diff options
Diffstat (limited to 'MIBS/ciena/CIENA-CES-DHCP-RELAY-MIB')
| -rw-r--r-- | MIBS/ciena/CIENA-CES-DHCP-RELAY-MIB | 526 |
1 files changed, 526 insertions, 0 deletions
diff --git a/MIBS/ciena/CIENA-CES-DHCP-RELAY-MIB b/MIBS/ciena/CIENA-CES-DHCP-RELAY-MIB new file mode 100644 index 0000000..910c163 --- /dev/null +++ b/MIBS/ciena/CIENA-CES-DHCP-RELAY-MIB @@ -0,0 +1,526 @@ +-- This file was included in Ciena MIB release MIBS-CIENA-CES-08-07-00-024 + --
+ -- CIENA-CES-DHCP-RELAY-MIB.my
+ --
+
+ CIENA-CES-DHCP-RELAY-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ Counter32, OBJECT-TYPE, MODULE-IDENTITY
+ FROM SNMPv2-SMI
+ DisplayString, TruthValue, RowStatus, TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ cienaCesStatistics
+ FROM CIENA-SMI;
+
+
+ cienaCesDhcpRelayMIB MODULE-IDENTITY
+ LAST-UPDATED "201706070000Z"
+ ORGANIZATION "Ciena Corp."
+ CONTACT-INFO
+ " Mib Meister
+ 7035 Ridge Road
+ Hanover, Maryland 21076
+ USA
+ Phone: +1 800 921 1144
+ Email: support@ciena.com"
+ DESCRIPTION
+ "The MIB module contains MIB objects to manage DHCP Relay."
+
+ REVISION "201706070000Z"
+ DESCRIPTION
+ "Updated contact info."
+
+ REVISION "201509090000Z"
+ DESCRIPTION
+ "Added new value to DhcpLiType: mplsVc(3).
+ Added new value to cienaCesDhcpRelayAgentCircuitId: liVs(4).
+ Added new value to cienaCesDhcpRelayAgentRemoteId: ridString(3).
+ Added new objects:
+ cienaCesDhcpRelayAgentReplaceOption82
+ cienaCesDhcpRelayAgentL2GlobalStatsClear
+ cienaCesDhcpRelayAgentL2Relayed
+ cienaCesDhcpRelayAgentL2Dropped
+ cienaCesDhcpRelayAgentL2Forwarded
+ cienaCesDhcpRelayAgentL2NotForRelay
+ cienaCesDhcpRelayAgentCidString
+ cienaCesDhcpRelayAgentRidString
+ cienaCesDhcpRelayAgentL2InvalidConfigPktDrop
+ cienaCesDhcpRelayAgentL2GeneralErrors
+ cienaCesDhcpRelayAgentL2Option82Replaced
+ cienaCesDhcpRelayAgentL2ForRelay
+ cienaCesDhcpRelayAgentL2ClientRelayed
+ cienaCesDhcpRelayAgentL2ServerRelayed"
+
+ REVISION "201303050000Z"
+ DESCRIPTION
+ "Added port and cidString to cienaCesDhcpRelayAgentCircuitId."
+
+ REVISION "201007220000Z"
+ DESCRIPTION
+ "Initial creation."
+
+ ::= { cienaCesStatistics 6 }
+
+ --
+ -- Node definitions
+ --
+
+ cienaCesDhcpRelayAgent OBJECT IDENTIFIER ::= { cienaCesDhcpRelayMIB 1 }
+
+ cienaCesDhcpRelayAgentGlobalAttrs OBJECT IDENTIFIER ::= { cienaCesDhcpRelayAgent 1 }
+
+ cienaCesDhcpRelayAgentGlobalStats OBJECT IDENTIFIER ::= { cienaCesDhcpRelayAgent 7 }
+
+
+ --
+ -- Textual convention
+ --
+ DhcpLiType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION "Logical Interface Attachment Types."
+ SYNTAX INTEGER {
+ subPort(1),
+ pbt-service(2),
+ mplsVc(3),
+ unknown(99)
+ }
+
+
+ --
+ -- DHCP Relay Agent Functionality
+ --
+ cienaCesDhcpRelayAgentCircuitId OBJECT-TYPE
+ SYNTAX INTEGER {
+ li(1),
+ port(2),
+ cidString(3),
+ liVs(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies the type of circuit ID to be used by the
+ DHCP relay agent. It can be set to li, port, cidString or liVs."
+ ::= { cienaCesDhcpRelayAgentGlobalAttrs 1 }
+
+ cienaCesDhcpRelayAgentRemoteId OBJECT-TYPE
+ SYNTAX INTEGER {
+ macAddress(1),
+ hostName(2),
+ ridString(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object specifies the type of remote agent ID to be used by
+ the DHCP relay agent. It can be set to macAddress, hostName or
+ ridString."
+ ::= { cienaCesDhcpRelayAgentGlobalAttrs 2 }
+
+ cienaCesDhcpRelayAgentL2State OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ enabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies the global administrative state of the DHCP L2 relay agent."
+ ::= { cienaCesDhcpRelayAgentGlobalAttrs 3 }
+
+ cienaCesDhcpRelayAgentReplaceOption82 OBJECT-TYPE
+ SYNTAX INTEGER {
+ on(1),
+ off(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Specifies whether or not the relay agent should replace an existing option 82."
+ ::= { cienaCesDhcpRelayAgentGlobalAttrs 4 }
+
+ --
+ -- DHCP Relay Agent Global Statistics
+ --
+ cienaCesDhcpRelayAgentL2GlobalStatsClear OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object, when set to 'true', clears the global statistics for the L2 DHCP relay."
+ ::= { cienaCesDhcpRelayAgentGlobalStats 1 }
+
+ cienaCesDhcpRelayAgentL2Relayed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object reports the number of packets that passed through the
+ L2 relays (processed and not dropped)."
+ ::= { cienaCesDhcpRelayAgentGlobalStats 2 }
+
+ cienaCesDhcpRelayAgentL2Dropped OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object reports the number of packets dropped by the relay.
+ Inspect the detailed statistic on each relay for more details related to dropped frames."
+ ::= { cienaCesDhcpRelayAgentGlobalStats 3 }
+
+ cienaCesDhcpRelayAgentL2Forwarded OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object reports the number of packets forwarded rather than relayed.
+ These are valid frames that didn't need to be processed by the relay."
+ ::= { cienaCesDhcpRelayAgentGlobalStats 4 }
+
+ cienaCesDhcpRelayAgentL2NotForRelay OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object reports the number of packets received by the relay but not intended for the relay.
+ Inspect the detailed statistic on each relay for more details related to dropped frames."
+ ::= { cienaCesDhcpRelayAgentGlobalStats 5 }
+ --
+ -- Table to control DHCP relay agent functionality on each L2 VS
+ --
+ cienaCesDhcpRelayAgentL2StateTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CienaCesDhcpRelayAgentL2StateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Tables that allow changing the configuration of DHCP relay agent functionality for
+ each cienaCesDhcpRelayAgentVs."
+ ::= { cienaCesDhcpRelayAgent 2 }
+
+ cienaCesDhcpRelayAgentL2StateEntry OBJECT-TYPE
+ SYNTAX CienaCesDhcpRelayAgentL2StateEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table to configure DHCP relay agent functionality."
+ INDEX { cienaCesDhcpRelayAgentVsIndex, cienaCesDhcpRelayAgentRlan }
+ ::= { cienaCesDhcpRelayAgentL2StateTable 1 }
+
+ CienaCesDhcpRelayAgentL2StateEntry ::= SEQUENCE {
+ cienaCesDhcpRelayAgentVsIndex INTEGER,
+ cienaCesDhcpRelayAgentRlan INTEGER,
+ cienaCesDhcpRelayAgentL2AdminState INTEGER,
+ cienaCesDhcpRelayAgentL2OperState INTEGER,
+ cienaCesDhcpRelayAgentL2StatsClear TruthValue,
+ cienaCesDhcpRelayAgentL2RowStatus RowStatus
+ }
+
+ cienaCesDhcpRelayAgentVsIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..1048575)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This MIB object specifies the VS on which DHCP relay agent is configured."
+ ::= { cienaCesDhcpRelayAgentL2StateEntry 1 }
+
+ cienaCesDhcpRelayAgentRlan OBJECT-TYPE
+ SYNTAX INTEGER (0..4095)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This MIB object specifies the RLAN on which the DHCP relay agent is configured."
+ ::= { cienaCesDhcpRelayAgentL2StateEntry 2 }
+
+ cienaCesDhcpRelayAgentL2AdminState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ enabled(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object allows the disabling or enabling of DHCP relay agent functionality on
+ the given VS."
+ ::= { cienaCesDhcpRelayAgentL2StateEntry 3 }
+
+ cienaCesDhcpRelayAgentL2OperState OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ enabled(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object shows the operational state of the DHCP relay agent on the given VS."
+ ::= { cienaCesDhcpRelayAgentL2StateEntry 4 }
+
+ cienaCesDhcpRelayAgentL2StatsClear OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This MIB object when set to 'true' clears DHCP relay agent statistics for the given VS."
+ ::= { cienaCesDhcpRelayAgentL2StateEntry 5 }
+
+ cienaCesDhcpRelayAgentL2RowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Set this MIB object to 'Destroy' to terminate DHCP L2 relaying
+ on the VS specified by cienaCesDhcpRelayAgentVs and cienaCesDhcpRelayAgentRlan.
+
+ Set this MIB object to 'CreateAndGo' to create DHCP L2 relaying
+ on the VS along with cienaCesDhcpRelayAgentVsIndex and cienaCesDhcpRelayAgentRlan."
+ ::= { cienaCesDhcpRelayAgentL2StateEntry 6 }
+
+ --
+ -- DHCP Relay Agent Trust Table
+ --
+ cienaCesDhcpRelayAgentTrustTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CienaCesDhcpRelayAgentTrustEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is used to specify the DHCP relay attributes of
+ logical interfaces to which DHCP relay agents are attached.
+ Entries in this table are created when a DHCP relay agent is
+ created and attached to a VS that already has logical
+ interfaces, or when logical interfaces are added to a VS for
+ which a DHCP relay is already created and attached."
+ ::= { cienaCesDhcpRelayAgent 5 }
+
+ cienaCesDhcpRelayAgentTrustEntry OBJECT-TYPE
+ SYNTAX CienaCesDhcpRelayAgentTrustEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry in this table can be used to specify the LI and VS to be trusted."
+ INDEX { cienaCesDhcpRelayAgentVsIndex, cienaCesDhcpRelayAgentRlan,
+ cienaCesDhcpRelayAgentTrustedLiType, cienaCesDhcpRelayAgentTrustedLiIndex }
+ ::= { cienaCesDhcpRelayAgentTrustTable 1 }
+
+ CienaCesDhcpRelayAgentTrustEntry ::= SEQUENCE {
+ cienaCesDhcpRelayAgentTrustedLiType DhcpLiType,
+ cienaCesDhcpRelayAgentTrustedLiIndex INTEGER,
+ cienaCesDhcpRelayAgentTrustMode INTEGER,
+ cienaCesDhcpRelayAgentCidString DisplayString,
+ cienaCesDhcpRelayAgentRidString DisplayString
+ }
+
+ cienaCesDhcpRelayAgentTrustedLiType OBJECT-TYPE
+ SYNTAX DhcpLiType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This MIB object is used as an index in the table and is used to specify the LI type."
+ ::= { cienaCesDhcpRelayAgentTrustEntry 1 }
+
+ cienaCesDhcpRelayAgentTrustedLiIndex OBJECT-TYPE
+ SYNTAX INTEGER (0..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This MIB object is used as an index in the table and is used to specify the LI index."
+ ::= { cienaCesDhcpRelayAgentTrustEntry 2 }
+
+ cienaCesDhcpRelayAgentTrustMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ clientTrust(1),
+ serverTrust(2),
+ dualRoleTrust(3),
+ unTrust(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This MIB object is used to set the port as client trusted,
+ server trusted, dual-role trusted or not trusted."
+ ::= { cienaCesDhcpRelayAgentTrustEntry 3 }
+
+ cienaCesDhcpRelayAgentCidString OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to get and set the CID string for the
+ logical interface."
+ ::= { cienaCesDhcpRelayAgentTrustEntry 4 }
+
+ cienaCesDhcpRelayAgentRidString OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (1..64))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object is used to get and set the RID string for the
+ logical interface."
+ ::= { cienaCesDhcpRelayAgentTrustEntry 5 }
+
+ --
+ -- DHCP Relay Agent L2 Statistics
+ --
+ cienaCesDhcpRelayAgentL2StatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CienaCesDhcpRelayAgentL2StatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Table to display L2 statistics for each cienaCesDhcpRelayAgentVs."
+ ::= { cienaCesDhcpRelayAgent 6 }
+
+ cienaCesDhcpRelayAgentL2StatsEntry OBJECT-TYPE
+ SYNTAX CienaCesDhcpRelayAgentL2StatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Entry in the table to display L2 statistics."
+ INDEX { cienaCesDhcpRelayAgentVsIndex, cienaCesDhcpRelayAgentRlan }
+ ::= { cienaCesDhcpRelayAgentL2StatsTable 1 }
+
+ CienaCesDhcpRelayAgentL2StatsEntry ::= SEQUENCE {
+ cienaCesDhcpRelayAgentL2IpSecHeaders Counter32,
+ cienaCesDhcpRelayAgentL2Option82Added Counter32,
+ cienaCesDhcpRelayAgentL2Option82Removed Counter32,
+ cienaCesDhcpRelayAgentL2UntrustedClientPortPktsRx Counter32,
+ cienaCesDhcpRelayAgentL2UntrustedServerPortPktsRx Counter32,
+ cienaCesDhcpRelayAgentL2SpoofedDhcpPkts Counter32,
+ cienaCesDhcpRelayAgentL2Option82ExceedMTU Counter32,
+ cienaCesDhcpRelayAgentL2NoTrustedServerPktDrop Counter32,
+ cienaCesDhcpRelayAgentL2NoTrustedClientPktDrop Counter32,
+ cienaCesDhcpRelayAgentL2InvalidConfigPktDrop Counter32,
+ cienaCesDhcpRelayAgentL2GeneralErrors Counter32,
+ cienaCesDhcpRelayAgentL2Option82Replaced Counter32,
+ cienaCesDhcpRelayAgentL2ForRelay Counter32,
+ cienaCesDhcpRelayAgentL2ClientRelayed Counter32,
+ cienaCesDhcpRelayAgentL2ServerRelayed Counter32
+ }
+
+ cienaCesDhcpRelayAgentL2IpSecHeaders OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of packets that include IP Sec headers."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 1 }
+
+ cienaCesDhcpRelayAgentL2Option82Added OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of packets that have had option 82 added."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 2 }
+
+ cienaCesDhcpRelayAgentL2Option82Removed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of packets that have had option 82 removed."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 3 }
+
+ cienaCesDhcpRelayAgentL2UntrustedClientPortPktsRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of packets received on untrusted client ports."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 4 }
+
+ cienaCesDhcpRelayAgentL2UntrustedServerPortPktsRx OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of packets received from untrusted server ports."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 5 }
+
+ cienaCesDhcpRelayAgentL2SpoofedDhcpPkts OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of spoofed DHCP packets."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 6 }
+
+ cienaCesDhcpRelayAgentL2Option82ExceedMTU OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of packets with DHCP option
+ 82 that would exceed the MTU. The option 82 is not added and the
+ original DHCP packet is forwarded."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 7 }
+
+ cienaCesDhcpRelayAgentL2NoTrustedServerPktDrop OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of DHCP packets dropped because there are no server trusted ports configured."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 8 }
+
+ cienaCesDhcpRelayAgentL2NoTrustedClientPktDrop OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of DHCP packets dropped because there are no client trusted ports configured."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 9 }
+
+ cienaCesDhcpRelayAgentL2InvalidConfigPktDrop OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of DHCP packets dropped
+ because the L2 relay agent configuration is invalid."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 10 }
+
+ cienaCesDhcpRelayAgentL2GeneralErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of general errors encountered by the L2 relay agent."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 11 }
+
+ cienaCesDhcpRelayAgentL2Option82Replaced OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of packets that have had option 82 replaced."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 12 }
+
+ cienaCesDhcpRelayAgentL2ForRelay OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of packets received by the
+ relay that were actually intended for the relay."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 13 }
+
+ cienaCesDhcpRelayAgentL2ClientRelayed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of client messages relayed."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 14 }
+
+ cienaCesDhcpRelayAgentL2ServerRelayed OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This MIB object reports the number of server messages relayed."
+ ::= { cienaCesDhcpRelayAgentL2StatsEntry 15 }
+
+ END
+
+ --
+ -- CIENA-CES-DHCP-RELAY-MIB.my
+ --
|