diff options
Diffstat (limited to 'MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB')
| -rw-r--r-- | MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB b/MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB new file mode 100644 index 0000000..1beab89 --- /dev/null +++ b/MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB @@ -0,0 +1,309 @@ +--
+-- sle-mpls-tp-tunnel-statistics-mib.mib
+-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
+-- Thursday, January 21, 2016 at 14:30:41
+--
+
+ SLE-MPLS-TP-TUNNEL-STATISTICS-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ sleMgmt
+ FROM DASAN-SMI
+ mplsStdMIB
+ FROM MPLS-TC-STD-MIB
+ SleControlStatusType, SleControlRequestResultType
+ FROM SLE-TC-MIB
+ zeroDotZero, TimeTicks, Unsigned32, Gauge32, Counter64,
+ OBJECT-TYPE, MODULE-IDENTITY
+ FROM SNMPv2-SMI;
+
+
+ sleMplsTpTunnelStats MODULE-IDENTITY
+ LAST-UPDATED "201501280000Z" -- January 28, 2015 at 00:00 GMT
+ ORGANIZATION
+ "Multiprotocol Label Switching (MPLS) Working Group"
+ CONTACT-INFO
+ "Gyerok Kwon
+ Dasan Networks
+ Email: grkwon@dasannetworks.com
+
+ Kantharaj B M
+ Dasan Networks
+ Email: kanth@dasannetworks.com
+
+ DongChel Shin (Chris)
+ Dasan Networks
+ Email: dchshin@dasannetworks.com
+
+ Comments about this document should be emailed
+ directly to the Dasan support email ID at
+ support@dasannetworks.com."
+ DESCRIPTION
+ "This mib contains the managed objects for MPLS-TP lsp statistics."
+ REVISION "201601180000Z" -- January 18, 2016 at 00:00 GMT
+ DESCRIPTION
+ "Initial version"
+ ::= { sleMpls 20 }
+
+
+
+
+--
+-- Node definitions
+--
+
+ sleMpls OBJECT IDENTIFIER ::= { sleMgmt 16 }
+
+
+ sleMplsTpTunnelStatsTable OBJECT IDENTIFIER ::= { sleMplsTpTunnelStats 1 }
+
+
+ sleMplsTpTunnelStatsInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF SleMplsTpTunnelStatsInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains the information about the statistics
+ of LSP which exist on the LSR or LER."
+ ::= { sleMplsTpTunnelStatsTable 1 }
+
+
+ sleMplsTpTunnelStatsInfoEntry OBJECT-TYPE
+ SYNTAX SleMplsTpTunnelStatsInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table represents the statistics of LSP.
+ The LSP can be creates by network administator or SNMP agent
+ as instruct by the MPLS-TP"
+ INDEX { sleMplsTpTunnelStatsInfoIndex }
+ ::= { sleMplsTpTunnelStatsInfoTable 1 }
+
+
+ SleMplsTpTunnelStatsInfoEntry ::=
+ SEQUENCE {
+ sleMplsTpTunnelStatsInfoIndex
+ Unsigned32,
+ sleMplsTpTunnelStatsInfoTunnelName
+ OCTET STRING,
+ sleMplsTpTunnelStatsInfoRole
+ INTEGER,
+ sleMplsTpTunnelStatsInfoFwdTxPkts
+ Counter64,
+ sleMplsTpTunnelStatsInfoFwdTxBytes
+ Counter64,
+ sleMplsTpTunnelStatsInfoFwdRxPkts
+ Counter64,
+ sleMplsTpTunnelStatsInfoFwdRxBytes
+ Counter64,
+ sleMplsTpTunnelStatsInfoRevTxPkts
+ Counter64,
+ sleMplsTpTunnelStatsInfoRevTxBytes
+ Counter64,
+ sleMplsTpTunnelStatsInfoRevRxPkts
+ Counter64,
+ sleMplsTpTunnelStatsInfoRevRxBytes
+ Counter64
+ }
+
+ sleMplsTpTunnelStatsInfoIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..65535)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Uniquely identifies a set of tunnel instances
+ between a pair of ingress and egress LSRs.
+ Managers should obtain new values for row
+ creation in this table by reading
+ mplsTunnelIndexN. When
+ the MPLS signalling protocol is rsvp(2) this value
+ SHOULD be equal to the value signaled in the
+ Tunnel Id of the Session object. When the MPLS
+ signalling protocol is crldp(3) this value
+ SHOULD be equal to the value signaled in the
+ LSP ID."
+ ::= { sleMplsTpTunnelStatsInfoEntry 1 }
+
+
+ sleMplsTpTunnelStatsInfoTunnelName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The tunnel name of the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 2 }
+
+
+ sleMplsTpTunnelStatsInfoRole OBJECT-TYPE
+ SYNTAX INTEGER
+ {
+ source(0),
+ transit(1),
+ destination(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This value signifies the role that this tunnel
+ entry/instance represents. This value MUST be set
+ to head(1) at the originating point of the tunnel.
+ This value MUST be set to transit(2) at transit
+ points along the tunnel, if transit points are
+ supported. This value MUST be set to tail(3) at the
+ terminating point of the tunnel if tunnel tails are
+ supported.
+
+ The value headTail(4) is provided for tunnels that
+ begin and end on the same LSR."
+ ::= { sleMplsTpTunnelStatsInfoEntry 3 }
+
+
+ sleMplsTpTunnelStatsInfoFwdTxPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packet sent through
+ the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 4 }
+
+
+ sleMplsTpTunnelStatsInfoFwdTxBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total bytes sent through
+ the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 5 }
+
+
+ sleMplsTpTunnelStatsInfoFwdRxPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packet recieved through
+ the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 6 }
+
+
+ sleMplsTpTunnelStatsInfoFwdRxBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total bytes recieved through the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 7 }
+
+
+ sleMplsTpTunnelStatsInfoRevTxPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packet sent through the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 8 }
+
+
+ sleMplsTpTunnelStatsInfoRevTxBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total bytes sent through
+ the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 9 }
+
+
+ sleMplsTpTunnelStatsInfoRevRxPkts OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packet recieved through
+ the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 10 }
+
+
+ sleMplsTpTunnelStatsInfoRevRxBytes OBJECT-TYPE
+ SYNTAX Counter64
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total bytes recieved through
+ the LSP."
+ ::= { sleMplsTpTunnelStatsInfoEntry 11 }
+
+
+ sleMplsTpTunnelStatsControl OBJECT IDENTIFIER ::= { sleMplsTpTunnelStatsTable 2 }
+
+
+ sleMplsTpTunnelStatsControlRequest OBJECT-TYPE
+ SYNTAX INTEGER { setToClearTunnelStats(1) }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object holds the possible read-write columns that can be
+ modified in the Vrf table. For each read-write column of Vrf
+ table, a Set Operation control value is added in this object."
+ ::= { sleMplsTpTunnelStatsControl 1 }
+
+
+ sleMplsTpTunnelStatsControlStatus OBJECT-TYPE
+ SYNTAX SleControlStatusType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object displays the status of the configuration done."
+ ::= { sleMplsTpTunnelStatsControl 2 }
+
+
+ sleMplsTpTunnelStatsControlTimer OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is based on the SLE style where a timer is configured
+ for every control table."
+ ::= { sleMplsTpTunnelStatsControl 3 }
+
+
+ sleMplsTpTunnelStatsControlTimeStamp OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object specifies the time at which the configuration is done."
+ ::= { sleMplsTpTunnelStatsControl 4 }
+
+
+ sleMplsTpTunnelStatsReqResult OBJECT-TYPE
+ SYNTAX SleControlRequestResultType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The standard result of the SET operation is stored here."
+ ::= { sleMplsTpTunnelStatsControl 5 }
+
+
+ sleMplsTpTunnelStatsControlName OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The tunnel name of the LSP.
+
+ To clear all the tunnel statistics, give the name as 'all'.
+
+ To clear the specific tunnel, give the specific tunnel name.
+ "
+ ::= { sleMplsTpTunnelStatsControl 6 }
+
+
+
+ END
+
+--
+-- sle-mpls-tp-tunnel-statistics-mib.mib
+--
|