diff options
Diffstat (limited to 'MIBS/cisco/CISCOSB-IP')
| -rw-r--r-- | MIBS/cisco/CISCOSB-IP | 1528 |
1 files changed, 1528 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCOSB-IP b/MIBS/cisco/CISCOSB-IP new file mode 100644 index 0000000..d02cd45 --- /dev/null +++ b/MIBS/cisco/CISCOSB-IP @@ -0,0 +1,1528 @@ +CISCOSB-IP DEFINITIONS ::= BEGIN + +-- Title: CISCOSB IP Private Extension +-- Version: 7.45.00.00 +-- Date: 22 Jun 2006 + +IMPORTS + switch001 FROM CISCOSB-MIB + ipAddrEntry FROM IP-MIB + InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB + rip2IfConfEntry FROM RIPv2-MIB + ipCidrRouteEntry,ipCidrRouteDest, + ipCidrRouteMask, ipCidrRouteTos, ipCidrRouteNextHop FROM IP-FORWARD-MIB + Unsigned32, Integer32, Counter32, IpAddress, + MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI + TEXTUAL-CONVENTION, + DisplayString, RowStatus, TruthValue, PhysAddress, + TimeStamp, RowPointer, TestAndIncr, StorageType FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + InetAddress, InetAddressType, + InetAddressPrefixLength, + InetVersion, InetZoneIndex FROM INET-ADDRESS-MIB + InterfaceIndex FROM IF-MIB + IpAddressOriginTC, IpAddressStatusTC + FROM IP-MIB; + + +ipSpec MODULE-IDENTITY + LAST-UPDATED "200606220001Z" + ORGANIZATION "Cisco Systems, Inc." + + CONTACT-INFO + "Postal: 170 West Tasman Drive + San Jose , CA 95134-1706 + USA + + + Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>" + + DESCRIPTION + "The private MIB module definition for IP MIB." + REVISION "200606220000Z" + DESCRIPTION + "Initial version of this MIB." + ::= { switch001 26 } + + +-- +-- The textual conventions we define and use for rlIpAddressTable (in this MIB). +-- + +RlIpAddressOriginTC ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The origin of the address. + + following are same as ipAddressOriginTC in standard MIB: + + manual(2) indicates that the address was manually configured + to a specified address, e.g., by user configuration. + + dhcp(4) indicates an address that was assigned to this + system by a DHCP server. + + linklayer(5) indicates an address created by IPv6 stateless + auto-configuration. + + random(6) indicates an address chosen by the system at + random, e.g., an IPv4 address within 169.254/16, or an RFC + 3041 privacy address. + + following are additional to standard MIB: + + autoConfig(7) indicates that the address was auto configured configured + to a specified address, e.g., not by user configuration. + + eui64(8) indicates that the address was partially configured configured + to a specified address, e.g., address suffix is based on MAC address with + EUI-64 representation. + + tunnelIsatap(9) indicates that the address an ISATATP tunnel representation. + + tunnelIsatap(10) indicates that the address an 6to4 tunnel representation. + + tunnelIsatap(11) indicates that the address was partially configured configured + to a specified address, e.g., address prefix is preconfigured. + " + SYNTAX INTEGER { + other(1), + manual(2), + dhcp(4), + linklayer(5), + random(6), +-- additional to standard MIB + autoConfig(7), + eui64(8), + tunnelIsatap(9), + tunnel6to4(10), + generalPrefix(11) + } + + + +rsIpAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF RsIpAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is parralel to MIB II IpAddrTable, and is used to + add/delete entries to/from that table. In addition it contains + private objects." + ::= { ipSpec 1 } + +rsIpAddrEntry OBJECT-TYPE + SYNTAX RsIpAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The addressing information for one of this + entity's IP addresses." + INDEX {rsIpAdEntAddr} + ::= { rsIpAddrTable 1 } + +RsIpAddrEntry ::= SEQUENCE { + rsIpAdEntAddr IpAddress, + rsIpAdEntIfIndex INTEGER, + rsIpAdEntNetMask IpAddress, + rsIpAdEntForwardIpBroadcast INTEGER, + rsIpAdEntBackupAddr IpAddress, -- obsolete + rsIpAdEntStatus INTEGER, + rsIpAdEntBcastAddr INTEGER, + rsIpAdEntArpServer INTEGER, + rsIpAdEntName DisplayString, + rsIpAdEntOwner INTEGER, + rsIpAdEntAdminStatus INTEGER, + rsIpAdEntOperStatus INTEGER, + rsIpAdEntPrecedence INTEGER, + rsIpAdEntUniqueStatus INTEGER, + rsIpAdEntIcmpRedirectSend INTEGER +} + +rsIpAdEntAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address to which this entry's addressing + information pertains." + ::= { rsIpAddrEntry 1 } + +rsIpAdEntIfIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The index value which uniquely identifies the + interface to which this entry is applicable. The + interface identified by a particular value of this + index is the same interface as identified by the + same value of ifIndex." + ::= { rsIpAddrEntry 2 } + +rsIpAdEntNetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The subnet mask associated with the IP address of + this entry. The value of the mask is an IP + address with all the network bits set to 1 and all + the hosts bits set to 0." + ::= { rsIpAddrEntry 3 } + +rsIpAdEntForwardIpBroadcast OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " This variable controls forwarding of IP (sub)net-directed + broadcasts destined for an attached sub(net). " + DEFVAL { enable } + ::= { rsIpAddrEntry 4 } + +rsIpAdEntBackupAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "In case there are two IP routers in the domain, + the address of the second IP router." + ::= { rsIpAddrEntry 5 } + +rsIpAdEntStatus OBJECT-TYPE + SYNTAX INTEGER{ + valid(1), + invalid(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " The validity of this entry. Invalid indicates that this entry is + invalid in IpAddrTable (MIB II)." + DEFVAL { valid } + ::= { rsIpAddrEntry 6 } + +rsIpAdEntBcastAddr OBJECT-TYPE + SYNTAX INTEGER (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " Indicates how the host part of ip subnet broadcast messages will be + filled: + 0 - host part will be filled by 0 + 1 - host part will be filled by 1." + ::= { rsIpAddrEntry 7 } + +rsIpAdEntArpServer OBJECT-TYPE + SYNTAX INTEGER{ + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether the router will reply to incoming ARP requests on + this interface, providing the physical address corresponding to this + IP interface." + DEFVAL { disable } + ::= { rsIpAddrEntry 8 } + + rsIpAdEntName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..30)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP Interface name" + ::= { rsIpAddrEntry 9 } + +rsIpAdEntOwner OBJECT-TYPE + SYNTAX INTEGER{ + static(1), + dhcp(2), + internal(3), + default(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP Interface owner. Static if interface defined by user, dhcp + if received by boot protocol like DHCP and internal + for internal usage." + DEFVAL { static } + ::= { rsIpAddrEntry 10 } + +rsIpAdEntAdminStatus OBJECT-TYPE + SYNTAX INTEGER{ + up(1), + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP Interface admin status." + DEFVAL { up } + ::= { rsIpAddrEntry 11 } + +rsIpAdEntOperStatus OBJECT-TYPE + SYNTAX INTEGER { + active(1), + inactive(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If active the interface can be used to send and receive frames." + ::= { rsIpAddrEntry 12 } + +rsIpAdEntPrecedence OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP preference, to be selected as source IP for rsIpAdEntIfIndex. + this source IP selection is first by preference value. + if more than one IP has the same preference the one with the + lowest IP is selected. + (higher value -> higher preference)" + DEFVAL { 1 } + ::= { rsIpAddrEntry 13 } + +rsIpAdEntUniqueStatus OBJECT-TYPE + SYNTAX INTEGER { + valid (1), + validDuplicated (2), + tentative (3), + duplicated (4), + delayed (5), + notReceived (6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The IP address unique status defines IP address + state in an assignment process and + after duplication detection." + ::= { rsIpAddrEntry 14 } + +rsIpAdEntIcmpRedirectSend OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enables or disables sending of ICMP redirect messages to + re-send a packet through the same interface on which the packet was + received." + DEFVAL { enable } + ::= { rsIpAddrEntry 15 } + +icmpSpec OBJECT IDENTIFIER ::= { ipSpec 2 } + +rsIcmpGenErrMsgEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable controlls the ability to generate ICMP error messages" + DEFVAL { enable } + ::= { icmpSpec 1 } + +rsIcmpRdTable OBJECT-TYPE + SYNTAX SEQUENCE OF RsIcmpRdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains ICMP Router Discovery parameters + configurated per IP interface." + ::= {icmpSpec 2} + +rsIcmpRdEntry OBJECT-TYPE + SYNTAX RsIcmpRdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ICMP parameters configurated for IP interface." + INDEX {rsIcmpRdIpAddr} + ::= {rsIcmpRdTable 1} + +RsIcmpRdEntry ::= SEQUENCE { + rsIcmpRdIpAddr IpAddress, + rsIcmpRdIpAdvertAddr IpAddress, + rsIcmpRdMaxAdvertInterval INTEGER, + rsIcmpRdMinAdvertInterval INTEGER, + rsIcmpRdAdvertLifetime INTEGER, + rsIcmpRdAdvertise INTEGER, + rsIcmpRdPreferenceLevel INTEGER, + rsIcmpRdEntStatus INTEGER + } + +rsIcmpRdIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address to which this entry's information pertains." + ::= {rsIcmpRdEntry 1} + +rsIcmpRdIpAdvertAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " The IP destination address to be used for multicast + Router Advertisements sent from the interface. The + only permissible values are the all-systems multicast + address, 224.0.0.1, or the limited-broadcast address, + 255.255.255.255." + DEFVAL {'E0000001'H} + ::= {rsIcmpRdEntry 2} + +rsIcmpRdMaxAdvertInterval OBJECT-TYPE + SYNTAX INTEGER (4..1800) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum time allowed between sending multicast + Router Advertisements from the interface, in seconds. + Must be no less than 4 seconds and no greater than 1800 + seconds." + DEFVAL {600} + ::= {rsIcmpRdEntry 3} + +rsIcmpRdMinAdvertInterval OBJECT-TYPE + SYNTAX INTEGER (3..1800) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum time allowed between sending unsolicited + multicast Router Advertisements from the interface, in + seconds. Must be no less than 3 seconds and no greater + than rsIcmpRdMaxAdvertInterval. + Default: 0.75 * rsIcmpRdMaxAdvertInterval." + ::= {rsIcmpRdEntry 4} + +rsIcmpRdAdvertLifetime OBJECT-TYPE + SYNTAX INTEGER (4..9000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum length of time that the advertised addresses + are to be considered as valid. Must be no less than + rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. + Default: 3 * rsIcmpRdMaxAdvertInterval." + ::= {rsIcmpRdEntry 5} + +rsIcmpRdAdvertise OBJECT-TYPE + SYNTAX INTEGER { + enable (1), + disable (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A flag indicating whether or not the address is to be + advertised." + DEFVAL {enable} + ::= {rsIcmpRdEntry 6} + +rsIcmpRdPreferenceLevel OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The preferability of the address as a default router + address, relative to other router addresses on the same + subnet." + DEFVAL {0} + ::= {rsIcmpRdEntry 7} + +rsIcmpRdEntStatus OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting of any value to this object set values of + all fields to the default values." + ::= {rsIcmpRdEntry 8} + + +rip2Spec OBJECT IDENTIFIER ::= { ipSpec 3 } +-- see rlIpRouters + +arpSpec OBJECT IDENTIFIER ::= { ipSpec 4 } + +rsArpDeleteTable OBJECT-TYPE + SYNTAX INTEGER { + noAction(0), -- for get only + deleteArpTab(1), + deleteIpArpDynamicEntries(2), + deleteIpArpStaticEntries(3), + deleteIpArpDelDynamicRefreshStatic(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION +-- old description +-- "Setting this object to any not-null value has the effect of deleting +-- all entries of the ARP table." +-- new description + "Setting to value deleteArpTab(1): deletes the arp table - + static and dynamic entries + deleteIpArpDynamicEntries(2): delete all dynamic entries + deleteIpArpStaticEntries(3): delete all static entries + deleteIpArpDelDynamicRefreshStatic(4) - delete all dynamic - + refresh static, thus + refrashing FFT. + on get returns the last action" + ::= { arpSpec 1 } + +-- range 0 to 40,000,000 to allow system convesion to timer +rsArpInactiveTimeOut OBJECT-TYPE + SYNTAX Unsigned32 (0..40000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable defines the maximum time period (in second) that can + pass between ARP requests concerning an entry in the ARP table. + After this time period, the entry is deleted from the table. + Default value 0 means using value based on IP forwarding mode." + DEFVAL { 0 } + ::= { arpSpec 2 } + +rsArpProxy OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When ARP Proxy is enabled, the router can respond to + ARP requests for nodes located on a different sub-net, + provided they are it its network table. The router responds + with its own MAC address. + When ARP Proxy is disabled, the router responds only + to ARP requests for its own IP addresses." + DEFVAL { disable } + ::= { arpSpec 3 } + +rsArpRequestsSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays how many ARP requests have been sent out to an ARP server + for address resolution." + ::= { arpSpec 4 } + +rsArpRepliesSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays how many ARP replies have been sent out to an ARP client + in response to request packets." + ::= { arpSpec 5 } + +rsArpProxyRepliesSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays how many proxy ARP replies have been sent out in response + to request packets. A proxy router serving as a gateway to a subnet + would respond with a proxy reply." + ::= { arpSpec 6 } + +rsArpUnresolveTimer OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies the frequency in seconds in which to send out ARP + requests to resolve the Next Hop MAC address." + ::= { arpSpec 7 } + +rsArpMibVersion OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "MIB's version, the current version is 2. + Version 1: + rsArpDeleteTable + Setting this object to any not-null value has the effect + of deleting all entries of the ARP table. + Version 2: + rsArpDeleteTable + Setting to value deleteArpTab(1): deletes the arp table - + static and dynamic entries + deleteIpArpDynamicEntries(2): delete all dynamic entries + deleteIpArpStaticEntries(3): delete all static entries + deleteIpArpDelDynamicRefreshStatic(4): + delete all dynamic - + refresh static, thus + refrashing FFT. + on get returns the last action. + New MIB variables support: + rsArpRequestsSent + rsArpRepliesSent + rsArpProxyRepliesSent + rsArpUnresolveTimer + rsArpMibVersion + Version 3: + New MIB variables support: + rsArpStaticTable + rsArpInterfaceTable" + ::= { arpSpec 8 } + +rsArpStaticTable OBJECT-TYPE + SYNTAX SEQUENCE OF RsArpStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table used for adding static ARP entries + without specifying Layer 2 interface." + ::= { arpSpec 9 } + +rsArpStaticEntry OBJECT-TYPE + SYNTAX RsArpStaticEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one IpAddress to `physical' address equivalence." + INDEX { rsArpStaticIpAddress } + ::= { rsArpStaticTable 1 } + +RsArpStaticEntry ::= SEQUENCE { + rsArpStaticIpAddress IpAddress, + rsArpStaticPhysAddress PhysAddress, + rsArpStaticRowStatus RowStatus + } + +rsArpStaticIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IpAddress corresponding to the media-dependent `physical' address." + ::= { rsArpStaticEntry 1 } + +rsArpStaticPhysAddress OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The media-dependent `physical' address." + ::= { rsArpStaticEntry 2 } + + +rsArpStaticRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Entry status." + ::= { rsArpStaticEntry 3 } + + +rsArpInterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF RsArpInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "L2 Interface specific configuration for ARP Application. + Entry in this table will be dynamically created, + when first IP Address is defined on specific L2 interface, + and destroyed when the last IP address on this L2 interface is removed" + ::= { arpSpec 10 } + +rsArpInterfaceEntry OBJECT-TYPE + SYNTAX RsArpInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains L2 Interface specific configuration + for ARP Application." + INDEX { rsArpInterfaceIfIndex } + ::= { rsArpInterfaceTable 1 } + +RsArpInterfaceEntry ::= SEQUENCE { + rsArpInterfaceIfIndex InterfaceIndex, + rsArpInterfaceInactiveTimeOut Unsigned32, + rsArpInterfaceArpProxy INTEGER + } + +rsArpInterfaceIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface to + which this entry is applicable. The interface identified by + a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { rsArpInterfaceEntry 1 } + +rsArpInterfaceInactiveTimeOut OBJECT-TYPE + SYNTAX Unsigned32 (0..40000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable defines the maximum time period (in second) that can + pass between ARP requests concerning an entry in the ARP table. + After this time period, the entry is deleted from the table. + Default value 0 means using value from rsArpInactiveTimeOut" + DEFVAL { 0 } + ::= { rsArpInterfaceEntry 2 } + +rsArpInterfaceArpProxy OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When ARP Proxy is enabled, the router can respond to + ARP requests for nodes located on a different sub-net, + provided they are it its network table. The router responds + with its own MAC address. + When ARP Proxy is disabled, the router responds only + to ARP requests for its own IP addresses." + DEFVAL { disable } + ::= { rsArpInterfaceEntry 3 } + +rsArpNumOfEntries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Displays how many ARP entries stored in ARP Table." + ::= { arpSpec 11 } + + +tftp OBJECT IDENTIFIER ::= { ipSpec 5 } + +rsTftpRetryTimeOut OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " General Retransmission time-out value (seconds) " + DEFVAL { 15 } + ::= { tftp 1 } + +rsTftpTotalTimeOut OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " Total Retransmission time-out value (seconds) " + DEFVAL { 60 } + ::= { tftp 2 } + +rsSendConfigFile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The file name include path where the Router Server will put the full + configuration. The default destination address will be the sender + address." + ::= { tftp 3 } + +rsGetConfigFile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The file name include path where the Router Server will get the full + configuration from. The default destination address will be the sender + address." + ::= { tftp 4 } + +rsLoadSoftware OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The file name include path where the Router Server will get the + software. The default source address will be the sender address." + ::= { tftp 5 } + +rsFileServerAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IP address of the configuration / sw server." + ::= { tftp 6 } + +rsSoftwareDeviceName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..8)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Software Device Name specifies a device name, using this Software" + ::= { tftp 7 } + +rsSoftwareFileAction OBJECT-TYPE + SYNTAX INTEGER { + download(1), + upload (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Holds the current action done on the software file " + DEFVAL {download } + ::= {tftp 8 } + +ipRedundancy OBJECT IDENTIFIER ::= { ipSpec 6 } +-- see rlIpRouter.mib + +ipRouteLeaking OBJECT IDENTIFIER ::= { ipSpec 7 } +-- see rlIpRouter.mib + +ipRipFilter OBJECT IDENTIFIER ::= { ipSpec 8 } +-- see rlIpRouter.mib + +rsRipEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2), + shutdown(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables, disables or shutdown (doesn't delete configuration) RIP." +::= { ipSpec 9 } + +rsTelnetPassword OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "" + ::= { ipSpec 11 } + +rlTranslationNameToIpTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlTranslationNameToIpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table translates IP interfaces's name to + IP interface's address" + ::= { ipSpec 12 } + +rlTranslationNameToIpEntry OBJECT-TYPE + SYNTAX RlTranslationNameToIpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The row definition for this table." + INDEX { IMPLIED rlTranslationNameToIpName } + ::= { rlTranslationNameToIpTable 1 } + +RlTranslationNameToIpEntry ::= SEQUENCE { + rlTranslationNameToIpName DisplayString, + rlTranslationNameToIpIpAddr IpAddress +} + +rlTranslationNameToIpName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..30)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Interface name" + ::= { rlTranslationNameToIpEntry 1 } + +rlTranslationNameToIpIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Interface address" + ::= { rlTranslationNameToIpEntry 2 } + +-- Mib for Preferance among routing protocols: +-- Range value 0..255 . O is most preferred, 255 never used for forwarding. +-- only exception is direct which range 0..254 we prevent direct from becoming unreachable +-- (according to RFC1812 section 5.2.4) + +rlIpRoutingProtPreference OBJECT IDENTIFIER ::= { ipSpec 13 } +-- see rlIpRouter.mib + +rlOspf OBJECT IDENTIFIER ::= { ipSpec 14 } +-- see rlIpRouter.mib + +--IP address table mib ver + +rlIpAddrTableMibVersion OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IpAddrTable MIB's version." + ::= {ipSpec 15 } + +rlIpCidrRouteExtTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpCidrRouteExtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Augmenting ipCidrRouteTable (ip forwarfing information table) + for added info as read only" + ::= {ipSpec 16 } + +rlIpCidrRouteExtEntry OBJECT-TYPE + SYNTAX RlIpCidrRouteExtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row of the table ipCidrRouteTable Extended + by this definition." + AUGMENTS { ipCidrRouteEntry } + ::= {rlIpCidrRouteExtTable 1 } + +RlIpCidrRouteExtEntry ::= SEQUENCE { + rlIpCidrRouteProto INTEGER +} + +rlIpCidrRouteProto OBJECT-TYPE + SYNTAX INTEGER { + local(1), -- local interface + netmgmt(2), -- static route + rip(3), -- Berkeley RIP or RIP-II + ospfInternal(4), -- Open Shortest Path First Internal Route + ospfExternal(5), -- Open Shortest Path First External Route + ospfAggregateNetRange(6), -- Open Shortest Path First + bgp4Internal(7), -- Border Gateway Protocol Internal Route + bgp4External(8), -- Border Gateway Protocol External Route + aggregateRoute(9), -- + other(10) -- not specified + } + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Added infor for ipCidrRouteTable. + extends the info of ipCidrRouteProto to show the route inner protocol. + Allowes the user to see which type of route in the protocol + e.g. ospf internal, ospf external." + ::= { rlIpCidrRouteExtEntry 1 } + + +rlIpStaticRoute OBJECT IDENTIFIER ::= { ipSpec 17 } + +rlIpStaticRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpStaticRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entity's static (user configured) IP Routing table. + entries are MAX-ACCESSible even if not used for forwarding " + ::= { rlIpStaticRoute 1 } + +rlIpStaticRouteEntry OBJECT-TYPE + SYNTAX RlIpStaticRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A particular Static(user configured) route to a particular destina- + tion, under a particular policy." + INDEX { rlIpStaticRouteDest, + rlIpStaticRouteMask, + rlIpStaticRouteTos, + rlIpStaticRouteNextHop } + ::= { rlIpStaticRouteTable 1 } + + +RlIpStaticRouteEntry ::= SEQUENCE { + rlIpStaticRouteDest IpAddress, + rlIpStaticRouteMask IpAddress, + rlIpStaticRouteTos INTEGER, + rlIpStaticRouteNextHop IpAddress, + rlIpStaticRouteMetric INTEGER, + rlIpStaticRouteType INTEGER, + rlIpStaticRouteNextHopAS INTEGER, + rlIpStaticRouteForwardingStatus INTEGER, + rlIpStaticRouteRowStatus RowStatus, + rlIpStaticRouteOwner INTEGER + } + +rlIpStaticRouteDest OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The destination IP address of this route. + This object may not take a Multicast (Class D) + address value. + Any assignment (implicit or otherwise) of an + instance of this object to a value x must be + rejected if the bitwise logical-AND of x with + the value of the corresponding instance of the + rlIpStaticRouteMask object is not equal to x." + ::= { rlIpStaticRouteEntry 1 } + +rlIpStaticRouteMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicate the mask to be logical-ANDed with the + destination address before being compared to + the value in the rlIpStaticRouteDest field. For + those systems that do not support arbitrary + subnet masks, an agent constructs the value of + the rlIpStaticRouteMask by reference to the IP Ad- + dress Class. + Any assignment (implicit or otherwise) of an + instance of this object to a value x must be + rejected if the bitwise logical-AND of x with + the value of the corresponding instance of the + rlIpStaticRouteDest object is not equal to ipCidrRoute- + Dest." + ::= { rlIpStaticRouteEntry 2 } + +rlIpStaticRouteTos OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "See ipCidrRouteTos definition + For now only value 0 is valid" + ::= { rlIpStaticRouteEntry 3 } + +rlIpStaticRouteNextHop OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "On remote routes, the address of the next sys- + tem en route; Otherwise, 0.0.0.0." + ::= { rlIpStaticRouteEntry 4 } + +rlIpStaticRouteMetric OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The routing metric for this route. + The semantics of this metric are determined by the user. + normal semantic will be next hop count or some administarative distance + to create routing policy." + ::= { rlIpStaticRouteEntry 5 } + +rlIpStaticRouteType OBJECT-TYPE + SYNTAX INTEGER { + reject (1), -- route which discards traffic + local (2), -- local interface + remote (3) -- remote destination + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of route. Note that local(3) refers + to a route for which the next hop is the final + destination this is the case when user overides the a local interface + entry to change it parameters; + remote(4) refers to a route for + which the next hop is not the final destina- + tion. + reject (2) refers to a route which, if matched, discards + the message as unreachable. This is may be used as a means of + correctly aggregating routes, When static routes are distributed (leaked) + to other protocols." + ::= { rlIpStaticRouteEntry 6 } + +rlIpStaticRouteNextHopAS OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Autonomous System Number of the Next Hop. + The semantics of this object are determined by + the routing-protocol specified in the route's + ipCidrRouteProto value. When this object is + unknown or not relevant its value should be set + to zero." + DEFVAL { 0 } + ::= { rlIpStaticRouteEntry 7 } + +rlIpStaticRouteForwardingStatus OBJECT-TYPE + SYNTAX INTEGER { + active (1), + inactive (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "active - An indication that the route has implication on routing + inactive - the route is a backup route or it is down. It is not used + in forwarding decision. + Down means that the Ip interface on which it is configured is down. + (Note: ip interface down may be for two reason - its admin status or + the L2 interface , on which the ip interface is configured, status" + ::= { rlIpStaticRouteEntry 8 } + +rlIpStaticRouteRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status variable, used according to + row installation and removal conventions." + ::= { rlIpStaticRouteEntry 9 } + +rlIpStaticRouteOwner OBJECT-TYPE + SYNTAX INTEGER { + static (1), + dhcp (2), + default (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Static - The route is configured over Static IP. + This route is written to configuration files. + Dhcp - The route is Configured by DHCP + (received as part of DHCP configuration) + This route IS NOT written to configuration files + Dhcp - The route is Configured default system config + exist till any other configuration + is applied" + ::= { rlIpStaticRouteEntry 10 } + +rlIpRouter OBJECT IDENTIFIER ::= { ipSpec 18 } + + +rlIpAddressesNumber OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable specifies current number of entries in rsIpAddrTable." + DEFVAL { 0 } + ::= { ipSpec 23 } + +rlIpStaticPrefixesNumber OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable specifies current number of static prefixes in the system." + DEFVAL { 0 } + ::= { ipSpec 24 } + +rlIpTotalPrefixesNumber OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable specifies current total number of prefixes in the system." + DEFVAL { 0 } + ::= { ipSpec 25 } + +--- rlManagementIPv4 + +rlManagementIpv4 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The system management IPv4 address which is kept between system modes changes" + ::= { ipSpec 32 } + +rlManagementIpv4Action OBJECT-TYPE + SYNTAX INTEGER { + clear (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The system management IPv4 action: + clear - delete all ipv4 interfaces from startup configuration database except rlManagementIpv4" + ::= { ipSpec 33 } + +rlManagementIpIfindex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The system management IPs addresses ifIndex which is kept between system modes changes" + ::= { ipSpec 34 } + +rlSourceAddressSelectionTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlSourceAddressSelectionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The table specifies IPv4 and IPv6 source + interfaces per application. Only supported + applications are present in the table." + ::= { ipSpec 35 } + +rlSourceAddressSelectionEntry OBJECT-TYPE + SYNTAX RlSourceAddressSelectionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The row definition for this table." + INDEX { IMPLIED rlSourceAddressSelectionApp} + ::= { rlSourceAddressSelectionTable 1 } + + +RlSourceAddressSelectionEntry ::= SEQUENCE { + rlSourceAddressSelectionApp DisplayString, + rlSourceAddressSelectionInterfaceIPv4 InterfaceIndexOrZero, + rlSourceAddressSelectionInterfaceIPv6 InterfaceIndexOrZero +} + +rlSourceAddressSelectionApp OBJECT-TYPE + SYNTAX DisplayString(SIZE(1..160)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The application which source interfaces are + defined in the entry." + ::= { rlSourceAddressSelectionEntry 1 } + +rlSourceAddressSelectionInterfaceIPv4 OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The ifIndex value of source interface for IPv4 address. + Zero means the interface is undefined." + DEFVAL { 0 } + ::= { rlSourceAddressSelectionEntry 2 } + +rlSourceAddressSelectionInterfaceIPv6 OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The ifIndex value of source interface for IPv6 address. + Zero means the interface is undefined." + DEFVAL { 0 } + ::= { rlSourceAddressSelectionEntry 3 } + + + +-- +-- Internet Address Table (Private/Extension) +-- + +rlIpAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is parralel to MIB II ipAddressTable, and is used to + add/delete entries to/from that table. + The table contains addressing information relevant to the + entity's interfaces. + + In addition to ipAddressTable defined in standard MIB a represenattion of + IPv6 addresses based on additionl address origin such as EUI-64, general + prefix etc. + In this case the address information is partial address information. + Together with the address origin and the general prefix (when needed) user can + construct full address information. + + The index (key) for this table includes this information additionally to the address." + ::= { ipSpec 36 } + +rlIpAddressEntry OBJECT-TYPE + SYNTAX RlIpAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An address mapping for a particular interface." + INDEX { rlIpAddressAddrType, + rlIpAddressAddr, + rlIpAddressOrigin, + rlIpAddressGeneralPrefixName } + ::= { rlIpAddressTable 1 } + +RlIpAddressEntry ::= SEQUENCE { + rlIpAddressAddrType InetAddressType, + rlIpAddressAddr InetAddress, + rlIpAddressOrigin RlIpAddressOriginTC, + rlIpAddressGeneralPrefixName + DisplayString, + rlIpAddressIfIndex InterfaceIndex, + rlIpAddressExtdType INTEGER, + rlIpAddressPrefix RowPointer, + rlIpAddressStatus IpAddressStatusTC, + rlIpAddressCreated TimeStamp, + rlIpAddressLastChanged TimeStamp, + rlIpAddressRowStatus RowStatus, + rlIpAddressStorageType StorageType, + rlIpAddressExtdPrefixLength InetAddressPrefixLength, + rlIpAddressCompleteAddr InetAddress, + rlIpAddressOperStatus INTEGER + } + +rlIpAddressAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The address type of rlIpAddressAddr." + ::= { rlIpAddressEntry 1 } + +rlIpAddressAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP address to which this entry's addressing information + pertains. The address type of this object is specified in + rlIpAddressAddrType. + + In case of auto-configure address such as eui-64, general-prefix and others + it contains the partial address before appropriate manipulation. + + Implementors need to be aware that if the size of + rlIpAddressAddr exceeds 116 octets, then OIDS of instances of + columns in this row will have more than 128 sub-identifiers + and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. + + Note: + Since interpeak doesnt use origin, 3rd index (key) - rlIpAddressOrigin, as part of the key, + we assume that no same address can exists from different origins." + ::= { rlIpAddressEntry 2 } + +-- additional to standard MIB (1) + +rlIpAddressOrigin OBJECT-TYPE + SYNTAX RlIpAddressOriginTC + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The origin of the address." + ::= { rlIpAddressEntry 3 } + +rlIpAddressGeneralPrefixName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name assigned to the prefix." + ::= { rlIpAddressEntry 4 } + +-- (1) + +rlIpAddressIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface to + which this entry is applicable. The interface identified by + a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { rlIpAddressEntry 5 } + +rlIpAddressExtdType OBJECT-TYPE + SYNTAX INTEGER { + unicast(1), + anycast(2), + broadcast(3), + multicast(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Extend standard field ipAddressType to multicast" + DEFVAL { unicast } + ::= { rlIpAddressEntry 6 } + +rlIpAddressPrefix OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A pointer to the row in the prefix table to which this + address belongs. May be { 0 0 } if there is no such row." + DEFVAL { zeroDotZero } + ::= { rlIpAddressEntry 7 } + +-- following filed has changed to a key (2) +-- rlIpAddressOrigin OBJECT-TYPE +-- SYNTAX IpAddressOriginTC +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- "The origin of the address." +-- ::= { rlIpAddressEntry 8 } +-- (2) + +rlIpAddressStatus OBJECT-TYPE + SYNTAX IpAddressStatusTC + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the address, describing if the address can be + used for communication. + + In the absence of other information, an IPv4 address is + always preferred(1)." + DEFVAL { preferred } + ::= { rlIpAddressEntry 8 } + +rlIpAddressCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this entry was created. + If this entry was created prior to the last re- + initialization of the local network management subsystem, + then this object contains a zero value." + ::= { rlIpAddressEntry 9 } + +rlIpAddressLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this entry was last + updated. If this entry was updated prior to the last re- + initialization of the local network management subsystem, + then this object contains a zero value." + ::= { rlIpAddressEntry 10 } + +rlIpAddressRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. + + The RowStatus TC requires that this DESCRIPTION clause + states under which circumstances other objects in this row + can be modified. The value of this object has no effect on + whether other objects in this conceptual row can be + modified. + + A conceptual row can not be made active until the + rlIpAddressIfIndex has been set to a valid index." + ::= { rlIpAddressEntry 11 } + +rlIpAddressStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row. If this object + has a value of 'permanent', then no other objects are + required to be able to be modified." + DEFVAL { volatile } + ::= { rlIpAddressEntry 12 } + + +-- additional fields - based on 'ipAddressEntry' augmentation (3) + +rlIpAddressExtdPrefixLength OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The prefix length of this address." + DEFVAL { 64 } + ::= { rlIpAddressEntry 13 } + +rlIpAddressCompleteAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Complete IP address to which this entry's addressing information + pertains. + + In case of auto-configure address such as eui-64, general-prefix and others + it contains the complete address after appropriate manipulation" + ::= { rlIpAddressEntry 14 } + +-- (3) + +rlIpAddressOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of the IP address." + ::= { rlIpAddressEntry 15 } + +rlIpDefaultDSCP OBJECT-TYPE +SYNTAX INTEGER(0..63) +MAX-ACCESS read-write +STATUS current +DESCRIPTION + "The default value inserted into the DSCP + field of the IP header of datagrams originated at + this entity, whenever a DSCP value is not supplied + by the application." +::= { ipSpec 37 } + +rlIpDefaultUP OBJECT-TYPE +SYNTAX INTEGER(0..7) +MAX-ACCESS read-write +STATUS current +DESCRIPTION + "The default value inserted into the User Priority + field in the 802.1q VLAN tag of IPv4 frames sent by the + CPU." +::= { ipSpec 38 } + +rlIpv4MtuSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the maximum transmission unit (MTU) size in bytes of IPv4 packets (payload)." + ::= { ipSpec 39 } + +rlIcmpCountersClear OBJECT-TYPE + SYNTAX INTEGER { + clear (0) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "clear - delete all icmp counters" + ::= { ipSpec 40 } + +rlIpCountersClear OBJECT-TYPE + SYNTAX INTEGER { + clear (0) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "clear - delete all ip counters" + ::= { ipSpec 41 } + +rlManagementIpPortIfindex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The system management port ifIndex" + ::= { ipSpec 42 } + +END + + |