diff options
Diffstat (limited to 'MIBS/brocade/BROCADE-VCS-MIB')
| -rw-r--r-- | MIBS/brocade/BROCADE-VCS-MIB | 352 |
1 files changed, 352 insertions, 0 deletions
diff --git a/MIBS/brocade/BROCADE-VCS-MIB b/MIBS/brocade/BROCADE-VCS-MIB new file mode 100644 index 0000000..89f63c3 --- /dev/null +++ b/MIBS/brocade/BROCADE-VCS-MIB @@ -0,0 +1,352 @@ + BROCADE-VCS-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, Gauge32, + Counter32, Unsigned32 FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + TruthValue, TEXTUAL-CONVENTION, + DisplayString FROM SNMPv2-TC + InetAddress, InetAddressType FROM INET-ADDRESS-MIB + FcWwn FROM Brocade-TC + bcsiModules FROM Brocade-REG-MIB; + + brocadeVcsMIB MODULE-IDENTITY + LAST-UPDATED "201504080000Z" + ORGANIZATION + "Brocade Communications Systems Inc." + CONTACT-INFO + "130 Holger Way, + San Jose, CA + 95134 USA. + + Phone: +1-408-333-8000 + Email: vivekk@brocade.com" + DESCRIPTION + "The MIB module for the monitoring of VCS fabrics. VCS + fabrics is a proprietary technology of Brocade. + + A VCS fabric consists of a set of inter-connected + Brocade VDX switches. These set of switches together + behave like a single L2 switch to the outside world. + The cluster can operate in 2 modes: fabric mode and + Logical chassis mode. + In fabric mode, the switches together behave like a + single L2 switch - but configuration on each switch + is independent of the other. + In logical chassis mode, one switch in the fabric is + elected as the principal switch. All configurations + need to be done only from the principal switch. + This is synced across to all the switches in the fabric. + Thus the configuration information is the same on all + the switches." + + REVISION "201504080000Z" + DESCRIPTION + "Initial version." + ::= { bcsiModules 6 } + + brocadeVcsMIBObjects OBJECT IDENTIFIER ::= { brocadeVcsMIB 1 } + brocadeVcsMIBConformance OBJECT IDENTIFIER ::= { brocadeVcsMIB 2 } + + VcsConfigMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The configuration mode that is in effect in the VCS + fabric. + local(1) - configuration is local to the switch. + distributed(2) - configuration is to be done from the + principal switch and will be the same + across all the switches in the fabric." + SYNTAX INTEGER { + local(1), + distributed(2) + } + + VcsOperationMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The operational mode of the fabric. + fabricCluster(1) - the entire set of switches in the + cluster behaves like a single L2 + switch to the outer world. However, + configuration is local to each switch. + logicalChassis(2) - in this case the fabric behaves + like a single L2 switch and the + configuration is driven from the + principal switch and is the same + across all switches in the fabric." + SYNTAX INTEGER { + fabricCluster(1), + logicalChassis(2) + } + + VcsIdentifier ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A number that uniquely identifies a fabric. Two different + fabrics would have different identifiers." + SYNTAX Unsigned32 (1 .. 8192) + + VcsRbridgeId ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A number that uniquely identifies a switch within a fabric." + SYNTAX Unsigned32 (1 .. 239) + + VcsClusterCondition ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The state of the fabric as a whole. + good(1) - indicates that all switches are in good + condition and cluster is fine. + degraded(2) - indicates that one or more switches are + offline and cluster has degraded. + error(3) - Internal error state." + SYNTAX INTEGER { + good(1), + degraded(2), + error(3) + } + + vcsConfigMode OBJECT-TYPE + SYNTAX VcsConfigMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The configuration mode of this cluster that is in effect." + ::= { brocadeVcsMIBObjects 1 } + + vcsModeOfOperation OBJECT-TYPE + SYNTAX VcsOperationMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational mode of this cluster." + ::= { brocadeVcsMIBObjects 2 } + + vcsIdentifier OBJECT-TYPE + SYNTAX VcsIdentifier + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unique identifier of this cluster." + ::= { brocadeVcsMIBObjects 3 } + + vcsVirtualIpV4Address OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The virtual IPv4 address of the cluster. Management + stations can use this address to send requests." + ::= { brocadeVcsMIBObjects 4 } + + vcsVirtualIpV6Address OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The virtual IPv6 address of the cluster. Management + stations can use this address to send requests." + ::= { brocadeVcsMIBObjects 5 } + + vcsVirtualIpAssociatedRbridgeId OBJECT-TYPE + SYNTAX VcsRbridgeId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The rbridge-id of the switch that hosts the virtual IP + address." + ::= { brocadeVcsMIBObjects 6 } + + vcsVirtualIpInterfaceId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The interface Id that is configured in the case of + inband configuration. If it is not inband configuration, + then this object will contain the value 0." + ::= { brocadeVcsMIBObjects 7 } + + vcsVirtualIpV4OperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational status of the virtual IPv4 address." + ::= { brocadeVcsMIBObjects 8 } + + vcsVirtualIpV6OperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational status of the virtual IPv6 address." + ::= { brocadeVcsMIBObjects 9 } + + vcsNumNodesInCluster OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of switches in the cluster that are currently + online." + ::= { brocadeVcsMIBObjects 10 } + + vcsClusterCondition OBJECT-TYPE + SYNTAX VcsClusterCondition + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The condition of the cluster as a whole." + ::= { brocadeVcsMIBObjects 11 } + + vcsFabricIslTable OBJECT-TYPE + SYNTAX SEQUENCE OF VcsFabricIslEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all the ISLs (Inter Switch Link) on + the local device." + + ::= { brocadeVcsMIBObjects 12 } + + vcsFabricIslEntry OBJECT-TYPE + SYNTAX VcsFabricIslEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Represents a single Inter Switch Link (ISL) on this + switch." + INDEX { vcsFabricIslIndex } + ::= { vcsFabricIslTable 1 } + + VcsFabricIslEntry ::= SEQUENCE { + vcsFabricIslIndex Unsigned32, + vcsFabricIslIntfName DisplayString, + vcsFabricIslNbrIntfName DisplayString, + vcsFabricIslNbrWWN FcWwn, + vcsFabricIslNbrName DisplayString, + vcsFabricIslBW Unsigned32, + vcsFabricIslIsTrunk TruthValue + } + + vcsFabricIslIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique id to distinguish this ISL from others on the + local device." + ::= { vcsFabricIslEntry 1 } + + vcsFabricIslIntfName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The interface name (ifName) of the interface on which + the ISL is formed on this switch." + ::= { vcsFabricIslEntry 2 } + + vcsFabricIslNbrIntfName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The interface name (ifName) of the interface on the + neighboring switch for this ISL." + ::= { vcsFabricIslEntry 3 } + + vcsFabricIslNbrWWN OBJECT-TYPE + SYNTAX FcWwn + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The World Wide Name (WWN) of the neighboring switch + for this ISL." + ::= { vcsFabricIslEntry 4 } + + vcsFabricIslNbrName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the neighboring switch on which this ISL + is formed." + ::= { vcsFabricIslEntry 5 } + + vcsFabricIslBW OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "megabytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The band-width of this ISL." + ::= { vcsFabricIslEntry 6 } + + vcsFabricIslIsTrunk OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication whether this ISL is a trunk interface. + A value of true(1) means it is a trunk. + A value of false(2) means it is not a trunk." + ::= { vcsFabricIslEntry 7 } + + -- Conformance information + + brocadeVcsConformanceGroups + OBJECT IDENTIFIER ::= { brocadeVcsMIBConformance 1 } + + brocadeVcsCompliances + OBJECT IDENTIFIER ::= { brocadeVcsMIBConformance 2 } + + -- Compliance statements + + brocadeVcsCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance information for this MIB." + MODULE -- this module + MANDATORY-GROUPS { brocadeVcsObjectsGroup } + + ::= { brocadeVcsCompliances 1 } + + -- units of conformance + + brocadeVcsObjectsGroup OBJECT-GROUP + OBJECTS { vcsConfigMode, + vcsModeOfOperation, + vcsIdentifier, + vcsVirtualIpV4Address, + vcsVirtualIpV6Address, + vcsVirtualIpAssociatedRbridgeId, + vcsVirtualIpInterfaceId, + vcsVirtualIpV4OperStatus, + vcsVirtualIpV6OperStatus, + vcsNumNodesInCluster, + vcsClusterCondition, + vcsFabricIslIndex, + vcsFabricIslIntfName, + vcsFabricIslNbrIntfName, + vcsFabricIslNbrWWN, + vcsFabricIslNbrName, + vcsFabricIslBW, + vcsFabricIslIsTrunk + } + STATUS current + DESCRIPTION + "The MIB objects related to VCS monitoring." + ::= { brocadeVcsConformanceGroups 1 } + + END |