diff options
Diffstat (limited to 'MIBS/bktel/BKTEL-HFC862-OA-V01-MIB')
| -rw-r--r-- | MIBS/bktel/BKTEL-HFC862-OA-V01-MIB | 2407 |
1 files changed, 2407 insertions, 0 deletions
diff --git a/MIBS/bktel/BKTEL-HFC862-OA-V01-MIB b/MIBS/bktel/BKTEL-HFC862-OA-V01-MIB new file mode 100644 index 0000000..0cd11b1 --- /dev/null +++ b/MIBS/bktel/BKTEL-HFC862-OA-V01-MIB @@ -0,0 +1,2407 @@ +-- ********************************************************************************************* +-- * +-- * Description: Implements definitions for the Optical Amplifiers +-- * +-- * Note: This specification is written for the new high power optical anplifiers, +-- * but is intended to represent all new optical amplifiers in the future !!! +-- * That is why a superset of all optical amplifier features is specified here. +-- * +-- * Copyright 2007 by BKtel communications GmbH +-- * +-- * V.0.1 23.03.2007 M. Heldmann first draft +-- * V.0.2 25.04.2007 M. Heldmann some items added to oaDisplayTable +-- * V.0.3 01.06.2007 M. Heldmann changed oaStatesTecHeatHigh to oaStatesTecCurrentLow +-- * and oaStatesTecCoolHigh to oaStatesTecCurrentHigh +-- * V.0.4 12.09.2007 M. Heldmann adjusted 'LaserFeatures' type strings +-- * (max. stringsize less than 64 characters) +-- * V.0.5 04.04.2008 M. Heldmann oaReturnLossLoLo..oaReturnLossHiHi made read-write +-- * (same behaviour as in web-interface) +-- * V.0.6 22.03.2013 M. Heldmann added raman-type amplifier extensions +-- * oaStatesRamanBackReflectionRatio, oaStatesRamanOscSignalMissing +-- * and oaDisplayAmplifierIsRamanType +-- * V.0.7 11.07.2013 M. Heldmann adjusted syntax of "CommonEntry" to remove MIB compiler warnings +-- * V.0.8 06.05.2014 M. Heldmann marked all internal voltage parameters as 'optional' +-- * V.0.9 05.09.2014 M. Heldmann changed CommonModuleWidth and ConfigNESlotWrite STATUS to optional +-- ********************************************************************************************* + + +BKTEL-HFC862-OA-V01-MIB DEFINITIONS ::= BEGIN + + IMPORTS + OBJECT-TYPE + FROM RFC-1212 + modules, DisplayString, TruthValue, PerceivedSeverityValue, NESlotValue, ModuleWidthValue + FROM BKTEL-HFC862-BASE-MIB + ; + + oa OBJECT IDENTIFIER ::= { modules 116 } + oaCommon OBJECT IDENTIFIER ::= { oa 1 } + oaStates OBJECT IDENTIFIER ::= { oa 2 } + oaConfiguration OBJECT IDENTIFIER ::= { oa 3 } + oaControl OBJECT IDENTIFIER ::= { oa 4 } + oaMeasuringValues OBJECT IDENTIFIER ::= { oa 5 } + oaDisplay OBJECT IDENTIFIER ::= { oa 6 } + + +-- +-- Type definitions +-- + + + RegulationMode ::= INTEGER + { + regModeConstantOutputPower(1), + regModeConstantGain(2) + } + + SbsEvaluationMode ::= INTEGER + { + evalModeDefault(1), + evalModeFullScan(2) + } + + SbsEvaluationState ::= INTEGER + { + evaluationNotSupported(1), + evaluationDone(2), + evaluationInProgress(3), + evaluationFailed(4) + } + + ExtIOmode ::= INTEGER + { + modeActiveLowOutput(1), + modeActiveHighOutput(2), + modeRedundantMasterIrreversible(3), + modeRedundantMasterFallback(4), + modeRedundantSlave(5) + } + + ExtIOmask ::= INTEGER + { + maskAlarmsOnly(1), + maskAlarmsAndWarnings(2), + maskSpecial(3) -- This item is NOT writable !! + } + + LaserFeatures ::= INTEGER + { + lasNonExistent(0), + lasCurrent(1), + lasCurrentLasTec(3), + lasCurrentLasTemperature(5), + lasCurrentLasTecLasTemperature(7), + lasCurrentLasVoltage(9), + lasCurrentLasTecLasVoltage(11), + lasCurrentLasTemperatureLasVoltage(13), + lasCurrentLasTecLasTemperatureLasVoltage(15), + lasCurrentLasPumpPower(17), + lasCurrentLasTecLasPumpPower(19), + lasCurrentLasTemperatureLasPumpPower(21), + lasCurrentLasTecLasTemperatureLasPumpPower(23), + lasCurrentLasVoltageLasPumpPower(25), + lasCurrentLasTecLasVoltageLasPumpPower(27), + lasCurrentLasTemperatureLasVoltageLasPumpPower(29), + lasCurrentLasTecLasTemperatureLasVoltageLasPumpPower(31) + } + + NESlotWriteValue ::= INTEGER (-1..99) + + +-- MibCompiler defs -- +-- $idx$: InternalVoltage +-- $idx$: Laser +-- MibCompiler defs -- + +--***************************************************************************************** +-- OA ( Optical Amplifier) + +--***************************************************************************************** +-- oaCommon group + + oaCommonNumberOfModules OBJECT-TYPE + SYNTAX INTEGER(0..50) + ACCESS read-only + STATUS mandatory + DESCRIPTION "Number of modules in table." + ::= { oaCommon 1 } + + oaCommonTable OBJECT-TYPE + SYNTAX SEQUENCE OF OaCommonEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The table contains all modules of the OA-type in the NE" + ::= { oaCommon 2 } + +-- table of states entry(ro/rw) + + oaCommonEntry OBJECT-TYPE + SYNTAX OaCommonEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Common-Values for a module." + INDEX { oaNESlot } + ::= { oaCommonTable 1 } + +-- the structure of the entry + + OaCommonEntry ::= SEQUENCE + { + oaNESlot NESlotValue, + oaCommonType DisplayString, + oaCommonDescr DisplayString, + oaCommonFirmwareId DisplayString, + oaCommonModuleWidth ModuleWidthValue + } + + oaNESlot OBJECT-TYPE + SYNTAX NESlotValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The slot number of the chassis for which this + entry contains management information." + ::= { oaCommonEntry 1 } + + oaCommonType OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of physical module. modSlotEmpty indicates + an empty slot. A Value of modSlotUnknown indicates + that the type of module is unknown." + ::= { oaCommonEntry 2 } + + oaCommonDescr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A textual description of the module. + If not available, this Value should be + set to a zero length string." + ::= { oaCommonEntry 3 } + + oaCommonFirmwareId OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The firmware Id of the module." + ::= { oaCommonEntry 4 } + + oaCommonModuleWidth OBJECT-TYPE + SYNTAX ModuleWidthValue + ACCESS read-only + STATUS optional + DESCRIPTION "The width of the module in multiples of slots (1, 2, ...)" + ::= { oaCommonEntry 5 } + +--***************************************************************************************** +-- oaMeasuringValues group +-- +-- !!! NOTE !!! +-- +-- Measuring values in this table that are not supported by the device +-- return zero for the value and its limits. + +-- table of measuring Values + + oaMeasuringValuesTable OBJECT-TYPE + SYNTAX SEQUENCE OF OaMeasuringValuesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { oaMeasuringValues 1 } + +-- table of measuring Values entry + + oaMeasuringValuesEntry OBJECT-TYPE + SYNTAX OaMeasuringValuesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Common-Values for a module." + INDEX { oaNESlot } + ::= { oaMeasuringValuesTable 1 } + +-- the structure of the entry + + OaMeasuringValuesEntry ::= SEQUENCE + { + oaTemperatureLoLo INTEGER, + oaTemperatureLo INTEGER, + oaTemperatureValue INTEGER, + oaTemperatureHi INTEGER, + oaTemperatureHiHi INTEGER, + + oaInputPowerLoLo INTEGER, + oaInputPowerLo INTEGER, + oaInputPowerValue INTEGER, + oaInputPowerHi INTEGER, + oaInputPowerHiHi INTEGER, + + oaOutputPwrOrGainLoLo INTEGER, + oaOutputPwrOrGainLo INTEGER, + oaOutputPwrOrGainValue INTEGER, + oaOutputPwrOrGainHi INTEGER, + oaOutputPwrOrGainHiHi INTEGER, + + oaReturnLossLoLo INTEGER, + oaReturnLossLo INTEGER, + oaReturnLossValue INTEGER, + oaReturnLossHi INTEGER, + oaReturnLossHiHi INTEGER, + + oaInputVoltageLoLo INTEGER, + oaInputVoltageLo INTEGER, + oaInputVoltageValue INTEGER, + oaInputVoltageHi INTEGER, + oaInputVoltageHiHi INTEGER, + + oaInternalVoltage1LoLo INTEGER, + oaInternalVoltage1Lo INTEGER, + oaInternalVoltage1Value INTEGER, + oaInternalVoltage1Hi INTEGER, + oaInternalVoltage1HiHi INTEGER, + + oaInternalVoltage2LoLo INTEGER, + oaInternalVoltage2Lo INTEGER, + oaInternalVoltage2Value INTEGER, + oaInternalVoltage2Hi INTEGER, + oaInternalVoltage2HiHi INTEGER, + + oaInternalVoltage3LoLo INTEGER, + oaInternalVoltage3Lo INTEGER, + oaInternalVoltage3Value INTEGER, + oaInternalVoltage3Hi INTEGER, + oaInternalVoltage3HiHi INTEGER, + + -- *** + + oaLaser1CurrentRelLoLo INTEGER, + oaLaser1CurrentRelLo INTEGER, + oaLaser1CurrentRelValue INTEGER, + oaLaser1CurrentRelHi INTEGER, + oaLaser1CurrentRelHiHi INTEGER, + + oaLaser1TecRelLoLo INTEGER, + oaLaser1TecRelLo INTEGER, + oaLaser1TecRelValue INTEGER, + oaLaser1TecRelHi INTEGER, + oaLaser1TecRelHiHi INTEGER, + + oaLaser1TemperatureLoLo INTEGER, + oaLaser1TemperatureLo INTEGER, + oaLaser1TemperatureValue INTEGER, + oaLaser1TemperatureHi INTEGER, + oaLaser1TemperatureHiHi INTEGER, + + oaLaser1VoltageLoLo INTEGER, + oaLaser1VoltageLo INTEGER, + oaLaser1VoltageValue INTEGER, + oaLaser1VoltageHi INTEGER, + oaLaser1VoltageHiHi INTEGER, + + -- *** + + oaLaser2CurrentRelLoLo INTEGER, + oaLaser2CurrentRelLo INTEGER, + oaLaser2CurrentRelValue INTEGER, + oaLaser2CurrentRelHi INTEGER, + oaLaser2CurrentRelHiHi INTEGER, + + oaLaser2TecRelLoLo INTEGER, + oaLaser2TecRelLo INTEGER, + oaLaser2TecRelValue INTEGER, + oaLaser2TecRelHi INTEGER, + oaLaser2TecRelHiHi INTEGER, + + oaLaser2TemperatureLoLo INTEGER, + oaLaser2TemperatureLo INTEGER, + oaLaser2TemperatureValue INTEGER, + oaLaser2TemperatureHi INTEGER, + oaLaser2TemperatureHiHi INTEGER, + + oaLaser2VoltageLoLo INTEGER, + oaLaser2VoltageLo INTEGER, + oaLaser2VoltageValue INTEGER, + oaLaser2VoltageHi INTEGER, + oaLaser2VoltageHiHi INTEGER, + + -- *** + + oaLaser3CurrentRelLoLo INTEGER, + oaLaser3CurrentRelLo INTEGER, + oaLaser3CurrentRelValue INTEGER, + oaLaser3CurrentRelHi INTEGER, + oaLaser3CurrentRelHiHi INTEGER, + + oaLaser3TecRelLoLo INTEGER, + oaLaser3TecRelLo INTEGER, + oaLaser3TecRelValue INTEGER, + oaLaser3TecRelHi INTEGER, + oaLaser3TecRelHiHi INTEGER, + + oaLaser3TemperatureLoLo INTEGER, + oaLaser3TemperatureLo INTEGER, + oaLaser3TemperatureValue INTEGER, + oaLaser3TemperatureHi INTEGER, + oaLaser3TemperatureHiHi INTEGER, + + oaLaser3VoltageLoLo INTEGER, + oaLaser3VoltageLo INTEGER, + oaLaser3VoltageValue INTEGER, + oaLaser3VoltageHi INTEGER, + oaLaser3VoltageHiHi INTEGER, + + -- *** + + oaLaser4CurrentRelLoLo INTEGER, + oaLaser4CurrentRelLo INTEGER, + oaLaser4CurrentRelValue INTEGER, + oaLaser4CurrentRelHi INTEGER, + oaLaser4CurrentRelHiHi INTEGER, + + oaLaser4TecRelLoLo INTEGER, + oaLaser4TecRelLo INTEGER, + oaLaser4TecRelValue INTEGER, + oaLaser4TecRelHi INTEGER, + oaLaser4TecRelHiHi INTEGER, + + oaLaser4TemperatureLoLo INTEGER, + oaLaser4TemperatureLo INTEGER, + oaLaser4TemperatureValue INTEGER, + oaLaser4TemperatureHi INTEGER, + oaLaser4TemperatureHiHi INTEGER, + + oaLaser4VoltageLoLo INTEGER, + oaLaser4VoltageLo INTEGER, + oaLaser4VoltageValue INTEGER, + oaLaser4VoltageHi INTEGER, + oaLaser4VoltageHiHi INTEGER, + + -- *** + + oaLaser5CurrentRelLoLo INTEGER, + oaLaser5CurrentRelLo INTEGER, + oaLaser5CurrentRelValue INTEGER, + oaLaser5CurrentRelHi INTEGER, + oaLaser5CurrentRelHiHi INTEGER, + + oaLaser5TecRelLoLo INTEGER, + oaLaser5TecRelLo INTEGER, + oaLaser5TecRelValue INTEGER, + oaLaser5TecRelHi INTEGER, + oaLaser5TecRelHiHi INTEGER, + + oaLaser5TemperatureLoLo INTEGER, + oaLaser5TemperatureLo INTEGER, + oaLaser5TemperatureValue INTEGER, + oaLaser5TemperatureHi INTEGER, + oaLaser5TemperatureHiHi INTEGER, + + oaLaser5VoltageLoLo INTEGER, + oaLaser5VoltageLo INTEGER, + oaLaser5VoltageValue INTEGER, + oaLaser5VoltageHi INTEGER, + oaLaser5VoltageHiHi INTEGER, + + -- *** + + oaLaser6CurrentRelLoLo INTEGER, + oaLaser6CurrentRelLo INTEGER, + oaLaser6CurrentRelValue INTEGER, + oaLaser6CurrentRelHi INTEGER, + oaLaser6CurrentRelHiHi INTEGER, + + oaLaser6TecRelLoLo INTEGER, + oaLaser6TecRelLo INTEGER, + oaLaser6TecRelValue INTEGER, + oaLaser6TecRelHi INTEGER, + oaLaser6TecRelHiHi INTEGER, + + oaLaser6TemperatureLoLo INTEGER, + oaLaser6TemperatureLo INTEGER, + oaLaser6TemperatureValue INTEGER, + oaLaser6TemperatureHi INTEGER, + oaLaser6TemperatureHiHi INTEGER, + + oaLaser6VoltageLoLo INTEGER, + oaLaser6VoltageLo INTEGER, + oaLaser6VoltageValue INTEGER, + oaLaser6VoltageHi INTEGER, + oaLaser6VoltageHiHi INTEGER + } + +-- ***** + oaTemperatureLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature low alarm threshold in steps of 0.1 celsius degrees." + ::= { oaMeasuringValuesEntry 1 } + + oaTemperatureLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature low warning threshold in steps of 0.1 celsius degrees." + ::= { oaMeasuringValuesEntry 2 } + + oaTemperatureValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature in steps of 0.1 celsius degrees." + ::= { oaMeasuringValuesEntry 3 } + + oaTemperatureHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature high warning threshold in steps of 0.1 celsius degrees." + ::= { oaMeasuringValuesEntry 4 } + + oaTemperatureHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature high alarm threshold in steps of 0.1 celsius degrees." + ::= { oaMeasuringValuesEntry 5 } + +-- ***** + oaInputPowerLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Input power low alarm threshold in steps of 0.1dBm." + ::= { oaMeasuringValuesEntry 6 } + + oaInputPowerLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Input power low warning threshold in steps of 0.1dBm." + ::= { oaMeasuringValuesEntry 7 } + + oaInputPowerValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Input power in steps of 0.1dBm." + ::= { oaMeasuringValuesEntry 8 } + + oaInputPowerHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Input power high warning threshold in steps of 0.1dBm." + ::= { oaMeasuringValuesEntry 9 } + + oaInputPowerHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Input power high alarm threshold in steps of 0.1dBm." + ::= { oaMeasuringValuesEntry 10 } + +-- ***** + oaOutputPwrOrGainLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Output power (or gain) low alarm threshold in steps of 0.1dB(m). + See oaConfigRegulationMode variable too" + ::= { oaMeasuringValuesEntry 11 } + + oaOutputPwrOrGainLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Output power (or gain) low warning threshold in steps of 0.1dB(m). + See oaConfigRegulationMode variable too" + ::= { oaMeasuringValuesEntry 12 } + + oaOutputPwrOrGainValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Output power (or gain) in steps of 0.1dB(m). + See oaConfigRegulationMode variable too" + ::= { oaMeasuringValuesEntry 13 } + + oaOutputPwrOrGainHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Output power (or gain) high warning threshold in steps of 0.1dB(m). + See oaConfigRegulationMode variable too" + ::= { oaMeasuringValuesEntry 14 } + + oaOutputPwrOrGainHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Output power (or gain) high alarm threshold in steps of 0.1dB(m). + See oaConfigRegulationMode variable too" + ::= { oaMeasuringValuesEntry 15 } + +-- ***** + oaReturnLossLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "ReturnLoss low alarm threshold in steps of 0.1 dB." + ::= { oaMeasuringValuesEntry 16 } + + oaReturnLossLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "ReturnLoss low warning threshold in steps of 0.1 dB." + ::= { oaMeasuringValuesEntry 17 } + + oaReturnLossValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "ReturnLoss in steps of 0.1 dB." + ::= { oaMeasuringValuesEntry 18 } + + oaReturnLossHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "ReturnLoss high warning threshold in steps of 0.1 dB." + ::= { oaMeasuringValuesEntry 19 } + + oaReturnLossHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "ReturnLoss high alarm threshold in steps of 0.1 dB." + ::= { oaMeasuringValuesEntry 20 } + +-- ***** + oaInputVoltageLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The input supply voltage low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 21 } + + oaInputVoltageLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The input supply voltage low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 22 } + + oaInputVoltageValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The input supply voltage in steps of 0.1 Volts. + Input supply voltage nominal value, see 'oaDisplayInputVoltageNominal'" + ::= { oaMeasuringValuesEntry 23 } + + oaInputVoltageHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The input supply voltage high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 24 } + + oaInputVoltageHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The input supply voltage high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 25 } + +-- #####+20 Space reserved for 4 additional measuring values with limits + +-- ########################### Internal Voltages Section ################################## + +-- ***** + oaInternalVoltage1LoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 46 } + + oaInternalVoltage1Lo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 47 } + + oaInternalVoltage1Value OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage in steps of 0.1 Volts. + Internal voltage nominal value, see 'oaDisplayInternalVoltage1Nominal'" + ::= { oaMeasuringValuesEntry 48 } + + oaInternalVoltage1Hi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 49 } + + oaInternalVoltage1HiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 50 } + +-- ***** + oaInternalVoltage2LoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 51 } + + oaInternalVoltage2Lo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 52 } + + oaInternalVoltage2Value OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage in steps of 0.1 Volts. + Internal voltage nominal value, see 'oaDisplayInternalVoltage2Nominal'" + ::= { oaMeasuringValuesEntry 53 } + + oaInternalVoltage2Hi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 54 } + + oaInternalVoltage2HiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 55 } + +-- ***** + oaInternalVoltage3LoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 56 } + + oaInternalVoltage3Lo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 57 } + + oaInternalVoltage3Value OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage in steps of 0.1 Volts. + Internal voltage nominal value, see 'oaDisplayInternalVoltage3Nominal'" + ::= { oaMeasuringValuesEntry 58 } + + oaInternalVoltage3Hi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 59 } + + oaInternalVoltage3HiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The internal voltage high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 60 } + +-- #####+25 Space reserved for 5 additional internal voltage measuring values with limits + +-- ################################### Lasers Section ################################## + +-- *********************************** + oaLaser1CurrentRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 86 } + + oaLaser1CurrentRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 87 } + + oaLaser1CurrentRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The laser no.1 current relative to the current at begin of life in steps of 0.1%." + ::= { oaMeasuringValuesEntry 88 } + + oaLaser1CurrentRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 89 } + + oaLaser1CurrentRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 90 } + +-- ***** + oaLaser1TecRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 91 } + + oaLaser1TecRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 92 } + + oaLaser1TecRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%." + ::= { oaMeasuringValuesEntry 93 } + + oaLaser1TecRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 94 } + + oaLaser1TecRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 95 } + +-- ***** + oaLaser1TemperatureLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 96 } + + oaLaser1TemperatureLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 97 } + + oaLaser1TemperatureValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 98 } + + oaLaser1TemperatureHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 99 } + + oaLaser1TemperatureHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 100 } + +-- ***** + oaLaser1VoltageLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 101 } + + oaLaser1VoltageLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 102 } + + oaLaser1VoltageValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 103 } + + oaLaser1VoltageHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 104 } + + oaLaser1VoltageHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 105 } + +-- #####+5 Space reserved for 1 additional laser measuring value with limits + +-- *********************************** + oaLaser2CurrentRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 111 } + + oaLaser2CurrentRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 112 } + + oaLaser2CurrentRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The laser no.1 current relative to the current at begin of life in steps of 0.1%." + ::= { oaMeasuringValuesEntry 113 } + + oaLaser2CurrentRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 114 } + + oaLaser2CurrentRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 115 } + +-- ***** + oaLaser2TecRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 116 } + + oaLaser2TecRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 117 } + + oaLaser2TecRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%." + ::= { oaMeasuringValuesEntry 118 } + + oaLaser2TecRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 119 } + + oaLaser2TecRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 120 } + +-- ***** + oaLaser2TemperatureLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 121 } + + oaLaser2TemperatureLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 122 } + + oaLaser2TemperatureValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 123 } + + oaLaser2TemperatureHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 124 } + + oaLaser2TemperatureHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 125 } + +-- ***** + oaLaser2VoltageLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 126 } + + oaLaser2VoltageLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 127 } + + oaLaser2VoltageValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 128 } + + oaLaser2VoltageHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 129 } + + oaLaser2VoltageHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 130 } + +-- #####+5 Space reserved for 1 additional laser measuring value with limits + +-- *********************************** + oaLaser3CurrentRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 136 } + + oaLaser3CurrentRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 137 } + + oaLaser3CurrentRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The laser no.1 current relative to the current at begin of life in steps of 0.1%." + ::= { oaMeasuringValuesEntry 138 } + + oaLaser3CurrentRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 139 } + + oaLaser3CurrentRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 140 } + +-- ***** + oaLaser3TecRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 141 } + + oaLaser3TecRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 142 } + + oaLaser3TecRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%." + ::= { oaMeasuringValuesEntry 143 } + + oaLaser3TecRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 144 } + + oaLaser3TecRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 145 } + +-- ***** + oaLaser3TemperatureLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 146 } + + oaLaser3TemperatureLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 147 } + + oaLaser3TemperatureValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 148 } + + oaLaser3TemperatureHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 149 } + + oaLaser3TemperatureHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 150 } + +-- ***** + oaLaser3VoltageLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 151 } + + oaLaser3VoltageLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 152 } + + oaLaser3VoltageValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 153 } + + oaLaser3VoltageHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 154 } + + oaLaser3VoltageHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 155 } + +-- #####+5 Space reserved for 1 additional laser measuring value with limits + +-- *********************************** + oaLaser4CurrentRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 161 } + + oaLaser4CurrentRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 162 } + + oaLaser4CurrentRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The laser no.1 current relative to the current at begin of life in steps of 0.1%." + ::= { oaMeasuringValuesEntry 163 } + + oaLaser4CurrentRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 164 } + + oaLaser4CurrentRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 165 } + +-- ***** + oaLaser4TecRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 166 } + + oaLaser4TecRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 167 } + + oaLaser4TecRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%." + ::= { oaMeasuringValuesEntry 168 } + + oaLaser4TecRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 169 } + + oaLaser4TecRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 170 } + +-- ***** + oaLaser4TemperatureLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 171 } + + oaLaser4TemperatureLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 172 } + + oaLaser4TemperatureValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 173 } + + oaLaser4TemperatureHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 174 } + + oaLaser4TemperatureHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 175 } + +-- ***** + oaLaser4VoltageLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 176 } + + oaLaser4VoltageLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 177 } + + oaLaser4VoltageValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 178 } + + oaLaser4VoltageHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 179 } + + oaLaser4VoltageHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 180 } + +-- #####+5 Space reserved for 1 additional laser measuring value with limits + +-- *********************************** + oaLaser5CurrentRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 186 } + + oaLaser5CurrentRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 187 } + + oaLaser5CurrentRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The laser no.1 current relative to the current at begin of life in steps of 0.1%." + ::= { oaMeasuringValuesEntry 188 } + + oaLaser5CurrentRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 189 } + + oaLaser5CurrentRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 190 } + +-- ***** + oaLaser5TecRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 191 } + + oaLaser5TecRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 192 } + + oaLaser5TecRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%." + ::= { oaMeasuringValuesEntry 193 } + + oaLaser5TecRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 194 } + + oaLaser5TecRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 195 } + +-- ***** + oaLaser5TemperatureLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 196 } + + oaLaser5TemperatureLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 197 } + + oaLaser5TemperatureValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 198 } + + oaLaser5TemperatureHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 199 } + + oaLaser5TemperatureHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 200 } + +-- ***** + oaLaser5VoltageLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 201 } + + oaLaser5VoltageLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 202 } + + oaLaser5VoltageValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 203 } + + oaLaser5VoltageHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 204 } + + oaLaser5VoltageHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 205 } + +-- #####+5 Space reserved for 1 additional laser measuring value with limits + +-- *********************************** + oaLaser6CurrentRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 211 } + + oaLaser6CurrentRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 212 } + + oaLaser6CurrentRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The laser no.1 current relative to the current at begin of life in steps of 0.1%." + ::= { oaMeasuringValuesEntry 213 } + + oaLaser6CurrentRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 214 } + + oaLaser6CurrentRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser no.1 current high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 215 } + +-- ***** + oaLaser6TecRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 216 } + + oaLaser6TecRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 217 } + + oaLaser6TecRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%." + ::= { oaMeasuringValuesEntry 218 } + + oaLaser6TecRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 219 } + + oaLaser6TecRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%." + ::= { oaMeasuringValuesEntry 220 } + +-- ***** + oaLaser6TemperatureLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 221 } + + oaLaser6TemperatureLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 222 } + + oaLaser6TemperatureValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 223 } + + oaLaser6TemperatureHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 224 } + + oaLaser6TemperatureHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees." + ::= { oaMeasuringValuesEntry 225 } + +-- ***** + oaLaser6VoltageLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 226 } + + oaLaser6VoltageLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 227 } + + oaLaser6VoltageValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 228 } + + oaLaser6VoltageHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 229 } + + oaLaser6VoltageHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION "The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts." + ::= { oaMeasuringValuesEntry 230 } + +-- #####+5 Space reserved for 1 additional laser measuring value with limits + + +--***************************************************************************************** +-- oaStates group + + oaStatesTable OBJECT-TYPE + SYNTAX SEQUENCE OF OaStatesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { oaStates 1 } + +-- table of states entry(ro/rw) + + oaStatesEntry OBJECT-TYPE + SYNTAX OaStatesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Alarms for a module." + INDEX { oaNESlot } + ::= { oaStatesTable 1 } + +-- the structure of the entry + + OaStatesEntry ::= SEQUENCE + { + oaStatesBootloader PerceivedSeverityValue, + oaStatesCommLoss PerceivedSeverityValue, + oaStatesInitializing PerceivedSeverityValue, + oaStatesLaserShutdown PerceivedSeverityValue, + oaStatesTemperatureLow PerceivedSeverityValue, + oaStatesTemperatureHigh PerceivedSeverityValue, + oaStatesSystem PerceivedSeverityValue, + oaStatesInputPwrLow PerceivedSeverityValue, + oaStatesInputPwrHigh PerceivedSeverityValue, + oaStatesOutputPwrOrGainLow PerceivedSeverityValue, + oaStatesOutputPwrOrGainHigh PerceivedSeverityValue, + oaStatesReturnLossLow PerceivedSeverityValue, + oaStatesReturnLossHigh PerceivedSeverityValue, + oaStatesRedundancySwitch PerceivedSeverityValue, + oaStatesInputVoltageLow PerceivedSeverityValue, + oaStatesInputVoltageHigh PerceivedSeverityValue, + -- ** Only for 19 inch devices with supply and fan units + oaStatesPowerSupplyLeft PerceivedSeverityValue, + oaStatesPowerSupplyRight PerceivedSeverityValue, + oaStatesFanLeft PerceivedSeverityValue, + oaStatesFanRight PerceivedSeverityValue, + -- ** Shared alarms for all internal voltages + oaStatesInternalVoltageLow PerceivedSeverityValue, + oaStatesInternalVoltageHigh PerceivedSeverityValue, + -- ** Shared alarms for all laser parameters + oaStatesLaserCurrentLow PerceivedSeverityValue, + oaStatesLaserCurrentHigh PerceivedSeverityValue, + oaStatesTecCurrentLow PerceivedSeverityValue, + oaStatesTecCurrentHigh PerceivedSeverityValue, + oaStatesLaserTempLow PerceivedSeverityValue, + oaStatesLaserTempHigh PerceivedSeverityValue, + oaStatesLaserVoltageLow PerceivedSeverityValue, + oaStatesLaserVoltageHigh PerceivedSeverityValue, + -- ** Only for amplifiers of raman type (see oaDisplayAmplifierIsRamanType) - + oaStatesRamanBackReflectionRatio PerceivedSeverityValue, + oaStatesRamanOscSignalMissing PerceivedSeverityValue + } + + oaStatesBootloader OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device is running in bootloader mode + without a legal application software." + ::= { oaStatesEntry 1 } + + oaStatesCommLoss OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The NEC has lost the connection to the device. + Reason may be a removed or defective device. + Note that this state is set by the NEC and not + by the device" + ::= { oaStatesEntry 2 } + + oaStatesInitializing OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The device is initializing" + ::= { oaStatesEntry 3 } + + oaStatesLaserShutdown OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Lasers are shutdown, no optical output" + ::= { oaStatesEntry 4 } + + oaStatesTemperatureLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Device internal temperature low" + ::= { oaStatesEntry 5 } + + oaStatesTemperatureHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Device internal temperature high" + ::= { oaStatesEntry 6 } + + oaStatesSystem OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Internal error occured" + ::= { oaStatesEntry 7 } + + oaStatesInputPwrLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Optical input power low" + ::= { oaStatesEntry 8 } + + oaStatesInputPwrHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Optical input power high" + ::= { oaStatesEntry 9 } + + oaStatesOutputPwrOrGainLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Optical output power (or gain) low" + ::= { oaStatesEntry 10 } + + oaStatesOutputPwrOrGainHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Optical output power (or gain) high" + ::= { oaStatesEntry 11 } + + oaStatesReturnLossLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Return loss low" + ::= { oaStatesEntry 12 } + + oaStatesReturnLossHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Return loss high" + ::= { oaStatesEntry 13 } + + oaStatesRedundancySwitch OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "This (redundant) device has been activated (redundancy switchover)" + ::= { oaStatesEntry 14 } + + oaStatesInputVoltageLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Input supply voltage low" + ::= { oaStatesEntry 15 } + + oaStatesInputVoltageHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Input supply voltage high" + ::= { oaStatesEntry 16 } + +-- #####+8 Space reserved for additional states + + oaStatesPowerSupplyLeft OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The left (looking from front) power supply unit fails. + Only valid for devices in 19 inch housing" + ::= { oaStatesEntry 25 } + + oaStatesPowerSupplyRight OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The right (looking from front) power supply unit fails. + Only valid for devices in 19 inch housing" + ::= { oaStatesEntry 26 } + + oaStatesFanLeft OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The left (looking from front) fan unit fails. + Only valid for devices in 19 inch housing" + ::= { oaStatesEntry 27 } + + oaStatesFanRight OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The right (looking from front) fan unit fails. + Only valid for devices in 19 inch housing" + ::= { oaStatesEntry 28 } + + oaStatesInternalVoltageLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "One (or more) internal voltages low" + ::= { oaStatesEntry 29 } + + oaStatesInternalVoltageHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "One (or more) internal voltages high" + ::= { oaStatesEntry 30 } + + oaStatesLaserCurrentLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser current of one (or more) lasers low" + ::= { oaStatesEntry 31 } + + oaStatesLaserCurrentHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser current of one (or more) lasers high (laser is aging)" + ::= { oaStatesEntry 32 } + + oaStatesTecCurrentLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser TEC current limit of one (or more) lasers reached (heating limit)" + ::= { oaStatesEntry 33 } + + oaStatesTecCurrentHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser TEC current limit of one (or more) lasers reached (cooling limit)" + ::= { oaStatesEntry 34 } + + oaStatesLaserTempLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser temperature of one (or more) lasers low" + ::= { oaStatesEntry 35 } + + oaStatesLaserTempHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser temperature of one (or more) lasers high" + ::= { oaStatesEntry 36 } + + oaStatesLaserVoltageLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser voltage supply of one (or more) lasers low" + ::= { oaStatesEntry 37 } + + oaStatesLaserVoltageHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser voltage supply of one (or more) lasers high" + ::= { oaStatesEntry 38 } + + oaStatesRamanBackReflectionRatio OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Raman amplifier back reflection ratio high alarm + Only used if oaDisplayAmplifierIsRamanType == true(1)" + ::= { oaStatesEntry 39 } + + oaStatesRamanOscSignalMissing OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Raman amplifier oscillator signal missing alarm + Only used if oaDisplayAmplifierIsRamanType == true(1)" + ::= { oaStatesEntry 40 } + +--***************************************************************************************** +-- oaControl group + + oaControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF OaControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { oaControl 1 } + +-- table of control entry(ro/rw) + + oaControlEntry OBJECT-TYPE + SYNTAX OaControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Alarms for a module." + INDEX { oaNESlot } + ::= { oaControlTable 1 } + +-- the structure of the entry + + OaControlEntry ::= SEQUENCE + { + oaControlLaserShutdown TruthValue, + oaControlReset TruthValue, + oaControlModuleLedBlink TruthValue, + oaControlSbsEvaluationStart TruthValue + } + + oaControlLaserShutdown OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-write + STATUS mandatory + DESCRIPTION "Shutdown the laser(s), optical power on/off." + ::= { oaControlEntry 1 } + + oaControlReset OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-write + STATUS mandatory + DESCRIPTION "Reset the module." + ::= { oaControlEntry 2 } + + oaControlModuleLedBlink OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-write + STATUS mandatory + DESCRIPTION "Writing this variable to true(1) lets the device's + modul LED blink green for 10 seconds. + Writing this variable to false(2) stops blinking at once. + This variable always returns false(2) on read requests" + ::= { oaControlEntry 3 } + + oaControlSbsEvaluationStart OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Setting to true(1) starts an SBS threshold evaluation process. + Always reads as false(2)" + ::={ oaControlEntry 4 } + + +--***************************************************************************************** +-- oaConfiguration group + + oaConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OaConfigurationEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { oaConfiguration 1 } + +-- table of configuration entry(ro/rw) + + oaConfigurationEntry OBJECT-TYPE + SYNTAX OaConfigurationEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + INDEX { oaNESlot } + ::= { oaConfigurationTable 1 } + +-- the structure of the entry + + OaConfigurationEntry ::= SEQUENCE + { + oaConfigNESlotWrite NESlotWriteValue, + oaConfigRegulationMode RegulationMode, + oaConfigOutputPwrOrGainAdjust INTEGER, + oaConfigModeExtIO ExtIOmode, + oaConfigMaskExtIO ExtIOmask, + oaConfigSbsEvaluationMode SbsEvaluationMode + } + + oaConfigNESlotWrite OBJECT-TYPE + SYNTAX NESlotWriteValue + ACCESS read-write + STATUS optional + DESCRIPTION "By writing this variable a slot can be assigned + for devices that dont support hardware slot detection. + Reading '-1' means that the slot position is NOT writable." + ::= { oaConfigurationEntry 1 } + + oaConfigRegulationMode OBJECT-TYPE + SYNTAX RegulationMode + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The regulation mode of the device. + - regModeConstantOutputPower(1): + If the device runs in constant output power mode, then all *OutputPwrOrGain* + variables are interpreted as 'Output Power' specific. + - regModeConstantGain(2): + If the device runs in constant gain mode, then all *OutputPwrOrGain* + variables are interpreted as 'Gain' specific." + ::={ oaConfigurationEntry 2 } + + oaConfigOutputPwrOrGainAdjust OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "This variable can be used to adjust the desired output power (or gain) + value in 0.1 dB units relative to its nominal level. + See oaConfigRegulationMode variable too" + ::={ oaConfigurationEntry 3 } + + oaConfigModeExtIO OBJECT-TYPE + SYNTAX ExtIOmode + ACCESS read-write + STATUS mandatory + DESCRIPTION "The mode and usage of the device's external IO port." + ::= { oaConfigurationEntry 4 } + + oaConfigMaskExtIO OBJECT-TYPE + SYNTAX ExtIOmask + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The alarm/warning mask that activates the device's external IO port." + ::= { oaConfigurationEntry 5 } + + oaConfigSbsEvaluationMode OBJECT-TYPE + SYNTAX SbsEvaluationMode + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The SBS threshold evaluation mode." + ::={ oaConfigurationEntry 6 } + +--***************************************************************************************** +-- Display group + + oaDisplayTable OBJECT-TYPE + SYNTAX SEQUENCE OF OaDisplayEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { oaDisplay 1 } + +-- table of configuration entry(ro/rw) + + oaDisplayEntry OBJECT-TYPE + SYNTAX OaDisplayEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + INDEX { oaNESlot } + ::= { oaDisplayTable 1 } + +-- the structure of the entry + + OaDisplayEntry ::= SEQUENCE + { + oaDisplayNumberOfLasers INTEGER, + oaDisplayNumberOfInternalVoltages INTEGER, + oaDisplayExtIOSupported TruthValue, + oaDisplaySbsSupported TruthValue, + oaDisplayReturnLossSupported TruthValue, + oaDisplaySbsEvaluatedThreshold INTEGER, + oaDisplaySbsLastEvaluationState SbsEvaluationState, + oaDisplaySbsLastEvaluationTime DisplayString, + oaDisplayOutputPwrOrGainNominal INTEGER, + oaDisplayOutputPwrOrGainAdjusted INTEGER, + oaDisplayInputVoltageNominal INTEGER, + oaDisplayInternalVoltage1Nominal INTEGER, + oaDisplayInternalVoltage2Nominal INTEGER, + oaDisplayInternalVoltage3Nominal INTEGER, + oaDisplayLaser1VoltageNominal INTEGER, + oaDisplayLaser2VoltageNominal INTEGER, + oaDisplayLaser3VoltageNominal INTEGER, + oaDisplayLaser4VoltageNominal INTEGER, + oaDisplayLaser5VoltageNominal INTEGER, + oaDisplayLaser6VoltageNominal INTEGER, + oaDisplayLaser1PumpPowerRel INTEGER, + oaDisplayLaser2PumpPowerRel INTEGER, + oaDisplayLaser3PumpPowerRel INTEGER, + oaDisplayLaser4PumpPowerRel INTEGER, + oaDisplayLaser5PumpPowerRel INTEGER, + oaDisplayLaser6PumpPowerRel INTEGER, + oaDisplayLaser1FeaturesSupported LaserFeatures, + oaDisplayLaser2FeaturesSupported LaserFeatures, + oaDisplayLaser3FeaturesSupported LaserFeatures, + oaDisplayLaser4FeaturesSupported LaserFeatures, + oaDisplayLaser5FeaturesSupported LaserFeatures, + oaDisplayLaser6FeaturesSupported LaserFeatures, + oaDisplayAmplifierIsRamanType TruthValue + } + + oaDisplayNumberOfLasers OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of lasers used by this optical amplifier" + ::={ oaDisplayEntry 1 } + + oaDisplayNumberOfInternalVoltages OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The number of internal voltages monitored by this optical amplifier" + ::={ oaDisplayEntry 2 } + + oaDisplayExtIOSupported OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Return 'true(1)' if external I/O feature is supported by the device." + ::= { oaDisplayEntry 3 } + + oaDisplaySbsSupported OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Return 'true(1)' if SBS feature is supported by the device." + ::= { oaDisplayEntry 4 } + + oaDisplayReturnLossSupported OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Return 'true(1)' if ReturnLoss feature is supported by the device." + ::= { oaDisplayEntry 5 } + + oaDisplaySbsEvaluatedThreshold OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The evaluated SBS output power or gain threshold in 0.1 dB(m) units. + Not supported by all optical amplifiers" + ::={ oaDisplayEntry 6 } + + oaDisplaySbsLastEvaluationState OBJECT-TYPE + SYNTAX SbsEvaluationState + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The result of last SBS threshold evaluation process. + Returns 'evaluationNotSupported(1)' if SBS threshold evaluation + is not supported by this optical amplifier" + ::={ oaDisplayEntry 7 } + + oaDisplaySbsLastEvaluationTime OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The time of last successfull SBS threshold evaluation process. + Not supported by all optical amplifiers" + ::={ oaDisplayEntry 8 } + + oaDisplayOutputPwrOrGainNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The nominal value of output power (or gain) in 0.1 dB(m) units. + See oaConfigRegulationMode variable too" + ::={ oaDisplayEntry 9 } + + oaDisplayOutputPwrOrGainAdjusted OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The adjusted desired value of output power (or gain) in 0.1 dB(m) units. + See oaConfigRegulationMode variable too" + ::={ oaDisplayEntry 10 } + + oaDisplayInputVoltageNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal value of input voltage in 0.1 V units." + ::={ oaDisplayEntry 11 } + + oaDisplayInternalVoltage1Nominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal value of internal voltage no. 1 in 0.1 V units." + ::={ oaDisplayEntry 12 } + + oaDisplayInternalVoltage2Nominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal value of internal voltage no. 2 in 0.1 V units." + ::={ oaDisplayEntry 13 } + + oaDisplayInternalVoltage3Nominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal value of internal voltage no. 3 in 0.1 V units." + ::={ oaDisplayEntry 14 } + +-- #####+5 Space reserved for 5 additional internal voltages + + oaDisplayLaser1VoltageNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal supply voltage of laser no.1 in 0.1 V units." + ::={ oaDisplayEntry 20 } + + oaDisplayLaser2VoltageNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal supply voltage of laser no.2 in 0.1 V units." + ::={ oaDisplayEntry 21 } + + oaDisplayLaser3VoltageNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal supply voltage of laser no.3 in 0.1 V units." + ::={ oaDisplayEntry 22 } + + oaDisplayLaser4VoltageNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal supply voltage of laser no.4 in 0.1 V units." + ::={ oaDisplayEntry 23 } + + oaDisplayLaser5VoltageNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal supply voltage of laser no.5 in 0.1 V units." + ::={ oaDisplayEntry 24 } + + oaDisplayLaser6VoltageNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS optional + DESCRIPTION + "The nominal supply voltage of laser no.6 in 0.1 V units." + ::={ oaDisplayEntry 25 } + +-- #####+4 Space reserved for 4 additional lasers + + oaDisplayLaser1PumpPowerRel OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The pump power of laser no.1 in steps of 0.1%" + ::={ oaDisplayEntry 30 } + + oaDisplayLaser2PumpPowerRel OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The pump power of laser no.2 in steps of 0.1%" + ::={ oaDisplayEntry 31 } + + oaDisplayLaser3PumpPowerRel OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The pump power of laser no.3 in steps of 0.1%" + ::={ oaDisplayEntry 32 } + + oaDisplayLaser4PumpPowerRel OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The pump power of laser no.4 in steps of 0.1%" + ::={ oaDisplayEntry 33 } + + oaDisplayLaser5PumpPowerRel OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The pump power of laser no.5 in steps of 0.1%" + ::={ oaDisplayEntry 34 } + + oaDisplayLaser6PumpPowerRel OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The pump power of laser no.6 in steps of 0.1%" + ::={ oaDisplayEntry 35 } + +-- #####+4 Space reserved for 4 additional lasers + + oaDisplayLaser1FeaturesSupported OBJECT-TYPE + SYNTAX LaserFeatures + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The features supported by laser no.1 + A bitfield containing the features supplied by this laser. + Note that laserCurrent is always supplied." + ::={ oaDisplayEntry 40 } + + oaDisplayLaser2FeaturesSupported OBJECT-TYPE + SYNTAX LaserFeatures + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The features supported by laser no.2" + ::={ oaDisplayEntry 41 } + + oaDisplayLaser3FeaturesSupported OBJECT-TYPE + SYNTAX LaserFeatures + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The features supported by laser no.3" + ::={ oaDisplayEntry 42 } + + oaDisplayLaser4FeaturesSupported OBJECT-TYPE + SYNTAX LaserFeatures + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The features supported by laser no.4" + ::={ oaDisplayEntry 43 } + + oaDisplayLaser5FeaturesSupported OBJECT-TYPE + SYNTAX LaserFeatures + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The features supported by laser no.5" + ::={ oaDisplayEntry 44 } + + oaDisplayLaser6FeaturesSupported OBJECT-TYPE + SYNTAX LaserFeatures + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The features supported by laser no.6" + ::={ oaDisplayEntry 45 } + +-- #####+4 Space reserved for 4 additional lasers + + oaDisplayAmplifierIsRamanType OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Returns true(1) if this amplifier is of RAMAN type" + ::={ oaDisplayEntry 50 } + + +--***************************************************************************************** +END |