diff options
Diffstat (limited to 'MIBS/adva/ADVA-MIB')
| -rw-r--r-- | MIBS/adva/ADVA-MIB | 5861 |
1 files changed, 5861 insertions, 0 deletions
diff --git a/MIBS/adva/ADVA-MIB b/MIBS/adva/ADVA-MIB new file mode 100644 index 0000000..f42877a --- /dev/null +++ b/MIBS/adva/ADVA-MIB @@ -0,0 +1,5861 @@ +ADVA-MIB DEFINITIONS ::= BEGIN + +IMPORTS + + + + MODULE-IDENTITY, + OBJECT-IDENTITY, + OBJECT-TYPE, + NOTIFICATION-TYPE, + enterprises, + Integer32, + Unsigned32, + IpAddress, + Counter32, + Counter64, + Gauge32, + TimeTicks, + mib-2, + snmpModules + FROM SNMPv2-SMI + + + ifIndex + FROM IF-MIB + + + entPhysicalIndex + FROM ENTITY-MIB + + + DisplayString, + RowStatus, + TEXTUAL-CONVENTION, + DateAndTime, + TestAndIncr, + TimeStamp, + MacAddress + FROM SNMPv2-TC + + + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + + + MODULE-COMPLIANCE, + NOTIFICATION-GROUP, + OBJECT-GROUP + FROM SNMPv2-CONF; + +advaMIB MODULE-IDENTITY + LAST-UPDATED "201812140000Z" -- December 14, 2018 + ORGANIZATION "ADVA AG Optical Networking" + CONTACT-INFO + "ADVA AG Optical Networking + Justus-von-Liebig-Str. 7 + 12489 Berlin, Germany + + Support Europe: + Phone: +49 89 89 0665 848 + Fax: +49 89 89 0665 22848 + e-mail: support@advaoptical.com + + Support USA: + Phone: +1 201 995 0080 + Fax: +1 201 995 0081 + e-mail: support-usa@advaoptical.com + + Support Asia: + Phone: +81 3 5408 5891 + Fax: +81 3 5408 5899 + e-mail: support-asia@advaoptical.com" + DESCRIPTION "The ADVA Optical Networking base MIB." + + REVISION "201812140000Z" -- December 14, 2018 + DESCRIPTION "Revised ADVA Common MIB version 2.10." + + REVISION "201712070000Z" -- December 7, 2017 + DESCRIPTION "Revised ADVA Common MIB version 2.9." + + REVISION "201703230000Z" -- March 23, 2017 + DESCRIPTION "Revised ADVA Common MIB version 2.8." + + REVISION "201604010000Z" -- April 1, 2016 + DESCRIPTION "Revised ADVA Common MIB version 2.7." + + REVISION "201512100000Z" -- December 10, 2015 + DESCRIPTION "Revised ADVA Common MIB version 2.6." + + REVISION "201509030000Z" -- September 3, 2015 + DESCRIPTION "Revised ADVA Common MIB version 2.5." + + REVISION "201503200000Z" -- March 3, 2015 + DESCRIPTION "Revised ADVA Common MIB version 2.4." + + REVISION "201409290000Z" -- September 29, 2014 + DESCRIPTION "Revised ADVA Common MIB version 2.3." + + REVISION "201202070000Z" -- February 7, 2012 + DESCRIPTION "Revised ADVA Common MIB version 2.1." + + REVISION "200802210000Z" -- February 21, 2008 + DESCRIPTION "Revised ADVA Common MIB version 2.0." + + REVISION "200412140000Z" -- December 14, 2004 + DESCRIPTION "The ADVA Common MIB version 1.7." + + REVISION "200402200000Z" -- February 20, 2004 + DESCRIPTION "The ADVA Common MIB version 1.6." + + REVISION "200312120000Z" -- December 12, 2003 + DESCRIPTION "The ADVA Common MIB version 1.5." + + REVISION "200310070000Z" -- October 07, 2003 + DESCRIPTION "The ADVA Common MIB version 1.4." + + REVISION "200306270000Z" -- June 27, 2003 + DESCRIPTION "The ADVA Common MIB version 1.3" + + REVISION "200207220000Z" -- July 22, 2002 + DESCRIPTION "The ADVA MIB version 1.3." + ::= { enterprises 2544 } + +products OBJECT IDENTIFIER ::= { advaMIB 1 } +common OBJECT IDENTIFIER ::= { advaMIB 2 } + + +-- ************************************************************************** +-- ************************** ADVA Products ******************************* +-- ************************************************************************** + +fsp3000 OBJECT IDENTIFIER ::= { products 4 } +fsp1000 OBJECT IDENTIFIER ::= { products 6 } +fsp2000 OBJECT IDENTIFIER ::= { products 7 } +fsp1000adm OBJECT IDENTIFIER ::= { products 8 } +fsp1500 OBJECT IDENTIFIER ::= { products 9 } +fsp150 OBJECT IDENTIFIER ::= { products 10 } +fspR7 OBJECT IDENTIFIER ::= { products 11 } +fsp150cm OBJECT IDENTIFIER ::= { products 12 } +fspNm OBJECT IDENTIFIER ::= { products 13 } +fsp3000alm OBJECT IDENTIFIER ::= { products 14 } +fsp3000c OBJECT IDENTIFIER ::= { products 15 } +aos OBJECT IDENTIFIER ::= { products 20 } +aosCommon OBJECT IDENTIFIER ::= { aos 1 } +aosProducts OBJECT IDENTIFIER ::= { aos 2 } + + +-- ************************************************************************** +-- *********************** The ADVA Common MIB **************************** +-- ************************************************************************** + +neInfo OBJECT IDENTIFIER ::= { common 1 } +admin OBJECT IDENTIFIER ::= { common 2 } +events OBJECT IDENTIFIER ::= { common 3 } +software OBJECT IDENTIFIER ::= { common 4 } +config OBJECT IDENTIFIER ::= { common 5 } + +transportStandards OBJECT IDENTIFIER ::= { config 4 } +inventoryMib OBJECT IDENTIFIER ::= { config 5 } +updateBackupRestoreMib OBJECT IDENTIFIER ::= { config 6 } +snmpAgent OBJECT IDENTIFIER ::= { config 7 } + +sonet OBJECT IDENTIFIER ::= { transportStandards 1 } +otn OBJECT IDENTIFIER ::= { transportStandards 2 } +sonetConfig OBJECT IDENTIFIER ::= { sonet 1 } +otuConfig OBJECT IDENTIFIER ::= { otn 1 } +oduConfig OBJECT IDENTIFIER ::= { otn 2 } + +swAdmin OBJECT IDENTIFIER ::= { updateBackupRestoreMib 1 } +dbAdmin OBJECT IDENTIFIER ::= { updateBackupRestoreMib 2 } + +-- ************************************************************************** +-- *********************** Textual Conventions **************************** +-- ************************************************************************** + +OnOff ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Variable for representing a state and is for general use." + SYNTAX INTEGER { + on (1), + off (2) + } + +AvailState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Variable for representing availability state and is for + general use." + SYNTAX INTEGER { + available (1), + notAvailable (2) + } + +EnableState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Describes whether a feature is enabled or disabled." + SYNTAX INTEGER { + stateNotApplicable (0), + stateEnabled (1), + stateDisabled (2) + } + +ArcState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Variable for representing the Alarm Report Control (ARC) + state for an entity." + SYNTAX INTEGER { + alm (1), -- Reporting turned on (i.e., alarm traps sent). + -- Alarms are present in current alarm table + -- with own severity. + -- Transition nalm->alm: active alarm traps + -- sent with own severity. + nalm (2) -- Reporting turned off (i.e., no alarm traps). + -- Alarms are present in current alarm table + -- with severity 'notReported'. + -- Transition alm->nalm: active alarms are + -- 'cleared' by sending alarm clear traps with + -- severity 'notReported'. + -- nalmTI (3), - reporting turned off for time interval + -- nalmQI (4), - reporting turned off for qualified interval + -- nalmQICD (5) - substate of nalmQI with countdown interval + } + +TrapAlarmSeverity ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This object identifies the severity of an alarm. The state + 'cleared' is not a severity, but is used for reporting that + an alarm condition is no longer present. The state + 'notReported' is used for current alarms which are not + reported because of ARC. + The state 'indeterminate' is used when the severity value + cannot be determined due to an internal error." + SYNTAX INTEGER { + indeterminate (1), + critical (2), + major (3), + minor (4), + warning (5), + cleared (6), + notReported (7) + } + +ServiceImpairment ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "This object identifies the potential service impairment of + an alarm." + SYNTAX INTEGER { + serviceAffecting (1), + nonServiceAffecting (2), + serviceAffectingInstall (3), + serviceAffectingActivate (4) + } + +TrapCounter ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The sequence number of sent notifications (traps)." + SYNTAX Counter32 + +Counter64String ::= TEXTUAL-CONVENTION + DISPLAY-HINT "20a" + STATUS current + DESCRIPTION "A string representation of a 64 bit counter. + This TC is provided solely for SNMPv1 compliance." + SYNTAX OCTET STRING (SIZE (1..20)) + +KBytes ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A memory size, expressed in units of 1024 bytes." + SYNTAX Gauge32 + +IdentityTranslation ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Translation of an index (entPhysicalIndex, ifIndex etc.) + to a string. + Slot/Module/Port location (product specific notation) + Service/Bundle Name + + If no index available a string with: + IP address (for neTrapsinkTable etc.) + + If nothing appropriate available + zero length string + + Further info in product documentation." + SYNTAX OCTET STRING (SIZE (0..255)) + +NeSwUpgradeStatusType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "The status of a NE software upgrade command. The states 2 - 7 and 15, 18-29 are only used + when the NE is used as FTP client. States from 30 to 36 are used for reporting the + installation failure in case of revised F7 upgrade procedure, 37-28 are introduce for F7 + schedule backup." + SYNTAX INTEGER { + none (1), + downloading (2), + downloadLoginFailed (3), + downloadFileNotFound (4), + downloadFileNoAccess (5), + downloadFailure (6), + downloadReadyForInstallation (7), + installingSoftware (8), + installationFailed (9), + softwareReadyForActivation (10), + activatingSoftware (11), + activationFailed (12), + softwareActivated (13), + rebooting (14), + downloadServerUnreachable (15), + noSpaceLeft (16), -- applicable for download and activate + internalError (17), + downloadFileProtocolFailed (18), + downloadFileCheckFailed (19), + downloadSSHHostkeyFailed(20), + uploading(21), + uploadLoginFailed(22), + uploadFileNotFound(23), + uploadFileNoAccess(24), + uploadFailure(25), + uploadServerUnreachable(26), + uploadFileProtocolFailed(27), + uploadFileCheckFailed(28), + uploadSSHHostkeyFailed(29), + installationFailedDeny(30), + installationFailedWrongCrc(31), + installationFailedVersionMismatch(32), + installationFailedStbyInWrongState(33), + installationFailedDamagedConfFile(34), + installationFailedFsckFailed(35), + installationFailedNotExist(36), + downloadFileFailedProtocolDisabled(37), + uploadFileFailedProtocolDisabled(38), + backupFailedGeneration(39) + } + +NeSwInstallStatusType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Software installation status." + SYNTAX INTEGER + { + undefined(0), + idle(1), + downloadingCon(2), + installingCon(3), + downloadingNcu(4), + installingNcu(5), + downloadingFwp(6), + installingFwp(7), + downloadingPgm(8), + installingPgm(9) + } + +FileTransferProtocol ::= TEXTUAL-CONVENTION +STATUS current +DESCRIPTION + "The protocol used for a file transfer." +SYNTAX INTEGER { + -- tftp (1), + ftp (2), + scp (3), + http (4), + sftp (5) +} + +SourceIpAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "IP address used as source IP address in FTP Client session" + SYNTAX INTEGER + { + undefined(0), + sysIp(1), + defaultIp(2) + } + +F7FileTimeStamp ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Add Timestamp to File Name" + SYNTAX INTEGER + { + undefined(0), + add(1), + omit(2) + } + +F7AutoBackupInterval ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Scheduled Database Backup Interval" + SYNTAX INTEGER + { + undefined(0), + none(1), + every1Day(2), + every2Day(3), + every3Day(4), + every4Day(5), + every5Day(6), + every6Day(7), + every1Week(8), + every2Week(9), + every3Week(10), + every1Month(11), + every2Month(12), + every3Month(13) + } + + +F7AutoBackupRunState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER + { + undefined(0), + no(1), + yes(2) + } + + +PartitionStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Partition State" + SYNTAX INTEGER + { + undefined(0), + empty(1), + configFileInstalled(2), + ncuFileInstalled(3), + softwareReadyForActivation(4), + fwpsInstalled(5) + } + + +FspDate ::= TEXTUAL-CONVENTION + DISPLAY-HINT "2d-1d-1d" + STATUS current + DESCRIPTION + "A date specification. + field octets contents range + ----- ------ -------- ----- + 1 1-2 year* 0..65536 + 2 3 month 1..12 + 3 4 day 1..31 + * Notes: - the value of year is in network-byte order + For example, Tuesday May 26, 1992 would be + displayed as: + 1992-5-26" + SYNTAX OCTET STRING (SIZE(4..4)) + + +FspTime ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d-1d-1d" + STATUS current + DESCRIPTION + "A time specification. + field octets contents range + ----- ------ -------- ----- + 1 1 hour 0..23 + 2 2 minutes 0..59 + 3 3 seconds 0..60 + (use 60 for leap-second) + For example: 13-10-26" + SYNTAX OCTET STRING (SIZE(3..3)) + + +ApsDirection ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Bi-Directional | Unidirectional setup used in protection setup: Not to be used by others" + SYNTAX INTEGER + { + undefined(0), + bidirectional(1), --bidirectional + unidirectional(2) --unidirectional + } + +ApsDirectionCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Bi-Directional | Unidirectional setup used in protection setup: Not to be used by others" + SYNTAX BITS + { + capUndefined(0), + capBidirectional(1), + capUnidirectional(2) + } + +ApsHoldoffTime ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Soak period before switch after trigger." + SYNTAX INTEGER + { + undefined(0), + none(1), + e20ms(2), + e100ms(3), + e200ms(4), + e300ms(5), + e400ms(6), + e500ms(7), + e600ms(8), + e700ms(9), + e800ms(10), + e900ms(11), + e1000ms(12), + e1100ms(13), + e1200ms(14), + e1300ms(15), + e1400ms(16), + e1500ms(17), + e1600ms(18), + e1700ms(19), + e1800ms(20), + e1900ms(21), + e2000ms(22), + e2100ms(23), + e2200ms(24), + e2300ms(25), + e2400ms(26), + e2500ms(27), + e2600ms(28), + e2700ms(29), + e2800ms(30), + e2900ms(31), + e3000ms(32), + e3100ms(33), + e3200ms(34), + e3300ms(35), + e3400ms(36), + e3500ms(37), + e3600ms(38), + e3700ms(39), + e3800ms(40), + e3900ms(41), + e4000ms(42), + e4100ms(43), + e4200ms(44), + e4300ms(45), + e4400ms(46), + e4500ms(47), + e4600ms(48), + e4700ms(49), + e4800ms(50), + e4900ms(51), + e5000ms(52), + e5100ms(53), + e5200ms(54), + e5300ms(55), + e5400ms(56), + e5500ms(57), + e5600ms(58), + e5700ms(59), + e5800ms(60), + e5900ms(61), + e6000ms(62), + e6100ms(63), + e6200ms(64), + e6300ms(65), + e6400ms(66), + e6500ms(67), + e6600ms(68), + e6700ms(69), + e6800ms(70), + e6900ms(71), + e7000ms(72), + e7100ms(73), + e7200ms(74), + e7300ms(75), + e7400ms(76), + e7500ms(77), + e7600ms(78), + e7700ms(79), + e7800ms(80), + e7900ms(81), + e8000ms(82), + e8100ms(83), + e8200ms(84), + e8300ms(85), + e8400ms(86), + e8500ms(87), + e8600ms(88), + e8700ms(89), + e8800ms(90), + e8900ms(91), + e9000ms(92), + e9100ms(93), + e9200ms(94), + e9300ms(95), + e9400ms(96), + e9500ms(97), + e9600ms(98), + e9700ms(99), + e9800ms(100), + e9900ms(101), + e10000ms(102) + } + +ApsHoldoffTimeCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Soak period before switch after trigger." + SYNTAX BITS + { + capUndefined(0), + capNone(1), + capE20ms(2), + capE100ms(3), + capE200ms(4), + capE300ms(5), + capE400ms(6), + capE500ms(7), + capE600ms(8), + capE700ms(9), + capE800ms(10), + capE900ms(11), + capE1000ms(12), + capE1100ms(13), + capE1200ms(14), + capE1300ms(15), + capE1400ms(16), + capE1500ms(17), + capE1600ms(18), + capE1700ms(19), + capE1800ms(20), + capE1900ms(21), + capE2000ms(22), + capE2100ms(23), + capE2200ms(24), + capE2300ms(25), + capE2400ms(26), + capE2500ms(27), + capE2600ms(28), + capE2700ms(29), + capE2800ms(30), + capE2900ms(31), + capE3000ms(32), + capE3100ms(33), + capE3200ms(34), + capE3300ms(35), + capE3400ms(36), + capE3500ms(37), + capE3600ms(38), + capE3700ms(39), + capE3800ms(40), + capE3900ms(41), + capE4000ms(42), + capE4100ms(43), + capE4200ms(44), + capE4300ms(45), + capE4400ms(46), + capE4500ms(47), + capE4600ms(48), + capE4700ms(49), + capE4800ms(50), + capE4900ms(51), + capE5000ms(52), + capE5100ms(53), + capE5200ms(54), + capE5300ms(55), + capE5400ms(56), + capE5500ms(57), + capE5600ms(58), + capE5700ms(59), + capE5800ms(60), + capE5900ms(61), + capE6000ms(62), + capE6100ms(63), + capE6200ms(64), + capE6300ms(65), + capE6400ms(66), + capE6500ms(67), + capE6600ms(68), + capE6700ms(69), + capE6800ms(70), + capE6900ms(71), + capE7000ms(72), + capE7100ms(73), + capE7200ms(74), + capE7300ms(75), + capE7400ms(76), + capE7500ms(77), + capE7600ms(78), + capE7700ms(79), + capE7800ms(80), + capE7900ms(81), + capE8000ms(82), + capE8100ms(83), + capE8200ms(84), + capE8300ms(85), + capE8400ms(86), + capE8500ms(87), + capE8600ms(88), + capE8700ms(89), + capE8800ms(90), + capE8900ms(91), + capE9000ms(92), + capE9100ms(93), + capE9200ms(94), + capE9300ms(95), + capE9400ms(96), + capE9500ms(97), + capE9600ms(98), + capE9700ms(99), + capE9800ms(100), + capE9900ms(101), + capE10000ms(102) + } + +AssignmentState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Assignment State. Describes an entity' state." + SYNTAX INTEGER + { + undefined(0), + assigned(1), --Entity is provisioned + unassigned(2), --Entity is not provisioned + notassignable(3) --Entity cannot be provisioned due to some dependencies + } + +BootState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Boot State. Every state change (excluding IDLE) does generate a corresponding transient condition." + SYNTAX INTEGER + { + undefined(0), + complete(1), --Booting has been completed successfully + started(2), --Booting has just started + failed(3), --Fail occurred during the booting operation + reject(4), --Booting operation has been rejected + install(5), --Installation has just started + installFail(6), --Fail occurred during the installation operation + installComplete(7), --Installation has been completed + activate(8), --Activation has just started + activateFail(9), --Fail occurred during the activation operation + activateReject(10), --Activation has been rejected + activateComplete(11) --Activation has been completed + } + +CommandEqpt ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Update, Install and Reboot commands." + SYNTAX INTEGER + { + undefined(0), + none(1), + install(2), --New FWPREV will become STBY-FWPREV. + reboot(3), --EQPT Reboot. + activate(4), --STBY-FWPREV will become active FWPREV. + update(5), --New FWPREV will become active FWPREV. + installFromStby(6), --New FWPREV-SYS-STBY will become active FWPREV-STBY. + forceInstall(7) --New FWPREV will become STBY-FWPREV. This is forced operation so will be executed for all modules specified by AIDE and TYPE__EQPT no matter what is an active running FWPREV. + } + +CpWdmEntityClass ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Control Plane WDM Entity Class" + SYNTAX INTEGER + { + undefined(0), + cp(1), + tunnel(2), + connection(3), + path(4), + pathElement(5), + logicalInterface(6), + remoteAlarm(7), + portBinding(8), + reservation(9), + diversity(10) + } + +EnableStateCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Usage of 3rd Party Plugs" + SYNTAX BITS + { + capUndefined(0), + capStateEnabled(1), + capStateDisabled(2) + } + +EntityClass ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Entity Class" + SYNTAX INTEGER + { + undefined(0), + other(1), + unknown(2), + chassis(3), + backplane(4), + container(5), + powerSupply(6), + fan(7), + sensor(8), + module(9), + plug(10), + stack(11), + group(12), + clientPort(13), + networkPort(14), + virtualChannel(15), + connection(16), + vc4Container(17), + vc3sts1Container(18), + vc12vt15Container(19), + dcnChannel(20), + routerConfig(21), + environmentPort(22), + internalPort(23), + upgradePort(24), + midstagePort(25), + serialPort(26), + pppIpInterface(27), + lanIp(28), + vs1Container(29), + sts3cContainer(30), + payloadChannel(31), + passiveShelf(32), + sts24cContainer(33), + sts48cContainer(34), + vs2cContainer(35), + vs4cContainer(36), + tifInputPort(37), + tifOutputPort(38), + opticalLink(39), + virtualOpticalChannel(40), + logicalInterface(41), + physicalTerminationPoint(42), + ethClient(43), + ethNetwork(44), + veth(45), + flow(47), + ctrans(48), + policerOnFlow(50), + queueOnPort(51), + queueOnFlow(52), + farEndPlug(53), + farEndChannel(54), + vc4c8Container(55), + vc4c16Container(56), + vs0Container(57), + virtualSubChannel(58), + bridge(59), + queueOnBridge(60), + backwardVirtualOptMux(61), + forwardVirtualOptMux(62), + optChannelTransportLane(63), + virtualChannelN(64), + externalChannel(65), + virtualTerminationPoint(66), + virtualConnection(67), + virtualOptMux(68), + optTransportLaneGroup(69), + optWaveLengthGroup(70), + crossConnectionChannel(71), + crossOpticalLineChannel(72), + versatilePort(73), + system(74), + crossConnectionDcn(75), + protectionFfp(76), + protectionCable(77), + unidirectionalChannel(78), + filterCable(79), + groupTerminationPoint(80), + externalOm(81), + externalVch(82), + virtualModule(83), + virtualMap(84), + lldp(85), + managementPort(86), + licenseManager(87), + license(88) + } + +EntityIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The index of an entity. EntityIndex is used to index the following: + Entities which are provisioned but unequipped (existing in the database but + not physically present), + Entities which are equipped but non-provisioned (physically present but not in + the database), + Entities which are both provisioned and equipped (existing in the database and + physically present), + Entities which are non-provisioned and unequipped (not existing in the database + and not physically present). + These will have an entry in the entityTable, but their EntityType will + be undefined. + The EntityIndex is used similarly to how the entPhysicalIndex in + RFC2737 (Entity MIB) is used to address entities and containers of entities." + SYNTAX Integer32(0..2147483647) + +EntityType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Identifies the entity type. Each NE may have their own use of + this INTEGER value, which will defined in the conformance document + for each individual NE MIB." + SYNTAX Integer32 + +EquipmentState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER + { + undefined(0), + equipped(1), + unequipped(2) + } + +EthDuplexMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Duplex Mode (provision), available when Auto Negoiation is Disable (AUTONEG=DISABLE)" + SYNTAX INTEGER + { + undefined(0), + ethHalfDuplex(1), --Half Duplex mode + ethFullDuplex(2) --Full Duplex mode + } + +EthDuplexModeCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Duplex Mode (provision), available when Auto Negoiation is Disable (AUTONEG=DISABLE)" + SYNTAX BITS + { + capUndefined(0), + capEthHalfDuplex(1), + capEthFullDuplex(2) + } + +FileArea ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Type of Area" + SYNTAX INTEGER + { + undefined(0), + activeArea(1), --Partition on a disk which is currently in use. + standbyArea(2), --Partition on a disk which is currently not active. + rDisk(3), --Partition on a disk, which is used in software download/upload procedure. + backupDisk(4), --Disk/partition where backup files are stored. + alpDisk(5), --Disk/partition where alarm profile files are stored. + pDisk(6), --Disk/partition where external channel interface and module profile files are stored. + cfDisk(7), --Partition on CF disk, which is used in software download/upload procedure. + paDisk(8) --Disk/partition where Path Analazyer files are stored. + } + +FileType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Type of File" + SYNTAX INTEGER + { + undefined(0), + pgm(1), --Portable Gray Map image file (file containing a system image) + dbs(2), --Database file type + unknown(3), --Unknown file type + alp(4), --Alarm profile file type + ncu(5), --PGM image file with NCU-SW + fwps(6), --PGM image file with FWPS + con(7), --Configuration file + prf(8), --Profile (ECH or MOD) file + paf(9), --Path Analyzer File + dbx(10), --Encrypted Database + alm(11), --ALM Database + pak(12), --Firmware PAK file + map(13) --Master Profile + } + +FspR7AdminStateSnmpProxy ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted." + SYNTAX INTEGER + { + undefined(0), + is(2), + dsbld(6) + } + +FspR7AdminStateSnmpProxyCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted." + SYNTAX BITS + { + capUndefined(0), + capIs(2), + capDsbld(6) + } + +FspR7Date ::= TEXTUAL-CONVENTION + DISPLAY-HINT "2d-1d-1d" + STATUS current + DESCRIPTION + "A date specification. + field octets contents range + ----- ------ -------- ----- + 1 1-2 year* 0..65536 + 2 3 month 1..12 + 3 4 day 1..31 + * Notes: - the value of year is in network-byte order + For example, Tuesday May 26, 1992 would be + displayed as: + 1992-5-26" + SYNTAX OCTET STRING (SIZE(4..4)) + +FspR7EnableDisable ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Enable/Disable variable." + SYNTAX INTEGER + { + undefined(0), + enable(1), + disable(2) + } + +FspR7EquipmentType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TYPE of Equipment and the MODE setting determine uniquely + the number and allowed TYPE's of the provisionable dependent + entities (plugs, interfaces, modules)" + SYNTAX INTEGER + { + undefined(0), + eqpSh1hu(1), + eqpSh1huDc(2), + eqpSh3hu(3), --deprecated + eqpSh7hu(4), + eqpF2kSh5hu(5), --deprecated + eqpF2kSh6hu(6), --deprecated + eqpDcm(7), + eqpSh9hu(8), + eqpUnknown(19), + eqpNcu(20), + eqpNcutif(21), --deprecated + eqpScu(22), + eqpScue(23), --Never released + eqpR6cu(24), --deprecated + eqpPsu1huac(25), + eqpPsu7huac(26), + eqpPsu7hudc(27), + eqpFcu7hu(28), + eqp2clsmd(29), + eqp2absmc(30), + eqp2bsmd(31), + eqp1Gsmud(32), + eqp4gsmd(33), + eqp8gsmd(34), + eqp1csmuc(35), + eqp1csmuewc(36), + eqp4csmd(37), + eqp4csmud(38), + eqp4csmc(39), + eqpOsfm(40), + eqp1pm(41), + eqp2pm(42), + eqp40csmd(43), + eqpDcf(44), + eqpEdfas(45), + eqpEdfasgc(46), + eqpEdfadgc(47), + eqpRaman(48), + eqp4tcc2g5(49), + eqp4tcc2g5d(50), + eqp4tcc10gd(51), + eqp4tcc10gc(52), + eqpWcc10gd(53), + eqpWcc10gc(54), + eqpWcc2g71N(55), + eqpWcc2g7d(56), + eqp2tcm2g5(57), + eqp2tca2g5(58), + eqp8tca10gd(59), + eqp8tca10gc(60), + eqpWca10gd(61), + eqpWca10gc(62), + eqp4tca4gd(63), + eqp4tca4gc(64), + eqpwca2g5(65), + eqp4tca1g3d(66), + eqp4tca1g3c(67), + eqp8tce2g5d(68), + eqp8tce2g5c(69), + eqpWcelsd(70), + eqpWcelsc(71), + eqpVsm(72), + eqpRsmolm(73), + eqpRsmsf(74), + eqpOscm(75), + eqp2oscm(76), + eqpDrm(77), --deprecated + eqpXfpG(78), + eqpsfpd(79), + eqpSfpc(80), + eqpSfpg(81), + eqpSfpe(82), + eqpSh1hudcm(83), + eqpCustomc(84), + eqpCustomd(85), + eqpPsu1hudc(86), + eqpWcc2g7c(87), + eqp1csmuEwD(88), + eqp1csmuG(89), + eqp3BsmC(90), + eqp2Tca2g5s(91), + eqp8Csmuc(92), + eqpEdfaDgcb(93), --deprecated + eqpOscmPn(94), + eqp4Tcc10gtd(95), + eqp4Tca4g(96), + eqpDcg(97), + eqp2Tcm2g5d(98), + eqp2Tcm2g5c(99), + eqpWcm2g5d(100), + eqpWcm2g5c(101), + eqpEdfmSgc(102), --deprecated + eqpF2kDemiV2(103), --deprecated + eqpPsm(104), + eqpNcu2e(105), + eqp8TceGl2g5d(106), + eqp8TceGl2g5c(107), + eqpDcf1hu(108), + eqp10tcc10gtd(109), + eqp10tcc10gd(110), + eqp10tcc10gc(111), + eqp16csmSfd(112), + eqpOsfmSf(113), + eqp2clsmSfd(114), + eqp3bsmEwc(115), + eqpEdfaSgcb(116), + eqpEdfaDgcv(117), + eqpWcc10gtd(118), + eqp2csmuEwc(119), + eqpEroadmDc(120), + eqpScuS(122), + eqp4opcm(123), + eqpUtm(124), + eqpPscu(125), + eqp40Csm2hu(126), + eqp2Twcc2g7(127), + eqp2Wca10g(130), + eqpNcuHp(131), --Never released. Used in ADVA labs. + eqpNcu20085hu(132), --deprecated + eqp20Pca10G(133), + eqpXfpC(137), + eqpXfpD(138), + eqpWcc40gtd(140), + eqpIlm(141), + eqpNcuII(142), + eqpCem9hu(143), + eqp8roadmC40(148), + eqp4Tcc40gtd(149), + eqp2pca10g(150), + eqp10pca10g(151), + eqp1csmuD(152), + eqpSfpOsC(153), --Never released + eqpSfpOdC(154), + eqpSfpOsG(155), --Never released + eqpSfpOdG(156), + eqpRoadmC80(157), + eqpccm8(158), + eqpPsu9hudc(159), + eqp4tca4gus(160), + eqp40Csm3huD(161), --Never released + eqp5psm(162), + eqpFan9hu(163), + eqp5tce10gtd(164), + eqp10tccs10gtd(165), + eqp40Csm3hudcD(166), --Never released + eqp40Csm3hudcDi(167), --Never released + eqp5gsmD(169), + eqp8csmD(170), + eqp2otfm(171), + eqp8otdr3hu(172), + eqpXfptD(173), + eqp40Csm3huDi(174), --Never released + eqp8CcmC80(175), + eqpEdfaD27(176), + eqp2Wcc10g(177), + eqp8RoadmC80(178), + eqp2Wcc10gAes(180), --deprecated + eqp5tce10gtaesd(182), + eqpSh1hupf(183), + eqpFan1hu(185), + eqp10tcc10g(186), + eqpXfpOtnD(187), + eqpNcu2p(188), + eqpPsu9huac(190), + eqp2Raman(192), + eqpEdfaS26(193), + eqp5tces10gtd(194), + eqpScuII(195), + eqp11RoadmC96(196), --Never released + eqp8AdmC96(197), --Never released + eqp8CxmC96(198), --Never released + eqp8Shm(199), --Never released + eqpAmpShgcv(200), + eqpAmpSlgcv(201), + eqp2RamanC15(202), + eqpWcc100gtD(203), + eqpCfp4g(204), + eqpCfp10g(205), + eqpXfpTlnD(213), + eqp5tces10gtaesd(214), + eqp10tce100g(215), + eqp96Csm4HuD(216), + eqp4CfptD(217), + eqp2psm(218), + eqpWce100G(219), + eqp10Wxc10g(220), + eqpShx9hu(221), + eqpFanXhu(222), + eqp10tcc100gtbD(223), + eqp9RoadmC96(224), + eqp4Wce16g(225), + eqpSfpBG(226), + eqpSfpCdrG(227), + eqp10tce100gGf(228), + eqpSfpCdrC(229), + eqp5tce10gaes(234), + eqp5tce10g(235), + eqp5tces10gaes(236), + eqp5tces10g(237), + eqp4roadmC96(239), + eqpWcc100gtbD(240), + eqpEdfaS20(241), + eqp10tccSdi10g(242), + eqp4roadmEC96(243), + eqpSfptD(245), + eqpSfp2TxG(246), + eqpSfp2RxG(247), + eqpSfp2Txe(248), + eqpSfp2Rxe(249), + eqp2EdfaS20S10(250), + eqp10Tce100Gb(251), + eqp10Tce100gAes(252), + eqpSfpCdrD(253), + eqpSh1huDcEtemp(254), + eqp8psm(255), + eqp9ccmC96(256), + eqpWce100GB(257), + eqp16tcc10G(258), + eqp4Wcc10g(259), + eqp5wca16G(260), + eqpCfptCd(261), + eqpWccPcn100g(264), + eqpOppm(267), + eqp4cfpd(268), + eqpNcuS(269), + eqp10csmuD(270), + eqpUtmS(272), + eqpSfpBC(273), + eqp10Tce100gAesBsi(274), + eqpWccPcn100gAes(280), + eqpSfpRxTxG(282), + eqpSfpTlnD(283), + eqpCfpTfCd(284), + eqpXfpBG(285), + eqpFd128D(286), + eqpSfpBCdrG(289), + eqpMroadmC96(290), + eqpPsm40Mroadm(291), + eqpOsfma(292), + eqp10tcc100g(293), + eqpCfpTgCd(294), + eqpPsm80Mroadm(295), + eqp10Tce100gbAes(297), + eqpL3CmSina(298), + eqp9Tce10gAesG(300), + eqp9RoadmRs(303), + eqp16psm4(304), + eqp96Csm2HuD(305), + eqp9Tce10gAesF(307), + eqp10Tce100gAesF(308), + eqpMtpOscC(309), + eqpWcc100gAesF(311), + eqpCfpTrCd(312), + eqpWcc100gAesB(314), + eqpMapOscC(317), + eqpMtpbOscC(318), + eqpMapbOscC(319), + eqpWccPcn100gB(320), + eqp4psmS(321), + eqpWcc100gAesG(323), + eqpHdScm(324), + eqpCfp2tgCd(450), --CFP2, DWDM C-Band Tunable Coherent with up to 224Gbit/s Datarate supporting QPSK (31GBd), 8QAM (43GBd) 16QAM (31GBd) with Filter + eqpMaB2C3LtA(453), + eqpMaB5Lt(454), + eqpCfp2tCd(455), --CFP2, DWDM C-Band Tunable Coherent with up to 224Gbit/s Datarate supporting QPSK (31GBd), 8QAM (43GBd) 16QAM (31GBd) + eqpMp2B4CtS(456), --QuadFlex Single Fiber (F8 Product) + eqpPsmdc3(457), --PSM-DC3 (F8 Product) + eqpQSfpNotApproved(458), --QSFP Not Approved Plug + eqpQSfp10g(459), + eqpMa2C2C3LtA(461), --CryptoMux (F8 Product) + eqpQSfpDacCr(462), + eqpCem3(463), --CEM-3 (F8 Product) + eqpFtm3(464), --FTM-3 (F8 Product) + eqpPsmac3(465), --PSM-AC3 (F8 Product) + eqpSh1R(466), --SH1R (F8 shelf) + eqpEcm3(467), --ECM-3 (F8 Product) + eqp4QsfpG(468), + eqpScm2(472), --SCM-2 (F8 Product) + eqpMa2C5Lt(473), --OpenFab400 (F8 Product) + eqpPsmac6(474), --PSM-AC6 (F8 Product) + eqpQSfpDac(475), + eqpQSfpAoc(476), + eqpPsmdc4(478), --PSM-DC4 (F8 Product) + eqpPsmac5(479), --PSM-AC5 (F8 Product) + eqpFtm4(480), --FTM-4 (F8 Product) + eqpFtm2(481), --FTM-2 (F8 Product) + eqpPsmac4(482), --PSM-AC4 (F8 Product) + eqpPsmdc(483), --PSM-DC12 (F8 Product) + eqpCem2(485), --CEM-2 (F8 Product) + eqpCem4(486), --CEM-4 (F8 Product) + eqpEcm2(487), --ECM-2 (F8 Product) + eqpQSfp4g(488), + eqpMp2B4Ct(489), --QuadFlex (F8 Product) + eqpSh12(490), --SH12 (F8 Product) + eqpSh4R(491), --SH4R (F8 Product) + eqpPtp(499) + } + +FspR7EquipmentTypeCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The TYPE of Equipment and the MODE setting determine uniquely + the number and allowed TYPE's of the provisionable dependent + entities (plugs, interfaces, modules)" + SYNTAX BITS + { + capUndefined(0), + capEqpSh1hu(1), + capEqpSh1huDc(2), + capEqpSh3hu(3), + capEqpSh7hu(4), + capEqpF2kSh5hu(5), + capEqpF2kSh6hu(6), + capEqpDcm(7), + capEqpSh9hu(8), + capEqpUnknown(19), + capEqpNcu(20), + capEqpNcutif(21), + capEqpScu(22), + capEqpScue(23), + capEqpR6cu(24), + capEqpPsu1huac(25), + capEqpPsu7huac(26), + capEqpPsu7hudc(27), + capEqpFcu7hu(28), + capEqp2clsmd(29), + capEqp2absmc(30), + capEqp2bsmd(31), + capEqp1Gsmud(32), + capEqp4gsmd(33), + capEqp8gsmd(34), + capEqp1csmuc(35), + capEqp1csmuewc(36), + capEqp4csmd(37), + capEqp4csmud(38), + capEqp4csmc(39), + capEqpOsfm(40), + capEqp1pm(41), + capEqp2pm(42), + capEqp40csmd(43), + capEqpDcf(44), + capEqpEdfas(45), + capEqpEdfasgc(46), + capEqpEdfadgc(47), + capEqpRaman(48), + capEqp4tcc2g5(49), + capEqp4tcc2g5d(50), + capEqp4tcc10gd(51), + capEqp4tcc10gc(52), + capEqpWcc10gd(53), + capEqpWcc10gc(54), + capEqpWcc2g71N(55), + capEqpWcc2g7d(56), + capEqp2tcm2g5(57), + capEqp2tca2g5(58), + capEqp8tca10gd(59), + capEqp8tca10gc(60), + capEqpWca10gd(61), + capEqpWca10gc(62), + capEqp4tca4gd(63), + capEqp4tca4gc(64), + capEqpwca2g5(65), + capEqp4tca1g3d(66), + capEqp4tca1g3c(67), + capEqp8tce2g5d(68), + capEqp8tce2g5c(69), + capEqpWcelsd(70), + capEqpWcelsc(71), + capEqpVsm(72), + capEqpRsmolm(73), + capEqpRsmsf(74), + capEqpOscm(75), + capEqp2oscm(76), + capEqpDrm(77), + capEqpXfpG(78), + capEqpsfpd(79), + capEqpSfpc(80), + capEqpSfpg(81), + capEqpSfpe(82), + capEqpSh1hudcm(83), + capEqpCustomc(84), + capEqpCustomd(85), + capEqpPsu1hudc(86), + capEqpWcc2g7c(87), + capEqp1csmuEwD(88), + capEqp1csmuG(89), + capEqp3BsmC(90), + capEqp2Tca2g5s(91), + capEqp8Csmuc(92), + capEqpEdfaDgcb(93), + capEqpOscmPn(94), + capEqp4Tcc10gtd(95), + capEqp4Tca4g(96), + capEqpDcg(97), + capEqp2Tcm2g5d(98), + capEqp2Tcm2g5c(99), + capEqpWcm2g5d(100), + capEqpWcm2g5c(101), + capEqpEdfmSgc(102), + capEqpF2kDemiV2(103), + capEqpPsm(104), + capEqpNcu2e(105), + capEqp8TceGl2g5d(106), + capEqp8TceGl2g5c(107), + capEqpDcf1hu(108), + capEqp10tcc10gtd(109), + capEqp10tcc10gd(110), + capEqp10tcc10gc(111), + capEqp16csmSfd(112), + capEqpOsfmSf(113), + capEqp2clsmSfd(114), + capEqp3bsmEwc(115), + capEqpEdfaSgcb(116), + capEqpEdfaDgcv(117), + capEqpWcc10gtd(118), + capEqp2csmuEwc(119), + capEqpEroadmDc(120), + capEqpScuS(122), + capEqp4opcm(123), + capEqpUtm(124), + capEqpPscu(125), + capEqp40Csm2hu(126), + capEqp2Twcc2g7(127), + capEqp2Wca10g(130), + capEqpNcuHp(131), + capEqpNcu20085hu(132), + capEqp20Pca10G(133), + capEqpXfpC(137), + capEqpXfpD(138), + capEqpWcc40gtd(140), + capEqpIlm(141), + capEqpNcuII(142), + capEqpCem9hu(143), + capEqp8roadmC40(148), + capEqp4Tcc40gtd(149), + capEqp2pca10g(150), + capEqp10pca10g(151), + capEqp1csmuD(152), + capEqpSfpOsC(153), + capEqpSfpOdC(154), + capEqpSfpOsG(155), + capEqpSfpOdG(156), + capEqpRoadmC80(157), + capEqpccm8(158), + capEqpPsu9hudc(159), + capEqp4tca4gus(160), + capEqp40Csm3huD(161), + capEqp5psm(162), + capEqpFan9hu(163), + capEqp5tce10gtd(164), + capEqp10tccs10gtd(165), + capEqp40Csm3hudcD(166), + capEqp40Csm3hudcDi(167), + capEqp5gsmD(169), + capEqp8csmD(170), + capEqp2otfm(171), + capEqp8otdr3hu(172), + capEqpXfptD(173), + capEqp40Csm3huDi(174), + capEqp8CcmC80(175), + capEqpEdfaD27(176), + capEqp2Wcc10g(177), + capEqp8RoadmC80(178), + capEqp2Wcc10gAes(180), + capEqp5tce10gtaesd(182), + capEqpSh1hupf(183), + capEqpFan1hu(185), + capEqp10tcc10g(186), + capEqpXfpOtnD(187), + capEqpNcu2p(188), + capEqpPsu9huac(190), + capEqp2Raman(192), + capEqpEdfaS26(193), + capEqp5tces10gtd(194), + capEqpScuII(195), + capEqp11RoadmC96(196), + capEqp8AdmC96(197), + capEqp8CxmC96(198), + capEqp8Shm(199), + capEqpAmpShgcv(200), + capEqpAmpSlgcv(201), + capEqp2RamanC15(202), + capEqpWcc100gtD(203), + capEqpCfp4g(204), + capEqpCfp10g(205), + capEqpXfpTlnD(213), + capEqp5tces10gtaesd(214), + capEqp10tce100g(215), + capEqp96Csm4HuD(216), + capEqp4CfptD(217), + capEqp2psm(218), + capEqpWce100G(219), + capEqp10Wxc10g(220), + capEqpShx9hu(221), + capEqpFanXhu(222), + capEqp10tcc100gtbD(223), + capEqp9RoadmC96(224), + capEqp4Wce16g(225), + capEqpSfpBG(226), + capEqpSfpCdrG(227), + capEqp10tce100gGf(228), + capEqpSfpCdrC(229), + capEqp5tce10gaes(234), + capEqp5tce10g(235), + capEqp5tces10gaes(236), + capEqp5tces10g(237), + capEqp4roadmC96(239), + capEqpWcc100gtbD(240), + capEqpEdfaS20(241), + capEqp10tccSdi10g(242), + capEqp4roadmEC96(243), + capEqpSfptD(245), + capEqpSfp2TxG(246), + capEqpSfp2RxG(247), + capEqpSfp2Txe(248), + capEqpSfp2Rxe(249), + capEqp2EdfaS20S10(250), + capEqp10Tce100Gb(251), + capEqp10Tce100gAes(252), + capEqpSfpCdrD(253), + capEqpSh1huDcEtemp(254), + capEqp8psm(255), + capEqp9ccmC96(256), + capEqpWce100GB(257), + capEqp16tcc10G(258), + capEqp4Wcc10g(259), + capEqp5wca16G(260), + capEqpCfptCd(261), + capEqpWccPcn100g(264), + capEqpOppm(267), + capEqp4cfpd(268), + capEqpNcuS(269), + capEqp10csmuD(270), + capEqpUtmS(272), + capEqpSfpBC(273), + capEqp10Tce100gAesBsi(274), + capEqpWccPcn100gAes(280), + capEqpSfpRxTxG(282), + capEqpSfpTlnD(283), + capEqpCfpTfCd(284), + capEqpXfpBG(285), + capEqpFd128D(286), + capEqpSfpBCdrG(289), + capEqpMroadmC96(290), + capEqpPsm40Mroadm(291), + capEqpOsfma(292), + capEqp10tcc100g(293), + capEqpCfpTgCd(294), + capEqpPsm80Mroadm(295), + capEqp10Tce100gbAes(297), + capEqpL3CmSina(298), + capEqp9Tce10gAesG(300), + capEqp9RoadmRs(303), + capEqp16psm4(304), + capEqp96Csm2HuD(305), + capEqp9Tce10gAesF(307), + capEqp10Tce100gAesF(308), + capEqpMtpOscC(309), + capEqpWcc100gAesF(311), + capEqpCfpTrCd(312), + capEqpWcc100gAesB(314), + capEqpMapOscC(317), + capEqpMtpbOscC(318), + capEqpMapbOscC(319), + capEqpWccPcn100gB(320), + capEqp4psmS(321), + capEqpWcc100gAesG(323), + capEqpHdScm(324), + capEqpCfp2tgCd(450), + capEqpMaB2C3LtA(453), + capEqpMaB5Lt(454), + capEqpCfp2tCd(455), + capEqpMp2B4CtS(456), + capEqpPsmdc3(457), + capEqpQSfpNotApproved(458), + capEqpQSfp10g(459), + capEqpMa2C2C3LtA(461), + capEqpQSfpDacCr(462), + capEqpCem3(463), + capEqpFtm3(464), + capEqpPsmac3(465), + capEqpSh1R(466), + capEqpEcm3(467), + capEqp4QsfpG(468), + capEqpScm2(472), + capEqpMa2C5Lt(473), + capEqpPsmac6(474), + capEqpQSfpDac(475), + capEqpQSfpAoc(476), + capEqpPsmdc4(478), + capEqpPsmac5(479), + capEqpFtm4(480), + capEqpFtm2(481), + capEqpPsmac4(482), + capEqpPsmdc(483), + capEqpCem2(485), + capEqpCem4(486), + capEqpEcm2(487), + capEqpQSfp4g(488), + capEqpMp2B4Ct(489), + capEqpSh12(490), + capEqpSh4R(491), + capEqpPtp(499) + } + +FspR7FalseTrue ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "False True variable." + SYNTAX INTEGER + { + undefined(0), + false(1), + true(2) + } + +FspR7Time ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d-1d-1d" + STATUS current + DESCRIPTION + "A time specification. + field octets contents range + ----- ------ -------- ----- + 1 1 hour 0..23 + 2 2 minutes 0..59 + 3 3 seconds 0..60 + (use 60 for leap-second) + For example: 13-10-26" + SYNTAX OCTET STRING (SIZE(3..3)) + +FspR7YesNo ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "YesNo variable." + SYNTAX INTEGER + { + undefined(0), + yes(1), + no(2) + } + +FspR7UsersDb ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Specifies how user accounts are handled for database operations" + SYNTAX INTEGER + { + undefined(0), + yes(1), + no(2), + keepCurrent(3) + } + +Grade ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Used to distinguish between NCU capabilities (range of supported services or applications)" + SYNTAX INTEGER + { + undefined(0), + gradeA(1), --Supports: CWDM / WCA* and xTCA* (access type) modules + gradeB(2), --Supports: same as Grade A and additionally DWDM / WCE* and xTCE* (enterprise type) modules / WCC* and xTCC* (core type) modules / FC facilities + gradeGdps(3), --Supports: same as Grade B and additionally GDPS + gradeC(4) + } + +LoopConfig ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "External or Facility Loopback" + SYNTAX INTEGER + { + undefined(0), + noLoop(1), --Loopback is not configured + lineLoop(2), --Line loopback + inwardLoop(3) --Inward loopback + } + +LoopConfigCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "External or Facility Loopback" + SYNTAX BITS + { + capUndefined(0), + capNoLoop(1), + capLineLoop(2), + capInwardLoop(3) + } + +DestinationNodeOrAgentState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER + { + undefined(0), + inactive(1) + } + +NcuAutoActivation ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Enable scheduled activation of the standby PGM partition." + SYNTAX INTEGER + { + undefined(0), + no(1), + yes(2) + } + +NoYesNA ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Enumerator values no(1), yes(2), notApplicable(3)." + SYNTAX INTEGER + { + undefined(0), + no(1), + yes(2), + notApplicable(3) + } + +OhTerminationLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Highest signal level hardware removes then generates for transmission." + SYNTAX INTEGER + { + undefined(0), + phys(1), + otnOtu(2), + otnOdu(3), + otnOpu(4), + sonetSection(5), + sonetLine(6), + sonetPath(7), + none(8), --This is used in virtual interfaces + pcs(9), + if10GbE(10) + } + +OhTerminationLevelCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Highest signal level hardware removes then generates for transmission." + SYNTAX BITS + { + capUndefined(0), + capPhys(1), + capOtnOtu(2), + capOtnOdu(3), + capOtnOpu(4), + capSonetSection(5), + capSonetLine(6), + capSonetPath(7), + capNone(8), + capPcs(9), + capIf10GbE(10) + } + +OtnPayloadType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The PAYLOAD defines the transport service type of the payload" + SYNTAX INTEGER + { + undefined(0), + ifType10GbE(3), --Ethernet 10G LAN: Line Rate 10.3125 Gbps; supports full protocol + ifTypeOc192(4), --SONET OC-192: Line Rate 9.953 Gbps; supports full protocol + ifTypeOc48(5), --SONET OC-48: Line Rate 2.488 Gbps; supports full protocol + ifTypeStm16(6), --SDH STM-16: Line Rate 2.488 Gbps; supports full protocol + ifTypeStm64(7), --SDH STM-16: Line Rate 9.953 Gbps; supports full protocol + ifType10GFC(8), --Fibre Channel 10G: Line Rate 10.518 Gbps; supports full protocol + ifType1GFC(12), --Fibre Channel 1G: Line Rate 1.0625 Gbps; supports full protocol + ifTypeF9953(15), --Fixed Rate 9.953 Gbps; supports transport of STM-64, OC-192 or 10G Ethernet WAN + ifTypeF10312(16), --Fixed Rate 10.312 Gbps; supports transport of Ethernet 10G LAN + ifTypeF10518(17), --Fixed Rate 10.518 Gbps; supports transport of Fibre Channel 10G + ifTypeF2488(18), --Fixed Rate 2.488 Gbps; supports transport of STM-16 or OC-48 + ifType2GFC(39), --Fibre Channel 2G: Line Rate 2.125 Gbps; supports full protocol + ifType1GbE(41), --Ethernet 1G: Line Rate 1.03125 Gbps; supports full protocol + ifTypeF4250(52), --Fixed Rate 4.250 Gbps; supports transport of Fibre Channel 4G + ifTypeF10709(54), --Fixed Rate 10.709 Gbps; supports transport of OTU2 + ifTypeF11095(55), --Fixed Rate 11.095 Gbps; supports transport of OTU2e (OTU2 carrying Ethernet 10G LAN with stuffing) + ifTypeF11318(56), --Fixed Rate 11.318 Gbps; supports transport of OTU2f (OTU2 carrying Fibre Channel 10G with stuffing) + ifTypeStm1(85), --SDH STM-1: Line Rate 155.52 Mbps; supports full protocol + ifTypeStm4(86), --SDH STM-4: Line Rate 622.08 Mbps; supports full protocol + ifTypeOc3(87), --SONET OC-3: Line Rate 155.52 Mbps; supports full protocol + ifTypeOc12(88), --SONET OC-12: Line Rate 622.08 Mbps; supports full protocol + ifTypeF8500(110), --Fixed datarate 8500 Mbps; supports transport of 8G Fibre Channel + ifTypeF10000(129), --Fixed Rate 10000 Mbps; supports transport of InifinBand 10G + ifTypeF5000(150), --Fixed Rate 5.000 Gbps; supports transport of InfiniBand 5G + ifTypeF14025(178), --Fixed Rate 14.025 Gbps; supports transport of Fibre Channel 16G + ifType40GbE(192), --Ethernet 40G: Line Rate 41.250; supports full protocol + ifTypeF41250(194), --Fixed Rate 41.250 Gbps; supports transport of Ethernet 40G (40 GbE) + ifTypeF103125(195), --Fixed Rate 103.125 Gbps; supports transport of Ethernet 100G (100 GbE) + ifTypeF2457(200), --Fixed Rate 2.457 Gbps; supports transport of 4xCPRI + ifTypeFe(206), --Fast Ethernet 125 Mbps (Optical) + ifTypeE10to1000t(212), --Ethernet 10/100/1000Base-T:10/100/1000 Mbps on electrical physical layer + ifType4GFC(58), --Fibre Channel 4G: Line Rate 4.250 Gbps; supports full protocol + ifType8GFC(127), --Fibre Channel 8G: Line Rate 8.5 Gbps; supports full protocol + ifType16GFC(196), --Fibre Channel 16G: Line Rate 14.025 Gbps; supports full protocol + ifTypeE10or100bt(36), --Ethernet 10/100Base-T: Ethernet 10 or 100 Mbps on electrical physical layer + ifType25GbE(214), --Ethernet 25G LAN + ifType32GFC(215), --Fibre Channel 32G: Line Rate 28.05 Gbps + ifTypeNotDefined(499) + } + +OtnPayloadTypeCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The PAYLOAD defines the transport service type of the payload" + SYNTAX BITS + { + capUndefined(0), + capIfType10GbE(3), + capIfTypeOc192(4), + capIfTypeOc48(5), + capIfTypeStm16(6), + capIfTypeStm64(7), + capIfType10GFC(8), + capIfType1GFC(12), + capIfTypeF9953(15), + capIfTypeF10312(16), + capIfTypeF10518(17), + capIfTypeF2488(18), + capIfType2GFC(39), + capIfType1GbE(41), + capIfTypeF4250(52), + capIfTypeF10709(54), + capIfTypeF11095(55), + capIfTypeF11318(56), + capIfTypeStm1(85), + capIfTypeStm4(86), + capIfTypeOc3(87), + capIfTypeOc12(88), + capIfTypeF8500(110), + capIfTypeF10000(129), + capIfTypeF5000(150), + capIfTypeF14025(178), + capIfType40GbE(192), + capIfTypeF41250(194), + capIfTypeF103125(195), + capIfTypeF2457(200), + capIfTypeFe(206), + capIfTypeE10to1000t(212), + capIfType4GFC(58), + capIfType8GFC(127), + capIfType16GFC(196), + capIfTypeE10or100bt(36), + capIfType25GbE(214), + capIfType32GFC(215), + capIfTypeNotDefined(499) + } + +OtnTcmLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Activation of Tandem Connection Monitoring Instance A. 6 Tandem Connection Monitoring levels are available." + SYNTAX INTEGER + { + undefined(0), + tcm1(1), + tcm2(2), + tcm3(3), + tcm4(4), + tcm5(5), + tcm6(6), + disabled(7) + } + +OtnTcmLevelCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Activation of Tandem Connection Monitoring Instance A. 6 Tandem Connection Monitoring levels are available." + SYNTAX BITS + { + capUndefined(0), + capTcm1(1), + capTcm2(2), + capTcm3(3), + capTcm4(4), + capTcm5(5), + capTcm6(6), + capDisabled(7) + } + +PgmType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Program Type" + SYNTAX INTEGER + { + undefined(0), + null(1), + ncu(2), + ncuHp(3), + fwps(4), + legacy(5), + nscuS(6), + fwpe(7) + } + +ProtectionMech ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Port Based refers to HST Cards and Switches: Card Based refers to additional equipment protection" + SYNTAX INTEGER + { + undefined(0), + pathProtection(1), --Path protection + channelCardProtection(2), --Channel card protection + channelProtection(3), --Channel protection + versatileSwitchedProtection(4), + flowProtection(5), --ELINE Flow (EVC) protection + clientCardProtection(6), + controller(7), + none(8) + } + +ProtectionMechCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Port Based refers to HST Cards and Switches: Card Based refers to additional equipment protection" + SYNTAX BITS + { + capUndefined(0), + capPathProtection(1), + capChannelCardProtection(2), + capChannelProtection(3), + capVersatileSwitchedProtection(4), + capFlowProtection(5), + capClientCardProtection(6), + capController(7), + capNone(8) + } + +RestoreActivation ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Shows whether the last activation was(will be) a database restore or a new software activation" + SYNTAX INTEGER + { + undefined(0), + notRestore(1), --ACT-DBS will not be affected. + restoreFromStdBy(2), --STBY-DBS will become ACT-DBS and vice versa (ACT-DBS will become STBY-DBS). + restoreToFactory(3), --Reset to factory default. + restoreFromEqpt(4), --7.0.2 - see DBINIT + acceptDatabase(5) --upon ACTIVATE or REBOOT as command (TL1 INIT-SYS) ACCEPT will cause the physical SERNO of SHELF-1 to override the SERNO of SHELF1 in the database oan activate the database in ACT + } + +RestoreActivationCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Shows whether the last activation was(will be) a database restore or a new software activation" + SYNTAX BITS + { + capUndefined(0), + capNotRestore(1), + capRestoreFromStdBy(2), + capRestoreToFactory(3), + capRestoreFromEqpt(4), + capAcceptDatabase(5) + } + +ServiceAffecting ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Service Affecting Change during FWP upgrade and Restart operation" + SYNTAX INTEGER + { + undefined(0), + nsa(1), --Change is not service affecting + sa(2), --Change is service affecting + saActivate(3), --Activation (reboot) is service affecting + saInstall(4), --Installation is service affecting + none(5) --Update is not needed + } + +ServiceAffectingCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Service Affecting Change during FWP upgrade and Restart operation" + SYNTAX BITS + { + capUndefined(0), + capNsa(1), + capSa(2), + capSaActivate(3), + capSaInstall(4), + capNone(5) + } + +StandbyServiceAffecting ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Service Affecting Change during FWP upgrade after activation of STBY PGM partition." + SYNTAX INTEGER + { + undefined(0), + nsa(1), --Change is not service affecting + sa(2), --Change is service affecting + saActivate(3), --Activation (reboot) is service affecting + saInstall(4), --Installation is service affecting + none(5) --Update is not needed + } + +SnmpProxySynchronizationState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This parameter is used to synchronize proxy table on GNE with destination NE's + availability." + SYNTAX INTEGER + { + undefined(0), + inactive(1), + active(2) + } + +SnmpProxySynchronizationStage ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This parameter is used to indicate stage of synchronization process." + SYNTAX INTEGER + { + undefined(0), + started(1), + finished(2) + } + +SonetSectSigDegThres ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The SONET signal degrade threshold as a bit error rate." + SYNTAX INTEGER + { + undefined(0), + ber10exp5(1), --Bit error rate given in 10^5 form + ber10exp6(2), --Bit error rate given in 10^6 form + ber10exp7(3), --Bit error rate given in 10^7 form + ber10exp8(4), --Bit error rate given in 10^8 form + ber10exp9(5) --Bit error rate given in 10^9 form + } + +SonetSectSigDegThresCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The SONET signal degrade threshold as a bit error rate." + SYNTAX INTEGER + { + undefined(0), + capBer10exp5(1), + capBer10exp6(2), + capBer10exp7(3), + capBer10exp8(4), + capBer10exp9(5) + } + +SonetTimingSource ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Interface Timing Source Selection" + SYNTAX INTEGER + { + undefined(0), + loopTiming(1), --Loop source + internal(2) --Internal source + } + +SonetTimingSourceCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Interface Timing Source Selection" + SYNTAX BITS + { + capUndefined(0), + capLoopTiming(1), + capInternal(2) + } + +SonetTraceForm ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Byte-Length of Trace Compared to Expected" + SYNTAX INTEGER + { + undefined(0), + form64CRLF(1), --note: only 62 byte available for user + form16CRC7(2), --note: only 15 byte available for user + form1Byte(3) --note: [000...255] consits of 3 strings of decimal numbers + } + +SonetTraceFormCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Byte-Length of Trace Compared to Expected" + SYNTAX BITS + { + capUndefined(0), + capForm64CRLF(1), + capForm16CRC7(2), + capForm1Byte(3) + } + +SonetVcBundleAllocation ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each byte represents one sequence position in the VC bundle, always assigned + consecutively. The sequence identifies the order in which the individual VCs are combined + within the VC-4-Xv/VC-3-Xv. Each VC has a fixed unique sequence number in the range of 0 + to (X-1): byte 0: VC4/VC3 transporting the first container of the VC-4-Xv/VC-3-Xv is + assigned sequence number 0, byte 1: VC4/VC3 transporting the second container of the + VC-4-Xv/VC-3-Xv is assigned sequence number 1, etc. byte (X-1): VC4/VC3 transporting + container X of the VC-4-Xv/VC-3-Xv is assigned sequence number (X-1)." + SYNTAX OCTET STRING (SIZE(0..64)) + +SonetVcBundleAllocationCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each bit set in the bitmask represents the number + of a free VC. Bit 0 = VC #1, and so on." + SYNTAX BITS + { + vc1(0), + vc2(1), + vc3(2), + vc4(3), + vc5(4), + vc6(5), + vc7(6), + vc8(7), + vc9(8), + vc10(9), + vc11(10), + vc12(11), + vc13(12), + vc14(13), + vc15(14), + vc16(15), + vc17(16), + vc18(17), + vc19(18), + vc20(19), + vc21(20), + vc22(21), + vc23(22), + vc24(23), + vc25(24), + vc26(25), + vc27(26), + vc28(27), + vc29(28), + vc30(29), + vc31(30), + vc32(31), + vc33(32), + vc34(33), + vc35(34), + vc36(35), + vc37(36), + vc38(37), + vc39(38), + vc40(39), + vc41(40), + vc42(41), + vc43(42), + vc44(43), + vc45(44), + vc46(45), + vc47(46), + vc48(47), + vc49(48), + vc50(49), + vc51(50), + vc52(51), + vc53(52), + vc54(53), + vc55(54), + vc56(55), + vc57(56), + vc58(57), + vc59(58), + vc60(59), + vc61(60), + vc62(61), + vc63(62), + vc64(63) + } + +TimMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect." + SYNTAX INTEGER + { + undefined(0), + disabled(1), + enableAisDisabled(2), + enableAisEnabled(3) + } + +TimModeCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect." + SYNTAX BITS + { + capUndefined(0), + capDisabled(1), + capEnableAisDisabled(2), + capEnableAisEnabled(3) + } + +FspR7TrapsinkLifetime ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Lifetime of Trapsink" + SYNTAX INTEGER + { + undefined(0), + duration1hour(1), + duration1day(2), + duration3days(3), + duration1week(4), + duration1month(5), + unlimited(6) + } + +VirtualContainerType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Virtual Container Group Type" + SYNTAX INTEGER + { + undefined(0), + vc4Type(1), --Virtual Container-4; 149.76 Mbit bit rate + vc3Au4Type(2), --Virtual Container-3; 48.384 Mbit bit rate + sts1(3), --Synchronous Transport Signal-1; 48.384 Mbit bit rate + sts3c(4), --Synchronous Transport Signal-3, concatenated; 149.79 Mbit bit rate + vs1(5), --1 Gbit rate + vs2c(6), --2 Gbit rate + sts24c(7), + sts48c(8), + vs4c(9), + vc4c8(10), + vc4c16(11), + vs0(12), + vs3c(13), + vs5c(14), + vs8c(15), + vs6c(16), + odu0(17), + odu1(18), + oduFlex(19), + vs7c(20) + } + +VirtualContainerTypeCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Virtual Container Group Type" + SYNTAX BITS + { + capUndefined(0), + capVc4Type(1), + capVc3Au4Type(2), + capSts1(3), + capSts3c(4), + capVs1(5), + capVs2c(6), + capSts24c(7), + capSts48c(8), + capVs4c(9), + capVc4c8(10), + capVc4c16(11), + capVs0(12), + capVs3c(13), + capVs5c(14), + capVs8c(15), + capVs6c(16), + capOdu0(17), + capOdu1(18), + capOduFlex(19), + capVs7c(20) + } + +YesNoNA ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Enumerator values yes(1), no(2), notApplicable(3)." + SYNTAX INTEGER + { + undefined(0), + yes(1), + no(2), + notApplicable(3) + } + +LogicalIfTransport ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX OCTET STRING (SIZE(1..64)) + +LogicalIfTransportCaps ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX BITS + { + lif1(0), + lif2(1), + lif3(2), + lif4(3), + lif5(4), + lif6(5), + lif7(6), + lif8(7), + lif9(8), + lif10(9), + lif11(10), + lif12(11), + lif13(12), + lif14(13), + lif15(14), + lif16(15) + } + +ModuleForm ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Form of module" + SYNTAX INTEGER + { + undefined(0), + native(1), + legacy(2), + compatible(3), + cloudConnect(4) + } + +-- ************************************************************************** +-- ************************* NE Information ******************************* +-- ************************************************************************** + +neMibVariant OBJECT-TYPE + SYNTAX Integer32 (0..9999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The variant of the SNMP enterprise MIB. This object will + together with sysObjectID [RFC1213] uniquely identify the + revision and variant of the enterprise MIB used by the NE." + ::= { neInfo 1 } + +neManufacturer OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Manufacturer of the system. This value is used to present + in clear text the manufacturer of the system." + ::= { neInfo 2 } + +neDateAndTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Reports the current local time on the Network Element. + It also allows to set the local time. However, SET + requests may not be supported by all products." + ::= { neInfo 3 } + +neMemorySizeTotal OBJECT-TYPE + SYNTAX KBytes + UNITS "kBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The total amount of physical main memory contained in + the NEMI." + ::= { neInfo 4 } + +neMemorySizeFree OBJECT-TYPE + SYNTAX KBytes + UNITS "kBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The amount of unused physical main memory contained in + the NEMI." + ::= { neInfo 5 } + +neStorageTable OBJECT-TYPE + SYNTAX SEQUENCE OF NeStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The table of long-term storage partitions contained in + the NE." + ::= { neInfo 6 } + +neStorageEntry OBJECT-TYPE + SYNTAX NeStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry for one long-term storage partition contained in + the NE." + INDEX { neStorageIndex } + ::= { neStorageTable 1 } + +NeStorageEntry ::= SEQUENCE { + neStorageIndex Unsigned32, + neStorageDescr SnmpAdminString, + neStorageCapacity KBytes, + neStorageAvailable KBytes + } + +neStorageIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The index of the NE storage partition." + ::= { neStorageEntry 1 } + +neStorageDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The product specific description of the NE storage + partition." + ::= { neStorageEntry 2 } + +neStorageCapacity OBJECT-TYPE + SYNTAX KBytes + UNITS "kBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The total capacity of the NE storage partition." + ::= { neStorageEntry 3 } + +neStorageAvailable OBJECT-TYPE + SYNTAX KBytes + UNITS "kBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The free space on the NE storage partition." + ::= { neStorageEntry 4 } + +neAlarmStatus OBJECT-TYPE + SYNTAX TrapAlarmSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The highest severity of all currently active alarms on the + NE. Alarms that are not reported because of Alarm Report + Control (ARC) or any other administrative state are not + considered active. The values indeterminate(1) and + notReported(7) are not applicable for this object. The value + cleared(6) indicates that the NE reports no alarm + (i.e. Alarm LED(s) off)." + ::= { neInfo 7 } + +-- ************************************************************************** +-- ******************** Administration & Security ************************** +-- ************************************************************************** + +snmpWriteAccessRestriction OBJECT-TYPE + SYNTAX EnableState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This value is used in combination with the + snmpWriteAccessTable for additional security for SNMP set + requests. When the status is Disabled, SNMP set requests + from any NMS (using the correct write community) are + accepted (ie, the snmpWriteAccessTable entries do not + apply). + When the status is Enabled, however, only SNMP set requests + from NMSs (using the correct write community) which are + listed in the snmpWriteAccessTable are accepted. + This object is read-only, meaning that it cannot be updated + via the SNMP interface. The operator must configure SNMP + write access permissions via a non-SNMP interface." + ::= { admin 1 } + + +snmpWriteAccessTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnmpWriteAccessEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of authorized NMSs (identified by IP address) for + SNMP set requests. + This table is not relevant if snmpWriteAccessRestriction is + set to Disabled. + The entries of this table are read-only. This means + that the SNMP write access permissions cannot be updated via + the SNMP interface. The operator must configure them via a + non-SNMP interface." + ::= { admin 2 } + +snmpWriteAccessEntry OBJECT-TYPE + SYNTAX SnmpWriteAccessEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries in the SNMP Write Access Table. + The maximum of rows in this table is product specific, + typically 10." + INDEX { snmpWriteAccessNmsAddress } + ::= { snmpWriteAccessTable 1 } + +SnmpWriteAccessEntry ::= SEQUENCE { + snmpWriteAccessNmsAddress IpAddress, + snmpWriteAccessNmsName SnmpAdminString + } + +snmpWriteAccessNmsAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "IP Address of the NMS which has SNMP write permission." + ::= { snmpWriteAccessEntry 1 } + +snmpWriteAccessNmsName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name of the NMS." + ::= { snmpWriteAccessEntry 2 } + + +-- ************************************************************************** +-- ************************* Event Handling ******************************* +-- ************************************************************************** + +neEventsLogged OBJECT-TYPE + SYNTAX TrapCounter + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This value is the sum of all notified events (trap counter). + It is also the event number of the most recent event + (neEventLogIndex) found in the neEventLog tables. It can, + for example, be used to check if a notification (trap) is + lost. + The value is reset to 0 after a cold start. The counter is + increased even if no trap sinks are specified." + ::= { events 1 } + + +-- ************************************************************************** +-- ************************* neEventLog Table *************************** +-- ************************************************************************** +-- All enterprise-specific events are logged in the log table, even if a +-- trap was not sent to any trapsinks. +-- The events are indexed by the neEventLogIndex (used as a trap counter) +-- and include a timestamp indicating when the event occurred. +-- The corresponding neEventLogTimeStamp is included in each trap, thus +-- allowing the possibility of tracking (and detecting lost messages by +-- comparing to neEventsLogged) traps at a management station. +-- The neEventLogIdentityTranslation is also included in each trap. +-- This table is a simplified version of the nlmLogTable in [RFC3014]. +-- +-- Note: since this table can be very large, the management systems +-- should use caution when requesting information from this table +-- to reduce the load on the network (ie, always use getnext with the +-- last received trap counter as index). +-- +-- The number of available records is product specific. +-- ************************************************************************** + +neEventLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF NeEventLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of events issued by the NE's SNMP agent. The eventLog + entries are read-only." + ::= { events 2 } + +neEventLogEntry OBJECT-TYPE + SYNTAX NeEventLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries in the neEventLog Table. Enterprise traps are + always logged; logging of Generic traps is product specific." + INDEX { neEventLogIndex } + ::= { neEventLogTable 1 } + +NeEventLogEntry ::= SEQUENCE { + neEventLogIndex TrapCounter, + neEventLogTimeStamp DateAndTime, + neEventLogNotificationOID OBJECT IDENTIFIER, + neEventLogIdentityTranslation IdentityTranslation + } + +neEventLogIndex OBJECT-TYPE + SYNTAX TrapCounter + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The associated neEventsLogged counter for the logged + event (trap)." + ::= { neEventLogEntry 1 } + +neEventLogTimeStamp OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The NE Date and Time when the event (trap) occurred. This + object is used in the trap varbind." + ::= { neEventLogEntry 2 } + +neEventLogNotificationOID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The NOTIFICATION-TYPE object identifier of the event that + occurred. The last part of the OID corresponds to the + specific trap type value in the trap PDU." + ::= { neEventLogEntry 3 } + +neEventLogIdentityTranslation OBJECT-TYPE + SYNTAX IdentityTranslation + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Translation of entPhysicalIndex/ifIndex or other identifier + to a string used in the trap varbind following the timestamp + varbind." + ::= { neEventLogEntry 4 } + + +-- ************************************************************************** +-- ************************ neEventLogVar Table ************************* +-- ************************************************************************** +-- The variables of an entry in the neEventLogTable are logged in this table. +-- Note: the OctetString syntax is also used to represent DataAndTime +-- SnmpAdminString and DisplayString objects. Integer32 is also used to +-- represent INTEGER. This table is a simplified version of +-- nlmLogVariableTable in [RFC3014]. +-- ************************************************************************** + +neEventLogVarTable OBJECT-TYPE + SYNTAX SEQUENCE OF NeEventLogVarEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of variables corresponding to events logged in the + neEventLog." + ::= { events 3 } + +neEventLogVarEntry OBJECT-TYPE + SYNTAX NeEventLogVarEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries in the neEventLogVar Table. An entry appears in + this table for each variable in the varbind list of an entry + in the neEventLogTable. For an event having no variables, + no entries are found in this table." + INDEX { neEventLogIndex, neEventLogVarIndex } + ::= { neEventLogVarTable 1 } + +NeEventLogVarEntry ::= SEQUENCE { + neEventLogVarIndex Unsigned32, + neEventLogVarId OBJECT IDENTIFIER, + neEventLogVarType INTEGER, + neEventLogVarInteger32Val Integer32, + neEventLogVarIpAddressVal IpAddress, + neEventLogVarOctetStringVal OCTET STRING, + neEventLogVarOidVal OBJECT IDENTIFIER, + neEventLogVarCounter64Val Counter64, + neEventLogVarUnsigned32Val Unsigned32 +} + +neEventLogVarIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A monotonically increasing integer, starting at 1 for a + given neEventLogIndex, for indexing a variable contained in + the varbind list of a logged event." + ::= { neEventLogVarEntry 1 } + +neEventLogVarId OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The object identifier of the variable in the varbind list." + ::= { neEventLogVarEntry 2 } + +neEventLogVarType OBJECT-TYPE + SYNTAX INTEGER { + integer32 (1), + ipAddress (2), + octetString (3), + objectId (4), + counter64 (5), + -- counter32, + unsigned32 (7) + -- timeTicks, + -- opaque + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of variable. One and only one of the value objects + that follow must be instantiated, based on this type. The + used types depend on the enterprise traps defined for the + specific product." + ::= { neEventLogVarEntry 3 } + +neEventLogVarInteger32Val OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The value when neEventLogVarType is 'integer32'. Integer32 + is also used to represent INTEGER types. + Otherwise, 0 is returned." + ::= { neEventLogVarEntry 4 } + +neEventLogVarIpAddressVal OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The value when neEventLogVarType is 'ipAddress'. + Otherwise, an empty address is returned." + ::= { neEventLogVarEntry 5 } + +neEventLogVarOctetStringVal OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The value when neEventLogVarType is 'octetString'. + OctetString is used for all string types, including + DisplayString, SnmpAdminString and DateAndTime. + Otherwise, an empty string is returned." + ::= { neEventLogVarEntry 6 } + +neEventLogVarOidVal OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The value when neEventLogVarType is 'objectId'. + Otherwise, an objectId { 0.0 } is returned." + ::= { neEventLogVarEntry 7 } + +neEventLogVarCounter64Val OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The value when neEventLogVarType is 'counter64'." + ::= { neEventLogVarEntry 8 } + +neEventLogVarUnsigned32Val OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The value when neEventLogVarType is 'unsigned32'." + ::= { neEventLogVarEntry 10 } + +-- Trap Sink Table + +neTrapsinkTable OBJECT-TYPE + SYNTAX SEQUENCE OF NeTrapsinkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table of Trapsinks. A neTrapsinkTable entry can be created, + deleted or modified via the SNMP interface for a specific + address and port." + ::= { events 4 } + +neTrapsinkEntry OBJECT-TYPE + SYNTAX NeTrapsinkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries in the Trapsink Table. Entries are created and + deleted using the neTrapsinkRowStatus object. The maximum of + rows in this table is product specific." + INDEX { neTrapsinkAddress, neTrapsinkPort } + ::= { neTrapsinkTable 1 } + +NeTrapsinkEntry ::= SEQUENCE { + neTrapsinkAddress IpAddress, + neTrapsinkPort Integer32, + neTrapsinkCommunity DisplayString, + neTrapsinkRowStatus RowStatus, + neTrapsinkVersion Unsigned32, + neTrapsinkUserName DisplayString, + neTrapsinkType FspR7TrapsinkLifetime + } + +neTrapsinkAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "IP Address of the Management System which should receive + SNMP Traps." + ::= { neTrapsinkEntry 1 } + +neTrapsinkPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The port number where the specified trap sink will receive + SNMP traps." + ::= { neTrapsinkEntry 2 } + +neTrapsinkCommunity OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Community String which is sent with an SNMP Trap to the + Management Station. If no community is specified, the + default (public) is used." + ::= { neTrapsinkEntry 3 } + +neTrapsinkRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The status of this conceptual row. To create a row in this + table, set this object to createAndGo(4). To remove a row, + set this object to destroy(6)." + ::= { neTrapsinkEntry 4 } + +neTrapsinkVersion OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "" + ::= { neTrapsinkEntry 5 } + +neTrapsinkUserName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "A human readable string representing the name of the user." + ::= { neTrapsinkEntry 6 } + +neTrapsinkType OBJECT-TYPE + SYNTAX FspR7TrapsinkLifetime + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Lifetime of Trapsink." + ::= { neTrapsinkEntry 7 } + + +-- ************************************************************************** +-- ************************* System Software ****************************** +-- ************************************************************************** + +swVersionTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwVersionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Software version information table for units/modules which + run a management Operating System. This includes the + Application software and Operating System software." + ::= { software 1 } + +swVersionEntry OBJECT-TYPE + SYNTAX SwVersionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries in the swVersion Table." + INDEX { entPhysicalIndex } + ::= { swVersionTable 1 } + +SwVersionEntry ::= SEQUENCE { + swVersionActiveApplSw SnmpAdminString, + swVersionInactiveApplSw SnmpAdminString, + swVersionActiveOperatingSw SnmpAdminString, + swVersionInactiveOperatingSw SnmpAdminString, + swVersionNextBoot INTEGER + } + +swVersionActiveApplSw OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Reports the active Application software version on the + unit/module." + ::= { swVersionEntry 1 } + +swVersionInactiveApplSw OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Reports the inactive Application software version available + on the unit/module." + ::= { swVersionEntry 2 } + +swVersionActiveOperatingSw OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Reports the active Operating System software version on the + unit/module." + ::= { swVersionEntry 3 } + +swVersionInactiveOperatingSw OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Reports the inactive Operating System software version + available on the unit/module." + ::= { swVersionEntry 4 } + +swVersionNextBoot OBJECT-TYPE + SYNTAX INTEGER { + activeVersion (1), + inactiveVersion (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Reports which software will be run at next + boot, either the currently active one again + or the alternative (currently inactive) one." + ::= { swVersionEntry 5 } + +neSoftwareUpgrade OBJECT IDENTIFIER ::= { software 2 } + +neSwUpgradeRequest OBJECT-TYPE + SYNTAX INTEGER { + none (1), -- none + download (2), -- download new software + install (3), -- install new software + activate (4), -- enable installed software for next reboot + revertToPrevious (5), -- activate previously installed software + reboot (6), -- run activated software + downloadInstallActivateReboot(7), -- shortcut (NE is FTP client) + installActivateReboot (8), -- shortcut (NE is FTP server) + revertToPreviousReboot (9), -- shortcut (revert to previous) + activateAlp (10), -- activate alarm profile severities + activateDefaultAlp (11), -- activate default alarm profile severities + upload (12), -- upload file from NE to remote location + autoDownloadInstall (13), -- auto download and install from remote location + autoInstall (14), -- auto install from RDISK + fwpInstall (15), -- save module FWP to the NCU Active Area + fwpDownloadInstall (16), -- download and save module FWP to the NCU Active Area + downloadCf (17), -- download file from remote location to CF Disk + uploadCf (18), -- upload file from CF Disk to remote location + installCf (19), -- install new software from CF Disk + autoInstallCf (20), -- auto install from CF Disk + uploadPa (21), -- upload file to PA Disk + activateWithFwp (22), -- activate with firmware + forceReboot(23), -- force run activated software + stbyFwpInstall(24) -- save module FWP to the NCU Standby Area + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The request to the software upgrade function. + Request 2..6 are single step requests while requests 7..9 + are batch commands for common upgrade scenarios. Requests 13,14 + are defined for automatic install process for F7 platform. + + If the NE is the FTP server, the file must then have been + downloaded to the neSwUpgradeNeDirectory on the NE using the + 'netadmin' account." + ::= { neSoftwareUpgrade 1 } + +neSwUpgradeState OBJECT-TYPE + SYNTAX NeSwUpgradeStatusType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current status of the SW upgrade process. + NOTE: All failures that are caused by malfunctioning + hardware are reported as internalError(17)." + ::= { neSoftwareUpgrade 2 } + +neSwUpgradeServerAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The IP address of the external FTP server." + ::= { neSoftwareUpgrade 3 } + +neSwUpgradeServerLogin OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The login name on the external FTP server." + ::= { neSoftwareUpgrade 4 } + +neSwUpgradeServerPasswd OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The password on the external FTP server. Read requests on + this object will return a zero-length string." + ::= { neSoftwareUpgrade 5 } + +neSwUpgradeServerDirectory OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The SW file location (path) on the external FTP server." + ::= { neSoftwareUpgrade 6 } + +neSwUpgradeFileName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The SW file name (without path) on the external FTP server + or the name of the file which has been downloaded to the NE." + ::= { neSoftwareUpgrade 7 } + +neSwUpgradeNeDirectory OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The SW file location (path) on the NE." + ::= { neSoftwareUpgrade 8 } + +neSwUpgradeTransferProtocol OBJECT-TYPE + SYNTAX FileTransferProtocol + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transfer protocol to be used." + ::= { neSoftwareUpgrade 9 } + +sourceIpAddress OBJECT-TYPE + SYNTAX SourceIpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IP address used as source IP address in FTP Client session" + ::= { neSoftwareUpgrade 10 } + +neSwInstallState OBJECT-TYPE + SYNTAX NeSwInstallStatusType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Software installation state." + ::= { neSoftwareUpgrade 11 } + +neSwUpgradeType OBJECT-TYPE + SYNTAX INTEGER + { + undefined(0), + legacy(1), + revised(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Required procedure type to be used for software download. legacy(1) is the default value. + This parameter MUST be set before any other parameters will be set for software upgrade + procedure (for example IP address, user name, password etc.). revised(2) value corresponds + to Revised Upgrade Procedure which uses new PGM format. This parameter is NOT stored in the + database and will be reset to default after SNMP Agent restart. + " + ::= { neSoftwareUpgrade 12 } + +neSwDownloadProgress OBJECT-TYPE + SYNTAX Integer32 (0..100 | -2147483648) + UNITS "%" + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Operational progress in % i.e. file transfer" + ::= { neSoftwareUpgrade 13 } + +neSwUpgradeCommonIpSrv OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "IPv4/v6 Server Address" + ::= { neSoftwareUpgrade 14 } + +-- ************************************************************************** +-- ************************** Configuration ******************************* +-- ************************************************************************** + +provContainerTable OBJECT-TYPE + SYNTAX SEQUENCE OF ProvContainerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table defines the objects that support provisioning of + 'container' class physical entities. Provisioning sets up a + 'container' to hold a specified physical entity. This allows + a management client to configure the specified physical entity, + including all of its subordinates physical entities, before + installation. + + Provisioning allows the network manager to 'create' the + physical entities that represent the new modules. In + essence, the device simulates the installation of the new + modules into the system. This has the effect of creating all + conceptual rows in all the necessary tables that support the + physical entity and all its subordinate physical entities (e.g., + entPhysicalTable, and ifTable). + + The table extends some entries in the entPhysicalTable + (see ENTITY-MIB for further details). A entry appears in + this table for a physical entity matching the following + criteria: + + 1) Its entPhysicalClass object has a value of 'container'; + + 2) It can contain one (but not multiple) physical entity; + and, + + 3) It supports provisioning. + + + The following states cause an alarm to be raised at the level + of the containing module: + + IF provAssignmentState = assigned(1) + AND + provEquipmentState = unequipped(2) + THEN 'eqMissing' alarm + + IF provEquipmentState = invalid(3) + THEN 'eqNotAccepted' alarm + " +::= { config 1 } + +provContainerEntry OBJECT-TYPE + SYNTAX ProvContainerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entries in the provContainer Table." + INDEX { entPhysicalIndex } + ::= { provContainerTable 1 } + +ProvContainerEntry ::= SEQUENCE { + provAssignmentState INTEGER, + provEquipmentState INTEGER + } + +provAssignmentState OBJECT-TYPE + SYNTAX INTEGER { + assigned (1), -- a module type has been assigned to the container + unassigned (2) -- the container is unassigned (not provisioned) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This status indicates the assignment (provisioning) of a + module type to the container." + ::= { provContainerEntry 1 } + +provEquipmentState OBJECT-TYPE + SYNTAX INTEGER { + equipped (1), + unequipped (2), + invalid (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This status indicates how the container is equipped: + + 'equipped' The container holds a module that fits to the + container. + + 'unequipped' The container does not hold any hardware. + + 'invalid' The container holds a recognized module that + the container is not capable of supporting, + or the container holds an unrecognized + module. + " + ::= { provContainerEntry 2 } + +neBackupRestore OBJECT IDENTIFIER ::= { config 2 } + +neBackupRestoreRequest OBJECT-TYPE + SYNTAX INTEGER { + none (1), -- no operation, + runBackup (2), -- backup database file to RDISK, + runRestore (3), -- restore database from file, + dBdownload (4), -- download database file to RDISK from remote location, + dBupload (5), -- upload database file to remote location, + dbDownloadScu (6), -- download database file to SCU from remote location, + dbUploadScu (7), -- upload database file from SCU to remote location, + alpDownload (8), -- download alarm severities from alarm profile, + alpUpload (9), -- upload alarm severities from alarm profile, + runBackupScu (10) -- backup database file to SCU + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Run network element configuration Backup/Restore operation: + + - none(1): No action (read only) + + - runBackup(2): Save the network element configuration to + a file (write only) + + - runRestore(3): Restore the network element configuration + from a file (write only) + + The Restore operation does not overwrite settings which are + required to reestablish contact to the NE via SNMP and + Telnet." + ::= { neBackupRestore 1 } + +neBackupRestoreState OBJECT-TYPE + SYNTAX INTEGER { + noBackupAvailable (1), + backupInProgress (2), + backupAvailable (3), + restoreInProgress (4), + + backupRestoreFail (5), + backupRestoreIdle (6), + backupRestoreCompleted (7), + dbActivationFailed (8), + dbActivationInProgress (9) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The status of the current NE configuration backup/restore + operation activated by 'neBackupRestoreRequest'." + ::= { neBackupRestore 2 } + +neBackupRestoreFile OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The full local path of the network element configuration + backup file. + This file is generated during the Backup operation and is + also used for the Restore operation." + ::= { neBackupRestore 3 } + +neRestoreFileBackupDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The backup time of the current file to be used for Restore. + If no backup is available, this object reports 8 zero-octets." + ::= { neBackupRestore 4 } + +-- The MIB part 'neF7AutomaticRemoteBackup' and 'neF7AutomaticBackup' provides access to regular +-- F7 network element configuration backup. + +neF7AutomaticRemoteBackupSrvIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Remote server IP as a backup destination address." + ::= { neBackupRestore 5 } + +neF7AutomaticRemoteBackupSrvDir OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Remote server directory." + ::= { neBackupRestore 6 } + +neF7AutomaticRemoteBackupSrvLogin OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Remote user login." + ::= { neBackupRestore 7 } + +neF7AutomaticRemoteBackupSrvPass OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Remote user password." + ::= { neBackupRestore 8 } + +neF7AutomaticRemoteBackupProtocol OBJECT-TYPE + SYNTAX FileTransferProtocol + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Connection protocol to be used for remote backup." + ::= { neBackupRestore 10 } + +neF7AutomaticRemoteBackupSrcIp OBJECT-TYPE + SYNTAX SourceIpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Source IP address to be used for remote backup." + ::= { neBackupRestore 11 } + +neF7AutomaticRemoteBackupTimeStamp OBJECT-TYPE + SYNTAX F7FileTimeStamp + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION "Add or omit the time stamp in the backuped filename." + ::= { neBackupRestore 12 } + +neF7AutomaticRemoteBackupCommonIpSrv OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Remote server IPv4/IPv6 as a backup destination address." + ::= { neBackupRestore 13 } + +neF7AutomaticBackupTable OBJECT-TYPE + SYNTAX SEQUENCE OF NeF7AutomaticBackupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table releated to SCU/Remote backup." + ::= { neBackupRestore 20 } + +neF7AutomaticBackupEntry OBJECT-TYPE + SYNTAX NeF7AutomaticBackupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entry releated to SCU/Remote backup." + INDEX { neF7AutomaticBackupIndex } + ::= { neF7AutomaticBackupTable 1 } + +NeF7AutomaticBackupEntry ::= SEQUENCE + { neF7AutomaticBackupIndex EntityIndex, + neF7AutomaticBackupInterval F7AutoBackupInterval, + neF7AutomaticBackupStartDate FspDate, + neF7AutomaticBackupStartTime FspTime, + neF7AutomaticBackupNextDate FspDate, + neF7AutomaticBackupRunState F7AutoBackupRunState, + neF7AutomaticBackupTimeStamp F7FileTimeStamp } + +neF7AutomaticBackupIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Index of the backup entity. May be the Backup SCU + entity index or Backup Remote entity index." + ::= { neF7AutomaticBackupEntry 1 } + +neF7AutomaticBackupInterval OBJECT-TYPE + SYNTAX F7AutoBackupInterval + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Schedule database backup interval." + ::= { neF7AutomaticBackupEntry 2 } + +neF7AutomaticBackupStartDate OBJECT-TYPE + SYNTAX FspDate + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Schedule database backup start date." + ::= { neF7AutomaticBackupEntry 3 } + +neF7AutomaticBackupStartTime OBJECT-TYPE + SYNTAX FspTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Schedule database backup start time." + ::= { neF7AutomaticBackupEntry 4 } + +neF7AutomaticBackupNextDate OBJECT-TYPE + SYNTAX FspDate + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Next schedule database backup date." + ::= { neF7AutomaticBackupEntry 5 } + +neF7AutomaticBackupRunState OBJECT-TYPE + SYNTAX F7AutoBackupRunState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Automatic Backup running state." + ::= { neF7AutomaticBackupEntry 6 } + +neF7AutomaticBackupTimeStamp OBJECT-TYPE + SYNTAX F7FileTimeStamp + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Add or omit the time stamp in the backuped filename." + ::= { neF7AutomaticBackupEntry 7 } + +-- The MIB part 'neAutoBackup' provides access to regular network element +-- configuration backup. + +neAutoBackup OBJECT IDENTIFIER ::= { config 3 } + +neAutoBackupConfig OBJECT-TYPE + SYNTAX INTEGER { + disabled (1), + autoBackup (2), + autoBackupAndUpload + (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The configuration of the regular network element + configuration Backup/Restore: + + - disabled(1): No regular backup + + - autoBackup(2): Regular backup to a local file + is active + + - autoBackupAndUpload(3): Regular backup and upload to + external FTP server is active + + The default is autoBackup(2). + + If this object is not disabled(1) all other auto-backup + objects are read-only. I.e., all neAutoBackupServerXxx + objects must be set before changing this object to + autoBackupAndUpload(3)." + ::= { neAutoBackup 1 } + +neAutoBackupInterval OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "hours" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The interval between two subsequent backup actions in + hours (default: 24 hours)." + ::= { neAutoBackup 2 } + +neAutoBackupNextActionAt OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The sliding time of the next backup action (default: + midnight local NE time)." + ::= { neAutoBackup 3 } + +neAutoBackupServerAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The IP address of the external FTP server for backup files." + ::= { neAutoBackup 4 } + +neAutoBackupServerLogin OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The login name on the external FTP server for backup files." + ::= { neAutoBackup 5 } + +neAutoBackupServerPasswd OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The password on the external FTP server for backup files. + Read requests on this object will return a zero-length + string." + ::= { neAutoBackup 6 } + +neAutoBackupServerDirectory OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The directory on the external FTP server to which the + backup files will be uploaded. The file name will be + generated automatically (containing NE IP addres and backup + time)." + ::= { neAutoBackup 7 } + +sonetSectionConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF SonetSectionConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the configuration of SONET interfaces. In the naming of + parameters, only sonet (and not sdh) is used for simplification. + This table extends the entries in + the ifTable (RFC 2863)." + ::= { sonetConfig 1 } + +sonetSectionConfigEntry OBJECT-TYPE + SYNTAX SonetSectionConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "SDH/SONET interfaces will have an entry + in this table." + INDEX { + entityIndex + } + ::= { sonetSectionConfigTable 1 } + +SonetSectionConfigEntry ::= SEQUENCE + { sonetSectionConfigTimingSource SonetTimingSource, + sonetSectionConfigSignalDegradeThreshhold Unsigned32, + sonetSectionConfigSignalDegradePeriod Unsigned32, + sonetSectionConfigTraceForm SonetTraceForm, + sonetSectionConfigTraceExpected OCTET STRING, + sonetSectionConfigTraceTransmit OCTET STRING, + sonetSectionConfigTimMode TimMode } + +sonetSectionConfigTimingSource OBJECT-TYPE + SYNTAX SonetTimingSource + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The SDH/SONET timing source for this interface. + - internal: used in stand-alone, point-to-point topologies + stand-alone (dedicated fiber operation) + - loopTiming: used in point-to-point via SDH network and + feeder topologies. The default is internal(1)." + ::= { sonetSectionConfigEntry 1 } + +sonetSectionConfigSignalDegradeThreshhold OBJECT-TYPE + SYNTAX Unsigned32 (1..100 | 4294967295) + UNITS "%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Block-Error-Based Degradation Definition for SDH (standard integration period). + Defined as percentage Background Block Errors (30% default) evaluated + over a defined period (SDPER-RS)." + ::= { sonetSectionConfigEntry 2 } + +sonetSectionConfigSignalDegradePeriod OBJECT-TYPE + SYNTAX Unsigned32 (2..10 | 4294967295) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The measurement period in seconds used together with + the sonetSectionConfigSignalDegradeThreshold based on the + block error counting method. + The valid range is 2..10, The default being 7." + ::= { sonetSectionConfigEntry 3 } + +sonetSectionConfigTraceForm OBJECT-TYPE + SYNTAX SonetTraceForm + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Byte-Length of Trace Compared to Expected" + ::= { sonetSectionConfigEntry 4 } + +sonetSectionConfigTraceExpected OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..62)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made." + ::= { sonetSectionConfigEntry 5 } + +sonetSectionConfigTraceTransmit OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..62)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Sec/RS Trace to be Transmitted" + ::= { sonetSectionConfigEntry 6 } + +sonetSectionConfigTimMode OBJECT-TYPE + SYNTAX TimMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "SONET Section Trace Identifier Mismatch (TIM) detection/action for TIM defect." + ::= { sonetSectionConfigEntry 7 } + +sonetSectionDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF SonetSectionDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the status of SONET interfaces. In the naming of + parameters, only sonet (and not sdh) is used for simplification. + This table extends the entries in + the ifTable (RFC 2863)." + ::= { sonetConfig 3 } + +sonetSectionDataEntry OBJECT-TYPE + SYNTAX SonetSectionDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "SDH/SONET interfaces will have an entry + in this table." + INDEX { + entityIndex + } + ::= { sonetSectionDataTable 1 } + +SonetSectionDataEntry ::= SEQUENCE + { sonetSectionDataTraceReceived OCTET STRING } + +sonetSectionDataTraceReceived OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..62)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received Sec/RS Trace" + ::= { sonetSectionDataEntry 1 } + +otuSectionConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF OtuSectionConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the configuration of OTU interfaces. + This table extends the entries in + the ifTable (RFC 2863)." + ::= { otuConfig 1 } + +otuSectionConfigEntry OBJECT-TYPE + SYNTAX OtuSectionConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "OTU interfaces will have an entry + in this table." + INDEX { + entityIndex + } + ::= { otuSectionConfigTable 1 } + +OtuSectionConfigEntry ::= SEQUENCE + { otuSectionConfigSignalDegradeThreshold Integer32, + otuSectionConfigSignalDegradePeriod Unsigned32, + otuSectionConfigPayload OtnPayloadType, + otuSectionConfigStuffing EnableState, + otuSectionConfigTraceExpected OCTET STRING, + otuSectionConfigTraceTransmitSapi OCTET STRING, + otuSectionConfigTraceTransmitDapi OCTET STRING, + otuSectionConfigTraceTransmitOpsp OCTET STRING, + otuSectionConfigTimMode TimMode } + +otuSectionConfigSignalDegradeThreshold OBJECT-TYPE + SYNTAX Integer32 (1..100 | -2147483648) + UNITS "%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Threshold for OTU SM-SD alarm (threshold level 0..100%, default value 15 %). + Ref. table 24/G.7710." + ::= { otuSectionConfigEntry 1 } + +otuSectionConfigSignalDegradePeriod OBJECT-TYPE + SYNTAX Unsigned32 (2..10 | 4294967295) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Measuring period for OTU SM-SD alarm: 2..10 sec) (bursty) + Ref. table 24/G.7710. Default value: 7." + ::= { otuSectionConfigEntry 2 } + +otuSectionConfigPayload OBJECT-TYPE + SYNTAX OtnPayloadType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The payload of the interface (inside a transport overhead). + Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper." + ::= { otuSectionConfigEntry 3 } + +otuSectionConfigStuffing OBJECT-TYPE + SYNTAX EnableState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Indicates if bit/byte stuffing is used in the transport signal." + ::= { otuSectionConfigEntry 4 } + +otuSectionConfigTraceExpected OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made." + ::= { otuSectionConfigEntry 5 } + +otuSectionConfigTraceTransmitSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted SAPI part of the OTU trace (15 character)" + ::= { otuSectionConfigEntry 6 } + +otuSectionConfigTraceTransmitDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted DAPI part of the OTU trace (15 character)" + ::= { otuSectionConfigEntry 7 } + +otuSectionConfigTraceTransmitOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted Operator Specific part of the OTU trace (32 character)" + ::= { otuSectionConfigEntry 8 } + +otuSectionConfigTimMode OBJECT-TYPE + SYNTAX TimMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect." + ::= { otuSectionConfigEntry 9 } + +otuSectionDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF OtuSectionDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the status of OTU interfaces. + This table extends the entries in + the ifTable (RFC 2863)." + ::= { otuConfig 2 } + +otuSectionDataEntry OBJECT-TYPE + SYNTAX OtuSectionDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "OTU interfaces will have an entry + in this table." + INDEX { + entityIndex + } + ::= { otuSectionDataTable 1 } + +OtuSectionDataEntry ::= SEQUENCE + { otuSectionDataResultingTotalBitrate Unsigned32, + otuSectionDataTraceReceivedSapi OCTET STRING, + otuSectionDataTraceReceivedDapi OCTET STRING, + otuSectionDataTraceReceivedOpsp OCTET STRING } + +otuSectionDataResultingTotalBitrate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "Mbps" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This interface bitrate is dependent on the type and the payload of the interface. + Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper." + ::= { otuSectionDataEntry 1 } + +otuSectionDataTraceReceivedSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received SAPI part of the OTU trace (15 character)" + ::= { otuSectionDataEntry 2 } + +otuSectionDataTraceReceivedDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received DAPI part of the OTU trace (15 character)" + ::= { otuSectionDataEntry 3 } + +otuSectionDataTraceReceivedOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received Operator Specific part of the OTU trace (32 character)" + ::= { otuSectionDataEntry 4 } + +oduSectionConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF OduSectionConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the configuration of ODU interfaces. + This table extends the entries in + the ifTable (RFC 2863)." + ::= { oduConfig 1 } + +oduSectionConfigEntry OBJECT-TYPE + SYNTAX OduSectionConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "ODU interfaces will have an entry + in this table." + INDEX { + entityIndex + } + ::= { oduSectionConfigTable 1 } + +OduSectionConfigEntry ::= SEQUENCE + { oduSectionConfigSignalDegradeThres Integer32, + oduSectionConfigSignalDegradePeriod Unsigned32, + oduSectionConfigTraceExpected OCTET STRING, + oduSectionConfigTraceTransmitSapi OCTET STRING, + oduSectionConfigTraceTransmitDapi OCTET STRING, + oduSectionConfigTraceTransmitOpsp OCTET STRING, + oduSectionConfigTimMode TimMode } + +oduSectionConfigSignalDegradeThres OBJECT-TYPE + SYNTAX Integer32 (1..100 | -2147483648) + UNITS "%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Threshold for ODU SM-SD alarm (threshold level 0..100%, + default value 15 %. Ref. table 24/G.7710." + ::= { oduSectionConfigEntry 1 } + +oduSectionConfigSignalDegradePeriod OBJECT-TYPE + SYNTAX Unsigned32 (2..10 | 4294967295) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Measuring period for ODU SM-SD alarm: 2..10 sec) (bursty) + Ref. table 24/G.7710. Default value: 7." + ::= { oduSectionConfigEntry 2 } + +oduSectionConfigTraceExpected OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made." + ::= { oduSectionConfigEntry 3 } + +oduSectionConfigTraceTransmitSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted SAPI part of the ODU trace (15 character)" + ::= { oduSectionConfigEntry 4 } + +oduSectionConfigTraceTransmitDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted DAPI part of the ODU trace (15 character)" + ::= { oduSectionConfigEntry 5 } + +oduSectionConfigTraceTransmitOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted Operator Specific part of the ODU trace (32 character)" + ::= { oduSectionConfigEntry 6 } + +oduSectionConfigTimMode OBJECT-TYPE + SYNTAX TimMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Detection of TIM-ODU Condition can be configured" + ::= { oduSectionConfigEntry 7 } + +oduSectionDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF OduSectionDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the status of ODU interfaces. + This table extends the entries in + the ifTable (RFC 2863)." + ::= { oduConfig 2 } + +oduSectionDataEntry OBJECT-TYPE + SYNTAX OduSectionDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "ODU interfaces will have an entry + in this table." + INDEX { + entityIndex + } + ::= { oduSectionDataTable 1 } + +OduSectionDataEntry ::= SEQUENCE + { oduSectionDataTraceReceivedSapi OCTET STRING, + oduSectionDataTraceReceivedDapi OCTET STRING, + oduSectionDataTraceReceivedOpsp OCTET STRING } + +oduSectionDataTraceReceivedSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received SAPI part of the ODU trace (15 character)" + ::= { oduSectionDataEntry 1 } + +oduSectionDataTraceReceivedDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received DAPI part of the ODU trace (15 character)" + ::= { oduSectionDataEntry 2 } + +oduSectionDataTraceReceivedOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received Operator Specific part of the ODU trace (32 character)" + ::= { oduSectionDataEntry 3 } + +oduTcmAConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF OduTcmAConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the configuration of ODU interfaces. + This table extends the entries in + the ifTable (RFC 2863)." + ::= { oduConfig 3 } + +oduTcmAConfigEntry OBJECT-TYPE + SYNTAX OduTcmAConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "ODU interfaces will have an entry in this table." + INDEX { + entityIndex + } + ::= { oduTcmAConfigTable 1 } + +OduTcmAConfigEntry ::= SEQUENCE + { oduTcmAConfigSignalDegradeThreshold Integer32, + oduTcmAConfigSignalDegradePeriod Unsigned32, + oduTcmAConfigTcmLevel OtnTcmLevel, + oduTcmAConfigTraceExpected OCTET STRING, + oduTcmAConfigTraceTransmitSapi OCTET STRING, + oduTcmAConfigTraceTransmitDapi OCTET STRING, + oduTcmAConfigTraceTransmitOpsp OCTET STRING, + oduTcmAConfigTimMode TimMode } + +oduTcmAConfigSignalDegradeThreshold OBJECT-TYPE + SYNTAX Integer32 (1..100 | -2147483648) + UNITS "%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Threshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). + Ref. table 24/G.7710." + ::= { oduTcmAConfigEntry 1 } + +oduTcmAConfigSignalDegradePeriod OBJECT-TYPE + SYNTAX Unsigned32 (2..10 | 4294967295) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Measuring period for ODU SM-SD alarm: 2..10 sec) (bursty) + Ref. table 24/G.7710. Default value: 7." + ::= { oduTcmAConfigEntry 2 } + +oduTcmAConfigTcmLevel OBJECT-TYPE + SYNTAX OtnTcmLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Activation of Tandem Connection Monitoring Instance A" + ::= { oduTcmAConfigEntry 3 } + +oduTcmAConfigTraceExpected OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." + ::= { oduTcmAConfigEntry 4 } + +oduTcmAConfigTraceTransmitSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted SAPI part of the TCMA trace (15 character)" + ::= { oduTcmAConfigEntry 5 } + +oduTcmAConfigTraceTransmitDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted DAPI part of the TCMA trace (15 character)" + ::= { oduTcmAConfigEntry 6 } + +oduTcmAConfigTraceTransmitOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted Operator Specific part of the TCMA trace (32 character)" + ::= { oduTcmAConfigEntry 7 } + +oduTcmAConfigTimMode OBJECT-TYPE + SYNTAX TimMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "TCM_A Trace Identifier Mismatch (TIM) detection/action for TIM defect." + ::= { oduTcmAConfigEntry 8 } + +oduTcmBConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF OduTcmBConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the configuration of ODU interfaces. + This table extends the entries in the ifTable (RFC 2863)." + ::= { oduConfig 4 } + +oduTcmBConfigEntry OBJECT-TYPE + SYNTAX OduTcmBConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "ODU interfaces will have an entry in this table." + INDEX { + entityIndex + } + ::= { oduTcmBConfigTable 1 } + +OduTcmBConfigEntry ::= SEQUENCE + { oduTcmBConfigSignalDegradeThreshold Integer32, + oduTcmBConfigSignalDegradePeriod Unsigned32, + oduTcmBConfigTcmLevel OtnTcmLevel, + oduTcmBConfigTraceExpected OCTET STRING, + oduTcmBConfigTraceTransmitSapi OCTET STRING, + oduTcmBConfigTraceTransmitDapi OCTET STRING, + oduTcmBConfigTraceTransmitOpsp OCTET STRING, + oduTcmBConfigTimMode TimMode } + +oduTcmBConfigSignalDegradeThreshold OBJECT-TYPE + SYNTAX Integer32 (1..100 | -2147483648) + UNITS "%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Threshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). + Ref. table 24/G.7710." + ::= { oduTcmBConfigEntry 1 } + +oduTcmBConfigSignalDegradePeriod OBJECT-TYPE + SYNTAX Unsigned32 (2..10 | 4294967295) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Measuring period for ODU SM-SD alarm: 2..10 sec) (bursty) + Ref. table 24/G.7710. Default value: 7." + ::= { oduTcmBConfigEntry 2 } + +oduTcmBConfigTcmLevel OBJECT-TYPE + SYNTAX OtnTcmLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Activation of Tandem Connection Monitoring Instance B" + ::= { oduTcmBConfigEntry 3 } + +oduTcmBConfigTraceExpected OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." + ::= { oduTcmBConfigEntry 4 } + +oduTcmBConfigTraceTransmitSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted SAPI part of the TCMB trace (15 character)" + ::= { oduTcmBConfigEntry 5 } + +oduTcmBConfigTraceTransmitDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted DAPI part of the TCMB trace (15 character)" + ::= { oduTcmBConfigEntry 6 } + +oduTcmBConfigTraceTransmitOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted Operator Specific part of the TCMB trace (32 character)" + ::= { oduTcmBConfigEntry 7 } + +oduTcmBConfigTimMode OBJECT-TYPE + SYNTAX TimMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "TCM_B Trace Identifier Mismatch (TIM) detection/action for TIM defect." + ::= { oduTcmBConfigEntry 8 } + +oduTcmCConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF OduTcmCConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the configuration of ODU interfaces. + This table extends the entries in the ifTable (RFC 2863)." + ::= { oduConfig 5 } + +oduTcmCConfigEntry OBJECT-TYPE + SYNTAX OduTcmCConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "ODU interfaces will have an entry in this table." + INDEX { + entityIndex + } + ::= { oduTcmCConfigTable 1 } + +OduTcmCConfigEntry ::= SEQUENCE + { oduTcmCConfigSignalDegradeThreshold Integer32, + oduTcmCConfigSignalDegradePeriod Unsigned32, + oduTcmCConfigTcmLevel OtnTcmLevel, + oduTcmCConfigTraceExpected OCTET STRING, + oduTcmCConfigTraceTransmitSapi OCTET STRING, + oduTcmCConfigTraceTransmitDapi OCTET STRING, + oduTcmCConfigTraceTransmitOpsp OCTET STRING, + oduTcmCConfigTimMode TimMode } + +oduTcmCConfigSignalDegradeThreshold OBJECT-TYPE + SYNTAX Integer32 (1..100 | -2147483648) + UNITS "%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Threshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). + Ref. table 24/G.7710." + ::= { oduTcmCConfigEntry 1 } + +oduTcmCConfigSignalDegradePeriod OBJECT-TYPE + SYNTAX Unsigned32 (2..10 | 4294967295) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Measuring period for ODU SM-SD alarm: 2..10 sec) (bursty) + Ref. table 24/G.7710. Default value: 7." + ::= { oduTcmCConfigEntry 2 } + +oduTcmCConfigTcmLevel OBJECT-TYPE + SYNTAX OtnTcmLevel + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Activation of Tandem Connection Monitoring Instance C" + ::= { oduTcmCConfigEntry 3 } + +oduTcmCConfigTraceExpected OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made." + ::= { oduTcmCConfigEntry 4 } + +oduTcmCConfigTraceTransmitSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted SAPI part of the TCMC trace (15 character)" + ::= { oduTcmCConfigEntry 5 } + +oduTcmCConfigTraceTransmitDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted DAPI part of the TCMC trace (15 character)" + ::= { oduTcmCConfigEntry 6 } + +oduTcmCConfigTraceTransmitOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The transmitted Operator Specific part of the TCMC trace (32 character)" + ::= { oduTcmCConfigEntry 7 } + +oduTcmCConfigTimMode OBJECT-TYPE + SYNTAX TimMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION "TCM_C Trace Identifier Mismatch (TIM) detection/action for TIM defect." + ::= { oduTcmCConfigEntry 8 } + +oduTcmADataTable OBJECT-TYPE + SYNTAX SEQUENCE OF OduTcmADataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the status of ODU interfaces. + This table extends the entries in the ifTable (RFC 2863)." + ::= { oduConfig 6 } + +oduTcmADataEntry OBJECT-TYPE + SYNTAX OduTcmADataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "ODU interfaces will have an entry in this table." + INDEX { + entityIndex + } + ::= { oduTcmADataTable 1 } + +OduTcmADataEntry ::= SEQUENCE + { oduTcmADataTraceReceivedSapi OCTET STRING, + oduTcmADataTraceReceivedDapi OCTET STRING, + oduTcmADataTraceReceivedOpsp OCTET STRING } + +oduTcmADataTraceReceivedSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received SAPI part of the TCMA trace (15 character)" + ::= { oduTcmADataEntry 1 } + +oduTcmADataTraceReceivedDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received DAPI part of the TCMA trace (15 character)" + ::= { oduTcmADataEntry 2 } + +oduTcmADataTraceReceivedOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received Operator Specific part of the TCMA trace (32 character)" + ::= { oduTcmADataEntry 3 } + +oduTcmBDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF OduTcmBDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the status of ODU interfaces. + This table extends the entries in the ifTable (RFC 2863)." + ::= { oduConfig 7 } + +oduTcmBDataEntry OBJECT-TYPE + SYNTAX OduTcmBDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "ODU interfaces will have an entry in this table." + INDEX { + entityIndex + } + ::= { oduTcmBDataTable 1 } + +OduTcmBDataEntry ::= SEQUENCE + { oduTcmBDataTraceReceivedSapi OCTET STRING, + oduTcmBDataTraceReceivedDapi OCTET STRING, + oduTcmBDataTraceReceivedOpsp OCTET STRING } + +oduTcmBDataTraceReceivedSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received SAPI part of the TCMB trace (15 character)" + ::= { oduTcmBDataEntry 1 } + +oduTcmBDataTraceReceivedDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received DAPI part of the TCMB trace (15 character)" + ::= { oduTcmBDataEntry 2 } + +oduTcmBDataTraceReceivedOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received Operator Specific part of the TCMB trace (32 character)" + ::= { oduTcmBDataEntry 3 } + +oduTcmCDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF OduTcmCDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Contains entries for the status of ODU interfaces. + This table extends the entries in the ifTable (RFC 2863)." + ::= { oduConfig 8 } + +oduTcmCDataEntry OBJECT-TYPE + SYNTAX OduTcmCDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "ODU interfaces will have an entry in this table." + INDEX { + entityIndex + } + ::= { oduTcmCDataTable 1 } + +OduTcmCDataEntry ::= SEQUENCE + { oduTcmCDataTraceReceivedSapi OCTET STRING, + oduTcmCDataTraceReceivedDapi OCTET STRING, + oduTcmCDataTraceReceivedOpsp OCTET STRING } + +oduTcmCDataTraceReceivedSapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received SAPI part of the TCMC trace (15 character)" + ::= { oduTcmCDataEntry 1 } + +oduTcmCDataTraceReceivedDapi OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received DAPI part of the TCMC trace (15 character)" + ::= { oduTcmCDataEntry 2 } + +oduTcmCDataTraceReceivedOpsp OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The received Operator Specific part of the TCMC trace (32 character)" + ::= { oduTcmCDataEntry 3 } + +inventoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF InventoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This table lists all physically present (equipped) equipment in the NE" + ::= { inventoryMib 1 } + +inventoryEntry OBJECT-TYPE + SYNTAX InventoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + entityIndex + } + ::= { inventoryTable 1 } + +InventoryEntry ::= SEQUENCE + { inventoryUnitName SnmpAdminString, + inventoryFirmwarePackageRev SnmpAdminString, + inventoryHardwareRev SnmpAdminString, + inventorySoftwareRev SnmpAdminString, + inventoryFpgaRev SnmpAdminString, + inventorySerialNum SnmpAdminString, + inventoryPartnumber SnmpAdminString, + inventoryCleiCode SnmpAdminString, + inventoryVendorId SnmpAdminString, + inventoryType EntityType, + inventoryUniversalSerialIdent SnmpAdminString, + inventoryMacAddress MacAddress, + inventoryGradeInventory Grade, + inventoryCfSerialNum SnmpAdminString, + inventoryCfModel SnmpAdminString } + +inventoryUnitName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ADVA Official Equipment Name" + ::= { inventoryEntry 1 } + +inventoryFirmwarePackageRev OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Firmware Package Revision Number" + ::= { inventoryEntry 2 } + +inventoryHardwareRev OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Equipment Revision Number" + ::= { inventoryEntry 3 } + +inventorySoftwareRev OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The active Application software version on the unit/module." + ::= { inventoryEntry 4 } + +inventoryFpgaRev OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The active FPGA version on the unit/module." + ::= { inventoryEntry 5 } + +inventorySerialNum OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Equipment Serial Number" + ::= { inventoryEntry 6 } + +inventoryPartnumber OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ADVA Part Number" + ::= { inventoryEntry 7 } + +inventoryCleiCode OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Common Language Equipment Identifier" + ::= { inventoryEntry 8 } + +inventoryVendorId OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "OEM Vendor Code" + ::= { inventoryEntry 9 } + +inventoryType OBJECT-TYPE + SYNTAX EntityType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Type of a physical entity: shelf/module/plug" + ::= { inventoryEntry 10 } + +inventoryUniversalSerialIdent OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Unique Serial Identifier" + ::= { inventoryEntry 11 } + +inventoryMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Ethernet MAC address" + ::= { inventoryEntry 12 } + +inventoryGradeInventory OBJECT-TYPE + SYNTAX Grade + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Used to distinguish between NCU capabilities (range of supported services or applications)" + ::= { inventoryEntry 13 } + +inventoryCfSerialNum OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compact Flash Serial Number" + ::= { inventoryEntry 14 } + +inventoryCfModel OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compact Flash Model Number" + ::= { inventoryEntry 15 } + +entityTable OBJECT-TYPE + SYNTAX SEQUENCE OF EntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for all existing addresses. Entities in this table are either + provisioned, equipped, both of these or neither of these. Containers + are always present in the table as long as their supporting entity + is provisioned or equipped." + ::= { inventoryMib 2 } + +entityEntry OBJECT-TYPE + SYNTAX EntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entry for all existing addresses." + INDEX { + entityIndex + } + ::= { entityTable 1 } + +EntityEntry ::= SEQUENCE + { entityIndex EntityIndex, + entityContainedIn EntityIndex, + entityClass EntityClass, + entityClassInstanceNumber Integer32, + entityIndexAid SnmpAdminString, + entityType EntityType, + entityAssignmentState AssignmentState, + entityEquipmentState EquipmentState } + +entityIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Existing adress index" + ::= { entityEntry 1 } + +entityContainedIn OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Contained in" + ::= { entityEntry 2 } + +entityClass OBJECT-TYPE + SYNTAX EntityClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EntityClass" + ::= { entityEntry 3 } + +entityClassInstanceNumber OBJECT-TYPE + SYNTAX Integer32 (1..32000 | -2147483648) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The class instance number of this entity within the module(card)" + ::= { entityEntry 4 } + +entityIndexAid OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name" + ::= { entityEntry 5 } + +entityType OBJECT-TYPE + SYNTAX EntityType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of FspR7 entity. Please refer to EntityType for further deails." + ::= { entityEntry 6 } + +entityAssignmentState OBJECT-TYPE + SYNTAX AssignmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See AssignmentState." + ::= { entityEntry 7 } + +entityEquipmentState OBJECT-TYPE + SYNTAX EquipmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EquipmentState." + ::= { entityEntry 8 } + +containsTable OBJECT-TYPE + SYNTAX SEQUENCE OF ContainsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for all existing addresses. Gives the index of the subtending + entity in the containment." + ::= { inventoryMib 3 } + +containsEntry OBJECT-TYPE + SYNTAX ContainsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + entityIndex, + containsIndex + } + ::= { containsTable 1 } + +ContainsEntry ::= SEQUENCE + { containsIndex EntityIndex } + +containsIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "" + ::= { containsEntry 1 } + +controlPlaneWdmEntityTable OBJECT-TYPE + SYNTAX SEQUENCE OF ControlPlaneWdmEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for all existing addresses. Entities in this table are either + provisioned, equipped, both of these or neither of these. Containers + are always present in the table as long as their supporting entity + is provisioned or equipped." + ::= { inventoryMib 4 } + +controlPlaneWdmEntityEntry OBJECT-TYPE + SYNTAX ControlPlaneWdmEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entry for all existing addresses." + INDEX { + controlPlaneWdmEntityIndex + } + ::= { controlPlaneWdmEntityTable 1 } + +ControlPlaneWdmEntityEntry ::= SEQUENCE + { controlPlaneWdmEntityIndex EntityIndex, + controlPlaneWdmEntityContainedIn EntityIndex, + controlPlaneWdmEntityClass CpWdmEntityClass, + controlPlaneWdmEntityClassInstanceNumber Integer32, + controlPlaneWdmEntityIndexAid SnmpAdminString, + controlPlaneWdmEntityAssignmentState AssignmentState } + +controlPlaneWdmEntityIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Existing adress index" + ::= { controlPlaneWdmEntityEntry 1 } + +controlPlaneWdmEntityContainedIn OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Contained in" + ::= { controlPlaneWdmEntityEntry 2 } + +controlPlaneWdmEntityClass OBJECT-TYPE + SYNTAX CpWdmEntityClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EntityClass" + ::= { controlPlaneWdmEntityEntry 3 } + +controlPlaneWdmEntityClassInstanceNumber OBJECT-TYPE + SYNTAX Integer32 (1..32000 | -2147483648) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The class instance number of this entity within the module(card)" + ::= { controlPlaneWdmEntityEntry 4 } + +controlPlaneWdmEntityIndexAid OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name" + ::= { controlPlaneWdmEntityEntry 5 } + +controlPlaneWdmEntityAssignmentState OBJECT-TYPE + SYNTAX AssignmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See AssignmentState." + ::= { controlPlaneWdmEntityEntry 6 } + +controlPlaneWdmContainsTable OBJECT-TYPE + SYNTAX SEQUENCE OF ControlPlaneWdmContainsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for all existing addresses. Gives the index of the subtending + entity in the containment." + ::= { inventoryMib 5 } + +controlPlaneWdmContainsEntry OBJECT-TYPE + SYNTAX ControlPlaneWdmContainsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + controlPlaneWdmEntityIndex, + controlPlaneWdmContainsIndex + } + ::= { controlPlaneWdmContainsTable 1 } + +ControlPlaneWdmContainsEntry ::= SEQUENCE + { controlPlaneWdmContainsIndex EntityIndex } + +controlPlaneWdmContainsIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "" + ::= { controlPlaneWdmContainsEntry 1 } + +controlPlaneEthEntityTable OBJECT-TYPE + SYNTAX SEQUENCE OF ControlPlaneEthEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for all existing addresses. Entities in this table are either + provisioned, equipped, both of these or neither of these. Containers + are always present in the table as long as their supporting entity + is provisioned or equipped." + ::= { inventoryMib 6 } + +controlPlaneEthEntityEntry OBJECT-TYPE + SYNTAX ControlPlaneEthEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entry for all existing addresses." + INDEX { + controlPlaneEthEntityIndex + } + ::= { controlPlaneEthEntityTable 1 } + +ControlPlaneEthEntityEntry ::= SEQUENCE + { controlPlaneEthEntityIndex EntityIndex, + controlPlaneEthEntityContainedIn EntityIndex, + controlPlaneEthEntityClass CpWdmEntityClass, + controlPlaneEthEntityClassInstanceNumber Integer32, + controlPlaneEthEntityIndexAid SnmpAdminString, + controlPlaneEthEntityAssignmentState AssignmentState } + +controlPlaneEthEntityIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Existing adress index" + ::= { controlPlaneEthEntityEntry 1 } + +controlPlaneEthEntityContainedIn OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Contained in" + ::= { controlPlaneEthEntityEntry 2 } + +controlPlaneEthEntityClass OBJECT-TYPE + SYNTAX CpWdmEntityClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EntityClass" + ::= { controlPlaneEthEntityEntry 3 } + +controlPlaneEthEntityClassInstanceNumber OBJECT-TYPE + SYNTAX Integer32 (1..32000 | -2147483648) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The class instance number of this entity within the module(card)" + ::= { controlPlaneEthEntityEntry 4 } + +controlPlaneEthEntityIndexAid OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name" + ::= { controlPlaneEthEntityEntry 5 } + +controlPlaneEthEntityAssignmentState OBJECT-TYPE + SYNTAX AssignmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See AssignmentState." + ::= { controlPlaneEthEntityEntry 6 } + +controlPlaneEthContainsTable OBJECT-TYPE + SYNTAX SEQUENCE OF ControlPlaneEthContainsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for all existing addresses. Gives the index of the subtending + entity in the containment." + ::= { inventoryMib 7 } + +controlPlaneEthContainsEntry OBJECT-TYPE + SYNTAX ControlPlaneEthContainsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + controlPlaneEthEntityIndex, + controlPlaneEthContainsIndex + } + ::= { controlPlaneEthContainsTable 1 } + +ControlPlaneEthContainsEntry ::= SEQUENCE + { controlPlaneEthContainsIndex EntityIndex } + +controlPlaneEthContainsIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "" + ::= { controlPlaneEthContainsEntry 1 } + +ptpEntityTable OBJECT-TYPE + SYNTAX SEQUENCE OF PtpEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for PTP existing addresses. Entities in this table are either + provisioned, equipped, both of these or neither of these. Containers + are always present in the table as long as their supporting entity + is provisioned or equipped." + ::= { inventoryMib 10 } + +ptpEntityEntry OBJECT-TYPE + SYNTAX PtpEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + ptpEntityIndex + } + ::= { ptpEntityTable 1 } + +PtpEntityEntry ::= SEQUENCE + { ptpEntityIndex EntityIndex, + ptpEntityContainedIn EntityIndex, + ptpEntityClass EntityClass, + ptpEntityClassInstanceNumber Integer32, + ptpEntityIndexAid SnmpAdminString, + ptpEntityType EntityType, + ptpEntityAssignmentState AssignmentState, + ptpEntityEquipmentState EquipmentState, + ptpEntityReferencedTo EntityIndex } + +ptpEntityIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Existing adress index" + ::= { ptpEntityEntry 1 } + +ptpEntityContainedIn OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Contained in" + ::= { ptpEntityEntry 2 } + +ptpEntityClass OBJECT-TYPE + SYNTAX EntityClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EntityClass" + ::= { ptpEntityEntry 3 } + +ptpEntityClassInstanceNumber OBJECT-TYPE + SYNTAX Integer32 (1..32000 | -2147483648) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The class instance number of this entity within the module(card)" + ::= { ptpEntityEntry 4 } + +ptpEntityIndexAid OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name" + ::= { ptpEntityEntry 5 } + +ptpEntityType OBJECT-TYPE + SYNTAX EntityType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of FspR7 entity. Please refer to EntityType for further deails." + ::= { ptpEntityEntry 6 } + +ptpEntityAssignmentState OBJECT-TYPE + SYNTAX AssignmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See AssignmentState." + ::= { ptpEntityEntry 7 } + +ptpEntityEquipmentState OBJECT-TYPE + SYNTAX EquipmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EquipmentState." + ::= { ptpEntityEntry 8 } + +ptpEntityReferencedTo OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "" + ::= { ptpEntityEntry 9 } + +vtpEntityTable OBJECT-TYPE + SYNTAX SEQUENCE OF VtpEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for VTP existing addresses. Entities in this table are either + provisioned, equipped, both of these or neither of these. Containers + are always present in the table as long as their supporting entity + is provisioned or equipped." + ::= { inventoryMib 11 } + +vtpEntityEntry OBJECT-TYPE + SYNTAX VtpEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + vtpEntityIndex + } + ::= { vtpEntityTable 1 } + +VtpEntityEntry ::= SEQUENCE + { vtpEntityIndex EntityIndex, + vtpEntityContainedIn EntityIndex, + vtpEntityClass EntityClass, + vtpEntityClassInstanceNumber Integer32, + vtpEntityIndexAid SnmpAdminString, + vtpEntityType EntityType, + vtpEntityAssignmentState AssignmentState, + vtpEntityEquipmentState EquipmentState, + vtpEntityReferencedTo EntityIndex } + +vtpEntityIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Existing adress index" + ::= { vtpEntityEntry 1 } + +vtpEntityContainedIn OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Contained in" + ::= { vtpEntityEntry 2 } + +vtpEntityClass OBJECT-TYPE + SYNTAX EntityClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EntityClass" + ::= { vtpEntityEntry 3 } + +vtpEntityClassInstanceNumber OBJECT-TYPE + SYNTAX Integer32 (1..32000 | -2147483648) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The class instance number of this entity within the module(card)" + ::= { vtpEntityEntry 4 } + +vtpEntityIndexAid OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name" + ::= { vtpEntityEntry 5 } + +vtpEntityType OBJECT-TYPE + SYNTAX EntityType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The type of FspR7 entity. Please refer to EntityType for further deails." + ::= { vtpEntityEntry 6 } + +vtpEntityAssignmentState OBJECT-TYPE + SYNTAX AssignmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See AssignmentState." + ::= { vtpEntityEntry 7 } + +vtpEntityEquipmentState OBJECT-TYPE + SYNTAX EquipmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EquipmentState." + ::= { vtpEntityEntry 8 } + +vtpEntityReferencedTo OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "" + ::= { vtpEntityEntry 9 } + +controlPlaneOtnEntityTable OBJECT-TYPE + SYNTAX SEQUENCE OF ControlPlaneOtnEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for all existing addresses. Entities in this table are either + provisioned, equipped, both of these or neither of these. Containers + are always present in the table as long as their supporting entity + is provisioned or equipped." + ::= { inventoryMib 12 } + +controlPlaneOtnEntityEntry OBJECT-TYPE + SYNTAX ControlPlaneOtnEntityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Entry for all existing addresses." + INDEX { + controlPlaneOtnEntityIndex + } + ::= { controlPlaneOtnEntityTable 1 } + +ControlPlaneOtnEntityEntry ::= SEQUENCE + { controlPlaneOtnEntityIndex EntityIndex, + controlPlaneOtnEntityContainedIn EntityIndex, + controlPlaneOtnEntityClass CpWdmEntityClass, + controlPlaneOtnEntityClassInstanceNumber Integer32, + controlPlaneOtnEntityIndexAid SnmpAdminString, + controlPlaneOtnEntityAssignmentState AssignmentState } + +controlPlaneOtnEntityIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "Existing adress index" + ::= { controlPlaneOtnEntityEntry 1 } + +controlPlaneOtnEntityContainedIn OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Contained in" + ::= { controlPlaneOtnEntityEntry 2 } + +controlPlaneOtnEntityClass OBJECT-TYPE + SYNTAX CpWdmEntityClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See EntityClass" + ::= { controlPlaneOtnEntityEntry 3 } + +controlPlaneOtnEntityClassInstanceNumber OBJECT-TYPE + SYNTAX Integer32 (1..32000 | -2147483648) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The class instance number of this entity within the module(card)" + ::= { controlPlaneOtnEntityEntry 4 } + +controlPlaneOtnEntityIndexAid OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Name" + ::= { controlPlaneOtnEntityEntry 5 } + +controlPlaneOtnEntityAssignmentState OBJECT-TYPE + SYNTAX AssignmentState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "See AssignmentState." + ::= { controlPlaneOtnEntityEntry 6 } + +controlPlaneOtnContainsTable OBJECT-TYPE + SYNTAX SEQUENCE OF ControlPlaneOtnContainsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Table for all existing addresses. Gives the index of the subtending + entity in the containment." + ::= { inventoryMib 13 } + +controlPlaneOtnContainsEntry OBJECT-TYPE + SYNTAX ControlPlaneOtnContainsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + controlPlaneOtnEntityIndex, + controlPlaneOtnContainsIndex + } + ::= { controlPlaneOtnContainsTable 1 } + +ControlPlaneOtnContainsEntry ::= SEQUENCE + { controlPlaneOtnContainsIndex EntityIndex } + +controlPlaneOtnContainsIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "" + ::= { controlPlaneOtnContainsEntry 1 } + +swDbFileTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwDbFileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { swAdmin 1 } + +swDbFileEntry OBJECT-TYPE + SYNTAX SwDbFileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + swDbFileIndex + } + ::= { swDbFileTable 1 } + +SwDbFileEntry ::= SEQUENCE + { swDbFileIndex EntityIndex, + swDbFileArea FileArea, + swDbFileType FileType, + swDbFileSize Unsigned32, + swDbFileCreationTime DateAndTime, + swDbFileVersion SnmpAdminString, + swDbFileGrade Grade, + swDbFileComment SnmpAdminString, + swDbFileFileName SnmpAdminString, + swDbFileRowStatus RowStatus, + swDbFilePgmType PgmType } + +swDbFileIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Index" + ::= { swDbFileEntry 1 } + +swDbFileArea OBJECT-TYPE + SYNTAX FileArea + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Type of Area" + ::= { swDbFileEntry 2 } + +swDbFileType OBJECT-TYPE + SYNTAX FileType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Type of File" + ::= { swDbFileEntry 3 } + +swDbFileSize OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "Byte" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Size of Memory = USED + AVAILABLE" + ::= { swDbFileEntry 4 } + +swDbFileCreationTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Creation Time" + ::= { swDbFileEntry 5 } + +swDbFileVersion OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "General Release Issue Number of software in the ACT or STBY memory location. Format: XX-YY-Z" + ::= { swDbFileEntry 6 } + +swDbFileGrade OBJECT-TYPE + SYNTAX Grade + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Used to distinguish between NCU capabilities (range of supported services or applications)" + ::= { swDbFileEntry 7 } + +swDbFileComment OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Comment of PGM or DBS files." + ::= { swDbFileEntry 8 } + +swDbFileFileName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "File Name" + ::= { swDbFileEntry 9 } + +swDbFileRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION "RowStatus" + ::= { swDbFileEntry 10 } + +swDbFilePgmType OBJECT-TYPE + SYNTAX PgmType + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Program Type" + ::= { swDbFileEntry 11 } + +fwDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF FwDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { swAdmin 2 } + +fwDataEntry OBJECT-TYPE + SYNTAX FwDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + entityIndex + } + ::= { fwDataTable 1 } + +FwDataEntry ::= SEQUENCE + { fwDataNewVersion SnmpAdminString, + fwDataStandbyVersion SnmpAdminString, + fwDataServiceImpairment ServiceAffecting, + fwDataBootStatus BootState, + fwDataFirmwarePackageRev SnmpAdminString, + fwDataStandbyServiceImpairment StandbyServiceAffecting, + fwDataFirmwareAvailable NoYesNA, + fwDataFirmwareApproved NoYesNA, + fwDataFirmwarePackageRevBackup SnmpAdminString, + fwDataReadyForActivation YesNoNA, + fwDataActivationReadyOnStandby YesNoNA, + fwDataProtectionPart FspR7YesNo, + fwDataForm ModuleForm, + fwDataStandbyFirmwareAvailable NoYesNA } + +fwDataNewVersion OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "New Firmware Package Revision Number of file which resides on ACT PGM partition." + ::= { fwDataEntry 1 } + +fwDataStandbyVersion OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "New Firmware Package Revision Number of file which resides on STBY PGM partition." + ::= { fwDataEntry 2 } + +fwDataServiceImpairment OBJECT-TYPE + SYNTAX ServiceAffecting + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Affecting Change during FWP upgrade and Restart operation" + ::= { fwDataEntry 3 } + +fwDataBootStatus OBJECT-TYPE + SYNTAX BootState + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Boot State. Every state change (excluding IDLE) does generate a corresponding transient condition." + ::= { fwDataEntry 4 } + +fwDataFirmwarePackageRev OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Active Firmware Package Revision Number of module software." + ::= { fwDataEntry 5 } + +fwDataStandbyServiceImpairment OBJECT-TYPE + SYNTAX StandbyServiceAffecting + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Affecting Change during FWP upgrade after activation of STBY PGM partition." + ::= { fwDataEntry 6 } + +fwDataFirmwareAvailable OBJECT-TYPE + SYNTAX NoYesNA + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Firmware package for module available for ACT-PGM" + ::= { fwDataEntry 7 } + +fwDataFirmwareApproved OBJECT-TYPE + SYNTAX NoYesNA + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Firmware package update for Encryption module is approved by Crypto Officer" + ::= { fwDataEntry 8 } + +fwDataFirmwarePackageRevBackup OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Standby Firmware Package Revision Number, Format XX.YY.ZZ (X,Y,Z are decimal characters, leading 0 are omitted)." + ::= { fwDataEntry 9 } + +fwDataReadyForActivation OBJECT-TYPE + SYNTAX YesNoNA + MAX-ACCESS read-only + STATUS current + DESCRIPTION "FWPREV-STBY == FWPREV-SYS-ACT" + ::= { fwDataEntry 10 } + +fwDataActivationReadyOnStandby OBJECT-TYPE + SYNTAX YesNoNA + MAX-ACCESS read-only + STATUS current + DESCRIPTION "FWPREV-STBY == FWPREV-SYS-STBY" + ::= { fwDataEntry 11 } + +fwDataProtectionPart OBJECT-TYPE + SYNTAX FspR7YesNo + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Module is active part of Channel Card Protection Group." + ::= { fwDataEntry 12 } + +fwDataForm OBJECT-TYPE + SYNTAX ModuleForm + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Form of module" + ::= { fwDataEntry 13 } + +fwDataStandbyFirmwareAvailable OBJECT-TYPE + SYNTAX NoYesNA + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Firmware package for module available for STBY-PGM" + ::= { fwDataEntry 14 } + +coldRestartCapTable OBJECT-TYPE + SYNTAX SEQUENCE OF ColdRestartCapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { swAdmin 3 } + +coldRestartCapEntry OBJECT-TYPE + SYNTAX ColdRestartCapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + entityIndex + } + ::= { coldRestartCapTable 1 } + +ColdRestartCapEntry ::= SEQUENCE + { coldRestartCapServiceAffectingCap ServiceAffectingCaps } + +coldRestartCapServiceAffectingCap OBJECT-TYPE + SYNTAX ServiceAffectingCaps + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Affecting Change during FWP upgrade and Restart operation" + ::= { coldRestartCapEntry 1 } + +eqpFwUpgradeRequest OBJECT-TYPE + SYNTAX CommandEqpt + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Update, Install and Reboot commands." + ::= { swAdmin 10 } + +eqpFwServiceImpairment OBJECT-TYPE + SYNTAX ServiceAffecting + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Service Affecting Change during FWP upgrade and Restart operation" + ::= { swAdmin 11 } + +eqpFwNextEqpForUpdate OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The valid address of physically available Equipment part." + ::= { swAdmin 12 } + +eqpFwEqpType OBJECT-TYPE + SYNTAX FspR7EquipmentType + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)" + ::= { swAdmin 13 } + +eqpFwNcuServerBusy OBJECT-TYPE + SYNTAX FspR7FalseTrue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "NCU SW download busy" + ::= { swAdmin 14 } + +eqpFwEqpServerBusy OBJECT-TYPE + SYNTAX FspR7FalseTrue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Firmware package download busy" + ::= { swAdmin 15 } + +updateEqpt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of equipment which have to be updated" + ::= { swAdmin 16 } + +installedEqpt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of equipment is already installed" + ::= { swAdmin 17 } + +selectedFile OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "File Name" + ::= { swAdmin 18 } + +ncuActivationDate OBJECT-TYPE + SYNTAX FspR7Date + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Activation Date in local time. Format: YY-MM-DD" + ::= { swAdmin 19 } + +ncuActivationTime OBJECT-TYPE + SYNTAX FspR7Time + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Activation Time in local time. Format HH-MM-SS" + ::= { swAdmin 20 } + +ncuScheduledActivation OBJECT-TYPE + SYNTAX NcuAutoActivation + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Enable scheduled activation of the standby PGM partition." + ::= { swAdmin 21 } + +ncuScheduledDbRestore OBJECT-TYPE + SYNTAX RestoreActivation + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Shows whether scheduled activtion will be a database restore or a new software activation" + ::= { swAdmin 22 } + +encryptionFwpFile OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The name FWP for encryption capable modules." + ::= { swAdmin 23 } + +clearRdiskRequest OBJECT-TYPE + SYNTAX INTEGER + { + undefined(0), + active(1), + inactive(2) + } + + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This object initiate RDISK clearance." + ::= { swAdmin 24 } + +ncuActivationDateUtc OBJECT-TYPE + SYNTAX FspR7Date + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Activation Date Format: YY-MM-DD" + ::= { swAdmin 25 } + +ncuActivationTimeUtc OBJECT-TYPE + SYNTAX FspR7Time + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Activation Time Format: HH-MM-SS" + ::= { swAdmin 26 } + +neBackupEncryption OBJECT-TYPE + SYNTAX EnableState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Allows the database backup file to be encrypted with a user specified password." + ::= { swAdmin 38 } + +neBackupPassword OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Secret, case-sensitive password to for encryption" + ::= { swAdmin 39 } + +neF7AutomaticRemoteBackupEncryption OBJECT-TYPE + SYNTAX EnableState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Allows the database backup file to be encrypted with a user specified password." + ::= { swAdmin 40 } + +neF7AutomaticRemoteBackupPassword OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Secret, case-sensitive password to for encryption" + ::= { swAdmin 41 } + +neBackupUsers OBJECT-TYPE + SYNTAX FspR7UsersDb + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies how user accounts are handled for database operations" + ::= { swAdmin 42 } + +neInitialConnectionMode OBJECT-TYPE + SYNTAX FspR7EnableDisable + MAX-ACCESS read-write + STATUS current + DESCRIPTION "NCU C1 Auto Connect/DHCP Mode will offer DHCP leases to the user's device." + ::= { swAdmin 43 } + +neF7AutomaticRemoteBackupUsers OBJECT-TYPE + SYNTAX FspR7UsersDb + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Specifies how user accounts are handled for database operations" + ::= { swAdmin 44 } + +neRestoreConfig OBJECT-TYPE + SYNTAX RestoreActivation + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Shows whether the last activation was(will be) a database restore or a new software activation" + ::= { dbAdmin 1 } + +swDbDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwDbDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { dbAdmin 2 } + +swDbDataEntry OBJECT-TYPE + SYNTAX SwDbDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + swDbDataIndex + } + ::= { swDbDataTable 1 } + +SwDbDataEntry ::= SEQUENCE + { swDbDataIndex EntityIndex, + swDbDataArea FileArea, + swDbDataProgramVersion SnmpAdminString, + swDbDataDatabaseVersion SnmpAdminString, + swDbDataActivationTime DateAndTime, + swDbDataRestoreConfig RestoreActivation, + swDbDataFirmwareSetVersion SnmpAdminString, + swDbDataNcuSoftwareVersion SnmpAdminString, + swDbDataStandbyPartitionStatus PartitionStatus, + swDbDataNumEqpt Unsigned32, + swDbDataNumLegacyEqpt Unsigned32, + swDbDataNumNativeSaUpdate Unsigned32, + swDbDataNumNativeNsaUpdate Unsigned32, + swDbDataNumLegacyUpdate Unsigned32, + swDbDataNumSaNotReady Unsigned32, + swDbDataNumNsaNotReady Unsigned32 } + +swDbDataIndex OBJECT-TYPE + SYNTAX EntityIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Index" + ::= { swDbDataEntry 1 } + +swDbDataArea OBJECT-TYPE + SYNTAX FileArea + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Type of Area" + ::= { swDbDataEntry 2 } + +swDbDataProgramVersion OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "General Release Issue Number of software in the ACT or STBY memory location. Format: XX-YY-Z" + ::= { swDbDataEntry 3 } + +swDbDataDatabaseVersion OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "General Release Issue Number of Database in the ACT or STBY memory location. Typically this will be the same as the GISSUE." + ::= { swDbDataEntry 4 } + +swDbDataActivationTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Activation Time" + ::= { swDbDataEntry 5 } + +swDbDataRestoreConfig OBJECT-TYPE + SYNTAX RestoreActivation + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Shows whether the last activation was(will be) a database restore or a new software activation" + ::= { swDbDataEntry 6 } + +swDbDataFirmwareSetVersion OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Firmware Package Set Version" + ::= { swDbDataEntry 7 } + +swDbDataNcuSoftwareVersion OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "NCU Software Version ACT or STBY memory location. Format: XX-YY-Z" + ::= { swDbDataEntry 8 } + +swDbDataStandbyPartitionStatus OBJECT-TYPE + SYNTAX PartitionStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Partition State" + ::= { swDbDataEntry 9 } + +swDbDataNumEqpt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of all provisioned and equipped equipment in system" + ::= { swDbDataEntry 10 } + +swDbDataNumLegacyEqpt OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of all legacy provisioned and equipped modules in system," + ::= { swDbDataEntry 11 } + +swDbDataNumNativeSaUpdate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of all native modules which have to be updated (SA), both with already properly installed pak on standby image and those which need installation." + ::= { swDbDataEntry 12 } + +swDbDataNumNativeNsaUpdate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of all modules which have to be updated (NSA),both with already properly installed pak on standby image and those which need installation." + ::= { swDbDataEntry 13 } + +swDbDataNumLegacyUpdate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of all legacy modules which have to be updated." + ::= { swDbDataEntry 14 } + +swDbDataNumSaNotReady OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of modules which can be updated with a service affecting (SA) firmware package." + ::= { swDbDataEntry 15 } + +swDbDataNumNsaNotReady OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of modules which can be updated with a non-service affecting (NSA) firmware package." + ::= { swDbDataEntry 16 } + +swDbDataCapTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwDbDataCapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { dbAdmin 3 } + +swDbDataCapEntry OBJECT-TYPE + SYNTAX SwDbDataCapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + swDbDataCapUpgradeRequest + } + ::= { swDbDataCapTable 1 } + +SwDbDataCapEntry ::= SEQUENCE + { swDbDataCapUpgradeRequest INTEGER, + swDbDataCapRestoreConfig RestoreActivationCaps } + +swDbDataCapUpgradeRequest OBJECT-TYPE + SYNTAX INTEGER + { + undefined(0), + none(1), + download(2), + install(3), + activate(4), + revertToPrevious(5), + reboot(6), + downloadInstallActivateReboot(7), + installActivateReboot(8), + revertToPreviousReboot(9), + activateAlp(10), + activateDefaultAlp(11), + upload(12), + autoDownloadInstall(13), + autoInstall(14), + fwpInstall(15), + fwpDownloadInstall(16), + downloadCf(17), + uploadCf(18), + installCf(19), + autoInstallCf(20), + uploadPa(21), + activateWithFwp(22), + forceReboot(23), + stbyFwpInstall(24) + } + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Index value is a requested upgrade type from neSwUpgradeRequest object, + where following values are applicable: + - install(3) + - activate(4) + - reboot(6) + - activateAlp(10) + - activateDefaultAlp(11)" + ::= { swDbDataCapEntry 1 } + +swDbDataCapRestoreConfig OBJECT-TYPE + SYNTAX RestoreActivationCaps + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Shows whether the last activation was(will be) a database restore or a new software activation" + ::= { swDbDataCapEntry 2 } + +swDbDataDefaultsTable OBJECT-TYPE + SYNTAX SEQUENCE OF SwDbDataDefaultsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { dbAdmin 4 } + +swDbDataDefaultsEntry OBJECT-TYPE + SYNTAX SwDbDataDefaultsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + swDbDataDefaultsUpgradeRequest + } + ::= { swDbDataDefaultsTable 1 } + +SwDbDataDefaultsEntry ::= SEQUENCE + { swDbDataDefaultsUpgradeRequest INTEGER, + swDbDataDefaultsRestoreConfig RestoreActivation } + +swDbDataDefaultsUpgradeRequest OBJECT-TYPE + SYNTAX INTEGER + { + undefined(0), + none(1), + download(2), + install(3), + activate(4), + revertToPrevious(5), + reboot(6), + downloadInstallActivateReboot(7), + installActivateReboot(8), + revertToPreviousReboot(9), + activateAlp(10), + activateDefaultAlp(11), + upload(12), + autoDownloadInstall(13), + autoInstall(14), + fwpInstall(15), + fwpDownloadInstall(16), + downloadCf(17), + uploadCf(18), + installCf(19), + autoInstallCf(20), + uploadPa(21), + activateWithFwp(22), + forceReboot(23), + stbyFwpInstall(24) + } + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Index value is a requested upgrade type from neSwUpgradeRequest object, + where following values are applicable: + - install(3) + - activate(4) + - reboot(6) + - activateAlp(10) + - activateDefaultAlp(11)" + ::= { swDbDataDefaultsEntry 1 } + +swDbDataDefaultsRestoreConfig OBJECT-TYPE + SYNTAX RestoreActivation + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Shows whether the last activation was(will be) a database restore or a new software activation" + ::= { swDbDataDefaultsEntry 2 } + +snmpServerPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The TCP or UDP port on which a server is listening" + ::= { snmpAgent 2 } + +snmpProxyServerAdminState OBJECT-TYPE + SYNTAX FspR7AdminStateSnmpProxy + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted." + ::= { snmpAgent 3 } + +snmpProxyServerPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The TCP or UDP port on which a server is listening" + ::= { snmpAgent 4 } + +snmpProxyServerSynchroState OBJECT-TYPE + SYNTAX SnmpProxySynchronizationState + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This parameter is used to synchronize proxy table on GNE with destination NE's + availability." + ::= { snmpAgent 5 } + +snmpProxyServerSynchroStage OBJECT-TYPE + SYNTAX SnmpProxySynchronizationStage + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "This parameter is used to indicate stage of synchronization process." + ::= { snmpAgent 6 } + +snmpProxyEntrySingleTargetOutTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnmpProxyEntrySingleTargetOutEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { snmpAgent 10 } + +snmpProxyEntrySingleTargetOutEntry OBJECT-TYPE + SYNTAX SnmpProxyEntrySingleTargetOutEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + INDEX { + snmpProxyEntrySingleTargetOutAddress, + snmpProxyEntrySingleTargetOutPort + } + ::= { snmpProxyEntrySingleTargetOutTable 1 } + +SnmpProxyEntrySingleTargetOutEntry ::= SEQUENCE + { snmpProxyEntrySingleTargetOutAddress IpAddress, + snmpProxyEntrySingleTargetOutPort Unsigned32, + snmpProxyEntrySingleTargetOutNodeAgentStatus DestinationNodeOrAgentState, + snmpProxyEntrySingleTargetOutContext SnmpAdminString, + snmpProxyEntrySingleTargetOutRowStatus RowStatus, + snmpProxyEntrySingleTargetOutAdminState FspR7AdminStateSnmpProxy, + snmpProxyEntrySingleTargetOutUserName SnmpAdminString } + +snmpProxyEntrySingleTargetOutAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "IP Address assigned to LAN IP Interface" + ::= { snmpProxyEntrySingleTargetOutEntry 1 } + +snmpProxyEntrySingleTargetOutPort OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The destination port" + ::= { snmpProxyEntrySingleTargetOutEntry 2 } + +snmpProxyEntrySingleTargetOutNodeAgentStatus OBJECT-TYPE + SYNTAX DestinationNodeOrAgentState + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION "" + ::= { snmpProxyEntrySingleTargetOutEntry 3 } + +snmpProxyEntrySingleTargetOutContext OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The contextName used in SNMP messages to an SNMP Proxy Forwarder to indicate for which SNMP Proxy Client the SNMP messages is meant" + ::= { snmpProxyEntrySingleTargetOutEntry 4 } + +snmpProxyEntrySingleTargetOutRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION "RowStatus" + ::= { snmpProxyEntrySingleTargetOutEntry 5 } + +snmpProxyEntrySingleTargetOutAdminState OBJECT-TYPE + SYNTAX FspR7AdminStateSnmpProxy + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted." + ::= { snmpProxyEntrySingleTargetOutEntry 6 } + +snmpProxyEntrySingleTargetOutUserName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The name string for user authentication purposes" + ::= { snmpProxyEntrySingleTargetOutEntry 7 } + + +END |