_CDMA_SERVICE_TYPE + adGenAOS3GServiceTypePreference OBJECT-TYPE + SYNTAX INTEGER { modeAUTO(4), mode1xRTT(9), mode1xEVDO(10) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current Cellular Service Type Preference for the cellular + connection. Cellular Service Type can be forced to 1xRTT mode + or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode + which chooses the best available signal." + ::= { adGenAOS3GEntry 14 } + + -- CID_CELLULAR_CONNECT_STATE + adGenAOS3GConnectionState OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current Connection State for the cellular connection." + ::= { adGenAOS3GEntry 15 } + + -- CID_CELLULAR_ECIO + adGenAOS3GECIOIntegerValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Ec/Io for the cellular connection displayed in integer + form. This is the ratio of received pilot energy to the total + received energy. The value is similar to signal-to-noise ratio. + EC/IO values typically are represented as a value with a + decimal place. In this representation the value will be + scaled by 10. Hence a value of 1.5 will be represented as 15." + ::= { adGenAOS3GEntry 16 } + +--============================================================================ +-- 3G Hardware Profile Detail Entries +--============================================================================ + +adGenAOS3GHardwareDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF AdGenAOS3GHardwareDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table contains profile information + for the 3G cellular interface." + ::= { adGenAOS3G 2 } + + +adGenAOS3GHardwareDataEntry OBJECT-TYPE + SYNTAX AdGenAOS3GHardwareDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is an entry into the 3G hardware data table." + INDEX { ifIndex } + ::= { adGenAOS3GHardwareDataTable 1 } + + AdGenAOS3GHardwareDataEntry ::= + SEQUENCE { + adGenAOS3GSystemID Unsigned32, + adGenAOS3GNetworkID DisplayString, + adGenAOS3GPrefferedRoamList Unsigned32, + adGenAOS3GMobileDirNumber DisplayString, + adGenAOS3GESN DisplayString, + adGenAOS3GMobileStationID DisplayString, + adGenAOS3GHardwareVersion DisplayString, + adGenAOS3GFirmwareVersion DisplayString + } + + -- CID_CELLULAR_SYSTEM_ID + adGenAOS3GSystemID OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The System Identification number is the identifier + for a cellular network in a certain area." + ::= { adGenAOS3GHardwareDataEntry 1 } + + -- CID_CELLULAR_NETWORK_ID + adGenAOS3GNetworkID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Network Identification number identifies a subset + of a particular SID corresponding to different networks." + ::= { adGenAOS3GHardwareDataEntry 2 } + + -- CID_CELLULAR_PREFFERED_ROAMING_LIST + adGenAOS3GPrefferedRoamList OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PRL is a database of cell towers that the cellular modem + can roam on. This OID specifies the current version of + that database that is programmed onto the cellular modem." + ::= { adGenAOS3GHardwareDataEntry 3 } + + -- CID_CELLULAR_MOBILE_DIRECTORY_NUMBER + adGenAOS3GMobileDirNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MDN is the 10 digit phone number assigned to + the 3G module." + ::= { adGenAOS3GHardwareDataEntry 4 } + + -- CID_CELLULAR_ELECTRONIC_SERIAL_NUMBER + adGenAOS3GESN OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Electronic Serial Number is is a unique + number that identifies the 3G module." + ::= { adGenAOS3GHardwareDataEntry 5 } + + -- CID_CID_CELLULAR_MOBILE_STATION_ID + adGenAOS3GMobileStationID OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MSID is a 10 digit number that identifies + the 3G module in the network." + ::= { adGenAOS3GHardwareDataEntry 6 } + + -- CID_CELLULAR_HARDWARE_VERSION + adGenAOS3GHardwareVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The hardware version of the 3G modem." + ::= { adGenAOS3GHardwareDataEntry 7 } + + -- CID_CELLULAR_FIRMWARE_VERSION + adGenAOS3GFirmwareVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The firmware version of the 3G modem." + ::= { adGenAOS3GHardwareDataEntry 8 } + +--============================================================================ +-- 3G Threshold Entries +--============================================================================ + +adGenAOS3GThresholdDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF AdGenAOS3GThresholdDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table contains settings regarding whether the trap is enabled + and threshold values for certain traps." + ::= { adGenAOS3G 3 } + + +adGenAOS3GThresholdDataEntry OBJECT-TYPE + SYNTAX AdGenAOS3GThresholdDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is an entry into the 3G threshold data table." + INDEX { ifIndex } + ::= { adGenAOS3GThresholdDataTable 1 } + + AdGenAOS3GThresholdDataEntry ::= + SEQUENCE { + adGenAOS3GEnableTraps INTEGER, + adGenAOS3GRSSIThreshold Integer32, + adGenAOS3GECIOThreshold Integer32 + } + + -- CID_THRESHOLD_CROSSED_TRAP_ENA + adGenAOS3GEnableTraps OBJECT-TYPE + SYNTAX INTEGER { enabled(1),disabled(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This OID indicates whether traps + are enabled for the interface." + ::= { adGenAOS3GThresholdDataEntry 1 } + + -- CID_CELLULAR_RSSI_THRESHOLD + adGenAOS3GRSSIThreshold OBJECT-TYPE + SYNTAX Integer32 (-200..200) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is a value from (-200..200) that sets the threshold for + an RSSI trap to occur. When the RSSI is below this value, it + will cause an RSSI alarm trap. When the RSSI rises above this + value, it will cause an RSSI cleared trap." + ::= { adGenAOS3GThresholdDataEntry 2 } + + -- CID_CELLULAR_ECIO_THRESHOLD + adGenAOS3GECIOThreshold OBJECT-TYPE + SYNTAX Integer32 (-200..200) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is a value from (-200..200) that sets the threshold for + an ECIO trap to occur. When the ECIO is below this value, it + will cause an ECIO alarm trap. When the ECIO rises above this + value, it will cause an ECIO cleared trap." + ::= { adGenAOS3GThresholdDataEntry 3 } + +--============================================================================ +-- Traps for 3G Interface +--============================================================================ + +rssiDataRangeAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, adGenAOS3GRSSI } + STATUS current + DESCRIPTION + "This trap signifies that the SNMP entity, acting in + an agent role, has detected that the RSSI data value object for + the 3G cellular interface has exceeded the range specified by the + user." + ::= { adGenAOS3GTraps 1 } + +ecioDataRangeAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, adGenAOS3GECIO } + STATUS current + DESCRIPTION + "This trap signifies that the SNMP entity, acting in + an agent role, has detected that the ECIO data value object for + the 3G cellular interface has exceeded the range specified by the + user." + ::= { adGenAOS3GTraps 2 } + +rssiDataRangeClear NOTIFICATION-TYPE + OBJECTS { ifIndex, adGenAOS3GRSSI } + STATUS current + DESCRIPTION + "This trap signifies that the SNMP entity, acting in + an agent role, has detected that the RSSI data value object for + the 3G cellular interface has returned to the range specified by + the user." + ::= { adGenAOS3GTraps 3 } + +ecioDataRangeClear NOTIFICATION-TYPE + OBJECTS { ifIndex, adGenAOS3GECIO } + STATUS current + DESCRIPTION + "This trap signifies that the SNMP entity, acting in + an agent role, has detected that the ECIO data value object for + the 3G cellular interface has returned to the range specified by + the user." + ::= { adGenAOS3GTraps 4 } + +configValueSet NOTIFICATION-TYPE + OBJECTS { ifIndex } + STATUS current + DESCRIPTION + "This trap signifies that the SNMP entity, acting in + an agent role, has detected that a data value object for the 3G + cellular interface from the 3G Hardware Table has been modified + from the previous state." + ::= { adGenAOS3GTraps 5 } + +modemResetAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex } + STATUS current + DESCRIPTION + "This trap signifies that the SNMP entity, acting in + an agent role, has detected that the 3G modem has been reset." + ::= { adGenAOS3GTraps 6 } + +serviceTypeChangeAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex, adGenAOS3GServiceType } + STATUS current + DESCRIPTION + "This trap signifies that the SNMP entity, acting + in an agent role, has detected that the service type for the 3G + cellular interface has changed." + ::= { adGenAOS3GTraps 7} + +connectionStateDownAlarm NOTIFICATION-TYPE + OBJECTS { ifIndex } + STATUS current + DESCRIPTION + "This trap signifies that the SNMP entity, acting + in an agent role, has detected that the connection status of the + modem has gone down from either DORMANT or a CONNECTED state." + ::= { adGenAOS3GTraps 8} + +-- +-- MIB Compliance statements. +-- + + adGenAOS3GConformance OBJECT IDENTIFIER ::= { adGenAOSConformance 9 } + adGenAOS3GGroup OBJECT IDENTIFIER ::= { adGenAOS3GConformance 1 } + adGenAOS3GCompliances OBJECT IDENTIFIER ::= { adGenAOS3GConformance 2 } + + +-- Full compliance statement + adGenAOS3GFullCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities which implement + version 2 of the adGenAOS3G MIB." + + MODULE -- this module + MANDATORY-GROUPS { adGenAOS3GTableGroup } + + GROUP adGenAOS3GHardwareDataGroup + DESCRIPTION + "This optional group is used to retrieve hardware profile + statistics for a 3G interface module. Availability of data is + dependent upon configuration and interface activity." + + GROUP adGenAOS3GThresholdDataGroup + DESCRIPTION + "This optional group is used to retrieve threshold data for + the 3g interface. Availability of data is dependent upon + configuration and interface activity." + + GROUP adGenAOS3GTrapGroup + DESCRIPTION + "This optional group defines the asynchronous + notifications generated by the 3G interface." + ::= { adGenAOS3GCompliances 1 } + + -- units of conformance + + adGenAOS3GTableGroup OBJECT-GROUP + OBJECTS { + adGenAOS3GNetworkAccessID, + adGenAOS3GHASS, + adGenAOS3GHASPI, + adGenAOS3GAAASS, + adGenAOS3GAAASPI, + adGenAOS3GReverseTunneling, + adGenAOS3GHomeAddress, + adGenAOS3GPrimaryHomeAddress, + adGenAOS3GSecHomeAddress, + adGenAOS3GRSSI, + adGenAOS3GECIO, + adGenAOS3GPnOffset, + adGenAOS3GServiceType, + adGenAOS3GServiceTypePreference, + adGenAOS3GConnectionState, + adGenAOS3GECIOIntegerValue + + } + STATUS current + DESCRIPTION + "This group contains 3G cellular statistical data for profile + information." + ::= { adGenAOS3GGroup 1 } + + adGenAOS3GHardwareDataGroup OBJECT-GROUP + OBJECTS { + adGenAOS3GSystemID, + adGenAOS3GNetworkID, + adGenAOS3GPrefferedRoamList, + adGenAOS3GMobileDirNumber, + adGenAOS3GESN, + adGenAOS3GMobileStationID, + adGenAOS3GHardwareVersion, + adGenAOS3GFirmwareVersion + } + STATUS current + DESCRIPTION + "This group contains 3G cellular statistical data for hardware + information." + ::= { adGenAOS3GGroup 2 } + + adGenAOS3GThresholdDataGroup OBJECT-GROUP + OBJECTS { + adGenAOS3GEnableTraps, + adGenAOS3GRSSIThreshold, + adGenAOS3GECIOThreshold + } + STATUS current + DESCRIPTION + "This group contains threshold data for enabling 3G interface + thresholds." + ::= { adGenAOS3GGroup 3 } + + adGenAOS3GTrapGroup NOTIFICATION-GROUP + NOTIFICATIONS { + rssiDataRangeAlarm, + ecioDataRangeAlarm, + rssiDataRangeClear, + ecioDataRangeClear, + configValueSet, + modemResetAlarm, + serviceTypeChangeAlarm, + connectionStateDownAlarm + } + STATUS current + DESCRIPTION + "Traps which may be used to enhance event driven + management of the interface." + ::= { adGenAOS3GGroup 4 } + +END |