diff options
Diffstat (limited to 'MIBS/avtech/ROOMALERT32E-MIB')
| -rw-r--r-- | MIBS/avtech/ROOMALERT32E-MIB | 2278 |
1 files changed, 2278 insertions, 0 deletions
diff --git a/MIBS/avtech/ROOMALERT32E-MIB b/MIBS/avtech/ROOMALERT32E-MIB new file mode 100644 index 0000000..3dea310 --- /dev/null +++ b/MIBS/avtech/ROOMALERT32E-MIB @@ -0,0 +1,2278 @@ +-- +--defines ROOMALERT32E-MIB for SNMP agent extension of Room Alert 32E +--Contents: Global Registration Module +-- Room Alert OIDs - Enterprise 20916 +--Version: 3.1.0 +--Date: 13 September 2017 +--Developed By: AVTECH Software, Inc. + +-- +--Copyright (c) 2017 AVTECH Software, Inc. +-- + +ROOMALERT32E-MIB DEFINITIONS ::= BEGIN + + +IMPORTS + enterprises, IpAddress, Counter, TimeTicks + FROM RFC1155-SMI + OBJECT-TYPE + FROM RFC-1212 + TRAP-TYPE + FROM RFC-1215; + + +avtech OBJECT IDENTIFIER ::= { enterprises 20916 } +products OBJECT IDENTIFIER ::= { avtech 1 } +roomalert32E OBJECT IDENTIFIER ::= { products 8 } +sensors OBJECT IDENTIFIER ::= { roomalert32E 1 } +internal OBJECT IDENTIFIER ::= { sensors 1 } +temperature OBJECT IDENTIFIER ::= { internal 1 } +humidity OBJECT IDENTIFIER ::= { internal 2 } +power OBJECT IDENTIFIER ::= { internal 3 } +heat-index OBJECT IDENTIFIER ::= { internal 4 } +analog OBJECT IDENTIFIER ::= { internal 5 } +relay OBJECT IDENTIFIER ::= { internal 6 } +digital OBJECT IDENTIFIER ::= { sensors 2 } +digital-sen1 OBJECT IDENTIFIER ::= { digital 1 } +digital-sen2 OBJECT IDENTIFIER ::= { digital 2 } +digital-sen3 OBJECT IDENTIFIER ::= { digital 3 } +digital-sen4 OBJECT IDENTIFIER ::= { digital 4 } +digital-sen5 OBJECT IDENTIFIER ::= { digital 5 } +digital-sen6 OBJECT IDENTIFIER ::= { digital 6 } +digital-sen7 OBJECT IDENTIFIER ::= { digital 7 } +digital-sen8 OBJECT IDENTIFIER ::= { digital 8 } +switch OBJECT IDENTIFIER ::= { sensors 3 } +wireless OBJECT IDENTIFIER ::= { sensors 4 } +wish-1 OBJECT IDENTIFIER ::= { wireless 1 } +wish-1-sensors OBJECT IDENTIFIER ::= { wish-1 4 } +wish-1-internal OBJECT IDENTIFIER ::= { wish-1-sensors 1 } +wish-1-external OBJECT IDENTIFIER ::= { wish-1-sensors 2 } +wish-1-external-1 OBJECT IDENTIFIER ::= { wish-1-external 1 } +wish-1-external-2 OBJECT IDENTIFIER ::= { wish-1-external 2 } +wish-2 OBJECT IDENTIFIER ::= { wireless 2 } +wish-2-sensors OBJECT IDENTIFIER ::= { wish-2 4 } +wish-2-internal OBJECT IDENTIFIER ::= { wish-2-sensors 1 } +wish-2-external OBJECT IDENTIFIER ::= { wish-2-sensors 2 } +wish-2-external-1 OBJECT IDENTIFIER ::= { wish-2-external 1 } +wish-2-external-2 OBJECT IDENTIFIER ::= { wish-2-external 2 } +wish-3 OBJECT IDENTIFIER ::= { wireless 3 } +wish-3-sensors OBJECT IDENTIFIER ::= { wish-3 4 } +wish-3-internal OBJECT IDENTIFIER ::= { wish-3-sensors 1 } +wish-3-external OBJECT IDENTIFIER ::= { wish-3-sensors 2 } +wish-3-external-1 OBJECT IDENTIFIER ::= { wish-3-external 1 } +wish-3-external-2 OBJECT IDENTIFIER ::= { wish-3-external 2 } +wish-4 OBJECT IDENTIFIER ::= { wireless 4 } +wish-4-sensors OBJECT IDENTIFIER ::= { wish-4 4 } +wish-4-internal OBJECT IDENTIFIER ::= { wish-4-sensors 1 } +wish-4-external OBJECT IDENTIFIER ::= { wish-4-sensors 2 } +wish-4-external-1 OBJECT IDENTIFIER ::= { wish-4-external 1 } +wish-4-external-2 OBJECT IDENTIFIER ::= { wish-4-external 2 } +wish-5 OBJECT IDENTIFIER ::= { wireless 5 } +wish-5-sensors OBJECT IDENTIFIER ::= { wish-5 4 } +wish-5-internal OBJECT IDENTIFIER ::= { wish-5-sensors 1 } +wish-5-external OBJECT IDENTIFIER ::= { wish-5-sensors 2 } +wish-5-external-1 OBJECT IDENTIFIER ::= { wish-5-external 1 } +wish-5-external-2 OBJECT IDENTIFIER ::= { wish-5-external 2 } +wish-6 OBJECT IDENTIFIER ::= { wireless 6 } +wish-6-sensors OBJECT IDENTIFIER ::= { wish-6 4 } +wish-6-internal OBJECT IDENTIFIER ::= { wish-6-sensors 1 } +wish-6-external OBJECT IDENTIFIER ::= { wish-6-sensors 2 } +wish-6-external-1 OBJECT IDENTIFIER ::= { wish-6-external 1 } +wish-6-external-2 OBJECT IDENTIFIER ::= { wish-6-external 2 } +wish-7 OBJECT IDENTIFIER ::= { wireless 7 } +wish-7-sensors OBJECT IDENTIFIER ::= { wish-7 4 } +wish-7-internal OBJECT IDENTIFIER ::= { wish-7-sensors 1 } +wish-7-external OBJECT IDENTIFIER ::= { wish-7-sensors 2 } +wish-7-external-1 OBJECT IDENTIFIER ::= { wish-7-external 1 } +wish-7-external-2 OBJECT IDENTIFIER ::= { wish-7-external 2 } +wish-8 OBJECT IDENTIFIER ::= { wireless 8 } +wish-8-sensors OBJECT IDENTIFIER ::= { wish-8 4 } +wish-8-internal OBJECT IDENTIFIER ::= { wish-8-sensors 1 } +wish-8-external OBJECT IDENTIFIER ::= { wish-8-sensors 2 } +wish-8-external-1 OBJECT IDENTIFIER ::= { wish-8-external 1 } +wish-8-external-2 OBJECT IDENTIFIER ::= { wish-8-external 2 } +wish-9 OBJECT IDENTIFIER ::= { wireless 9 } +wish-9-sensors OBJECT IDENTIFIER ::= { wish-9 4 } +wish-9-internal OBJECT IDENTIFIER ::= { wish-9-sensors 1 } +wish-9-external OBJECT IDENTIFIER ::= { wish-9-sensors 2 } +wish-9-external-1 OBJECT IDENTIFIER ::= { wish-9-external 1 } +wish-9-external-2 OBJECT IDENTIFIER ::= { wish-9-external 2 } +wish-10 OBJECT IDENTIFIER ::= { wireless 10 } +wish-10-sensors OBJECT IDENTIFIER ::= { wish-10 4 } +wish-10-internal OBJECT IDENTIFIER ::= { wish-10-sensors 1 } +wish-10-external OBJECT IDENTIFIER ::= { wish-10-sensors 2 } +wish-10-external-1 OBJECT IDENTIFIER ::= { wish-10-external 1 } +wish-10-external-2 OBJECT IDENTIFIER ::= { wish-10-external 2 } +wish-11 OBJECT IDENTIFIER ::= { wireless 11 } +wish-11-sensors OBJECT IDENTIFIER ::= { wish-11 4 } +wish-11-internal OBJECT IDENTIFIER ::= { wish-11-sensors 1 } +wish-11-external OBJECT IDENTIFIER ::= { wish-11-sensors 2 } +wish-11-external-1 OBJECT IDENTIFIER ::= { wish-11-external 1 } +wish-11-external-2 OBJECT IDENTIFIER ::= { wish-11-external 2 } +wish-12 OBJECT IDENTIFIER ::= { wireless 12 } +wish-12-sensors OBJECT IDENTIFIER ::= { wish-12 4 } +wish-12-internal OBJECT IDENTIFIER ::= { wish-12-sensors 1 } +wish-12-external OBJECT IDENTIFIER ::= { wish-12-sensors 2 } +wish-12-external-1 OBJECT IDENTIFIER ::= { wish-12-external 1 } +wish-12-external-2 OBJECT IDENTIFIER ::= { wish-12-external 2 } +wish-13 OBJECT IDENTIFIER ::= { wireless 13 } +wish-13-sensors OBJECT IDENTIFIER ::= { wish-13 4 } +wish-13-internal OBJECT IDENTIFIER ::= { wish-13-sensors 1 } +wish-13-external OBJECT IDENTIFIER ::= { wish-13-sensors 2 } +wish-13-external-1 OBJECT IDENTIFIER ::= { wish-13-external 1 } +wish-13-external-2 OBJECT IDENTIFIER ::= { wish-13-external 2 } +wish-14 OBJECT IDENTIFIER ::= { wireless 14 } +wish-14-sensors OBJECT IDENTIFIER ::= { wish-14 4 } +wish-14-internal OBJECT IDENTIFIER ::= { wish-14-sensors 1 } +wish-14-external OBJECT IDENTIFIER ::= { wish-14-sensors 2 } +wish-14-external-1 OBJECT IDENTIFIER ::= { wish-14-external 1 } +wish-14-external-2 OBJECT IDENTIFIER ::= { wish-14-external 2 } +wish-15 OBJECT IDENTIFIER ::= { wireless 15 } +wish-15-sensors OBJECT IDENTIFIER ::= { wish-15 4 } +wish-15-internal OBJECT IDENTIFIER ::= { wish-15-sensors 1 } +wish-15-external OBJECT IDENTIFIER ::= { wish-15-sensors 2 } +wish-15-external-1 OBJECT IDENTIFIER ::= { wish-15-external 1 } +wish-15-external-2 OBJECT IDENTIFIER ::= { wish-15-external 2 } +traps OBJECT IDENTIFIER ::= { roomalert32E 2 } +lighttowers OBJECT IDENTIFIER ::= { roomalert32E 3 } +lighttower1 OBJECT IDENTIFIER ::= { lighttowers 1 } +lighttower2 OBJECT IDENTIFIER ::= { lighttowers 2 } + +-- Room Alert 32E MIB +-- Parameters + + +internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The internal temperature reading in Fahrenheit." +::= { temperature 1 } + +internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The internal temperature reading in Celsius." +::= { temperature 2 } + +internal-humidity OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The internal relative humidity reading in %RH." +::= { humidity 1 } + +internal-heat-index OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS optional + DESCRIPTION "The internal heat index reading in Fahrenheit." +::= { heat-index 1 } + +internal-heat-indexC OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS optional + DESCRIPTION "The internal heat index reading in Celsius." +::= { heat-index 2 } + +internal-power OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current status of the Room Alert 32E power supply. A '1' indicates the unit is running on AC/Utility power. A '0' indicates the unit is running on battery backup power." +::= { power 1 } + +internal-analog1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current status of the Room Alert 32E analog input (0-5VDC)." +::= { analog 1 } + +internal-analog2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current status of the Room Alert 32E analog input (0-5VDC)." +::= { analog 2 } + +internal-relay1 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the on-board relay output" +::= { relay 1 } + +internal-relay2 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the on-board relay output" +::= { relay 2 } + +digital-sen1-1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius." +::= { digital-sen1 1 } + +digital-sen1-2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit." +::= { digital-sen1 2 } + +digital-sen1-3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)." +::= { digital-sen1 3 } + +digital-sen1-4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading." +::= { digital-sen1 4 } + +digital-sen1-5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { digital-sen1 5 } + +digital-sen2-1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius." +::= { digital-sen2 1 } + +digital-sen2-2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit." +::= { digital-sen2 2 } + +digital-sen2-3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)." +::= { digital-sen2 3 } + +digital-sen2-4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading." +::= { digital-sen2 4 } + +digital-sen2-5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { digital-sen2 5 } + +digital-sen3-1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius." +::= { digital-sen3 1 } + +digital-sen3-2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit." +::= { digital-sen3 2 } + +digital-sen3-3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)." +::= { digital-sen3 3 } + +digital-sen3-4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading." +::= { digital-sen3 4 } + +digital-sen3-5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { digital-sen3 5 } + +digital-sen4-1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius." +::= { digital-sen4 1 } + +digital-sen4-2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit." +::= { digital-sen4 2 } + +digital-sen4-3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)." +::= { digital-sen4 3 } + +digital-sen4-4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading." +::= { digital-sen4 4 } + +digital-sen4-5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { digital-sen4 5 } + +digital-sen5-1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius." +::= { digital-sen5 1 } + +digital-sen5-2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit." +::= { digital-sen5 2 } + +digital-sen5-3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)." +::= { digital-sen5 3 } + +digital-sen5-4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading." +::= { digital-sen5 4 } + +digital-sen5-5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { digital-sen5 5 } + +digital-sen6-1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius." +::= { digital-sen6 1 } + +digital-sen6-2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit." +::= { digital-sen6 2 } + +digital-sen6-3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)." +::= { digital-sen6 3 } + +digital-sen6-4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading." +::= { digital-sen6 4 } + +digital-sen6-5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { digital-sen6 5 } + +digital-sen7-1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius." +::= { digital-sen7 1 } + +digital-sen7-2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit." +::= { digital-sen7 2 } + +digital-sen7-3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)." +::= { digital-sen7 3 } + +digital-sen7-4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading." +::= { digital-sen7 4 } + +digital-sen7-5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { digital-sen7 5 } + +digital-sen8-1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius." +::= { digital-sen8 1 } + +digital-sen8-2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit." +::= { digital-sen8 2 } + +digital-sen8-3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)." +::= { digital-sen8 3 } + +digital-sen8-4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading." +::= { digital-sen8 4 } + +digital-sen8-5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { digital-sen8 5 } + +switch-sen1 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED)." +::= { switch 1 } + +switch-sen2 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED)." +::= { switch 2 } + +switch-sen3 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED)." +::= { switch 3 } + +switch-sen4 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED)." +::= { switch 4 } + +switch-sen5 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 5 (0 = OPEN, 1 = CLOSED)." +::= { switch 5 } + +switch-sen6 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 6 (0 = OPEN, 1 = CLOSED)." +::= { switch 6 } + +switch-sen7 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 7 (0 = OPEN, 1 = CLOSED)." +::= { switch 7 } + +switch-sen8 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 8 (0 = OPEN, 1 = CLOSED)." +::= { switch 8 } + +switch-sen9 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 9 (0 = OPEN, 1 = CLOSED)." +::= { switch 9 } + +switch-sen10 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 10 (0 = OPEN, 1 = CLOSED)." +::= { switch 10 } + +switch-sen11 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 11 (0 = OPEN, 1 = CLOSED)." +::= { switch 11 } + +switch-sen12 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 12 (0 = OPEN, 1 = CLOSED)." +::= { switch 12 } + +switch-sen13 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 13 (0 = OPEN, 1 = CLOSED)." +::= { switch 13 } + +switch-sen14 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 14 (0 = OPEN, 1 = CLOSED)." +::= { switch 14 } + +switch-sen15 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 15 (0 = OPEN, 1 = CLOSED)." +::= { switch 15 } + +switch-sen16 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor 16 (0 = OPEN, 1 = CLOSED)." +::= { switch 16 } + +wish-1-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-1 1 } + +wish-1-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-1 2 } + +wish-1-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-1 3 } + +wish-1-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-1-internal 1 } + +wish-1-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-1-internal 2 } + +wish-1-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-1-internal 3 } + +wish-1-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-1-external-1 1 } + +wish-1-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-1-external-1 2 } + +wish-1-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-1-external-1 3 } + +wish-1-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-1-external-1 4 } + +wish-1-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-1-external-1 5 } + +wish-1-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-1-external-1 6 } + +wish-1-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-1-external-2 1 } + +wish-1-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-1-external-2 2 } + +wish-1-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-1-external-2 3 } + +wish-1-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-1-external-2 4 } + +wish-1-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-1-external-2 5 } + +wish-1-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-1-external-2 6 } + +wish-1-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-1-external 3 } + +wish-2-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-2 1 } + +wish-2-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-2 2 } + +wish-2-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-2 3 } + +wish-2-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-2-internal 1 } + +wish-2-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-2-internal 2 } + +wish-2-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-2-internal 3 } + +wish-2-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-2-external-1 1 } + +wish-2-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-2-external-1 2 } + +wish-2-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-2-external-1 3 } + +wish-2-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-2-external-1 4 } + +wish-2-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-2-external-1 5 } + +wish-2-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-2-external-1 6 } + +wish-2-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-2-external-2 1 } + +wish-2-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-2-external-2 2 } + +wish-2-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-2-external-2 3 } + +wish-2-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-2-external-2 4 } + +wish-2-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-2-external-2 5 } + +wish-2-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-2-external-2 6 } + +wish-2-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-2-external 3 } + +wish-3-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-3 1 } + +wish-3-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-3 2 } + +wish-3-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-3 3 } + +wish-3-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-3-internal 1 } + +wish-3-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-3-internal 2 } + +wish-3-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-3-internal 3 } + +wish-3-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-3-external-1 1 } + +wish-3-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-3-external-1 2 } + +wish-3-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-3-external-1 3 } + +wish-3-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-3-external-1 4 } + +wish-3-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-3-external-1 5 } + +wish-3-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-3-external-1 6 } + +wish-3-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-3-external-2 1 } + +wish-3-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-3-external-2 2 } + +wish-3-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-3-external-2 3 } + +wish-3-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-3-external-2 4 } + +wish-3-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-3-external-2 5 } + +wish-3-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-3-external-2 6 } + +wish-3-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-3-external 3 } + +wish-4-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-4 1 } + +wish-4-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-4 2 } + +wish-4-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-4 3 } + +wish-4-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-4-internal 1 } + +wish-4-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-4-internal 2 } + +wish-4-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-4-internal 3 } + +wish-4-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-4-external-1 1 } + +wish-4-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-4-external-1 2 } + +wish-4-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-4-external-1 3 } + +wish-4-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-4-external-1 4 } + +wish-4-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-4-external-1 5 } + +wish-4-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-4-external-1 6 } + +wish-4-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-4-external-2 1 } + +wish-4-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-4-external-2 2 } + +wish-4-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-4-external-2 3 } + +wish-4-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-4-external-2 4 } + +wish-4-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-4-external-2 5 } + +wish-4-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-4-external-2 6 } + +wish-4-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-4-external 3 } + +wish-5-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-5 1 } + +wish-5-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-5 2 } + +wish-5-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-5 3 } + +wish-5-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-5-internal 1 } + +wish-5-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-5-internal 2 } + +wish-5-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-5-internal 3 } + +wish-5-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-5-external-1 1 } + +wish-5-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-5-external-1 2 } + +wish-5-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-5-external-1 3 } + +wish-5-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-5-external-1 4 } + +wish-5-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-5-external-1 5 } + +wish-5-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-5-external-1 6 } + +wish-5-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-5-external-2 1 } + +wish-5-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-5-external-2 2 } + +wish-5-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-5-external-2 3 } + +wish-5-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-5-external-2 4 } + +wish-5-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-5-external-2 5 } + +wish-5-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-5-external-2 6 } + +wish-5-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-5-external 3 } + +wish-6-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-6 1 } + +wish-6-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-6 2 } + +wish-6-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-6 3 } + +wish-6-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-6-internal 1 } + +wish-6-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-6-internal 2 } + +wish-6-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-6-internal 3 } + +wish-6-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-6-external-1 1 } + +wish-6-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-6-external-1 2 } + +wish-6-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-6-external-1 3 } + +wish-6-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-6-external-1 4 } + +wish-6-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-6-external-1 5 } + +wish-6-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-6-external-1 6 } + +wish-6-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-6-external-2 1 } + +wish-6-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-6-external-2 2 } + +wish-6-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-6-external-2 3 } + +wish-6-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-6-external-2 4 } + +wish-6-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-6-external-2 5 } + +wish-6-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-6-external-2 6 } + +wish-6-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-6-external 3 } + +wish-7-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-7 1 } + +wish-7-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-7 2 } + +wish-7-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-7 3 } + +wish-7-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-7-internal 1 } + +wish-7-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-7-internal 2 } + +wish-7-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-7-internal 3 } + +wish-7-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-7-external-1 1 } + +wish-7-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-7-external-1 2 } + +wish-7-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-7-external-1 3 } + +wish-7-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-7-external-1 4 } + +wish-7-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-7-external-1 5 } + +wish-7-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-7-external-1 6 } + +wish-7-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-7-external-2 1 } + +wish-7-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-7-external-2 2 } + +wish-7-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-7-external-2 3 } + +wish-7-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-7-external-2 4 } + +wish-7-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-7-external-2 5 } + +wish-7-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-7-external-2 6 } + +wish-7-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-7-external 3 } + +wish-8-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-8 1 } + +wish-8-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-8 2 } + +wish-8-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-8 3 } + +wish-8-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-8-internal 1 } + +wish-8-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-8-internal 2 } + +wish-8-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-8-internal 3 } + +wish-8-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-8-external-1 1 } + +wish-8-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-8-external-1 2 } + +wish-8-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-8-external-1 3 } + +wish-8-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-8-external-1 4 } + +wish-8-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-8-external-1 5 } + +wish-8-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-8-external-1 6 } + +wish-8-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-8-external-2 1 } + +wish-8-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-8-external-2 2 } + +wish-8-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-8-external-2 3 } + +wish-8-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-8-external-2 4 } + +wish-8-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-8-external-2 5 } + +wish-8-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-8-external-2 6 } + +wish-8-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-8-external 3 } + +wish-9-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-9 1 } + +wish-9-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-9 2 } + +wish-9-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-9 3 } + +wish-9-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-9-internal 1 } + +wish-9-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-9-internal 2 } + +wish-9-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-9-internal 3 } + +wish-9-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-9-external-1 1 } + +wish-9-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-9-external-1 2 } + +wish-9-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-9-external-1 3 } + +wish-9-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-9-external-1 4 } + +wish-9-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-9-external-1 5 } + +wish-9-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-9-external-1 6 } + +wish-9-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-9-external-2 1 } + +wish-9-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-9-external-2 2 } + +wish-9-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-9-external-2 3 } + +wish-9-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-9-external-2 4 } + +wish-9-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-9-external-2 5 } + +wish-9-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-9-external-2 6 } + +wish-9-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-9-external 3 } + +wish-10-enabled OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled." +::= { wish-10 1 } + +wish-10-serial-num OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "The unique serial number for this WiSH/WiSPR Sensor." +::= { wish-10 2 } + +wish-10-updates OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current update interval for this WiSH/WiSPR Sensor." +::= { wish-10 3 } + +wish-10-battery-voltage OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current voltage reading of the internal battery for this WiSH/WiSPR Sensor." +::= { wish-10-internal 1 } + +wish-10-internal-tempc OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor." +::= { wish-10-internal 2 } + +wish-10-internal-tempf OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor." +::= { wish-10-internal 3 } + +wish-10-external-1-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-10-external-1 1 } + +wish-10-external-1-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-10-external-1 2 } + +wish-10-external-1-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-10-external-1 3 } + +wish-10-external-1-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-10-external-1 4 } + +wish-10-external-1-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-10-external-1 5 } + +wish-10-external-1-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-10-external-1 6 } + +wish-10-external-2-type OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor." +::= { wish-10-external-2 1 } + +wish-10-external-2-val1 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius." +::= { wish-10-external-2 2 } + +wish-10-external-2-val2 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit." +::= { wish-10-external-2 3 } + +wish-10-external-2-val3 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts." +::= { wish-10-external-2 4 } + +wish-10-external-2-val4 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value." +::= { wish-10-external-2 5 } + +wish-10-external-2-val5 OBJECT-TYPE + SYNTAX INTEGER(0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius." +::= { wish-10-external-2 6 } + +wish-10-external-switch OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)." +::= { wish-10-external 3 } + +alarmmessage OBJECT-TYPE + SYNTAX OCTET STRING + ACCESS read-only + STATUS mandatory + DESCRIPTION "Last Alarm Message" +::= { traps 1 } + + +-- Lighttower1 + +lighttower1-RE OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the red LED on the Light Tower." +::= { lighttower1 1 } + +lighttower1-OR OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the orange LED on the Light Tower." +::= { lighttower1 2 } + +lighttower1-GR OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the green LED on the Light Tower." +::= { lighttower1 3 } + +lighttower1-WH OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the white LED on the Light Tower." +::= { lighttower1 4 } + +lighttower1-BL OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the blue LED on the Light Tower." +::= { lighttower1 5 } + +lighttower1-A1 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the 1st audio alarm on the Light Tower." +::= { lighttower1 6 } + +lighttower1-A2 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the 2nd audio alarm on the Light Tower." +::= { lighttower1 7 } + +lighttower1-RL OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the LTA's on-board relay output" +::= { lighttower1 8 } + + +-- Lighttower2 + +lighttower2-RE OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the red LED on the Light Tower." +::= { lighttower2 1 } + +lighttower2-OR OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the orange LED on the Light Tower." +::= { lighttower2 2 } + +lighttower2-GR OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the green LED on the Light Tower." +::= { lighttower2 3 } + +lighttower2-WH OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the white LED on the Light Tower." +::= { lighttower2 4 } + +lighttower2-BL OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the blue LED on the Light Tower." +::= { lighttower2 5 } + +lighttower2-A1 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the 1st audio alarm on the Light Tower." +::= { lighttower2 6 } + +lighttower2-A2 OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the 2nd audio alarm on the Light Tower." +::= { lighttower2 7 } + +lighttower2-RL OBJECT-TYPE + SYNTAX INTEGER(0..1) + ACCESS read-write + STATUS mandatory + DESCRIPTION "The status of the LTA's on-board relay output" +::= { lighttower2 8 } + + +-- ROOMALERT32E TRAPS + +tempalarm1-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A tempalarm1 trap signifies that the current + temperature on external sensor 1 is outside the + defined high or low threshold." +::= 1 + +room-alert-32E-snmp-trap TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A room-alert-32E-snmp-trap indicates that an alarm + condition has occurred on the sensor inidcated + by the alarmMessage variable." +::= 2 + +tempalarm2-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A tempalarm2 trap signifies that the current + temperature on external sensor 2 is outside the + defined high or low threshold." +::= 3 + +tempclear2-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A tempclear2 trap signifies that the current + temperature on external sensor 2 has returned to + a normal condition and is within the defined + high or low threshold." +::= 4 + +tempalarm3-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A tempalarm3 trap signifies that the current + temperature on external sensor 3 is outside the + defined high or low threshold." +::= 5 + +tempclear3-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A tempclear3 trap signifies that the current + temperature on external sensor 3 has returned to + a normal condition and is within the defined + high or low threshold." +::= 6 + +humidityalarm1-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A humidityalarm1 trap signifies that the current + humidity on external sensor 1 is outside the + defined high or low threshold." +::= 7 + +humidityclear1-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A humidityclear1 trap signifies that the current + humidity on external sensor 1 has returned to + a normal condition and is within the defined + high or low threshold." +::= 8 + +humidityalarm2-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A humidityalarm2 trap signifies that the current + humidity on external sensor 2 is outside the + defined high or low threshold." +::= 9 + +humidityclear2-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A humidityclear2 trap signifies that the current + humidity on external sensor 2 has returned to + a normal condition and is within the defined + high or low threshold." +::= 10 + +humidityalarm3-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A humidityalarm3 trap signifies that the current + humidity on external sensor 3 is outside the + defined high or low threshold." +::= 11 + +humidityclear3-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A humidityclear3 trap signifies that the current + humidity on external sensor 3 has returned to + a normal condition and is within the defined + high or low threshold." +::= 12 + +switchalarm1-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchalarm1 trap signifies that switch sensor 1 + is in an alarm state." +::= 13 + +switchclear1-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchclear1 trap signifies that the switch sensor 1 + has returned to a normal state." +::= 14 + +switchalarm2-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchalarm2 trap signifies that switch sensor 2 + is in an alarm state." +::= 15 + +switchclear2-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchclear2 trap signifies that the switch sensor 2 + has returned to a normal state." +::= 16 + +switchalarm3-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchalarm3 trap signifies that switch sensor 3 + is in an alarm state." +::= 17 + +switchclear3-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchclear3 trap signifies that the switch sensor 3 + has returned to a normal state." +::= 18 + +switchalarm4-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchalarm4 trap signifies that switch sensor 4 + is in an alarm state." +::= 19 + +switchclear4-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchclear4 trap signifies that the switch sensor 4 + has returned to a normal state." +::= 20 + +switchalarm5-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchalarm5 trap signifies that switch sensor 5 + is in an alarm state." +::= 21 + +switchclear5-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchclear5 trap signifies that the switch sensor 5 + has returned to a normal state." +::= 22 + +switchalarm6-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchalarm6 trap signifies that switch sensor 6 + is in an alarm state." +::= 23 + +switchclear6-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchclear6 trap signifies that the switch sensor 6 + has returned to a normal state." +::= 24 + +switchalarm7-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchalarm7 trap signifies that switch sensor 7 + is in an alarm state." +::= 25 + +switchclear7-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchclear7 trap signifies that the switch sensor 7 + has returned to a normal state." +::= 26 + +switchalarm8-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchalarm8 trap signifies that switch sensor 8 + is in an alarm state." +::= 27 + +switchclear8-32E TRAP-TYPE + ENTERPRISE roomalert32E + VARIABLES { alarmmessage } + DESCRIPTION "A switchclear8 trap signifies that the switch sensor 8 + has returned to a normal state." +::= 28 +END |