diff options
Diffstat (limited to 'MIBS/comware/HH3C-FLASH-MAN-MIB')
| -rw-r--r-- | MIBS/comware/HH3C-FLASH-MAN-MIB | 1424 |
1 files changed, 1424 insertions, 0 deletions
diff --git a/MIBS/comware/HH3C-FLASH-MAN-MIB b/MIBS/comware/HH3C-FLASH-MAN-MIB new file mode 100644 index 0000000..5b22f06 --- /dev/null +++ b/MIBS/comware/HH3C-FLASH-MAN-MIB @@ -0,0 +1,1424 @@ +-- ================================================================= +-- Copyright (c) 2004-2015 New H3C Tech. Co., Ltd. All rights reserved. +-- +-- Description: flash management mib +-- Reference: +-- Version: V3.3 +-- History: +-- V1.0 initial version 2002-12-20 +-- V1.1 2004-6-15 add delete(4) to hh3cFlhOperType +-- V1.2 2004-7-15 add some Hh3cFlashOperationStatus types: +-- opAuthFail(17), +-- opTimeout(18), +-- opDeleteFileOpenError(20), +-- opDeleteInvalidDevice(21), +-- opDeleteInvalidFunction(22), +-- opDeleteOperationError(23), +-- opDeleteInvalidFileName(24), +-- opDeleteDeviceBusy(25), +-- opDeleteParaError(26), +-- opDeleteInvalidPath(27) +-- V1.21 2004-8-19 modify the DESCRIPTION of hh3cFlhMinPartitionSize +-- by fanxiaoxun +-- V2.0 2004-10-12 updated by gaolong +-- Fix hh3cFlhMIBCompliance MODULE name to HH3C-FLASH-MAN-MIB +-- V2.1 2004-11-22 modify the SYNTAX of hh3cFlhSupportNum and hh3cFlhIndex +-- by wangpengju +-- V2.2 2005-01-11 updated by gaolong and weixinzhe +-- File description updated +-- V2.3 2005-01-11 add 'rename' operation type for hh3cFlhOperType, +-- by wangpengju +-- V2.4 2005-06-06 add enum value in SYNTAX of hh3cFlhOperProtocol +-- by jinyongfeng. Adjust file format by gaolong +-- V2.5 2005-08-18 change the value range of hh3cFlhFileIndex +-- from (1..32) to (1..2147483647), by wangpengju +-- V2.6 2006-03-03 updated by yangjianfeng +-- correct some error words which are obvious clerical error. +-- V2.7 2009-05-05 Add hh3cFlhOperServerPort by jinyi +-- V2.8 2010-06-05 add hh3cFlhOperFailReason by shuaixiaojuan +-- add hh3cFlhKbyteSize by jinyi +-- V2.9 2010-10-30 Deprecated hh3cFlhOperServerAddress, +-- added enum in Hh3cFlashOperationStatus, +-- added hh3cFlhOperSrvAddrType, hh3cFlhOperSrvAddrRev and +-- hh3cFlhOperSrvVPNName by songhao. +-- V3.0 2011-10-13 Modify syntax of hh3cFlhName and hh3cFlhPartName +-- by shuaixiaojuan. +-- V3.1 2012-06-26 Add hh3cFlhPartBootable and hh3cFlhPartPathForGlobalOpt +-- by lisong. +-- V3.2 2013-05-23 Add hh3cFlhHCSize, hh3cFlhPartHCSpace, +-- hh3cFlhPartHCSpaceFree and hh3cFlhFileHCSize to replace +-- hh3cFlhSize, hh3cFlhPartSpace, hh3cFlhPartSpaceFree +-- and hh3cFlhFileSize by lisong. +-- V3.3 2014-08-11 Added mkdir(6), rmdir(7) to hh3cFlhOperType, added hh3cFlhFileType +-- to hh3cFlhFileEntry, modified description of +-- hh3cFlhFileName, hh3cFlhOperProtocol, hh3cFlhOperSourceFile +-- and Hh3cFlashOperationStatus to support directory operation +-- by SongHao. +-- 2015-01-20 Added copy(8) to hh3cFlhOperType by SongHao. +-- ================================================================= +HH3C-FLASH-MAN-MIB DEFINITIONS ::= BEGIN + +IMPORTS + PhysicalIndex + FROM ENTITY-MIB + hh3cCommon + FROM HH3C-OID-MIB + OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP + FROM SNMPv2-CONF + TimeTicks, IpAddress, Integer32, Gauge32, Counter32, + OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE + FROM SNMPv2-SMI + InetAddressType, InetAddress + FROM INET-ADDRESS-MIB + DisplayString, TimeStamp, TruthValue, RowStatus, TEXTUAL-CONVENTION + FROM SNMPv2-TC + CounterBasedGauge64 + FROM HCNUM-TC; + + +hh3cFlash MODULE-IDENTITY + LAST-UPDATED "201501200808Z" + ORGANIZATION + "New H3C Technologies Co., Ltd." + CONTACT-INFO + "Platform Team New H3C Technologies Co., Ltd. + Hai-Dian District Beijing P.R. China + http://www.h3c.com + Zip:100085" + DESCRIPTION + "This MIB contains objects to manage flash cards and flash + card operations. + There are no constraints on this MIB." + REVISION "201501200808Z" + DESCRIPTION + "Added copy(8) to hh3cFlhOperType." + REVISION "201408110303Z" + DESCRIPTION + "Added mkdir(6), rmdir(7) to hh3cFlhOperType, added hh3cFlhFileType + to hh3cFlhFileEntry, modified description of + hh3cFlhFileName, hh3cFlhOperProtocol, hh3cFlhOperSourceFile + and Hh3cFlashOperationStatus to support directory operation." + REVISION "201305230000Z" + DESCRIPTION + "Add hh3cFlhHCSize, hh3cFlhPartHCSpace, hh3cFlhPartHCSpaceFree and + hh3cFlhFileHCSize to replace hh3cFlhSize, hh3cFlhPartSpace, + hh3cFlhPartSpaceFree and hh3cFlhFileSize." + REVISION "201206260000Z" + DESCRIPTION + "Add hh3cFlhPartBootable and hh3cFlhPartPathForGlobalOpt." + REVISION "201110130000Z" + DESCRIPTION + "Modify syntax of hh3cFlhName and hh3cFlhPartName." + REVISION "201010300000Z" + DESCRIPTION + "Deprecated hh3cFlhOperServerAddress, added enum in + Hh3cFlashOperationStatus, added hh3cFlhOperSrvAddrType, + hh3cFlhOperSrvAddrRev and hh3cFlhOperSrvVPNName." + REVISION "201006050000Z" + DESCRIPTION + "Add hh3cFlhOperFailReason and hh3cFlhKbyteSize." + REVISION "200905050000Z" + DESCRIPTION + "Add hh3cFlhOperServerPort." + REVISION "200603030000Z" + DESCRIPTION + "Correct some error words which are obvious clerical error." + REVISION "200508180000Z" + DESCRIPTION + "Change the value range of hh3cFlhFileIndex from (1..32) + to (1..2147483647)." + REVISION "200506060000Z" + DESCRIPTION + "Add enum value in SYNTAX of hh3cFlhOperProtocol. + Adjust file format." + REVISION "200501110800Z" + DESCRIPTION + "Add 'rename' operation type for hh3cFlhOperType." + REVISION "200501110000Z" + DESCRIPTION + "File description updated." + REVISION "200411220000Z" + DESCRIPTION + "Modify the SYNTAX of hh3cFlhSupportNum and hh3cFlhIndex." + REVISION "200410120000Z" + DESCRIPTION + "Fix hh3cFlhMIBCompliance MODULE name to HH3C-FLASH-MAN-MIB." + REVISION "200408190000Z" + DESCRIPTION + "Modify the DESCRIPTION of hh3cFlhMinPartitionSize." + REVISION "200407150000Z" + DESCRIPTION + "Add some Hh3cFlashOperationStatus types: + opAuthFail(17), + opTimeout(18), + opDeleteFileOpenError(20), + opDeleteInvalidDevice(21), + opDeleteInvalidFunction(22), + opDeleteOperationError(23), + opDeleteInvalidFileName(24), + opDeleteDeviceBusy(25), + opDeleteParaError(26), + opDeleteInvalidPath(27)" + REVISION "200406150000Z" + DESCRIPTION + "add delete(4) to hh3cFlhOperType." + REVISION "200212200000Z" + DESCRIPTION + "Initial version." + ::= { hh3cCommon 5 } + + +-- +-- Textual conventions +-- + +Hh3cFlashOperationStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The status of the specified operation can be one of + the following. + + opInProgress : The operation is in process. + opSuccess : The operation has been completed successfully. + opInvalid : The command is invalid or command-protocol-device + combination is unsupported by the system. + opInvalidProtocol : Invalid protocol is specified. + opInvalidSourceName : Invalid source name is specified. + opInvalidDestName : Invalid target name is specified. + opInvalidServerAddress : Invalid server address is specified. + opDeviceBusy : The device is in use and locked by another process. + opDeviceOpenError : Invalid device name is specified. + opDeviceError : Device read, write or erase error. + opDeviceNotProgrammable : Device is read-only but a write or + erase operation was specified. + opDeviceFull : Device is filled to capacity. + opFileOpenError : Invalid file/directory name, + file/directory not found in partition. + opFileTransferError : File transfer was unsuccessful. + opFileChecksumError : File checksum in Flash is invalid. + opNoMemory : System is running in low on memory. + opUnknownFailure : Failure which is unknown. + opDeleteFileOpenError : File/Directory is in used by another process. + opDeleteInvalidDevice : Invalid device name is specified. + opDeleteInvalidFunction : Deleted operation is unsupported + by the device. + opDeleteOperationError : Operation is in a low error. + opDeleteInvalidFileName : Invalid name is specified. + opDeleteDeviceBusy : The device is in use and locked + by another process. + opDeleteParaError : The parameters are invalid. + opDeleteInvalidPath : The path is invalid. + opDeleteFileNotExistInSlave : Failed to delete file, because the file + does not exist in the slave. + opDeleteFileFailedInSlave : Operation failed when deleting file in the slave. + opSlaveFull : Operation failed because the slave doesn't have enough space. + opCopyToSlaveFailure : Operation failed when copying file to the slave. + " + SYNTAX INTEGER + { + opInProgress(1), + opSuccess(2), + opInvalid(3), + opInvalidProtocol(4), + opInvalidSourceName(5), + opInvalidDestName(6), + opInvalidServerAddress(7), + opDeviceBusy(8), + opDeviceOpenError(9), + opDeviceError(10), + opDeviceNotProgrammable(11), + opDeviceFull(12), + opFileOpenError(13), + opFileTransferError(14), + opFileChecksumError(15), + opNoMemory(16), + opAuthFail(17), + opTimeout(18), + opUnknownFailure(19), + opDeleteFileOpenError(20), + opDeleteInvalidDevice(21), + opDeleteInvalidFunction(22), + opDeleteOperationError(23), + opDeleteInvalidFileName(24), + opDeleteDeviceBusy(25), + opDeleteParaError(26), + opDeleteInvalidPath(27), + opDeleteFileNotExistInSlave(28), + opDeleteFileFailedInSlave(29), + opSlaveFull(30), + opCopyToSlaveFailure(31) + } + +Hh3cFlashPartitionUpgradeMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + " + Flash partition upgrade method, i.e., method by which + new files can be downloaded into the partition. + FLH stands for Flash Load Helper, a feature provided + on run-from-Flash systems for upgrading Flash. This + feature uses the bootstrap code in ROMs to help in + automatic download. + This object should be retrieved if the partition + status is runFromFlash(2). + If the partition status is readOnly(1), the upgrade + method would depend on the reason for the readOnly + status. For example, it may simply be a matter of installing + the programming jumper, or it may require execution of a + later version of software that supports the Flash chips. + + unknown - the current system image does not know + how Flash can be programmed. A possible + method would be to reload the ROM image + and perform the upgrade manually. + rxbootFLH - the Flash Load Helper is available to + download files to Flash. A copy-to-flash + command can be used and this system image + will automatically reload the Rxboot image + in ROM and direct it to carry out the + download request. + direct - will be done directly by this image. + " + SYNTAX INTEGER + { + unknown(1), + rxbootFLH(2), + direct(3) + } + +Hh3cFlashPartitionStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "If device is not programmable the value of it will be + 'readOnly'; If the current image is running from + this partition the value of it will be 'runFromFlash' + If device is programmable the value of it will be 'readWrite'. + " + SYNTAX INTEGER + { + readOnly(1), + runFromFlash(2), + readWrite(3) + } + + +-- +-- Node definitions +-- +hh3cFlashManMIBObjects OBJECT IDENTIFIER ::= { hh3cFlash 1 } + + +-- The flash device information. +hh3cFlashDevice OBJECT IDENTIFIER ::= { hh3cFlashManMIBObjects 1 } + + +hh3cFlhSupportNum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Specifies the total number of flash which the + system supported. + + The MIB should not be loaded if there is no flash + in the system and so the value here will be a + minimum of 1. + " + ::= { hh3cFlashDevice 1 } + + +hh3cFlashTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cFlashEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + This table gives the properties of all the flashes on + the system. + " + ::= { hh3cFlashDevice 2 } + + +hh3cFlashEntry OBJECT-TYPE + SYNTAX Hh3cFlashEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of hh3cFlashTable." + INDEX { hh3cFlhIndex } + ::= { hh3cFlashTable 1 } + + +Hh3cFlashEntry ::= + SEQUENCE { + hh3cFlhIndex Integer32, + hh3cFlhSize Integer32, + hh3cFlhPos PhysicalIndex, + hh3cFlhName DisplayString, + hh3cFlhChipNum Integer32, + hh3cFlhDescr DisplayString, + hh3cFlhInitTime TimeStamp, + hh3cFlhRemovable TruthValue, + hh3cFlhPartitionBool TruthValue, + hh3cFlhMinPartitionSize Integer32, + hh3cFlhMaxPartitions Integer32, + hh3cFlhPartitionNum Integer32, + hh3cFlhKbyteSize Integer32, + hh3cFlhHCSize CounterBasedGauge64 + } + +hh3cFlhIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The index of hh3cFlashTable. There are two parts for this index + depicted as follows: + 31 15 0 + +++++++++++++++++++++++++++++++++++++++++ + + entity index + random index + + + ( bit 16..31 ) ( bit 0..15 ) + + +++++++++++++++++++++++++++++++++++++++++ + + From bit0 to bit15 (two bytes), it has a minimum value of 1, and + maximum value of the same as the value of hh3cFlhSupportNum. + + From bit16 to bit31 (two bytes), it is the physical index the same as the + entPhysicalIndex specified in ENTITY-MIB. + " + ::= { hh3cFlashEntry 1 } + + +hh3cFlhSize OBJECT-TYPE + SYNTAX Integer32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + Specifies the total size of the flash indexed by hh3cFlhIndex. + The value should be zero if the flash is removed for a removable + device. + If the total size of the flash exceeds 2,147,483,647 bytes, + hh3cFlhHCSize specifies the actual size. + " + ::= { hh3cFlashEntry 2 } + + +hh3cFlhPos OBJECT-TYPE + SYNTAX PhysicalIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The position of the flash device in system. This object is + an index of entPhysicalTable in ENTITY-MIB. + If the value of this object is 0, + the main processor is indicated. + " + ::= { hh3cFlashEntry 3 } + + +hh3cFlhName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The flash name within the system." + ::= { hh3cFlashEntry 4 } + + +hh3cFlhChipNum OBJECT-TYPE + SYNTAX Integer32 (1..64) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The chip numbers in the flash." + ::= { hh3cFlashEntry 5 } + + +hh3cFlhDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description of the purpose of the flash in the system." + ::= { hh3cFlashEntry 6 } + + +hh3cFlhInitTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The initialization time for the flash component or partition, + recorded using the system time. This will be the boot time for + a fixed device. For a removable component or a partition, + it will be the initialization time. + " + ::= { hh3cFlashEntry 8 } + + +hh3cFlhRemovable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The value indicates whether the flash indexed can be removed + or not. + The true(1) value indicates the flash device CAN be removed. + " + ::= { hh3cFlashEntry 9 } + + +hh3cFlhPartitionBool OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " + The value indicates whether the flash indexed can be partitioned + or not. + The true(1) value indicates the flash CAN be partitioned. + " + ::= { hh3cFlashEntry 11 } + + +hh3cFlhMinPartitionSize OBJECT-TYPE + SYNTAX Integer32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Minimum partition size supported. + If hh3cFlhDevicePartitionBool is false, the value + of this object is the same as hh3cFlhSize. + " + ::= { hh3cFlashEntry 12 } + + +hh3cFlhMaxPartitions OBJECT-TYPE + SYNTAX Integer32 (1..8) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The maximum count of partitions which the system supports + for this flash. If hh3cFlhPartitionBool is false, + the object value is 1. + " + ::= { hh3cFlashEntry 13 } + + +hh3cFlhPartitionNum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The actual number of partitions supported by the system for + this flash. If hh3cFlhPartitionBool is false, this value is 1. + " + ::= { hh3cFlashEntry 14 } + +hh3cFlhKbyteSize OBJECT-TYPE + SYNTAX Integer32 + UNITS "kbytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Specifies the total size of the flash device indexed + by hh3cFlhIndex. The value should be zero if the flash is + removed for a removable device. + " + ::= { hh3cFlashEntry 15 } + +hh3cFlhHCSize OBJECT-TYPE + SYNTAX CounterBasedGauge64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Specifies the total size of the flash indexed by hh3cFlhIndex. + This node is a 64-bit substitute for hh3cFlhSize. + " + ::= { hh3cFlashEntry 16 } + +hh3cFlashChips OBJECT IDENTIFIER ::= { hh3cFlashDevice 3 } + + +hh3cFlhChipTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cFlhChipEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Table of properties for all flash chips. + Used mainly for diagnostics. + " + ::= { hh3cFlashChips 1 } + + +hh3cFlhChipEntry OBJECT-TYPE + SYNTAX Hh3cFlhChipEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The entry of hh3cFlhChipTable" + INDEX { hh3cFlhIndex, hh3cFlhChipSerialNo } + ::= { hh3cFlhChipTable 1 } + + +Hh3cFlhChipEntry ::= + SEQUENCE { + hh3cFlhChipSerialNo Integer32, + hh3cFlhChipID DisplayString, + hh3cFlhChipDescr DisplayString, + hh3cFlhChipWriteTimesLimit Integer32, + hh3cFlhChipWriteTimes Counter32, + hh3cFlhChipEraseTimesLimit Integer32, + hh3cFlhChipEraseTimes Counter32 + } + +hh3cFlhChipSerialNo OBJECT-TYPE + SYNTAX Integer32 (1..64) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index of hh3cFlhChipTable." + ::= { hh3cFlhChipEntry 1 } + + +hh3cFlhChipID OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..5)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The manufacturer code (the upper byte) and + device code (the lower byte) for a chip. + Unknown chip code is presented as 00:00. + " + ::= { hh3cFlhChipEntry 2 } + + +hh3cFlhChipDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The description of the flash chip. + " + ::= { hh3cFlhChipEntry 3 } + + +hh3cFlhChipWriteTimesLimit OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The limit for the number of write times (retries) + for a flash chip. If the limit + is exceeded an error should be reported by the management + station. + " + ::= { hh3cFlhChipEntry 4 } + + +hh3cFlhChipWriteTimes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + A count of write times (retries) for the flash chip since + initialization. + A count of 25 or more for a single chip indicates a write error. + Management stations should note the value of this MIB before and + after a write operation, + and report any errors accordingly. + " + ::= { hh3cFlhChipEntry 5 } + + +hh3cFlhChipEraseTimesLimit OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The limit for the number of erase times (retries) for a flash + chip. + If the limit is exceeded an error should be reported by the + management station. + " + ::= { hh3cFlhChipEntry 6 } + + +hh3cFlhChipEraseTimes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + A count of erase times (retries) for the flash chip since + initialization. + A count of 2000 or more for a single chip indicates a write + error. + Management stations should note the value of this MIB before and + after an erase operation, and report any errors accordingly. + " + ::= { hh3cFlhChipEntry 7 } + + +hh3cFlashPartitions OBJECT IDENTIFIER ::= { hh3cFlashDevice 4 } + + +hh3cFlhPartitionTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cFlhPartitionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Properties for the flash partitions. Minimum of one entry in + this table. + " + ::= { hh3cFlashPartitions 1 } + + +hh3cFlhPartitionEntry OBJECT-TYPE + SYNTAX Hh3cFlhPartitionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + An entry of the hh3cFlhPartitionTable.Indexed by flash + number and partition number. + " + INDEX { hh3cFlhIndex, hh3cFlhPartIndex } + ::= { hh3cFlhPartitionTable 1 } + + +Hh3cFlhPartitionEntry ::= +SEQUENCE { + hh3cFlhPartIndex Integer32, + hh3cFlhPartFirstChip Integer32, + hh3cFlhPartLastChip Integer32, + hh3cFlhPartSpace Integer32, + hh3cFlhPartSpaceFree Gauge32, + hh3cFlhPartFileNum Integer32, + hh3cFlhPartChecksumMethod INTEGER, + hh3cFlhPartStatus Hh3cFlashPartitionStatus, + hh3cFlhPartUpgradeMode Hh3cFlashPartitionUpgradeMode, + hh3cFlhPartName DisplayString, + hh3cFlhPartRequireErase TruthValue, + hh3cFlhPartFileNameLen Integer32, + hh3cFlhPartBootable TruthValue, + hh3cFlhPartPathForGlobalOpt TruthValue, + hh3cFlhPartHCSpace CounterBasedGauge64, + hh3cFlhPartHCSpaceFree CounterBasedGauge64 + } + +hh3cFlhPartIndex OBJECT-TYPE + SYNTAX Integer32 (1..8) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + An index which specifies a sequenced partition in the system. + " + ::= { hh3cFlhPartitionEntry 1 } + + +hh3cFlhPartFirstChip OBJECT-TYPE + SYNTAX Integer32 (1..64) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The first chip's sequence number in the + partition, by which a chip can be indexed in + chip table. + " + ::= { hh3cFlhPartitionEntry 2 } + + +hh3cFlhPartLastChip OBJECT-TYPE + SYNTAX Integer32 (1..64) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The last chip's sequence number in the + partition, by which a chip can be indexed in + chip table. + " + ::= { hh3cFlhPartitionEntry 3 } + + +hh3cFlhPartSpace OBJECT-TYPE + SYNTAX Integer32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The total space of the flash partition. + The following should be satisfied: + hh3cFlhPartSpace = n*hh3cFlhMinPartitionSize + If the total size of the flash partition exceeds 2,147,483,647 bytes, + hh3cFlhPartHCSpace specifies the actual size. + " + ::= { hh3cFlhPartitionEntry 4 } + + +hh3cFlhPartSpaceFree OBJECT-TYPE + SYNTAX Gauge32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The flash partition's free space. + If the free space of the flash partition exceeds 2,147,483,647 bytes, + hh3cFlhPartHCSpaceFree specifies the actual free space. + " + ::= { hh3cFlhPartitionEntry 5 } + + +hh3cFlhPartFileNum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of all the files in the flash partition." + ::= { hh3cFlhPartitionEntry 6 } + + +hh3cFlhPartChecksumMethod OBJECT-TYPE + SYNTAX INTEGER + { + simpleChecksum(1), + undefined(2), + simpleCRC(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Checksum method which the file system uses." + ::= { hh3cFlhPartitionEntry 7 } + + +hh3cFlhPartStatus OBJECT-TYPE + SYNTAX Hh3cFlashPartitionStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The flash partition status." + ::= { hh3cFlhPartitionEntry 8 } + + +hh3cFlhPartUpgradeMode OBJECT-TYPE + SYNTAX Hh3cFlashPartitionUpgradeMode + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The upgrade mode of the Flash partition" + ::= { hh3cFlhPartitionEntry 9 } + + +hh3cFlhPartName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the flash partition given by the system." + ::= { hh3cFlhPartitionEntry 10 } + + +hh3cFlhPartRequireErase OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + Shows whether a write operation is conditional on partition + erase. + " + ::= { hh3cFlhPartitionEntry 11 } + + +hh3cFlhPartFileNameLen OBJECT-TYPE + SYNTAX Integer32 (1..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum length of file name supported in the system." + ::= { hh3cFlhPartitionEntry 12 } + +hh3cFlhPartBootable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value indicates whether the partition is a bootable partition. + The true(1) value indicates a bootable partition. + " + ::= { hh3cFlhPartitionEntry 13 } + +hh3cFlhPartPathForGlobalOpt OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value indicates whether the partition is used in a global file + operation. The true(1) value indicates that in one global file + operation files will be copied to or deleted from this partition. + When hh3cFlhPartPathForGlobalOpt in one entry is set to true(1), + hh3cFlhPartPathForGlobalOpt in other entries with the same entity + index will be set to false(0). + " + ::= { hh3cFlhPartitionEntry 14 } + +hh3cFlhPartHCSpace OBJECT-TYPE + SYNTAX CounterBasedGauge64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The total space of the flash partition. + This node is a 64-bit substitute for hh3cFlhPartSpace. + " + ::= { hh3cFlhPartitionEntry 15 } + + +hh3cFlhPartHCSpaceFree OBJECT-TYPE + SYNTAX CounterBasedGauge64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The flash partition's free space. + This node is a 64-bit substitue for hh3cFlhPartSpace. + " + ::= { hh3cFlhPartitionEntry 16 } + + + +hh3cFlhFiles OBJECT IDENTIFIER ::= { hh3cFlashPartitions 2 } + + +hh3cFlhFileTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cFlhFileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of file information." + ::= { hh3cFlhFiles 1 } + + +hh3cFlhFileEntry OBJECT-TYPE + SYNTAX Hh3cFlhFileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + An entry representing a file. Indexed using flash number, + partition number, and file number. + " + INDEX { hh3cFlhIndex, hh3cFlhPartIndex, hh3cFlhFileIndex } + ::= { hh3cFlhFileTable 1 } + + +Hh3cFlhFileEntry ::= + SEQUENCE { + hh3cFlhFileIndex Integer32, + hh3cFlhFileName DisplayString, + hh3cFlhFileSize Integer32, + hh3cFlhFileStatus INTEGER, + hh3cFlhFileChecksum OCTET STRING, + hh3cFlhFileHCSize CounterBasedGauge64, + hh3cFlhFileType INTEGER + } + +hh3cFlhFileIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index of the table, whose range is from 1 to 2147483647" + ::= { hh3cFlhFileEntry 1 } + + +hh3cFlhFileName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A valid file/directory name supported by the file system." + ::= { hh3cFlhFileEntry 2 } + + +hh3cFlhFileSize OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + " + The file size in bytes excluding the file + header of file system. The value should be greater than zero. + If the file size exceeds 2,147,483,647 bytes, hh3cFlhFileHCSize + specifies the actual size. + " + ::= { hh3cFlhFileEntry 3 } + + +hh3cFlhFileStatus OBJECT-TYPE + SYNTAX INTEGER + { + deleted(1), + invalidChecksum(2), + valid(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The status should be as follows: + deleted(1): The file is in recycle bin. + invalidChecksum(2): The checksum of file is invalid; + valid(3): A valid file. + " + ::= { hh3cFlhFileEntry 4 } + + +hh3cFlhFileChecksum OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The file checksum in the header of file." + ::= { hh3cFlhFileEntry 5 } + + +hh3cFlhFileHCSize OBJECT-TYPE + SYNTAX CounterBasedGauge64 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " + The file size in bytes. + This node is a 64-bit substitue for hh3cFlhFileSize. + " + ::= { hh3cFlhFileEntry 6 } + +hh3cFlhFileType OBJECT-TYPE + SYNTAX INTEGER + { + file(1), + directory(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates whether it is a file or directory." + ::= { hh3cFlhFileEntry 7 } + + +-- The operation on the flash. +hh3cFlashOperate OBJECT IDENTIFIER ::= { hh3cFlashManMIBObjects 2 } + + +hh3cFlhOpTable OBJECT-TYPE + SYNTAX SEQUENCE OF Hh3cFlhOpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table used to operate flash." + ::= { hh3cFlashOperate 1 } + + +hh3cFlhOpEntry OBJECT-TYPE + SYNTAX Hh3cFlhOpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Note an operation cannot be stopped until it is finished. + + If notification is configured, NMS will receive a notification + at the end of the operation. + + Entries in the table will be removed automatically in 5 minutes. + It can also be deleted by NMS directly. + " + INDEX { hh3cFlhOperIndex } + ::= { hh3cFlhOpTable 1 } + + +Hh3cFlhOpEntry ::= + SEQUENCE { + hh3cFlhOperIndex Integer32, + hh3cFlhOperType INTEGER, + hh3cFlhOperProtocol INTEGER, + hh3cFlhOperServerAddress IpAddress, + hh3cFlhOperServerUser DisplayString, + hh3cFlhOperPassword DisplayString, + hh3cFlhOperSourceFile DisplayString, + hh3cFlhOperDestinationFile DisplayString, + hh3cFlhOperStatus Hh3cFlashOperationStatus, + hh3cFlhOperEndNotification TruthValue, + hh3cFlhOperProgress TimeTicks, + hh3cFlhOperRowStatus RowStatus, + hh3cFlhOperServerPort Integer32, + hh3cFlhOperFailReason DisplayString, + hh3cFlhOperSrvAddrType InetAddressType, + hh3cFlhOperSrvAddrRev InetAddress, + hh3cFlhOperSrvVPNName DisplayString + } + +hh3cFlhOperIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " + Specifies the index of an entry. It is a + random value when creating an entry. + " + ::= { hh3cFlhOpEntry 1 } + + +hh3cFlhOperType OBJECT-TYPE + SYNTAX INTEGER + { + net2FlashWithErase(1), + net2FlashWithoutErase(2), + flash2Net(3), + delete(4), + rename(5), + mkdir(6), + rmdir(7), + copy(8) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " + Specifies the operation to be executed. + + net2FlashWithErase Copy a file to flash; erase flash beforehand. + net2FlashWithoutErase Copy a file to flash; do not erase flash + beforehand. + flash2Net Copy a file from flash. + delete Delete a file that is specified by + hh3cFlhOperSourceFile. + rename Change a file's name. + mkdir Create a directory that is specified by + hh3cFlhOperSourceFile. + rmdir Delete a directory that is specified by + hh3cFlhOperSourceFile. + copy Copy a file. + " + ::= { hh3cFlhOpEntry 2 } + + +hh3cFlhOperProtocol OBJECT-TYPE + SYNTAX INTEGER + { + ftp(1), + tftp(2), + clusterftp(3), + clustertftp(4), + sftp(5) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " + Specifies the protocol used to transfer a file. + The default protocol is ftp. + + A directory cannot be transferred. + + when 'clusterftp' or 'clustertftp' is selected, + the hh3cFlhOperServerAddress needn't be set, + the server address can be acquired automatically, the value of + hh3cFlhOperServerAddress is uncertain during operation. + Both member switch and commander switch can use them if they + support HGMP v2. + " + DEFVAL { ftp } + ::= { hh3cFlhOpEntry 3 } + + +hh3cFlhOperServerAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + " + The address of remote host acting as server for operation. + + The default value is 255.255.255.255 + + This object is replaced by hh3cFlhOperSrvAddrRev for it only support IPv4. + " + DEFVAL { 'FFFFFFFF'h } + ::= { hh3cFlhOpEntry 4 } + + +hh3cFlhOperServerUser OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " + When using ftp to transfer files, the user name must be + specified through this node. + " + ::= { hh3cFlhOpEntry 5 } + + +hh3cFlhOperPassword OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " + Remote user password for copying via ftp protocol. Optionally, + This object may be ignored for protocols other than ftp. " + ::= { hh3cFlhOpEntry 6 } + + +hh3cFlhOperSourceFile OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..255)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " + Specifies the source file/directory name for this operation + that is specified by hh3cFlhOperType. + + It may be located on flash or remote server. + It may include the file path if it is applicable. + It must be specified. + " + ::= { hh3cFlhOpEntry 7 } + + +hh3cFlhOperDestinationFile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " + Specifies the destination file name. + It may be located on flash or remote server. + It may include the file path if it is applicable. + If it is not specified, the destination file name + is the same as source file name for application. + " + ::= { hh3cFlhOpEntry 8 } + + +hh3cFlhOperStatus OBJECT-TYPE + SYNTAX Hh3cFlashOperationStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of operation." + ::= { hh3cFlhOpEntry 9 } + + +hh3cFlhOperEndNotification OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " + If the value of it is specified 'true', a notification + will be generated at the end of the operation. + Else no notification will be generated. + " + DEFVAL { false } + ::= { hh3cFlhOpEntry 10 } + + +hh3cFlhOperProgress OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The progress described as the time taken for the operation. + " + ::= { hh3cFlhOpEntry 11 } + + +hh3cFlhOperRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status of this table entry." + ::= { hh3cFlhOpEntry 12 } + +hh3cFlhOperServerPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The port of remote host acting as server for operation. + If the value of this object is not specified, the server + port is the known protocol port." + ::= { hh3cFlhOpEntry 13 } + +hh3cFlhOperFailReason OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The failure reasons of operation." + ::= { hh3cFlhOpEntry 14 } + +hh3cFlhOperSrvAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of IP address for hh3cFlhOperSrvAddrRev." + ::= { hh3cFlhOpEntry 15 } + +hh3cFlhOperSrvAddrRev OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The address of remote host acting as server for operation." + ::= { hh3cFlhOpEntry 16 } + +hh3cFlhOperSrvVPNName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The VPN instance of this operation uses." + ::= { hh3cFlhOpEntry 17 } + +hh3cFlashNotification OBJECT IDENTIFIER ::= { hh3cFlashManMIBObjects 3 } + + +hh3cFlhOperNotification NOTIFICATION-TYPE + OBJECTS { hh3cFlhOperStatus } + STATUS current + DESCRIPTION + " + A hh3cFlhOperNotification is sent at the completion of a flash + copy operation if hh3cFlhOperEndNotification is true. + " + ::= { hh3cFlashNotification 1 } + + +hh3cFlashMIBConformance OBJECT IDENTIFIER ::= { hh3cFlash 2 } + + +hh3cFlhMIBCompliances OBJECT IDENTIFIER ::= { hh3cFlashMIBConformance 1 } + + +hh3cFlhMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + " + The statement of compliance for those implementing this MIB. + " + MODULE HH3C-FLASH-MAN-MIB + MANDATORY-GROUPS { hh3cFlhGroup, hh3cFlhPartitionGroup, + hh3cFlhFileGroup, hh3cFlhOperationGroup, hh3cFlhNotificationGroup + } + GROUP hh3cFlhChipGroup + DESCRIPTION + " " + ::= { hh3cFlhMIBCompliances 1 } + + +hh3cFlashMIBGroups OBJECT IDENTIFIER ::= { hh3cFlashMIBConformance 2 } + + +hh3cFlhGroup OBJECT-GROUP + OBJECTS { hh3cFlhSupportNum, hh3cFlhSize, hh3cFlhPos, hh3cFlhName, + hh3cFlhChipNum, hh3cFlhDescr, hh3cFlhInitTime, hh3cFlhRemovable, + hh3cFlhPartitionBool, hh3cFlhMinPartitionSize, + hh3cFlhMaxPartitions, hh3cFlhPartitionNum, hh3cFlhIndex, hh3cFlhKbyteSize } + STATUS current + DESCRIPTION + "A collection of objects on Flash level information." + ::= { hh3cFlashMIBGroups 1 } + + +hh3cFlhChipGroup OBJECT-GROUP + OBJECTS { hh3cFlhChipID, hh3cFlhChipDescr, hh3cFlhChipWriteTimesLimit, + hh3cFlhChipWriteTimes, hh3cFlhChipEraseTimesLimit, + hh3cFlhChipEraseTimes } + STATUS current + DESCRIPTION + "A collection of objects on chip level information." + ::= { hh3cFlashMIBGroups 3 } + + +hh3cFlhPartitionGroup OBJECT-GROUP + OBJECTS { hh3cFlhPartFirstChip, hh3cFlhPartLastChip, hh3cFlhPartSpace, + hh3cFlhPartSpaceFree, hh3cFlhPartFileNum, + hh3cFlhPartChecksumMethod, hh3cFlhPartStatus, + hh3cFlhPartUpgradeMode, hh3cFlhPartName, hh3cFlhPartRequireErase, + hh3cFlhPartFileNameLen, hh3cFlhPartBootable, + hh3cFlhPartPathForGlobalOpt} + STATUS current + DESCRIPTION + "A collection of objects providing on partition + level information." + ::= { hh3cFlashMIBGroups 4 } + + +hh3cFlhFileGroup OBJECT-GROUP + OBJECTS { hh3cFlhFileName, hh3cFlhFileSize, hh3cFlhFileStatus, + hh3cFlhFileChecksum } + STATUS current + DESCRIPTION + "A collection of objects on file level information." + ::= { hh3cFlashMIBGroups 5 } + + +hh3cFlhOperationGroup OBJECT-GROUP + OBJECTS { hh3cFlhOperType, hh3cFlhOperProtocol, + hh3cFlhOperServerAddress, hh3cFlhOperServerUser, + hh3cFlhOperPassword, hh3cFlhOperSourceFile, + hh3cFlhOperDestinationFile, hh3cFlhOperStatus, + hh3cFlhOperEndNotification, hh3cFlhOperProgress, + hh3cFlhOperRowStatus, hh3cFlhOperServerPort, + hh3cFlhOperFailReason } + STATUS current + DESCRIPTION + "A collection of objects of flash operations." + ::= { hh3cFlashMIBGroups 6 } + + +hh3cFlhNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { hh3cFlhOperNotification } + STATUS current + DESCRIPTION + "The collection of notifications in the module" + ::= { hh3cFlashMIBGroups 7 } + +END |