diff options
Diffstat (limited to 'MIBS/bktel/BKTEL-HFC862-OVTX-V11-MIB')
| -rw-r--r-- | MIBS/bktel/BKTEL-HFC862-OVTX-V11-MIB | 2000 |
1 files changed, 2000 insertions, 0 deletions
diff --git a/MIBS/bktel/BKTEL-HFC862-OVTX-V11-MIB b/MIBS/bktel/BKTEL-HFC862-OVTX-V11-MIB new file mode 100644 index 0000000..1bf39a0 --- /dev/null +++ b/MIBS/bktel/BKTEL-HFC862-OVTX-V11-MIB @@ -0,0 +1,2000 @@ +--- **************************************************************************** +-- * +-- * Description: Implements definitions for the Ovtx-modul +-- * (External Modulated Optical Transmitters) +-- * +-- * Copyright 2003 by BKtel communications GmbH +-- * +-- * V.0.1 18.02.03 J. Anhorn first draft +-- * V.0.2 17.03.03 M. Heldmann ovtxStates group changed completely, more changes +-- * V.0.3 23.04.03 M. Heldmann ovtxDisplay group shrinked, removed J.Anhorns comments +-- * V.0.4 30.04.03 M. Heldmann ovtxControlReset, ovtxControlModuleLedBlink added +-- * V.0.5 05.05.03 M. Heldmann ovtxStatesLaserShutdown, ovtxStatesInitializing added +-- * V.0.6 23.07.03 M. Heldmann added descriptions for the states +-- * V.0.7 16.09.03 M. Heldmann adjusted description for the state ovtxStatesInputLow +-- * V.1.0 17.12.03 M. Heldmann added ovtxRfInputMin..ovtxRfInputMax +-- * ovtxStatesInputHigh, ovtxStatesRedundancySwitch +-- * ovtxConfigurationRfInputLimitLoLo..ovtxConfigurationMaskExtIO +-- * ovtxDisplayOmiNominal +-- * renamed ovtxControlLaserShutdown to ovtxControlLaserOutputMode and expanded it +-- * renamed ..ItuFrequency.. to ..LaserFrequency.. +-- * adjusted some descriptions +-- * V.1.1 27.02.04 M. Heldmann changed ExtIOmask parameter name from maskUnknown(3) to maskSpecial(3) +-- * V.1.2 01.09.04 M. Heldmann ovtxConfigurationSbsSuppression expanded to SBS on/off settings +-- * V.1.3 18.04.05 M. Heldmann ovtxConfigurationSbsSuppression changed description +-- * V.1.4 04.10.06 M. Heldmann NESlotWriteValue expanded due to new 2G6 platform needs +-- * V.2.0 14.01.08 M. Heldmann renamed threshold parameters in ovtxMeasuringValuesTable +-- * renamed ovtxStatesDefective -> ovtxStatesCommLoss +-- * some threshold parameters in ovtxMeasuringValuesTable made read-write +-- * parameters needed for new transmitter hardware with extended features: +-- * - ovtxConfigurationCsoRegulationMode, ovtxConfigurationSlope +-- * ovtxConfigurationFiberLength configuration parameters +-- * - ovtxDisplayRegulationState, ovtxDisplayExtendedCapabilities +-- * parameters needed for new transmitter hardware with SAT RF input: +-- * - ovtxSatRfInputValue, ovtxSatOmiMeasuredValue, +-- * ovtxSatRfGainMeasuredValue measuring values and their thresholds +-- * - ovtxStatesSatInputLow, ovtxStatesSatInputHigh. +-- * ovtxStatesSatOmiOrRfgainLow. ovtxStatesSatOmiOrRfgainHigh alarm states +-- * - ovtxConfigurationSatModeAGC, ovtxConfigurationSatOmi, ovtxConfigurationSatRfGain +-- * ovtxConfigurationSatSlope, ovtxConfigurationRfInputMode configuration parameters +-- * - ovtxDisplaySatOmiNominal, ovtxDisplayRfInputCapabilities +-- * V.2.1 26.06.09 M. Heldmann added ovtxConfigurationSatLnbSupply and ovtxDisplaySatLnbSupplySupported +-- * V.2.1b 14.05.10 M. Heldmann renamed ovtxConfigurationModeExtIO and ovtxConfigurationMaskExtIO +-- * to ovtxConfigurationRedundancyMode and ovtxConfigurationRedundancyMask +-- * V.2.2 27.04.12 M. Heldmann added ovtxStatesSatLnbShortCircuit, ovtxStatesSbs1Level, ovtxStatesSbs2Level +-- * ovtxStatesSbs1PllNotLocked ovtxStatesSbs2PllNotLocked +-- * ovtxConfigurationSbsSuppressionMode, +-- * ovtxDisplaySbsExtensionsSupported, ovtxDisplaySbsSuppressionModeSupported +-- * V.2.2b 03.12.12 M. Heldmann added ovtxStatesInternalAlarm +-- * V.2.2c 20.03.13 M. Heldmann changed ovtxConfigurationSbsSuppressionMode to ovtxConfigurationSbsSuppressionMode +-- * added ovtxConfigurationSbsFiberType, ovtxConfigurationSbsFiberLength and +-- * ovtxDisplaySbsFiberParametersSupported +-- * V.2.3 11.07.13 M. Heldmann adjusted syntax of "CommonEntry" to remove MIB compiler warnings +-- * V.2.4 05.09.14 M. Heldmann changed CommonModuleWidth and ConfigurationNESlotWrite STATUS to optional +-- **************************************************************************** + +BKTEL-HFC862-OVTX-V11-MIB DEFINITIONS ::= BEGIN + + IMPORTS + experimental, enterprises, TimeTicks, IpAddress, Counter + FROM RFC1155-SMI + OBJECT-TYPE + FROM RFC-1212 + TRAP-TYPE + FROM RFC-1215 + modules, DisplayString, TruthValue, PerceivedSeverityValue, NESlotValue, ModuleWidthValue + FROM BKTEL-HFC862-BASE-MIB + ; + + ovtx OBJECT IDENTIFIER ::= { modules 101 } + ovtxCommon OBJECT IDENTIFIER ::= { ovtx 1 } + ovtxStates OBJECT IDENTIFIER ::= { ovtx 2 } + ovtxConfiguration OBJECT IDENTIFIER ::= { ovtx 3 } + ovtxControl OBJECT IDENTIFIER ::= { ovtx 4 } + ovtxMeasuringValues OBJECT IDENTIFIER ::= { ovtx 5 } + ovtxDisplay OBJECT IDENTIFIER ::= { ovtx 6 } + + +-- +-- Type definitions +-- + + AGCmode ::= INTEGER + { + modeAgcOff(1), + modeUnmodulatedAgcOn(2), + modeModulatedAgcOn(3) + } + + SatAGCmode ::= INTEGER + { + satAgcOff(1), + satAgcOn(2) + } + + RedundancyMode ::= INTEGER + { + modeActiveLowOutput(1), + modeActiveHighOutput(2), + modeNominalMasterIrreversible(3), + modeNominalMasterFallback(4), + modeRedundantSlave(5) + } + + RedundancyMask ::= INTEGER + { + maskAlarmsOnly(1), + maskAlarmsAndWarnings(2), + maskSpecialAdjusted(3) -- This item is NOT writable !! + } + + LaserOutputMode ::= INTEGER + { + laserShutdown(1), + laserActive(2), + laserShutdownOnMaskedError(3) -- Automatic laser shutdown on RedundancyMask'ed error condition + } + + CsoRegulationMode ::= INTEGER + { + csoRegModeChannelControlled(1), + csoRegModePilotControlled(2) + } + + RegulationState ::= INTEGER + { + regulationStateUnknownOrNotSupported(1), + regulationStateOutputpowerBased(2), + regulationStateCsoBasedRough(3), + regulationStateCsoBasedFine(4), + regulationStatePilotBased(5) + } + + RfInputCapabilities ::= INTEGER + { + rfInputCatvOnlySupported(1), + rfInputSatOnlySupported(2), + rfInputCatvAndSatSupported(3) + } + + RfInputAlarmMode ::= INTEGER + { + alarmEnableAll(1), + alarmCatvEnableSatDisable(2), + alarmSatEnableCatvDisable(3) + } + + LnbSupplyValue ::= INTEGER + { + lnbSupplyOff(1), + lnbSupply14V(2), + lnbSupply18V(3), + lnbSupply14V_22kHz(4), + lnbSupply18V_22kHz(5) + } + + LnbSupplySupportedValue ::= INTEGER + { + notSupported(1), + lnbSupply14V18VSwitchSupported(2), + lnbSupply14V18VAnd22kHzSwitchSupported(3) + } + + SbsSuppressionModeValue ::= INTEGER + { + modeStandard(1), + modeCatvOnly(2) + } + + SbsFiberTypeValue ::= INTEGER + { + typeStandardFiber(1), + typeSbsOptimizedFiber(2) + } + + SbsFiberLengthValue ::= INTEGER + { + length10km(1), + length25km(2), + length40km(3), + length65km(4) + } + + + NESlotWriteValue ::= INTEGER (-1..99) + +--***************************************************************************************** +-- OVTX ( Optical Transmitter with design release V11 ) + +--***************************************************************************************** +-- ovtxCommon group + + ovtxCommonNumberOfModules OBJECT-TYPE + SYNTAX INTEGER(0..50) + ACCESS read-only + STATUS mandatory + DESCRIPTION "Number of modules in table." + ::= { ovtxCommon 1 } + + ovtxCommonTable OBJECT-TYPE + SYNTAX SEQUENCE OF OvtxCommonEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "The table contains all modules of the OVTX-type in the NE" + ::= { ovtxCommon 2 } + +-- table of states entry(ro/rw) + + ovtxCommonEntry OBJECT-TYPE + SYNTAX OvtxCommonEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Common-Values for a module." + INDEX { ovtxNESlot } + ::= { ovtxCommonTable 1 } + +-- the structure of the entry + + OvtxCommonEntry ::= SEQUENCE + { + ovtxNESlot NESlotValue, + ovtxCommonType DisplayString, + ovtxCommonDescr DisplayString, + ovtxCommonFirmwareId DisplayString, + ovtxCommonModuleWidth ModuleWidthValue + } + + ovtxNESlot OBJECT-TYPE + SYNTAX NESlotValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The slot number of the chassis for which this + entry contains management information. + Equal to: modOVTXv11UniqueID" + ::= { ovtxCommonEntry 1 } + + ovtxCommonType OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of physical module. modSlotEmpty indicates + an empty slot. A Value of modSlotUnknown indicates + that the type of module is unknown." + ::= { ovtxCommonEntry 2 } + + ovtxCommonDescr OBJECT-TYPE + SYNTAX DisplayString + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A textual description of the module. + If not available, this Value should be + set to a zero length string." + ::= { ovtxCommonEntry 3 } + + ovtxCommonFirmwareId OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + ACCESS read-only + STATUS mandatory + DESCRIPTION "The firmware Id of the module." + ::= { ovtxCommonEntry 4 } + + ovtxCommonModuleWidth OBJECT-TYPE + SYNTAX ModuleWidthValue + ACCESS read-only + STATUS optional + DESCRIPTION "The width of the module in multiples of slots (1, 2, ...)" + ::= { ovtxCommonEntry 5 } + +--***************************************************************************************** +-- ovtxMeasuringValues group + +-- table of measuring Values + + ovtxMeasuringValuesTable OBJECT-TYPE + SYNTAX SEQUENCE OF OvtxMeasuringValuesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { ovtxMeasuringValues 1 } + +-- table of measuring Values entry + + ovtxMeasuringValuesEntry OBJECT-TYPE + SYNTAX OvtxMeasuringValuesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Common-Values for a module." + INDEX { ovtxNESlot } + ::= { ovtxMeasuringValuesTable 1 } + +-- the structure of the entry + + OvtxMeasuringValuesEntry ::= SEQUENCE + { + ovtxOmiMeasuredLoLo INTEGER, + ovtxOmiMeasuredLo INTEGER, + ovtxOmiMeasuredValue INTEGER, + ovtxOmiMeasuredHi INTEGER, + ovtxOmiMeasuredHiHi INTEGER, + + ovtxRfGainMeasuredLoLo INTEGER, + ovtxRfGainMeasuredLo INTEGER, + ovtxRfGainMeasuredValue INTEGER, + ovtxRfGainMeasuredHi INTEGER, + ovtxRfGainMeasuredHiHi INTEGER, + + ovtxLaserCurrentRelLoLo INTEGER, + ovtxLaserCurrentRelLo INTEGER, + ovtxLaserCurrentRelValue INTEGER, + ovtxLaserCurrentRelHi INTEGER, + ovtxLaserCurrentRelHiHi INTEGER, + + ovtxTecCurrentRelLoLo INTEGER, + ovtxTecCurrentRelLo INTEGER, + ovtxTecCurrentRelValue INTEGER, + ovtxTecCurrentRelHi INTEGER, + ovtxTecCurrentRelHiHi INTEGER, + + ovtxOutputPowerLoLo INTEGER, + ovtxOutputPowerLo INTEGER, + ovtxOutputPowerValue INTEGER, + ovtxOutputPowerHi INTEGER, + ovtxOutputPowerHiHi INTEGER, + + ovtxPlus3p3VLoLo INTEGER, + ovtxPlus3p3VLo INTEGER, + ovtxPlus3p3VValue INTEGER, + ovtxPlus3p3VHi INTEGER, + ovtxPlus3p3VHiHi INTEGER, + + ovtxPlus5VLoLo INTEGER, + ovtxPlus5VLo INTEGER, + ovtxPlus5VValue INTEGER, + ovtxPlus5VHi INTEGER, + ovtxPlus5VHiHi INTEGER, + + ovtxPlus12VLoLo INTEGER, + ovtxPlus12VLo INTEGER, + ovtxPlus12VValue INTEGER, + ovtxPlus12VHi INTEGER, + ovtxPlus12VHiHi INTEGER, + + ovtxPlus24VLoLo INTEGER, + ovtxPlus24VLo INTEGER, + ovtxPlus24VValue INTEGER, + ovtxPlus24VHi INTEGER, + ovtxPlus24VHiHi INTEGER, + + ovtxMinus5VLoLo INTEGER, + ovtxMinus5VLo INTEGER, + ovtxMinus5VValue INTEGER, + ovtxMinus5VHi INTEGER, + ovtxMinus5VHiHi INTEGER, + + ovtxMinus12VLoLo INTEGER, + ovtxMinus12VLo INTEGER, + ovtxMinus12VValue INTEGER, + ovtxMinus12VHi INTEGER, + ovtxMinus12VHiHi INTEGER, + + ovtxTemperatureLoLo INTEGER, + ovtxTemperatureLo INTEGER, + ovtxTemperatureValue INTEGER, + ovtxTemperatureHi INTEGER, + ovtxTemperatureHiHi INTEGER, + + ovtxRfInputLoLo INTEGER, + ovtxRfInputLo INTEGER, + ovtxRfInputValue INTEGER, + ovtxRfInputHi INTEGER, + ovtxRfInputHiHi INTEGER, + + ovtxSatRfInputLoLo INTEGER, + ovtxSatRfInputLo INTEGER, + ovtxSatRfInputValue INTEGER, + ovtxSatRfInputHi INTEGER, + ovtxSatRfInputHiHi INTEGER, + + ovtxSatOmiMeasuredLoLo INTEGER, + ovtxSatOmiMeasuredLo INTEGER, + ovtxSatOmiMeasuredValue INTEGER, + ovtxSatOmiMeasuredHi INTEGER, + ovtxSatOmiMeasuredHiHi INTEGER, + + ovtxSatRfGainMeasuredLoLo INTEGER, + ovtxSatRfGainMeasuredLo INTEGER, + ovtxSatRfGainMeasuredValue INTEGER, + ovtxSatRfGainMeasuredHi INTEGER, + ovtxSatRfGainMeasuredHiHi INTEGER + } + +-- ***** + ovtxOmiMeasuredLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-OMI offset low alarm threshold in steps of 0.1dB (CATV input)." + ::= { ovtxMeasuringValuesEntry 1 } + + ovtxOmiMeasuredLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-OMI offset low warning threshold in steps of 0.1dB (CATV input)." + ::= { ovtxMeasuringValuesEntry 2 } + + ovtxOmiMeasuredValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The offset from nominal OMI in steps of 0.1dB (CATV input). + If AGC is on this parameter is equal to ovtxConfigurationOmi. + If AGC is off this paramters shows the Measured-OMI for the adjusted gain." + ::= { ovtxMeasuringValuesEntry 3 } + + ovtxOmiMeasuredHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-OMI offset high warning threshold in steps of 0.1dB (CATV input)." + ::= { ovtxMeasuringValuesEntry 4 } + + ovtxOmiMeasuredHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-OMI offset high alarm threshold in steps of 0.1dB (CATV input)." + ::= { ovtxMeasuringValuesEntry 5 } + +-- ***** + ovtxRfGainMeasuredLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-Rf-Gain offset low alarm threshold in steps of 0.1dB (CATV input)." + ::= { ovtxMeasuringValuesEntry 6 } + + ovtxRfGainMeasuredLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-Rf-Gain offset low warning threshold in steps of 0.1dB (CATV input)." + ::= { ovtxMeasuringValuesEntry 7 } + + ovtxRfGainMeasuredValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The offset from nominal gain in steps of 0.1dB (CATV input). + If AGC is off this parameter is equal to ovtxConfigurationRfGain. + If AGC is on this paramters shows the Measured-Rf-Gain for the adjusted omi." + ::= { ovtxMeasuringValuesEntry 8 } + + ovtxRfGainMeasuredHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-Rf-Gain offset high warning threshold in steps of 0.1dB (CATV input)." + ::= { ovtxMeasuringValuesEntry 9 } + + ovtxRfGainMeasuredHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-Rf-Gain offset high alarm threshold in steps of 0.1dB (CATV input)." + ::= { ovtxMeasuringValuesEntry 10 } + +-- ***** + ovtxLaserCurrentRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser current low alarm threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 11 } + + ovtxLaserCurrentRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser current low warning threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 12 } + + ovtxLaserCurrentRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The laser current relative to the current at begin of life in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 13 } + + ovtxLaserCurrentRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser current high warning threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 14 } + + ovtxLaserCurrentRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Relative laser current high alarm threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 15 } + +-- ***** + ovtxTecCurrentRelLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current low alarm threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 16 } + + ovtxTecCurrentRelLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current low warning threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 17 } + + ovtxTecCurrentRelValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The thermo-electric-cooler current relative to + its absolute high alarm threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 18 } + + ovtxTecCurrentRelHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current high warning threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 19 } + + ovtxTecCurrentRelHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Thermo-electric-cooler current high alarm threshold in steps of 0.1%." + ::= { ovtxMeasuringValuesEntry 20 } + +-- ***** + ovtxOutputPowerLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Output power low alarm threshold in steps of 0.1dBm." + ::= { ovtxMeasuringValuesEntry 21 } + + ovtxOutputPowerLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Output power low warning threshold in steps of 0.1dBm." + ::= { ovtxMeasuringValuesEntry 22 } + + ovtxOutputPowerValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "Output power in steps of 0.1dBm." + ::= { ovtxMeasuringValuesEntry 23 } + + ovtxOutputPowerHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Output power high warning threshold in steps of 0.1dBm." + ::= { ovtxMeasuringValuesEntry 24 } + + ovtxOutputPowerHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Output power high alarm threshold in steps of 0.1dBm." + ::= { ovtxMeasuringValuesEntry 25 } + +-- ***** + ovtxPlus3p3VLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +3.3V supply voltage low alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 26 } + + ovtxPlus3p3VLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +3.3V supply voltage low warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 27 } + + ovtxPlus3p3VValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +3.3V supply voltage in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 28 } + + ovtxPlus3p3VHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +3.3V supply voltage high warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 29 } + + ovtxPlus3p3VHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +3.3V supply voltage high alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 30 } + +-- ***** + ovtxPlus5VLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +5V supply voltage low alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 31 } + + ovtxPlus5VLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +5V supply voltage low warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 32 } + + ovtxPlus5VValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +5V supply voltage in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 33 } + + ovtxPlus5VHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +5V supply voltage high warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 34 } + + ovtxPlus5VHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +5V supply voltage high alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 35 } + +-- ***** + ovtxPlus12VLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +12V supply voltage low alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 36 } + + ovtxPlus12VLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +12V supply voltage low warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 37 } + + ovtxPlus12VValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +12V supply voltage in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 38 } + + ovtxPlus12VHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +12V supply voltage high warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 39 } + + ovtxPlus12VHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +12V supply voltage high alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 40 } + +-- ***** + ovtxPlus24VLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +24V supply voltage low alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 41 } + + ovtxPlus24VLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +24V supply voltage low warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 42 } + + ovtxPlus24VValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +24V supply voltage in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 43 } + + ovtxPlus24VHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +24V supply voltage high warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 44 } + + ovtxPlus24VHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The +24V supply voltage high alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 45 } + +-- ***** + ovtxMinus5VLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -5V supply voltage low alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 46 } + + ovtxMinus5VLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -5V supply voltage low warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 47 } + + ovtxMinus5VValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -5V supply voltage in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 48 } + + ovtxMinus5VHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -5V supply voltage high warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 49 } + + ovtxMinus5VHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -5V supply voltage high alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 50 } + +-- ***** + ovtxMinus12VLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -12V supply voltage low alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 51 } + + ovtxMinus12VLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -12V supply voltage low warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 52 } + + ovtxMinus12VValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -12V supply voltage in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 53 } + + ovtxMinus12VHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -12V supply voltage high warning threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 54 } + + ovtxMinus12VHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The -12V supply voltage high alarm threshold in steps of 0.1V." + ::= { ovtxMeasuringValuesEntry 55 } + +-- ***** + ovtxTemperatureLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature low alarm threshold in steps of 0.1 celsius degrees." + ::= { ovtxMeasuringValuesEntry 56 } + + ovtxTemperatureLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature low warning threshold in steps of 0.1 celsius degrees." + ::= { ovtxMeasuringValuesEntry 57 } + + ovtxTemperatureValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature in steps of 0.1 celsius degrees." + ::= { ovtxMeasuringValuesEntry 58 } + + ovtxTemperatureHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature high warning threshold in steps of 0.1 celsius degrees." + ::= { ovtxMeasuringValuesEntry 59 } + + ovtxTemperatureHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The module temperature high alarm threshold in steps of 0.1 celsius degrees." + ::= { ovtxMeasuringValuesEntry 60 } + +-- ***** + ovtxRfInputLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "RfInput (total rms) low alarm threshold in steps of 0.1 dBm (CATV input)." + ::= { ovtxMeasuringValuesEntry 61 } + + ovtxRfInputLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "RfInput (total rms) low warning threshold in steps of 0.1 dBm (CATV input)." + ::= { ovtxMeasuringValuesEntry 62 } + + ovtxRfInputValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "RfInput (total rms) in steps of 0.1 dBm (CATV input)." + ::= { ovtxMeasuringValuesEntry 63 } + + ovtxRfInputHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "RfInput (total rms) high warning threshold in steps of 0.1 dBm (CATV input)." + ::= { ovtxMeasuringValuesEntry 64 } + + ovtxRfInputHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "RfInput (total rms) high alarm threshold in steps of 0.1 dBm (CATV input)." + ::= { ovtxMeasuringValuesEntry 65 } + +-- ***** + ovtxSatRfInputLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "RfInput (total rms) low alarm threshold in steps of 0.1 dBm (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 66 } + + ovtxSatRfInputLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "RfInput (total rms) low warning threshold in steps of 0.1 dBm (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 67 } + + ovtxSatRfInputValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "RfInput (total rms) in steps of 0.1 dBm (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 68 } + + ovtxSatRfInputHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "RfInput (total rms) high warning threshold in steps of 0.1 dBm (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 69 } + + ovtxSatRfInputHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "RfInput (total rms) high alarm threshold in steps of 0.1 dBm (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 70 } + +-- ***** + ovtxSatOmiMeasuredLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-OMI offset low alarm threshold in steps of 0.1dB (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 71 } + + ovtxSatOmiMeasuredLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-OMI offset low warning threshold in steps of 0.1dB (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 72 } + + ovtxSatOmiMeasuredValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The offset from nominal OMI in steps of 0.1dB (SAT input). + If SAT AGC is on this parameter is equal to ovtxConfigurationSatOmi. + If SAT AGC is off this paramters shows the measured-OMI for the adjusted gain. + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 73 } + + ovtxSatOmiMeasuredHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-OMI offset high warning threshold in steps of 0.1dB (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 74 } + + ovtxSatOmiMeasuredHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-OMI offset high alarm threshold in steps of 0.1dB (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 75 } + +-- ***** + ovtxSatRfGainMeasuredLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-Rf-Gain offset low alarm threshold in steps of 0.1dB (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 76 } + + ovtxSatRfGainMeasuredLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-Rf-Gain offset low warning threshold in steps of 0.1dB (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 77 } + + ovtxSatRfGainMeasuredValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The offset from nominal gain in steps of 0.1dB (SAT input). + If AGC is off this parameter is equal to ovtxConfigurationSatRfGain. + If AGC is on this paramters shows the measured-Rf-Gain for the adjusted omi. + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 78 } + + ovtxSatRfGainMeasuredHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-Rf-Gain offset high warning threshold in steps of 0.1dB (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 79 } + + ovtxSatRfGainMeasuredHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "Measured-Rf-Gain offset high alarm threshold in steps of 0.1dB (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero." + ::= { ovtxMeasuringValuesEntry 80 } + + +--***************************************************************************************** +-- ovtxStates group + +-- Note: For every control OId there must be a correspondant alarm OId! + + ovtxStatesTable OBJECT-TYPE + SYNTAX SEQUENCE OF OvtxStatesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { ovtxStates 1 } + +-- table of states entry(ro/rw) + + ovtxStatesEntry OBJECT-TYPE + SYNTAX OvtxStatesEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Alarms for a module." + INDEX { ovtxNESlot } + ::= { ovtxStatesTable 1 } + +-- the structure of the entry + + OvtxStatesEntry ::= SEQUENCE + { + ovtxStatesOutputLow PerceivedSeverityValue, + ovtxStatesOutputHigh PerceivedSeverityValue, + ovtxStatesInputLow PerceivedSeverityValue, + ovtxStatesLaserAging PerceivedSeverityValue, + ovtxStatesTecHigh PerceivedSeverityValue, + ovtxStatesLaserTempLow PerceivedSeverityValue, + ovtxStatesLaserTempHigh PerceivedSeverityValue, + ovtxStatesOmiOrRfgainLow PerceivedSeverityValue, + ovtxStatesOmiOrRfgainHigh PerceivedSeverityValue, + ovtxStatesPowerSupplyLeft PerceivedSeverityValue, + ovtxStatesPowerSupplyRight PerceivedSeverityValue, + ovtxStatesFanLeft PerceivedSeverityValue, + ovtxStatesFanRight PerceivedSeverityValue, + ovtxStatesTemperatureLow PerceivedSeverityValue, + ovtxStatesTemperatureHigh PerceivedSeverityValue, + ovtxStatesPlus3p3VLow PerceivedSeverityValue, + ovtxStatesPlus3p3VHigh PerceivedSeverityValue, + ovtxStatesPlus5VLow PerceivedSeverityValue, + ovtxStatesPlus5VHigh PerceivedSeverityValue, + ovtxStatesPlus12VLow PerceivedSeverityValue, + ovtxStatesPlus12VHigh PerceivedSeverityValue, + ovtxStatesPlus24VLow PerceivedSeverityValue, + ovtxStatesPlus24VHigh PerceivedSeverityValue, + ovtxStatesMinus5VLow PerceivedSeverityValue, + ovtxStatesMinus5VHigh PerceivedSeverityValue, + ovtxStatesMinus12VLow PerceivedSeverityValue, + ovtxStatesMinus12VHigh PerceivedSeverityValue, + ovtxStatesLaserShutdown PerceivedSeverityValue, + ovtxStatesInitializing PerceivedSeverityValue, + ovtxStatesBootloader PerceivedSeverityValue, + ovtxStatesCommLoss PerceivedSeverityValue, + ovtxStatesInputHigh PerceivedSeverityValue, + ovtxStatesRedundancySwitch PerceivedSeverityValue, + ovtxStatesSatInputLow PerceivedSeverityValue, + ovtxStatesSatInputHigh PerceivedSeverityValue, + ovtxStatesSatOmiOrRfgainLow PerceivedSeverityValue, + ovtxStatesSatOmiOrRfgainHigh PerceivedSeverityValue, + ovtxStatesSatLnbShortCircuit PerceivedSeverityValue, + ovtxStatesSbs1Level PerceivedSeverityValue, + ovtxStatesSbs2Level PerceivedSeverityValue, + ovtxStatesSbs1PllNotLocked PerceivedSeverityValue, + ovtxStatesSbs2PllNotLocked PerceivedSeverityValue, + ovtxStatesInternalAlarm PerceivedSeverityValue + } + + ovtxStatesOutputLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Optical output power low" + ::= { ovtxStatesEntry 1 } + + ovtxStatesOutputHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Optical output power high" + ::= { ovtxStatesEntry 2 } + + ovtxStatesInputLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "RF input power low (CATV input)" + ::= { ovtxStatesEntry 3 } + + ovtxStatesLaserAging OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The laser is aging" + ::= { ovtxStatesEntry 4 } + + ovtxStatesTecHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser cooler limit reached" + ::= { ovtxStatesEntry 5 } + + ovtxStatesLaserTempLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser temperature low" + ::= { ovtxStatesEntry 6 } + + ovtxStatesLaserTempHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser temperature high" + ::= { ovtxStatesEntry 7 } + + ovtxStatesOmiOrRfgainLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Omi or rf-gain (depending on mode) low (CATV input)" + ::= { ovtxStatesEntry 8 } + + ovtxStatesOmiOrRfgainHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Omi or rf-gain (depending on mode) high (CATV input)" + ::= { ovtxStatesEntry 9 } + + ovtxStatesPowerSupplyLeft OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The left (looking from front) power supply unit fails" + ::= { ovtxStatesEntry 10 } + + ovtxStatesPowerSupplyRight OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The right (looking from front) power supply unit fails" + ::= { ovtxStatesEntry 11 } + + ovtxStatesFanLeft OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The left (looking from front) fan unit fails" + ::= { ovtxStatesEntry 12 } + + ovtxStatesFanRight OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The right (looking from front) fan unit fails" + ::= { ovtxStatesEntry 13 } + + ovtxStatesTemperatureLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Device internal temperature low" + ::= { ovtxStatesEntry 14 } + + ovtxStatesTemperatureHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Device internal temperature high" + ::= { ovtxStatesEntry 15 } + + ovtxStatesPlus3p3VLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "3.3 Volt supply low" + ::= { ovtxStatesEntry 16 } + + ovtxStatesPlus3p3VHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "3.3 Volt supply high" + ::= { ovtxStatesEntry 17 } + + ovtxStatesPlus5VLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "5 Volt supply low" + ::= { ovtxStatesEntry 18 } + + ovtxStatesPlus5VHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "5 Volt supply high" + ::= { ovtxStatesEntry 19 } + + ovtxStatesPlus12VLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "12 Volt supply low" + ::= { ovtxStatesEntry 20 } + + ovtxStatesPlus12VHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "12 Volt supply high" + ::= { ovtxStatesEntry 21 } + + ovtxStatesPlus24VLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "24 Volt supply low" + ::= { ovtxStatesEntry 22 } + + ovtxStatesPlus24VHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "24 Volt supply high" + ::= { ovtxStatesEntry 23 } + + ovtxStatesMinus5VLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "-5 Volt supply low" + ::= { ovtxStatesEntry 24 } + + ovtxStatesMinus5VHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "-5 Volt supply high" + ::= { ovtxStatesEntry 25 } + + ovtxStatesMinus12VLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "-12 Volt supply low" + ::= { ovtxStatesEntry 26 } + + ovtxStatesMinus12VHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "-12 Volt supply high" + ::= { ovtxStatesEntry 27 } + + ovtxStatesLaserShutdown OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Laser is shutdown, no optical output" + ::= { ovtxStatesEntry 28 } + + ovtxStatesInitializing OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "The device is initializing" + ::= { ovtxStatesEntry 29 } + + ovtxStatesBootloader OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The device is running in bootloader mode + without a legal application software." + ::= { ovtxStatesEntry 30 } + + ovtxStatesCommLoss OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The NEC has lost the connection to the device. + Reason may be a removed or defective device. + Note that this state is set by the NEC and not + by the device" + ::= { ovtxStatesEntry 31 } + + ovtxStatesInputHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "RF input power high (CATV input)" + ::= { ovtxStatesEntry 32 } + + ovtxStatesRedundancySwitch OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "This (redundant) device has been activated (redundancy switchover)" + ::= { ovtxStatesEntry 33 } + + ovtxStatesSatInputLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "RF input power low (SAT input) + Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 34 } + + ovtxStatesSatInputHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "RF input power high (SAT input) + Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 35 } + + ovtxStatesSatOmiOrRfgainLow OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Omi or rf-gain (depending on mode) low (SAT input) + Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 36 } + + ovtxStatesSatOmiOrRfgainHigh OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Omi or rf-gain (depending on mode) high (SAT input) + Only used if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 37 } + + ovtxStatesSatLnbShortCircuit OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Short-circuit at SAT LNB + Only used if ovtxDisplaySatLnbSupplySupported != notSupported(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 38 } + + ovtxStatesSbs1Level OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "SBS #1 level alarm + Only used if ovtxDisplaySbsExtensionsSupported == true(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 39 } + + ovtxStatesSbs2Level OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "SBS #2 level alarm + Only used if ovtxDisplaySbsExtensionsSupported == true(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 40 } + + ovtxStatesSbs1PllNotLocked OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "SBS #1 PLL not locked + Only used if ovtxDisplaySbsExtensionsSupported == true(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 41 } + + ovtxStatesSbs2PllNotLocked OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "SBS #2 PLL not locked + Only used if ovtxDisplaySbsExtensionsSupported == true(1), + otherwise always reports clear(5)." + ::= { ovtxStatesEntry 42 } + + ovtxStatesInternalAlarm OBJECT-TYPE + SYNTAX PerceivedSeverityValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Internal hardware failure" + ::= { ovtxStatesEntry 43 } + + +--***************************************************************************************** +-- ovtxControl group + + ovtxControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF OvtxControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { ovtxControl 1 } + +-- table of control entry(ro/rw) + + ovtxControlEntry OBJECT-TYPE + SYNTAX OvtxControlEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "Alarms for a module." + INDEX { ovtxNESlot } + ::= { ovtxControlTable 1 } + +-- the structure of the entry + + OvtxControlEntry ::= SEQUENCE + { + ovtxControlLaserOutputMode LaserOutputMode, + ovtxControlReset TruthValue, + ovtxControlModuleLedBlink TruthValue + } + + ovtxControlLaserOutputMode OBJECT-TYPE + SYNTAX LaserOutputMode + ACCESS read-write + STATUS mandatory + DESCRIPTION "The output mode of the laser. + NOTE: The error mask used for parameter 'laserShutdownOnMaskedError(3)' + is the same mask used for external IO port, 'ovtxConfigurationRedundancyMask'" + ::= { ovtxControlEntry 1 } + + ovtxControlReset OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-write + STATUS mandatory + DESCRIPTION "Reset the module." + ::= { ovtxControlEntry 2 } + + ovtxControlModuleLedBlink OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-write + STATUS mandatory + DESCRIPTION "Writing this variable to true(1) lets the device's + modul LED blink green for 10 seconds. + Writing this variable to false(2) stops blinking at once. + This variable always returns false(2) on read requests" + ::= { ovtxControlEntry 3 } + +--***************************************************************************************** +-- ovtxConfiguration group + + ovtxConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF OvtxConfigurationEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { ovtxConfiguration 1 } + +-- table of configuration entry(ro/rw) + + ovtxConfigurationEntry OBJECT-TYPE + SYNTAX OvtxConfigurationEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + INDEX { ovtxNESlot } + ::= { ovtxConfigurationTable 1 } + +-- the structure of the entry + + OvtxConfigurationEntry ::= SEQUENCE + { + ovtxConfigurationNESlotWrite NESlotWriteValue, + ovtxConfigurationModeAGC AGCmode, + ovtxConfigurationOmi INTEGER, + ovtxConfigurationRfGain INTEGER, + ovtxConfigurationSbsSuppression INTEGER, + ovtxConfigurationChannelDistance INTEGER, + ovtxConfigurationLaserFrequency INTEGER, + + ovtxConfigurationRfInputLimitLoLo INTEGER, + ovtxConfigurationRfInputLimitLo INTEGER, + ovtxConfigurationRfInputLimitHi INTEGER, + ovtxConfigurationRfInputLimitHiHi INTEGER, + + ovtxConfigurationRfGainMeasuredLimitLoLo INTEGER, + ovtxConfigurationRfGainMeasuredLimitLo INTEGER, + ovtxConfigurationRfGainMeasuredLimitHi INTEGER, + ovtxConfigurationRfGainMeasuredLimitHiHi INTEGER, + + ovtxConfigurationOmiMeasuredLimitLoLo INTEGER, + ovtxConfigurationOmiMeasuredLimitLo INTEGER, + ovtxConfigurationOmiMeasuredLimitHi INTEGER, + ovtxConfigurationOmiMeasuredLimitHiHi INTEGER, + + ovtxConfigurationOutputPwrLimitLoLo INTEGER, + ovtxConfigurationOutputPwrLimitLo INTEGER, + ovtxConfigurationOutputPwrLimitHi INTEGER, + ovtxConfigurationOutputPwrLimitHiHi INTEGER, + + ovtxConfigurationRedundancyMode RedundancyMode, + ovtxConfigurationRedundancyMask RedundancyMask, + + ovtxConfigurationCsoRegulationMode CsoRegulationMode, + ovtxConfigurationSlope INTEGER, + ovtxConfigurationFiberLength INTEGER, + + ovtxConfigurationSatModeAGC SatAGCmode, + ovtxConfigurationSatOmi INTEGER, + ovtxConfigurationSatRfGain INTEGER, + ovtxConfigurationSatSlope INTEGER, + ovtxConfigurationRfInputAlarmMode RfInputAlarmMode, + + ovtxConfigurationSatLnbSupply LnbSupplyValue, + + ovtxConfigurationSbsSuppressionMode SbsSuppressionModeValue, + ovtxConfigurationSbsFiberType SbsFiberTypeValue, + ovtxConfigurationSbsFiberLength SbsFiberLengthValue + } + + ovtxConfigurationNESlotWrite OBJECT-TYPE + SYNTAX NESlotWriteValue + ACCESS read-write + STATUS optional + DESCRIPTION "By writing this variable a slot can be assigned + for devices that dont support hardware slot detection. + Reading '-1' means that the slot position is NOT writable." + ::= { ovtxConfigurationEntry 1 } + + ovtxConfigurationModeAGC OBJECT-TYPE + SYNTAX AGCmode + ACCESS read-write + STATUS mandatory + DESCRIPTION "The AGC mode of the optical transmitter (CATV input)." + ::= { ovtxConfigurationEntry 2 } + + ovtxConfigurationOmi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "The desired offset from nominal OMI in 0.1dB units (CATV input). + This parameter is only used if AGC is on." + ::= { ovtxConfigurationEntry 3 } + + ovtxConfigurationRfGain OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "The desired offset from nominal gain in 0.1dB units (CATV input). + This parameter is only used if AGC is off." + ::= { ovtxConfigurationEntry 4 } + + ovtxConfigurationSbsSuppression OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The sbs suppression in 0.1dBm units." + ::= { ovtxConfigurationEntry 5 } + + ovtxConfigurationChannelDistance OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "The channel raster in MHz units." + ::= { ovtxConfigurationEntry 6 } + + ovtxConfigurationLaserFrequency OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "The laser frequency in GHz units." + ::= { ovtxConfigurationEntry 7 } + +-- ***** + ovtxConfigurationRfInputLimitLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The rf input power low alarm limit in 0.1 dBm units" + ::={ ovtxConfigurationEntry 8 } + + ovtxConfigurationRfInputLimitLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The rf input power low warning limit in 0.1 dBm units" + ::={ ovtxConfigurationEntry 9 } + + ovtxConfigurationRfInputLimitHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The rf input power high warning limit in 0.1 dBm units" + ::={ ovtxConfigurationEntry 10 } + + ovtxConfigurationRfInputLimitHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The rf input power high alarm limit in 0.1 dBm units" + ::={ ovtxConfigurationEntry 11 } + +-- ***** + ovtxConfigurationRfGainMeasuredLimitLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Measured-Rf-Gain offset low alarm limit in 0.1 dB units (in AGC ON mode)" + ::={ ovtxConfigurationEntry 12 } + + ovtxConfigurationRfGainMeasuredLimitLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Measured-Rf-Gain offset low warning limit in 0.1 dB units (in AGC ON mode)" + ::={ ovtxConfigurationEntry 13 } + + ovtxConfigurationRfGainMeasuredLimitHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Measured-Rf-Gain offset high warning limit in 0.1 dB units (in AGC ON mode)" + ::={ ovtxConfigurationEntry 14 } + + ovtxConfigurationRfGainMeasuredLimitHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Measured-Rf-Gain offset high alarm limit in 0.1 dB units (in AGC ON mode)" + ::={ ovtxConfigurationEntry 15 } + +-- ***** + ovtxConfigurationOmiMeasuredLimitLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Measured-OMI offset low alarm limit in 0.1 dB units (in AGC OFF mode)" + ::={ ovtxConfigurationEntry 16 } + + ovtxConfigurationOmiMeasuredLimitLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Measured-OMI offset low warning limit in 0.1 dB units(in AGC OFF mode)" + ::={ ovtxConfigurationEntry 17 } + + ovtxConfigurationOmiMeasuredLimitHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Measured-OMI offset high warning limit in 0.1 dB units(in AGC OFF mode)" + ::={ ovtxConfigurationEntry 18 } + + ovtxConfigurationOmiMeasuredLimitHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The Measured-OMI offset high alarm limit in 0.1 dB units(in AGC OFF mode)" + ::={ ovtxConfigurationEntry 19 } + +-- ***** + ovtxConfigurationOutputPwrLimitLoLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The output power low alarm limit in 0.1 dBm units" + ::={ ovtxConfigurationEntry 20 } + + ovtxConfigurationOutputPwrLimitLo OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The output power low warning limit in 0.1 dBm units" + ::={ ovtxConfigurationEntry 21 } + + ovtxConfigurationOutputPwrLimitHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The output power high warning limit in 0.1 dBm units" + ::={ ovtxConfigurationEntry 22 } + + ovtxConfigurationOutputPwrLimitHiHi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The output power high alarm limit in 0.1 dBm units" + ::={ ovtxConfigurationEntry 23 } + +-- ***** + ovtxConfigurationRedundancyMode OBJECT-TYPE + SYNTAX RedundancyMode + ACCESS read-write + STATUS mandatory + DESCRIPTION "The device's redundancy mode." + ::= { ovtxConfigurationEntry 24 } + + ovtxConfigurationRedundancyMask OBJECT-TYPE + SYNTAX RedundancyMask + ACCESS read-write + STATUS mandatory + DESCRIPTION "The device's redundancy mask setings." + ::= { ovtxConfigurationEntry 25 } + +-- ***** + ovtxConfigurationCsoRegulationMode OBJECT-TYPE + SYNTAX CsoRegulationMode + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired CSO regulation mode of the optical transmitter. + Only usable if ovtxDisplayExtendedCapabilities == true(1), + otherwise always reports csoRegModeChannelControlled(1)" + ::= { ovtxConfigurationEntry 26 } + + ovtxConfigurationSlope OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired slope in 0.1 dB units (CATV input). + Only usable if ovtxDisplayExtendedCapabilities == true(1), + otherwise always reports zero" + ::= { ovtxConfigurationEntry 27 } + + ovtxConfigurationFiberLength OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The optical fiber length in meter units. + Only usable if ovtxDisplayExtendedCapabilities == true(1), + otherwise always reports zero" + ::= { ovtxConfigurationEntry 28 } + + ovtxConfigurationSatModeAGC OBJECT-TYPE + SYNTAX SatAGCmode + ACCESS read-write + STATUS mandatory + DESCRIPTION "The AGC mode of the optical transmitter (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports satAgcOff(1)" + ::= { ovtxConfigurationEntry 29 } + + ovtxConfigurationSatOmi OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "The desired offset from nominal OMI in 0.1dB units (SAT input). + This parameter is only used if AGC is on. + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero" + ::= { ovtxConfigurationEntry 30 } + + ovtxConfigurationSatRfGain OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION "The desired offset from nominal gain in 0.1dB units (SAT input). + This parameter is only used if AGC is off. + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero" + ::= { ovtxConfigurationEntry 31 } + + ovtxConfigurationSatSlope OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired slope in 0.1 dB units (SAT input). + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero" + ::= { ovtxConfigurationEntry 32 } + + ovtxConfigurationRfInputAlarmMode OBJECT-TYPE + SYNTAX RfInputAlarmMode + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The RF input alarm mode (Can be used to disable alarms of unused RF inputs) + Only usable if ovtxDisplayRfInputCapabilities == rfInputCatvAndSatSupported(3), + otherwise always reports alarmEnableAll(1)" + ::= { ovtxConfigurationEntry 33 } + + ovtxConfigurationSatLnbSupply OBJECT-TYPE + SYNTAX LnbSupplyValue + ACCESS read-write + STATUS mandatory + DESCRIPTION + "SAT LNB supply control. + This feature is not supported by all transmitter devices, + see ovtxDisplaySatLnbSupplySupported" + ::= { ovtxConfigurationEntry 34 } + + ovtxConfigurationSbsSuppressionMode OBJECT-TYPE + SYNTAX SbsSuppressionModeValue + ACCESS read-write + STATUS mandatory + DESCRIPTION + "SBS suppression mode. + This feature is not supported by all transmitter devices, + see ovtxDisplaySbsSuppressionModeSupported" + ::= { ovtxConfigurationEntry 35 } + + ovtxConfigurationSbsFiberType OBJECT-TYPE + SYNTAX SbsFiberTypeValue + ACCESS read-write + STATUS mandatory + DESCRIPTION + "SBS fiber type. + This feature is not supported by all transmitter devices, + see ovtxDisplaySbsFiberParametersSupported" + ::= { ovtxConfigurationEntry 36 } + + ovtxConfigurationSbsFiberLength OBJECT-TYPE + SYNTAX SbsFiberLengthValue + ACCESS read-write + STATUS mandatory + DESCRIPTION + "SBS suppression mode. + This feature is not supported by all transmitter devices, + see ovtxDisplaySbsFiberParametersSupported" + ::= { ovtxConfigurationEntry 37 } + + +--***************************************************************************************** +-- Display group + + ovtxDisplayTable OBJECT-TYPE + SYNTAX SEQUENCE OF OvtxDisplayEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + ::= { ovtxDisplay 1 } + +-- table of configuration entry(ro/rw) + + ovtxDisplayEntry OBJECT-TYPE + SYNTAX OvtxDisplayEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION "" + INDEX { ovtxNESlot } + ::= { ovtxDisplayTable 1 } + +-- the structure of the entry + + OvtxDisplayEntry ::= SEQUENCE + { + ovtxDisplayRfInputValue INTEGER, + ovtxDisplayLaserFrequencyMin INTEGER, + ovtxDisplayLaserFrequencyMax INTEGER, + ovtxDisplayLaserFrequencyStep INTEGER, + ovtxDisplayOmiNominal INTEGER, + ovtxDisplaySatOmiNominal INTEGER, + ovtxDisplayRegulationState RegulationState, + ovtxDisplayExtendedCapabilities TruthValue, + ovtxDisplayRfInputCapabilities RfInputCapabilities, + ovtxDisplaySatLnbSupplySupported LnbSupplySupportedValue, + ovtxDisplaySbsExtensionsSupported TruthValue, + ovtxDisplaySbsSuppressionModeSupported TruthValue, + ovtxDisplaySbsFiberParametersSupported TruthValue + } + + ovtxDisplayRfInputValue OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "RfInput (total rms) in steps of 0.1 dBm." + ::= { ovtxDisplayEntry 1 } + +-- ***** + ovtxDisplayLaserFrequencyMin OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The minimum adjustable laser frequency in GHz units." + ::={ ovtxDisplayEntry 2 } + + ovtxDisplayLaserFrequencyMax OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The maximum adjustable laser frequency in GHz units." + ::={ ovtxDisplayEntry 3 } + + ovtxDisplayLaserFrequencyStep OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The supported laser frequency stepsize in GHz units." + ::={ ovtxDisplayEntry 4 } + +-- ***** + ovtxDisplayOmiNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The nominal OMI in 0.1 percent units (CATV input)" + ::={ ovtxDisplayEntry 5 } + +-- ***** + ovtxDisplaySatOmiNominal OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION "The nominal OMI in 0.1 percent units (SAT input) + Only usable if ovtxDisplayRfInputCapabilities != rfInputCatvOnlySupported(1), + otherwise always reports zero" + ::={ ovtxDisplayEntry 6 } + + ovtxDisplayRegulationState OBJECT-TYPE + SYNTAX RegulationState + ACCESS read-only + STATUS mandatory + DESCRIPTION "The transmitters current regulation state + Only usable if ovtxDisplayExtendedCapabilities == true(1), + otherwise always reports regulationStateUnknownOrNotSupported(1)" + ::={ ovtxDisplayEntry 7 } + + ovtxDisplayExtendedCapabilities OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Returns true(1) if the transmitter supports the extended features + represented by the variables ovtxConfigurationCsoRegulationMode, + ovtxConfigurationSlope and ovtxConfigurationFiberLength" + ::={ ovtxDisplayEntry 8 } + + ovtxDisplayRfInputCapabilities OBJECT-TYPE + SYNTAX RfInputCapabilities + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Returns the transmitter supported RF input capabilities" + ::={ ovtxDisplayEntry 9 } + + ovtxDisplaySatLnbSupplySupported OBJECT-TYPE + SYNTAX LnbSupplySupportedValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Returns the supported SAT LNB supply features" + ::={ ovtxDisplayEntry 10 } + +-- ***** + ovtxDisplaySbsExtensionsSupported OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Returns true(1) if the transmitter supports the extended SBS alarm features" + ::={ ovtxDisplayEntry 11 } + + ovtxDisplaySbsSuppressionModeSupported OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Returns true(1) if the transmitter supports the SbsSuppressionMode configuration feature" + ::={ ovtxDisplayEntry 12 } + + ovtxDisplaySbsFiberParametersSupported OBJECT-TYPE + SYNTAX TruthValue + ACCESS read-only + STATUS mandatory + DESCRIPTION "Returns true(1) if the transmitter supports the SbsFiber configuration feature" + ::={ ovtxDisplayEntry 13 } + + +END |