summaryrefslogtreecommitdiff
path: root/MIBS/arris/d5/ARRIS-D5-SOFTWARE-MGR-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/arris/d5/ARRIS-D5-SOFTWARE-MGR-MIB')
-rw-r--r--MIBS/arris/d5/ARRIS-D5-SOFTWARE-MGR-MIB530
1 files changed, 530 insertions, 0 deletions
diff --git a/MIBS/arris/d5/ARRIS-D5-SOFTWARE-MGR-MIB b/MIBS/arris/d5/ARRIS-D5-SOFTWARE-MGR-MIB
new file mode 100644
index 0000000..dd0ca4c
--- /dev/null
+++ b/MIBS/arris/d5/ARRIS-D5-SOFTWARE-MGR-MIB
@@ -0,0 +1,530 @@
+ARRIS-D5-SOFTWARE-MGR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ enterprises, MODULE-IDENTITY, OBJECT-TYPE,
+ Unsigned32, Integer32, NOTIFICATION-TYPE
+ FROM SNMPv2-SMI
+ OBJECT-GROUP, MODULE-COMPLIANCE
+ FROM SNMPv2-CONF
+ DateAndTime,
+ TruthValue
+ FROM SNMPv2-TC
+ arrisD5UEQam
+ FROM ARRIS-MIB;
+
+ softwareManagerMIB MODULE-IDENTITY
+ LAST-UPDATED "200804100000Z" -- 10 Apr 2008
+ ORGANIZATION "Arris Group"
+ CONTACT-INFO
+ " Software Development
+ Postal: ARRIS Group
+ 3871 Lakefield Drive
+ Suwanee, GA 30024
+ USA
+ Tel: 800-469-6569
+ Fax: 678-473-8770"
+
+ DESCRIPTION
+ "This MIB manages the software on the
+ ARRIS EdgeQAM products"
+ ::= { arrisD5UEQam 10 }
+
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- Control Group
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ smControlGroup OBJECT IDENTIFIER ::= { softwareManagerMIB 1 }
+
+ smReloadAction OBJECT-TYPE
+ SYNTAX INTEGER{
+ nil(1),
+ reloadConfigSave(2),
+ reloadNoConfigSave(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Force a reload of the ARRIS product. The command is applied to both WANs
+ when equipped. The load marked as boot in the Software Table will be loaded.
+
+ nil(1) - Do nothing
+ reloadConfigSave(2) - Saves the current configuration before reloading
+ reloadNoConfigSave(3) - Reloads without saving configuration"
+
+ ::= { smControlGroup 1 }
+
+ smConfigFileAction OBJECT-TYPE
+ SYNTAX INTEGER{
+ nil(1),
+ saveRunningConfig(2),
+ eraseStartupConfig(3),
+ uploadStartupConfigToServer(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Perform various actions on the configuration file, as directed
+ below.
+
+ nil(1) - Do nothing
+
+ saveRunningConfig(2) - Copies the running configuration to the
+ startup configuration.
+
+ eraseStartupConfig(3) - Erases the startup configuration. You
+ may want to do this before a reboot (without config file save)
+ to get a default configured system.
+
+ uploadStartupConfigToServer(4) - Using the server information
+ in the configFileTransfer group, this will upload the current
+ startup-configuration to the default directory on the server.
+ If you need upload directory control, use the
+ configFileTransfer"
+
+ ::= { smControlGroup 2 }
+
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- System Software Group
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ smSoftwareListGroup OBJECT IDENTIFIER ::= { softwareManagerMIB 2 }
+
+ smSoftwareListTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmSoftwareListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table of images installed on the flash disk"
+ ::= { smSoftwareListGroup 1 }
+
+ smSoftwareListEntry OBJECT-TYPE
+ SYNTAX SmSoftwareListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "."
+ INDEX { smSoftwareEntryIndex }
+ ::= { smSoftwareListTable 1 }
+
+ SmSoftwareListEntry ::= SEQUENCE {
+ smSoftwareEntryIndex Unsigned32,
+ smSoftwareEntryFilename OCTET STRING,
+ smSoftwareEntryVersion OCTET STRING,
+ smSoftwareEntryDate DateAndTime,
+ smSoftwareEntryState INTEGER,
+ smSoftwareEntrySize Integer32,
+ smSoftwareEntryStatus INTEGER,
+ smSoftwareEntryAction INTEGER }
+
+ smSoftwareEntryIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..30)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "image index"
+ ::= { smSoftwareListEntry 1 }
+
+ smSoftwareEntryFilename OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the image file"
+ ::= { smSoftwareListEntry 2 }
+
+ smSoftwareEntryVersion OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..32))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "image version"
+ ::= { smSoftwareListEntry 3 }
+
+ smSoftwareEntryDate OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Date image created"
+ ::= { smSoftwareListEntry 4 }
+
+ smSoftwareEntryState OBJECT-TYPE
+ SYNTAX INTEGER { valid(1), corrupt(2), unknown(3) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "State of the load file.
+
+ valid means the software load has been properly downloaded
+ and can be loaded onto the system.
+
+ corrupt means there was a problem tranferring the load and
+ it cannot be loaded onto the system.
+
+ unknown means that the software load has not yet been validated
+ by the system, and may or may not be valid."
+ ::= { smSoftwareListEntry 5 }
+
+ smSoftwareEntrySize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "file size"
+ ::= { smSoftwareListEntry 6 }
+
+ smSoftwareEntryStatus OBJECT-TYPE
+ SYNTAX INTEGER { running-boot(1), running(2), boot(3), inactive(4) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Status of software may be running-boot, running, boot or inactive
+
+ running-boot(1) indicates that the load is running AND is the boot load.
+
+ running(2) means the software is currently running on the box, but
+ is not the boot load.
+
+ boot(3) means that the selected load will boot on next restart.
+ Confirm by checking ksSMBootFileName.
+
+ inactive(4) indicates the load is neither running nor set to boot."
+ ::= { smSoftwareListEntry 7 }
+
+ smSoftwareEntryAction OBJECT-TYPE
+ SYNTAX INTEGER { nil(1), makeBoot(2), upload(3), delete(4) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Perform an action on this software load entry.
+
+ To make the current software load the boot load, select
+ makeBoot(2).
+
+ When set to upload(3), this software load will be sent
+ to the server using the settings specified in the
+ softwareDownloadGroup MIB objects.
+
+ This method cannot specify an upload path on the server
+ for the software load. The load will appear in the default
+ directory on the server for the specified transfer protocol.
+
+ For control over the upload path, please use the
+ smSoftwareDownloadGroup directly.
+
+ Selecting delete(4) will delete the load from the system."
+ ::= { smSoftwareListEntry 8 }
+
+
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- Config File Group
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ smConfigFileListGroup OBJECT IDENTIFIER ::= { softwareManagerMIB 3 }
+
+ smConfigFileListTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SmConfigFileListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table of configuration files or scripts on flash disk"
+ ::= { smConfigFileListGroup 1 }
+
+ smConfigFileListEntry OBJECT-TYPE
+ SYNTAX SmConfigFileListEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION "."
+ INDEX { smConfigFileEntryIndex }
+ ::= { smConfigFileListTable 1 }
+
+ SmConfigFileListEntry ::= SEQUENCE {
+ smConfigFileEntryIndex Unsigned32,
+ smConfigFileEntryName OCTET STRING,
+ smConfigFileTimestamp DateAndTime,
+ smConfigFileEntryAction INTEGER }
+
+ smConfigFileEntryIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..30)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "image index"
+ ::= { smConfigFileListEntry 1 }
+
+ smConfigFileEntryName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..256))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Name of the file"
+ ::= { smConfigFileListEntry 2 }
+
+ smConfigFileTimestamp OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Timestamp of the configuration file"
+ ::= { smConfigFileListEntry 3 }
+
+ smConfigFileEntryAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ nil(1),
+ makeStartupConfig(2),
+ copyIntoRunningConfig(3),
+ upload(4),
+ delete(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Actions to perform on the current configuration file.
+
+ To make this configuration file the startup configuration file,
+ select makeStartupConfig(2). Be sure not to overwrite the new
+ startup-configuration when reloading the system.
+
+ To copy the current configuration file into the running
+ configuration, select copyIntoRunningConfig(3). Don't forget
+ to save the new running configuration if necessary.
+
+ When set to upload(4), this software load will be sent
+ to the server using the settings specified in the
+ smConfigFileDownloadGroup MIB objects.
+
+ This method cannot specify an upload path on the server
+ for the software load. The load will appear in the default
+ directory on the server for the specified transfer protocol.
+
+ For control over the upload path, please use the
+ smConfigFileDownloadGroup directly.
+
+ Finally, to delete the configuration file, select delete(5)."
+ ::= { smConfigFileListEntry 4 }
+
+
+
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- Software Transfer Group
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ smSoftwareTransferGroup OBJECT IDENTIFIER ::= { softwareManagerMIB 4 }
+
+ smSoftwareTransferDevice OBJECT-TYPE
+ SYNTAX INTEGER {
+ nfs (1),
+ tftp (2),
+ ftp (3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specify protocol to use for software load transfers"
+ ::= { smSoftwareTransferGroup 1 }
+
+ smSoftwareTransferHostname OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Server ip address or hostname"
+ ::= { smSoftwareTransferGroup 2 }
+
+ smSoftwareTransferUsername OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Server user name"
+ ::= { smSoftwareTransferGroup 3 }
+
+ smSoftwareTransferPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Server user password"
+ ::= { smSoftwareTransferGroup 4 }
+
+ smSoftwareTransferPath OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Path and filename for image file on tftp, ftp or nfs"
+ ::= { smSoftwareTransferGroup 5 }
+
+ smSoftwareTransferControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ abort(1),
+ download(2),
+ upload(3),
+ downloadAsBoot(4)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Control the transfer as follows:
+
+ abort(1) - Will abort the transfer in progress.
+ download(2) - Starts a transfer to the ARRIS device
+ upload(3) - Transfer specified load to the server
+ downloadAsBoot(4) will download the software image to the
+ ARRIS device and make it the next boot image"
+
+ ::= { smSoftwareTransferGroup 6 }
+
+ smSoftwareTransferStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ inprogress(2),
+ finished(3),
+ filenameError(4),
+ hostnameError(5),
+ tooManyImages(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indication of the last transfer attempt as follows:
+
+ none(1) indicates no images have been transferred since
+ the system rebooted.
+
+ inprogress(2) - Indicates there is an active transfer
+ occurring.
+
+ finished(3) - Indicates the transfer is complete.
+
+ filenameError(4) - Indicates there was a problem with either
+ the path and/or filename, or the wrong server was specified and
+ the file was not found.
+
+ hostnameError(5) - Indicates a problem where the hostname could
+ not be resolved, or an incorrectly formatted IP address was specified."
+
+ ::= { smSoftwareTransferGroup 7 }
+
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- Config File Transfer
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+
+ smConfigFileTransferGroup OBJECT IDENTIFIER ::= { softwareManagerMIB 5 }
+
+ smConfigFileTransferDevice OBJECT-TYPE
+ SYNTAX INTEGER {
+ nfs (1),
+ tftp (2),
+ ftp (3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specify protocol to use for file transfers"
+ ::= { smConfigFileTransferGroup 1 }
+
+ smConfigFileTransferHostname OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Server ip address or hostname"
+ ::= { smConfigFileTransferGroup 2 }
+
+ smConfigFileTransferUsername OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Server user name"
+ ::= { smConfigFileTransferGroup 3 }
+
+ smConfigFileTransferPassword OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Server user password"
+ ::= { smConfigFileTransferGroup 4 }
+
+ smConfigFileTransferPath OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Path and filename of the configuration file
+ on the source device."
+ ::= { smConfigFileTransferGroup 5 }
+
+ smConfigFileTransferTargetPath OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..256))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Path and filename of the configuration file
+ on the target device."
+ ::= { smConfigFileTransferGroup 6 }
+
+ smConfigFileTransferControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ abort(1),
+ download(2),
+ upload(3),
+ downloadAsStartup(4),
+ downloadIntoRunning(5)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Control the transfer as follows:
+
+ abort(1) - Will abort the transfer in progress.
+ download(2) - Starts a transfer to the ARRIS device
+ upload(3) - Transfer specified file to the server
+ downloadAsStartup(4) Transfer the config file and make it the
+ startup configuration"
+
+ ::= { smConfigFileTransferGroup 7 }
+
+ smConfigFileTransferStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ inprogress(2),
+ finished(3),
+ filenameError(4),
+ hostnameError(5),
+ tooManyFiles(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indication of the last transfer attempt as follows:
+
+ none(1) indicates no files have been transferred since
+ the system rebooted.
+
+ inprogress(2) - Indicates there is an active transfer
+ occurring.
+
+ finished(3) - Indicates the transfer is complete.
+
+ filenameError(4) - Indicates there was a problem with either
+ the path and/or filename, or the wrong server was specified and
+ the file was not found.
+
+ hostnameError(5) - Indicates a problem where the hostname could
+ not be resolved, or an incorrectly formatted IP address was specified."
+
+ ::= { smConfigFileTransferGroup 8 }
+
+END
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 13:29:32 +0000