diff options
Diffstat (limited to 'MIBS/cisco/CISCO-ENTITY-EXT-MIB')
| -rw-r--r-- | MIBS/cisco/CISCO-ENTITY-EXT-MIB | 1445 |
1 files changed, 1445 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-ENTITY-EXT-MIB b/MIBS/cisco/CISCO-ENTITY-EXT-MIB new file mode 100644 index 0000000..9be1030 --- /dev/null +++ b/MIBS/cisco/CISCO-ENTITY-EXT-MIB @@ -0,0 +1,1445 @@ +-- ***************************************************************** +-- CISCO-ENTITY-EXT-MIB.my +-- +-- Cisco Extension to ENTITY-MIB(RFC2737) +-- +-- April 2001, A S Kiran Koushik +-- May 2004, Arul Mozhi +-- Mar 2015, Neha Jagtap +-- +-- Copyright (c) 2001-2018 by cisco Systems Inc. +-- All rights reserved. +-- +-- ***************************************************************** + +CISCO-ENTITY-EXT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + Unsigned32, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP, + NOTIFICATION-GROUP + FROM SNMPv2-CONF + TEXTUAL-CONVENTION, + TruthValue + FROM SNMPv2-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + entPhysicalIndex, + entPhysicalEntry, + entPhysicalDescr, + entPhysicalName, + entPhysicalContainedIn + FROM ENTITY-MIB + Unsigned64 + FROM CISCO-TC + ciscoMgmt + FROM CISCO-SMI; + + +ciscoEntityExtMIB MODULE-IDENTITY + LAST-UPDATED "201804040000Z" + ORGANIZATION "Cisco Systems, Inc." + CONTACT-INFO + "Cisco Systems + Customer Service + + Postal: 170 W. Tasman Drive + San Jose, CA 95134 + USA + + Tel: +1 800 553-NETS + + E-mail: cs-snmp@cisco.com" + DESCRIPTION + "This MIB is an extension of the ENTITY-MIB + specified in RFC2737. + + This MIB module contains Cisco-defined extensions + to the entityPhysicalTable to represent information + related to entities of class module(entPhysicalClass + = 'module') which have a Processor. + + A processor module is defined as a physical entity + that has a CPU, RAM and NVRAM so that + it can independently + - load a bootable image + - save configuration. + This module is the entry point for external + applications like SNMP Manager, CLI, FTP etc. + + Line card is an interface card with at least a + Processor and RAM. This might be referred to as + Service Module in some cisco products. + + A configuration register is a 16 bit + software register. + The configuration register is mainly used to + check for instructions on where to find the Cisco + Operating System software. + Some other functions of configuration register are: + - To select a boot source and default boot filename. + - To enable or disable the Break function. + - To control broadcast addresses. + - To set the console terminal baud rate. + - To load operating software from Flash memory. + - To allow us to manually boot the system using the + boot command at the bootstrap program prompt. + + Booting is the process of initializing the + hardware and starting the Operating System." + REVISION "201804040000Z" + DESCRIPTION + "Added the following groups OBJECT-GROUP + ceExtNVRAMOverflowGroup + ceExtHCNVRAMGroup" + REVISION "201504170000Z" + DESCRIPTION + "Added ceExtUSBModemTable, + ceExtUSBModemPlugInNotif, ceExtUSBModemPlugOutNotif, + ceExtEntUsbModemNotifEnable." + REVISION "201409120000Z" + DESCRIPTION + "Changed the description ceExtEntDoorOpenNotif to + include ceExtEntDoorOpenNotif instead + of ceExtEntDoorCloseNotif." + REVISION "201403270000Z" + DESCRIPTION + "Changed the Max Access of ceExtEntDoorNotifEnable from + read-only to read-write." + REVISION "201308060000Z" + DESCRIPTION + "Added following object to ciscoEntityExtMIBNotifications + ceExtBreakOutPortInserted + ceExtBreakOutPortRemoved + + Added following object to ceExtNotificationControlObjects + ceExtBreakOutPortNotifEnable + + Added the following new groups to ciscoEntityExtMIBGroups + ceExtBreakOutPortNotifGroup + ceExtBreakOutPortNotifControlGroup. + + Added a new compliance ciscoEntityExtMIBComplianceRev5 which + deprecates ciscoEntityExtMIBComplianceRev4 + + A port can be configured to act as multiple interfaces. + Ex: One Hundred GigE port can act as 10 TenGigE interface + Breakout is the term that can be used to define this behaviour. + Alternatively slice term is also used. + + When a breakout config is applied on the interface, the base + interface will be replaced with multiple breakout interfaces. + Reference to the base interface will be removed from the system + and breakout interface will be made available. Vice versa will + happen when breakout config will be removed from the system." + REVISION "201308050000Z" + DESCRIPTION + "Added following new objects to ciscoEntityExtMIBNotifications. + ceExtEntDoorCloseNotif + ceExtEntDoorOpenNotif + + Added following new groups to ciscoEntityExtMIBGroups. + ceExtNotificationControlObjects. + + Added following new objects to ceExtNotificationControlObjects + ceExtEntDoorNotifEnable. + + Added the following new groups to ciscoEntityExtMIBGroups + ceExtEntDoorNotifGroup + ceExtEntDoorNotifControlGroup. + + Added a new compliance ciscoEntityExtMIBComplianceRev4 which + deprecates ciscoEntityExtMIBComplianceRev3." + REVISION "200811240000Z" + DESCRIPTION + "Added following new objects to ceExtPhysicalProcessorTable. + ceExtProcessorRamOverflow and ceExtHCProcessorRam + + Added following new groups to ciscoEntityExtMIBGroups. + ceExtPhyProcessorOverflowGroup and ceExtPhyProcessorHCGroup. + + Added a new compliance ciscoEntityExtMIBComplianceRev3 which + deprecates ciscoEntityExtMIBComplianceRev2." + REVISION "200407060000Z" + DESCRIPTION + "Added a new table object 'ceExtEntPhysicalTable' ." + REVISION "200403030000Z" + DESCRIPTION + "Importing Unsigned32 from SNMPv2-SMI, instead of CISCO-TC." + REVISION "200401260000Z" + DESCRIPTION + "Added new enum to ceExtEntityLEDType." + REVISION "200308240000Z" + DESCRIPTION + "Added ceExtEntityLEDTable. Added ceExtKickstartImageList to + ceExtConfigRegTable. + Added new group ciscoEntityExtLEDGroup. + Added group ceExtSysBootImageListGroupRev1." + REVISION "200105170000Z" + DESCRIPTION + "Corrected the description for the TC + ConfigRegisterValue." + REVISION "200104050000Z" + DESCRIPTION + "Initial version of this MIB module." + ::= { ciscoMgmt 195 } + + +ciscoEntityExtMIBObjects OBJECT IDENTIFIER + ::= { ciscoEntityExtMIB 1 } + + +-- textual conventions + +ConfigRegisterValue ::= TEXTUAL-CONVENTION + DISPLAY-HINT "2x" + STATUS current + DESCRIPTION + "An Integer containing the value of config register. + + The definition of individual bits from right to left + when set are as follows: + + 00 to + 03 Boot Fields(Refer below for + explanation). + + 04 to + 05 Not Used. + + 06 Causes system software to ignore the + contents of NVRAM. + + 07 Enable the original equipment + manufacturer (OEM) bit. + + 08 The Break function is disabled. + + 09 Not used. + + 10 Broadcast based on 0.0.0.0 IP address. + + 11 to + 12 Defines the console baud rate as below: + Bits 11 & 12 unset: 9600 baud(default), + Bit 11 set & 12 unset: 4800 baud, + Bit 11 unset & 12 set: 1200 baud, + Bit 11 set & 12 set: 2400 baud + + 13 Boots default Flash software if + network boot fails. + + 14 IP broadcasts do not have network + numbers. + + 15 Enables diagnostic messages and ignores + the contents of NVRAM. + + + Meanings for different values of Boot Fields + (Bits 00 to 03) are explained below: + + Value(in hex) Description + ------------ ----------- + 00 On powerup or reload, the system + remains at the ROM monitor prompt + (rommon>), awaiting a user command + to boot the system manually by means + of the rommon boot command. + + 01 On powerup or reload, the system loads + the system image found in onboard + Flash memory. + + 02 to On powerup or reload, the system loads + 0F the system image specified by + ceExtSysBootImageList. + It tries to boot the + image in the order in which + the image names are entered in + ceExtSysBootImageList. If + it cannot boot any image in the + ceExtSysBootImageList, it + stays in ROM monitor mode." + SYNTAX OCTET STRING (SIZE (2)) + +BootImageList ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This contains a list of boot images, + each separated by the ';' (semi-colon) character. + The following provides a syntax for parsing a single + boot image list item. + + <device>:[filename] | <URL> + + <device> can be (but not limited to): + flash, bootflash, slot0, rom, C + The transfer protocol used in the <URL> + can be (but not limited to): + tftp, ftp, rcp, mop. + + The following is en example containing two boot image + names: + disk0:c7100-ik2s-mz;tftp://dirt/c7100-ik2s-mz + + If the filename is not specified, then the + first file on the <device> will be used. + + If the last two characters in the returned value + are ';+' this indicates that additional boot image + items are configured on the device but can not + be returned because the maximum string size limitation + would be exceeded. + + For example: + disk0:image1;disk0:image2;+" + SYNTAX OCTET STRING (SIZE (0..255)) +-- ceExtPhysicalProcessorTable + +ceExtPhysicalProcessorTable OBJECT-TYPE + SYNTAX SEQUENCE OF CeExtPhysicalProcessorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ceExtPhysicalProcessorTable extends + the ENTITY-MIB entPhysicalTable for modules + (Non FRUs(Field Replacable Units) or FRUs)." + REFERENCE "RFC2737: Section 2.12.1" + ::= { ciscoEntityExtMIBObjects 1 } + +ceExtPhysicalProcessorEntry OBJECT-TYPE + SYNTAX CeExtPhysicalProcessorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A ceExtPhysicalProcessorTable entry extends + a corresponding entPhysicalTable entry of class + module(entPhysicalClass = 'module'). + + A processor module or line card which + has a processor will have an entry in + this table. + + A processor module or line card having + multiple processors and is a SMP(Symmetric + multi processor) system will have only + one entry corresponding to all the processors + since the resources defined below are shared. + + A processor module or line card having + multiple processors and is not an SMP system + would register the processors as separate entities. + + Entries are created by the agent at the system power-up + or module insertion. + + Entries are removed when the module is reset or removed." + INDEX { entPhysicalIndex } + ::= { ceExtPhysicalProcessorTable 1 } + +CeExtPhysicalProcessorEntry ::= SEQUENCE { + ceExtProcessorRam Unsigned32, + ceExtNVRAMSize Unsigned32, + ceExtNVRAMUsed Unsigned32, + ceExtProcessorRamOverflow Unsigned32, + ceExtHCProcessorRam Unsigned64, + ceExtNVRAMSizeOverflow Unsigned32, + ceExtHCNVRAMSize Unsigned64, + ceExtNVRAMUsedOverflow Unsigned32, + ceExtHCNVRAMUsed Unsigned64 +} + +ceExtProcessorRam OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of bytes of RAM available on the + Processor." + ::= { ceExtPhysicalProcessorEntry 1 } + +ceExtNVRAMSize OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of bytes of NVRAM in the entity. + + A value of 0 for this object means the entity + does not support NVRAM or NVRAM information + is not available." + ::= { ceExtPhysicalProcessorEntry 2 } + +ceExtNVRAMUsed OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bytes of NVRAM in use. This object + is irrelevant if ceExtNVRAMSize is 0." + ::= { ceExtPhysicalProcessorEntry 3 } + +ceExtProcessorRamOverflow OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the upper 32-bit of ceExtProcessorRam. + This object needs to be supported only if the available RAM + bytes exceeds 32-bit, otherwise this object value would be set + to 0." + ::= { ceExtPhysicalProcessorEntry 4 } + +ceExtHCProcessorRam OBJECT-TYPE + SYNTAX Unsigned64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the total number of bytes of RAM + available on the Processor. This object is a 64-bit version + of ceExtProcessorRam." + ::= { ceExtPhysicalProcessorEntry 5 } + +ceExtNVRAMSizeOverflow OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the upper 32-bit of ceExtNVRAMSize. + This object needs to be supported only if the available NVRAM + bytes exceeds 32-bit, otherwise this object value would be set + to 0." + ::= { ceExtPhysicalProcessorEntry 6 } + +ceExtHCNVRAMSize OBJECT-TYPE + SYNTAX Unsigned64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the total number of bytes of NVRAM + available on the Processor. This object is a 64-bit version + of ceExtNVRAMSize." + ::= { ceExtPhysicalProcessorEntry 7 } + +ceExtNVRAMUsedOverflow OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the upper 32-bit of ceExtNVRAMUsed. + This object needs to be supported only if the used NVRAM + bytes exceeds 32-bit, otherwise this object value would be set + to 0." + ::= { ceExtPhysicalProcessorEntry 8 } + +ceExtHCNVRAMUsed OBJECT-TYPE + SYNTAX Unsigned64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of bytes of NVRAM used + on the Processor. This object is a 64-bit version of + ceExtHCNVRAMUsed." + ::= { ceExtPhysicalProcessorEntry 9 } + +ceExtConfigRegTable OBJECT-TYPE + SYNTAX SEQUENCE OF CeExtConfigRegEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ceExtConfigRegTable extends + the ENTITY-MIB entPhysicalTable." + REFERENCE "RFC2737: Section 2.12.1" + ::= { ciscoEntityExtMIBObjects 2 } + +ceExtConfigRegEntry OBJECT-TYPE + SYNTAX CeExtConfigRegEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A ceExtConfigRegTable entry extends + a corresponding entPhysicalTable entry of class + module which has a configuration register. + + Entries are created by the agent at the system power-up + or module insertion. + + Entries are removed when the module is reset or + removed." + INDEX { entPhysicalIndex } + ::= { ceExtConfigRegTable 1 } + +CeExtConfigRegEntry ::= SEQUENCE { + ceExtConfigRegister ConfigRegisterValue, + ceExtConfigRegNext ConfigRegisterValue, + ceExtSysBootImageList BootImageList, + ceExtKickstartImageList BootImageList +} + +ceExtConfigRegister OBJECT-TYPE + SYNTAX ConfigRegisterValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of configuration register with which + the processor module booted." + ::= { ceExtConfigRegEntry 1 } + +ceExtConfigRegNext OBJECT-TYPE + SYNTAX ConfigRegisterValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of configuration register in the + processor module at next reboot. Just after + the reboot this has the same value as + ceExtConfigRegister." + ::= { ceExtConfigRegEntry 2 } + +ceExtSysBootImageList OBJECT-TYPE + SYNTAX BootImageList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The list of system boot images which + can be used for booting." + DEFVAL { "" } + ::= { ceExtConfigRegEntry 3 } + +ceExtKickstartImageList OBJECT-TYPE + SYNTAX BootImageList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The list of system kickstart images which + can be used for booting." + DEFVAL { "" } + ::= { ceExtConfigRegEntry 4 } + + +-- ceExtEntityLEDTable + +ceExtEntityLEDTable OBJECT-TYPE + SYNTAX SEQUENCE OF CeExtEntityLEDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing information of LED on an entity." + ::= { ciscoEntityExtMIBObjects 3 } + +ceExtEntityLEDEntry OBJECT-TYPE + SYNTAX CeExtEntityLEDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (conceptual row) in the ceExtEntityLEDTable, + containing information about an LED on an entity, identified by + entPhysicalIndex." + INDEX { + entPhysicalIndex, + ceExtEntityLEDType + } + ::= { ceExtEntityLEDTable 1 } + +CeExtEntityLEDEntry ::= SEQUENCE { + ceExtEntityLEDType INTEGER, + ceExtEntityLEDColor INTEGER +} + +ceExtEntityLEDType OBJECT-TYPE + SYNTAX INTEGER { + status(1), + system(2), + active(3), + power(4), + battery(5) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of LED on this entity. + 'status' - indicates the entity status. + 'system' - indicates the overall system status. + 'active' - the redundancy status of a module, for e.g. + supervisor module. + 'power' - indicates sufficient power availability for all + modules. + 'battery'- indicates the battery status." + REFERENCE + "Cisco MDS 9500 Series Hardware Installation Guide, + Product Overview." + ::= { ceExtEntityLEDEntry 1 } + +ceExtEntityLEDColor OBJECT-TYPE + SYNTAX INTEGER { + off(1), + green(2), + amber(3), + red(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The color of the LED." + REFERENCE + "Cisco MDS 9500 Series Multilayer Switches, Product + Overview." + ::= { ceExtEntityLEDEntry 2 } + + +-- ceExtEntityPhysicalTable + +ceExtEntPhysicalTable OBJECT-TYPE + SYNTAX SEQUENCE OF CeExtEntPhysicalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains additional information about + a particular physical entity. + This table augments the 'entPhysicalTable' of + the ENTITY-MIB." + REFERENCE "RFC2737: Section 2.12.1" + ::= { ciscoEntityExtMIBObjects 4 } + +ceExtEntPhysicalEntry OBJECT-TYPE + SYNTAX CeExtEntPhysicalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (conceptual row) in the 'ceExtEntPhysicalTable', + containing additional information about a physical entity, + identified by 'entPhysicalIndex'." + AUGMENTS { entPhysicalEntry } + ::= { ceExtEntPhysicalTable 1 } + +CeExtEntPhysicalEntry ::= SEQUENCE { + ceEntPhysicalSecondSerialNum SnmpAdminString +} + +ceEntPhysicalSecondSerialNum OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the vendor-specific second + serial number string for the physical entity. + The first serial number string of the physical + entity is represented in the value of corresponding + instance of the 'entPhysicalSerialNum' object. + + On the first instantiation of an physical entity, the value + of this object is the correct vendor-assigned second + serial number, if this information is available to the agent. + + If the second serial number is unknown or non-existent, then + the value of this object will be a zero-length string instead. + + Note that implementations which can correctly identify the + second serial numbers of all installed physical entities do + not need to provide write access to this object. + Agents which cannot provide non-volatile storage for the + second serial number strings are not required to implement + write access for this object. + + Not every physical component will have a serial number, or + even need one. Physical entities for which the associated + value of the entPhysicalIsFRU object is equal to 'false(2)' + (e.g., the repeater ports within a repeater module), do not + need their own unique serial number. An agent does not have + to provide write access for such entities, and may return a + zero-length string. + + If write access is implemented for an instance of + 'ceEntPhysicalSecondSerialNum', and a value is written into + the instance, the agent must retain the supplied value in the + 'ceEntPhysicalSecondSerialNum' instance associated with the + same physical entity for as long as that entity remains + instantiated. This includes instantiations across all re- + initializations/reboots of the network management system, + including those which result in a change of the physical + entity's entPhysicalIndex value." + DEFVAL { "" } + ::= { ceExtEntPhysicalEntry 1 } + + +ceExtNotificationControlObjects OBJECT IDENTIFIER + ::= { ciscoEntityExtMIBObjects 5 } + + +ceExtEntDoorNotifEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object controls the generation of + ceExtEntDoorCloseNotif and ceExtEntDoorOpenNotif + notifications as follows: + 'true(1)' - the generation of ceExtEntDoorCloseNotif + and ceExtEntDoorOpenNotif + notifications are enabled. + 'false(2)' - the generation of ceExtEntDoorCloseNotif + and ceExtEntDoorOpenNotif + notifications are disabled." + DEFVAL { false } + ::= { ceExtNotificationControlObjects 1 } + +ceExtEntBreakOutPortNotifEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object controls the generation of + ceExtBreakOutPortInserted and + ceExtBreakOutPortRemoved as follows: + 'true(1)' - the generation of ceExtBreakOutPortInserted + and ceExtBreakOutPortRemoved + notifications is enabled. + 'false(2)' - the generation of ceExtBreakOutPortInserted + and ceExtBreakOutPortRemoved + notifications is disabled." + DEFVAL { false } + ::= { ceExtNotificationControlObjects 2 } + +ceExtEntUsbModemNotifEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object controls the generation of + ceExtUSBModemPlugInNotif and + ceExtUSBModemPlugOutNotif as follows: + 'true(1)' - the generation of ceExtUSBModemPlugInNotif + and ceExtUSBModemPlugOutNotif + notifications is enabled. + 'false(2)' - the generation of ceExtUSBModemPlugOutNotif + and ceExtUSBModemPlugOutNotif + notifications is disabled." + DEFVAL { false } + ::= { ceExtNotificationControlObjects 3 } +-- ceExtUSBModemTable + +ceExtUSBModemTable OBJECT-TYPE + SYNTAX SEQUENCE OF CeExtUSBModemEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing information of USB MODEMs on an entity." + ::= { ciscoEntityExtMIBObjects 6 } + +ceExtUSBModemEntry OBJECT-TYPE + SYNTAX CeExtUSBModemEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (conceptual row) in the ceExtUSBModemTable, + containing information about an USB MODEM on an entity, + identified by entPhysicalIndex." + INDEX { entPhysicalIndex } + ::= { ceExtUSBModemTable 1 } + +CeExtUSBModemEntry ::= SEQUENCE { + ceExtUSBModemIMEI SnmpAdminString, + ceExtUSBModemIMSI SnmpAdminString, + ceExtUSBModemServiceProvider SnmpAdminString, + ceExtUSBModemSignalStrength SnmpAdminString +} + +ceExtUSBModemIMEI OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The International Mobile Equipment Identifier (IMEI) of the + USB-MODEM" + REFERENCE "RFC 6155" + ::= { ceExtUSBModemEntry 1 } + +ceExtUSBModemIMSI OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The International Mobile Subscriber Identifier(IMSI) - + for a GSM USB MODEM." + REFERENCE "RFC 4186" + ::= { ceExtUSBModemEntry 2 } + +ceExtUSBModemServiceProvider OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Service Provider name for a USB MODEM." + ::= { ceExtUSBModemEntry 3 } + +ceExtUSBModemSignalStrength OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The signal strength of the USB MODEM." + ::= { ceExtUSBModemEntry 4 } + + +-- Notifications + +ceExtMIBNotificationPrefix OBJECT IDENTIFIER + ::= { ciscoEntityExtMIB 2 } + +ciscoEntityExtMIBNotifications OBJECT IDENTIFIER + ::= { ceExtMIBNotificationPrefix 0 } + + +ceExtEntDoorCloseNotif NOTIFICATION-TYPE + OBJECTS { + entPhysicalDescr, + entPhysicalName + } + STATUS current + DESCRIPTION + "A ceExtEntDoorCloseNotif is generated if the door of an entity + has been closed." + ::= { ciscoEntityExtMIBNotifications 1 } + +ceExtEntDoorOpenNotif NOTIFICATION-TYPE + OBJECTS { + entPhysicalDescr, + entPhysicalName + } + STATUS current + DESCRIPTION + "A ceExtEntDoorOpenNotif is generated if the door of an entity + has been opened." + ::= { ciscoEntityExtMIBNotifications 2 } + +ceExtBreakOutPortInserted NOTIFICATION-TYPE + OBJECTS { + entPhysicalContainedIn, + entPhysicalName + } + STATUS current + DESCRIPTION + "The ceExtBreakOutPortInserted notification indicates + that a Breakout port was inserted. The varbind for + this notification indicates the entPhysicalIndex of + the inserted Breakout port, and the entPhysicalIndex + of the BreakOut Port module that contains this port." + ::= { ciscoEntityExtMIBNotifications 3 } + +ceExtBreakOutPortRemoved NOTIFICATION-TYPE + OBJECTS { + entPhysicalContainedIn, + entPhysicalName + } + STATUS current + DESCRIPTION + "The ceExtBreakOutPortRemoved notification indicates + that a Breakout Port was removed. The varbind for this + notification indicates the entPhysicalIndex of the + removed Breakout port, and the entPhysicalIndex + of the BreakOut Port module that contains this port." + ::= { ciscoEntityExtMIBNotifications 4 } + +ceExtUSBModemPlugInNotif NOTIFICATION-TYPE + OBJECTS { + entPhysicalContainedIn, + entPhysicalDescr + } + STATUS current + DESCRIPTION + "The ceExtUSBModemPlugInNotif notification indicates that + a USB MODEM was inserted. The varbind for this notification + indicates the entPhysicalDescr of the inserted USB MODEM, + and the entPhysicalIndex of the USB MODEM's container." + ::= { ciscoEntityExtMIBNotifications 5 } + +ceExtUSBModemPlugOutNotif NOTIFICATION-TYPE + OBJECTS { + entPhysicalContainedIn, + entPhysicalDescr + } + STATUS current + DESCRIPTION + "The ceExtUSBModemPlugOutNotif notification indicates that + a USB MODEM was removed. The varbind for this notification + indicates the entPhysicalDescr of the removed USB MODEM, + and the entPhysicalIndex of the USB MODEM's container." + ::= { ciscoEntityExtMIBNotifications 6 } +-- conformance information + +ciscoEntityExtMIBConformance OBJECT IDENTIFIER + ::= { ciscoEntityExtMIB 3 } + +ciscoEntityExtMIBCompliances OBJECT IDENTIFIER + ::= { ciscoEntityExtMIBConformance 1 } + +ciscoEntityExtMIBGroups OBJECT IDENTIFIER + ::= { ciscoEntityExtMIBConformance 2 } + + +-- compliance statements + +ciscoEntityExtMIBCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "Compliance for SNMP Entities which support modules + with CPU, NVRAM and configuration register." + MODULE -- this module + MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } + + GROUP ciscoEntityExtConfigRegGroup + DESCRIPTION + "The ciscoEntityExtConfigRegGroup is an optional group + containing objects providing information about + configuration register." + + GROUP ceExtSysBootImageListGroup + DESCRIPTION + "This group is an optional group containing an object + which provides information about the system boot images." + ::= { ciscoEntityExtMIBCompliances 1 } + +ciscoEntityExtMIBComplianceRev1 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "Compliance for SNMP Entities which support modules + with CPU, NVRAM and configuration register." + MODULE -- this module + MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } + + GROUP ciscoEntityExtConfigRegGroup + DESCRIPTION + "The ciscoEntityExtConfigRegGroup is an optional group + containing objects providing information about + configuration register." + + GROUP ceExtSysBootImageListGroup + DESCRIPTION + "This group is an optional group containing an object + which provides information about the system boot images." + + GROUP ciscoEntityExtLEDGroup + DESCRIPTION + "This group is an optional group containing an object + which provides LED information." + + GROUP ceExtSysBootImageListGroupRev1 + DESCRIPTION + "This group is an optional group containing an object + which provides information about the system boot images." + ::= { ciscoEntityExtMIBCompliances 2 } + +ciscoEntityExtMIBComplianceRev2 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "Compliance for SNMP Entities which support modules + with CPU, NVRAM and configuration register." + MODULE -- this module + MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } + + GROUP ciscoEntityExtConfigRegGroup + DESCRIPTION + "The ciscoEntityExtConfigRegGroup is an optional group + containing objects providing information about + configuration register." + + GROUP ceExtSysBootImageListGroup + DESCRIPTION + "This group is an optional group containing an object + which provides information about the system boot images." + + GROUP ciscoEntityExtLEDGroup + DESCRIPTION + "This group is an optional group containing an object + which provides LED information." + + GROUP ceExtSysBootImageListGroupRev1 + DESCRIPTION + "This group is an optional group containing an object + which provides information about the system boot images." + + GROUP ciscoExtEntityPhysicalGroup + DESCRIPTION + "This group is an optional group containing an object + which provides additional information about the + physical entity." + ::= { ciscoEntityExtMIBCompliances 3 } + +ciscoEntityExtMIBComplianceRev3 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "Compliance for SNMP Entities which support modules + with CPU, NVRAM and configuration register." + MODULE -- this module + MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } + + GROUP ciscoEntityExtConfigRegGroup + DESCRIPTION + "The ciscoEntityExtConfigRegGroup is an optional group + containing objects providing information about + configuration register." + + GROUP ceExtSysBootImageListGroup + DESCRIPTION + "This group is an optional group containing an object + which provides information about the system boot images." + + GROUP ciscoEntityExtLEDGroup + DESCRIPTION + "This group is an optional group containing an object + which provides LED information." + + GROUP ceExtSysBootImageListGroupRev1 + DESCRIPTION + "This group is an optional group containing an object + which provides information about the system boot images." + + GROUP ciscoExtEntityPhysicalGroup + DESCRIPTION + "This group is an optional group containing an object + which provides additional information about the + physical entity." + + GROUP ceExtPhyProcessorOverflowGroup + DESCRIPTION + "This group is an optional group for the physical entities which + support 32-bit operating system." + + GROUP ceExtPhyProcessorHCGroup + DESCRIPTION + "This group is an optional group for the physical entities which + support 32-bit operating system." + ::= { ciscoEntityExtMIBCompliances 4 } + +ciscoEntityExtMIBComplianceRev4 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "Compliance for SNMP Entities which support modules + with CPU, NVRAM and configuration register." + MODULE -- this module + MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } + + GROUP ciscoEntityExtConfigRegGroup + DESCRIPTION + "The ciscoEntityExtConfigRegGroup is an + optional group containing objects providing + information about configuration register." + + GROUP ceExtSysBootImageListGroup + DESCRIPTION + "This group is an optional group containing an object which + provides information about the system boot images." + + GROUP ciscoEntityExtLEDGroup + DESCRIPTION + "This group is an optional group containing an object which + provides LED information." + + GROUP ceExtSysBootImageListGroupRev1 + DESCRIPTION + "This group is an optional group containing an object which + provides information about the system boot images." + + GROUP ciscoExtEntityPhysicalGroup + DESCRIPTION + "This group is an optional group containing an object which + provides additional information about the physical entity." + + GROUP ceExtPhyProcessorOverflowGroup + DESCRIPTION + "This group is an optional group for the physical entities which + support 32-bit operating system." + + GROUP ceExtPhyProcessorHCGroup + DESCRIPTION + "This group is an optional group for the physical entities which + support 32-bit operating system." + + GROUP ceExtEntDoorNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support entity door + open/close notifications." + + GROUP ceExtEntDoorNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which support entity door + open/close notifications." + + OBJECT ceExtConfigRegNext + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT ceExtSysBootImageList + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT ceExtKickstartImageList + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT ceEntPhysicalSecondSerialNum + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT ceExtEntDoorNotifEnable + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + ::= { ciscoEntityExtMIBCompliances 5 } + +ciscoEntityExtMIBComplianceRev5 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "Compliance for SNMP Entities which support modules + with CPU, NVRAM and configuration register." + MODULE -- this module + MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } + + GROUP ciscoEntityExtConfigRegGroup + DESCRIPTION + "The ciscoEntityExtConfigRegGroup is an + optional group containing objects providing + information about configuration register." + + GROUP ceExtSysBootImageListGroup + DESCRIPTION + "This group is an optional group containing an object which + provides information about the system boot images." + + GROUP ciscoEntityExtLEDGroup + DESCRIPTION + "This group is an optional group containing an object which + provides LED information." + + GROUP ceExtSysBootImageListGroupRev1 + DESCRIPTION + "This group is an optional group containing an object which + provides information about the system boot images." + + GROUP ciscoExtEntityPhysicalGroup + DESCRIPTION + "This group is an optional group containing an object which + provides additional information about the physical entity." + + GROUP ceExtPhyProcessorOverflowGroup + DESCRIPTION + "This group is an optional group for the physical entities which + support 32-bit operating system." + + GROUP ceExtPhyProcessorHCGroup + DESCRIPTION + "This group is an optional group for the physical entities which + support 32-bit operating system." + + GROUP ceExtEntDoorNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support entity door + open/close notifications." + + GROUP ceExtEntDoorNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which support entity door + open/close notifications." + + GROUP ceExtBreakOutPortNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support Breakout + port notifications." + + GROUP ceExtBreakOutPortNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which support Breakout + port notifications." + + OBJECT ceExtEntBreakOutPortNotifEnable + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + ::= { ciscoEntityExtMIBCompliances 6 } + +ciscoEntityExtMIBComplianceRev6 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Compliance for SNMP Entities which support modules + with CPU, NVRAM and configuration register." + MODULE -- this module + MANDATORY-GROUPS { ceExtPhysicalProcessorGroup } + + GROUP ciscoEntityExtConfigRegGroup + DESCRIPTION + "The ciscoEntityExtConfigRegGroup is an + optional group containing objects providing + information about configuration register." + + GROUP ceExtSysBootImageListGroup + DESCRIPTION + "This group is an optional group containing an object which + provides information about the system boot images." + + GROUP ciscoEntityExtLEDGroup + DESCRIPTION + "This group is an optional group containing an object which + provides LED information." + + GROUP ceExtSysBootImageListGroupRev1 + DESCRIPTION + "This group is an optional group containing an object which + provides information about the system boot images." + + GROUP ciscoExtEntityPhysicalGroup + DESCRIPTION + "This group is an optional group containing an object which + provides additional information about the physical entity." + + GROUP ceExtPhyProcessorOverflowGroup + DESCRIPTION + "This group is an optional group for the physical entities which + support 32-bit operating system." + + GROUP ceExtPhyProcessorHCGroup + DESCRIPTION + "This group is an optional group for the physical entities which + support 32-bit operating system." + + GROUP ceExtEntDoorNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support entity door + open/close notifications." + + GROUP ceExtEntDoorNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which support entity door + open/close notifications." + + GROUP ceExtBreakOutPortNotifGroup + DESCRIPTION + "This group is mandatory for platforms which support Breakout + port notifications." + + GROUP ceExtBreakOutPortNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which support Breakout + port notifications." + + GROUP ceExtUSBModemGroup + DESCRIPTION + "This group is mandatory for platforms which support + USB Modem management." + + GROUP ceExtUsbModemNotificationsGroup + DESCRIPTION + "This group is mandatory for platforms which support + USB Modem management." + + GROUP ceExtUsbModemNotifControlGroup + DESCRIPTION + "This group is mandatory for platforms which support + USB Modem management." + + OBJECT ceExtEntBreakOutPortNotifEnable + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT ceExtEntUsbModemNotifEnable + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + ::= { ciscoEntityExtMIBCompliances 7 } + +-- units of conformance + +ceExtPhysicalProcessorGroup OBJECT-GROUP + OBJECTS { + ceExtProcessorRam, + ceExtNVRAMSize, + ceExtNVRAMUsed + } + STATUS current + DESCRIPTION + "The collection of objects which give information about + the Processor RAM and NVRAM." + ::= { ciscoEntityExtMIBGroups 1 } + +ciscoEntityExtConfigRegGroup OBJECT-GROUP + OBJECTS { + ceExtConfigRegister, + ceExtConfigRegNext + } + STATUS current + DESCRIPTION + "The collection of objects which give information about + configuration register. + + Implementation of this group is optional." + ::= { ciscoEntityExtMIBGroups 2 } + +ceExtSysBootImageListGroup OBJECT-GROUP + OBJECTS { ceExtSysBootImageList } + STATUS current + DESCRIPTION + "A group containing an object providing information + about the system boot images. + + Implementation of this group is optional." + ::= { ciscoEntityExtMIBGroups 3 } + +ciscoEntityExtLEDGroup OBJECT-GROUP + OBJECTS { ceExtEntityLEDColor } + STATUS current + DESCRIPTION + "A collection of objects for giving led information." + ::= { ciscoEntityExtMIBGroups 4 } + +ceExtSysBootImageListGroupRev1 OBJECT-GROUP + OBJECTS { ceExtKickstartImageList } + STATUS current + DESCRIPTION + "A group containing an object providing information + about the system boot images. + + Implementation of this group is optional." + ::= { ciscoEntityExtMIBGroups 5 } + +ciscoExtEntityPhysicalGroup OBJECT-GROUP + OBJECTS { ceEntPhysicalSecondSerialNum } + STATUS current + DESCRIPTION + "The collection of objects for providing additional + information about the physical entity. + + Implementation of this group is optional." + ::= { ciscoEntityExtMIBGroups 6 } + +ceExtPhyProcessorOverflowGroup OBJECT-GROUP + OBJECTS { ceExtProcessorRamOverflow } + STATUS current + DESCRIPTION + "The collection of Overflow (upper 32-bit) objects which + provides information about physical processor, when the entity + runs on 64-bit Operating System (OS). This group is optional for + the entities which run on 32-bit OS." + ::= { ciscoEntityExtMIBGroups 7 } + +ceExtPhyProcessorHCGroup OBJECT-GROUP + OBJECTS { ceExtHCProcessorRam } + STATUS current + DESCRIPTION + "The collection of High Capacity (HC) objects which provides + information about physical processor, when the entity runs on + 64-bit Operating System (OS). This group is optional for the + entities which run on 32-bit OS." + ::= { ciscoEntityExtMIBGroups 8 } + +ceExtEntDoorNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { + ceExtEntDoorCloseNotif, + ceExtEntDoorOpenNotif + } + STATUS current + DESCRIPTION + "A collection of objects providing the notification + information for door entitites." + ::= { ciscoEntityExtMIBGroups 9 } + +ceExtEntDoorNotifControlGroup OBJECT-GROUP + OBJECTS { ceExtEntDoorNotifEnable } + STATUS current + DESCRIPTION + "A collection of objects providing control for entity door + notifications." + ::= { ciscoEntityExtMIBGroups 10 } + +ceExtBreakOutPortNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { + ceExtBreakOutPortInserted, + ceExtBreakOutPortRemoved + } + STATUS current + DESCRIPTION + "A collection of objects providing the notification + information for supporting Breakout port feature." + ::= { ciscoEntityExtMIBGroups 11 } + +ceExtBreakOutPortNotifControlGroup OBJECT-GROUP + OBJECTS { ceExtEntBreakOutPortNotifEnable } + STATUS current + DESCRIPTION + "A collection of objects providing control for Breakout + Port notifications." + ::= { ciscoEntityExtMIBGroups 12 } + +ceExtUSBModemGroup OBJECT-GROUP + OBJECTS { + ceExtUSBModemIMEI, + ceExtUSBModemIMSI, + ceExtUSBModemServiceProvider, + ceExtUSBModemSignalStrength + } + STATUS current + DESCRIPTION + "A collection of objects for giving USB MODEM + config information." + ::= { ciscoEntityExtMIBGroups 13 } + +ceExtUsbModemNotificationsGroup NOTIFICATION-GROUP + NOTIFICATIONS { + ceExtUSBModemPlugInNotif, + ceExtUSBModemPlugOutNotif + } + STATUS current + DESCRIPTION + "A collection of notifications for USB MODEM removal and + insertion." + ::= { ciscoEntityExtMIBGroups 14 } + +ceExtUsbModemNotifControlGroup OBJECT-GROUP + OBJECTS { ceExtEntUsbModemNotifEnable } + STATUS current + DESCRIPTION + "A collection of objects providing control for USB + MODEM notifications." + ::= { ciscoEntityExtMIBGroups 15 } + +ceExtNVRAMOverflowGroup OBJECT-GROUP + OBJECTS { + ceExtNVRAMSizeOverflow, + ceExtNVRAMUsedOverflow + } + STATUS current + DESCRIPTION + "The collection of objects providing Overflow (upper 32-bit) objects + for processor NVRAM information." + ::= { ciscoEntityExtMIBGroups 16 } + +ceExtHCNVRAMGroup OBJECT-GROUP + OBJECTS { + ceExtHCNVRAMSize, + ceExtHCNVRAMUsed + } + STATUS current + DESCRIPTION + "The collection of objects providing High Capacity (HC) objects + for processor NVRAM information." + ::= { ciscoEntityExtMIBGroups 17 } + +END |