diff options
Diffstat (limited to 'MIBS/allied/AtiL2-MIB')
| -rw-r--r-- | MIBS/allied/AtiL2-MIB | 3395 |
1 files changed, 3395 insertions, 0 deletions
diff --git a/MIBS/allied/AtiL2-MIB b/MIBS/allied/AtiL2-MIB new file mode 100644 index 0000000..b128359 --- /dev/null +++ b/MIBS/allied/AtiL2-MIB @@ -0,0 +1,3395 @@ +-- Copyright 1999-2002 by Allied Telesyn International, Inc. +-- +-- Name : ATIL2.MIB +-- Version : 2.3 +-- Description : Private MIB for ATI Gigabit Uplink and 10/100M Switches. +-- : This MIB will be used in Windows and UNIX Environment. + +-- History : +-- * 04-13-99 - Created. +-- * 04-03-02 (Praveen) - Renamed the MIB from fstswtch-mib to atil2-mib +-- * 04-17-02 (Praveen) - Added atiL2DeviceNumber. Extended atiL2deviceProductType +-- with values for AT-8326GB, AT-9410GB and AT-8350GB +-- * 04-18-02 (Praveen) - Added product OID entry for AT-8316F +-- * 04-26-02 (Praveen) - Changed atiL2DevicePortSpeed from read-write to read-only +-- * 08-23-02 (Praveen) - Added a new product specific group atiL2QOSConfigGroup, +-- applicable only to AT-8326GB, AT-9410GB and AT-8350GB. +-- Changed range of atiL2DevicePortSTPCost from 0..65535 to +-- 1..65535 + + +AtiL2-MIB DEFINITIONS ::= BEGIN + + IMPORTS + enterprises,Counter,IpAddress,TimeTicks + FROM RFC1155-SMI + DisplayString + FROM RFC1213-MIB + TRAP-TYPE + FROM RFC-1215 + OBJECT-TYPE + FROM RFC-1212; + + +-- +-- General Definitions +-- + + MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address + + BridgeId ::= OCTET STRING (SIZE (8)) -- the Bridge + -- Identifier as + -- used in the + -- Spanning Tree + -- Protocol to uniquely identify a bridge. Its first two + -- octets (in network byte order) contain a priority + -- value and its last 6 octets contain the MAC address + -- used to refer to a bridge in a unique fashion + -- (typically, the numerically smallest MAC address + -- of all ports on the bridge). + + -- Several objects in this MIB module represent values of + -- timers used by the Spanning Tree Protocol. In this + -- MIB, these timers have values in units of hundreths of + -- a second (i.e. 1/100 secs). + -- These timers, when stored in a Spanning Tree Protocol's + -- BPDU, are in units of 1/256 seconds. Note, however, + -- that 802.1D-1990 specifies a settable granularity of + -- no more than 1 second for these timers. To avoid + -- ambiguity, a data type is defined here as a textual + -- convention and all representation of these timers + -- in this MIB module are defined using this data type. An + -- algorithm is also defined for converting between the + -- different units, to ensure a timer's value is not + -- distorted by multiple conversions. + -- The data type is: + + Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds + + -- To convert a Timeout value into a value in units of + -- 1/256 seconds, the following algorithm should be used: + -- + -- b = floor( (n * 256) / 100) + -- + -- where: + -- floor = quotient [ignore remainder] + -- n is the value in 1/100 second units + -- b is the value in 1/256 second units + -- + -- To convert the value from 1/256 second units back to + -- 1/100 seconds, the following algorithm should be used: + -- + -- n = ceiling( (b * 100) / 256) + -- + -- where: + -- ceiling = quotient [if remainder is 0], or + -- quotient + 1 [if remainder is non-zero] + -- n is the value in 1/100 second units + -- b is the value in 1/256 second units + -- + -- Note: it is important that the arithmetic operations are + -- done in the order specified (i.e., multiply first, divide + -- second). + + +-- OID tree for Allied Telesyn Products and MIBs + + + alliedTelesyn OBJECT IDENTIFIER ::= { enterprises 207 } + + atiProduct OBJECT IDENTIFIER ::= { alliedTelesyn 1 } + swhub OBJECT IDENTIFIER ::= { atiProduct 4 } + at-8324 OBJECT IDENTIFIER ::= { swhub 37 } + at-8124XL-V2 OBJECT IDENTIFIER ::= { swhub 52 } + at-8326GB OBJECT IDENTIFIER ::= { swhub 72 } + at-9410GB OBJECT IDENTIFIER ::= { swhub 73 } + at-8350GB OBJECT IDENTIFIER ::= { swhub 74 } + at-8316F OBJECT IDENTIFIER ::= { swhub 77 } + + mibObject OBJECT IDENTIFIER ::= { alliedTelesyn 8 } + atiL2Mib OBJECT IDENTIFIER + -- LAST-UPDATED "9903200000Z" + -- ORGANIZATION "Allied Telesyn International." + -- CONTACT-INFO + -- "Allied Telesyn International Customer Service + -- + -- Postal: 960 Stewart Drive,Suite B + -- Sunnyvale, CA 94086 + -- USA + -- + -- Email: support@alliedtelesyn.com + -- + -- DESCRIPTION + -- "Private MIB for ATI Gigabit Uplink and 10/100M + -- Switches" + ::= { mibObject 33} + + +-- Stack Wide Generic Groups + +atiL2GlobalGroup OBJECT IDENTIFIER ::= {atiL2Mib 1 } + +atiL2IpGroup OBJECT IDENTIFIER ::= {atiL2Mib 2} + +atiL2NMGroup OBJECT IDENTIFIER ::= {atiL2Mib 3} + +atiL2DHCPGroup OBJECT IDENTIFIER ::= {atiL2Mib 4} + + + +-- Module Wide Generic Groups + +atiL2DeviceGroup OBJECT IDENTIFIER ::= {atiL2Mib 5} + +atiL2EthernetStatsGroup OBJECT IDENTIFIER ::= {atiL2Mib 6} + + + +-- Port on a Module Groups + +atiL2DevicePortConfigGroup OBJECT IDENTIFIER ::= {atiL2Mib 7} + +atiL2VlanConfigGroup OBJECT IDENTIFIER ::= {atiL2Mib 8} + +atiL2IfExt OBJECT IDENTIFIER ::= { atiL2Mib 9} + +atiL2BridgeMib OBJECT IDENTIFIER ::= { atiL2Mib 10} +atiL2BrBase OBJECT IDENTIFIER ::= { atiL2BridgeMib 1 } +atiL2BrStp OBJECT IDENTIFIER ::= { atiL2BridgeMib 2 } +atiL2BrTp OBJECT IDENTIFIER ::= { atiL2BridgeMib 3 } + +atiL2TrapAttrGroup OBJECT IDENTIFIER ::= { atiL2Mib 11} + + +-- Product specific groups + +-- Applicable only to at-8326GB, at-9410GB and at-8350GB +atiL2QOSConfigGroup OBJECT IDENTIFIER ::= { atiL2Mib 12} + + +-- +-- atiL2GlobalGroup +-- + +atiL2SwProduct OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Identifies the software product the device is + running." + ::= { atiL2GlobalGroup 1 } + + +atiL2SwVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + " Identifies the version number of the present + release." + ::= { atiL2GlobalGroup 2 } + + +atiL2Reset OBJECT-TYPE + SYNTAX INTEGER { + switch-no-reset (1), + switch-reset (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " Object use to reset all the Modules globally." + ::= { atiL2GlobalGroup 3 } + + +atiL2MirroringSourceModule OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " This is the mirror source module number. If the + atiL2EthConfigMirrorState is Enabled then the mirror + source module/port data gets routed to the mirror + destination module/port. Both transmitted and + recieved source activity is mirrored to the destination. + This arrangement is to put an RMON Probe on the + destination port to probe the traffic on the Source port. + This object will return a '0' if the MirrorState is not + enabled." + ::= { atiL2GlobalGroup 4 } + + +atiL2MirroringSourcePort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " This is the Source port number for which there is + another mirror port.If the atiL2EthConfigMirrorState is + Enabled then the mirror portgets routed with all the + packets going in and out of Source port. This + arrangement is to put an RMON Probe on mirrored port to + Probe the traffic on the Source port. One of the port is + dedicated to this so that for any port as source port, + this dedicated port can be a mirrored port. This object + will return a '0' if the MirrorState is not enabled." + ::= { atiL2GlobalGroup 5 } + + +atiL2MirroringDestinationModule OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " This is the mirror destination module number. If the + atiL2EthConfigMirrorState is Enabled then the mirror + source module/port data gets routed to the mirror + destination module/port. Both transmitted and recieved + source activity is mirrored to the destination. This + arrangement is to put an RMON Probe on the destination + port to probe the traffic on the Source port. This + object will return a '0' if the MirrorState is not + enabled." + ::= { atiL2GlobalGroup 6 } + + +atiL2MirroringDestinationPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + " This is the Destination port number for which there is + another mirror port.If the atiL2EthConfigMirrorState is + Enabled then,the mirror portgets routed with all the + packets going in and out of Destination port. This + arrangement is to put an RMON Probe on mirrored port to + Probe the traffic on the Destination port. One of the + port is dedicated to this so that for any port as + destination port, this dedicated port can be a mirrored + port. This object will return a '0' if the MirrorState + is not enabled." + ::= { atiL2GlobalGroup 7 } + +atiL2MirrorState OBJECT-TYPE + SYNTAX INTEGER { + receive-and-transmit(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + " if the state of Mirroring is enabled by selecting one + of the two values , then the Mirroring explained above + works. If disabled, port operation works normally. No + Traffic gets routed from MirroringSourcePort to + Destination Mirrored Port." + ::= { atiL2GlobalGroup 8 } + + +atiL2IGMPState OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This attribute allows an administrative request to + configure IGMP" + ::= { atiL2GlobalGroup 9 } + + +atiL2DeviceNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of devices in the stack." + ::= { atiL2GlobalGroup 10 } + + +-- +-- atiL2IpGroup +-- +-- The Ip Sys group contains IP Address which is current and configured +-- IP address which gets effective when reset. Also, subnet mask and +-- Default Gateway address. + + +atiL2CurrentIpAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + " The Current IP address is the one which is currently + used and is obtained dynamically through one of the + protocols interaction.( DHCP or Bootp.) This address + is NULL if the Address is Statically configured." + ::= { atiL2IpGroup 1 } + + +atiL2ConfiguredIpAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + " The Configured IP address of the device. This is + the address configured through Network or Local Omega. " + ::= { atiL2IpGroup 2 } + + +atiL2ConfiguredSubnetMask OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + " The Configured Subnet Mask of the device." + ::= { atiL2IpGroup 3 } + + +atiL2ConfiguredRouter OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + " The Configured Gateway/Router address of the device" + ::= { atiL2IpGroup 4 } + + +atiL2IPAddressStatus OBJECT-TYPE + SYNTAX INTEGER { + from-dhcp(1), + from-bootp(2), + from-psuedoip(3), + from-Omega(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + " The IP Address can be obtained/configured by any of + the above different ways. This object specifies how + IP address currently on the switch Box, was + configured/obtained." + ::= { atiL2IpGroup 5 } + + +atiL2DNServer OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + " The Configured DNS Server address of the device" + ::= { atiL2IpGroup 6 } + + +atiL2DefaultDomainName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..255)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + " This Object defines the Default Domain where this + switch can be belong to." + ::= { atiL2IpGroup 7 } + + +-- +-- atiL2NMGroup (SNMP NetManagemnt related MIB object) +-- + +atiL2NwMgrTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2NwMgrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of SNMP Trap Manager stations Entries. + The number of entries is given by the + switchNwMgrTotal mib object." + ::= { atiL2NMGroup 1 } + + +atiL2NwMgrEntry OBJECT-TYPE + SYNTAX AtiL2NwMgrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Trap receipt Manager Entry containing ipaddress of + the configured NMS's to which Traps are sent." + INDEX { atiL2NwMgrIndex } + ::= { atiL2NwMgrTable 1 } + + +AtiL2NwMgrEntry ::= + SEQUENCE { + atiL2NwMgrIndex INTEGER, + atiL2NwMgrIpAddr IpAddress + } + + +atiL2NwMgrIndex OBJECT-TYPE + SYNTAX INTEGER (1..4) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Index of the Managers Ip address." + ::= { atiL2NwMgrEntry 1 } + + +atiL2NwMgrIpAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP Address of the NMS host configured." + ::= { atiL2NwMgrEntry 2 } + + +-- +-- atiL2DHCPGroup +-- + +atiL2DHCPSysGroup OBJECT IDENTIFIER ::= {atiL2DHCPGroup 1 } +atiL2DHCPTimerGroup OBJECT IDENTIFIER ::= {atiL2DHCPGroup 2 } + + +--atiL2DHCPCurrentDHCPServerAddress OBJECT-TYPE +-- SYNTAX IpAddress +-- ACCESS read-only +-- STATUS mandatory +-- DESCRIPTION +-- "The IP address of the DHCP server selected by the end of +-- DHCP Protocols 'REQUEST STATE' .DHCP client selects the +-- server from the responses ( one or more ) in the +-- SELECTSTATE and sends out a DHCPREQUEST to confirm the +-- DHCP server selected." +-- ::= {atiL2DHCPSysGroup 1} + + +atiL2DHCPCurrentDHCPClientAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Current IP address of the client. To start with,it might + be null. This is filled by the server when sending a + DHCPOFFER and the client uses the most comfortable offer + from offers sent by different DHCP servers. A DHCPREQUEST + packet is sent with the Client address agreed upon to the + selected server ( Broadcast). Server Acks back this packet + which is where Client/Server moves to the Bound state. Once + reached into Bound state, the client address is made the + official address on the client." + ::= {atiL2DHCPSysGroup 1} + + +atiL2DHCPSubnetMask OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "When the client/server reaches the BOUND state, this is + one of the parameters set by the server." + ::= {atiL2DHCPSysGroup 2} + + +atiL2DHCPCurrentRelayAgentAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address of the DHCP relay Agent on the same subnet. + Normally there will be no DHCP server on each of the + subnet and this Relay Agent will act in sending server + across the subnets. There might not be any relay agent. + This depends on the network Toplogy like where is the + DHCP server and DHCP client." + ::= {atiL2DHCPSysGroup 3} + + +atiL2DHCPNextDHCPServerAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address of the next DHCP server to be used during + bootstrap. This address is sent by the DHCP server in + the messages DHCPOFFER, DHCPACK,DHCPNACK." + ::= {atiL2DHCPSysGroup 4} + + +atiL2DHCPLeaseTimer OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "When the client/server reaches the BOUND state, this is + one of the parameters set by the server. The lease time + period in seconds for the DHCP client for using IP address + on lease from the server. At the end of 50% of this timer + a renewal request is sent by the client . This is the next + Object atiL2DHCPReacquisitionTimer." + ::= {atiL2DHCPTimerGroup 1} + + +atiL2DHCPReacquisitionTimer OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "When the client/server reaches the BOUND state, this is + one of the parameters set by the server. + + Mentioned in RFC2131 4.4.5 as T1, this renewal time + period in secs for the DHCP client is for using IP address + on lease from the server Once the Reacquisition Timer + period in secs after the lease period is reached, + the client sends a DHCPREQUEST to the DHCP server + requesting for renewal of the lease. Default would be 50% + of the Lease timer which is represeneted by the above + object. The client moves from BOUND to RENEW state once + the DHCPREQUEST is sent after time T1 secs is passed from + the start of to release time. T1 is always less than T2 + ( see below for 'T2') which is less than the lease Timer + period." + ::= {atiL2DHCPTimerGroup 2} + + +atiL2DHCPExpirationTimer OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "When the client/server reaches the BOUND state, this is + one of the parameters set by the server. + + Mentioned in RFC2131 4.4.5 as T2,this Expiration time + period in secs is the time period in secs during which + DHCP has gone through the BOUND->RENEWAL state. After T1 + secs and when the state machine reaches T2 secs, + ( T1 < T2 < lease period), DHCP client sends another + DHCPREQUEST to the server asking the server to renew the + lease for the IP parameters. By default it would be 87.5% + of the Lease timer .If there is DHCPACK then the DHCP + client moves from REBIND to BOUND. Else it moves to INIT + state where it starts all over again sending a request for + DHCPDISCOVER." + ::= {atiL2DHCPTimerGroup 3 } + + +-- +-- atiL2DeviceGroup +-- + +atiL2deviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2deviceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The table contains the mapping of all devices + in the chassis." + ::= { atiL2DeviceGroup 1} + + +atiL2deviceEntry OBJECT-TYPE + SYNTAX AtiL2deviceEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The device entry in the DeviceTable." + INDEX { atiL2deviceIndex } + ::= { atiL2deviceTable 1 } + + +AtiL2deviceEntry ::= + SEQUENCE { + atiL2deviceIndex + INTEGER, + atiL2deviceDescr + DisplayString, + atiL2deviceProductType + INTEGER, + atiL2devicePortCount + INTEGER, + atiL2deviceSecurityConfig + INTEGER, + atiL2deviceSecurityAction + INTEGER, + atiL2deviceDebugAvailableBytes + INTEGER, + atiL2deviceMDA1Type + INTEGER, + atiL2deviceMDA2Type + INTEGER, + atiL2deviceReset + INTEGER + } + + +atiL2deviceIndex OBJECT-TYPE + SYNTAX INTEGER(1..8) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Slot number in the chassis where the device is + installed." + ::= { atiL2deviceEntry 2 } + + +atiL2deviceDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A textual description of the device." + ::= { atiL2deviceEntry 3 } + + +atiL2deviceProductType OBJECT-TYPE + SYNTAX INTEGER { + at-8324(1), + at-8316F(2), + at-8124XL-V2(3), + at-8326GB(4), + at-9410GB(5), + at-8350GB(6), + other(20) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object will return Product Type." + ::= { atiL2deviceEntry 4 } + + + +atiL2devicePortCount OBJECT-TYPE + SYNTAX INTEGER (1..1024) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ports contained within the device. + Valid range is 1-32. Within each device, the + ports are uniquely numbered in the range from + 1 to maxportCapacity." + ::= { atiL2deviceEntry 5} + + +atiL2deviceSecurityConfig OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + enabled-with-learning-locked(2), + limited-enabled(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Security feature configuration Object.The Security + disable would let the device carry on the + learn-new-address-as-it-comes-in mode as usual.When + security is enabled-with-learning-locked, the learning + of new address is stopped and the addresses locked in + the device is used as the security Database. If an + address comes in which is not present in the Device + Security Database, then any of the atiL2SecurityAction + Configured is triggered. When limited-enabled is + selected, a per-port atiL2PortSecurityNumberOfAddresses + specify the max number of MACs to be learned." + ::= { atiL2deviceEntry 6 } + + +atiL2deviceSecurityAction OBJECT-TYPE + SYNTAX INTEGER { + send-trap-only(1), + disable-port-only(2), + disable-port-and-send-trap(3), + do-nothing(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Security Action to be carried when the + atiL2SecurityConfig is enabled-with-learning-locked + or limted-enabled." + ::= { atiL2deviceEntry 7 } + + +atiL2deviceDebugAvailableBytes OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is strictly for Debug reason and this object + should not be believed as the correct number." + ::= { atiL2deviceEntry 8} + + +atiL2deviceMDA1Type OBJECT-TYPE + SYNTAX INTEGER { + ten-100rj45-mii(1), + hundredfiber-mii(2), + oneGb-rj45(3), + oneGb-Fiber(4), + none(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object returns the MDA type of the Uplink + port. The values of 1 and 2 are the only one + present in 81XX. 82XX has all the values + supported. This object returns the MDA type of + the Uplink Port named 'A'. It returns 'none' + if a 'A' MDA slot is not installed." + ::= { atiL2deviceEntry 9 } + + +atiL2deviceMDA2Type OBJECT-TYPE + SYNTAX INTEGER { + ten-100rj45-mii(1), + hundredfiber-mii(2), + oneGb-rj45(3), + oneGb-Fiber(4), + none(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This Object is supported in 81XX 82XX product + lines. The values of 1 and 2 are the only one + present in 81XX. 82XX has all the values + supported. This object returns the MDA type of + the Uplink Port named 'B'. It returns 'none' + if a 'B' MDA slot is not installed." + ::= { atiL2deviceEntry 10 } + + +atiL2deviceReset OBJECT-TYPE + SYNTAX INTEGER { + switch-no-reset (1), + switch-reset (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting this object to 'switch-reset' will + cause the switch to perform a hardware reset + within approximately 4-6 seconds. Setting this + object to 'switch-no-reset will have no effect. + The value 'no-reset' will be returned whenever + this object is retrieved." + ::= { atiL2deviceEntry 11 } + +-- +-- atiL2EthernetStatsGroup (Ethernet Monitor Group) +-- +-- The Monitor group contains statistics measured +-- per module identified by the module Id. +-- These statistics take the form of free running counters that start +-- from zero. + + +atiL2EthMonStatsGroup OBJECT IDENTIFIER ::= { atiL2EthernetStatsGroup 1} +atiL2EthErrStatsGroup OBJECT IDENTIFIER ::= { atiL2EthernetStatsGroup 2} + + +atiL2EthMonStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2EthMonStatsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of statistics entries." + ::= { atiL2EthMonStatsGroup 1 } + + +atiL2EthMonStatsEntry OBJECT-TYPE + SYNTAX AtiL2EthMonStatsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A collection of statistics kept for a particular port." + INDEX {atiL2EthMonModuleId } + ::= { atiL2EthMonStatsTable 1 } + + +AtiL2EthMonStatsEntry ::= + SEQUENCE { + atiL2EthMonModuleId + INTEGER, + atiL2EthMonRxGoodFrames + Counter, + atiL2EthMonTxGoodFrames + Counter, + atiL2EthMonTxTotalBytes + Counter , + atiL2EthMonTxDeferred + Counter , + atiL2EthMonTxCollisions + Counter, + atiL2EthMonTxBroadcastFrames + Counter, + atiL2EthMonTxMulticastFrames + Counter, + atiL2EthMonRxOverruns + Counter + } + + +atiL2EthMonModuleId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This Object Identifies the Module Id for which the + Statistics is collected." + ::= { atiL2EthMonStatsEntry 1 } + + +atiL2EthMonRxGoodFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Good Frames received on this + module." + ::= { atiL2EthMonStatsEntry 2 } + + +atiL2EthMonTxGoodFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Good Frames Transmitted by this + module." + ::= { atiL2EthMonStatsEntry 3 } + + +atiL2EthMonTxTotalBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Bytes transmitted from this + module." + ::= { atiL2EthMonStatsEntry 4 } + + +atiL2EthMonTxDeferred OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This is the count of first time Transmission attempt + which failed on an interface due to medium being busy." + ::= { atiL2EthMonStatsEntry 5 } + + +atiL2EthMonTxCollisions OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of collisions while switching on an + interface." + ::= { atiL2EthMonStatsEntry 6 } + + +atiL2EthMonTxBroadcastFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Transmit Broadcast Frames while + switching on an interface." + ::= { atiL2EthMonStatsEntry 7 } + + +atiL2EthMonTxMulticastFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Transmit Multicast while switching + on an interface." + ::= { atiL2EthMonStatsEntry 8 } + + +atiL2EthMonRxOverruns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Recieved Overrun Frames while + switching on an interface." + ::= { atiL2EthMonStatsEntry 9 } + +-- +-- The Following is a Per Port MonStats Table. +-- + +atiL2EthPortMonStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2EthPortMonStatsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of statistics entries per Port on a Module." + ::= { atiL2EthMonStatsGroup 2 } + + +atiL2EthPortMonStatsEntry OBJECT-TYPE + SYNTAX AtiL2EthPortMonStatsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A collection of statistics kept for a particular port." + INDEX {atiL2EthPortMonModuleId,atiL2EthPortMonPortId} + ::= { atiL2EthPortMonStatsTable 1 } + + +AtiL2EthPortMonStatsEntry ::= + SEQUENCE { + atiL2EthPortMonModuleId + INTEGER, + atiL2EthPortMonPortId + INTEGER, + atiL2EthPortMonRxGoodFrames + Counter, + atiL2EthPortMonTxGoodFrames + Counter, + atiL2EthPortMonTxTotalBytes + Counter , + atiL2EthPortMonTxDeferred + Counter , + atiL2EthPortMonTxCollisions + Counter, + atiL2EthPortMonTxBroadcastFrames + Counter, + atiL2EthPortMonTxMulticastFrames + Counter, + atiL2EthPortMonRxOverruns + Counter + } + + +atiL2EthPortMonModuleId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This Object Identifies the Module Id for which the + Statistics is collected." + ::= { atiL2EthPortMonStatsEntry 1 } + + +atiL2EthPortMonPortId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This Object Identifies the Port on the Module + recognised by EthMonPortModuleId for which the + Statistics is collected." + ::= { atiL2EthPortMonStatsEntry 2 } + + +atiL2EthPortMonRxGoodFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Good Frames received on this module." + ::= { atiL2EthPortMonStatsEntry 3 } + + +atiL2EthPortMonTxGoodFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Good Frames Transmitted by this + module." + ::= { atiL2EthPortMonStatsEntry 4 } + + +atiL2EthPortMonTxTotalBytes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Bytes transmitted from this module." + ::= { atiL2EthPortMonStatsEntry 5 } + + +atiL2EthPortMonTxDeferred OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS deprecated + DESCRIPTION + "This is the count of first time Transmission attempt + which failed on an interface due to medium being busy." + ::= { atiL2EthPortMonStatsEntry 6 } + + +atiL2EthPortMonTxCollisions OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of collisions while switching on an + interface." + ::= { atiL2EthPortMonStatsEntry 7 } + + +atiL2EthPortMonTxBroadcastFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Transmit Broadcast Frames on this + port and Module while switching on an interface." + ::= { atiL2EthPortMonStatsEntry 8 } + + +atiL2EthPortMonTxMulticastFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Transmit Multicast on this port + and Module while switching on an interface." + ::= { atiL2EthPortMonStatsEntry 9 } + + +atiL2EthPortMonRxOverruns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Recieved Overrun Frames on this + port and Module while switching on an interface." + ::= { atiL2EthPortMonStatsEntry 10 } + +-- +-- The Ethernet Error Statistics +-- +-- The Ethernet Error Statistics group contains certain errors +-- measured by the switch. These statistics take the form of +-- free running counters that start from zero. +-- + +atiL2EthErrStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2EthErrStatsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of statistics entries." + ::= { atiL2EthErrStatsGroup 1 } + + +atiL2EthErrorStatsEntry OBJECT-TYPE + SYNTAX AtiL2EthErrStatsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A collection of statistics kept for a particular port." + INDEX {atiL2EthErrModuleId } + ::= { atiL2EthErrStatsTable 1 } + + +AtiL2EthErrStatsEntry ::= + SEQUENCE { + atiL2EthErrModuleId + INTEGER, + atiL2EthErrorCRC + Counter, + atiL2EthErrorAlignment + Counter, + atiL2EthErrorRxBadFrames + Counter , + atiL2EthErrorLateCollisions + Counter, + atiL2EthErrorTxTotal + Counter + } + + +atiL2EthErrModuleId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This Object Identifies the Module Id for which the + Statistics is collected." + ::= { atiL2EthErrorStatsEntry 1 } + + +atiL2EthErrorCRC OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of CRC errors on received packets." + ::= { atiL2EthErrorStatsEntry 2 } + + +atiL2EthErrorAlignment OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of packets received that has alignment + errors." + ::= { atiL2EthErrorStatsEntry 3 } + + +atiL2EthErrorRxBadFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The counter is incremented when a bad frame was + received." + ::= { atiL2EthErrorStatsEntry 4 } + + +atiL2EthErrorLateCollisions OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object counts the number of times the collison was + detected in the port." + ::= { atiL2EthErrorStatsEntry 5 } + + +atiL2EthErrorTxTotal OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of error resulted from transfer operations." + ::= { atiL2EthErrorStatsEntry 6 } + +-- +-- EthErrStats per Port. +-- + +atiL2EthPortErrStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2EthPortErrStatsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of statistics entries." + ::= { atiL2EthErrStatsGroup 2 } + + +atiL2EthPortErrorStatsEntry OBJECT-TYPE + SYNTAX AtiL2EthPortErrStatsEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A collection of statistics kept for a particular port." + INDEX {atiL2EthPortErrModuleId, atiL2EthPortErrPortId} + ::= { atiL2EthPortErrStatsTable 1 } + + +AtiL2EthPortErrStatsEntry ::= + SEQUENCE { + atiL2EthPortErrModuleId + INTEGER, + atiL2EthPortErrPortId + INTEGER, + atiL2EthPortErrorCRC + Counter, + atiL2EthPortErrorAlignment + Counter, + atiL2EthPortErrorRxBadFrames + Counter , + atiL2EthPortErrorLateCollisions + Counter, + atiL2EthPortErrorTxTotal + Counter + } + + +atiL2EthPortErrModuleId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This Object Identifies the Module Id for which the + Statistics is collected." + ::= { atiL2EthPortErrorStatsEntry 1 } + + +atiL2EthPortErrPortId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This Object Identifies the Port on the Module + recognised by the above Object for which the + Statistics is collected." + ::= { atiL2EthPortErrorStatsEntry 2 } + + +atiL2EthPortErrorCRC OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of CRC errors on received packets." + ::= { atiL2EthPortErrorStatsEntry 3 } + + +atiL2EthPortErrorAlignment OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of packets received that has alignment + errors." + ::= { atiL2EthPortErrorStatsEntry 4 } + + +atiL2EthPortErrorRxBadFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The counter is incremented when a bad frame was + received." + ::= { atiL2EthPortErrorStatsEntry 5 } + + +atiL2EthPortErrorLateCollisions OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object counts the number of times the collison was + detected in the port." + ::= { atiL2EthPortErrorStatsEntry 6 } + + +atiL2EthPortErrorTxTotal OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Total number of error resulted from transfer operations." + ::= { atiL2EthPortErrorStatsEntry 7 } + + +-- +-- atiL2DevicePortConfigGroup +-- + +atiL2DevicePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2DevicePortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table of basic port configuration information." + ::= { atiL2DevicePortConfigGroup 1 } + + +atiL2DevicePortEntry OBJECT-TYPE + SYNTAX AtiL2DevicePortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the port config table." + INDEX { atiL2DeviceId,atiL2DevicePortNumber } + ::= { atiL2DevicePortTable 1 } + + +AtiL2DevicePortEntry ::= + SEQUENCE { + atiL2DeviceId + INTEGER, + atiL2DevicePortNumber + INTEGER, + atiL2DevicePortName + DisplayString, + atiL2DevicePortAutosenseOrHalfDuplex + INTEGER, + atiL2DevicePortLinkState + INTEGER, + atiL2DevicePortDuplexStatus + INTEGER , + atiL2DevicePortSpeed + INTEGER, + atiL2DevicePortState + INTEGER, + atiL2DevicePortTransmitPacingConfig + INTEGER, + atiL2DevicePortSTPConfig + INTEGER, + atiL2DevicePortBridgeid + INTEGER, + atiL2DevicePortSTPCost + INTEGER, + atiL2DevicePortSTPPriority + INTEGER, + atiL2DevicePortFlowControlEnable + INTEGER, + atiL2DevicePortBackPressureEnable + INTEGER, + atiL2DevicePortVlanTagPriorityConfig + INTEGER, + atiL2DevicePortQOSPriorityConfig + INTEGER + } + + +atiL2DeviceId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object identifies the Module Id of the switch + Stack." + ::= { atiL2DevicePortEntry 1 } + + +atiL2DevicePortNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object identifies the Port on atiL2ModuleId of + the switch Stack." + ::= { atiL2DevicePortEntry 2 } + + +atiL2DevicePortName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..20)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This attribute associates a user defined string name + with the port." + ::= { atiL2DevicePortEntry 3 } + + +atiL2DevicePortAutosenseOrHalfDuplex OBJECT-TYPE + SYNTAX INTEGER { + portAutoSense(1), + forceHalfDuplex-10M(2), + forceHalfDuplex-100M(3), + forceFullDuplex-10M(4), + forceFullDuplex-100M(5), + forceHalfDuplex-1G(6), + forceFullDuplex-1G(7) + + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This attribute allows an administrative request to + configure whether this port can Autosense or Force + the Half Duplex or Full Duplex on different Port + Speeds." + ::= { atiL2DevicePortEntry 4 } + + +atiL2DevicePortLinkState OBJECT-TYPE + SYNTAX INTEGER { + online(1), + offline(2) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This attribute allows an administrative request to + read the status of link state on this port." + ::= { atiL2DevicePortEntry 5 } + + +atiL2DevicePortDuplexStatus OBJECT-TYPE + SYNTAX INTEGER { + fullDuplex(1), + halfDuplex(2), + autosense(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This attribute allows an administrative request to + read the status of Duplex on this port." + ::= { atiL2DevicePortEntry 6 } + + +atiL2DevicePortSpeed OBJECT-TYPE + SYNTAX INTEGER { + tenMBits(1), + hundredMBits(2), + gigaBits(3), + unknown(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This attribute allows an administrative request to + read or write the speed of this port. This Object + is valid only for 10/100Mbits and gigaBits ports. + The only gigabit port that can be set is that of + AT-A14 and it's values can be either 2 or 3." + ::= { atiL2DevicePortEntry 7 } + + +atiL2DevicePortState OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + blocking(3), + listening(4), + learning(5) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This attribute allows an administrative request to + disable or enable communications on this port.It also + responds with the status of the port .Except enabled(1) and + disabled(2), all values are read-only status." + ::= { atiL2DevicePortEntry 8 } + + +atiL2DevicePortTransmitPacingConfig OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object is supported on at36XX product line Only. + This attribute allows the transmit Pacing to be + enabled or disabled." + ::= { atiL2DevicePortEntry 9 } + + +atiL2DevicePortSTPConfig OBJECT-TYPE + SYNTAX INTEGER { + enable (1), + disable (2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This attribute allows a bridging Mode to be configured + with either Spanning Tree enabled or disabled. When + Spanning tree is enabled, make sure that this port is + belonging to a valid Bridge_id. Spanning Tree is + enabled only when a valid Bridge_id is set." + ::= { atiL2DevicePortEntry 10} + + +atiL2DevicePortBridgeid OBJECT-TYPE + SYNTAX INTEGER (1..64) + ACCESS read-write + STATUS mandatory + DESCRIPTION + " The Bridge to which this port belongs to." + ::= { atiL2DevicePortEntry 11 } + + +atiL2DevicePortSTPCost OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Cost of the Spanning Tree Protocol.This object + is valid only when STP is enabled." + ::= { atiL2DevicePortEntry 12 } + + +atiL2DevicePortSTPPriority OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-write + STATUS mandatory + DESCRIPTION + " The Priority of the spanning Tree Protocol. + This object is valid when STP is enabled." + ::= { atiL2DevicePortEntry 13 } + + +atiL2DevicePortFlowControlEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(1), + enable(2) + } + ACCESS read-write + STATUS deprecated + DESCRIPTION + "This per-port attribute describes whether the port + identified has flow Control Enabled or not. Flow + Control on Full Duplex and Half Duplex is detected + and automatically, flow control accordingly is + taken care of. By Default, Flow Control is Disabled." + ::= { atiL2DevicePortEntry 14 } + + +atiL2DevicePortBackPressureEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(1), + enable(2) + } + ACCESS read-write + STATUS deprecated + DESCRIPTION + "This per-port attribute describes whether the port + identified has Back Pressure Enabled or not. By + Default, Back Pressure is Disabled." + ::= { atiL2DevicePortEntry 15 } + + +atiL2DevicePortVlanTagPriorityConfig OBJECT-TYPE + SYNTAX INTEGER { + use-vlan-priority(1), + override-vlan-priority(2) + } + ACCESS read-write + STATUS deprecated + DESCRIPTION + "This per-port attribute allows the configuration of + the Tag Priority to be Override or Use the Tag + Priority. By Default, all ports use Vlan Tag priority." + ::= { atiL2DevicePortEntry 16 } + + +atiL2DevicePortQOSPriorityConfig OBJECT-TYPE + SYNTAX INTEGER { + high-priority(1), + normal-priority(2) + } + ACCESS read-write + STATUS deprecated + DESCRIPTION + "This per-port attribute is applicable only to + at-8324, at-8124XL-V2 and at-8316 and it allows for + the configuration of the Priority of the port to be + high or Low. In a switch environment, Ports with high + Priority and traffic from and to the ports get more + priority when compared with those with normal + priority. By Default, all ports have Normal Priority." + ::= { atiL2DevicePortEntry 17 } + + +--atiL2DevicePortSecurityNumberOfAddresses OBJECT-TYPE +-- SYNTAX INTEGER +-- ACCESS read-write +-- STATUS mandatory +-- DESCRIPTION +-- "This object configures the Max number of addresses +-- at an instance to be learnt by the device. If the +-- learnt addresses number is above this number, then +-- the atiL2SecurityAction is triggered . when the +-- number of learnt addresses exceeds this number ,the +-- the atiL2SecurityAction is triggered only if +-- atiL2SecurityConfig is set to limited-enalbled. Else +-- nothing is triggered." +-- ::= { atiL2DevicePortEntry 16 } + +-- +-- atiL2VlanConfigGroup +-- + +atiL2BasicVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2BasicVlanEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table of Virtual LAN configured." + ::= { atiL2VlanConfigGroup 1 } + + +atiL2BasicVlanEntry OBJECT-TYPE + SYNTAX AtiL2BasicVlanEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing VLAN information." + INDEX { atiL2BeVlanIndex } + ::= { atiL2BasicVlanTable 1 } + + +AtiL2BasicVlanEntry ::= + SEQUENCE { + atiL2BeVlanIndex + INTEGER, + atiL2BeVlanName + DisplayString, + atiL2BeVlanTagId + INTEGER, + atiL2BeVlanModule1UntaggedPorts + DisplayString, + atiL2BeVlanModule1TaggedPorts + DisplayString, + atiL2BeVlanModule2UntaggedPorts + DisplayString, + atiL2BeVlanModule2TaggedPorts + DisplayString, + atiL2BeVlanModule3UntaggedPorts + DisplayString, + atiL2BeVlanModule3TaggedPorts + DisplayString, + atiL2BeVlanModule4UntaggedPorts + DisplayString, + atiL2BeVlanModule4TaggedPorts + DisplayString, + atiL2BeVlanModule5UntaggedPorts + DisplayString, + atiL2BeVlanModule5TaggedPorts + DisplayString, + atiL2BeVlanModule6UntaggedPorts + DisplayString, + atiL2BeVlanModule6TaggedPorts + DisplayString, + atiL2BeVlanModule7UntaggedPorts + DisplayString, + atiL2BeVlanModule7TaggedPorts + DisplayString, + atiL2BeVlanModule8UntaggedPorts + DisplayString, + atiL2BeVlanModule8TaggedPorts + DisplayString, + atiL2BeVlanRowStatus + INTEGER + } + + +atiL2BeVlanIndex OBJECT-TYPE + SYNTAX INTEGER (1..64) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object identifies the VLAN." + ::= { atiL2BasicVlanEntry 1 } + + +atiL2BeVlanName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..20)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This attribute associates a user defined string with + the Virtual LAN. To configure a new VLAN, do 'set' + operation on this object with the VLAN name. To delete + a VLAN, do 'set' operation with string '*<module_num>', + where <module_num> is the module number (1..8) from + which the delete request is being sent. If a vlan is + being created or modified, before configuring any of + the objects in this row, set atiL2VlanStatus to + 'under-construction' and once configured with all the + information, set the same object to operational. This + step is not required when deleting a vlan." + ::= { atiL2BasicVlanEntry 2 } + + +atiL2BeVlanTagId OBJECT-TYPE + SYNTAX INTEGER (1..4095) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object configures the VId in the Tag Information header + in accordance with 802.1q spec. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 3 } + + +atiL2BeVlanModule1UntaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module that + participate in the Vlan with the atiL2BeVlanName. The Format + of the input string would be like '1,2,5,7,12..15,18-22,26'. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 4 } + + +atiL2BeVlanModule1TaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is + not set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 5 } + + +atiL2BeVlanModule2UntaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is + not set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 6 } + + +atiL2BeVlanModule2TaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is + not set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 7 } + + +atiL2BeVlanModule3UntaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 8 } + + +atiL2BeVlanModule3TaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 9 } + + +atiL2BeVlanModule4UntaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 10 } + + +atiL2BeVlanModule4TaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 11 } + + +atiL2BeVlanModule5UntaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 12 } + + +atiL2BeVlanModule5TaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 13 } + + +atiL2BeVlanModule6UntaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 14 } + + +atiL2BeVlanModule6TaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 15 } + + +atiL2BeVlanModule7UntaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 16 } + + +atiL2BeVlanModule7TaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 17 } + + +atiL2BeVlanModule8UntaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 18 } + + +atiL2BeVlanModule8TaggedPorts OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This Object builds the Output Ports on the Module + atiL2BeVlanModuleId that participate in the Vlan with the + atiL2BeVlanName. The Format of the input string would be + like '1,2,5,7,12'. + + Please select the Module by setting the atiL2BeVlanModuleId + with the Module Id and then set the port mask. If this is not + set, by default this will be set to 1. + + Before configuring any of the objects in this row , set the + atiL2VlanStatus to 'under-construction' and once configured + with all the information, please set the same object to + operational." + ::= { atiL2BasicVlanEntry 19 } + + +atiL2BeVlanRowStatus OBJECT-TYPE + SYNTAX INTEGER { + idle(1), + operational(2), + under-construction(3), + not-operational(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This object is used to create or modify a vlan. The user + should first set this object to under-construction. After + the vlan name, the tag Id and the ports belonging to the vlan + are configured/modified, this object should be set to + operational. If it is not set to operational, the whole row + will be lost and the vlan will not be configured in the switch." + ::= { atiL2BasicVlanEntry 20 } + +-- +-- Port2VlanTable. +-- + +atiL2Port2VlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2Port2VlanEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table of per port Virtual LAN configuration." + ::= { atiL2VlanConfigGroup 2 } + + +atiL2Port2VlanEntry OBJECT-TYPE + SYNTAX AtiL2Port2VlanEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the table, containing per port VLAN + information." + INDEX {atiL2PvModuleId, atiL2PvPortNumber } + ::= { atiL2Port2VlanTable 1 } + + +AtiL2Port2VlanEntry ::= + SEQUENCE { + atiL2PvModuleId + INTEGER, + atiL2PvPortNumber + INTEGER, + atiL2PvVlanName + DisplayString + } + + +atiL2PvModuleId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object identifies the Module Id on the switching + Stack." + ::= { atiL2Port2VlanEntry 1 } + + +atiL2PvPortNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object identifies the port on the Module + atiL2PvModuleId ." + ::= { atiL2Port2VlanEntry 2 } + + +atiL2PvVlanName OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This attribute associates a user defined string with + the Virtual LAN. This Object is the same as atiL2BeVlanName. + Please make sure to give the same string as atiL2BeVlanName." + ::= { atiL2Port2VlanEntry 3 } + + +-- +-- atiL2IfExt Group +-- + +atiL2IfExtensions OBJECT IDENTIFIER ::= { atiL2IfExt 1 } + +atiIfExtnTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiIfExtnEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of interface entries. The number of entries is + given by the value of ifNumber." + ::= { atiL2IfExtensions 1 } + + +atiIfExtnEntry OBJECT-TYPE + SYNTAX AtiIfExtnEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An interface entry containing objects at the + subnetwork layer and below for a particular interface." + INDEX { atiIfExtnIndex } + ::= { atiIfExtnTable 1 } + + +AtiIfExtnEntry ::= SEQUENCE { + atiIfExtnIndex + INTEGER, + atiIfExtnModuleId + INTEGER, + atiIfExtnPort + INTEGER +} + + +atiIfExtnIndex OBJECT-TYPE + SYNTAX INTEGER(1..256) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each interface corresponding to the + ifIndex value for the same interface." + ::= { atiIfExtnEntry 1 } + + +atiIfExtnModuleId OBJECT-TYPE + SYNTAX INTEGER(1..8) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The unit number associated with this particular + interface." + ::= { atiIfExtnEntry 2 } + + +atiIfExtnPort OBJECT-TYPE + SYNTAX INTEGER(1..32) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The port number within a unit or slot." + ::= { atiIfExtnEntry 3 } + + +-- +-- atiL2BridgeMib +-- + +-- the atiL2BrBase Table + +atiL2BrBaseTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2BrBaseEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table of basic bridge information." + ::= { atiL2BrBase 1 } + + +atiL2BrBaseEntry OBJECT-TYPE + SYNTAX AtiL2BrBaseEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the atiL2BrBaseTable." + INDEX { atiL2BrBaseLanId } + ::= { atiL2BrBaseTable 1 } + + +AtiL2BrBaseEntry ::= + SEQUENCE { + atiL2BrBaseLanId + INTEGER, + atiL2BrBaseBridgeAddress + MacAddress, + atiL2BrBaseNumPorts + INTEGER, + atiL2BrBaseType + INTEGER + } + +atiL2BrBaseLanId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object uniquely identifies the lan or + Virtual lan." + ::= { atiL2BrBaseEntry 1 } + + +atiL2BrBaseBridgeAddress OBJECT-TYPE + SYNTAX MacAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The MAC address used by this bridge when it must + be referred to in a unique fashion. It is + recommended that this be the numerically smallest + MAC address of all ports that belong to this + bridge. However it is only required to be unique. + When concatenated with atiL2BrStpPriority a unique + BridgeIdentifier is formed which is used in the + Spanning Tree Protocol." + REFERENCE + "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5" + ::= { atiL2BrBaseEntry 2 } + + +atiL2BrBaseNumPorts OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ports controlled by this bridging + entity." + REFERENCE + "IEEE 802.1D-1990: Section 6.4.1.1.3" + ::= { atiL2BrBaseEntry 3 } + + +atiL2BrBaseType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + transparent-only(2), + sourceroute-only(3), + srt(4) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Indicates what type of bridging this bridge can + perform. If a bridge is actually performing a + certain type of bridging this will be indicated by + entries in the port table for the given type." + ::= { atiL2BrBaseEntry 4 } + + +-- The Generic Bridge Port Table + +atiL2BrBasePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2BrBasePortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table that contains generic information about + every port that is associated with this bridge. + Transparent, source-route, and srt ports are + included." + ::= { atiL2BrBase 4 } + + +atiL2BrBasePortEntry OBJECT-TYPE + SYNTAX AtiL2BrBasePortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of information for each port of the + bridge." + REFERENCE + "IEEE 802.1D-1990: Section 6.4.2, 6.6.1" + INDEX { atiL2BrBasePortLanId, atiL2BrBasePort } + ::= { atiL2BrBasePortTable 1 } + + +AtiL2BrBasePortEntry ::= + SEQUENCE { + atiL2BrBasePortLanId + INTEGER, + atiL2BrBasePort + INTEGER, + atiL2BrBasePortIfIndex + INTEGER, + atiL2BrBasePortCircuit + OBJECT IDENTIFIER, + atiL2BrBasePortDelayExceededDiscards + Counter, + atiL2BrBasePortMtuExceededDiscards + Counter + } + +atiL2BrBasePortLanId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object uniquely identifies the lan or + Virtual lan." + ::= { atiL2BrBasePortEntry 1 } + + +atiL2BrBasePort OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The port number of the port for which this entry + contains bridge management information." + ::= { atiL2BrBasePortEntry 2 } + + +atiL2BrBasePortIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of the instance of the ifIndex object, + defined in MIB-II, for the interface corresponding + to this port." + ::= { atiL2BrBasePortEntry 3 } + + +atiL2BrBasePortCircuit OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "For a port which (potentially) has the same value + of atiL2BrBasePortIfIndex as another port on the + same bridge, this object contains the name of an + object instance unique to this port. For example, + in the case where multiple ports correspond one- + to-one with multiple X.25 virtual circuits, this + value might identify an (e.g., the first) object + instance associated with the X.25 virtual circuit + corresponding to this port. + + For a port which has a unique value of + atiL2BrBasePortIfIndex, this object can have the + value { 0 0 }." + ::= { atiL2BrBasePortEntry 4 } + + +atiL2BrBasePortDelayExceededDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames discarded by this port due + to excessive transit delay through the bridge. It + is incremented by both transparent and source + route bridges." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { atiL2BrBasePortEntry 5 } + +atiL2BrBasePortMtuExceededDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames discarded by this port due + to an excessive size. It is incremented by both + transparent and source route bridges." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { atiL2BrBasePortEntry 6 } + + +-- +-- the atiL2BrStp group +-- +-- Implementation of the atiL2BrStp group is optional. It is +-- implemented by those bridges that support the Spanning Tree +-- Protocol. + +atiL2BrStpTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2BrStpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table of bridge spanning tree information." + ::= { atiL2BrStp 1 } + +atiL2BrStpEntry OBJECT-TYPE + SYNTAX AtiL2BrStpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the atiL2BrStpTable." + INDEX { atiL2BrStpLanId } + ::= { atiL2BrStpTable 1 } + + +AtiL2BrStpEntry ::= + SEQUENCE { + atiL2BrStpLanId + INTEGER, + atiL2BrStpProtocolSpecification + INTEGER, + atiL2BrStpPriority + INTEGER, + atiL2BrStpTimeSinceTopologyChange + TimeTicks, + atiL2BrStpTopChanges + Counter, + atiL2BrStpDesignatedRoot + BridgeId, + atiL2BrStpRootCost + INTEGER, + atiL2BrStpRootPort + INTEGER, + atiL2BrStpMaxAge + Timeout, + atiL2BrStpHelloTime + Timeout, + atiL2BrStpHoldTime + INTEGER, + atiL2BrStpForwardDelay + Timeout, + atiL2BrStpBridgeMaxAge + Timeout, + atiL2BrStpBridgeHelloTime + Timeout, + atiL2BrStpBridgeForwardDelay + Timeout + } + + +atiL2BrStpLanId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object uniquely identifies the lan or + Virtual lan." + ::= { atiL2BrStpEntry 1 } + +atiL2BrStpProtocolSpecification OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + decLb100(2), + ieee8021d(3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An indication of what version of the Spanning + Tree Protocol is being run. The value + 'decLb100(2)' indicates the DEC LANbridge 100 + Spanning Tree protocol. IEEE 802.1d + implementations will return 'ieee8021d(3)'. If + future versions of the IEEE Spanning Tree Protocol + are released that are incompatible with the + current version a new value will be defined." + ::= { atiL2BrStpEntry 2 } + +atiL2BrStpPriority OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The value of the write-able portion of the Bridge + ID, i.e., the first two octets of the (8 octet + long) Bridge ID. The other (last) 6 octets of the + Bridge ID are given by the value of + atiL2BrBaseBridgeAddress." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.7" + ::= { atiL2BrStpEntry 3 } + + +atiL2BrStpTimeSinceTopologyChange OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The time (in hundredths of a second) since the + last time a topology change was detected by the + bridge entity." + REFERENCE + "IEEE 802.1D-1990: Section 6.8.1.1.3" + ::= { atiL2BrStpEntry 4 } + + +atiL2BrStpTopChanges OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of topology changes detected by + this bridge since the management entity was last + reset or initialized." + REFERENCE + "IEEE 802.1D-1990: Section 6.8.1.1.3" + ::= { atiL2BrStpEntry 5 } + + +atiL2BrStpDesignatedRoot OBJECT-TYPE + SYNTAX BridgeId + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The bridge identifier of the root of the spanning + tree as determined by the Spanning Tree Protocol + as executed by this node. This value is used as + the Root Identifier parameter in all Configuration + Bridge PDUs originated by this node." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.1" + ::= { atiL2BrStpEntry 6 } + + +atiL2BrStpRootCost OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The cost of the path to the root as seen from + this bridge." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.2" + ::= { atiL2BrStpEntry 7 } + + +atiL2BrStpRootPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The port number of the port which offers the + lowest cost path from this bridge to the root + bridge." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.3" + ::= { atiL2BrStpEntry 8 } + + +atiL2BrStpMaxAge OBJECT-TYPE + SYNTAX Timeout + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum age of Spanning Tree Protocol + information learned from the network on any port + before it is discarded, in units of hundredths of + a second. This is the actual value that this + bridge is currently using." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.4" + ::= { atiL2BrStpEntry 9 } + + +atiL2BrStpHelloTime OBJECT-TYPE + SYNTAX Timeout + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The amount of time between the transmission of + Configuration bridge PDUs by this node on any port + when it is the root of the spanning tree or trying + to become so, in units of hundredths of a second. + This is the actual value that this bridge is + currently using." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.5" + ::= { atiL2BrStpEntry 10 } + + +atiL2BrStpHoldTime OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This time value determines the interval length + during which no more than two Configuration bridge + PDUs shall be transmitted by this node, in units + of hundredths of a second." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.14" + ::= { atiL2BrStpEntry 11 } + + +atiL2BrStpForwardDelay OBJECT-TYPE + SYNTAX Timeout + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This time value, measured in units of hundredths + of a second, controls how fast a port changes its + spanning state when moving towards the Forwarding + state. The value determines how long the port + stays in each of the Listening and Learning + states, which precede the Forwarding state. This + value is also used, when a topology change has + been detected and is underway, to age all dynamic + entries in the Forwarding Database. [Note that + this value is the one that this bridge is + currently using, in contrast to + atiL2BrStpBridgeForwardDelay which is the value that + this bridge and all others would start using + if/when this bridge were to become the root.]" + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.6" + ::= { atiL2BrStpEntry 12 } + + +atiL2BrStpBridgeMaxAge OBJECT-TYPE + SYNTAX Timeout (600..4000) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The value that all bridges use for MaxAge when + this bridge is acting as the root. Note that + 802.1D-1990 specifies that the range for this + parameter is related to the value of + atiL2BrStpBridgeHelloTime. The granularity of this + timer is specified by 802.1D-1990 to be 1 second. + An agent may return a badValue error if a set is + attempted to a value which is not a whole number + of seconds." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.8" + ::= { atiL2BrStpEntry 13 } + + +atiL2BrStpBridgeHelloTime OBJECT-TYPE + SYNTAX Timeout (100..1000) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The value that all bridges use for HelloTime when + this bridge is acting as the root. The + granularity of this timer is specified by 802.1D- + 1990 to be 1 second. An agent may return a + badValue error if a set is attempted to a value + which is not a whole number of seconds." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.9" + ::= { atiL2BrStpEntry 14 } + + +atiL2BrStpBridgeForwardDelay OBJECT-TYPE + SYNTAX Timeout (400..3000) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The value that all bridges use for ForwardDelay + when this bridge is acting as the root. Note that + 802.1D-1990 specifies that the range for this + parameter is related to the value of + atiL2BrStpBridgeMaxAge. The granularity of this + timer is specified by 802.1D-1990 to be 1 second. + An agent may return a badValue error if a set is + attempted to a value which is not a whole number + of seconds." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.3.10" + ::= { atiL2BrStpEntry 15 } + + +-- +-- The Spanning Tree Port Table +-- + +atiL2BrStpPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2BrStpPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table that contains port-specific information + for the Spanning Tree Protocol." + ::= { atiL2BrStp 15 } + + +atiL2BrStpPortEntry OBJECT-TYPE + SYNTAX AtiL2BrStpPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of information maintained by every port + about the Spanning Tree Protocol state for that + port." + INDEX { atiL2BrStpPortLanId, atiL2BrStpPort } + ::= { atiL2BrStpPortTable 1 } + + +AtiL2BrStpPortEntry ::= + SEQUENCE { + atiL2BrStpPortLanId + INTEGER, + atiL2BrStpPort + INTEGER, + atiL2BrStpPortPriority + INTEGER, + atiL2BrStpPortState + INTEGER, + atiL2BrStpPortEnable + INTEGER, + atiL2BrStpPortPathCost + INTEGER, + atiL2BrStpPortDesignatedRoot + BridgeId, + atiL2BrStpPortDesignatedCost + INTEGER, + atiL2BrStpPortDesignatedBridge + BridgeId, + atiL2BrStpPortDesignatedPort + OCTET STRING, + atiL2BrStpPortForwardTransitions + Counter + } + + +atiL2BrStpPortLanId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object uniquely identifies the lan or + Virtual lan." + ::= { atiL2BrStpPortEntry 1 } + + +atiL2BrStpPort OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The port number of the port for which this entry + contains Spanning Tree Protocol management + information." + REFERENCE + "IEEE 802.1D-1990: Section 6.8.2.1.2" + ::= { atiL2BrStpPortEntry 2 } + + +atiL2BrStpPortPriority OBJECT-TYPE + SYNTAX INTEGER (0..255) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The value of the priority field which is + contained in the first (in network byte order) + octet of the (2 octet long) Port ID. The other + octet of the Port ID is given by the value of + atiL2BrStpPort." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.1" + ::= { atiL2BrStpPortEntry 3 } + + +atiL2BrStpPortState OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + blocking(2), + listening(3), + learning(4), + forwarding(5), + broken(6) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The port's current state as defined by + application of the Spanning Tree Protocol. This + state controls what action a port takes on + reception of a frame. If the bridge has detected + a port that is malfunctioning it will place that + port into the broken(6) state. For ports which + are disabled (see atiL2BrStpPortEnable), this object + will have a value of disabled(1)." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.2" + ::= { atiL2BrStpPortEntry 4 } + + +atiL2BrStpPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The enabled/disabled status of the port." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.2" + ::= { atiL2BrStpPortEntry 5 } + + +atiL2BrStpPortPathCost OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The contribution of this port to the path cost of + paths towards the spanning tree root which include + this port. 802.1D-1990 recommends that the + default value of this parameter be in inverse + proportion to the speed of the attached LAN." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.3" + ::= { atiL2BrStpPortEntry 6 } + + +atiL2BrStpPortDesignatedRoot OBJECT-TYPE + SYNTAX BridgeId + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The unique Bridge Identifier of the Bridge + recorded as the Root in the Configuration BPDUs + transmitted by the Designated Bridge for the + segment to which the port is attached." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.4" + ::= { atiL2BrStpPortEntry 7 } + + +atiL2BrStpPortDesignatedCost OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The path cost of the Designated Port of the + segment connected to this port. This value is + compared to the Root Path Cost field in received + bridge PDUs." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.5" + ::= { atiL2BrStpPortEntry 8 } + + +atiL2BrStpPortDesignatedBridge OBJECT-TYPE + SYNTAX BridgeId + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Bridge Identifier of the bridge which this + port considers to be the Designated Bridge for + this port's segment." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.6" + ::= { atiL2BrStpPortEntry 9 } + + +atiL2BrStpPortDesignatedPort OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Port Identifier of the port on the Designated + Bridge for this port's segment." + REFERENCE + "IEEE 802.1D-1990: Section 4.5.5.7" + ::= { atiL2BrStpPortEntry 10 } + + +atiL2BrStpPortForwardTransitions OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of times this port has transitioned + from the Learning state to the Forwarding state." + ::= { atiL2BrStpPortEntry 11 } + +-- +-- the atiL2BrTp group +-- +-- Implementation of the atiL2BrTp group is optional. It is +-- implemented by those bridges that support the transparent +-- bridging mode. A transparent or SRT bridge will implement +-- this group. + + +atiL2BrTpTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2BrTpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Table of transparent bridging information." + ::= { atiL2BrTp 1 } + + +atiL2BrTpEntry OBJECT-TYPE + SYNTAX AtiL2BrTpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An entry in the atiL2BrTpTable." + INDEX { atiL2BrTpLanId } + ::= { atiL2BrTpTable 1 } + + +AtiL2BrTpEntry ::= + SEQUENCE { + atiL2BrTpLanId + INTEGER, + atiL2BrTpLearnedEntryDiscards + Counter, + atiL2BrTpAgingTime + INTEGER + } + + +atiL2BrTpLanId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object uniquely identifies the lan or + Virtual lan." + ::= { atiL2BrTpEntry 1 } + + +atiL2BrTpLearnedEntryDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Forwarding Database entries, + which have been or would have been learnt, but + have been discarded due to a lack of space to + store them in the Forwarding Database. If this + counter is increasing, it indicates that the + Forwarding Database is regularly becoming full (a + condition which has unpleasant performance effects + on the subnetwork). If this counter has a + significant value but is not presently increasing, + it indicates that the problem has been occurring + but is not persistent." + REFERENCE + "IEEE 802.1D-1990: Section 6.7.1.1.3" + ::= { atiL2BrTpEntry 2 } + + +atiL2BrTpAgingTime OBJECT-TYPE + SYNTAX INTEGER (10..1000000) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The timeout period in seconds for aging out + dynamically learned forwarding information. + 802.1D-1990 recommends a default of 300 seconds." + REFERENCE + "IEEE 802.1D-1990: Section 6.7.1.1.3" + ::= { atiL2BrTpEntry 3 } + + +-- +-- The Forwarding Database for Transparent Bridges +-- + +atiL2BrTpFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2BrTpFdbEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table that contains information about unicast + entries for which the bridge has forwarding and/or + filtering information. This information is used + by the transparent bridging function in + determining how to propagate a received frame." + ::= { atiL2BrTp 3 } + + +atiL2BrTpFdbEntry OBJECT-TYPE + SYNTAX AtiL2BrTpFdbEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Information about a specific unicast MAC address + for which the bridge has some forwarding and/or + filtering information." + INDEX { atiL2BrTpFdbLanId, atiL2BrTpFdbAddress } + ::= { atiL2BrTpFdbTable 1 } + + +AtiL2BrTpFdbEntry ::= + SEQUENCE { + atiL2BrTpFdbLanId + INTEGER, + atiL2BrTpFdbAddress + MacAddress, + atiL2BrTpFdbPort + INTEGER, + atiL2BrTpFdbStatus + INTEGER + } + + +atiL2BrTpFdbLanId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object uniquely identifies the lan or + Virtual lan." + ::= { atiL2BrTpFdbEntry 1 } + + +atiL2BrTpFdbAddress OBJECT-TYPE + SYNTAX MacAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unicast MAC address for which the bridge has + forwarding and/or filtering information." + REFERENCE + "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" + ::= { atiL2BrTpFdbEntry 2 } + + +atiL2BrTpFdbPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Either the value '0', or the port number of the + port on which a frame having a source address + equal to the value of the corresponding instance + of atiL2BrTpFdbAddress has been seen. A value of + '0' indicates that the port number has not been + learned but that the bridge does have some + forwarding/filtering information about this + address . + Implementors are encouraged to assign the port + value to this object whenever it is learned even + for addresses for which the corresponding value of + atiL2BrTpFdbStatus is not learned(3)." + ::= { atiL2BrTpFdbEntry 3 } + + +atiL2BrTpFdbStatus OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + active (2), + other (3) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The status of this entry. + The meanings of the values are: + + inactive(1) : this entry is not longer valid + (e.g., it was learned but has since + aged-out), but has not yet been + flushed from the table. + + active(2) : the value of the corresponding + instance of atiL2BrTpFdbPort was + active, and is being used. + + other(3) : none of the following. This would + include the case where some other + MIB object (not the corresponding + instance of atiL2BrTpFdbPort ) is + being used to determine if and how + frames addressed to the value of + the corresponding instance of + atiL2BrTpFdbAddress are being + forwarded." + ::= { atiL2BrTpFdbEntry 4 } + +-- +-- Port Table for Transparent Bridges +-- + + +atiL2BrTpPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2BrTpPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table that contains information about every + port that is associated with this transparent + bridge." + ::= { atiL2BrTp 4 } + + +atiL2BrTpPortEntry OBJECT-TYPE + SYNTAX AtiL2BrTpPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of information for each port of a + transparent bridge." + INDEX { atiL2BrTpPortLanId, atiL2BrTpPort } + ::= { atiL2BrTpPortTable 1 } + + +AtiL2BrTpPortEntry ::= + SEQUENCE { + atiL2BrTpPortLanId + INTEGER, + atiL2BrTpPort + INTEGER, + atiL2BrTpPortMaxInfo + INTEGER, + atiL2BrTpPortInFrames + Counter, + atiL2BrTpPortOutFrames + Counter, + atiL2BrTpPortInDiscards + Counter + } + + +atiL2BrTpPortLanId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This object uniquely identifies the lan or + Virtual lan." + ::= { atiL2BrTpPortEntry 1 } + + +atiL2BrTpPort OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The port number of the port for which this entry + contains Transparent bridging management + information." + ::= { atiL2BrTpPortEntry 2 } + + -- It would be nice if we could use ifMtu as the size of the + -- largest INFO field, but we can't because ifMtu is defined + -- to be the size that the (inter-)network layer can use which + -- can differ from the MAC layer (especially if several layers + -- of encapsulation are used). + + +atiL2BrTpPortMaxInfo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum size of the INFO (non-MAC) field that + this port will receive or transmit." + ::= { atiL2BrTpPortEntry 3 } + + +atiL2BrTpPortInFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames that have been received by + this port from its segment. Note that a frame + received on the interface corresponding to this + port is only counted by this object if and only if + it is for a protocol being processed by the local + bridging function, including bridge management + frames." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { atiL2BrTpPortEntry 4 } + + +atiL2BrTpPortOutFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames that have been transmitted + by this port to its segment. Note that a frame + transmitted on the interface corresponding to this + port is only counted by this object if and only if + it is for a protocol being processed by the local + bridging function, including bridge management + frames." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { atiL2BrTpPortEntry 5 } + + +atiL2BrTpPortInDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Count of valid frames received which were + discarded (i.e., filtered) by the Forwarding + Process." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { atiL2BrTpPortEntry 6 } + + +-- +-- Trap Attributes for the Fan, Power and temperature Monitoring. +-- + + +atiL2TrapAttrModuleId OBJECT-TYPE + SYNTAX INTEGER (1..8) + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This attribute is the Module Numver used when Traps pertinent + to Module is sent." + ::= { atiL2TrapAttrGroup 1 } + + +atiL2TrapAttrPortId OBJECT-TYPE + SYNTAX INTEGER (1..32) + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This attribute is the Port Number used when Traps pertinent to + Ports are sent." + ::= { atiL2TrapAttrGroup 2 } + + +-- +-- TRAP-TYPE topologyChange when STP topology changes. +-- + +newRoot TRAP-TYPE + ENTERPRISE alliedTelesyn + DESCRIPTION + "The newRoot trap indicates that the sending agent + has become the new root of the Spanning Tree; the + trap is sent by a bridge soon after its election + as the new root, e.g., upon expiration of the + Topology Change Timer immediately subsequent to + its election. Implementation of this trap is + optional." + ::= 101 + + +topologyChange TRAP-TYPE + ENTERPRISE alliedTelesyn + DESCRIPTION + "A topologyChange trap is sent by a bridge when + any of its configured ports transitions from the + Learning state to the Forwarding state, or from + the Forwarding state to the Blocking state. The + trap is not sent if a newRoot trap is sent for the + same transition. Implementation of this trap is + optional." + ::= 102 + + +atiL2FanStopTrap TRAP-TYPE + ENTERPRISE alliedTelesyn + VARIABLES {atiL2TrapAttrModuleId } + DESCRIPTION + " A Trap sent from the Module defined by the varable + above when a fan from that Module stops." + ::= 103 + + +atiL2TemperatureAbnormalTrap TRAP-TYPE + ENTERPRISE alliedTelesyn + VARIABLES {atiL2TrapAttrModuleId } + DESCRIPTION + " A Trap sent from the Module defined by the varable + above when temperature of the Module is abnormal." + ::= 104 + + +atiL2PowerSupplyOutage TRAP-TYPE + ENTERPRISE alliedTelesyn + VARIABLES {atiL2TrapAttrModuleId } + DESCRIPTION + " A Trap sent from the Module defined by the varable + above when one of the power supply goes down." + ::= 105 + + +atiL2IntruderAlert TRAP-TYPE + ENTERPRISE alliedTelesyn + VARIABLES {atiL2TrapAttrModuleId, atiL2TrapAttrPortId } + DESCRIPTION + " A Trap sent from the specified module and specified + port when an intruder has been detected." + ::= 106 + + +-- +-- atiL2QOSConfigGroup (applicable only to at-8326GB, at-9410GB and at-8350GB) +-- + +atiL2QOSStatus OBJECT-TYPE + SYNTAX INTEGER{ + enable(1), + disable(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "If the QOS status is enabled, then QOS packets will + be assigned to high or low priority queue. If it is + disabled, packets works normally.(Applicable only to + at-8326GB, at-9410GB and at-8350GB)" + ::= { atiL2QOSConfigGroup 1 } + + +atiL2TrafficMappingTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtiL2TrafficMappingEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "It contains the mapping of all traffic classes and + their priority assignments.(Applicable only to + at-8326GB, at-9410GB and at-8350GB)" + ::= { atiL2QOSConfigGroup 2 } + + +atiL2TrafficMappingEntry OBJECT-TYPE + SYNTAX AtiL2TrafficMappingEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry maps a traffic class to the priority queue + to be used for it's packets. (Applicable only to + at-8326GB, at-9410GB and at-8350GB)" + INDEX { atiL2TrafficClassIndex } + ::= { atiL2TrafficMappingTable 1 } + + +AtiL2TrafficMappingEntry ::= + SEQUENCE { + atiL2TrafficClassIndex + INTEGER, + atiL2PriorityQueue + INTEGER + } + + +atiL2TrafficClassIndex OBJECT-TYPE + SYNTAX INTEGER(0..7) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Index of the traffic class. It is obtained + from the packet format.(Applicable only to + at-8326GB, at-9410GB and at-8350GB)" + ::= { atiL2TrafficMappingEntry 1 } + + +atiL2PriorityQueue OBJECT-TYPE + SYNTAX INTEGER{ + highest(0), + lowest(1) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The priority queue to be used to forward packets. + (Applicable only to at-8326GB, at-9410GB and + at-8350GB)" + ::= { atiL2TrafficMappingEntry 2 } + +END |