diff options
Diffstat (limited to 'MIBS/ctm/CTMMIBV2')
| -rw-r--r-- | MIBS/ctm/CTMMIBV2 | 445 |
1 files changed, 445 insertions, 0 deletions
diff --git a/MIBS/ctm/CTMMIBV2 b/MIBS/ctm/CTMMIBV2 new file mode 100644 index 0000000..74bc6e8 --- /dev/null +++ b/MIBS/ctm/CTMMIBV2 @@ -0,0 +1,445 @@ +--Last Mile Gear CTM Master MIB
+
+
+
+CTMMIB DEFINITIONS ::= BEGIN
+ IMPORTS
+ enterprises
+ FROM RFC1155-SMI
+ OBJECT-TYPE
+ FROM RFC-1212
+ TRAP-TYPE
+ FROM RFC-1215;
+
+
+ lastmilegear OBJECT IDENTIFIER ::= { enterprises 25868 }
+
+ mibObjects OBJECT IDENTIFIER ::= { lastmilegear 1 }
+
+ version OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Version of Web GUI - Version of Web GUI Interface
+ currently running on CTM"
+ ::= { mibObjects 1 }
+
+ site OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Site Name - Site name as stored on CTM"
+ ::= { mibObjects 2 }
+
+ lastIP OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Last IP Address Login - Last IP address captured
+ at Login Attempt"
+ ::= { mibObjects 3 }
+
+ lastTime OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Last Time Login - Last time of Login attempt"
+ ::= { mibObjects 4 }
+
+ nSats OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Number Satellites in View - Number of Satellites
+ in view of GPS Receiver Antenna being used for
+ timing calculations"
+ ::= { mibObjects 5 }
+
+ pwrP OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Primary Power - Master ?1? = Power OK,
+ ?0? = Power Off or Low"
+ ::= { mibObjects 6 }
+
+ pwrS OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Secondary Power - Master ?1? = Power OK,
+ ?0? = Power Off or Low"
+ ::= { mibObjects 7 }
+
+ cbTrip OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Circuit Breaker Trip Bit Code - Master
+ Breaker Tripped Code: 1=Port 1, 2=Port2, 4=Port
+ 3, 8=Port4, 16=Port5, 32=Port6, 64=Port7, 128=Port8
+ Example: Code 5 means Port 3 and Port 1 Tripped"
+ ::= { mibObjects 8 }
+
+ tempC OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Temperature"
+ ::= { mibObjects 9 }
+
+ voltsM1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Primary Power In Voltage - In Tenths of
+ a Volt"
+ ::= { mibObjects 10 }
+
+ voltsM2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Secondary Power In Voltage - In Tenths
+ of a Volt"
+ ::= { mibObjects 11 }
+
+ portOnM OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ports ON Enabled Status - Master ?1? =Sync
+ Enabled, ?0? = Sync Off listed in order ?Port1?,
+ ?Port2?, ?Port3?, ?Port4?, ?Port5?, ?Port6?,
+ ?Port7?, ?Port8?"
+ ::= { mibObjects 12 }
+
+ portSyncM OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ports Sync Enabled Status - Master ?1?
+ =Sync Enabled, ?0? = Sync Off listed in order
+ ?Port1?, ?Port2?, ?Port3?, ?Port4?, ?Port5?,
+ ?Port6?, ?Port7?, ?Port8?"
+ ::= { mibObjects 13 }
+
+ portPwrM1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Power Port 1 - (in tenths of a Watt) delivered
+ on Port 1"
+ ::= { mibObjects 14 }
+
+ portPwrM2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Power Port 2 - (in tenths of a Watt) delivered
+ on Port 2"
+ ::= { mibObjects 15 }
+
+ portPwrM3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Power Port 3 - (in tenths of a Watt) delivered
+ on Port 3"
+ ::= { mibObjects 16 }
+
+ portPwrM4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Power Port 4 - (in tenths of a Watt) delivered
+ on Port 4"
+ ::= { mibObjects 17 }
+
+ portPwrM5 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Power Port 5 - (in tenths of a Watt) delivered
+ on Port 5"
+ ::= { mibObjects 18 }
+
+ portPwrM6 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Power Port 6 - (in tenths of a Watt) delivered
+ on Port 6"
+ ::= { mibObjects 19 }
+
+ portPwrM7 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Power Port 7 - (in tenths of a Watt) delivered
+ on Port 7"
+ ::= { mibObjects 20 }
+
+ portPwrM8 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Power Port 8 - (in tenths of a Watt) delivered
+ on Port 8"
+ ::= { mibObjects 21 }
+
+ modeReqM OBJECT-TYPE
+ SYNTAX OCTET STRING
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master CTM2 Port Type Setting - Master ?00?=Type
+ A (Canopy) ?10?=Type B (OFDM), ?01? = Type C
+ (POE 802.3at), ?11? (POE 802.3at 4 Pair), ?100?=(POE
+ 24V mode, CTM2 C Only) listed in order ?Port1?,
+ ?Port2?, ?Port3?, ?Port4?, ?Port5?, ?Port6?,
+ ?Port7?, ?Port8?"
+ ::= { mibObjects 39 }
+
+ trpCntGM1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Auto Restart Count Port 1 - Number of Times
+ Auto Reset Feature has executed a Circuit Breaker
+ Restart on Port 1"
+ ::= { mibObjects 45 }
+
+ trpCntGM2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Auto Restart Count Port 2 - Number of Times
+ Auto Reset Feature has executed a Circuit Breaker
+ Restart on Port 2"
+ ::= { mibObjects 46 }
+
+ trpCntGM3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Auto Restart Count Port 3 - Number of Times
+ Auto Reset Feature has executed a Circuit Breaker
+ Restart on Port 3"
+ ::= { mibObjects 47 }
+
+ trpCntGM4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Auto Restart Count Port 4 - Number of Times
+ Auto Reset Feature has executed a Circuit Breaker
+ Restart on Port 4"
+ ::= { mibObjects 48 }
+
+ trpCntGM5 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Auto Restart Count Port 5 - Number of Times
+ Auto Reset Feature has executed a Circuit Breaker
+ Restart on Port 5"
+ ::= { mibObjects 49 }
+
+ trpCntGM6 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Auto Restart Count Port 6 - Number of Times
+ Auto Reset Feature has executed a Circuit Breaker
+ Restart on Port 6"
+ ::= { mibObjects 50 }
+
+ trpCntGM7 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Auto Restart Count Port 7 - Number of Times
+ Auto Reset Feature has executed a Circuit Breaker
+ Restart on Port 7"
+ ::= { mibObjects 51 }
+
+ trpCntGM8 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Auto Restart Count Port 8 - Number of Times
+ Auto Reset Feature has executed a Circuit Breaker
+ Restart on Port 8"
+ ::= { mibObjects 52 }
+
+ trpCntBM1 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ckt Breaker Auto Restart Fail Count Port
+ 1 - Number of Times Auto Reset Feature has failed
+ to restart (after 7 tries) a Circuit Breaker
+ on Port 1"
+ ::= { mibObjects 53 }
+
+ trpCntBM2 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ckt Breaker Auto Restart Fail Count Port
+ 2 - Number of Times Auto Reset Feature has failed
+ to restart (after 7 tries) a Circuit Breaker
+ on Port 2"
+ ::= { mibObjects 54 }
+
+ trpCntBM3 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ckt Breaker Auto Restart Fail Count Port
+ 3 - Number of Times Auto Reset Feature has failed
+ to restart (after 7 tries) a Circuit Breaker
+ on Port 3"
+ ::= { mibObjects 55 }
+
+ trpCntBM4 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ckt Breaker Auto Restart Fail Count Port
+ 4 - Number of Times Auto Reset Feature has failed
+ to restart (after 7 tries) a Circuit Breaker
+ on Port 4"
+ ::= { mibObjects 56 }
+
+ trpCntBM5 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ckt Breaker Auto Restart Fail Count Port
+ 5 - Number of Times Auto Reset Feature has failed
+ to restart (after 7 tries) a Circuit Breaker
+ on Port 5"
+ ::= { mibObjects 57 }
+
+ trpCntBM6 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ckt Breaker Auto Restart Fail Count Port
+ 6 - Number of Times Auto Reset Feature has failed
+ to restart (after 7 tries) a Circuit Breaker
+ on Port 6"
+ ::= { mibObjects 58 }
+
+ trpCntBM7 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ckt Breaker Auto Restart Fail Count Port
+ 7 - Number of Times Auto Reset Feature has failed
+ to restart (after 7 tries) a Circuit Breaker
+ on Port 7"
+ ::= { mibObjects 59 }
+
+ trpCntBM8 OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION "Master Ckt Breaker Auto Restart Fail Count Port
+ 8 - Number of Times Auto Reset Feature has failed
+ to restart (after 7 tries) a Circuit Breaker
+ on Port 8"
+ ::= { mibObjects 60 }
+
+
+ lostEthernetConnection TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Lost Ethernet Connection"
+ ::= 0
+
+ masterPrimayPowerLost TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Master Primary Power Lost"
+ ::= 1
+
+ masterSecondaryPowerLost TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Master Secondary Power Lost"
+ ::= 2
+
+ gpsSignalLost TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "GPS Signal Lost"
+ ::= 3
+
+ masterTempatureError TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Master Temperature Error"
+ ::= 4
+
+ masterCircuitBreakerTripCode TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Master Circuit Breaker Trip Code - Master Breaker Tripped
+ Code: 1=Port 1, 2=Port2, 4=Port 3, 8=Port4, 16=Port5,
+ 32=Port6, 64=Port7, 128=Port8 Example: Code
+ 5 means Port 3 and Port 1 Tripped"
+ ::= 5
+
+ loginFailedAttempt TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Login Failed Attempt"
+ ::= 6
+
+ settingsChanged TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "CTM Settings Changed"
+ ::= 7
+
+ masterPrimaryPowerOK TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Master Primary Power OK"
+ ::= 10
+
+ masterSecondaryPowerOK TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Master Secondary Power OK"
+ ::= 20
+
+ gpsSignalOK TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "GPS Signal OK"
+ ::= 30
+
+ tempatureOK TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Temperature OK"
+ ::= 40
+
+ circuitBreakersOK TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Circuit Breakers OK"
+ ::= 50
+
+ masterAutoRestartCBCompletedOK TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Master Auto Restart CB Completed OK"
+ ::= 52
+
+ loginOK TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Login OK"
+ ::= 60
+
+ resetComplete TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Reset Complete"
+ ::= 80
+
+ ethernetConnectionRestored TRAP-TYPE
+ ENTERPRISE mibObjects
+ DESCRIPTION "Ethernet Connection Restored"
+ ::= 99
+
+
+END
\ No newline at end of file |