diff options
Diffstat (limited to 'MIBS/cisco/CISCO-AAA-SERVER-MIB')
| -rw-r--r-- | MIBS/cisco/CISCO-AAA-SERVER-MIB | 1031 |
1 files changed, 1031 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-AAA-SERVER-MIB b/MIBS/cisco/CISCO-AAA-SERVER-MIB new file mode 100644 index 0000000..d2d3d0d --- /dev/null +++ b/MIBS/cisco/CISCO-AAA-SERVER-MIB @@ -0,0 +1,1031 @@ +-- ***************************************************************** +-- CISCO-AAA-SERVER-MIB.my: Cisco AAA Server MIB file. +-- +-- Copyright (c) 1999-2003 by cisco Systems, Inc. +-- All rights reserved. +-- ***************************************************************** + + + +CISCO-AAA-SERVER-MIB DEFINITIONS ::= BEGIN + + +IMPORTS + MODULE-IDENTITY, + NOTIFICATION-TYPE, + OBJECT-TYPE, + Counter32, + IpAddress, Unsigned32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + TimeInterval, DisplayString, + TruthValue, RowStatus, + TEXTUAL-CONVENTION + FROM SNMPv2-TC + ciscoExperiment + FROM CISCO-SMI; + + +ciscoAAAServerMIB MODULE-IDENTITY + LAST-UPDATED "200311170000Z" + ORGANIZATION "Cisco Systems, Inc." + CONTACT-INFO + " Cisco Systems + Customer Service + + Postal: 170 W Tasman Drive + San Jose, CA 95134 + USA + + Tel: +1 800 553-NETS + + E-mail: cs-aaa@cisco.com" + DESCRIPTION + "The MIB module for monitoring communications and status + of AAA Server operation + " + REVISION "200311170000Z" + DESCRIPTION + "Expanded the list of AAA protocols to include LDAP, + Kerberos, NTLM and SDI; defined textual convention + CiscoAAAProtocol to denote the type of AAA protocols. + " + + REVISION "200203280000Z" + DESCRIPTION + "Imported Unsigned32 from SNMPv2-SMI instead of + CISCO-TC" + REVISION "200001200000Z" + DESCRIPTION + "Added objects to support AAA server configuration + casConfigTable + casProtocol + casIndex + casAddress + casAuthenPort + casAcctPort + casConfigRowStatus + " + ::= { ciscoExperiment 56 } + + + +-- Overview of AAA Server MIB +-- +-- MIB description +-- +-- +-- This MIB provides configuration and statistics reflecting the state +-- of AAA Server operation within the device and AAA communications +-- with external servers. +-- +-- AAA stands for authentication, authorization, and accounting +-- +-- The AAA Server MIB provides the following information: +-- 1) A Table for configuring AAA servers +-- 2) Identities of external AAA servers +-- 3) Distinct statistics for each AAA function +-- 4) Status of servers providing AAA functions +-- +-- A server is defined as a logical entity which provides any +-- of the three AAA functions. A TACACS+ server consists of +-- all three functions with a single IP address and single TCP +-- port. A RADIUS server consists of the authentication/accounting +-- pair with a single IP address but distinct UDP ports, or +-- it may be just one of authentication or accounting. It is +-- possible to have two distinct RADIUS servers at the same IP +-- address, one providing authentication only, the other accounting +-- only. +-- + +-- +++++++++++++++++++++++++++++++++++++++++++++++++++ +-- Local Textual Conventions +-- +++++++++++++++++++++++++++++++++++++++++++++++++++ + +CiscoAAAProtocol ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Protocol used with this server. + tacacsplus(1) - TACACS+ + + radius(2) - RADIUS + + ldap(3) - Light Weight Directory Protocol + + kerberos(4) - Kerberos + + ntlm(5) - Authentication/Authorization using + NT Domain + + sdi(6) - Authentication/Authorization using + Secure ID + + other(7) - Other protocols + " + REFERENCE + " + RFC 2138 Remote Authentication Dial In User Service + (RADIUS) + RFC 2139 RADIUS Accounting + The TACACS+ Protocol Version 1.78, Internet Draft + " + SYNTAX INTEGER { + tacacsplus(1), + radius(2), + ldap(3), + kerberos(4), + ntlm(5), + sdi(6), + other(7) + } + + +-- AAA Server MIB object definitions + +cAAAServerMIBObjects OBJECT IDENTIFIER ::= { ciscoAAAServerMIB 1 } + + +-- Configuration objects + +casConfig OBJECT IDENTIFIER ::= { cAAAServerMIBObjects 1 } + + +-- Statistics objects + +casStatistics OBJECT IDENTIFIER ::= { cAAAServerMIBObjects 2 } + + + +-- +-- Notification Configuration +-- + +casServerStateChangeEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable controls the generation of + casServerStateChange notification. + + When this variable is true(1), generation of + casServerStateChange notifications is enabled. + When this variable is false(2), generation of + casServerStateChange notifications is disabled. + + The default value is false(2). + " + ::= { casConfig 1 } + +-- +-- Server Configuration Table +-- + +casConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CasConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table shows current configurations for each + AAA server, allows existing servers to be removed + and new ones to be created. + " + ::= { casConfig 2 } + +casConfigEntry OBJECT-TYPE + SYNTAX CasConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An AAA server configuration identified by its protocol + and its index. + + An entry is created/removed when a server is defined + or undefined with IOS configuration commands via + CLI or by issuing appropriate sets to this table + using snmp. + + A management station wishing to create an entry should + first generate a random number to be used as the index + to this sparse table. The station should then create the + associated instance of the row status and row index objects. + It must also, either in the same or in successive PDUs, + create an instance of casAddress where casAddress is the + IP address of the server to be added. + + It should also modify the default values for casAuthenPort, + casAcctPort if the defaults are not appropriate. + + If casKey is a zero-length string or is not explicitly set, + then the global key will be used. Otherwise, this value + is used as the key for this server instance. + + Once the appropriate instance of all the configuration + objects have been created, either by an explicit SNMP set + request or by default, the row status should be set to + active(1) to initiate the request. + + After the AAA server is made active, the entry can not be + modified - the only allowed operation after this is to + destroy the entry by setting casConfigRowStatus to destroy(6). + + casPriority is automatically assigned once the entry is + made active and reflects the relative priority of the + defined server with respect to already configured servers. + Newly-created servers will be assigned the lowest priority. + To reassign server priorities to existing server entries, + it may be necessary to destroy and recreate entries in order + of priority. + + Entries in this table with casConfigRowStatus equal to + active(1) remain in the table until destroyed. + + Entries in this table with casConfigRowStatus equal to + values other than active(1) will be destroyed after timeout + (5 minutes). + + If a server address being created via SNMP exists already + in another active casConfigEntry, then a newly created row + can not be made active until the original row with the + with the same server address value is destroyed. + + Upon reload, casIndex values may be changed, but the + priorities that were saved before reload will be retained, + with lowest priority number corresponding to the higher + priority servers. + " + INDEX { casProtocol, + casIndex } + ::= { casConfigTable 1} + +CasConfigEntry ::= + SEQUENCE { + casProtocol CiscoAAAProtocol, + casIndex Unsigned32, + casAddress IpAddress, + casAuthenPort INTEGER, + casAcctPort INTEGER, + casKey DisplayString, + casPriority Unsigned32, + casConfigRowStatus RowStatus + } + +casProtocol OBJECT-TYPE + SYNTAX CiscoAAAProtocol + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The variable denotes the protocol used by the + managed device with the AAA server corresponding to + this entry in the table. + " + ::= { casConfigEntry 1 } + +casIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A management station wishing to initiate a new AAA server + configuration should use a random value for this object + when creating an instance of casConfigEntry. + + The RowStatus semantics of the casConfigRowStatus object + will prevent access conflicts. + + If the randomly chosen casIndex value for row creation + is already in use by an existing entry, snmp set to the + casIndex value will fail. + " + + ::= { casConfigEntry 2 } + +casAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP address of the server. + " + + ::= { casConfigEntry 3 } + +casAuthenPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "UDP/TCP port used for authentication in the configuration + + For TACACS+, this object should be explictly set. + + Default value is the IOS default for radius: 1645. + " + DEFVAL { 1645 } + ::= { casConfigEntry 4 } + +casAcctPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "UDP/TCP port used for accounting service in the configuration + + For TACACS+, the value of casAcctPort is ignored. + casAuthenPort will be used instead. + + Default value is the IOS default for radius: 1646. + " + DEFVAL { 1646 } + ::= { casConfigEntry 5 } + +casKey OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The server key to be used with this server. + + Retrieving the value of this object via SNMP will + return an empty string for security reasons. + " + DEFVAL { "" } + ::= { casConfigEntry 6 } + +casPriority OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A number that indicates the priority of the server in + this entry. Lower numbers indicate higher priority. + " + ::= { casConfigEntry 7 } + + +casConfigRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this table entry. Once the entry status is + set to active, the associated entry cannot be modified + except destroyed by setting this object to destroy(6). + " + ::= { casConfigEntry 8 } + +-- +-- Server Statistics +-- + +casStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CasStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Table providing statistics for each server. + " + ::= { casStatistics 1 } + +casStatisticsEntry OBJECT-TYPE + SYNTAX CasStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Statistical information about a particular server. + + Objects in this table are read-only and appear + automatically whenever a row in the casConfigTable + is made active. + + Objects in this table disappear when casConfigRowStatus + for the corresponding casConfigEntry is set to the + destroy(6) state. + " + AUGMENTS { casConfigEntry } + ::= { casStatisticsTable 1 } + +CasStatisticsEntry::= + SEQUENCE { + casAuthenRequests Counter32, + casAuthenRequestTimeouts Counter32, + casAuthenUnexpectedResponses Counter32, + casAuthenServerErrorResponses Counter32, + casAuthenIncorrectResponses Counter32, + casAuthenResponseTime TimeInterval, + casAuthenTransactionSuccesses Counter32, + casAuthenTransactionFailures Counter32, + casAuthorRequests Counter32, + casAuthorRequestTimeouts Counter32, + casAuthorUnexpectedResponses Counter32, + casAuthorServerErrorResponses Counter32, + casAuthorIncorrectResponses Counter32, + casAuthorResponseTime TimeInterval, + casAuthorTransactionSuccesses Counter32, + casAuthorTransactionFailures Counter32, + casAcctRequests Counter32, + casAcctRequestTimeouts Counter32, + casAcctUnexpectedResponses Counter32, + casAcctServerErrorResponses Counter32, + casAcctIncorrectResponses Counter32, + casAcctResponseTime TimeInterval, + casAcctTransactionSuccesses Counter32, + casAcctTransactionFailures Counter32, + casState INTEGER, + casCurrentStateDuration TimeInterval, + casPreviousStateDuration TimeInterval, + casTotalDeadTime TimeInterval, + casDeadCount Counter32 + } + +-- +-- Authentication statistics +-- + +casAuthenRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authentication requests sent to + this server since it is made active. + + Retransmissions due to request timeouts are + counted as distinct requests. + " + ::= { casStatisticsEntry 1 } + +casAuthenRequestTimeouts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authentication requests which have + timed out since it is made active. + + A timeout results in a retransmission of the request + If the maximum number of attempts has been reached, + no further retransmissions will be attempted. + " + ::= { casStatisticsEntry 2 } + +casAuthenUnexpectedResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of unexpected authentication responses received + from this server since it is made active. + + An example is a delayed response to a request which had + already timed out. + " + ::= { casStatisticsEntry 3 } + +casAuthenServerErrorResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of server ERROR authentication responses + received from this server since it is made active. + + These are responses indicating that the server itself + has identified an error with its authentication + operation. + " + ::= { casStatisticsEntry 4 } + +casAuthenIncorrectResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authentication responses which could not + be processed since it is made active. + + Reasons include inability to decrypt the response, + invalid fields, or the response is not valid based on + the request. + " + ::= { casStatisticsEntry 5 } + +casAuthenResponseTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average response time for authentication requests sent + to this server, excluding timeouts, since system + re-initialization. + " + ::= { casStatisticsEntry 6 } + +casAuthenTransactionSuccesses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authentication transactions with this + server which succeeded since it is made active. + + A transaction may include multiple request + retransmissions if timeouts occur. + + A transaction is successful if the server responds + with either an authentication pass or fail. + " + ::= { casStatisticsEntry 7 } + +casAuthenTransactionFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authentication transactions with this + server which failed since it is made active. + + A transaction may include multiple request + retransmissions if timeouts occur. + + A transaction failure occurs if maximum resends have + been met or the server aborts the transaction. + " + ::= { casStatisticsEntry 8 } + +-- +-- Authorization statistics +-- + +casAuthorRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authorization requests sent to + this server since it is made active. + + Retransmissions due to request timeouts are + counted as distinct requests. + + This object is not instantiated for protocols which do + not support a distinct authorization function. + " + ::= { casStatisticsEntry 9 } + +casAuthorRequestTimeouts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authorization requests which have + timed out since it is made active. + + A timeout results in a retransmission of the request + If the maximum number of attempts has been reached, + no further retransmissions will be attempted. + + This object is not instantiated for protocols which do + not support a distinct authorization function. + " + ::= { casStatisticsEntry 10 } + +casAuthorUnexpectedResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of unexpected authorization responses received + from this server since it is made active. + + An example is a delayed response to a request which + had already timed out. + + This object is not instantiated for protocols which do + not support a distinct authorization function. + " + ::= { casStatisticsEntry 11 } + +casAuthorServerErrorResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of server ERROR authorization responses + received from this server since it is made active. + + These are responses indicating that the server itself + has identified an error with its authorization + operation. + + This object is not instantiated for protocols which do + not support a distinct authorization function. + " + ::= { casStatisticsEntry 12 } + +casAuthorIncorrectResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authorization responses which could not + be processed since it is made active. + + Reasons include inability to decrypt the response, + invalid fields, or the response is not valid based on + the request. + + This object is not instantiated for protocols which do + not support a distinct authorization function. + " + ::= { casStatisticsEntry 13 } + +casAuthorResponseTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average response time for authorization requests sent + to this server, excluding timeouts, since system + re-initialization. + + This object is not instantiated for protocols which do + not support a distinct authorization function. + " + ::= { casStatisticsEntry 14 } + +casAuthorTransactionSuccesses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authorization transactions with this + server which succeeded since it is made active. + + A transaction may include multiple request + retransmissions if timeouts occur. + + A transaction is successful if the server responds + with either an authorization pass or fail. + + This object is not instantiated for protocols which do + not support a distinct authorization function. + " + ::= { casStatisticsEntry 15 } + +casAuthorTransactionFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of authorization transactions with this + server which failed since it is made active. + + A transaction may include multiple request + retransmissions if timeouts occur. + + A transaction failure occurs if maximum resends have + been met or the server aborts the transaction. + + This object is not instantiated for protocols which do + not support a distinct authorization function. + " + ::= { casStatisticsEntry 16 } + +-- +-- Accounting statistics +-- + +casAcctRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of accounting requests sent to + this server since system re-initialization. + + Retransmissions due to request timeouts are + counted as distinct requests. + " + ::= { casStatisticsEntry 17 } + +casAcctRequestTimeouts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of accounting requests which have + timed out since system re-initialization. + + A timeout results in a retransmission of the request + If the maximum number of attempts has been reached, + no further retransmissions will be attempted. + + " + ::= { casStatisticsEntry 18 } + +casAcctUnexpectedResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of unexpected accounting responses received + from this server since system re-initialization. + + An example is a delayed response to a request which had + already timed out. + " + ::= { casStatisticsEntry 19 } + +casAcctServerErrorResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of server ERROR accounting responses received + from this server since system re-initialization. + + These are responses indicating that the server itself + has identified an error with its accounting + operation. + " + ::= { casStatisticsEntry 20 } + +casAcctIncorrectResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of accounting responses which could not + be processed since system re-initialization. + + Reasons include inability to decrypt the response, + invalid fields, or the response is not valid based on + the request. + " + ::= { casStatisticsEntry 21 } + +casAcctResponseTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average response time for accounting requests sent + to this server,, since system re-initialization + excluding timeouts. + " + ::= { casStatisticsEntry 22 } + +casAcctTransactionSuccesses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of accounting transactions with this + server which succeeded since system re-initialization. + + A transaction may include multiple request + retransmissions if timeouts occur. + + A transaction is successful if the server responds + with either an accounting pass or fail. + " + ::= { casStatisticsEntry 23 } + +casAcctTransactionFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of accounting transactions with this + server which failed since system re-initialization. + + A transaction may include multiple request + retransmissions if timeouts occur. + + A transaction failure occurs if maximum resends have + been met or the server aborts the transaction. + " + ::= { casStatisticsEntry 24 } + +-- +-- Server availability +-- + +casState OBJECT-TYPE + SYNTAX INTEGER { + up(1), + dead(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current state of this server. + + up(1) - Server responding to requests + + dead(2) - Server failed to respond + + A server is marked dead if it does not respond after + maximum retransmissions. + + A server is marked up again either after a waiting + period or if some response is received from it. + + The initial value of casState is 'up(1)' at system + re-initialization. This will only transistion to 'dead(2)' + if an attempt to communicate fails. + " + ::= { casStatisticsEntry 25 } + +casCurrentStateDuration OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the elapsed time the server has + been in its current state as shown in casState. + " + ::= { casStatisticsEntry 26 } + +casPreviousStateDuration OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the elapsed time the server was + been in its previous state prior to the most recent + transistion of casState. + + This value is zero if the server has not changed state. + " + ::= { casStatisticsEntry 27 } + +casTotalDeadTime OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total elapsed time this server's casState has + had the value 'dead(2)' since system re-initialization. + " + ::= { casStatisticsEntry 28 } + +casDeadCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this server's casState has + transitioned to 'dead(2)' since system re-initialization. + " + ::= { casStatisticsEntry 29 } + + + + +-- ****************************************************************** +-- Notifications +-- ****************************************************************** +cAAAServerMIBNotificationPrefix OBJECT IDENTIFIER ::= + { ciscoAAAServerMIB 2 } + +cAAAServerMIBNotifications OBJECT IDENTIFIER ::= + { cAAAServerMIBNotificationPrefix 0 } + +casServerStateChange NOTIFICATION-TYPE + OBJECTS { casState, + casPreviousStateDuration, + casTotalDeadTime } + STATUS current + DESCRIPTION + "An AAA server state change notification is generated + whenever casState changes value. + " + ::= { cAAAServerMIBNotifications 1 } + + + +-- ****************************************************************** +-- Conformance and Compliance +-- ****************************************************************** +cAAAServerMIBConformance OBJECT IDENTIFIER ::= { ciscoAAAServerMIB 3 } + +casMIBCompliances OBJECT IDENTIFIER ::= { cAAAServerMIBConformance 1 } +casMIBGroups OBJECT IDENTIFIER ::= { cAAAServerMIBConformance 2 } + +-- compliance statements + +casMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which + implement the CISCO AAA Server MIB" + MODULE -- this module + MANDATORY-GROUPS + { + casConfigGroup, + casStatisticsGroup, + casServerNotificationGroup + } + + OBJECT casAddress + MIN-ACCESS read-only + DESCRIPTION + "Create/Write access is not required." + + OBJECT casAuthenPort + MIN-ACCESS read-only + DESCRIPTION + "Create/Write access is not required." + + OBJECT casAcctPort + MIN-ACCESS read-only + DESCRIPTION + "Create/Write access is not required." + + OBJECT casKey + MIN-ACCESS read-only + DESCRIPTION + "Create/Write access is not required." + + OBJECT casConfigRowStatus + MIN-ACCESS read-only + DESCRIPTION + "Create/Write access is not required." + + + ::= { casMIBCompliances 1 } + + +-- units of conformance + +casStatisticsGroup OBJECT-GROUP + OBJECTS { + casAuthenRequests, + casAuthenRequestTimeouts, + casAuthenUnexpectedResponses, + casAuthenServerErrorResponses, + casAuthenIncorrectResponses, + casAuthenResponseTime, + casAuthenTransactionSuccesses, + casAuthenTransactionFailures, + casAuthorRequests, + casAuthorRequestTimeouts, + casAuthorUnexpectedResponses, + casAuthorServerErrorResponses, + casAuthorIncorrectResponses, + casAuthorResponseTime, + casAuthorTransactionSuccesses, + casAuthorTransactionFailures, + casAcctRequests, + casAcctRequestTimeouts, + casAcctUnexpectedResponses, + casAcctServerErrorResponses, + casAcctIncorrectResponses, + casAcctResponseTime, + casAcctTransactionSuccesses, + casAcctTransactionFailures, + casState, + casCurrentStateDuration, + casPreviousStateDuration, + casTotalDeadTime, + casDeadCount + } + STATUS current + DESCRIPTION + "Objects for providing AAA server statistics and status. + " + ::= { casMIBGroups 1 } + +casConfigGroup OBJECT-GROUP + OBJECTS { + casServerStateChangeEnable, + casAddress, + casAuthenPort, + casAcctPort, + casKey, + casPriority, + casConfigRowStatus + } + STATUS current + DESCRIPTION + "Objects for configuring the AAA servers. + " + ::= { casMIBGroups 2 } + +casServerNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { casServerStateChange } + STATUS current + DESCRIPTION + "The collection of notifications used for + monitoring AAA server status" + ::= { casMIBGroups 3 } + + + +END + |