diff options
Diffstat (limited to 'MIBS/allied/AT-PRI-MIB')
| -rw-r--r-- | MIBS/allied/AT-PRI-MIB | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/MIBS/allied/AT-PRI-MIB b/MIBS/allied/AT-PRI-MIB new file mode 100644 index 0000000..ec8164e --- /dev/null +++ b/MIBS/allied/AT-PRI-MIB @@ -0,0 +1,251 @@ +-- ============================================================================ +-- AT-ETH.MIB, Allied Telesis enterprise MIB: PRI module +-- +-- Extracted from ATROUTER.MIB of pre 2.9.1 release +-- +-- June 2006, Stan Xiang +-- +-- Copyright (c) 2006 by Allied Telesis, Inc. +-- All rights reserved. +-- +-- ============================================================================ + +AT-PRI-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + + DisplayString, + TruthValue + FROM SNMPv2-TC + + ifIndex + FROM IF-MIB + + modules, + DisplayStringUnsized + FROM AT-SMI-MIB +; + +pri MODULE-IDENTITY + LAST-UPDATED "200606281222Z" + ORGANIZATION "Allied Telesis, Inc" + CONTACT-INFO + "http://www.alliedtelesis.com" + DESCRIPTION + "This MIB file contains definitions of managed objects for the + PRI module. " + + REVISION "200606281222Z" +DESCRIPTION + "Initial Revision" + +::= { modules 42 } + +-- The PRI module. This group consists of a table of PRI interfaces indexed +-- by ifIndex which provide MIB objects not given in a convenient form by +-- other standard MIBs. There is also a PRI channel MIB indexed by ifIndex +-- and channel index which gives information about the channels on the +-- interface. + +-- The PRI interface table. Each entry is a PRI interface on the router. + +priIntTable OBJECT-TYPE + SYNTAX SEQUENCE OF PriIntEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of PRI interfaces." + ::= { pri 1 } + +priIntEntry OBJECT-TYPE + SYNTAX PriIntEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A single entry in the PRI interfaces table." + INDEX { priIntIndex } + ::= { priIntTable 1 } + +PriIntEntry ::= + SEQUENCE { + priIntIndex + INTEGER, + priIntBoardIndex + INTEGER, + priIntBoardPosition + INTEGER, + priIntMode + INTEGER, + priIntTdmChannelMap + INTEGER, + priIntIsdnChannelMap + INTEGER, + priIntType + INTEGER + } + +priIntIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the PRI interface." + ::= { priIntEntry 1 } + +priIntBoardIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index in the arBoardTable of the board on which this PRI + interface resides." + ::= { priIntEntry 2 } + +priIntBoardPosition OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The position on this PRI interface's board of this PRI + interface." + ::= { priIntEntry 3 } + +priIntMode OBJECT-TYPE + SYNTAX INTEGER { + isdn (1), + tdm (2), + mixed (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The mode of operation of this PRI interface. The value isdn + means that the entire interface is operating as an ISDN + interface, the value tdm means that the entire interface is + operating as TDM groups and the value mixed means that some + channels in the interface are dedicated to ISDN and some to TDM + groups." + ::= { priIntEntry 4 } + +priIntTdmChannelMap OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit map of the channels in the PRI interface which are + dedicated to TDM. PRI channels are numbered from 0 to 31, 0 is + unused, 16 (E1) or 24 (T1) is the D channel. The map values are + 2 to the power of the channel number." + ::= { priIntEntry 5 } + +priIntIsdnChannelMap OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit map of the channels in the PRI interface which are + dedicated to ISDN. PRI channels are numbered from 0 to 31, 0 is + unused, 16 (E1) or 24 (T1) is the D channel. The map values are + 2 to the power of the channel number." + ::= { priIntEntry 6 } + +priIntType OBJECT-TYPE + SYNTAX INTEGER { + e1 (1), + t1 (2), + unknown (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of primary rate interface. E1 has 30 B + D channel, + T1 has 23 B + D channel. If the value unknown is returned for + this object, the exact PRI type has not yet been determined." + ::= { priIntEntry 7 } + +-- The PRI channel table. Each entry is a channel on a PRI interface. + +priChanTable OBJECT-TYPE + SYNTAX SEQUENCE OF PriChanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of channels on PRI interfaces." + ::= { pri 2 } + +priChanEntry OBJECT-TYPE + SYNTAX PriChanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A single entry in the PRI channels table." + INDEX { priChanIntIndex, priChanChannelIndex } + ::= { priChanTable 1 } + +PriChanEntry ::= + SEQUENCE { + priChanIntIndex + INTEGER, + priChanChannelIndex + INTEGER, + priChanMode + INTEGER, + priChanState + INTEGER + } + +priChanIntIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the PRI interface." + ::= { priChanEntry 1 } + +priChanChannelIndex OBJECT-TYPE + SYNTAX INTEGER (1..31) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The channel index of the PRI channel. Valid channels have + indices from 1 to 31. The D channel on an E1 interface has + index 16, the D channel on a T1 interface has index 24." + ::= { priChanEntry 2 } + +priChanMode OBJECT-TYPE + SYNTAX INTEGER { + isdn (1), + tdm (2), + neither (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The mode of this PRI channel. The value isdn means that the + channel is reserved for use in ISDN calls. The value tdm + means that the channel is reserved for use by TDM. For the D + channel, this object will usually have the value isdn. An + exception is if the interface is running common D channel mode + and the D channel is reserved for TDM." + ::= { priChanEntry 3 } + +priChanState OBJECT-TYPE + SYNTAX INTEGER { + inactive (1), + active (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of this PRI channel. The value inactive means that + the channel does not currently have an active user, either an + ISDN call or an active TDM group. The value active means that + the channel is in use, either by an ISDN call or an active TDM + group." + ::= { priChanEntry 4 } + +END |