diff options
Diffstat (limited to 'MIBS/arubaos/WLSR-AP-MIB')
| -rw-r--r-- | MIBS/arubaos/WLSR-AP-MIB | 3511 |
1 files changed, 3511 insertions, 0 deletions
diff --git a/MIBS/arubaos/WLSR-AP-MIB b/MIBS/arubaos/WLSR-AP-MIB new file mode 100644 index 0000000..63ca2d8 --- /dev/null +++ b/MIBS/arubaos/WLSR-AP-MIB @@ -0,0 +1,3511 @@ +--- ArubaOS 8.8.0.1_80393 + WLSR-AP-MIB DEFINITIONS ::= BEGIN + + IMPORTS + TEXTUAL-CONVENTION FROM SNMPv2-TC + + MODULE-IDENTITY, + OBJECT-TYPE, + snmpModules, + Integer32, + Counter32, + IpAddress, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + + TDomain, + DisplayString, + PhysAddress, + TAddress, + TimeInterval, + RowStatus, + StorageType, + TestAndIncr, + MacAddress, + TruthValue + FROM SNMPv2-TC + + OBJECT-GROUP + FROM SNMPv2-CONF + wlsrEnterpriseMibModules + FROM ARUBA-MIB; + + wlsrMIB MODULE-IDENTITY + LAST-UPDATED "202008141745Z" + ORGANIZATION "Aruba, a Hewlett Packard Enterprise company" + CONTACT-INFO + "Postal: 3333 Scott Blvd, + Santa Clara, CA 95054 + E-mail: aruba-ext-eng-reg@hpe.com + Phone: 408 227 4500 + Fax: 408 752 0626" + DESCRIPTION + "This MIB is for managing the + Access Points and Air Monitors. + " + REVISION "202008141745Z" + DESCRIPTION + "The initial revision." + ::= { wlsrEnterpriseMibModules 1 } + + wlsrConfigGroup OBJECT IDENTIFIER ::= { wlsrMIB 1 } + wlsrStatsGroup OBJECT IDENTIFIER ::= { wlsrMIB 3 } + wlsrAirMonitorGroup OBJECT IDENTIFIER ::= { wlsrMIB 4 } + wlsrTrapsGroup OBJECT IDENTIFIER ::= { wlsrMIB 100 } + + -- wlsrConfigGroup contains objects to describe the Current AP + -- Configuration. + +-- wlsrConfigTable contains all the configuration data of an AP. +-- Each row in the table will represent a wifi interface. + + wlsrConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Table will list the configuration data of a wifi interface. + " + ::= { wlsrConfigGroup 1 } + + wlsrConfigEntry OBJECT-TYPE + SYNTAX WlsrConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + A Wifi configuration entry + " + INDEX { wlsrBSSID } + ::= { wlsrConfigTable 1 } + + WlsrConfigEntry ::= + SEQUENCE { + wlsrBSSID MacAddress, + wlsrESSID DisplayString, + wlsrMode INTEGER, + wlsrCurrentChannel INTEGER, + wlsrTxPower Integer32, + wlsrRTSThreshold INTEGER , + wlsrRetryLimit INTEGER , + wlsrPreamble INTEGER , + wlsrBeaconInterval INTEGER , + wlsrPowerMgmt INTEGER , + wlsrLoadBalance INTEGER , + wlsrSupportedRates BITS , + wlsrDTIMPeriod INTEGER , + wlsrLMSAddress IpAddress , + wlsrEncryption BITS , + wlsrStatus TruthValue , + wlsrAgeout Integer32 , + wlsrMTU INTEGER , + wlsrLocation DisplayString , + wlsrHideSSID TruthValue , + wlsrDenyBroadcast TruthValue, + wlsrBGmode INTEGER , + wlsrCardType INTEGER , + wlsrRegDomain Integer32 , + wlsrCountryCode DisplayString, + wlsrTxRates BITS + } + + wlsrBSSID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + BSSID of the WIFI Interface + " + ::= { wlsrConfigEntry 1 } + + wlsrESSID OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + ESSID of the WIFI Interface + " + ::= { wlsrConfigEntry 2 } + + wlsrMode OBJECT-TYPE + SYNTAX INTEGER { + master(1), + adhoc(2), + monitor(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Mode of the Access Point. Master indicates that we are + operating as Access Point. monitor indicates that the + AP is an Air Monitor. + " + ::= { wlsrConfigEntry 3 } + + wlsrCurrentChannel OBJECT-TYPE + SYNTAX INTEGER (1..165) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The current operating frequency channel of the DSSS PHY. + " + ::= { wlsrConfigEntry 4 } + + wlsrTxPower OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Transmit power of the Access point. The value is between 0 ... 4 + " + ::= { wlsrConfigEntry 5 } + + wlsrRTSThreshold OBJECT-TYPE + SYNTAX INTEGER (0..2347) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute shall indicate the number of octets in an MPDU, + below which an RTS/CTS handshake shall not be performed. + " + ::= { wlsrConfigEntry 6 } + + wlsrRetryLimit OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute shall indicate the maximum number of + transmission attempts of a frame, the length of which is less + than or equal to dot11RTSThreshold, that shall be made before a + failure condition is indicated. The default value of this + attribute shall be 7. + " + ::= { wlsrConfigEntry 7 } + + wlsrPreamble OBJECT-TYPE + SYNTAX INTEGER { + short(1), + long(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The current radio preamble type in use by the wifi interface. + " + ::= { wlsrConfigEntry 8 } + + wlsrBeaconInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This object shall specify the number of TU that a station shall + use for scheduling Beacon transmissions. This value is transmitted + in Beacon and Probe Response frames. + " + ::= { wlsrConfigEntry 9 } + + wlsrPowerMgmt OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates whether Power Management is enabled + or not. + " + ::= { wlsrConfigEntry 10 } + + wlsrLoadBalance OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates if load balancing is enabled or disabled. + " + ::= { wlsrConfigEntry 11 } + + + wlsrSupportedRates OBJECT-TYPE + SYNTAX BITS { + unused0(0), + unused1(1), + unused2(2), + unused3(3), + rate54Mbps(4), + rate48Mbps(5), + rate36Mbps(6), + rate24Mbps(7), + rate18Mbps(8), + rate12Mbps(9), + rate9Mbps(10), + rate6Mbps(11), + rate11Mbps(12), + rate5Mbps(13), + rate2Mbps(14), + rate1Mbps(15) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Basic Bit rates supported by this WIFI interface. + " + ::= { wlsrConfigEntry 12 } + + wlsrDTIMPeriod OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute shall specify the number of beacon + intervals that shall elapse between transmission of + Beacons frames containing a TIM element whose DTIM + Count field is 0. This value is transmitted in + the DTIM Period field of Beacon frames. + + " + ::= { wlsrConfigEntry 13 } + + + wlsrLMSAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the IP Address of the Local + switch that the AP is connected to. + " + ::= { wlsrConfigEntry 14 } + + wlsrEncryption OBJECT-TYPE + SYNTAX BITS{ + unused0(0), + unused1(1), + unused2(2), + unused3(3), + unused4(4), + unused5(5), + unused6(6), + xSec(7), + wpa2PreAuth(8), + aes8021x(9), + aesPSK(10), + dynamicTkip(11), + staticTkip(12), + dynamicWep(13), + staticWep(14), + disabled(15) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Encryption type of the WIFI interface. + " + ::= { wlsrConfigEntry 15 } + + wlsrStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the status of the WIFI Interface. + " + ::= { wlsrConfigEntry 17 } + + wlsrAgeout OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the ageout value in seconds. + " + ::= { wlsrConfigEntry 18 } + + wlsrMTU OBJECT-TYPE + SYNTAX INTEGER (0..2347) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the MTU of the WIFI Interface. + " + ::= { wlsrConfigEntry 19 } + + wlsrLocation OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Location of the Access Point in + Building.Floor.location format. + " + ::= { wlsrConfigEntry 20 } + + wlsrHideSSID OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates if SSID is hidden or not. + " + ::= { wlsrConfigEntry 21 } + + wlsrDenyBroadcast OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + A True value indicates that Broadcast is disabled. + " + ::= { wlsrConfigEntry 22 } + + wlsrBGmode OBJECT-TYPE + SYNTAX INTEGER{ + bgMixed(1), + bOnly(2), + gOnly(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attributes indicates the mode of the WIFI Interface + " + ::= { wlsrConfigEntry 23 } + + wlsrCardType OBJECT-TYPE + SYNTAX INTEGER { + noCard(1), + intersil(2), + atherosA(3), + atherosBG(4), + atherosABG(5), + ar5212A(10), + ar5212BG(11), + ar5212ABG(12) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Indicates the type of the radio card. + " + ::= { wlsrConfigEntry 24 } + + wlsrRegDomain OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + This Object represents the configured Regulatory Domain this AP + will adhere to. + 1 -- US + 2 -- JAPAN + 3 -- EU + 4 -- EU2 + 5 -- EU3 + 6 -- KOREA + 7 -- CHINA + 8 -- France + 9 -- Singapore + 10 -- MALAY + 11 -- BRAZIL + 12 -- Taiwan + 13 -- Czech Republic + 14 -- GR + 15 -- South Africa + 16 -- Argentina + 17 -- Australia + 18 -- Chile + " + ::= { wlsrConfigEntry 25 } + + wlsrCountryCode OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object represents the configured Country code . + " + ::= { wlsrConfigEntry 26 } + + wlsrTxRates OBJECT-TYPE + SYNTAX BITS { + unused0(0), + unused1(1), + unused2(2), + unused3(3), + rate54Mbps(4), + rate48Mbps(5), + rate36Mbps(6), + rate24Mbps(7), + rate18Mbps(8), + rate12Mbps(9), + rate9Mbps(10), + rate6Mbps(11), + rate11Mbps(12), + rate5Mbps(13), + rate2Mbps(14), + rate1Mbps(15) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Transmit Bit rates supported by this WIFI interface. + " + ::= { wlsrConfigEntry 27 } + +-- wlsrStatsGroup All the Statistics stored by the Access Point. + +-- Channel Statistics Group contains all the statistics related to +-- a channel. + +-- wlsrChannelStatsTable will contain all the Aggregate statistics collected +-- on a channel + + wlsrStatsChannelGroup OBJECT IDENTIFIER ::= { wlsrStatsGroup 3 } + + wlsrChannelStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrChannelStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Table contains the Channel Statistics. + " + + ::= { wlsrStatsChannelGroup 1 } + + wlsrChannelStatsEntry OBJECT-TYPE + SYNTAX WlsrChannelStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Channel Statistics Table" + INDEX { wlsrChStatsChannel} + ::= { wlsrChannelStatsTable 1 } + + WlsrChannelStatsEntry ::= + SEQUENCE { + wlsrChStatsChannel INTEGER , + wlsrChStatsNumAPs Integer32 , + wlsrChStatsNumStations Integer32 , + wlsrChStatsTotPkts Counter32 , + wlsrChStatsTotBytes Counter32 , + wlsrChStatsTotRetryPkts Counter32 , + wlsrChStatsTotFragmentedPkts Counter32 , + wlsrChStatsTotPhyErrPkts Counter32 , + wlsrChStatsTotMacErrPkts Counter32 , + wlsrChStatsFrameErrorRate Integer32 , + wlsrChStatsFrameRetryRate Integer32 , + wlsrChStatsFrameLowSpeedRate Integer32 , + wlsrChStatsFrameNonUnicastRate Integer32 , + wlsrChStatsFrameBandwidthRate Integer32 , + wlsrChStatsFrameFragmentationRate Integer32 , + wlsrChStatsMonitoredTime TimeTicks + + } + + wlsrChStatsChannel OBJECT-TYPE + SYNTAX INTEGER (1..165) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + The frequency Channel on which these statistics are collected. + " + ::= { wlsrChannelStatsEntry 1 } + + wlsrChStatsNumAPs OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of APs using this + channel. + " + ::= { wlsrChannelStatsEntry 2 } + + + wlsrChStatsNumStations OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of stations using this + channel. + " + ::= { wlsrChannelStatsEntry 3 } + + + wlsrChStatsTotPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total packets observed on this + channel. + " + ::= { wlsrChannelStatsEntry 4 } + + wlsrChStatsTotBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Bytes observed on this + channel. + " + ::= { wlsrChannelStatsEntry 5 } + + wlsrChStatsTotRetryPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Retry Packets observed on this + channel. + " + ::= { wlsrChannelStatsEntry 6 } + + wlsrChStatsTotFragmentedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Fragmented Packets observed on + this channel. + " + ::= { wlsrChannelStatsEntry 7 } + + wlsrChStatsTotPhyErrPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Physical Error Packets observed + on this channel. + " + ::= { wlsrChannelStatsEntry 8 } + + wlsrChStatsTotMacErrPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Mac errors packets observed on + this channel. + " + ::= { wlsrChannelStatsEntry 9 } + + wlsrChStatsFrameErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Frame errors as a percentage of total frames on this channel. + " + ::= { wlsrChannelStatsEntry 10 } + + wlsrChStatsFrameRetryRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The Frame Retry Rate + " + ::= { wlsrChannelStatsEntry 11 } + + wlsrChStatsFrameLowSpeedRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Frame Low speed error rate in kbps. + " + ::= { wlsrChannelStatsEntry 12 } + + wlsrChStatsFrameNonUnicastRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Frame non Unicast rate in kbps. + " + ::= { wlsrChannelStatsEntry 13 } + + wlsrChStatsFrameBandwidthRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Frame Bandwidth rate in kbps. + " + ::= { wlsrChannelStatsEntry 14 } + + wlsrChStatsFrameFragmentationRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Frame Fragmentation Rate in kbps. + " + ::= { wlsrChannelStatsEntry 15 } + + wlsrChStatsMonitoredTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Time in ticks, since we were observing this channel. + " + ::= { wlsrChannelStatsEntry 16 } + +-- This table breaks down the channel statistics observed into different +-- rate categories. + + wlsrChannelRateStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrChannelRateStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per channel Packet and Byte Counts + but represented in terms of rate categories. + " + + ::= { wlsrStatsChannelGroup 2 } + + wlsrChannelRateStatsEntry OBJECT-TYPE + SYNTAX WlsrChannelRateStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Channel Rate Statistics." + INDEX { wlsrChStatsChannel} + ::= { wlsrChannelRateStatsTable 1 } + + WlsrChannelRateStatsEntry ::= + SEQUENCE { + wlsrChStatsTotPktsAt1Mbps Counter32 , + wlsrChStatsTotBytesAt1Mbps Counter32 , + wlsrChStatsTotPktsAt2Mbps Counter32 , + wlsrChStatsTotBytesAt2Mbps Counter32 , + wlsrChStatsTotPktsAt5Mbps Counter32 , + wlsrChStatsTotBytesAt5Mbps Counter32 , + wlsrChStatsTotPktsAt11Mbps Counter32 , + wlsrChStatsTotBytesAt11Mbps Counter32 , + wlsrChStatsTotPktsAt6Mbps Counter32 , + wlsrChStatsTotBytesAt6Mbps Counter32 , + wlsrChStatsTotPktsAt12Mbps Counter32 , + wlsrChStatsTotBytesAt12Mbps Counter32 , + wlsrChStatsTotPktsAt18Mbps Counter32 , + wlsrChStatsTotBytesAt18Mbps Counter32 , + wlsrChStatsTotPktsAt24Mbps Counter32 , + wlsrChStatsTotBytesAt24Mbps Counter32 , + wlsrChStatsTotPktsAt36Mbps Counter32 , + wlsrChStatsTotBytesAt36Mbps Counter32 , + wlsrChStatsTotPktsAt48Mbps Counter32 , + wlsrChStatsTotBytesAt48Mbps Counter32 , + wlsrChStatsTotPktsAt54Mbps Counter32 , + wlsrChStatsTotBytesAt54Mbps Counter32 + + } + + wlsrChStatsTotPktsAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 1Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 1 } + + wlsrChStatsTotBytesAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 1Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 2 } + + wlsrChStatsTotPktsAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 2Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 3 } + + wlsrChStatsTotBytesAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 2Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 4 } + + wlsrChStatsTotPktsAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 5Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 5 } + + wlsrChStatsTotBytesAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 5Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 6 } + + wlsrChStatsTotPktsAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 11Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 7 } + + wlsrChStatsTotBytesAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 11Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 8 } + + wlsrChStatsTotPktsAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 6Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 9 } + + wlsrChStatsTotBytesAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 6Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 10 } + + wlsrChStatsTotPktsAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 12Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 11 } + + wlsrChStatsTotBytesAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 12Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 12 } + + wlsrChStatsTotPktsAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 18Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 13 } + + wlsrChStatsTotBytesAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 18Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 14 } + + wlsrChStatsTotPktsAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 24Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 15 } + + wlsrChStatsTotBytesAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 24Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 16 } + + wlsrChStatsTotPktsAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 36Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 17 } + + wlsrChStatsTotBytesAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 36Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 18 } + + wlsrChStatsTotPktsAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 48Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 19 } + + wlsrChStatsTotBytesAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 48Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 20 } + + wlsrChStatsTotPktsAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets observed + on this channel at 54Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 21 } + + wlsrChStatsTotBytesAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Bytes observed + on this channel at 54Mbps rate. + " + ::= { wlsrChannelRateStatsEntry 22 } + +-- This table breaks down the channel statistics observed based on the +-- Destination Address Types. + + wlsrChannelDATypeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrChannelDATypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per channel Packet and Byte Counts + but broken down in terms of Destination Address Type. + " + ::= { wlsrStatsChannelGroup 3 } + + wlsrChannelDATypeStatsEntry OBJECT-TYPE + SYNTAX WlsrChannelDATypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Channel Statistics based on the Address Type." + INDEX { wlsrChStatsChannel} + ::= { wlsrChannelDATypeStatsTable 1 } + + WlsrChannelDATypeStatsEntry ::= + SEQUENCE { + wlsrChStatsTotDABroadcastPkts Counter32 , + wlsrChStatsTotDABroadcastBytes Counter32 , + wlsrChStatsTotDAMulticastPkts Counter32 , + wlsrChStatsTotDAMulticastBytes Counter32 , + wlsrChStatsTotDAUnicastPkts Counter32 , + wlsrChStatsTotDAUnicastBytes Counter32 + + } + + wlsrChStatsTotDABroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Broadcast packets + observed on this channel. + " + ::= { wlsrChannelDATypeStatsEntry 1 } + + wlsrChStatsTotDABroadcastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Broadcast Bytes + observed on this channel. + " + ::= { wlsrChannelDATypeStatsEntry 2 } + + wlsrChStatsTotDAMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Multicast packets + observed on this channel. + " + ::= { wlsrChannelDATypeStatsEntry 3 } + + wlsrChStatsTotDAMulticastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Multicast Bytes + observed on this channel. + " + ::= { wlsrChannelDATypeStatsEntry 4 } + + wlsrChStatsTotDAUnicastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Unicast packets + observed on this channel. + " + ::= { wlsrChannelDATypeStatsEntry 5 } + + wlsrChStatsTotDAUnicastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Unicast Bytes + observed on this channel. + " + ::= { wlsrChannelDATypeStatsEntry 6 } + +-- This table breaks down the channel statistics observed based on the +-- the Type of the Packet. + + wlsrChannelFrameTypeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrChannelFrameTypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per channel Packet and Byte Counts + but broken down into different Frame Types. + " + ::= { wlsrStatsChannelGroup 4 } + + wlsrChannelFrameTypeStatsEntry OBJECT-TYPE + SYNTAX WlsrChannelFrameTypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Channel Statistics based on Frame Type." + INDEX { wlsrChStatsChannel} + ::= { wlsrChannelFrameTypeStatsTable 1 } + + WlsrChannelFrameTypeStatsEntry ::= + SEQUENCE { + wlsrChStatsTotMgmtPkts Counter32 , + wlsrChStatsTotMgmtBytes Counter32 , + wlsrChStatsTotCtrlPkts Counter32 , + wlsrChStatsTotCtrlBytes Counter32 , + wlsrChStatsTotDataPkts Counter32 , + wlsrChStatsTotDataBytes Counter32 + + } + + wlsrChStatsTotMgmtPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Management packets + observed on this channel. + " + ::= { wlsrChannelFrameTypeStatsEntry 1 } + + wlsrChStatsTotMgmtBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Management Bytes + observed on this channel. + " + ::= { wlsrChannelFrameTypeStatsEntry 2 } + + wlsrChStatsTotCtrlPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Control packets + observed on this channel. + " + ::= { wlsrChannelFrameTypeStatsEntry 3 } + + wlsrChStatsTotCtrlBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Control Bytes + observed on this channel. + " + ::= { wlsrChannelFrameTypeStatsEntry 4 } + + wlsrChStatsTotDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Data packets + observed on this channel. + " + ::= { wlsrChannelFrameTypeStatsEntry 5 } + + wlsrChStatsTotDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of Data Bytes + observed on this channel. + " + ::= { wlsrChannelFrameTypeStatsEntry 6 } + +-- This table breaks down the channel statistics observed into packet size +-- buckets. + + wlsrChannelPktSizeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrChannelPktSizeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per channel Packet and Byte Counts + but broken down into different Packet Sizes. + " + ::= { wlsrStatsChannelGroup 5 } + + wlsrChannelPktSizeStatsEntry OBJECT-TYPE + SYNTAX WlsrChannelPktSizeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Channel Statistics based on the packet sizes." + INDEX { wlsrChStatsChannel} + ::= { wlsrChannelPktSizeStatsTable 1 } + + WlsrChannelPktSizeStatsEntry ::= + SEQUENCE { + wlsrChStatsPkts63Bytes Counter32 , + wlsrChStatsPkts64To127 Counter32 , + wlsrChStatsPkts128To255 Counter32 , + wlsrChStatsPkts256To511 Counter32 , + wlsrChStatsPkts512To1023 Counter32 , + wlsrChStatsPkts1024To1518 Counter32 + + } + + wlsrChStatsPkts63Bytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + less than 64 bytes long. + " + ::= { wlsrChannelPktSizeStatsEntry 1 } + + wlsrChStatsPkts64To127 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 64 and 127 bytes long. + " + ::= { wlsrChannelPktSizeStatsEntry 2 } + + wlsrChStatsPkts128To255 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 128 and 255 bytes long. + " + ::= { wlsrChannelPktSizeStatsEntry 3 } + + wlsrChStatsPkts256To511 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 256 and 511 bytes long. + " + ::= { wlsrChannelPktSizeStatsEntry 4 } + + wlsrChStatsPkts512To1023 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 512 and 1023 bytes long. + " + ::= { wlsrChannelPktSizeStatsEntry 5 } + + wlsrChStatsPkts1024To1518 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total number of packets that were + between 1024 and 1518 bytes long. + " + ::= { wlsrChannelPktSizeStatsEntry 6 } + + +-- Station Statistics Group contains all the statistics related to +-- a Station. + +-- wlsrStaStatsTable will contain all the Aggregate statistics collected +-- for a Station + + wlsrStatsStaGroup OBJECT IDENTIFIER ::= { wlsrStatsGroup 4 } + + wlsrStaStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrStaStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This Table contains all the Aggregate statistics collected for a + station. + " + ::= { wlsrStatsStaGroup 1 } + + wlsrStaStatsEntry OBJECT-TYPE + SYNTAX WlsrStaStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Station Statistics." + INDEX { wlsrStaAddress} + ::= { wlsrStaStatsTable 1 } + + WlsrStaStatsEntry ::= + SEQUENCE { + wlsrStaAddress MacAddress , + wlsrStaTxPkts Counter32 , + wlsrStaTxBytes Counter32 , + wlsrStaRxPkts Counter32 , + wlsrStaRxBytes Counter32 , + wlsrStaTxRetryPkts Counter32 , + wlsrStaRxRetryPkts Counter32 , + wlsrStaTxFragmentedPkts Counter32 , + wlsrStaRxFragmentedPkts Counter32 , + wlsrStaReceiveErrPkts Counter32 , + wlsrStaTxTotSignal Integer32 , + wlsrStaTxSignalPkts Counter32 , + wlsrStaTxCurSignal Integer32 , + wlsrStaTxHighSignal Integer32 , + wlsrStaRxTotNoise Counter32 , + wlsrStaRxNoisePkts Counter32 , + wlsrStaRxCurrentNoise Integer32 , + wlsrStaRxHighNoise Integer32 , + wlsrStaRxLowNoise Integer32 , + wlsrStaFrameRetryRate Integer32 , + wlsrStaFrameLowSpeedRate Integer32 , + wlsrStaFrameNonUnicastRate Integer32 , + wlsrStaFrameRetryErrorRate Integer32 , + wlsrStaFrameBandwidthRate Integer32 , + wlsrStaFrameFragmentationRate Integer32 , + wlsrStaFrameHighBandwidthRate Integer32 + + } + + wlsrStaAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Mac Address of the Station connected to this Access Point. + " + ::= { wlsrStaStatsEntry 1 } + + wlsrStaTxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total packets Transmitted to the + Station. + " + ::= { wlsrStaStatsEntry 2 } + + wlsrStaTxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Bytes Transmitted to the + Station. + " + ::= { wlsrStaStatsEntry 3 } + + wlsrStaRxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total packets Received from the + Station. + " + ::= { wlsrStaStatsEntry 4 } + + wlsrStaRxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Bytes Received from the + Station. + " + ::= { wlsrStaStatsEntry 5 } + + wlsrStaTxRetryPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Retry Packets transmitted by the + station + " + ::= { wlsrStaStatsEntry 6 } + + wlsrStaRxRetryPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Retry Packets received from the + station + " + ::= { wlsrStaStatsEntry 7 } + + wlsrStaTxFragmentedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Fragmented Packets transmitted by the + station. + " + ::= { wlsrStaStatsEntry 8 } + + wlsrStaRxFragmentedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Fragmented Packets Received from the + station. + " + ::= { wlsrStaStatsEntry 9 } + + wlsrStaReceiveErrPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Error Packets received from + this station. + " + ::= { wlsrStaStatsEntry 10 } + + wlsrStaTxTotSignal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The attribute indicates the total transmitted signal computed for + this station. + " + ::= { wlsrStaStatsEntry 11 } + + wlsrStaTxSignalPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total Signal Packets transmitted by + this station. + " + ::= { wlsrStaStatsEntry 12 } + + wlsrStaTxCurSignal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicate the stations current transmit signal + strength. + " + ::= { wlsrStaStatsEntry 13 } + + wlsrStaTxHighSignal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicate the stations high transmit signal + strength. + " + ::= { wlsrStaStatsEntry 14 } + + + wlsrStaRxTotNoise OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + Total Noise. + " + ::= { wlsrStaStatsEntry 15 } + + wlsrStaRxNoisePkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + Received Noise. + " + ::= { wlsrStaStatsEntry 16 } + + wlsrStaRxCurrentNoise OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + Current Noise. + " + ::= { wlsrStaStatsEntry 17 } + + wlsrStaRxHighNoise OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + High Noise + " + ::= { wlsrStaStatsEntry 18 } + + wlsrStaRxLowNoise OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + Low Noise + " + ::= { wlsrStaStatsEntry 19 } + + wlsrStaFrameRetryRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Station Frame Retry Rate in kbps. + " + ::= { wlsrStaStatsEntry 20 } + + wlsrStaFrameLowSpeedRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Station Frame Low speed error rate in kbps. + " + ::= { wlsrStaStatsEntry 21 } + + wlsrStaFrameNonUnicastRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Station Frame Non Unicast rate in kbps. + " + ::= { wlsrStaStatsEntry 22 } + + wlsrStaFrameRetryErrorRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Station Frame Retry Error Rate in kbps. + " + ::= { wlsrStaStatsEntry 23 } + + wlsrStaFrameBandwidthRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Station Frame Bandwidth rate in kbps. + " + ::= { wlsrStaStatsEntry 24 } + + wlsrStaFrameFragmentationRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Station Frame Fragmentation Rate in kbps. + " + ::= { wlsrStaStatsEntry 25 } + + wlsrStaFrameHighBandwidthRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Station Frame High Bandwidth Rate in kbps. + " + ::= { wlsrStaStatsEntry 26 } + +-- This table breaks down the Station statistics into different +-- rate categories. + + wlsrStaRateStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrStaRateStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per channel Packet and Byte Counts + but represented in terms of rate categories. + " + + ::= { wlsrStatsStaGroup 2 } + + wlsrStaRateStatsEntry OBJECT-TYPE + SYNTAX WlsrStaRateStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " Station Rate Stats Table" + INDEX { wlsrStaAddress} + ::= { wlsrStaRateStatsTable 1 } + + WlsrStaRateStatsEntry ::= + SEQUENCE { + wlsrStaTxPktsAt1Mbps Counter32 , + wlsrStaTxBytesAt1Mbps Counter32 , + wlsrStaTxPktsAt2Mbps Counter32 , + wlsrStaTxBytesAt2Mbps Counter32 , + wlsrStaTxPktsAt5Mbps Counter32 , + wlsrStaTxBytesAt5Mbps Counter32 , + wlsrStaTxPktsAt11Mbps Counter32 , + wlsrStaTxBytesAt11Mbps Counter32 , + wlsrStaTxPktsAt6Mbps Counter32 , + wlsrStaTxBytesAt6Mbps Counter32 , + wlsrStaTxPktsAt12Mbps Counter32 , + wlsrStaTxBytesAt12Mbps Counter32 , + wlsrStaTxPktsAt18Mbps Counter32 , + wlsrStaTxBytesAt18Mbps Counter32 , + wlsrStaTxPktsAt24Mbps Counter32 , + wlsrStaTxBytesAt24Mbps Counter32 , + wlsrStaTxPktsAt36Mbps Counter32 , + wlsrStaTxBytesAt36Mbps Counter32 , + wlsrStaTxPktsAt48Mbps Counter32 , + wlsrStaTxBytesAt48Mbps Counter32 , + wlsrStaTxPktsAt54Mbps Counter32 , + wlsrStaTxBytesAt54Mbps Counter32 , + wlsrStaRxPktsAt1Mbps Counter32 , + wlsrStaRxBytesAt1Mbps Counter32 , + wlsrStaRxPktsAt2Mbps Counter32 , + wlsrStaRxBytesAt2Mbps Counter32 , + wlsrStaRxPktsAt5Mbps Counter32 , + wlsrStaRxBytesAt5Mbps Counter32 , + wlsrStaRxPktsAt11Mbps Counter32 , + wlsrStaRxBytesAt11Mbps Counter32 , + wlsrStaRxPktsAt6Mbps Counter32 , + wlsrStaRxBytesAt6Mbps Counter32 , + wlsrStaRxPktsAt12Mbps Counter32 , + wlsrStaRxBytesAt12Mbps Counter32 , + wlsrStaRxPktsAt18Mbps Counter32 , + wlsrStaRxBytesAt18Mbps Counter32 , + wlsrStaRxPktsAt24Mbps Counter32 , + wlsrStaRxBytesAt24Mbps Counter32 , + wlsrStaRxPktsAt36Mbps Counter32 , + wlsrStaRxBytesAt36Mbps Counter32 , + wlsrStaRxPktsAt48Mbps Counter32 , + wlsrStaRxBytesAt48Mbps Counter32 , + wlsrStaRxPktsAt54Mbps Counter32 , + wlsrStaRxBytesAt54Mbps Counter32 + + + } + + wlsrStaTxPktsAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 1Mbps rate. + " + ::= { wlsrStaRateStatsEntry 1 } + + wlsrStaTxBytesAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 1Mbps rate. + " + ::= { wlsrStaRateStatsEntry 2 } + + wlsrStaTxPktsAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 2Mbps rate. + " + ::= { wlsrStaRateStatsEntry 3 } + + wlsrStaTxBytesAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 2Mbps rate. + " + ::= { wlsrStaRateStatsEntry 4 } + + wlsrStaTxPktsAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 5Mbps rate. + " + ::= { wlsrStaRateStatsEntry 5 } + + wlsrStaTxBytesAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 5Mbps rate. + " + ::= { wlsrStaRateStatsEntry 6 } + + wlsrStaTxPktsAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 11Mbps rate. + " + ::= { wlsrStaRateStatsEntry 7 } + + wlsrStaTxBytesAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 11Mbps rate. + " + ::= { wlsrStaRateStatsEntry 8 } + + wlsrStaTxPktsAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 6Mbps rate. + " + ::= { wlsrStaRateStatsEntry 9 } + + wlsrStaTxBytesAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 6Mbps rate. + " + ::= { wlsrStaRateStatsEntry 10 } + + wlsrStaTxPktsAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 12Mbps rate. + " + ::= { wlsrStaRateStatsEntry 11 } + + wlsrStaTxBytesAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 12Mbps rate. + " + ::= { wlsrStaRateStatsEntry 12 } + + wlsrStaTxPktsAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 18Mbps rate. + " + ::= { wlsrStaRateStatsEntry 13 } + + wlsrStaTxBytesAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 18Mbps rate. + " + ::= { wlsrStaRateStatsEntry 14 } + + wlsrStaTxPktsAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 24Mbps rate. + " + ::= { wlsrStaRateStatsEntry 15 } + + wlsrStaTxBytesAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 24Mbps rate. + " + ::= { wlsrStaRateStatsEntry 16 } + + wlsrStaTxPktsAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 36Mbps rate. + " + ::= { wlsrStaRateStatsEntry 17 } + + wlsrStaTxBytesAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 36Mbps rate. + " + ::= { wlsrStaRateStatsEntry 18 } + + wlsrStaTxPktsAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 48Mbps rate. + " + ::= { wlsrStaRateStatsEntry 19 } + + wlsrStaTxBytesAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 48Mbps rate. + " + ::= { wlsrStaRateStatsEntry 20 } + + wlsrStaTxPktsAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Transmitted by the + station at 54Mbps rate. + " + ::= { wlsrStaRateStatsEntry 21 } + + wlsrStaTxBytesAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Transmitted by the + station at 54Mbps rate. + " + ::= { wlsrStaRateStatsEntry 22 } + + wlsrStaRxPktsAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 1Mbps rate. + " + ::= { wlsrStaRateStatsEntry 23 } + + wlsrStaRxBytesAt1Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 1Mbps rate. + " + ::= { wlsrStaRateStatsEntry 24 } + + wlsrStaRxPktsAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 2Mbps rate. + " + ::= { wlsrStaRateStatsEntry 25 } + + wlsrStaRxBytesAt2Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 2Mbps rate. + " + ::= { wlsrStaRateStatsEntry 26 } + + wlsrStaRxPktsAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 5Mbps rate. + " + ::= { wlsrStaRateStatsEntry 27 } + + wlsrStaRxBytesAt5Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 5Mbps rate. + " + ::= { wlsrStaRateStatsEntry 28 } + + wlsrStaRxPktsAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 11Mbps rate. + " + ::= { wlsrStaRateStatsEntry 29 } + + wlsrStaRxBytesAt11Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 11Mbps rate. + " + ::= { wlsrStaRateStatsEntry 30 } + + wlsrStaRxPktsAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 6Mbps rate. + " + ::= { wlsrStaRateStatsEntry 31 } + + wlsrStaRxBytesAt6Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 6Mbps rate. + " + ::= { wlsrStaRateStatsEntry 32 } + + wlsrStaRxPktsAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 12Mbps rate. + " + ::= { wlsrStaRateStatsEntry 33 } + + wlsrStaRxBytesAt12Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 12Mbps rate. + " + ::= { wlsrStaRateStatsEntry 34 } + + wlsrStaRxPktsAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 18Mbps rate. + " + ::= { wlsrStaRateStatsEntry 35 } + + wlsrStaRxBytesAt18Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 18Mbps rate. + " + ::= { wlsrStaRateStatsEntry 36 } + + wlsrStaRxPktsAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 24Mbps rate. + " + ::= { wlsrStaRateStatsEntry 37 } + + wlsrStaRxBytesAt24Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 24Mbps rate. + " + ::= { wlsrStaRateStatsEntry 38 } + + wlsrStaRxPktsAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 36Mbps rate. + " + ::= { wlsrStaRateStatsEntry 39 } + + wlsrStaRxBytesAt36Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 36Mbps rate. + " + ::= { wlsrStaRateStatsEntry 40 } + + wlsrStaRxPktsAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 48Mbps rate. + " + ::= { wlsrStaRateStatsEntry 41 } + + wlsrStaRxBytesAt48Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 48Mbps rate. + " + ::= { wlsrStaRateStatsEntry 42 } + + wlsrStaRxPktsAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Packets Received by the + station at 54Mbps rate. + " + ::= { wlsrStaRateStatsEntry 43 } + + wlsrStaRxBytesAt54Mbps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Octets Received by the + station at 54Mbps rate. + " + ::= { wlsrStaRateStatsEntry 44 } + +-- This table breaks down the Station statistics based on the +-- Destination Address Types. + + wlsrStaDATypeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrStaDATypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per channel Packet and Byte Counts + but broken down in terms of Destination Address Type. + " + ::= { wlsrStatsStaGroup 3 } + + wlsrStaDATypeStatsEntry OBJECT-TYPE + SYNTAX WlsrStaDATypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Station Statistics based on the Destination Address Type." + INDEX { wlsrStaAddress} + ::= { wlsrStaDATypeStatsTable 1 } + + WlsrStaDATypeStatsEntry ::= + SEQUENCE { + wlsrStaTxDABroadcastPkts Counter32 , + wlsrStaTxDABroadcastBytes Counter32 , + wlsrStaTxDAMulticastPkts Counter32 , + wlsrStaTxDAMulticastBytes Counter32 , + wlsrStaTxDAUnicastPkts Counter32 , + wlsrStaTxDAUnicastBytes Counter32 + + } + + wlsrStaTxDABroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Broadcast packets + transmitted by this Station. + " + ::= { wlsrStaDATypeStatsEntry 1 } + + wlsrStaTxDABroadcastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Broadcast Bytes + transmitted by this Station. + " + ::= { wlsrStaDATypeStatsEntry 2 } + + wlsrStaTxDAMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Multicast packets + transmitted by this station. + " + ::= { wlsrStaDATypeStatsEntry 3 } + + wlsrStaTxDAMulticastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of Multicast Bytes + transmitted by this station. + " + ::= { wlsrStaDATypeStatsEntry 4 } + + wlsrStaTxDAUnicastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total of Unicast packets + transmitted by this station. + " + ::= { wlsrStaDATypeStatsEntry 5 } + + wlsrStaTxDAUnicastBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the total of Unicast Bytes + transmitted by this station. + " + ::= { wlsrStaDATypeStatsEntry 6 } + +-- This table breaks down the Station statistics based on the +-- the Type of the Packet. + + wlsrStaFrameTypeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrStaFrameTypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per channel Packet and Byte Counts + but broken down into different Frame Types. + " + ::= { wlsrStatsStaGroup 4 } + + wlsrStaFrameTypeStatsEntry OBJECT-TYPE + SYNTAX WlsrStaFrameTypeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Station Frame Type Stats Entry." + INDEX { wlsrStaAddress} + ::= { wlsrStaFrameTypeStatsTable 1 } + + WlsrStaFrameTypeStatsEntry ::= + SEQUENCE { + wlsrStaTxMgmtPkts Counter32 , + wlsrStaTxMgmtBytes Counter32 , + wlsrStaTxCtrlPkts Counter32 , + wlsrStaTxCtrlBytes Counter32 , + wlsrStaTxDataPkts Counter32 , + wlsrStaTxDataBytes Counter32 , + wlsrStaRxMgmtPkts Counter32 , + wlsrStaRxMgmtBytes Counter32 , + wlsrStaRxCtrlPkts Counter32 , + wlsrStaRxCtrlBytes Counter32 , + wlsrStaRxDataPkts Counter32 , + wlsrStaRxDataBytes Counter32 + + } + + wlsrStaTxMgmtPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Management packets + from a station. + " + ::= { wlsrStaFrameTypeStatsEntry 1 } + + wlsrStaTxMgmtBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Management Bytes + from a station + " + ::= { wlsrStaFrameTypeStatsEntry 2 } + + wlsrStaTxCtrlPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Control packets + from a station + " + ::= { wlsrStaFrameTypeStatsEntry 3 } + + wlsrStaTxCtrlBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Control Bytes + from a station + " + ::= { wlsrStaFrameTypeStatsEntry 4 } + + wlsrStaTxDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Data packets + from a station + " + ::= { wlsrStaFrameTypeStatsEntry 5 } + + wlsrStaTxDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the Transmitted Data Bytes + observed on this channel. + " + ::= { wlsrStaFrameTypeStatsEntry 6 } + + wlsrStaRxMgmtPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Management packets + at a station. + " + ::= { wlsrStaFrameTypeStatsEntry 7 } + + wlsrStaRxMgmtBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Management Bytes + at a station. + " + ::= { wlsrStaFrameTypeStatsEntry 8 } + + wlsrStaRxCtrlPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Control packets + at a station. + " + ::= { wlsrStaFrameTypeStatsEntry 9 } + + wlsrStaRxCtrlBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Control Bytes + at a station. + " + ::= { wlsrStaFrameTypeStatsEntry 10 } + + wlsrStaRxDataPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Data packets + at a station. + " + ::= { wlsrStaFrameTypeStatsEntry 11 } + + wlsrStaRxDataBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of received Data Bytes + at a station. + " + ::= { wlsrStaFrameTypeStatsEntry 12 } + +-- This table breaks down the Station statistics received or transmitted by a +-- station into packet size buckets. + + wlsrStaPktSizeStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrStaPktSizeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the per channel Packet and Byte Counts + but broken down into different Packet Sizes. + " + ::= { wlsrStatsStaGroup 5 } + + wlsrStaPktSizeStatsEntry OBJECT-TYPE + SYNTAX WlsrStaPktSizeStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Station Packet Size Stats." + INDEX { wlsrStaAddress} + ::= { wlsrStaPktSizeStatsTable 1 } + + WlsrStaPktSizeStatsEntry ::= + SEQUENCE { + wlsrStaTxPkts63Bytes Counter32 , + wlsrStaTxPkts64To127 Counter32 , + wlsrStaTxPkts128To255 Counter32 , + wlsrStaTxPkts256To511 Counter32 , + wlsrStaTxPkts512To1023 Counter32 , + wlsrStaTxPkts1024To1518 Counter32 , + wlsrStaRxPkts63Bytes Counter32 , + wlsrStaRxPkts64To127 Counter32 , + wlsrStaRxPkts128To255 Counter32 , + wlsrStaRxPkts256To511 Counter32 , + wlsrStaRxPkts512To1023 Counter32 , + wlsrStaRxPkts1024To1518 Counter32 + + } + + wlsrStaTxPkts63Bytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were less than 64 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 1 } + + wlsrStaTxPkts64To127 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 64 and 127 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 2 } + + wlsrStaTxPkts128To255 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 128 and 255 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 3 } + + wlsrStaTxPkts256To511 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 256 and 511 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 4 } + + wlsrStaTxPkts512To1023 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 512 and 1023 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 5 } + + wlsrStaTxPkts1024To1518 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets transmitted by the + station that were between 1024 and 1518 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 6 } + + wlsrStaRxPkts63Bytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were less than 64 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 7 } + + wlsrStaRxPkts64To127 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 64 and 127 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 8 } + + wlsrStaRxPkts128To255 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 128 and 255 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 9 } + + wlsrStaRxPkts256To511 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 256 and 511 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 10 } + + wlsrStaRxPkts512To1023 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 512 and 1023 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 11 } + + wlsrStaRxPkts1024To1518 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the number of packets Received by the + station that were between 1024 and 1518 bytes long. + " + ::= { wlsrStaPktSizeStatsEntry 12 } + +-- Air Monitor Access Point List Table. On an Air monitor this table lists all +-- the Access Points the AM is monitoring. On an Access Point, this table +-- contains itself. + + wlsrAirMonitorApListTable OBJECT-TYPE + SYNTAX SEQUENCE OF WlsrAirMonitorApListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table contains all the Access Points monitored by the AM. + " + ::= { wlsrAirMonitorGroup 1 } + + wlsrAirMonitorApListEntry OBJECT-TYPE + SYNTAX WlsrAirMonitorApListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Ap List Entry" + INDEX { wlsrAmApBSSID} + ::= { wlsrAirMonitorApListTable 1 } + + WlsrAirMonitorApListEntry ::= + SEQUENCE { + wlsrAmApBSSID MacAddress , + wlsrAmSSID DisplayString , + wlsrAmChannel INTEGER , + wlsrAmPhysicalType INTEGER , + wlsrAmAccessPointType INTEGER , + wlsrAmRAPType INTEGER, + wlsrAmRSSI Integer32, + wlsrAmMonitoredTime TimeTicks, + wlsrAmInactivityTime TimeTicks, + wlsrAmLoadBalancing INTEGER + + } + + wlsrAmApBSSID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + BSSID of the Access Point. + " + ::= { wlsrAirMonitorApListEntry 1 } + + wlsrAmSSID OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..62)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the SSID of the AP. + " + ::= { wlsrAirMonitorApListEntry 2 } + + wlsrAmChannel OBJECT-TYPE + SYNTAX INTEGER(1..165) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the channel on which this AP is + operating. + " + ::= { wlsrAirMonitorApListEntry 3 } + + wlsrAmPhysicalType OBJECT-TYPE + SYNTAX INTEGER{ + dot11b(1), + dot11a(2), + dot11g(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the physical layer type. + " + ::= { wlsrAirMonitorApListEntry 4 } + + + wlsrAmAccessPointType OBJECT-TYPE + SYNTAX INTEGER{ + genericAp(1), + softAp(2), + ciscoAp(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This attribute indicates the type of AP. + " + ::= { wlsrAirMonitorApListEntry 5 } + + wlsrAmRAPType OBJECT-TYPE + SYNTAX INTEGER{ + valid(1), + interfering(2), + unsecure(3), + dos(4), + unknown(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Type of the Access Point. + " + ::= { wlsrAirMonitorApListEntry 6 } + + wlsrAmRSSI OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Access point Receiver Signal Strength Indicator. + + " + ::= { wlsrAirMonitorApListEntry 7 } + + wlsrAmMonitoredTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Time in ticks, since the AM is observing this access point. + " + ::= { wlsrAirMonitorApListEntry 8 } + + wlsrAmInactivityTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Access point Inactivity Time. + + " + ::= { wlsrAirMonitorApListEntry 9 } + + wlsrAmLoadBalancing OBJECT-TYPE + SYNTAX INTEGER{ + enable(1), + disable(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The attributes indicates whether Load balancing is enabled + for this access point. + + " + ::= { wlsrAirMonitorApListEntry 10 } + +-- wlsrTrapsGroup +-- This group defines all the traps generated by the access points. + +-- Objects defined under this group does not have support for +-- GET or SET. They are defined in the MIB to pass specific +-- information. which has meaning only in the context of a trap. + +wlsrTrapObjectsGroup OBJECT IDENTIFIER ::= { wlsrTrapsGroup 100 } + +wlsrTargetApBSSID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the BSSID of the + Access Point, for which we are raising the trap. If an + Air Monitor is sending the trap then this will indicate + AP. If an Access Point is sending the trap, then it will point + to itself. + " +::= { wlsrTrapObjectsGroup 1 } + +wlsrTargetApSSID OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the SSID of the + Access Point, for which we are raising the trap. If an + Air Monitor is sending the trap then this will indicate + AP. If an Access Point is sending the trap, then it will point + to itself. + " +::= { wlsrTrapObjectsGroup 2 } + +wlsrTargetApChannel OBJECT-TYPE + SYNTAX INTEGER(1..165) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the Channel of the + Access Point, for which we are raising the trap. If an + Air Monitor is sending the trap then this will indicate + AP. If an Access Point is sending the trap, then it will point + to itself. + " +::= { wlsrTrapObjectsGroup 3 } + +wlsrSourceMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the MAC + address of the Source. + " +::= { wlsrTrapObjectsGroup 4 } + +wlsrNodeMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the MAC + address of a Node. + " +::= { wlsrTrapObjectsGroup 5 } + +wlsrFrameType OBJECT-TYPE + SYNTAX INTEGER{ + associateRequest(1), + associateResponse(2), + reassociateRequest(3), + reassociateResponse(4), + probeRequest(5), + probeResponse(6), + beacon(9), + atim(10), + disassociate(11), + auth(12), + deauth(13) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the + Frame Type. + " +::= { wlsrTrapObjectsGroup 6 } + +wlsrAddressType OBJECT-TYPE + SYNTAX INTEGER{ + srcAddress(1), + dstAddress(2), + bssid(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the + Address Type. + " +::= { wlsrTrapObjectsGroup 7 } + +wlsrSignatureName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the + Signature Name. + " +::= { wlsrTrapObjectsGroup 8 } + +wlsrMatchedMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the + Macaddress. + " +::= { wlsrTrapObjectsGroup 9 } + +wlsrMatchedIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the + Ip Address. + " +::= { wlsrTrapObjectsGroup 10 } + +wlsrReceiverMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the MAC + address of the Receiver. + " +::= { wlsrTrapObjectsGroup 11 } + +wlsrTransmitterMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the MAC + address of the Transmitter. + " +::= { wlsrTrapObjectsGroup 12 } + +wlsrRSSI OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used in the traps to indicate the + Signal Strength Indicator. + " +::= { wlsrTrapObjectsGroup 13 } + +wlsrRogueInfoURL OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..256)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used to point to the WEBGUI Rogue AP information + URL. + " +::= { wlsrTrapObjectsGroup 14 } + +wlsrInterferingAPInfoURL OBJECT-TYPE + SYNTAX DisplayString(SIZE(0..256)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + This Object is used to point to the WEBGUI Rogue interfering + AP information URL. + " +::= { wlsrTrapObjectsGroup 15 } + + +wlsrUnsecureApDetected NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel, wlsrMatchedMac, + wlsrMatchedIp, wlsrRogueInfoURL} + STATUS current + DESCRIPTION + " + This trap indicates that an Unsecure Access Point is detected + by an Air Monitor located at wlsrLocation on channel + wlsrCurrentChannel. The AP is declared unsecure, because we + matched it to the wlsrMatchedMac/wlsrMatchedIp. + + " + ::= { wlsrTrapsGroup 1001 } + +wlsrStaImpersonation NOTIFICATION-TYPE + OBJECTS {wlsrNodeMac, wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AM at location wlsrLocation detected + a Station impersonation. + " + ::= { wlsrTrapsGroup 1002 } +wlsrReservedChannelViolation NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an Access Point is detected + by an AP at location wlsrLocation, which + violates the Reserved Channel configuration. + " + ::= { wlsrTrapsGroup 1003 } + + +wlsrValidSSIDViolation NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an Access Point violating Valid SSID is + detected by an AP at wlsrLocation. + " + ::= { wlsrTrapsGroup 1004 } + +wlsrChannelMisconfiguration NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an Access Point has a bad channel + configuration. + " + ::= { wlsrTrapsGroup 1005 } + + +wlsrOUIMisconfiguration NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an Access Point has bad OUI + configuration. + " + ::= { wlsrTrapsGroup 1006 } + + +wlsrSSIDMisconfiguration NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an Access Point has bad SSID + configuration. + " + ::= { wlsrTrapsGroup 1007 } + +wlsrShortPreableMisconfiguration NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an Access Point has bad Short preamble + configuration. + " + ::= { wlsrTrapsGroup 1008 } + + +wlsrWPAMisconfiguration NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an Access Point has bad WPA + configuration. + " + ::= { wlsrTrapsGroup 1009 } + + +wlsrAdhocNetworkDetected NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM has detected an Adhoc + network. + " + ::= { wlsrTrapsGroup 1010 } + + +wlsrStaPolicyViolation NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrNodeMac, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that a Valid Station policy is violated. + " + ::= { wlsrTrapsGroup 1011 } + + +wlsrRepeatWEPIVViolation NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM detected a Repeat WEP-IV violation. + " + ::= { wlsrTrapsGroup 1012 } + +wlsrWeakWEPIVViolation NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM detected a Weak WEP-IV violation. + " + ::= { wlsrTrapsGroup 1013 } + +wlsrChannelInterferenceDetected NOTIFICATION-TYPE + OBJECTS {wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation has detected a channel interference on + wlsrCurrentChannel. + " + ::= { wlsrTrapsGroup 1014 } + +wlsrAPInterferenceDetected NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation has detected an AP interference on + wlsrCurrentChannel. + " + ::= { wlsrTrapsGroup 1015 } + +wlsrStaInterferenceDetected NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation has detected a Station interference on + wlsrCurrentChannel. + " + ::= { wlsrTrapsGroup 1016 } + +wlsrFrameRetryRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded + an upper threshold for Frame Retry Rate for AP wlsrTargetApBSSID. + " + ::= { wlsrTrapsGroup 1017 } + +wlsrFrameReceiveErrorRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrTargetApChannel, wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded + an upper threshold for Frame Receive Error Rate for AP + wlsrTargetApBSSID. + " + ::= { wlsrTrapsGroup 1018 } + +wlsrFrameFragmentationRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrTargetApChannel, wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded + an upper threshold for Frame Fragmentation Rate for AP + wlsrTargetApBSSID. + " + ::= { wlsrTrapsGroup 1019 } + +wlsrFrameBandWidthRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that a station wlsrStaAddress has exceeded + the allocated Bandwidth rate. + " + ::= { wlsrTrapsGroup 1020 } + + +wlsrFrameLowSpeedRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that a station wlsrStaAddress has exceeded + the Low speed rate. + " + ::= { wlsrTrapsGroup 1021 } + +wlsrFrameNonUnicastRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that a station wlsrStaAddress has exceeded + the Non Unicast traffic rate. + " + ::= { wlsrTrapsGroup 1022 } + +wlsrLoadbalancingEnabled NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID + has enabled Load balancing. + " + ::= { wlsrTrapsGroup 1023 } + +wlsrChannelFrameRetryRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that it exceeded an upper threshold + for Frame Retry Rate. + " + ::= { wlsrTrapsGroup 1024 } + +wlsrChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that it exceeded an upper threshold + for Frame Fragmentation Rate. + " + ::= { wlsrTrapsGroup 1025 } + + +wlsrChannelFrameErrorRateExceeded NOTIFICATION-TYPE + OBJECTS {wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that it exceeded an upper threshold + for Frame Error Rate. + " + ::= { wlsrTrapsGroup 1026 } + +wlsrSignatureMatch NOTIFICATION-TYPE + OBJECTS {wlsrSignatureName, wlsrSourceMac,wlsrRSSI, + wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that we detected a signature match. + " + ::= { wlsrTrapsGroup 1027 } + +wlsrChannelRateAnomaly NOTIFICATION-TYPE + OBJECTS {wlsrFrameType, wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM at wlsrLocation detected + frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the + configured IDS rate threshold. + " + ::= { wlsrTrapsGroup 1028 } + +wlsrNodeRateAnomaly NOTIFICATION-TYPE + OBJECTS {wlsrFrameType, wlsrNodeMac, wlsrRSSI, + wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM at wlsrLocation detected + frames of type wlsrFrameType transmitted by node wlsrNodeMac + which exceeds the configured IDS rate threshold. + " + ::= { wlsrTrapsGroup 1029 } + +wlsrEAPRateAnomaly NOTIFICATION-TYPE + OBJECTS {wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that the number of EAP Handshake packets received + by an AP/AM at wlsrLocation exceeds the configured IDS EAP Handshake + rate. + " + ::= { wlsrTrapsGroup 1030 } + +wlsrSignalAnomaly NOTIFICATION-TYPE + OBJECTS {wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM at wlsrLocation detected a Signal + Anomaly on wlsrCurrentChannel. + " + ::= { wlsrTrapsGroup 1031 } + +wlsrSequenceNumberAnomaly NOTIFICATION-TYPE + OBJECTS {wlsrSourceMac, wlsrRSSI, wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM at wlsrLocation received packets + which exceeds the acceptable sequence number difference. The acceptable + sequence number difference is an IDS Configuration object. + " + ::= { wlsrTrapsGroup 1032 } + +wlsrDisconnectStationAttack NOTIFICATION-TYPE + OBJECTS {wlsrFrameType, wlsrSourceMac, wlsrRSSI, wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM detected a station Disconnect attack. + " + ::= { wlsrTrapsGroup 1033 } + +wlsrApFloodAttack NOTIFICATION-TYPE + OBJECTS {wlsrLocation} + STATUS current + DESCRIPTION + " + This trap is triggered when the number of spurious AP's detected by + an AP/AM at wlsrLocation exceeds the configured IDS threshold. + " + ::= { wlsrTrapsGroup 1034 } + +wlsrAdhocNetwork NOTIFICATION-TYPE + OBJECTS {wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrRSSI, + wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM at wlsrLocation detected an Adhoc + Network. Node wlsrSourceMac is connected to an adhoc AP + wlsrTargetApBSSID with wlsrTargetApSSID ssid. + " + ::= { wlsrTrapsGroup 1035 } + +wlsrWirelessBridge NOTIFICATION-TYPE + OBJECTS {wlsrTransmitterMac, wlsrReceiverMac, wlsrRSSI, + wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM at wlsrLocation detected a Wireless + Bridge. The detected bridge is between wlsrSourceMac and + wlsrReceiverMac. + " + ::= { wlsrTrapsGroup 1036 } + +wlsrInvalidMacOUI NOTIFICATION-TYPE + OBJECTS {wlsrAddressType, wlsrNodeMac,wlsrRSSI, + wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM at wlsrLocation detected an Invalid + MAC OUI in transmission from the Node wlsrNodeMac. The invalid mac is + the <wlsrAddressType>. + " + ::= { wlsrTrapsGroup 1037 } + +wlsrLoadbalancingDisabled NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrTargetApChannel, wlsrLocation} + STATUS current + DESCRIPTION + " + This trap indicates that an AM/AP located at + wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID + has disabled Load balancing. + " + ::= { wlsrTrapsGroup 1038 } + +wlsrWEPMisconfiguration NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an Access Point has bad WEP + configuration. + " + ::= { wlsrTrapsGroup 1039 } + + +wlsrStaRepeatWEPIVViolation NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM detected a Repeat WEP-IV violation. + for a Station + " + ::= { wlsrTrapsGroup 1040 } + +wlsrStaWeakWEPIVViolation NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AP/AM detected a Weak WEP-IV violation. + for a Station + " + ::= { wlsrTrapsGroup 1041 } + +wlsrStaAssociatedToUnsecureAp NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel, wlsrNodeMac, wlsrRogueInfoURL} + STATUS current + DESCRIPTION + " + This trap indicates that a station with wlsrNodeMac associated + with an Unsecure Access Point wlsrTargetApBSSID. This is detected + by an Air Monitor located at wlsrLocation on channel + wlsrCurrentChannel. + + " + ::= { wlsrTrapsGroup 1042 } + +wlsrAdhocNetworkBridgeDetected NOTIFICATION-TYPE + OBJECTS {wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel} + STATUS current + DESCRIPTION + " + This trap indicates that an AM has detected an Adhoc + network that is bridging to a wired network + " + ::= { wlsrTrapsGroup 1043 } + +wlsrInterferingApDetected NOTIFICATION-TYPE + OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, + wlsrLocation, wlsrCurrentChannel, wlsrInterferingAPInfoURL} + STATUS current + DESCRIPTION + " + This trap indicates that an Interfering Access Point is detected + by an Air Monitor located at wlsrLocation on channel + wlsrCurrentChannel. + + " + ::= { wlsrTrapsGroup 1044 } + +END + + |