diff options
Diffstat (limited to 'MIBS/cisco/CISCO-LWAPP-WLAN-MIB')
| -rw-r--r-- | MIBS/cisco/CISCO-LWAPP-WLAN-MIB | 5278 |
1 files changed, 5278 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-LWAPP-WLAN-MIB b/MIBS/cisco/CISCO-LWAPP-WLAN-MIB new file mode 100644 index 0000000..8dda30f --- /dev/null +++ b/MIBS/cisco/CISCO-LWAPP-WLAN-MIB @@ -0,0 +1,5278 @@ +-- ******************************************************************* +-- CISCO-LWAPP-WLAN-MIB.my +-- This MIB helps to manage the WLANs on the controller +-- January 2006, Devesh Pujari, Prasanna Viswakumar +-- +-- Copyright (c) 2006-2007, 2009-2010, 2016-2018 by Cisco Systems Inc. +-- All rights reserved. +-- ******************************************************************* + +CISCO-LWAPP-WLAN-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + Unsigned32, + Gauge32, + TimeTicks, + Integer32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP + FROM SNMPv2-CONF + TimeStamp, + TruthValue, + RowStatus, + StorageType, + DisplayString, + MacAddress + FROM SNMPv2-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + InetAddressType, + InetAddress + FROM INET-ADDRESS-MIB + CiscoURLStringOrEmpty + FROM CISCO-TC + ciscoMgmt + FROM CISCO-SMI; + + +ciscoLwappWlanMIB MODULE-IDENTITY + LAST-UPDATED "201807050000Z" + ORGANIZATION "Cisco Systems Inc." + CONTACT-INFO + "Cisco Systems, + Customer Service + Postal: 170 West Tasman Drive + San Jose, CA 95134 + USA + Tel: +1 800 553-NETS + + Email: cs-wnbu-snmp@cisco.com" + DESCRIPTION + "This MIB is intended to be implemented on all those + devices operating as Central Controllers (CC) that + terminate the Light Weight Access Point Protocol + tunnel from Cisco Light-weight LWAPP Access Points. + + This MIB helps to manage the WLANs on the controller. + + The relationship between CC and the LWAPP APs + can be depicted as follows: + + +......+ +......+ +......+ +......+ + + + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + + + +......+ +......+ +......+ +......+ + .. . . . + .. . . . + . . . . . + . . . . . + . . . . . + . . . . . + +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ + . . . . + . . . . . + . . . . . + . . . . . + . . . . . + +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ + + The LWAPP tunnel exists between the controller and + the APs. The MNs communicate with the APs through + the protocol defined by the 802.11 standard. + + LWAPP APs, upon bootup, discover and join one of the + controllers and the controller pushes the configuration, + that includes the WLAN parameters, to the LWAPP APs. + The APs then encapsulate all the 802.11 frames from + wireless clients inside LWAPP frames and forward + the LWAPP frames to the controller. + + GLOSSARY + + Access Point ( AP ) + + An entity that contains an 802.11 medium access + control ( MAC ) and physical layer ( PHY ) interface + and provides access to the distribution services via + the wireless medium for associated clients. + + LWAPP APs encapsulate all the 802.11 frames in + LWAPP frames and sends it to the controller to which + it is logically connected to. + + Central Controller ( CC ) + + The central entity that terminates the LWAPP protocol + tunnel from the LWAPP APs. Throughout this MIB, + this entity also referred to as 'controller'. + + Light Weight Access Point Protocol ( LWAPP ) + + This is a generic protocol that defines the + communication between the Access Points and the + controllers. + + Mobile Node ( MN ) + + A roaming 802.11 wireless device in a wireless + network associated with an access point. + + Access Control List ( ACL ) + + A list of rules used to restrict the traffic reaching + an interface or the CPU or WLAN. Each ACL is an ordered + set of rules and actions. If a rule matches then the + action for that rule is applied to the packet. + + 802.1x + + The IEEE ratified standard for enforcing port based + access control. This was originally intended for + use on wired LANs and later extended for use in + 802.11 WLAN environments. This defines an + architecture with three main parts - a supplicant + (Ex. an 802.11 wireless client), an authenticator + (the AP) and an authentication server(a Radius + server). The authenticator passes messages back + and forth between the supplicant and the + authentication server to enable the supplicant + get authenticated to the network. + + Temporal Key Integrity Protocol ( TKIP ) + + A security protocol defined to enhance the limitations + of WEP. Message Integrity Check and per-packet keying + on all WEP-encrypted frames are two significant + enhancements provided by TKIP to WEP. + + Cisco Key Integrity Protocol ( CKIP ) + + A proprietary implementation similar to TKIP. CKIP + implements key permutation for protecting the CKIP + key against attacks. Other features of CKIP include + expansion of encryption key to 16 bytes of length for + key protection and MIC to ensure data integrity. + + Wired Equivalent Privacy ( WEP ) + + A security method defined by 802.11. WEP uses a + symmetric key stream cipher called RC4 to encrypt the + data packets. + + Wi-Fi Protected Access ( WPA ) + + Wi-Fi Protected Access (WPA and WPA2) are security + systems created in response to several serious + weaknesses found in Wired Equivalent Privacy (WEP). + WPA implements the majority of the IEEE 802.11i + standard, and was intended as an intermediate + measure to take the place of WEP while 802.11i was + prepared. WPA is designed to work with all wireless + network interface cards, but not necessarily with + first generation wireless access points. + + WLAN Layer 2 Security + + WLAN layer 2 (MAC) security defines the encryption and + authentication approaches such as 802.1x, WPA, + WPA2, CKIP and WEP. + + Delivery Traffic Indication Map ( DTIM ) + + DTIM is measured in beacon intervals and is the time + period during which multicast/broadcast packets are + sent to clients. This helps client to go in Power Saving + mode and helps to save battery power. + + Network Admission Control (NAC) + + Cisco NAC uses the network infrastructure to enforce security + policy compliance on all devices that seek to access network + computing resources. With the Cisco NAC appliance, network + administrators can authenticate, authorize, evaluate, and + remediate wired, wireless, and remote users and their machines + prior to network access. The Cisco NAC appliance identifies + whether networked devices such as laptops, IP phones, or game + consoles are compliant with network security policies, and + repairs any vulnerabilities before it permits access to the + network. + + Out of Band (OOB) + + Out-of-band deployments require user traffic to traverse through + the NAC appliance only within authentication, posture + assessment, and remediation. When a user is authenticated and + passes all policy checks, the traffic is switched normally + through the network and bypasses the NAC server. + + Band Select + + The 2.4 GHz band is congested and clients have to contend with + numerous performance challenges. These consist of interference + from Bluetooth, microwave ovens, cordless phones, etc.; + protection mechanisms from 802.11b legacy clients; and + co-channel interference from other access points due to + 802.11bg?s limit of three non-overlapping channels. Allowing + client Wi-Fi radios capable of dual band (2.4 and 5 GHz) + operation move to the less congested 5 GHz radios would improve + the overall performance of the network. + The Band Select algorithm is based on probe response suppression + on clients 2.4G radio. The feature is OFF by default and has to + be manually switched ON globally for a WLC. It can be optionally + over-ridden per-SSID to disallow it. + + Network Access Identifier ( NAI ) + + In order to provide roaming services, it is necessary + to have a standardized method for identifying users. + NAI is actually the user identity submitted by the client + during network authentication. + + KTS (Key Telephone System) + + Key Telephone System is an alternative to a + private branch exchange (PBX)phone system. + A KTS is equipped with several buttons that allow + a caller to directly select outgoing lines or + incoming calls, and use intercom and + conference facilities. + + HALO (Hyperlocation) + + Hyperlocation is a technique of calculating location using + Angle of Arrival(AoA) tracks 802.11 OFDM clients + (meaning 802.11a/g/n/ac clients) that are associated(connected) + on the network and is able to do so with much higher accuracy + than conventional Real Time Location Systems(RTLS) that rely + on only RSSI (RF Signal Strength). + + PakRSSI (Packet Received Signal Strength Indicator) + + PakRSSI is a measurement of the power present in a received radio signal. + + POE (Power Over Ethernet) + + Power over Ethernet or PoE describes any of several standardized + or ad-hoc systems which pass electrical power along with data on + Ethernet cabling. This allows a single cable to provide both data + connection and electrical power to devices such as wireless + access points or IP cameras. + REFERENCE + + [1] Wireless LAN Medium Access Control ( MAC ) and + Physical Layer ( PHY ) Specifications. + + [2] Draft-obara-capwap-lwapp-00.txt, IETF Light + Weight Access Point Protocol + + [3] IEEE 802.11 - The original 1 Mbit/s and 2 Mbit/s, + 2.4 GHz RF and IR standard." + REVISION "201807050000Z" + DESCRIPTION + "Added new table + -cLPolicyWlanSchedulingTable. + Added allowPvtGrp(4) in the object cLWlanP2PBlocking. + Added following objects in cLAPGroupConfigTable + -cLApGroupGlobalWebAuthConfig + -cLApGroupExternalWebAuthUrl." + REVISION "201803070000Z" + DESCRIPTION + "Added the following objects to the table cLWlanConfigQosTable + -cLWlanWlanDSAverageDataRate + -cLWlanWlanUSAverageDataRate + -cLWlanWlanDSBurstDataRate + -cLWlanWlanUSBurstDataRate + -cLWlanWlanDSAvgRealTimeDataRate + -cLWlanWlanUSAvgRealTimeDataRate + -cLWlanWlanDSBurstRealTimeDataRate + -cLWlanWlanUSBurstRealTimeDataRate" + REVISION "201707220000Z" + DESCRIPTION + "Removed the changes done on revision + 201612080000Z" + REVISION "201612080000Z" + DESCRIPTION + "Added the following objects + -cLWlanSelfAnchorEnabled + -cLWlan11acMuMimoEnabled + -cLWlanFlexibleNetflowEntry + -cLWlanFlexibleNetflowPolicyTypeIndex + -cLWlanFlexibleNetflowMonitorName + -cLWlanFlexibleNetflowRowStatus + + Added new table + -cLWlanFlexibleNetflowTable + + Added new compliance objects + -ciscoLwappWlanMIBComplianceRev9 + + Added new compliance object groups + -ciscoLwappWlanQosConfigGroup + -ciscoLwappWlanConfigGroupSup4 + -ciscoLwappWlan11uConfigGroupsup2 + -ciscoLwappAPGroupsVlanConfigGroupSup1 + -cLAPGroupsVenueConfigGroup + -cLAPGroupsMultipleVenueGroup + -ciscoLwappWlanConfigClientGroupSup2 + -ciscoLwappWlanConfigFlexibleNetflowGroup + -ciscoLwappWlanConfigGroupSup5 + -ciscoLwappAPGroupsVlanConfigGroupSup2 + -ciscoLwappWlanConfigGroupSup6 + -ciscoLwappWlanConfigGroupSup7 + -ciscoLwappWlanConfigGroupSup8 + -ciscoLwappWlan11vConfigGroup" + REVISION "201612080000Z" + DESCRIPTION + "Added the following objects + - cLWlan11vBssTransEnable + - cLWlan11vDisassocImmiEnable + - cLWlan11vDisassocTimer + - cLWlan11vOpRoamDisassocTimer + Added new group + - ciscoLwappWlan11vConfigGroup + Added new compliance + ciscoLwappWlanMIBComplianceRev9 which + deprecates ciscoLwappWlanMIBComplianceRev8." + REVISION "201604070000Z" + DESCRIPTION + "Added new tables ciscoLwappAPGroupsHyperlocationConfig to + support Hyperlocation feature and ciscoLwappAPGroupsPortConfig + to support AP Group LAN port configurations. + Added new groups ciscoLwappWlanConfigGroupSup8, + ciscoLwappWlanConfigGroupSup9. Added new compliance + ciscoLwappWlanMIBComplianceRev8 which + deprecates ciscoLwappWlanMIBComplianceRev7." + REVISION "201504230000Z" + DESCRIPTION + "Added Default value to the cLWlanMulticastInterface object." + REVISION "201504170000Z" + DESCRIPTION + "Added cLWlan11acMuMimoEnabled object to cLWlanConfigEntry. + ciscoLwappWlanMIBComplianceRev6 is superceded by + ciscoLwappWlanMIBComplianceRev7 + Added new group ciscoLwappWlanConfigGroupSup6." + REVISION "201411050000Z" + DESCRIPTION + "Added the cLWlanSelfAnchorEnabled to support + the mobility self anchor. + cLAPGroupsVlanMappingInterfaceName is superceded by + cLAPGroupsVlanMappingInterfaceNameRev1. + ciscoLwappAPGroupsVlanConfigGroup is superceded by + ciscoLwappAPGroupsVlanConfigGroupSup2. + ciscoLwappWlanMIBComplianceRev5 is superceded by + ciscoLwappWlanMIBComplianceRev6 + Added cLWlanUniversalAdmin object to cLWlanConfigEntry. + Added new group ciscoLwappWlanConfigGroupSup5." + REVISION "201303300000Z" + DESCRIPTION + "Added cLWlanFlexibleNetflowTable to support AVC feature. + Added new object group + CiscoLwappWlanConfigFlexibleNetflowGroup. + Added new compliance ciscoLwappWlanMIBComplianceRev5 which + deprecates ciscoLwappWlanMIBComplianceRev4." + REVISION "201206210000Z" + DESCRIPTION + "Added the following objects + WLAN QoS Config table, + AP group Venue Table, + ciscoLwappWlanQosConfigGroup + ciscoLwappWlanConfigGroupSup4 + ciscoLwappWlan11uConfigGroupsup2 + ciscoLwappWlanHotSpot2ConfigGroupSup1 + ciscoLwappAPGroupsVlanConfigGroupSup1 + cLAPGroupsVenueConfigGroup + cLAPGroupsMultipleVenueGroup + ciscoLwappWlanConfigClientGroupSup2 + WLAN IOS objects. + - + Added the following objects to cLWlan11uTable. + cLWlan11uHessid, + cLWlan11uNetworkAuthType, + cLWlan11uOui, + cLWlan11uOuiIsBeacon, + cWlan11uOuiRowStatus, + cLWlan11uOuiStorageType, + cLWlan11uRealmName, + cLWlan11uRealmRowStatus, + cLWlan11uRealmEapMethod, + cLWlan11uRealmEapRowStatus, + cLWlan11uRealmEapAuthMethod, + cLWlan11uRealmEapAuthParam, + cLWlan11uRealmEapAuthRowStatus, + cLWlan11uDomainName, + cLWlan11uDomainRowStatus, + cLWlan11u3gppCountryCode, + cLWlan11u3gppNetworkCode, + cLWlan11u3gppRowStatus, + cLWlan11uIpAddressAvailIpv4, + cLWlan11uIpAddressAvailIpv6 + - + Added the following OBJECT-GROUPs: + ciscoLwappWlan11uConfigGroupsup1 + ciscoLwappWlanServiceAdvertisementConfigGroup, + ciscoLwappWlanHotSpot2ConfigGroup + - + Added new compliance ciscoLwappWlanMIBComplianceRev4 which + deprecates ciscoLwappWlanMIBComplianceRev3." + REVISION "201103100000Z" + DESCRIPTION + "Added the following objects to cLWlanConfigTable. + cLWlanReAnchorRoamedVoiceClientsEnable, + cLWlanMulticastInterfaceEnable, + cLWlanMulticastInterface, + cLWlanMulticastDirectEnable, + cLWlanNACPostureSupport, + cLWlanMaxClientsAccepted, + cLWlanScanDeferPriority, + cLWlanScanDeferTime, + cLWlanLanSubType, + cLWlanWebAuthOnMacFilterFailureEnabled, + cLWlanStaticIpTunnelingEnabled. + - + Added new group ciscoLwappWlanConfigGroupSup3. + - + Added new compliance ciscoLwappWlanMIBComplianceRev3 which + deprecates ciscoLwappWlanMIBComplianceRev2." + REVISION "201003030000Z" + DESCRIPTION + "Added the following OBJECT-GROUPs: + ciscoLwappWlan11uConfigGroup + ciscoLwappAPGroupsVlanConfigGroup + ciscoLwappWlanConfigGroupSup2 + ciscoLwappWlanConfigClientGroupSup1" + REVISION "200704020000Z" + DESCRIPTION + "Added following object in cLWlanConfigClientTable + cLWlanP2PBlocking" + REVISION "200702030000Z" + DESCRIPTION + "Added following objects in cLWlanConfigTable: + cLWlanProfileName + cLWlanSsid + cLWlanDiagChan + cLWlanStorageType + Added following table: + cLWlanConfigClientTable + Added the following OBJECT-GROUPs: + ciscoLwappWlanConfigGroupSup1 + ciscoLwappWlanConfigClientGroup + Added ciscoLwappWlanMIBComplianceRev1 MODULE-COMPLIANCE." + REVISION "200603210000Z" + DESCRIPTION + "Initial version of this MIB module." + ::= { ciscoMgmt 512 } + + +ciscoLwappWlanMIBNotifs OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIB 0 } + +ciscoLwappWlanMIBObjects OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIB 1 } + +ciscoLwappWlanMIBConform OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIB 2 } + +ciscoLwappWlanConfig OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 1 } + +ciscoLwappAPGroupsVlanConfig OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 2 } + +ciscoLwappWlan11uConfig OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 3 } + +ciscoLwappWlanServiceAdvertisementConfig OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 4 } + +ciscoLwappWlanHotSpot2Config OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 5 } + +ciscoLwappAPGroupNasIdConfig OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 6 } + +ciscoLwappPolicyConfig OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 7 } + +ciscoLwappAPGroupsHyperlocationConfig OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 8 } + +ciscoLwappAPGroupsPortConfig OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBObjects 9 } + +-- ******************************************************************** +-- WLAN configuration +-- ******************************************************************** + +cLWlanConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the WLAN configuration sent by + the controller to the LWAPP APs for their operation. + + LWAPP APs exchange configuration messages with the + controller and get the required configuration for + their 802.11 related operations. As part of these + messages, the WLAN configuration is pushed by the + controller to the LWAPP APs. + + This table doesn't have any dependencies on other + existing tables. By defining cLWlanIndex, the + unique identifier for a WLAN, this table provides + a common index structure for use in several other + new tables that populate information on security + related attributes like authentication, encryption, + 802.11 parameters, Quality-of-Service attributes + etc., that would relate to a particular WLAN. + + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLWlanRowStatus object." + ::= { ciscoLwappWlanConfig 1 } + +cLWlanConfigEntry OBJECT-TYPE + SYNTAX CLWlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the WLAN + configuration sent by the controller to LWAPP APs + for use during their operations. entries can be + added/deleted by explicit management actions by + NMS or by user console" + INDEX { cLWlanIndex } + ::= { cLWlanConfigTable 1 } + +CLWlanConfigEntry ::= SEQUENCE { + cLWlanIndex Unsigned32, + cLWlanRowStatus RowStatus, + cLWlanProfileName SnmpAdminString, + cLWlanSsid OCTET STRING, + cLWlanDiagChan TruthValue, + cLWlanStorageType StorageType, + cLWlanIsWired TruthValue, + cLWlanIngressInterface OCTET STRING, + cLWlanNACSupport TruthValue, + cLWlanWepKeyChange TimeStamp, + cLWlanChdEnable TruthValue, + cLWlan802dot11anDTIM Unsigned32, + cLWlan802dot11bgnDTIM Unsigned32, + cLWlanLoadBalancingEnable TruthValue, + cLWlanBandSelectEnable TruthValue, + cLWlanPassiveClientEnable TruthValue, + cLWlanReAnchorRoamedVoiceClientsEnable TruthValue, + cLWlanMulticastInterfaceEnable TruthValue, + cLWlanMulticastInterface SnmpAdminString, + cLWlanMulticastDirectEnable TruthValue, + cLWlanNACPostureSupport TruthValue, + cLWlanMaxClientsAccepted Unsigned32, + cLWlanScanDeferPriority BITS, + cLWlanScanDeferTime Unsigned32, + cLWlanLanSubType INTEGER, + cLWlanWebAuthOnMacFilterFailureEnabled TruthValue, + cLWlanStaticIpTunnelingEnabled TruthValue, + cLWlanKtsCacSupportEnabled TruthValue, + cLWlanWifiDirectPolicyStatus INTEGER, + cLWlanWebAuthIPv6AclName SnmpAdminString, + cLWlanHotSpot2Enabled TruthValue, + cLWlanMaxClientsAllowedPerRadio Unsigned32, + cLWlanDhcpDeviceProfiling TruthValue, + cLWlanMacAuthOverDot1xEnabled TruthValue, + cLWlanUserTimeout Unsigned32, + cLWlanUserIdleThreshold Unsigned32, + cLWlanHttpDeviceProfiling TruthValue, + cLWlanHotSpotClearConfig INTEGER, + cLWlanRadiusAuthFourthServer DisplayString, + cLWlanRadiusAuthFifthServer DisplayString, + cLWlanRadiusAuthSixthServer DisplayString, + cLWlanRadiusAcctFourthServer DisplayString, + cLWlanRadiusAcctFifthServer DisplayString, + cLWlanRadiusAcctSixthServer DisplayString, + cLWlanSelfAnchorEnabled TruthValue, + cLWlanUniversalAdmin TruthValue, + cLWlan11acMuMimoEnabled TruthValue, + cLWlan11vDisassocImmiEnable TruthValue, + cLWlan11vDisassocTimer Unsigned32, + cLWlan11vOpRoamDisassocTimer Unsigned32, + cLWlan11vBssTransEnable TruthValue +} + +cLWlanIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..517) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of + a WLAN on the controller. The value 513-517 indicates + wired clients." + ::= { cLWlanConfigEntry 1 } + +cLWlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the status column for this row and used + to create, modify and delete specific instances of rows + in this table. + This table supports modification of writable objects when the + RowStatus is 'active'. + The following objects are mandatory for successful + creation of an entry: + cLWlanProfileName + cLWlanSsid." + ::= { cLWlanConfigEntry 2 } + +cLWlanProfileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..64)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the profile name assigned + to this WLAN. The name assigned to a WLAN has to be + unique across all the WLANs on the controller. + An administrator can assign a meaningful + name that could later be used to refer a particular + WLAN on the controller. This object cannot be + modified when cLWlanRowStatus is 'active'." + ::= { cLWlanConfigEntry 3 } + +cLWlanSsid OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the SSID assigned to + this WLAN. The access points will broadcast this SSID + on this WLAN. Different WLAN could use the same SSID as + long as the layer 2 security is different. This object + cannot be modified when cLWlanRowStatus is 'active'." + ::= { cLWlanConfigEntry 4 } + +cLWlanDiagChan OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure this WLAN as a diagnostic + WLAN. A value of 'true' indicates that the WLAN can be used for + diagnostic purposes. A value of 'false' indicates that the WLAN + can not be used for diagnostic purposes." + DEFVAL { false } + ::= { cLWlanConfigEntry 5 } + +cLWlanStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represnts the storage type for this + conceptual row." + DEFVAL { nonVolatile } + ::= { cLWlanConfigEntry 6 } + +cLWlanIsWired OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure this WLAN as a + wired or wireless WLAN. A value of 'true' indicates + that this is a wired WLAN. A value of 'false' + indicates that this is a wireless WLAN." + ::= { cLWlanConfigEntry 7 } + +cLWlanIngressInterface OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the ingress interface attached to the + wireless lan." + ::= { cLWlanConfigEntry 8 } + +cLWlanNACSupport OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure the NAC- Out Of + Band(OOB) support for the WLAN. + A value of 'true' indicates that + the WLAN supports the NAC- Out Of Band(OOB) feature. + A value of 'false' indicates that + the WLAN does not support the NAC- Out Of Band(OOB) + feature." + DEFVAL { false } + ::= { cLWlanConfigEntry 9 } + +cLWlanWepKeyChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the time when the + static WEP key was changed by the user." + ::= { cLWlanConfigEntry 10 } + +cLWlanChdEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates whether Coverage Hole Detection + (CHD) is enabled on the controller. A value of 'true' + indicates CHD is on and a value of 'false' indicates + CHD is turned off for this WLAN." + DEFVAL { true } + ::= { cLWlanConfigEntry 11 } + +cLWlan802dot11anDTIM OBJECT-TYPE + SYNTAX Unsigned32 (1..255) + UNITS "Beacon Intervals" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents DTIM configuration per WLAN for each + 802.11 network. + The DTIM value is measured in Beacon Intervals." + DEFVAL { 1 } + ::= { cLWlanConfigEntry 12 } + +cLWlan802dot11bgnDTIM OBJECT-TYPE + SYNTAX Unsigned32 (1..255) + UNITS "Beacon Intervals" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents DTIM configuration per WLAN for each + 802.11 network. + The DTIM value is measured in Beacon Intervals." + DEFVAL { 1 } + ::= { cLWlanConfigEntry 13 } + +cLWlanLoadBalancingEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates whether Load Balancing is + enabled on the controller for this WLAN . A value of 'true' + indicates Load Balance is on and a value of 'false' indicates + Load Balance is turned off for this WLAN." + DEFVAL { true } + ::= { cLWlanConfigEntry 14 } + +cLWlanBandSelectEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates whether Band Select is enabled + on the controller for this WLAN. A value of 'true' + indicates Band Select is on and a value of 'false' indicates + Band Select is turned off for this WLAN." + DEFVAL { true } + ::= { cLWlanConfigEntry 15 } + +cLWlanPassiveClientEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies whether passive client is enabled + on the controller for this WLAN. A value of 'true' + indicates passive client is on and a value of 'false' indicates + passive client is turned off for this WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 16 } + +cLWlanReAnchorRoamedVoiceClientsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies whether the Roamed Voice Client + Re-Anchoring feature is enabled on the controller for this + WLAN. + A value of 'true' indicates the roamed voice clients will get + re-anchored. + A value of 'false' indicates the roamed voice clients + re-anchoring is turned off for this WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 17 } + +cLWlanMulticastInterfaceEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies whether multicast interface + is enabled on the controller. A value of 'true' + indicates that multicast interface feature is enabled + and the interface represented by 'cLWlanMulticastInterface' + would be used for the multicast traffic on this WLAN. + A value of 'false' indicates that multicast interface + feature is turned off for this WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 18 } + +cLWlanMulticastInterface OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the interface, which would be used + for the multicast traffic for all the clients that are + associated to this WLAN." + DEFVAL { "default" } + ::= { cLWlanConfigEntry 19 } + +cLWlanMulticastDirectEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies whether multicast direct is enabled + on the controller for this WLAN. + A value of 'true' indicates multicast direct is ON. + A value of 'false' indicates multicast direct is turned + off for this WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 20 } + +cLWlanNACPostureSupport OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure the NAC-Posture + support for the WLAN. + A value of 'true' indicates that the WLAN supports the + NAC-Posture feature. + A value of 'false' indicates that the WLAN does not support the + NAC-Posture feature." + DEFVAL { false } + ::= { cLWlanConfigEntry 21 } + +cLWlanMaxClientsAccepted OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the maximum number of client connection + allowed for this WLAN. + A value of 0 indicates that there is no limit on maximum + allowed clients for this WLAN." + DEFVAL { 0 } + ::= { cLWlanConfigEntry 22 } + +cLWlanScanDeferPriority OBJECT-TYPE + SYNTAX BITS { + bit0(0), + bit1(1), + bit2(2), + bit3(3), + bit4(4), + bit5(5), + bit6(6), + bit7(7) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the priority of packets + that defer the off-channel scan. This is used in + off-channel scanning to improve performance + for medical devices using Radio Resource Management. + Each bit represents a packet type for which off-channel + scanning needs to be deferred. + bit0 - Best effort. + bit1 - Background + bit2 - Spare + bit3 - Excellent effort + bit4 - Controlled load + bit5 - Video, less than 100-ms latency and jitter + bit6 - Voice, less than 10-ms latency and jitter + bit7 - Network control" + DEFVAL { { bit5 , bit6 } } + ::= { cLWlanConfigEntry 23 } + +cLWlanScanDeferTime OBJECT-TYPE + SYNTAX Unsigned32 (0..60000) + UNITS "milliseconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the minimum number of milliseconds + that must elapse without the appearance of a specified packet + before the access point radios begin an off-channel scan." + DEFVAL { 100 } + ::= { cLWlanConfigEntry 24 } + +cLWlanLanSubType OBJECT-TYPE + SYNTAX INTEGER { + wirelessLan(1), + guestLan(2), + remoteLan(3), + other(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the sub-type of the LAN created. + This has to be congruent with cLWlanIswired. + If cLWlanIswired is set to 'true', allowed values are + guestLan(2) + and remoteLan(3). + If cLWlanIswired is set to 'false', allowed value is + wirelessLan(1). + A value of other(4) will be returned if it doesnt match any + values defined here. This value is not configurable." + ::= { cLWlanConfigEntry 25 } + +cLWlanWebAuthOnMacFilterFailureEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure the Web based + authentication on Mac Filter failure support for the WLAN. + A value of 'true' enables Web authentication on MAC + filter failure for the WLAN. + A value of 'false' disables Web authentication on MAC + filter failure for the WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 26 } + +cLWlanStaticIpTunnelingEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure the Static IP Tunneling + of clients feature support for the WLAN. + A value of 'true' enables static IP Tunneling of client + for the WLAN. + A value of 'false' disables static IP Tunneling of client + for the WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 27 } + +cLWlanKtsCacSupportEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure the KTS CAC + support for the WLAN. + A value of 'true' enables the KTS based CAC support + for this wlan. + A value of 'false' disables the KTS based CAC support + for this wlan." + DEFVAL { false } + ::= { cLWlanConfigEntry 28 } + +cLWlanWifiDirectPolicyStatus OBJECT-TYPE + SYNTAX INTEGER { + disable(1), + allow(2), + notAllow(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to allow/disallow wi-fi + direct clients to/from joining the infrastructure + network. + disable(1) - WFD is completely disabled. + allow(2) - allow WFD clients + disallow(3) - controller rejects association request from WFD + clients only if it has P2P IE with concurrency enabled." + ::= { cLWlanConfigEntry 29 } + +cLWlanWebAuthIPv6AclName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the name of the Web Auth + IPv6 ACL applied to this WLAN. + If it is required to remove the ACL + name for a WLAN, it should be set to 'none'. + ACL's are applied in the following priority order - + interfaces ACLs, WLAN ACLs, client ACLs." + ::= { cLWlanConfigEntry 30 } + +cLWlanHotSpot2Enabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the hotSpot2 feature for this WLAN. + A value of 'true' enables the HotSpot2 + for this wlan. + A value of 'false' disables the HotSpot2 + for this wlan." + DEFVAL { false } + ::= { cLWlanConfigEntry 31 } + +cLWlanMaxClientsAllowedPerRadio OBJECT-TYPE + SYNTAX Unsigned32 (1..200) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the maximum allowed clients + per AP radio for a WLAN." + DEFVAL { 200 } + ::= { cLWlanConfigEntry 32 } + +cLWlanDhcpDeviceProfiling OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the status of + DHCP Device Profiling feature for this WLAN. + A value of 'true' enables DHCP Device Profiling on this wlan. + A value of 'false' disables DHCP the Device Profiling + on this wlan." + DEFVAL { false } + ::= { cLWlanConfigEntry 33 } + +cLWlanMacAuthOverDot1xEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the configuration state of + authentication failover to Dot1x for the WLAN. + A value of 'true' enables mac auth or dot1x + for the WLAN. + A value of 'false' disables mac auth or dot1x + for the WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 34 } + +cLWlanUserTimeout OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the timeout value of user for a WLAN." + DEFVAL { 300 } + ::= { cLWlanConfigEntry 35 } + +cLWlanUserIdleThreshold OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "bytes" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the user idle threshold value in bytes + for a WLAN." + DEFVAL { 0 } + ::= { cLWlanConfigEntry 36 } + +cLWlanHttpDeviceProfiling OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the status of + HTTP Device Profiling feature for this WLAN. + A value of 'true' enables HTTP Device Profiling on this wlan. + A value of 'false' disables the HTTP Device Profiling + on this wlan." + DEFVAL { false } + ::= { cLWlanConfigEntry 37 } + +cLWlanHotSpotClearConfig OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to clear all the configuration + related to HotSpot feature at WLAN level. + A value of 'enable' would clear the configuration. + When queries for the current value, always 'disable' + would be returned." + DEFVAL { disable } + ::= { cLWlanConfigEntry 38 } + +cLWlanRadiusAuthFourthServer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..21)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Fourth + Radius Authentication Server for this wlan." + ::= { cLWlanConfigEntry 39 } + +cLWlanRadiusAuthFifthServer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..21)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Fifth + Radius Authentication Server for this wlan." + ::= { cLWlanConfigEntry 40 } + +cLWlanRadiusAuthSixthServer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..21)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Sixth + Radius Authentication Server for this wlan." + ::= { cLWlanConfigEntry 41 } + +cLWlanRadiusAcctFourthServer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..21)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Fourth + Radius Accounting Server for this wlan." + ::= { cLWlanConfigEntry 42 } + +cLWlanRadiusAcctFifthServer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..21)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Fifth + Radius Accounting Server for this wlan." + ::= { cLWlanConfigEntry 43 } + +cLWlanRadiusAcctSixthServer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..21)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Sixth + Radius Accounting Server for this wlan." + ::= { cLWlanConfigEntry 44 } + +cLWlanSelfAnchorEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies whether self anchoring + is enabled for the wlan." + DEFVAL { false } + ::= { cLWlanConfigEntry 64 } + +cLWlanUniversalAdmin OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object allows universal admin mode. + to be enabled on a 802.1X/WPA/WPA2 secured WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 65 } + +cLWlan11acMuMimoEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure 11ac Mu Mimo mode for + the WLAN. + A value of 'true' enables Mu Mimo mode for the WLAN. + A value of 'false' disables Mu Mimo mode for the WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 66 } + +cLWlan11vDisassocImmiEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates whether 11v BSS Transition Disassociation + Imminent is enabled on the controller for this WLAN. + A value of 'true' indicates Disassociation Imminent is enabled + for the WLAN. + A value of 'false' indicates Disassociation Imminent is disabled + for the WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 67 } + +cLWlan11vDisassocTimer OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "Target Beacons Transmission Times" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates 11v BSS Transition Disassociation + Imminent timer for this WLAN." + DEFVAL { 200 } + ::= { cLWlanConfigEntry 73 } + +cLWlan11vOpRoamDisassocTimer OBJECT-TYPE + SYNTAX Unsigned32 (0..40) + UNITS "Target Beacon Transmission Times" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates 11v BSS Transition Optimized Roaming + Disassociation Imminent timer for this WLAN." + ::= { cLWlanConfigEntry 74 } + +cLWlan11vBssTransEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates whether 11v BSS Transition is enabled on + the controller for this WLAN. + A value of 'true' indicates BSS Transition is enabled for the + WLAN. + A value of 'false' indicates BSS Transition is disabled for the + WLAN." + DEFVAL { false } + ::= { cLWlanConfigEntry 93 } + + +-- ******************************************************************** +-- * WLAN 11u Table +-- ******************************************************************** + +cLWlan11uTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlan11uEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the generic 802.11u + configuration for a particular WLAN in a + controller. + + This table has a one-to-one relationship with + cLWlanConfigTable. There exist a row in this + table corresponding to each row representing + a WLAN in cLWlanConfigTable." + ::= { ciscoLwappWlan11uConfig 1 } + +cLWlan11uEntry OBJECT-TYPE + SYNTAX CLWlan11uEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the generic 802.11u + configuration for a WLAN." + INDEX { cLWlanIndex } + ::= { cLWlan11uTable 1 } + +CLWlan11uEntry ::= SEQUENCE { + cLWlan11uStatus TruthValue, + cLWlan11uInternetAccess TruthValue, + cLWlan11uNetworkType INTEGER, + cLWlan11uVenueGroup INTEGER, + cLWlan11uVenueType INTEGER, + cLWlan11uVenueName SnmpAdminString, + cLWlan11uHessid MacAddress, + cLWlan11uNetworkAuthType INTEGER, + cLWlan11uIpAddressAvailIpv4 INTEGER, + cLWlan11uIpAddressAvailIpv6 INTEGER +} + +cLWlan11uStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to configure the 802.11u support + for this WLAN. A value of 'true' indicates that 802.11u + support is enabled for this WLAN and a value of 'false' + indicates that the support is disabled for this WLAN." + DEFVAL { false } + ::= { cLWlan11uEntry 1 } + +cLWlan11uInternetAccess OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to configure the internet access + with respect to 802.11u feature for this WLAN. + A value of 'true' indicates that internet access is + enabled for this WLAN and a value of 'false' indicates + that the internet access is disabled for this WLAN." + DEFVAL { true } + ::= { cLWlan11uEntry 2 } + +cLWlan11uNetworkType OBJECT-TYPE + SYNTAX INTEGER { + invalid(1), + private(2), + privateWithGuestAccess(3), + chargeablePublicNetwork(4), + freePublicNetwork(5), + testOrEquipment(6), + wildcard(7), + personnalDeviceNetwork(8), + emgerencyServiceOnlyNetwork(9), + notConfigured(255) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the network type with respect + to 802.11u feature , for this WLAN. + invalid (1) : Invalid network type. + private(2) : Non-authorized users are not + permitted on this network. + privateWithGuestAccess(3) : Private network but guest + accounts area available. + chargeablePublicNetwork(4) : The network is accessible to + anyone, however, access to the + network requires payment. + freePublicNetwork(5) : The network is accessible to + anyone and no charges apply + for the network use. + testOrEquipment(6) : The network is used for test or + experimental purposes only. + wildcard(6) : Wildcard network type. + personnalDeviceNetwork(8) : The network is accessible only + by Personnal Device. + emgerencyServiceOnlyNetwork(9) : Emergency Service + network Type." + ::= { cLWlan11uEntry 3 } + +cLWlan11uVenueGroup OBJECT-TYPE + SYNTAX INTEGER { + unspecified(1), + assembly(2), + business(3), + educational(4), + factoryAndIndustrial(5), + institutional(6), + mercantile(7), + residential(8), + storage(9), + utilityAndMisc(10), + vehicular(11), + outdoor(12) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This object indicates the venue group with respect + to 802.11u feature , for this WLAN." + DEFVAL { unspecified } + ::= { cLWlan11uEntry 4 } + +cLWlan11uVenueType OBJECT-TYPE + SYNTAX INTEGER { + unspecified(1), + assembly(2), + business(3), + educational(4), + factoryAndIndustrial(5), + institutional(6), + mercantile(7), + residential(8), + storage(9), + utilityAndMisc(10), + vehicular(11), + outdoor(12) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This object indicates the venue type within + a particular venue group, with respect + to 802.11u feature , for this WLAN. + The Venue group-Venue Type relationship is per + the following table: + Venue Group Venue Type Code Venue Description + =========== =============== ================= + 0 0 Unspecified + 0 1-255 Reserved + 1 0 Unspecified Assembly + 1 1 Arena + 1 2 Stadium + 1 3 Passenger Terminal (e.g., + airport, port, bus station, ferry + terminal, train station) + 1 4 Amphitheater + 1 5 Amusement Park + 1 6 Place of Worship + 1 7 Convention Center + 1 8 Library + 1 9 Museum + 1 10 Restaurant + 1 11 Theater + 1 12 Bar + 1 13 Coffee Shop + 1 14 Zoo or Aquarium + 1 15 Emergency Coordination Center + 1 16-255 Reserved + 2 0 Unspecified Business + 2 1 Doctor or Dentist office + 2 2 Bank + 2 3 Fire Station + 2 4 Police Station + 2 6 Post Office + 2 7 Professional Office + 2 8 Research and Development Facility + 2 9 Attorney Office + 2 10-255 Reserved + 3 0 Unspecified Educational + 3 1 School, Primary + 3 2 School, Secondary + 3 3 University or College + 3 4-255 Reserved + 4 0 Unspecified Factory and Industrial + 4 1 Factory + 4 2-255 Reserved + 5 0 Unspecified Institutional + 5 1 Hospital + 5 2 Long-Term Care Facility (e.g., + Nursing home, Hospice, etc.) + 5 3 Alcohol and Drug Re-habilitation + Center + 5 4 Group Home + 5 5 Prison or Jail + 5 6-255 Reserved + 6 0 Unspecified Mercantile + 6 1 Retail Store + 6 2 Grocery Market + 6 3 Automotive Service Station + 6 4-255 Reserved + 7 0 Unspecified Residential + 7 1 Hotel or Motel + 7 2 Dormitory + 7 3 Boarding House + 7 4-255 Reserved + 8 0-255 Reserved + 9 0-255 Reserved + 10 0 Unspecified Vehicular + 10 1 Automobile or Truck + 10 2 Airplane + 10 3 Bus + 10 4 Ferry + 10 5 Ship or Boat + 10 6 Train + 10 7-255 Reserved + 11 0 Unspecified Outdoor + 11 1 Muni-mesh Network + 11 2 City Park + 11 3-255 Reserved" + DEFVAL { unspecified } + ::= { cLWlan11uEntry 5 } + +cLWlan11uVenueName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..255)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This is the venue name defined for this WLAN + with respect to 802.11u feature." + ::= { cLWlan11uEntry 6 } + +cLWlan11uHessid OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to configure the Hessid for this WLAN." + ::= { cLWlan11uEntry 8 } + +cLWlan11uNetworkAuthType OBJECT-TYPE + SYNTAX INTEGER { + acceptance(1), + enrollment(2), + redirection(3), + dnsRedirection(4), + notConfigured(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to configure the NetworkAuthType + for a WLAN" + DEFVAL { notConfigured } + ::= { cLWlan11uEntry 9 } + +cLWlan11uIpAddressAvailIpv4 OBJECT-TYPE + SYNTAX INTEGER { + notAvailable(1), + public(2), + portRestricted(3), + singleNATPrivate(4), + doubleNATPrivate(5), + portRestrictedAndSingleNATPrivate(6), + portRestrictedAndDoubleNATPrivate(7), + unKnown(8) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the IPv4 Address Availability." + DEFVAL { notAvailable } + ::= { cLWlan11uEntry 10 } + +cLWlan11uIpAddressAvailIpv6 OBJECT-TYPE + SYNTAX INTEGER { + notAvailable(1), + available(2), + unKnown(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the IPv6 Address Availability." + DEFVAL { notAvailable } + ::= { cLWlan11uEntry 11 } + + +-- ******************************************************************** +-- * WLAN 11u OUI Table +-- ******************************************************************** + +cLWlan11uOuiTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlan11uOuiEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the OUI + (organizational unique identifier) + configuration for a particular WLAN. + OUIs are assigned by IEEE. + A WLAN can have up to 32 OUIs defined. + OUI configuration per WLAN is required + for the 802.11u feature to work. + + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLWlan11uOuiRowStatus object." + ::= { ciscoLwappWlan11uConfig 2 } + +cLWlan11uOuiEntry OBJECT-TYPE + SYNTAX CLWlan11uOuiEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the OUI + (organizational unique identifier) + configuration for a particular WLAN. + OUIs are assigned by IEEE. + A WLAN can have up to 32 OUIs defined. + OUI configuration per WLAN is required + for the 802.11u feature to work." + INDEX { + cLWlanIndex, + cLWlan11uOuiIndex + } + ::= { cLWlan11uOuiTable 1 } + +CLWlan11uOuiEntry ::= SEQUENCE { + cLWlan11uOuiIndex Unsigned32, + cLWlan11uOui OCTET STRING, + cLWlan11uOuiIsBeacon TruthValue, + cLWlan11uOuiRowStatus RowStatus, + cLWlan11uOuiStorageType StorageType +} + +cLWlan11uOuiIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of a OUI + on a WLAN.Each WLAN can have up to 32 OUIs defined. + Each OUI should be unique." + ::= { cLWlan11uOuiEntry 1 } + +cLWlan11uOui OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (6 | 10)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The OUI field is a public OUI assigned by the IEEE. + Each OUI identifies a roaming consortium + (group of SSPs with inter-SSP roaming agreement) + or a single SSP.WLAN can have up to 32 OUIs defined. + Each OUI defined for a WLAN should be unique. + For example the value for Cisco is 004096." + ::= { cLWlan11uOuiEntry 2 } + +cLWlan11uOuiIsBeacon OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure this particular + OUI as one of the beacon OUIs. + Beacon can carry at most 3 OUIs. + User should be able to select 0-3 OUIs + (from the already configured OUIs for this WLAN). + A value of 'true' indicates that this OUI would + be carried in beacon. A value of 'false' + indicates that this OUI is not a beacon OUI." + DEFVAL { false } + ::= { cLWlan11uOuiEntry 3 } + +cLWlan11uOuiRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular + OUI entry in the table." + ::= { cLWlan11uOuiEntry 4 } + +cLWlan11uOuiStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represnts the storage type for this + conceptual row." + DEFVAL { nonVolatile } + ::= { cLWlan11uOuiEntry 5 } + + +-- ******************************************************************** +-- * WLAN 11u Realm Table +-- ******************************************************************** + +cLWlan11uRealmTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlan11uRealmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the realm (NAI) details per WLAN. + In order to provide roaming services, + it is necessary to have a standardized method for + identifying users. NAI is the user identity + submitted by the client during network authentication. + Each realm entry should be unique." + ::= { ciscoLwappWlan11uConfig 3 } + +cLWlan11uRealmEntry OBJECT-TYPE + SYNTAX CLWlan11uRealmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the realm (NAI) + configuration for a particular WLAN.A WLAN can have + up to 32 realm defined" + INDEX { + cLWlanIndex, + cLWlan11uRealmIndex + } + ::= { cLWlan11uRealmTable 1 } + +CLWlan11uRealmEntry ::= SEQUENCE { + cLWlan11uRealmIndex Unsigned32, + cLWlan11uRealmName SnmpAdminString, + cLWlan11uRealmRowStatus RowStatus +} + +cLWlan11uRealmIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..128) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies, one instance of + a realm EAP entry (NAI) on a WLAN. + Each realm entry should be unique." + ::= { cLWlan11uRealmEntry 1 } + +cLWlan11uRealmName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..128)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the NAI name. + In order to provide roaming services, + it is necessary to have a standardized method for + identifying users. NAI is the user identity + submitted by the client during network authentication. + In roaming, the purpose of the NAI is to identify the + user as well as to assist in the routing of the authentication + request. + Please note that the NAI may not necessarily be + the same as the user's e-mail address or the user identity + submitted in an application layer authentication." + ::= { cLWlan11uRealmEntry 2 } + +cLWlan11uRealmRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular realm + entry (NAI)from the table" + ::= { cLWlan11uRealmEntry 3 } + + +-- ******************************************************************** +-- * WLAN 11u Realm Eap Table +-- ******************************************************************** + +cLWlan11uRealmEapTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlan11uRealmEapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the EAP method configured per realm + for a particular WLAN. A realm can have up to 4 EAP + method defined. The EAP method supported are + LEAP,PEAP,EAP-FAST and EAP-TLS." + ::= { ciscoLwappWlan11uConfig 4 } + +cLWlan11uRealmEapEntry OBJECT-TYPE + SYNTAX CLWlan11uRealmEapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the EAP method + configured per realm for a particular WLAN. + A realm can have up to 4 EAP method defined. + The EAP method supported are LEAP,PEAP,EAP-FAST and EAP-TLS." + INDEX { + cLWlanIndex, + cLWlan11uRealmIndex, + cLWlan11uRealmEapIndex + } + ::= { cLWlan11uRealmEapTable 1 } + +CLWlan11uRealmEapEntry ::= SEQUENCE { + cLWlan11uRealmEapIndex Unsigned32, + cLWlan11uRealmEapMethod INTEGER, + cLWlan11uRealmEapRowStatus RowStatus +} + +cLWlan11uRealmEapIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of + a EAP entry configured per a realm for a particular WLAN." + ::= { cLWlan11uRealmEapEntry 1 } + +cLWlan11uRealmEapMethod OBJECT-TYPE + SYNTAX INTEGER { + none(1), + leap(2), + peap(3), + eapTls(4), + eapFast(5), + eapSim(6), + eapTtls(7), + eapAka(8) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the EAP method defined." + ::= { cLWlan11uRealmEapEntry 2 } + +cLWlan11uRealmEapRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular EAP + entry from the table" + ::= { cLWlan11uRealmEapEntry 3 } + + +-- ******************************************************************** +-- * WLAN 11u Realm Eap Auth Table +-- ******************************************************************** + +cLWlan11uRealmEapAuthTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlan11uRealmEapAuthEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the authentication method details + configured per EAP method for particular realm. + There can be up to 10 authentication configuration + entries per EAP method." + ::= { ciscoLwappWlan11uConfig 5 } + +cLWlan11uRealmEapAuthEntry OBJECT-TYPE + SYNTAX CLWlan11uRealmEapAuthEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the authentication + method details configured per EAP method for particular realm. + There can be up to 10 authentication configuration + entries per EAP method." + INDEX { + cLWlanIndex, + cLWlan11uRealmIndex, + cLWlan11uRealmEapIndex, + cLWlan11uRealmEapAuthIndex + } + ::= { cLWlan11uRealmEapAuthTable 1 } + +CLWlan11uRealmEapAuthEntry ::= SEQUENCE { + cLWlan11uRealmEapAuthIndex Unsigned32, + cLWlan11uRealmEapAuthMethod INTEGER, + cLWlan11uRealmEapAuthParam INTEGER, + cLWlan11uRealmEapAuthCredentialType INTEGER, + cLWlan11uRealmEapAuthRowStatus RowStatus +} + +cLWlan11uRealmEapAuthIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of + a auth entry configured per a EAP for a particular WLAN." + ::= { cLWlan11uRealmEapAuthEntry 1 } + +cLWlan11uRealmEapAuthMethod OBJECT-TYPE + SYNTAX INTEGER { + nonEapInnerAuthType(1), + innerAuthEapType(2), + credentialType(3), + tunneledEapCredentialType(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the authentication method defined." + DEFVAL { nonEapInnerAuthType } + ::= { cLWlan11uRealmEapAuthEntry 2 } + +cLWlan11uRealmEapAuthParam OBJECT-TYPE + SYNTAX INTEGER { + none(1), + pap(2), + chap(3), + mschap(4), + mschapV2(5), + leap(6), + peap(7), + eapTls(8), + eapFast(9), + eapSim(10), + eapTtls(11), + eapAka(12), + sim(13), + usim(14), + nfcSecure(15), + hardwareToken(16), + softToken(17), + certificate(18), + usernamePassword(19), + reserved(20), + anonynous(21), + vendorSpecific(22) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the authentication parameter + defined for a particular authentication method. + The Autentication Parameter and the Authentication Method + relationship as follows + + Method Parameter Description + =========== =============== ================= + 1 1 Reserved + 1 2 PAP + 1 3 CHAP + 1 4 MSCHAP + 1 5 MSCHAPV2 + 2 6 LEAP + 2 7 PEAP + 2 8 EAP-TLS + 2 9 EAP-FAST + 2 10 EAP-SIM + 2 11 EAP-TTLS + 2 12 EAP-AKA + 3 13 SIM + 3 14 USIM + 3 15 NFCSECURE + 3 16 HARDWARE TOKEN + 3 17 SOFT TOKEN + 3 18 CERTIFICATE + 3 19 USERNAME PASSWORD + 3 20 RESERVED + 3 21 Anonynous + 3 22 Vendor Specific" + DEFVAL { none } + ::= { cLWlan11uRealmEapAuthEntry 3 } + +cLWlan11uRealmEapAuthCredentialType OBJECT-TYPE + SYNTAX INTEGER { + sim(1), + usim(2), + nfcSecure(3), + hardwareToken(4), + softToken(5), + certificate(6), + usernamePassword(7), + reserved(8), + anonynous(9), + vendorSpecific(10) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the credential type defined for a particular + authentication method." + DEFVAL { sim } + ::= { cLWlan11uRealmEapAuthEntry 4 } + +cLWlan11uRealmEapAuthRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular auth + entry from the table" + ::= { cLWlan11uRealmEapAuthEntry 5 } + + +-- ******************************************************************** +-- * WLAN 11u Domain Table +-- ******************************************************************** + +cLWlan11uDomainTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlan11uDomainEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the Domain Entry + configuration for a particular WLAN in a + controller. + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLWlan11uDomainRowStatus object" + ::= { ciscoLwappWlan11uConfig 6 } + +cLWlan11uDomainEntry OBJECT-TYPE + SYNTAX CLWlan11uDomainEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the Domain + configuration for a particular WLAN. + A WLAN can have up to 10 domains defined." + INDEX { + cLWlanIndex, + cLWlan11uDomainIndex + } + ::= { cLWlan11uDomainTable 1 } + +CLWlan11uDomainEntry ::= SEQUENCE { + cLWlan11uDomainIndex Unsigned32, + cLWlan11uDomainName SnmpAdminString, + cLWlan11uDomainRowStatus RowStatus +} + +cLWlan11uDomainIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..32) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of a Domain + on a WLAN.Each WLAN can have up to 10 Domains defined. + Each Domain should be unique." + ::= { cLWlan11uDomainEntry 1 } + +cLWlan11uDomainName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..255)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the domain name for this particular + Index." + ::= { cLWlan11uDomainEntry 2 } + +cLWlan11uDomainRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular + Domain entry in the table." + ::= { cLWlan11uDomainEntry 3 } + + +-- ******************************************************************** +-- * WLAN 11u 3gpp Table +-- ******************************************************************** + +cLWlan11u3gppTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlan11u3gppEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the 3gpp info + configuration for a particular WLAN in a + controller. + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLWlan11u3gppRowStatus object" + ::= { ciscoLwappWlan11uConfig 7 } + +cLWlan11u3gppEntry OBJECT-TYPE + SYNTAX CLWlan11u3gppEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the Domain + configuration for a particular WLAN. + A WLAN can have up to 32 operator defined." + INDEX { + cLWlanIndex, + cLWlan11u3gppIndex + } + ::= { cLWlan11u3gppTable 1 } + +CLWlan11u3gppEntry ::= SEQUENCE { + cLWlan11u3gppIndex Unsigned32, + cLWlan11u3gppCountryCode OCTET STRING, + cLWlan11u3gppNetworkCode OCTET STRING, + cLWlan11u3gppRowStatus RowStatus +} + +cLWlan11u3gppIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..32) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of a 3gpp + on a WLAN.Each WLAN can have up to 32 3gpps defined. + Each 3gpp should be unique." + ::= { cLWlan11u3gppEntry 1 } + +cLWlan11u3gppCountryCode OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the Language defined for this 3gpp Index." + ::= { cLWlan11u3gppEntry 2 } + +cLWlan11u3gppNetworkCode OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the Language defined for this 3gpp Index." + ::= { cLWlan11u3gppEntry 3 } + +cLWlan11u3gppRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular + 3gpp entry in the table." + ::= { cLWlan11u3gppEntry 4 } + + +-- ******************************************************************** +-- * WLAN Service Advertisement Table +-- ******************************************************************** + +cLWlanServiceAdvertisementTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanServiceAdvertisementEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the generic service advertisement + configuration for a particular WLAN in a + controller. + + This table has a one-to-one relationship with + cLWlanConfigTable. There exist a row in this + table corresponding to each row representing + a WLAN in cLWlanConfigTable." + ::= { ciscoLwappWlanServiceAdvertisementConfig 1 } + +cLWlanServiceAdvertisementEntry OBJECT-TYPE + SYNTAX CLWlanServiceAdvertisementEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the generic 802.11u + configuration for a WLAN." + INDEX { cLWlanIndex } + ::= { cLWlanServiceAdvertisementTable 1 } + +CLWlanServiceAdvertisementEntry ::= SEQUENCE { + cLWlanServiceAdvertisementStatus TruthValue, + cLWlanServiceAdvertisementMsapServerIndex Unsigned32 +} + +cLWlanServiceAdvertisementStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the MSAP status for this WLAN. + A value of true enables MSAP for this WLAN. + A value of false disbales MSAP for this WLAN." + DEFVAL { false } + ::= { cLWlanServiceAdvertisementEntry 1 } + +cLWlanServiceAdvertisementMsapServerIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the Index for the MSAP Server." + ::= { cLWlanServiceAdvertisementEntry 5 } + + + +cLWlanHotSpot2OperatorTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanHotSpot2OperatorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the Operator + configuration for a particular WLAN in a + controller. + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLWlanHotSpot2OperatorRowStatus object" + ::= { ciscoLwappWlanHotSpot2Config 1 } + +cLWlanHotSpot2OperatorEntry OBJECT-TYPE + SYNTAX CLWlanHotSpot2OperatorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the Domain + configuration for a particular WLAN. + A WLAN can have up to 32 operator defined." + INDEX { + cLWlanIndex, + cLWlanHotSpot2OperatorIndex + } + ::= { cLWlanHotSpot2OperatorTable 1 } + +CLWlanHotSpot2OperatorEntry ::= SEQUENCE { + cLWlanHotSpot2OperatorIndex Unsigned32, + cLWlanHotSpot2OperatorName SnmpAdminString, + cLWlanHotSpot2OperatorLanguage SnmpAdminString, + cLWlanHotSpot2OperatorRowStatus RowStatus +} + +cLWlanHotSpot2OperatorIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..32) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of a Operator + on a WLAN.Each WLAN can have up to 32 Operators defined. + Each Operator should be unique." + ::= { cLWlanHotSpot2OperatorEntry 1 } + +cLWlanHotSpot2OperatorName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..255)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the Operator name for this particular + Index." + ::= { cLWlanHotSpot2OperatorEntry 2 } + +cLWlanHotSpot2OperatorLanguage OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..3)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the Language defined for this Operator Index." + ::= { cLWlanHotSpot2OperatorEntry 3 } + +cLWlanHotSpot2OperatorRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular + Operator entry in the table." + ::= { cLWlanHotSpot2OperatorEntry 4 } + + + +cLWlanHotSpot2PortConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanHotSpot2PortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of + Port-Protocol Configuration on a WLAN.Each WLAN can + have up to 10 port configuration defined.Each configuration + should be unique." + ::= { ciscoLwappWlanHotSpot2Config 2 } + +cLWlanHotSpot2PortConfigEntry OBJECT-TYPE + SYNTAX CLWlanHotSpot2PortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the Port-Protocol + configuration for a particular WLAN. + A WLAN can have up to 10 port configurations defined." + INDEX { + cLWlanIndex, + cLWlanHotSpot2PortConfigIndex + } + ::= { cLWlanHotSpot2PortConfigTable 1 } + +CLWlanHotSpot2PortConfigEntry ::= SEQUENCE { + cLWlanHotSpot2PortConfigIndex Unsigned32, + cLWlanHotSpot2PortConfigIpProtocol INTEGER, + cLWlanHotSpot2PortConfigPortNumber INTEGER, + cLWlanHotSpot2PortConfigStatus INTEGER, + cLWlanHotSpot2PortConfigRowStatus RowStatus +} + +cLWlanHotSpot2PortConfigIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies one instance of a Port + Configuration on a WLAN.Each WLAN can have up to 32 Port + Configurations defined.Each Port Configuration should be + unique." + ::= { cLWlanHotSpot2PortConfigEntry 1 } + +cLWlanHotSpot2PortConfigIpProtocol OBJECT-TYPE + SYNTAX INTEGER { + icmp(1), + ftp(6), + ikev2(17), + esp(50) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the Port Ip protocol + for this index for a WLAN" + ::= { cLWlanHotSpot2PortConfigEntry 2 } + +cLWlanHotSpot2PortConfigPortNumber OBJECT-TYPE + SYNTAX INTEGER { + icmp-esp(0), + ftp(20), + ssh(22), + ttls-vpn(443), + ikev2(500), + pptp-vpn(1723), + ipsec-nat(4500), + voip(5060) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the Port Number for this index + for a WLAN. This object indicates the Port Number + with respect to an IP Protocol. + The Protocol Port Number relationship is per + the following table: + IP Protocol Port Number Description + =========== =============== ================= + 1 0 ICMP + 6 20 FTP + 6 22 SSH + 6 443 TLS + 6 1723 PPTP-VPN + 6 5060 VoIP + 17 5060 VoIP + 17 4500 IKEv + 17 500 IKEv2 + 50 0 ESP" + ::= { cLWlanHotSpot2PortConfigEntry 3 } + +cLWlanHotSpot2PortConfigStatus OBJECT-TYPE + SYNTAX INTEGER { + closed(1), + open(2), + unknown(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the Port Status + for this instance for a WLAN" + ::= { cLWlanHotSpot2PortConfigEntry 4 } + +cLWlanHotSpot2PortConfigRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular + PortConfig entry in the table." + ::= { cLWlanHotSpot2PortConfigEntry 5 } + + + +cLWlanHotSpot2ConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanHotSpot2ConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the generic HotSpot2 + configuration for a particular WLAN in a + controller. + + This table has a one-to-one relationship with + cLWlanConfigTable. There exist a row in this + table corresponding to each row representing + a WLAN in cLWlanConfigTable." + ::= { ciscoLwappWlanHotSpot2Config 3 } + +cLWlanHotSpot2ConfigEntry OBJECT-TYPE + SYNTAX CLWlanHotSpot2ConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the generic HotSpot2 + configuration for a WLAN." + INDEX { cLWlanIndex } + ::= { cLWlanHotSpot2ConfigTable 1 } + +CLWlanHotSpot2ConfigEntry ::= SEQUENCE { + cLWlanHotSpot2WanLinkStatus INTEGER, + cLWlanHotSpot2WanSymLinkStatus INTEGER, + cLWlanHotSpot2WanDownLinkSpeed Unsigned32, + cLWlanHotSpot2WanUpLinkSpeed Unsigned32 +} + +cLWlanHotSpot2WanLinkStatus OBJECT-TYPE + SYNTAX INTEGER { + linkUp(1), + linkDown(2), + linkInTestState(3), + notConfigured(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the status of the link with respect to + WAN metrics configuration." + ::= { cLWlanHotSpot2ConfigEntry 1 } + +cLWlanHotSpot2WanSymLinkStatus OBJECT-TYPE + SYNTAX INTEGER { + different(1), + same(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the symmetry of the link with respect to + WAN metrics configuration. A value of 'different(1)' + indicates that link speed is different in uplink and + downlink(ex:ADSL). A value of 'same(2)' indicates that + link speed is same in uplink and downlink(ex:DSL)." + ::= { cLWlanHotSpot2ConfigEntry 2 } + +cLWlanHotSpot2WanDownLinkSpeed OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the down link speed of WAN Backhaul + in kbps." + ::= { cLWlanHotSpot2ConfigEntry 3 } + +cLWlanHotSpot2WanUpLinkSpeed OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the up link speed of WAN Backhaul + in kbps." + ::= { cLWlanHotSpot2ConfigEntry 4 } + + + +cLAPGroupsHyperlocationConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupsHyperlocationConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for configuring Hyperlocation + settings allowed for each AP Group. + Each site can have a set of HALO and PakRSSI + parameters associated with it." + ::= { ciscoLwappAPGroupsHyperlocationConfig 1 } + +cLAPGroupsHyperlocationConfigEntry OBJECT-TYPE + SYNTAX CLAPGroupsHyperlocationConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupsHyperlocationConfigEntry. + cLAPGroupName is mandatory for creating an entry in + CLAPGroupsHyperlocationConfigEntry ." + INDEX { cLAPGroupName } + ::= { cLAPGroupsHyperlocationConfigTable 1 } + +CLAPGroupsHyperlocationConfigEntry ::= SEQUENCE { + cLAPGroupsHyperlocationEnable TruthValue, + cLAPGroupsPakRssiThreshold Integer32, + cLAPGroupsPakRssiThresholdTrigger Gauge32, + cLAPGroupsPakRssiNtpIpAddressType InetAddressType, + cLAPGroupsPakRssiNtpAddress InetAddress +} + +cLAPGroupsHyperlocationEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the state of Hyperlocation. + A value of 'true' indicates that Hyperlocation is enabled. + A value of 'false' indicates that Hyperlocation is disabled." + DEFVAL { false } + ::= { cLAPGroupsHyperlocationConfigEntry 1 } + +cLAPGroupsPakRssiThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the threshold value for + Packet RSSI location feature. Valid range is + -100 dbm to -50 dbm." + DEFVAL { -100 } + ::= { cLAPGroupsHyperlocationConfigEntry 2 } + +cLAPGroupsPakRssiThresholdTrigger OBJECT-TYPE + SYNTAX Gauge32 (1..100) + UNITS "dbm" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the trigger threshold + value for Packet RSSI location feature. Valid + range is 1 dbm to 100 dbm." + DEFVAL { 10 } + ::= { cLAPGroupsHyperlocationConfigEntry 3 } + +cLAPGroupsPakRssiNtpIpAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the NTP server + IP address type for Packet RSSI location feature." + ::= { cLAPGroupsHyperlocationConfigEntry 4 } + +cLAPGroupsPakRssiNtpAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the NTP server + IP address for Packet RSSI location feature." + ::= { cLAPGroupsHyperlocationConfigEntry 5 } + + + +cLAPGroupConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for configuring general parameters for an AP group" + ::= { ciscoLwappAPGroupsVlanConfig 6 } + +cLAPGroupConfigEntry OBJECT-TYPE + SYNTAX CLAPGroupConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupConfigTable for + configuring general parameters for an AP group" + INDEX { cLAPGroupName } + ::= { cLAPGroupConfigTable 1 } + +CLAPGroupConfigEntry ::= SEQUENCE { + cLApGroupPreferMode INTEGER, + cLApGroupGlobalWebAuthConfig TruthValue, + cLApGroupExternalWebAuthUrl CiscoURLStringOrEmpty +} + +cLApGroupPreferMode OBJECT-TYPE + SYNTAX INTEGER { + ipv4(1), + ipv6(2), + disable(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies prefer-mode of AP-Group." + ::= { cLAPGroupConfigEntry 1 } + +cLApGroupGlobalWebAuthConfig OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies whether the web authentication is set + per Ap Group or not. + A value of 'true' indicates that webauth is enabled on Ap Group. + A value of 'false' indicates that webauth is disabled on Ap Group." + DEFVAL { false } + ::= { cLAPGroupConfigEntry 2 } + +cLApGroupExternalWebAuthUrl OBJECT-TYPE + SYNTAX CiscoURLStringOrEmpty + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the URL to which the client webpage + will be directed for authentication when a client joins the + WLAN part of an AP group." + DEFVAL { "" } + ::= { cLAPGroupConfigEntry 3 } + + + +cLAPGroupsPortConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupsPortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for configuring port + settings allowed for each AP Group." + ::= { ciscoLwappAPGroupsPortConfig 1 } + +cLAPGroupsPortConfigEntry OBJECT-TYPE + SYNTAX CLAPGroupsPortConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupsPortConfigEntry. + cLAPGroupName is mandatory for creating a entry in + CLAPGroupsPortConfigEntry ." + INDEX { + cLAPGroupName, + cLAPGroupsLANPortNumber + } + ::= { cLAPGroupsPortConfigTable 1 } + +CLAPGroupsPortConfigEntry ::= SEQUENCE { + cLAPGroupsLANPortNumber Unsigned32, + cLAPGroupsLANPortStatus INTEGER, + cLAPGroupsLANPortPoeStatus INTEGER, + cLAPGroupsLANPortRlanName SnmpAdminString, + cLAPGroupsLANPortRowStatus RowStatus +} + +cLAPGroupsLANPortNumber OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies the LAN port number + of an AP Group. Each AP Group can have up to 3 LAN ports." + ::= { cLAPGroupsPortConfigEntry 1 } + +cLAPGroupsLANPortStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the LAN port state. + A value of 'true' indicates that selected LAN Port is enabled. A value + of 'false' indicates that LAN Port is disabled." + DEFVAL { disabled } + ::= { cLAPGroupsPortConfigEntry 2 } + +cLAPGroupsLANPortPoeStatus OBJECT-TYPE + SYNTAX INTEGER { + notsupported(0), + disabled(1), + enabled(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the LAN port POE state. + A value of 'true' indicates that POE is enabled. A value + of 'false' indicates that POE is disabled." + DEFVAL { disabled } + ::= { cLAPGroupsPortConfigEntry 3 } + +cLAPGroupsLANPortRlanName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..64)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the remote LAN name of the corresponding port." + ::= { cLAPGroupsPortConfigEntry 4 } + +cLAPGroupsLANPortRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the status column for this row and used + to create and delete specific instances of rows + in this table. cLAPGroupName and cLAPGroupsLANPortNumber + are mandatory for creating and deleting an entry." + ::= { cLAPGroupsPortConfigEntry 5 } + + + +cLAPGroupsExtModuleConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupsExtModuleConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for configuring external module settings allowed for each AP Group. + An entry in this table is created for each AP group." + ::= { ciscoLwappAPGroupsPortConfig 2 } + +cLAPGroupsExtModuleConfigEntry OBJECT-TYPE + SYNTAX CLAPGroupsExtModuleConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupsExtModuleConfigEntry. + cLAPGroupName is mandatory for creating an entry in + CLAPGroupsExtModuleConfigEntry ." + INDEX { cLAPGroupName } + ::= { cLAPGroupsExtModuleConfigTable 1 } + +CLAPGroupsExtModuleConfigEntry ::= SEQUENCE { + cLAPGroupsExtModuleStatus INTEGER, + cLAPGroupsExtModuleRlanName SnmpAdminString +} + +cLAPGroupsExtModuleStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the external module state. + A value of 'true' indicates that external module is enabled. A value + of 'false' indicates that external module is disabled." + DEFVAL { disabled } + ::= { cLAPGroupsExtModuleConfigEntry 1 } + +cLAPGroupsExtModuleRlanName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the remote lan name of the external module." + ::= { cLAPGroupsExtModuleConfigEntry 2 } + + +-- ******************************************************************** +-- * AP Groups Vlan Config +-- ******************************************************************** + +cLAPGroupsVlanConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupsVlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for the WLAN-interface-mappings and WLAN-NAC + settings allowed for each configured site. + Each site can have a set of WLANs associated + with it. + + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLAPGroupsVlanConfigRowStatus object." + ::= { ciscoLwappAPGroupsVlanConfig 1 } + +cLAPGroupsVlanConfigEntry OBJECT-TYPE + SYNTAX CLAPGroupsVlanConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupsVlanMappingTable. + cLWlanProfileName is mandatory for creating a entry in + cLWlanConfigEntry." + INDEX { + cLAPGroupName, + cLWlanProfileName + } + ::= { cLAPGroupsVlanConfigTable 1 } + +CLAPGroupsVlanConfigEntry ::= SEQUENCE { + cLAPGroupName OCTET STRING, + cLAPGroupsVlanMappingInterfaceName OCTET STRING, + cLAPGroupNACSupport TruthValue, + cLAPGroupsVlanConfigRowStatus RowStatus, + cLAPGroupsVlanConfigStorageType StorageType, + cLAPGroupsWlanOrderIndex Unsigned32, + cLAPGroupsVlanMappingInterfaceNameRev1 OCTET STRING +} + +cLAPGroupName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..64)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object uniquely identifies a AP group. + The string is an unique name assigned to a site." + ::= { cLAPGroupsVlanConfigEntry 1 } + +cLAPGroupsVlanMappingInterfaceName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..32)) + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "This object represents the interface to be used + when a client connects to the 'cLWlanProfileName' + WLAN on the AP. + When an AP is associated with a site, and the site + has an associated set of WLANs, then only those + WLANs are beamed by the AP. + cLAPGroupsVlanMappingInterfaceName object is superseded + by cLAPGroupsVlanMappingInterfaceNameRev1." + ::= { cLAPGroupsVlanConfigEntry 2 } + +cLAPGroupNACSupport OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to configure the NAC- Out Of + Band(OOB) support for this AP groups VLAN. + A value of 'true' indicates that the AP group + supports the NAC- Out Of Band(OOB) feature. + A value of 'false' indicates that the AP group + does not support the NAC- Out Of Band(OOB) feature." + DEFVAL { false } + ::= { cLAPGroupsVlanConfigEntry 3 } + +cLAPGroupsVlanConfigRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the status column for this row and used + to create and delete specific instances of rows + in this table." + ::= { cLAPGroupsVlanConfigEntry 4 } + +cLAPGroupsVlanConfigStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represnts the storage type for this + conceptual row." + DEFVAL { nonVolatile } + ::= { cLAPGroupsVlanConfigEntry 5 } + +cLAPGroupsWlanOrderIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represnts the position of a wlan in each + AP group. When a WLAN is added to an AP group, it will be + placed in the lowest available slot in an array of size 16. + This index will determine the order in which the WLAN is + applied on an AP in that group." + ::= { cLAPGroupsVlanConfigEntry 6 } + +cLAPGroupsVlanMappingInterfaceNameRev1 OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..128)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the interface to be used + when a client connects to the 'cLWlanProfileName' + WLAN on the AP. + When an AP is associated with a site, and the site + has an associated set of WLANs, then only those + WLANs are beamed by the AP." + ::= { cLAPGroupsVlanConfigEntry 7 } + + + +cLAPGroupsVenueConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupsVenueConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for the configuring Venue details + for a configured site." + ::= { ciscoLwappAPGroupsVlanConfig 2 } + +cLAPGroupsVenueConfigEntry OBJECT-TYPE + SYNTAX CLAPGroupsVenueConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupsVlanMappingTable. + cLWlanProfileName is mandatory for creating a entry in + cLWlanConfigEntry." + INDEX { cLAPGroupName } + ::= { cLAPGroupsVenueConfigTable 1 } + +CLAPGroupsVenueConfigEntry ::= SEQUENCE { + cLAPGroupsVenueConfigVenueGroup INTEGER, + cLAPGroupsVenueConfigVenueType INTEGER, + cLAPGroupsVenueConfigVenueName SnmpAdminString, + cLAPGroupsVenueConfigLanguage SnmpAdminString, + cLAPGroupsOperatingClass BITS +} + +cLAPGroupsVenueConfigVenueGroup OBJECT-TYPE + SYNTAX INTEGER { + unspecified(1), + assembly(2), + business(3), + educational(4), + factoryAndIndustrial(5), + institutional(6), + mercantile(7), + residential(8), + storage(9), + utilityAndMisc(10), + vehicular(11), + outdoor(12) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the venue group + for this AP Group." + DEFVAL { unspecified } + ::= { cLAPGroupsVenueConfigEntry 1 } + +cLAPGroupsVenueConfigVenueType OBJECT-TYPE + SYNTAX INTEGER { + unspecified(1), + unspecifiedAssembly(2), + arena(3), + stadium(4), + passengerTerminal(5), + amphitheater(6), + amusementPark(7), + placeOfWorship(8), + conventionCenter(9), + library(10), + museum(11), + restaurant(12), + theater(13), + bar(14), + coffeeShop(15), + zooOrAquarium(16), + emergencyCoordinationCenter(17), + unspecifiedBusiness(18), + doctorOrDentistOffice(19), + bank(20), + fireStation(21), + policeStation(22), + postOffice(23), + professionalOffice(24), + researchAndDevelopmentFacility(25), + attorneyOffice(26), + unspecifiedEducational(27), + schoolPrimary(28), + schoolSecondary(29), + universityOrCollege(30), + unspecifiedFactoryAndIndustrial(31), + factory(32), + unspecifiedInstitutional(33), + hospital(34), + longTermCareFacility(35), + alcoholAndDrugRehabilitationCenter(36), + groupHome(37), + prisonOrJail(38), + unspecifiedMercantile(39), + retailStore(40), + groceryMarket(41), + atomotiveServiceStation(42), + shoppingMall(43), + gasStation(44), + unspecifiedResidential(45), + privateResidence(46), + hotelOrMotel(47), + dormitory(48), + boardingHouse(49), + unspecifiedStorage(50), + unspecifiedUtility(51), + unspecifiedVehicular(52), + automobileOrTruck(53), + airplane(54), + bus(55), + ferry(56), + shipOrBoat(57), + train(58), + motorBike(59), + unspecifiedOutdoor(60), + muniMeshNetwork(61), + cityPark(62), + restArea(63), + trafficControl(64), + busStop(65), + kiosk(66) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the venue type within + a particular venue group,for this AP Group. + The Venue group-Venue Type relationship is per + the following table: + Venue Group Venue Type Code Venue Description + =========== =============== ================= + 0 0 Unspecified + 0 1-255 Reserved + 1 0 Unspecified Assembly + 1 1 Arena + 1 2 Stadium + 1 3 Passenger Terminal (e.g., + airport, port, bus station, + ferry terminal, train station) + 1 4 Amphitheater + 1 5 Amusement Park + 1 6 Place of Worship + 1 7 Convention Center + 1 8 Library + 1 9 Museum + 1 10 Restaurant + 1 11 Theater + 1 12 Bar + 1 13 Coffee Shop + 1 14 Zoo or Aquarium + 1 15 Emergency Coordination Center + 1 16-255 Reserved + 2 0 Unspecified Business + 2 1 Doctor or Dentist office + 2 2 Bank + 2 3 Fire Station + 2 4 Police Station + 2 6 Post Office + 2 7 Professional Office + 2 8 Research and Development + Facility + 2 9 Attorney Office + 2 10-255 Reserved + 3 0 Unspecified Educational + 3 1 School, Primary + 3 2 School, Secondary + 3 3 University or College + 3 4-255 Reserved + 4 0 Unspecified Factory and + Industrial Factory + 4 2-255 Reserved + 5 0 Unspecified Institutional + 5 1 Hospital + 5 2 Long-Term Care Facility (e.g., + Nursing home, Hospice, etc.) + 5 3 Alcohol and Drug Re-habilitation + Center + 5 4 Group Home + 5 5 Prison or Jail + 5 6-255 Reserved + 6 0 Unspecified Mercantile + 6 1 Retail Store + 6 2 Grocery Market + 6 3 Automotive Service Station + 6 4-255 Reserved + 7 0 Unspecified Residential + 7 1 Hotel or Motel + 7 2 Dormitory + 7 3 Boarding House + 7 4-255 Reserved + 8 0-255 Reserved + 9 0-255 Reserved + 10 0 Unspecified Vehicular + 10 1 Automobile or Truck + 10 2 Airplane + 10 3 Bus + 10 4 Ferry + 10 5 Ship or Boat + 10 6 Train + 10 7-255 Reserved + 11 0 Unspecified Outdoor + 11 1 Muni-mesh Network + 11 2 City Park + 11 3-255 Reserved" + DEFVAL { unspecified } + ::= { cLAPGroupsVenueConfigEntry 2 } + +cLAPGroupsVenueConfigVenueName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..252)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the venue name defined for this AP Group." + ::= { cLAPGroupsVenueConfigEntry 3 } + +cLAPGroupsVenueConfigLanguage OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..3)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the Language defined for this AP Group." + ::= { cLAPGroupsVenueConfigEntry 4 } + +cLAPGroupsOperatingClass OBJECT-TYPE + SYNTAX BITS { + class81(0), + class83(1), + class84(2), + class112(3), + class113(4), + class115(5), + class116(6), + class117(7), + class118(8), + class119(9), + class120(10), + class121(11), + class122(12), + class123(13), + class124(14), + class125(15), + class126(16), + class127(17) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the the group of channels on the + frequency band(s) the access network operates." + ::= { cLAPGroupsVenueConfigEntry 5 } + + + +cLAPGroupsMultipleVenueTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupsMultipleVenueEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table for configuring multiple venues + for a configured site." + ::= { ciscoLwappAPGroupsVlanConfig 3 } + +cLAPGroupsMultipleVenueEntry OBJECT-TYPE + SYNTAX CLAPGroupsMultipleVenueEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupsMultipleVenueTable. + cLAPGroupsMultipleVenueLanguage is mandatory + for creating a row in this table." + INDEX { + cLAPGroupName, + cLAPGroupsMultipleVenueLanguage + } + ::= { cLAPGroupsMultipleVenueTable 1 } + +CLAPGroupsMultipleVenueEntry ::= SEQUENCE { + cLAPGroupsMultipleVenueLanguage SnmpAdminString, + cLAPGroupsMultipleVenueName SnmpAdminString, + cLAPGroupsMultipleVenueRowStatus RowStatus +} + +cLAPGroupsMultipleVenueLanguage OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..3)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This is the Language defined for the particular venue name + entry." + ::= { cLAPGroupsMultipleVenueEntry 1 } + +cLAPGroupsMultipleVenueName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..252)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the one of the venue names defined for this AP Group." + ::= { cLAPGroupsMultipleVenueEntry 2 } + +cLAPGroupsMultipleVenueRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular + venue entry in the table." + ::= { cLAPGroupsMultipleVenueEntry 3 } + + + +cLAPGroupNasIdConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupNasIdConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for the configuring NAS-ID for an AP group." + ::= { ciscoLwappAPGroupNasIdConfig 1 } + +cLAPGroupNasIdConfigEntry OBJECT-TYPE + SYNTAX CLAPGroupNasIdConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupNasIdConfigTable for the configuring NAS-ID for an AP group." + INDEX { cLAPGroupName } + ::= { cLAPGroupNasIdConfigTable 1 } + +CLAPGroupNasIdConfigEntry ::= SEQUENCE { + cLAPGroupNasId SnmpAdminString +} + +cLAPGroupNasId OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the NAS-ID to this AP group + NAS-ID string is sent to radius server by WLC (as radius client) + via authentication request, which can be used to classify users + to different groups then radius server can reply a customized + authentication response" + ::= { cLAPGroupNasIdConfigEntry 1 } + + + +cLAPGroupsPolicyTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupsPolicyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for the policies to be mapped + to each AP group on the controller. + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLAPGroupsPolicyRowStatus object." + ::= { ciscoLwappAPGroupsVlanConfig 4 } + +cLAPGroupsPolicyEntry OBJECT-TYPE + SYNTAX CLAPGroupsPolicyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupsPolicyTable" + INDEX { + cLAPGroupName, + cLAPGroupsPolicyWlanId, + cLAPGroupsPolicyPriIndex + } + ::= { cLAPGroupsPolicyTable 1 } + +CLAPGroupsPolicyEntry ::= SEQUENCE { + cLAPGroupsPolicyWlanId Unsigned32, + cLAPGroupsPolicyPriIndex Unsigned32, + cLAPGroupsPolicyIndex Unsigned32, + cLAPGroupsPolicyWlanProfile SnmpAdminString, + cLAPGroupsPolicyRowStatus RowStatus +} + +cLAPGroupsPolicyWlanId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the Index of the WLAN + on which the Policy will get applied. The WLAN + should be present on the AP group." + ::= { cLAPGroupsPolicyEntry 1 } + +cLAPGroupsPolicyPriIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object represents the Priority Index of the policy + configured on the AP Group. The Policies will + get applied in the order of the priority index." + ::= { cLAPGroupsPolicyEntry 2 } + +cLAPGroupsPolicyIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object uniquely specifies a Policy + Added to an AP group." + ::= { cLAPGroupsPolicyEntry 3 } + +cLAPGroupsPolicyWlanProfile OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the profile name assigned + to this WLAN. This value is assigned during wlan + creation using cLWlanProfileName." + ::= { cLAPGroupsPolicyEntry 4 } + +cLAPGroupsPolicyRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Row Status for + creation/deletion of a particular + venue entry in the table." + ::= { cLAPGroupsPolicyEntry 5 } + + + +cLAPGroupQinqConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLAPGroupQinqConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for the configuring QinQ for an AP group, + QinQ is used to append an external VLAN tag for client based on AP Group" + ::= { ciscoLwappAPGroupsVlanConfig 5 } + +cLAPGroupQinqConfigEntry OBJECT-TYPE + SYNTAX CLAPGroupQinqConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLAPGroupQinqConfigTable for the configuring QinQ for an AP group, + QinQ is used to append an external VLAN tag for client which + connected to the AP that belong to this AP Group" + INDEX { cLAPGroupName } + ::= { cLAPGroupQinqConfigTable 1 } + +CLAPGroupQinqConfigEntry ::= SEQUENCE { + cLAPGroupTrafficQinqEnabled TruthValue, + cLAPGroupDhcpQinqEnabled TruthValue, + cLAPGroupQinqServiceVlanId Integer32 +} + +cLAPGroupTrafficQinqEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the QinQ state for this AP group + QinQ is used to append an external VLAN tag for client which + connected to the AP that belong to this AP Group + - A value of 'true' indicates QinQ is enabled. + - A value of 'false' indicates the QinQ is disabled." + ::= { cLAPGroupQinqConfigEntry 1 } + +cLAPGroupDhcpQinqEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the QinQ state for this AP group + QinQ is used to append an external VLAN tag for client which + connected to the AP that belong to this AP Group + - A value of 'true' indicates that dhcp QinQ is enabled. + - A value of 'false indicates that dhcp QinQ is disabled." + ::= { cLAPGroupQinqConfigEntry 2 } + +cLAPGroupQinqServiceVlanId OBJECT-TYPE + SYNTAX Integer32 (1..4095) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the QinQ service vlan ID for this AP group" + ::= { cLAPGroupQinqConfigEntry 3 } + + +-- ******************************************************************** +-- WLAN Client Configuration +-- ******************************************************************** + +cLWlanConfigClientTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanConfigClientEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the WLAN configuration for + the 802.11 wireless clients that are associated + with the APs that have joined this controller. + + The creation of a new row in cLWlanConfigTable, + through an explicit network management action, + results in creation of an entry in this table. + Similarly, deletion of a row in + cLWlanConfigTable through user action causes the + deletion of corresponding row in this table. + + This table has an one-to-one relationship with + cLWlanConfigTable. There exists an entry in this + table for each corresponding entry in the + cLWlanConfigTable." + ::= { ciscoLwappWlanConfig 2 } + +cLWlanConfigClientEntry OBJECT-TYPE + SYNTAX CLWlanConfigClientEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry represents a conceptual row in this + table and provides the information about the + clients associated on the WLAN, uniquely identified by + the cLWlanIndex." + INDEX { cLWlanIndex } + ::= { cLWlanConfigClientTable 1 } + +CLWlanConfigClientEntry ::= SEQUENCE { + cLWlanClientAclName DisplayString, + cLWlanP2PBlocking INTEGER, + cLWlanClientIPv6AclName DisplayString +} + +cLWlanClientAclName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the name of the ACL applied + to this WLAN. If it is required to remove the ACL + name for a WLAN, it should be set to 'none'. + ACL's are applied in the following priority order - + interfaces ACLs, WLAN ACLs, client ACLs." + ::= { cLWlanConfigClientEntry 1 } + +cLWlanP2PBlocking OBJECT-TYPE + SYNTAX INTEGER { + disable(1), + drop(2), + forwardUp(3), + allowPvtGrp(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents per WLAN peer-to-peer + blocking behavior on controller. Peer-to-peer + blocking means traffic between two clients on + same VLAN will not be bridged. + + disable : Peer-to-peer blocking is disabled + and traffic is bridged locally + within the controller. + drop : The packet will be discarded. + forwardUp : The packet will be forwarded on the + upstream VLAN. The device 'north' of + the controller can then make the + decision about what to do with the + packet. + allowPvtGrp : The packet will be bridged if both + source and destination have same 'ipsk-tag', + if mac-filtering is disabled the packet + will be discarded." + ::= { cLWlanConfigClientEntry 2 } + +cLWlanClientIPv6AclName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the name of the IPv6 ACL applied + to this WLAN. If it is required to remove the ACL + name for a WLAN, it should be set to 'none'. + ACL's are applied in the following priority order - + interfaces ACLs, WLAN ACLs, client ACLs." + ::= { cLWlanConfigClientEntry 3 } + + +-- ******************************************************************** +-- WLAN QoS Configuration +-- ******************************************************************** + +cLWlanConfigQosTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanConfigQosEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the QoS configuration for + the WLAN. + + The creation of a new row in cLWlanConfigTable, + through an explicit network management action, + results in creation of an entry in this table. + Similarly, deletion of a row in + cLWlanConfigTable through user action causes the + deletion of corresponding row in this table. + + This table has an one-to-one relationship with + cLWlanConfigTable. There exists an entry in this + table for each corresponding entry in the + cLWlanConfigTable." + ::= { ciscoLwappWlanConfig 3 } + +cLWlanConfigQosEntry OBJECT-TYPE + SYNTAX CLWlanConfigQosEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry represents a conceptual row in this + table and provides the information about the + QoS parameters on the WLAN, uniquely identified by + the cLWlanIndex." + INDEX { cLWlanIndex } + ::= { cLWlanConfigQosTable 1 } + +CLWlanConfigQosEntry ::= SEQUENCE { + cLWlanClientDSAverageDataRate Unsigned32, + cLWlanClientUSAverageDataRate Unsigned32, + cLWlanClientDSBurstDataRate Unsigned32, + cLWlanClientUSBurstDataRate Unsigned32, + cLWlanClientDSAvgRealTimeDataRate Unsigned32, + cLWlanClientUSAvgRealTimeDataRate Unsigned32, + cLWlanClientDSBurstRealTimeDataRate Unsigned32, + cLWlanClientUSBurstRealTimeDataRate Unsigned32, + cLWlanSsidDSAverageDataRate Unsigned32, + cLWlanSsidUSAverageDataRate Unsigned32, + cLWlanSsidDSBurstDataRate Unsigned32, + cLWlanSsidUSBurstDataRate Unsigned32, + cLWlanSsidDSAvgRealTimeDataRate Unsigned32, + cLWlanSsidUSAvgRealTimeDataRate Unsigned32, + cLWlanSsidDSBurstRealTimeDataRate Unsigned32, + cLWlanSsidUSBurstRealTimeDataRate Unsigned32, + cLWlanWlanDSAverageDataRate Unsigned32, + cLWlanWlanUSAverageDataRate Unsigned32, + cLWlanWlanDSBurstDataRate Unsigned32, + cLWlanWlanUSBurstDataRate Unsigned32, + cLWlanWlanDSAvgRealTimeDataRate Unsigned32, + cLWlanWlanUSAvgRealTimeDataRate Unsigned32, + cLWlanWlanDSBurstRealTimeDataRate Unsigned32, + cLWlanWlanUSBurstRealTimeDataRate Unsigned32 +} + +cLWlanClientDSAverageDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies Average Data Rate per user on downstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 1 } + +cLWlanClientUSAverageDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies Average Data Rate per user on upstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 2 } + +cLWlanClientDSBurstDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies Burst Data Rate per user on downstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 3 } + +cLWlanClientUSBurstDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies Burst Data Rate per user on upstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 4 } + +cLWlanClientDSAvgRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies average real time + Data Rate per user on downstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 5 } + +cLWlanClientUSAvgRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies average real time + Data Rate per user on upstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 6 } + +cLWlanClientDSBurstRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies burst real time + Data Rate per user on downstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 7 } + +cLWlanClientUSBurstRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies burst real time + Data Rate per user on upstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 8 } + +cLWlanSsidDSAverageDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies Average + Data Rate per user on downstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 9 } + +cLWlanSsidUSAverageDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies Average + Data Rate per user on upstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 10 } + +cLWlanSsidDSBurstDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies Burst + Data Rate per user on downstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 11 } + +cLWlanSsidUSBurstDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies Burst + Data Rate per user on upstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 12 } + +cLWlanSsidDSAvgRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies average real time + Data Rate per user on downstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 13 } + +cLWlanSsidUSAvgRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies average real time + Data Rate per user on upstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 14 } + +cLWlanSsidDSBurstRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies burst real time + Data Rate per user on downstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 15 } + +cLWlanSsidUSBurstRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies burst real time + Data Rate per user on upstream. + Value of 0 indicates the feature is disabled." + ::= { cLWlanConfigQosEntry 16 } + +cLWlanWlanDSAverageDataRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbytes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies average data rate per + wlan on downstream. Value of 0 indicates that + feature is disabled." + ::= { cLWlanConfigQosEntry 17 } + +cLWlanWlanUSAverageDataRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbytes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies average data rate per + wlan on upstream. Value of 0 indicates that + feature is disabled." + ::= { cLWlanConfigQosEntry 18 } + +cLWlanWlanDSBurstDataRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbytes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies burst data rate per + wlan on downstream. Value of 0 indicates + that feature is disabled." + ::= { cLWlanConfigQosEntry 19 } + +cLWlanWlanUSBurstDataRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbytes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies burst data rate per + wlan on upstream. Value of 0 indicates that + feature is disabled." + ::= { cLWlanConfigQosEntry 20 } + +cLWlanWlanDSAvgRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbytes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies average real time data rate + per wlan on downstream. Value of 0 indicates that + feature is disabled." + ::= { cLWlanConfigQosEntry 21 } + +cLWlanWlanUSAvgRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbytes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies average real time data rate + per wlan on upstream. Value of 0 indicates that + feature is disabled." + ::= { cLWlanConfigQosEntry 22 } + +cLWlanWlanDSBurstRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbytes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies burst real time data rate + per wlan on downstream. Value of 0 indicates that + feature is disabled." + ::= { cLWlanConfigQosEntry 23 } + +cLWlanWlanUSBurstRealTimeDataRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "kbytes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies burst real time data rate + per wlan on upstream. Value of 0 indicates that + feature is disabled." + ::= { cLWlanConfigQosEntry 24 } + + +-- ******************************************************************** +-- WLAN IOS Configuration +-- ******************************************************************** + +cLWlanConfigIosTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanConfigIosEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the WLAN configuration for + IOS profiles configured on the switch. + + The creation of a new row in cLWlanConfigTable, + through an explicit network management action, + results in creation of an entry in this table. + Similarly, deletion of a row in + cLWlanConfigTable through user action causes the + deletion of corresponding row in this table. + + This table has an one-to-one relationship with + cLWlanConfigTable. There exists an entry in this + table for each corresponding entry in the + cLWlanConfigTable." + ::= { ciscoLwappWlanConfig 4 } + +cLWlanConfigIosEntry OBJECT-TYPE + SYNTAX CLWlanConfigIosEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry represents a conceptual row in this + table and provides the information about the + clients associated on the WLAN, uniquely identified by + the cLWlanIndex." + INDEX { cLWlanIndex } + ::= { cLWlanConfigIosTable 1 } + +CLWlanConfigIosEntry ::= SEQUENCE { + cLWlanIosAccountingMethodListName SnmpAdminString, + cLWlanIosAuthenticationMethodListName SnmpAdminString, + cLWlanIosMacFilteringMethodListName SnmpAdminString, + cLWlanIosWebAuthMethodListName SnmpAdminString, + cLWlanIosQosUpStreamProfileName SnmpAdminString, + cLWlanIosQosDownStreamProfileName SnmpAdminString, + cLWlanIngressDHCPOption82Format Unsigned32, + cLWlanIngressDHCPOption82Ascii TruthValue, + cLWlanIngressDHCPOption82Rid TruthValue, + cLWlanIngressDHCPOption82Enable TruthValue, + cLWlanIosScanDeferPriority Unsigned32, + cLWlanIosWebAuthParameterMapName SnmpAdminString, + cLWlanIosQosClientUpStreamProfileName SnmpAdminString, + cLWlanIosQosClientDownStreamProfileName SnmpAdminString +} + +cLWlanIosAccountingMethodListName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the method list name used for + accounting on this WLAN." + ::= { cLWlanConfigIosEntry 1 } + +cLWlanIosAuthenticationMethodListName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the method list name used for + 802.1x authentication on this WLAN. This could be + LDAP, RADIUS, LOCAL AUTH." + ::= { cLWlanConfigIosEntry 2 } + +cLWlanIosMacFilteringMethodListName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the method list name used for + mac filtering on this WLAN." + ::= { cLWlanConfigIosEntry 3 } + +cLWlanIosWebAuthMethodListName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the method list name used for + WEB AUTH on this WLAN." + ::= { cLWlanConfigIosEntry 4 } + +cLWlanIosQosUpStreamProfileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the profile name used for + upstream QOS configuration on this WLAN." + ::= { cLWlanConfigIosEntry 5 } + +cLWlanIosQosDownStreamProfileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the profile name used for + downstream QOS configuration on this WLAN." + ::= { cLWlanConfigIosEntry 6 } + +cLWlanIngressDHCPOption82Format OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the DHCP + Option82 format for this WLAN." + ::= { cLWlanConfigIosEntry 7 } + +cLWlanIngressDHCPOption82Ascii OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the DHCP Option82 Ascii option + for this WLAN." + ::= { cLWlanConfigIosEntry 8 } + +cLWlanIngressDHCPOption82Rid OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the DHCP Option82 Rid option + for this WLAN." + ::= { cLWlanConfigIosEntry 9 } + +cLWlanIngressDHCPOption82Enable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the DHCP Option82 state + for this WLAN." + ::= { cLWlanConfigIosEntry 10 } + +cLWlanIosScanDeferPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the priority of packets + that defer the off-channel scan. This is used in + off-channel scanning to improve performance + for medical devices using Radio Resource Management. + Each bit represents a packet type for which off-channel + scanning needs to be deferred." + ::= { cLWlanConfigIosEntry 11 } + +cLWlanIosWebAuthParameterMapName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the web auth parameter name + on this WLAN." + ::= { cLWlanConfigIosEntry 12 } + +cLWlanIosQosClientUpStreamProfileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the profile name used for + upstream QOS client configuration on this WLAN." + ::= { cLWlanConfigIosEntry 13 } + +cLWlanIosQosClientDownStreamProfileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the profile name used for + downstream QOS client configuration on this WLAN." + ::= { cLWlanConfigIosEntry 14 } + + +-- ******************************************************************** +-- * WLAN Flexible Netflow Table +-- ******************************************************************** + +cLWlanFlexibleNetflowTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLWlanFlexibleNetflowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the flexible netflow policy details + per WLAN for AVC. + The creation of a new row in cLWlanFlexibleConfigTable, + through an explicit network management action, + results in creation of an entry in this table. + Similarly, deletion of a row in + cLWlanConfigTable through user action causes the + deletion of corresponding rows in this table. + For each wlan, there will be zero to many instances of + flexible netflow policies." + ::= { ciscoLwappWlanConfig 5 } + +cLWlanFlexibleNetflowEntry OBJECT-TYPE + SYNTAX CLWlanFlexibleNetflowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry represents a conceptual row in this + table and provides the information about the flexible + netflow policy types associated on the WLAN, uniquely + identified by the cLWlanIndex and + cLWlanFlexibleNetflowPolicyTypeIndex." + INDEX { + cLWlanIndex, + cLWlanFlexibleNetflowPolicyTypeIndex + } + ::= { cLWlanFlexibleNetflowTable 1 } + +CLWlanFlexibleNetflowEntry ::= SEQUENCE { + cLWlanFlexibleNetflowPolicyTypeIndex INTEGER, + cLWlanFlexibleNetflowMonitorName SnmpAdminString, + cLWlanFlexibleNetflowRowStatus RowStatus +} + +cLWlanFlexibleNetflowPolicyTypeIndex OBJECT-TYPE + SYNTAX INTEGER { + none(0), + ipv4InputPolicy(1), + ipv4OutputPolicy(2), + ipv6InputPolicy(3), + ipv6OutputPolicy(4), + datalinkInputPolicy(5), + datalinkOutputPolicy(6) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object is used to set the netflow traffic direction + for AVC. + none(0) capture no traffic + IPV4 Input Policy(1) - IPV4 input policy + IPV4OutputPolicy(2) - IPV4 output policy + IPV6InputPolicy(3) - IPV6 input policy + IPV6OutputPolicy(4) - IPV6 output policy + DatalinkInputPolicy(5) - Datalink input policy + DatalinkOutputPolicy(6) - Datalink output policy." + ::= { cLWlanFlexibleNetflowEntry 1 } + +cLWlanFlexibleNetflowMonitorName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object represents the flexible netflow + monitor name assigned to this WLAN." + ::= { cLWlanFlexibleNetflowEntry 2 } + +cLWlanFlexibleNetflowRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Row Status for creation/deletion of a particular + flexible netflow policy + entry from the table" + ::= { cLWlanFlexibleNetflowEntry 3 } + + + +cLPolicyConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLPolicyConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for the native Profiling Policies + on the Wireless LAN controller. + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLPolicyRowStatus object." + ::= { ciscoLwappPolicyConfig 1 } + +cLPolicyConfigEntry OBJECT-TYPE + SYNTAX CLPolicyConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLPolicyConfigTable." + INDEX { cLPolicyIndex } + ::= { cLPolicyConfigTable 1 } + +CLPolicyConfigEntry ::= SEQUENCE { + cLPolicyIndex Unsigned32, + cLPolicyName SnmpAdminString, + cLPolicyRoleName SnmpAdminString, + cLPolicyEapType INTEGER, + cLPolicyAclName SnmpAdminString, + cLPolicyVlanId Unsigned32, + cLPolicyQosProfile INTEGER, + cLPolicySessionTimeout Unsigned32, + cLPolicySleepTimeout Unsigned32, + cLPolicyRowStatus RowStatus, + cLPolicyFlexAclName SnmpAdminString, + cLPolicyAvcProfileName SnmpAdminString, + cLPolicyMdnsProfileName SnmpAdminString, + cLPolicyFlexVlanId Unsigned32, + cLPolicyUrlAclName SnmpAdminString, + cLPolicyOpendnsProfileName SnmpAdminString +} + +cLPolicyIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the Index of the + native profiling classification policy + configured on the Wireless LAN Controller." + ::= { cLPolicyConfigEntry 1 } + +cLPolicyName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies a + native profiling classification policy + configured on the Wireless LAN Controller." + ::= { cLPolicyConfigEntry 2 } + +cLPolicyRoleName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the category of users + to which a Policy is to be applied." + ::= { cLPolicyConfigEntry 3 } + +cLPolicyEapType OBJECT-TYPE + SYNTAX INTEGER { + none(1), + leap(2), + eapFast(3), + eapTls(4), + peap(5) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the EAP type to be + applied on client." + ::= { cLPolicyConfigEntry 4 } + +cLPolicyAclName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the ACL to be + applied on client." + ::= { cLPolicyConfigEntry 5 } + +cLPolicyVlanId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the VLAN to be + applied on client." + ::= { cLPolicyConfigEntry 6 } + +cLPolicyQosProfile OBJECT-TYPE + SYNTAX INTEGER { + none(1), + silver(2), + gold(3), + platinum(4), + bronze(5) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the QoS to be + applied on client." + ::= { cLPolicyConfigEntry 7 } + +cLPolicySessionTimeout OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the session timeout + to be applied on client." + ::= { cLPolicyConfigEntry 8 } + +cLPolicySleepTimeout OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the sleep timeout + to be applied on client." + ::= { cLPolicyConfigEntry 9 } + +cLPolicyRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Row Status for + creation/deletion of a particular + policy entry in the table." + ::= { cLPolicyConfigEntry 10 } + +cLPolicyFlexAclName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the FlexConnect ACL + to be applied on client using a Policy. + This will be effective only on locally + switched WLANs." + ::= { cLPolicyConfigEntry 11 } + +cLPolicyAvcProfileName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the avc profilename to be + applied on client." + ::= { cLPolicyConfigEntry 12 } + +cLPolicyMdnsProfileName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the MDNS profile name to be + applied on client." + ::= { cLPolicyConfigEntry 13 } + +cLPolicyFlexVlanId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the flex VLAN to be + applied on client ." + ::= { cLPolicyConfigEntry 14 } + +cLPolicyUrlAclName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the URL ACL to be + applied on client ." + ::= { cLPolicyConfigEntry 15 } + +cLPolicyOpendnsProfileName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the opendns profile name to be + applied on client ." + ::= { cLPolicyConfigEntry 16 } + + + +cLPolicyDeviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLPolicyDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for the device types to be + added in each native Profiling Policy + on the controller. + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLPolicyDeviceRowStatus object." + ::= { ciscoLwappPolicyConfig 2 } + +cLPolicyDeviceEntry OBJECT-TYPE + SYNTAX CLPolicyDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLPolicyConfigTable." + INDEX { + cLPolicyIndex, + cLPolicyDeviceIndex + } + ::= { cLPolicyDeviceTable 1 } + +CLPolicyDeviceEntry ::= SEQUENCE { + cLPolicyDeviceIndex Unsigned32, + cLPolicyDeviceName SnmpAdminString, + cLPolicyDeviceRowStatus RowStatus +} + +cLPolicyDeviceIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the index of the device + type configured on the policy." + ::= { cLPolicyDeviceEntry 1 } + +cLPolicyDeviceName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies name of the device + configured on the policy." + ::= { cLPolicyDeviceEntry 2 } + +cLPolicyDeviceRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Row Status for + creation/deletion of a particular + device entry in the table." + ::= { cLPolicyDeviceEntry 3 } + + + +cLPolicyActiveHoursTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLPolicyActiveHoursEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table for the active hours to be + added in each native Profiling Policy + on the controller. + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLPolicyActiveHoursRowStatus object." + ::= { ciscoLwappPolicyConfig 3 } + +cLPolicyActiveHoursEntry OBJECT-TYPE + SYNTAX CLPolicyActiveHoursEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in cLPolicyActiveHoursTable." + INDEX { + cLPolicyIndex, + cLPolicyActiveDay + } + ::= { cLPolicyActiveHoursTable 1 } + +CLPolicyActiveHoursEntry ::= SEQUENCE { + cLPolicyActiveDay INTEGER, + cLPolicyActiveStartTime TimeTicks, + cLPolicyActiveEndTime TimeTicks, + cLPolicyActiveHoursRowStatus RowStatus +} + +cLPolicyActiveDay OBJECT-TYPE + SYNTAX INTEGER { + mon(1), + tue(2), + wed(3), + thu(4), + fri(5), + sat(6), + sun(7) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the Index of the day + for which active hours is configured on the policy." + ::= { cLPolicyActiveHoursEntry 1 } + +cLPolicyActiveStartTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies a start of active hours + for a day added to a Policy." + ::= { cLPolicyActiveHoursEntry 2 } + +cLPolicyActiveEndTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies a end of active hours + for a day added to a Policy." + ::= { cLPolicyActiveHoursEntry 3 } + +cLPolicyActiveHoursRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies the Row Status for + creation/deletion of a particular + entry in the table." + ::= { cLPolicyActiveHoursEntry 4 } + + +-- *********************************************** +-- Wlan Scheduling Table +-- *********************************************** + +cLPolicyWlanSchedulingTable OBJECT-TYPE + SYNTAX SEQUENCE OF CLPolicyWlanSchedulingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the WLAN scheduling on + the controller. + Rows are added or deleted by explicit + management actions initiated by the user from a + network management station through the + cLPolicyWlanSchedulingRowStatus object." + ::= { ciscoLwappPolicyConfig 4 } + +cLPolicyWlanSchedulingEntry OBJECT-TYPE + SYNTAX CLPolicyWlanSchedulingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table represents the + configuration attributes of + cLPolicyWlanSchedulingTable." + INDEX { + cLPolicyIndex, + cLPolicyWlanSchedulingDay + } + ::= { cLPolicyWlanSchedulingTable 1 } + +CLPolicyWlanSchedulingEntry ::= SEQUENCE { + cLPolicyWlanSchedulingDay INTEGER, + cLPolicyWlanSchedulingStatus TruthValue, + cLPolicyWlanSchedulingStartTime TimeTicks, + cLPolicyWlanSchedulingEndTime TimeTicks, + cLPolicyWlanSchedulingRowStatus RowStatus +} + +cLPolicyWlanSchedulingDay OBJECT-TYPE + SYNTAX INTEGER { + mon(1), + tue(2), + wed(3), + thu(4), + fri(5), + sat(6), + sun(7) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object specifies the day for which WLAN + scheduling is configured on the policy." + ::= { cLPolicyWlanSchedulingEntry 1 } + +cLPolicyWlanSchedulingStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies scheduling status per WLAN. + A value of 'true' indicates that scheduling status is + enabled on a WLAN. + A value of 'false' indicates that scheduling status is + disabled on a WLAN." + ::= { cLPolicyWlanSchedulingEntry 2 } + +cLPolicyWlanSchedulingStartTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies a start of WLAN scheduling + hours for a day added to a Policy." + ::= { cLPolicyWlanSchedulingEntry 3 } + +cLPolicyWlanSchedulingEndTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies a end of WLAN scheduling hours + for a day added to a Policy." + ::= { cLPolicyWlanSchedulingEntry 4 } + +cLPolicyWlanSchedulingRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is the status column for this row and is + used to create and delete specific instances + of rows in this table." + ::= { cLPolicyWlanSchedulingEntry 5 } + + +-- ******************************************************************** +-- * Compliance statements +-- ******************************************************************** + +ciscoLwappWlanMIBCompliances OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBConform 1 } + +ciscoLwappWlanMIBGroups OBJECT IDENTIFIER + ::= { ciscoLwappWlanMIBConform 2 } + + +ciscoLwappWlanMIBCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { ciscoLwappWlanConfigGroup } + + OBJECT cLWlanRowStatus + SYNTAX INTEGER { + active(1), + createAndGo(4), + destroy(6) + } + DESCRIPTION + "An implementation is only required to support + three of the six enumerated values of the + RowStatus textual convention, specifically, + 'active', 'createAndGo' and 'destroy'." + ::= { ciscoLwappWlanMIBCompliances 1 } + +ciscoLwappWlanMIBComplianceRev1 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup + } + + OBJECT cLWlanRowStatus + SYNTAX INTEGER { + active(1), + createAndGo(4), + destroy(6) + } + DESCRIPTION + "An implementation is only required to support + three of the six enumerated values of the + RowStatus textual convention, specifically, + 'active', 'createAndGo' and 'destroy'." + ::= { ciscoLwappWlanMIBCompliances 2 } + +ciscoLwappWlanMIBComplianceRev2 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappWlan11uConfigGroup, + ciscoLwappAPGroupsVlanConfigGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1 + } + + OBJECT cLAPGroupsVlanConfigRowStatus + SYNTAX RowStatus + DESCRIPTION + "An implementation is only required to support + three of the six enumerated values of the + RowStatus textual convention, specifically, + 'active', 'createAndGo' and 'destroy'." + + OBJECT cLWlan11uOuiRowStatus + SYNTAX RowStatus + DESCRIPTION + "An implementation is only required to support + three of the six enumerated values of the + RowStatus textual convention, specifically, + 'active', 'createAndGo' and 'destroy'." + ::= { ciscoLwappWlanMIBCompliances 3 } + +ciscoLwappWlanMIBComplianceRev3 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappWlan11uConfigGroup, + ciscoLwappAPGroupsVlanConfigGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1, + ciscoLwappWlanConfigGroupSup3 + } + ::= { ciscoLwappWlanMIBCompliances 4 } + +ciscoLwappWlanMIBComplianceRev4 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappAPGroupsVlanConfigGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1, + ciscoLwappWlanConfigGroupSup3, + ciscoLwappWlan11uConfigGroupsup1, + ciscoLwappWlanServiceAdvertisementConfigGroup, + ciscoLwappWlanHotSpot2ConfigGroup, + ciscoLwappWlanIosConfigGroup, + ciscoLwappWlanQosConfigGroup, + ciscoLwappWlan11uConfigGroupsup2, + ciscoLwappWlanConfigGroupSup4, + ciscoLwappWlanHotSpot2ConfigGroupSup1, + ciscoLwappAPGroupsVlanConfigGroupSup1, + cLAPGroupsVenueConfigGroup, + cLAPGroupsMultipleVenueGroup, + ciscoLwappWlanConfigClientGroupSup2 + } + ::= { ciscoLwappWlanMIBCompliances 5 } + +ciscoLwappWlanMIBComplianceRev5 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappAPGroupsVlanConfigGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1, + ciscoLwappWlanConfigGroupSup3, + ciscoLwappWlan11uConfigGroupsup1, + ciscoLwappWlanServiceAdvertisementConfigGroup, + ciscoLwappWlanHotSpot2ConfigGroup, + ciscoLwappWlanIosConfigGroup, + ciscoLwappWlanQosConfigGroup, + ciscoLwappWlan11uConfigGroupsup2, + ciscoLwappWlanConfigGroupSup4, + ciscoLwappWlanHotSpot2ConfigGroupSup1, + ciscoLwappAPGroupsVlanConfigGroupSup1, + cLAPGroupsVenueConfigGroup, + cLAPGroupsMultipleVenueGroup, + ciscoLwappWlanConfigClientGroupSup2, + ciscoLwappWlanConfigFlexibleNetflowGroup + } + ::= { ciscoLwappWlanMIBCompliances 6 } + +ciscoLwappWlanMIBComplianceRev6 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1, + ciscoLwappWlanConfigGroupSup3, + ciscoLwappWlan11uConfigGroupsup1, + ciscoLwappWlanServiceAdvertisementConfigGroup, + ciscoLwappWlanHotSpot2ConfigGroup, + ciscoLwappWlanIosConfigGroup, + ciscoLwappWlanQosConfigGroup, + ciscoLwappWlan11uConfigGroupsup2, + ciscoLwappWlanConfigGroupSup4, + ciscoLwappWlanHotSpot2ConfigGroupSup1, + ciscoLwappAPGroupsVlanConfigGroupSup1, + cLAPGroupsVenueConfigGroup, + cLAPGroupsMultipleVenueGroup, + ciscoLwappWlanConfigClientGroupSup2, + ciscoLwappWlanConfigFlexibleNetflowGroup, + ciscoLwappAPGroupsVlanConfigGroupSup2 + } + ::= { ciscoLwappWlanMIBCompliances 7 } + +ciscoLwappWlanMIBComplianceRev7 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1, + ciscoLwappWlanConfigGroupSup3, + ciscoLwappWlan11uConfigGroupsup1, + ciscoLwappWlanServiceAdvertisementConfigGroup, + ciscoLwappWlanHotSpot2ConfigGroup, + ciscoLwappWlanIosConfigGroup, + ciscoLwappWlanQosConfigGroup, + ciscoLwappWlan11uConfigGroupsup2, + ciscoLwappWlanConfigGroupSup4, + ciscoLwappWlanHotSpot2ConfigGroupSup1, + ciscoLwappAPGroupsVlanConfigGroupSup1, + cLAPGroupsVenueConfigGroup, + cLAPGroupsMultipleVenueGroup, + ciscoLwappWlanConfigClientGroupSup2, + ciscoLwappWlanConfigFlexibleNetflowGroup, + ciscoLwappAPGroupsVlanConfigGroupSup2, + ciscoLwappWlanConfigGroupSup6 + } + ::= { ciscoLwappWlanMIBCompliances 8 } + +ciscoLwappWlanMIBComplianceRev8 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1, + ciscoLwappWlanConfigGroupSup3, + ciscoLwappWlan11uConfigGroupsup1, + ciscoLwappWlanServiceAdvertisementConfigGroup, + ciscoLwappWlanHotSpot2ConfigGroup, + ciscoLwappWlanIosConfigGroup, + ciscoLwappWlanQosConfigGroup, + ciscoLwappWlan11uConfigGroupsup2, + ciscoLwappWlanConfigGroupSup4, + ciscoLwappWlanHotSpot2ConfigGroupSup1, + ciscoLwappAPGroupsVlanConfigGroupSup1, + cLAPGroupsVenueConfigGroup, + cLAPGroupsMultipleVenueGroup, + ciscoLwappWlanConfigClientGroupSup2, + ciscoLwappWlanConfigFlexibleNetflowGroup, + ciscoLwappAPGroupsVlanConfigGroupSup2, + ciscoLwappWlanConfigGroupSup6, + ciscoLwappWlanConfigGroupSup7, + ciscoLwappWlanConfigGroupSup8 + } + ::= { ciscoLwappWlanMIBCompliances 9 } + +ciscoLwappWlanMIBComplianceRev9 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1, + ciscoLwappWlanConfigGroupSup3, + ciscoLwappWlan11uConfigGroupsup1, + ciscoLwappWlanServiceAdvertisementConfigGroup, + ciscoLwappWlanHotSpot2ConfigGroup, + ciscoLwappWlanIosConfigGroup, + ciscoLwappWlanQosConfigGroup, + ciscoLwappWlan11uConfigGroupsup2, + ciscoLwappWlanHotSpot2ConfigGroupSup1, + ciscoLwappAPGroupsVlanConfigGroupSup1, + cLAPGroupsVenueConfigGroup, + cLAPGroupsMultipleVenueGroup, + ciscoLwappWlanConfigClientGroupSup2, + ciscoLwappWlanConfigFlexibleNetflowGroup, + ciscoLwappWlanConfigGroupSup5, + ciscoLwappAPGroupsVlanConfigGroupSup2, + ciscoLwappWlanConfigGroupSup6, + ciscoLwappWlanConfigGroupSup7, + ciscoLwappWlanConfigGroupSup8, + ciscoLwappWlan11vConfigGroup + } + ::= { ciscoLwappWlanMIBCompliances 10 } + +ciscoLwappWlanMIBComplianceRev10 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the SNMP entities that + implement the ciscoLwappWlanMIB module." + MODULE -- this module + MANDATORY-GROUPS { + ciscoLwappWlanConfigGroupSup1, + ciscoLwappWlanConfigClientGroup, + ciscoLwappWlanConfigGroupSup2, + ciscoLwappWlanConfigClientGroupSup1, + ciscoLwappWlanConfigGroupSup3, + ciscoLwappWlan11uConfigGroupsup1, + ciscoLwappWlanServiceAdvertisementConfigGroup, + ciscoLwappWlanHotSpot2ConfigGroup, + ciscoLwappWlanIosConfigGroup, + ciscoLwappWlanQosConfigGroup, + ciscoLwappWlan11uConfigGroupsup2, + ciscoLwappWlanHotSpot2ConfigGroupSup1, + ciscoLwappAPGroupsVlanConfigGroupSup1, + cLAPGroupsVenueConfigGroup, + cLAPGroupsMultipleVenueGroup, + ciscoLwappWlanConfigClientGroupSup2, + ciscoLwappWlanConfigFlexibleNetflowGroup, + ciscoLwappWlanConfigGroupSup5, + ciscoLwappAPGroupsVlanConfigGroupSup2, + ciscoLwappWlanConfigGroupSup6, + ciscoLwappWlanConfigGroupSup7, + ciscoLwappWlanConfigGroupSup8, + ciscoLwappWlan11vConfigGroup, + ciscoLwappApGroupConfigGroup, + ciscoLwappPolicyConfigGroup + } + ::= { ciscoLwappWlanMIBCompliances 11 } + +-- ******************************************************************** +-- * Units of conformance +-- ******************************************************************** + +ciscoLwappWlanConfigGroup OBJECT-GROUP + OBJECTS { cLWlanRowStatus } + STATUS deprecated + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an LWAPP AP. + ciscoLwappWlanConfigGroup object is superseded by + ciscoLwappWlanConfigGroupSup1." + ::= { ciscoLwappWlanMIBGroups 1 } + +ciscoLwappWlanConfigGroupSup1 OBJECT-GROUP + OBJECTS { + cLWlanRowStatus, + cLWlanProfileName, + cLWlanSsid, + cLWlanDiagChan, + cLWlanStorageType + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an LWAPP AP." + ::= { ciscoLwappWlanMIBGroups 2 } + +ciscoLwappWlanConfigClientGroup OBJECT-GROUP + OBJECTS { cLWlanClientAclName } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an 8021.11 clients." + ::= { ciscoLwappWlanMIBGroups 3 } + +ciscoLwappWlan11uConfigGroup OBJECT-GROUP + OBJECTS { + cLWlan11uStatus, + cLWlan11uInternetAccess, + cLWlan11uNetworkType, + cLWlan11uVenueGroup, + cLWlan11uVenueType, + cLWlan11uVenueName, + cLWlan11uOui, + cLWlan11uOuiIsBeacon, + cLWlan11uOuiRowStatus, + cLWlan11uOuiStorageType + } + STATUS deprecated + DESCRIPTION + "This collection of objects represents 802.11u + related configuration of WLANs on the controller + to be passed to an AP. + ciscoLwappWlan11uConfigGroup object is superseded + by ciscoLwappWlan11uConfigGroupsup1." + ::= { ciscoLwappWlanMIBGroups 4 } + +ciscoLwappAPGroupsVlanConfigGroup OBJECT-GROUP + OBJECTS { + cLAPGroupsVlanMappingInterfaceName, + cLAPGroupNACSupport, + cLAPGroupsVlanConfigRowStatus, + cLAPGroupsVlanConfigStorageType + } + STATUS deprecated + DESCRIPTION + "This collection of objects represent the + configuration of AP Groups Vlan on the controller + to be passed to an AP. + ciscoLwappAPGroupsVlanConfigGroup object is superseded by + ciscoLwappAPGroupsVlanConfigGroupSup2." + ::= { ciscoLwappWlanMIBGroups 5 } + +ciscoLwappWlanConfigGroupSup2 OBJECT-GROUP + OBJECTS { + cLWlanLoadBalancingEnable, + cLWlanBandSelectEnable, + cLWlanPassiveClientEnable, + cLWlanIsWired, + cLWlanIngressInterface, + cLWlanNACSupport, + cLWlanWepKeyChange, + cLWlanChdEnable, + cLWlan802dot11anDTIM, + cLWlan802dot11bgnDTIM + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an LWAPP AP." + ::= { ciscoLwappWlanMIBGroups 6 } + +ciscoLwappWlanConfigClientGroupSup1 OBJECT-GROUP + OBJECTS { cLWlanP2PBlocking } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an 8021.11 clients." + ::= { ciscoLwappWlanMIBGroups 7 } + +ciscoLwappWlanConfigGroupSup3 OBJECT-GROUP + OBJECTS { + cLWlanReAnchorRoamedVoiceClientsEnable, + cLWlanMulticastInterfaceEnable, + cLWlanMulticastInterface, + cLWlanMulticastDirectEnable, + cLWlanNACPostureSupport, + cLWlanMaxClientsAccepted, + cLWlanScanDeferPriority, + cLWlanScanDeferTime, + cLWlanLanSubType, + cLWlanWebAuthOnMacFilterFailureEnabled, + cLWlanStaticIpTunnelingEnabled + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an LWAPP AP." + ::= { ciscoLwappWlanMIBGroups 8 } + +ciscoLwappWlan11uConfigGroupsup1 OBJECT-GROUP + OBJECTS { + cLWlan11uStatus, + cLWlan11uInternetAccess, + cLWlan11uNetworkType, + cLWlan11uHessid, + cLWlan11uNetworkAuthType, + cLWlan11uOui, + cLWlan11uOuiIsBeacon, + cLWlan11uOuiRowStatus, + cLWlan11uOuiStorageType, + cLWlan11uRealmName, + cLWlan11uRealmRowStatus, + cLWlan11uRealmEapMethod, + cLWlan11uRealmEapRowStatus, + cLWlan11uRealmEapAuthMethod, + cLWlan11uRealmEapAuthParam, + cLWlan11uRealmEapAuthRowStatus, + cLWlan11uDomainName, + cLWlan11uDomainRowStatus, + cLWlan11u3gppCountryCode, + cLWlan11u3gppNetworkCode, + cLWlan11u3gppRowStatus, + cLWlan11uIpAddressAvailIpv4, + cLWlan11uIpAddressAvailIpv6 + } + STATUS current + DESCRIPTION + "This collection of objects represents 802.11u + related configuration of WLANs on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 9 } + +ciscoLwappWlanServiceAdvertisementConfigGroup OBJECT-GROUP + OBJECTS { + cLWlanServiceAdvertisementStatus, + cLWlanServiceAdvertisementMsapServerIndex + } + STATUS current + DESCRIPTION + "This collection of objects represents 802.11u + related configuration of WLANs on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 10 } + +ciscoLwappWlanHotSpot2ConfigGroup OBJECT-GROUP + OBJECTS { + cLWlanHotSpot2OperatorName, + cLWlanHotSpot2OperatorLanguage, + cLWlanHotSpot2OperatorRowStatus, + cLWlanHotSpot2PortConfigIpProtocol, + cLWlanHotSpot2PortConfigPortNumber, + cLWlanHotSpot2PortConfigStatus, + cLWlanHotSpot2PortConfigRowStatus + } + STATUS current + DESCRIPTION + "This collection of objects represents 802.11u + related configuration of WLANs on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 11 } + +ciscoLwappWlanIosConfigGroup OBJECT-GROUP + OBJECTS { + cLWlanIosAccountingMethodListName, + cLWlanIosAuthenticationMethodListName, + cLWlanIosMacFilteringMethodListName, + cLWlanIosWebAuthMethodListName, + cLWlanIosQosUpStreamProfileName, + cLWlanIosQosDownStreamProfileName, + cLWlanIngressDHCPOption82Format, + cLWlanIngressDHCPOption82Ascii, + cLWlanIngressDHCPOption82Rid, + cLWlanIngressDHCPOption82Enable, + cLWlanIosScanDeferPriority, + cLWlanIosWebAuthParameterMapName, + cLWlanIosQosClientUpStreamProfileName, + cLWlanIosQosClientDownStreamProfileName + } + STATUS current + DESCRIPTION + "This collection of objects represents IOS + related configuration of WLANs on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 12 } + +ciscoLwappWlanQosConfigGroup OBJECT-GROUP + OBJECTS { + cLWlanClientDSAverageDataRate, + cLWlanClientUSAverageDataRate, + cLWlanClientDSBurstDataRate, + cLWlanClientUSBurstDataRate, + cLWlanClientDSAvgRealTimeDataRate, + cLWlanClientUSAvgRealTimeDataRate, + cLWlanClientDSBurstRealTimeDataRate, + cLWlanClientUSBurstRealTimeDataRate, + cLWlanSsidDSAverageDataRate, + cLWlanSsidUSAverageDataRate, + cLWlanSsidDSBurstDataRate, + cLWlanSsidUSBurstDataRate, + cLWlanSsidDSAvgRealTimeDataRate, + cLWlanSsidUSAvgRealTimeDataRate, + cLWlanSsidDSBurstRealTimeDataRate, + cLWlanSsidUSBurstRealTimeDataRate, + cLWlanWlanDSAverageDataRate, + cLWlanWlanUSAverageDataRate, + cLWlanWlanDSBurstDataRate, + cLWlanWlanUSBurstDataRate, + cLWlanWlanDSAvgRealTimeDataRate, + cLWlanWlanUSAvgRealTimeDataRate, + cLWlanWlanDSBurstRealTimeDataRate, + cLWlanWlanUSBurstRealTimeDataRate + } + STATUS current + DESCRIPTION + "This collection of objects represents QoS + related configuration of WLANs on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 13 } + +ciscoLwappWlanConfigGroupSup4 OBJECT-GROUP + OBJECTS { + cLWlanKtsCacSupportEnabled, + cLWlanWifiDirectPolicyStatus, + cLWlanWebAuthIPv6AclName, + cLWlanHotSpot2Enabled, + cLWlanMaxClientsAllowedPerRadio, + cLWlanDhcpDeviceProfiling, + cLWlanMacAuthOverDot1xEnabled, + cLWlanUserTimeout, + cLWlanUserIdleThreshold, + cLWlanHttpDeviceProfiling, + cLWlanHotSpotClearConfig, + cLWlanRadiusAuthFourthServer, + cLWlanRadiusAuthFifthServer, + cLWlanRadiusAuthSixthServer, + cLWlanRadiusAcctFourthServer, + cLWlanRadiusAcctFifthServer, + cLWlanRadiusAcctSixthServer, + cLWlanSelfAnchorEnabled + } + STATUS deprecated + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an LWAPP AP.This object is superceded by + ciscoLwappWlanConfigGroupSup5. + ciscoLwappWlanConfigGroupSup4 object is superseded by ciscoLwappWlanConfigGroupSup5." + ::= { ciscoLwappWlanMIBGroups 14 } + +ciscoLwappWlan11uConfigGroupsup2 OBJECT-GROUP + OBJECTS { cLWlan11uRealmEapAuthCredentialType } + STATUS current + DESCRIPTION + "This collection of objects represents 802.11u + related configuration of WLANs on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 15 } + +ciscoLwappWlanHotSpot2ConfigGroupSup1 OBJECT-GROUP + OBJECTS { + cLWlanHotSpot2WanLinkStatus, + cLWlanHotSpot2WanSymLinkStatus, + cLWlanHotSpot2WanDownLinkSpeed, + cLWlanHotSpot2WanUpLinkSpeed + } + STATUS current + DESCRIPTION + "This collection of objects represents 802.11u + related configuration of WLANs on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 16 } + +ciscoLwappAPGroupsVlanConfigGroupSup1 OBJECT-GROUP + OBJECTS { cLAPGroupsWlanOrderIndex } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of AP Groups Vlan on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 17 } + +cLAPGroupsVenueConfigGroup OBJECT-GROUP + OBJECTS { + cLAPGroupsVenueConfigVenueGroup, + cLAPGroupsVenueConfigVenueType, + cLAPGroupsVenueConfigVenueName, + cLAPGroupsVenueConfigLanguage, + cLAPGroupsOperatingClass + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of Venue groups on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 18 } + +cLAPGroupsMultipleVenueGroup OBJECT-GROUP + OBJECTS { + cLAPGroupsMultipleVenueName, + cLAPGroupsMultipleVenueRowStatus + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of Venue groups on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 19 } + +ciscoLwappWlanConfigClientGroupSup2 OBJECT-GROUP + OBJECTS { cLWlanClientIPv6AclName } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an 8021.11 clients." + ::= { ciscoLwappWlanMIBGroups 20 } + +ciscoLwappWlanConfigFlexibleNetflowGroup OBJECT-GROUP + OBJECTS { + cLWlanFlexibleNetflowMonitorName, + cLWlanFlexibleNetflowRowStatus + } + STATUS current + DESCRIPTION + "This collection of objects represent the configuration + of flexible netflow policy details per WLAN + on the conroller to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 21 } + +ciscoLwappWlanConfigGroupSup5 OBJECT-GROUP + OBJECTS { + cLWlanKtsCacSupportEnabled, + cLWlanWifiDirectPolicyStatus, + cLWlanWebAuthIPv6AclName, + cLWlanHotSpot2Enabled, + cLWlanMaxClientsAllowedPerRadio, + cLWlanDhcpDeviceProfiling, + cLWlanMacAuthOverDot1xEnabled, + cLWlanUserTimeout, + cLWlanUserIdleThreshold, + cLWlanHttpDeviceProfiling, + cLWlanHotSpotClearConfig, + cLWlanRadiusAuthFourthServer, + cLWlanRadiusAuthFifthServer, + cLWlanRadiusAuthSixthServer, + cLWlanRadiusAcctFourthServer, + cLWlanRadiusAcctFifthServer, + cLWlanRadiusAcctSixthServer, + cLWlanSelfAnchorEnabled, + cLWlanUniversalAdmin + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an LWAPP AP." + ::= { ciscoLwappWlanMIBGroups 22 } + +ciscoLwappAPGroupsVlanConfigGroupSup2 OBJECT-GROUP + OBJECTS { + cLAPGroupNACSupport, + cLAPGroupsVlanConfigRowStatus, + cLAPGroupsVlanConfigStorageType, + cLAPGroupsVlanMappingInterfaceNameRev1 + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of AP Groups Vlan on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 23 } + +ciscoLwappWlanConfigGroupSup6 OBJECT-GROUP + OBJECTS { cLWlan11acMuMimoEnabled } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of WLANs on the controller to be passed + to an LWAPP AP." + ::= { ciscoLwappWlanMIBGroups 24 } + +ciscoLwappWlanConfigGroupSup7 OBJECT-GROUP + OBJECTS { + cLAPGroupsHyperlocationEnable, + cLAPGroupsPakRssiThreshold, + cLAPGroupsPakRssiThresholdTrigger, + cLAPGroupsPakRssiNtpIpAddressType, + cLAPGroupsPakRssiNtpAddress + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of AP Groups HyperLocation on the + controller to be passed to an LWAPP AP." + ::= { ciscoLwappWlanMIBGroups 25 } + +ciscoLwappWlanConfigGroupSup8 OBJECT-GROUP + OBJECTS { + cLAPGroupsLANPortStatus, + cLAPGroupsLANPortPoeStatus, + cLAPGroupsLANPortRlanName, + cLAPGroupsLANPortRowStatus, + cLAPGroupsExtModuleStatus, + cLAPGroupsExtModuleRlanName + } + STATUS current + DESCRIPTION + "This collection of objects represent the + configuration of AP Groups LAN Port on the controller + to be passed to an LWAPP AP." + ::= { ciscoLwappWlanMIBGroups 26 } + +ciscoLwappWlan11vConfigGroup OBJECT-GROUP + OBJECTS { + cLWlan11vBssTransEnable, + cLWlan11vDisassocImmiEnable, + cLWlan11vDisassocTimer, + cLWlan11vOpRoamDisassocTimer + } + STATUS current + DESCRIPTION + "This collection of objects represents 802.11v BSS Transistion + related configuration of WLANs on the controller + to be passed to an AP." + ::= { ciscoLwappWlanMIBGroups 27 } + +ciscoLwappApGroupConfigGroup OBJECT-GROUP + OBJECTS { + cLAPGroupNasId, + cLApGroupPreferMode, + cLApGroupGlobalWebAuthConfig, + cLApGroupExternalWebAuthUrl, + cLAPGroupsPolicyIndex, + cLAPGroupsPolicyWlanProfile, + cLAPGroupsPolicyRowStatus, + cLAPGroupTrafficQinqEnabled, + cLAPGroupDhcpQinqEnabled, + cLAPGroupQinqServiceVlanId + } + STATUS current + DESCRIPTION + "This collection of objects represents AP group related + configuration of WLANs on the controller." + ::= { ciscoLwappWlanMIBGroups 28 } + +ciscoLwappPolicyConfigGroup OBJECT-GROUP + OBJECTS { + cLPolicyName, + cLPolicyRoleName, + cLPolicyEapType, + cLPolicyAclName, + cLPolicyVlanId, + cLPolicyQosProfile, + cLPolicySessionTimeout, + cLPolicySleepTimeout, + cLPolicyRowStatus, + cLPolicyFlexAclName, + cLPolicyAvcProfileName, + cLPolicyMdnsProfileName, + cLPolicyFlexVlanId, + cLPolicyUrlAclName, + cLPolicyOpendnsProfileName, + cLPolicyDeviceName, + cLPolicyDeviceRowStatus, + cLPolicyActiveStartTime, + cLPolicyActiveEndTime, + cLPolicyActiveHoursRowStatus, + cLPolicyWlanSchedulingStatus, + cLPolicyWlanSchedulingStartTime, + cLPolicyWlanSchedulingEndTime, + cLPolicyWlanSchedulingRowStatus + } + STATUS current + DESCRIPTION + "This collection of objects represents Policy related + configuration of WLANs on the controller." + ::= { ciscoLwappWlanMIBGroups 29 } + +END + + |