diff options
Diffstat (limited to 'MIBS/cambium/cnmatrix/LLDP-EXT-MED-CAMBIUM-MIB')
| -rw-r--r-- | MIBS/cambium/cnmatrix/LLDP-EXT-MED-CAMBIUM-MIB | 1678 |
1 files changed, 1678 insertions, 0 deletions
diff --git a/MIBS/cambium/cnmatrix/LLDP-EXT-MED-CAMBIUM-MIB b/MIBS/cambium/cnmatrix/LLDP-EXT-MED-CAMBIUM-MIB new file mode 100644 index 0000000..18ce714 --- /dev/null +++ b/MIBS/cambium/cnmatrix/LLDP-EXT-MED-CAMBIUM-MIB @@ -0,0 +1,1678 @@ +LLDP-EXT-MED-CAMBIUM-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Unsigned32, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, TruthValue + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + lldpExtensions, lldpLocPortNum, + lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex, + lldpPortConfigEntry, lldpRemChassisIdSubtype, lldpRemChassisId + FROM LLDP-MIB + Dscp + FROM DIFFSERV-DSCP-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB; + +lldpXMedMIB MODULE-IDENTITY + LAST-UPDATED "200507280000Z" -- July 28th, 2005 + ORGANIZATION "TIA TR41.4 Working Group" + CONTACT-INFO +" WG-URL: http://www.tiaonline.org/standards/sfg/scope.cfm#TR-41.4 + WG-EMail: tr41@tiacomm.org + Contact: Chair, TIA TR-41 + Postal: Telecommunications Industry Association + 2500 Wilson Blvd., Suite 300 + Arlington, VA 22201 USA + Tel: (703) 907-7700 + E-mail: tr41@tiacomm.org" + DESCRIPTION + "The LLDP Management Information Base extension module for + TIA-TR41.4 media endpoint discovery information. + + In order to assure the uniqueness of the LLDP-MIB, + lldpXMedMIB is branched from lldpExtensions using the TIA OUI + value as the node. An OUI/'company_id' is a 24 bit globally + unique assigned number referenced by various standards. + + Copyright (C) TIA (2005). This version of this MIB module + is published as Section 13.3 of ANSI/TIA-1057. + + See the standard itself for full legal notices." + REVISION "200507280000Z" -- July 28th, 2005 + DESCRIPTION + "Published as part of ANSI/TIA-1057." + ::= { lldpExtensions 4795 } +-- editor note: replace xxxxx with real number at standard publication + +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ +-- +-- LLDP-MED Information +-- +------------------------------------------------------------------------------ +------------------------------------------------------------------------------ + +lldpXMedNotifications OBJECT IDENTIFIER ::= { lldpXMedMIB 0 } +lldpXMedObjects OBJECT IDENTIFIER ::= { lldpXMedMIB 1 } + + +-- LLDP MED extension MIB groups + +lldpXMedConfig OBJECT IDENTIFIER ::= { lldpXMedObjects 1 } +lldpXMedLocalData OBJECT IDENTIFIER ::= { lldpXMedObjects 2 } +lldpXMedRemoteData OBJECT IDENTIFIER ::= { lldpXMedObjects 3 } + +-- textual conventions + +LldpXMedDeviceClass ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Device Class to which the device is a member. + + A value of notDefined(0) indicates that the device + has capabilities not covered by any of the LLDP-MED classes. + + A value of endpointClass1(1) indicates that the device + has endpoint class 1 capabilities. + + A value of endpointClass2(2) indicates that the device + has endpoint class 2 capabilities. + + A value of endpointClass3(3) indicates that the device + has endpoint class 3 capabilities. + + A value of networkConnectivity(4) indicates that the device + has network connectivity device capabilities. + " + + SYNTAX INTEGER { + notDefined(0), + endpointClass1(1), + endpointClass2(2), + endpointClass3(3), + networkConnectivity(4) + } + +-- LLDP-MED Capabilities TC + +LldpXMedCapabilities ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Bitmap that includes the MED organizationally defined set of LLDP + TLVs the device is capable of and whose transmission is allowed on + the local LLDP agent by network management. + + Each bit in the bitmap corresponds to an LLDP-MED subtype associated + with a specific TIA TR41.4 MED TLV. + + Having the bit 'capabilities(0)' set indicates that the LLDP + agent refers to the Capabilities TLVs. + + Having the bit 'networkPolicy(1)' set indicates that the LLDP + agent refers to the Network Policy TLVs. + + Having the bit 'location(2)' set indicates that + the LLDP agent refers to the Emergency Communications + System Location TLVs. + + Having the bit 'extendedPSE(3)' set indicates that + the LLDP agent refers to the Extended PoE TLVs with PSE + capabilities. + + Having the bit 'extendedPD(4)' set indicates that + the LLDP agent refers to the Extended PoE TLVs with PD + capabilities. + + Having the bit 'inventory(5)' set indicates that + the LLDP agent refers to the Hardware Revision, Firmware + Revision, Software Revision, Serial Number, Manufacturer Name, + Model Name, and Asset ID TLVs." + + SYNTAX BITS { + capabilities(0), + networkPolicy(1), + location(2), + extendedPSE(3), + extendedPD(4), + inventory(5) + } + + +-- Location Subtype Textual Convention + +LocationSubtype ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The location subtype advertised by the remote endpoint. + + A value coordinateBased(2) indicates that the location subtype + advertised by the endpoint is defined to use the relevant sub- + fields of the DHCP option for Coordinate LCI as specified in + ANSI/TIA-1057, Section 10.2.4.3.1. + + A value civicAddress(3) indicates that the location subtype + advertised by the endpoint is defined to use the relevant sub- + fields of the DHCP option for Civic Address as specified in + ANSI/TIA-1057, Section 10.2.4.3.2. + + A value elin(4) indicates that the location subtype + advertised by the endpoint is defined to use the Emergency + Location Information Number (ELIN) as specified in + ANSI/TIA-1057, Section 10.2.4.3.3." + SYNTAX INTEGER { + unknown(1), + coordinateBased(2), + civicAddress(3), + elin(4) + } + +-- Policy Application Type Textual Convention + +PolicyAppType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The media type that defines the primary function of the + application for the policy advertised by an endpoint. + + Having the bit voice(1) set indicates that the media type defining + a primary function of the application for the policy advertised on + the local port is voice. + + Having the bit voiceSignaling(3) set indicates that the media type + defining a primary function of the application for the policy + advertised on the local port is voice signaling. + + Having the bit guestVoice(4) set indicates that the media type + Defining a primary function of the application for the policy + advertised on the local port is guest voice. + + Having the bit guestVoiceSignaling(5) set indicates that the media + type defining a primary function of the application for the policy + advertised on the local port is guest voice signaling. + + Having the bit softPhoneVoice(6) set indicates that the media type + Defining a primary function of the application for the policy + advertised on the local port is softphone voice. + + Having the bit videoConferencing(7) set indicates that the media + type defining a primary function of the application for the policy + advertised on the local port is voice. + + Having the bit streamingVideo(8) set indicates that the media type + defining a primary function of the application for the policy + advertised on the local port is streaming video. + + Having the bit videoSignaling(2) set indicates that the media type + defining a primary function of the application for the policy + advertised on the local port is video signaling." + SYNTAX BITS { + unknown(0), + voice(1), + voiceSignaling(2), + guestVoice(3), + guestVoiceSignaling(4), + softPhoneVoice(5), + videoconferencing(6), + streamingVideo(7), + videoSignaling(8) + } + + +------------------------------------------------------------------------------ +-- MED - Configuration +------------------------------------------------------------------------------ + +lldpXMedLocDeviceClass OBJECT-TYPE + SYNTAX LldpXMedDeviceClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Local Device Class." + REFERENCE + " ANSI/TIA-1057, Section 10.2.2.2" + ::= { lldpXMedConfig 1 } + + +lldpXMedPortConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedPortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that controls selection of LLDP TLVs to be transmitted + on individual ports." + ::= { lldpXMedConfig 2 } + +lldpXMedPortConfigEntry OBJECT-TYPE + SYNTAX LldpXMedPortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "LLDP configuration information that controls the + transmission of the MED organizationally defined TLVs on + LLDP transmission capable ports. + + This configuration object augments the lldpPortConfigEntry of + the LLDP-MIB, therefore it is only present along with the port + configuration defined by the associated lldpPortConfigEntry + entry. + + Each active lldpXMedPortConfigEntry must be stored and + retrieved from non-volatile storage (along with the + corresponding lldpPortConfigEntry) after a re-initialization + of the management system." + AUGMENTS { lldpPortConfigEntry } + ::= { lldpXMedPortConfigTable 1 } + +LldpXMedPortConfigEntry ::= SEQUENCE { + lldpXMedPortCapSupported LldpXMedCapabilities, + lldpXMedPortConfigTLVsTxEnable LldpXMedCapabilities, + lldpXMedPortConfigNotifEnable TruthValue +} + +lldpXMedPortCapSupported OBJECT-TYPE + SYNTAX LldpXMedCapabilities + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The bitmap includes the MED organizationally defined set of LLDP + TLVs whose transmission is possible for the respective port + on the LLDP agent of the device. Each bit in the bitmap corresponds + to an LLDP-MED subtype associated with a specific TIA TR41.4 MED + optional TLV. If the bit is set, the agent supports the + corresponding TLV." + REFERENCE + "ANSI/TIA-1057, Section 10.2.2.3" + ::= { lldpXMedPortConfigEntry 1 } + +lldpXMedPortConfigTLVsTxEnable OBJECT-TYPE + SYNTAX LldpXMedCapabilities + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, + includes the MED organizationally defined set of LLDP + TLVs whose transmission is allowed on the local LLDP agent by + the network management. Each bit in the bitmap corresponds + to an LLDP-MED subtype associated with a specific TIA TR41.4 MED + optional TLV. If the bit is set, the agent will send the + corresponding TLV if the respective capability is supported per + port. + + Setting a bit with in this object for a non-supported capability + shall have no functional effect and will result in an inconsistent + value error returned to the management application. + + There are other rules and restrictions that prevent arbitrary + combinations of TLVs to be enabled on LLDP-MED devices according to + the device classes. These rules are defined in Section 10.2.1, + Tables 5 - 9 of ANSI/TIA-1057. In case a management application + attempts to set this object to a value that does not follow the rules, + the set operation shall have and will result in an inconsistent + value error returned to the management application. + + Setting this object to an empty set is valid and effectively + disables LLDP-MED on a per-port basis by disabling transmission of + all MED organizational TLVs. In this case the remote tables objects + in the LLDP-MED MIB corresponding to the respective port will not + be populated. + + The default value for lldpXMedPortConfigTLVsTxEnable object + is an empty set, which means no enumerated values are set. + + The value of this object must be restored from non-volatile + storage after a re-initialization of the management system." + REFERENCE + "ANSI/TIA-1057, Section 10.2.2.3" + ::= { lldpXMedPortConfigEntry 2 } + +lldpXMedPortConfigNotifEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A value of 'true(1)' enables sending the topology change + traps on this port. + A value of 'false(2)' disables sending the topology change + traps on this port." + REFERENCE + " ANSI/TIA-1057, Section 12.3" + DEFVAL { false } + ::= { lldpXMedPortConfigEntry 3 } + + + +lldpXMedFastStartRepeatCount OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of times the fast start LLDPDU are being sent during the + activation of the fast start mechanism defined by LLDP-MED." + REFERENCE + " ANSI/TIA-1057, Section 11.2.1" + DEFVAL { 3 } + ::= { lldpXMedConfig 3 } + + + + +------------------------------------------------------------------------------ +-- LLDP-MED - Local Device Information +------------------------------------------------------------------------------ +--- +--- lldpXMedLocMediaPolicyTable: Local Media Policy +--- Information Table +--- +--- +lldpXMedLocMediaPolicyTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedLocMediaPolicyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains one row per policy type per port + of media policy information (as a part of the MED + organizational extension) on the local system known + to this agent." + ::= { lldpXMedLocalData 1 } + +lldpXMedLocMediaPolicyEntry OBJECT-TYPE + SYNTAX LldpXMedLocMediaPolicyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a particular policy on a specific + port component." + INDEX { lldpLocPortNum, lldpXMedLocMediaPolicyAppType } + ::= { lldpXMedLocMediaPolicyTable 1 } + +LldpXMedLocMediaPolicyEntry ::= SEQUENCE { + lldpXMedLocMediaPolicyAppType PolicyAppType, + lldpXMedLocMediaPolicyVlanID Integer32, + lldpXMedLocMediaPolicyPriority Integer32, + lldpXMedLocMediaPolicyDscp Dscp, + lldpXMedLocMediaPolicyUnknown TruthValue, + lldpXMedLocMediaPolicyTagged TruthValue +} + +lldpXMedLocMediaPolicyAppType OBJECT-TYPE + SYNTAX PolicyAppType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The media type that defines the primary function of the + application for the policy advertised by an endpoint." + REFERENCE + "ANSI/TIA-1057, Section 10.2.3.1" + ::= { lldpXMedLocMediaPolicyEntry 1 } + +lldpXMedLocMediaPolicyVlanID OBJECT-TYPE + SYNTAX Integer32 (0|1..4094|4095) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An extension of the VLAN Identifier for the port, + as defined in IEEE 802.1P-1998. + + A value of 1 through 4094 is used to define a valid PVID. + + A value of 0 shall be used if the device is using priority tagged + frames, meaning that only the 802.1p priority level is significant + and the default VID of the ingress port is being used instead. + + A value of 4095 is reserved for implementation use." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.5" + ::= { lldpXMedLocMediaPolicyEntry 2 } + +lldpXMedLocMediaPolicyPriority OBJECT-TYPE + SYNTAX Integer32 (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the 802.1p priority + which is associated with the given port on the + local system." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.6 " + ::= { lldpXMedLocMediaPolicyEntry 3 } + +lldpXMedLocMediaPolicyDscp OBJECT-TYPE + SYNTAX Dscp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the Differentiated Service + Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 + which is associated with the given port on the local system." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.7" + ::= { lldpXMedLocMediaPolicyEntry 4 } + +lldpXMedLocMediaPolicyUnknown OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A value of 'true' indicates that the + network policy for the specified application type is + currently unknown. In this case, the VLAN ID, the + layer 2 priority and the DSCP value fields are ignored. + A value of 'false' indicates that this network policy + is defined " + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.2" + ::= { lldpXMedLocMediaPolicyEntry 5 } + +lldpXMedLocMediaPolicyTagged OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A value of 'true' indicates that the application is using a + tagged VLAN. + A value of 'false' indicates that for the specific application + the device either is using an untagged VLAN or does not + support port based VLAN operation. In this case, both the + VLAN ID and the Layer 2 priority fields are ignored and + only the DSCP value has relevance " + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.3" + ::= { lldpXMedLocMediaPolicyEntry 6 } + + + +--- Inventory Information +--- Local Inventory Information transmitted by an endpoint + +lldpXMedLocHardwareRev OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific hardware revision string + as advertised by the endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.1" + ::= { lldpXMedLocalData 2 } + +lldpXMedLocFirmwareRev OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific firmware revision string + as advertised by the endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.2" + ::= { lldpXMedLocalData 3 } + +lldpXMedLocSoftwareRev OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific software revision string + as advertised by the endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.3" + ::= { lldpXMedLocalData 4 } + +lldpXMedLocSerialNum OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific serial number + as advertised by the endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.4" + ::= { lldpXMedLocalData 5 } + +lldpXMedLocMfgName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific manufacturer name + as advertised by the endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.5" + ::= { lldpXMedLocalData 6 } + +lldpXMedLocModelName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific model name + as advertised by the endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.6" + ::= { lldpXMedLocalData 7 } + +lldpXMedLocAssetID OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific asset tracking identifier + as advertised by the endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.7" + ::= { lldpXMedLocalData 8 } + + + +--- Location Information +--- Local Location Information transmitted by an endpoint +--- lldpXMedLocLocationTable - Location Information +--- + +lldpXMedLocLocationTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedLocLocationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains Location information as advertised + by the local system. + + The information may be configured per port by a Location + Information Server (LIS) or other management application. + + Multiple Location TLVs of different subtypes may be transmitted + in the same PDU. + + The information in this table MUST be stored in non-volatile-memory + and persist over restart/reboot sequences." + ::= { lldpXMedLocalData 9 } + +lldpXMedLocLocationEntry OBJECT-TYPE + SYNTAX LldpXMedLocLocationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about Location information for the local device." + INDEX { lldpLocPortNum, lldpXMedLocLocationSubtype} + ::= { lldpXMedLocLocationTable 1 } + +LldpXMedLocLocationEntry ::= SEQUENCE { + lldpXMedLocLocationSubtype LocationSubtype, + lldpXMedLocLocationInfo OCTET STRING + } + + + +lldpXMedLocLocationSubtype OBJECT-TYPE + SYNTAX LocationSubtype + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The location subtype advertised by the local device." + REFERENCE + "ANSI/TIA-1057, Section 10.2.4.2" + ::= { lldpXMedLocLocationEntry 1 } + + +lldpXMedLocLocationInfo OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..256)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The location information. Parsing of this information is + dependent upon the location subtype, as defined by the value of the + lldpXMedLocLocationSubtype object. " + REFERENCE + "ANSI/TIA-1057, Section 10.2.4.3" + DEFVAL { "" } + ::= { lldpXMedLocLocationEntry 2 } + +--- Extended Power over Ethernet objects +--- + +lldpXMedLocXPoEDeviceType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + pseDevice(2), + pdDevice(3), + none(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the type of Power-via-MDI (Power over Ethernet) advertised + by the local device. + + A value pseDevice(2) indicates that the device is advertised as a + Power Sourcing Entity (PSE). + + A value pdDevice(3) indicates that the device is advertised as a + Powered Device (PD). + + A value of none(4) indicates that the device does not support PoE." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.1" + ::= { lldpXMedLocalData 10 } + +--- Extended PoE - PSE objects + + + +--- PSE Port Table + +lldpXMedLocXPoEPSEPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedLocXPoEPSEPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains one row per port of PSE PoE + information on the local system known to this agent." + ::= { lldpXMedLocalData 11 } + +lldpXMedLocXPoEPSEPortEntry OBJECT-TYPE + SYNTAX LldpXMedLocXPoEPSEPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a particular port PoE information." + INDEX { lldpLocPortNum } + ::= { lldpXMedLocXPoEPSEPortTable 1 } + +LldpXMedLocXPoEPSEPortEntry ::= SEQUENCE { + lldpXMedLocXPoEPSEPortPowerAv Gauge32, + lldpXMedLocXPoEPSEPortPDPriority INTEGER +} + +lldpXMedLocXPoEPSEPortPowerAv OBJECT-TYPE + SYNTAX Gauge32 (0..1023) + UNITS "tenth of watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the power available from the + PSE via this port expressed in units of 0.1 watts." + REFERENCE + " ANSI/TIA-1057, Section 10.2.5.4 " + ::= { lldpXMedLocXPoEPSEPortEntry 1 } + +lldpXMedLocXPoEPSEPortPDPriority OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + critical(2), + high(3), + low(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reflects the PD power priority that is being advertised on this + PSE port. + + If both locally configure priority and + ldpXMedRemXPoEPDPowerPriority are available on this port, it is + a matter of local policy which one takes precedence. This object + reflects the active value on this port. + + If the priority is not configured or known by the PD, the value + unknown(1) will be returned. + + A value critical(2) indicates that the device advertises its power + Priority as critical, as per RFC 3621. + + A value high(3) indicates that the device advertises its power + Priority as high, as per RFC 3621. + + A value low(4) indicates that the device advertises its power + Priority as low, as per RFC 3621." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.3" + ::= { lldpXMedLocXPoEPSEPortEntry 2 } + + + +lldpXMedLocXPoEPSEPowerSource OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + primary(2), + backup(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the type of PSE Power Source advertised + by the local device. + + A value primary(2) indicates that the device advertises its power + source as primary. + + A value backup(3) indicates that the device advertises its power + Source as backup." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.2" + ::= { lldpXMedLocalData 12 } + + +--- Extended PoE - PD objects + +lldpXMedLocXPoEPDPowerReq OBJECT-TYPE + SYNTAX Gauge32 (0..1023) + UNITS "tenth of watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the power required by a + PD expressed in units of 0.1 watts." + REFERENCE + " ANSI/TIA-1057, Section 10.2.4.3 " + ::= { lldpXMedLocalData 13 } + +lldpXMedLocXPoEPDPowerSource OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + fromPSE(2), + local(3), + localAndPSE(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the type of Power Source advertised as being used + by the local device. + + A value fromPSE(2) indicates that the device advertises its power + source as received from a PSE. + + A value local(3) indicates that the device advertises its power + source as local. + + A value localAndPSE(4) indicates that the device advertises its + power source as using both local and PSE power." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.2" + ::= { lldpXMedLocalData 14 } + +lldpXMedLocXPoEPDPowerPriority OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + critical(2), + high(3), + low(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the priority advertised as being required by this PD. + + A value critical(2) indicates that the device advertises its power + Priority as critical, as per RFC 3621. + + A value high(3) indicates that the device advertises its power + Priority as high, as per RFC 3621. + + A value low(4) indicates that the device advertises its power + Priority as low, as per RFC 3621." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.3" + ::= { lldpXMedLocalData 15 } + + + +------------------------------------------------------------------------------ +-- LLDP-MED - Remote Devices Information +------------------------------------------------------------------------------ + + + +-- LLdpXMedRemCapabilitiesTable +-- this table is read by a manager to determine what capabilities +-- exists and are enabled on the remote system connected to the port + +-- The information in this table is based upon the information advertised +-- by the remote device and received on each port in the capabilities TLV + +lldpXMedRemCapabilitiesTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedRemCapabilitiesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that displays LLDP-MED capabilities of remote devices + connected to individual ports." + ::= { lldpXMedRemoteData 1 } + +lldpXMedRemCapabilitiesEntry OBJECT-TYPE + SYNTAX LldpXMedRemCapabilitiesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "LLDP-MED capabilities of remote devices connected to the device + ports and communicating via LLDP-MED. + + The remote tables in the LLDP-MED MIB excepting this table may be + sparsely populate. An entry in one of these table is meaningful + and shall be populated by the agent only if the corresponding bits + for the respective function are set in the objects in this table. " + INDEX { lldpRemTimeMark, + lldpRemLocalPortNum, + lldpRemIndex } + ::= { lldpXMedRemCapabilitiesTable 1 } + +LldpXMedRemCapabilitiesEntry ::= SEQUENCE { + lldpXMedRemCapSupported LldpXMedCapabilities, + lldpXMedRemCapCurrent LldpXMedCapabilities, + lldpXMedRemDeviceClass LldpXMedDeviceClass +} + +lldpXMedRemCapSupported OBJECT-TYPE + SYNTAX LldpXMedCapabilities + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The bitmap includes the MED organizationally defined set of LLDP + TLVs whose transmission is possible on the LLDP agent of the remote + device connected to this port. Each bit in the bitmap corresponds + to an LLDP-MED subtype associated with a specific TIA TR41.4 MED + optional TLV. If the bit is set, the agent has the capability + to support the corresponding TLV." + REFERENCE + "ANSI/TIA-1057, Sections 10.2.2.1" + ::= { lldpXMedRemCapabilitiesEntry 1 } + +lldpXMedRemCapCurrent OBJECT-TYPE + SYNTAX LldpXMedCapabilities + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The bitmap includes the MED organizationally defined set of LLDP + TLVs whose transmission is possible on the LLDP agent of the remote + device connected to this port. Each bit in the bitmap corresponds + to an LLDP-MED subtype associated with a specific TIA TR41.4 MED + optional TLV. If the bit is set, the agent currently supports the + corresponding TLV." + REFERENCE + "ANSI/TIA-1057, Sections 10.2.2.1" + ::= { lldpXMedRemCapabilitiesEntry 2 } + +lldpXMedRemDeviceClass OBJECT-TYPE + SYNTAX LldpXMedDeviceClass + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Device Class as advertised by the device remotely connected to the + port." + REFERENCE + " ANSI/TIA-1057, Section 10.2.2.2" + ::= { lldpXMedRemCapabilitiesEntry 3 } + + + + +--- +--- +--- lldpXMedRemMediaPolicyTable: Media Policy Table +--- +--- +lldpXMedRemMediaPolicyTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedRemMediaPolicyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains media policy information as advertised + by the remote system. + + This table may be sparsely populated. Entries in this table are + relevant only if the networkPolicy(0) bits in the + lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the + corresponding ports are set." + ::= { lldpXMedRemoteData 2 } + +lldpXMedRemMediaPolicyEntry OBJECT-TYPE + SYNTAX LldpXMedRemMediaPolicyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about the per port per policy type policy + information for a particular physical network connection." + INDEX { lldpRemTimeMark, + lldpRemLocalPortNum, + lldpRemIndex, + lldpXMedRemMediaPolicyAppType } + ::= { lldpXMedRemMediaPolicyTable 1 } + + +LldpXMedRemMediaPolicyEntry ::= SEQUENCE { + lldpXMedRemMediaPolicyAppType PolicyAppType, + lldpXMedRemMediaPolicyVlanID Integer32, + lldpXMedRemMediaPolicyPriority Integer32, + lldpXMedRemMediaPolicyDscp Dscp, + lldpXMedRemMediaPolicyUnknown TruthValue, + lldpXMedRemMediaPolicyTagged TruthValue +} + +lldpXMedRemMediaPolicyAppType OBJECT-TYPE + SYNTAX PolicyAppType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The media type that defines the primary function of the + application for the policy advertised by the endpoint connected + remotely to this port." + REFERENCE + "ANSI/TIA-1057, Section 10.2.3.1" + ::= { lldpXMedRemMediaPolicyEntry 1 } + +lldpXMedRemMediaPolicyVlanID OBJECT-TYPE + SYNTAX Integer32 (0|1..4094|4095) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An extension of the VLAN Identifier for the remote system + connected to this port, as defined in IEEE 802.1P-1998. + + A value of 1 through 4094 is used to define a valid PVID. + + A value of 0 shall be used if the device is using priority tagged + frames, meaning that only the 802.1p priority level is significant + and the default VID of the ingress port is being used instead. + + A value of 4095 is reserved for implementation use." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.5" + ::= { lldpXMedRemMediaPolicyEntry 2 } + +lldpXMedRemMediaPolicyPriority OBJECT-TYPE + SYNTAX Integer32 (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the 802.1p priority + which is associated with the remote system connected at + given port." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.6" + ::= { lldpXMedRemMediaPolicyEntry 3 } + +lldpXMedRemMediaPolicyDscp OBJECT-TYPE + SYNTAX Dscp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the Differentiated Service + Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 + which is associated with remote system connected at the port." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.7" + ::= { lldpXMedRemMediaPolicyEntry 4 } + +lldpXMedRemMediaPolicyUnknown OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A value of 'true' indicates that the + network policy for the specified application type is + currently unknown. In this case, the VLAN ID, the + layer 2 priority and the DSCP value fields are ignored. + A value of 'false' indicates that this network policy + is defined." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.2" + ::= { lldpXMedRemMediaPolicyEntry 5 } + +lldpXMedRemMediaPolicyTagged OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A value of 'true' indicates that the application is using a + tagged VLAN. + A value of 'false' indicates that for the specific application + the device either is using an untagged VLAN or does not + support port based VLAN operation. In this case, both the + VLAN ID and the Layer 2 priority fields are ignored and + only the DSCP value has relevance " + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.3" + ::= { lldpXMedRemMediaPolicyEntry 6 } + + + + +--- lldpXMedRemInventoryTable - Remote Inventory Information +--- + +lldpXMedRemInventoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedRemInventoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains inventory information as advertised + by the remote system. + + This table may be sparsely populated. Entries in this table are + relevant only if the inventory(2) bits in the + lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the + corresponding ports are set " + ::= { lldpXMedRemoteData 3 } + +lldpXMedRemInventoryEntry OBJECT-TYPE + SYNTAX LldpXMedRemInventoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about inventory information for the remote devices + connected to the ports." + INDEX { lldpRemTimeMark, + lldpRemLocalPortNum, + lldpRemIndex } + ::= { lldpXMedRemInventoryTable 1 } + +LldpXMedRemInventoryEntry ::= SEQUENCE { + lldpXMedRemHardwareRev SnmpAdminString, + lldpXMedRemFirmwareRev SnmpAdminString, + lldpXMedRemSoftwareRev SnmpAdminString, + lldpXMedRemSerialNum SnmpAdminString, + lldpXMedRemMfgName SnmpAdminString, + lldpXMedRemModelName SnmpAdminString, + lldpXMedRemAssetID SnmpAdminString + } + +lldpXMedRemHardwareRev OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific hardware revision string + as advertised by the remote endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.1" + ::= { lldpXMedRemInventoryEntry 1 } + +lldpXMedRemFirmwareRev OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific firmware revision string + as advertised by the remote endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.2" + ::= { lldpXMedRemInventoryEntry 2 } + +lldpXMedRemSoftwareRev OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific software revision string + as advertised by the remote endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.3" + ::= { lldpXMedRemInventoryEntry 3 } + +lldpXMedRemSerialNum OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific serial number + as advertised by the remote endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.4" + ::= { lldpXMedRemInventoryEntry 4 } + +lldpXMedRemMfgName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific manufacturer name + as advertised by the remote endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.5" + ::= { lldpXMedRemInventoryEntry 5 } + +lldpXMedRemModelName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific model name + as advertised by the remote endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.6" + ::= { lldpXMedRemInventoryEntry 6 } + +lldpXMedRemAssetID OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vendor-specific asset tracking identifier + as advertised by the remote endpoint." + REFERENCE + " ANSI/TIA-1057, Section 10.2.6.7" + ::= { lldpXMedRemInventoryEntry 7 } + + +--- lldpXMedRemLocationTable - Remote Location Information +--- + +lldpXMedRemLocationTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedRemLocationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains Location information as advertised + by the remote system. + + This table may be sparsely populated. Entries in this table are + relevant only if the Location(3) bits in the + lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the + corresponding ports are set " + ::= { lldpXMedRemoteData 4 } + +lldpXMedRemLocationEntry OBJECT-TYPE + SYNTAX LldpXMedRemLocationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about Location information for the remote devices + connected to the ports." + INDEX { lldpRemTimeMark, + lldpRemLocalPortNum, + lldpRemIndex, + lldpXMedRemLocationSubtype} + ::= { lldpXMedRemLocationTable 1 } + +LldpXMedRemLocationEntry ::= SEQUENCE { + lldpXMedRemLocationSubtype LocationSubtype, + lldpXMedRemLocationInfo OCTET STRING + } + + +lldpXMedRemLocationSubtype OBJECT-TYPE + SYNTAX LocationSubtype + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The location subtype advertised by the remote endpoint." + REFERENCE + "ANSI/TIA-1057, Section 10.2.4.2 " + ::= { lldpXMedRemLocationEntry 1 } + + +lldpXMedRemLocationInfo OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..256)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The location information advertised by the remote endpoint. + Parsing of this information is dependent upon the location + subtype, as defined by the value of the corresponding + lldpXMedRemLocationSubType object. " + REFERENCE + "ANSI/TIA-1057, Section 10.2.4.3 " + ::= { lldpXMedRemLocationEntry 2 } + + +--- lldpXMedRemXPoETable - Information about Remote PoE Device Type +--- + +lldpXMedRemXPoETable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedRemXPoEEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains information about the PoE device type + as advertised by the remote system. + + This table is densely populated." + ::= { lldpXMedRemoteData 5 } + +lldpXMedRemXPoEEntry OBJECT-TYPE + SYNTAX LldpXMedRemXPoEEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about PoE type of the remote devices + connected to the ports." + INDEX { lldpRemTimeMark, + lldpRemLocalPortNum, + lldpRemIndex } + ::= { lldpXMedRemXPoETable 1 } + +LldpXMedRemXPoEEntry ::= SEQUENCE { + lldpXMedRemXPoEDeviceType INTEGER + } + + +lldpXMedRemXPoEDeviceType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + pseDevice(2), + pdDevice(3), + none(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the type of Power-via-MDI (Power over Ethernet) advertised + by the remote device. + + A value pseDevice(2) indicates that the device is advertised as a + Power Sourcing Entity (PSE). + + A value pdDevice(3) indicates that the device is advertised as a + Powered Device (PD). + + A value none(4) indicates that the device does not support PoE." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.1" + ::= { lldpXMedRemXPoEEntry 1 } + + +--- lldpXMedRemXPoEPDTable - Extended PoE PSE Information from the remote device +--- + +lldpXMedRemXPoEPSETable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedRemXPoEPSEEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains extended PoE information as advertised + by the remote devices of PSE type. + + This table may be sparsely populated. Entries in this table are + relevant only if the extendedPSE(4) bits in the + lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the + corresponding ports are set " + ::= { lldpXMedRemoteData 6 } + +lldpXMedRemXPoEPSEEntry OBJECT-TYPE + SYNTAX LldpXMedRemXPoEPSEEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about Extended PoE PSE information for + the remote devices connected to the ports." + INDEX { lldpRemTimeMark, + lldpRemLocalPortNum, + lldpRemIndex } + ::= { lldpXMedRemXPoEPSETable 1 } + +LldpXMedRemXPoEPSEEntry ::= SEQUENCE { + lldpXMedRemXPoEPSEPowerAv Gauge32, + lldpXMedRemXPoEPSEPowerSource INTEGER, + lldpXMedRemXPoEPSEPowerPriority INTEGER + } + + +lldpXMedRemXPoEPSEPowerAv OBJECT-TYPE + SYNTAX Gauge32 (0..1023) + UNITS "tenth of watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the power available from the + PSE via this port expressed in units of 0.1 watts on the remote + device." + REFERENCE + " ANSI/TIA-1057, Section 10.2.5.4" + ::= { lldpXMedRemXPoEPSEEntry 1 } + +lldpXMedRemXPoEPSEPowerSource OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + primary(2), + backup(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the type of PSE Power Source advertised + by the remote device. + + A value primary(2) indicates that the device advertises its power + source as primary. + + A value backup(3) indicates that the device advertises its power + Source as backup." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.2" + ::= { lldpXMedRemXPoEPSEEntry 2 } + +lldpXMedRemXPoEPSEPowerPriority OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + critical(2), + high(3), + low(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the PSE power priority + advertised by the remote device. + + A value critical(2) indicates that the device advertises its power + priority as critical, as per RFC 3621. + + A value high(3) indicates that the device advertises its power + priority as high, as per RFC 3621. + + A value low(4) indicates that the device advertises its power + priority as low, as per RFC 3621." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.3" + ::= { lldpXMedRemXPoEPSEEntry 3 } + + + + +--- lldpXMedRemXPoEPDTable - Extended PoE PD Information from the remote device +--- + +lldpXMedRemXPoEPDTable OBJECT-TYPE + SYNTAX SEQUENCE OF LldpXMedRemXPoEPDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains extended PoE information as advertised + by the remote devices of PD type. + + This table may be sparsely populated. Entries in this table are + relevant only if the extendedPD(5) bits in the + lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the + corresponding ports are set " + ::= { lldpXMedRemoteData 7 } + +lldpXMedRemXPoEPDEntry OBJECT-TYPE + SYNTAX LldpXMedRemXPoEPDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about XPoEPD information for the remote devices + connected to the ports." + INDEX { lldpRemTimeMark, + lldpRemLocalPortNum, + lldpRemIndex } + ::= { lldpXMedRemXPoEPDTable 1 } + +LldpXMedRemXPoEPDEntry ::= SEQUENCE { + lldpXMedRemXPoEPDPowerReq Gauge32, + lldpXMedRemXPoEPDPowerSource INTEGER, + lldpXMedRemXPoEPDPowerPriority INTEGER + } + + +lldpXMedRemXPoEPDPowerReq OBJECT-TYPE + SYNTAX Gauge32 (0..1023) + UNITS "tenth of watt" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the value of the power required by a + PD connected remotely to the port + expressed in units of 0.1 watts." + REFERENCE + " ANSI/TIA-1057, Section 10.2.5.4 " + ::= { lldpXMedRemXPoEPDEntry 1 } + +lldpXMedRemXPoEPDPowerSource OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + fromPSE(2), + local(3), + localAndPSE(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the type of Power Source advertised as being used + by the device connected remotely to the port. + + A value fromPSE(2) indicates that the device advertises its power + source as received from a PSE. + + A value local(3) indicates that the device advertises its power + source as local. + + A value localAndPSE(4) indicates that the device advertises its + power source as using both local and PSE power." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.2" + ::= { lldpXMedRemXPoEPDEntry 2 } + +lldpXMedRemXPoEPDPowerPriority OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + critical(2), + high(3), + low(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the priority advertised as being required by the PD + connected remotely to the port. + + A value critical(2) indicates that the device advertises its power + Priority as critical, as per RFC 3621. + + A value high(3) indicates that the device advertises its power + Priority as high, as per RFC 3621. + + A value low(4) indicates that the device advertises its power + Priority as low, as per RFC 3621." + REFERENCE + "ANSI/TIA-1057, Section 10.2.5.3" + ::= { lldpXMedRemXPoEPDEntry 3 } + + + + + + + +--- + + +-- conformance information + +lldpXMedConformance OBJECT IDENTIFIER ::= { lldpXMedMIB 2 } +lldpXMedCompliances OBJECT IDENTIFIER ::= { lldpXMedConformance 1 } +lldpXMedGroups OBJECT IDENTIFIER ::= { lldpXMedConformance 2 } + +-- compliance statements + +lldpXMedCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities which implement + the LLDP MED extension MIB." + + MODULE -- this module + MANDATORY-GROUPS { lldpXMedConfigGroup, + lldpXMedRemSysGroup, + lldpXMedNotificationsGroup + } + GROUP lldpXMedOptMediaPolicyGroup + DESCRIPTION + "This group represents the information associated with + the LLDP-MED optional Media Policy TLVs, + therefore the agent may not implement them." + GROUP lldpXMedOptInventoryGroup + DESCRIPTION + "This group represents the information associated with + the LLDP-MED optional inventory TLVs, + therefore the agent may not implement them." + GROUP lldpXMedOptLocationGroup + DESCRIPTION + "This group represents the information associated with + the LLDP-MED optional Location TLVs, + therefore the agent may not implement them." + GROUP lldpXMedOptPoEPSEGroup + DESCRIPTION + "This group represents the information associated with + the LLDP-MED optional extended PoE PolicyTLVs, carrying + PSE information, therefore the agent may + not implement them." + GROUP lldpXMedOptPoEPDGroup + DESCRIPTION + " This group represents the information associated with + the LLDP-MED optional extended PoE Policy TLVs, carrying + PD information, therefore the agent may + not implement them." + ::= { lldpXMedCompliances 1 } + +-- MIB groupings + +lldpXMedConfigGroup OBJECT-GROUP + OBJECTS { + lldpXMedPortCapSupported, + lldpXMedPortConfigTLVsTxEnable, + lldpXMedPortConfigNotifEnable, + lldpXMedFastStartRepeatCount, + lldpXMedLocXPoEDeviceType, + lldpXMedLocDeviceClass + } + STATUS current + DESCRIPTION + "The collection of objects which are used to configure or + describe the configuration or behavior of the LLDP-MED + organizational extension implementation." + ::= { lldpXMedGroups 1 } + +lldpXMedOptMediaPolicyGroup OBJECT-GROUP + OBJECTS { + lldpXMedLocMediaPolicyVlanID, + lldpXMedLocMediaPolicyPriority, + lldpXMedLocMediaPolicyDscp, + lldpXMedLocMediaPolicyUnknown, + lldpXMedLocMediaPolicyTagged + } + STATUS current + DESCRIPTION + "The collection of objects which are used to represent LLDP + MED organizational extensions for Media Policy Information." + ::= { lldpXMedGroups 2 } + + + +lldpXMedOptInventoryGroup OBJECT-GROUP + OBJECTS { + lldpXMedLocHardwareRev, + lldpXMedLocFirmwareRev, + lldpXMedLocSoftwareRev, + lldpXMedLocSerialNum, + lldpXMedLocMfgName, + lldpXMedLocModelName, + lldpXMedLocAssetID + } + STATUS current + DESCRIPTION + "The collection of objects which are used to represent LLDP + MED organizational extension for inventory Information." + ::= { lldpXMedGroups 3 } +lldpXMedOptLocationGroup OBJECT-GROUP + OBJECTS { + lldpXMedLocLocationInfo + } + STATUS current + DESCRIPTION + "The collection of objects which are used to represent LLDP + MED organizational extension for Location Information." + ::= { lldpXMedGroups 4 } + + +lldpXMedOptPoEPSEGroup OBJECT-GROUP + OBJECTS { + lldpXMedLocXPoEPSEPortPowerAv, + lldpXMedLocXPoEPSEPortPDPriority, + lldpXMedLocXPoEPSEPowerSource + } + STATUS current + DESCRIPTION + "The collection of objects which are used to represent LLDP + MED organizational extensions for PoE PSE Information." + ::= { lldpXMedGroups 5 } + +lldpXMedOptPoEPDGroup OBJECT-GROUP + OBJECTS { + lldpXMedLocXPoEPDPowerReq, + lldpXMedLocXPoEPDPowerSource, + lldpXMedLocXPoEPDPowerPriority + } + STATUS current + DESCRIPTION + "The collection of objects which are used to represent LLDP + MED organizational extensions for PoE PD Information." + ::= { lldpXMedGroups 6 } + +lldpXMedRemSysGroup OBJECT-GROUP + OBJECTS { + lldpXMedRemCapSupported, + lldpXMedRemCapCurrent, + lldpXMedRemDeviceClass, + lldpXMedRemMediaPolicyVlanID, + lldpXMedRemMediaPolicyPriority, + lldpXMedRemMediaPolicyDscp, + lldpXMedRemMediaPolicyUnknown, + lldpXMedRemMediaPolicyTagged, + lldpXMedRemHardwareRev, + lldpXMedRemFirmwareRev, + lldpXMedRemSoftwareRev, + lldpXMedRemSerialNum, + lldpXMedRemMfgName, + lldpXMedRemModelName, + lldpXMedRemAssetID, + lldpXMedRemLocationInfo, + lldpXMedRemXPoEDeviceType, + lldpXMedRemXPoEPSEPowerAv, + lldpXMedRemXPoEPSEPowerSource, + lldpXMedRemXPoEPSEPowerPriority, + lldpXMedRemXPoEPDPowerReq, + lldpXMedRemXPoEPDPowerSource, + lldpXMedRemXPoEPDPowerPriority + } + STATUS current + DESCRIPTION + "The collection of objects which are used to represent LLDP- + MED organizational extension Remote Device Information." + ::= { lldpXMedGroups 7 } + + +-- LLDP MED Extension Notifications +-- Transmission of LLDP MED Extension Notification is controlled by the +-- lldpNotificationInterval object in the LLDP MIB defined in +-- IEEE 802.1AB-2005 + +lldpXMedTopologyChangeDetected NOTIFICATION-TYPE + OBJECTS { lldpRemChassisIdSubtype, + lldpRemChassisId, + lldpXMedRemDeviceClass + } + STATUS current +DESCRIPTION + "A notification generated by the local device sensing + a change in the topology that indicates that a new remote + device attached to a local port, or a remote device disconnected + or moved from one port to another." + ::= { lldpXMedNotifications 1 } + + + +lldpXMedNotificationsGroup NOTIFICATION-GROUP + NOTIFICATIONS { lldpXMedTopologyChangeDetected } + STATUS current + DESCRIPTION + "Notifications sent by an LLDP-MED agent." + ::= { lldpXMedGroups 8 } + + + + +END |