summaryrefslogtreecommitdiff
path: root/MIBS/adva/F3-SYNC-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/adva/F3-SYNC-MIB')
-rw-r--r--MIBS/adva/F3-SYNC-MIB1689
1 files changed, 1689 insertions, 0 deletions
diff --git a/MIBS/adva/F3-SYNC-MIB b/MIBS/adva/F3-SYNC-MIB
new file mode 100644
index 0000000..15d1e3e
--- /dev/null
+++ b/MIBS/adva/F3-SYNC-MIB
@@ -0,0 +1,1689 @@
+F3-SYNC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32
+ FROM SNMPv2-SMI
+ DisplayString, TruthValue, RowStatus, StorageType, VariablePointer,DateAndTime,
+ TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ neIndex, shelfIndex, slotIndex
+ FROM CM-ENTITY-MIB
+ fsp150cm
+ FROM ADVA-MIB
+ AdminState, OperationalState, SecondaryState, F3DisplayString, RestartType
+ FROM CM-COMMON-MIB
+ CmGenPgSwitchoverReason
+ FROM CM-REDUNDANCY-MIB;
+
+f3SyncMIB MODULE-IDENTITY
+ LAST-UPDATED "202001150000Z"
+ ORGANIZATION "ADVA Optical Networking SE"
+ CONTACT-INFO
+ "Web URL: http://adva.com/
+ E-mail: support@adva.com
+ Postal: ADVA Optical Networking SE
+ Campus Martinsried
+ Fraunhoferstrasse 9a
+ 82152 Martinsried/Munich
+ Germany
+ Phone: +49 089 89 06 65 0
+ Fax: +49 089 89 06 65 199 "
+ DESCRIPTION "
+
+ Notes from release 202001150000Z
+ (1) Added f3TimeClockPhaseAdjust
+
+ Notes from release 201909110000Z,
+ (1) New textual conventions:
+ ClkSignalType
+
+ Notes from release 201907080000Z,
+ (1) Added f3TimeClockAtoiCurrentOffset, f3TimeClockAtoiJumpSeconds,
+ f3TimeClockAtoiTimeOfNextJump, f3TimeClockAtoiDisplayName
+
+ Notes from release 201901230000Z,
+ (1) Added table indices:
+ f3SyncProtGroupIndex in f3SyncProtMemberEntry,
+ f3TimeClockProtGroupIndex in f3TimeClockProtMemberEntry
+
+ Notes from release 201807300000Z,
+ (1) New tables:
+ f3SyncProtGroupTable, f3SyncProtMemberTable,
+ f3TimeClockProtGroupTable, f3TimeClockProtMemberTable
+
+ Notes from release 201901070000Z
+ (1) Added f3TimeClockTimeHoldoverTimeout
+ (2) Added f3TimeClockTimeInHoldover
+
+
+
+ Notes from release 201802210000Z,
+ (1) Added table: f3PrcTable
+ (2) New textual conventions:
+ SsmMode and AcknowledgeType
+
+ Notes from release 201304240000Z,
+ (1) New tables: f3TimeClockTable, f3TimeClockRefTable
+
+ Notes from release 201003250000Z,
+ (1)f3SyncTable has new objects
+ f3SyncSelectionMode,
+ f3SyncWaitToRestoreTime, f3SyncOperationSyncRef,
+ f3SyncOperationType,
+ (2)f3SyncRefTable has new object
+ f3SyncRefOperationType
+
+ Notes from release 201002120000Z,
+ (1)f3SyncTable has new objects f3SyncAlias, f3SyncDomain
+ (2)f3SyncRefTable has new objects
+ f3SyncRefAlias, f3SyncRefEffectiveQL
+
+ Notes from release 200903190000Z,
+ (1)MIB version ready for release of FSP150CC devices GE101 and GE206."
+ ::= {fsp150cm 12}
+
+--
+-- OID definitions
+--
+f3SyncObjects OBJECT IDENTIFIER ::= {f3SyncMIB 1}
+f3SyncConformance OBJECT IDENTIFIER ::= {f3SyncMIB 2}
+
+--
+-- Textual Conventions
+--
+NetworkClockType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Network Clock Type.
+ option1 - represents an SDH regional clock type,
+ option2 - represents a SONET regional clock type."
+ SYNTAX INTEGER {
+ option1 (1),
+ option2 (2)
+ }
+
+ClockMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Clock Mode.
+ freerun - Free Run,
+ holdover - Hold over,
+ tracking - Tracking,
+ lossoflock - Loss of Lock,
+ locked - Locked,
+ bypass - the frequency entity is not functioning and is being bypassed. One of its frequency inputs is externally selected to be used directly as the frequency output."
+ SYNTAX INTEGER {
+ notAvailable(0),
+ freerun (1),
+ holdover (2),
+ tracking (3),
+ lossoflock (4),
+ locked (5),
+ bypass(6)
+ }
+
+SSMQualityLevel ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Sync Status Messages Quality Level"
+ SYNTAX INTEGER {
+ not-applicable(0),
+ ql-dnu (1),
+ ql-eec1 (2),
+ ql-eec2 (3),
+ ql-inv (4),
+ ql-inv0 (5),
+ ql-inv1 (6),
+ ql-inv2 (7),
+ ql-inv3 (8),
+ ql-inv5 (9),
+ ql-inv7 (10),
+ ql-inv8 (11),
+ ql-inv9 (12),
+ ql-inv10 (13),
+ ql-inv11 (14),
+ ql-inv12 (15),
+ ql-none (16),
+ ql-nsupp (17),
+ ql-prc (18),
+ ql-prov (19),
+ ql-prs (20),
+ ql-smc (21),
+ ql-ssu-a (22),
+ ql-ssu-b (23),
+ ql-st2 (24),
+ ql-st3e (25),
+ ql-stu (26),
+ ql-tnc (27),
+ ql-unc (28),
+ --
+ ql-failed(29),
+ ql-inv6(30),
+ ql-inv13(31),
+ ql-inv14(32),
+ ql-dus (33),
+ ql-na (34)
+
+ }
+
+SyncRefStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Sync Reference status,
+ ref-ok,
+ ref-failed."
+ SYNTAX INTEGER {
+ not-applicable(0),
+ ref-ok(1),
+ ref-failed(2),
+ ref-freq-ok(3)
+ }
+
+SyncRefState ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Sync Reference state,
+ active,
+ standby,
+ unavailable."
+ SYNTAX INTEGER {
+ not-applicable(0),
+ active(1),
+ standby(2),
+ unavailable(3),
+ lockedout(4)
+ }
+
+SyncDomainType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Sync Domain type,
+ chassis,
+ linecard."
+ SYNTAX INTEGER {
+ chassis(1), -- applicable to Hub Shelf/Line Cards sync entities
+ linecard(2) -- applicable for NIDs and Line Cards
+ }
+
+SyncOperationType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Sync Operation Type,
+ none - No action,
+ forcedswitch - can be used to override the currently selected reference, assuming
+ the the chosen reference is not locked out. A forced switch
+ overrides a manual switch and subsequent forced switch preempts
+ a previous forced switch. A forced switch request to a reference
+ which is in SF state or has a QL of DL-DNU when QL mode=Enabled
+ will result in the clock selector entering holdover.
+ manualswitch - can be used to switch to a reference, overriding the currently
+ selected reference assuming a forced switch is not active
+ on a reference other than chosen reference; it is not locked out,
+ not in SF state, has a QL not QL-DNU and has the highest
+ available QL. A manual switch request can only be used to
+ override the assigned reference priorities.
+ A manual switch request overrides a previous manual switch.
+ lockout - sets the state of reference to locked-out, it is no longer
+ considered available by the selection process,
+ clearwtr - causes any active Wait to Restore timer for the reference,
+ clearlockout - causes the reference to be considered available again by
+ the selection process,
+ clearswitch."
+ SYNTAX INTEGER {
+ none(1),
+ forcedswitch(2),
+ manualswitch(3),
+ lockout(4),
+ clearwtr(5),
+ clearlockout(6),
+ clearswitch(7)
+ }
+
+SyncSelectionMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Sync Selection Mode,
+ ql-mode,
+ priority-mode."
+ SYNTAX INTEGER {
+ ql-mode(1),
+ priority-mode(2)
+ }
+
+TimeScale ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Time Scale,
+ ptp,
+ arb."
+ SYNTAX INTEGER {
+ ptp(1),
+ arb(2)
+ }
+
+TODSource ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for ARB ToD Source,
+ na,
+ system-tod,
+ manual."
+ SYNTAX INTEGER {
+ na(1),
+ system-tod(2),
+ manual(3)
+ }
+
+SquelchControl ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Describes the Squelch Control of the PTP ports."
+ SYNTAX INTEGER {
+ never(1),
+ holdover (2),
+ lock (3),
+ squelch-ql(4)
+ }
+
+TimeClockMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Time Clock Mode.
+ freerun - Free Run,
+ warmup - Warm Up,
+ tracking - Tracking,
+ transition - Transition,
+ holdover - Holdover,
+ locked - Locked."
+ SYNTAX INTEGER {
+ freerun (1),
+ warmup (2),
+ tracking (3),
+ transition (4),
+ holdover (5),
+ locked (6)
+ }
+
+TimeTraceAbilityStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Describes the time trace ability status."
+ SYNTAX INTEGER {
+ notTraceAble (1),
+ timeLocked (2),
+ timeFreqLock (3),
+ timeHoldover (4)
+ }
+
+HoldoverAccuracy ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION ""
+ SYNTAX INTEGER {
+ time-500ns(1),
+ time-1000ns(2),
+ time-1500ns(3),
+ time-5000ns(4),
+ time-10000ns(5)
+ }
+
+TimeHoldoverPerformance ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION ""
+ SYNTAX INTEGER {
+ time-500ns(1),
+ time-1000ns(2),
+ time-1500ns(3),
+ time-5000ns(4),
+ time-10000ns(5),
+ time-0ns(6),
+ time-100ns(7),
+ na(8)
+ }
+
+TimeSource ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Time Source,
+ atomic, gps, ptp,
+ internal, other."
+ SYNTAX INTEGER {
+ atomic(1),
+ gps(2),
+ ptp(3),
+ internal(4),
+ other(5)
+ }
+
+PLLBw ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Clock PLL Bandwidth,
+ eec,
+ ssu."
+ SYNTAX INTEGER {
+ eec(1),
+ ssu(2)
+ }
+
+SsmMode ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for SSM Mode,
+ enabled or disabled."
+ SYNTAX INTEGER {
+ enabled(1),
+ disbled(2)
+ }
+
+AcknowledgeType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Acknowledgement Type."
+ SYNTAX INTEGER {
+ no-action(1),
+ accuracy-adjust(2)
+ }
+
+ClkSignalType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Enumerations for Clk Signal Type,
+ 10mhz,
+ 2048khz."
+ SYNTAX INTEGER {
+ not-applicable(0),
+ freq-10mhz(1),
+ freq-2048khz(2)
+ }
+--
+-- Sync Table
+--
+f3SyncTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3SyncEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A list of entries corresponding to the Sync entities."
+ ::= { f3SyncObjects 1 }
+
+f3SyncEntry OBJECT-TYPE
+ SYNTAX F3SyncEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry containing information applicable to a particular
+ Sync Entity."
+ INDEX { neIndex, shelfIndex, slotIndex, f3SyncIndex }
+ ::= { f3SyncTable 1 }
+
+F3SyncEntry ::= SEQUENCE {
+ f3SyncIndex Integer32,
+
+ f3SyncAdminState AdminState,
+ f3SyncOperationalState OperationalState,
+ f3SyncSecondaryState SecondaryState,
+
+ f3SyncNetworkClockType NetworkClockType,
+ f3SyncSelectedReference VariablePointer,
+ f3SyncClockMode ClockMode,
+ f3SyncQL SSMQualityLevel,
+
+ -- new columns added for R4.3CC
+ f3SyncAlias DisplayString,
+ f3SyncDomain SyncDomainType,
+ f3SyncSelectionMode SyncSelectionMode,
+ f3SyncWaitToRestoreTime Integer32,
+ f3SyncOperationSyncRef VariablePointer,
+ f3SyncOperationType SyncOperationType,
+ f3SyncPLLBw PLLBw
+ }
+
+f3SyncIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Unique index value associated with the Synchronization Entity."
+ ::= { f3SyncEntry 1 }
+
+f3SyncAdminState OBJECT-TYPE
+ SYNTAX AdminState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object represents the Administrative State of the Sync
+ Entity."
+ ::= { f3SyncEntry 2 }
+
+f3SyncOperationalState OBJECT-TYPE
+ SYNTAX OperationalState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object represents the Operational State of the Sync
+ Entity."
+ ::= { f3SyncEntry 3 }
+
+f3SyncSecondaryState OBJECT-TYPE
+ SYNTAX SecondaryState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object represents the Secondary State of the Sync
+ Entity."
+ ::= { f3SyncEntry 4 }
+
+f3SyncNetworkClockType OBJECT-TYPE
+ SYNTAX NetworkClockType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object represents the regional clock type for
+ the system. This object determines which QL codes are
+ supported."
+ ::= { f3SyncEntry 5 }
+
+f3SyncSelectedReference OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the source of the currently selected
+ Sync reference. This would be the OID of the actual entity (bits port,
+ traffic port etc.).
+ An OID value of {0 0} represents internal clock."
+ ::= { f3SyncEntry 6 }
+
+f3SyncClockMode OBJECT-TYPE
+ SYNTAX ClockMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the system clock mode."
+ ::= { f3SyncEntry 7 }
+
+f3SyncQL OBJECT-TYPE
+ SYNTAX SSMQualityLevel
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the QL of the system reference.
+ This is the value for each external reference's Transmit
+ QL attribute unless it should be transmitting QL-DNU."
+ ::= { f3SyncEntry 8 }
+
+f3SyncAlias OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..256))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "This object allows SNMP management entities to provide an
+ alias to the Sync entity."
+ ::= { f3SyncEntry 9 }
+
+f3SyncDomain OBJECT-TYPE
+ SYNTAX SyncDomainType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object represents the Sync entity's domain type. A Sync entity can be in
+ chassis (system) domain (applicable for HUB shelf and Aggregation shelf)
+ or line card domain (applicable for HUB shelf, Aggregation shelf as well as
+ NIDs)."
+ ::= { f3SyncEntry 10 }
+
+f3SyncSelectionMode OBJECT-TYPE
+ SYNTAX SyncSelectionMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object represents the Sync entity's selection mode.
+ If this mode is configured as ql-mode, the selection of
+ which reference should be used shall be based upon the
+ reference's Quality Level. The highest received
+ Quality Level shall be the selected reference. The priority
+ shall only be used to distinguish between references with the
+ same received QL. When multiple references have the same QL
+ and same priority, the behavior of selection process within
+ the group is non-revertive.
+ If this mode is configued as priority-mode, the selection
+ of which reference should be used shall be based upon
+ the reference's priority (i.e. QL is disabled). When
+ multiple references have the same priority, the behavior of
+ selection process within the group is non-revertive."
+ ::= { f3SyncEntry 11 }
+
+f3SyncWaitToRestoreTime OBJECT-TYPE
+ SYNTAX Integer32 (0..12)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows configuration of the Sync entity's wait-to-restore
+ time (in minutes). A value of 0 disables WTR timers for all references."
+ ::= { f3SyncEntry 12 }
+
+f3SyncOperationSyncRef OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows configuration of the Object Identifier of the
+ Sync Reference Entity on which the f3SyncOperationType is performed.
+ A value of 0.0 denotes no sync reference is chosen for operation."
+ ::= { f3SyncEntry 13 }
+
+f3SyncOperationType OBJECT-TYPE
+ SYNTAX SyncOperationType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows to perform the specified operation on the Sync Reference
+ specified by f3SyncOperationSyncRef."
+ ::= { f3SyncEntry 14 }
+
+f3SyncPLLBw OBJECT-TYPE
+ SYNTAX PLLBw
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows configuration of the Sync entity's Clock PLL Bandwidth."
+ ::= { f3SyncEntry 15 }
+
+--
+-- Sync Reference Table
+--
+f3SyncRefTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3SyncRefEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A list of entries corresponding to the Sync Reference entities."
+ ::= { f3SyncObjects 2 }
+
+f3SyncRefEntry OBJECT-TYPE
+ SYNTAX F3SyncRefEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry containing information applicable to a particular
+ Sync Reference Entity."
+ INDEX { neIndex, shelfIndex, slotIndex, f3SyncIndex, f3SyncRefIndex }
+ ::= { f3SyncRefTable 1 }
+
+F3SyncRefEntry ::= SEQUENCE {
+ f3SyncRefIndex Integer32,
+ f3SyncRefReference VariablePointer,
+ f3SyncRefPriority Integer32,
+ f3SyncRefStatus SyncRefStatus,
+ f3SyncRefState SyncRefState,
+ f3SyncRefReceivedQL SSMQualityLevel,
+ f3SyncRefStorageType StorageType,
+ f3SyncRefRowStatus RowStatus,
+ -- new columns added for R4.3CC
+ f3SyncRefAlias DisplayString,
+ f3SyncRefEffectiveQL SSMQualityLevel,
+ f3SyncRefOperationType SyncOperationType
+ }
+
+f3SyncRefIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Unique index value associated with the Sync Reference Entity."
+ ::= { f3SyncRefEntry 1 }
+
+f3SyncRefReference OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "This object represents the external sync reference to be
+ used as system clock reference source."
+ ::= { f3SyncRefEntry 2 }
+
+f3SyncRefPriority OBJECT-TYPE
+ SYNTAX Integer32 (1..10)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "This object represents the priority of the external sync reference
+ to be used as system clock reference source. This value is
+ not mandatory when a single clock reference source is supported.
+ Lower priority value indicates higher priority."
+ ::= { f3SyncRefEntry 3 }
+
+f3SyncRefStatus OBJECT-TYPE
+ SYNTAX SyncRefStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the sync reference status."
+ ::= { f3SyncRefEntry 4 }
+
+f3SyncRefState OBJECT-TYPE
+ SYNTAX SyncRefState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the sync reference state."
+ ::= { f3SyncRefEntry 5 }
+
+f3SyncRefReceivedQL OBJECT-TYPE
+ SYNTAX SSMQualityLevel
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the sync reference received QL."
+ ::= { f3SyncRefEntry 6 }
+
+f3SyncRefStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "The type of storage configured for this entry."
+ ::= { f3SyncRefEntry 7 }
+
+f3SyncRefRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "The status of this row. An entry MUST NOT exist in the
+ active state unless all objects in the entry have an
+ appropriate value, as described
+ in the description clause for each writable object.
+
+ The values of f3SyncRefRowStatus supported are
+ createAndGo(4) and destroy(6). All mandatory attributes
+ must be specified in a single SNMP SET request with
+ f3SyncRefRowStatus value as createAndGo(4).
+ Upon successful row creation, this object has a
+ value of active(1).
+
+ The f3SyncRefRowStatus object may be modified if
+ the associated instance of this object is equal to active(1)."
+ ::= { f3SyncRefEntry 8 }
+
+f3SyncRefAlias OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..256))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "This object allows SNMP management entities to provide an
+ alias to the Sync Reference entity."
+ ::= { f3SyncRefEntry 9 }
+
+f3SyncRefEffectiveQL OBJECT-TYPE
+ SYNTAX SSMQualityLevel
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the sync reference effective QL."
+ ::= { f3SyncRefEntry 10 }
+
+f3SyncRefOperationType OBJECT-TYPE
+ SYNTAX SyncOperationType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides information on the current/active operation
+ on this sync reference."
+ ::= { f3SyncRefEntry 11 }
+
+--
+-- Time Clock Table
+--
+f3TimeClockTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3TimeClockEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A list of entries corresponding to the Time Clock entities."
+ ::= { f3SyncObjects 3 }
+
+f3TimeClockEntry OBJECT-TYPE
+ SYNTAX F3TimeClockEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry containing information applicable to a particular
+ Time Clock Entity."
+ INDEX { neIndex, shelfIndex, slotIndex, f3TimeClockIndex }
+ ::= { f3TimeClockTable 1 }
+
+F3TimeClockEntry ::= SEQUENCE {
+ f3TimeClockIndex Integer32,
+ f3TimeClockAlias F3DisplayString,
+ f3TimeClockAdminState AdminState,
+ f3TimeClockOperationalState OperationalState,
+ f3TimeClockSecondaryState SecondaryState,
+ f3TimeClockSelectedReference VariablePointer,
+ f3TimeClockClockMode TimeClockMode,
+ f3TimeClockClockClass Unsigned32,
+ f3TimeClockSelectionMode SyncSelectionMode,
+ f3TimeClockWaitToRestoreTime Integer32,
+ f3TimeClockOperationTimeClockRef VariablePointer,
+ f3TimeClockOperationType SyncOperationType,
+ f3TimeClockLeap59 TruthValue,
+ f3TimeClockLeap61 TruthValue,
+ f3TimeClockTimeTraceAbilityStatus TimeTraceAbilityStatus,
+ f3TimeClockExpectedQL SSMQualityLevel,
+ f3TimeClockCurrentQL SSMQualityLevel,
+ f3TimeClockSyncRefCandidate TruthValue,
+ f3TimeClockTimeHoldoverPerformance TimeHoldoverPerformance,
+ f3TimeClockUtcOffset Unsigned32,
+ f3TimeClockCurrentTimeOfDay DateAndTime,
+ f3TimeClockFrequencyReference VariablePointer,
+ f3TimeClockFrequencyClockMode ClockMode,
+ f3TimeClockTimeScale TimeScale,
+ f3TimeClockTODSource TODSource,
+ f3TimeClockEPRTCModeEnabled TruthValue,
+ f3TimeClockTimeHoldoverTimeout Integer32,
+ f3TimeClockTimeInHoldover Integer32,
+ f3TimeClockAtoiCurrentOffset Integer32,
+ f3TimeClockAtoiJumpSeconds Integer32,
+ f3TimeClockAtoiTimeOfNextJump Counter64,
+ f3TimeClockAtoiDisplayName DisplayString,
+ f3TimeClockPhaseAdjust Integer32
+ }
+
+f3TimeClockIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Unique index value associated with the Time Clock Entity."
+ ::= { f3TimeClockEntry 1 }
+
+f3TimeClockAlias OBJECT-TYPE
+ SYNTAX F3DisplayString (SIZE(0..256))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows SNMP management entities to provide an
+ alias to the Time Clock entity."
+ ::= { f3TimeClockEntry 2 }
+
+f3TimeClockAdminState OBJECT-TYPE
+ SYNTAX AdminState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object represents the Administrative State of the Time Clock
+ Entity."
+ ::= { f3TimeClockEntry 3 }
+
+f3TimeClockOperationalState OBJECT-TYPE
+ SYNTAX OperationalState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object represents the Operational State of the Time Clock
+ Entity."
+ ::= { f3TimeClockEntry 4 }
+
+f3TimeClockSecondaryState OBJECT-TYPE
+ SYNTAX SecondaryState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object represents the Secondary State of the Time Clock
+ Entity."
+ ::= { f3TimeClockEntry 5 }
+
+f3TimeClockSelectedReference OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the source of the currently selected
+ Time Clock reference. This would be the OID of the actual entity (GPS port, PPS port etc.).
+ An OID value of {0 0} represents internal clock."
+ ::= { f3TimeClockEntry 6 }
+
+f3TimeClockClockMode OBJECT-TYPE
+ SYNTAX TimeClockMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the Time Clock mode."
+ ::= { f3TimeClockEntry 7 }
+
+f3TimeClockClockClass OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION "This object provides the Time Clock Clock Class"
+ ::= { f3TimeClockEntry 8 }
+
+f3TimeClockSelectionMode OBJECT-TYPE
+ SYNTAX SyncSelectionMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "!! Currently Only Priority Mode is supported !!
+ This object represents the Time Clock entity's selection mode.
+ If this mode is configured as ql-mode, the selection of
+ which reference should be used shall be based upon the
+ reference's Quality Level. The highest received
+ Quality Level shall be the selected reference. The priority
+ shall only be used to distinguish between references with the
+ same received QL. When multiple references have the same QL
+ and same priority, the behavior of selection process within
+ the group is non-revertive.
+ If this mode is configued as priority-mode, the selection
+ of which reference should be used shall be based upon
+ the reference's priority (i.e. QL is disabled). When
+ multiple references have the same priority, the behavior of
+ selection process within the group is non-revertive."
+ ::= { f3TimeClockEntry 9 }
+
+f3TimeClockWaitToRestoreTime OBJECT-TYPE
+ SYNTAX Integer32 (0..12)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows configuration of the Time Clock entity's wait-to-restore
+ time (in minutes). A value of 0 disables WTR timers for all references."
+ ::= { f3TimeClockEntry 10 }
+
+f3TimeClockOperationTimeClockRef OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows configuration of the Object Identifier of the
+ TimeClock Reference Entity on which the f3TimeClockOperationType is performed.
+ A value of 0.0 denotes no Time Clock reference is chosen for operation."
+ ::= { f3TimeClockEntry 11 }
+
+f3TimeClockOperationType OBJECT-TYPE
+ SYNTAX SyncOperationType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows to perform the specified operation on the Time Clock Reference
+ specified by f3TimeClockOperationTimeClockRef."
+ ::= { f3TimeClockEntry 12 }
+
+f3TimeClockLeap59 OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "True if last minute of current UTC day contains 59 seconds, else false"
+ ::= { f3TimeClockEntry 13 }
+
+f3TimeClockLeap61 OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "True if last minute of current UTC day contains 61 seconds, else false"
+ ::= { f3TimeClockEntry 14 }
+
+f3TimeClockTimeTraceAbilityStatus OBJECT-TYPE
+ SYNTAX TimeTraceAbilityStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object describe the trace ability status."
+ ::= { f3TimeClockEntry 15 }
+
+f3TimeClockExpectedQL OBJECT-TYPE
+ SYNTAX SSMQualityLevel
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object describe the expected quality level."
+ ::= { f3TimeClockEntry 16 }
+
+f3TimeClockCurrentQL OBJECT-TYPE
+ SYNTAX SSMQualityLevel
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object describe the current quality level."
+ ::= { f3TimeClockEntry 17 }
+
+f3TimeClockSyncRefCandidate OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object describe whether it is sync reference candiddate."
+ ::= { f3TimeClockEntry 18 }
+
+f3TimeClockTimeHoldoverPerformance OBJECT-TYPE
+ SYNTAX TimeHoldoverPerformance
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object describe the Holdover performance."
+ ::= { f3TimeClockEntry 19 }
+
+f3TimeClockUtcOffset OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object describe the UTC offset."
+ ::= { f3TimeClockEntry 20 }
+
+f3TimeClockCurrentTimeOfDay OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object allows specification of the Time Clock Current
+ Time of Day."
+ ::= { f3TimeClockEntry 21 }
+
+f3TimeClockFrequencyReference OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object provides the source of the currently selected frequency source for the Time Clock.
+ This would be the OID of the actual entity (GNSS Receiver port, Input Frquency Port, Sync object).
+ An OID value of {0.0} represents a state where the Time Clock does not use a dedicated frequency input."
+ ::= { f3TimeClockEntry 22 }
+
+f3TimeClockFrequencyClockMode OBJECT-TYPE
+ SYNTAX ClockMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the Frequency Clock mode determined according to the used f3TimeClockFrequencyReference.
+ In Case the f3TimeClockFrequencyReference is not selected (0.0), a 'notAvailable' value shall be used here"
+ ::= { f3TimeClockEntry 23 }
+
+f3TimeClockTimeScale OBJECT-TYPE
+ SYNTAX TimeScale
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows configuration of the Sync entity's Time Scale. Only PTP or ARB values are allowed.
+ In PTP mode, phase is recovered from time reference source. In ARB mode phase is taken from Linux time and locked on chosen reference."
+ ::= { f3TimeClockEntry 24 }
+
+f3TimeClockTODSource OBJECT-TYPE
+ SYNTAX TODSource
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the ARB TOD Source. The value decided according to the Time Scale parameter.
+ Can be NA or System TOD."
+ ::= { f3TimeClockEntry 25 }
+f3TimeClockEPRTCModeEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object describe whether it is EPRTC Mode Enabled.
+ When enabled, the time clock combines the stable frequency input, such as a Cesium Clock, to extend the holdover capability to meet the e-PRTC holdover standards.
+ Before configuring this setting, ensure that you activate the e-PRTC license.
+ Note: This setting is applicable for Rb/HQ++ oscillators only."
+ ::= { f3TimeClockEntry 26 }
+
+f3TimeClockTimeHoldoverTimeout OBJECT-TYPE
+ SYNTAX Integer32 (0..3000000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Configurable Holdover time
+ The time (0..3000000 seconds) that the OCXO is expected to maintain the
+ required accuracy and maintain Holdover-within-limits. Default is 0."
+ ::= { f3TimeClockEntry 27 }
+
+f3TimeClockTimeInHoldover OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "Time (seconds) in Holdover."
+ ::= { f3TimeClockEntry 28 }
+
+f3TimeClockAtoiCurrentOffset OBJECT-TYPE
+ SYNTAX Integer32 (-32768..32767)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of currentOffset (offset of the alternate time, in seconds, from
+ the time of this node). The alternate time is the sum of this value and the time of
+ the node, which is TAI if the PTP time scale is used."
+ REFERENCE "IEC61588 16.3.3.4"
+ ::= { f3TimeClockEntry 29 }
+
+f3TimeClockAtoiJumpSeconds OBJECT-TYPE
+ SYNTAX Integer32 (-32768..32767)
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of jumpSeconds (size of the next discontinuity, in seconds, of the
+ alternate time). A value of zero indicates that no discontinuity is expected. A
+ positive value indicates that the discontinuity
+ will cause the currentOffset of the alternate time to increase."
+ REFERENCE "IEC61588 16.3.3.5"
+ ::= { f3TimeClockEntry 30 }
+
+f3TimeClockAtoiTimeOfNextJump OBJECT-TYPE
+ SYNTAX Counter64
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of timeOfNextJump (value of the seconds portion of the time of the
+ transmitting node at the time that the next discontinuity will occur). The
+ discontinuity occurs at the start of the second indicated
+ by the value of timeOfNextJump."
+ REFERENCE "IEC61588 16.3.3.6"
+ ::= { f3TimeClockEntry 31 }
+
+f3TimeClockAtoiDisplayName OBJECT-TYPE
+ SYNTAX DisplayString (SIZE(0..10))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of displayName (text name of the alternate timescale in ASCII-8).
+ It represent the time zone, e.g. CET;
+ a leading character of * indicates that daylight saving time is in effect."
+ REFERENCE "IEC61588 16.3.3.6"
+ ::= { f3TimeClockEntry 32 }
+
+f3TimeClockPhaseAdjust OBJECT-TYPE
+ SYNTAX Integer32 (0..250000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Configurable Phase Adjust (0..250000 nSec) ."
+ ::= { f3TimeClockEntry 33 }
+
+--
+-- Time Clock Reference Table
+--
+f3TimeClockRefTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3TimeClockRefEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A list of entries corresponding to the Time Clock Reference entities."
+ ::= { f3SyncObjects 4 }
+
+f3TimeClockRefEntry OBJECT-TYPE
+ SYNTAX F3TimeClockRefEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry containing information applicable to a particular
+ Time Clock Reference Entity."
+ INDEX { neIndex, shelfIndex, slotIndex, f3TimeClockIndex, f3TimeClockRefIndex }
+ ::= { f3TimeClockRefTable 1 }
+
+F3TimeClockRefEntry ::= SEQUENCE {
+ f3TimeClockRefIndex Integer32,
+ f3TimeClockRefAlias F3DisplayString,
+ f3TimeClockRefReference VariablePointer,
+ f3TimeClockRefPriority Integer32,
+ f3TimeClockRefStatus SyncRefStatus,
+ f3TimeClockRefState SyncRefState,
+ f3TimeClockRefOperationType SyncOperationType,
+ f3TimeClockRefStorageType StorageType,
+ f3TimeClockRefRowStatus RowStatus
+ }
+
+f3TimeClockRefIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Unique index value associated with the Time Clock Reference Entity."
+ ::= { f3TimeClockRefEntry 1 }
+
+f3TimeClockRefAlias OBJECT-TYPE
+ SYNTAX F3DisplayString (SIZE(0..256))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "This object allows SNMP management entities to provide an
+ alias to the Time Clock Reference entity."
+ ::= { f3TimeClockRefEntry 2 }
+
+f3TimeClockRefReference OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "This object represents the external reference to be
+ used as system clock reference source."
+ ::= { f3TimeClockRefEntry 3 }
+
+f3TimeClockRefPriority OBJECT-TYPE
+ SYNTAX Integer32 (1..10)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "This object represents the priority of the external reference
+ to be used as Time clock reference source. This value is
+ not mandatory when a single clock reference source is supported.
+ Lower priority value indicates higher priority."
+ ::= { f3TimeClockRefEntry 4 }
+
+f3TimeClockRefStatus OBJECT-TYPE
+ SYNTAX SyncRefStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the Time Clock reference status."
+ ::= { f3TimeClockRefEntry 5 }
+
+f3TimeClockRefState OBJECT-TYPE
+ SYNTAX SyncRefState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the Time Clock reference state."
+ ::= { f3TimeClockRefEntry 6 }
+
+f3TimeClockRefOperationType OBJECT-TYPE
+ SYNTAX SyncOperationType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides information on the current/active operation
+ on this Time Clock reference."
+ ::= { f3TimeClockRefEntry 7 }
+
+f3TimeClockRefStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "The type of storage configured for this entry."
+ ::= { f3TimeClockRefEntry 8 }
+
+f3TimeClockRefRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION "The status of this row. An entry MUST NOT exist in the
+ active state unless all objects in the entry have an
+ appropriate value, as described
+ in the description clause for each writable object.
+
+ The values of f3TimeClockRefRowStatus supported are
+ createAndGo(4) and destroy(6). All mandatory attributes
+ must be specified in a single SNMP SET request with
+ f3TimeClockRefRowStatus value as createAndGo(4).
+ Upon successful row creation, this object has a
+ value of active(1).
+
+ The f3TimeClockRefRowStatus object may be modified if
+ the associated instance of this object is equal to active(1)."
+ ::= { f3TimeClockRefEntry 9 }
+
+--
+-- PRC Table
+--
+f3PrcTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3PrcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "A list of entries corresponding to the Primary Reference Clock (PRC) entities."
+ ::= { f3SyncObjects 5 }
+
+f3PrcEntry OBJECT-TYPE
+ SYNTAX F3PrcEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "An entry containing information applicable to a particular
+ Primary Reference Clock Entity."
+ INDEX { neIndex, shelfIndex, slotIndex, f3PrcIndex }
+ ::= { f3PrcTable 1 }
+
+F3PrcEntry ::= SEQUENCE {
+ f3PrcIndex Integer32,
+ f3PrcAlias F3DisplayString,
+ f3PrcAdminState AdminState,
+ f3PrcOperationalState OperationalState,
+ f3PrcSecondaryState SecondaryState,
+ f3PrcSsmMode SsmMode,
+ f3PrcClockMode TimeClockMode,
+ f3PrcAccuracyAdjustement Integer32,
+ f3PrcCurrentQL SSMQualityLevel,
+ f3PrcAcknowledgeAction AcknowledgeType,
+ f3PrcRestartAction RestartType
+ }
+
+f3PrcIndex OBJECT-TYPE
+ SYNTAX Integer32(-2147483648..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "Unique index value associated with the Primary Reference Clock Entity."
+ ::= { f3PrcEntry 1 }
+
+f3PrcAlias OBJECT-TYPE
+ SYNTAX F3DisplayString (SIZE(0..256))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows SNMP management entities to provide an
+ alias to the Primary Reference Clock entity."
+ ::= { f3PrcEntry 2 }
+
+f3PrcAdminState OBJECT-TYPE
+ SYNTAX AdminState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object represents the Administrative State of the Primary Reference Clock
+ Entity."
+ ::= { f3PrcEntry 3 }
+
+f3PrcOperationalState OBJECT-TYPE
+ SYNTAX OperationalState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object represents the Operational State of the Primary Reference Clock
+ Entity."
+ ::= { f3PrcEntry 4 }
+
+f3PrcSecondaryState OBJECT-TYPE
+ SYNTAX SecondaryState
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object represents the Secondary State of the Primary Reference Clock
+ Entity."
+ ::= { f3PrcEntry 5 }
+
+f3PrcSsmMode OBJECT-TYPE
+ SYNTAX SsmMode
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object provides the PRC SSM mode. It determines whether or not the SSM
+ is given to the BITS-OUT Ports."
+ ::= { f3PrcEntry 6 }
+
+f3PrcClockMode OBJECT-TYPE
+ SYNTAX TimeClockMode
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object provides the PRC Clock Mode."
+ ::= { f3PrcEntry 7 }
+
+f3PrcAccuracyAdjustement OBJECT-TYPE
+ SYNTAX Integer32 (-1000000..1000000)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "This object allows to adjust an internal frequency to optimize
+ the PRC accuracy. This is typically done only once after the Prc has been
+ tested. The value is a relative frequency with unit value of 10e-15."
+ ::= { f3PrcEntry 8 }
+
+f3PrcCurrentQL OBJECT-TYPE
+ SYNTAX SSMQualityLevel
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION "This object describe the current quality level."
+ ::= { f3PrcEntry 9 }
+
+f3PrcAcknowledgeAction OBJECT-TYPE
+ SYNTAX AcknowledgeType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Allows to acknowledge the alarm that raises when
+ f3AccuracyAdjustement value is changed."
+ ::= { f3PrcEntry 10 }
+
+f3PrcRestartAction OBJECT-TYPE
+ SYNTAX RestartType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "Allows to perform specified warm restart action on the PRC Clock.
+ Cold restart is refused by the equipment"
+ ::= { f3PrcEntry 11 }
+
+
+--
+-- Sync Protection Group Table
+--
+f3SyncProtGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3SyncProtGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of entries corresponding to the Sync Protection Groups.
+ "
+ ::= { f3SyncObjects 6 }
+
+f3SyncProtGroupEntry OBJECT-TYPE
+ SYNTAX F3SyncProtGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing information applicable to a Sync
+ Protection Group."
+ INDEX { neIndex, f3SyncProtGroupIndex }
+ ::= { f3SyncProtGroupTable 1 }
+
+F3SyncProtGroupEntry ::= SEQUENCE {
+ f3SyncProtGroupIndex Integer32,
+ f3SyncProtGroupAdminState AdminState,
+ f3SyncProtGroupActiveMember VariablePointer,
+ f3SyncProtGroupLastSwitchOverTime TimeTicks,
+ f3SyncProtGroupLastSwitchOverReason CmGenPgSwitchoverReason,
+ f3SyncProtGroupStorageType StorageType,
+ f3SyncProtGroupRowStatus RowStatus
+}
+
+f3SyncProtGroupIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Unique index value associated with the Sync Protection Group
+ entity."
+ ::= { f3SyncProtGroupEntry 1 }
+
+f3SyncProtGroupAdminState OBJECT-TYPE
+ SYNTAX AdminState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object represents the Administrative State of the Sync
+ Protection Group."
+ ::= { f3SyncProtGroupEntry 2 }
+
+f3SyncProtGroupActiveMember OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The corresponding OID of the Active Member in the Sync Protection Group."
+ ::= { f3SyncProtGroupEntry 3 }
+
+f3SyncProtGroupLastSwitchOverTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when last switch over occurred."
+ ::= { f3SyncProtGroupEntry 4 }
+
+f3SyncProtGroupLastSwitchOverReason OBJECT-TYPE
+ SYNTAX CmGenPgSwitchoverReason
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The reason for last switch over in the Sync Protection Group."
+ ::= { f3SyncProtGroupEntry 5 }
+
+f3SyncProtGroupStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of storage configured for this entry."
+ ::= { f3SyncProtGroupEntry 6 }
+
+f3SyncProtGroupRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this row. An entry MUST NOT exist in the
+ active state unless all objects in the entry have an
+ appropriate value, as described
+ in the description clause for each writable object.
+
+ The values of f3SyncProtGroupRowStatus supported are
+ createAndGo(4) and destroy(6). All mandatory attributes
+ must be specified in a single SNMP SET request with
+ f3SyncProtGroupRowStatus value as createAndGo(4).
+ Upon successful row creation, this object has a
+ value of active(1).
+
+ The f3SyncProtGroupRowStatus object may be modified if
+ the associated instance of this object is equal to active(1)."
+ ::= { f3SyncProtGroupEntry 7 }
+
+
+---
+--- Sync Protection Member Table
+---
+f3SyncProtMemberTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3SyncProtMemberEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of entries for the Sync Protection Group Members."
+ ::= { f3SyncObjects 7 }
+
+f3SyncProtMemberEntry OBJECT-TYPE
+ SYNTAX F3SyncProtMemberEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the f3SyncProtMemberTable."
+ INDEX { neIndex, f3SyncProtGroupIndex, f3SyncProtMemberObject }
+ ::= { f3SyncProtMemberTable 1 }
+
+F3SyncProtMemberEntry ::= SEQUENCE {
+ f3SyncProtMemberObject VariablePointer,
+ f3SyncProtMemberStorageType StorageType,
+ f3SyncProtMemberRowStatus RowStatus
+}
+
+f3SyncProtMemberObject OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object points to the Protection Group Member."
+ ::= { f3SyncProtMemberEntry 1 }
+
+f3SyncProtMemberStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of storage configured for this entry."
+ ::= { f3SyncProtMemberEntry 2 }
+
+f3SyncProtMemberRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this row.
+ An entry MUST NOT exist in the active state unless all
+ objects in the entry have an appropriate value, as described
+ in the description clause for each writable object.
+
+ The values of f3SyncProtMemberRowStatus supported are
+ createAndGo(4) and destroy(6). All mandatory attributes
+ must be specified in a single SNMP SET request with
+ f3SyncProtMemberRowStatus value as createAndGo(4).
+ Upon successful row creation, this object has a
+ value of active(1).
+
+ The f3SyncProtMemberRowStatus object may be modified if
+ the associated instance of this object is equal to active(1)."
+ ::= { f3SyncProtMemberEntry 3 }
+
+
+--
+-- Time Clock Protection Group Table
+--
+f3TimeClockProtGroupTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3TimeClockProtGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of entries corresponding to the Time Clock Protection Groups.
+ "
+ ::= { f3SyncObjects 8 }
+
+f3TimeClockProtGroupEntry OBJECT-TYPE
+ SYNTAX F3TimeClockProtGroupEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry containing information applicable to a Time Clock
+ Protection Group."
+ INDEX { neIndex, f3TimeClockProtGroupIndex }
+ ::= { f3TimeClockProtGroupTable 1 }
+
+F3TimeClockProtGroupEntry ::= SEQUENCE {
+ f3TimeClockProtGroupIndex Integer32,
+ f3TimeClockProtGroupAdminState AdminState,
+ f3TimeClockProtGroupActiveMember VariablePointer,
+ f3TimeClockProtGroupLastSwitchOverTime TimeTicks,
+ f3TimeClockProtGroupLastSwitchOverReason CmGenPgSwitchoverReason,
+ f3TimeClockProtGroupStorageType StorageType,
+ f3TimeClockProtGroupRowStatus RowStatus
+}
+
+f3TimeClockProtGroupIndex OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Unique index value associated with the Time Clock Protection Group
+ entity."
+ ::= { f3TimeClockProtGroupEntry 1 }
+
+f3TimeClockProtGroupAdminState OBJECT-TYPE
+ SYNTAX AdminState
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object represents the Administrative State of the
+ Time Clock Protection Group."
+ ::= { f3TimeClockProtGroupEntry 2 }
+
+f3TimeClockProtGroupActiveMember OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The corresponding OID of the Active Member in the Time Clock Protection Group."
+ ::= { f3TimeClockProtGroupEntry 3 }
+
+f3TimeClockProtGroupLastSwitchOverTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when last switch over occurred."
+ ::= { f3TimeClockProtGroupEntry 4 }
+
+f3TimeClockProtGroupLastSwitchOverReason OBJECT-TYPE
+ SYNTAX CmGenPgSwitchoverReason
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The reason for last switch over in the Time Clock Redundancy Group."
+ ::= { f3TimeClockProtGroupEntry 5 }
+
+f3TimeClockProtGroupStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of storage configured for this entry."
+ ::= { f3TimeClockProtGroupEntry 6 }
+
+f3TimeClockProtGroupRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this row. An entry MUST NOT exist in the
+ active state unless all objects in the entry have an
+ appropriate value, as described
+ in the description clause for each writable object.
+
+ The values of f3TimeClockProtGroupRowStatus supported are
+ createAndGo(4) and destroy(6). All mandatory attributes
+ must be specified in a single SNMP SET request with
+ f3TimeClockProtGroupRowStatus value as createAndGo(4).
+ Upon successful row creation, this object has a
+ value of active(1).
+
+ The f3TimeClockProtGroupRowStatus object may be modified if
+ the associated instance of this object is equal to active(1)."
+ ::= { f3TimeClockProtGroupEntry 7 }
+
+
+---
+--- Time Clock Protection Member Table
+---
+f3TimeClockProtMemberTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF F3TimeClockProtMemberEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of entries for the Time Clock Protection Group Members."
+ ::= { f3SyncObjects 9 }
+
+f3TimeClockProtMemberEntry OBJECT-TYPE
+ SYNTAX F3TimeClockProtMemberEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A conceptual row in the f3TimeClockProtMemberTable."
+ INDEX { neIndex, f3TimeClockProtGroupIndex, f3TimeClockProtMemberObject }
+ ::= { f3TimeClockProtMemberTable 1 }
+
+F3TimeClockProtMemberEntry ::= SEQUENCE {
+ f3TimeClockProtMemberObject VariablePointer,
+ f3TimeClockProtMemberStorageType StorageType,
+ f3TimeClockProtMemberRowStatus RowStatus
+}
+
+f3TimeClockProtMemberObject OBJECT-TYPE
+ SYNTAX VariablePointer
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This object points to the Protection Group Member."
+ ::= { f3TimeClockProtMemberEntry 1 }
+
+f3TimeClockProtMemberStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of storage configured for this entry."
+ ::= { f3TimeClockProtMemberEntry 2 }
+
+f3TimeClockProtMemberRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this row.
+ An entry MUST NOT exist in the active state unless all
+ objects in the entry have an appropriate value, as described
+ in the description clause for each writable object.
+
+ The values of f3TimeClockProtMemberRowStatus supported are
+ createAndGo(4) and destroy(6). All mandatory attributes
+ must be specified in a single SNMP SET request with
+ f3TimeClockProtMemberRowStatus value as createAndGo(4).
+ Upon successful row creation, this object has a
+ value of active(1).
+
+ The f3TimeClockProtMemberRowStatus object may be modified if
+ the associated instance of this object is equal to active(1)."
+ ::= { f3TimeClockProtMemberEntry 3 }
+
+
+--
+-- Conformance
+--
+f3SyncCompliances OBJECT IDENTIFIER ::= {f3SyncConformance 1}
+f3SyncGroups OBJECT IDENTIFIER ::= {f3SyncConformance 2}
+
+f3SyncCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION "Describes the requirements for conformance to the F3 Sync
+ group."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ f3SyncObjectGroup
+ }
+
+ ::= { f3SyncCompliances 1 }
+
+f3SyncObjectGroup OBJECT-GROUP
+ OBJECTS {
+ f3SyncIndex, f3SyncAdminState, f3SyncOperationalState,
+ f3SyncSecondaryState,
+ f3SyncNetworkClockType, f3SyncSelectedReference,
+ f3SyncClockMode, f3SyncQL,
+ f3SyncAlias, f3SyncDomain, f3SyncSelectionMode,
+ f3SyncWaitToRestoreTime, f3SyncOperationSyncRef,
+ f3SyncOperationType, f3SyncPLLBw,
+
+ f3SyncRefIndex, f3SyncRefReference, f3SyncRefPriority,
+ f3SyncRefStatus, f3SyncRefState, f3SyncRefReceivedQL,
+ f3SyncRefStorageType, f3SyncRefRowStatus, f3SyncRefAlias,
+ f3SyncRefEffectiveQL, f3SyncRefOperationType
+ }
+ STATUS current
+ DESCRIPTION "A collection of objects used to manage the F3 Sync Object group."
+ ::= { f3SyncGroups 1 }
+
+f3TimeClockObjectGroup OBJECT-GROUP
+ OBJECTS {
+ f3TimeClockIndex, f3TimeClockAlias,
+ f3TimeClockAdminState, f3TimeClockOperationalState, f3TimeClockSecondaryState,
+ f3TimeClockSelectedReference, f3TimeClockClockMode, f3TimeClockClockClass,
+ f3TimeClockSelectionMode, f3TimeClockWaitToRestoreTime, f3TimeClockOperationTimeClockRef,
+ f3TimeClockOperationType, f3TimeClockLeap59, f3TimeClockLeap61,
+ f3TimeClockTimeTraceAbilityStatus,
+ f3TimeClockExpectedQL, f3TimeClockCurrentQL,
+ f3TimeClockSyncRefCandidate, f3TimeClockTimeHoldoverPerformance, f3TimeClockUtcOffset,f3TimeClockCurrentTimeOfDay,
+ f3TimeClockFrequencyReference, f3TimeClockFrequencyClockMode, f3TimeClockTimeScale, f3TimeClockTODSource,f3TimeClockEPRTCModeEnabled,
+ f3TimeClockTimeHoldoverTimeout, f3TimeClockTimeInHoldover,
+ f3TimeClockAtoiCurrentOffset, f3TimeClockAtoiJumpSeconds, f3TimeClockAtoiTimeOfNextJump, f3TimeClockAtoiDisplayName,
+ f3TimeClockPhaseAdjust,
+ f3TimeClockRefIndex, f3TimeClockRefAlias, f3TimeClockRefReference, f3TimeClockRefPriority,
+ f3TimeClockRefStatus, f3TimeClockRefState, f3TimeClockRefOperationType,
+ f3TimeClockRefStorageType, f3TimeClockRefRowStatus
+ }
+ STATUS current
+ DESCRIPTION "A collection of objects used to manage the F3 TimeClock Object group."
+ ::= { f3SyncGroups 2 }
+
+f3PrcObjectGroup OBJECT-GROUP
+ OBJECTS {
+ f3PrcIndex, f3PrcAlias,
+ f3PrcAdminState, f3PrcOperationalState, f3PrcSecondaryState,
+ f3PrcClockMode, f3PrcSsmMode, f3PrcAccuracyAdjustement,
+ f3PrcCurrentQL, f3PrcAcknowledgeAction, f3PrcRestartAction
+ }
+ STATUS current
+ DESCRIPTION "A collection of objects used to manage the F3 Primary Reference Clock Object group."
+ ::= { f3SyncGroups 3 }
+
+f3ProtObjectGroup OBJECT-GROUP
+ OBJECTS {
+ f3SyncProtGroupIndex, f3SyncProtGroupAdminState,
+ f3SyncProtGroupActiveMember,
+ f3SyncProtGroupLastSwitchOverTime, f3SyncProtGroupLastSwitchOverReason,
+ f3SyncProtGroupStorageType, f3SyncProtGroupRowStatus,
+
+ f3SyncProtMemberObject, f3SyncProtMemberStorageType, f3SyncProtMemberRowStatus,
+
+ f3TimeClockProtGroupIndex, f3TimeClockProtGroupAdminState,
+ f3TimeClockProtGroupActiveMember,
+ f3TimeClockProtGroupLastSwitchOverTime, f3TimeClockProtGroupLastSwitchOverReason,
+ f3TimeClockProtGroupStorageType, f3TimeClockProtGroupRowStatus,
+
+ f3TimeClockProtMemberObject, f3TimeClockProtMemberStorageType, f3TimeClockProtMemberRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects used to manage the Protection Object group."
+ ::= { f3SyncGroups 4 }
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 15:00:35 +0000