diff options
Diffstat (limited to 'MIBS/cisco/CISCOSB-SYSMNG-MIB')
| -rw-r--r-- | MIBS/cisco/CISCOSB-SYSMNG-MIB | 531 |
1 files changed, 531 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCOSB-SYSMNG-MIB b/MIBS/cisco/CISCOSB-SYSMNG-MIB new file mode 100644 index 0000000..9e1e121 --- /dev/null +++ b/MIBS/cisco/CISCOSB-SYSMNG-MIB @@ -0,0 +1,531 @@ +CISCOSB-SYSMNG-MIB DEFINITIONS ::= BEGIN + +-- Version: 7.50 +-- Date: 31 Oct 2010 +-- 31-Oct-2010 Added rlSysmngTcamAllocationsTable +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE,Counter32, + Unsigned32 FROM SNMPv2-SMI + TruthValue, RowStatus, RowPointer, + TEXTUAL-CONVENTION,DisplayString FROM SNMPv2-TC + Counter64, OBJECT-TYPE FROM SNMPv2-SMI + Percents,switch001 FROM CISCOSB-MIB; + + +rlSysmngMib MODULE-IDENTITY + LAST-UPDATED "201010310000a" + ORGANIZATION "Cisco Systems, Inc." + + CONTACT-INFO + "Postal: 170 West Tasman Drive + San Jose , CA 95134-1706 + USA + + + Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>" + + DESCRIPTION + "The private MIB module definition for System Manager pool." + REVISION "201010310000a" + DESCRIPTION + "Initial revision." + ::= { switch001 204 } + +SysmngResourceRouteType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Supported router resource types" + SYNTAX INTEGER { + ipv4(1), + ipv6(2), + ipmv4(3), + ipmv6(4), + nonIp(5), + ipv4Policy(6), + ipv6Policy(7), + vlanMapping(8), + totalCount(9) +} + +SysmngResourceRouteUsageType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Supported router resource usage types" + SYNTAX INTEGER { + ipv4Neighbor(1), + ipv4Address(2), + ipv4Route(3), + ipv6Neighbor(4), + ipv6Address(5), + ipv6OnlinkPrefix(6), + ipv6Route(7), + ipmv4Route(8), + ipmv4RouteStarG(9), + ipmv6Route(10), + ipmv6RouteStarG(11), + ipv4PolicyRoute(12), + ipv6PolicyRoute(13), + vlanMapping(14) +} + +SysmngPoolType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Supported TCAM pools." + SYNTAX INTEGER { + router(1), + iscsi(2), + voip(3), + misc(4) -- Miscellaneous pool - uses all TCAM entries that + -- previous pools (Router/ISCSI) + -- didn't reserved +} + +-- System Manager Tcam Allocations Table + + rlSysmngTcamAllocations OBJECT IDENTIFIER + ::= { rlSysmngMib 1 } + + rlSysmngTcamAllocationsTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlSysmngTcamAllocationsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing tcam allocations information. + Each row represents objects for a defined profile." + ::= { rlSysmngTcamAllocations 1 } + + rlSysmngTcamAllocationsEntry OBJECT-TYPE + SYNTAX RlSysmngTcamAllocationsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Single entry containing tcam allocations information + per predefined profile and specific pool." + INDEX { rlSysmngTcamAllocProfileName, rlSysmngTcamAllocPoolType } + ::= { rlSysmngTcamAllocationsTable 1 } + + RlSysmngTcamAllocationsEntry ::= SEQUENCE { + rlSysmngTcamAllocProfileName DisplayString, + rlSysmngTcamAllocPoolType SysmngPoolType, + + rlSysmngTcamAllocMinRequiredEntries Unsigned32, + rlSysmngTcamAllocStaticConfigEntries Unsigned32, + rlSysmngTcamAllocInUseEntries Unsigned32, + rlSysmngTcamAllocPoolSize Unsigned32 + } + + rlSysmngTcamAllocProfileName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The profile name for tcam allocation. + Must be unique per entry. This is an index into the table. + 'tcam0' profile contains policy tcam counters + 'tcam1' profile contains router tcam counters" + ::= { rlSysmngTcamAllocationsEntry 1 } + + rlSysmngTcamAllocPoolType OBJECT-TYPE + SYNTAX SysmngPoolType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Pool type. + Must be unique per entry. This is an index into the table." + ::= { rlSysmngTcamAllocationsEntry 2 } + + + rlSysmngTcamAllocMinRequiredEntries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of minimal hardware entries, required by pool to operate." + DEFVAL { 0 } + ::= { rlSysmngTcamAllocationsEntry 3 } + + rlSysmngTcamAllocStaticConfigEntries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of hardware entries, in use by static configuration of the pool." + DEFVAL { 0 } + ::= { rlSysmngTcamAllocationsEntry 4 } + + rlSysmngTcamAllocInUseEntries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of hardware entries, currently in use by the pool. + This number includes minimum, static and dynamic entries." + DEFVAL { 0 } + ::= { rlSysmngTcamAllocationsEntry 5 } + + rlSysmngTcamAllocPoolSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of hardware entries reserved for the pool." + DEFVAL { 0 } + ::= { rlSysmngTcamAllocationsEntry 6 } + +-- System Manager Router Resource Table + +rlSysmngResource OBJECT IDENTIFIER + ::= { rlSysmngMib 2 } + +-- This is going to be deprecated and instead, rlSysmngResourcePerUnitTable +-- should be used +rlSysmngResourceTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlSysmngResourceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A read-only table for displaying router resources configuration, + properties, and usage per resource." + ::= { rlSysmngResource 1 } + +rlSysmngResourceEntry OBJECT-TYPE + SYNTAX RlSysmngResourceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Single entry containing specific router resource information." + INDEX { rlSysmngResourceRouteType } + ::= { rlSysmngResourceTable 1 } + +RlSysmngResourceEntry ::= SEQUENCE { + rlSysmngResourceRouteType SysmngResourceRouteType, + rlSysmngResourceCurrentUse Unsigned32, + rlSysmngResourceCurrentUseHw Unsigned32, + rlSysmngResourceCurrentMax Unsigned32, + rlSysmngResourceCurrentMaxHw Unsigned32, + rlSysmngResourceTemporaryMax Unsigned32, + rlSysmngResourceTemporaryMaxHw Unsigned32, + rlSysmngResourceCurrentNexthopMax Unsigned32, + rlSysmngResourceCurrentNexthopMaxHw Unsigned32, + rlSysmngResourceCurrentNexthopUse Unsigned32, + rlSysmngResourceCurrentNexthopUseHw Unsigned32 +} + +rlSysmngResourceRouteType OBJECT-TYPE + SYNTAX SysmngResourceRouteType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Router resource type." + ::= { rlSysmngResourceEntry 1 } + +rlSysmngResourceCurrentUse OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Currently in used number of routes." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 2 } + +rlSysmngResourceCurrentUseHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Currently in used number of HW FFT entries" + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 3 } + +rlSysmngResourceCurrentMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The running maximum supported number of routes." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 4 } + +rlSysmngResourceCurrentMaxHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The running maximum supported number of HW FFT entries." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 5 } + +rlSysmngResourceTemporaryMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The temporary maximum supported number of routes." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 6 } + +rlSysmngResourceTemporaryMaxHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The temporary maximum supported number of HW FFT entries." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 7 } + +rlSysmngResourceCurrentNexthopMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum supported number of nexthop entries." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 8 } + +rlSysmngResourceCurrentNexthopMaxHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum supported number of HW nexthop entries." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 9 } + +rlSysmngResourceCurrentNexthopUse OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of nexthop entries." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 10 } + +rlSysmngResourceCurrentNexthopUseHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of HW nexthop entries." + DEFVAL { 0 } + ::= { rlSysmngResourceEntry 11 } + +-- System Manager Router Resource Action +rlSysmngRouterResourceAction OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Router resource action." + ::= { rlSysmngMib 3 } + +-- System Manager Router Resource Table + +rlSysmngResourceUsage OBJECT IDENTIFIER + ::= { rlSysmngMib 4 } + +rlSysmngResourceUsageTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlSysmngResourceUsageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A read-only table for displaying router resources configuration, + properties, and usage per resource." + ::= { rlSysmngResourceUsage 1 } + +rlSysmngResourceUsageEntry OBJECT-TYPE + SYNTAX RlSysmngResourceUsageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Single entry containing specific router resource information." + INDEX { rlSysmngResourceUsageType } + ::= { rlSysmngResourceUsageTable 1 } + +RlSysmngResourceUsageEntry ::= SEQUENCE { + rlSysmngResourceUsageType SysmngResourceRouteUsageType, + rlSysmngResourceUsageNum Unsigned32 +} + +rlSysmngResourceUsageType OBJECT-TYPE + SYNTAX SysmngResourceRouteUsageType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Router resource type." + ::= { rlSysmngResourceUsageEntry 1 } + +rlSysmngResourceUsageNum OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Currently in used." + DEFVAL { 0 } + ::= { rlSysmngResourceUsageEntry 2 } + +rlSysmngResourcePerUnit OBJECT IDENTIFIER + ::= { rlSysmngMib 5 } + +-- This table should be used rlSysmngResourcePerUnitTable instead of +-- rlSysmngResourceTable +rlSysmngResourcePerUnitTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlSysmngResourcePerUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A read-only table for displaying router resources configuration, + properties, and usage per resource." + ::= { rlSysmngResourcePerUnit 1 } + +rlSysmngResourcePerUnitEntry OBJECT-TYPE + SYNTAX RlSysmngResourcePerUnitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Single entry containing specific router resource information." + INDEX { rlSysmngResourcePerUnitRouteType, + rlSysmngResourcePerUnitUnitId } + ::= { rlSysmngResourcePerUnitTable 1 } + +RlSysmngResourcePerUnitEntry ::= SEQUENCE { + rlSysmngResourcePerUnitRouteType SysmngResourceRouteType, + rlSysmngResourcePerUnitUnitId Unsigned32, + rlSysmngResourcePerUnitCurrentUse Unsigned32, + rlSysmngResourcePerUnitCurrentUseHw Unsigned32, + rlSysmngResourcePerUnitCurrentMax Unsigned32, + rlSysmngResourcePerUnitCurrentMaxHw Unsigned32, + rlSysmngResourcePerUnitTemporaryMax Unsigned32, + rlSysmngResourcePerUnitTemporaryMaxHw Unsigned32, + rlSysmngResourcePerUnitCurrentNexthopMax Unsigned32, + rlSysmngResourcePerUnitCurrentNexthopMaxHw Unsigned32, + rlSysmngResourcePerUnitCurrentNexthopUse Unsigned32, + rlSysmngResourcePerUnitCurrentNexthopUseHw Unsigned32 +} + +rlSysmngResourcePerUnitRouteType OBJECT-TYPE + SYNTAX SysmngResourceRouteType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Router resource type." + ::= { rlSysmngResourcePerUnitEntry 1 } + +rlSysmngResourcePerUnitUnitId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unit id. Zero value means system totals." + ::= { rlSysmngResourcePerUnitEntry 2 } + +rlSysmngResourcePerUnitCurrentUse OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Currently in used number of routes." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 3 } + +rlSysmngResourcePerUnitCurrentUseHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Currently in used number of HW FFT entries" + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 4 } + +rlSysmngResourcePerUnitCurrentMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The running maximum supported number of routes." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 5 } + +rlSysmngResourcePerUnitCurrentMaxHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The running maximum supported number of HW FFT entries." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 6 } + +rlSysmngResourcePerUnitTemporaryMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The temporary maximum supported number of routes." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 7 } + +rlSysmngResourcePerUnitTemporaryMaxHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The temporary maximum supported number of HW FFT entries." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 8 } + +rlSysmngResourcePerUnitCurrentNexthopMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum supported number of nexthop entries." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 9 } + +rlSysmngResourcePerUnitCurrentNexthopMaxHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum supported number of HW nexthop entries." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 10 } + +rlSysmngResourcePerUnitCurrentNexthopUse OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of nexthop entries." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 11 } + +rlSysmngResourcePerUnitCurrentNexthopUseHw OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current number of HW nexthop entries." + DEFVAL { 0 } + ::= { rlSysmngResourcePerUnitEntry 12 } + +rlRouterHwReactivate OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Router hardware reactivation action." + DEFVAL { 0 } + ::= { rlSysmngMib 6 } + +rlRouterHwStatus OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + inRecovery(2), + suspended(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Router hardware active state." + DEFVAL { 1 } + ::= { rlSysmngMib 7 } +END |